+++ /dev/null
-#
-# Copyright (C) 2006-2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-#Add target specific (nommu) flags
-TARGET_CFLAGS+= -DNO_FORK
-
-ARCH:=ubicom32
-BOARD:=ubicom32
-BOARDNAME:=Ubicom IPxx
-FEATURES:=nommu ramdisk broken
-
-LINUX_VERSION:=2.6.30.10
-
-include $(INCLUDE_DIR)/target.mk
-
-KERNEL_MAKEOPTS += LDFLAGS_BUILD_ID=""
-
-define Target/Description
- Build firmware images for Ubicom based routers and media devices.
-endef
-
-$(eval $(call BuildTarget))
+++ /dev/null
-# CONFIG_ACCESS_OK_CHECKS_ENABLED is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
-# CONFIG_ARPD is not set
-# CONFIG_BINARY_PRINTF is not set
-CONFIG_BINFMT_ELF_FDPIC=y
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-CONFIG_BINFMT_ZFLAT=y
-CONFIG_BITREVERSE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CMDLINE="console=ttyUM0 console=ttyUS0 serdes=0x02004000,61,250000000"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_RNG2=y
-# CONFIG_CRYPTO_UBICOM32 is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_IRQMEASURE is not set
-# CONFIG_DEBUG_PCIMEASURE is not set
-CONFIG_DEBUG_VERBOSE=y
-CONFIG_DECOMPRESS_LZMA=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEVKMEM=y
-CONFIG_DEVPORT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_EPOLL is not set
-# CONFIG_EVENTFD is not set
-CONFIG_FORCE_MAX_ZONEORDER=14
-# CONFIG_FPU is not set
-# CONFIG_FUTEX is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GEN_RTC is not set
-CONFIG_GPIOLIB=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAVE_CLK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_UBICOM32=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_SOURCE="../romfs ../vendors/Ubicom/RouterGateway/initramfs_list"
-CONFIG_INPUT=y
-# CONFIG_INPUT_MISC is not set
-CONFIG_INPUT_POLLDEV=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IP5160DEV is not set
-# CONFIG_IP5160EVAL is not set
-# CONFIG_IP5170DPF is not set
-# CONFIG_IP7145DPF is not set
-# CONFIG_IP7160BRINGUP is not set
-# CONFIG_IP7160DPF is not set
-CONFIG_IP7160RGW=y
-# CONFIG_IP7160RGWLCD is not set
-# CONFIG_IP7500AV is not set
-# CONFIG_IP7500IAP is not set
-# CONFIG_IP7500MEDIA is not set
-# CONFIG_IP7500MODULE is not set
-# CONFIG_IP7500WSPKR is not set
-# CONFIG_IRQSTACKS is not set
-CONFIG_IRQ_PER_CPU=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-# CONFIG_JFFS2_SUMMARY is not set
-CONFIG_LDM_DEBUG=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_TRIGGERS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LIBCRC32C=y
-# CONFIG_LINKER_RELAXATION is not set
-CONFIG_MIN_RAMSIZE=0x02000000
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_MMC_UBICOM32 is not set
-# CONFIG_MMU is not set
-CONFIG_MODULE_FORCE_LOAD=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_NAND_SPI_ER is not set
-CONFIG_MTD_UBI32_M25P80=y
-# CONFIG_MTD_UBI32_NAND_SPI_ER is not set
-# CONFIG_NET_ETHERNET is not set
-# CONFIG_NOBOARD is not set
-CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
-CONFIG_NO_HZ=y
-CONFIG_NO_IOPORT=y
-# CONFIG_NO_KERNEL_MSG is not set
-CONFIG_OCM_MODULES_FALLBACK_TO_DDR=y
-CONFIG_OCM_MODULES_MAY_CONSUME_REMAINING_CODESPACE=y
-CONFIG_OCM_MODULES_RESERVATION=41
-CONFIG_OLD_40400010_SYSTEM_CALL=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DEV0_IDSEL=0x001000000
-CONFIG_PCI_DEV1_IDSEL=0x002000000
-CONFIG_PRINTK_TIME=y
-CONFIG_PROTECT_KERNEL=y
-CONFIG_RAMKERNEL=y
-# CONFIG_RTC is not set
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_UBI32_MAILBOX=y
-CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE=y
-# CONFIG_SERIAL_UBI32_SERDES is not set
-# CONFIG_SERIAL_UBI32_UARTTIO is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_SND_UBI32 is not set
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SPI_SPIDEV is not set
-CONFIG_SPI_UBICOM32_GPIO=y
-# CONFIG_STOP_ON_BUG is not set
-# CONFIG_STOP_ON_TRAP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_TIMERFD is not set
-CONFIG_TIMER_EXTRA_ALLOC=0
-CONFIG_TIME_LOW_RES=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_UBI32_WDT=y
-CONFIG_UBICOM32=y
-CONFIG_UBICOM32_GMAC=y
-CONFIG_UBICOM32_OCM_FOR_SKB=y
-# CONFIG_UBICOM32_PLIO is not set
-CONFIG_UBICOM32_V4=y
-# CONFIG_UBICOM_HID is not set
-CONFIG_UBICOM_INPUT=y
-# CONFIG_UBICOM_INPUT_I2C is not set
-CONFIG_UBICOM_SWITCH=y
-CONFIG_UBICOM_SWITCH_BCM539X=y
-# CONFIG_UNALIGNED_ACCESS_DISABLED is not set
-CONFIG_UNALIGNED_ACCESS_ENABLED=y
-# CONFIG_UNALIGNED_ACCESS_USERSPACE_ONLY is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
+++ /dev/null
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-
-mainmenu "uClinux/ubicom32 (w/o MMU) Kernel Configuration"
-
-config UBICOM32
- bool
- select HAVE_OPROFILE
- default y
-
-config RAMKERNEL
- bool
- default y
-
-config CPU_BIG_ENDIAN
- bool
- default y
-
-config FORCE_MAX_ZONEORDER
- int
- default "14"
-
-config HAVE_CLK
- bool
- default y
-
-config MMU
- bool
- default n
-
-config FPU
- bool
- default n
-
-config ZONE_DMA
- bool
- default y
-
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
- default n
-
-config ARCH_HAS_ILOG2_U32
- bool
- default n
-
-config ARCH_HAS_ILOG2_U64
- bool
- default n
-
-config GENERIC_FIND_NEXT_BIT
- bool
- default y
-
-config GENERIC_GPIO
- bool
- default y
-
-config GPIOLIB
- bool
- default y
-
-config GENERIC_HWEIGHT
- bool
- default y
-
-config GENERIC_HARDIRQS
- bool
- default y
-
-config STACKTRACE_SUPPORT
- bool
- default y
-
-config LOCKDEP_SUPPORT
- bool
- default y
-
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
-config GENERIC_TIME
- bool
- default y
-
-config TIME_LOW_RES
- bool
- default y
-
-config GENERIC_CLOCKEVENTS
- bool
- default y
-
-config GENERIC_CLOCKEVENTS_BROADCAST
- bool
- depends on GENERIC_CLOCKEVENTS
- default y if SMP && !LOCAL_TIMERS
-
-config NO_IOPORT
- def_bool y
-
-config ARCH_SUPPORTS_AOUT
- def_bool y
-
-config IRQ_PER_CPU
- bool
- default y
-
-config SCHED_NO_NO_OMIT_FRAME_POINTER
- bool
- default y
-
-config UBICOM32_PLIO
- bool
- default n
-
-menu "Processor type and features"
-
-comment "Processor type will be selected by Board"
-
-config UBICOM32_V3
- bool
- help
- Ubicom IP5xxx series processor support.
-
-config UBICOM32_V4
- bool
- help
- Ubicom IP7xxx series processor support.
-
-comment "Board"
-choice
- prompt "Board type"
- help
- Select your board.
-
-config NOBOARD
- bool "No board selected"
- help
- Default. Don't select any board specific config. Will not build unless you change!
-
-# Add your boards here
-source "arch/ubicom32/mach-ip5k/Kconfig"
-source "arch/ubicom32/mach-ip7k/Kconfig"
-
-endchoice
-
-comment "Kernel Options"
-config SMP
- bool "Symmetric multi-processing support"
- select USE_GENERIC_SMP_HELPERS
- default n
- help
- Enables multithreading support. Enabling SMP support increases
- the size of system data structures. SMP support can have either
- positive or negative impact on performance depending on workloads.
-
- If you do not know what to do here, say N.
-config OLD_40400010_SYSTEM_CALL
- bool "Provide old system call interface at 0x40400010"
- default y
- help
- Provides the old system call interface, does not affect the
- new system_call interface.
-
-config NR_CPUS
- int "Number of configured CPUs"
- range 2 32
- default 2
- depends on SMP
- help
- Upper bound on the number of CPUs. Space is reserved
- at compile time for this many CPUs.
-
-config LOCAL_TIMERS
- bool "Use local timer interrupts"
- depends on SMP
- default y
- help
- Enable support for local timers on SMP platforms, rather then the
- legacy IPI broadcast method. Local timers allows the system
- accounting to be spread across the timer interval, preventing a
- "thundering herd" at every timer tick. A physical timer is allocated
- per cpu.
-
-config TIMER_EXTRA_ALLOC
- int "Number of additional physical timer events to create"
- depends on GENERIC_CLOCKEVENTS
- default 0
- help
- The Ubicom32 processor has a number of event timers that can be wrapped
- in Linux clock event structures (assuming that the timers are not being
- used for another purpose). Based on the value of LOCAL_TIMERS, either
- 2 timers will be used or a timer will be used for every CPU. This value
- allows the programmer to select additional timers over that amount.
-
-config IRQSTACKS
- bool "Create separate stacks for interrupt handling"
- default n
- help
- Selecting this causes interrupts to be created on a separate
- stack instead of nesting the interrupts on the kernel stack.
-
-config IRQSTACKS_USEOCM
- bool "Use OCM for interrupt stacks"
- default n
- depends on IRQSTACKS
- help
- Selecting this cause the interrupt stacks to be placed in OCM
- reducing cache misses at the expense of using the OCM for servicing
- interrupts.
-
-menu "OCM Instruction Heap"
-
-config OCM_MODULES_RESERVATION
- int "OCM Instruction heap reservation. 0-192 kB"
- range 0 192
- default "0"
- help
- The minimum amount of OCM memory to reserve for kernel loadable module
- code. If you are not using this memory it cannot be used for anything
- else. Leave it as 0 if you have prebuilt modules that are compiled with
- OCM support.
-
-config OCM_MODULES_MAY_CONSUME_REMAINING_CODESPACE
- bool "Give all unused ocm code space to the ocm instruction heap."
- default n
- help
- Allow the OCM instruction heap allocation to consume any remaining
- unused OCM code space. The result of this is that you will not have
- and deterministic results, but you will not have any waste either.
-
-config OCM_MODULES_FALLBACK_TO_DDR
- bool "Loadable Modules requiring OCM may fallback to use DDR."
- default n
- help
- If a module cannot get the OCM code it requires allow DDR to
- be used instead.
-endmenu
-
-config HZ
- int "Frequency of 'jiffies' (for polling)"
- default 1000
- help
- 100 is common for embedded systems, but 1000 allows
- you to do more drivers without actually having
- interrupts working properly.
-
-comment "RAM configuration"
-
-config MIN_RAMSIZE
- hex "Minimum Size of RAM (in bytes)"
- range 0x01000000 0x08000000
- default "0x02000000"
- help
- Define the minimum acceptable size of the system
- RAM. Must be at least 16MB (0x01000000)
-
-comment "Build options"
-config LINKER_RELAXATION
- bool "Linker Relaxation"
- default y
- help
- Turns on linker relaxation that will produce smaller
- faster code. Increases link time.
-
-comment "Driver options"
-menu "PCI Bus"
-config PCI
- bool "PCI bus"
- default true
- help
- Enable/Disable PCI bus
- source "drivers/pci/Kconfig"
-
-
-config PCI_DEV0_IDSEL
- hex "slot 0 address"
- depends on PCI
- default "0x01000000"
- help
- Slot 0 address. This address should correspond to the address line
- which the IDSEL bit for this slot is connected to.
-
-config PCI_DEV1_IDSEL
- hex "slot 1 address"
- depends on PCI
- default "0x02000000"
- help
- Slot 1 address. This address should correspond to the address line
- which the IDSEL bit for this slot is connected to.
-endmenu
-# End PCI
-
-menu "Input devices"
-config UBICOM_INPUT
- bool "Ubicom polled GPIO input driver"
- select INPUT
- select INPUT_POLLDEV
- help
- Polling input driver, much like the GPIO input driver, except that it doesn't
- rely on interrupts. It will report events via the input subsystem.
- default n
-
-config UBICOM_INPUT_I2C
- bool "Ubicom polled GPIO input driver over I2C"
- select INPUT
- select INPUT_POLLDEV
- help
- Polling input driver, much like the PCA953x driver, it can support a variety of
- different I2C I/O expanders. This device polls the I2C I/O expander for events
- and reports them via the input subsystem.
- default n
-endmenu
-# Input devices
-
-source "arch/ubicom32/mach-common/Kconfig.switch"
-
-menu "Misc devices"
-config UBICOM_HID
- bool "Ubicom HID driver"
- select INPUT
- select INPUT_POLLDEV
- select LCD_CLASS_DEVICE
- help
- Driver for HID chip found on some Ubicom reference designs. This chip handles
- PWM, button input, and IR remote control. It registers as an input device and
- a backlight device.
- default n
-endmenu
-# Misc devices
-
-config CMDLINE_BOOL
- bool "Built-in kernel command line"
- default n
- help
- Allow for specifying boot arguments to the kernel at
- build time. On some systems (e.g. embedded ones), it is
- necessary or convenient to provide some or all of the
- kernel boot arguments with the kernel itself (that is,
- to not rely on the boot loader to provide them.)
-
- To compile command line arguments into the kernel,
- set this option to 'Y', then fill in the
- the boot arguments in CONFIG_CMDLINE.
-
- Systems with fully functional boot loaders (i.e. non-embedded)
- should leave this option set to 'N'.
-
-config CMDLINE
- string "Built-in kernel command string"
- depends on CMDLINE_BOOL
- default ""
- help
- Enter arguments here that should be compiled into the kernel
- image and used at boot time. If the boot loader provides a
- command line at boot time, it is appended to this string to
- form the full kernel command line, when the system boots.
-
- However, you can use the CONFIG_CMDLINE_OVERRIDE option to
- change this behavior.
-
- In most cases, the command line (whether built-in or provided
- by the boot loader) should specify the device for the root
- file system.
-
-config CMDLINE_OVERRIDE
- bool "Built-in command line overrides boot loader arguments"
- default n
- depends on CMDLINE_BOOL
- help
- Set this option to 'Y' to have the kernel ignore the boot loader
- command line, and use ONLY the built-in command line.
-
- This is used to work around broken boot loaders. This should
- be set to 'N' under normal conditions.
-
-endmenu
-# End Processor type and features
-
-source "arch/ubicom32/Kconfig.debug"
-
-menu "Executable file formats"
-source "fs/Kconfig.binfmt"
-endmenu
-
-source "init/Kconfig"
-source "kernel/Kconfig.preempt"
-source "kernel/time/Kconfig"
-source "mm/Kconfig"
-source "net/Kconfig"
-source "drivers/Kconfig"
-source "fs/Kconfig"
-source "security/Kconfig"
-source "crypto/Kconfig"
-source "lib/Kconfig"
+++ /dev/null
-menu "Kernel hacking"
-
-config TRACE_IRQFLAGS_SUPPORT
- def_bool y
-
-config DEBUG_VERBOSE
- bool "Verbose fault messages"
- default y
- select PRINTK
- help
- When a program crashes due to an exception, or the kernel detects
- an internal error, the kernel can print a not so brief message
- explaining what the problem was. This debugging information is
- useful to developers and kernel hackers when tracking down problems,
- but mostly meaningless to other people. This is always helpful for
- debugging but serves no purpose on a production system.
- Most people should say N here.
-
-config PROTECT_KERNEL
- default y
- bool 'Enable Kernel range register Protection'
- help
- Adds code to enable/disable range registers to protect static
- kernel code/data from userspace. Currently the ranges covered
- do no protect kernel loadable modules or dynamically allocated
- kernel data.
-
-config NO_KERNEL_MSG
- bool "Suppress Kernel BUG Messages"
- help
- Do not output any debug BUG messages within the kernel.
-
-config EARLY_PRINTK
- bool "Use the driver that you selected as console also for early printk (to debug kernel bootup)."
- default n
- help
- If you want to use the serdes driver (console=ttyUS0) for
- early printk, you must also supply an additional kernel boot
- parameter like this:
-
- serdes=ioportaddr,irq,clockrate,baud
-
- For an IP7160RGW eval board, you could use this:
-
- serdes=0x2004000,61,250000000,57600
-
- which will let you see early printk output at 57600 baud.
-
-config STOP_ON_TRAP
- bool "Enable stopping at the LDSR for all traps"
- default n
- help
- Cause the LDSR to stop all threads whenever a trap is about to be serviced
-
-config STOP_ON_BUG
- bool "Enable stopping on failed BUG_ON()"
- default n
- help
- Cause all BUG_ON failures to stop all threads
-
-config DEBUG_IRQMEASURE
- bool "Enable IRQ handler measurements"
- default n
- help
- When enabled each IRQ's min/avg/max times will be printed. If the handler
- re-enables interrupt, the times will show the full time including to service
- nested interrupts. See /proc/irq_measurements.
-
-config DEBUG_PCIMEASURE
- bool "Enable PCI transaction measurements"
- default n
- help
- When enabled the system will measure the min/avg/max timer for each PCI transactions.
- See /proc/pci_measurements.
-
-config ACCESS_OK_CHECKS_ENABLED
- bool "Enable user space access checks"
- default n
- help
- Enabling this check causes the kernel to verify that addresses passed
- to the kernel by the user space code are within the processes
- address space. On a no-mmu system, this is done by examining the
- processes memory data structures (adversly affecting performance) but
- ensuring that a process does not ask the kernel to violate another
- processes address space. Sadly, the kernel uses access_ok() for
- address that are in the kernel which results in a large volume of
- false positives.
-
-choice
- prompt "Unaligned Access Support"
- default UNALIGNED_ACCESS_ENABLED
- help
- Kernel / Userspace unaligned access handling.
-
-config UNALIGNED_ACCESS_ENABLED
- bool "Kernel and Userspace"
- help
-
-config UNALIGNED_ACCESS_USERSPACE_ONLY
- bool "Userspace Only"
- help
-
-config UNALIGNED_ACCESS_DISABLED
- bool "Disabled"
- help
-
-endchoice
-
-config DEBUG_STACKOVERFLOW
- bool "Check for stack overflows"
- default n
- depends on DEBUG_KERNEL
- help
- This option will cause messages to be printed if free kernel stack space
- drops below a certain limit (THREAD_SIZE /8).
-
-config DEBUG_STACK_USAGE
- bool "Stack utilization instrumentation"
- default n
- depends on DEBUG_KERNEL
- help
- Enables the display of the minimum amount of free kernel stack which each
- task has ever had available in the sysrq-T and sysrq-P debug output.
-
- This option will slow down process creation somewhat.
-
-source "lib/Kconfig.debug"
-
-endmenu
+++ /dev/null
-#
-# arch/ubicom32/Makefile
-# <TODO: Replace with short file description>
-#
-# (C) Copyright 2009, Ubicom, Inc.
-#
-# This file is part of the Ubicom32 Linux Kernel Port.
-#
-# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-# it and/or modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation, either version 2 of the
-# License, or (at your option) any later version.
-#
-# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with the Ubicom32 Linux Kernel Port. If not,
-# see <http://www.gnu.org/licenses/>.
-#
-# Ubicom32 implementation derived from (with many thanks):
-# arch/m68knommu
-# arch/blackfin
-# arch/parisc
-#
-
-KBUILD_DEFCONFIG :=
-
-# setup the machine name and machine dependent settings
-machine-$(CONFIG_UBICOM32_V3) := ip5k
-machine-$(CONFIG_UBICOM32_V4) := ip7k
-MACHINE := $(machine-y)
-export MACHINE
-
-model-$(CONFIG_RAMKERNEL) := ram
-model-$(CONFIG_ROMKERNEL) := rom
-MODEL := $(model-y)
-export MODEL
-
-CPUCLASS := $(cpuclass-y)
-
-export CPUCLASS
-
-#
-# We want the core kernel built using the fastcall ABI but modules need
-# to be built using the slower calling convention because they could be
-# loaded out of range for fast calls.
-#
-CFLAGS_KERNEL += -mfastcall
-CFLAGS_MODULE += -mno-fastcall
-
-#
-# Some CFLAG additions based on specific CPU type.
-#
-cflags-$(CONFIG_UBICOM32_V3) := -march=ubicom32v3 -DIP5000
-cflags-$(CONFIG_UBICOM32_V4) := -march=ubicom32v4 -DIP7000
-
-ldflags-$(CONFIG_LINKER_RELAXATION) := --relax
-LDFLAGS_vmlinux := $(ldflags-y)
-
-GCCLIBDIR := $(dir $(shell $(CC) $(cflags-y) -print-libgcc-file-name))
-GCC_LIBS := $(GCCLIBDIR)/libgcc.a
-
-KBUILD_CFLAGS += $(cflags-y) -ffunction-sections
-KBUILD_AFLAGS += $(cflags-y)
-
-KBUILD_CFLAGS += -D__linux__ -Dlinux
-KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
-
-# include any machine specific directory
-ifneq ($(machine-y),)
-core-y += arch/$(ARCH)/mach-$(MACHINE)/
-endif
-
-head-y := arch/$(ARCH)/kernel/head.o
-
-core-y += arch/$(ARCH)/kernel/ \
- arch/$(ARCH)/mm/ \
- arch/$(ARCH)/crypto/ \
- arch/$(ARCH)/mach-common/
-
-drivers-$(CONFIG_OPROFILE) += arch/ubicom32/oprofile/
-
-libs-y += arch/$(ARCH)/lib/
-libs-y += $(GCC_LIBS)
-
-archclean:
-
-# make sure developer has selected a valid board
-ifeq ($(CONFIG_NOBOARD),y)
-# $(error have to select a valid board file $(CONFIG_NOBOARD), please run kernel config again)
-_all: config_board_error
-endif
-
-config_board_error:
- @echo "*************************************************"
- @echo "You have not selected a proper board."
- @echo "Please run menuconfig (or config) against your"
- @echo "kernel and choose your board under Processor"
- @echo "options"
- @echo "*************************************************"
- @exit 1
+++ /dev/null
-#
-# arch/ubicom32/crypto/Makefile
-# <TODO: Replace with short file description>
-#
-# (C) Copyright 2009, Ubicom, Inc.
-#
-# This file is part of the Ubicom32 Linux Kernel Port.
-#
-# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-# it and/or modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation, either version 2 of the
-# License, or (at your option) any later version.
-#
-# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with the Ubicom32 Linux Kernel Port. If not,
-# see <http://www.gnu.org/licenses/>.
-#
-# Ubicom32 implementation derived from (with many thanks):
-# arch/m68knommu
-# arch/blackfin
-# arch/parisc
-#
-obj-$(CONFIG_CRYPTO_UBICOM32) += crypto_ubicom32.o
-obj-$(CONFIG_CRYPTO_AES_UBICOM32) += aes_ubicom32.o
-obj-$(CONFIG_CRYPTO_DES_UBICOM32) += des.o
-obj-$(CONFIG_CRYPTO_MD5_UBICOM32) += md5.o
-obj-$(CONFIG_CRYPTO_SHA1_UBICOM32) += sha1.o
-
-des-y := des_ubicom32.o des_check_key.o
-md5-y := md5_ubicom32.o md5_ubicom32_asm.o
-sha1-y := sha1_ubicom32.o
+++ /dev/null
-/*
- * arch/ubicom32/crypto/aes_ubicom32.c
- * Ubicom32 implementation of the AES Cipher Algorithm.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <crypto/aes.h>
-#include <crypto/algapi.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include "crypto_ubicom32.h"
-#include <asm/linkage.h>
-
-struct ubicom32_aes_ctx {
- u8 key[AES_MAX_KEY_SIZE];
- u32 ctrl;
- int key_len;
-};
-
-static inline void aes_hw_set_key(const u8 *key, u8 key_len)
-{
- /*
- * switch case has more overhead than 4 move.4 instructions, so just copy 256 bits
- */
- SEC_SET_KEY_256(key);
-}
-
-static inline void aes_hw_set_iv(const u8 *iv)
-{
- SEC_SET_IV_4W(iv);
-}
-
-static inline void aes_hw_cipher(u8 *out, const u8 *in)
-{
- SEC_SET_INPUT_4W(in);
-
- asm volatile (
- " ; start AES by writing 0x40(SECURITY_BASE) \n\t"
- " move.4 0x40(%0), #0x01 \n\t"
- " pipe_flush 0 \n\t"
- " \n\t"
- " ; wait for the module to calculate the output \n\t"
- " btst 0x04(%0), #0 \n\t"
- " jmpne.f .-4 \n\t"
- :
- : "a" (SEC_BASE)
- : "cc"
- );
-
- SEC_GET_OUTPUT_4W(out);
-}
-
-static int __ocm_text aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
- unsigned int key_len)
-{
- struct ubicom32_aes_ctx *uctx = crypto_tfm_ctx(tfm);
-
- uctx->key_len = key_len;
- memcpy(uctx->key, in_key, key_len);
-
- /*
- * leave out HASH_ALG (none = 0), CBC (no = 0), DIR (unknown) yet
- */
- switch (uctx->key_len) {
- case 16:
- uctx->ctrl = SEC_KEY_128_BITS | SEC_ALG_AES;
- break;
- case 24:
- uctx->ctrl = SEC_KEY_192_BITS | SEC_ALG_AES;
- break;
- case 32:
- uctx->ctrl = SEC_KEY_256_BITS | SEC_ALG_AES;
- break;
- }
-
- return 0;
-}
-
-static inline void aes_cipher(struct crypto_tfm *tfm, u8 *out, const u8 *in, u32 extra_flags)
-{
- const struct ubicom32_aes_ctx *uctx = crypto_tfm_ctx(tfm);
-
- hw_crypto_lock();
- hw_crypto_check();
- hw_crypto_set_ctrl(uctx->ctrl | extra_flags);
-
- aes_hw_set_key(uctx->key, uctx->key_len);
- aes_hw_cipher(out, in);
-
- hw_crypto_unlock();
-}
-
-static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
-{
- aes_cipher(tfm, out, in, SEC_DIR_ENCRYPT);
-}
-
-static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
-{
- aes_cipher(tfm, out, in, SEC_DIR_DECRYPT);
-}
-
-static struct crypto_alg aes_alg = {
- .cra_name = "aes",
- .cra_driver_name = "aes-ubicom32",
- .cra_priority = CRYPTO_UBICOM32_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
- .cra_blocksize = AES_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct ubicom32_aes_ctx),
- .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(aes_alg.cra_list),
- .cra_u = {
- .cipher = {
- .cia_min_keysize = AES_MIN_KEY_SIZE,
- .cia_max_keysize = AES_MAX_KEY_SIZE,
- .cia_setkey = aes_set_key,
- .cia_encrypt = aes_encrypt,
- .cia_decrypt = aes_decrypt,
- }
- }
-};
-
-static void __ocm_text ecb_aes_crypt_loop(u8 *out, u8 *in, unsigned int n)
-{
- while (likely(n)) {
- aes_hw_cipher(out, in);
- out += AES_BLOCK_SIZE;
- in += AES_BLOCK_SIZE;
- n -= AES_BLOCK_SIZE;
- }
-}
-
-static int __ocm_text ecb_aes_crypt(struct blkcipher_desc *desc, struct scatterlist *dst,
- struct scatterlist *src, unsigned int nbytes, u32 extra_flags)
-{
- const struct ubicom32_aes_ctx *uctx = crypto_blkcipher_ctx(desc->tfm);
- int ret;
-
- struct blkcipher_walk walk;
- blkcipher_walk_init(&walk, dst, src, nbytes);
- ret = blkcipher_walk_virt(desc, &walk);
- if (ret) {
- return ret;
- }
-
- hw_crypto_lock();
- hw_crypto_check();
-
- hw_crypto_set_ctrl(uctx->ctrl | extra_flags);
- aes_hw_set_key(uctx->key, uctx->key_len);
-
- while (likely((nbytes = walk.nbytes))) {
- /* only use complete blocks */
- unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1);
- u8 *out = walk.dst.virt.addr;
- u8 *in = walk.src.virt.addr;
-
- /* finish n/16 blocks */
- ecb_aes_crypt_loop(out, in, n);
-
- nbytes &= AES_BLOCK_SIZE - 1;
- ret = blkcipher_walk_done(desc, &walk, nbytes);
- }
-
- hw_crypto_unlock();
- return ret;
-}
-
-static int ecb_aes_encrypt(struct blkcipher_desc *desc,
- struct scatterlist *dst, struct scatterlist *src,
- unsigned int nbytes)
-{
- return ecb_aes_crypt(desc, dst, src, nbytes, SEC_DIR_ENCRYPT);
-}
-
-static int ecb_aes_decrypt(struct blkcipher_desc *desc,
- struct scatterlist *dst, struct scatterlist *src,
- unsigned int nbytes)
-{
- return ecb_aes_crypt(desc, dst, src, nbytes, SEC_DIR_DECRYPT);
-}
-
-static struct crypto_alg ecb_aes_alg = {
- .cra_name = "ecb(aes)",
- .cra_driver_name = "ecb-aes-ubicom32",
- .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
- .cra_blocksize = AES_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct ubicom32_aes_ctx),
- .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
- .cra_type = &crypto_blkcipher_type,
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(ecb_aes_alg.cra_list),
- .cra_u = {
- .blkcipher = {
- .min_keysize = AES_MIN_KEY_SIZE,
- .max_keysize = AES_MAX_KEY_SIZE,
- .setkey = aes_set_key,
- .encrypt = ecb_aes_encrypt,
- .decrypt = ecb_aes_decrypt,
- }
- }
-};
-
-#if CRYPTO_UBICOM32_LOOP_ASM
-void __ocm_text cbc_aes_encrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n)
-{
- asm volatile (
- "; set init. iv 4w \n\t"
- " move.4 0x50(%0), 0x0(%3) \n\t"
- " move.4 0x54(%0), 0x4(%3) \n\t"
- " move.4 0x58(%0), 0x8(%3) \n\t"
- " move.4 0x5c(%0), 0xc(%3) \n\t"
- " \n\t"
- "; we know n > 0, so we can always \n\t"
- "; load the first block \n\t"
- "; set input 4w \n\t"
- " move.4 0x30(%0), 0x0(%2) \n\t"
- " move.4 0x34(%0), 0x4(%2) \n\t"
- " move.4 0x38(%0), 0x8(%2) \n\t"
- " move.4 0x3c(%0), 0xc(%2) \n\t"
- " \n\t"
- "; kickoff hw \n\t"
- " move.4 0x40(%0), %2 \n\t"
- " \n\t"
- "; update n & flush \n\t"
- " add.4 %4, #-16, %4 \n\t"
- " pipe_flush 0 \n\t"
- " \n\t"
- "; while (n): work on 2nd block \n\t"
- " 1: lsl.4 d15, %4, #0x0 \n\t"
- " jmpeq.f 5f \n\t"
- " \n\t"
- "; set input 4w (2nd) \n\t"
- " move.4 0x30(%0), 0x10(%2) \n\t"
- " move.4 0x34(%0), 0x14(%2) \n\t"
- " move.4 0x38(%0), 0x18(%2) \n\t"
- " move.4 0x3c(%0), 0x1c(%2) \n\t"
- " \n\t"
- "; update n/in asap while waiting \n\t"
- " add.4 %4, #-16, %4 \n\t"
- " move.4 d15, 16(%2)++ \n\t"
- " \n\t"
- "; wait for the previous output \n\t"
- " btst 0x04(%0), #0 \n\t"
- " jmpne.f -4 \n\t"
- " \n\t"
- "; read previous output \n\t"
- " move.4 0x0(%1), 0x50(%0) \n\t"
- " move.4 0x4(%1), 0x54(%0) \n\t"
- " move.4 0x8(%1), 0x58(%0) \n\t"
- " move.4 0xc(%1), 0x5c(%0) \n\t"
- " \n\t"
- "; kick off hw for 2nd input \n\t"
- " move.4 0x40(%0), %2 \n\t"
- " \n\t"
- "; update out asap \n\t"
- " move.4 d15, 16(%1)++ \n\t"
- " \n\t"
- "; go back to loop \n\t"
- " jmpt 1b \n\t"
- " \n\t"
- "; wait for last output \n\t"
- " 5: btst 0x04(%0), #0 \n\t"
- " jmpne.f -4 \n\t"
- " \n\t"
- "; read last output \n\t"
- " move.4 0x0(%1), 0x50(%0) \n\t"
- " move.4 0x4(%1), 0x54(%0) \n\t"
- " move.4 0x8(%1), 0x58(%0) \n\t"
- " move.4 0xc(%1), 0x5c(%0) \n\t"
- " \n\t"
- "; copy out iv \n\t"
- " move.4 0x0(%3), 0x50(%0) \n\t"
- " move.4 0x4(%3), 0x54(%0) \n\t"
- " move.4 0x8(%3), 0x58(%0) \n\t"
- " move.4 0xc(%3), 0x5c(%0) \n\t"
- " \n\t"
- :
- : "a" (SEC_BASE), "a" (out), "a" (in), "a" (iv), "d" (n)
- : "d15", "cc"
- );
-}
-
-#else
-
-static void __ocm_text cbc_aes_encrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n)
-{
- aes_hw_set_iv(iv);
- while (likely(n)) {
- aes_hw_cipher(out, in);
- out += AES_BLOCK_SIZE;
- in += AES_BLOCK_SIZE;
- n -= AES_BLOCK_SIZE;
- }
- SEC_COPY_4W(iv, out - AES_BLOCK_SIZE);
-}
-
-#endif
-
-static void __ocm_text cbc_aes_decrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n)
-{
- while (likely(n)) {
- aes_hw_set_iv(iv);
- SEC_COPY_4W(iv, in);
- aes_hw_cipher(out, in);
