cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "edimax:green:power";
gpios = <&gpio0 9 1>;
};
+
wlan {
label = "edimax:amber:wlan";
gpios = <&gpio0 14 1>;
};
+
3g {
label = "edimax:blue:3g";
gpios = <&gpio0 7 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
wps {
label = "wps";
gpios = <&gpio0 12 1>;
linux,code = <0x211>;
};
+
wlanswitch {
label = "wlanswitch";
gpios = <&gpio0 13 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
wlan {
label = "edimax:amber:wlan";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
wps {
label = "wps";
gpios = <&gpio0 12 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
};
};
};
+
gpio1: gpio@660 {
status = "okay";
};
gpio-leds {
compatible = "gpio-leds";
+
ap {
label = "tenda:blue:ap";
gpios = <&gpio0 7 1>;
};
+
3g {
label = "tenda:blue:3g";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 0 1>;
gpios = <&gpio0 13 0>;
};
};
-
};
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
3grouter {
label = "tenda:blue:3grouter";
gpios = <&gpio0 11 1>;
};
+
ap {
label = "tenda:blue:ap";
gpios = <&gpio0 12 1>;
};
+
wisprouter {
label = "tenda:blue:wisprouter";
gpios = <&gpio0 9 1>;
};
+
wirelessrouter {
label = "tenda:blue:wirelessrouter";
gpios = <&gpio0 13 1>;
};
+
3g {
label = "tenda:blue:3g";
gpios = <&gpio0 7 1>;
};
+
wpsreset {
label = "tenda:blue:wpsreset";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 0 1>;
linux,code = <0x198>;
};
+
mode {
label = "mode";
gpios = <&gpio0 10 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
};
};
};
+
gpio1: gpio@660 {
status = "okay";
};
gpio-leds {
compatible = "gpio-leds";
+
system {
label = "a5-v11:blue:system";
gpios = <&gpio0 20 1>;
};
+
power {
label = "a5-v11:red:power";
gpios = <&gpio0 17 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 0 1>;
gpio-export,output = <1>;
gpios = <&gpio0 7 0>;
};
+
root_hub {
gpio-export,name = "root_hub";
gpio-export,output = <1>;
gpio-leds {
compatible = "gpio-leds";
+
wan {
label = "aigale:blue:wan";
gpios = <&gpio2 4 1>;
};
+
wlan {
label = "aigale:blue:wlan";
gpios = <&gpio3 0 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 12 1>;
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
wlan {
label = "airlive:green:wlan";
gpios = <&gpio0 8 0>;
};
+
mobile {
label = "airlive:green:mobile";
gpios = <&gpio0 9 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
wps {
label = "wps";
gpios = <&gpio0 7 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
usb {
label = "hw550-3g:green:usb";
gpios = <&gpio0 8 1>;
};
+
3g {
label = "hw550-3g:green:3g";
gpios = <&gpio0 11 1>;
};
+
status {
label = "hw550-3g:green:status";
gpios = <&gpio0 12 1>;
};
+
wps {
label = "hw550-3g:green:wps";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
connect {
label = "connect";
gpios = <&gpio0 7 1>;
linux,code = <0xda>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
rssilow {
label = "all0256n:green:rssilow";
gpios = <&gpio0 14 1>;
};
+
rssimed {
label = "all0256n:green:rssimed";
gpios = <&gpio0 12 1>;
};
+
rssihigh {
label = "all0256n:green:rssihigh";
gpios = <&gpio0 13 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 0 1>;
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
rssilow {
label = "all0256n:green:rssilow";
gpios = <&gpio0 14 1>;
};
+
rssimed {
label = "all0256n:green:rssimed";
gpios = <&gpio0 12 1>;
};
+
rssihigh {
label = "all0256n:green:rssihigh";
gpios = <&gpio0 13 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 0 1>;
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
i2c-gpio {
compatible = "i2c-gpio";
-
gpios = <&gpio0 1 0 &gpio0 2 0>;
i2c-gpio,delay-us = <10>;
gpio-leds {
compatible = "gpio-leds";
+
ld1 {
label = "allnet:green:ld1";
gpios = <&pcf0 0 1>;
};
+
ld2 {
label = "allnet:green:ld2";
gpios = <&pcf0 1 1>;
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
i2c-gpio {
compatible = "i2c-gpio";
-
gpios = <&gpio0 1 0 &gpio0 2 0>;
i2c-gpio,delay-us = <10>;
gpio-leds {
compatible = "gpio-leds";
+
ld1 {
label = "allnet:green:ld1";
gpios = <&pcf0 0 1>;
};
+
ld2 {
label = "allnet:green:ld2";
gpios = <&pcf0 1 1>;
mdio-bus {
status = "okay";
+
phy0: ethernet-phy@0 {
phy-mode = "mii";
reg = <0>;
cfi@bdc00000 {
compatible = "cfi-flash";
reg = <0xbc400000 0x800000>;
-
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
+
reset {
label = "reset";
gpios = <&gpio0 9 1>;
mdio-bus {
status = "okay";
+
phy0: ethernet-phy@0 {
phy-mode = "mii";
reg = <0>;
cfi@bdc00000 {
compatible = "cfi-flash";
reg = <0xbc400000 0x800000>;
-
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
+
reset {
label = "reset";
gpios = <&gpio0 9 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
run {
label = "argus-atp52b:green:run";
gpios = <&gpio0 9 1>;
};
+
net {
label = "argus-atp52b:amber:net";
gpios = <&gpio0 13 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x30000>;
read-only;
};
+
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
+
partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
+
partition@50000 {
label = "firmware";
reg = <0x50000 0xf80000>;
};
+
partition@fd0000 {
label = "cert";
reg = <0xfd0000 0x10000>;
read-only;
};
+
partition@fe0000 {
label = "langpack";
reg = <0xfe0000 0x10000>;
read-only;
};
+
devdata: partition@ff0000 {
label = "devdata";
reg = <0xff0000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 0>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 12 0>;
gpio-leds {
compatible = "gpio-leds";
+
eth {
label = "asl26555:green:eth";
gpios = <&gpio0 0 1>;
};
+
wan-red {
label = "asl26555:red:wan";
gpios = <&gpio0 1 0>;
};
+
wan-green {
label = "asl26555:green:wan";
gpios = <&gpio0 2 0>;
};
+
wlan {
label = "asl26555:green:wlan";
gpios = <&gpio0 7 0>;
};
+
power-green {
label = "asl26555:green:power";
gpios = <&gpio0 8 0>;
};
+
power-red {
label = "asl26555:red:power";
gpios = <&gpio0 9 0>;
};
+
3g-green {
label = "asl26555:green:3g";
gpios = <&gpio0 14 1>;
};
+
3g-red {
label = "asl26555:red:3g";
gpios = <&gpio0 17 1>;
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x30000>;
read-only;
};
+
ubootenv: partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
+
partition@40000 {
label = "rgdb";
reg = <0x40000 0x10000>;
read-only;
};
+
partition@50000 {
label = "firmware";
reg = <0x50000 0x790000>;
};
+
partition@7e0000 {
label = "cert";
reg = <0x7e0000 0x10000>;
read-only;
};
+
partition@7f0000 {
label = "langpack";
reg = <0x7f0000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 0>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 12 0>;
gpio-leds {
compatible = "gpio-leds";
+
eth {
label = "asl26555:green:eth";
gpios = <&gpio0 0 1>;
};
+
wan-red {
label = "asl26555:red:wan";
gpios = <&gpio0 1 0>;
};
+
wan-green {
label = "asl26555:green:wan";
gpios = <&gpio0 2 0>;
};
+
wlan {
label = "asl26555:green:wlan";
gpios = <&gpio0 7 0>;
};
+
power-green {
label = "asl26555:green:power";
gpios = <&gpio0 8 0>;
};
+
power-red {
label = "asl26555:red:power";
gpios = <&gpio0 9 0>;
};
+
3g-green {
label = "asl26555:green:3g";
gpios = <&gpio0 14 1>;
};
+
3g-red {
label = "asl26555:red:3g";
gpios = <&gpio0 17 1>;
/ {
compatible = "AWAPN2403", "ralink,rt3052-soc";
- model = "AsiaRF AWAPN2403";
+ model = "AsiaRF AWAPN2403";
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
link {
label = "asiarf:green:wps";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 0 1>;
gpio-leds {
compatible = "gpio-leds";
+
tx {
label = "awm002-evb:green:tx";
gpios = <&gpio0 15 1>;
};
+
rx {
label = "awm002-evb:green:rx";
gpios = <&gpio0 16 1>;
};
+
wps {
label = "awm002-evb:green:wps";
gpios = <&gpio0 21 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset_wps {
label = "reset_wps";
gpios = <&gpio0 0 1>;
linux,code = <0x198>;
};
+
mode {
label = "mode";
gpios = <&gpio0 20 1>;
gpio-leds {
compatible = "gpio-leds";
+
tx {
label = "awm002-evb:green:tx";
gpios = <&gpio0 15 1>;
};
+
rx {
label = "awm002-evb:green:rx";
gpios = <&gpio0 16 1>;
};
+
wps {
label = "awm002-evb:green:wps";
gpios = <&gpio0 21 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset_wps {
label = "reset_wps";
gpios = <&gpio0 0 1>;
linux,code = <0x198>;
};
+
mode {
label = "mode";
gpios = <&gpio0 20 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
ld1 {
label = "asiarf:green:ld1";
gpios = <&gpio0 0 1>;
};
+
ld2 {
label = "asiarf:green:ld2";
gpios = <&gpio0 1 1>;
gpio-leds {
compatible = "gpio-leds";
+
tx {
label = "awm002-evb:green:tx";
gpios = <&gpio0 15 1>;
};
+
rx {
label = "awm002-evb:green:rx";
gpios = <&gpio0 16 1>;
};
+
wps {
label = "awm002-evb:green:wps";
gpios = <&gpio0 21 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset_wps {
label = "reset_wps";
gpios = <&gpio0 0 1>;
linux,code = <0x198>;
};
+
mode {
label = "mode";
gpios = <&gpio0 20 1>;
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
-
mtd-mac-address = <&rom 0xf100>;
ralink,port-map = "wllll";
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
usb {
label = "bc2:blue:usb";
