--- /dev/null
+From patchwork Wed Nov 2 15:56:56 2016
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v9,1/3] clk: qcom: Add support for SMD-RPM Clocks
+From: Georgi Djakov <georgi.djakov@linaro.org>
+X-Patchwork-Id: 9409419
+Message-Id: <20161102155658.32203-2-georgi.djakov@linaro.org>
+To: sboyd@codeaurora.org, mturquette@baylibre.com
+Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
+ robh+dt@kernel.org, mark.rutland@arm.com,
+ linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
+ georgi.djakov@linaro.org
+Date: Wed, 2 Nov 2016 17:56:56 +0200
+
+This adds initial support for clocks controlled by the Resource
+Power Manager (RPM) processor on some Qualcomm SoCs, which use
+the qcom_smd_rpm driver to communicate with RPM.
+Such platforms are msm8916, apq8084 and msm8974.
+
+The RPM is a dedicated hardware engine for managing the shared
+SoC resources in order to keep the lowest power profile. It
+communicates with other hardware subsystems via shared memory
+and accepts clock requests, aggregates the requests and turns
+the clocks on/off or scales them on demand.
+
+This driver is based on the codeaurora.org driver:
+https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/clk/qcom/clock-rpm.c
+
+Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+---
+ .../devicetree/bindings/clock/qcom,rpmcc.txt | 36 ++
+ drivers/clk/qcom/Kconfig | 16 +
+ drivers/clk/qcom/Makefile | 1 +
+ drivers/clk/qcom/clk-smd-rpm.c | 571 +++++++++++++++++++++
+ include/dt-bindings/clock/qcom,rpmcc.h | 45 ++
+ 5 files changed, 669 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+ create mode 100644 drivers/clk/qcom/clk-smd-rpm.c
+ create mode 100644 include/dt-bindings/clock/qcom,rpmcc.h
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at http://vger.kernel.org/majordomo-info.html
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+@@ -0,0 +1,36 @@
++Qualcomm RPM Clock Controller Binding
++------------------------------------------------
++The RPM is a dedicated hardware engine for managing the shared
++SoC resources in order to keep the lowest power profile. It
++communicates with other hardware subsystems via shared memory
++and accepts clock requests, aggregates the requests and turns
++the clocks on/off or scales them on demand.
++
++Required properties :
++- compatible : shall contain only one of the following. The generic
++ compatible "qcom,rpmcc" should be also included.
++
++ "qcom,rpmcc-msm8916", "qcom,rpmcc"
++
++- #clock-cells : shall contain 1
++
++Example:
++ smd {
++ compatible = "qcom,smd";
++
++ rpm {
++ interrupts = <0 168 1>;
++ qcom,ipc = <&apcs 8 0>;
++ qcom,smd-edge = <15>;
++
++ rpm_requests {
++ compatible = "qcom,rpm-msm8916";
++ qcom,smd-channels = "rpm_requests";
++
++ rpmcc: clock-controller {
++ compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
++ #clock-cells = <1>;
++ };
++ };
++ };
++ };
+--- a/drivers/clk/qcom/Kconfig
++++ b/drivers/clk/qcom/Kconfig
+@@ -2,6 +2,9 @@ config QCOM_GDSC
+ bool
+ select PM_GENERIC_DOMAINS if PM
+
++config QCOM_RPMCC
++ bool
++
+ config COMMON_CLK_QCOM
+ tristate "Support for Qualcomm's clock controllers"
+ depends on OF
+@@ -9,6 +12,19 @@ config COMMON_CLK_QCOM
+ select REGMAP_MMIO
+ select RESET_CONTROLLER
+
++config QCOM_CLK_SMD_RPM
++ tristate "RPM over SMD based Clock Controller"
++ depends on COMMON_CLK_QCOM && QCOM_SMD_RPM
++ select QCOM_RPMCC
++ help
++ The RPM (Resource Power Manager) is a dedicated hardware engine for
++ managing the shared SoC resources in order to keep the lowest power
++ profile. It communicates with other hardware subsystems via shared
++ memory and accepts clock requests, aggregates the requests and turns
++ the clocks on/off or scales them on demand.
++ Say Y if you want to support the clocks exposed by the RPM on
++ platforms such as apq8016, apq8084, msm8974 etc.
++
+ config APQ_GCC_8084
+ tristate "APQ8084 Global Clock Controller"
+ select QCOM_GDSC
+--- a/drivers/clk/qcom/Makefile
++++ b/drivers/clk/qcom/Makefile
+@@ -22,3 +22,4 @@ obj-$(CONFIG_MSM_LCC_8960) += lcc-msm896
+ obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
+ obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
+ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
++obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
+--- /dev/null
++++ b/drivers/clk/qcom/clk-smd-rpm.c
+@@ -0,0 +1,571 @@
++/*
++ * Copyright (c) 2016, Linaro Limited
++ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk-provider.h>
++#include <linux/err.h>
++#include <linux/export.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/mutex.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/platform_device.h>
++#include <linux/soc/qcom/smd-rpm.h>
++
++#include <dt-bindings/clock/qcom,rpmcc.h>
++#include <dt-bindings/mfd/qcom-rpm.h>
++
++#define QCOM_RPM_KEY_SOFTWARE_ENABLE 0x6e657773
++#define QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY 0x62636370
++#define QCOM_RPM_SMD_KEY_RATE 0x007a484b
++#define QCOM_RPM_SMD_KEY_ENABLE 0x62616e45
++#define QCOM_RPM_SMD_KEY_STATE 0x54415453
++#define QCOM_RPM_SCALING_ENABLE_ID 0x2
++
++#define __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, stat_id, \
++ key) \
++ static struct clk_smd_rpm _platform##_##_active; \
++ static struct clk_smd_rpm _platform##_##_name = { \
++ .rpm_res_type = (type), \
++ .rpm_clk_id = (r_id), \
++ .rpm_status_id = (stat_id), \
++ .rpm_key = (key), \
++ .peer = &_platform##_##_active, \
++ .rate = INT_MAX, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_smd_rpm_ops, \
++ .name = #_name, \
++ .parent_names = (const char *[]){ "xo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }; \
++ static struct clk_smd_rpm _platform##_##_active = { \
++ .rpm_res_type = (type), \
++ .rpm_clk_id = (r_id), \
++ .rpm_status_id = (stat_id), \
++ .active_only = true, \
++ .rpm_key = (key), \
++ .peer = &_platform##_##_name, \
++ .rate = INT_MAX, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_smd_rpm_ops, \
++ .name = #_active, \
++ .parent_names = (const char *[]){ "xo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }
++
++#define __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, \
++ stat_id, r, key) \
++ static struct clk_smd_rpm _platform##_##_active; \
++ static struct clk_smd_rpm _platform##_##_name = { \
++ .rpm_res_type = (type), \
++ .rpm_clk_id = (r_id), \
++ .rpm_status_id = (stat_id), \
++ .rpm_key = (key), \
++ .branch = true, \
++ .peer = &_platform##_##_active, \
++ .rate = (r), \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_smd_rpm_branch_ops, \
++ .name = #_name, \
++ .parent_names = (const char *[]){ "xo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }; \
++ static struct clk_smd_rpm _platform##_##_active = { \
++ .rpm_res_type = (type), \
++ .rpm_clk_id = (r_id), \
++ .rpm_status_id = (stat_id), \
++ .active_only = true, \
++ .rpm_key = (key), \
++ .branch = true, \
++ .peer = &_platform##_##_name, \
++ .rate = (r), \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_smd_rpm_branch_ops, \
++ .name = #_active, \
++ .parent_names = (const char *[]){ "xo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }
++
++#define DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id) \
++ __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, \
++ 0, QCOM_RPM_SMD_KEY_RATE)
++
++#define DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, r) \
++ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, \
++ r_id, 0, r, QCOM_RPM_SMD_KEY_ENABLE)
++
++#define DEFINE_CLK_SMD_RPM_QDSS(_platform, _name, _active, type, r_id) \
++ __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, \
++ 0, QCOM_RPM_SMD_KEY_STATE)
++
++#define DEFINE_CLK_SMD_RPM_XO_BUFFER(_platform, _name, _active, r_id) \
++ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, \
++ QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000, \
++ QCOM_RPM_KEY_SOFTWARE_ENABLE)
++
++#define DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(_platform, _name, _active, r_id) \
++ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, \
++ QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000, \
++ QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY)
++
++#define to_clk_smd_rpm(_hw) container_of(_hw, struct clk_smd_rpm, hw)
++
++struct clk_smd_rpm {
++ const int rpm_res_type;
++ const int rpm_key;
++ const int rpm_clk_id;
++ const int rpm_status_id;
++ const bool active_only;
++ bool enabled;
++ bool branch;
++ struct clk_smd_rpm *peer;
++ struct clk_hw hw;
++ unsigned long rate;
++ struct qcom_smd_rpm *rpm;
++};
++
++struct clk_smd_rpm_req {
++ __le32 key;
++ __le32 nbytes;
++ __le32 value;
++};
++
++struct rpm_cc {
++ struct qcom_rpm *rpm;
++ struct clk_hw_onecell_data data;
++ struct clk_hw *hws[];
++};
++
++struct rpm_smd_clk_desc {
++ struct clk_smd_rpm **clks;
++ size_t num_clks;
++};
++
++static DEFINE_MUTEX(rpm_smd_clk_lock);
++
++static int clk_smd_rpm_handoff(struct clk_smd_rpm *r)
++{
++ int ret;
++ struct clk_smd_rpm_req req = {
++ .key = cpu_to_le32(r->rpm_key),
++ .nbytes = cpu_to_le32(sizeof(u32)),
++ .value = cpu_to_le32(INT_MAX),
++ };
++
++ ret = qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
++ r->rpm_res_type, r->rpm_clk_id, &req,
++ sizeof(req));
++ if (ret)
++ return ret;
++ ret = qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE,
++ r->rpm_res_type, r->rpm_clk_id, &req,
++ sizeof(req));
++ if (ret)
++ return ret;
++
++ return 0;
++}
++
++static int clk_smd_rpm_set_rate_active(struct clk_smd_rpm *r,
++ unsigned long rate)
++{
++ struct clk_smd_rpm_req req = {
++ .key = cpu_to_le32(r->rpm_key),
++ .nbytes = cpu_to_le32(sizeof(u32)),
++ .value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */
++ };
++
++ return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
++ r->rpm_res_type, r->rpm_clk_id, &req,
++ sizeof(req));
++}
++
++static int clk_smd_rpm_set_rate_sleep(struct clk_smd_rpm *r,
++ unsigned long rate)
++{
++ struct clk_smd_rpm_req req = {
++ .key = cpu_to_le32(r->rpm_key),
++ .nbytes = cpu_to_le32(sizeof(u32)),
++ .value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */
++ };
++
++ return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE,
++ r->rpm_res_type, r->rpm_clk_id, &req,
++ sizeof(req));
++}
++
++static void to_active_sleep(struct clk_smd_rpm *r, unsigned long rate,
++ unsigned long *active, unsigned long *sleep)
++{
++ *active = rate;
++
++ /*
++ * Active-only clocks don't care what the rate is during sleep. So,
++ * they vote for zero.