- out += AES_BLOCK_SIZE;
- in += AES_BLOCK_SIZE;
- n -= AES_BLOCK_SIZE;
- }
-}
-
-static int __ocm_text cbc_aes_crypt(struct blkcipher_desc *desc,
- struct scatterlist *dst, struct scatterlist *src,
- unsigned int nbytes, u32 extra_flags)
-{
- struct ubicom32_aes_ctx *uctx = crypto_blkcipher_ctx(desc->tfm);
- int ret;
-
- struct blkcipher_walk walk;
- blkcipher_walk_init(&walk, dst, src, nbytes);
- ret = blkcipher_walk_virt(desc, &walk);
- if (unlikely(ret)) {
- return ret;
- }
-
- hw_crypto_lock();
- hw_crypto_check();
-
- hw_crypto_set_ctrl(uctx->ctrl | extra_flags);
- aes_hw_set_key(uctx->key, uctx->key_len);
-
- while (likely((nbytes = walk.nbytes))) {
- /* only use complete blocks */
- unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1);
- if (likely(n)) {
- u8 *out = walk.dst.virt.addr;
- u8 *in = walk.src.virt.addr;
-
- if (extra_flags & SEC_DIR_ENCRYPT) {
- cbc_aes_encrypt_loop(out, in, walk.iv, n);
- } else {
- cbc_aes_decrypt_loop(out, in, walk.iv, n);
- }
- }
-
- nbytes &= AES_BLOCK_SIZE - 1;
- ret = blkcipher_walk_done(desc, &walk, nbytes);
- }
- hw_crypto_unlock();
-
- return ret;
-}
-
-static int __ocm_text cbc_aes_encrypt(struct blkcipher_desc *desc,
- struct scatterlist *dst, struct scatterlist *src,
- unsigned int nbytes)
-{
- return cbc_aes_crypt(desc, dst, src, nbytes, SEC_DIR_ENCRYPT | SEC_CBC_SET);
-}
-
-static int __ocm_text cbc_aes_decrypt(struct blkcipher_desc *desc,
- struct scatterlist *dst, struct scatterlist *src,
- unsigned int nbytes)
-{
- return cbc_aes_crypt(desc, dst, src, nbytes, SEC_DIR_DECRYPT | SEC_CBC_SET);
-}
-
-static struct crypto_alg cbc_aes_alg = {
- .cra_name = "cbc(aes)",
- .cra_driver_name = "cbc-aes-ubicom32",
- .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
- .cra_blocksize = AES_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct ubicom32_aes_ctx),
- .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
- .cra_type = &crypto_blkcipher_type,
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(cbc_aes_alg.cra_list),
- .cra_u = {
- .blkcipher = {
- .min_keysize = AES_MIN_KEY_SIZE,
- .max_keysize = AES_MAX_KEY_SIZE,
- .ivsize = AES_BLOCK_SIZE,
- .setkey = aes_set_key,
- .encrypt = cbc_aes_encrypt,
- .decrypt = cbc_aes_decrypt,
- }
- }
-};
-
-static int __init aes_init(void)
-{
- int ret;
-
- hw_crypto_init();
-
- ret = crypto_register_alg(&aes_alg);
- if (ret)
- goto aes_err;
-
- ret = crypto_register_alg(&ecb_aes_alg);
- if (ret)
- goto ecb_aes_err;
-
- ret = crypto_register_alg(&cbc_aes_alg);
- if (ret)
- goto cbc_aes_err;
-
-out:
- return ret;
-
-cbc_aes_err:
- crypto_unregister_alg(&ecb_aes_alg);
-ecb_aes_err:
- crypto_unregister_alg(&aes_alg);
-aes_err:
- goto out;
-}
-
-static void __exit aes_fini(void)
-{
- crypto_unregister_alg(&cbc_aes_alg);
- crypto_unregister_alg(&ecb_aes_alg);
- crypto_unregister_alg(&aes_alg);
-}
-
-module_init(aes_init);
-module_exit(aes_fini);
-
-MODULE_ALIAS("aes");
-
-MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * arch/ubicom32/crypto/crypto_des.h
- * Function for checking keys for the DES and Triple DES Encryption
- * algorithms.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef __CRYPTO_DES_H__
-#define __CRYPTO_DES_H__
-
-extern int crypto_des_check_key(const u8*, unsigned int, u32*);
-
-#endif /* __CRYPTO_DES_H__ */
+++ /dev/null
-/*
- * arch/ubicom32/crypto/crypto_ubicom32.c
- * Generic code to support ubicom32 hardware crypto accelerator
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include "crypto_ubicom32.h"
-
-spinlock_t crypto_ubicom32_lock;
-bool crypto_ubicom32_inited = false;
-volatile bool crypto_ubicom32_on = false;
-volatile unsigned long crypto_ubicom32_last_use;
-
-struct timer_list crypto_ubicom32_ps_timer;
-void crypto_ubicom32_ps_check(unsigned long data)
-{
- unsigned long idle_time = msecs_to_jiffies(HW_CRYPTO_PS_MAX_IDLE_MS);
-
- BUG_ON(!crypto_ubicom32_on);
-
- if (((jiffies - crypto_ubicom32_last_use) > idle_time) && spin_trylock_bh(&crypto_ubicom32_lock)) {
- hw_crypto_turn_off();
- spin_unlock_bh(&crypto_ubicom32_lock);
- return;
- }
-
- /* keep monitoring */
- hw_crypto_ps_start();
-}
+++ /dev/null
-/*
- * arch/ubicom32/crypto/crypto_ubicom32.h
- * Support for Ubicom32 cryptographic instructions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _CRYPTO_ARCH_UBICOM32_CRYPT_H
-#define _CRYPTO_ARCH_UBICOM32_CRYPT_H
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-#include <asm/ip5000.h>
-
-#define CRYPTO_UBICOM32_LOOP_ASM 1
-#define CRYPTO_UBICOM32_ALIGNMENT 4
-#define SEC_ALIGNED(p) (((u32)p & 3) == 0)
-
-#define SEC_BASE SECURITY_BASE
-#define SEC_KEY_OFFSET SECURITY_KEY_VALUE(0)
-#define SEC_INPUT_OFFSET SECURITY_KEY_IN(0)
-#define SEC_OUTPUT_OFFSET SECURITY_KEY_OUT(0)
-#define SEC_HASH_OFFSET SECURITY_KEY_HASH(0)
-
-#define SEC_KEY_128_BITS SECURITY_CTRL_KEY_SIZE(0)
-#define SEC_KEY_192_BITS SECURITY_CTRL_KEY_SIZE(1)
-#define SEC_KEY_256_BITS SECURITY_CTRL_KEY_SIZE(2)
-
-#define SEC_HASH_NONE SECURITY_CTRL_HASH_ALG_NONE
-#define SEC_HASH_MD5 SECURITY_CTRL_HASH_ALG_MD5
-#define SEC_HASH_SHA1 SECURITY_CTRL_HASH_ALG_SHA1
-
-#define SEC_CBC_SET SECURITY_CTRL_CBC
-#define SEC_CBC_NONE 0
-
-#define SEC_ALG_AES SECURITY_CTRL_CIPHER_ALG_AES
-#define SEC_ALG_NONE SECURITY_CTRL_CIPHER_ALG_NONE
-#define SEC_ALG_DES SECURITY_CTRL_CIPHER_ALG_DES
-#define SEC_ALG_3DES SECURITY_CTRL_CIPHER_ALG_3DES
-
-#define SEC_DIR_ENCRYPT SECURITY_CTRL_ENCIPHER
-#define SEC_DIR_DECRYPT 0
-
-#define CRYPTO_UBICOM32_PRIORITY 300
-#define CRYPTO_UBICOM32_COMPOSITE_PRIORITY 400
-
-#define HW_CRYPTO_PS_MAX_IDLE_MS 100 /* idle time (ms) before shuting down sm */
-
-extern spinlock_t crypto_ubicom32_lock;
-extern bool crypto_ubicom32_inited;
-extern volatile bool crypto_ubicom32_on;
-extern volatile unsigned long crypto_ubicom32_last_use;
-extern struct timer_list crypto_ubicom32_ps_timer;
-extern void crypto_ubicom32_ps_check(unsigned long data);
-
-#define SEC_COPY_2W(t, s) \
- asm volatile ( \
- " move.4 0(%0), 0(%1) \n\t" \
- " move.4 4(%0), 4(%1) \n\t" \
- \
- : \
- : "a" (t), "a" (s) \
- )
-
-#define SEC_COPY_4W(t, s) \
- asm volatile ( \
- " move.4 0(%0), 0(%1) \n\t" \
- " move.4 4(%0), 4(%1) \n\t" \
- " move.4 8(%0), 8(%1) \n\t" \
- " move.4 12(%0), 12(%1) \n\t" \
- : \
- : "a" (t), "a" (s) \
- )
-
-#define SEC_COPY_5W(t, s) \
- asm volatile ( \
- " move.4 0(%0), 0(%1) \n\t" \
- " move.4 4(%0), 4(%1) \n\t" \
- " move.4 8(%0), 8(%1) \n\t" \
- " move.4 12(%0), 12(%1) \n\t" \
- " move.4 16(%0), 16(%1) \n\t" \
- : \
- : "a" (t), "a" (s) \
- )
-
-#define SEC_SET_KEY_2W(x) \
- asm volatile ( \
- " ; write key to Security Keyblock \n\t" \
- " move.4 0x10(%0), 0(%1) \n\t" \
- " move.4 0x14(%0), 4(%1) \n\t" \
- : \
- : "a" (SECURITY_BASE), "a" (x) \
- )
-
-#define SEC_SET_KEY_4W(x) \
- asm volatile ( \
- " ; write key to Security Keyblock \n\t" \
- " move.4 0x10(%0), 0(%1) \n\t" \
- " move.4 0x14(%0), 4(%1) \n\t" \
- " move.4 0x18(%0), 8(%1) \n\t" \
- " move.4 0x1c(%0), 12(%1) \n\t" \
- : \
- : "a"(SECURITY_BASE), "a"(x) \
- )
-
-#define SEC_SET_KEY_6W(x) \
- asm volatile ( \
- " ; write key to Security Keyblock \n\t" \
- " move.4 0x10(%0), 0(%1) \n\t" \
- " move.4 0x14(%0), 4(%1) \n\t" \
- " move.4 0x18(%0), 8(%1) \n\t" \
- " move.4 0x1c(%0), 12(%1) \n\t" \
- " move.4 0x20(%0), 16(%1) \n\t" \
- " move.4 0x24(%0), 20(%1) \n\t" \
- : \
- : "a" (SECURITY_BASE), "a" (x) \
- )
-
-#define SEC_SET_KEY_8W(x) \
- asm volatile ( \
- " ; write key to Security Keyblock \n\t" \
- " move.4 0x10(%0), 0(%1) \n\t" \
- " move.4 0x14(%0), 4(%1) \n\t" \
- " move.4 0x18(%0), 8(%1) \n\t" \
- " move.4 0x1c(%0), 12(%1) \n\t" \
- " move.4 0x20(%0), 16(%1) \n\t" \
- " move.4 0x24(%0), 20(%1) \n\t" \
- " move.4 0x28(%0), 24(%1) \n\t" \
- " move.4 0x2c(%0), 28(%1) \n\t" \
- : \
- : "a" (SECURITY_BASE), "a" (x) \
- )
-
-#define SEC_SET_KEY_64(k) SEC_SET_KEY_2W(k)
-#define SEC_SET_KEY_128(k) SEC_SET_KEY_4W(k)
-#define SEC_SET_KEY_192(k) SEC_SET_KEY_6W(k)
-#define SEC_SET_KEY_256(k) SEC_SET_KEY_8W(k)
-
-#define DES_SET_KEY(x) SEC_SET_KEY_64(x)
-#define DES3_SET_KEY(x) SEC_SET_KEY_192(x)
-
-#define SEC_SET_INPUT_2W(x) \
- asm volatile ( \
- " ; write key to Security Keyblock \n\t" \
- " move.4 0x30(%0), 0(%1) \n\t" \
- " move.4 0x34(%0), 4(%1) \n\t" \
- : \
- : "a" (SECURITY_BASE), "a" (x) \
- )
-
-#define SEC_GET_OUTPUT_2W(x) \
- asm volatile ( \
- " ; write key to Security Keyblock \n\t" \
- " move.4 0(%1), 0x50(%0) \n\t" \
- " move.4 4(%1), 0x54(%0) \n\t" \
- : \
- : "a" (SECURITY_BASE), "a" (x) \
- )
-
-#define SEC_SET_INPUT_4W(x) \
- asm volatile ( \
- " ; write key to Security Keyblock \n\t" \
- " move.4 0x30(%0), 0(%1) \n\t" \
- " move.4 0x34(%0), 4(%1) \n\t" \
- " move.4 0x38(%0), 8(%1) \n\t" \
- " move.4 0x3c(%0), 12(%1) \n\t" \
- : \
- : "a" (SECURITY_BASE), "a" (x) \
- )
-
-#define SEC_GET_OUTPUT_4W(x) \
- asm volatile ( \
- " ; read output from Security Keyblock \n\t" \
- " move.4 0(%1), 0x50(%0) \n\t" \
- " move.4 4(%1), 0x54(%0) \n\t" \
- " move.4 8(%1), 0x58(%0) \n\t" \
- " move.4 12(%1), 0x5c(%0) \n\t" \
- : \
- : "a" (SECURITY_BASE), "a" (x) \
- )
-
-#define SEC_SET_IV_4W(x) \
- asm volatile ( \
- " ; write IV to Security Keyblock \n\t" \
- " move.4 0x50(%0), 0(%1) \n\t" \
- " move.4 0x54(%0), 4(%1) \n\t" \
- " move.4 0x58(%0), 8(%1) \n\t" \
- " move.4 0x5c(%0), 12(%1) \n\t" \
- : \
- : "a" (SECURITY_BASE), "a" (x) \
- )
-
-#define SEC_PIPE_FLUSH() asm volatile ( " pipe_flush 0 \n\t" )
-
-static inline void hw_crypto_set_ctrl(uint32_t c)
-{
- asm volatile (
- " move.4 0(%0), %1 \n\t"
- :
- : "a" (SECURITY_BASE + SECURITY_CTRL), "d" (c)
- );
-}
-
-static inline void hw_crypto_ps_start(void)
-{
- crypto_ubicom32_ps_timer.expires = jiffies + msecs_to_jiffies(HW_CRYPTO_PS_MAX_IDLE_MS >> 1);
- add_timer(&crypto_ubicom32_ps_timer);
-}
-
-static inline void hw_crypto_turn_on(void)
-{
- asm volatile (
- " moveai A4, %0 \n\t"
- " bset 0x0(A4), 0x0(A4), %1 \n\t"
- " cycles 11 \n\t"
- :
- : "i" (OCP_BASE >> 7), "i" (GEN_CLK_PLL_SECURITY_BIT_NO)
- : "a4", "cc"
- );
- crypto_ubicom32_on = true;
-}
-
-static inline void hw_crypto_turn_off(void)
-{
- asm volatile (
- " moveai A4, %0 \n\t"
- " bclr 0x0(A4), 0x0(A4), %1 \n\t"
- :
- : "i" (OCP_BASE >> 7), "i" (GEN_CLK_PLL_SECURITY_BIT_NO)
- : "a4", "cc"
- );
- crypto_ubicom32_on = false;
-}
-
-/*
- * hw_crypto_check
- * Most probably hw crypto is called in clusters and it makes no sense to turn it off
- * and on and waster 13 cycles every time.
- */
-static inline void hw_crypto_check(void)
-{
- if (likely(crypto_ubicom32_on)) {
- return;
- }
- crypto_ubicom32_last_use = jiffies;
- hw_crypto_turn_on();
- hw_crypto_ps_start();
-}
-
-/*
- * hw_crypto_ps_init
- * Init power save timer
- */
-static inline void hw_crypto_ps_init(void)
-{
- init_timer_deferrable(&crypto_ubicom32_ps_timer);
- crypto_ubicom32_ps_timer.function = crypto_ubicom32_ps_check;
- crypto_ubicom32_ps_timer.data = 0;
-}
-
-/*
- * hw_crypto_init()
- * Initialize OCP security module lock and disables its clock.
- */
-static inline void hw_crypto_init(void)
-{
- if (!crypto_ubicom32_inited) {
- crypto_ubicom32_inited = true;
- spin_lock_init(&crypto_ubicom32_lock);
- hw_crypto_ps_init();
- hw_crypto_turn_off();
- }
-}
-
-/*
- * hw_crypto_lock()
- * Locks the OCP security module and enables its clock.
- */
-static inline void hw_crypto_lock(void)
-{
- spin_lock_bh(&crypto_ubicom32_lock);
-}
-
-/*
- * hw_crypto_unlock()
- * Unlocks the OCP security module and disables its clock.
- */
-static inline void hw_crypto_unlock(void)
-{
- crypto_ubicom32_last_use = jiffies;
- spin_unlock_bh(&crypto_ubicom32_lock);
-}
-
-#define CONFIG_CRYPTO_UBICOM32_DEBUG 1
-
-#ifdef CONFIG_CRYPTO_UBICOM32_DEBUG
-static inline void hex_dump(void *buf, int b_size, const char *msg)
-{
- u8 *b = (u8 *)buf;
- int i;
- if (msg) {
- printk("%s:\t", msg);
- }
-
- for (i=0; i < b_size; i++) {
- printk("%02x ", b[i]);
- if ((i & 3) == 3) {
- printk(" ");
- }
- if ((i & 31) == 31) {
- printk("\n");
- }
- }
- printk("\n");
-}
-#define UBICOM32_SEC_DUMP(a, b, c) hex_dump(a, b, c)
-#else
-#define UBICOM32_SEC_DUMP(a, b, c)
-#endif
-
-#endif /* _CRYPTO_ARCH_UBICOM32_CRYPT_H */
+++ /dev/null
-/*
- * arch/ubicom32/crypto/des_check_key.c
- * Ubicom32 architecture function for checking keys for the DES and
- * Tripple DES Encryption algorithms.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * Originally released as descore by Dana L. How <how@isl.stanford.edu>.
- * Modified by Raimar Falke <rf13@inf.tu-dresden.de> for the Linux-Kernel.
- * Derived from Cryptoapi and Nettle implementations, adapted for in-place
- * scatterlist interface. Changed LGPL to GPL per section 3 of the LGPL.
- *
- * s390 Version:
- * Copyright IBM Corp. 2003
- * Author(s): Thomas Spatzier
- * Jan Glauber (jan.glauber@de.ibm.com)
- *
- * Derived from "crypto/des.c"
- * Copyright (c) 1992 Dana L. How.
- * Copyright (c) Raimar Falke <rf13@inf.tu-dresden.de>
- * Copyright (c) Gisle Sflensminde <gisle@ii.uib.no>
- * Copyright (C) 2001 Niels Mvller.
- * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/crypto.h>
-#include "crypto_des.h"
-
-#define ROR(d,c,o) ((d) = (d) >> (c) | (d) << (o))
-
-static const u8 parity[] = {
- 8,1,0,8,0,8,8,0,0,8,8,0,8,0,2,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,3,
- 0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,
- 0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,
- 8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,
- 0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,
- 8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,
- 8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,
- 4,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,5,0,8,0,8,8,0,0,8,8,0,8,0,6,8,
-};
-
-/*
- * RFC2451: Weak key checks SHOULD be performed.
- */
-int
-crypto_des_check_key(const u8 *key, unsigned int keylen, u32 *flags)
-{
- u32 n, w;
-
- n = parity[key[0]]; n <<= 4;
- n |= parity[key[1]]; n <<= 4;
- n |= parity[key[2]]; n <<= 4;
- n |= parity[key[3]]; n <<= 4;
- n |= parity[key[4]]; n <<= 4;
- n |= parity[key[5]]; n <<= 4;
- n |= parity[key[6]]; n <<= 4;
- n |= parity[key[7]];
- w = 0x88888888L;
-
- if ((*flags & CRYPTO_TFM_REQ_WEAK_KEY)
- && !((n - (w >> 3)) & w)) { /* 1 in 10^10 keys passes this test */
- if (n < 0x41415151) {
- if (n < 0x31312121) {
- if (n < 0x14141515) {
- /* 01 01 01 01 01 01 01 01 */
- if (n == 0x11111111) goto weak;
- /* 01 1F 01 1F 01 0E 01 0E */
- if (n == 0x13131212) goto weak;
- } else {
- /* 01 E0 01 E0 01 F1 01 F1 */
- if (n == 0x14141515) goto weak;
- /* 01 FE 01 FE 01 FE 01 FE */
- if (n == 0x16161616) goto weak;
- }
- } else {
- if (n < 0x34342525) {
- /* 1F 01 1F 01 0E 01 0E 01 */
- if (n == 0x31312121) goto weak;
- /* 1F 1F 1F 1F 0E 0E 0E 0E (?) */
- if (n == 0x33332222) goto weak;
- } else {
- /* 1F E0 1F E0 0E F1 0E F1 */
- if (n == 0x34342525) goto weak;
- /* 1F FE 1F FE 0E FE 0E FE */
- if (n == 0x36362626) goto weak;
- }
- }
- } else {
- if (n < 0x61616161) {
- if (n < 0x44445555) {
- /* E0 01 E0 01 F1 01 F1 01 */
- if (n == 0x41415151) goto weak;
- /* E0 1F E0 1F F1 0E F1 0E */
- if (n == 0x43435252) goto weak;
- } else {
- /* E0 E0 E0 E0 F1 F1 F1 F1 (?) */
- if (n == 0x44445555) goto weak;
- /* E0 FE E0 FE F1 FE F1 FE */
- if (n == 0x46465656) goto weak;
- }
- } else {
- if (n < 0x64646565) {
- /* FE 01 FE 01 FE 01 FE 01 */
- if (n == 0x61616161) goto weak;
- /* FE 1F FE 1F FE 0E FE 0E */
- if (n == 0x63636262) goto weak;
- } else {
- /* FE E0 FE E0 FE F1 FE F1 */
- if (n == 0x64646565) goto weak;
- /* FE FE FE FE FE FE FE FE */
- if (n == 0x66666666) goto weak;
- }
- }
- }
- }
- return 0;
-weak:
- *flags |= CRYPTO_TFM_RES_WEAK_KEY;
- return -EINVAL;
-}
-
-EXPORT_SYMBOL(crypto_des_check_key);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Key Check function for DES & DES3 Cipher Algorithms");
+++ /dev/null
-/*
- * arch/ubicom32/crypto/des_ubicom32.c
- * Ubicom32 implementation of the DES Cipher Algorithm.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <crypto/algapi.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include "crypto_ubicom32.h"
-extern int crypto_des_check_key(const u8 *key, unsigned int keylen, u32 *flags);
-
-#define DES_BLOCK_SIZE 8
-#define DES_KEY_SIZE 8
-
-#define DES3_192_KEY_SIZE (3 * DES_KEY_SIZE)
-#define DES3_192_BLOCK_SIZE DES_BLOCK_SIZE
-
-#define DES3_SUB_KEY(key, i) (((u8 *)key) + (i * DES_KEY_SIZE))
-
-enum des_ops {
- DES_ENCRYPT,
- DES_DECRYPT,
-
- DES3_EDE_ENCRYPT,
- DES3_EDE_DECRYPT,
-
-#ifdef DES3_EEE
- DES3_EEE_ENCRYPT,
- DES3_EEE_DECRYPT,
-#endif
-};
-
-struct ubicom32_des_ctx {
- u8 key[3 * DES_KEY_SIZE];
- u32 ctrl;
- int key_len;
-};
-
-static inline void des_hw_set_key(const u8 *key, u8 key_len)
-{
- /*
- * HW 3DES is not tested yet, use DES just as ipOS
- */
- DES_SET_KEY(key);
-}
-
-static inline void des_hw_cipher(u8 *out, const u8 *in)
-{
- SEC_SET_INPUT_2W(in);
-
- asm volatile (
- " ; start DES by writing 0x38(SECURITY_BASE) \n\t"
- " move.4 0x38(%0), #0x01 \n\t"
- " pipe_flush 0 \n\t"
- " \n\t"
- " ; wait for the module to calculate the output \n\t"
- " btst 0x04(%0), #0 \n\t"
- " jmpne.f .-4 \n\t"
- :
- : "a" (SEC_BASE)
- : "cc"
- );
-
- SEC_GET_OUTPUT_2W(out);
-}
-
-
-static void inline des3_hw_ede_encrypt(u8 *keys, u8 *out, const u8 *in)
-{
- hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
- des_hw_set_key(DES3_SUB_KEY(keys, 0), DES_KEY_SIZE);
- des_hw_cipher(out, in);
-
- hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
- des_hw_set_key(DES3_SUB_KEY(keys, 1), DES_KEY_SIZE);
- des_hw_cipher(out, out);
-
- hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
- des_hw_set_key(DES3_SUB_KEY(keys, 2), DES_KEY_SIZE);
- des_hw_cipher(out, out);
-}
-
-static void inline des3_hw_ede_decrypt(u8 *keys, u8 *out, const u8 *in)
-{
- hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
- des_hw_set_key(DES3_SUB_KEY(keys, 2), DES_KEY_SIZE);
- des_hw_cipher(out, in);
-
- hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
- des_hw_set_key(DES3_SUB_KEY(keys, 1), DES_KEY_SIZE);
- des_hw_cipher(out, out);
-
- hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
- des_hw_set_key(DES3_SUB_KEY(keys, 0), DES_KEY_SIZE);
- des_hw_cipher(out, out);
-}
-
-#ifdef DES3_EEE
-static void inline des3_hw_eee_encrypt(u8 *keys, u8 *out, const u8 *in)
-{
- hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
- des_hw_set_key(DES3_SUB_KEY(keys, 0), 2);
- des_hw_cipher(out, in);
-
- hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
- des_hw_set_key(DES3_SUB_KEY(keys, 1), 2);
- des_hw_cipher(out, out);
-
- hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
- des_hw_set_key(DES3_SUB_KEY(keys, 2), 2);
- des_hw_cipher(out, out);
-}
-
-static void inline des3_hw_eee_decrypt(u8 *keys, u8 *out, const u8 *in)
-{
- hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
- des_hw_set_key(DES3_SUB_KEY(keys, 2), 2);
- des_hw_cipher(out, in);
-
- hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
- des_hw_set_key(DES3_SUB_KEY(keys, 1), 2);
- des_hw_cipher(out, out);
-
- hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
- des_hw_set_key(DES3_SUB_KEY(keys, 0), 2);
- des_hw_cipher(out, out);
-}
-#endif
-
-static int des_setkey(struct crypto_tfm *tfm, const u8 *key,
- unsigned int keylen)
-{
- struct ubicom32_des_ctx *dctx = crypto_tfm_ctx(tfm);
- u32 *flags = &tfm->crt_flags;
- int ret;
-
- /* test if key is valid (not a weak key) */
- ret = crypto_des_check_key(key, keylen, flags);
- if (ret == 0) {
- memcpy(dctx->key, key, keylen);
- dctx->key_len = keylen;
- //dctx->ctrl = (keylen == DES_KEY_SIZE) ? SEC_ALG_DES : SEC_ALG_3DES
- /* 2DES and 3DES are both implemented with DES hw function */
- dctx->ctrl = SEC_ALG_DES;
- }
- return ret;
-}
-
-static inline void des_cipher_1b(struct crypto_tfm *tfm, u8 *out, const u8 *in, u32 extra_flags)
-{
- const struct ubicom32_des_ctx *uctx = crypto_tfm_ctx(tfm);
-
- hw_crypto_lock();
- hw_crypto_check();
- hw_crypto_set_ctrl(uctx->ctrl | extra_flags);
-
- des_hw_set_key(uctx->key, uctx->key_len);
- des_hw_cipher(out, in);
-
- hw_crypto_unlock();
-}
-
-static void des_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
-{
- des_cipher_1b(tfm, out, in, SEC_DIR_ENCRYPT);
-}
-
-static void des_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
-{
- des_cipher_1b(tfm, out, in, SEC_DIR_DECRYPT);
-}
-
-static struct crypto_alg des_alg = {
- .cra_name = "des",
- .cra_driver_name = "des-ubicom32",
- .cra_priority = CRYPTO_UBICOM32_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
- .cra_blocksize = DES_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
- .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
- .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(des_alg.cra_list),
- .cra_u = {
- .cipher = {
- .cia_min_keysize = DES_KEY_SIZE,
- .cia_max_keysize = DES_KEY_SIZE,
- .cia_setkey = des_setkey,
- .cia_encrypt = des_encrypt,
- .cia_decrypt = des_decrypt,
- }
- }
-};
-
-static void ecb_des_ciper_loop(u8 *out, u8 *in, unsigned int n)
-{
- while (likely(n)) {
- des_hw_cipher(out, in);
- out += DES_BLOCK_SIZE;
- in += DES_BLOCK_SIZE;
- n -= DES_BLOCK_SIZE;
- }
-}
-
-static void ecb_des3_ede_encrypt_loop(u8 *keys, u8 *out, u8 *in, unsigned int n)
-{
- while (likely(n)) {
- des3_hw_ede_encrypt(keys, out, in);
-
- out += DES_BLOCK_SIZE;
- in += DES_BLOCK_SIZE;
- n -= DES_BLOCK_SIZE;
- }
-}
-
-static void ecb_des3_ede_decrypt_loop(u8 *keys, u8 *out, u8 *in, unsigned int n)
-{
- while (likely(n)) {
- des3_hw_ede_decrypt(keys, out, in);
-
- out += DES_BLOCK_SIZE;
- in += DES_BLOCK_SIZE;
- n -= DES_BLOCK_SIZE;
- }
-}
-
-#ifdef DES3_EEE
-static void ecb_des3_eee_encrypt_loop(u8 *keys, u8 *out, u8 *in, unsigned int n)
-{
- while (likely(n)) {
- des3_hw_eee_encrypt(keys, out, in);
-
- out += DES_BLOCK_SIZE;
- in += DES_BLOCK_SIZE;
- n -= DES_BLOCK_SIZE;
- }
-}
-
-static void ecb_des3_eee_decrypt_loop(u8 *keys, u8 *out, u8 *in, unsigned int n)
-{
- while (likely(n)) {
- des3_hw_eee_decrypt(keys, out, in);
-
- out += DES_BLOCK_SIZE;
- in += DES_BLOCK_SIZE;
- n -= DES_BLOCK_SIZE;
- }
-}
-#endif
-
-static inline void ecb_des_cipher_n(struct ubicom32_des_ctx *uctx, enum des_ops op, u8 *out, u8 *in, unsigned int n)
-{
- switch (op) {
- case DES_ENCRYPT:
- case DES_DECRYPT:
- /* set the right algo, direction and key once */
- hw_crypto_set_ctrl(SEC_ALG_DES | (op == DES_ENCRYPT ? SEC_DIR_ENCRYPT : 0));
- des_hw_set_key(uctx->key, uctx->key_len);
- ecb_des_ciper_loop(out, in, n);
- break;
-
- case DES3_EDE_ENCRYPT:
- ecb_des3_ede_encrypt_loop(uctx->key, out, in, n);
- break;
-
- case DES3_EDE_DECRYPT:
- ecb_des3_ede_decrypt_loop(uctx->key, out, in, n);
- break;
-
-#ifdef DES3_EEE
- case DES3_EEE_ENCRYPT:
- ecb_des3_eee_encrypt_loop(uctx->key, out, in, n);
- break;
-
- case DES3_EEE_DECRYPT:
- ecb_des3_eee_decrypt_loop(uctx->key, out, in, n);
- break;
-#endif
- }
-}
-
-static inline void des_xor_2w(u32 *data, u32 *iv)
-{
- data[0] ^= iv[0];
- data[1] ^= iv[1];
-}
-
-static void cbc_des_encrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n)
-{
- while (likely(n)) {
- des_xor_2w((u32 *)in, (u32 *)iv);
- des_hw_cipher(out, in);
- SEC_COPY_2W(iv, out);
- out += DES_BLOCK_SIZE;
- in += DES_BLOCK_SIZE;
- n -= DES_BLOCK_SIZE;
- }
-}
-
-static void cbc_des_decrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n)
-{
- u8 next_iv[DES_BLOCK_SIZE];
- while (likely(n)) {
- SEC_COPY_2W(next_iv, in);
- des_hw_cipher(out, in);
- des_xor_2w((u32 *)out, (u32 *)iv);
- SEC_COPY_2W(iv, next_iv);
-
- out += DES_BLOCK_SIZE;
- in += DES_BLOCK_SIZE;
- n -= DES_BLOCK_SIZE;
- }
-}
-
-static void cbc_des3_ede_encrypt_loop(u8 *keys, u8 *out, u8 *in, u8 *iv, unsigned int n)
-{
- while (likely(n)) {
- des_xor_2w((u32 *)in, (u32 *)iv);
- des3_hw_ede_encrypt(keys, out, in);
- SEC_COPY_2W(iv, out);
-
- out += DES_BLOCK_SIZE;
- in += DES_BLOCK_SIZE;
- n -= DES_BLOCK_SIZE;
- }
-}
-
-static void cbc_des3_ede_decrypt_loop(u8 *keys, u8 *out, u8 *in, u8 *iv, unsigned int n)
-{
- u8 next_iv[DES_BLOCK_SIZE];
- while (likely(n)) {
- SEC_COPY_2W(next_iv, in);
- des3_hw_ede_decrypt(keys, out, in);
- des_xor_2w((u32 *)out, (u32 *)iv);
- SEC_COPY_2W(iv, next_iv);
-
- out += DES_BLOCK_SIZE;
- in += DES_BLOCK_SIZE;
- n -= DES_BLOCK_SIZE;
- }
-}
-
-#ifdef DES3_EEE
-static void cbc_des3_eee_encrypt_loop(u8 *keys, u8 *out, u8 *in, u8 *iv, unsigned int n)
-{
- while (likely(n)) {
- des_xor_2w((u32 *)in, (u32 *)iv);
- des3_hw_eee_encrypt(keys, out, in);
- SEC_COPY_2W(iv, out);
-
- out += DES_BLOCK_SIZE;
- in += DES_BLOCK_SIZE;
- n -= DES_BLOCK_SIZE;
- }
-}
-
-static void cbc_des3_eee_decrypt_loop(u8 *keys, u8 *out, u8 *in, u8 *iv, unsigned int n)
-{
- u8 next_iv[DES_BLOCK_SIZE];
- while (likely(n)) {
- SEC_COPY_2W(next_iv, in);
- des3_hw_eee_decrypt(keys, out, in);
- des_xor_2w((u32 *)out, (u32 *)iv);
- SEC_COPY_2W(iv, next_iv);
-
- out += DES_BLOCK_SIZE;
- in += DES_BLOCK_SIZE;
- n -= DES_BLOCK_SIZE;
- }
-}
-#endif
-
-static inline void cbc_des_cipher_n(struct ubicom32_des_ctx *uctx, enum des_ops op, u8 *out, u8 *in, u8 *iv, unsigned int n)
-{
- switch (op) {
- case DES_ENCRYPT:
- hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
- des_hw_set_key(uctx->key, uctx->key_len);
- cbc_des_encrypt_loop(out, in, iv, n);
- break;
-
- case DES_DECRYPT:
- /* set the right algo, direction and key once */
- hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
- des_hw_set_key(uctx->key, uctx->key_len);
- cbc_des_decrypt_loop(out, in, iv, n);
- break;
-
- case DES3_EDE_ENCRYPT:
- cbc_des3_ede_encrypt_loop(uctx->key, out, in, iv, n);
- break;
-
- case DES3_EDE_DECRYPT:
- cbc_des3_ede_decrypt_loop(uctx->key, out, in, iv, n);
- break;
-
-#ifdef DES3_EEE
- case DES3_EEE_ENCRYPT:
- cbc_des3_eee_encrypt_loop(uctx->key, out, in, iv, n);
- break;
-
- case DES3_EEE_DECRYPT:
- cbc_des3_eee_decrypt_loop(uctx->key, out, in, iv, n);
- break;
-#endif
- }
-}
-
-static int des_cipher(struct blkcipher_desc *desc, struct scatterlist *dst,
- struct scatterlist *src, unsigned int nbytes, u32 extra_flags, enum des_ops op)
-{
- struct ubicom32_des_ctx *uctx = crypto_blkcipher_ctx(desc->tfm);
- int ret;
-
- struct blkcipher_walk walk;
- blkcipher_walk_init(&walk, dst, src, nbytes);
- ret = blkcipher_walk_virt(desc, &walk);
- if (ret) {
- return ret;
- }
-
- hw_crypto_lock();
- hw_crypto_check();
-
- while ((nbytes = walk.nbytes)) {
- /* only use complete blocks */
- unsigned int n = nbytes & ~(DES_BLOCK_SIZE - 1);
- u8 *out = walk.dst.virt.addr;
- u8 *in = walk.src.virt.addr;
-
- /* finish n/16 blocks */
- if (extra_flags & SEC_CBC_SET) {
- cbc_des_cipher_n(uctx, op, out, in, walk.iv, n);
- } else {
- ecb_des_cipher_n(uctx, op, out, in, n);
- }
-
- nbytes &= DES_BLOCK_SIZE - 1;
- ret = blkcipher_walk_done(desc, &walk, nbytes);
- }
-
- hw_crypto_unlock();
- return ret;
-}
-
-static int ecb_des_encrypt(struct blkcipher_desc *desc,
- struct scatterlist *dst, struct scatterlist *src,
- unsigned int nbytes)
-{
- return des_cipher(desc, dst, src, nbytes, SEC_CBC_NONE, DES_ENCRYPT);
-}
-
-static int ecb_des_decrypt(struct blkcipher_desc *desc,
- struct scatterlist *dst, struct scatterlist *src,
- unsigned int nbytes)
-{
- return des_cipher(desc, dst, src, nbytes, SEC_CBC_NONE, DES_DECRYPT);
-}
-
-static struct crypto_alg ecb_des_alg = {
- .cra_name = "ecb(des)",
- .cra_driver_name = "ecb-des-ubicom32",
- .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
- .cra_blocksize = DES_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
- .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
- .cra_type = &crypto_blkcipher_type,
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(ecb_des_alg.cra_list),
- .cra_u = {
- .blkcipher = {
- .min_keysize = DES_KEY_SIZE,
- .max_keysize = DES_KEY_SIZE,
- .setkey = des_setkey,
- .encrypt = ecb_des_encrypt,
- .decrypt = ecb_des_decrypt,
- }
- }
-};
-
-static int cbc_des_encrypt(struct blkcipher_desc *desc,
- struct scatterlist *dst, struct scatterlist *src,
- unsigned int nbytes)
-{
- return des_cipher(desc, dst, src, nbytes, SEC_CBC_SET, DES_ENCRYPT);
-}
-
-static int cbc_des_decrypt(struct blkcipher_desc *desc,
- struct scatterlist *dst, struct scatterlist *src,
- unsigned int nbytes)
-{
- return des_cipher(desc, dst, src, nbytes, SEC_CBC_SET, DES_DECRYPT);
-}
-
-static struct crypto_alg cbc_des_alg = {
- .cra_name = "cbc(des)",
- .cra_driver_name = "cbc-des-ubicom32",
- .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
- .cra_blocksize = DES_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
- .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
- .cra_type = &crypto_blkcipher_type,
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(cbc_des_alg.cra_list),
- .cra_u = {
- .blkcipher = {
- .min_keysize = DES_KEY_SIZE,
- .max_keysize = DES_KEY_SIZE,
- .ivsize = DES_BLOCK_SIZE,
- .setkey = des_setkey,
- .encrypt = cbc_des_encrypt,
- .decrypt = cbc_des_decrypt,
- }
- }
-};
-
-/*
- * RFC2451:
- *
- * For DES-EDE3, there is no known need to reject weak or
- * complementation keys. Any weakness is obviated by the use of
- * multiple keys.
- *
- * However, if the first two or last two independent 64-bit keys are
- * equal (k1 == k2 or k2 == k3), then the DES3 operation is simply the
- * same as DES. Implementers MUST reject keys that exhibit this
- * property.
