this patch is based on ...
-> https://forum.openwrt.org/viewtopic.php?pid=179902#p179902
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37703
db120)
status_led="db120:green:status"
;;
+ dir-505-a1 |\
dir-600-a1 |\
dir-615-e4)
status_led="d-link:green:power"
ucidef_set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02"
;;
+dir-505-a1)
+ ucidef_set_led_netdev "lan" "LAN" "d-link:green:power" "eth1"
+ ;;
+
dir-600-a1|\
dir-615-e4)
ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth1"
ucidef_set_interface_lan "eth0"
;;
+dir-505-a1)
+ ucidef_set_interface_lan "eth1"
+ ;;
+
alfa-ap96 |\
alfa-nx |\
ap83 |\
*"DB120 reference board")
name="db120"
;;
+ *"DIR-505 rev. A1")
+ name="dir-505-a1"
+ ;;
*"DIR-600 rev. A1")
name="dir-600-a1"
;;
*TL-WR2543N*)
name="tl-wr2543n"
;;
+ *DIR-505-A1)
+ name="dir-505-a1"
+ ;;
*"DIR-615 rev. C1")
name="dir-615-c1"
;;
ap81 | \
ap83 | \
ap132 | \
+ dir-505-a1 | \
dir-600-a1 | \
dir-615-c1 | \
dir-615-e4 | \
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
CONFIG_ATH79_MACH_DB120=y
+CONFIG_ATH79_MACH_DIR_505_A1=y
CONFIG_ATH79_MACH_DIR_600_A1=y
CONFIG_ATH79_MACH_DIR_615_C1=y
CONFIG_ATH79_MACH_DIR_825_B1=y
--- /dev/null
+/*
+ * DLink DIR-505 A1 board support
+ *
+ * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define DIR_505A1_GPIO_BTN_WPS 11 /* verify */
+#define DIR_505A1_GPIO_BTN_RESET 12 /* verify */
+
+#define DIR_505A1_GPIO_LED_RED 26 /* unused, fyi */
+#define DIR_505A1_GPIO_LED_GREEN 27
+
+#define DIR_505A1_GPIO_WAN_LED_ENABLE 1
+
+#define DIR_505A1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DIR_505A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_505A1_KEYS_POLL_INTERVAL)
+
+#define DIR_505A1_ART_ADDRESS 0x1f010000
+#define DIR_505A1_CALDATA_OFFSET 0x1000
+#define DIR_505A1_LAN_MAC_ADDRESS 0x1f020004
+#define DIR_505A1_WAN_MAC_ADDRESS 0x1f020016
+
+static struct gpio_led dir_505_a1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:green:power",
+ .gpio = DIR_505A1_GPIO_LED_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:red:status",
+ .gpio = DIR_505A1_GPIO_LED_RED,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button dir_505_a1_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR_505A1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_505A1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR_505A1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_505A1_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init dir_505_a1_read_ascii_mac(u8 *dest, unsigned int src_addr)
+{
+ int ret;
+ u8 *src = (u8 *)KSEG1ADDR(src_addr);
+
+ ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ &dest[0], &dest[1], &dest[2],
+ &dest[3], &dest[4], &dest[5]);
+
+ if (ret != ETH_ALEN)
+ memset(dest, 0, ETH_ALEN);
+}
+
+static void __init dir_505_a1_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(DIR_505A1_ART_ADDRESS);
+ u8 lan_mac[ETH_ALEN];
+ u8 wan_mac[ETH_ALEN];
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ gpio_request_one(DIR_505A1_GPIO_WAN_LED_ENABLE,
+ GPIOF_OUT_INIT_LOW, "WAN LED enable");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_505_a1_leds_gpio),
+ dir_505_a1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, DIR_505A1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_505_a1_gpio_keys),
+ dir_505_a1_gpio_keys);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_usb();
+
+ dir_505_a1_read_ascii_mac(lan_mac, DIR_505A1_LAN_MAC_ADDRESS);
+ dir_505_a1_read_ascii_mac(wan_mac, DIR_505A1_WAN_MAC_ADDRESS);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(art + DIR_505A1_CALDATA_OFFSET, lan_mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_505_A1, "DIR-505-A1",
+ "D-Link DIR-505 rev. A1", dir_505_a1_setup);
# See /LICENSE for more information.
#
+define Profile/DIR505A1
+ NAME:=D-Link DIR-505 rev. A1
+ PACKAGES:=
+endef
+
+define Profile/DIR505A1/Description
+ Package set optimized for the D-Link DIR-505 rev. A1.