++ */
++ if (r->active_only)
++ *sleep = 0;
++ else
++ *sleep = *active;
++}
++
++static int clk_smd_rpm_prepare(struct clk_hw *hw)
++{
++ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
++ struct clk_smd_rpm *peer = r->peer;
++ unsigned long this_rate = 0, this_sleep_rate = 0;
++ unsigned long peer_rate = 0, peer_sleep_rate = 0;
++ unsigned long active_rate, sleep_rate;
++ int ret = 0;
++
++ mutex_lock(&rpm_smd_clk_lock);
++
++ /* Don't send requests to the RPM if the rate has not been set. */
++ if (!r->rate)
++ goto out;
++
++ to_active_sleep(r, r->rate, &this_rate, &this_sleep_rate);
++
++ /* Take peer clock's rate into account only if it's enabled. */
++ if (peer->enabled)
++ to_active_sleep(peer, peer->rate,
++ &peer_rate, &peer_sleep_rate);
++
++ active_rate = max(this_rate, peer_rate);
++
++ if (r->branch)
++ active_rate = !!active_rate;
++
++ ret = clk_smd_rpm_set_rate_active(r, active_rate);
++ if (ret)
++ goto out;
++
++ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
++ if (r->branch)
++ sleep_rate = !!sleep_rate;
++
++ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
++ if (ret)
++ /* Undo the active set vote and restore it */
++ ret = clk_smd_rpm_set_rate_active(r, peer_rate);
++
++out:
++ if (!ret)
++ r->enabled = true;
++
++ mutex_unlock(&rpm_smd_clk_lock);
++
++ return ret;
++}
++
++static void clk_smd_rpm_unprepare(struct clk_hw *hw)
++{
++ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
++ struct clk_smd_rpm *peer = r->peer;
++ unsigned long peer_rate = 0, peer_sleep_rate = 0;
++ unsigned long active_rate, sleep_rate;
++ int ret;
++
++ mutex_lock(&rpm_smd_clk_lock);
++
++ if (!r->rate)
++ goto out;
++
++ /* Take peer clock's rate into account only if it's enabled. */
++ if (peer->enabled)
++ to_active_sleep(peer, peer->rate, &peer_rate,
++ &peer_sleep_rate);
++
++ active_rate = r->branch ? !!peer_rate : peer_rate;
++ ret = clk_smd_rpm_set_rate_active(r, active_rate);
++ if (ret)
++ goto out;
++
++ sleep_rate = r->branch ? !!peer_sleep_rate : peer_sleep_rate;
++ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
++ if (ret)
++ goto out;
++
++ r->enabled = false;
++
++out:
++ mutex_unlock(&rpm_smd_clk_lock);
++}
++
++static int clk_smd_rpm_set_rate(struct clk_hw *hw, unsigned long rate,
++ unsigned long parent_rate)
++{
++ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
++ struct clk_smd_rpm *peer = r->peer;
++ unsigned long active_rate, sleep_rate;
++ unsigned long this_rate = 0, this_sleep_rate = 0;
++ unsigned long peer_rate = 0, peer_sleep_rate = 0;
++ int ret = 0;
++
++ mutex_lock(&rpm_smd_clk_lock);
++
++ if (!r->enabled)
++ goto out;
++
++ to_active_sleep(r, rate, &this_rate, &this_sleep_rate);
++
++ /* Take peer clock's rate into account only if it's enabled. */
++ if (peer->enabled)
++ to_active_sleep(peer, peer->rate,
++ &peer_rate, &peer_sleep_rate);
++
++ active_rate = max(this_rate, peer_rate);
++ ret = clk_smd_rpm_set_rate_active(r, active_rate);
++ if (ret)
++ goto out;
++
++ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
++ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
++ if (ret)
++ goto out;
++
++ r->rate = rate;
++
++out:
++ mutex_unlock(&rpm_smd_clk_lock);
++
++ return ret;
++}
++
++static long clk_smd_rpm_round_rate(struct clk_hw *hw, unsigned long rate,
++ unsigned long *parent_rate)
++{
++ /*
++ * RPM handles rate rounding and we don't have a way to
++ * know what the rate will be, so just return whatever
++ * rate is requested.
++ */
++ return rate;
++}
++
++static unsigned long clk_smd_rpm_recalc_rate(struct clk_hw *hw,
++ unsigned long parent_rate)
++{
++ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
++
++ /*
++ * RPM handles rate rounding and we don't have a way to
++ * know what the rate will be, so just return whatever
++ * rate was set.
++ */
++ return r->rate;
++}
++
++static int clk_smd_rpm_enable_scaling(struct qcom_smd_rpm *rpm)
++{
++ int ret;
++ struct clk_smd_rpm_req req = {
++ .key = cpu_to_le32(QCOM_RPM_SMD_KEY_ENABLE),
++ .nbytes = cpu_to_le32(sizeof(u32)),
++ .value = cpu_to_le32(1),
++ };
++
++ ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_SLEEP_STATE,
++ QCOM_SMD_RPM_MISC_CLK,
++ QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req));
++ if (ret) {
++ pr_err("RPM clock scaling (sleep set) not enabled!\n");
++ return ret;
++ }
++
++ ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_ACTIVE_STATE,
++ QCOM_SMD_RPM_MISC_CLK,
++ QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req));
++ if (ret) {
++ pr_err("RPM clock scaling (active set) not enabled!\n");
++ return ret;
++ }
++
++ pr_debug("%s: RPM clock scaling is enabled\n", __func__);
++ return 0;
++}
++
++static const struct clk_ops clk_smd_rpm_ops = {
++ .prepare = clk_smd_rpm_prepare,
++ .unprepare = clk_smd_rpm_unprepare,
++ .set_rate = clk_smd_rpm_set_rate,
++ .round_rate = clk_smd_rpm_round_rate,
++ .recalc_rate = clk_smd_rpm_recalc_rate,
++};
++
++static const struct clk_ops clk_smd_rpm_branch_ops = {
++ .prepare = clk_smd_rpm_prepare,
++ .unprepare = clk_smd_rpm_unprepare,
++ .round_rate = clk_smd_rpm_round_rate,
++ .recalc_rate = clk_smd_rpm_recalc_rate,
++};
++
++/* msm8916 */
++DEFINE_CLK_SMD_RPM(msm8916, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
++DEFINE_CLK_SMD_RPM(msm8916, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
++DEFINE_CLK_SMD_RPM(msm8916, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
++DEFINE_CLK_SMD_RPM_QDSS(msm8916, qdss_clk, qdss_a_clk, QCOM_SMD_RPM_MISC_CLK, 1);
++DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, bb_clk1, bb_clk1_a, 1);
++DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, bb_clk2, bb_clk2_a, 2);
++DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, rf_clk1, rf_clk1_a, 4);
++DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, rf_clk2, rf_clk2_a, 5);
++DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, bb_clk1_pin, bb_clk1_a_pin, 1);
++DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, bb_clk2_pin, bb_clk2_a_pin, 2);
++DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, rf_clk1_pin, rf_clk1_a_pin, 4);
++DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, rf_clk2_pin, rf_clk2_a_pin, 5);
++
++static struct clk_smd_rpm *msm8916_clks[] = {
++ [RPM_SMD_PCNOC_CLK] = &msm8916_pcnoc_clk,
++ [RPM_SMD_PCNOC_A_CLK] = &msm8916_pcnoc_a_clk,
++ [RPM_SMD_SNOC_CLK] = &msm8916_snoc_clk,
++ [RPM_SMD_SNOC_A_CLK] = &msm8916_snoc_a_clk,
++ [RPM_SMD_BIMC_CLK] = &msm8916_bimc_clk,
++ [RPM_SMD_BIMC_A_CLK] = &msm8916_bimc_a_clk,
++ [RPM_SMD_QDSS_CLK] = &msm8916_qdss_clk,
++ [RPM_SMD_QDSS_A_CLK] = &msm8916_qdss_a_clk,
++ [RPM_SMD_BB_CLK1] = &msm8916_bb_clk1,
++ [RPM_SMD_BB_CLK1_A] = &msm8916_bb_clk1_a,
++ [RPM_SMD_BB_CLK2] = &msm8916_bb_clk2,
++ [RPM_SMD_BB_CLK2_A] = &msm8916_bb_clk2_a,
++ [RPM_SMD_RF_CLK1] = &msm8916_rf_clk1,
++ [RPM_SMD_RF_CLK1_A] = &msm8916_rf_clk1_a,
++ [RPM_SMD_RF_CLK2] = &msm8916_rf_clk2,
++ [RPM_SMD_RF_CLK2_A] = &msm8916_rf_clk2_a,
++ [RPM_SMD_BB_CLK1_PIN] = &msm8916_bb_clk1_pin,
++ [RPM_SMD_BB_CLK1_A_PIN] = &msm8916_bb_clk1_a_pin,
++ [RPM_SMD_BB_CLK2_PIN] = &msm8916_bb_clk2_pin,
++ [RPM_SMD_BB_CLK2_A_PIN] = &msm8916_bb_clk2_a_pin,
++ [RPM_SMD_RF_CLK1_PIN] = &msm8916_rf_clk1_pin,
++ [RPM_SMD_RF_CLK1_A_PIN] = &msm8916_rf_clk1_a_pin,
++ [RPM_SMD_RF_CLK2_PIN] = &msm8916_rf_clk2_pin,
++ [RPM_SMD_RF_CLK2_A_PIN] = &msm8916_rf_clk2_a_pin,
++};
++
++static const struct rpm_smd_clk_desc rpm_clk_msm8916 = {
++ .clks = msm8916_clks,
++ .num_clks = ARRAY_SIZE(msm8916_clks),
++};
++
++static const struct of_device_id rpm_smd_clk_match_table[] = {
++ { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 },
++ { }
++};
++MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table);
++
++static int rpm_smd_clk_probe(struct platform_device *pdev)
++{
++ struct clk_hw **hws;
++ struct rpm_cc *rcc;
++ struct clk_hw_onecell_data *data;
++ int ret;
++ size_t num_clks, i;
++ struct qcom_smd_rpm *rpm;
++ struct clk_smd_rpm **rpm_smd_clks;
++ const struct rpm_smd_clk_desc *desc;
++
++ rpm = dev_get_drvdata(pdev->dev.parent);
++ if (!rpm) {
++ dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
++ return -ENODEV;
++ }
++
++ desc = of_device_get_match_data(&pdev->dev);
++ if (!desc)
++ return -EINVAL;
++
++ rpm_smd_clks = desc->clks;
++ num_clks = desc->num_clks;
++
++ rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*hws) * num_clks,
++ GFP_KERNEL);
++ if (!rcc)
++ return -ENOMEM;
++
++ hws = rcc->hws;
++ data = &rcc->data;
++ data->num = num_clks;
++
++ for (i = 0; i < num_clks; i++) {
++ if (!rpm_smd_clks[i]) {
++ continue;
++ }
++
++ rpm_smd_clks[i]->rpm = rpm;
++
++ ret = clk_smd_rpm_handoff(rpm_smd_clks[i]);
++ if (ret)
++ goto err;
++ }
++
++ ret = clk_smd_rpm_enable_scaling(rpm);
++ if (ret)
++ goto err;
++
++ for (i = 0; i < num_clks; i++) {
++ if (!rpm_smd_clks[i]) {
++ data->hws[i] = ERR_PTR(-ENOENT);
++ continue;
++ }
++
++ ret = devm_clk_hw_register(&pdev->dev, &rpm_smd_clks[i]->hw);
++ if (ret)
++ goto err;
++ }
++
++ ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
++ data);
++ if (ret)
++ goto err;
++
++ return 0;
++err:
++ dev_err(&pdev->dev, "Error registering SMD clock driver (%d)\n", ret);
++ return ret;
++}
++
++static int rpm_smd_clk_remove(struct platform_device *pdev)
++{
++ of_clk_del_provider(pdev->dev.of_node);
++ return 0;
++}
++
++static struct platform_driver rpm_smd_clk_driver = {
++ .driver = {
++ .name = "qcom-clk-smd-rpm",
++ .of_match_table = rpm_smd_clk_match_table,
++ },
++ .probe = rpm_smd_clk_probe,
++ .remove = rpm_smd_clk_remove,
++};
++
++static int __init rpm_smd_clk_init(void)
++{
++ return platform_driver_register(&rpm_smd_clk_driver);
++}
++core_initcall(rpm_smd_clk_init);
++
++static void __exit rpm_smd_clk_exit(void)
++{
++ platform_driver_unregister(&rpm_smd_clk_driver);
++}
++module_exit(rpm_smd_clk_exit);
++
++MODULE_DESCRIPTION("Qualcomm RPM over SMD Clock Controller Driver");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:qcom-clk-smd-rpm");
+--- /dev/null
++++ b/include/dt-bindings/clock/qcom,rpmcc.h
+@@ -0,0 +1,45 @@
++/*
++ * Copyright 2015 Linaro Limited
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H
++#define _DT_BINDINGS_CLK_MSM_RPMCC_H
++
++/* msm8916 */
++#define RPM_SMD_XO_CLK_SRC 0
++#define RPM_SMD_XO_A_CLK_SRC 1
++#define RPM_SMD_PCNOC_CLK 2
++#define RPM_SMD_PCNOC_A_CLK 3
++#define RPM_SMD_SNOC_CLK 4
++#define RPM_SMD_SNOC_A_CLK 5
++#define RPM_SMD_BIMC_CLK 6
++#define RPM_SMD_BIMC_A_CLK 7
++#define RPM_SMD_QDSS_CLK 8
++#define RPM_SMD_QDSS_A_CLK 9
++#define RPM_SMD_BB_CLK1 10
++#define RPM_SMD_BB_CLK1_A 11
++#define RPM_SMD_BB_CLK2 12
++#define RPM_SMD_BB_CLK2_A 13
++#define RPM_SMD_RF_CLK1 14
++#define RPM_SMD_RF_CLK1_A 15
++#define RPM_SMD_RF_CLK2 16
++#define RPM_SMD_RF_CLK2_A 17
++#define RPM_SMD_BB_CLK1_PIN 18
++#define RPM_SMD_BB_CLK1_A_PIN 19
++#define RPM_SMD_BB_CLK2_PIN 20
++#define RPM_SMD_BB_CLK2_A_PIN 21
++#define RPM_SMD_RF_CLK1_PIN 22
++#define RPM_SMD_RF_CLK1_A_PIN 23
++#define RPM_SMD_RF_CLK2_PIN 24
++#define RPM_SMD_RF_CLK2_A_PIN 25
++
++#endif
--- /dev/null
+From 872f91b5ea720c72f81fb46d353c43ecb3263ffa Mon Sep 17 00:00:00 2001
+From: Georgi Djakov <georgi.djakov@linaro.org>
+Date: Wed, 2 Nov 2016 17:56:57 +0200
+Subject: clk: qcom: Add support for RPM Clocks
+
+This adds initial support for clocks controlled by the Resource
+Power Manager (RPM) processor on some Qualcomm SoCs, which use
+the qcom_rpm driver to communicate with RPM.