- *
- */
-static int des3_192_setkey(struct crypto_tfm *tfm, const u8 *key,
- unsigned int keylen)
-{
- int i, ret;
- struct ubicom32_des_ctx *dctx = crypto_tfm_ctx(tfm);
- const u8 *temp_key = key;
- u32 *flags = &tfm->crt_flags;
-
- if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE) &&
- memcmp(&key[DES_KEY_SIZE], &key[DES_KEY_SIZE * 2],
- DES_KEY_SIZE))) {
-
- *flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED;
- return -EINVAL;
- }
- for (i = 0; i < 3; i++, temp_key += DES_KEY_SIZE) {
- ret = crypto_des_check_key(temp_key, DES_KEY_SIZE, flags);
- if (ret < 0)
- return ret;
- }
- memcpy(dctx->key, key, keylen);
- dctx->ctrl = SEC_ALG_DES; //hw 3DES not working yet
- dctx->key_len = keylen;
- return 0;
-}
-
-static void des3_192_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
-{
- struct ubicom32_des_ctx *uctx = crypto_tfm_ctx(tfm);
-
- hw_crypto_lock();
- hw_crypto_check();
-
- des3_hw_ede_encrypt(uctx->key, dst, src);
-
- hw_crypto_unlock();
-}
-
-static void des3_192_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
-{
- struct ubicom32_des_ctx *uctx = crypto_tfm_ctx(tfm);
-
- hw_crypto_lock();
- hw_crypto_check();
-
- des3_hw_ede_decrypt(uctx->key, dst, src);
-
- hw_crypto_unlock();
-}
-
-static struct crypto_alg des3_192_alg = {
- .cra_name = "des3_ede",
- .cra_driver_name = "des3_ede-ubicom32",
- .cra_priority = CRYPTO_UBICOM32_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
- .cra_blocksize = DES3_192_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
- .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(des3_192_alg.cra_list),
- .cra_u = {
- .cipher = {
- .cia_min_keysize = DES3_192_KEY_SIZE,
- .cia_max_keysize = DES3_192_KEY_SIZE,
- .cia_setkey = des3_192_setkey,
- .cia_encrypt = des3_192_encrypt,
- .cia_decrypt = des3_192_decrypt,
- }
- }
-};
-
-static int ecb_des3_192_encrypt(struct blkcipher_desc *desc,
- struct scatterlist *dst,
- struct scatterlist *src, unsigned int nbytes)
-{
- return des_cipher(desc, dst, src, nbytes, SEC_CBC_NONE, DES3_EDE_ENCRYPT);
-}
-
-static int ecb_des3_192_decrypt(struct blkcipher_desc *desc,
- struct scatterlist *dst,
- struct scatterlist *src, unsigned int nbytes)
-{
- return des_cipher(desc, dst, src, nbytes, SEC_CBC_NONE, DES3_EDE_DECRYPT);
-}
-
-static struct crypto_alg ecb_des3_192_alg = {
- .cra_name = "ecb(des3_ede)",
- .cra_driver_name = "ecb-des3_ede-ubicom32",
- .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
- .cra_blocksize = DES3_192_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
- .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
- .cra_type = &crypto_blkcipher_type,
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(
- ecb_des3_192_alg.cra_list),
- .cra_u = {
- .blkcipher = {
- .min_keysize = DES3_192_KEY_SIZE,
- .max_keysize = DES3_192_KEY_SIZE,
- .setkey = des3_192_setkey,
- .encrypt = ecb_des3_192_encrypt,
- .decrypt = ecb_des3_192_decrypt,
- }
- }
-};
-
-static int cbc_des3_192_encrypt(struct blkcipher_desc *desc,
- struct scatterlist *dst,
- struct scatterlist *src, unsigned int nbytes)
-{
- return des_cipher(desc, dst, src, nbytes, SEC_CBC_SET, DES3_EDE_ENCRYPT);
-}
-
-static int cbc_des3_192_decrypt(struct blkcipher_desc *desc,
- struct scatterlist *dst,
- struct scatterlist *src, unsigned int nbytes)
-{
- return des_cipher(desc, dst, src, nbytes, SEC_CBC_SET, DES3_EDE_DECRYPT);
-}
-
-static struct crypto_alg cbc_des3_192_alg = {
- .cra_name = "cbc(des3_ede)",
- .cra_driver_name = "cbc-des3_ede-ubicom32",
- .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
- .cra_blocksize = DES3_192_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
- .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
- .cra_type = &crypto_blkcipher_type,
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(
- cbc_des3_192_alg.cra_list),
- .cra_u = {
- .blkcipher = {
- .min_keysize = DES3_192_KEY_SIZE,
- .max_keysize = DES3_192_KEY_SIZE,
- .ivsize = DES3_192_BLOCK_SIZE,
- .setkey = des3_192_setkey,
- .encrypt = cbc_des3_192_encrypt,
- .decrypt = cbc_des3_192_decrypt,
- }
- }
-};
-
-static int init(void)
-{
- int ret = 0;
-
- hw_crypto_init();
-
- ret = crypto_register_alg(&des_alg);
- if (ret)
- goto des_err;
- ret = crypto_register_alg(&ecb_des_alg);
- if (ret)
- goto ecb_des_err;
- ret = crypto_register_alg(&cbc_des_alg);
- if (ret)
- goto cbc_des_err;
-
- ret = crypto_register_alg(&des3_192_alg);
- if (ret)
- goto des3_192_err;
- ret = crypto_register_alg(&ecb_des3_192_alg);
- if (ret)
- goto ecb_des3_192_err;
- ret = crypto_register_alg(&cbc_des3_192_alg);
- if (ret)
- goto cbc_des3_192_err;
-
-out:
- return ret;
-
-cbc_des3_192_err:
- crypto_unregister_alg(&ecb_des3_192_alg);
-ecb_des3_192_err:
- crypto_unregister_alg(&des3_192_alg);
-des3_192_err:
- crypto_unregister_alg(&cbc_des_alg);
-cbc_des_err:
- crypto_unregister_alg(&ecb_des_alg);
-ecb_des_err:
- crypto_unregister_alg(&des_alg);
-des_err:
- goto out;
-}
-
-static void __exit fini(void)
-{
- crypto_unregister_alg(&cbc_des3_192_alg);
- crypto_unregister_alg(&ecb_des3_192_alg);
- crypto_unregister_alg(&des3_192_alg);
- crypto_unregister_alg(&cbc_des_alg);
- crypto_unregister_alg(&ecb_des_alg);
- crypto_unregister_alg(&des_alg);
-}
-
-module_init(init);
-module_exit(fini);
-
-MODULE_ALIAS("des");
-MODULE_ALIAS("des3_ede");
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms");
+++ /dev/null
-/*
- * arch/ubicom32/crypto/md5_ubicom32.c
- * Ubicom32 implementation of the MD5 Secure Hash Algorithm
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/crypto.h>
-
-#include "crypto_ubicom32.h"
-
-#define MD5_DIGEST_SIZE 16
-#define MD5_BLOCK_SIZE 64
-#define MD5_HASH_WORDS 4
-
-extern void _md5_ip5k_init_digest(u32_t *digest);
-extern void _md5_ip5k_transform(u32_t *data_input);
-extern void _md5_ip5k_get_digest(u32_t *digest);
-
-struct ubicom32_md5_ctx {
- u64 count; /* message length */
- u32 state[MD5_HASH_WORDS];
- u8 buf[2 * MD5_BLOCK_SIZE];
-};
-
-static void md5_init(struct crypto_tfm *tfm)
-{
- struct ubicom32_md5_ctx *mctx = crypto_tfm_ctx(tfm);
- mctx->state[0] = 0x01234567;
- mctx->state[1] = 0x89abcdef;
- mctx->state[2] = 0xfedcba98;
- mctx->state[3] = 0x76543210;
-
- mctx->count = 0;
-}
-
-static inline void _md5_process(u32 *digest, const u8 *data)
-{
- _md5_ip5k_transform((u32 *)data);
-}
-
-static void md5_update(struct crypto_tfm *tfm, const u8 *data,
- unsigned int len)
-{
- struct ubicom32_md5_ctx *mctx = crypto_tfm_ctx(tfm);
- int index, clen;
-
- /* how much is already in the buffer? */
- index = mctx->count & 0x3f;
-
- mctx->count += len;
-
- if (index + len < MD5_BLOCK_SIZE) {
- goto store_only;
- }
-
- hw_crypto_lock();
- hw_crypto_check();
-
- /* init digest set ctrl register too */
- _md5_ip5k_init_digest(mctx->state);
-
- if (unlikely(index == 0 && SEC_ALIGNED(data))) {
-fast_process:
- while (len >= MD5_BLOCK_SIZE) {
- _md5_process(mctx->state, data);
- data += MD5_BLOCK_SIZE;
- len -= MD5_BLOCK_SIZE;
- }
- goto store;
- }
-
- /* process one stored block */
- if (index) {
- clen = MD5_BLOCK_SIZE - index;
- memcpy(mctx->buf + index, data, clen);
- _md5_process(mctx->state, mctx->buf);
- data += clen;
- len -= clen;
- index = 0;
- }
-
- if (likely(SEC_ALIGNED(data))) {
- goto fast_process;
- }
-
- /* process as many blocks as possible */
- while (len >= MD5_BLOCK_SIZE) {
- memcpy(mctx->buf, data, MD5_BLOCK_SIZE);
- _md5_process(mctx->state, mctx->buf);
- data += MD5_BLOCK_SIZE;
- len -= MD5_BLOCK_SIZE;
- }
-
-store:
- _md5_ip5k_get_digest(mctx->state);
- hw_crypto_unlock();
-
-store_only:
- /* anything left? */
- if (len)
- memcpy(mctx->buf + index , data, len);
-}
-
-/* Add padding and return the message digest. */
-static void md5_final(struct crypto_tfm *tfm, u8 *out)
-{
- struct ubicom32_md5_ctx *mctx = crypto_tfm_ctx(tfm);
- u32 bits[2];
- unsigned int index, end;
-
- /* must perform manual padding */
- index = mctx->count & 0x3f;
- end = (index < 56) ? MD5_BLOCK_SIZE : (2 * MD5_BLOCK_SIZE);
-
- /* start pad with 1 */
- mctx->buf[index] = 0x80;
-
- /* pad with zeros */
- index++;
- memset(mctx->buf + index, 0x00, end - index - 8);
-
- /* append message length */
- bits[0] = mctx->count << 3;
- bits[1] = mctx->count >> 29;
- __cpu_to_le32s(bits);
- __cpu_to_le32s(bits + 1);
-
- memcpy(mctx->buf + end - 8, &bits, sizeof(bits));
-
- /* force to use the mctx->buf and ignore the partial buf */
- mctx->count = mctx->count & ~0x3f;
- md5_update(tfm, mctx->buf, end);
-
- /* copy digest to out */
- memcpy(out, mctx->state, MD5_DIGEST_SIZE);
-
- /* wipe context */
- memset(mctx, 0, sizeof *mctx);
-}
-
-static struct crypto_alg alg = {
- .cra_name = "md5",
- .cra_driver_name= "md5-ubicom32",
- .cra_priority = CRYPTO_UBICOM32_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_DIGEST,
- .cra_blocksize = MD5_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct ubicom32_md5_ctx),
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(alg.cra_list),
- .cra_u = {
- .digest = {
- .dia_digestsize = MD5_DIGEST_SIZE,
- .dia_init = md5_init,
- .dia_update = md5_update,
- .dia_final = md5_final,
- }
- }
-};
-
-static int __init init(void)
-{
- hw_crypto_init();
- return crypto_register_alg(&alg);
-}
-
-static void __exit fini(void)
-{
- crypto_unregister_alg(&alg);
-}
-
-module_init(init);
-module_exit(fini);
-
-MODULE_ALIAS("md5");
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("MD5 Secure Hash Algorithm");
+++ /dev/null
-/*
- * arch/ubicom32/crypto/md5_ubicom32_asm.S
- * MD5 (Message Digest 5) support for Ubicom32 v3 architecture
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#define __ASM__
-#include <asm/ip5000.h>
-
-#ifndef RP
-#define RP A5
-#endif
-
-;*****************************************************************************************
-; The function prototypes
-;*****************************************************************************************
-; void md5_ip5k_init(void)
-; void md5_ip5k_transform(u32_t *data_input)
-; void md5_get_digest(u32_t *digest)
-
-;*****************************************************************************************
-; Inputs
-;*****************************************************************************************;
-; data_input is the pointer to the block of data over which the digest will be calculated.
-; It should be word aligned.
-;
-; digest is the pointer to the block of data into which the digest (the output) will be written.
-; It should be word aligned.
-;
-
-;*****************************************************************************************
-; Outputs
-;*****************************************************************************************
-; None
-
-;*****************************************************************************************
-; An: Address Registers
-;*****************************************************************************************
-#define an_digest A3
-#define an_data_input A3
-#define an_security_block A4
-
-;*****************************************************************************************
-; Hash Constants
-;*****************************************************************************************
-#define HASH_MD5_IN0 0x01234567
-#define HASH_MD5_IN1 0x89abcdef
-#define HASH_MD5_IN2 0xfedcba98
-#define HASH_MD5_IN3 0x76543210
-
-#define HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION 2
-#define HASH_SECURITY_BLOCK_CONTROL_INIT_MD5 ((1 << 4) | HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION)
-
-;*****************************************************************************************
-; Hash related defines
-;*****************************************************************************************
-#define hash_control 0x00(an_security_block)
-#define hash_control_low 0x02(an_security_block)
-#define hash_status 0x04(an_security_block)
-
-#define hash_input_0 0x30(an_security_block)
-#define hash_input_1 0x34(an_security_block)
-#define hash_input_2 0x38(an_security_block)
-#define hash_input_3 0x3c(an_security_block)
-#define hash_input_4 0x40(an_security_block)
-
-#define hash_output_0 0x70(an_security_block)
-#define hash_output_0_low 0x72(an_security_block)
-#define hash_output_1 0x74(an_security_block)
-#define hash_output_1_low 0x76(an_security_block)
-#define hash_output_2 0x78(an_security_block)
-#define hash_output_2_low 0x7a(an_security_block)
-#define hash_output_3 0x7c(an_security_block)
-#define hash_output_3_low 0x7e(an_security_block)
-
-;*****************************************************************************************
-; Assembly macros
-;*****************************************************************************************
- ; C compiler reserves RP (A5) for return address during subroutine call.
- ; Use RP to return to caller
-.macro call_return_macro
- calli RP, 0(RP)
-.endm
-
-#if 0
-;*****************************************************************************************
-; void md5_ip5k_init(void)
-; initialize the output registers of the hash module
-;
- ;.section .text.md5_ip5k_init,"ax",@progbits
- .section .text
- .global _md5_ip5k_init
- .func md5_ip5k_init, _md5_ip5k_init
-
-_md5_ip5k_init:
- moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
-
- movei hash_control, #%hi(HASH_SECURITY_BLOCK_CONTROL_INIT_MD5)
- movei hash_control_low, #%lo(HASH_SECURITY_BLOCK_CONTROL_INIT_MD5)
-
- movei hash_output_0, #%hi(HASH_MD5_IN0)
- movei hash_output_0_low, #%lo(HASH_MD5_IN0)
-
- movei hash_output_1, #%hi(HASH_MD5_IN1)
- movei hash_output_1_low, #%lo(HASH_MD5_IN1)
-
- movei hash_output_2, #%hi(HASH_MD5_IN2)
- movei hash_output_2_low, #%lo(HASH_MD5_IN2)
-
- movei hash_output_3, #%hi(HASH_MD5_IN3)
- movei hash_output_3_low, #%lo(HASH_MD5_IN3)
-
- call_return_macro
- .endfunc
-#endif
-
-;*****************************************************************************************
-; void md5_ip5k_init_digest(u32_t *hash_input)
-; initialize the output registers of the hash module
-
- ;.section .text.md5_ip5k_init_digest,"ax",@progbits
- .section .text
- .global _md5_ip5k_init_digest
- .func md5_ip5k_init_digest, _md5_ip5k_init_digest
-
-_md5_ip5k_init_digest:
- movea an_data_input, D0
-
- moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
-
- movei hash_control, #%hi(HASH_SECURITY_BLOCK_CONTROL_INIT_MD5)
- movei hash_control_low, #%lo(HASH_SECURITY_BLOCK_CONTROL_INIT_MD5)
-
- move.4 hash_output_0, (an_data_input)4++
- move.4 hash_output_1, (an_data_input)4++
- move.4 hash_output_2, (an_data_input)4++
- move.4 hash_output_3, (an_data_input)4++
-
- call_return_macro
- .endfunc
-
-;*****************************************************************************************
-; void md5_ip5k_transform(u32_t *data_input)
-; performs intermediate transformation step for the hash calculation
-;
- ;.sect .text.md5_ip5k_transform,"ax",@progbits
- .section .text
- .global _md5_ip5k_transform
- .func md5_ip5k_transform, _md5_ip5k_transform
-
-_md5_ip5k_transform:
- movea an_data_input, D0
-
- moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
-
- ; Write the first 128bits (16 bytes)
- move.4 hash_input_0, (an_data_input)4++
- move.4 hash_input_1, (an_data_input)4++
- move.4 hash_input_2, (an_data_input)4++
- move.4 hash_input_3, (an_data_input)4++
- move.4 hash_input_4, D0
-
- move.4 hash_input_0, (an_data_input)4++
- move.4 hash_input_1, (an_data_input)4++
- move.4 hash_input_2, (an_data_input)4++
- move.4 hash_input_3, (an_data_input)4++
- move.4 hash_input_4, D0
-
- move.4 hash_input_0, (an_data_input)4++
- move.4 hash_input_1, (an_data_input)4++
- move.4 hash_input_2, (an_data_input)4++
- move.4 hash_input_3, (an_data_input)4++
- move.4 hash_input_4, D0
-
- move.4 hash_input_0, (an_data_input)4++
- move.4 hash_input_1, (an_data_input)4++
- move.4 hash_input_2, (an_data_input)4++
- move.4 hash_input_3, (an_data_input)4++
- move.4 hash_input_4, D0
-
- pipe_flush 0
-
-md5_ip5k_transform_wait:
- ; wait for the module to calculate the output hash
- btst hash_status, #0
- jmpne.f md5_ip5k_transform_wait
-
- call_return_macro
- .endfunc
-
-;*****************************************************************************************
-; void md5_ip5k_get_digest(u32_t *digest)
-; Return the hash of the input data
-;
- ;.sect .text.md5_get_digest,"ax",@progbits
- .section .text
- .global _md5_ip5k_get_digest
- .func md5_ip5k_get_digest, _md5_ip5k_get_digest
-
-_md5_ip5k_get_digest:
- movea an_digest, D0
-
- moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
-
- ; we have finished
- move.4 0(an_digest), hash_output_0
- move.4 4(an_digest), hash_output_1
- move.4 8(an_digest), hash_output_2
- move.4 12(an_digest), hash_output_3
-
- call_return_macro
- .endfunc
+++ /dev/null
-/*
- * arch/ubicom32/crypto/sha1_ubicom32.c
- * Ubicom32 implementation of the SHA1 Secure Hash Algorithm.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/crypto.h>
-#include <crypto/sha.h>
-#include <asm/linkage.h>
-
-#include "crypto_ubicom32.h"
-#define HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION 2
-#define HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1 ((1 << 5) | HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION)
-
-struct ubicom32_sha1_ctx {
- u64 count; /* message length */
- u32 state[5];
- u8 buf[2 * SHA1_BLOCK_SIZE];
-};
-
-static inline void sha1_clear_2ws(u8 *buf, int wc)
-{
- asm volatile (
- "1: move.4 (%0)4++, #0 \n\t"
- " move.4 (%0)4++, #0 \n\t"
- " sub.4 %1, #2, %1 \n\t"
- " jmple.f 1b \n\t"
- :
- : "a" (buf), "d" (wc)
- : "cc"
- );
-}
-
-/* only wipe out count, state, and 1st half of buf - 9 bytes at most */
-#define sha1_wipe_out(sctx) sha1_clear_2ws((u8 *)sctx, 2 + 5 + 16 - 2)
-
-static inline void sha1_init_digest(u32 *digest)
-{
- hw_crypto_set_ctrl(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1);
- asm volatile (
- " ; move digests to hash_output regs \n\t"
- " move.4 0x70(%0), 0x0(%1) \n\t"
- " move.4 0x74(%0), 0x4(%1) \n\t"
- " move.4 0x78(%0), 0x8(%1) \n\t"
- " move.4 0x7c(%0), 0xc(%1) \n\t"
- " move.4 0x80(%0), 0x10(%1) \n\t"
- :
- : "a" (SEC_BASE), "a" (digest)
- );
-}
-
-static inline void sha1_transform_feed(const u8 *in)
-{
- asm volatile (
- " ; write the 1st 16 bytes \n\t"
- " move.4 0x30(%0), 0x0(%1) \n\t"
- " move.4 0x34(%0), 0x4(%1) \n\t"
- " move.4 0x38(%0), 0x8(%1) \n\t"
- " move.4 0x3c(%0), 0xc(%1) \n\t"
- " move.4 0x40(%0), %1 \n\t"
- " ; write the 2nd 16 bytes \n\t"
- " move.4 0x30(%0), 0x10(%1) \n\t"
- " move.4 0x34(%0), 0x14(%1) \n\t"
- " move.4 0x38(%0), 0x18(%1) \n\t"
- " move.4 0x3c(%0), 0x1c(%1) \n\t"
- " move.4 0x40(%0), %1 \n\t"
- " ; write the 3rd 16 bytes \n\t"
- " move.4 0x30(%0), 0x20(%1) \n\t"
- " move.4 0x34(%0), 0x24(%1) \n\t"
- " move.4 0x38(%0), 0x28(%1) \n\t"
- " move.4 0x3c(%0), 0x2c(%1) \n\t"
- " move.4 0x40(%0), %1 \n\t"
- " ; write the 4th 16 bytes \n\t"
- " move.4 0x30(%0), 0x30(%1) \n\t"
- " move.4 0x34(%0), 0x34(%1) \n\t"
- " move.4 0x38(%0), 0x38(%1) \n\t"
- " move.4 0x3c(%0), 0x3c(%1) \n\t"
- " move.4 0x40(%0), %1 \n\t"
- " pipe_flush 0 \n\t"
- :
- : "a"(SEC_BASE), "a"(in)
- );
-}
-
-static inline void sha1_transform_wait(void)
-{
- asm volatile (
- " btst 0x04(%0), #0 \n\t"
- " jmpne.f -4 \n\t"
- :
- : "a"(SEC_BASE)
- : "cc"
- );
-}
-
-static inline void sha1_output_digest(u32 *digest)
-{
- asm volatile (
- " move.4 0x0(%1), 0x70(%0) \n\t"
- " move.4 0x4(%1), 0x74(%0) \n\t"
- " move.4 0x8(%1), 0x78(%0) \n\t"
- " move.4 0xc(%1), 0x7c(%0) \n\t"
- " move.4 0x10(%1), 0x80(%0) \n\t"
- :
- : "a" (SEC_BASE), "a" (digest)
- );
-}
-
-static __ocm_text void sha1_init(struct crypto_tfm *tfm)
-{
- struct ubicom32_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
-
- sctx->state[0] = SHA1_H0;
- sctx->state[1] = SHA1_H1;
- sctx->state[2] = SHA1_H2;
- sctx->state[3] = SHA1_H3;
- sctx->state[4] = SHA1_H4;
- sctx->count = 0;
-}
-
-static void __ocm_text sha1_update(struct crypto_tfm *tfm, const u8 *data,
- unsigned int len)
-{
- struct ubicom32_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
- int index, clen;
-
- /* how much is already in the buffer? */
- index = sctx->count & 0x3f;
-
- sctx->count += len;
-
- if (index + len < SHA1_BLOCK_SIZE) {
- goto store_only;
- }
-
- hw_crypto_lock();
- hw_crypto_check();
-
- /* init digest set ctrl register too */
- sha1_init_digest(sctx->state);
-
- if (unlikely(index == 0 && SEC_ALIGNED(data))) {
-fast_process:
-#if CRYPTO_UBICOM32_LOOP_ASM
- if (likely(len >= SHA1_BLOCK_SIZE)) {
- register unsigned int cnt = len >> 6; // loop = len / 64;
- sha1_transform_feed(data);
- data += SHA1_BLOCK_SIZE;
-
- /* cnt is pre-decremented in the loop */
- asm volatile (
- "; while (--loop): work on 2nd block \n\t"
- "1: add.4 %2, #-1, %2 \n\t"
- " jmpeq.f 5f \n\t"
- " \n\t"
- " ; write the 1st 16 bytes \n\t"
- " move.4 0x30(%1), (%0)4++ \n\t"
- " move.4 0x34(%1), (%0)4++ \n\t"
- " move.4 0x38(%1), (%0)4++ \n\t"
- " move.4 0x3c(%1), (%0)4++ \n\t"
- " ; can not kick off hw before it \n\t"
- " ; is done with the prev block \n\t"
- " \n\t"
- " btst 0x04(%1), #0 \n\t"
- " jmpne.f -4 \n\t"
- " \n\t"
- " ; tell hw to load 1st 16 bytes \n\t"
- " move.4 0x40(%1), %2 \n\t"
- " \n\t"
- " ; write the 2nd 16 bytes \n\t"
- " move.4 0x30(%1), (%0)4++ \n\t"
- " move.4 0x34(%1), (%0)4++ \n\t"
- " move.4 0x38(%1), (%0)4++ \n\t"
- " move.4 0x3c(%1), (%0)4++ \n\t"
- " move.4 0x40(%1), %2 \n\t"
- " \n\t"
- " ; write the 3rd 16 bytes \n\t"
- " move.4 0x30(%1), (%0)4++ \n\t"
- " move.4 0x34(%1), (%0)4++ \n\t"
- " move.4 0x38(%1), (%0)4++ \n\t"
- " move.4 0x3c(%1), (%0)4++ \n\t"
- " move.4 0x40(%1), %2 \n\t"
- " \n\t"
- " ; write the 4th 16 bytes \n\t"
- " move.4 0x30(%1), (%0)4++ \n\t"
- " move.4 0x34(%1), (%0)4++ \n\t"
- " move.4 0x38(%1), (%0)4++ \n\t"
- " move.4 0x3c(%1), (%0)4++ \n\t"
- " move.4 0x40(%1), %2 \n\t"
- " \n\t"
- "; no need flush, enough insts \n\t"
- "; before next hw wait \n\t"
- " \n\t"
- "; go back to loop \n\t"
- " jmpt 1b \n\t"
- " \n\t"
- "; wait hw for last block \n\t"
- "5: btst 0x04(%1), #0 \n\t"
- " jmpne.f -4 \n\t"
- " \n\t"
- : "+a" (data)
- : "a"( SEC_BASE), "d" (cnt)
- : "cc"
- );
-
- len = len & (64 - 1);
- }
-#else
- while (likely(len >= SHA1_BLOCK_SIZE)) {
- sha1_transform_feed(data);
- data += SHA1_BLOCK_SIZE;
- len -= SHA1_BLOCK_SIZE;
- sha1_transform_wait();
- }
-#endif
- goto store;
- }
-
- /* process one stored block */
- if (index) {
- clen = SHA1_BLOCK_SIZE - index;
- memcpy(sctx->buf + index, data, clen);
- sha1_transform_feed(sctx->buf);
- data += clen;
- len -= clen;
- index = 0;
- sha1_transform_wait();
- }
-
- if (likely(SEC_ALIGNED(data))) {
- goto fast_process;
- }
-
- /* process as many blocks as possible */
- if (likely(len >= SHA1_BLOCK_SIZE)) {
- memcpy(sctx->buf, data, SHA1_BLOCK_SIZE);
- do {
- sha1_transform_feed(sctx->buf);
- data += SHA1_BLOCK_SIZE;
- len -= SHA1_BLOCK_SIZE;
- if (likely(len >= SHA1_BLOCK_SIZE)) {
- memcpy(sctx->buf, data, SHA1_BLOCK_SIZE);
- sha1_transform_wait();
- continue;
- }
- /* it is the last block */
- sha1_transform_wait();
- break;
- } while (1);
- }
-
-store:
- sha1_output_digest(sctx->state);
- hw_crypto_unlock();
-
-store_only:
- /* anything left? */
- if (len)
- memcpy(sctx->buf + index , data, len);
-}
-
-/* Add padding and return the message digest. */
-static void __ocm_text sha1_final(struct crypto_tfm *tfm, u8 *out)
-{
- struct ubicom32_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
- u64 bits;
- unsigned int index, end;
-
- /* must perform manual padding */
- index = sctx->count & 0x3f;
- end = (index < 56) ? SHA1_BLOCK_SIZE : (2 * SHA1_BLOCK_SIZE);
-
- /* start pad with 1 */
- sctx->buf[index] = 0x80;
-
- /* pad with zeros */
- index++;
- memset(sctx->buf + index, 0x00, end - index - 8);
-
- /* append message length */
- bits = sctx->count << 3 ;
- SEC_COPY_2W(sctx->buf + end - 8, &bits);
-
- /* force to use the sctx->buf and ignore the partial buf */
- sctx->count = sctx->count & ~0x3f;
- sha1_update(tfm, sctx->buf, end);
-
- /* copy digest to out */
- SEC_COPY_5W(out, sctx->state);
-
- /* wipe context */
- sha1_wipe_out(sctx);
-}
-
-static struct crypto_alg alg = {
- .cra_name = "sha1",
- .cra_driver_name= "sha1-ubicom32",
- .cra_priority = CRYPTO_UBICOM32_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_DIGEST,
- .cra_blocksize = SHA1_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct ubicom32_sha1_ctx),
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(alg.cra_list),
- .cra_u = {
- .digest = {
- .dia_digestsize = SHA1_DIGEST_SIZE,
- .dia_init = sha1_init,
- .dia_update = sha1_update,
- .dia_final = sha1_final,
- }
- }
-};
-
-static int __init init(void)
-{
- hw_crypto_init();
- return crypto_register_alg(&alg);
-}
-
-static void __exit fini(void)
-{
- crypto_unregister_alg(&alg);
-}
-
-module_init(init);
-module_exit(fini);
-
-MODULE_ALIAS("sha1");
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
+++ /dev/null
-/*
- * arch/ubicom32/crypto/sha1_ubicom32_asm.S
- * SHA1 hash support for Ubicom32 architecture V3.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#define __ASM__
-#include <asm/ip5000.h>
-
-#ifndef RP
-#define RP A5
-#endif
-
-;*****************************************************************************************
-; The function prototype
-;*****************************************************************************************
-; void sha1_ip5k_init(void)
-; void sha1_ip5k_transform(u32_t *data_input)
-; void sha1_ip5k_output(u32_t *digest)
-
-;*****************************************************************************************
-; Inputs
-;*****************************************************************************************
-; data_input is the pointer to the block of data over which the digest will be calculated.
-; It should be word aligned.
-;
-; digest is the pointer to the block of data into which the digest (the output) will be written.
-; It should be word aligned.
-;
-
-;*****************************************************************************************
-; Outputs
-;*****************************************************************************************
-; None
-
-;*****************************************************************************************
-; Hash Constants
-;*****************************************************************************************
-#define HASH_SHA1_IN0 0x67452301
-#define HASH_SHA1_IN1 0xefcdab89
-#define HASH_SHA1_IN2 0x98badcfe
-#define HASH_SHA1_IN3 0x10325476
-#define HASH_SHA1_IN4 0xc3d2e1f0
-
-#define HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION 2
-#define HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1 ((1 << 5) | HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION)
-
-;*****************************************************************************************
-; An: Address Registers
-;*****************************************************************************************
-#define an_digest a4
-#define an_data_input a4
-#define an_security_block a3
-
-;*****************************************************************************************
-; Hash related defines
-;*****************************************************************************************
-#define hash_control 0x00(an_security_block)
-#define hash_control_low 0x02(an_security_block)
-#define hash_status 0x04(an_security_block)
-
-#define hash_input_0 0x30(an_security_block)
-#define hash_input_1 0x34(an_security_block)
-#define hash_input_2 0x38(an_security_block)
-#define hash_input_3 0x3c(an_security_block)
-#define hash_input_4 0x40(an_security_block)
-
-#define hash_output_0 0x70(an_security_block)
-#define hash_output_0_low 0x72(an_security_block)
-#define hash_output_1 0x74(an_security_block)
-#define hash_output_1_low 0x76(an_security_block)
-#define hash_output_2 0x78(an_security_block)
-#define hash_output_2_low 0x7a(an_security_block)
-#define hash_output_3 0x7c(an_security_block)
-#define hash_output_3_low 0x7e(an_security_block)
-#define hash_output_4 0x80(an_security_block)
-#define hash_output_4_low 0x82(an_security_block)
-
-;*****************************************************************************************
-; Assembly macros
-;*****************************************************************************************
- ; C compiler reserves RP (A5) for return address during subroutine call.
- ; Use RP to return to caller
-.macro call_return_macro
- calli RP, 0(RP)
-.endm
-
-;*****************************************************************************************
-; void sha1_ip5k_init(void)
-; initialize the output registers of the hash module
-
- ;.section .text.sha1_ip5k_init,"ax",@progbits
- .section .ocm_text,"ax",@progbits
- .global _sha1_ip5k_init
- .func sha1_ip5k_init, _sha1_ip5k_init
-
-_sha1_ip5k_init:
- moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
-
- movei hash_control, #%hi(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1)
- movei hash_control_low, #%lo(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1)
-
- movei hash_output_0, #%hi(HASH_SHA1_IN0)
- movei hash_output_0_low, #%lo(HASH_SHA1_IN0)
-
- movei hash_output_1, #%hi(HASH_SHA1_IN1)
- movei hash_output_1_low, #%lo(HASH_SHA1_IN1)
-
- movei hash_output_2, #%hi(HASH_SHA1_IN2)
- movei hash_output_2_low, #%lo(HASH_SHA1_IN2)
-
- movei hash_output_3, #%hi(HASH_SHA1_IN3)
- movei hash_output_3_low, #%lo(HASH_SHA1_IN3)
-
- movei hash_output_4, #%hi(HASH_SHA1_IN4)
- movei hash_output_4_low, #%lo(HASH_SHA1_IN4)
-
- call_return_macro
- .endfunc
-
-;*****************************************************************************************
-; void sha1_ip5k_init_digest(u32_t *hash_input)
-; initialize the output registers of the hash module
-
- ;.section .text.sha1_ip5k_init_digest,"ax",@progbits
- .section .ocm_text,"ax",@progbits
- .global _sha1_ip5k_init_digest
- .func sha1_ip5k_init_digest, _sha1_ip5k_init_digest
-
-_sha1_ip5k_init_digest:
- movea an_data_input, D0
-
- moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
-
- movei hash_control, #%hi(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1)
- movei hash_control_low, #%lo(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1)
-
- move.4 hash_output_0, (an_data_input)4++
- move.4 hash_output_1, (an_data_input)4++
- move.4 hash_output_2, (an_data_input)4++
- move.4 hash_output_3, (an_data_input)4++
- move.4 hash_output_4, (an_data_input)4++
-
- call_return_macro
- .endfunc
-
-;*****************************************************************************************
-; void sha1_ip5k_transform(u32_t *data_input)
-; performs intermediate transformation step for the hash calculation
-
- ;.section .text.sha1_ip5k_transform,"ax",@progbits
- .section .ocm_text,"ax",@progbits
- .global _sha1_ip5k_transform
- .func sha1_ip5k_transform, _sha1_ip5k_transform
-
-_sha1_ip5k_transform:
- movea an_data_input, D0
-
- moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
-
- ; Write the first 128bits (16 bytes)
- move.4 hash_input_0, (an_data_input)4++
- move.4 hash_input_1, (an_data_input)4++
- move.4 hash_input_2, (an_data_input)4++
- move.4 hash_input_3, (an_data_input)4++
- move.4 hash_input_4, D0
-
- move.4 hash_input_0, (an_data_input)4++
- move.4 hash_input_1, (an_data_input)4++
- move.4 hash_input_2, (an_data_input)4++
- move.4 hash_input_3, (an_data_input)4++
- move.4 hash_input_4, D0
-
- move.4 hash_input_0, (an_data_input)4++
- move.4 hash_input_1, (an_data_input)4++
- move.4 hash_input_2, (an_data_input)4++
- move.4 hash_input_3, (an_data_input)4++
- move.4 hash_input_4, D0
-
- move.4 hash_input_0, (an_data_input)4++
- move.4 hash_input_1, (an_data_input)4++
- move.4 hash_input_2, (an_data_input)4++
- move.4 hash_input_3, (an_data_input)4++
- move.4 hash_input_4, D0
-
- pipe_flush 0
-
-sha1_ip5k_transform_wait:
- ; wait for the module to calculate the output hash
- btst hash_status, #0
- jmpne.f sha1_ip5k_transform_wait
-
- call_return_macro
- .endfunc
-
-;*****************************************************************************************
-; void sha1_ip5k_output(u32_t *digest)
-; Return the hash of the input data
-
- ;.section .text.sha1_ip5k_output,"ax",@progbits
- .section .ocm_text,"ax",@progbits
- .global _sha1_ip5k_output
- .func sha1_ip5k_output, _sha1_ip5k_output
-
-_sha1_ip5k_output:
- movea an_digest, D0
-
- moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
-
- ; we have finished
- move.4 0(an_digest), hash_output_0
- move.4 4(an_digest), hash_output_1
- move.4 8(an_digest), hash_output_2
- move.4 12(an_digest), hash_output_3
- move.4 16(an_digest), hash_output_4
-
- call_return_macro
- .endfunc
-
-;*****************************************************************************************
-;END ;End of program code
-;*****************************************************************************************
+++ /dev/null
-/ocm_size.h
+++ /dev/null
-include include/asm-generic/Kbuild.asm
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/a.out.h
- * Definitions for Ubicom32 a.out executable format.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_A_OUT_H
-#define _ASM_UBICOM32_A_OUT_H
-
-struct exec
-{
- unsigned long a_info; /* Use macros N_MAGIC, etc for access */
- unsigned a_text; /* length of text, in bytes */
- unsigned a_data; /* length of data, in bytes */
- unsigned a_bss; /* length of uninitialized data area for file, in bytes */
- unsigned a_syms; /* length of symbol table data in file, in bytes */
- unsigned a_entry; /* start address */
- unsigned a_trsize; /* length of relocation info for text, in bytes */
- unsigned a_drsize; /* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a) ((a).a_trsize)
-#define N_DRSIZE(a) ((a).a_drsize)
-#define N_SYMSIZE(a) ((a).a_syms)
-
-#endif /* _ASM_UBICOM32_A_OUT_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/atomic.h
- * Atomic operations definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_ATOMIC_H
-#define _ASM_UBICOM32_ATOMIC_H
-
-#include <asm/system.h>
-#include <asm/ubicom32-common.h>
-#include <asm/types.h>
-
-/*
- * Most instructions on the Ubicom32 processor are atomic in that they
- * execute in one clock cycle. However, Linux has several operations
- * (e.g. compare and swap) which will require more than a single instruction
- * to perform. To achieve this, the Ubicom32 processor uses a single
- * global bit in a scratchpad register as a critical section lock. All
- * atomic operations acquire this lock.
