--- /dev/null
+================================================
+Generic bitfield packing and unpacking functions
+================================================
+
+Problem statement
+-----------------
+
+When working with hardware, one has to choose between several approaches of
+interfacing with it.
+One can memory-map a pointer to a carefully crafted struct over the hardware
+device's memory region, and access its fields as struct members (potentially
+declared as bitfields). But writing code this way would make it less portable,
+due to potential endianness mismatches between the CPU and the hardware device.
+Additionally, one has to pay close attention when translating register
+definitions from the hardware documentation into bit field indices for the
+structs. Also, some hardware (typically networking equipment) tends to group
+its register fields in ways that violate any reasonable word boundaries
+(sometimes even 64 bit ones). This creates the inconvenience of having to
+define "high" and "low" portions of register fields within the struct.
+A more robust alternative to struct field definitions would be to extract the
+required fields by shifting the appropriate number of bits. But this would
+still not protect from endianness mismatches, except if all memory accesses
+were performed byte-by-byte. Also the code can easily get cluttered, and the
+high-level idea might get lost among the many bit shifts required.
+Many drivers take the bit-shifting approach and then attempt to reduce the
+clutter with tailored macros, but more often than not these macros take
+shortcuts that still prevent the code from being truly portable.
+
+The solution
+------------
+
+This API deals with 2 basic operations:
+ - Packing a CPU-usable number into a memory buffer (with hardware
+ constraints/quirks)
+ - Unpacking a memory buffer (which has hardware constraints/quirks)
+ into a CPU-usable number.
+
+The API offers an abstraction over said hardware constraints and quirks,
+over CPU endianness and therefore between possible mismatches between
+the two.
+
+The basic unit of these API functions is the u64. From the CPU's
+perspective, bit 63 always means bit offset 7 of byte 7, albeit only
+logically. The question is: where do we lay this bit out in memory?
+
+The following examples cover the memory layout of a packed u64 field.
+The byte offsets in the packed buffer are always implicitly 0, 1, ... 7.
+What the examples show is where the logical bytes and bits sit.
+
+1. Normally (no quirks), we would do it like this:
+
+63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32
+7 6 5 4
+31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
+3 2 1 0
+
+That is, the MSByte (7) of the CPU-usable u64 sits at memory offset 0, and the
+LSByte (0) of the u64 sits at memory offset 7.
+This corresponds to what most folks would regard to as "big endian", where
+bit i corresponds to the number 2^i. This is also referred to in the code
+comments as "logical" notation.
+
+
+2. If QUIRK_MSB_ON_THE_RIGHT is set, we do it like this:
+
+56 57 58 59 60 61 62 63 48 49 50 51 52 53 54 55 40 41 42 43 44 45 46 47 32 33 34 35 36 37 38 39
+7 6 5 4
+24 25 26 27 28 29 30 31 16 17 18 19 20 21 22 23 8 9 10 11 12 13 14 15 0 1 2 3 4 5 6 7
+3 2 1 0
+
+That is, QUIRK_MSB_ON_THE_RIGHT does not affect byte positioning, but
+inverts bit offsets inside a byte.
+
+
+3. If QUIRK_LITTLE_ENDIAN is set, we do it like this:
+
+39 38 37 36 35 34 33 32 47 46 45 44 43 42 41 40 55 54 53 52 51 50 49 48 63 62 61 60 59 58 57 56
+4 5 6 7
+7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24
+0 1 2 3
+
+Therefore, QUIRK_LITTLE_ENDIAN means that inside the memory region, every
+byte from each 4-byte word is placed at its mirrored position compared to
+the boundary of that word.
+
+4. If QUIRK_MSB_ON_THE_RIGHT and QUIRK_LITTLE_ENDIAN are both set, we do it
+ like this:
+
+32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
+4 5 6 7
+0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+0 1 2 3
+
+
+5. If just QUIRK_LSW32_IS_FIRST is set, we do it like this:
+
+31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
+3 2 1 0
+63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32
+7 6 5 4
+
+In this case the 8 byte memory region is interpreted as follows: first
+4 bytes correspond to the least significant 4-byte word, next 4 bytes to
+the more significant 4-byte word.
