# WBD111: mach id 1690 (0x69a)
echo -en "\x06\x1c\xa0\xe3\x9a\x10\x81\xe3" > $(KDIR)/$(IMG_PREFIX)-wbd111-zImage
cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/$(IMG_PREFIX)-wbd111-zImage
+# WBD222: mach id 2753 (0xAC1)
+ echo -en "\x0a\x1c\xa0\xe3\xc1\x10\x81\xe3" > $(KDIR)/$(IMG_PREFIX)-wbd222-zImage
+ cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/$(IMG_PREFIX)-wbd222-zImage
endef
define Image/BuildKernel
# workaround the bootloader's bug with extra nops
echo -en "\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1" > $(BIN_DIR)/$(IMG_PREFIX)-wbd111-zImage
cat $(KDIR)/$(IMG_PREFIX)-wbd111-zImage >> $(BIN_DIR)/$(IMG_PREFIX)-wbd111-zImage
+ echo -en "\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1" > $(BIN_DIR)/$(IMG_PREFIX)-wbd222-zImage
+ cat $(KDIR)/$(IMG_PREFIX)-wbd222-zImage >> $(BIN_DIR)/$(IMG_PREFIX)-wbd222-zImage
endef
define Image/Build/jffs2-64k
-o $(BIN_DIR)/$(IMG_PREFIX)-wbd111-$(1).bin \
-p Kernel:0x020000:0x100000:0:0:$(BIN_DIR)/$(IMG_PREFIX)-wbd111-zImage \
-p Ramdisk:0x120000:0x500000:0:0:$(BIN_DIR)/$(IMG_PREFIX)-$(1).img
+
+ -$(STAGING_DIR_HOST)/bin/mkfwimage2 \
+ -m GEOS -f 0x30000000 -z \
+ -v WILI-S.WBD222.v5.00.SL3512.OpenWrt.00000.000000.000000 \
+ -o $(BIN_DIR)/$(IMG_PREFIX)-wbd222-$(1).bin \
+ -p Kernel:0x020000:0x100000:0:0:$(BIN_DIR)/$(IMG_PREFIX)-wbd222-zImage \
+ -p Ramdisk:0x120000:0x500000:0:0:$(BIN_DIR)/$(IMG_PREFIX)-$(1).img
endef
$(eval $(call BuildImage))
--- /dev/null
+--- a/arch/arm/mach-gemini/Kconfig
++++ b/arch/arm/mach-gemini/Kconfig
+@@ -23,6 +23,13 @@ config MACH_WBD111
+ Say Y here if you intend to run this kernel on a
+ Wiliboard WBD-111.
+
++config MACH_WBD222
++ bool "Wiliboard WBD-222"
++ select GEMINI_MEM_SWAP
++ help
++ Say Y here if you intend to run this kernel on a
++ Wiliboard WBD-222.
++
+ endmenu
+
+ config GEMINI_MEM_SWAP
+--- a/arch/arm/mach-gemini/Makefile
++++ b/arch/arm/mach-gemini/Makefile
+@@ -12,3 +12,4 @@ obj-$(CONFIG_PCI) += pci.o
+ obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
+ obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o
+ obj-$(CONFIG_MACH_WBD111) += board-wbd111.o
++obj-$(CONFIG_MACH_WBD222) += board-wbd222.o
+--- /dev/null
++++ b/arch/arm/mach-gemini/board-wbd222.c
+@@ -0,0 +1,170 @@
++/*
++ * Support for Wiliboard WBD-222
++ *
++ * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/input.h>
++#include <linux/skbuff.h>
++#include <linux/gpio_keys.h>
++#include <linux/mdio-gpio.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/time.h>
++
++#include <mach/gmac.h>
++
++#include "common.h"
++
++static struct mdio_gpio_platform_data wbd222_mdio = {
++ .mdc = 22,
++ .mdio = 21,
++ .phy_mask = ~((1 << 1) | (1 << 3)),
++};
++
++static struct platform_device wbd222_phy_device = {
++ .name = "mdio-gpio",
++ .id = 0,
++ .dev = {
++ .platform_data = &wbd222_mdio,
++ },
++};
++
++static struct gemini_gmac_platform_data gmac_data = {
++ .bus_id[0] = "0:01",
++ .interface[0] = PHY_INTERFACE_MODE_MII,
++ .bus_id[1] = "0:03",