- *
- * NOTE: To AVOID DEADLOCK(s), the atomic lock must only be used for atomic
- * operations or by the ldsr to avoid disabling a thread performing an atomic
- * operation.
- *
- * Do not attempt to disable interrupts while holding the atomic operations
- * lock or you will DEADLOCK the system.
- */
-
-#define ATOMIC_INIT(i) { (i) }
-
-/*
- * __atomic_add()
- * Add i to v and return the result.
- */
-static inline void __atomic_add(int i, atomic_t *v)
-{
- atomic_t *vt = v;
-
- __atomic_lock_acquire();
- vt->counter += i;
- __atomic_lock_release();
-}
-
-/*
- * __atomic_sub()
- * Subtract i from v and return the result.
- */
-static inline void __atomic_sub(int i, atomic_t *v)
-{
- atomic_t *vt = v;
-
- __atomic_lock_acquire();
- vt->counter -= i;
- __atomic_lock_release();
-}
-
-/*
- * __atomic_add_return()
- * Add i to v and return the result.
- *
- * The implementation here looks rather odd because we appear to be doing
- * the addition twice. In fact that's exactly what we're doing but with
- * the ubicom32 instruction set we can do the inner load and add with two
- * instructions whereas generating both the atomic result and the "ret"
- * result requires three instructions. The second add is generally only as
- * costly as a move instruction and in cases where we compare the result
- * with a constant the compiler can fold two constant values and do a
- * single instruction, thus saving an instruction overall!
- *
- * At the worst we save one instruction inside the atomic lock.
- */
-static inline int __atomic_add_return(int i, atomic_t *v)
-{
- int ret;
- atomic_t *vt = v;
-
- __atomic_lock_acquire();
- ret = vt->counter;
- vt->counter = ret + i;
- __atomic_lock_release();
-
- return ret + i;
-}
-
-/*
- * __atomic_sub_return()
- * Subtract i from v and return the result.
- *
- * The implementation here looks rather odd because we appear to be doing
- * the subtraction twice. In fact that's exactly what we're doing but with
- * the ubicom32 instruction set we can do the inner load and sub with two
- * instructions whereas generating both the atomic result and the "ret"
- * result requires three instructions. The second sub is generally only as
- * costly as a move instruction and in cases where we compare the result
- * with a constant the compiler can fold two constant values and do a
- * single instruction, thus saving an instruction overall!
- *
- * At the worst we save one instruction inside the atomic lock.
- */
-static inline int __atomic_sub_return(int i, atomic_t *v)
-{
- int ret;
- atomic_t *vt = v;
-
- __atomic_lock_acquire();
- ret = vt->counter;
- vt->counter = ret - i;
- __atomic_lock_release();
-
- return ret - i;
-}
-
-/*
- * PUBLIC API FOR ATOMIC!
- */
-#define atomic_add(i,v) (__atomic_add( ((int)i),(v)))
-#define atomic_sub(i,v) (__atomic_sub( ((int)i),(v)))
-#define atomic_inc(v) (__atomic_add( 1,(v)))
-#define atomic_dec(v) (__atomic_sub( 1,(v)))
-#define atomic_add_return(i,v) (__atomic_add_return( ((int)i),(v)))
-#define atomic_sub_return(i,v) (__atomic_sub_return( ((int)i),(v)))
-#define atomic_inc_return(v) (__atomic_add_return( 1,(v)))
-#define atomic_dec_return(v) (__atomic_sub_return( 1,(v)))
-#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
-#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
-#define atomic_sub_and_test(i,v) (atomic_sub_return((i),(v)) == 0)
-
-/*
- * atomic_read()
- * Acquire the atomic lock and read the variable.
- */
-static inline int atomic_read(const atomic_t *v)
-{
- int ret;
- const atomic_t *vt = v;
-
- __atomic_lock_acquire();
- ret = vt->counter;
- __atomic_lock_release();
-
- return ret;
-}
-
-/*
- * atomic_set()
- * Acquire the atomic lock and set the variable.
- */
-static inline void atomic_set(atomic_t *v, int i)
-{
- atomic_t *vt = v;
-
- __atomic_lock_acquire();
- vt->counter = i;
- __atomic_lock_release();
-}
-
-/*
- * atomic_cmpxchg
- * Acquire the atomic lock and exchange if current == old.
- */
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
- int prev;
- atomic_t *vt = v;
-
- __atomic_lock_acquire();
- prev = vt->counter;
- if (prev == old) {
- vt->counter = new;
- }
- __atomic_lock_release();
-
- return prev;
-}
-
-/*
- * atomic_xchg()
- * Acquire the atomic lock and exchange values.
- */
-static inline int atomic_xchg(atomic_t *v, int new)
-{
- int prev;
- atomic_t *vt = v;
-
- __atomic_lock_acquire();
- prev = vt->counter;
- vt->counter = new;
- __atomic_lock_release();
-
- return prev;
-}
-
-/*
- * atomic_add_unless()
- * Acquire the atomic lock and add a unless the value is u.
- */
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
- int prev;
- atomic_t *vt = v;
-
- __atomic_lock_acquire();
- prev = vt->counter;
- if (prev != u) {
- vt->counter += a;
- __atomic_lock_release();
- return 1;
- }
-
- __atomic_lock_release();
- return 0;
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-#include <linux/version.h>
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
-#include <asm-generic/atomic-long.h>
-#else
-#include <asm-generic/atomic.h>
-#endif
-
-/*
- * The following is not a real function. The compiler should remove the function
- * call as long as the user does not pass in a size that __xchg and __cmpxchg
- * are not prepared for. If the user does pass in an unknown size, the user
- * will get a link time error.
- *
- * The no return is to prevent a compiler error that can occur when dealing with
- * uninitialized variables. Given that the function doesn't exist there is no
- * net effect (and if it did it would not return).
- */
-extern void __xchg_called_with_bad_pointer(void) __attribute__((noreturn));
-
-/*
- * __xchg()
- * Xchange *ptr for x atomically.
- *
- * Must be both locally atomic and atomic on SMP. Ubicom32 does not have an
- * atomic exchange instruction so we use the global atomic_lock.
- */
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
-{
- unsigned long ret;
-
- __atomic_lock_acquire();
-
- switch (size) {
- case 1:
- ret = *(volatile unsigned char *)ptr;
- *(volatile unsigned char *)ptr = x;
- break;
-
- case 2:
- ret = *(volatile unsigned short *)ptr;
- *(volatile unsigned short *)ptr = x;
- break;
-
- case 4:
- ret = *(volatile unsigned int *)ptr;
- *(volatile unsigned int *)ptr = x;
- break;
-
- default:
- __xchg_called_with_bad_pointer();
- break;
- }
- __atomic_lock_release();
- return ret;
-}
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-/*
- * __cmpxchg()
- * Compare and Xchange *ptr for x atomically.
- *
- * Must be both locally atomic and atomic on SMP. Ubicom32 does not have an
- * atomic exchange instruction so we use the global atomic_lock.
- */
-static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, unsigned long next, int size)
-{
- unsigned long prev;
-
- __atomic_lock_acquire();
- switch (size) {
- case 1:
- prev = *(u8 *)ptr;
- if (prev == old) {
- *(u8 *)ptr = (u8)next;
- }
- break;
-
- case 2:
- prev = *(u16 *)ptr;
- if (prev == old) {
- *(u16 *)ptr = (u16)next;
- }
- break;
-
- case 4:
- prev = *(u32 *)ptr;
- if (prev == old) {
- *(u32 *)ptr = (u32)next;
- }
- break;
-
- default:
- __xchg_called_with_bad_pointer();
- break;
- }
- __atomic_lock_release();
- return prev;
-}
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), (unsigned long)(n), sizeof(*(ptr))))
-
-#define cmpxchg(ptr, o, n) __cmpxchg((ptr), (o), (n), sizeof(*(ptr)))
-
-#define smp_mb__before_atomic_inc() asm volatile ("" : : : "memory")
-#define smp_mb__after_atomic_inc() asm volatile ("" : : : "memory")
-#define smp_mb__before_atomic_dec() asm volatile ("" : : : "memory")
-#define smp_mb__after_atomic_dec() asm volatile ("" : : : "memory")
-
-#endif /* _ASM_UBICOM32_ATOMIC_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/audio.h
- * Audio include file
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef _AUDIO_H
-#define _AUDIO_H
-
-#include <asm/devtree.h>
-#include <asm/audionode.h>
-
-/*
- * Resource indices used to access IRQs via platform_get_resource
- */
-#define AUDIO_MEM_RESOURCE 0
-#define AUDIO_TX_IRQ_RESOURCE 0
-#define AUDIO_RX_IRQ_RESOURCE 1
-
-extern struct platform_device * __init audio_device_alloc(const char *driver_name, const char *node_name, const char *inst_name, int priv_size);
-
-#define audio_device_priv(pdev) (((struct ubi32pcm_platform_data *)(((struct platform_device *)(pdev))->dev.platform_data))->priv_data)
-#endif
+++ /dev/null
-/*
- * audionode.h
- * audionode and DMA descriptors
- *
- * Copyright \81© 2009 Ubicom Inc. <www.ubicom.com>. All rights reserved.
- *
- * This file contains confidential information of Ubicom, Inc. and your use of
- * this file is subject to the Ubicom Software License Agreement distributed with
- * this file. If you are uncertain whether you are an authorized user or to report
- * any unauthorized use, please contact Ubicom, Inc. at +1-408-789-2200.
- * Unauthorized reproduction or distribution of this file is subject to civil and
- * criminal penalties.
- *
- */
-#ifndef _AUDIONODE_H_
-#define _AUDIONODE_H_
-
-#define AUDIO_INT_FLAG_MORE_SAMPLES 0x00000001
-#define AUDIO_INT_FLAG_COMMAND 0x00000002
-
-/*
- * Commands the Primary OS sends to the audio device
- */
-enum audio_command {
- AUDIO_CMD_NONE,
- AUDIO_CMD_START,
- AUDIO_CMD_STOP,
- AUDIO_CMD_PAUSE,
- AUDIO_CMD_RESUME,
- AUDIO_CMD_MUTE,
- AUDIO_CMD_UNMUTE,
- AUDIO_CMD_SETUP,
- AUDIO_CMD_ENABLE,
- AUDIO_CMD_DISABLE,
-};
-
-/*
- * Flag bits passed in the registers
- */
-#define CMD_START_FLAG_LE (1 << 0) /* Use Little Endian Mode */
-
-/*
- * Status bits that audio device can set to indicate reason
- * for interrupting the Primary OS
- */
-#define AUDIO_STATUS_PLAY_DMA0_REQUEST (1 << 0) /* Audio device needs samples in DMA0 for playback */
-#define AUDIO_STATUS_PLAY_DMA1_REQUEST (1 << 1) /* Audio device needs samples in DMA1 for playback */
-
-struct audio_dma {
- /*
- * NOTE: The active flag shall only be SET by the producer and CLEARED
- * by the consumer, NEVER the other way around. For playback, the
- * Primary OS sets this flag and ipAudio clears it.
- *
- * The producer shall not modify the ptr or ctr fields when the transfer
- * is marked as active, as these are used by the consumer to do the
- * transfer.
- */
- volatile u32_t active; /* Nonzero if data in ptr/ctr ready to be transferred */
- volatile void *ptr; /* Pointer to data to be transferred */
- volatile u32_t ctr; /* Counter: number of data units to transfer */
-};
-
-#define AUDIONODE_CAP_BE (1 << 0)
-#define AUDIONODE_CAP_LE (1 << 1)
-
-#define AUDIONODE_VERSION 7
-struct audio_node {
- struct devtree_node dn;
-
- /*
- * Version of this node
- */
- u32_t version;
-
- /*
- * Pointer to the registers
- */
- struct audio_regs *regs;
-};
-
-/*
- * [OCM] Audio registers
- * Registers exposed as part of our MMIO area
- */
-#define AUDIO_REGS_VERSION 7
-struct audio_regs {
- /*
- * Version of this register set
- */
- u32_t version;
-
- /*
- * Interrupt status
- */
- volatile u32_t int_status;
-
- /*
- * Interrupt request
- */
- volatile u32_t int_req;
-
- /*
- * Current IRQ being serviced
- */
- u32_t cur_irq;
-
- /*
- * Maximum number of devices supported
- */
- u32_t max_devs;
-
- /*
- * [DDR] Device registers for each of the devices
- */
- struct audio_dev_regs *adr;
-};
-
-#define AUDIO_DEV_REGS_VERSION 2
-struct audio_dev_regs {
- u32_t version; /* Version of this register set */
-
- u8_t name[32]; /* Name of this driver */
- u32_t caps; /* Capabilities of this driver */
- const u32_t *sample_rates; /* Sample Rates supported by this driver */
- u32_t n_sample_rates; /* Number of sample rates supported by this driver */
- u32_t channel_mask; /* A bit set in a particular position means we support this channel configuration */
- volatile u32_t int_flags; /* Reason for interrupting audio device */
- volatile enum audio_command command; /* Command from Primary OS */
- volatile u32_t flags; /* Flag bits for this command */
- volatile u32_t channels; /* Number of channels */
- volatile u32_t sample_rate; /* Sample rate */
- volatile u32_t status; /* Status bits sent from ipAudio to Primary OS */
- void *primary_os_buffer_ptr; /*
- * Playback: Pointer to next sample to be removed from
- * Primary OS sample buffer
- * Capture: Pointer to where next sample will be inserted
- * into Primary OS sample buffer
- */
-
- /*
- * These are the transfer requests. They are used in alternating
- * order so that when ipAudio is processing one request, the
- * Primary OS can fill in the other one.
- *
- * NOTE: The active bit shall always be SET by the producer and
- * CLEARED by the consumer, NEVER the other way around.
- */
- struct audio_dma dma_xfer_requests[2];
-};
-
-#endif
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/auxvec.h
- * Symbolic values for the entries in the auxiliary table
- * put on the initial stack.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_AUXVEC_H
-#define _ASM_UBICOM32_AUXVEC_H
-
-#endif /* _ASM_UBICOM32_AUXVEC_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/bitops.h
- * Bit manipulation definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_BITOPS_H
-#define _ASM_UBICOM32_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#include <linux/compiler.h>
-#include <asm/byteorder.h> /* swab32 */
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/__ffs.h>
-
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/ffz.h>
-
-#include <asm/ubicom32-common.h>
-
-static inline void set_bit(int bit, volatile unsigned long *p)
-{
- unsigned long mask = 1UL << (bit & 31);
-
- p += bit >> 5;
-
- __atomic_lock_acquire();
- *p |= mask;
- __atomic_lock_release();
-}
-
-static inline void clear_bit(int bit, volatile unsigned long *p)
-{
- unsigned long mask = 1UL << (bit & 31);
-
- p += bit >> 5;
-
- __atomic_lock_acquire();
- *p &= ~mask;
- __atomic_lock_release();
-}
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit() barrier()
-#define smp_mb__after_clear_bit() barrier()
-
-static inline void change_bit(int bit, volatile unsigned long *p)
-{
- unsigned long mask = 1UL << (bit & 31);
-
- p += bit >> 5;
-
- __atomic_lock_acquire();
- *p ^= mask;
- __atomic_lock_release();
-}
-
-static inline int test_and_set_bit(int bit, volatile unsigned long *p)
-{
- unsigned int res;
- unsigned long mask = 1UL << (bit & 31);
-
- p += bit >> 5;
-
- __atomic_lock_acquire();
- res = *p;
- *p = res | mask;
- __atomic_lock_release();
-
- return res & mask;
-}
-
-static inline int test_and_clear_bit(int bit, volatile unsigned long *p)
-{
- unsigned int res;
- unsigned long mask = 1UL << (bit & 31);
-
- p += bit >> 5;
-
- __atomic_lock_acquire();
- res = *p;
- *p = res & ~mask;
- __atomic_lock_release();
-
- return res & mask;
-}
-
-static inline int test_and_change_bit(int bit, volatile unsigned long *p)
-{
- unsigned int res;
- unsigned long mask = 1UL << (bit & 31);
-
- p += bit >> 5;
-
- __atomic_lock_acquire();
- res = *p;
- *p = res ^ mask;
- __atomic_lock_release();
-
- return res & mask;
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-/*
- * This routine doesn't need to be atomic.
- */
-static inline int __constant_test_bit(int nr, const volatile unsigned long *addr)
-{
- return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
-}
-
-static inline int __test_bit(int nr, const volatile unsigned long *addr)
-{
- int * a = (int *) addr;
- int mask;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
- return ((mask & *a) != 0);
-}
-
-#define test_bit(nr,addr) (__builtin_constant_p(nr) ? __constant_test_bit((nr),(addr)) : __test_bit((nr),(addr)))
-
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-#include <asm-generic/bitops/ext2-non-atomic.h>
-#include <asm-generic/bitops/ext2-atomic.h>
-#include <asm-generic/bitops/minix.h>
-
-#endif /* __KERNEL__ */
-
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#endif /* _ASM_UBICOM32_BITOPS_H */
+++ /dev/null
-#include <asm-generic/bitsperlong.h>
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/board.h
- * Board init and revision definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_BOARD_H
-#define _ASM_UBICOM32_BOARD_H
-
-extern const char *board_get_revision(void);
-extern void __init board_init(void);
-
-#endif /* _ASM_UBICOM32_BOARD_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/bootargs.h
- * Kernel command line via the devtree API.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_BOOTARGS_H
-#define _ASM_UBICOM32_BOOTARGS_H
-
-extern const char *bootargs_get_cmdline(void);
-extern void __init bootargs_init(void);
-
-#endif /* _ASM_UBICOM32_BOOTARGS_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/bootinfo.h
- * Definitions of firmware boot parameters passed to the kernel.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#ifndef _ASM_UBICOM32_BOOTINFO_H
-#define _ASM_UBICOM32_BOOTINFO_H
-
-/* Nothing for ubicom32 */
-
-#endif /* _ASM_UBICOM32_BOOTINFO_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/bug.h
- * Generic bug.h for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_BUG_H
-#define _ASM_UBICOM32_BUG_H
-
-#include <linux/kernel.h>
-#include <asm/thread.h>
-
-#if defined(CONFIG_BUG) && defined(CONFIG_STOP_ON_BUG)
-
-/*
- * BUG()
- * Ubicom specific version of the BUG() macro.
- *
- * This implementation performs a THREAD_STALL stopping all threads before
- * calling panic. This enables a developer to see the "real" state of the
- * machine (since panic alters the system state). We do the printf first
- * because while it is slow, it does not alter system state (like
- * interrupts).
- *
- * TODO: Implement the trap sequence used by other architectures.
- */
-#define BUG() do { \
- printk("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
- THREAD_STALL; \
- panic("BUG!"); \
-} while (0)
-
-
-/*
- * __WARN()
- * WARN() using printk() for now.
- *
- * TODO: Implement the trap sequence used by other architectures.
- */
-#define __WARN() \
- do { \
- printk("WARN: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
- } while(0)
-
-/*
- * WARN_ON()
- * Ubicom specific version of the WARN_ON macro.
- *
- * This implementation performs a printk for the WARN_ON() instead
- * of faulting into the kernel and using report_bug().
- *
- * TODO: Implement the trap sequence used by other architectures.
- */
-#define WARN_ON(x) ({ \
- int __ret_warn_on = !!(x); \
- if (__builtin_constant_p(__ret_warn_on)) { \
- if (__ret_warn_on) \
- __WARN(); \
- } else { \
- if (unlikely(__ret_warn_on)) \
- __WARN(); \
- } \
- unlikely(__ret_warn_on); \
-})
-
-
-#define HAVE_ARCH_BUG
-#define HAVE_ARCH_WARN_ON
-
-#endif
-
-#include <asm-generic/bug.h>
-
-#endif /* _ASM_UBICOM32_BUG_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/bugs.h
- * Definition of check_bugs() for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 1994 Linus Torvalds
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- * void check_bugs(void);
- */
-
-#ifndef _ASM_UBICOM32_BUGS_H
-#define _ASM_UBICOM32_BUGS_H
-
-static void check_bugs(void)
-{
-}
-
-#endif /* _ASM_UBICOM32_BUGS_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/byteorder.h
- * Byte order swapping utility routines.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_BYTEORDER_H
-#define _ASM_UBICOM32_BYTEORDER_H
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _ASM_UBICOM32_BYTEORDER_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/cache.h
- * Cache line definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_CACHE_H
-#define _ASM_UBICOM32_CACHE_H
-
-/*
- * bytes per L1 cache line
- */
-#define L1_CACHE_SHIFT 5
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
-#define __cacheline_aligned
-#define ____cacheline_aligned
-
-#endif /* _ASM_UBICOM32_CACHE_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/cachectl.h
- * Ubicom32 cache control definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_CACHECTL_H
-#define _ASM_UBICOM32_CACHECTL_H
-
-#include <asm/ip5000.h>
-
-/*
- * mem_cache_control()
- * Special cache control operation
- */
-extern void mem_cache_control(unsigned long cc, unsigned long begin_addr, unsigned long end_addr, unsigned long op);
-
-#endif /* _ASM_UBICOM32_CACHECTL_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/cacheflush.h
- * Cache flushing definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_CACHEFLUSH_H
-#define _ASM_UBICOM32_CACHEFLUSH_H
-
-/*
- * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
- */
-#include <linux/mm.h>
-#include <asm/cachectl.h>
-#include <asm/ip5000.h>
-
-#define flush_cache_all() __flush_cache_all()
-#define flush_cache_mm(mm) do { } while (0)
-#define flush_cache_dup_mm(mm) do { } while (0)
-#define flush_cache_range(vma, start, end) __flush_cache_all()
-#define flush_cache_page(vma, vmaddr) do { } while (0)
-#define flush_dcache_page(page) do { } while (0)
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-
-#define flush_dcache_range(start, end) \
-do { \
- /* Flush the data cache and invalidate the I cache. */ \
- mem_cache_control(DCCR_BASE, start, end, CCR_CTRL_FLUSH_ADDR); \
- mem_cache_control(ICCR_BASE, start, end, CCR_CTRL_INV_ADDR); \
-} while (0)
-
-#define flush_icache_range(start, end) \
-do { \
- /* Flush the data cache and invalidate the I cache. */ \
- mem_cache_control(DCCR_BASE, start, end, CCR_CTRL_FLUSH_ADDR); \
- mem_cache_control(ICCR_BASE, start, end, CCR_CTRL_INV_ADDR); \
-} while (0)
-
-#define flush_icache_page(vma,pg) do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
-#define flush_cache_vmap(start, end) do { } while (0)
-#define flush_cache_vunmap(start, end) do { } while (0)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-
-/*
- * Cache handling for IP5000
- */
-extern inline void mem_cache_invalidate_all(unsigned long cc)
-{
- if (cc == DCCR_BASE)
- UBICOM32_LOCK(DCCR_LOCK_BIT);
- else
- UBICOM32_LOCK(ICCR_LOCK_BIT);
-
- asm volatile (
- " bset "D(CCR_CTRL)"(%0), "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_RESET)" \n\t"
- " nop \n\t"
- " bclr "D(CCR_CTRL)"(%0), "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_RESET)" \n\t"
- " pipe_flush 0 \n\t"
- :
- : "a"(cc)
- : "cc"
- );
-
- if (cc == DCCR_BASE)
- UBICOM32_UNLOCK(DCCR_LOCK_BIT);
- else
- UBICOM32_UNLOCK(ICCR_LOCK_BIT);
-
-}
-
-static inline void __flush_cache_all(void)
-{
- /*
- * Flush Icache
- */
- mem_cache_invalidate_all(ICCR_BASE);
-
- /*
- * Flush Dcache
- */
- mem_cache_invalidate_all(DCCR_BASE);
-}
-
-#endif /* _ASM_UBICOM32_CACHEFLUSH_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/checksum.h
- * Checksum utilities for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_CHECKSUM_H
-#define _ASM_UBICOM32_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum csum_partial_copy_nocheck(const void *src, void *dst,
- int len, __wsum sum);
-
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src,
- void *dst, int len, __wsum sum, int *csum_err);
-
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- * Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
- asm volatile (
- " lsr.4 d15, %0, #16 \n\t"
- " bfextu %0, %0, #16 \n\t"
- " add.4 %0, d15, %0 \n\t"
- " lsr.4 d15, %0, #16 \n\t"
- " bfextu %0, %0, #16 \n\t"
- " add.4 %0, d15, %0 \n\t"
- : "=&d" (sum)
- : "0"(sum)
- : "d15"
- );
- return (__force __sum16)~sum;
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- asm volatile (
- " add.4 %0, %2, %0 \n\t"
- " addc %0, %3, %0 \n\t"
- " addc %0, %4, %0 \n\t"
- " addc %0, %5, %0 \n\t"
- " addc %0, #0, %0 \n\t"
- : "=&d" (sum)
- : "0"(sum), "r" (saddr), "r" (daddr), "r" (len), "r"(proto)
- );
- return sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-#define _HAVE_ARCH_IPV6_CSUM
-
-static __inline__ __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
- __u32 len, unsigned short proto, __wsum sum)
-{
- asm volatile (
- " add.4 %0, 0(%2), %0 \n\t"
- " addc %0, 4(%2), %0 \n\t"
- " addc %0, 8(%2), %0 \n\t"
- " addc %0, 12(%2), %0 \n\t"
- " addc %0, 0(%3), %0 \n\t"
- " addc %0, 4(%3), %0 \n\t"
- " addc %0, 8(%3), %0 \n\t"
- " addc %0, 12(%3), %0 \n\t"
- " addc %0, %4, %0 \n\t"
- " addc %0, #0, %0 \n\t"
- : "=&d" (sum)
- : "0" (sum), "a" (saddr), "a" (daddr), "d" (len + proto)
- );
- return csum_fold(sum);
-}
-
-#endif /* _ASM_UBICOM32_CHECKSUM_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/cpu.h
- * CPU definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 2004-2005 ARM Ltd.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_CPU_H
-#define _ASM_UBICOM32_CPU_H
-
-#include <linux/percpu.h>
-
-struct cpuinfo_ubicom32 {
- unsigned long tid; /* Hardware thread number */
-
-#ifdef CONFIG_SMP
- volatile unsigned long ipi_pending; /* Bit map of operations to execute */
- unsigned long ipi_count; /* Number of IPI(s) taken on this cpu */
-#endif
-};
-
-DECLARE_PER_CPU(struct cpuinfo_ubicom32, cpu_data);
-
-#endif /* _ASM_UBICOM32_CPU_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/cputime.h
- * Generic cputime.h for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_CPUTIME_H
-#define _ASM_UBICOM32_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* _ASM_UBICOM32_CPUTIME_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/current.h
- * Definition of get_current() for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * (C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org>
- * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_CURRENT_H
-#define _ASM_UBICOM32_CURRENT_H
-
-#include <linux/thread_info.h>
-
-struct task_struct;
-
-static inline struct task_struct *get_current(void)
-{
- return(current_thread_info()->task);
-}
-
-#define current get_current()
-
-#endif /* _ASM_UBICOM32_CURRENT_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/delay.h
- * Definition of delay routines for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_DELAY_H
-#define _ASM_UBICOM32_DELAY_H
-
-#include <asm/param.h>
-#include <asm/ip5000.h>
-
-static inline void __delay(unsigned long loops)
-{
- if (loops == 0) {
- return;
- }
-
- asm volatile (
- "1: add.4 %0, #-1, %0 \n\t"
- " jmpne.t 1b \n\t"
- : "+d" (loops)
- );
-}
-
-/*
- * Ubicom32 processor uses fixed 12MHz external OSC.
- * So we use that as reference to count 12 cycles/us
- */
-
-extern unsigned long loops_per_jiffy;
-
-static inline void _udelay(unsigned long usecs)
-{
-#if defined(CONFIG_UBICOM32_V4) || defined(CONFIG_UBICOM32_V3)
- asm volatile (
- " add.4 d15, 0(%0), %1 \n\t"
- " sub.4 #0, 0(%0), d15 \n\t"
- " jmpmi.w.f .-4 \n\t"
- :
- : "a"(TIMER_BASE + TIMER_MPTVAL), "d"(usecs * (12000000/1000000))
- : "d15"
- );
-#else
- BUG();
-#endif
-}
-
-/*
- * Moved the udelay() function into library code, no longer inlined.
- */
-extern void udelay(unsigned long usecs);
-
-#endif /* _ASM_UBICOM32_DELAY_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/device.h
- * Generic device.h for Ubicom32 architecture.
- *
- * Used for arch specific extensions to struct device
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_DEVICE_H
-#define _ASM_UBICOM32_DEVICE_H
-
-#include <asm-generic/device.h>
-
-#endif /* _ASM_UBICOM32_DEVICE_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/devtree.h
- * Device Tree Header File (Shared between ultra and the Host OS)
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#ifndef _ASM_UBICOM32_DEVTREE_H
-#define _ASM_UBICOM32_DEVTREE_H
-
-#define DEVTREE_MAX_NAME 32
-#define DEVTREE_IRQ_NONE 0xff
-#define DEVTREE_IRQ_DONTCARE 0xff
-#define DEVTREE_NODE_MAGIC 0x10203040
-
-struct devtree_node {
- struct devtree_node *next;
- unsigned char sendirq;
- unsigned char recvirq;
- char name[DEVTREE_MAX_NAME];
- unsigned int magic;
-};
-
-extern struct devtree_node *devtree;
-extern struct devtree_node *devtree_find_by_irq(uint8_t sendirq, uint8_t recvirq);
-extern struct devtree_node *devtree_find_node(const char *str);
-extern struct devtree_node *devtree_find_next(struct devtree_node **cur);
-extern int devtree_irq(struct devtree_node *dn, unsigned char *sendirq, unsigned char *recvirq);
-extern void devtree_print(void);
-
-#endif /* _ASM_UBICOM32_DEVTREE_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/div64.h
- * Generic div64.h for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_DIV64_H
-#define _ASM_UBICOM32_DIV64_H
-
-#include <asm-generic/div64.h>
-
-#endif /* _ASM_UBICOM32_DIV64_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/dma-mapping.h
- * Generic dma-mapping.h for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_DMA_MAPPING_H
-#define _ASM_UBICOM32_DMA_MAPPING_H
-
-#include <linux/scatterlist.h>
-#ifdef CONFIG_PCI
-
-/* we implement the API below in terms of the existing PCI one,
- * so include it */
-#include <linux/pci.h>
-/* need struct page definitions */
-#include <linux/mm.h>
-
-static inline int
-dma_supported(struct device *dev, u64 mask)
-{
- BUG_ON(dev->bus != &pci_bus_type);
-
- return pci_dma_supported(to_pci_dev(dev), mask);
-}
-
-static inline int
-dma_set_mask(struct device *dev, u64 dma_mask)
-{
- BUG_ON(dev->bus != &pci_bus_type);
-
- return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
-}
-
-static inline void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
- gfp_t flag)
-{
- BUG_ON(dev->bus != &pci_bus_type);
-
- return pci_alloc_consistent(to_pci_dev(dev), size, dma_handle);
-}
-
-static inline void
-dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
- dma_addr_t dma_handle)
-{
- BUG_ON(dev->bus != &pci_bus_type);
-
- pci_free_consistent(to_pci_dev(dev), size, cpu_addr, dma_handle);
-}
-
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *cpu_addr, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(dev->bus != &pci_bus_type);
-
- return pci_map_single(to_pci_dev(dev), cpu_addr, size, (int)direction);
-}
-
-static inline void
-dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(dev->bus != &pci_bus_type);
-
- pci_unmap_single(to_pci_dev(dev), dma_addr, size, (int)direction);
-}
-
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(dev->bus != &pci_bus_type);
-
- return pci_map_page(to_pci_dev(dev), page, offset, size, (int)direction);
-}
-
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(dev->bus != &pci_bus_type);
-
- pci_unmap_page(to_pci_dev(dev), dma_address, size, (int)direction);
-}
-
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction direction)
-{
- BUG_ON(dev->bus != &pci_bus_type);
-
- return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction);
-}
-
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
- enum dma_data_direction direction)
-{
- BUG_ON(dev->bus != &pci_bus_type);
-
- pci_unmap_sg(to_pci_dev(dev), sg, nhwentries, (int)direction);
-}
-
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(dev->bus != &pci_bus_type);
-
- pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle,
- size, (int)direction);
-}
-
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(dev->bus != &pci_bus_type);
-
- pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle,
- size, (int)direction);
-}
-
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
- enum dma_data_direction direction)
-{
- BUG_ON(dev->bus != &pci_bus_type);
-
- pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg, nelems, (int)direction);
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
- enum dma_data_direction direction)
-{
- BUG_ON(dev->bus != &pci_bus_type);
-
- pci_dma_sync_sg_for_device(to_pci_dev(dev), sg, nelems, (int)direction);
-}
-
-static inline int
-dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
- return pci_dma_mapping_error(to_pci_dev(dev), dma_addr);
-}
-
-
-#else
-
-static inline int
-dma_supported(struct device *dev, u64 mask)
-{
- return 0;
-}
-
-static inline int
-dma_set_mask(struct device *dev, u64 dma_mask)
-{
- BUG();
- return 0;
-}
-
-static inline void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
- gfp_t flag)
-{
- BUG();
- return NULL;
-}
-
-static inline void
-dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
- dma_addr_t dma_handle)
-{
- BUG();
-}
-
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *cpu_addr, size_t size,
- enum dma_data_direction direction)
-{
- BUG();
- return 0;
-}
-
-static inline void
-dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction direction)
-{
- BUG();
-}
-
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- BUG();
- return 0;
-}
-
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
- enum dma_data_direction direction)
-{
- BUG();
-}
-
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction direction)
-{
- BUG();
- return 0;
-}
-
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
- enum dma_data_direction direction)
-{
- BUG();
-}
-
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-{
- BUG();
-}
-
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-{
- BUG();
-}
-
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
- enum dma_data_direction direction)
-{
- BUG();
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
- enum dma_data_direction direction)
-{
- BUG();
-}
-
-static inline int
-dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
- return 0;
-}
-
-#endif
-
-/* Now for the API extensions over the pci_ one */
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#define dma_is_consistent(d, h) (1)
-
-static inline int
-dma_get_cache_alignment(void)
-{
- /* no easy way to get cache size on all processors, so return
- * the maximum possible, to be safe */
- return (1 << INTERNODE_CACHE_SHIFT);
-}
-
-static inline void
-dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- /* just sync everything, that's all the pci API can do */
- dma_sync_single_for_cpu(dev, dma_handle, offset+size, direction);
-}
-
-static inline void
-dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- /* just sync everything, that's all the pci API can do */
- dma_sync_single_for_device(dev, dma_handle, offset+size, direction);
-}
-
-static inline void
-dma_cache_sync(struct device *dev, void *vaddr, size_t size,
- enum dma_data_direction direction)
-{
- /* could define this in terms of the dma_cache ... operations,
- * but if you get this on a platform, you should convert the platform
- * to using the generic device DMA API */
- BUG();
-}
-
-#endif /* _ASM_UBICOM32_DMA_MAPPING_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/dma.h
- * DMA definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_DMA_H
-#define _ASM_UBICOM32_DMA_H
-
-/* Nothing so far */
-#define MAX_DMA_ADDRESS 0x00 /* This is quite suspicious */
-
-#endif /* _ASM_UBICOM32_DMA_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/elf.h
- * Definitions for elf executable format for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_ELF_H
-#define _ASM_UBICOM32_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/*
- * Processor specific flags for the ELF header e_flags field.