+endef
+
+$(eval $(call Profile,DIR505A1))
+
define Profile/DIR600A1
NAME:=D-Link DIR-600 rev. A1
PACKAGES:=
cameo7240_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro
cameo913x_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro
cameo933x_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware)
+cameo933x_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,1024k(kernel),6656k(rootfs),7680k@0x80000(firmware)
cameo934x_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware)
db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
endef
define Image/Build/Cameo933x/initramfs
- $(call MkuImageLzma/initramfs,$(2),$(3) $(cameo933x_mtdlayout))
+ $(call MkuImageLzma/initramfs,$(2),$(3),$(cameo933x_mtdlayout))
+endef
+
+define Image/Build/Cameo933x_8M
+ $(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo933x_mtdlayout_8M),1048576,6422528,$(4))
+endef
+
+define Image/Build/Cameo933x_8M/initramfs
+ $(call MkuImageLzma/initramfs,$(2),$(3) $(cameo933x_mtdlayout_8M))
endef
define Image/Build/Cameo934x
endef
define Image/Build/Cameo934x/initramfs
- $(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo934x_mtdlayout))
+ $(call Image/Build/Cameo,$(1),$(2),$(3) $(cameo934x_mtdlayout))
endef
define Image/Build/Ath
$(eval $(call SingleProfile,Cameo933x,$(fs_squash),TEW712BR,tew-712br,TEW-712BR,ttyATH0,115200,"HORNET-RT-TEW712BR-3",1.99,""))
$(eval $(call SingleProfile,Cameo933x,$(fs_squash),DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA"))
+$(eval $(call SingleProfile,Cameo933x_8M,$(fs_squash),DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-RT-DIR505A1-3"))
$(eval $(call SingleProfile,Cameo934x,$(fs_64k),DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
$(eval $(call SingleProfile,Cameo934x,$(fs_64k),DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
--- /dev/null
+Index: linux-3.10.4/arch/mips/ath79/Kconfig
+===================================================================
+--- linux-3.10.4.orig/arch/mips/ath79/Kconfig 2013-08-04 19:08:12.739921385 +0200
++++ linux-3.10.4/arch/mips/ath79/Kconfig 2013-08-04 19:09:15.379922883 +0200
+@@ -254,6 +254,16 @@
+ select ATH79_DEV_USB
+ select MYLOADER
+
++config ATH79_MACH_DIR_505_A1
++ bool "D-Link DIR-505-A1 support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++ select ATH79_NVRAM
++
+ config ATH79_MACH_DIR_600_A1
+ bool "D-Link DIR-600 A1/DIR-615 E4 support"
+ select SOC_AR724X
+Index: linux-3.10.4/arch/mips/ath79/Makefile
+===================================================================
+--- linux-3.10.4.orig/arch/mips/ath79/Makefile 2013-08-04 19:07:36.299920522 +0200
++++ linux-3.10.4/arch/mips/ath79/Makefile 2013-08-04 19:09:42.363923523 +0200
+@@ -53,6 +53,7 @@
+ obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
+ obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
+ obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
++obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o
+ obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
+ obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
+ obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
+Index: linux-3.10.4/arch/mips/ath79/machtypes.h
+===================================================================
+--- linux-3.10.4.orig/arch/mips/ath79/machtypes.h 2013-08-04 19:08:12.739921385 +0200
++++ linux-3.10.4/arch/mips/ath79/machtypes.h 2013-08-04 19:09:29.715923222 +0200
+@@ -37,6 +37,7 @@
+ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
+ ATH79_MACH_DB120, /* Atheros DB120 reference board */
+ ATH79_MACH_PB44, /* Atheros PB44 reference board */
++ ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */
+ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
+ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
+ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
projects / openwrt / staging / hauke.git / commitdiff