+Such platforms are apq8064 and msm8960.
+
+Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+Acked-by: Rob Herring <robh@kernel.org>
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
+ drivers/clk/qcom/Kconfig | 13 +
+ drivers/clk/qcom/Makefile | 1 +
+ drivers/clk/qcom/clk-rpm.c | 489 +++++++++++++++++++++
+ include/dt-bindings/clock/qcom,rpmcc.h | 24 +
+ 5 files changed, 528 insertions(+)
+ create mode 100644 drivers/clk/qcom/clk-rpm.c
+
+--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
++++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+@@ -11,6 +11,7 @@ Required properties :
+ compatible "qcom,rpmcc" should be also included.
+
+ "qcom,rpmcc-msm8916", "qcom,rpmcc"
++ "qcom,rpmcc-apq8064", "qcom,rpmcc"
+
+ - #clock-cells : shall contain 1
+
+--- a/drivers/clk/qcom/Kconfig
++++ b/drivers/clk/qcom/Kconfig
+@@ -12,6 +12,19 @@ config COMMON_CLK_QCOM
+ select REGMAP_MMIO
+ select RESET_CONTROLLER
+
++config QCOM_CLK_RPM
++ tristate "RPM based Clock Controller"
++ depends on COMMON_CLK_QCOM && MFD_QCOM_RPM
++ select QCOM_RPMCC
++ help
++ The RPM (Resource Power Manager) is a dedicated hardware engine for
++ managing the shared SoC resources in order to keep the lowest power
++ profile. It communicates with other hardware subsystems via shared
++ memory and accepts clock requests, aggregates the requests and turns
++ the clocks on/off or scales them on demand.
++ Say Y if you want to support the clocks exposed by the RPM on
++ platforms such as ipq806x, msm8660, msm8960 etc.
++
+ config QCOM_CLK_SMD_RPM
+ tristate "RPM over SMD based Clock Controller"
+ depends on COMMON_CLK_QCOM && QCOM_SMD_RPM
+--- a/drivers/clk/qcom/Makefile
++++ b/drivers/clk/qcom/Makefile
+@@ -23,3 +23,4 @@ obj-$(CONFIG_MSM_GCC_8974) += gcc-msm897
+ obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
+ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
+ obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
++obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
+--- /dev/null
++++ b/drivers/clk/qcom/clk-rpm.c
+@@ -0,0 +1,489 @@
++/*
++ * Copyright (c) 2016, Linaro Limited
++ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk-provider.h>
++#include <linux/err.h>
++#include <linux/export.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/mutex.h>
++#include <linux/mfd/qcom_rpm.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/platform_device.h>
++
++#include <dt-bindings/mfd/qcom-rpm.h>
++#include <dt-bindings/clock/qcom,rpmcc.h>
++
++#define QCOM_RPM_MISC_CLK_TYPE 0x306b6c63
++#define QCOM_RPM_SCALING_ENABLE_ID 0x2
++
++#define DEFINE_CLK_RPM(_platform, _name, _active, r_id) \
++ static struct clk_rpm _platform##_##_active; \
++ static struct clk_rpm _platform##_##_name = { \
++ .rpm_clk_id = (r_id), \
++ .peer = &_platform##_##_active, \
++ .rate = INT_MAX, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_rpm_ops, \
++ .name = #_name, \
++ .parent_names = (const char *[]){ "pxo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }; \
++ static struct clk_rpm _platform##_##_active = { \
++ .rpm_clk_id = (r_id), \
++ .peer = &_platform##_##_name, \
++ .active_only = true, \
++ .rate = INT_MAX, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_rpm_ops, \
++ .name = #_active, \
++ .parent_names = (const char *[]){ "pxo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }
++
++#define DEFINE_CLK_RPM_PXO_BRANCH(_platform, _name, _active, r_id, r) \
++ static struct clk_rpm _platform##_##_active; \
++ static struct clk_rpm _platform##_##_name = { \
++ .rpm_clk_id = (r_id), \
++ .active_only = true, \
++ .peer = &_platform##_##_active, \
++ .rate = (r), \
++ .branch = true, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_rpm_branch_ops, \
++ .name = #_name, \
++ .parent_names = (const char *[]){ "pxo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }; \
++ static struct clk_rpm _platform##_##_active = { \
++ .rpm_clk_id = (r_id), \
++ .peer = &_platform##_##_name, \
++ .rate = (r), \
++ .branch = true, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_rpm_branch_ops, \
++ .name = #_active, \
++ .parent_names = (const char *[]){ "pxo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }
++
++#define DEFINE_CLK_RPM_CXO_BRANCH(_platform, _name, _active, r_id, r) \
++ static struct clk_rpm _platform##_##_active; \
++ static struct clk_rpm _platform##_##_name = { \
++ .rpm_clk_id = (r_id), \
++ .peer = &_platform##_##_active, \
++ .rate = (r), \
++ .branch = true, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_rpm_branch_ops, \
++ .name = #_name, \
++ .parent_names = (const char *[]){ "cxo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }; \
++ static struct clk_rpm _platform##_##_active = { \
++ .rpm_clk_id = (r_id), \
++ .active_only = true, \
++ .peer = &_platform##_##_name, \
++ .rate = (r), \
++ .branch = true, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_rpm_branch_ops, \
++ .name = #_active, \
++ .parent_names = (const char *[]){ "cxo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }
++
++#define to_clk_rpm(_hw) container_of(_hw, struct clk_rpm, hw)
++
++struct clk_rpm {
++ const int rpm_clk_id;
++ const bool active_only;
++ unsigned long rate;
++ bool enabled;
++ bool branch;
++ struct clk_rpm *peer;
++ struct clk_hw hw;
++ struct qcom_rpm *rpm;
++};
++
++struct rpm_cc {
++ struct qcom_rpm *rpm;
++ struct clk_hw_onecell_data data;
++ struct clk_hw *hws[];
++};
++
++struct rpm_clk_desc {
++ struct clk_rpm **clks;
++ size_t num_clks;
++};
++
++static DEFINE_MUTEX(rpm_clk_lock);
++
++static int clk_rpm_handoff(struct clk_rpm *r)
++{
++ int ret;
++ u32 value = INT_MAX;
++
++ ret = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE,
++ r->rpm_clk_id, &value, 1);
++ if (ret)
++ return ret;
++ ret = qcom_rpm_write(r->rpm, QCOM_RPM_SLEEP_STATE,
++ r->rpm_clk_id, &value, 1);
++ if (ret)
++ return ret;
++
++ return 0;
++}
++
++static int clk_rpm_set_rate_active(struct clk_rpm *r, unsigned long rate)
++{
++ u32 value = DIV_ROUND_UP(rate, 1000); /* to kHz */
++
++ return qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE,
++ r->rpm_clk_id, &value, 1);
++}
++
++static int clk_rpm_set_rate_sleep(struct clk_rpm *r, unsigned long rate)
++{
++ u32 value = DIV_ROUND_UP(rate, 1000); /* to kHz */
++
++ return qcom_rpm_write(r->rpm, QCOM_RPM_SLEEP_STATE,
++ r->rpm_clk_id, &value, 1);
++}
++
++static void to_active_sleep(struct clk_rpm *r, unsigned long rate,
++ unsigned long *active, unsigned long *sleep)
++{
++ *active = rate;
++
++ /*
++ * Active-only clocks don't care what the rate is during sleep. So,
++ * they vote for zero.
++ */
++ if (r->active_only)
++ *sleep = 0;
++ else
++ *sleep = *active;
++}
++
++static int clk_rpm_prepare(struct clk_hw *hw)
++{
++ struct clk_rpm *r = to_clk_rpm(hw);
++ struct clk_rpm *peer = r->peer;
++ unsigned long this_rate = 0, this_sleep_rate = 0;
++ unsigned long peer_rate = 0, peer_sleep_rate = 0;
++ unsigned long active_rate, sleep_rate;
++ int ret = 0;
++
++ mutex_lock(&rpm_clk_lock);
++
++ /* Don't send requests to the RPM if the rate has not been set. */
++ if (!r->rate)
++ goto out;
++
++ to_active_sleep(r, r->rate, &this_rate, &this_sleep_rate);
++
++ /* Take peer clock's rate into account only if it's enabled. */
++ if (peer->enabled)
++ to_active_sleep(peer, peer->rate,
++ &peer_rate, &peer_sleep_rate);
++
++ active_rate = max(this_rate, peer_rate);
++
++ if (r->branch)
++ active_rate = !!active_rate;
++
++ ret = clk_rpm_set_rate_active(r, active_rate);
++ if (ret)
++ goto out;
++
++ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
++ if (r->branch)
++ sleep_rate = !!sleep_rate;
++
++ ret = clk_rpm_set_rate_sleep(r, sleep_rate);
++ if (ret)
++ /* Undo the active set vote and restore it */
++ ret = clk_rpm_set_rate_active(r, peer_rate);
++
++out:
++ if (!ret)
++ r->enabled = true;
++
++ mutex_unlock(&rpm_clk_lock);
++
++ return ret;
++}
++
++static void clk_rpm_unprepare(struct clk_hw *hw)
++{
++ struct clk_rpm *r = to_clk_rpm(hw);
++ struct clk_rpm *peer = r->peer;
++ unsigned long peer_rate = 0, peer_sleep_rate = 0;
++ unsigned long active_rate, sleep_rate;
++ int ret;
++
++ mutex_lock(&rpm_clk_lock);
++
++ if (!r->rate)
++ goto out;
++
++ /* Take peer clock's rate into account only if it's enabled. */
++ if (peer->enabled)
++ to_active_sleep(peer, peer->rate, &peer_rate,
++ &peer_sleep_rate);
++
++ active_rate = r->branch ? !!peer_rate : peer_rate;
++ ret = clk_rpm_set_rate_active(r, active_rate);
++ if (ret)
++ goto out;
++
++ sleep_rate = r->branch ? !!peer_sleep_rate : peer_sleep_rate;
++ ret = clk_rpm_set_rate_sleep(r, sleep_rate);
++ if (ret)
++ goto out;
++
++ r->enabled = false;
++
++out:
++ mutex_unlock(&rpm_clk_lock);
++}
++
++static int clk_rpm_set_rate(struct clk_hw *hw,
++ unsigned long rate, unsigned long parent_rate)
++{
++ struct clk_rpm *r = to_clk_rpm(hw);
++ struct clk_rpm *peer = r->peer;
++ unsigned long active_rate, sleep_rate;
++ unsigned long this_rate = 0, this_sleep_rate = 0;
++ unsigned long peer_rate = 0, peer_sleep_rate = 0;
++ int ret = 0;
++
++ mutex_lock(&rpm_clk_lock);
++
++ if (!r->enabled)
++ goto out;
++
++ to_active_sleep(r, rate, &this_rate, &this_sleep_rate);
++
++ /* Take peer clock's rate into account only if it's enabled. */
++ if (peer->enabled)
++ to_active_sleep(peer, peer->rate,
++ &peer_rate, &peer_sleep_rate);
++
++ active_rate = max(this_rate, peer_rate);
++ ret = clk_rpm_set_rate_active(r, active_rate);
++ if (ret)
++ goto out;
++
++ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
++ ret = clk_rpm_set_rate_sleep(r, sleep_rate);
++ if (ret)
++ goto out;
++
++ r->rate = rate;
++
++out:
++ mutex_unlock(&rpm_clk_lock);
++
++ return ret;
++}
++
++static long clk_rpm_round_rate(struct clk_hw *hw, unsigned long rate,
++ unsigned long *parent_rate)
++{
++ /*
++ * RPM handles rate rounding and we don't have a way to
++ * know what the rate will be, so just return whatever
++ * rate is requested.