- */
-#define EF_UBICOM32_V3 0x00000001 /* -fmarch=ubicom32v3 */
-#define EF_UBICOM32_V4 0x00000002 /* -fmarch=ubicom32v4 */
-#define EF_UBICOM32_PIC 0x80000000 /* -fpic */
-#define EF_UBICOM32_FDPIC 0x40000000 /* -mfdpic */
-
-/*
- * Ubicom32 ELF relocation types
- */
-#define R_UBICOM32_NONE 0
-#define R_UBICOM32_16 1
-#define R_UBICOM32_32 2
-#define R_UBICOM32_LO16 3
-#define R_UBICOM32_HI16 4
-#define R_UBICOM32_21_PCREL 5
-#define R_UBICOM32_24_PCREL 6
-#define R_UBICOM32_HI24 7
-#define R_UBICOM32_LO7_S 8
-#define R_UBICOM32_LO7_2_S 9
-#define R_UBICOM32_LO7_4_S 10
-#define R_UBICOM32_LO7_D 11
-#define R_UBICOM32_LO7_2_D 12
-#define R_UBICOM32_LO7_4_D 13
-#define R_UBICOM32_32_HARVARD 14
-#define R_UBICOM32_LO7_CALLI 15
-#define R_UBICOM32_LO16_CALLI 16
-#define R_UBICOM32_GOT_HI24 17
-#define R_UBICOM32_GOT_LO7_S 18
-#define R_UBICOM32_GOT_LO7_2_S 19
-#define R_UBICOM32_GOT_LO7_4_S 20
-#define R_UBICOM32_GOT_LO7_D 21
-#define R_UBICOM32_GOT_LO7_2_D 22
-#define R_UBICOM32_GOT_LO7_4_D 23
-#define R_UBICOM32_FUNCDESC_GOT_HI24 24
-#define R_UBICOM32_FUNCDESC_GOT_LO7_S 25
-#define R_UBICOM32_FUNCDESC_GOT_LO7_2_S 26
-#define R_UBICOM32_FUNCDESC_GOT_LO7_4_S 27
-#define R_UBICOM32_FUNCDESC_GOT_LO7_D 28
-#define R_UBICOM32_FUNCDESC_GOT_LO7_2_D 29
-#define R_UBICOM32_FUNCDESC_GOT_LO7_4_D 30
-#define R_UBICOM32_GOT_LO7_CALLI 31
-#define R_UBICOM32_FUNCDESC_GOT_LO7_CALLI 32
-#define R_UBICOM32_FUNCDESC_VALUE 33
-#define R_UBICOM32_FUNCDESC 34
-#define R_UBICOM32_GOTOFFSET_LO 35
-#define R_UBICOM32_GOTOFFSET_HI 36
-#define R_UBICOM32_FUNCDESC_GOTOFFSET_LO 37
-#define R_UBICOM32_FUNCDESC_GOTOFFSET_HI 38
-#define R_UBICOM32_GNU_VTINHERIT 200
-#define R_UBICOM32_GNU_VTENTRY 201
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_ubicom32fp_struct elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_UBICOM32)
-
-#define elf_check_fdpic(x) ((x)->e_flags & EF_UBICOM32_FDPIC)
-
-#define elf_check_const_displacement(x) ((x)->e_flags & EF_UBICOM32_PIC)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#define ELF_DATA ELFDATA2MSB
-#define ELF_ARCH EM_UBICOM32
-
-/* For SVR4/m68k the function pointer to be registered with `atexit' is
- passed in %a1. Although my copy of the ABI has no such statement, it
- is actually used on ASV. */
-#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0
-
-#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, \
- _dynamic_addr) \
- do { \
- _regs->dn[1] = _exec_map_addr; \
- _regs->dn[2] = _interp_map_addr; \
- _regs->dn[3] = _dynamic_addr; \
- _regs->an[1] = 0; /* dl_fini will be set by ldso */ \
- } while (0)
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE 4096
-
-#ifdef __KERNEL__
-#ifdef CONFIG_UBICOM32_V4
-#define ELF_FDPIC_CORE_EFLAGS (EF_UBICOM32_FDPIC | EF_UBICOM32_V4)
-#elif defined CONFIG_UBICOM32_V3
-#define ELF_FDPIC_CORE_EFLAGS (EF_UBICOM32_FDPIC | EF_UBICOM32_V3)
-#else
-#error Unknown/Unsupported ubicom32 architecture.
-#endif
-#endif
-
-/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
- use of this is to invoke "./ld.so someprog" to test out a new version of
- the loader. We need to make sure that it is out of the way of the program
- that it will "exec", and that there is sufficient room for the brk. */
-
-#define ELF_ET_DYN_BASE 0xD0000000UL
-
-/*
- * For Ubicom32, the elf_gregset_t and struct pt_regs are the same size
- * data structure so a copy is performed instead of providing the
- * ELF_CORE_COPY_REGS macro.
- */
-
-/*
- * ELF_CORE_COPY_TASK_REGS is needed to dump register state from multi threaded user projects.
- */
-extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
-#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
-
-/* This yields a mask that user programs can use to figure out what
- instruction set this cpu supports. */
-
-#define ELF_HWCAP (0)
-
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo. */
-
-#define ELF_PLATFORM (NULL)
-
-#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
-
-#endif /* _ASM_UBICOM32_ELF_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/emergency-restart.h
- * Generic emergency-restart.h for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_EMERGENCY_RESTART_H
-#define _ASM_UBICOM32_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_UBICOM32_EMERGENCY_RESTART_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/entry.h
- * Entry register/stack definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_ENTRY_H
-#define _ASM_UBICOM32_ENTRY_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#endif /* _ASM_UBICOM32_ENTRY_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/errno.h
- * Generic errno.h for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_ERRNO_H
-#define _ASM_UBICOM32_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* _ASM_UBICOM32_ERRNO_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/fb.h
- * Definition of fb_is_primary_device() for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_FB_H
-#define _ASM_UBICOM32_FB_H
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
- return 0;
-}
-
-#endif /* _ASM_UBICOM32_FB_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/fcntl.h
- * File control bit definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_FCNTL_H
-#define _ASM_UBICOM32_FCNTL_H
-
-#define O_DIRECTORY 040000 /* must be a directory */
-#define O_NOFOLLOW 0100000 /* don't follow links */
-#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */
-#define O_LARGEFILE 0400000
-
-#include <asm-generic/fcntl.h>
-
-#endif /* _ASM_UBICOM32_FCNTL_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/flat.h
- * Definitions to support flat-format executables.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#ifndef _ASM_UBICOM32_FLAT_H
-#define _ASM_UBICOM32_FLAT_H
-
-#define ARCH_FLAT_ALIGN 0x80
-#define ARCH_FLAT_ALIGN_TEXT 1
-
-#define R_UBICOM32_32 2
-#define R_UBICOM32_HI24 7
-#define R_UBICOM32_LO7_S 8
-#define R_UBICOM32_LO7_2_S 9
-#define R_UBICOM32_LO7_4_S 10
-#define R_UBICOM32_LO7_D 11
-#define R_UBICOM32_LO7_2_D 12
-#define R_UBICOM32_LO7_4_D 13
-#define R_UBICOM32_LO7_CALLI 15
-#define R_UBICOM32_LO16_CALLI 16
-
-extern void ubicom32_flat_put_addr_at_rp(unsigned long *rp, u32_t val, u32_t rval, unsigned long *p);
-extern unsigned long ubicom32_flat_get_addr_from_rp(unsigned long *rp, u32_t relval, u32_t flags, unsigned long *p);
-
-#define flat_stack_align(sp) /* nothing needed */
-#define flat_argvp_envp_on_stack() 1
-#define flat_old_ram_flag(flags) (flags)
-#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags, p) (ubicom32_flat_get_addr_from_rp(rp, relval,flags, p))
-#define flat_put_addr_at_rp(rp, val, relval) do {ubicom32_flat_put_addr_at_rp(rp, val, relval, &persistent);} while(0)
-#define flat_get_relocate_addr(rel) ((persistent) ? (persistent & 0x07ffffff) : (rel & 0x07ffffff))
-
-static inline int flat_set_persistent(unsigned int relval, unsigned long *p)
-{
- if (*p) {
- return 0;
- } else {
- if ((relval >> 27) != R_UBICOM32_32) {
- /*
- * Something other than UBICOM32_32. The next entry has the relocation.
- */
- *p = relval;
- return 1;
- }
- }
- return 0;
-}
-
-#endif /* _ASM_UBICOM32_FLAT_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/fpu.h
- * Floating point state definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_FPU_H
-#define _ASM_UBICOM32_FPU_H
-
-/*
- * MAX floating point unit state size (FSAVE/FRESTORE)
- */
-/* No FP unit present then... */
-#define FPSTATESIZE (2) /* dummy size */
-
-#endif /* _ASM_UBICOM32_FPU_H */
+++ /dev/null
-/* empty */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/futex.h
- * Generic futex.h for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_FUTEX_H
-#define _ASM_UBICOM32_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif /* _ASM_UBICOM32_FUTEX_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/gpio.h
- * Definitions for GPIO operations on Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_GPIO_H
-#define _ASM_UBICOM32_GPIO_H
-
-#include <linux/compiler.h>
-#include <asm/irq.h>
-
-#include <asm/ip5000.h>
-
-#define ARCH_NR_GPIOS 512
-#define MAX_UBICOM_ONCHIP_GPIO (9 * 32)
-
-/*
- * Macros for manipulating GPIO numbers
- */
-#define gpio_bit(gn) (1 << (gn & 0x1f))
-#define gpio_bank(gn) (gn >> 5)
-
-#define gpio_pin_index(gn) (gn & 0x1f)
-#define gpio_port_index(gn) (gn >> 5)
-
-#define GPIO_RA_0 ((32 * 0) + 0)
-#define GPIO_RA_1 ((32 * 0) + 1)
-#define GPIO_RA_2 ((32 * 0) + 2)
-#define GPIO_RA_3 ((32 * 0) + 3)
-#define GPIO_RA_4 ((32 * 0) + 4)
-#define GPIO_RA_5 ((32 * 0) + 5)
-#define GPIO_RA_6 ((32 * 0) + 6)
-#define GPIO_RA_7 ((32 * 0) + 7)
-
-#define GPIO_RB_0 ((32 * 1) + 0)
-#define GPIO_RB_1 ((32 * 1) + 1)
-#define GPIO_RB_2 ((32 * 1) + 2)
-#define GPIO_RB_3 ((32 * 1) + 3)
-#define GPIO_RB_4 ((32 * 1) + 4)
-#define GPIO_RB_5 ((32 * 1) + 5)
-#define GPIO_RB_6 ((32 * 1) + 6)
-#define GPIO_RB_7 ((32 * 1) + 7)
-#define GPIO_RB_8 ((32 * 1) + 8)
-#define GPIO_RB_9 ((32 * 1) + 9)
-#define GPIO_RB_10 ((32 * 1) + 10)
-#define GPIO_RB_11 ((32 * 1) + 11)
-#define GPIO_RB_12 ((32 * 1) + 12)
-#define GPIO_RB_13 ((32 * 1) + 13)
-#define GPIO_RB_14 ((32 * 1) + 14)
-#define GPIO_RB_15 ((32 * 1) + 15)
-#define GPIO_RB_16 ((32 * 1) + 16)
-#define GPIO_RB_17 ((32 * 1) + 17)
-#define GPIO_RB_18 ((32 * 1) + 18)
-#define GPIO_RB_19 ((32 * 1) + 19)
-
-#define GPIO_RC_0 ((32 * 2) + 0)
-#define GPIO_RC_1 ((32 * 2) + 1)
-#define GPIO_RC_2 ((32 * 2) + 2)
-#define GPIO_RC_3 ((32 * 2) + 3)
-#define GPIO_RC_4 ((32 * 2) + 4)
-#define GPIO_RC_5 ((32 * 2) + 5)
-#define GPIO_RC_6 ((32 * 2) + 6)
-#define GPIO_RC_7 ((32 * 2) + 7)
-#define GPIO_RC_8 ((32 * 2) + 8)
-#define GPIO_RC_9 ((32 * 2) + 9)
-#define GPIO_RC_10 ((32 * 2) + 10)
-#define GPIO_RC_11 ((32 * 2) + 11)
-#define GPIO_RC_12 ((32 * 2) + 12)
-#define GPIO_RC_13 ((32 * 2) + 13)
-#define GPIO_RC_14 ((32 * 2) + 14)
-#define GPIO_RC_15 ((32 * 2) + 15)
-#define GPIO_RC_16 ((32 * 2) + 16)
-#define GPIO_RC_17 ((32 * 2) + 17)
-#define GPIO_RC_18 ((32 * 2) + 18)
-#define GPIO_RC_19 ((32 * 2) + 19)
-#define GPIO_RC_20 ((32 * 2) + 20)
-#define GPIO_RC_21 ((32 * 2) + 21)
-#define GPIO_RC_22 ((32 * 2) + 22)
-#define GPIO_RC_23 ((32 * 2) + 23)
-#define GPIO_RC_24 ((32 * 2) + 24)
-#define GPIO_RC_25 ((32 * 2) + 25)
-#define GPIO_RC_26 ((32 * 2) + 26)
-#define GPIO_RC_27 ((32 * 2) + 27)
-#define GPIO_RC_28 ((32 * 2) + 28)
-#define GPIO_RC_29 ((32 * 2) + 29)
-#define GPIO_RC_30 ((32 * 2) + 30)
-#define GPIO_RC_31 ((32 * 2) + 31)
-
-#define GPIO_RD_0 ((32 * 3) + 0)
-#define GPIO_RD_1 ((32 * 3) + 1)
-#define GPIO_RD_2 ((32 * 3) + 2)
-#define GPIO_RD_3 ((32 * 3) + 3)
-#define GPIO_RD_4 ((32 * 3) + 4)
-#define GPIO_RD_5 ((32 * 3) + 5)
-#define GPIO_RD_6 ((32 * 3) + 6)
-#define GPIO_RD_7 ((32 * 3) + 7)
-#define GPIO_RD_8 ((32 * 3) + 8)
-#define GPIO_RD_9 ((32 * 3) + 9)
-#define GPIO_RD_10 ((32 * 3) + 10)
-#define GPIO_RD_11 ((32 * 3) + 11)
-
-#define GPIO_RE_0 ((32 * 4) + 0)
-#define GPIO_RE_1 ((32 * 4) + 1)
-#define GPIO_RE_2 ((32 * 4) + 2)
-#define GPIO_RE_3 ((32 * 4) + 3)
-#define GPIO_RE_4 ((32 * 4) + 4)
-#define GPIO_RE_5 ((32 * 4) + 5)
-#define GPIO_RE_6 ((32 * 4) + 6)
-#define GPIO_RE_7 ((32 * 4) + 7)
-
-#define GPIO_RF_0 ((32 * 5) + 0)
-#define GPIO_RF_1 ((32 * 5) + 1)
-#define GPIO_RF_2 ((32 * 5) + 2)
-#define GPIO_RF_3 ((32 * 5) + 3)
-#define GPIO_RF_4 ((32 * 5) + 4)
-#define GPIO_RF_5 ((32 * 5) + 5)
-#define GPIO_RF_6 ((32 * 5) + 6)
-#define GPIO_RF_7 ((32 * 5) + 7)
-#define GPIO_RF_8 ((32 * 5) + 8)
-#define GPIO_RF_9 ((32 * 5) + 9)
-#define GPIO_RF_10 ((32 * 5) + 10)
-#define GPIO_RF_11 ((32 * 5) + 11)
-#define GPIO_RF_12 ((32 * 5) + 12)
-#define GPIO_RF_13 ((32 * 5) + 13)
-#define GPIO_RF_14 ((32 * 5) + 14)
-#define GPIO_RF_15 ((32 * 5) + 15)
-
-#define GPIO_RG_0 ((32 * 6) + 0)
-#define GPIO_RG_1 ((32 * 6) + 1)
-#define GPIO_RG_2 ((32 * 6) + 2)
-#define GPIO_RG_3 ((32 * 6) + 3)
-#define GPIO_RG_4 ((32 * 6) + 4)
-#define GPIO_RG_5 ((32 * 6) + 5)
-#define GPIO_RG_6 ((32 * 6) + 6)
-#define GPIO_RG_7 ((32 * 6) + 7)
-#define GPIO_RG_8 ((32 * 6) + 8)
-#define GPIO_RG_9 ((32 * 6) + 9)
-#define GPIO_RG_10 ((32 * 6) + 10)
-#define GPIO_RG_11 ((32 * 6) + 11)
-#define GPIO_RG_12 ((32 * 6) + 12)
-#define GPIO_RG_13 ((32 * 6) + 13)
-#define GPIO_RG_14 ((32 * 6) + 14)
-#define GPIO_RG_15 ((32 * 6) + 15)
-#define GPIO_RG_16 ((32 * 6) + 16)
-#define GPIO_RG_17 ((32 * 6) + 17)
-#define GPIO_RG_18 ((32 * 6) + 18)
-#define GPIO_RG_19 ((32 * 6) + 19)
-#define GPIO_RG_20 ((32 * 6) + 20)
-#define GPIO_RG_21 ((32 * 6) + 21)
-#define GPIO_RG_22 ((32 * 6) + 22)
-#define GPIO_RG_23 ((32 * 6) + 23)
-#define GPIO_RG_24 ((32 * 6) + 24)
-#define GPIO_RG_25 ((32 * 6) + 25)
-#define GPIO_RG_26 ((32 * 6) + 26)
-#define GPIO_RG_27 ((32 * 6) + 27)
-#define GPIO_RG_28 ((32 * 6) + 28)
-#define GPIO_RG_29 ((32 * 6) + 29)
-#define GPIO_RG_30 ((32 * 6) + 30)
-#define GPIO_RG_31 ((32 * 6) + 31)
-
-#define GPIO_RH_0 ((32 * 7) + 0)
-#define GPIO_RH_1 ((32 * 7) + 1)
-#define GPIO_RH_2 ((32 * 7) + 2)
-#define GPIO_RH_3 ((32 * 7) + 3)
-#define GPIO_RH_4 ((32 * 7) + 4)
-#define GPIO_RH_5 ((32 * 7) + 5)
-#define GPIO_RH_6 ((32 * 7) + 6)
-#define GPIO_RH_7 ((32 * 7) + 7)
-#define GPIO_RH_8 ((32 * 7) + 8)
-#define GPIO_RH_9 ((32 * 7) + 9)
-
-#define GPIO_RI_0 ((32 * 8) + 0)
-#define GPIO_RI_1 ((32 * 8) + 1)
-#define GPIO_RI_2 ((32 * 8) + 2)
-#define GPIO_RI_3 ((32 * 8) + 3)
-#define GPIO_RI_4 ((32 * 8) + 4)
-#define GPIO_RI_5 ((32 * 8) + 5)
-#define GPIO_RI_6 ((32 * 8) + 6)
-#define GPIO_RI_7 ((32 * 8) + 7)
-#define GPIO_RI_8 ((32 * 8) + 8)
-#define GPIO_RI_9 ((32 * 8) + 9)
-#define GPIO_RI_10 ((32 * 8) + 10)
-#define GPIO_RI_11 ((32 * 8) + 11)
-#define GPIO_RI_12 ((32 * 8) + 12)
-#define GPIO_RI_13 ((32 * 8) + 13)
-#define GPIO_RI_14 ((32 * 8) + 14)
-#define GPIO_RI_15 ((32 * 8) + 15)
-
-/*
- * The following section defines extra GPIO available to some boards.
- * These GPIO are generally external to the processor (i.e. SPI/I2C
- * expander chips).
- *
- * Note that these defines show all possible GPIO available, however,
- * depending on the actual board configuration, some GPIO are not
- * available for use.
- */
-#ifdef CONFIG_IP7500MEDIA
-/*
- * U15
- */
-#define IP7500MEDIA_U15_BASE (32 * 10)
-#define IP7500MEDIA_IO0 (IP7500MEDIA_U15_BASE + 0)
-#define IP7500MEDIA_IO1 (IP7500MEDIA_U15_BASE + 1)
-#define IP7500MEDIA_IO2 (IP7500MEDIA_U15_BASE + 2)
-#define IP7500MEDIA_IO3 (IP7500MEDIA_U15_BASE + 3)
-#define IP7500MEDIA_IO4 (IP7500MEDIA_U15_BASE + 4)
-#define IP7500MEDIA_IO5 (IP7500MEDIA_U15_BASE + 5)
-#define IP7500MEDIA_IO6 (IP7500MEDIA_U15_BASE + 6)
-#define IP7500MEDIA_IO7 (IP7500MEDIA_U15_BASE + 7)
-
-/*
- * U16
- */
-#define IP7500MEDIA_U16_BASE (32 * 11)
-#define IP7500MEDIA_IO8 (IP7500MEDIA_U16_BASE + 0)
-#define IP7500MEDIA_IO9 (IP7500MEDIA_U16_BASE + 1)
-#define IP7500MEDIA_IO10 (IP7500MEDIA_U16_BASE + 2)
-#define IP7500MEDIA_IO11 (IP7500MEDIA_U16_BASE + 3)
-#define IP7500MEDIA_IO12 (IP7500MEDIA_U16_BASE + 4)
-#define IP7500MEDIA_IO13 (IP7500MEDIA_U16_BASE + 5)
-#define IP7500MEDIA_IO14 (IP7500MEDIA_U16_BASE + 6)
-#define IP7500MEDIA_IO15 (IP7500MEDIA_U16_BASE + 7)
-
-/*
- * U17
- */
-#define IP7500MEDIA_U17_BASE (32 * 12)
-#define IP7500MEDIA_IO16 (IP7500MEDIA_U17_BASE + 0)
-#define IP7500MEDIA_IO17 (IP7500MEDIA_U17_BASE + 1)
-#define IP7500MEDIA_IO18 (IP7500MEDIA_U17_BASE + 2)
-#define IP7500MEDIA_IO19 (IP7500MEDIA_U17_BASE + 3)
-#define IP7500MEDIA_IO20 (IP7500MEDIA_U17_BASE + 4)
-#define IP7500MEDIA_IO21 (IP7500MEDIA_U17_BASE + 5)
-#define IP7500MEDIA_IO22 (IP7500MEDIA_U17_BASE + 6)
-#define IP7500MEDIA_IO23 (IP7500MEDIA_U17_BASE + 7)
-
-/*
- * U18
- */
-#define IP7500MEDIA_U18_BASE (32 * 13)
-#define IP7500MEDIA_IO24 (IP7500MEDIA_U18_BASE + 0)
-#define IP7500MEDIA_IO25 (IP7500MEDIA_U18_BASE + 1)
-#define IP7500MEDIA_IO26 (IP7500MEDIA_U18_BASE + 2)
-#define IP7500MEDIA_IO27 (IP7500MEDIA_U18_BASE + 3)
-#define IP7500MEDIA_IO28 (IP7500MEDIA_U18_BASE + 4)
-#define IP7500MEDIA_IO29 (IP7500MEDIA_U18_BASE + 5)
-#define IP7500MEDIA_IO30 (IP7500MEDIA_U18_BASE + 6)
-#define IP7500MEDIA_IO31 (IP7500MEDIA_U18_BASE + 7)
-#endif
-
-#ifdef CONFIG_IP7145DPF
-/*
- * U48
- */
-#define IP7145DPF_U48_BASE (32 * 10)
-#define IP7145DPF_IO0 (IP7145DPF_U48_BASE + 0)
-#define IP7145DPF_IO1 (IP7145DPF_U48_BASE + 1)
-#define IP7145DPF_IO2 (IP7145DPF_U48_BASE + 2)
-#define IP7145DPF_IO3 (IP7145DPF_U48_BASE + 3)
-#define IP7145DPF_IO4 (IP7145DPF_U48_BASE + 4)
-#define IP7145DPF_IO5 (IP7145DPF_U48_BASE + 5)
-#define IP7145DPF_IO6 (IP7145DPF_U48_BASE + 6)
-#define IP7145DPF_IO7 (IP7145DPF_U48_BASE + 7)
-
-/*
- * U72
- */
-#define IP7145DPF_U72_BASE (32 * 11)
-#define IP7145DPF_IOB0 (IP7145DPF_U72_BASE + 0)
-#define IP7145DPF_IOB1 (IP7145DPF_U72_BASE + 1)
-#define IP7145DPF_IOB2 (IP7145DPF_U72_BASE + 2)
-#define IP7145DPF_IOB3 (IP7145DPF_U72_BASE + 3)
-#define IP7145DPF_IOB4 (IP7145DPF_U72_BASE + 4)
-#define IP7145DPF_IOB5 (IP7145DPF_U72_BASE + 5)
-#define IP7145DPF_IOB6 (IP7145DPF_U72_BASE + 6)
-#define IP7145DPF_IOB7 (IP7145DPF_U72_BASE + 7)
-#endif
-
-#include <asm-generic/gpio.h>
-
-/*
- * The following macros bypass gpiolib to generate direct references
- * to the port registers. These assume, minimally, that either
- * gpio_direction_input() or gpio_direction_output() have already been
- * called to setup the pin direction and to enable the pin function to
- * be gpio. These macros generate the hardware port address based on
- * the assumption that all ports are 32 bits wide (even though we know
- * they are not). This is so we can efficiently turn pin numbers into
- * port addresses without a lookup.
- *
- * These operations must be done in one instruction to prevent clobbering
- * other thread's accesses to the same port.
- */
-#define UBICOM32_GPIO_ENABLE(pin) \
- do { \
- asm volatile ("or.4 (%[port]), (%[port]), %[mask]\n\t" \
- : \
- : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_mask), \
- [mask] "d" (gpio_bit(pin)) \
- : "cc", "memory" \
- ); \
- } while (0);
-
-#define UBICOM32_GPIO_DISABLE(pin) \
- do { \
- asm volatile ("and.4 (%[port]), (%[port]), %[mask]\n\t" \
- : \
- : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_mask), \
- [mask] "d" (~gpio_bit(pin)) \
- : "cc", "memory" \
- ); \
- } while (0);
-
-#define UBICOM32_GPIO_SET_PIN_INPUT(pin) \
- do { \
- asm volatile ("and.4 (%[port]), (%[port]), %[mask]\n\t" \
- : \
- : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_ctl), \
- [mask] "d" (~gpio_bit(pin)) \
- : "cc", "memory" \
- ); \
- } while (0);
-
-#define UBICOM32_GPIO_SET_PIN_OUTPUT(pin) \
- do { \
- asm volatile ("or.4 (%[port]), (%[port]), %[mask]\n\t" \
- : \
- : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_ctl), \
- [mask] "d" (gpio_bit(pin)) \
- : "cc", "memory" \
- ); \
- } while (0);
-
-#define UBICOM32_GPIO_SET_PIN_TOGGLE(pin) \
- do { \
- asm volatile ("xor.4 (%[port]), (%[port]), %[mask]\n\t" \
- : \
- : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_out), \
- [mask] "d" (gpio_bit(pin)) \
- : "cc", "memory" \
- ); \
- } while (0);
-
-#define UBICOM32_GPIO_SET_PIN_HIGH(pin) \
- do { \
- asm volatile ("or.4 (%[port]), (%[port]), %[mask]\n\t" \
- : \
- : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_out), \
- [mask] "d" (gpio_bit(pin)) \
- : "cc", "memory" \
- ); \
- } while (0);
-
-#define UBICOM32_GPIO_SET_PIN_LOW(pin) \
- do { \
- asm volatile ("and.4 (%[port]), (%[port]), %[mask]\n\t" \
- : \
- : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_out), \
- [mask] "d" (~gpio_bit(pin)) \
- : "cc", "memory" \
- ); \
- } while (0);
-
-#define UBICOM32_GPIO_SET_PIN(pin, val) \
- if ( val ) { \
- UBICOM32_GPIO_SET_PIN_HIGH(pin); \
- } else { \
- UBICOM32_GPIO_SET_PIN_LOW(pin); \
- }
-
-#define UBICOM32_GPIO_GET_PIN(pin) \
- (0 != (UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_in \
- & gpio_bit(pin)))
-
-
-static inline int gpio_get_value(unsigned gpio)
-{
- if (gpio <= MAX_UBICOM_ONCHIP_GPIO)
- return UBICOM32_GPIO_GET_PIN(gpio);
- else
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- if (gpio <= MAX_UBICOM_ONCHIP_GPIO)
- {
- UBICOM32_GPIO_SET_PIN(gpio, value);
- }
- else
- {
- __gpio_set_value(gpio, value);
- }
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-#if defined(IP5000) || defined(IP5000_REV2)
- if ((gpio >= GPIO_RA_4) && (gpio <= GPIO_RA_6))
- return 25;
- else
- return -ENXIO;
-
-#elif defined(IP7000) || defined(IP7000_REV2)
- if ((gpio >= GPIO_RA_4) && (gpio <= GPIO_RA_6))
- return 44 + (gpio - GPIO_RA_4);
- else
- return -ENXIO;
-
-#else
- return -ENXIO;
-
-#endif
-}
-
-static inline int irq_to_gpio(unsigned gpio)
-{
- return -ENXIO;
-}
-
-extern struct ubicom32_io_port *ubi_gpio_get_port(unsigned gpio);
-
-extern int __init ubi_gpio_init(void);
-
-#endif /* _ASM_UBICOM32_GPIO_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/hardirq.h
- * Definition of ack_bad_irq() for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 1997, 98, 99, 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- * Copyright (C) 2001 MIPS Technologies, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_HARDIRQ_H
-#define _ASM_UBICOM32_HARDIRQ_H
-
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-/*
- * The hardirq mask has to be large enough to have space
- * for potentially all IRQ sources in the system nesting
- * on a single CPU. For Ubicom32, we have 64 IRQ sources.
- */
-#define HARDIRQ_BITS 6
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-typedef struct {
- unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-extern void ack_bad_irq(unsigned int irq);
-
-#endif /* _ASM_UBICOM32_HARDIRQ_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/hw_irq.h
- * Ubicom32 architecture APIC support.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_HW_IRQ_H
-#define _ASM_UBICOM32_HW_IRQ_H
-
-#endif /* _ASM_UBICOM32_HW_IRQ_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/io.h
- * I/O memory accessor functions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_IO_H
-#define _ASM_UBICOM32_IO_H
-
-#ifdef __KERNEL__
-#include <linux/string.h>
-#include <linux/compiler.h>
-
-static inline unsigned short _swapw(volatile unsigned short v)
-{
- return ((v << 8) | (v >> 8));
-}
-
-static inline unsigned int _swapl(volatile unsigned long v)
-{
- return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
-}
-
-#ifndef CONFIG_PCI
-#define readb(addr) \
- ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
-#define readw(addr) \
- ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
-#define readl(addr) \
- ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
-
-#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
-#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
-#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
-#else /*CONFIG_PCI */
-
-#define PCI_CPU_REG_BASE (0x00000000UL) /* taking lower 2GB space */
-#define PCI_DEV_REG_BASE (0x80000000UL)
-
-#if PCI_CPU_REG_BASE > PCI_DEV_REG_BASE
-#define IS_PCI_ADDRESS(x) (((unsigned int)(x)&(PCI_CPU_REG_BASE)) == 0)
-#else
-#define IS_PCI_ADDRESS(x) ((unsigned int)(x)&(PCI_DEV_REG_BASE))
-#endif
-
-extern unsigned int ubi32_pci_read_u32(const volatile void __iomem *addr);
-extern unsigned short ubi32_pci_read_u16(const volatile void __iomem *addr);
-extern unsigned char ubi32_pci_read_u8(const volatile void __iomem *addr);
-extern void ubi32_pci_write_u32(unsigned int val, const volatile void __iomem *addr);
-extern void ubi32_pci_write_u16(unsigned short val, const volatile void __iomem *addr);
-extern void ubi32_pci_write_u8(unsigned char val, const volatile void __iomem *addr);
-
-static inline unsigned char readb(const volatile void __iomem *addr)
-{
- if (IS_PCI_ADDRESS(addr))
- return ubi32_pci_read_u8(addr);
- else
- return (unsigned char)(*(volatile unsigned char *)addr);
-}
-static inline unsigned short readw(const volatile void __iomem *addr)
-{
- if (IS_PCI_ADDRESS(addr))
- return ubi32_pci_read_u16(addr);
- else
- return (unsigned short)(*(volatile unsigned short *)addr);
-}
-
-static inline unsigned int readl(const volatile void __iomem *addr)
-{
- if (IS_PCI_ADDRESS(addr))
- return ubi32_pci_read_u32(addr);
- else
- return (unsigned int)(*(volatile unsigned int *)addr);
-}
-
-static inline void writel(unsigned int val, volatile void __iomem *addr)
-{
- if (IS_PCI_ADDRESS(addr))
- ubi32_pci_write_u32(val, addr);
- else
- *(volatile unsigned int *)addr = val;
-}
-
-static inline void writew(unsigned short val, volatile void __iomem *addr)
-{
- if (IS_PCI_ADDRESS(addr))
- ubi32_pci_write_u16(val, addr);
- else
- *(volatile unsigned short *)addr = val;
-}
-
-static inline void writeb(unsigned char val, volatile void __iomem *addr)
-{
- if (IS_PCI_ADDRESS(addr))
- ubi32_pci_write_u8(val, addr);
- else
- *(volatile unsigned char *)addr = val;
-}
-#endif
-
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-static inline void io_outsb(unsigned int addr, const void *buf, int len)
-{
- volatile unsigned char *ap = (volatile unsigned char *) addr;
- unsigned char *bp = (unsigned char *) buf;
- while (len--)
- *ap = *bp++;
-}
-
-static inline void io_outsw(unsigned int addr, const void *buf, int len)
-{
- volatile unsigned short *ap = (volatile unsigned short *) addr;
- unsigned short *bp = (unsigned short *) buf;
- while (len--)
- *ap = _swapw(*bp++);
-}
-
-static inline void io_outsl(unsigned int addr, const void *buf, int len)
-{
- volatile unsigned int *ap = (volatile unsigned int *) addr;
- unsigned int *bp = (unsigned int *) buf;
- while (len--)
- *ap = _swapl(*bp++);
-}
-
-static inline void io_insb(unsigned int addr, void *buf, int len)
-{
- volatile unsigned char *ap = (volatile unsigned char *) addr;
- unsigned char *bp = (unsigned char *) buf;
- while (len--)
- *bp++ = *ap;
-}
-
-static inline void io_insw(unsigned int addr, void *buf, int len)
-{
- volatile unsigned short *ap = (volatile unsigned short *) addr;
- unsigned short *bp = (unsigned short *) buf;
- while (len--)
- *bp++ = _swapw(*ap);
-}
-
-static inline void io_insl(unsigned int addr, void *buf, int len)
-{
- volatile unsigned int *ap = (volatile unsigned int *) addr;
- unsigned int *bp = (unsigned int *) buf;
- while (len--)
- *bp++ = _swapl(*ap);
-}
-
-#define mmiowb()
-
-/*
- * make the short names macros so specific devices
- * can override them as required
- */
-#ifndef CONFIG_PCI
-#define memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
-#else
-extern void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned len);
-extern void memcpy_toio(volatile void __iomem *to, const void *from, unsigned len);
-extern void memset_io(volatile void __iomem *addr, int val, size_t count);
-#endif
-
-#define inb(addr) readb(addr)
-#define inw(addr) readw(addr)
-#define inl(addr) readl(addr)
-#define outb(x,addr) ((void) writeb(x,addr))
-#define outw(x,addr) ((void) writew(x,addr))
-#define outl(x,addr) ((void) writel(x,addr))
-
-#define inb_p(addr) inb(addr)
-#define inw_p(addr) inw(addr)
-#define inl_p(addr) inl(addr)
-#define outb_p(x,addr) outb(x,addr)
-#define outw_p(x,addr) outw(x,addr)
-#define outl_p(x,addr) outl(x,addr)
-
-#define outsb(a,b,l) io_outsb(a,b,l)
-#define outsw(a,b,l) io_outsw(a,b,l)
-#define outsl(a,b,l) io_outsl(a,b,l)
-
-#define insb(a,b,l) io_insb(a,b,l)
-#define insw(a,b,l) io_insw(a,b,l)
-#define insl(a,b,l) io_insl(a,b,l)
-
-#ifndef CONFIG_PCI
-#define ioread8_rep(a,d,c) insb(a,d,c)
-#define ioread16_rep(a,d,c) insw(a,d,c)
-#define ioread32_rep(a,d,c) insl(a,d,c)
-#define iowrite8_rep(a,s,c) outsb(a,s,c)
-#define iowrite16_rep(a,s,c) outsw(a,s,c)
-#define iowrite32_rep(a,s,c) outsl(a,s,c)
-#else
-extern void ioread8_rep(void __iomem *port, void *buf, unsigned long count);
-extern void ioread16_rep(void __iomem *port, void *buf, unsigned long count);
-extern void ioread32_rep(void __iomem *port, void *buf, unsigned long count);
-extern void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count);
-extern void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count);
-extern void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count);
-#endif
-
-
-#ifndef CONFIG_PCI
-#define ioread8(X) readb(X)
-#define ioread16(X) readw(X)
-#define ioread32(X) readl(X)
-#define iowrite8(val,X) writeb(val,X)
-#define iowrite16(val,X) writew(val,X)
-#define iowrite32(val,X) writel(val,X)
-#else /*CONFIG_PCI */
-extern unsigned char ioread8(void __iomem *addr);
-extern unsigned short ioread16(void __iomem *addr);
-extern unsigned int ioread32(void __iomem *addr);
-extern void iowrite8(unsigned char val, void __iomem *addr);
-extern void iowrite16(unsigned short val, void __iomem *addr);
-extern void iowrite32(unsigned int val, void __iomem *addr);
-#endif /* CONFIG_PCI */
-
-#define IO_SPACE_LIMIT 0xffff
-
-/* Values for nocacheflag and cmode */
-#define IOMAP_FULL_CACHING 0
-#define IOMAP_NOCACHE_SER 1
-#define IOMAP_NOCACHE_NONSER 2
-#define IOMAP_WRITETHROUGH 3
-
-extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
-extern void __iounmap(void *addr, unsigned long size);
-
-static inline void *ioremap(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-extern void iounmap(void *addr);
-
-#define ioport_map(port, nr) ((void __iomem*)(port))
-#define ioport_unmap(addr)
-
-
-/* Pages to physical address... */
-#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
-#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT)
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-#define phys_to_virt(vaddr) ((void *) (vaddr))
-#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_UBICOM32_IO_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ioctl.h
- * Generic ioctl.h for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_IOCTL_H
-#define _ASM_UBICOM32_IOCTL_H
-
-#include <asm-generic/ioctl.h>
-
-#endif /* _ASM_UBICOM32_IOCTL_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ioctls.h
- * Definitions of ioctls for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_IOCTLS_H
-#define _ASM_UBICOM32_IOCTLS_H
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T',0x2A, struct termios2)
-#define TCSETS2 _IOW('T',0x2B, struct termios2)
-#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define FIOQSIZE 0x545E
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-
-#endif /* _ASM_UBICOM32_IOCTLS_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ip5000-asm.h
- * Instruction macros for the IP5000.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#ifndef _ASM_UBICOM32_IP5000_ASM_H
-#define _ASM_UBICOM32_IP5000_ASM_H
-
-#if !defined(__LINKER__)
-
-#if defined(__ASSEMBLY__)
-.macro cycles quant
-.if (\quant) == 1
- nop
-.else
-.if (((\quant) + 3) / 8) > 0
-.rept (((\quant) + 3) / 8)
- jmpt.f .+4
-.endr
-.endif
-.if ((((\quant) + 3) % 8) / 4) > 0
- jmpt.t .+4
-.endif
-.endif
-.endm
-#else
-/*
- * Same macro as above just in C inline asm
- */
-asm (" \n\
-.macro cycles quant \n\
-.if (\\quant) == 1 \n\
- nop \n\
-.else \n\
-.if (((\\quant) + 3) / 8) > 0 \n\
-.rept (((\\quant) + 3) / 8) \n\
- jmpt.f .+4 \n\
-.endr \n\
-.endif \n\
-.if ((((\\quant) + 3) % 8) / 4) > 0 \n\
- jmpt.t .+4 \n\
-.endif \n\
-.endif \n\
-.endm \n\
-");
-#endif
-
-
-#if defined(__ASSEMBLY__)
-.macro pipe_flush cyc
- cycles 11 - (\cyc)
-.endm
-#else
-/*
- * Same macro as above just in C inline asm
- */
-asm (" \n\
-.macro pipe_flush cyc \n\
- cycles 11 - (\\cyc) \n\
-.endm \n\
-");
-
-#endif
-
-#if defined(__ASSEMBLY__)
-.macro setcsr_flush cyc
- cycles 5 - (\cyc)
-.endm
-#else
-/*
- * Same macro as above just in C inline asm
- */
-asm (" \n\
-.macro setcsr_flush cyc \n\
- cycles 5 - (\\cyc) \n\
-.endm \n\
-");
-#endif
-
-/*
- * Macros for prefetch (using miss-aligned memory write)
- */
-#if defined(__ASSEMBLY__)
-
-.macro pre_fetch_macro thread_num, Ascratch, Aaddress length
- bclr MT_TRAP_EN, MT_TRAP_EN, #(\thread_num)
- bset \Ascratch, \Aaddress, #0 ; force a miss-aligned address
- jmpt.t .+4 ; delay for both address setup and trap disable
- move.4 (\Ascratch), #0
- .if (\length > 32)
- move.4 32(\Ascratch), #0
- .endif
- .if (\length > 64)
- move.4 64(\Ascratch), #0
- .endif
- .if (\length > 96)
- move.4 96(\Ascratch), #0
- .endif
- .if (\length > 128)
- invalid_instruction ; maximum pre-fetch size is 4 cache lines
- .endif
- bset MT_TRAP_EN, MT_TRAP_EN, #(\thread_num)
-.endm
-
-#else
-/*
- * Same macro as above just in C inline asm
- */
-asm (" \n\
-.macro pre_fetch_macro thread_num, Ascratch, Aaddress length \n\
- bclr MT_TRAP_EN, MT_TRAP_EN, #(\thread_num) \n\
- bset \\Ascratch, \\Aaddress, #0 ; force a miss-aligned address \n\
- jmpt.t .+4 ; delay for both address setup and trap disable \n\
- move.4 (\\Ascratch), #0 \n\
- .if (\\length > 32) \n\
- move.4 32(\\Ascratch), #0 \n\
- .endif \n\
- .if (\\length > 64) \n\
- move.4 64(\\Ascratch), #0 \n\
- .endif \n\
- .if (\\length > 96) \n\
- move.4 96(\\Ascratch), #0 \n\
- .endif \n\
- .if (\\length > 128) \n\
- invalid_instruction ; maximum pre-fetch size is 4 cache lines \n\
- .endif \n\
- bset MT_TRAP_EN, MT_TRAP_EN, #(\\thread_num) \n\
-.endm \n\
-");
-#endif
-
-#endif /* !defined(__LINKER__) */
-#endif /* defined _ASM_UBICOM32_IP5000_ASM_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ip5000.h
- * Specific details for the Ubicom IP5000 processor.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#ifndef _ASM_UBICOM32_IP5000_H
-#define _ASM_UBICOM32_IP5000_H
-
-#include <asm/memory_map.h>
-
-/*
- * Inline assembly define
- */
-#define S(arg) #arg
-#define D(arg) S(arg)
-
-/*
- * Assembler include file
- */
-#include <asm/ip5000-asm.h>
-
-/*
- * Timing
- */
-#define JMPT_PENALTY 3
-#define JMPF_PENALTY 7
-#define RET_PENALTY 7
-
-/*
- * Threads
- */
-#if defined(IP5000) || defined(IP5000_REV2)
-#define THREAD_COUNT 10
-#elif defined(IP7000) || defined(IP7000_REV2)
-#define THREAD_COUNT 12
-#else
-#error "Unknown IP5K silicon"
-#endif
-
-/*
- * Arch
- */
-#if defined(IP5000) || defined(IP5000_REV2)
-#define UBICOM32_ARCH_VERSION 3
-#elif defined(IP7000) || defined(IP7000_REV2)
-#define UBICOM32_ARCH_VERSION 4
-#else
-#error "Unknown IP5K silicon"
-#endif
-
-
-/*
- * Registers
- */
-#define ROSR_INT (1 << 0)
-
-/* Interrupts */
-#define INT_CHIP(reg, bit) (((reg) << 5) | (bit))
-#define INT_REG(interrupt) (((interrupt) >> 5) * 4)
-#define INT_SET(interrupt) 0x0114 + INT_REG(interrupt)
-#define INT_CLR(interrupt) 0x0124 + INT_REG(interrupt)
-#define INT_STAT(interrupt) 0x0104 + INT_REG(interrupt)
-#define INT_MASK(interrupt) 0x00C0 + INT_REG(interrupt)
-#define INT_BIT(interrupt) ((interrupt) & 0x1F)
-#define INT_BIT_MASK(interrupt) (1 << INT_BIT(interrupt))
-
-/*
- * The LOCK_INT and THREAD_INT are used to wake up corresponding thread. They are sharing
- * the same set of SW interrupt resource.
