PKG_NAME:=bridge-utils
PKG_RELEASE:=1
PKG_SOURCE_URL:=@SF/bridge
-
-ifeq ($(CONFIG_LINUX_2_4),y)
- PKG_VERSION:=1.0.6
- PKG_MD5SUM:=9b7dc52656f5cbec846a7ba3299f73bd
-endif
-
-ifeq ($(CONFIG_LINUX_2_6),y)
- PKG_VERSION:=1.4
- PKG_MD5SUM:=0182fcac3a2b307113bbec34e5f1c673
-endif
+PKG_VERSION:=1.4
+PKG_MD5SUM:=0182fcac3a2b307113bbec34e5f1c673
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
define KernelPackage/diag
SUBMENU:=Other modules
- DEPENDS:=@TARGET_brcm_2_4||TARGET_brcm47xx
+ DEPENDS:=@TARGET_brcm47xx
TITLE:=Driver for router LEDs and Buttons
FILES:=$(PKG_BUILD_DIR)/diag.$(LINUX_KMOD_SUFFIX)
endef
$(CP) ./src/* $(PKG_BUILD_DIR)/
endef
-ifeq ($(BOARD),brcm-2.4)
- BUILDFLAGS=-DBCMDRIVER -I$(LINUX_DIR)/arch/mips/bcm947xx/include -DLINUX_2_4
-endif
-
define Build/Compile
$(MAKE) -C "$(LINUX_DIR)" \
CROSS_COMPILE="$(TARGET_CROSS)" \
#include <linux/timer.h>
#include <linux/version.h>
#include <asm/uaccess.h>
-
-#ifndef LINUX_2_4
#include <linux/workqueue.h>
#include <linux/skbuff.h>
#include <linux/netlink.h>
#include <net/sock.h>
extern struct sock *uevent_sock;
extern u64 uevent_next_seqnum(void);
-#else
-#include <linux/tqueue.h>
-#define INIT_WORK INIT_TQUEUE
-#define schedule_work schedule_task
-#define work_struct tq_struct
-#endif
#include "gpio.h"
#include "diag.h"
static void __init bcm57xx_init(void) {
int pin = 1 << 2;
-#ifndef LINUX_2_4
/* FIXME: switch comes up, but port mappings/vlans not right */
gpio_outen(pin, pin);
gpio_control(pin, 0);
gpio_out(pin, pin);
-#endif
}
static struct platform_t __initdata platforms[] = {
}
-#ifndef LINUX_2_4
static void add_msg(struct event_t *event, char *msg, int argv)
{
char *s;
kfree(event);
}
-#else /* !LINUX_2_4 */
-static inline char *kzalloc(unsigned int size, unsigned int gfp)
-{
- char *p;
-
- p = kmalloc(size, gfp);
- if (p == NULL)
- return NULL;
-
- memset(p, 0, size);
-
- return p;
-}
-
-static void add_msg(struct event_t *event, char *msg, int argv)
-{
- if (argv)
- event->argv[event->anr++] = event->scratch;
- else
- event->envp[event->enr++] = event->scratch;
-
- event->scratch += sprintf(event->scratch, "%s", msg) + 1;
-}
-
-static void hotplug_button(struct event_t *event)
-{
- char *scratch = kzalloc(256, GFP_KERNEL);
- event->scratch = scratch;
-
- add_msg(event, hotplug_path, 1);
- add_msg(event, "button", 1);
- fill_event(event);
- call_usermodehelper (event->argv[0], event->argv, event->envp);
- kfree(scratch);
- kfree(event);
-}
-#endif /* !LINUX_2_4 */
static int fill_event (struct event_t *event)
{
add_msg(event, buf, 0);
snprintf(buf, 128, "SEEN=%ld", event->seen);
add_msg(event, buf, 0);
-#ifndef LINUX_2_4
snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
add_msg(event, buf, 0);
-#endif
return 0;
}
-#ifndef LINUX_2_4
static irqreturn_t button_handler(int irq, void *dev_id)
-#else
-static irqreturn_t button_handler(int irq, void *dev_id, struct pt_regs *regs)
-#endif
{
struct button_t *b;
u32 in, changed;
event->seen = (jiffies - b->seen)/HZ;
event->name = b->name;
event->action = b->pressed ? "pressed" : "released";
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
-#else
- INIT_WORK(&event->wq, (void *)(void *)hotplug_button, (void *)event);
-#endif
schedule_work(&event->wq);
}
static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos)