++ */
++ return rate;
++}
++
++static unsigned long clk_rpm_recalc_rate(struct clk_hw *hw,
++ unsigned long parent_rate)
++{
++ struct clk_rpm *r = to_clk_rpm(hw);
++
++ /*
++ * RPM handles rate rounding and we don't have a way to
++ * know what the rate will be, so just return whatever
++ * rate was set.
++ */
++ return r->rate;
++}
++
++static const struct clk_ops clk_rpm_ops = {
++ .prepare = clk_rpm_prepare,
++ .unprepare = clk_rpm_unprepare,
++ .set_rate = clk_rpm_set_rate,
++ .round_rate = clk_rpm_round_rate,
++ .recalc_rate = clk_rpm_recalc_rate,
++};
++
++static const struct clk_ops clk_rpm_branch_ops = {
++ .prepare = clk_rpm_prepare,
++ .unprepare = clk_rpm_unprepare,
++ .round_rate = clk_rpm_round_rate,
++ .recalc_rate = clk_rpm_recalc_rate,
++};
++
++/* apq8064 */
++DEFINE_CLK_RPM(apq8064, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
++DEFINE_CLK_RPM(apq8064, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
++DEFINE_CLK_RPM(apq8064, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK);
++DEFINE_CLK_RPM(apq8064, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK);
++DEFINE_CLK_RPM(apq8064, mmfab_clk, mmfab_a_clk, QCOM_RPM_MM_FABRIC_CLK);
++DEFINE_CLK_RPM(apq8064, mmfpb_clk, mmfpb_a_clk, QCOM_RPM_MMFPB_CLK);
++DEFINE_CLK_RPM(apq8064, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK);
++DEFINE_CLK_RPM(apq8064, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
++DEFINE_CLK_RPM(apq8064, qdss_clk, qdss_a_clk, QCOM_RPM_QDSS_CLK);
++
++static struct clk_rpm *apq8064_clks[] = {
++ [RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk,
++ [RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk,
++ [RPM_CFPB_CLK] = &apq8064_cfpb_clk,
++ [RPM_CFPB_A_CLK] = &apq8064_cfpb_a_clk,
++ [RPM_DAYTONA_FABRIC_CLK] = &apq8064_daytona_clk,
++ [RPM_DAYTONA_FABRIC_A_CLK] = &apq8064_daytona_a_clk,
++ [RPM_EBI1_CLK] = &apq8064_ebi1_clk,
++ [RPM_EBI1_A_CLK] = &apq8064_ebi1_a_clk,
++ [RPM_MM_FABRIC_CLK] = &apq8064_mmfab_clk,
++ [RPM_MM_FABRIC_A_CLK] = &apq8064_mmfab_a_clk,
++ [RPM_MMFPB_CLK] = &apq8064_mmfpb_clk,
++ [RPM_MMFPB_A_CLK] = &apq8064_mmfpb_a_clk,
++ [RPM_SYS_FABRIC_CLK] = &apq8064_sfab_clk,
++ [RPM_SYS_FABRIC_A_CLK] = &apq8064_sfab_a_clk,
++ [RPM_SFPB_CLK] = &apq8064_sfpb_clk,
++ [RPM_SFPB_A_CLK] = &apq8064_sfpb_a_clk,
++ [RPM_QDSS_CLK] = &apq8064_qdss_clk,
++ [RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk,
++};
++
++static const struct rpm_clk_desc rpm_clk_apq8064 = {
++ .clks = apq8064_clks,
++ .num_clks = ARRAY_SIZE(apq8064_clks),
++};
++
++static const struct of_device_id rpm_clk_match_table[] = {
++ { .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
++ { }
++};
++MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
++
++static int rpm_clk_probe(struct platform_device *pdev)
++{
++ struct clk_hw **hws;
++ struct rpm_cc *rcc;
++ struct clk_hw_onecell_data *data;
++ int ret;
++ size_t num_clks, i;
++ struct qcom_rpm *rpm;
++ struct clk_rpm **rpm_clks;
++ const struct rpm_clk_desc *desc;
++
++ rpm = dev_get_drvdata(pdev->dev.parent);
++ if (!rpm) {
++ dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
++ return -ENODEV;
++ }
++
++ desc = of_device_get_match_data(&pdev->dev);
++ if (!desc)
++ return -EINVAL;
++
++ rpm_clks = desc->clks;
++ num_clks = desc->num_clks;
++
++ rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*hws) * num_clks,
++ GFP_KERNEL);
++ if (!rcc)
++ return -ENOMEM;
++
++ hws = rcc->hws;
++ data = &rcc->data;
++ data->num = num_clks;
++
++ for (i = 0; i < num_clks; i++) {
++ if (!rpm_clks[i])
++ continue;
++
++ rpm_clks[i]->rpm = rpm;
++
++ ret = clk_rpm_handoff(rpm_clks[i]);
++ if (ret)
++ goto err;
++ }
++
++ for (i = 0; i < num_clks; i++) {
++ if (!rpm_clks[i]) {
++ data->hws[i] = ERR_PTR(-ENOENT);
++ continue;
++ }
++
++ ret = devm_clk_hw_register(&pdev->dev, &rpm_clks[i]->hw);
++ if (ret)
++ goto err;
++ }
++
++ ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
++ data);
++ if (ret)
++ goto err;
++
++ return 0;
++err:
++ dev_err(&pdev->dev, "Error registering RPM Clock driver (%d)\n", ret);
++ return ret;
++}
++
++static int rpm_clk_remove(struct platform_device *pdev)
++{
++ of_clk_del_provider(pdev->dev.of_node);
++ return 0;
++}
++
++static struct platform_driver rpm_clk_driver = {
++ .driver = {
++ .name = "qcom-clk-rpm",
++ .of_match_table = rpm_clk_match_table,
++ },
++ .probe = rpm_clk_probe,
++ .remove = rpm_clk_remove,
++};
++
++static int __init rpm_clk_init(void)
++{
++ return platform_driver_register(&rpm_clk_driver);
++}
++core_initcall(rpm_clk_init);
++
++static void __exit rpm_clk_exit(void)
++{
++ platform_driver_unregister(&rpm_clk_driver);
++}
++module_exit(rpm_clk_exit);
++
++MODULE_DESCRIPTION("Qualcomm RPM Clock Controller Driver");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:qcom-clk-rpm");
+--- a/include/dt-bindings/clock/qcom,rpmcc.h
++++ b/include/dt-bindings/clock/qcom,rpmcc.h
+@@ -14,6 +14,30 @@
+ #ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H
+ #define _DT_BINDINGS_CLK_MSM_RPMCC_H
+
++/* apq8064 */
++#define RPM_PXO_CLK 0
++#define RPM_PXO_A_CLK 1
++#define RPM_CXO_CLK 2
++#define RPM_CXO_A_CLK 3
++#define RPM_APPS_FABRIC_CLK 4
++#define RPM_APPS_FABRIC_A_CLK 5
++#define RPM_CFPB_CLK 6
++#define RPM_CFPB_A_CLK 7
++#define RPM_QDSS_CLK 8
++#define RPM_QDSS_A_CLK 9
++#define RPM_DAYTONA_FABRIC_CLK 10
++#define RPM_DAYTONA_FABRIC_A_CLK 11
++#define RPM_EBI1_CLK 12
++#define RPM_EBI1_A_CLK 13
++#define RPM_MM_FABRIC_CLK 14
++#define RPM_MM_FABRIC_A_CLK 15
++#define RPM_MMFPB_CLK 16
++#define RPM_MMFPB_A_CLK 17
++#define RPM_SYS_FABRIC_CLK 18
++#define RPM_SYS_FABRIC_A_CLK 19
++#define RPM_SFPB_CLK 20
++#define RPM_SFPB_A_CLK 21
++
+ /* msm8916 */
+ #define RPM_SMD_XO_CLK_SRC 0
+ #define RPM_SMD_XO_A_CLK_SRC 1
--- /dev/null
+From c260524aba53b57f72b5446ed553080df30b4d09 Mon Sep 17 00:00:00 2001
+From: Georgi Djakov <georgi.djakov@linaro.org>
+Date: Wed, 23 Nov 2016 16:52:49 +0200
+Subject: clk: qcom: clk-rpm: Fix clk_hw references
+
+Fix the clk_hw references to the actual clocks and add a xlate function
+to return the hw pointers from the already existing static array.
+
+Reported-by: Michael Scott <michael.scott@linaro.org>
+Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ drivers/clk/qcom/clk-rpm.c | 36 ++++++++++++++++++++++--------------
+ 1 file changed, 22 insertions(+), 14 deletions(-)
+
+--- a/drivers/clk/qcom/clk-rpm.c
++++ b/drivers/clk/qcom/clk-rpm.c
+@@ -127,8 +127,8 @@ struct clk_rpm {
+
+ struct rpm_cc {
+ struct qcom_rpm *rpm;
+- struct clk_hw_onecell_data data;
+- struct clk_hw *hws[];
++ struct clk_rpm **clks;
++ size_t num_clks;
+ };
+
+ struct rpm_clk_desc {
+@@ -391,11 +391,23 @@ static const struct of_device_id rpm_clk
+ };
+ MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
+
++static struct clk_hw *qcom_rpm_clk_hw_get(struct of_phandle_args *clkspec,
++ void *data)
++{
++ struct rpm_cc *rcc = data;
++ unsigned int idx = clkspec->args[0];
++
++ if (idx >= rcc->num_clks) {
++ pr_err("%s: invalid index %u\n", __func__, idx);
++ return ERR_PTR(-EINVAL);
++ }
++
++ return rcc->clks[idx] ? &rcc->clks[idx]->hw : ERR_PTR(-ENOENT);
++}
++
+ static int rpm_clk_probe(struct platform_device *pdev)
+ {
+- struct clk_hw **hws;
+ struct rpm_cc *rcc;
+- struct clk_hw_onecell_data *data;
+ int ret;
+ size_t num_clks, i;
+ struct qcom_rpm *rpm;
+@@ -415,14 +427,12 @@ static int rpm_clk_probe(struct platform
+ rpm_clks = desc->clks;
+ num_clks = desc->num_clks;
+
+- rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*hws) * num_clks,
+- GFP_KERNEL);
++ rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc), GFP_KERNEL);
+ if (!rcc)
+ return -ENOMEM;
+
+- hws = rcc->hws;
+- data = &rcc->data;
+- data->num = num_clks;
++ rcc->clks = rpm_clks;
++ rcc->num_clks = num_clks;
+
+ for (i = 0; i < num_clks; i++) {
+ if (!rpm_clks[i])
+@@ -436,18 +446,16 @@ static int rpm_clk_probe(struct platform
+ }
+
+ for (i = 0; i < num_clks; i++) {
+- if (!rpm_clks[i]) {
+- data->hws[i] = ERR_PTR(-ENOENT);
++ if (!rpm_clks[i])
+ continue;
+- }
+
+ ret = devm_clk_hw_register(&pdev->dev, &rpm_clks[i]->hw);
+ if (ret)
+ goto err;
+ }
+
+- ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
+- data);
++ ret = of_clk_add_hw_provider(pdev->dev.of_node, qcom_rpm_clk_hw_get,
++ rcc);
+ if (ret)
+ goto err;
+
+ };
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
-@@ -106,3 +106,11 @@ config MSM_MMCC_8974
+@@ -135,3 +135,11 @@ config MSM_MMCC_8974
Support for the multimedia clock controller on msm8974 devices.
Say Y if you want to support multimedia devices such as display,
graphics, video encode/decode, camera, etc.
+ such as MSM8974, APQ8084, etc.
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
-@@ -23,3 +23,4 @@ obj-$(CONFIG_MSM_LCC_8960) += lcc-msm896
- obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
- obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
+@@ -25,3 +25,4 @@ obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8
obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
+ obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
+ obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
+obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
--- /dev/null
+++ b/drivers/clk/qcom/hfpll.c
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
-@@ -114,3 +114,7 @@ config QCOM_HFPLL
+@@ -143,3 +143,7 @@ config QCOM_HFPLL
Support for the high-frequency PLLs present on Qualcomm devices.
Say Y if you want to support CPU frequency scaling on devices
such as MSM8974, APQ8084, etc.