- *
- * LOCK_INT(n): One SW INT per NRT thread that can participate lock operation.
- * The threads that can participate lock are application threads and DSR thread.
- * (Lock locks - numbers are hard-coded in lock.h)
- * THREAD_INT(n): One SW INT per HRT thread for wake up trigger.
- */
-#define LOCK_INT(thread) INT_CHIP(0, (thread))
-#define THREAD_INT(thread) INT_CHIP(0, (thread))
-
-/*
- * The SYSTEM_INT and DSR_INT are sharing the same set of SW interrupt resource.
- *
- * SYSTEM_INT(n): One SW INT per NRT threads (application threads) as system queue interrupt,
- * and for DSR as self-trigger interrupt.
- * (The application threads include at least thread 0)
- * DSR_INT(n): One SW INT per HRT thread to request DSR service.
- */
-#define SYSTEM_INT(thread) INT_CHIP(0, THREAD_COUNT + (thread))
-#define DSR_INT(thread) INT_CHIP(0, THREAD_COUNT + (thread))
-
-/* GLOBAL_CTRL */
-#define GLOBAL_CTRL_TRAP_RST_EN (1 << 9)
-#define GLOBAL_CTRL_AERROR_RST_EN (1 << 8)
-#define GLOBAL_CTRL_MT_MIN_DELAY(x) ((x) << 3)
-#define GLOBAL_CTRL_HRT_BANK_SELECT (1 << 2)
-#define GLOBAL_CTRL_INT_EN (1 << 0)
-
-/*
- * HRT Tables
- */
-#define HRT_TABLE0_BASE 0x0800
-#define HRT_TABLE1_BASE 0x0900
-#define HRT_TABLE_SIZE 64
-
-/*
- * Break Point Trap Register
- */
-#define ASYNCERROR_INT INT_CHIP(0, 31)
-#define BREAKPOINT_INT INT_CHIP(1, 31)
-
-/*
- * Port interrupts
- * The non-existing FIFO INTs are mapped to INT2 for the ports.
- */
-#define IO_PORT_PTR_TO_NUM(port) (((port) & 0x0000ffff) >> 12)
-#define RX_FIFO_INT(port) \
- ((IO_PORT_PTR_TO_NUM(port) == 0) ? INT_CHIP(0, 25) : \
- ((IO_PORT_PTR_TO_NUM(port) == 1) ? INT_CHIP(0, 26) : \
- ((IO_PORT_PTR_TO_NUM(port) == 2) ? INT_CHIP(0, 29) : \
- ((IO_PORT_PTR_TO_NUM(port) == 3) ? INT_CHIP(1, 24) : \
- ((IO_PORT_PTR_TO_NUM(port) == 4) ? INT_CHIP(1, 27) : \
- ((IO_PORT_PTR_TO_NUM(port) == 5) ? INT_CHIP(1, 16) : \
- ((IO_PORT_PTR_TO_NUM(port) == 6) ? INT_CHIP(1, 19) : \
- ((IO_PORT_PTR_TO_NUM(port) == 7) ? INT_CHIP(1, 20) : \
- ((IO_PORT_PTR_TO_NUM(port) == 8) ? INT_CHIP(1, 21) : \
- INT_CHIP(1, 15))))))))))
-#define TX_FIFO_INT(port) \
- ((IO_PORT_PTR_TO_NUM(port) == 0) ? INT_CHIP(0, 24) : \
- ((IO_PORT_PTR_TO_NUM(port) == 1) ? INT_CHIP(0, 27) : \
- ((IO_PORT_PTR_TO_NUM(port) == 2) ? INT_CHIP(0, 29) : \
- ((IO_PORT_PTR_TO_NUM(port) == 3) ? INT_CHIP(1, 25) : \
- ((IO_PORT_PTR_TO_NUM(port) == 4) ? INT_CHIP(1, 28) : \
- ((IO_PORT_PTR_TO_NUM(port) == 5) ? INT_CHIP(1, 17) : \
- ((IO_PORT_PTR_TO_NUM(port) == 6) ? INT_CHIP(1, 19) : \
- ((IO_PORT_PTR_TO_NUM(port) == 7) ? INT_CHIP(1, 20) : \
- ((IO_PORT_PTR_TO_NUM(port) == 8) ? INT_CHIP(1, 22) : \
- INT_CHIP(1, 15))))))))))
-#define PORT_OTHER_INT(port) \
- ((IO_PORT_PTR_TO_NUM(port) == 0) ? INT_CHIP(0, 25) : \
- ((IO_PORT_PTR_TO_NUM(port) == 1) ? INT_CHIP(0, 28) : \
- ((IO_PORT_PTR_TO_NUM(port) == 2) ? INT_CHIP(0, 29) : \
- ((IO_PORT_PTR_TO_NUM(port) == 3) ? INT_CHIP(1, 26) : \
- ((IO_PORT_PTR_TO_NUM(port) == 4) ? INT_CHIP(1, 29) : \
- ((IO_PORT_PTR_TO_NUM(port) == 5) ? INT_CHIP(1, 18) : \
- ((IO_PORT_PTR_TO_NUM(port) == 6) ? INT_CHIP(1, 19) : \
- ((IO_PORT_PTR_TO_NUM(port) == 7) ? INT_CHIP(1, 20) : \
- ((IO_PORT_PTR_TO_NUM(port) == 8) ? INT_CHIP(1, 23) : \
- INT_CHIP(1, 15))))))))))
-
-/*
- * On Chip Peripherals Base.
- */
-#define OCP_BASE 0x01000000
-#define OCP_GENERAL 0x000
-#define OCP_TIMERS 0x100
-#define OCP_TRNG 0x200 /* True Random Number Generator Control Reigsters */
-#define OCP_DEBUG 0x300
-#define OCP_SECURITY 0x400
-#define OCP_ICCR 0x500 /* I-Cache Control Registers */
-#define OCP_DCCR 0x600 /* D-Cache Control Registers */
-#define OCP_OCMC 0x700 /* On Chip Memory Control Registers */
-#define OCP_STATISTICS 0x800 /* Statistics Counters */
-#define OCP_MTEST 0x900 /* Memory Test Registers */
-#define OCP_MCFG 0xa00 /* Memory Configuration Registers -- IP7000 only */
-#define OCP_DEBUG_INST 0x000 /* Up to 16M */
-
-/*
- * General Configuration Registers (PLL)
- */
-#define GENERAL_CFG_BASE (OCP_BASE + OCP_GENERAL)
-#define GEN_CLK_CORE_CFG 0x00
-#define GEN_CLK_IO_CFG 0x04
-#define GEN_CLK_DDR_CFG 0x08
-#define GEN_CLK_DDRDS_CFG 0x0c
-#define GEN_CLK_SLIP_CLR 0x10
-#define GEN_CLK_SLIP_START 0x14
-#define GEN_CLK_SERDES_SEL 0x18 /* IP7000 only */
-#define GEN_CLK_DDR_CFG2 0x1c /* IP7000 only */
-#define GEN_DDR_CAL_CTRL 0x30 /* IP5000 only */
-#define GEN_DDR_CAL_STAT 0x34 /* IP5000 only */
-#define GEN_USB_DFT_CTRL 0x38 /* IP5000 only */
-#define GEN_USB_DFT_STAT 0x3c /* IP5000 only */
-#define GEN_USB_PHY_CFG 0x40 /* IP7000 only */
-#define GEN_USB_PHY_TEST 0x44 /* IP7000 only */
-#define GEN_USB_PHY_STAT 0x48 /* IP7000 only */
-#define GEN_SW_RESET 0x80
-#define GEN_RESET_REASON 0x84
-#define GEN_BOND_CFG 0x88
-#define GEN_IO_PU_CFG 0x8c
-#define GEN_MEM_RM_CFG 0x90
-#define GEN_IO_CONFIG 0x94
-
-#define GEN_CLK_PLL_SECURITY_BIT_NO 31
-#define GEN_CLK_PLL_SECURITY (1 << GEN_CLK_PLL_SECURITY_BIT_NO)
-#define GEN_CLK_PLL_ENSAT (1 << 30)
-#define GEN_CLK_PLL_FASTEN (1 << 29)
-#define GEN_CLK_PLL_NR(v) (((v) - 1) << 23)
-#define GEN_CLK_PLL_NF(v) (((v) - 1) << 11)
-#define GEN_CLK_PLL_OD(v) (((v) - 1) << 8)
-#define GEN_CLK_PLL_RESET (1 << 7)
-#define GEN_CLK_PLL_BYPASS (1 << 6)
-#define GEN_CLK_PLL_POWERDOWN (1 << 5)
-#define GEN_CLK_PLL_SELECT (1 << 4)
-
-#define GEN_GET_CLK_PLL_NR(v) ((((v) >> 23) & 0x003f) + 1)
-#define GEN_GET_CLK_PLL_NF(v) ((((v) >> 11) & 0x0fff) + 1)
-#define GEN_GET_CLK_PLL_OD(v) ((((v) >> 8) & 0x7) + 1)
-
-
-#define RESET_FLAG_DST_MEM_ERROR (1 << 18)
-#define RESET_FLAG_SRC1_MEM_ERROR (1 << 17)
-#define RESET_FLAG_WRITE_ADDR (1 << 16)
-#define RESET_FLAG_DST_SYNC_ERROR (1 << 15)
-#define RESET_FLAG_SRC1_SYNC_ERROR (1 << 14)
-#define RESET_FLAG_DST_ALGN_ERROR (1 << 13)
-#define RESET_FLAG_SRC1_ALGN_ERROR (1 << 12)
-#define RESET_FLAG_DST_ADDR_ERROR (1 << 11)
-#define RESET_FLAG_SRC1_ADDR_ERROR (1 << 10)
-#define RESET_FLAG_ILLEGAL_INST (1 << 9)
-#define RESET_FLAG_INST_SYNC_ERROR (1 << 8)
-#define RESET_FLAG_INST_ADDR_ERROR (1 << 7)
-#define RESET_FLAG_DATA_PORT_ERROR (1 << 6)
-#define RESET_FLAG_INST_PORT_ERROR (1 << 5)
-#define RESET_FLAG_SW_RESET (1 << 4)
-#define RESET_FLAG_DEBUG (1 << 3)
-#define RESET_FLAG_WATCHDOG (1 << 2)
-#define RESET_FLAG_POWER_ON (1 << 1)
-#define RESET_FLAG_EXTERNAL (1 << 0)
-
-/*
- * Timer block
- */
-#define TIMER_BASE (OCP_BASE + OCP_TIMERS)
-#define TIMER_MPTVAL 0x00
-#define TIMER_RTCOM 0x04
-#define TIMER_TKEY 0x08
-#define TIMER_WDCOM 0x0c
-#define TIMER_WDCFG 0x10
-#define TIMER_SYSVAL 0x14
-#define TIMER_SYSCOM(tmr) (0x18 + (tmr) * 4)
-#define TIMER_TRN_CFG 0x100
-#define TIMER_TRN 0x104
-
-#define TIMER_COUNT 10
-#define TIMER_INT(tmr) INT_CHIP(1, (tmr))
-#define TIMER_TKEYVAL 0xa1b2c3d4
-#define TIMER_WATCHDOG_DISABLE 0x4d3c2b1a
-#define TIMER_TRN_CFG_ENABLE_OSC 0x00000007
-
-#ifndef __ASSEMBLY__
-/*
- * ubicom32_io_timer
- */
-struct ubicom32_io_timer {
- volatile u32_t mptval;
- volatile u32_t rtcom;
- volatile u32_t tkey;
- volatile u32_t wdcom;
- volatile u32_t wdcfg;
- volatile u32_t sysval;
- volatile u32_t syscom[TIMER_COUNT];
- volatile u32_t reserved[64 - 6 - TIMER_COUNT]; // skip all the way to OCP-TRNG section
- volatile u32_t rsgcfg;
- volatile u32_t trn;
-};
-
-#define UBICOM32_IO_TIMER ((struct ubicom32_io_timer *)TIMER_BASE)
-#endif
-
-#define UBICOM32_VECTOR_TO_TIMER_INDEX(vector) (vector - TIMER_INT(0))
-
-/*
- * OCP-Debug Module (Mailbox)
- */
-#define ISD_MAILBOX_BASE (OCP_BASE + OCP_DEBUG)
-#define ISD_MAILBOX_IN 0x00
-#define ISD_MAILBOX_OUT 0x04
-#define ISD_MAILBOX_STATUS 0x08
-
-#define ISD_MAILBOX_INT INT_CHIP(1, 30)
-
-#define ISD_MAILBOX_STATUS_IN_FULL (1 << 31)
-#define ISD_MAILBOX_STATUS_IN_EMPTY (1 << 30)
-#define ISD_MAILBOX_STATUS_OUT_FULL (1 << 29)
-#define ISD_MAILBOX_STATUS_OUT_EMPTY (1 << 28)
-
-/*
- * OCP-Security
- */
-#define SECURITY_BASE (OCP_BASE + OCP_SECURITY)
-#define SECURITY_BASE_EFFECTIVE_ADDRESS (SECURITY_BASE >> 7) // To load the base address in a single instruction
-#define SECURITY_CTRL 0x00
-#define SECURITY_CTRL_BYTE_OFFSET(x) ((x) << 16)
-#define SECURITY_CTRL_KEY_SIZE(x) ((x) << 8)
-#define SECURITY_CTRL_HASH_ALG_NONE (0 << 4)
-#define SECURITY_CTRL_HASH_ALG_MD5 (1 << 4)
-#define SECURITY_CTRL_HASH_ALG_SHA1 (2 << 4)
-#define SECURITY_CTRL_CBC (1 << 3)
-#define SECURITY_CTRL_CIPHER_ALG_AES (0 << 1)
-#define SECURITY_CTRL_CIPHER_ALG_NONE (1 << 1)
-#define SECURITY_CTRL_CIPHER_ALG_DES (2 << 1)
-#define SECURITY_CTRL_CIPHER_ALG_3DES (3 << 1)
-#define SECURITY_CTRL_ENCIPHER (1 << 0)
-#define SECURITY_CTRL_DECIPHER (0 << 0)
-#define SECURITY_STAT 0x04
-#define SECURITY_STAT_BUSY (1 << 0)
-#define SECURITY_KEY_VALUE(x) (0x10 + (x) * 4)
-#define SECURITY_KEY_IN(x) (0x30 + (x) * 4)
-#define SECURITY_KEY_OUT(x) (0x50 + (x) * 4)
-#define SECURITY_KEY_HASH(x) (0x70 + (x) * 4)
-
-/*
- * OCP-ICCR
- */
-#define ICCR_BASE (OCP_BASE + OCP_ICCR)
-#define ICACHE_TOTAL_SIZE 16384 /* in bytes */
-
-/*
- * OCP-DCCR
- */
-#define DCCR_BASE (OCP_BASE + OCP_DCCR)
-#if defined(IP5000) || defined(IP5000_REV2)
-#define DCACHE_TOTAL_SIZE 8192 /* in bytes */
-#elif defined(IP7000) || defined(IP7000_REV2)
-#define DCACHE_TOTAL_SIZE 16384 /* in bytes */
-#endif
-
-#if defined(IP5000) || defined(IP5000_REV2) || defined(IP7000) || defined(IP7000_REV2)
-#define DCACHE_WRITE_QUEUE_LENGTH 6
-#else
-#error "Unknown IP5K silicon"
-#endif
-
-#define CACHE_LINE_SIZE 32 /* in bytes */
-
-#define CCR_ADDR 0x00
-#define CCR_RDD 0x04
-#define CCR_WRD 0x08
-#define CCR_STAT 0x0c
-#define CCR_CTRL 0x10
-
-#define CCR_STAT_MCBE 0
-#define CCR_STAT_WIDEL 1 /* D-cache only */
-
-#define CCR_CTRL_DONE 0
-#define CCR_CTRL_RESET 2
-#define CCR_CTRL_VALID 3
-#define CCR_CTRL_RD_DATA (1 << 4)
-#define CCR_CTRL_RD_TAG (2 << 4)
-#define CCR_CTRL_WR_DATA (3 << 4)
-#define CCR_CTRL_WR_TAG (4 << 4)
-#define CCR_CTRL_INV_INDEX (5 << 4)
-#define CCR_CTRL_INV_ADDR (6 << 4)
-#define CCR_CTRL_FLUSH_INDEX (7 << 4) /* D-cache only */
-#define CCR_CTRL_FLUSH_INV_INDEX (8 << 4) /* D-cache only */
-#define CCR_CTRL_FLUSH_ADDR (9 << 4) /* D-cache only */
-#define CCR_CTRL_FLUSH_INV_ADDR (10 << 4) /* D-cache only */
-
-/*
- * OCP-OCMC
- */
-#define OCMC_BASE (OCP_BASE + OCP_OCMC)
-#define OCMC_BANK_MASK 0x00
-#define OCMC_BIST_CNTL 0x04 /* IP5000 only */
-#define OCMC_BIST_STAT 0x08 /* IP5000 only */
-
-#define OCMC_BANK_PROG(n) ((1<<(n))-1)
-
-#define OCMC_BIST_WRCK (1 << 7)
-#define OCMC_BIST_RESET (1 << 5)
-#define OCMC_BIST_SMART (1 << 4)
-#define OCMC_BIST_RUN (1 << 3)
-#define OCMC_BIST_REPAIR (1 << 2)
-
-#define OCMC_BIST_READY (1 << 3)
-#define OCMC_BIST_FAIL (1 << 2)
-
-/*
- * OCP-STATISTICS
- */
-#define STATISTICS_BASE (OCP_BASE + OCP_STATISTICS)
-#define STAT_COUNTER_CTRL(n) ((n)*8)
-#define STAT_COUNTER(n) ((n)*8 + 4)
-
-#define STAT_EVENT_MP_INST 0
-#define STAT_EVENT_OCM_ACCESS 4
-#define STAT_EVENT_OCM_REQ 5
-#define STAT_EVENT_IC_REQ_INVAL 13
-#define STAT_EVENT_IC_MISS_INVAL 14
-#define STAT_EVENT_IC_REQ_INVAL_NACK 15
-#define STAT_EVENT_IC_REQ_VAL 16
-#define STAT_EVENT_IC_MISS_VAL 17
-#define STAT_EVENT_IC_REQ_VAL_NACK 18
-#define STAT_EVENT_IC_MISS_Q 19
-#define STAT_EVENT_DC_RD_REQ 20
-#define STAT_EVENT_DC_RD_MISS 21
-#define STAT_EVENT_DC_WR_REQ 22
-#define STAT_EVENT_DC_WR_MISS 23
-#define STAT_EVENT_DC_MISS_Q 24
-#define STAT_EVENT_DC_WB_FULL 25
-#define STAT_EVENT_DC_REQ_NACK 26
-#define STAT_EVENT_DC_CORE_REQ 27
-#define STAT_EVENT_DC_MISS 28
-#define STAT_EVENT_DC_EVICT 29
-#define STAT_EVENT_TRUE 30
-#define STAT_EVENT_FALSE 31
-
-/*
- * OCP_MTEST
- */
-#define MTEST_BASE (OCP_BASE + OCP_MTEST)
-#define MTEST_ADDR 0x00
-#define MTEST_WR 0x04
-#define MTEST_RD 0x08
-#define MTEST_CTRL 0x0c
-
-/*
- * OCP_MCFG (IP7000 only)
- */
-#define MCFG_BASE (OCP_BASE + OCP_MCFG)
-#define MCFG_CTRL 0x00
-#define MCFG_WCFG 0x04
-#define MCFG_RCFG 0x08
-
-/*
- * Port registers
- */
-#define IO_BASE 0x02000000
-#define RA (IO_BASE + 0x00000000)
-#define RB (IO_BASE + 0x00001000)
-#define RC (IO_BASE + 0x00002000)
-#define RD (IO_BASE + 0x00003000)
-#define RE (IO_BASE + 0x00004000)
-#define RF (IO_BASE + 0x00005000)
-#define RG (IO_BASE + 0x00006000)
-#define RH (IO_BASE + 0x00007000)
-#define RI (IO_BASE + 0x00008000)
-#define RJ (IO_BASE + 0x00009000)
-#define RLATCH (IO_BASE + 0x00ff0000) // For latched output only
-#define IO_PORT_BR_OFFSET 0x00000800
-
-/*
- * General I/O Register Map (per port)
- */
-#define IO_FUNC 0x00
-#define IO_GPIO_CTL 0x04
-#define IO_GPIO_OUT 0x08
-#define IO_GPIO_IN 0x0C
-#define IO_INT_STATUS 0x10
-#define IO_INT_MASK 0x14
-#define IO_INT_SET 0x18
-#define IO_INT_CLR 0x1C
-#define IO_TX_FIFO 0x20
-#define IO_TX_FIFO_HI 0x24
-#define IO_RX_FIFO 0x28
-#define IO_RX_FIFO_HI 0x2c
-#define IO_CTL0 0x30
-#define IO_CTL1 0x34
-#define IO_CTL2 0x38
-#define IO_STATUS0 0x3c
-#define IO_STATUS1 0x40
-#define IO_STATUS2 0x44
-#define IO_FIFO_WATER 0x48
-#define IO_FIFO_LEVEL 0x4c
-#define IO_GPIO_MASK 0x50
-
-#define IO_FUNC_FUNCTION_RESET(func) ((1 << ((func) - 1)) << 4) /* Function 0 doesn't need reset */
-#define IO_FUNC_RX_FIFO (1 << 3)
-#define IO_FUNC_SELECT(func) ((func) << 0)
-
-/*
- * External interrupt pins.
- */
-#define EXT_INT_IO_BIT(pin) ((pin) + 5) // Interrupt pin number -> I/O INT bit
-#define EXT_INT_RISING_EDGE(pin) (0x2 << (2*(pin) + 7))
-#define EXT_INT_FALLING_EDGE(pin) (0x1 << (2*(pin) + 7))
-
-/*
- * Flash
- */
-#define IO_XFL_BASE RA
-
-#define IO_XFL_INT_START (1 << 16)
-#define IO_XFL_INT_ERR (1 << 8)
-#define IO_XFL_INT_DONE (1 << 0)
-
-#define IO_XFL_CTL0_MASK (0xffe07fff)
-#define IO_XFL_CTL0_RD_CMD(cmd) (((cmd) & 0xff) << 24)
-#define IO_XFL_CTL0_RD_DUMMY(n) (((n) & 0x7) << 21)
-#define IO_XFL_CTL0_CLK_WIDTH(core_cycles) ((((core_cycles) + 1) & 0x7e) << 8) /* must be even number */
-#define IO_XFL_CTL0_CE_WAIT(spi_cycles) (((spi_cycles) & 0x3f) << 2)
-#define IO_XFL_CTL0_MCB_LOCK (1 << 1)
-#define IO_XFL_CTL0_ENABLE (1 << 0)
-#define IO_XFL_CTL0_FAST_VALUE(div, wait) (IO_XFL_CTL0_RD_CMD(0xb) | IO_XFL_CTL0_RD_DUMMY(1) | IO_XFL_CTL0_CLK_WIDTH(div) | IO_XFL_CTL0_CE_WAIT(wait) | IO_XFL_CTL0_ENABLE)
-#define IO_XFL_CTL0_VALUE(div, wait) (IO_XFL_CTL0_RD_CMD(3) | IO_XFL_CTL0_CLK_WIDTH(div) | IO_XFL_CTL0_CE_WAIT(wait) | IO_XFL_CTL0_ENABLE)
-
-#define IO_XFL_CTL1_MASK (0xc0003fff)
-#define IO_XFL_CTL1_FC_INST(inst) (((inst) & 0x3) << 30)
-#define IO_XFL_CTL1_FC_DATA(n) (((n) & 0x3ff) << 4)
-#define IO_XFL_CTL1_FC_DUMMY(n) (((n) & 0x7) << 1)
-#define IO_XFL_CTL1_FC_ADDR (1 << 0)
-
-#define IO_XFL_CTL2_FC_CMD(cmd) (((cmd) & 0xff) << 24)
-#define IO_XFL_CTL2_FC_ADDR(addr) ((addr) & 0x00ffffff) /* Only up to 24 bits */
-
-#define IO_XFL_STATUS0_MCB_ACTIVE (1 << 0)
-#define IO_XFL_STATUS0_IOPCS_ACTIVE (1 << 1)
-
-/*
- * SDRAM
- */
-#define IO_SDRAM_DATA_BASE RG
-#define IO_SDRAM_CNTL_BASE RH
-
-#define IO_SDRAM_CTRL0_EN_REF (1 << 0)
-
-/*
- * Port function code (common fucntion codes for all I/O ports)
- */
-#define IO_PORTX_FUNC_GPIO 0x00
-#define IO_PORTX_FUNC_XFL 0x01
-#define IO_PORTX_FUNC_PCI 0x01
-#define IO_PORTX_FUNC_SERDES 0x01
-#define IO_PORTX_FUNC_GMII 0x01
-#define IO_PORTX_FUNC_DDR 0x01
-#define IO_PORTX_FUNC_PCIX 0x01
-#define IO_PORTX_FUNC_USB2_0 0x01
-#define IO_PORTX_FUNC_GPIO_INT_CLK 0x02
-#define IO_PORTX_FUNC_PLIO 0x02
-#define IO_PORTX_FUNC_GPIO_INT 0x03
-#define IO_PORTX_FUNC_MII 0x03
-
-/*
- * Port 0
- */
-#define IO_PORT0_FUNC_GPIO IO_PORTX_FUNC_GPIO
-#define IO_PORT0_FUNC_XFL_INT_CLK IO_PORTX_FUNC_XFL // Default mode after reset
-#define IO_PORT0_FUNC_GPIO_INT_CLK IO_PORTX_FUNC_GPIO_INT_CLK
-#define IO_PORT0_FUNC_GPIO_INT IO_PORTX_FUNC_GPIO_INT
-
-/*
- * Port 1
- */
-#define IO_PORT1_FUNC_GPIO IO_PORTX_FUNC_GPIO
-#define IO_PORT1_FUNC_PCI IO_PORTX_FUNC_PCI // PCI control
-#define IO_PORT1_FUNC_MII IO_PORTX_FUNC_MII // port 4 MII extension
-
-/*
- * Port 2
- */
-#define IO_PORT2_FUNC_GPIO IO_PORTX_FUNC_GPIO
-#define IO_PORT2_FUNC_PCI IO_PORTX_FUNC_PCI // PCI data I/O
-#define IO_PORT2_FUNC_PLIO IO_PORTX_FUNC_PLIO // Extended LM
-
-/*
- * Port 3
- */
-#define IO_PORT3_FUNC_GPIO IO_PORTX_FUNC_GPIO
-#define IO_PORT3_FUNC_SERDES IO_PORTX_FUNC_SERDES
-#define IO_PORT3_FUNC_PLIO IO_PORTX_FUNC_PLIO
-
-/*
- * Port 4
- */
-#define IO_PORT4_FUNC_GPIO IO_PORTX_FUNC_GPIO
-#define IO_PORT4_FUNC_SERDES IO_PORTX_FUNC_SERDES
-#define IO_PORT4_FUNC_PLIO IO_PORTX_FUNC_PLIO // Extended LM
-#define IO_PORT4_FUNC_MII IO_PORTX_FUNC_MII
-
-/*
- * Port 5
- */
-#define IO_PORT5_FUNC_GPIO IO_PORTX_FUNC_GPIO
-#define IO_PORT5_FUNC_GMII IO_PORTX_FUNC_GMII
-
-/*
- * Port 6
- */
-#define IO_PORT6_FUNC_GPIO IO_PORTX_FUNC_GPIO
-#define IO_PORT6_FUNC_DDR IO_PORTX_FUNC_DDR
-
-/*
- * Port 7
- */
-#define IO_PORT7_FUNC_GPIO IO_PORTX_FUNC_GPIO
-#define IO_PORT7_FUNC_DDR IO_PORTX_FUNC_DDR
-
-/*
- * Port 8
- */
-#define IO_PORT8_FUNC_GPIO IO_PORTX_FUNC_GPIO
-#define IO_PORT8_FUNC_PCIX IO_PORTX_FUNC_PCIX
-#define IO_PORT8_FUNC_PLIO IO_PORTX_FUNC_PLIO // Extended LM
-#define IO_PORT8_FUNC_MII IO_PORTX_FUNC_MII // port 4 MII extension
-
-/*
- * Port 9
- */
-#define IO_PORT9_FUNC_USB2_0 IO_PORTX_FUNC_USB2_0
-
-/*
- * FIFO
- */
-#define IO_PORTX_INT_FIFO_TX_RESET (1 << 31)
-#define IO_PORTX_INT_FIFO_RX_RESET (1 << 30)
-#define IO_PORTX_INT_FIFO_TX_UF (1 << 15)
-#define IO_PORTX_INT_FIFO_TX_WM (1 << 14)
-#define IO_PORTX_INT_FIFO_RX_OF (1 << 13)
-#define IO_PORTX_INT_FIFO_RX_WM (1 << 12)
-
-#define IO_PORTX_FUNC_FIFO_TX_WM(n) ((n) << 16)
-#define IO_PORTX_FUNC_FIFO_RX_WM(n) ((n) << 0)
-
-/*
- * MII
- */
-#define IO_PORTX_INT_MII_TX_ERR_SEND (1 << 18)
-#define IO_PORTX_INT_MII_TX_HALT (1 << 17)
-#define IO_PORTX_INT_MII_TX_START (1 << 16)
-#define IO_PORTX_INT_MII_THRESHOLD (1 << 8)
-#define IO_PORTX_INT_MII_RX_EOP (1 << 7)
-#define IO_PORTX_INT_MII_RX_SFD (1 << 6)
-#define IO_PORTX_INT_MII_RX_ERR (1 << 5)
-#define IO_PORTX_INT_MII_TX_EOP (1 << 4)
-#define IO_PORTX_INT_MII_COL (1 << 3)
-#define IO_PORTX_INT_MII_CRS (1 << 2)
-#define IO_PORTX_INT_MII_ODD_NIB_ERR (1 << 1)
-#define IO_PORTX_INT_MII_FALSE_CARRIER (1 << 0)
-
-/*
- * SerDes
- */
-#define IO_PORTX_INT_SERDES_TXBUF_VALID (1 << 16)
-#define IO_PORTX_INT_SERDES_RXERR (1 << 7)
-#define IO_PORTX_INT_SERDES_RXEOP (1 << 6)
-#define IO_PORTX_INT_SERDES_SYND (1 << 5)
-#define IO_PORTX_INT_SERDES_TXBE (1 << 4)
-#define IO_PORTX_INT_SERDES_TXEOP (1 << 3)
-#define IO_PORTX_INT_SERDES_SXLP (1 << 2)
-#define IO_PORTX_INT_SERDES_RXBF (1 << 1)
-#define IO_PORTX_INT_SERDES_RXCRS (1 << 0)
-
-#ifndef __ASSEMBLY__
-struct ubicom32_io_port {
- volatile u32_t function;
- volatile u32_t gpio_ctl;
- volatile u32_t gpio_out;
- volatile u32_t gpio_in;
- volatile u32_t int_status;
- volatile u32_t int_mask;
- volatile u32_t int_set;
- volatile u32_t int_clr;
- volatile u32_t tx_fifo;
- volatile u32_t tx_fifo_hi;
- volatile u32_t rx_fifo;
- volatile u32_t rx_fifo_hi;
- volatile u32_t ctl0;
- volatile u32_t ctl1;
- volatile u32_t ctl2;
- volatile u32_t status0;
- volatile u32_t status1;
- volatile u32_t status2;
- volatile u32_t fifo_watermark;
- volatile u32_t fifo_level;
- volatile u32_t gpio_mask;
-};
-
-#define UBICOM32_IO_PORT(port) ((struct ubicom32_io_port *)((port)))
-#endif
-
-#ifndef __ASSEMBLY__
-/*
- * ubicom32_set_interrupt()
- */
-extern inline void ubicom32_set_interrupt(u8_t interrupt)
-{
- u32_t ibit = INT_BIT_MASK(interrupt);
-
- if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) {
- asm volatile (
- "move.4 "D(INT_SET(INT_CHIP(0, 0)))", %0\n\t"
- :
- : "r" (ibit)
- );
-
- return;
- }
-
- asm volatile (
- "move.4 "D(INT_SET(INT_CHIP(1, 0)))", %0\n\t"
- :
- : "r" (ibit)
- );
-}
-
-/*
- * ubicom32_clear_interrupt()
- */
-extern inline void ubicom32_clear_interrupt(u8_t interrupt)
-{
- u32_t ibit = INT_BIT_MASK(interrupt);
-
- if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) {
- asm volatile (
- "move.4 "D(INT_CLR(INT_CHIP(0, 0)))", %0\n\t"
- :
- : "r" (ibit)
- );
-
- return;
- }
-
- asm volatile (
- "move.4 "D(INT_CLR(INT_CHIP(1, 0)))", %0\n\t"
- :
- : "r" (ibit)
- );
-}
-
-/*
- * ubicom32_enable_interrupt()
- */
-extern inline void ubicom32_enable_interrupt(u8_t interrupt)
-{
- u32_t ibit = INT_BIT_MASK(interrupt);
-
- if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) {
- asm volatile (
- "or.4 "D(INT_MASK(INT_CHIP(0, 0)))", "D(INT_MASK(INT_CHIP(0, 0)))", %0\n\t"
- :
- : "d" (ibit)
- );
-
- return;
- }
-
- asm volatile (
- "or.4 "D(INT_MASK(INT_CHIP(1, 0)))", "D(INT_MASK(INT_CHIP(1, 0)))", %0\n\t"
- :
- : "d" (ibit)
- );
-}
-
-/*
- * ubicom32_disable_interrupt()
- */
-extern inline void ubicom32_disable_interrupt(u8_t interrupt)
-{
- u32_t ibit = ~INT_BIT_MASK(interrupt);
-
- if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) {
- asm volatile (
- "and.4 "D(INT_MASK(INT_CHIP(0, 0)))", "D(INT_MASK(INT_CHIP(0, 0)))", %0\n\t"
- :
- : "d" (ibit)
- );
-
- return;
- }
-
- asm volatile (
- "and.4 "D(INT_MASK(INT_CHIP(1, 0)))", "D(INT_MASK(INT_CHIP(1, 0)))", %0\n\t"
- :
- : "d" (ibit)
- );
-}
-
-/*
- * ubicom32_enable_global_interrupts()
- */
-extern inline void ubicom32_enable_global_interrupts(void)
-{
- asm volatile(
- "bset GLOBAL_CTRL, GLOBAL_CTRL, #%bit("D(GLOBAL_CTRL_INT_EN)")"
- );
-}
-
-/*
- * ubicom32_disable_global_interrupts()
- */
-extern inline void ubicom32_disable_global_interrupts(void)
-{
- asm volatile(
- "bclr GLOBAL_CTRL, GLOBAL_CTRL, #%bit("D(GLOBAL_CTRL_INT_EN)")"
- );
-}
-
-/*
- * ubicom32_get_reset_reason()
- */
-extern inline u32_t ubicom32_get_reset_reason(void)
-{
- return *(u32_t *)(GENERAL_CFG_BASE + GEN_RESET_REASON);
-}
-
-/*
- * ubicom32_read_reg()
- */
-extern inline u32_t ubicom32_read_reg(volatile void *reg)
-{
- u32_t v;
- asm volatile (
- "move.4 %[dest], %[src] \n\t"
- : [dest] "=r" (v)
- : [src] "m" (*(u32_t *)reg)
- );
- return v;
-}
-
-/*
- * ubicom32_write_reg()
- */
-extern inline void ubicom32_write_reg(volatile void *reg, u32_t v)
-{
- asm volatile (
- "move.4 %[dest], %[src] \n\t"
- :
- : [src] "r" (v), [dest] "m" (*(u32_t *)reg)
- );
-}
-
-#endif /* __ASSEMBLY__ */
-#endif /* _ASM_UBICOM32_IP5000_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ipcbuf.h
- * Definition of ipc64_perm struct for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_IPCBUF_H
-#define _ASM_UBICOM32_IPCBUF_H
-
-/*
- * The user_ipc_perm structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* _ASM_UBICOM32_IPCBUF_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/irq.h
- * IRQ definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_IRQ_H
-#define _ASM_UBICOM32_IRQ_H
-
-#include <asm/irqflags.h>
-
-/*
- * We setup the IRQS to cover the full range of interrupt registers in
- * processor.