gpios = <&gpio0 20 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 17 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "edimax:green:power";
gpios = <&gpio0 9 1>;
};
+
wlan {
label = "edimax:orange:wlan";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset_wps {
label = "reset_wps";
gpios = <&gpio0 12 1>;
linux,code = <0x198>;
};
+
rfkill {
label = "RFKILL switch";
gpios = <&gpio0 13 1>;
pci@10140000 {
status = "okay";
-
pinctrl-names = "default";
pinctrl-0 = <&pci_pins>;
+
pci_pins: pci {
pci {
ralink,group = "pci";
host-bridge {
pci-bridge@1 {
status = "okay";
+
wmac@0,0 {
ralink,5ghz = <0>;
compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
-
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
reset {
label = "reset";
gpios = <&gpio0 7 1>;
linux,code = <0x198>;
};
+
rfkill {
label = "rfkill";
gpios = <&gpio0 9 1>;
label = "edimax:green:power";
gpios = <&gpio0 10 1>;
};
+
wlan {
label = "edimax:amber:wlan";
gpios = <&gpio0 11 1>;
};
+
wlan_5ghz {
label = "edimax:amber:wlan_5ghz";
gpios = <&gpio0 14 1>;
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
+
usb {
gpio-export,name="usb";
gpio-export,output=<0>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
diskmounted {
label = "red:diskmounted";
gpios = <&gpio0 9 1>;
};
+
wps_active {
label = "red:wps_active";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
factory {
label = "Factory Reset button";
gpios = <&gpio0 13 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
i2c-gpio {
compatible = "i2c-gpio";
-
gpios = <&gpio0 1 0 &gpio0 2 0>;
i2c-gpio,delay-us = <10>;
};
chosen {
bootargs = "console=ttyS0,115200";
- };
+ };
palmbus@10000000 {
gpio0: gpio@600 {
};
};
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 2 1>;
- linux,code = <0x198>;
- };
- };
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 2 1>;
+ linux,code = <0x198>;
+ };
+ };
};
pci@10140000 {
status = "okay";
-
pinctrl-names = "default";
pinctrl-0 = <&pci_pins>;
+
pci_pins: pci {
pci {
ralink,group = "pci";
host-bridge {
pci-bridge@1 {
status = "okay";
+
wmac@0,0 {
ralink,5ghz = <0>;
compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
-
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x30000>;
read-only;
};
+
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x4000>;
read-only;
};
+
factory: partition@34000 {
label = "factory";
reg = <0x34000 0x4000>;
read-only;
};
+
partition@38000 {
label = "nvram";
reg = <0x38000 0x8000>;
read-only;
};
+
partition@40000 {
label = "devdata";
reg = <0x40000 0x10000>;
};
+
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
reset {
label = "reset";
gpios = <&gpio0 6 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 3 1>;
gpio-leds {
compatible = "gpio-leds";
+
wps {
label = "samsung:blue:wps";
gpios = <&gpio0 0 1>;
};
+
usb {
label = "samsung:blue:usb";
gpios = <&gpio1 1 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "d105:red:power";
gpios = <&gpio0 0 1>;
};
+
wps {
label = "d105:green:usb";
gpios = <&gpio0 13 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "d-link:blue:power";
gpios = <&gpio0 8 1>;
};
+
power2 {
label = "d-link:red:power";
gpios = <&gpio0 9 1>;
};
+
wps {
label = "d-link:blue:wps";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
+
rt {
label = "rt";
gpios = <&gpio0 11 1>;
linux,code = <0x100>;
};
+
ap {
label = "ap";
gpios = <&gpio0 7 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x400000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
wifi {
label = "d-link:red:alert";
gpios = <&gpio0 8 1>;
};
+
power {
label = "d-link:green:status";
gpios = <&gpio0 9 1>;
};
+
wps {
label = "d-link:blue:wps";
gpios = <&gpio0 13 1>;
gpios = <&gpio0 0 1>;
linux,code = <0x101>;
};
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
/include/ "rt5350.dtsi"
/ {
- compatible = "DCS-930L-B1", "ralink,rt5350-soc";
+ compatible = "DCS-930L-B1", "ralink,rt5350-soc";
model = "D-Link DCS-930L B1";
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "d-link:red:power";
gpios = <&gpio0 17 1>;
};
+
wps {
label = "d-link:blue:wps";
gpios = <&gpio0 19 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 0 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 20 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
gpio-leds {
compatible = "gpio-leds";
+
status {
label = "d-link:amber:status";
gpios = <&gpio0 8 1>;
};
+
status2 {
label = "d-link:green:status";
gpios = <&gpio0 9 1>;
};
+
wan {
label = "d-link:amber:wan";
gpios = <&gpio0 14 1>;
};
+
wan2 {
label = "d-link:green:wan";
gpios = <&gpio0 12 1>;
};
+
wps {
label = "d-link:blue:wps";
gpios = <&gpio0 13 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
mtd-mac-address = <&factory 0x4>;
};
- esw@10110000 {
- ralink,portmap = <0x2f>;
- ralink,led_polarity = <0x17>;
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- status {
- label = "d-link:green:status";
- gpios = <&gpio0 9 1>;
- };
- wps {
- label = "d-link:blue:wps";
- gpios = <&gpio0 13 1>;
- };
- };
-
- gpio-keys-polled {
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 10 1>;
- linux,code = <0x198>;
- };
- wps {
- label = "wps";
- gpios = <&gpio0 0 1>;
- linux,code = <0x211>;
- };
- };
- };
+ esw@10110000 {
+ ralink,portmap = <0x2f>;
+ ralink,led_polarity = <0x17>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "d-link:green:status";
+ gpios = <&gpio0 9 1>;
+ };
+
+ wps {
+ label = "d-link:blue:wps";
+ gpios = <&gpio0 13 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 1>;
+ linux,code = <0x198>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 1>;
+ linux,code = <0x211>;
+ };
+ };
wmac@10180000 {
status = "okay";
ralink,mtd-eeprom = <&factory 0>;
};
};
-
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
status {
label = "d-link:green:status";
gpios = <&gpio0 9 1>;
};
+
usb {
label = "d-link:green:usb";
gpios = <&gpio0 14 1>;
};
+
wps {
label = "d-link:green:wps";
gpios = <&gpio0 13 1>;
};
gpio-keys-polled {
- gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 10 1>;
- linux,code = <0x198>;
- };
- wps {
- label = "wps";
- gpios = <&gpio0 0 1>;
- linux,code = <0x211>;
- };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 1>;
+ linux,code = <0x198>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 1>;
+ linux,code = <0x211>;
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
gpio-leds {
compatible = "gpio-leds";
+
status {
label = "d-link:amber:status";
gpios = <&gpio0 8 1>;
};
+
status2 {
label = "d-link:green:status";
gpios = <&gpio0 9 1>;
};
+
wan {
label = "d-link:amber:wan";
gpios = <&gpio0 14 1>;
};
+
wan2 {
label = "d-link:green:wan";
gpios = <&gpio0 12 1>;
};
+
wps {
label = "d-link:blue:wps";
gpios = <&gpio0 13 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
gpio-leds {
compatible = "gpio-leds";
+
status {
label = "d-link:amber:status";
gpios = <&gpio0 8 1>;
};
+
status2 {
label = "d-link:green:status";
gpios = <&gpio0 9 1>;
};
+
wan {
label = "d-link:amber:wan";
gpios = <&gpio0 14 1>;
};
+
wan2 {
label = "d-link:green:wan";
gpios = <&gpio0 12 1>;
};
+
wps {
label = "d-link:blue:wps";
gpios = <&gpio0 13 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
status {
label = "d-link:green:status";
gpios = <&gpio0 9 1>;
};
+
wps {
label = "d-link:green:wps";
gpios = <&gpio0 13 1>;
};
gpio-keys-polled {
- gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 10 1>;
- linux,code = <0x198>;
- };
- wps {
- label = "wps";
- gpios = <&gpio0 0 1>;
- linux,code = <0x211>;
- };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 1>;
+ linux,code = <0x198>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 1>;
+ linux,code = <0x211>;
};
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
gpio-leds {
compatible = "gpio-leds";
+
status {
label = "d-link:amber:status";
gpios = <&gpio0 8 1>;
};
+
status2 {
label = "d-link:green:status";
gpios = <&gpio0 9 1>;
};
+
wan {
label = "d-link:amber:wan";
gpios = <&gpio0 14 1>;
};
+
wan2 {
label = "d-link:green:wan";
gpios = <&gpio0 12 1>;
};
+
wps {
label = "d-link:blue:wps";
gpios = <&gpio0 13 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
ralink,group = "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
+
rgmii {
ralink,group = "rgmii";
ralink,function = "rgmii";
};
+
mdio {
ralink,group = "mdio";
ralink,function = "mdio";
gpio-leds {
compatible = "gpio-leds";
+
status {
label = "d-link:amber:status";
gpios = <&gpio0 7 0>;
};
+
status2 {
label = "d-link:green:status";
gpios = <&gpio0 9 0>;
};
+
wan {
label = "d-link:amber:wan";
gpios = <&gpio0 12 1>;
};
+
wan2 {
label = "d-link:green:wan";
gpios = <&gpio0 13 1>;
};
+
wps {
label = "d-link:blue:wps";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
gpio-leds {
compatible = "gpio-leds";
+
status {
label = "d-link:amber:status";
gpios = <&gpio0 8 1>;
};
+
status2 {
label = "d-link:green:status";
gpios = <&gpio0 9 1>;
};
+
wan {
label = "d-link:amber:wan";
gpios = <&gpio0 14 1>;
};
+
wan2 {
label = "d-link:green:wan";
gpios = <&gpio0 12 1>;
};