{
-#ifdef LINUX_2_4
- struct inode *inode = file->f_dentry->d_inode;
- struct proc_dir_entry *dent = inode->u.generic_ip;
-#else
struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
-#endif
char *page;
int len = 0;
static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
{
-#ifdef LINUX_2_4
- struct inode *inode = file->f_dentry->d_inode;
- struct proc_dir_entry *dent = inode->u.generic_ip;
-#else
struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
-#endif
char *page;
int ret = -EINVAL;
CATEGORY:=Kernel modules
DEPENDS:=@PACKAGE_kmod-brcm-wl||PACKAGE_kmod-brcm-wl-mini
SUBMENU:=Proprietary BCM43xx WiFi driver
- SUBMENUDEP:=@TARGET_brcm47xx||@TARGET_brcm_2_4
+ SUBMENUDEP:=@TARGET_brcm47xx
endef
define KernelPackage/brcm-wl/Default
menu "Configuration"
depends on PACKAGE_busybox
-config BUSYBOX_CONFIG_FEATURE_DEVFS
- bool
- default y if LINUX_2_4
- default n if LINUX_2_6
-
-config BUSYBOX_CONFIG_FEATURE_2_4_MODULES
- bool
- default y if LINUX_2_4
- default n if LINUX_2_6
-
-config BUSYBOX_CONFIG_FEATURE_2_6_MODULES
- bool
- default n if LINUX_2_4
- default y if LINUX_2_6
-
config BUSYBOX_CONFIG_NOMMU
bool
depends NOMMU
PKG_INSTALL:=1
-# Kernel 2.4 Module
-FUSE24_VERSION=2.5.3
-FUSE24_SOURCE:=$(PKG_NAME)-$(FUSE24_VERSION).tar.gz
-FUSE24_MD5SUM:=9c7e8b6606b9f158ae20b8521ba2867c
-FUSE24_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(FUSE24_VERSION)
-FUSE24_INSTALL_DIR:=$(FUSE24_BUILD_DIR)/ipkg-install
-FUSE24_PATCH_DIR:=./patches-kernel24
-
include $(INCLUDE_DIR)/package.mk
define Package/fuse/Default
endef
define KernelPackage/fuse
- $(call Package/fuse/Default)
- SUBMENU:=Filesystems
- TITLE+= (kernel module)
- ifeq ($(KERNEL),2.4)
- FILES:=$(FUSE24_INSTALL_DIR)/lib/modules/$(LINUX_VERSION)/kernel/fs/fuse/fuse.$(LINUX_KMOD_SUFFIX)
- VERSION:=$(LINUX_VERSION)+$(FUSE24_VERSION)-$(PKG_RELEASE)
- else
- KCONFIG:= CONFIG_FUSE_FS
- FILES:=$(LINUX_DIR)/fs/fuse/fuse.$(LINUX_KMOD_SUFFIX)
- VERSION:=$(LINUX_VERSION)-$(LINUX_RELEASE)
- endif
- AUTOLOAD:=$(call AutoLoad,80,fuse)
+ $(call Package/fuse/Default)
+ SUBMENU:=Filesystems
+ TITLE+= (kernel module)
+ KCONFIG:= CONFIG_FUSE_FS
+ FILES:=$(LINUX_DIR)/fs/fuse/fuse.$(LINUX_KMOD_SUFFIX)
+ VERSION:=$(LINUX_VERSION)-$(LINUX_RELEASE)
+ AUTOLOAD:=$(call AutoLoad,80,fuse)
endef
define KernelPackage/fuse/description
--enable-static \
--disable-rpath \
--disable-example \
- --disable-mtab
-
-# kmod 2.4 args
-FUSE24_CONFIGURE_ARGS := $(CONFIGURE_ARGS) \
- --disable-lib --disable-util \
- --enable-kernel-module --disable-auto-modprobe \
- --with-kernel="$(LINUX_DIR)"
+ --disable-mtab
# generic package uses lib & utils
CONFIGURE_ARGS += --enable-lib --enable-util
-####### FUSE24 - START ######
-### if we're on kernel 2.4 build a kernel 2.4 compatible fuse module from older version, see also
-### http://sourceforge.net/apps/mediawiki/fuse/index.php?title=FAQ#What_version_of_FUSE_do_I_need_to_use_FUSE_with_Linux_2.4.3F
-ifeq ($(KERNEL),2.4)
-
-define Download/fuse24
- FILE:=$(FUSE24_SOURCE)
- URL:=$(PKG_SOURCE_URL)
- MD5SUM:=$(FUSE24_MD5SUM)
-endef
-$(eval $(call Download,fuse24))
-
-define Build/Prepare/fuse24
- rm -rf $(FUSE24_BUILD_DIR)/
- mkdir -p $(FUSE24_BUILD_DIR)/
- $(TAR) -xzf $(DL_DIR)/$(FUSE24_SOURCE) -C $(FUSE24_BUILD_DIR)/..
