Staging: rtl8187se: remove CONFIG_RTL818x_S ifdefs

CONFIG_RTL818x_S is defined in drivers/staging/rtl8187se/r8180_hw.h.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/staging/rtl8187se/Makefile b/drivers/staging/rtl8187se/Makefile
index 02f1e581d5ab0b403bc5b02ba2d78ee5975a1274..b8c8922bcdb7167beca9d7b2ddca891bf2255de2 100644 (file)
--- a/drivers/staging/rtl8187se/Makefile
+++ b/drivers/staging/rtl8187se/Makefile
@@ -5,7 +5,6 @@
 #EXTRA_CFLAGS += -O2
 #CC            = gcc
 #CFLAGS += -DCONFIG_RTL8185B
-#CFLAGS += -DCONFIG_RTL818x_S
 
 #added for EeePC testing
 EXTRA_CFLAGS += -DENABLE_IPS

diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index 6afc4ef245ae9cd25fa9a3f39ebfc2f660e884e5..6b029fe80fa1bc89864220242ee52b90501a347a 100644 (file)
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -2479,9 +2479,7 @@ void rtl8180_rx(struct net_device *dev)
                }else {
                        padding = 0;
                }
-#ifdef CONFIG_RTL818X_S
                padding = 0;
-#endif
 #endif
                priv->rx_prevlen+=len;
 
@@ -3862,13 +3860,11 @@ void watch_dog_adaptive(unsigned long data)
        }
 #endif
 
-#ifdef CONFIG_RTL818X_S
        // Tx Power Tracking on 87SE.
 #ifdef TX_TRACK
        //if( priv->bTxPowerTrack )     //lzm mod 080826
        if( CheckTxPwrTracking((struct net_device *)data));
                TxPwrTracking87SE((struct net_device *)data);
-#endif
 #endif
 
        // Perform DIG immediately.
@@ -4024,11 +4020,7 @@ short rtl8180_init(struct net_device *dev)
         */
 
 #ifdef CONFIG_RTL8185B
-#ifdef CONFIG_RTL818X_S
        priv->RegThreeWireMode = HW_THREE_WIRE_SI;
-#else
-        priv->RegThreeWireMode = SW_THREE_WIRE;
-#endif
 #endif
 
 //Add for RF power on power off by lizhaoming 080512
@@ -4269,10 +4261,6 @@ short rtl8180_init(struct net_device *dev)
                                                                        (0 ? TCR_SAT : 0);      // FALSE: HW provies PLCP length and LENGEXT, TURE: SW proiveds them
 
        priv->ReceiveConfig     =
-#ifdef CONFIG_RTL818X_S
-#else
-                                                        priv->CSMethod |
-#endif
 //                                                             RCR_ENMARP |
                                                                RCR_AMF | RCR_ADF |                             //accept management/data
                                                                RCR_ACF |                                               //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
@@ -4300,17 +4288,10 @@ short rtl8180_init(struct net_device *dev)
        switch (hw_version){
 #ifdef CONFIG_RTL8185B
                case HW_VERID_R8185B_B:
-#ifdef CONFIG_RTL818X_S
                         priv->card_8185 = VERSION_8187S_C;
                        DMESG("MAC controller is a RTL8187SE b/g");
                        priv->phy_ver = 2;
                        break;
-#else
-                       DMESG("MAC controller is a RTL8185B b/g");
-                       priv->card_8185 = 3;
-                       priv->phy_ver = 2;
-                       break;
-#endif
 #endif
                case HW_VERID_R8185_ABC:
                        DMESG("MAC controller is a RTL8185 b/g");
@@ -4350,24 +4331,9 @@ short rtl8180_init(struct net_device *dev)
        priv->card_8185_Bversion = 0;
 
 #ifdef CONFIG_RTL8185B
-#ifdef CONFIG_RTL818X_S
        // just for sync 85
        priv->card_type = PCI;
         DMESG("This is a PCI NIC");
-#else
-       config3 = read_nic_byte(dev, CONFIG3);
-       if(config3 & 0x8){
-               priv->card_type = CARDBUS;
-               DMESG("This is a CARDBUS NIC");
-       }
-       else if( config3 & 0x4){
-               priv->card_type = MINIPCI;
-               DMESG("This is a MINI-PCI NIC");
-       }else{
-               priv->card_type = PCI;
-               DMESG("This is a PCI NIC");
-       }
-#endif
 #endif
        priv->enable_gpio0 = 0;
 