+
+
+6. If QUIRK_LSW32_IS_FIRST and QUIRK_MSB_ON_THE_RIGHT are set, we do it like
+ this:
+
+24 25 26 27 28 29 30 31 16 17 18 19 20 21 22 23 8 9 10 11 12 13 14 15 0 1 2 3 4 5 6 7
+3 2 1 0
+56 57 58 59 60 61 62 63 48 49 50 51 52 53 54 55 40 41 42 43 44 45 46 47 32 33 34 35 36 37 38 39
+7 6 5 4
+
+
+7. If QUIRK_LSW32_IS_FIRST and QUIRK_LITTLE_ENDIAN are set, it looks like
+ this:
+
+7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24
+0 1 2 3
+39 38 37 36 35 34 33 32 47 46 45 44 43 42 41 40 55 54 53 52 51 50 49 48 63 62 61 60 59 58 57 56
+4 5 6 7
+
+
+8. If QUIRK_LSW32_IS_FIRST, QUIRK_LITTLE_ENDIAN and QUIRK_MSB_ON_THE_RIGHT
+ are set, it looks like this:
+
+0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+0 1 2 3
+32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
+4 5 6 7
+
+
+We always think of our offsets as if there were no quirk, and we translate
+them afterwards, before accessing the memory region.
+
+Intended use
+------------
+
+Drivers that opt to use this API first need to identify which of the above 3
+quirk combinations (for a total of 8) match what the hardware documentation
+describes. Then they should wrap the packing() function, creating a new
+xxx_packing() that calls it using the proper QUIRK_* one-hot bits set.
+
+The packing() function returns an int-encoded error code, which protects the
+programmer against incorrect API use. The errors are not expected to occur
+durring runtime, therefore it is reasonable for xxx_packing() to return void
+and simply swallow those errors. Optionally it can dump stack or print the
+error description.
S: Orphan
F: drivers/i2c/busses/i2c-pasemi.c
+PACKING
+M: Vladimir Oltean <olteanv@gmail.com>
+L: netdev@vger.kernel.org
+S: Supported
+F: lib/packing.c
+F: include/linux/packing.h
+F: Documentation/packing.txt
+
PADATA PARALLEL EXECUTION MECHANISM
M: Steffen Klassert <steffen.klassert@secunet.com>
L: linux-crypto@vger.kernel.org
--- /dev/null
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (c) 2016-2018, NXP Semiconductors
+ * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com>
+ */
+#ifndef _LINUX_PACKING_H
+#define _LINUX_PACKING_H
+
+#include <linux/types.h>
+#include <linux/bitops.h>
+
+#define QUIRK_MSB_ON_THE_RIGHT BIT(0)
+#define QUIRK_LITTLE_ENDIAN BIT(1)
+#define QUIRK_LSW32_IS_FIRST BIT(2)
+
+enum packing_op {
+ PACK,
+ UNPACK,
+};
+
+/**
+ * packing - Convert numbers (currently u64) between a packed and an unpacked
+ * format. Unpacked means laid out in memory in the CPU's native
+ * understanding of integers, while packed means anything else that
+ * requires translation.
+ *
+ * @pbuf: Pointer to a buffer holding the packed value.
+ * @uval: Pointer to an u64 holding the unpacked value.
+ * @startbit: The index (in logical notation, compensated for quirks) where
+ * the packed value starts within pbuf. Must be larger than, or
+ * equal to, endbit.
+ * @endbit: The index (in logical notation, compensated for quirks) where
+ * the packed value ends within pbuf. Must be smaller than, or equal
+ * to, startbit.
+ * @op: If PACK, then uval will be treated as const pointer and copied (packed)
+ * into pbuf, between startbit and endbit.
+ * If UNPACK, then pbuf will be treated as const pointer and the logical
+ * value between startbit and endbit will be copied (unpacked) to uval.
+ * @quirks: A bit mask of QUIRK_LITTLE_ENDIAN, QUIRK_LSW32_IS_FIRST and
+ * QUIRK_MSB_ON_THE_RIGHT.
+ *
+ * Return: 0 on success, EINVAL or ERANGE if called incorrectly. Assuming
+ * correct usage, return code may be discarded.
+ * If op is PACK, pbuf is modified.
+ * If op is UNPACK, uval is modified.
+ */
+int packing(void *pbuf, u64 *uval, int startbit, int endbit, size_t pbuflen,
+ enum packing_op op, u8 quirks);
+
+#endif
Benchmark all available RAID6 PQ functions on init and choose the
fastest one.
+config PACKING
+ bool "Generic bitfield packing and unpacking"
+ default n
+ help
+ This option provides the packing() helper function, which permits
+ converting bitfields between a CPU-usable representation and a
+ memory representation that can have any combination of these quirks:
+ - Is little endian (bytes are reversed within a 32-bit group)
+ - The least-significant 32-bit word comes first (within a 64-bit
+ group)
+ - The most significant bit of a byte is at its right (bit 0 of a
+ register description is numerically 2^7).
