mrf24j40: add more register defines

For supporting regmap, this patch will add more register defines to
prepare a full register dump by regmap debugfs.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
index 80b3c6e72cb377a6b5ee54ac1e7136b387f6c53e..12f0606dce3ef58c3017d53017bc42a59b38bf00 100644 (file)
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -29,21 +29,56 @@
 #define REG_SADRL      0x03  /* Short address (low) */
 #define REG_SADRH      0x04  /* Short address (high) */
 #define REG_EADR0      0x05  /* Long address (low) (high is EADR7) */
+#define REG_EADR1      0x06
+#define REG_EADR2      0x07
+#define REG_EADR3      0x08
+#define REG_EADR4      0x09
+#define REG_EADR5      0x0A
+#define REG_EADR6      0x0B
+#define REG_EADR7      0x0C
+#define REG_RXFLUSH    0x0D
+#define REG_ORDER      0x10
 #define REG_TXMCR      0x11  /* Transmit MAC control */
+#define REG_ACKTMOUT   0x12
+#define REG_ESLOTG1    0x13
+#define REG_SYMTICKL   0x14
+#define REG_SYMTICKH   0x15
 #define REG_PACON0     0x16  /* Power Amplifier Control */
 #define REG_PACON1     0x17  /* Power Amplifier Control */
 #define REG_PACON2     0x18  /* Power Amplifier Control */
+#define REG_TXBCON0    0x1A
 #define REG_TXNCON     0x1B  /* Transmit Normal FIFO Control */
+#define REG_TXG1CON    0x1C
+#define REG_TXG2CON    0x1D
+#define REG_ESLOTG23   0x1E
+#define REG_ESLOTG45   0x1F
+#define REG_ESLOTG67   0x20
+#define REG_TXPEND     0x21
+#define REG_WAKECON    0x22
+#define REG_FROMOFFSET 0x23
 #define REG_TXSTAT     0x24  /* TX MAC Status Register */
+#define REG_TXBCON1    0x25
+#define REG_GATECLK    0x26
+#define REG_TXTIME     0x27
+#define REG_HSYMTMRL   0x28
+#define REG_HSYMTMRH   0x29
 #define REG_SOFTRST    0x2A  /* Soft Reset */
+#define REG_SECCON0    0x2C
+#define REG_SECCON1    0x2D
 #define REG_TXSTBL     0x2E  /* TX Stabilization */
+#define REG_RXSR       0x30
 #define REG_INTSTAT    0x31  /* Interrupt Status */
 #define REG_INTCON     0x32  /* Interrupt Control */
 #define REG_GPIO       0x33  /* GPIO */
 #define REG_TRISGPIO   0x34  /* GPIO direction */
+#define REG_SLPACK     0x35
 #define REG_RFCTL      0x36  /* RF Control Mode Register */
+#define REG_SECCR2     0x37
+#define REG_BBREG0     0x38
 #define REG_BBREG1     0x39  /* Baseband Registers */
 #define REG_BBREG2     0x3A  /* */
+#define REG_BBREG3     0x3B
+#define REG_BBREG4     0x3C
 #define REG_BBREG6     0x3E  /* */
 #define REG_CCAEDTH    0x3F  /* Energy Detection Threshold */
 
@@ -56,12 +91,45 @@
 #define REG_RFCON6     0x206
 #define REG_RFCON7     0x207
 #define REG_RFCON8     0x208
+#define REG_SLPCAL0    0x209
+#define REG_SLPCAL1    0x20A
+#define REG_SLPCAL2    0x20B
+#define REG_RFSTATE    0x20F
 #define REG_RSSI       0x210
 #define REG_SLPCON0    0x211  /* Sleep Clock Control Registers */
 #define REG_SLPCON1    0x220
 #define REG_WAKETIMEL  0x222  /* Wake-up Time Match Value Low */
 #define REG_WAKETIMEH  0x223  /* Wake-up Time Match Value High */
+#define REG_REMCNTL    0x224
+#define REG_REMCNTH    0x225
+#define REG_MAINCNT0   0x226
+#define REG_MAINCNT1   0x227
+#define REG_MAINCNT2   0x228
+#define REG_MAINCNT3   0x229
 #define REG_TESTMODE   0x22F  /* Test mode */
+#define REG_ASSOEAR0   0x230
+#define REG_ASSOEAR1   0x231
+#define REG_ASSOEAR2   0x232
+#define REG_ASSOEAR3   0x233
+#define REG_ASSOEAR4   0x234
+#define REG_ASSOEAR5   0x235
+#define REG_ASSOEAR6   0x236
+#define REG_ASSOEAR7   0x237
+#define REG_ASSOSAR0   0x238
+#define REG_ASSOSAR1   0x239
+#define REG_UNONCE0    0x240
+#define REG_UNONCE1    0x241
+#define REG_UNONCE2    0x242
+#define REG_UNONCE3    0x243
+#define REG_UNONCE4    0x244
+#define REG_UNONCE5    0x245
+#define REG_UNONCE6    0x246
+#define REG_UNONCE7    0x247
+#define REG_UNONCE8    0x248
+#define REG_UNONCE9    0x249
+#define REG_UNONCE10   0x24A
+#define REG_UNONCE11   0x24B
+#define REG_UNONCE12   0x24C
 #define REG_RX_FIFO    0x300  /* Receive FIFO */
 
 /* Device configuration: Only channels 11-26 on page 0 are supported. */