Some DP dongles in particular seem to be fussy about too large
link M/N values. Set specific value for N divider can resolve
this issue per dongle vendor's comment. So configure N as
constant value (0x8000) to instead of reduce M/N formula when
specific DP dongle connected.
v2: add more comments for issue description and fix typo.
v3: add lost commit messages back for version 2
v4: send patch to both intel-gfx and dri-devel
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Tested-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-3-git-send-email-shawn.c.lee@intel.com
static const struct dpcd_quirk dpcd_quirk_list[] = {
/* Analogix 7737 needs reduced M and N at HBR2 link rates */
- { OUI(0x00, 0x22, 0xb9), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_LIMITED_M_N) },
+ { OUI(0x00, 0x22, 0xb9), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_CONSTANT_N) },
};
#undef OUI
static void compute_m_n(unsigned int m, unsigned int n,
uint32_t *ret_m, uint32_t *ret_n,
- bool reduce_m_n)
+ bool constant_n)
{
/*
- * Reduce M/N as much as possible without loss in precision. Several DP
- * dongles in particular seem to be fussy about too large *link* M/N
- * values. The passed in values are more likely to have the least
- * significant bits zero than M after rounding below, so do this first.
+ * Several DP dongles in particular seem to be fussy about
+ * too large link M/N values. Give N value as 0x8000 that
+ * should be acceptable by specific devices. 0x8000 is the
+ * specified fixed N value for asynchronous clock mode,
+ * which the devices expect also in synchronous clock mode.
*/
- if (reduce_m_n) {
- while ((m & 1) == 0 && (n & 1) == 0) {
- m >>= 1;
- n >>= 1;
- }
- }
+ if (constant_n)
+ *ret_n = 0x8000;
+ else
+ *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
- *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
*ret_m = div_u64((uint64_t) m * *ret_n, n);
intel_reduce_m_n_ratio(ret_m, ret_n);
}
intel_link_compute_m_n(int bits_per_pixel, int nlanes,
int pixel_clock, int link_clock,
struct intel_link_m_n *m_n,
- bool reduce_m_n)
+ bool constant_n)
{
m_n->tu = 64;
compute_m_n(bits_per_pixel * pixel_clock,
link_clock * nlanes * 8,
&m_n->gmch_m, &m_n->gmch_n,
- reduce_m_n);
+ constant_n);
compute_m_n(pixel_clock, link_clock,
&m_n->link_m, &m_n->link_n,
- reduce_m_n);
+ constant_n);
}
static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
void intel_link_compute_m_n(int bpp, int nlanes,
int pixel_clock, int link_clock,
struct intel_link_m_n *m_n,
- bool reduce_m_n);
+ bool constant_n);
#endif
struct intel_connector *intel_connector = intel_dp->attached_connector;
struct intel_digital_connector_state *intel_conn_state =
to_intel_digital_connector_state(conn_state);
- bool reduce_m_n = drm_dp_has_quirk(&intel_dp->desc,
- DP_DPCD_QUIRK_LIMITED_M_N);
+ bool constant_n = drm_dp_has_quirk(&intel_dp->desc,
+ DP_DPCD_QUIRK_CONSTANT_N);
if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv) && port != PORT_A)
pipe_config->has_pch_encoder = true;
adjusted_mode->crtc_clock,
pipe_config->port_clock,
&pipe_config->dp_m_n,
- reduce_m_n);
+ constant_n);
if (intel_connector->panel.downclock_mode != NULL &&
dev_priv->drrs.type == SEAMLESS_DRRS_SUPPORT) {
intel_connector->panel.downclock_mode->clock,
pipe_config->port_clock,
&pipe_config->dp_m2_n2,
- reduce_m_n);
+ constant_n);
}
if (!HAS_DDI(dev_priv))
int lane_count, slots;
const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
int mst_pbn;
- bool reduce_m_n = drm_dp_has_quirk(&intel_dp->desc,
- DP_DPCD_QUIRK_LIMITED_M_N);
+ bool constant_n = drm_dp_has_quirk(&intel_dp->desc,
+ DP_DPCD_QUIRK_CONSTANT_N);
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
return false;
adjusted_mode->crtc_clock,
pipe_config->port_clock,
&pipe_config->dp_m_n,
- reduce_m_n);
+ constant_n);
pipe_config->dp_m_n.tu = slots;
*/
enum drm_dp_quirk {
/**
- * @DP_DPCD_QUIRK_LIMITED_M_N:
+ * @DP_DPCD_QUIRK_CONSTANT_N:
*
* The device requires main link attributes Mvid and Nvid to be limited
- * to 16 bits.
+ * to 16 bits. So will give a constant value (0x8000) for compatability.
*/
- DP_DPCD_QUIRK_LIMITED_M_N,
+ DP_DPCD_QUIRK_CONSTANT_N,
};
/**