@@ -4375,7 +4341,6 @@ short rtl8180_init(struct net_device *dev)
 #ifdef CONFIG_RTL8185B
        usValue = eprom_read(dev, EEPROM_SW_REVD_OFFSET);
        DMESG("usValue is 0x%x\n",usValue);
-#ifdef CONFIG_RTL818X_S
        //3Read AntennaDiversity
        // SW Antenna Diversity.
        if(     (usValue & EEPROM_SW_AD_MASK) != EEPROM_SW_AD_ENABLE )
@@ -4427,7 +4392,6 @@ short rtl8180_init(struct net_device *dev)
        }
        //printk("bDefaultAntenna1 = %d\n", priv->bDefaultAntenna1);
 #endif
-#endif
 //by amy for antenna
        /* rtl8185 can calc plcp len in HW.*/
        priv->hw_plcp_len = 1;
@@ -4537,13 +4501,9 @@ DMESG output to andreamrl@tiscali.it THANKS");
        }
 
 #ifdef CONFIG_RTL8185B
-#ifdef CONFIG_RTL818X_S
        priv->rf_chip = RF_ZEBRA4;
        priv->rf_sleep = rtl8225z4_rf_sleep;
        priv->rf_wakeup = rtl8225z4_rf_wakeup;
-#else
-        priv->rf_chip = RF_ZEBRA2;
-#endif
        //DMESG("Card reports RF frontend Realtek 8225z2");
        //DMESGW("This driver has EXPERIMENTAL support for this chipset.");
        //DMESGW("use it with care and at your own risk and");

diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c
index cdbe88ddaaf2d89fbbda93161b74cb991f36c803..a4a9a024cff140a6bccfe35026aaa3e970d9e697 100644 (file)
--- a/drivers/staging/rtl8187se/r8180_dm.c
+++ b/drivers/staging/rtl8187se/r8180_dm.c
@@ -517,7 +517,6 @@ MgntIsCckRate(
 
         return bReturn;
 }
-#ifdef CONFIG_RTL818X_S
 //
 //     Description:
 //             Tx Power tracking mechanism routine on 87SE.
@@ -1233,7 +1232,6 @@ SetInitialGain:
        priv->LastTxThroughput = TxThroughput;
        priv->ieee80211->rate = priv->CurrentOperaRate * 5;
 }
-#endif
 
 void rtl8180_rate_adapter(struct work_struct * work)
 {
@@ -1259,10 +1257,8 @@ void timer_rate_adaptive(unsigned long data)
                        (priv->ForcedDataRate == 0) )
        {
 //     DMESG("timer_rate_adaptive():schedule rate_adapter_wq\n");
-#ifdef CONFIG_RTL818X_S
                queue_work(priv->ieee80211->wq, (void *)&priv->ieee80211->rate_adapter_wq);
 //             StaRateAdaptive87SE((struct net_device *)data);
-#endif
        }
        priv->rateadapter_timer.expires = jiffies + MSECS(priv->RateAdaptivePeriod);
        add_timer(&priv->rateadapter_timer);
@@ -1320,20 +1316,12 @@ SetAntenna8185(
                case RF_ZEBRA2:
                case RF_ZEBRA4:
 #ifdef CONFIG_RTL8185B
-#ifdef CONFIG_RTL818X_S
                        // Mac register, main antenna
                        write_nic_byte(dev, ANTSEL, 0x03);
                        //base band
                        write_phy_cck(dev,0x11, 0x9b); // Config CCK RX antenna.
                        write_phy_ofdm(dev, 0x0d, 0x5c); // Config OFDM RX antenna.
 
-#else
-                       // Mac register, main antenna
-                       write_nic_byte(dev, ANTSEL, 0x03);
-                       //base band
-                       write_phy_cck(dev, 0x10, 0x9b); // Config CCK RX antenna.
-                       write_phy_ofdm(dev, 0x0d, 0x5c); // Config OFDM RX antenna.
-#endif
 #endif
 
                        bAntennaSwitched = true;
@@ -1351,19 +1339,11 @@ SetAntenna8185(
                case RF_ZEBRA2:
                case RF_ZEBRA4:
 #ifdef CONFIG_RTL8185B
-#ifdef CONFIG_RTL818X_S
                        // Mac register, aux antenna
                        write_nic_byte(dev, ANTSEL, 0x00);
                        //base band
                        write_phy_cck(dev, 0x11, 0xbb); // Config CCK RX antenna.
                        write_phy_ofdm(dev, 0x0d, 0x54); // Config OFDM RX antenna.
-#else
-                       // Mac register, aux antenna
-                       write_nic_byte(dev, ANTSEL, 0x00);
-                       //base band
-                       write_phy_cck(dev, 0x10, 0xbb); // Config CCK RX antenna.
-                       write_phy_ofdm(dev, 0x0d, 0x54); // Config OFDM RX antenna.
-#endif
 #endif
 
