skd: Remove unnecessary blank lines

This patch does not change any functionality but makes the skd
driver source code more uniform with that of other kernel drivers.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

diff --git a/drivers/block/skd_main.c b/drivers/block/skd_main.c
index 74489da762a1be820fe4e02de6544060d7595ebc..aa6bfd1391da6957d0d9b00e859393c0444f7953 100644 (file)
--- a/drivers/block/skd_main.c
+++ b/drivers/block/skd_main.c
@@ -333,7 +333,6 @@ struct skd_device {
 
        u32 timo_slot;
 
-
        struct work_struct completion_worker;
 };
 
@@ -694,7 +693,6 @@ static void skd_request_fn(struct request_queue *q)
                if (flush == SKD_FLUSH_ZERO_SIZE_FIRST) {
                        skd_prep_zerosize_flush_cdb(scsi_req, skreq);
                        SKD_ASSERT(skreq->flush_cmd == 1);
-
                } else {
                        skd_prep_rw_cdb(scsi_req, data_dir, lba, count);
                }
@@ -2004,16 +2002,14 @@ static void skd_complete_internal(struct skd_device *skdev,
                                skd_send_internal_skspcl(skdev, skspcl,
                                                         READ_CAPACITY);
                        else {
-                               pr_err(
-                                      "(%s):*** W/R Buffer mismatch %d ***\n",
+                               pr_err("(%s):*** W/R Buffer mismatch %d ***\n",
                                       skd_name(skdev), skdev->connect_retries);
                                if (skdev->connect_retries <
                                    SKD_MAX_CONNECT_RETRIES) {
                                        skdev->connect_retries++;
                                        skd_soft_reset(skdev);
                                } else {
-                                       pr_err(
-                                              "(%s): W/R Buffer Connect Error\n",
+                                       pr_err("(%s): W/R Buffer Connect Error\n",
                                               skd_name(skdev));
                                        return;
                                }
@@ -2621,7 +2617,6 @@ static void skd_process_scsi_inq(struct skd_device *skdev,
                skd_do_driver_inq(skdev, skcomp, skerr, scsi_req->cdb, buf);
 }
 
-
 static int skd_isr_completion_posted(struct skd_device *skdev,
                                        int limit, int *enqueued)
 {
@@ -3083,8 +3078,7 @@ static void skd_isr_fwstate(struct skd_device *skdev)
                        skdev->cur_max_queue_depth * 2 / 3 + 1;
                if (skdev->queue_low_water_mark < 1)
                        skdev->queue_low_water_mark = 1;
-               pr_info(
-                      "(%s): Queue depth limit=%d dev=%d lowat=%d\n",
+               pr_info("(%s): Queue depth limit=%d dev=%d lowat=%d\n",
                       skd_name(skdev),
                       skdev->cur_max_queue_depth,
                       skdev->dev_max_queue_depth, skdev->queue_low_water_mark);
@@ -4553,7 +4547,6 @@ static void skd_destruct(struct skd_device *skdev)
        if (skdev == NULL)
                return;
 
-
        pr_debug("%s:%s:%d disk\n", skdev->name, __func__, __LINE__);
        skd_free_disk(skdev);
 
@@ -4617,7 +4610,6 @@ static const struct block_device_operations skd_blockdev_ops = {
        .getgeo         = skd_bdev_getgeo,
 };
 
-
 /*
  *****************************************************************************
  * PCIe DRIVER GLUE
@@ -4716,14 +4708,12 @@ static int skd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
        pci_set_master(pdev);
        rc = pci_enable_pcie_error_reporting(pdev);
        if (rc) {
-               pr_err(
-                      "(%s): bad enable of PCIe error reporting rc=%d\n",
+               pr_err("(%s): bad enable of PCIe error reporting rc=%d\n",
                       skd_name(skdev), rc);
                skdev->pcie_error_reporting_is_enabled = 0;
        } else
                skdev->pcie_error_reporting_is_enabled = 1;
 
-
        pci_set_drvdata(pdev, skdev);
 
        for (i = 0; i < SKD_MAX_BARS; i++) {
@@ -4768,8 +4758,7 @@ static int skd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
        } else {
                /* we timed out, something is wrong with the device,
                   don't add the disk structure */
-               pr_err(
-                      "(%s): error: waiting for s1120 timed out %d!\n",
+               pr_err("(%s): error: waiting for s1120 timed out %d!\n",
                       skd_name(skdev), rc);
                /* in case of no error; we timeout with ENXIO */
                if (!rc)