+
wps {
label = "d-link:blue:wps";
gpios = <&gpio0 13 0>;
};
+
wps2 {
label = "d-link:amber:wps";
gpios = <&gpio0 11 0>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
ralink,group = "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
+
rgmii {
ralink,group = "rgmii";
ralink,function = "rgmii";
};
+
mdio {
ralink,group = "mdio";
ralink,function = "mdio";
gpio-leds {
compatible = "gpio-leds";
+
status {
label = "d-link:green:status";
gpios = <&gpio0 9 1>;
};
+
wifi {
label = "d-link:green:wifi";
gpios = <&gpio0 17 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset_wps {
label = "reset_wps";
gpios = <&gpio0 7 1>;
reg = <0 0>;
linux,modalias = "m25p80";
spi-max-frequency = <25000000>;
+
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
+
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x4000>;
read-only;
};
+
factory: partition@34000 {
label = "factory";
reg = <0x34000 0x4000>;
read-only;
};
+
partition@38000 {
label = "nvram";
reg = <0x38000 0x8000>;
read-only;
};
+
partition@40000 {
label = "devdata";
reg = <0x40000 0x10000>;
};
+
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
ethernet@10100000 {
mtd-mac-address = <&factory 0x4>;
+
port@0 {
ralink,fixed-link = <1000 1 1 0>;
};
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
reset {
label = "reset";
gpios = <&gpio0 9 0>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 14 0>;
label = "d-link:green:inet";
gpios = <&gpio0 0 1>;
};
+
wps {
label = "d-link:green:wps";
gpios = <&gpio1 2 0>;
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
+
usb {
gpio-export,name = "usb";
gpio-export,output = <1>;
gsw@10110000 {
ralink,port4 = "ephy";
-
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
};
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x100>;
};
+
wps {
label = "wps";
gpios = <&gpio0 2 1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "d-link:green:power";
gpios = <&gpio0 9 0>;
};
+
wan {
label = "d-link:orange:wan";
gpios = <&gpio0 12 0>;
};
+
status {
label = "d-link:orange:power";
gpios = <&gpio0 13 0>;
mediatek,2ghz = <0>;
};
};
+
pcie1 {
mt76@1,0 {
reg = <0x0000 0 0 0 0>;
ethernet@10100000 {
status = "okay";
-
mtd-mac-address = <&factory 0x28>;
-
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
reg = <0>;
phy-mode = "rgmii";
};
+
phy1: ethernet-phy@1 {
reg = <1>;
phy-mode = "rgmii";
};
+
phy2: ethernet-phy@2 {
reg = <2>;
phy-mode = "rgmii";
};
+
phy3: ethernet-phy@3 {
reg = <3>;
phy-mode = "rgmii";
};
+
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
+
phy1f: ethernet-phy@1f {
reg = <0x1f>;
phy-mode = "rgmii";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 1 0>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 2 0>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "linksys:green:power";
gpios = <&gpio0 10 1>;
};
+
wan {
label = "linksys:green:wps";
gpios = <&gpio0 12 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "esr-9753:orange:power";
gpios = <&gpio0 8 1>;
};
+
wps {
label = "esr-9753:orange:wps";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
reg = <0x0 0x30000>;
read-only;
};
+
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
+
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
+
partition@50000 {
label = "linux";
reg = <0x50000 0x3b0000>;
status = "okay";
mtd-mac-address = <&factory 0x4>;
- port@0 {
+ port@0 {
ralink,fixed-link = <1000 1 1 1>;
};
};
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
+
reset {
label = "reset";
gpios = <&gpio0 9 1>;
label = "f5d8235-v1:blue:storage";
gpios = <&gpio0 7 1>;
};
+
storage2 {
label = "f5d8235-v1:orange:storage";
gpios = <&gpio0 8 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
internet {
label = "f5d8235v2:blue:internet";
gpios = <&gpio0 5 1>;
};
+
internet2 {
label = "f5d8235v2:amber:internet";
gpios = <&gpio0 6 1>;
};
+
modem {
label = "f5d8235v2:blue:modem";
gpios = <&gpio0 11 1>;
};
+
modem2 {
label = "f5d8235v2:amber:modem";
gpios = <&gpio0 8 1>;
};
+
router {
label = "f5d8235v2:blue:router";
gpios = <&gpio0 9 1>;
};
+
storage {
label = "f5d8235v2:blue:storage";
gpios = <&gpio0 23 1>;
};
+
storage2 {
label = "f5d8235v2:amber:storage";
gpios = <&gpio0 22 1>;
};
+
security {
label = "f5d8235v2:blue:security";
gpios = <&gpio0 13 1>;
};
+
security2 {
label = "f5d8235v2:amber:security";
gpios = <&gpio0 12 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
status {
label = "belkin:blue:status";
gpios = <&gpio0 7 1>;
};
+
power {
label = "belkin:blue:power";
gpios = <&gpio0 9 1>;
};
+
orange {
label = "belkin:orange:status";
gpios = <&gpio0 11 1>;
};
+
relay {
label = "belkin:device:relay";
gpios = <&gpio0 13 0>;
};
};
+
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
top {
label = "top";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
power {
label = "power";
gpios = <&gpio0 12 1>;
linux,code = <0x100>;
};
+
sensor {
label = "sensor";
gpios = <&gpio0 14 1>;
label = "firmware";
reg = <0x50000 0xfb0000>;
};
-
};
};
};
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
wps {
label = "wps";
gpios = <&gpio0 18 1>;
linux,code = <0x211>;
};
+
power {
label = "power";
gpios = <&gpio0 23 1>;
pinctrl {
state_default: pinctrl0 {
- gpio {
+ gpio {
ralink,group = "wdt", "rgmii2";
ralink,function = "gpio";
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
wifi {
label = "fonera20n:orange:wifi";
gpios = <&gpio0 7 1>;
};
+
power {
label = "fonera20n:green:power";
gpios = <&gpio0 9 1>;
};
+
usb {
label = "fonera20n:orange:usb";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 12 1>;
linux,code = <0x198>;
};
+
switch {
label = "switch";
gpios = <&gpio0 13 1>;
swconfig,segment = "lan";
swconfig,portmap = <0 4>;
};
+
port@1 {
compatible = "swconfig,port";
swconfig,segment = "lan";
swconfig,portmap = <1 3>;
};
+
port@2 {
compatible = "swconfig,port";
swconfig,segment = "lan";
swconfig,portmap = <2 2>;
};
+
port@3 {
compatible = "swconfig,port";
swconfig,segment = "lan";
swconfig,portmap = <3 1>;
};
+
port@4 {
compatible = "swconfig,port";
swconfig,segment = "wan";
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-export {
compatible = "gpio-export";
+
// Used to enable power-over-ethernet passthrough from port0 to port1.
// Disable passthrough by default to prevent accidental equipment damage.
poe {
gpio-leds {
compatible = "gpio-leds";
+
// The following leds are defined in the ArcOS firmware, but reportedly
// not present in the Freestation5 device.
wifi {
label = "freestation:unknown:wifi";
gpios = <&gpio0 7 1>;
};
+
powerg {
label = "freestation:unknown:powerg";
gpios = <&gpio0 9 1>;
};
+
usb {
label = "freestation:unknown:usb";
gpios = <&gpio0 14 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x1000000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "hg255d:power";
gpios = <&gpio0 8 1>;
};
+
internet {
label = "hg255d:internet";
gpios = <&gpio0 13 1>;
};
+
wifi {
label = "hg255d:wlan";
gpios = <&gpio0 14 1>;
};
+
usb {
label = "hg255d:usb";
gpios = <&gpio0 9 1>;
};
+
wps {
label = "hg255d:wps";
gpios = <&gpio0 12 1>;
};
+
voice {
label = "hg255d:voice";
gpios = <&gpio0 5 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <10>;
+
reset {
label = "reset";
gpios = <&gpio0 4 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 10 1>;
linux,code = <0x211>;
};
+
rfkill {
label = "rfkill";
gpios = <&gpio0 0 1>;
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
wps {
label = "reset";
gpios = <&gpio0 14 1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "hlk-rm04:red:power";
gpios = <&gpio0 0 1>;
gpio0: gpio@600 {
status = "okay";
};
+
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0 0>;
linux,modalias = "m25p80", "mx25l6405d";
spi-max-frequency = <10000000>;
+
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
+
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
+
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
+
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
gpio-leds {
compatible = "gpio-leds";
+
wlan {
label = "ht-tm02:blue:wlan";
gpios = <&gpio0 7 1>;
};
+
lan {
label = "ht-tm02:green:lan";
gpios = <&gpio0 12 1>;
};
-
};
gpio-keys-polled {
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
modeswitch {
label = "modeswitch";
gpios = <&gpio0 14 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
usb {
label = "hw550-3g:green:usb";
gpios = <&gpio0 8 1>;
};
+
3g {
label = "hw550-3g:green:3g";
gpios = <&gpio0 11 1>;
};
+
status {
label = "hw550-3g:green:status";
gpios = <&gpio0 12 1>;
};
+
wps {
label = "hw550-3g:green:wps";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
connect {
label = "connect";
gpios = <&gpio0 7 1>;
linux,code = <0xda>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
run {
label = "ip2202:green:run";
gpios = <&gpio0 9 1>;
};
+
net {
label = "ip2202:amber:net";
gpios = <&gpio0 13 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
wifi {
label = "m2m:blue:wifi";
gpios = <&gpio0 7 1>;
};
+
wan {
label = "m2m:green:wan";