                        bAntennaSwitched = true;
@@ -1406,11 +1386,9 @@ SwitchAntenna(
        {
 #if 0//lzm del 080826
 //by amy 080312
-#ifdef CONFIG_RTL818X_S
                if(priv->bSwAntennaDiverity)
                        bResult = SetAntennaConfig87SE(dev, 1, true);
                else
-#endif
 #endif
                        bResult = SetAntenna8185(dev, 1);
 //by amy 080312
@@ -1421,11 +1399,9 @@ SwitchAntenna(
        {
 #if 0//lzm del 080826
 //by amy 080312
-#ifdef CONFIG_RTL818X_S
                if(priv->bSwAntennaDiverity)
                        bResult = SetAntennaConfig87SE(dev, 0, true);
                else
-#endif
 #endif
                        bResult = SetAntenna8185(dev, 0);
 //by amy 080312

diff --git a/drivers/staging/rtl8187se/r8180_hw.h b/drivers/staging/rtl8187se/r8180_hw.h
index bf38934bc09038c67fe2fad4ad43aa8ec6dc6585..9537a70a0a319047e43d7072ea3943ae2b69df82 100644 (file)
--- a/drivers/staging/rtl8187se/r8180_hw.h
+++ b/drivers/staging/rtl8187se/r8180_hw.h
@@ -21,7 +21,6 @@
 #define R8180_HW
 
 #define CONFIG_RTL8185B  //support for rtl8185B, xiong-2006-11-15
-#define CONFIG_RTL818X_S
 
 #define BIT0   0x00000001
 #define BIT1   0x00000002
@@ -300,7 +299,6 @@
 #define CONFIG3 0x0059
 #define CONFIG4 0x005A
 #ifdef CONFIG_RTL8185B
-#ifdef CONFIG_RTL818X_S
        // SD3 szuyitasi: Mac0x57= CC -> B0 Mac0x60= D1 -> C6
        // Mac0x60 = 0x000004C6 power save parameters
        #define ANAPARM_ASIC_ON    0xB0054D00
@@ -308,14 +306,6 @@
 
        #define ANAPARM_ON ANAPARM_ASIC_ON
        #define ANAPARM2_ON ANAPARM2_ASIC_ON
-#else
-       // SD3 CMLin:
-       #define ANAPARM_ASIC_ON    0x45090658
-       #define ANAPARM2_ASIC_ON  0x727f3f52
-
-       #define ANAPARM_ON ANAPARM_ASIC_ON
-       #define ANAPARM2_ON ANAPARM2_ASIC_ON
-#endif
 #endif
 
 #define TESTR 0x005B
@@ -453,9 +443,7 @@
 
 /* 0x00DA - 0x00DB - reserved */
 
-#ifdef CONFIG_RTL818X_S
 #define PHYPR                  0xDA                    //0xDA - 0x0B PHY Parameter Register.
-#endif
 
 #define CWR 0x00DC
 #define CWR_END 0x00DD
@@ -468,9 +456,7 @@
 #define RDSAR_END 0x00E7
 
 /* 0x00E8 - 0x00EF - reserved */
-#ifdef CONFIG_RTL818X_S
 #define LED_CONTROL            0xED
-#endif
 
 #define FER 0x00F0
 #define FER_END 0x00F3
@@ -827,11 +813,9 @@
 #define AC_BE_PARAM            0xF8                    // AC_BE Parameters Record
 #define AC_BK_PARAM            0xFC                    // AC_BK Parameters Record
 
-#ifdef CONFIG_RTL818X_S
 #define BcnTimingAdjust        0x16A                   // Beacon Timing Adjust Register.
 #define GPIOCtrl                       0x16B                   // GPIO Control Register.
 #define PSByGC                 0x180                   // 0x180 - 0x183 Power Saving by Gated Clock.
-#endif
 #define ARFR                   0x1E0   // Auto Rate Fallback Register (0x1e0 ~ 0x1e2)
 
 #define RFSW_CTRL                      0x272   // 0x272-0x273.
@@ -840,10 +824,8 @@
 #define SW_3W_CMD0                     0x27C   // Software 3-wire Control/Status Register.
 #define SW_3W_CMD1                     0x27D   // Software 3-wire Control/Status Register.
 
-#ifdef CONFIG_RTL818X_S
 #define PI_DATA_READ           0X360   // 0x360 - 0x361  Parallel Interface Data Register.
 #define SI_DATA_READ           0x362   // 0x362 - 0x363  Serial Interface Data Register.
-#endif
 