++ .interface[1] = PHY_INTERFACE_MODE_MII,
++};
++
++static struct gpio_keys_button wbd222_keys[] = {
++ {
++ .code = KEY_SETUP,
++ .gpio = 5,
++ .active_low = 1,
++ .desc = "reset",
++ .type = EV_KEY,
++ },
++};
++
++static struct gpio_keys_platform_data wbd222_keys_data = {
++ .buttons = wbd222_keys,
++ .nbuttons = ARRAY_SIZE(wbd222_keys),
++};
++
++static struct platform_device wbd222_keys_device = {
++ .name = "gpio-keys",
++ .id = -1,
++ .dev = {
++ .platform_data = &wbd222_keys_data,
++ },
++};
++
++static struct gpio_led wbd222_leds[] = {
++ {
++ .name = "L3red",
++ .gpio = 1,
++ },
++ {
++ .name = "L4green",
++ .gpio = 2,
++ },
++ {
++ .name = "L4red",
++ .gpio = 3,
++ },
++ {
++ .name = "L3green",
++ .gpio = 5,
++ },
++};
++
++static struct gpio_led_platform_data wbd222_leds_data = {
++ .num_leds = ARRAY_SIZE(wbd222_leds),
++ .leds = wbd222_leds,
++};
++
++static struct platform_device wbd222_leds_device = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &wbd222_leds_data,
++ },
++};
++
++static struct sys_timer wbd222_timer = {
++ .init = gemini_timer_init,
++};
++
++#ifdef CONFIG_MTD_PARTITIONS
++static struct mtd_partition wbd222_partitions[] = {
++ {
++ .name = "RedBoot",
++ .offset = 0,
++ .size = 0x020000,
++ .mask_flags = MTD_WRITEABLE,
++ } , {
++ .name = "kernel",
++ .offset = 0x020000,
++ .size = 0x100000,
++ } , {
++ .name = "rootfs",
++ .offset = 0x120000,
++ .size = 0x6a0000,
++ } , {
++ .name = "VCTL",
++ .offset = 0x7c0000,
++ .size = 0x010000,
++ .mask_flags = MTD_WRITEABLE,
++ } , {
++ .name = "cfg",
++ .offset = 0x7d0000,
++ .size = 0x010000,
++ .mask_flags = MTD_WRITEABLE,
++ } , {
++ .name = "FIS",
++ .offset = 0x7e0000,
++ .size = 0x010000,
++ .mask_flags = MTD_WRITEABLE,
++ }
++};
++#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions)
++#else
++#define wbd222_partitions NULL
++#define wbd222_num_partitions 0
++#endif /* CONFIG_MTD_PARTITIONS */
++
++static void __init wbd222_init(void)
++{
++ gemini_gpio_init();
++ platform_register_uart();
++ platform_register_watchdog();
++ platform_register_pflash(SZ_8M, wbd222_partitions,
++ wbd222_num_partitions);
++ platform_device_register(&wbd222_leds_device);
++ platform_device_register(&wbd222_keys_device);
++ platform_device_register(&wbd222_phy_device);
++ platform_register_ethernet(&gmac_data);
++ platform_register_usb(0);
++ platform_register_usb(1);
++}
++
++MACHINE_START(WBD222, "Wiliboard WBD-222")
++ .phys_io = 0x7fffc000,
++ .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
++ .boot_params = 0x100,
++ .map_io = gemini_map_io,
++ .init_irq = gemini_init_irq,
++ .timer = &wbd222_timer,
++ .init_machine = wbd222_init,
++MACHINE_END
+--- a/arch/arm/tools/mach-types
++++ b/arch/arm/tools/mach-types
+@@ -2536,3 +2536,4 @@ c3ax03 MACH_C3AX03 C3AX03 2549
+ mxt_td60 MACH_MXT_TD60 MXT_TD60 2550
+ esyx MACH_ESYX ESYX 2551
+ bulldog MACH_BULLDOG BULLDOG 2553
++wbd222 MACH_WBD222 WBD222 2753
projects / openwrt / staging / kaloz.git / commitdiff