gpios = <&gpio0 12 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
power {
label = "power";
gpios = <&gpio0 1 1>;
linux,code = <0x116>;
};
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
status {
label = "m3:blue:status";
gpios = <&gpio0 9 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
mode {
label = "mode";
gpios = <&gpio0 17 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
status {
label = "m4:blue:status";
gpios = <&gpio0 9 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
status {
label = "m4:blue:status";
gpios = <&gpio0 9 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
partition@fb0000 {
label = "user-config";
reg = <0xfb0000 0x50000>;
-
};
};
};
gpio-leds {
compatible = "gpio-leds";
+
system {
label = "kingston:blue:system";
gpios = <&gpio2 3 1>;
};
+
wifi {
label = "kingston:blue:wifi";
gpios = <&gpio3 0 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
+
system {
label = "system";
gpios = <&gpio0 2 1>;
gpio-leds {
compatible = "gpio-leds";
+
system {
label = "kingston:blue:system";
gpios = <&gpio2 3 1>;
};
+
wifi {
label = "kingston:blue:wifi";
gpios = <&gpio3 0 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
+
system {
label = "system";
gpios = <&gpio0 2 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
usb {
label = "mofi3500-3gn:green:usb";
gpios = <&gpio0 8 1>;
};
+
3g {
label = "mofi3500-3gn:green:3g";
gpios = <&gpio0 11 1>;
};
+
status {
label = "mofi3500-3gn:green:status";
gpios = <&gpio0 12 1>;
};
+
wps {
label = "mofi3500-3gn:green:wps";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
connect {
label = "connect";
gpios = <&gpio0 7 1>;
linux,code = <0xda>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
};
};
};
+
gpio1: gpio@660 {
status = "okay";
};
gpio-leds {
compatible = "gpio-leds";
+
system {
label = "hame:blue:system";
gpios = <&gpio0 20 1>;
};
+
power {
label = "hame:red:power";
gpios = <&gpio0 17 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
wps {
label = "reset";
gpios = <&gpio0 0 1>;
gpio-export,output = <1>;
gpios = <&gpio0 7 0>;
};
+
root_hub {
gpio-export,name = "root_hub";
gpio-export,output = <1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
system {
label = "hame:blue:system";
gpios = <&gpio0 20 1>;
};
+
power {
label = "hame:red:power";
gpios = <&gpio0 17 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
wps {
label = "reset";
gpios = <&gpio0 0 1>;
gpio-export,output = <1>;
gpios = <&gpio0 7 0>;
};
+
root_hub {
gpio-export,name = "root_hub";
gpio-export,output = <1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
usb {
label = "mr-102n:green:usb";
gpios = <&gpio0 8 1>;
};
+
status {
label = "mr-102n:amber:status";
gpios = <&gpio0 9 1>;
};
+
wlan {
label = "mr-102n:green:wlan";
gpios = <&gpio0 11 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 13 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 18 1>;
ethernet@10100000 {
status = "okay";
-
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
ralink,port-map = "llllw";
port@4 {
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
s2 {
label = "S2";
gpios = <&gpio0 1 1>;
linux,code = <0x100>;
};
+
s3 {
label = "S3";
gpios = <&gpio0 2 1>;
ethernet@10100000 {
status = "okay";
-
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
ralink,port-map = "llllw";
port@5 {
reg = <0>;
phy-mode = "rgmii";
};
+
phy1: ethernet-phy@1 {
reg = <1>;
phy-mode = "rgmii";
};
+
phy2: ethernet-phy@2 {
reg = <2>;
phy-mode = "rgmii";
};
+
phy3: ethernet-phy@3 {
reg = <3>;
phy-mode = "rgmii";
};
+
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
+
phy1f: ethernet-phy@1f {
reg = <0x1f>;
phy-mode = "rgmii";
ethernet@10100000 {
status = "okay";
-
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
-
ralink,port-map = "llllw";
};
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
wps {
label = "wps";
gpios = <&gpio0 12 1>;
linux,code = <0x100>;
};
+
reset {
label = "reset";
gpios = <&gpio0 13 1>;
compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
model = "Ralink MT7620a V22SG High Power evaluation board";
- /*palmbus@10000000 {
- };*/
-
pinctrl {
state_default: pinctrl0 {
gpio {
ethernet@10100000 {
status = "okay";
-
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
ralink,port-map = "llllw";
port@4 {
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
+
aoss {
label = "aoss";
gpios = <&gpio0 2 1>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "mtk,mt7620-nand";
+
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
+
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x20000>;
read-only;
};
+
factory: partition@60000 {
label = "factory";
reg = <0x60000 0x20000>;
read-only;
};
+
partition@80000 {
label = "firmware";
reg = <0x80000 0x7f80000>;
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
-
mtd-mac-address = <&factory 0x4>;
ralink,port-map = "llllw";
};
gpio-leds {
compatible = "gpio-leds";
+
wps {
label = "mzk750:green:wps";
gpios = <&gpio1 11 1>;
};
+
power {
label = "mzk750:green:power";
gpios = <&gpio1 15 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
s1 {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x100>;
};
+
s2 {
label = "wps";
gpios = <&gpio0 2 1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "mzkdp150n:green:power";
gpios = <&gpio0 9 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "mzkw300nh2:green:power";
gpios = <&gpio0 9 1>;
};
+
wlan {
label = "mzkw300nh2:amber:wlan";
gpios = <&gpio0 14 1>;
};
+
wps {
label = "mzkw300nh2:amber:wps";
gpios = <&gpio0 11 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
wps {
label = "wps";
gpios = <&gpio0 12 1>;
linux,code = <0x211>;
};
+
reset {
label = "reset";
gpios = <&gpio0 0 1>;
linux,code = <0x198>;
};
+
rt {
label = "rt";
gpios = <&gpio0 13 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 2 1>;
linux,code = <0x211>;
};
};
- };
+};
ralink,group = "i2c", "rgmii2", "spi", "ephy";
ralink,function = "gpio";
};
+
uartf_gpio {
ralink,group = "uartf";
ralink,function = "gpio uartf";
#address-cells = <1>;
#size-cells = <1>;
compatible = "mtk,mt7620-nand";
+
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
+
partition@200000 {
label = "factory";
reg = <0x200000 0x40000>;
read-only;
};
+
partition@240000 {
label = "Config";
reg = <0x240000 0x400000>;
read-only;
};
+
partition@640000 {
label = "firmware";
reg = <0x640000 0x1400000>;
ethernet@10100000 {
status = "okay";
-
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &mdio_pins>;
-
ralink,port-map = "llllw";
port@4 {
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 11 1>;
linux,code = <0x198>;
};
+
zwave {
label = "zwave";
gpios = <&gpio0 12 1>;
linux,code = <0x100>;
};
+
wps {
label = "wps";
gpios = <&gpio0 14 1>;
gpio-leds {
compatible = "gpio-leds";
+
zwave {
label = "na930:blue:zwave";
gpios = <&gpio2 0 1>;
};
+
status {
label = "na930:blue:status";
gpios = <&gpio2 26 1>;
};
+
service {
label = "na930:blue:service";
gpios = <&gpio2 28 1>;
};
+
power {
label = "na930:blue:power";
gpios = <&gpio2 29 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "nbg-419n:green:power";
gpios = <&gpio0 9 1>;
};
+
wps {
label = "nbg-419n:green:wps";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
ohci@101c1000 {
status = "okay";
};
-
-/* gpio-leds {
- compatible = "gpio-leds";
- system {
- label = "mpr-a1:blue:system";
- gpios = <&gpio0 20 1>;
- };
- power {
- label = "mpr-a1:red:power";
- gpios = <&gpio0 17 1>;
- };
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
- wps {
- label = "reset";
- gpios = <&gpio0 0 1>;
- linux,code = <0x198>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb {
- gpio-export,name = "usb";
- gpio-export,output = <1>;
- gpios = <&gpio0 7 0>;
- };
- root_hub {
- gpio-export,name = "root_hub";
- gpio-export,output = <1>;
- gpios = <&gpio0 12 0>;
- };
- }; */
};
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
cpu {
label = "nw718:amber:cpu";
gpios = <&gpio0 13 1>;
};
+
usb {
label = "nw718:amber:usb";
gpios = <&gpio0 8 1>;
};
+
wps {
label = "nw718:amber:wps";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
/include/ "rt5350.dtsi"
/ {
- compatible = "RT5350F-OLINUXINO", "ralink,rt5350-soc";
- model = "RT5350F-OLINUXINO";
-
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "s25fl064k";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- gpio1: gpio@660 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- ralink,portmap = <0x2f>;
- ralink,led_polarity = <0x17>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- relay1 {
- gpio-export,name = "gpio12";
- gpio-export,output = <0>;
- gpios = <&gpio0 12 0>;
- };
-
- relay2 {
- gpio-export,name = "gpio14";
- gpio-export,output = <0>;
- gpios = <&gpio0 14 0>;
- };
-
- button {
- gpio-export,name = "button";
- gpios = <&gpio0 0 1>;
- };
-
- };
+ compatible = "RT5350F-OLINUXINO", "ralink,rt5350-soc";
+ model = "RT5350F-OLINUXINO";
+
+ palmbus@10000000 {
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "s25fl064k";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ gpio1: gpio@660 {