-endef
-
-define Build/Patch/fuse24
- $(call PatchDir,$(FUSE24_BUILD_DIR),$(FUSE24_PATCH_DIR),)
-endef
-
-define Build/Configure/fuse24
- (cd $(FUSE24_BUILD_DIR); \
- rm -rf config.{cache,status} ; \
- $(CONFIGURE_VARS) \
- ./configure \
- $(FUSE24_CONFIGURE_ARGS) \
- );
-endef
-
-define Build/Compile/fuse24
- $(MAKE) -C $(FUSE24_BUILD_DIR)/$(MAKE_PATH) \
- ARCH="$(LINUX_KARCH)" \
- CROSS_COMPILE="$(TARGET_CROSS)" \
- all;
-endef
-
-define Build/Install/fuse24
- rm -rf $(FUSE24_INSTALL_DIR)
- mkdir -p $(FUSE24_INSTALL_DIR)
- $(MAKE) -C $(FUSE24_BUILD_DIR) \
- ARCH="$(LINUX_KARCH)" \
- CROSS_COMPILE="$(TARGET_CROSS)" \
- DESTDIR="$(FUSE24_INSTALL_DIR)" \
- install
-endef
-
-define Build/Prepare
- @echo "--> Build/Prepare enter"
- $(call Build/Prepare/fuse24)
- $(call Build/Patch/fuse24)
- $(call Build/Prepare/Default)
- @echo "--> Build/Prepare leave"
-endef
-
-define Build/Configure
- @echo "--> Build/Configure enter"
- $(call Build/Configure/fuse24)
- $(call Build/Configure/Default)
- @echo "--> Build/Configure leave"
-endef
-
-define Build/Compile
- @echo "--> Build/Compile enter"
- $(call Build/Compile/fuse24)
- $(call Build/Compile/Default)
- @echo "--> Build/Compile leave"
-endef
-
-define Build/Install
- @echo "--> Build/Install enter"
- $(call Build/Install/fuse24)
- $(call Build/Install/Default)
- @echo "--> Build/Install leave"
-endef
-
-endif
-####### FUSE24 - END ######
-
define Build/InstallDev
@echo "--> Build/InstallDev enter"
mkdir -p $(1)/usr/include
PKG_MD5SUM:=c7534dc040ab90218257a78488ecd378
include $(INCLUDE_DIR)/package.mk
-ifeq ($(DUMP),)
- -include $(LINUX_DIR)/.config
-endif
-
-define KernelPackage/hostap/Default/2.4
- VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
-endef
-
-define KernelPackage/hostap/Default/2.6
- VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE)
-endef
define KernelPackage/hostap/Default
-$(call KernelPackage/hostap/Default/$(KERNEL))
+ VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE)
SUBMENU:=Wireless Drivers
URL:=http://hostap.epitest.fi/
endef
define KernelPackage/hostap
$(call KernelPackage/hostap/Default)
TITLE:=Host AP support for Prism2/2.5/3
- DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +LINUX_2_6:kmod-lib80211 +wireless-tools
+ DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-lib80211 +wireless-tools
KCONFIG:=CONFIG_HOSTAP CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-endef
-
-define KernelPackage/hostap/2.4
-# NOTE: needed to remove the dependency on kmod-ieee80211 in the final ipkg
- DEPENDS:=
-# NOTE: needed to build the standalone version on 2.4
- KCONFIG:=
- FILES:= \
- $(PKG_BUILD_DIR)/driver/modules/hostap.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_ccmp.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_tkip.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_wep.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,60,hostap hostap_crypt_wep hostap_crypt_tkip hostap_crypt_ccmp)
-endef
-
-define KernelPackage/hostap/2.6
- FILES:= \