+ };
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
-@@ -115,6 +115,14 @@ config QCOM_HFPLL
+@@ -144,6 +144,14 @@ config QCOM_HFPLL
Say Y if you want to support CPU frequency scaling on devices
such as MSM8974, APQ8084, etc.
+ };
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
-@@ -123,6 +123,14 @@ config KPSS_XCC
+@@ -152,6 +152,14 @@ config KPSS_XCC
if you want to support CPU frequency scaling on devices such
as MSM8960, APQ8064, etc.
select KRAIT_L2_ACCESSORS
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
-@@ -26,3 +26,4 @@ obj-$(CONFIG_MSM_GCC_8974) += gcc-msm897
- obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
- obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
+@@ -28,3 +28,4 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8
+ obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
+ obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
+obj-$(CONFIG_KRAITCC) += krait-cc.o
--- /dev/null
+++ /dev/null
-From patchwork Wed Nov 2 15:56:56 2016
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v9,1/3] clk: qcom: Add support for SMD-RPM Clocks
-From: Georgi Djakov <georgi.djakov@linaro.org>
-X-Patchwork-Id: 9409419
-Message-Id: <20161102155658.32203-2-georgi.djakov@linaro.org>
-To: sboyd@codeaurora.org, mturquette@baylibre.com
-Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
- robh+dt@kernel.org, mark.rutland@arm.com,
- linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
- georgi.djakov@linaro.org
-Date: Wed, 2 Nov 2016 17:56:56 +0200
-
-This adds initial support for clocks controlled by the Resource
-Power Manager (RPM) processor on some Qualcomm SoCs, which use
-the qcom_smd_rpm driver to communicate with RPM.
-Such platforms are msm8916, apq8084 and msm8974.
-
-The RPM is a dedicated hardware engine for managing the shared
-SoC resources in order to keep the lowest power profile. It
-communicates with other hardware subsystems via shared memory
-and accepts clock requests, aggregates the requests and turns
-the clocks on/off or scales them on demand.
-
-This driver is based on the codeaurora.org driver:
-https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/clk/qcom/clock-rpm.c
-
-Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
----
- .../devicetree/bindings/clock/qcom,rpmcc.txt | 36 ++
- drivers/clk/qcom/Kconfig | 16 +
- drivers/clk/qcom/Makefile | 1 +
- drivers/clk/qcom/clk-smd-rpm.c | 571 +++++++++++++++++++++
- include/dt-bindings/clock/qcom,rpmcc.h | 45 ++
- 5 files changed, 669 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
- create mode 100644 drivers/clk/qcom/clk-smd-rpm.c
- create mode 100644 include/dt-bindings/clock/qcom,rpmcc.h
-
---
-To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at http://vger.kernel.org/majordomo-info.html
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
-@@ -0,0 +1,36 @@
-+Qualcomm RPM Clock Controller Binding
-+------------------------------------------------
-+The RPM is a dedicated hardware engine for managing the shared
-+SoC resources in order to keep the lowest power profile. It
-+communicates with other hardware subsystems via shared memory
-+and accepts clock requests, aggregates the requests and turns
-+the clocks on/off or scales them on demand.
-+
-+Required properties :
-+- compatible : shall contain only one of the following. The generic
-+ compatible "qcom,rpmcc" should be also included.
-+
-+ "qcom,rpmcc-msm8916", "qcom,rpmcc"
-+
-+- #clock-cells : shall contain 1
-+
-+Example:
-+ smd {
-+ compatible = "qcom,smd";
-+
-+ rpm {
-+ interrupts = <0 168 1>;
-+ qcom,ipc = <&apcs 8 0>;
-+ qcom,smd-edge = <15>;
-+
-+ rpm_requests {
-+ compatible = "qcom,rpm-msm8916";
-+ qcom,smd-channels = "rpm_requests";
-+
-+ rpmcc: clock-controller {
-+ compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
-+ #clock-cells = <1>;
-+ };
-+ };
-+ };
-+ };
---- a/drivers/clk/qcom/Kconfig
-+++ b/drivers/clk/qcom/Kconfig
-@@ -2,6 +2,9 @@ config QCOM_GDSC
- bool
- select PM_GENERIC_DOMAINS if PM
-
-+config QCOM_RPMCC
-+ bool
-+
- config COMMON_CLK_QCOM
- tristate "Support for Qualcomm's clock controllers"
- depends on OF
-@@ -9,6 +12,19 @@ config COMMON_CLK_QCOM
- select REGMAP_MMIO
- select RESET_CONTROLLER
-
-+config QCOM_CLK_SMD_RPM
-+ tristate "RPM over SMD based Clock Controller"
-+ depends on COMMON_CLK_QCOM && QCOM_SMD_RPM
-+ select QCOM_RPMCC
-+ help
-+ The RPM (Resource Power Manager) is a dedicated hardware engine for
-+ managing the shared SoC resources in order to keep the lowest power
-+ profile. It communicates with other hardware subsystems via shared
-+ memory and accepts clock requests, aggregates the requests and turns
-+ the clocks on/off or scales them on demand.
-+ Say Y if you want to support the clocks exposed by the RPM on
-+ platforms such as apq8016, apq8084, msm8974 etc.
-+
- config APQ_GCC_8084
- tristate "APQ8084 Global Clock Controller"
- select QCOM_GDSC
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -28,3 +28,4 @@ obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8
- obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
- obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
- obj-$(CONFIG_KRAITCC) += krait-cc.o
-+obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
---- /dev/null
-+++ b/drivers/clk/qcom/clk-smd-rpm.c
-@@ -0,0 +1,571 @@
-+/*
-+ * Copyright (c) 2016, Linaro Limited
-+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/err.h>
-+#include <linux/export.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/soc/qcom/smd-rpm.h>
-+
-+#include <dt-bindings/clock/qcom,rpmcc.h>
-+#include <dt-bindings/mfd/qcom-rpm.h>
-+
-+#define QCOM_RPM_KEY_SOFTWARE_ENABLE 0x6e657773
-+#define QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY 0x62636370
-+#define QCOM_RPM_SMD_KEY_RATE 0x007a484b
-+#define QCOM_RPM_SMD_KEY_ENABLE 0x62616e45
-+#define QCOM_RPM_SMD_KEY_STATE 0x54415453
-+#define QCOM_RPM_SCALING_ENABLE_ID 0x2
-+
-+#define __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, stat_id, \
-+ key) \
-+ static struct clk_smd_rpm _platform##_##_active; \
-+ static struct clk_smd_rpm _platform##_##_name = { \
-+ .rpm_res_type = (type), \
-+ .rpm_clk_id = (r_id), \
-+ .rpm_status_id = (stat_id), \
-+ .rpm_key = (key), \
-+ .peer = &_platform##_##_active, \
-+ .rate = INT_MAX, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_smd_rpm_ops, \
-+ .name = #_name, \
-+ .parent_names = (const char *[]){ "xo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }; \
-+ static struct clk_smd_rpm _platform##_##_active = { \
-+ .rpm_res_type = (type), \
-+ .rpm_clk_id = (r_id), \
-+ .rpm_status_id = (stat_id), \
-+ .active_only = true, \
-+ .rpm_key = (key), \
-+ .peer = &_platform##_##_name, \
-+ .rate = INT_MAX, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_smd_rpm_ops, \
-+ .name = #_active, \
-+ .parent_names = (const char *[]){ "xo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }
-+
-+#define __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, \
-+ stat_id, r, key) \
-+ static struct clk_smd_rpm _platform##_##_active; \
-+ static struct clk_smd_rpm _platform##_##_name = { \
-+ .rpm_res_type = (type), \
-+ .rpm_clk_id = (r_id), \
-+ .rpm_status_id = (stat_id), \
-+ .rpm_key = (key), \
-+ .branch = true, \
-+ .peer = &_platform##_##_active, \
-+ .rate = (r), \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_smd_rpm_branch_ops, \
-+ .name = #_name, \
-+ .parent_names = (const char *[]){ "xo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }; \
-+ static struct clk_smd_rpm _platform##_##_active = { \
-+ .rpm_res_type = (type), \
-+ .rpm_clk_id = (r_id), \
-+ .rpm_status_id = (stat_id), \
-+ .active_only = true, \
-+ .rpm_key = (key), \
-+ .branch = true, \
-+ .peer = &_platform##_##_name, \
-+ .rate = (r), \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_smd_rpm_branch_ops, \
-+ .name = #_active, \
-+ .parent_names = (const char *[]){ "xo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }
-+
-+#define DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id) \
-+ __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, \
-+ 0, QCOM_RPM_SMD_KEY_RATE)
-+
-+#define DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, r) \
-+ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, \
-+ r_id, 0, r, QCOM_RPM_SMD_KEY_ENABLE)
-+
-+#define DEFINE_CLK_SMD_RPM_QDSS(_platform, _name, _active, type, r_id) \
-+ __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, \
-+ 0, QCOM_RPM_SMD_KEY_STATE)
-+
-+#define DEFINE_CLK_SMD_RPM_XO_BUFFER(_platform, _name, _active, r_id) \
-+ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, \
-+ QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000, \
-+ QCOM_RPM_KEY_SOFTWARE_ENABLE)
-+
-+#define DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(_platform, _name, _active, r_id) \
-+ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, \
-+ QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000, \
-+ QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY)
-+
-+#define to_clk_smd_rpm(_hw) container_of(_hw, struct clk_smd_rpm, hw)
-+
-+struct clk_smd_rpm {
-+ const int rpm_res_type;
-+ const int rpm_key;
-+ const int rpm_clk_id;
-+ const int rpm_status_id;
-+ const bool active_only;
-+ bool enabled;
-+ bool branch;
-+ struct clk_smd_rpm *peer;
-+ struct clk_hw hw;
-+ unsigned long rate;
-+ struct qcom_smd_rpm *rpm;
-+};
-+
-+struct clk_smd_rpm_req {
-+ __le32 key;
-+ __le32 nbytes;
-+ __le32 value;
-+};
-+
-+struct rpm_cc {
-+ struct qcom_rpm *rpm;
-+ struct clk_hw_onecell_data data;
-+ struct clk_hw *hws[];
-+};
-+
-+struct rpm_smd_clk_desc {
-+ struct clk_smd_rpm **clks;
-+ size_t num_clks;
-+};
-+
-+static DEFINE_MUTEX(rpm_smd_clk_lock);
-+
-+static int clk_smd_rpm_handoff(struct clk_smd_rpm *r)
-+{
-+ int ret;
-+ struct clk_smd_rpm_req req = {
-+ .key = cpu_to_le32(r->rpm_key),
-+ .nbytes = cpu_to_le32(sizeof(u32)),
-+ .value = cpu_to_le32(INT_MAX),
-+ };
-+
-+ ret = qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
-+ r->rpm_res_type, r->rpm_clk_id, &req,
-+ sizeof(req));
-+ if (ret)
-+ return ret;
-+ ret = qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE,
-+ r->rpm_res_type, r->rpm_clk_id, &req,
-+ sizeof(req));
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static int clk_smd_rpm_set_rate_active(struct clk_smd_rpm *r,
-+ unsigned long rate)
-+{
-+ struct clk_smd_rpm_req req = {
-+ .key = cpu_to_le32(r->rpm_key),
-+ .nbytes = cpu_to_le32(sizeof(u32)),
-+ .value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */
-+ };
-+
-+ return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
-+ r->rpm_res_type, r->rpm_clk_id, &req,
-+ sizeof(req));
-+}
-+
-+static int clk_smd_rpm_set_rate_sleep(struct clk_smd_rpm *r,
-+ unsigned long rate)
-+{
-+ struct clk_smd_rpm_req req = {
-+ .key = cpu_to_le32(r->rpm_key),
-+ .nbytes = cpu_to_le32(sizeof(u32)),
-+ .value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */
-+ };
-+
-+ return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE,
-+ r->rpm_res_type, r->rpm_clk_id, &req,
-+ sizeof(req));
-+}
-+
-+static void to_active_sleep(struct clk_smd_rpm *r, unsigned long rate,
-+ unsigned long *active, unsigned long *sleep)
-+{
-+ *active = rate;
-+
-+ /*
-+ * Active-only clocks don't care what the rate is during sleep. So,
-+ * they vote for zero.