 //----------------------------------------------------------------------------
 //       8185B TPPoll bits                             (offset 0xd9, 1 byte)

diff --git a/drivers/staging/rtl8187se/r8180_rtl8225.c b/drivers/staging/rtl8187se/r8180_rtl8225.c
index 96ed029ed64a3a2a106cadbb470d01a247064d4b..ec0d41bb13061a1953786dec29729d3bdea6a7ff 100644 (file)
--- a/drivers/staging/rtl8187se/r8180_rtl8225.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8225.c
@@ -38,7 +38,6 @@ u8 rtl8225_init_gain[]={
        0x93,0x38,0x5a,0xc5,//0x00,0x31,0x06,0x99,//Gain = 6 ~ -54dbm
 };
 #endif
-#ifdef CONFIG_RTL818X_S
 u32 rtl8225_chan[] ={
               0,
                0x0080, //ch1
@@ -56,26 +55,6 @@ u32 rtl8225_chan[] ={
                0x0680,
                0x074A, //ch14
 };
-#else
-u32 rtl8225_chan[] = {
-       0,      //dummy channel 0
-       0x085c, //1
-       0x08dc, //2
-       0x095c, //3
-       0x09dc, //4
-       0x0a5c, //5
-       0x0adc, //6
-       0x0b5c, //7
-       0x0bdc, //8
-       0x0c5c, //9
-       0x0cdc, //10
-       0x0d5c, //11
-       0x0ddc, //12
-       0x0e5c, //13
-       //0x0f5c, //14
-       0x0f72, // 14
-};
-#endif
 
 u16 rtl8225bcd_rxgain[]={
        0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,

diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
index 514ebdf32dd2ecf8594344a155492e3c3fe82ad6..10978eafdb76262b60b3dbaaaee1459c9b3ba7fa 100644 (file)
--- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
@@ -445,7 +445,6 @@ DbmToTxPwrIdx(
        bool bUseDefault = true;
        s8 TxPwrIdx = 0;
 
-#ifdef CONFIG_RTL818X_S
        //
        // 071011, SD3 SY:
        // OFDM Power in dBm = Index * 0.5 + 0
@@ -480,7 +479,6 @@ DbmToTxPwrIdx(
                                TxPwrIdx = (s8)tmp;
                }
        }
-#endif
 
        //
        // TRUE if we want to use a default implementation.
@@ -577,7 +575,6 @@ void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch)
        min_ofdm_power_level = 10;
 
 #ifdef CONFIG_RTL8185B
-#ifdef CONFIG_RTL818X_S
 
        if(cck_power_level > 35)
        {
@@ -590,36 +587,6 @@ void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch)
        //printk("CCK TX power is %x\n", (ZEBRA2_CCK_OFDM_GAIN_SETTING[cck_power_level]));
        force_pci_posting(dev);
        mdelay(1);
-#else
-
-       /* CCK power setting */
-       if(cck_power_level > max_cck_power_level)
-               cck_power_level = max_cck_power_level;
-
-       cck_power_level += priv->cck_txpwr_base;
-
-       if(cck_power_level > 35)
-               cck_power_level = 35;
-
-       if(ch == 14)
-               cck_power_table = rtl8225z2_tx_power_cck_ch14;
-       else
-               cck_power_table = rtl8225z2_tx_power_cck;
-
-
-       for(i=0;i<8;i++){
-
-               power = cck_power_table[i];
-               write_phy_cck(dev, 0x44 + i, power);
-       }
-
-       //write_nic_byte(dev, TX_GAIN_CCK, power);
-       //2005.11.17,
-       write_nic_byte(dev, CCK_TXAGC, ZEBRA2_CCK_OFDM_GAIN_SETTING[(u8)cck_power_level]);
-
-       force_pci_posting(dev);
-       mdelay(1);
-#endif
 #endif
        /* OFDM power setting */
 //  Old:
@@ -652,11 +619,7 @@ void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch)
 
        //write_nic_byte(dev, TX_GAIN_OFDM, ofdm_power_level);
        //2005.11.17,
-#ifdef CONFIG_RTL818X_S
         write_nic_byte(dev, OFDM_TXAGC, ZEBRA2_CCK_OFDM_GAIN_SETTING[(u8)ofdm_power_level]);
-#else
-        write_nic_byte(dev, OFDM_TXAGC, ZEBRA2_CCK_OFDM_GAIN_SETTING[(u8)ofdm_power_level]*2);
-#endif
         if(ofdm_power_level<=11)
         {
 //            write_nic_dword(dev,PHY_ADR,0x00005c87);
@@ -1137,11 +1100,7 @@ void rtl8225z2_rf_init(struct net_device *dev)
 //     //}
 
        rtl8225z2_SetTXPowerLevel(dev, channel);
-#ifdef CONFIG_RTL818X_S
         write_phy_cck(dev, 0x11, 0x9b); mdelay(1); /* Rx ant A, 0xdb for B */
-#else
-       write_phy_cck(dev, 0x10, 0x9b); mdelay(1); /* Rx ant A, 0xdb for B */
-#endif
        write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); /* Rx ant A, 0x10 for B */
 
        rtl8185_tx_antenna(dev, 0x3); /* TX ant A, 0x0 for B */

diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index 9647bc358ad661d43d8629ed4d011ef949f866bd..de111850b45d44b7331b0ccf092dff75821f6a76 100644 (file)
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -39,7 +39,6 @@ Notes:
 //#define CONFIG_RTL8180_IO_MAP
 
