+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2012 Renesas Electronics Europe Ltd.
- * Copyright (C) 2012 Phil Edworthy
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu
- *
- * Based on board/renesas/rsk7264/lowlevel_init.S
- */
-#include <config.h>
-
-#include <asm/processor.h>
-#include <asm/macro.h>
-
- .global lowlevel_init
-
- .text
- .align 2
-
-lowlevel_init:
- /* Flush and enable caches (data cache in write-through mode) */
- write32 CCR1_A ,CCR1_D
-
- /* Disable WDT */
- write16 WTCSR_A, WTCSR_D
- write16 WTCNT_A, WTCNT_D
-
- /* Disable Register Bank interrupts */
- write16 IBNR_A, IBNR_D
-
- /* Set clocks based on 13.225MHz xtal */
- write16 FRQCR_A, FRQCR_D /* CPU=266MHz, I=133MHz, P=66MHz */
-
- /* Enable all peripherals */
- write8 STBCR3_A, STBCR3_D
- write8 STBCR4_A, STBCR4_D
- write8 STBCR5_A, STBCR5_D
- write8 STBCR6_A, STBCR6_D
- write8 STBCR7_A, STBCR7_D
- write8 STBCR8_A, STBCR8_D
- write8 STBCR9_A, STBCR9_D
- write8 STBCR10_A, STBCR10_D
-
- /* SCIF7 and IIC2 */
- write16 PJCR3_A, PJCR3_D /* TXD7 */
- write16 PECR1_A, PECR1_D /* RXD7, SDA2, SCL2 */
-
- /* Configure bus (CS0) */
- write16 PFCR3_A, PFCR3_D /* A24 */
- write16 PFCR2_A, PFCR2_D /* A23 and CS1# */
- write16 PBCR5_A, PBCR5_D /* A22, A21, A20 */
- write16 PCCR0_A, PCCR0_D /* DQMLL#, RD/WR# */
- write32 CS0WCR_A, CS0WCR_D
- write32 CS0BCR_A, CS0BCR_D
-
- /* Configure SDRAM (CS3) */
- write16 PCCR2_A, PCCR2_D /* CS3# */
- write16 PCCR1_A, PCCR1_D /* CKE, CAS#, RAS#, DQMLU# */
- write16 PCCR0_A, PCCR0_D /* DQMLL#, RD/WR# */
- write32 CS3BCR_A, CS3BCR_D
- write32 CS3WCR_A, CS3WCR_D
- write32 SDCR_A, SDCR_D
- write32 RTCOR_A, RTCOR_D
- write32 RTCSR_A, RTCSR_D
-
- /* Configure ethernet (CS1) */
- write16 PHCR1_A, PHCR1_D /* PINT5 on PH5 */
- write16 PHCR0_A, PHCR0_D
- write16 PFCR2_A, PFCR2_D /* CS1# */
- write32 CS1BCR_A, CS1BCR_D /* Big endian */
- write32 CS1WCR_A, CS1WCR_D /* 1 cycle */
- write16 PJDR1_A, PJDR1_D /* FIFO-SEL = 1 */
- write16 PJIOR1_A, PJIOR1_D
-
- /* wait 200us */
- mov.l REPEAT_D, r3
- mov #0, r2
-repeat0:
- add #1, r2
- cmp/hs r3, r2
- bf repeat0
- nop
-
- mov.l SDRAM_MODE, r1
- mov #0, r0
- mov.l r0, @r1
-
- nop
- rts
-
- .align 4
-
-CCR1_A: .long CCR1
-CCR1_D: .long 0x0000090B
-
-STBCR3_A: .long 0xFFFE0408
-STBCR4_A: .long 0xFFFE040C
-STBCR5_A: .long 0xFFFE0410
-STBCR6_A: .long 0xFFFE0414
-STBCR7_A: .long 0xFFFE0418
-STBCR8_A: .long 0xFFFE041C
-STBCR9_A: .long 0xFFFE0440
-STBCR10_A: .long 0xFFFE0444
-STBCR3_D: .long 0x0000001A
-STBCR4_D: .long 0x00000000
-STBCR5_D: .long 0x00000000
-STBCR6_D: .long 0x00000000
-STBCR7_D: .long 0x00000012
-STBCR8_D: .long 0x00000009
-STBCR9_D: .long 0x00000000
-STBCR10_D: .long 0x00000010
-
-WTCSR_A: .long 0xFFFE0000
-WTCNT_A: .long 0xFFFE0002
-WTCSR_D: .word 0xA518
-WTCNT_D: .word 0x5A00
-
-IBNR_A: .long 0xFFFE080E
-IBNR_D: .word 0x0000
-.align 2
-FRQCR_A: .long 0xFFFE0010
-FRQCR_D: .word 0x0015
-.align 2
-
-PJCR3_A: .long 0xFFFE3908
-PJCR3_D: .word 0x5000
-.align 2
-PECR1_A: .long 0xFFFE388C
-PECR1_D: .word 0x2011
-.align 2
-
-PFCR3_A: .long 0xFFFE38A8
-PFCR2_A: .long 0xFFFE38AA
-PBCR5_A: .long 0xFFFE3824
-PFCR3_D: .word 0x0010
-PFCR2_D: .word 0x0101
-PBCR5_D: .word 0x0111
-.align 2
-CS0WCR_A: .long 0xFFFC0028
-CS0WCR_D: .long 0x00000341
-CS0BCR_A: .long 0xFFFC0004
-CS0BCR_D: .long 0x00000400
-
-PCCR2_A: .long 0xFFFE384A
-PCCR1_A: .long 0xFFFE384C
-PCCR0_A: .long 0xFFFE384E
-PCCR2_D: .word 0x0001