-+ */
-+ if (r->active_only)
-+ *sleep = 0;
-+ else
-+ *sleep = *active;
-+}
-+
-+static int clk_smd_rpm_prepare(struct clk_hw *hw)
-+{
-+ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
-+ struct clk_smd_rpm *peer = r->peer;
-+ unsigned long this_rate = 0, this_sleep_rate = 0;
-+ unsigned long peer_rate = 0, peer_sleep_rate = 0;
-+ unsigned long active_rate, sleep_rate;
-+ int ret = 0;
-+
-+ mutex_lock(&rpm_smd_clk_lock);
-+
-+ /* Don't send requests to the RPM if the rate has not been set. */
-+ if (!r->rate)
-+ goto out;
-+
-+ to_active_sleep(r, r->rate, &this_rate, &this_sleep_rate);
-+
-+ /* Take peer clock's rate into account only if it's enabled. */
-+ if (peer->enabled)
-+ to_active_sleep(peer, peer->rate,
-+ &peer_rate, &peer_sleep_rate);
-+
-+ active_rate = max(this_rate, peer_rate);
-+
-+ if (r->branch)
-+ active_rate = !!active_rate;
-+
-+ ret = clk_smd_rpm_set_rate_active(r, active_rate);
-+ if (ret)
-+ goto out;
-+
-+ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
-+ if (r->branch)
-+ sleep_rate = !!sleep_rate;
-+
-+ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
-+ if (ret)
-+ /* Undo the active set vote and restore it */
-+ ret = clk_smd_rpm_set_rate_active(r, peer_rate);
-+
-+out:
-+ if (!ret)
-+ r->enabled = true;
-+
-+ mutex_unlock(&rpm_smd_clk_lock);
-+
-+ return ret;
-+}
-+
-+static void clk_smd_rpm_unprepare(struct clk_hw *hw)
-+{
-+ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
-+ struct clk_smd_rpm *peer = r->peer;
-+ unsigned long peer_rate = 0, peer_sleep_rate = 0;
-+ unsigned long active_rate, sleep_rate;
-+ int ret;
-+
-+ mutex_lock(&rpm_smd_clk_lock);
-+
-+ if (!r->rate)
-+ goto out;
-+
-+ /* Take peer clock's rate into account only if it's enabled. */
-+ if (peer->enabled)
-+ to_active_sleep(peer, peer->rate, &peer_rate,
-+ &peer_sleep_rate);
-+
-+ active_rate = r->branch ? !!peer_rate : peer_rate;
-+ ret = clk_smd_rpm_set_rate_active(r, active_rate);
-+ if (ret)
-+ goto out;
-+
-+ sleep_rate = r->branch ? !!peer_sleep_rate : peer_sleep_rate;
-+ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
-+ if (ret)
-+ goto out;
-+
-+ r->enabled = false;
-+
-+out:
-+ mutex_unlock(&rpm_smd_clk_lock);
-+}
-+
-+static int clk_smd_rpm_set_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long parent_rate)
-+{
-+ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
-+ struct clk_smd_rpm *peer = r->peer;
-+ unsigned long active_rate, sleep_rate;
-+ unsigned long this_rate = 0, this_sleep_rate = 0;
-+ unsigned long peer_rate = 0, peer_sleep_rate = 0;
-+ int ret = 0;
-+
-+ mutex_lock(&rpm_smd_clk_lock);
-+
-+ if (!r->enabled)
-+ goto out;
-+
-+ to_active_sleep(r, rate, &this_rate, &this_sleep_rate);
-+
-+ /* Take peer clock's rate into account only if it's enabled. */
-+ if (peer->enabled)
-+ to_active_sleep(peer, peer->rate,
-+ &peer_rate, &peer_sleep_rate);
-+
-+ active_rate = max(this_rate, peer_rate);
-+ ret = clk_smd_rpm_set_rate_active(r, active_rate);
-+ if (ret)
-+ goto out;
-+
-+ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
-+ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
-+ if (ret)
-+ goto out;
-+
-+ r->rate = rate;
-+
-+out:
-+ mutex_unlock(&rpm_smd_clk_lock);
-+
-+ return ret;
-+}
-+
-+static long clk_smd_rpm_round_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long *parent_rate)
-+{
-+ /*
-+ * RPM handles rate rounding and we don't have a way to
-+ * know what the rate will be, so just return whatever
-+ * rate is requested.
-+ */
-+ return rate;
-+}
-+
-+static unsigned long clk_smd_rpm_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
-+
-+ /*
-+ * RPM handles rate rounding and we don't have a way to
-+ * know what the rate will be, so just return whatever
-+ * rate was set.
-+ */
-+ return r->rate;
-+}
-+
-+static int clk_smd_rpm_enable_scaling(struct qcom_smd_rpm *rpm)
-+{
-+ int ret;
-+ struct clk_smd_rpm_req req = {
-+ .key = cpu_to_le32(QCOM_RPM_SMD_KEY_ENABLE),
-+ .nbytes = cpu_to_le32(sizeof(u32)),
-+ .value = cpu_to_le32(1),
-+ };
-+
-+ ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_SLEEP_STATE,
-+ QCOM_SMD_RPM_MISC_CLK,
-+ QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req));
-+ if (ret) {
-+ pr_err("RPM clock scaling (sleep set) not enabled!\n");
-+ return ret;
-+ }
-+
-+ ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_ACTIVE_STATE,
-+ QCOM_SMD_RPM_MISC_CLK,
-+ QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req));
-+ if (ret) {
-+ pr_err("RPM clock scaling (active set) not enabled!\n");
-+ return ret;
-+ }
-+
-+ pr_debug("%s: RPM clock scaling is enabled\n", __func__);
-+ return 0;
-+}
-+
-+static const struct clk_ops clk_smd_rpm_ops = {
-+ .prepare = clk_smd_rpm_prepare,
-+ .unprepare = clk_smd_rpm_unprepare,
-+ .set_rate = clk_smd_rpm_set_rate,
-+ .round_rate = clk_smd_rpm_round_rate,
-+ .recalc_rate = clk_smd_rpm_recalc_rate,
-+};
-+
-+static const struct clk_ops clk_smd_rpm_branch_ops = {
-+ .prepare = clk_smd_rpm_prepare,
-+ .unprepare = clk_smd_rpm_unprepare,
-+ .round_rate = clk_smd_rpm_round_rate,
-+ .recalc_rate = clk_smd_rpm_recalc_rate,
-+};
-+
-+/* msm8916 */
-+DEFINE_CLK_SMD_RPM(msm8916, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
-+DEFINE_CLK_SMD_RPM(msm8916, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
-+DEFINE_CLK_SMD_RPM(msm8916, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
-+DEFINE_CLK_SMD_RPM_QDSS(msm8916, qdss_clk, qdss_a_clk, QCOM_SMD_RPM_MISC_CLK, 1);
-+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, bb_clk1, bb_clk1_a, 1);
-+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, bb_clk2, bb_clk2_a, 2);
-+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, rf_clk1, rf_clk1_a, 4);
-+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, rf_clk2, rf_clk2_a, 5);
-+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, bb_clk1_pin, bb_clk1_a_pin, 1);
-+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, bb_clk2_pin, bb_clk2_a_pin, 2);
-+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, rf_clk1_pin, rf_clk1_a_pin, 4);
-+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, rf_clk2_pin, rf_clk2_a_pin, 5);
-+
-+static struct clk_smd_rpm *msm8916_clks[] = {
-+ [RPM_SMD_PCNOC_CLK] = &msm8916_pcnoc_clk,
-+ [RPM_SMD_PCNOC_A_CLK] = &msm8916_pcnoc_a_clk,
-+ [RPM_SMD_SNOC_CLK] = &msm8916_snoc_clk,
-+ [RPM_SMD_SNOC_A_CLK] = &msm8916_snoc_a_clk,
-+ [RPM_SMD_BIMC_CLK] = &msm8916_bimc_clk,
-+ [RPM_SMD_BIMC_A_CLK] = &msm8916_bimc_a_clk,
-+ [RPM_SMD_QDSS_CLK] = &msm8916_qdss_clk,
-+ [RPM_SMD_QDSS_A_CLK] = &msm8916_qdss_a_clk,
-+ [RPM_SMD_BB_CLK1] = &msm8916_bb_clk1,
-+ [RPM_SMD_BB_CLK1_A] = &msm8916_bb_clk1_a,
-+ [RPM_SMD_BB_CLK2] = &msm8916_bb_clk2,
-+ [RPM_SMD_BB_CLK2_A] = &msm8916_bb_clk2_a,
-+ [RPM_SMD_RF_CLK1] = &msm8916_rf_clk1,
-+ [RPM_SMD_RF_CLK1_A] = &msm8916_rf_clk1_a,
-+ [RPM_SMD_RF_CLK2] = &msm8916_rf_clk2,
-+ [RPM_SMD_RF_CLK2_A] = &msm8916_rf_clk2_a,
-+ [RPM_SMD_BB_CLK1_PIN] = &msm8916_bb_clk1_pin,
-+ [RPM_SMD_BB_CLK1_A_PIN] = &msm8916_bb_clk1_a_pin,
-+ [RPM_SMD_BB_CLK2_PIN] = &msm8916_bb_clk2_pin,
-+ [RPM_SMD_BB_CLK2_A_PIN] = &msm8916_bb_clk2_a_pin,
-+ [RPM_SMD_RF_CLK1_PIN] = &msm8916_rf_clk1_pin,
-+ [RPM_SMD_RF_CLK1_A_PIN] = &msm8916_rf_clk1_a_pin,
-+ [RPM_SMD_RF_CLK2_PIN] = &msm8916_rf_clk2_pin,
-+ [RPM_SMD_RF_CLK2_A_PIN] = &msm8916_rf_clk2_a_pin,
-+};
-+
-+static const struct rpm_smd_clk_desc rpm_clk_msm8916 = {
-+ .clks = msm8916_clks,
-+ .num_clks = ARRAY_SIZE(msm8916_clks),
-+};
-+
-+static const struct of_device_id rpm_smd_clk_match_table[] = {
-+ { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table);
-+
-+static int rpm_smd_clk_probe(struct platform_device *pdev)
-+{
-+ struct clk_hw **hws;
-+ struct rpm_cc *rcc;
-+ struct clk_hw_onecell_data *data;
-+ int ret;
-+ size_t num_clks, i;
-+ struct qcom_smd_rpm *rpm;
-+ struct clk_smd_rpm **rpm_smd_clks;
-+ const struct rpm_smd_clk_desc *desc;
-+
-+ rpm = dev_get_drvdata(pdev->dev.parent);
-+ if (!rpm) {
-+ dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
-+ return -ENODEV;
-+ }
-+
-+ desc = of_device_get_match_data(&pdev->dev);
-+ if (!desc)
-+ return -EINVAL;
-+
-+ rpm_smd_clks = desc->clks;
-+ num_clks = desc->num_clks;
-+
-+ rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*hws) * num_clks,
-+ GFP_KERNEL);
-+ if (!rcc)
-+ return -ENOMEM;
-+
-+ hws = rcc->hws;
-+ data = &rcc->data;
-+ data->num = num_clks;
-+
-+ for (i = 0; i < num_clks; i++) {
-+ if (!rpm_smd_clks[i]) {
-+ continue;
-+ }
-+
-+ rpm_smd_clks[i]->rpm = rpm;
-+
-+ ret = clk_smd_rpm_handoff(rpm_smd_clks[i]);
-+ if (ret)
-+ goto err;
-+ }
-+
-+ ret = clk_smd_rpm_enable_scaling(rpm);
-+ if (ret)
-+ goto err;
-+
-+ for (i = 0; i < num_clks; i++) {
-+ if (!rpm_smd_clks[i]) {
-+ data->hws[i] = ERR_PTR(-ENOENT);
-+ continue;
-+ }
-+
-+ ret = devm_clk_hw_register(&pdev->dev, &rpm_smd_clks[i]->hw);
-+ if (ret)
-+ goto err;
-+ }
-+
-+ ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
-+ data);
-+ if (ret)
-+ goto err;
-+
-+ return 0;
-+err:
-+ dev_err(&pdev->dev, "Error registering SMD clock driver (%d)\n", ret);
-+ return ret;
-+}
-+
-+static int rpm_smd_clk_remove(struct platform_device *pdev)
-+{
-+ of_clk_del_provider(pdev->dev.of_node);
-+ return 0;
-+}
-+
-+static struct platform_driver rpm_smd_clk_driver = {
-+ .driver = {
-+ .name = "qcom-clk-smd-rpm",
-+ .of_match_table = rpm_smd_clk_match_table,
-+ },
-+ .probe = rpm_smd_clk_probe,
-+ .remove = rpm_smd_clk_remove,
-+};
-+
-+static int __init rpm_smd_clk_init(void)
-+{
-+ return platform_driver_register(&rpm_smd_clk_driver);
-+}
-+core_initcall(rpm_smd_clk_init);
-+
-+static void __exit rpm_smd_clk_exit(void)
-+{
-+ platform_driver_unregister(&rpm_smd_clk_driver);
-+}
-+module_exit(rpm_smd_clk_exit);
-+
-+MODULE_DESCRIPTION("Qualcomm RPM over SMD Clock Controller Driver");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:qcom-clk-smd-rpm");
---- /dev/null
-+++ b/include/dt-bindings/clock/qcom,rpmcc.h
-@@ -0,0 +1,45 @@
-+/*
-+ * Copyright 2015 Linaro Limited
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H
-+#define _DT_BINDINGS_CLK_MSM_RPMCC_H
-+
-+/* msm8916 */
-+#define RPM_SMD_XO_CLK_SRC 0
-+#define RPM_SMD_XO_A_CLK_SRC 1
-+#define RPM_SMD_PCNOC_CLK 2
-+#define RPM_SMD_PCNOC_A_CLK 3
-+#define RPM_SMD_SNOC_CLK 4
-+#define RPM_SMD_SNOC_A_CLK 5
-+#define RPM_SMD_BIMC_CLK 6
-+#define RPM_SMD_BIMC_A_CLK 7
-+#define RPM_SMD_QDSS_CLK 8
-+#define RPM_SMD_QDSS_A_CLK 9
-+#define RPM_SMD_BB_CLK1 10
-+#define RPM_SMD_BB_CLK1_A 11
-+#define RPM_SMD_BB_CLK2 12
-+#define RPM_SMD_BB_CLK2_A 13
-+#define RPM_SMD_RF_CLK1 14
-+#define RPM_SMD_RF_CLK1_A 15
-+#define RPM_SMD_RF_CLK2 16
-+#define RPM_SMD_RF_CLK2_A 17
-+#define RPM_SMD_BB_CLK1_PIN 18
-+#define RPM_SMD_BB_CLK1_A_PIN 19
-+#define RPM_SMD_BB_CLK2_PIN 20
-+#define RPM_SMD_BB_CLK2_A_PIN 21
-+#define RPM_SMD_RF_CLK1_PIN 22
-+#define RPM_SMD_RF_CLK1_A_PIN 23
-+#define RPM_SMD_RF_CLK2_PIN 24
-+#define RPM_SMD_RF_CLK2_A_PIN 25
-+
-+#endif
+++ /dev/null
-!This is the adjusted version of patch that has been submitted to upstream and that, unfortunately, provides support for RPM clocks only for apq8064 board.