 #define TC_3W_POLL_MAX_TRY_CNT 5
-#ifdef CONFIG_RTL818X_S
 static u8 MAC_REG_TABLE[][2]={
                         //PAGA 0:
                         // 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in HwConfigureRTL8185()
@@ -120,97 +119,6 @@ static u8 OFDM_CONFIG[]={
                        0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e,
                        0xD8, 0x3C, 0x7B, 0x10, 0x10
                };
-#else
- static u8 MAC_REG_TABLE[][2]={
-                       //PAGA 0:
-                       {0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00}, {0xf3, 0x00}, {0xf4, 0x32},
-                       {0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00}, {0xf8, 0x46}, {0xf9, 0xa4},
-                       {0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00},
-                       {0xff, 0x00},
-
-                       //PAGE 1:
-                       {0x5e, 0x01},
-                       {0x58, 0x4b}, {0x59, 0x00}, {0x5a, 0x4b}, {0x5b, 0x00}, {0x60, 0x4b},
-                       {0x61, 0x09}, {0x62, 0x4b}, {0x63, 0x09}, {0xce, 0x0f}, {0xcf, 0x00},
-                       {0xe0, 0xff}, {0xe1, 0x0f}, {0xe2, 0x00}, {0xf0, 0x4e}, {0xf1, 0x01},
-                       {0xf2, 0x02}, {0xf3, 0x03}, {0xf4, 0x04}, {0xf5, 0x05}, {0xf6, 0x06},
-                       {0xf7, 0x07}, {0xf8, 0x08},
-
-
-                       //PAGE 2:
-                       {0x5e, 0x02},
-                       {0x0c, 0x04}, {0x21, 0x61}, {0x22, 0x68}, {0x23, 0x6f}, {0x24, 0x76},
-                       {0x25, 0x7d}, {0x26, 0x84}, {0x27, 0x8d}, {0x4d, 0x08}, {0x4e, 0x00},
-                       {0x50, 0x05}, {0x51, 0xf5}, {0x52, 0x04}, {0x53, 0xa0}, {0x54, 0x1f},
-                       {0x55, 0x23}, {0x56, 0x45}, {0x57, 0x67}, {0x58, 0x08}, {0x59, 0x08},
-                       {0x5a, 0x08}, {0x5b, 0x08}, {0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08},
-                       {0x63, 0x08}, {0x64, 0xcf}, {0x72, 0x56}, {0x73, 0x9a},
-
-                       //PAGA 0:
-                       {0x5e, 0x00},
-                       {0x34, 0xff}, {0x35, 0x0f}, {0x5b, 0x40}, {0x84, 0x88}, {0x85, 0x24},
-                       {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x07}, {0x8d, 0x00}, {0x94, 0x1b},
-                       {0x95, 0x12}, {0x96, 0x00}, {0x97, 0x06}, {0x9d, 0x1a}, {0x9f, 0x10},
-                       {0xb4, 0x22}, {0xbe, 0x80}, {0xdb, 0x00}, {0xee, 0x00}, {0x5b, 0x42},
-                       {0x91, 0x03},
-
-                       //PAGE 2:
-                       {0x5e, 0x02},
-                       {0x4c, 0x03},
-
-                       //PAGE 0:
-                       {0x5e, 0x00},
-
-                       //PAGE 3:
-                       {0x5e, 0x03},
-                       {0x9f, 0x00},
-
-                       //PAGE 0:
-                       {0x5e, 0x00},
-                       {0x8c, 0x01}, {0x8d, 0x10},{0x8e, 0x08}, {0x8f, 0x00}
-               };
-
-
-static u8  ZEBRA_AGC[]={
-       0,
-       0x5e,0x5e,0x5e,0x5e,0x5d,0x5b,0x59,0x57,0x55,0x53,0x51,0x4f,0x4d,0x4b,0x49,0x47,
-       0x45,0x43,0x41,0x3f,0x3d,0x3b,0x39,0x37,0x35,0x33,0x31,0x2f,0x2d,0x2b,0x29,0x27,
-       0x25,0x23,0x21,0x1f,0x1d,0x1b,0x19,0x17,0x15,0x13,0x11,0x0f,0x0d,0x0b,0x09,0x07,
-       0x05,0x03,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
-       0x19,0x19,0x19,0x019,0x19,0x19,0x19,0x19,0x19,0x19,0x1e,0x1f,0x20,0x21,0x21,0x22,
-       0x23,0x24,0x24,0x25,0x25,0x26,0x26,0x27,0x27,0x28,0x28,0x28,0x29,0x2a,0x2a,0x2b,
-       0x2b,0x2b,0x2c,0x2c,0x2c,0x2d,0x2d,0x2d,0x2e,0x2e,0x2f,0x30,0x31,0x31,0x31,0x31,
-       0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31
-       };
-
-static u32 ZEBRA_RF_RX_GAIN_TABLE[]={
-       0,
-       0x0400,0x0401,0x0402,0x0403,0x0404,0x0405,0x0408,0x0409,
-       0x040a,0x040b,0x0502,0x0503,0x0504,0x0505,0x0540,0x0541,
-       0x0542,0x0543,0x0544,0x0545,0x0580,0x0581,0x0582,0x0583,
-       0x0584,0x0585,0x0588,0x0589,0x058a,0x058b,0x0643,0x0644,
-       0x0645,0x0680,0x0681,0x0682,0x0683,0x0684,0x0685,0x0688,
-       0x0689,0x068a,0x068b,0x068c,0x0742,0x0743,0x0744,0x0745,
-       0x0780,0x0781,0x0782,0x0783,0x0784,0x0785,0x0788,0x0789,
-       0x078a,0x078b,0x078c,0x078d,0x0790,0x0791,0x0792,0x0793,
-       0x0794,0x0795,0x0798,0x0799,0x079a,0x079b,0x079c,0x079d,
-       0x07a0,0x07a1,0x07a2,0x07a3,0x07a4,0x07a5,0x07a8,0x07a9,
-       0x03aa,0x03ab,0x03ac,0x03ad,0x03b0,0x03b1,0x03b2,0x03b3,
-       0x03b4,0x03b5,0x03b8,0x03b9,0x03ba,0x03bb,0x03bb
-};
-
-// 2006.07.13, SD3 szuyitasi:
-//     OFDM.0x03=0x0C (original is 0x0F)
-// Use the new SD3 given param, by shien chang, 2006.07.14
-static u8 OFDM_CONFIG[]={
-       0x10, 0x0d, 0x01, 0x0C, 0x14, 0xfb, 0x0f, 0x60, 0x00, 0x60,
-       0x00, 0x00, 0x00, 0x5c, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00,
-       0x00, 0x00, 0xa8, 0x46, 0xb2, 0x33, 0x07, 0xa5, 0x6f, 0x55,
-       0xc8, 0xb3, 0x0a, 0xe1, 0x1c, 0x8a, 0xb6, 0x83, 0x34, 0x0f,
-       0x4f, 0x23, 0x6f, 0xc2, 0x6b, 0x40, 0x80, 0x00, 0xc0, 0xc1,
-       0x58, 0xf1, 0x00, 0xe4, 0x90, 0x3e, 0x6d, 0x3c, 0xff, 0x07
-};
-#endif
 