+ Drivers may use these helpers to match the bit indices as described
+ in the data sheets of the peripherals they are in control of.
+
+ When in doubt, say N.
+
config BITREVERSE
tristate
obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o
obj-$(CONFIG_BITREVERSE) += bitrev.o
+obj-$(CONFIG_PACKING) += packing.o
obj-$(CONFIG_RATIONAL) += rational.o
obj-$(CONFIG_CRC_CCITT) += crc-ccitt.o
obj-$(CONFIG_CRC16) += crc16.o
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/* Copyright (c) 2016-2018, NXP Semiconductors
+ * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com>
+ */
+#include <linux/packing.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+
+static int get_le_offset(int offset)
+{
+ int closest_multiple_of_4;
+
+ closest_multiple_of_4 = (offset / 4) * 4;
+ offset -= closest_multiple_of_4;
+ return closest_multiple_of_4 + (3 - offset);
+}
+
+static int get_reverse_lsw32_offset(int offset, size_t len)
+{
+ int closest_multiple_of_4;
+ int word_index;
+
+ word_index = offset / 4;
+ closest_multiple_of_4 = word_index * 4;
+ offset -= closest_multiple_of_4;
+ word_index = (len / 4) - word_index - 1;
+ return word_index * 4 + offset;
+}
+
+static u64 bit_reverse(u64 val, unsigned int width)
+{
+ u64 new_val = 0;
+ unsigned int bit;
+ unsigned int i;
+
+ for (i = 0; i < width; i++) {
+ bit = (val & (1 << i)) != 0;
+ new_val |= (bit << (width - i - 1));
+ }
+ return new_val;
+}
+
+static void adjust_for_msb_right_quirk(u64 *to_write, int *box_start_bit,
+ int *box_end_bit, u8 *box_mask)
+{
+ int box_bit_width = *box_start_bit - *box_end_bit + 1;
+ int new_box_start_bit, new_box_end_bit;
+
+ *to_write >>= *box_end_bit;
+ *to_write = bit_reverse(*to_write, box_bit_width);
+ *to_write <<= *box_end_bit;
+
+ new_box_end_bit = box_bit_width - *box_start_bit - 1;
+ new_box_start_bit = box_bit_width - *box_end_bit - 1;
+ *box_mask = GENMASK_ULL(new_box_start_bit, new_box_end_bit);
+ *box_start_bit = new_box_start_bit;
+ *box_end_bit = new_box_end_bit;
+}
+
+/**
+ * packing - Convert numbers (currently u64) between a packed and an unpacked
+ * format. Unpacked means laid out in memory in the CPU's native
+ * understanding of integers, while packed means anything else that
+ * requires translation.
+ *
+ * @pbuf: Pointer to a buffer holding the packed value.
+ * @uval: Pointer to an u64 holding the unpacked value.
+ * @startbit: The index (in logical notation, compensated for quirks) where
+ * the packed value starts within pbuf. Must be larger than, or
+ * equal to, endbit.
+ * @endbit: The index (in logical notation, compensated for quirks) where
+ * the packed value ends within pbuf. Must be smaller than, or equal
+ * to, startbit.
+ * @op: If PACK, then uval will be treated as const pointer and copied (packed)
+ * into pbuf, between startbit and endbit.
+ * If UNPACK, then pbuf will be treated as const pointer and the logical
+ * value between startbit and endbit will be copied (unpacked) to uval.
+ * @quirks: A bit mask of QUIRK_LITTLE_ENDIAN, QUIRK_LSW32_IS_FIRST and
+ * QUIRK_MSB_ON_THE_RIGHT.
+ *
+ * Return: 0 on success, EINVAL or ERANGE if called incorrectly. Assuming
+ * correct usage, return code may be discarded.
+ * If op is PACK, pbuf is modified.
+ * If op is UNPACK, uval is modified.
+ */
+int packing(void *pbuf, u64 *uval, int startbit, int endbit, size_t pbuflen,
+ enum packing_op op, u8 quirks)
+{
+ /* Number of bits for storing "uval"
+ * also width of the field to access in the pbuf
+ */
+ u64 value_width;
+ /* Logical byte indices corresponding to the
+ * start and end of the field.