-PCCR1_D: .word 0x1111
-PCCR0_D: .word 0x1111
-.align 2
-CS3BCR_A: .long 0xFFFC0010
-CS3BCR_D: .long 0x00004400
-CS3WCR_A: .long 0xFFFC0034
-CS3WCR_D: .long 0x00004912
-SDCR_A: .long 0xFFFC004C
-SDCR_D: .long 0x00000811
-RTCOR_A: .long 0xFFFC0058
-RTCOR_D: .long 0xA55A0035
-RTCSR_A: .long 0xFFFC0050
-RTCSR_D: .long 0xA55A0010
-.align 2
-SDRAM_MODE: .long 0xFFFC5460
-REPEAT_D: .long 0x000033F1
-
-PHCR1_A: .long 0xFFFE38EC
-PHCR0_A: .long 0xFFFE38EE
-PHCR1_D: .word 0x2222
-PHCR0_D: .word 0x2222
-.align 2
-CS1BCR_A: .long 0xFFFC0008
-CS1BCR_D: .long 0x00000400
-CS1WCR_A: .long 0xFFFC002C
-CS1WCR_D: .long 0x00000080
-PJDR1_A: .long 0xFFFE3914
-PJDR1_D: .word 0x0000
-.align 2
-PJIOR1_A: .long 0xFFFE3910
-PJIOR1_D: .word 0x8000
-.align 2
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012 Renesas Electronics Europe Ltd.
- * Copyright (C) 2012 Phil Edworthy
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu
- *
- * Based on u-boot/board/rsk7264/rsk7264.c
- */
-
-#include <common.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-int checkboard(void)
-{
- puts("BOARD: Renesas RSK7269\n");
- return 0;
-}
-
-int board_init(void)
-{
- return 0;
-}
-
-void led_set_state(unsigned short value)
-{
-}
-
-/*
- * The RSK board has the SMSC89218 wired up 'incorrectly'.
- * Byte-swapping is necessary, and so poor performance is inevitable.
- * This problem cannot evade by the swap function of CHIP, this can
- * evade by software Byte-swapping.
- * And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
- * functions necessary to solve this problem.
- */
-u32 pkt_data_pull(struct eth_device *dev, u32 addr)
-{
- volatile u16 *addr_16 = (u16 *)(dev->iobase + addr);
- return (u32)((swab16(*addr_16) << 16) & 0xFFFF0000)\
- | swab16(*(addr_16 + 1));
-}
-
-void pkt_data_push(struct eth_device *dev, u32 addr, u32 val)
-{
- addr += dev->iobase;
- *(volatile u16 *)(addr + 2) = swab16((u16)val);
- *(volatile u16 *)(addr) = swab16((u16)(val >> 16));
-}
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC911X
- rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
- return rc;
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Renesas RSK2+SH7269 board
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd.
- * Copyright (C) 2012 Phil Edworthy
- */
-
-#ifndef __RSK7269_H
-#define __RSK7269_H
-
-#define CONFIG_CPU_SH7269 1
-
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
-
-#define CONFIG_SYS_PBSIZE 256 /* Print Buffer Size */
-
-/* Serial */
-#define CONFIG_CONS_SCIF7
-
-/* Memory */
-/* u-boot relocated to top 256KB of ram */
-#define CONFIG_SYS_SDRAM_BASE 0x0C000000
-#define CONFIG_SYS_SDRAM_SIZE (32 * 1024 * 1024)
-
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000)
-#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
-#define CONFIG_SYS_MONITOR_LEN (128 * 1024)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4*1024*1024)
-
-/* NOR Flash */
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_SYS_FLASH_BASE 0x20000000 /* Non-cached */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 512
-
-#define CONFIG_ENV_OFFSET (128 * 1024)
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-
-/* Board Clock */
-#define CONFIG_SYS_CLK_FREQ 66125000
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */
-#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
-
-#endif /* __RSK7269_H */
projects / project / bcm63xx / u-boot.git / commitdiff