- $(LINUX_DIR)/drivers/net/wireless/hostap/hostap.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/net/wireless/hostap/hostap.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,hostap)
endef
TITLE:=Host AP driver for PCMCIA adaptors
DEPENDS:=@PCMCIA_SUPPORT +kmod-hostap +kmod-pcmcia-core
KCONFIG:=CONFIG_HOSTAP_CS
+ FILES:=$(LINUX_DIR)/drivers/net/wireless/hostap/hostap_cs.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,hostap_cs)
endef
-define KernelPackage/hostap-cs/2.4
-# NOTE: needed to build the standalone version on 2.4
- KCONFIG:=
- FILES:= \
- $(PKG_BUILD_DIR)/driver/modules/hostap_cs.$(LINUX_KMOD_SUFFIX)
-endef
-define KernelPackage/hostap-cs/2.6
- FILES:= \
- $(LINUX_DIR)/drivers/net/wireless/hostap/hostap_cs.$(LINUX_KMOD_SUFFIX)
-endef
define KernelPackage/hostap-cs/description
$(call KernelPackage/hostap/Default/description)
TITLE:=Host AP driver for PCI adaptors
DEPENDS:=@PCI_SUPPORT +kmod-hostap
KCONFIG:=CONFIG_HOSTAP_PCI
+ FILES:=$(LINUX_DIR)/drivers/net/wireless/hostap/hostap_pci.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,hostap_pci)
endef
-define KernelPackage/hostap-pci/2.4
-# NOTE: needed to build the standalone version on 2.4
- KCONFIG:=
- FILES:= \
- $(PKG_BUILD_DIR)/driver/modules/hostap_pci.$(LINUX_KMOD_SUFFIX)
-endef
-
-define KernelPackage/hostap-pci/2.6
- FILES:= \
- $(LINUX_DIR)/drivers/net/wireless/hostap/hostap_pci.$(LINUX_KMOD_SUFFIX)
-endef
-
define KernelPackage/hostap-pci/description
$(call KernelPackage/hostap/Default/description)
This package contains the Host AP driver for Prism2.5 PCI adaptors.
TITLE:=Host AP driver for PLX9052 based PCI adaptors
DEPENDS:=@PCI_SUPPORT +kmod-hostap
KCONFIG:=CONFIG_HOSTAP_PLX
+ FILES:=$(LINUX_DIR)/drivers/net/wireless/hostap/hostap_plx.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,hostap_plx)
endef
-define KernelPackage/hostap-plx/2.4
-# NOTE: needed to build the standalone version on 2.4
- KCONFIG:=
- FILES:= \
- $(PKG_BUILD_DIR)/driver/modules/hostap_plx.$(LINUX_KMOD_SUFFIX)
-endef
-
-define KernelPackage/hostap-plx/2.6
- FILES:= \
- $(LINUX_DIR)/drivers/net/wireless/hostap/hostap_plx.$(LINUX_KMOD_SUFFIX)
-endef
-
define KernelPackage/hostap-plx/description
$(call KernelPackage/hostap/Default/description)
This package contains the Host AP driver for Prism2/2.5/3 in PLX9052
endef
-ifeq ($(KERNEL),2.4)
- define Build/Compile
- $(MAKE) -C $(LINUX_DIR)/ \
- ARCH="$(LINUX_KARCH)" \
- CROSS_COMPILE="$(TARGET_CROSS)" \
- SUBDIRS="$(PKG_BUILD_DIR)/driver/modules" \
- modules
- endef
-else
- define Build/Prepare
+define Build/Prepare
mkdir -p $(PKG_BUILD_DIR)
- endef
-
- define Build/Configure
- endef
-
- define Build/Compile
- endef
-endif
+endef
+
+define Build/Configure
+
+endef
+
+define Build/Compile
+
+endef
define KernelPackage/hostap/install
$(INSTALL_DIR) $(1)/lib/wifi
# XXX: xburst has CONFIG_CRC16=y because of CONFIG_UBIFS_FS=y
define SetDepends/crc16
- DEPENDS:= @!(LINUX_2_4||TARGET_xburst)
+ DEPENDS:= @!TARGET_xburst
endef
define AddDepends/crc16
- DEPENDS+= +!(LINUX_2_4||TARGET_xburst):kmod-crc16 $(1)