+ status = "okay";
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ };
+
+ esw@10110000 {
+ ralink,portmap = <0x2f>;
+ ralink,led_polarity = <0x17>;
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ relay1 {
+ gpio-export,name = "gpio12";
+ gpio-export,output = <0>;
+ gpios = <&gpio0 12 0>;
+ };
+
+ relay2 {
+ gpio-export,name = "gpio14";
+ gpio-export,output = <0>;
+ gpios = <&gpio0 14 0>;
+ };
+
+ button {
+ gpio-export,name = "button";
+ gpios = <&gpio0 0 1>;
+ };
+ };
};
/include/ "rt5350.dtsi"
/ {
- compatible = "RT5350F-OLINUXINO", "ralink,rt5350-soc";
- model = "RT5350F-OLINUXINO";
+ compatible = "RT5350F-OLINUXINO", "ralink,rt5350-soc";
+ model = "RT5350F-OLINUXINO";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "s25fl064k";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
+ palmbus@10000000 {
+ spi@b00 {
+ status = "okay";
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "s25fl064k";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- gpio1: gpio@660 {
- status = "okay";
- };
- };
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
+ gpio1: gpio@660 {
+ status = "okay";
+ };
+ };
- esw@10110000 {
- ralink,portmap = <0x2f>;
- ralink,led_polarity = <0x17>;
- };
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+ ethernet@10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ };
- ehci@101c0000 {
- status = "okay";
- };
+ esw@10110000 {
+ ralink,portmap = <0x2f>;
+ ralink,led_polarity = <0x17>;
+ };
- ohci@101c1000 {
- status = "okay";
- };
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
};
compatible = "macronix,mx25l12805d";
spi-max-frequency = <25000000>;
reg = <0>;
-
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
reset {
label = "reset";
gpios = <&gpio0 14 0>;
label = "emb:orange:power";
gpios = <&gpio0 7 1>;
};
+
status {
label = "emb:green:status";
gpios = <&gpio0 21 1>;
};
+
eth {
label = "emb:green:eth";
gpios = <&gpio0 20 1>;
};
+
eth2 {
label = "emb:red:eth";
gpios = <&gpio0 18 1>;
};
+
wifi {
label = "emb:green:wifi";
gpios = <&gpio0 17 1>;
};
+
wifi2 {
label = "emb:red:wifi";
gpios = <&gpio0 19 1>;
compatible = "gpio-export";
#size-cells = <0>;
/* gpio 12 and 13 handle the OC input */
+
usb0 {
gpio-export,name = "usb0";
gpio-export,output = <1>;
gpios = <&gpio0 2 0>;
};
+
usb1 {
gpio-export,name = "usb1";
gpio-export,output = <1>;
gpio-leds {
compatible = "gpio-leds";
+
status {
label = "emb:green:status";
gpios = <&gpio0 9 1>;
};
+
wlan {
label = "emb:green:wlan";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 12 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
/ {
compatible = "OMNI-PLUG", "ralink,rt5350-soc";
model = "Omnima MiniPlug";
-
+
pinctrl {
state_default: pinctrl0 {
gpio {
};
};
};
-
+
gpio-leds {
compatible = "gpio-leds";
+
wlan {
label = "miniplug:red:wlan";
gpios = <&gpio0 9 0>;
};
+
mobile {
label = "miniplug:green:mobile";
gpios = <&gpio0 13 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x211>;
};
+
mode-one {
label = "mode1";
gpios = <&gpio0 11 1>;
linux,code = <0x211>;
};
+
mode-two {
label = "mode2";
gpios = <&gpio0 12 1>;
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
};
};
};
-
+
ethernet@10100000 {
mtd-mac-address = <&factory 0x4>;
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
-
+
otg@101c0000 {
status = "okay";
};
compatible = "ralink,mt7620a-soc";
model = "OY-0001";
- chosen {
- bootargs = "console=ttyS0,115200";
- };
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
palmbus@10000000 {
gpio2: gpio@660 {
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
-
ralink,port-map = "llllw";
};
gpio-leds {
compatible = "gpio-leds";
+
powerled {
label = "oy:green:power";
gpios = <&gpio0 9 1>;
};
+
wifiled {
label = "oy:green:wifi";
gpios = <&gpio3 0 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
s1 {
label = "reset";
gpios = <&gpio0 1 1>;
i2c@900 {
compatible = "ralink,i2c-mt7621";
reg = <0x900 0x100>;
-
#address-cells = <1>;
#size-cells = <0>;
-
pinctrl-names = "default";
pinctrl-0 = <&i2c_pins>;
-
status = "okay";
pcf8563: rtc@51 {
status = "okay";
compatible = "nxp,pcf8563";
reg = <0x51>;
- };
- };
- };
+ };
+ };
+ };
pcie@1e140000 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 18 1>;
pinctrl {
state_default: pinctrl0 {
- gpio {
+ gpio {
ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
ralink,function = "gpio";
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
wan {
label = "psr-680w:red:wan";
gpios = <&gpio0 19 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 0 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
wifi {
label = "pwh2004:red:wifi";
gpios = <&gpio0 14 1>;
};
+
power {
label = "pwh2004:green:power";
gpios = <&gpio0 9 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
wps {
label = "wps";
gpios = <&gpio0 12 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
gpio-leds {
compatible = "gpio-leds";
+
orange {
label = "7links:orange:wifi";
gpios = <&gpio0 18 1>;
};
+
blue {
label = "7links:blue:storage";
gpios = <&gpio0 19 1>;
gpio-leds {
compatible = "gpio-leds";
+
wifi {
label = "linksys:orange:wifi";
gpios = <&gpio0 0 1>;
};
+
power {
label = "linksys:white:power";
gpios = <&gpio0 9 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
wps {
label = "wps";
gpios = <&gpio0 10 1>;
linux,code = <0x211>;
};
+
reset {
label = "reset";
gpios = <&gpio0 11 0>;
i2s@a00 {
status = "okay";
-
pinctrl-names = "default";
pinctrl-0 = <&pcm_i2s_pins>;
};
gsw@10110000 {
ralink,port4 = "ephy";
-
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
};
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
touch {
label = "touch";
gpios = <&gpio1 0 1>;
linux,code = <0x100>;
};
+
wps {
label = "wps";
gpios = <&gpio1 1 1>;
linux,code = <0x100>;
};
+
reset {
label = "reset";
gpios = <&gpio1 2 1>;
linux,code = <0x100>;
};
+
audio {
label = "audio";
gpios = <&gpio1 3 0>;
gpio-leds {
compatible = "gpio-leds";
+
backlight {
label = "asus:white:back";
gpios = <&gpio1 4 1>;
};
+
wifi0 {
label = "asus:blue:5g3";
gpios = <&gpio1 5 1>;
};
+
wifi1 {
label = "asus:blue:5g2";
gpios = <&gpio1 6 1>;
};
+
wifi2 {
label = "asus:blue:5g1";
gpios = <&gpio1 7 1>;
};
+
wifi3 {
label = "asus:blue:wifi";
gpios = <&gpio1 8 1>;
};
+
wifi4 {
label = "asus:blue:2g1";
gpios = <&gpio1 9 1>;
};
+
wifi5 {
label = "asus:blue:2g2";
gpios = <&gpio1 10 1>;
};
+
wifi6 {
label = "asus:blue:2g3";
gpios = <&gpio1 11 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
wps {
label = "asus:green:wps";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "rt-n13u:power";
gpios = <&gpio0 7 1>;
};
+
wifi {
label = "rt-n13u:wifi";
gpios = <&gpio0 8 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <10>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
gpio-leds {
compatible = "gpio-leds";
+
wan {
label = "asus:blue:wan";
gpios = <&gpio2 0 1>;
};
+
lan {
label = "asus:blue:lan";
gpios = <&gpio2 1 1>;
};
+
usb {
label = "asus:blue:usb";
gpios = <&gpio2 2 1>;
};
+
power {
label = "asus:blue:power";
gpios = <&gpio2 3 1>;
};
+
air {
label = "asus:blue:air";
gpios = <&gpio3 0 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 2 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
reg = <0x0 0x30000>;
read-only;
};
+
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
+
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
+
partition@50000 {
label = "firmware";
reg = <0x50000 0x3b0000>;
status = "okay";
mtd-mac-address = <&factory 0x4>;
- port@0 {
+ port@0 {
ralink,fixed-link = <1000 1 1 1>;
};
mdio-bus {
status = "okay";
+
phy0: ethernet-phy@0 {
phy-mode = "mii";
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
wps {
label = "wps";
gpios = <&gpio0 0 0>;
linux,code = <0x211>;
};
+
reset {
label = "reset";
gpios = <&gpio0 12 0>;
};
ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
+ mtd-mac-address = <&factory 0x4>;
+
port@0 {
ralink,fixed-link = <1000 1 1 1>;
};
pci@10140000 {
status = "okay";
-
pinctrl-names = "default";
pinctrl-0 = <&pci_pins>;
+
pci_pins: pci {
pci {
ralink,group = "pci";
host-bridge {
pci-bridge@1 {
status = "okay";
- wmac@0,0 {
- compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
- reg = < 0x10000 0 0 0 0 >;
- ralink,eeprom = "rt2x00pci_1_0.eeprom";
- };
+ wmac@0,0 {
+ compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
+ reg = < 0x10000 0 0 0 0 >;
+ ralink,eeprom = "rt2x00pci_1_0.eeprom";
+ };
};
};
};
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
-
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
reset {
label = "reset";
gpios = <&gpio0 13 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio1 2 1>;
label = "asus:blue:power";
gpios = <&gpio0 0 1>;
};
+
lan {
label = "asus:blue:lan";
gpios = <&gpio0 19 1>;
};
+
wan {
label = "asus:blue:wan";
gpios = <&gpio1 3 1>;
};
+
usb {
label = "asus:blue:usb";
gpios = <&gpio1 0 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
+ ethernet@10100000 {