- */
-#define NR_IRQS 64
-
-#define irq_canonicalize(irq) (irq)
-
-extern int irq_soft_alloc(unsigned int *soft);
-extern void ack_bad_irq(unsigned int irq);
-extern void do_IRQ(int irq, struct pt_regs *fp);
-
-#endif /* _ASM_UBICOM32_IRQ_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/irq_regs.h
- * Generic irq_regs.h for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_IRQ_REGS_H
-#define _ASM_UBICOM32_IRQ_REGS_H
-
-#include <asm-generic/irq_regs.h>
-
-#endif /* _ASM_UBICOM32_IRQ_REGS_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/irqflags.h
- * Raw implementation of local IRQ functions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_IRQFLAGS_H
-#define _ASM_UBICOM32_IRQFLAGS_H
-
-#include <linux/thread_info.h>
-#include <asm/ubicom32-common.h>
-#if defined(CONFIG_SMP)
-#include <asm/smp.h>
-#endif
-#include <asm/ldsr.h>
-
-#if defined(CONFIG_PREEMPT)
-#error Not supported by Ubicom32 irq handling, yet!
-#endif
-
-/*
- * raw_local_irq_enable()
- * Enable interrupts for this thread.
- */
-static inline void raw_local_irq_enable(void)
-{
- ldsr_local_irq_enable();
-}
-
-/*
- * raw_local_irq_disable()
- * Disable interrupts for this thread.
- */
-static inline void raw_local_irq_disable(void)
-{
- ldsr_local_irq_disable();
-}
-
-/*
- * raw_local_save_flags()
- * Get the current IRQ state.
- */
-#define raw_local_save_flags(flags) \
-do { \
- (flags) = ldsr_local_irq_is_disabled(); \
-} while (0)
-
-/*
- * raw_local_irq_save()
- * Save the current interrupt state and disable interrupts.
- */
-#define raw_local_irq_save(flags) \
-do { \
- (flags) = ldsr_local_irq_save(); \
-} while (0)
-
-/*
- * raw_local_irq_restore()
- * Restore the IRQ state back to flags.
- */
-static inline void raw_local_irq_restore(unsigned long flags)
-{
- ldsr_local_irq_restore(flags);
-}
-
-/*
- * raw_irqs_disabled_flags()
- * Return true if the flags indicate that IRQ(s) are disabled.
- */
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
- return (flags);
-}
-
-#endif /* _ASM_UBICOM32_IRQFLAGS_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/kdebug.h
- * Generic kdebug.h for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_KDEBUG_H
-#define _ASM_UBICOM32_KDEBUG_H
-
-#include <asm-generic/kdebug.h>
-
-#endif /* _ASM_UBICOM32_KDEBUG_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/kmap_types.h
- * Definition of km_type's for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_KMAP_TYPES_H
-#define _ASM_UBICOM32_KMAP_TYPES_H
-
-enum km_type {
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BIO_SRC_IRQ,
- KM_BIO_DST_IRQ,
- KM_PTE0,
- KM_PTE1,
- KM_IRQ0,
- KM_IRQ1,
- KM_SOFTIRQ0,
- KM_SOFTIRQ1,
- KM_TYPE_NR
-};
-
-#endif /* _ASM_UBICOM32_KMAP_TYPES_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ldsr.h
- * Ubicom32 LDSR interface definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_LDSR_H
-#define _ASM_UBICOM32_LDSR_H
-
-#include <asm/ubicom32-common.h>
-#include <asm/types.h>
-#include <asm/thread.h>
-
-extern unsigned int ldsr_soft_irq_mask;
-
-/*
- * ldsr_local_irq_is_disabled()
- * Test if interrupts are disabled for this thread?
- */
-static inline int ldsr_local_irq_is_disabled(void)
-{
- int ret;
- thread_t self = thread_get_self();
- unsigned int mask = (1 << self);
-
- asm volatile (
- " and.4 %0, scratchpad1, %1 \n\t"
- : "=r" (ret)
- : "d" (mask)
- : "cc"
- );
-
- /*
- * We return a simple 1 == disabled, 0 == enabled
- * losing which tid this is for, because Linux
- * can restore interrupts on a different thread.
- */
- return ret >> self;
-}
-
-/*
- * ldsr_local_irq_save()
- * Get the current interrupt state and disable interrupts.
- */
-static inline unsigned int ldsr_local_irq_save(void)
-{
- int ret;
- thread_t self = thread_get_self();
- unsigned int mask = (1 << self);
-
- /*
- * Ensure the compiler can not optimize out the code
- * (volatile) and that it does not "cache" values around
- * the interrupt state change (memory). This ensures
- * that interrupt changes are treated as a critical
- * section.
- */
- asm volatile (
- " and.4 %0, scratchpad1, %1 \n\t"
- " or.4 scratchpad1, scratchpad1, %1 \n\t"
- : "=&r" (ret)
- : "d" (mask)
- : "cc", "memory"
- );
-
- /*
- * We return a simple 1 == disabled, 0 == enabled
- * losing which tid this is for, because Linux
- * can restore interrupts on a different thread.
- */
- return ret >> self;
-}
-
-/*
- * ldsr_local_irq_restore()
- * Restore this cpu's interrupt enable/disable state.
- *
- * Note: flags is either 0 or 1.
- */
-static inline void ldsr_local_irq_restore(unsigned int flags)
-{
- unsigned int temp;
- thread_t self = thread_get_self();
- unsigned int mask = (1 << self);
- flags = (flags << self);
-
- /*
- * Ensure the compiler can not optimize out the code
- * (volatile) and that it does not "cache" values around
- * the interrupt state change (memory). This ensures
- * that interrupt changes are treated as a critical
- * section.
- *
- * Atomic change to our bit in scratchpad1 without
- * causing any temporary glitch in the value and
- * without effecting other values. Also this uses
- * no branches so no penalties.
- */
- asm volatile (
- " xor.4 %0, scratchpad1, %1 \n\t"
- " and.4 %0, %2, %0 \n\t"
- " xor.4 scratchpad1, scratchpad1, %0 \n\t"
- " move.4 int_set0, %3 \n\t"
- : "=&d"(temp)
- : "d"(flags), "r"(mask), "r"(ldsr_soft_irq_mask)
- : "cc", "memory"
- );
-}
-
-/*
- * ldsr_local_irq_disable_interrupt()
- * Disable ints for this thread.
- */
-static inline void ldsr_local_irq_disable(void)
-{
- unsigned int mask = (1 << thread_get_self());
-
- /*
- * Ensure the compiler can not optimize out the code
- * (volatile) and that it does not "cache" values around
- * the interrupt state change (memory). This ensures
- * that interrupt changes are treated as a critical
- * section.
- */
- asm volatile (
- " or.4 scratchpad1, scratchpad1, %0 \n\t"
- :
- : "d" (mask)
- : "cc", "memory"
- );
-}
-
-/*
- * ldsr_local_irq_enable_interrupt
- * Enable ints for this thread.
- */
-static inline void ldsr_local_irq_enable(void)
-{
- unsigned int mask = (1 << thread_get_self());
-
- /*
- * Ensure the compiler can not optimize out the code
- * (volatile) and that it does not "cache" values around
- * the interrupt state change (memory). This ensures
- * that interrupt changes are treated as a critical
- * section.
- */
- asm volatile (
- " and.4 scratchpad1, scratchpad1, %0 \n\t"
- " move.4 int_set0, %1 \n\t"
- :
- : "d" (~mask), "r" (ldsr_soft_irq_mask)
- : "cc", "memory"
- );
-}
-
-extern void ldsr_init(void);
-extern void ldsr_set_trap_irq(unsigned int irq);
-extern void ldsr_mask_vector(unsigned int vector);
-extern void ldsr_unmask_vector(unsigned int vector);
-extern void ldsr_enable_vector(unsigned int vector);
-extern void ldsr_disable_vector(unsigned int vector);
-extern thread_t ldsr_get_threadid(void);
-
-#endif /* _ASM_UBICOM32_LDSR_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/linkage.h
- * Definition of Ubicom32 architecture specific linkage types.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_LINKAGE_H
-#define _ASM_UBICOM32_LINKAGE_H
-
-#define __ocm_text __section(.ocm_text)
-#define __ocm_data __section(.ocm_data)
-
-#endif /* _ASM_UBICOM32_LINKAGE_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/local.h
- * Generic local.h for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_LOCAL_H
-#define _ASM_UBICOM32_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* _ASM_UBICOM32_LOCAL_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/machdep.h
- * Machine dependent utility routines.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_MACHDEP_H
-#define _ASM_UBICOM32_MACHDEP_H
-
-#include <linux/interrupt.h>
-
-/* Hardware clock functions */
-extern unsigned long hw_timer_offset(void);
-
-/* machine dependent power off functions */
-extern void (*mach_reset)(void);
-extern void (*mach_halt)(void);
-extern void (*mach_power_off)(void);
-
-extern void config_BSP(char *command, int len);
-
-#endif /* _ASM_UBICOM32_MACHDEP_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/mc146818rtc.h
- * Generic mc146818rtc.h for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _ASM_UBICOM32_MC146818RTC_H
-#define _ASM_UBICOM32_MC146818RTC_H
-
-/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
-
-#endif /* _ASM_UBICOM32_MC146818RTC_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/memory_map.h
- * Machine memory maps/
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_MEMORY_MAP_H
-#define _ASM_UBICOM32_MEMORY_MAP_H
-
-/*
- * Memory Size
- */
-#define OCM_SECTOR_SIZE 0x00008000 /* 32K */
-
-#if defined(CONFIG_UBICOM32_V3)
-#define OCMSIZE 0x00030000 /* 192K on-chip RAM for both program and data */
-#elif defined(CONFIG_UBICOM32_V4)
-#define OCMSIZE 0x0003C000 /* 240K on-chip RAM for both program and data */
-#else
-#error "Unknown IP5K silicon"
-#endif
-
-#define OCMSTART 0x3ffc0000 /* alias from 0x03000000 for easy
- * jump to/from SDRAM */
-#define OCMEND (OCMSTART + OCMSIZE)
-
-#define SDRAMSTART 0x40000000
-
-#define KERNELSTART (SDRAMSTART + 0x00400000)
-
-#define FLASHSTART 0x60000000
-
-/*
- * CODELOADER / OS_SYSCALL OCM Reservations
- * Don't change these unless you know what you are doing.
- */
-#define CODELOADER_SIZE 0x30
-#define CODELOADER_BEGIN OCMSTART /* Must be OCM start for gdb to work. */
-#define CODELOADER_END (CODELOADER_BEGIN + CODELOADER_SIZE)
-
-#define OS_SYSCALL_BEGIN CODELOADER_END /* system_call at this address */
-#define OS_SYSCALL_SIZE (512 - CODELOADER_SIZE)
-#define OS_SYSCALL_END (OS_SYSCALL_BEGIN + OS_SYSCALL_SIZE)
-
-#endif /* _ASM_UBICOM32_MEMORY_MAP_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/mman.h
- * Memory mapping definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_MMAN_H
-#define _ASM_UBICOM32_MMAN_H
-
-#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
-#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-#define MAP_LOCKED 0x2000 /* pages are locked */
-#define MAP_NORESERVE 0x4000 /* don't check for reservations */
-#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-
-#define MCL_CURRENT 1 /* lock all current mappings */
-#define MCL_FUTURE 2 /* lock all future mappings */
-
-#endif /* _ASM_UBICOM32_MMAN_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/mmu.h
- * Definition of mm_context_t struct for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 2002, David McCullough <davidm@snapgear.com>
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_MMU_H
-#define _ASM_UBICOM32_MMU_H
-
-typedef struct {
- struct vm_list_struct *vmlist;
- unsigned long end_brk;
-#ifdef CONFIG_BINFMT_ELF_FDPIC
- unsigned long exec_fdpic_loadmap;
- unsigned long interp_fdpic_loadmap;
-#endif
-} mm_context_t;
-
-#endif /* _ASM_UBICOM32_MMU_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/mmu_context.h
- * MMU context definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 2004, Microtronix Datacom Ltd., All rights reserved.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#ifndef _ASM_UBICOM32_MMU_CONTEXT_H
-#define _ASM_UBICOM32_MMU_CONTEXT_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-extern inline int
-init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
- // mm->context = virt_to_phys(mm->pgd);
- return(0);
-}
-
-#define destroy_context(mm) do { } while(0)
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
-{
-}
-
-#define deactivate_mm(tsk,mm) do { } while (0)
-
-extern inline void activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
-{
-}
-
-#endif /* _ASM_UBICOM32_MMU_CONTEXT_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/module.h
- * Ubicom32 architecture specific module definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_MODULE_H
-#define _ASM_UBICOM32_MODULE_H
-
-struct mod_arch_specific {
- void *ocm_inst;
- int ocm_inst_size;
-};
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
-#define ARCH_PROC_MODULES_EXTRA(m,mod) \
- seq_printf(m, " OCM(%d bytes @ 0x%p)", \
- (mod)->arch.ocm_inst_size, (mod)->arch.ocm_inst)
-
-#define ARCH_OOPS_MODULE_EXTRA(mod) \
- printk(KERN_INFO "%p %u OCM(%p %u)\n", \
- (mod)->module_core, (mod)->core_size, \
- (mod)->arch.ocm_inst, (mod)->arch.ocm_inst_size)
-#endif /* _ASM_UBICOM32_MODULE_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/msgbuf.h
- * Definition of msqid64_ds struct for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_MSGBUF_H
-#define _ASM_UBICOM32_MSGBUF_H
-
-/*
- * The msqid64_ds structure for ubicom32 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
- struct ipc64_perm msg_perm;
- __kernel_time_t msg_stime; /* last msgsnd time */
- unsigned long __unused1;
- __kernel_time_t msg_rtime; /* last msgrcv time */
- unsigned long __unused2;
- __kernel_time_t msg_ctime; /* last change time */
- unsigned long __unused3;
- unsigned long msg_cbytes; /* current number of bytes on queue */
- unsigned long msg_qnum; /* number of messages in queue */
- unsigned long msg_qbytes; /* max number of bytes on queue */
- __kernel_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_pid_t msg_lrpid; /* last receive pid */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-#endif /* _ASM_UBICOM32_MSGBUF_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/mutex.h
- * Generic mutex.h for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#ifndef _ASM_UBICOM32_MUTEX_H
-#define _ASM_UBICOM32_MUTEX_H
-
-#include <asm-generic/mutex-dec.h>
-
-#endif /* _ASM_UBICOM32_MUTEX_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/namei.h
- * Definition of __emul_prefix() for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_NAMEI_H
-#define _ASM_UBICOM32_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* _ASM_UBICOM32_NAMEI_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ocm-alloc.h
- * Ubicom32 architecture specific ocm definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_OCM_ALLOC_H
-#define _ASM_UBICOM32_OCM_ALLOC_H
-
-
-extern void *ocm_inst_alloc(size_t size, pid_t pid);
-extern int ocm_free(const void *ptr);
-extern int ocm_inst_free(const void *ptr);
-
-#endif /* _ASM_UBICOM32_OCM_ALLOC_H */
+++ /dev/null
-#define APP_OCM_CODE_SIZE (0x3ffc2e00-0x3ffc0000)
-#define APP_OCM_DATA_SIZE (0x3ffd3500-0x3ffc8000)
-
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ocm_text.lds.inc
- * <TODO: Replace with short file description>
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-*(.text.do_csum)
-*(.text.tcp_packet)
-*(.text.ipt_do_table)
-*(.text.nf_conntrack_in)
-*(.text.ip_forward)
-*(.text.dev_queue_xmit)
-*(.text.netif_receive_skb)
-*(.text.ip_route_input)
-*(.text.ip_finish_output)
-*(.text.nf_iterate)
-*(.text.__hash_conntrack)
-*(.text.memset)
-*(.text.memcpy)
-*(.text.ip_rcv)
-*(.text.__nf_conntrack_find)
-*(.text.dev_hard_start_xmit)
-*(.text.vlan_dev_hard_start_xmit)
-*(.text.vlan_dev_hard_header)
-*(.text.__nf_ct_refresh_acct)
-*(.text.tcp_error)
-*(.text.pfifo_fast_enqueue)
-*(.text.ipv4_confirm)
-*(.text.ip_output)
-*(.text.neigh_connected_output)
-*(.text.nf_hook_slow)
-*(.text.nf_nat_packet)
-*(.text.local_bh_enable)
-*(.text.pfifo_fast_dequeue)
-*(.text.ubi32_eth_receive)
-*(.text.nf_nat_fn)
-*(.text.skb_checksum)
-*(.text.memmove)
-*(.text.ubi32_eth_tx_done)
-*(.text.eth_header)
-*(.text.skb_release_data)
-*(.text.nf_conntrack_find_get)
-*(.text.process_backlog)
-*(.text.vlan_skb_recv)
-*(.text.ip_rcv_finish)
-*(.text.__qdisc_run)
-*(.text.skb_push)
-*(.text.eth_type_trans)
-*(.text.__alloc_skb)
-*(.text.netif_rx)
-*(.text.nf_ip_checksum)
-*(.text.__skb_checksum_complete_head)
-*(.text.ipv4_conntrack_defrag)
-*(.text.tcp_pkt_to_tuple)
-*(.text.kfree)
-*(.text.tcp_manip_pkt)
-*(.text.skb_put)
-*(.text.nf_ct_get_tuple)
-*(.text.__kmalloc)
-*(.text.ubi32_eth_start_xmit)
-*(.text.free_block)
-*(.text.ipt_hook)
-*(.text.kmem_cache_free)
-*(.text.skb_pull_rcsum)
-*(.text.cache_alloc_refill)
-*(.text.skb_release_head_state)
-*(.text.manip_pkt)
-*(.text.ip_sabotage_in)
-*(.text.ip_forward_finish)
-*(.text.kmem_cache_alloc)
-*(.text.local_bh_disable)
-*(.text.ipv4_pkt_to_tuple)
-*(.text.inet_proto_csum_replace4)
-*(.text.__nf_ct_l4proto_find)
-*(.text.csum_partial)
-*(.text.neigh_resolve_output)
-*(.text.__kfree_skb)
-*(.text.kfree_skb)
-*(.text.__find_vlan_dev)
-*(.text.ldsr_ctxsw_thread)
-*(.text.__do_IRQ)
-*(.text.skb_pull)
-*(.text.ipv4_invert_tuple)
-*(.text.nf_ct_invert_tuplepr)
-*(.text.skb_make_writable)
-*(.text.ipv4_get_l4proto)
-*(.text.handle_IRQ_event)
-*(.text.net_rx_action)
-*(.text.__do_softirq)
-*(.text.nf_nat_in)
-*(.text.note_interrupt)
-*(.text.ipv4_conntrack_in)
-*(.text.dst_release)
-*(.text.tasklet_action)
-*(.text.nf_nat_out)
-*(.text.nf_ct_invert_tuple)
-*(.text.do_IRQ)
-*(.text.__tasklet_schedule)
-*(.text.__skb_checksum_complete)
-*(.text.ubi32_eth_interrupt)
-*(.text.dev_kfree_skb_any)
-*(.text.ret_from_interrupt_to_kernel)
-*(.text.preemptive_context_save)
-*(.text.irq_ack_vector)
-*(.text.update_wall_time)
-*(.text.ldsr_thread)
-*(.text.irq_exit)
-*(.text.ubi32_eth_do_tasklet)
-*(.text.__napi_schedule)
-*(.text.idle_cpu)
-*(.text.run_timer_softirq)
-*(.text.ldsr_mask_vector)
-*(.text.irq_enter)
-*(.text.ldsr_get_lsb)
-*(.text.ldsr_unmask_vector)
-*(.text.ip_fast_csum)
-*(.text.hrtimer_run_queues)
-*(.text.tcp_invert_tuple)
-*(.text.T___705)
-*(.text.run_posix_cpu_timers)
-*(.text.free_hot_cold_page)
-*(.text.lock_timer_base)
-*(.text.calc_delta_mine)
-*(.text.slab_destroy)
-*(.text.rcu_pending)
-*(.text.scheduler_tick)
-*(.text.hrtimer_run_pending)
-*(.text.do_softirq)
-*(.text.del_timer)
-*(.text.irq_end_vector)
-*(.text.pci_read_u32)
-*(.text.udivmodsi4)
-*(.text.memcmp)
-*(.text.memset)
-*(.text.__slab_alloc)
-*(.text.br_handle_frame)
-*(.text.br_fdb_update)
-*(.text.__br_fdb_get)
-*(.text.br_forward)
-*(.text.br_handle_frame_finish)
-*(.text.pci_write_u32)
-*(.text.kmem_freepages)
-*(.text.br_dev_queue_push_xmit)
-*(.text.ioread32)
-*(.text.next_zones_zonelist)
-*(.text.ubi32_pci_read_u32)
-*(.text.zone_watermark_ok)
-*(.text.__rmqueue_smallest)
-*(.text.ubi32_eth_napi_poll)
-*(.text.ubi32_pci_write_u32)
-*(.text.ubi32_pci_read_u32)
-*(.text._local_bh_enable)
-*(.text._local_bh_disable)
-*(.text.get_slab)
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/page.h
- * Memory page related operations and definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_PAGE_H
-#define _ASM_UBICOM32_PAGE_H
-
-#include <linux/const.h>
-
-/* PAGE_SHIFT determines the page size */
-
-#define PAGE_SHIFT (12)
-#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE-1))
-
-#include <asm/setup.h>
-
-#ifndef __ASSEMBLY__
-
-#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr) free_page(addr)
-
-#define clear_page(page) memset((page), 0, PAGE_SIZE)
-#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
-
-#define clear_user_page(page, vaddr, pg) clear_page(page)
-#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
-
-#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
- alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd[16]; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pte_val(x) ((x).pte)
-#define pmd_val(x) ((&x)->pmd[0])
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pte(x) ((pte_t) { (x) } )
-#define __pmd(x) ((pmd_t) { (x) } )
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x) ((pgprot_t) { (x) } )
-
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
-#endif /* !__ASSEMBLY__ */
-
-#include <asm/page_offset.h>
-
-#define PAGE_OFFSET (PAGE_OFFSET_RAW)
-
-#ifndef __ASSEMBLY__
-
-#define __pa(vaddr) virt_to_phys((void *)(vaddr))
-#define __va(paddr) phys_to_virt((unsigned long)(paddr))
-
-#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
-
-#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
-
-#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn))
-#define page_to_pfn(page) virt_to_pfn(page_to_virt(page))
-#define pfn_valid(pfn) ((pfn) < max_mapnr)
-
-#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
- ((void *)(kaddr) < (void *)memory_end))
-
-#endif /* __ASSEMBLY__ */
-
-#define VM_DATA_DEFAULT_FLAGS \
- (VM_READ | VM_WRITE | \
- ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#include <linux/version.h>
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
-#include <asm-generic/getorder.h>
-#else
-#include <asm-generic/page.h>
-#endif
-
-#endif /* _ASM_UBICOM32_PAGE_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/page_offset.h
- * Definition of PAGE_OFFSET_RAW for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#ifndef _ASM_UBICOM32_PAGE_OFFSET_H
-#define _ASM_UBICOM32_PAGE_OFFSET_H
-
-/* This handles the memory map.. */
-#define PAGE_OFFSET_RAW 0x3ffc0000
-
-#endif /* _ASM_UBICOM32_PAGE_OFFSET_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/param.h
- * Definition of miscellaneous constants, including HZ.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_PARAM_H
-#define _ASM_UBICOM32_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ CONFIG_HZ
-#define USER_HZ HZ
-#define CLOCKS_PER_SEC (USER_HZ)
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 4096
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif /* _ASM_UBICOM32_PARAM_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/pci.h
- * Definitions of PCI operations for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_PCI_H
-#define _ASM_UBICOM32_PCI_H
-
-#include <asm/io.h>
-
-/* The PCI address space does equal the physical memory
- * address space. The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS (1)
-
-
-
-/*
- * Perform a master read/write to the PCI bus.
- * These functions return a PCI_RESP_xxx code.
- */
-extern u8 pci_read_u32(u8 pci_cmd, u32 address, u32 *data);
-extern u8 pci_write_u32(u8 pci_cmd, u32 address, u32 data);
-extern u8 pci_read_u16(u8 pci_cmd, u32 address, u16 *data);
-extern u8 pci_write_u16(u8 pci_cmd, u32 address, u16 data);
-extern u8 pci_read_u8(u8 pci_cmd, u32 address, u8 *data);
-extern u8 pci_write_u8(u8 pci_cmd, u32 address, u8 data);
-
-
-#define PCIBIOS_MIN_IO 0x100
-#define PCIBIOS_MIN_MEM 0x10000000
-
-#define pcibios_assign_all_busses() 0
-#define pcibios_scan_all_fns(a, b) 0
-extern void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
- struct resource *res);
-
-extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
- struct pci_bus_region *region);
-
-struct pci_sys_data;
-struct pci_bus;
-
-struct hw_pci {
- struct list_head buses;
- int nr_controllers;
- int (*setup)(int nr, struct pci_sys_data *);
- struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
- void (*preinit)(void);
- void (*postinit)(void);
- u8 (*swizzle)(struct pci_dev *dev, u8 *pin);
- int (*map_irq)(struct pci_dev *dev, u8 slot, u8 pin);
-};
-
-/*
- * Per-controller structure
- */
-struct pci_sys_data {
- struct list_head node;
- int busnr; /* primary bus number */
- u64 mem_offset; /* bus->cpu memory mapping offset */
- unsigned long io_offset; /* bus->cpu IO mapping offset */
- struct pci_bus *bus; /* PCI bus */
- struct resource *resource[3]; /* Primary PCI bus resources */
- /* Bridge swizzling */
- u8 (*swizzle)(struct pci_dev *, u8 *);
- /* IRQ mapping */
- int (*map_irq)(struct pci_dev *, u8, u8);
- struct hw_pci *hw;
-};
-
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
- struct resource *root = NULL;
-
- if (res->flags & IORESOURCE_IO)
- root = &ioport_resource;
- if (res->flags & IORESOURCE_MEM)
- root = &iomem_resource;
-
- return root;
-}
-
-static inline void pcibios_set_master(struct pci_dev *dev)
-{
- /* No special bus mastering setup handling */
-}
-#define HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE 1
-#define HAVE_ARCH_PCI_SET_DMA_SEGMENT_BOUNDARY 1
-
-#ifdef CONFIG_PCI
-static inline void * pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
- dma_addr_t *dma_handle)
-{
- void *vaddr = kmalloc(size, GFP_KERNEL);
- if(vaddr != NULL) {
- *dma_handle = virt_to_phys(vaddr);
- }
- return vaddr;
-}
-
-static inline int pci_dma_supported(struct pci_dev *hwdev, dma_addr_t mask)
-{
- return 1;
-}
-
-static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
- void *cpu_addr, dma_addr_t dma_handle)
-{
- kfree(cpu_addr);
- return;
-}
-
-static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr,
- size_t size, int direction)
-{
- return virt_to_phys(ptr);
-}
-
-static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
- size_t size, int direction)
-{
- return;
-}
-
-static inline dma_addr_t
-pci_map_page(struct pci_dev *hwdev, struct page *page,
- unsigned long offset, size_t size, int direction)
-{
- return pci_map_single(hwdev, page_address(page) + offset, size, (int)direction);
-}
-
-static inline void
-pci_unmap_page(struct pci_dev *hwdev, dma_addr_t dma_address,
- size_t size, int direction)
-{
- pci_unmap_single(hwdev, dma_address, size, direction);
-}
-
-static inline int
-pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
- int nents, int direction)
-{
- return nents;
-}
-
-static inline void
-pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
- int nents, int direction)
-{
-}
-
-static inline void
-pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg,
- int nelems, int direction)
-{
-}
-
-static inline void
-pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg,
- int nelems, int direction)
-{
-}
-
-static inline void
-pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle,
- size_t size, int direction)
-{
-}
-
-static inline void
-pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle,
- size_t size, int direction)
-{
-}
-
-static inline int
-pci_dma_mapping_error(struct pci_dev *hwdev, dma_addr_t dma_addr)
-{
- return dma_addr == 0;
-}
-extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
-#endif
-
-#endif /* _ASM_UBICOM32_PCI_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/pcm_tio.h
- * Ubicom32 architecture PCM TIO definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-#ifndef _ASM_UBICOM32_PCM_TIO_H
-#define _ASM_UBICOM32_PCM_TIO_H
-
-#include <asm/devtree.h>
-
-#define PCM_TIO_REGS_VERSION 2
-struct pcm_tio_regs {
- /*
- * set this value to 1 to reload the parameters and restart the HRT
- */
- u32_t reload;
-
- /*
- * Pointers to the input and output buffers
- */
- void *input_buf;
- void *output_buf;
-
- /*
- * Buffer size (see pcm_hrt.S for constraints)
- */
- u32_t buffer_size;
-
- /*
- * Current cycle. This variable increases every time half the buffer
- * is consumed.
- */
- u32_t cycle;
-
- /*
- * Fields below this line are not accessed by the HRT. They are purely
- * informational for the user of this TIO.
- */
-
- /*
- * Version of this structure
- */
- u32_t version;
-
- /*
- * Number of channels supported
- */
- u32_t channels;
-
- /*
- * Maximum buffer size
- */
- u32_t max_buffer_size;
-};
-
-/*
- * Our device node
- */
-#define PCM_TIO_NODE_VERSION 1
-struct pcm_tio_node {
- struct devtree_node dn;
- u32_t version;
- struct pcm_tio_regs *regs;
-};
-
-#endif
-
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/percpu.h
- * Generic percpu.h for the Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_PERCPU_H
-#define _ASM_UBICOM32_PERCPU_H
-
-#include <asm-generic/percpu.h>
-
-#endif /* _ASM_UBICOM32_PERCPU_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/pgalloc.h
- * Page table allocation definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_PGALLOC_H
-#define _ASM_UBICOM32_PGALLOC_H
-
-#include <linux/mm.h>
-#include <asm/setup.h>
-
-#define check_pgt_cache() do { } while (0)
-
-#endif /* _ASM_UBICOM32_PGALLOC_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/pgtable.h
- * Ubicom32 pseudo page table definitions and operations.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 2004 Microtronix Datacom Ltd
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- * and various works, Alpha, ix86, M68K, Sparc, ...et al
- */
-#ifndef _ASM_UBICOM32_PGTABLE_H
-#define _ASM_UBICOM32_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-//vic - this bit copied from m68knommu version
-#include <asm/setup.h>
-#include <asm/io.h>
-#include <linux/sched.h>
-
-typedef pte_t *pte_addr_t;
-
-#define pgd_present(pgd) (1) /* pages are always present on NO_MM */
-#define pgd_none(pgd) (0)
-#define pgd_bad(pgd) (0)
-#define pgd_clear(pgdp)
-#define kern_addr_valid(addr) (1)
-#define pmd_offset(a, b) ((void *)0)
-
-#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */
-#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */
-#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */
-#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */
-#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */
-//vic - this bit copied from m68knommu version
-
-extern void paging_init(void);
-#define swapper_pg_dir ((pgd_t *) 0)
-
-#define __swp_type(x) (0)
-#define __swp_offset(x) (0)
-#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-
-/*
- * pgprot_noncached() is only for infiniband pci support, and a real
- * implementation for RAM would be more complicated.