+ DEPENDS+= +!TARGET_xburst:kmod-crc16 $(1)
endef
define KernelPackage/misdn
SUBMENU:=$(NETWORK_SUPPORT_MENU)
TITLE:=mISDN (ISDN) Support
- DEPENDS:=@LINUX_2_6
KCONFIG:= \
+ CONFIG_ISDN=y \
CONFIG_MISDN \
CONFIG_MISDN_DSP \
CONFIG_MISDN_L1OIP
AUTOLOAD:=$(call AutoLoad,30,mISDN_core mISDN_dsp l1oip)
endef
-define KernelPackage/misdn/2.4
- KCONFIG+= \
- CONFIG_ISDN
-endef
-
-define KernelPackage/misdn/2.6
- KCONFIG+= \
- CONFIG_ISDN=y
-endef
-
define KernelPackage/misdn/description
Modular ISDN driver support
endef
TITLE:=Old ISDN4Linux (deprecated)
DEPENDS:=@LINUX_2_6
KCONFIG:= \
+ CONFIG_ISDN=y \
CONFIG_ISDN_I4L \
CONFIG_ISDN_PPP=y \
CONFIG_ISDN_PPP_VJ=y \
CONFIG_ISDN_X25=y \
CONFIG_ISDN_DIVERSION
FILES:= \
- $(LINUX_DIR)/drivers/isdn/divert/dss1_divert.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,isdn isdn_bsdcomp dss1_divert)
-endef
-
-define KernelPackage/isdn4linux/2.4
- KCONFIG+= \
- CONFIG_ISDN
- FILES+= \
- $(LINUX_DIR)/drivers/isdn/isdn_bsdcomp.$(LINUX_KMOD_SUFFIX)
-endef
-
-define KernelPackage/isdn4linux/2.6
- KCONFIG+= \
- CONFIG_ISDN=y
- FILES+= \
+ $(LINUX_DIR)/drivers/isdn/divert/dss1_divert.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/isdn/i4l/isdn.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/isdn/i4l/isdn_bsdcomp.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,40,isdn isdn_bsdcomp dss1_divert)
endef
define KernelPackage/isdn4linux/description
$(eval $(call KernelPackage,ipv6))
-# sit is not selectable on 2.4, but built when ipv6 is enabled
define KernelPackage/sit
SUBMENU:=$(NETWORK_SUPPORT_MENU)
- DEPENDS:=+kmod-ipv6 +LINUX_2_6:kmod-iptunnel4
+ DEPENDS:=+kmod-ipv6 +kmod-iptunnel4
TITLE:=IPv6-in-IPv4 tunnelling
KCONFIG:=CONFIG_IPV6 CONFIG_IPV6_SIT
FILES:=$(LINUX_DIR)/net/ipv6/sit.$(LINUX_KMOD_SUFFIX)
KCONFIG:= \
CONFIG_PPP_MPPE_MPPC \
CONFIG_PPP_MPPE
-endef
-
-define KernelPackage/mppe/2.4
-# KCONFIG:=CONFIG_PPP_MPPE_MPPC
- FILES:=$(LINUX_DIR)/drivers/net/ppp_mppe_mppc.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,31,ppp_mppe_mppc)
-endef
-
-define KernelPackage/mppe/2.6
-# KCONFIG:=CONFIG_PPP_MPPE
FILES:=$(LINUX_DIR)/drivers/net/ppp_mppe.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,31,ppp_mppe)
endef
#
define AddDepends/nls
- DEPENDS+= +!LINUX_2_4:kmod-nls-base
+ DEPENDS+= +kmod-nls-base
endef
define KernelPackage/nls-base
OTHER_MENU:=Other modules
-# XXX: added a workaround for watchdog path changes
-ifeq ($(KERNEL),2.4)
- WATCHDOG_DIR=char
-endif
-WATCHDOG_DIR?=watchdog
+WATCHDOG_DIR:=watchdog
define KernelPackage/bluetooth
$(call AddDepends/crc16)
$(call AddDepends/hid)
$(call AddDepends/rfkill)
-endef
-
-define KernelPackage/bluetooth/2.4
-# KCONFIG:= \
-# CONFIG_BLUEZ \
-# CONFIG_BLUEZ_L2CAP \
-# CONFIG_BLUEZ_SCO \
-# CONFIG_BLUEZ_RFCOMM \
-# CONFIG_BLUEZ_BNEP \
-# CONFIG_BLUEZ_HCIUART \
-# CONFIG_BLUEZ_HCIUSB
- FILES:= \
- $(LINUX_DIR)/net/bluetooth/bluez.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/bluetooth/hci_usb.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,bluez l2cap sco rfcomm bnep hci_uart hci_usb)