+ mtd-mac-address = <&factory 0x28>;
+ };
esw@10110000 {
ralink,portmap = <0x3e>;
gpio-leds {
compatible = "gpio-leds";
+
status {
label = "rut5xx:green:status";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 16 1>;
linux,code = <0x198>;
};
+
rfkill {
label = "rfkill";
gpios = <&gpio0 14 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
wifi {
label = "sl-r7205:green:wifi";
gpios = <&gpio0 7 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
ethernet@10100000 {
mtd-mac-address = <&factory 0x28>;
+
port@0 {
phy-handle = <&phy0>;
phy-mode = "rgmii";
};
+
mdio-bus {
status = "okay";
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
-
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio1 2 1>;
linux,code = <0x211>;
};
+
rfkill {
label = "rfkill";
gpios = <&gpio0 0 1>;
gpio-leds {
compatible = "gpio-leds";
+
wps {
label = "trendnet:green:wps";
gpios = <&gpio0 9 1>;
ethernet@10100000 {
status = "okay";
mtd-mac-address = <&factory 0x28>;
+
port@0 {
phy-handle = <&phy0>;
phy-mode = "rgmii";
};
+
mdio-bus {
status = "okay";
pci@10140000 {
status = "okay";
-
pinctrl-names = "default";
pinctrl-0 = <&pci_pins>;
+
pci_pins: pci {
pci {
ralink,group = "pci";
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
-
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio1 2 1>;
gpio-leds {
compatible = "gpio-leds";
+
wps {
label = "trendnet:orange:wps";
gpios = <&gpio0 9 1>;
};
+
wps2 {
label = "trendnet:green:wps";
gpios = <&gpio1 4 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
3g {
label = "ur326:green:3g";
gpios = <&gpio0 9 1>;
};
+
gateway {
label = "ur326:green:gateway";
gpios = <&gpio0 11 1>;
};
+
ap {
label = "ur326:green:ap";
gpios = <&gpio0 12 1>;
};
+
wps {
label = "ur326:green:wps";
gpios = <&gpio0 14 1>;
};
+
station {
label = "ur326:green:station";
gpios = <&gpio0 13 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset_wps {
label = "reset_wps";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
mode {
label = "mode";
gpios = <&gpio0 7 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
*/
gpio-leds {
compatible = "gpio-leds";
+
3g {
label = "ur336:green:3g";
gpios = <&gpio0 9 1>;
};
+
gateway {
label = "ur336:green:gateway";
gpios = <&gpio0 11 1>;
};
+
ap {
label = "ur336:green:ap";
gpios = <&gpio0 12 1>;
};
+
wps {
label = "ur336:green:wps";
gpios = <&gpio0 14 1>;
};
+
station {
label = "ur336:green:station";
gpios = <&gpio0 13 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset_wps {
label = "reset_wps";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
mode {
label = "mode";
gpios = <&gpio0 7 1>;
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
-
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
wps {
label = "wps";
gpios = <&gpio0 0 0>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
security {
label = "v22rw-2x2:green:security";
gpios = <&gpio0 13 1>;
};
+
wps {
label = "v22rw-2x2:red:wps";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
gpio-export,direction_may_change = <1>;
gpios = <&gpio0 7 0>;
};
+
gpio8 {
/* UARTF_TXD */
gpio-export,name = "gpio8";
gpio-export,direction_may_change = <1>;
gpios = <&gpio0 8 0>;
};
+
gpio9 {
/* UARTF_CTS_N */
gpio-export,name = "gpio9";
gpio-export,direction_may_change = <1>;
gpios = <&gpio0 9 0>;
};
+
gpio12 {
/* UARTF_DCD_N */
gpio-export,name = "gpio12";
gpio-export,direction_may_change = <1>;
gpios = <&gpio0 12 0>;
};
+
gpio13 {
/* UARTF_DSR_N */
gpio-export,name = "gpio13";
gpio-export,direction_may_change = <1>;
gpios = <&gpio0 13 0>;
};
+
gpio14 {
/* UARTF_RIN */
gpio-export,name = "gpio14";
gpio-export,direction_may_change = <1>;
gpios = <&gpio0 17 0>;
};
+
gpio18 {
/* JTAG_TDI */
gpio-export,name = "gpio18";
gpio-export,direction_may_change = <1>;
gpios = <&gpio0 18 0>;
};
+
gpio19 {
/* JTAG_TMS */
gpio-export,name = "gpio19";
gpio-export,direction_may_change = <1>;
gpios = <&gpio0 19 0>;
};
+
gpio20 {
/* JTAG_TCLK */
gpio-export,name = "gpio20";
gpio-export,direction_may_change = <1>;
gpios = <&gpio0 20 0>;
};
+
gpio21 {
/* JTAG_TRST_N */
gpio-export,name = "gpio21";
gpio-export,direction_may_change = <1>;
gpios = <&gpio1 0 0>;
};
+
gpio23 {
/* ETH1_LED */
gpio-export,name = "gpio23";
gpio-export,direction_may_change = <1>;
gpios = <&gpio1 1 0>;
};
+
gpio24 {
/* ETH2_LED */
gpio-export,name = "gpio24";
gpio-export,direction_may_change = <1>;
gpios = <&gpio1 2 0>;
};
+
gpio25 {
/* ETH3_LED */
gpio-export,name = "gpio25";
gpio-export,direction_may_change = <1>;
gpios = <&gpio1 3 0>;
};
+
gpio26 {
/* ETH4_LED */
gpio-export,name = "gpio26";
gpio-leds {
compatible = "gpio-leds";
+
status {
/* UARTF_RXD */
label = "vocore:green:status";
gpios = <&gpio0 10 0>;
};
+
eth {
/* UARTF_DTR_N */
label = "vocore:orange:eth";
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
3grouter {
label = "tenda:blue:3grouter";
gpios = <&gpio0 11 1>;
};
+
ap {
label = "tenda:blue:ap";
gpios = <&gpio0 12 1>;
};
+
wisprouter {
label = "tenda:blue:wisprouter";
gpios = <&gpio0 9 1>;
};
+
wirelessrouter {
label = "tenda:blue:wirelessrouter";
gpios = <&gpio0 13 1>;
};
+
3g {
label = "tenda:blue:3g";
gpios = <&gpio0 7 1>;
};
+
wpsreset {
label = "tenda:blue:wpsreset";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 0 1>;
linux,code = <0x198>;
};
+
mode {
label = "mode";
gpios = <&gpio0 10 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
sys {
label = "w306r-v20:green:sys";
gpios = <&gpio0 9 1>;
};
+
wps {
label = "w306r-v20:green:wps";
gpios = <&gpio0 13 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "RESET/WPS";
gpios = <&gpio0 10 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
usb {
label = "alfa:blue:usb";
gpios = <&gpio0 13 1>;
};
+
wps {
label = "alfa:blue:wps";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
user {
label = "wcr150gn:amber:user";
gpios = <&gpio0 12 1>;
};
+
power {
label = "wcr150gn:amber:power";
gpios = <&gpio0 8 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
wps {
label = "wps";
gpios = <&gpio0 10 1>;
linux,code = <0x211>;
};
+
reset {
label = "reset";
gpios = <&gpio0 0 1>;
};
};
};
-
+
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "buffalo:red:power";
gpios = <&gpio0 7 1>;
};
+
wifi {
label = "buffalo:green:wifi";
gpios = <&gpio0 8 1>;
};
+
power2 {
label = "buffalo:green:power";
gpios = <&gpio0 9 1>;
};
+
wifi2 {
label = "buffalo:orange:wifi";
gpios = <&gpio0 10 1>;
};
+
internet {
label = "buffalo:green:internet";
gpios = <&gpio2 17 1>;
};
+
router {
label = "buffalo:orange:router";
gpios = <&gpio2 18 1>;
};
+
router2 {
label = "buffalo:green:router";
gpios = <&gpio2 19 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio2 12 1>;
linux,code = <0x198>;
};
+
aoss {
label = "aoss";
gpios = <&gpio2 13 1>;
linux,code = <0x211>;
};
+
ap {
label = "ap";
gpios = <&gpio2 14 1>;
linux,code = <0x100>;
linux,input-type = <5>; /* EV_SW */
};
+
bridge {
label = "bridge";
gpios = <&gpio2 15 1>;
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
ralink,function = "gpio";
};
+
pa {
ralink,group = "pa";
ralink,function = "pa";
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
-
ralink,port-map = "llllw";
};
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "buffalo:red:power";
gpios = <&gpio0 7 1>;
};
+
wifi {
label = "buffalo:green:wifi";
gpios = <&gpio0 8 1>;
};
+
power2 {
label = "buffalo:green:power";
gpios = <&gpio0 9 1>;
};
+
wifi2 {
label = "buffalo:orange:wifi";
gpios = <&gpio0 10 1>;
};
+
internet {
label = "buffalo:green:internet";
gpios = <&gpio2 17 1>;
};
+
router {
label = "buffalo:green:router";
gpios = <&gpio2 18 1>;
};
+
router2 {
label = "buffalo:orange:router";
gpios = <&gpio2 19 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio2 12 1>;
linux,code = <0x198>;
};
+
aoss {
label = "aoss";
gpios = <&gpio2 13 1>;
linux,code = <0x211>;
};
+
ap {
label = "ap";
gpios = <&gpio2 14 1>;
linux,code = <0x100>;
linux,input-type = <5>; /* EV_SW */
};
+
bridge {
label = "bridge";
gpios = <&gpio2 15 1>;
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
-
mtd-mac-address = <&factory 0x4>;
ralink,port-map = "llllw";
};
pcie@10140000 {
status = "okay";
};
-
+
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "buffalo:red:power";
gpios = <&gpio0 7 1>;
};
+
wifi {
label = "buffalo:green:wifi";
gpios = <&gpio0 8 1>;
};
+
power2 {
label = "buffalo:green:power";
gpios = <&gpio0 9 1>;
};
+
wifi2 {
label = "buffalo:orange:wifi";
gpios = <&gpio0 10 1>;
};
+
internet {
label = "buffalo:green:internet";
gpios = <&gpio2 17 1>;
};
+
router {
label = "buffalo:green:router";
gpios = <&gpio2 18 1>;
};
+
router2 {
label = "buffalo:orange:router";
gpios = <&gpio2 19 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio2 12 1>;
linux,code = <0x198>;
};
+
aoss {
label = "aoss";
gpios = <&gpio2 13 1>;
linux,code = <0x211>;
};
+
ap {
label = "ap";
gpios = <&gpio2 14 1>;
linux,code = <0x100>;
linux,input-type = <5>; /* EV_SW */
};
+
bridge {
label = "bridge";