 /*---------------------------------------------------------------
   * Hardware IO
@@ -538,12 +446,10 @@ ZEBRA_RFSerialWrite(
        u16                             UshortBuffer;
 
        u8                      u1bTmp;
-#ifdef CONFIG_RTL818X_S
        // RTL8187S HSSI Read/Write Function
        u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
        u1bTmp |=   RF_SW_CFG_SI;   //reg08[1]=1 Serial Interface(SI)
        write_nic_byte(dev, RF_SW_CONFIG, u1bTmp);
-#endif
        UshortBuffer = read_nic_word(dev, RFPinsOutput);
        oval = UshortBuffer & 0xfff8; // We shall clear bit0, 1, 2 first, 2005.10.28, by rcnjko.
 
@@ -914,7 +820,6 @@ RF_WriteReg(
                                        1);                                     // bWrite
                        }
                        break;
-  #ifdef CONFIG_RTL818X_S
                        case HW_THREE_WIRE_PI: //Parallel Interface
                        { // Pure HW 3-wire.
                                data2Write = (data << 4) | (u32)(offset & 0x0f);
@@ -948,7 +853,6 @@ RF_WriteReg(
 //                                 printk(" exit ZEBRA_RFSerialWrite\n ");
                        }
                        break;
-  #endif
 
 
                default:
@@ -981,13 +885,11 @@ ZEBRA_RFSerialRead(
        u8                      u1bTmp;
        ThreeWireReg    tdata;
        //PHAL_DATA_8187        pHalData = GetHalData8187(pAdapter);
-#ifdef CONFIG_RTL818X_S
        { // RTL8187S HSSI Read/Write Function
                u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
                u1bTmp |=   RF_SW_CFG_SI;   //reg08[1]=1 Serial Interface(SI)
                write_nic_byte(dev, RF_SW_CONFIG, u1bTmp);
        }
-#endif
 
        wReg80 = oval = read_nic_word(dev, RFPinsOutput);
        oval2 = read_nic_word(dev, RFPinsEnable);
@@ -1111,7 +1013,6 @@ RF_ReadReg(
        case RF_ZEBRA4:
                switch(priv->RegThreeWireMode)
                {
-#ifdef CONFIG_RTL818X_S
                        case HW_THREE_WIRE_PI: // For 87S  Parallel Interface.
                        {
                                data2Write = ((u32)(offset&0x0f));
@@ -1141,7 +1042,6 @@ RF_ReadReg(
                        }
                        break;
 