-endef
-
-define KernelPackage/bluetooth/2.6
-# KCONFIG:= \
-# CONFIG_BT \
-# CONFIG_BT_L2CAP \
-# CONFIG_BT_SCO \
-# CONFIG_BT_RFCOMM \
-# CONFIG_BT_BNEP \
-# CONFIG_BT_HCIUSB \
-# CONFIG_BT_HCIUART
FILES:= \
$(LINUX_DIR)/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
TITLE:=Input device core
KCONFIG:=CONFIG_INPUT
$(call SetDepends/input)
+ FILES:=$(LINUX_DIR)/drivers/input/input-core.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,19,input-core)
endef
define KernelPackage/input-core/description
Kernel modules for support of input device
endef
-define KernelPackage/input-core/2.4
- FILES:=$(LINUX_DIR)/drivers/input/input.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,19,input)
-endef
-
-define KernelPackage/input-core/2.6
- FILES:=$(LINUX_DIR)/drivers/input/input-core.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,19,input-core)
-endef
-
$(eval $(call KernelPackage,input-core))
define KernelPackage/lp
SUBMENU:=$(OTHER_MENU)
TITLE:=Parallel port and line printer support
- DEPENDS:=@LINUX_2_4
+ DEPENDS:=@BROKEN
KCONFIG:= \
CONFIG_PARPORT \
CONFIG_PRINTER \
AUTOLOAD:=$(call AutoLoad,50,parport lp)
endef
-define KernelPackage/lp/2.4
- FILES:= \
- $(LINUX_DIR)/drivers/parport/parport.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/parport/parport_*.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/char/lp.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/char/ppdev.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50, \
- parport \
- parport_splink \
- lp \
- )
-endef
-
$(eval $(call KernelPackage,lp))
USB_MENU:=USB Support
-ifneq ($(CONFIG_LINUX_2_4),)
- USBNET_DIR:=usb/net
-endif
-
-USBNET_DIR?=net/usb
+USBNET_DIR:=net/usb
USBHID_DIR?=hid/usbhid
USBINPUT_DIR?=input/misc
TITLE:=Support for USB
DEPENDS:=@USB_SUPPORT +LINUX_2_6_31:kmod-nls-base +LINUX_2_6_32:kmod-nls-base +LINUX_2_6_33:kmod-nls-base +LINUX_2_6_34:kmod-nls-base
KCONFIG:=CONFIG_USB
- AUTOLOAD:=$(call AutoLoad,20,usbcore,1)
-endef
-
-define KernelPackage/usb-core/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/usbcore.$(LINUX_KMOD_SUFFIX)
-endef
-
-define KernelPackage/usb-core/2.6
FILES:=$(LINUX_DIR)/drivers/usb/core/usbcore.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,usbcore,1)
endef
define KernelPackage/usb-core/description
KCONFIG:= \
CONFIG_USB_UHCI_ALT \
CONFIG_USB_UHCI_HCD
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-uhci/2.4
-# KCONFIG:=CONFIG_USB_UHCI_ALT
- FILES:=$(LINUX_DIR)/drivers/usb/host/uhci.o
- AUTOLOAD:=$(call AutoLoad,50,uhci,1)
-endef
-
-define KernelPackage/usb-uhci/2.6
-# KCONFIG:=CONFIG_USB_UHCI_HCD
FILES:=$(LINUX_DIR)/drivers/usb/host/uhci-hcd.ko
AUTOLOAD:=$(call AutoLoad,50,uhci-hcd,1)
+ $(call AddDepends/usb)
endef
define KernelPackage/usb-uhci/description
$(eval $(call KernelPackage,usb-uhci,1))
-define KernelPackage/usb-uhci-iv
- TITLE:=Support for Intel/VIA UHCI controllers
- DEPENDS:=@LINUX_2_4
- KCONFIG:=CONFIG_USB_UHCI