gpios = <&gpio2 15 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
*/
gpio-leds {
compatible = "gpio-leds";
+
diag {
label = "whr-g300n:red:diag";
gpios = <&gpio0 7 1>;
};
+
router {
label = "whr-g300n:green:router";
gpios = <&gpio0 9 1>;
};
+
security {
label = "whr-g300n:amber:security";
gpios = <&gpio0 14 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
aoss {
label = "aoss";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
+
router-off {
label = "router-off";
gpios = <&gpio0 11 1>;
linux,code = <0x102>;
};
+
router-on {
label = "router-on";
gpios = <&gpio0 8 1>;
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "wl-351:amber:power";
gpios = <&gpio0 8 1>;
};
+
unpopulated {
label = "wl-351:amber:unpopulated";
gpios = <&gpio0 12 1>;
};
+
unpopulated2 {
label = "wl-351:blue:unpopulated";
gpios = <&gpio0 13 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
first {
label = "wl341v3:amber:first";
gpios = <&gpio0 9 1>;
};
+
first2 {
label = "wl341v3:blue:first";
gpios = <&gpio0 13 1>;
};
+
third {
label = "wl341v3:amber:third";
gpios = <&gpio0 11 1>;
};
+
third2 {
label = "wl341v3:blue:third";
gpios = <&gpio0 14 1>;
};
+
fourth {
label = "wl341v3:blue:fourth";
gpios = <&gpio0 10 1>;
};
+
fifth {
label = "wl341v3:amber:fifth";
gpios = <&gpio0 12 1>;
};
+
fifth2 {
label = "wl341v3:blue:fifth";
gpios = <&gpio0 8 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 7 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 5 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
reg = <0x0 0x30000>;
read-only;
};
+
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
+
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
+
partition@50000 {
label = "linux";
reg = <0x50000 0x3b0000>;
status = "okay";
mtd-mac-address = <&factory 0x4>;
- port@0 {
+ port@0 {
ralink,fixed-link = <1000 1 1 1>;
};
};
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
+
bandwidth {
label = "bandwidth";
gpios = <&gpio0 8 0>;
linux,code = <0x198>;
};
+
reset {
label = "reset";
gpios = <&gpio0 9 1>;
label = "buffalo:red:diag";
gpios = <&gpio0 10 1>;
};
+
power {
label = "buffalo:blue:power";
gpios = <&gpio0 12 1>;
};
+
security {
label = "buffalo:blue:security";
gpios = <&gpio0 13 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
link {
label = "asus:blue:link";
gpios = <&gpio0 9 1>;
};
+
power {
label = "asus:blue:power";
gpios = <&gpio0 11 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
3g {
label = "asus:blue:3g";
gpios = <&gpio0 9 1>;
};
+
3g2 {
label = "asus:red:3g";
gpios = <&gpio0 13 1>;
};
+
power {
label = "asus:blue:power";
gpios = <&gpio0 11 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
gpio-leds {
compatible = "gpio-leds";
+
aoss1 {
label = "buffalo:red:aoss";
gpios = <&gpio2 1 1>;
};
+
aoss2 {
label = "buffalo:green:aoss";
gpios = <&gpio2 2 1>;
};
+
power {
label = "buffalo:green:status";
gpios = <&gpio2 4 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
+
aoss {
label = "aoss";
gpios = <&gpio0 2 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
power-green {
label = "netgear:green:power";
gpios = <&gpio0 8 1>;
};
+
power-red {
label = "netgear:red:power";
gpios = <&gpio0 9 1>;
};
+
wlan-green {
label = "netgear:green:wlan";
gpios = <&gpio0 12 0>;
};
+
wlan-red {
label = "netgear:red:wlan";
gpios = <&gpio0 13 0>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
+
rt {
label = "rt";
gpios = <&gpio0 11 1>;
linux,code = <0x100>;
};
+
ap {
label = "ap";
gpios = <&gpio0 7 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
3g {
label = "wr512:green:3g";
gpios = <&gpio0 9 1>;
};
+
gateway {
label = "wr512:green:gateway";
gpios = <&gpio0 11 1>;
};
+
ap {
label = "wr512:green:ap";
gpios = <&gpio0 12 1>;
};
+
wps {
label = "wr512:green:wps";
gpios = <&gpio0 14 1>;
};
+
station {
label = "wr512:green:station";
gpios = <&gpio0 13 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset_wps {
label = "reset_wps";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
mode {
label = "mode";
gpios = <&gpio0 7 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
3g {
label = "wr512:green:3g";
gpios = <&gpio0 9 1>;
};
+
gateway {
label = "wr512:green:gateway";
gpios = <&gpio0 11 1>;
};
+
ap {
label = "wr512:green:ap";
gpios = <&gpio0 12 1>;
};
+
wps {
label = "wr512:green:wps";
gpios = <&gpio0 14 1>;
};
+
station {
label = "wr512:green:station";
gpios = <&gpio0 13 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset_wps {
label = "reset_wps";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
mode {
label = "mode";
gpios = <&gpio0 7 1>;
gpio-leds {
compatible = "gpio-leds";
+
wps {
label = "wr6202:blue:wps";
gpios = <&gpio0 14 1>;
};
+
3g {
label = "wr6202:blue:3g";
gpios = <&gpio0 13 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio1: gpio@638 {
status = "okay";
};
+
gpio3: gpio@688 {
status = "okay";
};
ralink,group = "ephy";
ralink,function = "ephy";
};
+
default {
ralink,group = "i2c", "uartf", "spi refclk", "wled";
ralink,function = "gpio";
gpio-leds {
compatible = "gpio-leds";
+
sys {
label = "wr8305rt:sys";
gpios = <&gpio1 14 1>;
};
+
lan {
label = "wr8305rt:usb";
gpios = <&gpio1 15 1>;
};
+
wifi {
label = "wr8305rt:wifi";
gpios = <&gpio3 0 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 1 1>;
};
};
};
-
gpio-leds {
compatible = "gpio-leds";
+
indicator {
label = "wrtnode:blue:indicator";
gpios = <&gpio1 14 1>;
gpio-leds {
compatible = "gpio-leds";
+
internet_g {
label = "buffalo:green:internet";
gpios = <&gpio1 9 1>;
};
+
router_g {
label = "buffalo:green:router";
gpios = <&gpio1 10 1>;
};
+
router_o {
label = "buffalo:orange:router";
gpios = <&gpio1 11 1>;
};
+
internet_o {
label = "buffalo:orange:internet";
gpios = <&gpio1 12 1>;
};
+
wifi_o {
label = "buffalo:orange:wifi";
gpios = <&gpio1 13 1>;
};
+
power {
label = "buffalo:green:power";
gpios = <&gpio1 14 1>;
};
+
diag {
label = "buffalo:orange:diag";
gpios = <&gpio1 15 1>;
};
+
wifi_g {
label = "buffalo:green:wifi";
gpios = <&gpio1 16 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
power {
label = "power";
gpios = <&gpio0 18 1>;
linux,code = <0x74>;
};
+
reset {
label = "reset";
gpios = <&gpio0 3 1>;
linux,code = <0x198>;
};
+
aoss {
label = "aoss";
gpios = <&gpio0 6 1>;
linux,code = <0x211>;
};
+
auto {
label = "mode";
gpios = <&gpio0 7 0>;
linux,code = <0x100>;
linux,input-type = <5>; /* EV_SW */
};
+
ap {
label = "ap";
gpios = <&gpio0 10 0>;
linux,code = <0x100>;
linux,input-type = <5>; /* EV_SW */
};
+
router {
label = "router";
gpios = <&gpio0 12 0>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "buffalo:green:power";
gpios = <&gpio0 12 1>;
};
+
wifi_o {
label = "buffalo:orange:wifi";
gpios = <&gpio1 9 1>;
};
+
diag {
label = "buffalo:orange:diag";
gpios = <&gpio1 10 1>;
};
+
wifi_g {
label = "buffalo:green:wifi";
gpios = <&gpio1 12 1>;
};
+
router_o {
label = "buffalo:orange:router";
gpios = <&gpio1 13 1>;
};
+
router_g {
label = "buffalo:green:router";
gpios = <&gpio1 14 1>;
};
+
internet_o {
label = "buffalo:orange:internet";
gpios = <&gpio1 15 1>;
};
+
internet_g {
label = "buffalo:green:internet";
gpios = <&gpio1 16 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
power {
label = "power";
gpios = <&gpio0 8 1>;
linux,code = <0x74>;
};
+
reset {
label = "reset";
gpios = <&gpio0 11 1>;
linux,code = <0x198>;
};
+
aoss {
label = "aoss";
gpios = <&gpio0 18 1>;
linux,code = <0x211>;
};
+
auto {
label = "mode";
gpios = <&gpio0 7 0>;
linux,code = <0x100>;
linux,input-type = <5>; /* EV_SW */
};
+
ap {
label = "ap";
gpios = <&gpio0 6 0>;
linux,code = <0x100>;
linux,input-type = <5>; /* EV_SW */
};
+
router {
label = "router";
gpios = <&gpio0 10 0>;
linux,input-type = <5>; /* EV_SW */
};
};
+
gpio_poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio1 11 1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
model = "Nexx WT3020";
palmbus@10000000 {
- gpio2: gpio@660 {
- status = "okay";
- };
+ gpio2: gpio@660 {
+ status = "okay";
+ };
- gpio3: gpio@688 {
- status = "okay";
- };
+ gpio3: gpio@688 {
+ status = "okay";
+ };
spi@b00 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 1 1>;
};
};
- gpio-leds {
- compatible = "gpio-leds";
- power {
- label = "nexx:blue:power";
- gpios = <&gpio3 0 0>;
- };
- };
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "nexx:blue:power";
+ gpios = <&gpio3 0 0>;
+ };
+ };
};
model = "Nexx WT3020";
palmbus@10000000 {
- gpio2: gpio@660 {
- status = "okay";
- };
+ gpio2: gpio@660 {
+ status = "okay";
+ };
- gpio3: gpio@688 {
- status = "okay";
- };
+ gpio3: gpio@688 {
+ status = "okay";
+ };
spi@b00 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 1 1>;
};
};
- gpio-leds {
- compatible = "gpio-leds";
- power {
- label = "nexx:blue:power";
- gpios = <&gpio3 0 0>;
- };
- };
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "nexx:blue:power";
+ gpios = <&gpio3 0 0>;
+ };
+ };
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
reg = <0x0 0x30000>;
read-only;
};
+