-
-!TODO: make a patch that adds support for ipq806x along with apq8064 and not replaces it.
-
-From patchwork Wed Nov 2 15:56:57 2016
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v9,2/3] clk: qcom: Add support for RPM Clocks
-From: Georgi Djakov <georgi.djakov@linaro.org>
-X-Patchwork-Id: 9409425
-Message-Id: <20161102155658.32203-3-georgi.djakov@linaro.org>
-To: sboyd@codeaurora.org, mturquette@baylibre.com
-Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
- robh+dt@kernel.org, mark.rutland@arm.com,
- linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
- georgi.djakov@linaro.org
-Date: Wed, 2 Nov 2016 17:56:57 +0200
-
-This adds initial support for clocks controlled by the Resource
-Power Manager (RPM) processor on some Qualcomm SoCs, which use
-the qcom_rpm driver to communicate with RPM.
-Such platforms are ipq806x and msm8960.
-
-Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
----
- .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
- drivers/clk/qcom/Kconfig | 13 +
- drivers/clk/qcom/Makefile | 1 +
- drivers/clk/qcom/clk-rpm.c | 489 +++++++++++++++++++++
- include/dt-bindings/clock/qcom,rpmcc.h | 24 +
- 5 files changed, 528 insertions(+)
- create mode 100644 drivers/clk/qcom/clk-rpm.c
-
---
-To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at http://vger.kernel.org/majordomo-info.html
-
---- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
-+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
-@@ -11,6 +11,7 @@ Required properties :
- compatible "qcom,rpmcc" should be also included.
-
- "qcom,rpmcc-msm8916", "qcom,rpmcc"
-+ "qcom,rpmcc-ipq806x", "qcom,rpmcc"
-
- - #clock-cells : shall contain 1
-
---- a/drivers/clk/qcom/Kconfig
-+++ b/drivers/clk/qcom/Kconfig
-@@ -12,6 +12,19 @@ config COMMON_CLK_QCOM
- select REGMAP_MMIO
- select RESET_CONTROLLER
-
-+config QCOM_CLK_RPM
-+ tristate "RPM based Clock Controller"
-+ depends on COMMON_CLK_QCOM && MFD_QCOM_RPM
-+ select QCOM_RPMCC
-+ help
-+ The RPM (Resource Power Manager) is a dedicated hardware engine for
-+ managing the shared SoC resources in order to keep the lowest power
-+ profile. It communicates with other hardware subsystems via shared
-+ memory and accepts clock requests, aggregates the requests and turns
-+ the clocks on/off or scales them on demand.
-+ Say Y if you want to support the clocks exposed by the RPM on
-+ platforms such as ipq806x, msm8660, msm8960 etc.
-+
- config QCOM_CLK_SMD_RPM
- tristate "RPM over SMD based Clock Controller"
- depends on COMMON_CLK_QCOM && QCOM_SMD_RPM
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -29,3 +29,4 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8
- obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
- obj-$(CONFIG_KRAITCC) += krait-cc.o
- obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
-+obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
---- /dev/null
-+++ b/drivers/clk/qcom/clk-rpm.c
-@@ -0,0 +1,486 @@
-+/*
-+ * Copyright (c) 2016, Linaro Limited
-+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/err.h>
-+#include <linux/export.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <linux/mfd/qcom_rpm.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+
-+#include <dt-bindings/mfd/qcom-rpm.h>
-+#include <dt-bindings/clock/qcom,rpmcc.h>
-+
-+#define QCOM_RPM_MISC_CLK_TYPE 0x306b6c63
-+#define QCOM_RPM_SCALING_ENABLE_ID 0x2
-+
-+#define DEFINE_CLK_RPM(_platform, _name, _active, r_id) \
-+ static struct clk_rpm _platform##_##_active; \
-+ static struct clk_rpm _platform##_##_name = { \
-+ .rpm_clk_id = (r_id), \
-+ .peer = &_platform##_##_active, \
-+ .rate = INT_MAX, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_rpm_ops, \
-+ .name = #_name, \
-+ .parent_names = (const char *[]){ "pxo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }; \
-+ static struct clk_rpm _platform##_##_active = { \
-+ .rpm_clk_id = (r_id), \
-+ .peer = &_platform##_##_name, \
-+ .active_only = true, \
-+ .rate = INT_MAX, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_rpm_ops, \
-+ .name = #_active, \
-+ .parent_names = (const char *[]){ "pxo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }
-+
-+#define DEFINE_CLK_RPM_PXO_BRANCH(_platform, _name, _active, r_id, r) \
-+ static struct clk_rpm _platform##_##_active; \
-+ static struct clk_rpm _platform##_##_name = { \
-+ .rpm_clk_id = (r_id), \
-+ .active_only = true, \
-+ .peer = &_platform##_##_active, \
-+ .rate = (r), \
-+ .branch = true, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_rpm_branch_ops, \
-+ .name = #_name, \
-+ .parent_names = (const char *[]){ "pxo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }; \
-+ static struct clk_rpm _platform##_##_active = { \
-+ .rpm_clk_id = (r_id), \
-+ .peer = &_platform##_##_name, \
-+ .rate = (r), \
-+ .branch = true, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_rpm_branch_ops, \
-+ .name = #_active, \
-+ .parent_names = (const char *[]){ "pxo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }
-+
-+#define DEFINE_CLK_RPM_CXO_BRANCH(_platform, _name, _active, r_id, r) \
-+ static struct clk_rpm _platform##_##_active; \
-+ static struct clk_rpm _platform##_##_name = { \
-+ .rpm_clk_id = (r_id), \
-+ .peer = &_platform##_##_active, \
-+ .rate = (r), \
-+ .branch = true, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_rpm_branch_ops, \
-+ .name = #_name, \
-+ .parent_names = (const char *[]){ "cxo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }; \
-+ static struct clk_rpm _platform##_##_active = { \
-+ .rpm_clk_id = (r_id), \
-+ .active_only = true, \
-+ .peer = &_platform##_##_name, \
-+ .rate = (r), \
-+ .branch = true, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_rpm_branch_ops, \
-+ .name = #_active, \
-+ .parent_names = (const char *[]){ "cxo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }
-+
-+#define to_clk_rpm(_hw) container_of(_hw, struct clk_rpm, hw)
-+
-+struct clk_rpm {
-+ const int rpm_clk_id;
-+ const bool active_only;
-+ unsigned long rate;
-+ bool enabled;
-+ bool branch;
-+ struct clk_rpm *peer;
-+ struct clk_hw hw;
-+ struct qcom_rpm *rpm;
-+};
-+
-+struct rpm_cc {
-+ struct qcom_rpm *rpm;
-+ struct clk_hw_onecell_data data;
-+ struct clk_hw *hws[];
-+};
-+
-+struct rpm_clk_desc {
-+ struct clk_rpm **clks;
-+ size_t num_clks;
-+};
-+
-+static DEFINE_MUTEX(rpm_clk_lock);
-+
-+static int clk_rpm_handoff(struct clk_rpm *r)
-+{
-+ int ret;
-+ u32 value = INT_MAX;
-+
-+ ret = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE,
-+ r->rpm_clk_id, &value, 1);
-+ if (ret)
-+ return ret;
-+ ret = qcom_rpm_write(r->rpm, QCOM_RPM_SLEEP_STATE,
-+ r->rpm_clk_id, &value, 1);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static int clk_rpm_set_rate_active(struct clk_rpm *r, unsigned long rate)
-+{
-+ u32 value = DIV_ROUND_UP(rate, 1000); /* to kHz */
-+
-+ return qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE,
-+ r->rpm_clk_id, &value, 1);
-+}
-+
-+static int clk_rpm_set_rate_sleep(struct clk_rpm *r, unsigned long rate)
-+{
-+ u32 value = DIV_ROUND_UP(rate, 1000); /* to kHz */
-+
-+ return qcom_rpm_write(r->rpm, QCOM_RPM_SLEEP_STATE,
-+ r->rpm_clk_id, &value, 1);
-+}
-+
-+static void to_active_sleep(struct clk_rpm *r, unsigned long rate,
-+ unsigned long *active, unsigned long *sleep)
-+{
-+ *active = rate;
-+
-+ /*
-+ * Active-only clocks don't care what the rate is during sleep. So,
-+ * they vote for zero.