-#endif
                        // Perform SW 3-wire programming by driver.
                        default:
                        {
@@ -1200,7 +1100,6 @@ ReadBBPortUchar(
        return RegisterContent;
 }
 //{by amy 080312
-#ifdef CONFIG_RTL818X_S
 //
 //     Description:
 //             Perform Antenna settings with antenna diversity on 87SE.
@@ -1282,7 +1181,6 @@ SetAntennaConfig87SE(
        priv->CurrAntennaIndex = DefaultAnt; // Update default settings.
        return  bAntennaSwitched;
 }
-#endif
 //by amy 080312
 /*---------------------------------------------------------------
   * Hardware Initialization.
@@ -1301,7 +1199,6 @@ ZEBRA_Config_85BASIC_HardCode(
        u32     u4bRegOffset, u4bRegValue, u4bRF23, u4bRF24;
        u8                      u1b24E;
 
-#ifdef CONFIG_RTL818X_S
 
        //=============================================================================
        // 87S_PCIE :: RADIOCFG.TXT
@@ -1509,72 +1406,6 @@ ZEBRA_Config_85BASIC_HardCode(
        write_nic_byte(dev, CCK_TXAGC, 0x10);
        write_nic_byte(dev, OFDM_TXAGC, 0x1B);
        write_nic_byte(dev, ANTSEL, 0x03);
-#else
-       //=============================================================================
-       // RADIOCFG.TXT
-       //=============================================================================
-
-       RF_WriteReg(dev, 0x00, 0x00b7);                 mdelay(1);
-       RF_WriteReg(dev, 0x01, 0x0ee0);                 mdelay(1);
-       RF_WriteReg(dev, 0x02, 0x044d);                 mdelay(1);
-       RF_WriteReg(dev, 0x03, 0x0441);                 mdelay(1);
-       RF_WriteReg(dev, 0x04, 0x08c3);                 mdelay(1);
-       RF_WriteReg(dev, 0x05, 0x0c72);                 mdelay(1);
-       RF_WriteReg(dev, 0x06, 0x00e6);                 mdelay(1);
-       RF_WriteReg(dev, 0x07, 0x082a);                 mdelay(1);
-       RF_WriteReg(dev, 0x08, 0x003f);                 mdelay(1);
-       RF_WriteReg(dev, 0x09, 0x0335);                 mdelay(1);
-       RF_WriteReg(dev, 0x0a, 0x09d4);                 mdelay(1);
-       RF_WriteReg(dev, 0x0b, 0x07bb);                 mdelay(1);
-       RF_WriteReg(dev, 0x0c, 0x0850);                 mdelay(1);
-       RF_WriteReg(dev, 0x0d, 0x0cdf);                 mdelay(1);
-       RF_WriteReg(dev, 0x0e, 0x002b);                 mdelay(1);
-       RF_WriteReg(dev, 0x0f, 0x0114);                 mdelay(1);
-
-       RF_WriteReg(dev, 0x00, 0x01b7);                 mdelay(1);
-
-
-       for(i=1;i<=95;i++)
-       {
-               RF_WriteReg(dev, 0x01, i);      mdelay(1);
-               RF_WriteReg(dev, 0x02, ZEBRA_RF_RX_GAIN_TABLE[i]); mdelay(1);
-               //DbgPrint("RF - 0x%x = 0x%x", i, ZEBRA_RF_RX_GAIN_TABLE[i]);
-       }
-
-       RF_WriteReg(dev, 0x03, 0x0080);                 mdelay(1);      // write reg 18
-       RF_WriteReg(dev, 0x05, 0x0004);                 mdelay(1);      // write reg 20
-       RF_WriteReg(dev, 0x00, 0x00b7);                 mdelay(1);      // switch to reg0-reg15
-       //0xfd
-       //0xfd
-       //0xfd
-       RF_WriteReg(dev, 0x02, 0x0c4d);                 mdelay(1);
-       mdelay(100);    // Deay 100 ms. //0xfe
-       mdelay(100);    // Deay 100 ms. //0xfe
-       RF_WriteReg(dev, 0x02, 0x044d);                 mdelay(1);
-       RF_WriteReg(dev, 0x00, 0x02bf);                 mdelay(1);      //0x002f disable 6us corner change,  06f--> enable
-
-       //=============================================================================
-
-       //=============================================================================
-       // CCKCONF.TXT
-       //=============================================================================
-
-       //=============================================================================
-
-       //=============================================================================
-       // Follow WMAC RTL8225_Config()
-       //=============================================================================
-
-       // power control
-       write_nic_byte(dev, CCK_TXAGC, 0x03);
-       write_nic_byte(dev, OFDM_TXAGC, 0x07);
-       write_nic_byte(dev, ANTSEL, 0x03);
-
-       //=============================================================================
-
-       // OFDM BBP setup
-//     SetOutputEnableOfRfPins(dev);//by amy
-#endif
 