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
+
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
+
partition@50000 {
label = "firmware";
reg = <0x50000 0x3b0000>;
status = "okay";
mtd-mac-address = <&factory 0x4>;
- port@0 {
+ port@0 {
ralink,fixed-link = <1000 1 1 1>;
};
mdio-bus {
status = "okay";
+
phy0: ethernet-phy@0 {
phy-mode = "mii";
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
+
router {
label = "router_switch";
gpios = <&gpio0 7 0>;
linux,code = <0x100>;
};
+
reset {
label = "reset";
gpios = <&gpio0 9 1>;
label = "buffalo:green:router";
gpios = <&gpio0 8 1>;
};
+
diag {
label = "buffalo:red:diag";
gpios = <&gpio0 12 1>;
};
+
security_g {
label = "buffalo:orange:security_g";
gpios = <&gpio0 11 1>;
};
+
security_n {
label = "buffalo:orange:security_n";
gpios = <&gpio0 13 1>;
reg = <0x00440000 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
-
status = "ok";
};
};
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "x5:green:power";
gpios = <&gpio0 13 1>;
};
+
20 {
label = "x5:green:20";
gpios = <&gpio0 12 1>;
};
+
50 {
label = "x5:green:50";
gpios = <&gpio0 11 1>;
};
+
80 {
label = "x5:green:80";
gpios = <&gpio0 7 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
bat {
label = "bat";
gpios = <&gpio0 9 1>;
linux,code = <0x211>;
};
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
+
mode {
label = "mode";
gpios = <&gpio0 14 1>;
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
+
usb-mode {
gpio-export,name = "usb-mode";
gpio-export,output = <0>;
palmbus@10000000 {
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "x8:green:power";
gpios = <&gpio0 13 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
gpio-leds {
compatible = "gpio-leds";
+
wifi {
label = "xdxrn502j:green:wifi";
gpios = <&gpio0 7 1>;
};
+
power {
label = "xdxrn502j:green:power";
gpios = <&gpio0 9 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 10 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio1 6 0>;
mtd-mac-address = <&factory 0x4>;
ralink,port-map = "llllw";
};
-
+
gpio-leds {
compatible = "gpio-leds";
+
power1 {
label = "lenovo:blue:power";
gpios = <&gpio0 9 1>;
};
+
wlan1 {
label = "lenovo:blue:wifi";
gpios = <&gpio3 0 1>;
};
+
wlan2 {
label = "lenovo:blue:wifi5g";
gpios = <&gpio2 10 1>;
};
+
usb {
label = "lenovo:blue:usb";
gpios = <&gpio2 12 1>;
};
+
lan {
label = "lenovo:blue:lan";
gpios = <&gpio2 15 1>;
};
+
internet {
label = "lenovo:blue:internet";
gpios = <&gpio2 11 1>;
ralink,group = "uartf", "wled", "nd_sd";
ralink,function = "gpio";
};
+
pa {
ralink,group = "pa";
ralink,function = "pa";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 11 1>;
mtd-mac-address = <&factory 0x4>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
ralink,port-map = "wllll";
port@4 {
gpio-leds {
compatible = "gpio-leds";
+
power1 {
label = "lenovo:yellow:power";
gpios = <&gpio0 14 1>;
};
+
power2 {
label = "lenovo:blue:power";
gpios = <&gpio0 9 1>;
};
+
wlan1 {
label = "lenovo:yellow:wifi";
gpios = <&gpio3 0 1>;
};
+
wlan2 {
label = "lenovo:blue:wifi";
gpios = <&gpio2 10 1>;
};
+
usb1 {
label = "lenovo:yellow:usb";
gpios = <&gpio2 13 1>;
};
+
usb2 {
label = "lenovo:blue:usb";
gpios = <&gpio2 12 1>;
};
+
internet {
label = "lenovo:blue:internet";
gpios = <&gpio2 11 1>;
gpio-leds {
compatible = "gpio-leds";
+
power {
label = "zbtlink:blue:power";
gpios = <&gpio1 14 1>;
};
+
usb {
label = "zbtlink:blue:usb";
gpios = <&gpio1 15 0>;
};
+
air {
label = "zbtlink:blue:air";
gpios = <&gpio3 0 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio0 1 1>;
model = "ZTE Q7";
palmbus@10000000 {
-
gpio0: gpio@600 {
status = "okay";
};
gpio-leds {
compatible = "gpio-leds";
+
statred {
label = "zte:red:status";
gpios = <&gpio0 13 1>;
};
+
statblue {
label = "zte:blue:status";
gpios = <&gpio0 9 1>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio1 2 1>;
palmbus@10000000 {
compatible = "palmbus";
reg = <0x10000000 0x200000>;
- ranges = <0x0 0x10000000 0x1FFFFF>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "ralink,rt2880-pinmux";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
+
state_default: pinctrl0 {
};
+
pcm_i2s_pins: pcm_i2s {
pcm_i2s {
ralink,group = "uartf";
ralink,function = "pcm i2s";
};
};
+
uartf_gpio_pins: uartf_gpio {
uartf_gpio {
ralink,group = "uartf";
ralink,function = "gpio uartf";
};
};
+
spi_pins: spi {
spi {
ralink,group = "spi";
ralink,function = "spi";
};
};
+
i2c_pins: i2c {
i2c {
ralink,group = "i2c";
ralink,function = "i2c";
};
};
+
uartlite_pins: uartlite {
uart {
ralink,group = "uartlite";
ralink,function = "uartlite";
};
};
+
mdio_pins: mdio {
mdio {
ralink,group = "mdio";
ralink,function = "mdio";
};
};
+
ephy_pins: ephy {
ephy {
ralink,group = "ephy";
ralink,function = "ephy";
};
};
+
wled_pins: wled {
wled {
ralink,group = "wled";
ralink,function = "wled";
};
};
+
rgmii1_pins: rgmii1 {
rgmii1 {
ralink,group = "rgmii1";
ralink,function = "rgmii1";
};
};
+
rgmii2_pins: rgmii2 {
rgmii2 {
ralink,group = "rgmii2";
ralink,function = "rgmii2";
};
};
+
pcie_pins: pcie {
pcie {
ralink,group = "pcie";
palmbus@10000000 {
compatible = "palmbus";
reg = <0x10000000 0x200000>;
- ranges = <0x0 0x10000000 0x1FFFFF>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "ralink,rt2880-pinmux";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
+
state_default: pinctrl0 {
};
+
spi_pins: spi {
spi {
ralink,group = "spi";
ralink,function = "spi";
};
};
+
uartlite_pins: uartlite {
uart {
ralink,group = "uartlite";
palmbus@1E000000 {
compatible = "palmbus";
reg = <0x1E000000 0x100000>;
- ranges = <0x0 0x1E000000 0x0FFFFF>;
+ ranges = <0x0 0x1E000000 0x0FFFFF>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "ralink,rt2880-pinmux";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
+
state_default: pinctrl0 {
};
+
spi_pins: spi {
spi {
ralink,group = "spi";
ralink,function = "spi";
};
};
+
i2c_pins: i2c {
i2c {
ralink,group = "i2c";
ralink,function = "i2c";
};
};
+
uart1_pins: uart1 {
uart1 {
ralink,group = "uart1";
ralink,function = "uart";
};
};
+
uart2_pins: uart2 {
uart2 {
ralink,group = "uart2";
ralink,function = "uart";
};
};
+
uart3_pins: uart3 {
uart3 {
ralink,group = "uart3";
ralink,function = "uart";
};
};
+
rgmii1_pins: rgmii1 {
rgmii1 {
ralink,group = "rgmii1";
ralink,function = "rgmii";
};
};
+
rgmii2_pins: rgmii2 {
rgmii2 {
ralink,group = "rgmii2";
ralink,function = "rgmii";
};
};
+
mdio_pins: mdio {
mdio {
ralink,group = "mdio";
ralink,function = "mdio";
};
};
+
pcie_pins: pcie {
pcie {
ralink,group = "pcie";
ralink,function = "pcie rst";
};
};
+
nand_pins: nand {
spi-nand {
ralink,group = "spi";
ralink,function = "nand";
};
+
sdhci-nand {
ralink,group = "sdhci";
ralink,function = "nand";
};
};
+
sdhci_pins: sdhci {
sdhci {
ralink,group = "sdhci";
label = "uboot";
reg = <0x00000 0x80000>; /* 64 KB */
};
+
partition@80000 {
label = "uboot_env";
reg = <0x80000 0x80000>; /* 64 KB */
};
+
partition@100000 {
label = "factory";
reg = <0x100000 0x40000>;
};
+
partition@140000 {
label = "rootfs";
reg = <0x140000 0xec0000>;
compatible = "ralink,mt7620a-gsw";
reg = <0x1e110000 8000>;
interrupt-parent = <&gic>;
- interrupts = <23>;
+ interrupts = <23>;
};
pcie@1e140000 {
palmbus@10000000 {
compatible = "palmbus";
reg = <0x10000000 0x200000>;
- ranges = <0x0 0x10000000 0x1FFFFF>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "ralink,rt2880-pinmux";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
+
state_default: pinctrl0 {
};
+
spi_pins: spi {
spi {
ralink,group = "spi";
ralink,function = "spi";
};
};
+
uart0_pins: uartlite {
uartlite {
ralink,group = "uart0";
ralink,function = "uart0";
};
};
+
uart1_pins: uart1 {
uart1 {
ralink,group = "uart1";
ralink,function = "uart1";
};
};
+
uart2_pins: uart2 {
uart2 {
ralink,group = "uart2";
ralink,function = "uart2";
};
};
+
sdxc_pins: sdxc {
sdxc {
ralink,group = "sdmode";
device_type = "pci";
};
};
-
};
palmbus@300000 {
compatible = "palmbus";
reg = <0x300000 0x200000>;
- ranges = <0x0 0x300000 0x1FFFFF>;
+ ranges = <0x0 0x300000 0x1FFFFF>;
#address-cells = <1>;
#size-cells = <1>;
ralink,eeprom = "soc_wmac.eeprom";
};
-
};
pinctrl-names = "default";
pinctrl-0 = <&uartlite_pins>;
};
-
};
pinctrl {
ralink,function = "spi";
};
};
+
uartlite_pins: uartlite {
uart {
ralink,group = "uartlite";
ralink,function = "spi";
};
};
+
uartlite_pins: uartlite {
uart {
ralink,group = "uartlite";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
+
state_default: pinctrl0 {
};
ralink,function = "spi";
};
};
+
i2c_pins: i2c {
i2c {
ralink,group = "i2c";
ralink,function = "i2c";
};
};
+
phy_led_pins: phy_led {
phy_led {
ralink,group = "led";
ralink,function = "led";
};
};
+
uartlite_pins: uartlite {
uart {
ralink,group = "uartlite";
ralink,function = "uartlite";
};
};
+
uartf_pins: uartf {
uartf {
ralink,group = "uartf";
ralink,function = "uartf";
};
};
+
spi_cs1: spi1 {
spi1 {
ralink,group = "spi_cs1";
projects / openwrt / staging / lynxis.git / commitdiff