+ */
+ int plogical_first_u8, plogical_last_u8, box;
+
+ /* startbit is expected to be larger than endbit */
+ if (startbit < endbit)
+ /* Invalid function call */
+ return -EINVAL;
+
+ value_width = startbit - endbit + 1;
+ if (value_width > 64)
+ return -ERANGE;
+
+ /* Check if "uval" fits in "value_width" bits.
+ * If value_width is 64, the check will fail, but any
+ * 64-bit uval will surely fit.
+ */
+ if (op == PACK && value_width < 64 && (*uval >= (1ull << value_width)))
+ /* Cannot store "uval" inside "value_width" bits.
+ * Truncating "uval" is most certainly not desirable,
+ * so simply erroring out is appropriate.
+ */
+ return -ERANGE;
+
+ /* Initialize parameter */
+ if (op == UNPACK)
+ *uval = 0;
+
+ /* Iterate through an idealistic view of the pbuf as an u64 with
+ * no quirks, u8 by u8 (aligned at u8 boundaries), from high to low
+ * logical bit significance. "box" denotes the current logical u8.
+ */
+ plogical_first_u8 = startbit / 8;
+ plogical_last_u8 = endbit / 8;
+
+ for (box = plogical_first_u8; box >= plogical_last_u8; box--) {
+ /* Bit indices into the currently accessed 8-bit box */
+ int box_start_bit, box_end_bit, box_addr;
+ u8 box_mask;
+ /* Corresponding bits from the unpacked u64 parameter */
+ int proj_start_bit, proj_end_bit;
+ u64 proj_mask;
+
+ /* This u8 may need to be accessed in its entirety
+ * (from bit 7 to bit 0), or not, depending on the
+ * input arguments startbit and endbit.
+ */
+ if (box == plogical_first_u8)
+ box_start_bit = startbit % 8;
+ else
+ box_start_bit = 7;
+ if (box == plogical_last_u8)
+ box_end_bit = endbit % 8;
+ else
+ box_end_bit = 0;
+
+ /* We have determined the box bit start and end.
+ * Now we calculate where this (masked) u8 box would fit
+ * in the unpacked (CPU-readable) u64 - the u8 box's
+ * projection onto the unpacked u64. Though the
+ * box is u8, the projection is u64 because it may fall
+ * anywhere within the unpacked u64.
+ */
+ proj_start_bit = ((box * 8) + box_start_bit) - endbit;
+ proj_end_bit = ((box * 8) + box_end_bit) - endbit;
+ proj_mask = GENMASK_ULL(proj_start_bit, proj_end_bit);
+ box_mask = GENMASK_ULL(box_start_bit, box_end_bit);
+
+ /* Determine the offset of the u8 box inside the pbuf,
+ * adjusted for quirks. The adjusted box_addr will be used for
+ * effective addressing inside the pbuf (so it's not
+ * logical any longer).
+ */
+ box_addr = pbuflen - box - 1;
+ if (quirks & QUIRK_LITTLE_ENDIAN)
+ box_addr = get_le_offset(box_addr);
+ if (quirks & QUIRK_LSW32_IS_FIRST)
+ box_addr = get_reverse_lsw32_offset(box_addr,
+ pbuflen);
+
+ if (op == UNPACK) {
+ u64 pval;
+
+ /* Read from pbuf, write to uval */
+ pval = ((u8 *)pbuf)[box_addr] & box_mask;
+ if (quirks & QUIRK_MSB_ON_THE_RIGHT)
+ adjust_for_msb_right_quirk(&pval,
+ &box_start_bit,
+ &box_end_bit,
+ &box_mask);
+
+ pval >>= box_end_bit;
+ pval <<= proj_end_bit;
+ *uval &= ~proj_mask;
+ *uval |= pval;
+ } else {
+ u64 pval;
+
+ /* Write to pbuf, read from uval */
+ pval = (*uval) & proj_mask;
+ pval >>= proj_end_bit;
+ if (quirks & QUIRK_MSB_ON_THE_RIGHT)
+ adjust_for_msb_right_quirk(&pval,
+ &box_start_bit,
+ &box_end_bit,
+ &box_mask);
+
+ pval <<= box_end_bit;
+ ((u8 *)pbuf)[box_addr] &= ~box_mask;
+ ((u8 *)pbuf)[box_addr] |= pval;
+ }
+ }
+ return 0;
+}
+EXPORT_SYMBOL(packing);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Generic bitfield packing and unpacking");
projects / openwrt / staging / blogic.git / commitdiff