 
 
@@ -1629,10 +1460,8 @@ ZEBRA_Config_85BASIC_HardCode(
 //by amy for antenna
        //=============================================================================
 //{by amy 080312
-#ifdef CONFIG_RTL818X_S
        // Config Sw/Hw  Combinational Antenna Diversity. Added by Roger, 2008.02.26.
        SetAntennaConfig87SE(dev, priv->bDefaultAntenna1, priv->bSwAntennaDiverity);
-#endif
 //by amy 080312}
 #if 0
        // Config Sw/Hw  Antenna Diversity
@@ -1857,7 +1686,6 @@ UpdateInitialGain(
                break;
        }
 }
-#ifdef CONFIG_RTL818X_S
 //
 //     Description:
 //             Tx Power tracking mechanism routine on 87SE.
@@ -1878,7 +1706,6 @@ InitTxPwrTracking87SE(
        RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN);                  mdelay(1);
 }
 
-#endif
 void
 PhyConfig8185(
        struct net_device *dev
@@ -1896,7 +1723,6 @@ PhyConfig8185(
                break;
        }
 //{by amy 080312
-#ifdef CONFIG_RTL818X_S
        // Set default initial gain state to 4, approved by SD3 DZ, by Bruce, 2007-06-06.
        if(priv->bDigMechanism)
        {
@@ -1913,7 +1739,6 @@ PhyConfig8185(
        if(priv->bTxPowerTrack)
                InitTxPwrTracking87SE(dev);
 
-#endif
 //by amy 080312}
        priv->InitialGainBackUp= priv->InitialGain;
        UpdateInitialGain(dev);
@@ -2004,13 +1829,8 @@ HwConfigureRTL8185(
 #if 0
                PlatformIOWrite2Byte(dev, ARFR, 0x0fff);        // set 1M ~ 54M
 #endif
-#ifdef CONFIG_RTL818X_S
                // Aadded by Roger, 2007.11.15.
                PlatformIOWrite2Byte(dev, ARFR, 0x0fff); //set 1M ~ 54Mbps.
-#else
-               PlatformIOWrite2Byte(dev, ARFR, 0x0c00); //set 48Mbps, 54Mbps.
-                // By SD3 szuyi's request. by Roger, 2007.03.26.
-#endif
 //by amy
        }
        else
@@ -2083,7 +1903,6 @@ MacConfig_85BASIC(
 #if 0
        write_nic_dword(dev, RFTiming, 0x00004001);
 #endif
-#ifdef CONFIG_RTL818X_S
        // power save parameter based on "87SE power save parameters 20071127.doc", as follow.
 
        //Enable DA10 TX power saving
@@ -2104,9 +1923,6 @@ MacConfig_85BASIC(
        write_nic_word(dev, 0x37C, 0x00EC);
 //     write_nic_word(dev, 0x37E, 0x00FE);//-edward
        write_nic_word(dev, 0x37E, 0x00EC);//+edward
-#else
-       write_nic_dword(dev, RFTiming, 0x00004003);
-#endif
        write_nic_byte(dev, 0x24E,0x01);
 //by amy
 
@@ -2973,22 +2789,14 @@ void rtl8185b_adapter_start(struct net_device *dev)
        write_nic_byte(dev, CR9346, 0xc0);      // enable config register write
 //by amy
        tmpu8 = read_nic_byte(dev, CONFIG3);
-#ifdef CONFIG_RTL818X_S
        write_nic_byte(dev, CONFIG3, (tmpu8 |CONFIG3_PARM_En) );
-#else
-       write_nic_byte(dev, CONFIG3, (tmpu8 |CONFIG3_PARM_En | CONFIG3_CLKRUN_En) );
-#endif
 //by amy
        // Turn on Analog power.
        // Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko.
        write_nic_dword(dev, ANAPARAM2, ANAPARM2_ASIC_ON);
        write_nic_dword(dev, ANAPARAM, ANAPARM_ASIC_ON);
 //by amy
-#ifdef CONFIG_RTL818X_S
        write_nic_word(dev, ANAPARAM3, 0x0010);
-#else
-      write_nic_byte(dev, ANAPARAM3, 0x00);
-#endif
 //by amy
 
        write_nic_byte(dev, CONFIG3, tmpu8);