- FILES:=$(LINUX_DIR)/drivers/usb/host/usb-uhci.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,usb-uhci,1)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-uhci-iv/description
- Kernel support for Intel/VIA USB UHCI controllers
-endef
-
-$(eval $(call KernelPackage,usb-uhci-iv,1))
-
-
define KernelPackage/usb-ohci
TITLE:=Support for OHCI controllers
KCONFIG:= \
CONFIG_USB_OHCI \
CONFIG_USB_OHCI_HCD \
CONFIG_USB_OHCI_AR71XX=y
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-ohci/2.4
-# KCONFIG:=CONFIG_USB_OHCI
- FILES:=$(LINUX_DIR)/drivers/usb/host/usb-ohci.o
- AUTOLOAD:=$(call AutoLoad,50,usb-ohci,1)
-endef
-
-define KernelPackage/usb-ohci/2.6
-# KCONFIG:=CONFIG_USB_OHCI_HCD
FILES:=$(LINUX_DIR)/drivers/usb/host/ohci-hcd.ko
AUTOLOAD:=$(call AutoLoad,50,ohci-hcd,1)
+ $(call AddDepends/usb)
endef
define KernelPackage/usb-ohci/description
define KernelPackage/usb-acm
TITLE:=Support for modems/isdn controllers
KCONFIG:=CONFIG_USB_ACM
-$(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-acm/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/acm.o
- AUTOLOAD:=$(call AutoLoad,60,acm)
-endef
-
-define KernelPackage/usb-acm/2.6
FILES:=$(LINUX_DIR)/drivers/usb/class/cdc-acm.ko
AUTOLOAD:=$(call AutoLoad,60,cdc-acm)
+$(call AddDepends/usb)
endef
define KernelPackage/usb-acm/description
CONFIG_SND_USB_AUDIO
$(call AddDepends/usb)
$(call AddDepends/sound)
-endef
-
-define KernelPackage/usb-audio/2.4
-# KCONFIG:=CONFIG_USB_AUDIO
- FILES:=$(LINUX_DIR)/drivers/usb/audio.o
- AUTOLOAD:=$(call AutoLoad,60,audio)
-endef
-
-define KernelPackage/usb-audio/2.6
-# KCONFIG:=CONFIG_SND_USB_AUDIO
FILES:= \
$(LINUX_DIR)/sound/usb/snd-usb-lib.ko \
$(LINUX_DIR)/sound/usb/snd-usb-audio.ko
define KernelPackage/usb-printer
TITLE:=Support for printers
KCONFIG:=CONFIG_USB_PRINTER
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-printer/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/printer.o
- AUTOLOAD:=$(call AutoLoad,60,printer)
-endef
-
-define KernelPackage/usb-printer/2.6
FILES:=$(LINUX_DIR)/drivers/usb/class/usblp.ko
AUTOLOAD:=$(call AutoLoad,60,usblp)
+ $(call AddDepends/usb)
endef
define KernelPackage/usb-printer/description
TITLE:=Kernel modules for USB-to-Ethernet convertors
KCONFIG:=CONFIG_USB_USBNET
AUTOLOAD:=$(call AutoLoad,60,usbnet)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-net/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/usbnet.$(LINUX_KMOD_SUFFIX)
-endef
-
-define KernelPackage/usb-net/2.6
FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/usbnet.$(LINUX_KMOD_SUFFIX)
+ $(call AddDepends/usb)
endef
define KernelPackage/usb-net/description
define KernelPackage/lib80211
SUBMENU:=$(WIRELESS_MENU)
TITLE:=802.11 Networking stack
- DEPENDS:=@!LINUX_2_4
KCONFIG:= \
CONFIG_LIB80211 \
CONFIG_LIB80211_CRYPT_WEP \
SECTION:=utils
CATEGORY:=Base system
TITLE:=Userspace port of the Broadcom NVRAM manipulation tool
- DEPENDS:=@TARGET_brcm_2_4||@TARGET_brcm47xx||@TARGET_ar71xx
+ DEPENDS:=@TARGET_brcm47xx||@TARGET_ar71xx
endef
define Package/nvram/description
This package contains an utility to manipulate NVRAM on Broadcom based devices.
