ARM: shmobile: dts: Remove r8a7791-koelsch-reference.dts

The dts file has been superseded by r8a7791-koelsch.dts and been removed
from the ARCH_SHMOBILE_LEGACY dtb target. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/boot/dts/r8a7791-koelsch-reference.dts b/arch/arm/boot/dts/r8a7791-koelsch-reference.dts
deleted file mode 100644 (file)
index 588ca17..0000000
--- a/arch/arm/boot/dts/r8a7791-koelsch-reference.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Device Tree Source for the Koelsch board
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-       model = "Koelsch";
-       compatible = "renesas,koelsch-reference", "renesas,r8a7791";
-
-       chosen {
-               bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-       };
-
-       memory@40000000 {
-               device_type = "memory";
-               reg = <0 0x40000000 0 0x80000000>;
-       };
-
-       lbsc {
-               #address-cells = <1>;
-               #size-cells = <1>;
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-
-               key-a {
-                       gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-                       linux,code = <30>;
-                       label = "SW30";
-                       gpio-key,wakeup;
-                       debounce-interval = <20>;
-               };
-               key-b {
-                       gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-                       linux,code = <48>;
-                       label = "SW31";
-                       gpio-key,wakeup;
-                       debounce-interval = <20>;
-               };
-               key-c {
-                       gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
-                       linux,code = <46>;
-                       label = "SW32";
-                       gpio-key,wakeup;
-                       debounce-interval = <20>;
-               };
-               key-d {
-                       gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
-                       linux,code = <32>;
-                       label = "SW33";
-                       gpio-key,wakeup;
-                       debounce-interval = <20>;
-               };
-               key-e {
-                       gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-                       linux,code = <18>;
-                       label = "SW34";
-                       gpio-key,wakeup;
-                       debounce-interval = <20>;
-               };
-               key-f {
-                       gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
-                       linux,code = <33>;
-                       label = "SW35";
-                       gpio-key,wakeup;
-                       debounce-interval = <20>;
-               };
-               key-g {
-                       gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-                       linux,code = <34>;
-                       label = "SW36";
-                       gpio-key,wakeup;
-                       debounce-interval = <20>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-               led6 {
-                       gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-               };
-               led7 {
-                       gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-               };
-               led8 {
-                       gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&pfc {
-       pinctrl-0 = <&scif0_pins &scif1_pins>;
-       pinctrl-names = "default";
-
-       scif0_pins: serial0 {
-               renesas,groups = "scif0_data_d";
-               renesas,function = "scif0";
-       };
-
-       scif1_pins: serial1 {
-               renesas,groups = "scif1_data_d";
-               renesas,function = "scif1";
-       };
-};