-+ */
-+ if (r->active_only)
-+ *sleep = 0;
-+ else
-+ *sleep = *active;
-+}
-+
-+static int clk_rpm_prepare(struct clk_hw *hw)
-+{
-+ struct clk_rpm *r = to_clk_rpm(hw);
-+ struct clk_rpm *peer = r->peer;
-+ unsigned long this_rate = 0, this_sleep_rate = 0;
-+ unsigned long peer_rate = 0, peer_sleep_rate = 0;
-+ unsigned long active_rate, sleep_rate;
-+ int ret = 0;
-+
-+ mutex_lock(&rpm_clk_lock);
-+
-+ /* Don't send requests to the RPM if the rate has not been set. */
-+ if (!r->rate)
-+ goto out;
-+
-+ to_active_sleep(r, r->rate, &this_rate, &this_sleep_rate);
-+
-+ /* Take peer clock's rate into account only if it's enabled. */
-+ if (peer->enabled)
-+ to_active_sleep(peer, peer->rate,
-+ &peer_rate, &peer_sleep_rate);
-+
-+ active_rate = max(this_rate, peer_rate);
-+
-+ if (r->branch)
-+ active_rate = !!active_rate;
-+
-+ ret = clk_rpm_set_rate_active(r, active_rate);
-+ if (ret)
-+ goto out;
-+
-+ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
-+ if (r->branch)
-+ sleep_rate = !!sleep_rate;
-+
-+ ret = clk_rpm_set_rate_sleep(r, sleep_rate);
-+ if (ret)
-+ /* Undo the active set vote and restore it */
-+ ret = clk_rpm_set_rate_active(r, peer_rate);
-+
-+out:
-+ if (!ret)
-+ r->enabled = true;
-+
-+ mutex_unlock(&rpm_clk_lock);
-+
-+ return ret;
-+}
-+
-+static void clk_rpm_unprepare(struct clk_hw *hw)
-+{
-+ struct clk_rpm *r = to_clk_rpm(hw);
-+ struct clk_rpm *peer = r->peer;
-+ unsigned long peer_rate = 0, peer_sleep_rate = 0;
-+ unsigned long active_rate, sleep_rate;
-+ int ret;
-+
-+ mutex_lock(&rpm_clk_lock);
-+
-+ if (!r->rate)
-+ goto out;
-+
-+ /* Take peer clock's rate into account only if it's enabled. */
-+ if (peer->enabled)
-+ to_active_sleep(peer, peer->rate, &peer_rate,
-+ &peer_sleep_rate);
-+
-+ active_rate = r->branch ? !!peer_rate : peer_rate;
-+ ret = clk_rpm_set_rate_active(r, active_rate);
-+ if (ret)
-+ goto out;
-+
-+ sleep_rate = r->branch ? !!peer_sleep_rate : peer_sleep_rate;
-+ ret = clk_rpm_set_rate_sleep(r, sleep_rate);
-+ if (ret)
-+ goto out;
-+
-+ r->enabled = false;
-+
-+out:
-+ mutex_unlock(&rpm_clk_lock);
-+}
-+
-+static int clk_rpm_set_rate(struct clk_hw *hw,
-+ unsigned long rate, unsigned long parent_rate)
-+{
-+ struct clk_rpm *r = to_clk_rpm(hw);
-+ struct clk_rpm *peer = r->peer;
-+ unsigned long active_rate, sleep_rate;
-+ unsigned long this_rate = 0, this_sleep_rate = 0;
-+ unsigned long peer_rate = 0, peer_sleep_rate = 0;
-+ int ret = 0;
-+
-+ mutex_lock(&rpm_clk_lock);
-+
-+ if (!r->enabled)
-+ goto out;
-+
-+ to_active_sleep(r, rate, &this_rate, &this_sleep_rate);
-+
-+ /* Take peer clock's rate into account only if it's enabled. */
-+ if (peer->enabled)
-+ to_active_sleep(peer, peer->rate,
-+ &peer_rate, &peer_sleep_rate);
-+
-+ active_rate = max(this_rate, peer_rate);
-+ ret = clk_rpm_set_rate_active(r, active_rate);
-+ if (ret)
-+ goto out;
-+
-+ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
-+ ret = clk_rpm_set_rate_sleep(r, sleep_rate);
-+ if (ret)
-+ goto out;
-+
-+ r->rate = rate;
-+
-+out:
-+ mutex_unlock(&rpm_clk_lock);
-+
-+ return ret;
-+}
-+
-+static long clk_rpm_round_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long *parent_rate)
-+{
-+ /*
-+ * RPM handles rate rounding and we don't have a way to
-+ * know what the rate will be, so just return whatever
-+ * rate is requested.
-+ */
-+ return rate;
-+}
-+
-+static unsigned long clk_rpm_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct clk_rpm *r = to_clk_rpm(hw);
-+
-+ /*
-+ * RPM handles rate rounding and we don't have a way to
-+ * know what the rate will be, so just return whatever
-+ * rate was set.
-+ */
-+ return r->rate;
-+}
-+
-+static const struct clk_ops clk_rpm_ops = {
-+ .prepare = clk_rpm_prepare,
-+ .unprepare = clk_rpm_unprepare,
-+ .set_rate = clk_rpm_set_rate,
-+ .round_rate = clk_rpm_round_rate,
-+ .recalc_rate = clk_rpm_recalc_rate,
-+};
-+
-+static const struct clk_ops clk_rpm_branch_ops = {
-+ .prepare = clk_rpm_prepare,
-+ .unprepare = clk_rpm_unprepare,
-+ .round_rate = clk_rpm_round_rate,
-+ .recalc_rate = clk_rpm_recalc_rate,
-+};
-+
-+/* ipq806x */
-+DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
-+DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
-+DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK);
-+DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK);
-+DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK);
-+DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK);
-+DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK);
-+DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
-+
-+static struct clk_rpm *ipq806x_clks[] = {
-+ [RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk,
-+ [RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk,
-+ [RPM_CFPB_CLK] = &ipq806x_cfpb_clk,
-+ [RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk,
-+ [RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk,
-+ [RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk,
-+ [RPM_EBI1_CLK] = &ipq806x_ebi1_clk,
-+ [RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk,
-+ [RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk,
-+ [RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk,
-+ [RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk,
-+ [RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk,
-+ [RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk,
-+ [RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk,
-+ [RPM_SFPB_CLK] = &ipq806x_sfpb_clk,
-+ [RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk,
-+};
-+
-+static const struct rpm_clk_desc rpm_clk_ipq806x = {
-+ .clks = ipq806x_clks,
-+ .num_clks = ARRAY_SIZE(ipq806x_clks),
-+};
-+
-+static const struct of_device_id rpm_clk_match_table[] = {
-+ { .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
-+
-+static int rpm_clk_probe(struct platform_device *pdev)
-+{
-+ struct clk_hw **hws;
-+ struct rpm_cc *rcc;
-+ struct clk_hw_onecell_data *data;
-+ int ret;
-+ size_t num_clks, i;
-+ struct qcom_rpm *rpm;
-+ struct clk_rpm **rpm_clks;
-+ const struct rpm_clk_desc *desc;
-+
-+ rpm = dev_get_drvdata(pdev->dev.parent);
-+ if (!rpm) {
-+ dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
-+ return -ENODEV;
-+ }
-+
-+ desc = of_device_get_match_data(&pdev->dev);
-+ if (!desc)
-+ return -EINVAL;
-+
-+ rpm_clks = desc->clks;
-+ num_clks = desc->num_clks;
-+
-+ rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*hws) * num_clks,
-+ GFP_KERNEL);
-+ if (!rcc)
-+ return -ENOMEM;
-+
-+ hws = rcc->hws;
-+ data = &rcc->data;
-+ data->num = num_clks;
-+
-+ for (i = 0; i < num_clks; i++) {
-+ if (!rpm_clks[i])
-+ continue;
-+
-+ rpm_clks[i]->rpm = rpm;
-+
-+ ret = clk_rpm_handoff(rpm_clks[i]);
-+ if (ret)
-+ goto err;
-+ }
-+
-+ for (i = 0; i < num_clks; i++) {
-+ if (!rpm_clks[i]) {
-+ data->hws[i] = ERR_PTR(-ENOENT);
-+ continue;
-+ }
-+
-+ ret = devm_clk_hw_register(&pdev->dev, &rpm_clks[i]->hw);
-+ if (ret)
-+ goto err;
-+ }
-+
-+ ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
-+ data);
-+ if (ret)
-+ goto err;
-+
-+ return 0;
-+err:
-+ dev_err(&pdev->dev, "Error registering RPM Clock driver (%d)\n", ret);
-+ return ret;
-+}
-+
-+static int rpm_clk_remove(struct platform_device *pdev)
-+{
-+ of_clk_del_provider(pdev->dev.of_node);
-+ return 0;
-+}
-+
-+static struct platform_driver rpm_clk_driver = {
-+ .driver = {
-+ .name = "qcom-clk-rpm",
-+ .of_match_table = rpm_clk_match_table,
-+ },
-+ .probe = rpm_clk_probe,
-+ .remove = rpm_clk_remove,
-+};
-+
-+static int __init rpm_clk_init(void)
-+{
-+ return platform_driver_register(&rpm_clk_driver);
-+}
-+core_initcall(rpm_clk_init);
-+
-+static void __exit rpm_clk_exit(void)
-+{
-+ platform_driver_unregister(&rpm_clk_driver);
-+}
-+module_exit(rpm_clk_exit);
-+
-+MODULE_DESCRIPTION("Qualcomm RPM Clock Controller Driver");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:qcom-clk-rpm");
---- a/include/dt-bindings/clock/qcom,rpmcc.h
-+++ b/include/dt-bindings/clock/qcom,rpmcc.h
-@@ -14,6 +14,28 @@
- #ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H
- #define _DT_BINDINGS_CLK_MSM_RPMCC_H
-
-+/* ipq806x */
-+#define RPM_PXO_CLK 0
-+#define RPM_PXO_A_CLK 1
-+#define RPM_CXO_CLK 2
-+#define RPM_CXO_A_CLK 3
-+#define RPM_APPS_FABRIC_CLK 4
-+#define RPM_APPS_FABRIC_A_CLK 5
-+#define RPM_CFPB_CLK 6
-+#define RPM_CFPB_A_CLK 7
-+#define RPM_DAYTONA_FABRIC_CLK 8
-+#define RPM_DAYTONA_FABRIC_A_CLK 9
-+#define RPM_EBI1_CLK 10
-+#define RPM_EBI1_A_CLK 11
-+#define RPM_NSS_FABRIC_0_CLK 12
-+#define RPM_NSS_FABRIC_0_A_CLK 13
-+#define RPM_NSS_FABRIC_1_CLK 14
-+#define RPM_NSS_FABRIC_1_A_CLK 15
-+#define RPM_SYS_FABRIC_CLK 16
-+#define RPM_SYS_FABRIC_A_CLK 17
-+#define RPM_SFPB_CLK 18
-+#define RPM_SFPB_A_CLK 19
-+
- /* msm8916 */
- #define RPM_SMD_XO_CLK_SRC 0
- #define RPM_SMD_XO_A_CLK_SRC 1
--- /dev/null
+--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
++++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+@@ -12,6 +12,7 @@ Required properties :
+
+ "qcom,rpmcc-msm8916", "qcom,rpmcc"
+ "qcom,rpmcc-apq8064", "qcom,rpmcc"
++ "qcom,rpmcc-ipq806x", "qcom,rpmcc"
+
+ - #clock-cells : shall contain 1
+
+--- a/drivers/clk/qcom/clk-rpm.c
++++ b/drivers/clk/qcom/clk-rpm.c
+@@ -359,6 +359,16 @@ DEFINE_CLK_RPM(apq8064, sfab_clk, sfab_a
+ DEFINE_CLK_RPM(apq8064, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
+ DEFINE_CLK_RPM(apq8064, qdss_clk, qdss_a_clk, QCOM_RPM_QDSS_CLK);
+
++/* ipq806x */
++DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
++DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
++DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK);
++DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK);
++DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK);
++DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
++DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK);
++DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK);
++
+ static struct clk_rpm *apq8064_clks[] = {
+ [RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk,
+ [RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk,
+@@ -380,13 +390,38 @@ static struct clk_rpm *apq8064_clks[] =
+ [RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk,
+ };
+
++static struct clk_rpm *ipq806x_clks[] = {
++ [RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk,
++ [RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk,
++ [RPM_CFPB_CLK] = &ipq806x_cfpb_clk,
++ [RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk,
++ [RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk,
++ [RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk,
++ [RPM_EBI1_CLK] = &ipq806x_ebi1_clk,
++ [RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk,
++ [RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk,
++ [RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk,
++ [RPM_SFPB_CLK] = &ipq806x_sfpb_clk,
++ [RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk,
++ [RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk,
++ [RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk,
++ [RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk,
++ [RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk,
++};
++
+ static const struct rpm_clk_desc rpm_clk_apq8064 = {
+ .clks = apq8064_clks,
+ .num_clks = ARRAY_SIZE(apq8064_clks),
+ };
+
++static const struct rpm_clk_desc rpm_clk_ipq806x = {
++ .clks = ipq806x_clks,
++ .num_clks = ARRAY_SIZE(ipq806x_clks),
++};
++
+ static const struct of_device_id rpm_clk_match_table[] = {
+ { .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
++ { .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x },
+ { }
+ };
+ MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
+--- a/include/dt-bindings/clock/qcom,rpmcc.h
++++ b/include/dt-bindings/clock/qcom,rpmcc.h
+@@ -37,6 +37,10 @@
+ #define RPM_SYS_FABRIC_A_CLK 19
+ #define RPM_SFPB_CLK 20
+ #define RPM_SFPB_A_CLK 21
++#define RPM_NSS_FABRIC_0_CLK 22
++#define RPM_NSS_FABRIC_0_A_CLK 23
++#define RPM_NSS_FABRIC_1_CLK 24
++#define RPM_NSS_FABRIC_1_A_CLK 25
+
+ /* msm8916 */
+ #define RPM_SMD_XO_CLK_SRC 0
projects / openwrt / staging / chunkeey.git / commitdiff