- It works on both brcm-2.4 and bcm47xx (Linux 2.6) without using the kernel api.
+ It works on bcm47xx (Linux 2.6) without using the kernel api.
endef
define Build/Prepare
define KernelPackage/rtc-rv5c386a
SUBMENU:=Other modules
- DEPENDS:=@TARGET_brcm_2_4||TARGET_brcm47xx
+ DEPENDS:=@TARGET_brcm47xx
TITLE:=Driver for RTC RV5C386A (used in WL-700gE and WL-HDD)
AUTOLOAD:=$(call AutoLoad,70,rtc)
FILES:=$(PKG_BUILD_DIR)/rtc.$(LINUX_KMOD_SUFFIX)
$(CP) ./src/* $(PKG_BUILD_DIR)/
endef
-ifeq ($(BOARD),brcm-2.4)
- BUILDFLAGS=-DBCMDRIVER -I$(LINUX_DIR)/arch/mips/bcm947xx/include -DLINUX_2_4
-endif
-
define Build/Compile
$(MAKE) -C "$(LINUX_DIR)" \
CROSS_COMPILE="$(TARGET_CROSS)" \
define KernelPackage/switch
SUBMENU:=Other modules
- DEPENDS:=@TARGET_brcm_2_4||TARGET_brcm47xx||TARGET_brcm63xx
+ DEPENDS:=@TARGET_brcm47xx||TARGET_brcm63xx
TITLE:=Switch drivers
FILES:= \
$(PKG_BUILD_DIR)/switch-core.$(LINUX_KMOD_SUFFIX) \
$(CP) ./src/* $(PKG_BUILD_DIR)/
endef
-ifeq ($(BOARD),brcm-2.4)
- BUILDFLAGS := -DBROADCOM -DBCMDRIVER -I$(LINUX_DIR)/arch/mips/bcm947xx/include
-else
- ifeq ($(BOARD),brcm47xx)
+ifeq ($(BOARD),brcm47xx)
BUILDFLAGS := -DBROADCOM
- endif
endif
-
define Build/Compile
$(MAKE) -C "$(LINUX_DIR)" \
CROSS_COMPILE="$(TARGET_CROSS)" \
static ssize_t switch_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos)
{
-#ifdef LINUX_2_4
- struct inode *inode = file->f_dentry->d_inode;
- struct proc_dir_entry *dent = inode->u.generic_ip;
-#else
struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
-#endif
char *page;
int len = 0;
static ssize_t switch_proc_write(struct file *file, const char *buf, size_t count, void *data)
{
-#ifdef LINUX_2_4
- struct inode *inode = file->f_dentry->d_inode;
- struct proc_dir_entry *dent = inode->u.generic_ip;
-#else
struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
-#endif
char *page;
int ret = -EINVAL;
#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
#endif
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#define LINUX_2_4
-#endif
-
typedef int (*switch_handler)(void *driver, char *buf, int nr);
typedef struct {
#define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9)
#define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10)
-/* linux 2.4 does not have 'bool' */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#define bool int
-#endif
-
-/* Only available on brcm-2.4/brcm47xx */
+/* Only available on brcm47xx */
#ifdef BROADCOM
extern char *nvram_get(const char *name);
#define getvar(str) (nvram_get(str)?:"")
projects / openwrt / staging / lynxis.git / commitdiff