- */
-#define pgprot_noncached(prot) (prot)
-
-static inline int pte_file(pte_t pte) { return 0; }
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr) (virt_to_page(0))
-
-extern unsigned int kobjsize(const void *objp);
-extern int is_in_rom(unsigned long);
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init() do { } while (0)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-extern inline void flush_cache_mm(struct mm_struct *mm)
-{
-}
-
-extern inline void flush_cache_range(struct mm_struct *mm,
- unsigned long start,
- unsigned long end)
-{
-}
-
-/* Push the page at kernel virtual address and clear the icache */
-extern inline void flush_page_to_ram (unsigned long address)
-{
-}
-
-/* Push n pages at kernel virtual address and clear the icache */
-extern inline void flush_pages_to_ram (unsigned long address, int n)
-{
-}
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define VMALLOC_START 0
-#define VMALLOC_END 0xffffffff
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
-#include <asm-generic/pgtable.h>
-#else
-#define arch_enter_lazy_mmu_mode() do {} while (0)
-#define arch_leave_lazy_mmu_mode() do {} while (0)
-#define arch_flush_lazy_mmu_mode() do {} while (0)
-#define arch_enter_lazy_cpu_mode() do {} while (0)
-#define arch_leave_lazy_cpu_mode() do {} while (0)
-#define arch_flush_lazy_cpu_mode() do {} while (0)
-#endif
-
-#endif /* _ASM_UBICOM32_PGTABLE_H */
+++ /dev/null
-/*
- * plio.h
- * PLIO defines.
- *
- * Copyright © 2009 Ubicom Inc. <www.ubicom.com>. All Rights Reserved.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can
- * redistribute it and/or modify it under the terms of the GNU General
- * Public License as published by the Free Software Foundation, either
- * version 2 of the License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- * This file contains confidential information of Ubicom, Inc. and your use of
- * this file is subject to the Ubicom Software License Agreement distributed with
- * this file. If you are uncertain whether you are an authorized user or to report
- * any unauthorized use, please contact Ubicom, Inc. at +1-408-789-2200.
- * Unauthorized reproduction or distribution of this file is subject to civil and
- * criminal penalties.
- */
-
-#ifndef __PLIO__H__
-#define __PLIO__H__
-
-#include <asm/ip5000.h>
-#include <asm/thread.h>
-
-#define PLIO_PORT RD
-#define PLIO_EXT_PORT RI
-
-#define TRANSMIT_FIFO_WATERMARK 8
-
-/*
- * PLIO non-blocking register definitions
- */
-#define PLIO_FN 2
-
-typedef struct {
- unsigned : 10;
- unsigned rxfifo_thread_enable: 1; /* allowed rxfifo thread enable */
- unsigned : 1;
- unsigned rxfifo_thread: 4; /* allowed rxfifo thread access */
- unsigned : 4;
- unsigned br_thread: 4; /* allowed blocking region thread access */
- unsigned fn_reset: 4; /* function reset bit vector */
- unsigned rxfifo_sel: 1; /* select between RXFIFO 0 and 1 */
- unsigned fn_sel: 3; /* select port function */
-} plio_io_function_t;
-
-typedef struct {
- unsigned : 24;
- unsigned pin:8;
-} plio_gpio_t;
-
-typedef struct {
- unsigned : 16;
- unsigned txfifo_uf: 1; /* TXFIFO underflow */
- unsigned txfifo_wm: 1; /* TXFIFO watermark */
- unsigned rxfifo_of: 1; /* RXFIFO overflow */
- unsigned rxfifo_wm: 1; /* RXFIFO watermark */
- unsigned : 5;
- unsigned lreg_int_addr_rd: 1; /* read from specified LREG address */
- unsigned lreg_int_addr_wr: 1; /* write to specified LREG address */
- unsigned extctl_int: 4; /* synchronized external interrupts */
- unsigned pfsm_int: 1; /* state machine */
-} plio_intstat_t;
-
-typedef struct {
- unsigned txfifo_reset: 1; /* TXFIFO reset for int_set only */
- unsigned rxfifo_reset: 1; /* RXFIFO reset for int_set only */
- unsigned : 11;
- unsigned idif_txfifo_flush: 1; /* flush TXFIFO and idif_txfifo */
- unsigned idif_rxfifo_flush: 1; /* flush RXFIFO and idif_rxfifo */
- unsigned pfsm_start: 1; /* input to fsm */
- unsigned txfifo_uf: 1; /* TXFIFO underflow */
- unsigned txfifo_wm: 1; /* TXFIFO watermark */
- unsigned rxfifo_of: 1; /* RXFIFO overflow */
- unsigned rxfifo_wm: 1; /* RXFIFO watermark */
- unsigned : 5;
- unsigned lreg_int_addr_rd: 1; /* read from specified LREG address */
- unsigned lreg_int_addr_wr: 1; /* write to specified LREG address */
- unsigned extctl_int: 4; /* synchronized external interrupts */
- unsigned pfsm_int: 1; /* state machine */
-} plio_intset_t;
-
-typedef enum {
- PLIO_PORT_MODE_D,
- PLIO_PORT_MODE_DE,
- PLIO_PORT_MODE_DI,
- PLIO_PORT_MODE_DEI,
- PLIO_PORT_MODE_DC,
-} plio_port_mode_t;
-
-typedef enum {
- PLIO_CLK_CORE, /* CORE CLK */
- PLIO_CLK_IO, /* IO CLK */
- PLIO_CLK_EXT, /* EXT CLK */
-} plio_clk_src_t;
-typedef struct {
- unsigned : 4;
- unsigned edif_iaena_sel: 1; /* Input Address Enable Select */
- unsigned edif_iaclk_sel: 1; /* Input Address Clock Select */
- unsigned edif_iald_inv: 1; /* Input Address Strobe Invert */
- unsigned edif_idclk_sel: 1; /* Input Data Clock Select */
- unsigned edif_idld_inv: 1; /* Input Data Strobe Invert */
- unsigned edif_ds: 3; /* specify IDR and ODR data shift */
- unsigned edif_cmp_mode: 1; /* configure IDR comparator output */
- unsigned edif_idena_sel: 1; /* Input Data Enable Select */
- unsigned ecif_extclk_ena: 1; /* plio_extctl output select */
- unsigned idif_tx_fifo_cmd_sel: 1; /* select pfsm_cmd data word position */
- unsigned ptif_porti_cfg: 2; /* select port I pin configuration */
- unsigned ptif_portd_cfg: 3; /* select port D pin configuration */
- plio_port_mode_t ptif_port_mode: 3; /* select other plio ports */
- unsigned icif_clk_plio_ext_inv: 1; /* invert external plio clock when set */
- unsigned icif_rst_plio: 1; /* reset plio function and io fifos */
- plio_clk_src_t icif_clk_src_sel: 2; /* select plio clock source */
- unsigned pfsm_prog: 1; /* enable pfsm programming */
- unsigned pfsm_cmd: 3; /* software input to pfsm */
-} plio_fctl0_t;
-
-typedef struct {
- unsigned : 2;
- unsigned idif_byteswap_tx: 3; /* swap TXFIFO byte order */
- unsigned idif_byteswap_rx: 3; /* swap RXFIFO byte order */
- unsigned : 1;
- unsigned lreg_ena: 1; /* enable local register map */
- unsigned lreg_addr_fifo_cmp_ena: 1; /* enable a specific LREG address from/to TX/RX fifos */
- unsigned lreg_addr_fifo_cmp: 5; /* LREG address routed from/to TX/RX fifos */
- unsigned : 1;
- unsigned dcod_iald_idld_sel: 2; /* select address/data strobes */
- unsigned dcod_rw_src_sel: 1; /* select LREG strobe source */
- unsigned dcod_rd_sel: 5; /* select read strobe source */
- unsigned dcod_wr_sel: 5; /* select write strobe source */
- unsigned dcod_rd_lvl: 1; /* select active level of read strobe */
- unsigned dcod_wr_lvl: 1; /* select active level of read strobe */
-} plio_fctl1_t;
-
-typedef struct {
- unsigned icif_eclk_div: 16; /* external plio clock divider */
- unsigned icif_iclk_div: 16; /* internal plio clock divider */
-} plio_fctl2_t;
-
-typedef struct {
- unsigned : 27;
- unsigned pfsm_state: 5; /* current pfsm state */
-} plio_stat_0_t;
-
-typedef struct {
- unsigned : 3;
- unsigned lreg_r_int_addr: 5;
- unsigned : 11;
- unsigned lreg_w_int_addr: 5;
- unsigned lreg_w_int_data: 8;
-} plio_stat_1_t;
-
-typedef struct {
- unsigned : 32;
-} plio_stat_2_t;
-
-typedef struct {
- unsigned tx: 16;
- unsigned rx: 16;
-} plio_io_fifo_wm_t, plio_io_fifo_lvl_t;
-
-
-/* plio blocking region register definitions
- */
-typedef struct {
- unsigned ns1: 5;
- unsigned ic1: 7;
- unsigned ec1: 4;
- unsigned ns0: 5;
- unsigned ic0: 7;
- unsigned ec0: 4;
-} plio_sram_t;
-
-typedef struct {
- unsigned : 2;
- unsigned s9: 3;
- unsigned s8: 3;
- unsigned s7: 3;
- unsigned s6: 3;
- unsigned s5: 3;
- unsigned s4: 3;
- unsigned s3: 3;
- unsigned s2: 3;
- unsigned s1: 3;
- unsigned s0: 3;
-} plio_grpsel_t;
-
-typedef struct {
- unsigned s7: 4;
- unsigned s6: 4;
- unsigned s5: 4;
- unsigned s4: 4;
- unsigned s3: 4;
- unsigned s2: 4;
- unsigned s1: 4;
- unsigned s0: 4;
-} plio_cs_lut_t;
-
-typedef struct {
- unsigned lut3: 8;
- unsigned lut2: 8;
- unsigned lut1: 8;
- unsigned lut0: 8;
-} plio_extctl_t;
-
-typedef struct {
- plio_grpsel_t grpsel[4];
- u16_t cv[16];
- plio_cs_lut_t cs_lut[4];
- plio_extctl_t extctl_o_lut[8];
-} plio_pfsm_t;
-
-typedef struct {
- u32_t odr_oe_sel;
- u32_t odr_oe;
- u32_t cmp;
- u32_t ncmp;
- u32_t cmp_mask;
-} plio_edif_t;
-
-typedef enum {
- PLIO_ECIF_CLK_OUT = 9,
- PLIO_ECIF_IALD = 9,
- PLIO_ECIF_CLK_IN = 8,
- PLIO_ECIF_IDLD = 8,
- PLIO_ECIF_INT = 2,
-} plio_ecif_output_t;
-
-typedef struct {
- u32_t bypass_sync;
- u32_t ift;
- u32_t output_type;
- u32_t output_ena;
- u32_t output_lvl;
-} plio_ecif_t;
-
-typedef struct {
- u32_t idr_addr_pos_mask;
- u32_t reserved;
- u32_t lreg_bar;
-} plio_dcod_t;
-
-typedef struct {
- u32_t addr_rd_ena;
- u32_t addr_wr_ena;
- u32_t addr_rd_int_ena;
- u32_t addr_wr_int_ena;
-} plio_lcfg_t;
-
-
-/*
- * PLIO configuration
- */
-typedef struct {
- plio_fctl0_t fctl0;
- plio_fctl1_t fctl1;
- plio_fctl2_t fctl2;
-} plio_fctl_t;
-
-typedef struct {
- plio_pfsm_t pfsm;
- plio_edif_t edif;
- plio_ecif_t ecif;
- plio_dcod_t dcod;
- plio_lcfg_t lcfg;
-} plio_config_t;
-
-typedef struct {
- plio_io_function_t function;
- plio_gpio_t gpio_ctl;
- plio_gpio_t gpio_out;
- plio_gpio_t gpio_in;
- plio_intstat_t intstat;
- plio_intstat_t intmask;
- plio_intset_t intset;
- plio_intstat_t intclr;
- unsigned tx_lo;
- unsigned tx_hi;
- unsigned rx_lo;
- unsigned rx_hi;
- plio_fctl0_t fctl0;
- plio_fctl1_t fctl1;
- plio_fctl2_t fctl2;
- plio_stat_0_t stat0;
- plio_stat_1_t stat1;
- plio_stat_2_t stat2;
- plio_io_fifo_wm_t fifo_wm;
- plio_io_fifo_lvl_t fifo_lvl;
-} plio_nbr_t;
-
-typedef struct {
- u32_t pfsm_sram[256];
- plio_config_t config;
-} plio_br_t;
-
-#define PLIO_NBR ((plio_nbr_t *)(PLIO_PORT))
-#define PLIO_BR ((plio_br_t *)((PLIO_PORT + IO_PORT_BR_OFFSET)))
-#define PEXT_NBR ((plio_nbr_t *)(PLIO_EXT_PORT))
-
-extern void plio_init(const plio_fctl_t *plio_fctl, const plio_config_t *plio_config, const plio_sram_t plio_sram_cfg[], int sram_cfg_size);
-
-#endif // __PLIO__H__
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/poll.h
- * Ubicom32 specific poll() related flags definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_POLL_H
-#define _ASM_UBICOM32_POLL_H
-
-#define POLLWRNORM POLLOUT
-#define POLLWRBAND 0x0100
-
-#include <asm-generic/poll.h>
-
-#endif /* _ASM_UBICOM32_POLL_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/posix_types.h
- * Ubicom32 architecture posix types.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 2004 Microtronix Datacom Ltd
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef __ARCH_UBICOM32_POSIX_TYPES_H
-#define __ARCH_UBICOM32_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long __kernel_ino_t;
-typedef unsigned short __kernel_mode_t;
-typedef unsigned short __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
-typedef unsigned short __kernel_ipc_pid_t;
-typedef unsigned short __kernel_uid_t;
-typedef unsigned short __kernel_gid_t;
-typedef unsigned int __kernel_size_t;
-typedef int __kernel_ssize_t;
-typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_timer_t;
-typedef int __kernel_clockid_t;
-typedef int __kernel_daddr_t;
-typedef char * __kernel_caddr_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
-
-typedef unsigned short __kernel_old_uid_t;
-typedef unsigned short __kernel_old_gid_t;
-typedef unsigned short __kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
- int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef __FD_SET
-#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-
-#undef __FD_CLR
-#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-
-#undef __FD_ISSET
-#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
-
-#undef __FD_ZERO
-#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
-
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
-
-#endif
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/processor.h
- * Thread related definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 1995 Hamish Macdonald
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#ifndef _ASM_UBICOM32_PROCESSOR_H
-#define _ASM_UBICOM32_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/compiler.h>
-#include <linux/threads.h>
-#include <asm/types.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-#include <asm/current.h>
-#include <asm/thread_info.h>
-
-#if defined(CONFIG_UBICOM32_V3)
- #define CPU "IP5K"
-#endif
-#if defined(CONFIG_UBICOM32_V4)
- #define CPU "IP7K"
-#endif
-#ifndef CPU
- #define CPU "UNKNOWN"
-#endif
-
-/*
- * User space process size: 1st byte beyond user address space.
- */
-extern unsigned long memory_end;
-#define TASK_SIZE (memory_end)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's. We won't be using it
- */
-#define TASK_UNMAPPED_BASE 0
-
-/*
- * This is the structure where we are going to save callee-saved registers.
- * A5 is the return address, A7 is the stack pointer, A6 is the frame
- * pointer. This is the frame that is created because of switch_to. This
- * is not the frame due to interrupt preemption or because of syscall entry.
- */
-
-struct thread_struct {
- unsigned long d10; /* D10 */
- unsigned long d11; /* D11 */
- unsigned long d12; /* D12 */
- unsigned long d13; /* D13 */
- unsigned long a1; /* A1 */
- unsigned long a2; /* A2 */
- unsigned long a5; /* A5 return address. */
- unsigned long a6; /* A6 */
- unsigned long sp; /* A7 kernel stack pointer. */
-};
-
-#define INIT_THREAD { \
- 0, 0, 0, 0, 0, 0, 0, 0, \
- sizeof(init_stack) + (unsigned long) init_stack - 8, \
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- *
- * pass the data segment into user programs if it exists,
- * it can't hurt anything as far as I can tell
- */
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-#define start_thread(regs, new_pc, new_sp) \
- do { \
- regs->pc = new_pc & ~3; \
- regs->an[5] = new_pc & ~3; \
- regs->an[7] = new_sp; \
- regs->nesting_level = -1; \
- regs->frame_type = UBICOM32_FRAME_TYPE_NEW_THREAD; \
- regs->thread_type = NORMAL_THREAD; \
- } while(0)
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk) do { } while (0)
-
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-unsigned long thread_saved_pc(struct task_struct *tsk);
-unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk) (tsk->thread.a5)
-#define KSTK_ESP(tsk) (tsk->thread.sp)
-
-#define cpu_relax() barrier()
-
-extern void processor_init(void);
-extern unsigned int processor_timers(void);
-extern unsigned int processor_threads(void);
-extern unsigned int processor_frequency(void);
-extern int processor_interrupts(unsigned int *int0, unsigned int *int1);
-extern void processor_ocm(unsigned long *socm, unsigned long *eocm);
-extern void processor_dram(unsigned long *sdram, unsigned long *edram);
-
-#define THREAD_SIZE_LONGS (THREAD_SIZE/sizeof(unsigned long))
-#define KSTK_TOP(info) \
-({ \
- unsigned long *__ptr = (unsigned long *)(info); \
- (unsigned long)(&__ptr[THREAD_SIZE_LONGS]); \
-})
-
-#define task_pt_regs(task) \
-({ \
- struct pt_regs *__regs__; \
- __regs__ = (struct pt_regs *)(KSTK_TOP(task_stack_page(task))-8); \
- __regs__ - 1; \
-})
-
-#endif /* _ASM_UBICOM32_PROCESSOR_H */
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/profile.h
- * Private data for the profile module
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- */
-
-
-#ifndef _PROFILESAMPLE_H_
-#define _PROFILESAMPLE_H_
-
-/*
- * a sample taken by the ipProfile package for sending to the profilertool
- */
-struct profile_sample {
- unsigned int pc; /* PC value */
- unsigned int a5; /* a5 contents for parent of leaf function */
- unsigned int parent; /* return address from stack, to find the caller */
- unsigned int latency; /* CPU clocks since the last message dispatch in this thread (thread 0 ony for now) */
- unsigned short active; /* which threads are active - for accurate counting */
- unsigned short d_blocked; /* which threads are blocked due to D cache misses */
- unsigned short i_blocked; /* which threads are blocked due to I cache misses */
- unsigned char cond_codes; /* for branch prediction */
- unsigned char thread; /* I-blocked, D-blocked, 4-bit thread number */
-};
-
-#endif
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ptrace.h
- * Ubicom32 architecture ptrace support.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_PTRACE_H
-#define _ASM_UBICOM32_PTRACE_H
-
-#ifndef __ASSEMBLY__
-
-/*
- * We use hard coded constants because this is shared with user
- * space and the values are NOT allowed to change. Only fields
- * that are intended to be exposed get values.
- */
-#define PT_D0 0
-#define PT_D1 4
-#define PT_D2 8
-#define PT_D3 12
-#define PT_D4 16
-#define PT_D5 20
-#define PT_D6 24
-#define PT_D7 28
-#define PT_D8 32
-#define PT_D9 36
-#define PT_D10 40
-#define PT_D11 44
-#define PT_D12 48
-#define PT_D13 52
-#define PT_D14 56
-#define PT_D15 60
-#define PT_A0 64
-#define PT_A1 68
-#define PT_A2 72
-#define PT_A3 76
-#define PT_A4 80
-#define PT_A5 84
-#define PT_A6 88
-#define PT_A7 92
-#define PT_SP 92
-#define PT_ACC0HI 96
-#define PT_ACC0LO 100
-#define PT_MAC_RC16 104
-#define PT_ACC1HI 108
-#define PT_ACC1LO 112
-#define PT_SOURCE3 116
-#define PT_INST_CNT 120
-#define PT_CSR 124
-#define PT_DUMMY_UNUSED 128
-#define PT_INT_MASK0 132
-#define PT_INT_MASK1 136
-#define PT_TRAP_CAUSE 140
-#define PT_PC 144
-#define PT_ORIGINAL_D0 148
-#define PT_FRAME_TYPE 152
-
-/*
- * The following 'registers' are not registers at all but are used
- * locate the relocated sections.
- */
-#define PT_TEXT_ADDR 200
-#define PT_TEXT_END_ADDR 204
-#define PT_DATA_ADDR 208
-#define PT_EXEC_FDPIC_LOADMAP 212
-#define PT_INTERP_FDPIC_LOADMAP 216
-
-/*
- * This struct defines the way the registers are stored on the
- * stack during a system call.
- */
-enum thread_type {
- NORMAL_THREAD,
- KERNEL_THREAD,
-};
-
-#define UBICOM32_FRAME_TYPE_SYSCALL -1 /* System call frame */
-#define UBICOM32_FRAME_TYPE_INVALID 0 /* Invalid frame, no longer in use */
-#define UBICOM32_FRAME_TYPE_INTERRUPT 1 /* Interrupt frame */
-#define UBICOM32_FRAME_TYPE_TRAP 2 /* Trap frame */
-#define UBICOM32_FRAME_TYPE_SIGTRAMP 3 /* Signal trampoline frame. */
-#define UBICOM32_FRAME_TYPE_NEW_THREAD 4 /* New Thread. */
-
-struct pt_regs {
- /*
- * Data Registers
- */
- unsigned long dn[16];
-
- /*
- * Address Registers
- */
- unsigned long an[8];
-
- /*
- * Per thread misc registers.
- */
- unsigned long acc0[2];
- unsigned long mac_rc16;
- unsigned long acc1[2];
- unsigned long source3;
- unsigned long inst_cnt;
- unsigned long csr;
- unsigned long dummy_unused;
- unsigned long int_mask0;
- unsigned long int_mask1;
- unsigned long trap_cause;
- unsigned long pc;
- unsigned long original_dn_0;
-
- /*
- * Frame type. Syscall frames are -1. For other types look above.
- */
- unsigned long frame_type;
-
- /*
- * These fields are not exposed to ptrace.
- */
- unsigned long previous_pc;
- long nesting_level; /* When the kernel in in user space this
- * will be -1. */
- unsigned long thread_type; /* This indicates if this is a kernel
- * thread. */
-};
-
-/*
- * This is the extended stack used by signal handlers and the context
- * switcher: it's pushed after the normal "struct pt_regs".
- */
-struct switch_stack {
- unsigned long dummy;
-};
-
-#ifdef __KERNEL__
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-
-#ifndef PS_S
-#define PS_S (0x2000)
-#define PS_M (0x1000)
-#endif
-
-extern int __user_mode(unsigned long sp);
-
-#define user_mode(regs) (__user_mode((regs->an[7])))
-#define user_stack(regs) ((regs)->an[7])
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-extern void show_regs(struct pt_regs *);
-#endif /* __KERNEL__ */
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_UBICOM32_PTRACE_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/range-protect-asm.h
- * Assembly macros for enabling memory protection.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#ifndef _ASM_UBICOM32_RANGE_PROTECT_ASM_H
-#define _ASM_UBICOM32_RANGE_PROTECT_ASM_H
-
-#if defined(__ASSEMBLY__)
-
-#include <asm/thread-asm.h>
-
-/*
- * You should only use the enable/disable ranges when you have the atomic lock,
- * if you do not there will be problems.
- */
-
-/*
- * enable_kernel_ranges
- * Enable the kernel ranges (disabling protection) for thread,
- * where thread == (1 << thread number)
- */
-.macro enable_kernel_ranges thread
-#ifdef CONFIG_PROTECT_KERNEL
- or.4 I_RANGE0_EN, I_RANGE0_EN, \thread /* Enable Range Register */
- or.4 D_RANGE0_EN, D_RANGE0_EN, \thread
- or.4 D_RANGE1_EN, D_RANGE1_EN, \thread
-#endif
-.endm
-
-/*
- * enable_kernel_ranges_for_current
- * Enable the kernel ranges (disabling protection) for this thread
- */
-.macro enable_kernel_ranges_for_current scratch_reg
-#ifdef CONFIG_PROTECT_KERNEL
- thread_get_self_mask \scratch_reg
- enable_kernel_ranges \scratch_reg
-#endif
-.endm
-
-/*
- * disable_kernel_ranges
- * Disables the kernel ranges (enabling protection) for thread
- * where thread == (1 << thread number)
- */
-.macro disable_kernel_ranges thread
-#ifdef CONFIG_PROTECT_KERNEL
- not.4 \thread, \thread
- and.4 I_RANGE0_EN, I_RANGE0_EN, \thread /* Disable Range Register */
- and.4 D_RANGE0_EN, D_RANGE0_EN, \thread
- and.4 D_RANGE1_EN, D_RANGE1_EN, \thread
-#endif
-.endm
-
-/*
- * disable_kernel_ranges_for_current
- * Disable kernel ranges (enabling protection) for this thread
- */
-.macro disable_kernel_ranges_for_current scratch_reg
-#ifdef CONFIG_PROTECT_KERNEL
- thread_get_self_mask \scratch_reg
- disable_kernel_ranges \scratch_reg
-#endif
-.endm
-#endif
-
-#endif /* _ASM_UBICOM32_RANGE_PROTECT_ASM_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/range-protect.h
- * Assembly macros declared in C for enabling memory protection.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#ifndef _ASM_UBICOM32_RANGE_PROTECT_H
-#define _ASM_UBICOM32_RANGE_PROTECT_H
-
-#if !defined(__ASSEMBLY__)
-#include <asm/thread.h>
-/*
- * The following macros should be the identical to the ones in
- * range-protect-asm.h
- *
- * You should only use the enable/disable ranges when you have the atomic lock,
- * if you do not there will be problems.
- */
-
-/*
- * enable_kernel_ranges
- * Enable the kernel ranges (disabling protection) for thread,
- * where thread == (1 << thread number)
- */
-asm (
- ".macro enable_kernel_ranges thread \n\t"
-#ifdef CONFIG_PROTECT_KERNEL
- " or.4 I_RANGE0_EN, I_RANGE0_EN, \\thread \n\t" /* Enable Range Register */
- " or.4 D_RANGE0_EN, D_RANGE0_EN, \\thread \n\t"
- " or.4 D_RANGE1_EN, D_RANGE1_EN, \\thread \n\t"
-#endif
- ".endm \n\t"
-);
-
-#else /* __ASSEMBLY__ */
-
-#include <asm/range-protect-asm.h>
-
-#endif
-#endif /* _ASM_UBICOM32_RANGE_PROTECT_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/resource.h
- * Generic definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_RESOURCE_H
-#define _ASM_UBICOM32_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* _ASM_UBICOM32_RESOURCE_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ring_tio.h
- * Ubicom32 architecture Ring TIO definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-#ifndef _ASM_UBICOM32_RING_TIO_H
-#define _ASM_UBICOM32_RING_TIO_H
-
-#include <asm/devtree.h>
-
-#define RING_TIO_NODE_VERSION 2
-
-/*
- * Devtree node for ring
- */
-struct ring_tio_node {
- struct devtree_node dn;
-
- u32_t version;
- void *regs;
-};
-
-extern void ring_tio_init(const char *node_name);
-
-#endif /* _ASM_UBICOM32_RING_TIO_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/scatterlist.h
- * Definitions of struct scatterlist for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SCATTERLIST_H
-#define _ASM_UBICOM32_SCATTERLIST_H
-
-#include <linux/mm.h>
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
- dma_addr_t dma_address;
- unsigned int length;
-};
-
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
-
-#define ISA_DMA_THRESHOLD (0xffffffff)
-
-#endif /* _ASM_UBICOM32_SCATTERLIST_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/sd_tio.h
- * SD TIO definitions
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-#ifndef _ASM_UBICOM32_SD_TIO_H
-#define _ASM_UBICOM32_SD_TIO_H
-
-#include <asm/devtree.h>
-
-/*
- * Devtree node for SD
- */
-struct sd_tio_node {
- struct devtree_node dn;
- void *regs;
-};
-
-#endif /* _ASM_UBICOM32_SD_TIO_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/sections.h
- * Generic sections.h definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SECTIONS_H
-#define _ASM_UBICOM32_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-#endif /* _ASM_UBICOM32_SECTIONS_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/segment.h
- * Memory segment definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SEGMENT_H
-#define _ASM_UBICOM32_SEGMENT_H
-
-/* define constants */
-/* Address spaces (FC0-FC2) */
-#define USER_DATA (1)
-#ifndef __USER_DS
-#define __USER_DS (USER_DATA)
-#endif
-#define USER_PROGRAM (2)
-#define SUPER_DATA (5)
-#ifndef __KERNEL_DS
-#define __KERNEL_DS (SUPER_DATA)
-#endif
-#define SUPER_PROGRAM (6)
-#define CPU_SPACE (7)
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
- unsigned long seg;
-} mm_segment_t;
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-#define USER_DS MAKE_MM_SEG(__USER_DS)
-#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
-
-/*
- * Get/set the SFC/DFC registers for MOVES instructions
- */
-
-static inline mm_segment_t get_fs(void)
-{
- return USER_DS;
-}
-
-static inline mm_segment_t get_ds(void)
-{
- /* return the supervisor data space code */
- return KERNEL_DS;
-}
-
-static inline void set_fs(mm_segment_t val)
-{
-}
-
-#define segment_eq(a,b) ((a).seg == (b).seg)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_UBICOM32_SEGMENT_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/semaphore-helper.h
- * Semaphore related definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SEMAPHORE_HELPER_H
-#define _ASM_UBICOM32_SEMAPHORE_HELPER_H
-
-/*
- * SMP- and interrupt-safe semaphores helper functions.
- *
- * (C) Copyright 1996 Linus Torvalds
- *
- * m68k version by Andreas Schwab
- */
-
-
-/*
- * These two _must_ execute atomically wrt each other.
- */
-static inline void wake_one_more(struct semaphore * sem)
-{
- atomic_inc(&sem->waking);
-}
-
-static inline int waking_non_zero(struct semaphore *sem)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- ret = 0;
- if (atomic_read(&sem->waking) > 0) {
- atomic_dec(&sem->waking);
- ret = 1;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-/*
- * waking_non_zero_interruptible:
- * 1 got the lock
- * 0 go to sleep
- * -EINTR interrupted
- */
-static inline int waking_non_zero_interruptible(struct semaphore *sem,
- struct task_struct *tsk)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- ret = 0;
- if (atomic_read(&sem->waking) > 0) {
- atomic_dec(&sem->waking);
- ret = 1;
- } else if (signal_pending(tsk)) {
- atomic_inc(&sem->count);
- ret = -EINTR;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-/*
- * waking_non_zero_trylock:
- * 1 failed to lock
- * 0 got the lock
- */
-static inline int waking_non_zero_trylock(struct semaphore *sem)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- ret = 1;
- if (atomic_read(&sem->waking) > 0) {
- atomic_dec(&sem->waking);
- ret = 0;
- } else
- atomic_inc(&sem->count);
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-#endif /* _ASM_UBICOM32_SEMAPHORE_HELPER_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/semaphore.h
- * Interrupt-safe semaphores for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * (C) Copyright 1996 Linus Torvalds
- * m68k version by Andreas Schwab
- * Copyright (C) 2004 Microtronix Datacom Ltd
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SEMAPHORE_H
-#define _ASM_UBICOM32_SEMAPHORE_H
-
-#define RW_LOCK_BIAS 0x01000000
-
-#ifndef __ASSEMBLY__
-
-#include <linux/linkage.h>
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <linux/rwsem.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-
-struct semaphore {
- atomic_t count;
- atomic_t waking;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .count = ATOMIC_INIT(n), \
- .waking = ATOMIC_INIT(0), \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
- *sem = (struct semaphore)__SEMAPHORE_INITIALIZER(*sem, val);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-asmlinkage void __down_failed(void /* special register calling convention */);
-asmlinkage int __down_failed_interruptible(void /* params in registers */);
-asmlinkage int __down_failed_trylock(void /* params in registers */);
-asmlinkage void __up_wakeup(void /* special register calling convention */);
-
-asmlinkage void __down(struct semaphore * sem);
-asmlinkage int __down_interruptible(struct semaphore * sem);
-asmlinkage int __down_trylock(struct semaphore * sem);
-asmlinkage void __up(struct semaphore * sem);
-
-extern spinlock_t semaphore_wake_lock;
-
-/*
- * This is ugly, but we want the default case to fall through.
- * "down_failed" is a special asm handler that calls the C
- * routine that actually waits.
- */
-static inline void down(struct semaphore * sem)
-{
- might_sleep();
-
- if (atomic_dec_return(&sem->count) < 0)
- __down(sem);
-}
-
-static inline int down_interruptible(struct semaphore * sem)
-{
- int ret = 0;
-
-
- might_sleep();
-
- if(atomic_dec_return(&sem->count) < 0)
- ret = __down_interruptible(sem);
- return ret;
-}
-
-static inline int down_trylock(struct semaphore * sem)
-{
- int ret = 0;
-
- if (atomic_dec_return (&sem->count) < 0)
- ret = __down_trylock(sem);
- return ret;
-}
-
-/*
- * Note! This is subtle. We jump to wake people up only if
- * the semaphore was negative (== somebody was waiting on it).
- * The default case (no contention) will result in NO
- * jumps for both down() and up().
- */
-static inline void up(struct semaphore * sem)
-{
- if (atomic_inc_return(&sem->count) <= 0)
- __up(sem);
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_UBICOM32_SEMAPHORE_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/sembuf.h
- * The semid64_ds structure for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SEMBUF_H
-#define _ASM_UBICOM32_SEMBUF_H
-
-/*
- * The semid64_ds structure for ubicom32 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
- struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
- __kernel_time_t sem_otime; /* last semop time */
- unsigned long __unused1;
- __kernel_time_t sem_ctime; /* last change time */
- unsigned long __unused2;
- unsigned long sem_nsems; /* no. of semaphores in array */
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _ASM_UBICOM32_SEMBUF_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/setup.h
- * Kernel command line length definition.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 2004, Microtronix Datacom Ltd., All rights reserved.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#ifndef _ASM_UBICOM32_SETUP_H
-#define _ASM_UBICOM32_SETUP_H
-
-#define COMMAND_LINE_SIZE 512
-
-#endif /* _ASM_UBICOM32_SETUP_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/shmbuf.h
- * The shmid64_ds structure for the Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SHMBUF_H
-#define _ASM_UBICOM32_SHMBUF_H
-
-/*
- * The shmid64_ds structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
- struct ipc64_perm shm_perm; /* operation perms */
- size_t shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
- unsigned long __unused1;
- __kernel_time_t shm_dtime; /* last detach time */
- unsigned long __unused2;
- __kernel_time_t shm_ctime; /* last change time */
- unsigned long __unused3;
- __kernel_pid_t shm_cpid; /* pid of creator */
- __kernel_pid_t shm_lpid; /* pid of last operator */
- unsigned long shm_nattch; /* no. of current attaches */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct shminfo64 {
- unsigned long shmmax;
- unsigned long shmmin;
- unsigned long shmmni;
- unsigned long shmseg;
- unsigned long shmall;
- unsigned long __unused1;
- unsigned long __unused2;
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _ASM_UBICOM32_SHMBUF_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/shmparam.h
- * Shared memory definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 2004 Microtronix Datacom Ltd
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- * Alpha, ix86, M68K, Sparc, ...et al
- */
-#ifndef _ASM_UBICOM32_SHMPARAM_H
-#define _ASM_UBICOM32_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* _ASM_UBICOM32_SHMPARAM_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/sigcontext.h
- * Definition of sigcontext struct for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SIGCONTEXT_H
-#define _ASM_UBICOM32_SIGCONTEXT_H
-
-#include <asm/ptrace.h>
-
-struct sigcontext {
- struct pt_regs sc_regs;
-};
-
-#endif /* _ASM_UBICOM32_SIGCONTEXT_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/siginfo.h
- * Generic siginfo.h definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SIGINFO_H
-#define _ASM_UBICOM32_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif /* _ASM_UBICOM32_SIGINFO_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/signal.h
- * Signal related definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SIGNAL_H
-#define _ASM_UBICOM32_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
- is taken to make libc match. */
-
-#define _NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-#include <linux/version.h>
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
-#include <asm-generic/signal-defs.h>
-#else
-#include <asm-generic/signal.h>
-#endif
-
-#ifdef __KERNEL__
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-#define sa_handler _u._sa_handler
-#define sa_sigaction _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_UBICOM32_SIGNAL_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/smp.h
- * SMP definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SMP_H
-#define _ASM_UBICOM32_SMP_H
-
-#ifndef CONFIG_SMP
-#error you should not include smp.h if smp is off
-#endif
-
-#ifndef ASSEMBLY
-#include <linux/bitops.h>
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <asm/ip5000.h>
-
-typedef unsigned long address_t;
-extern unsigned int smp_ipi_irq;
-
-/*
- * This magic constant controls our willingness to transfer
- * a process across CPUs.
- *
- * Such a transfer incurs cache and tlb
- * misses. The current value is inherited from i386. Still needs
- * to be tuned for parisc.
- */
-#define PROC_CHANGE_PENALTY 15 /* Schedule penalty */
-#define NO_PROC_ID 0xFF /* No processor magic marker */
-#define ANY_PROC_ID 0xFF /* Any processor magic marker */
-
-#ifdef CONFIG_SMP
-#define raw_smp_processor_id() (current_thread_info()->cpu)
-#endif /* CONFIG_SMP */
-
-static inline int __cpu_disable (void)
-{
- return 0;
-}
-
-static inline void __cpu_die (unsigned int cpu)
-{
- while(1) {
- };
-}
-
-extern int __cpu_up(unsigned int cpu);
-extern void smp_send_timer_all(void);
-extern void smp_timer_broadcast(const struct cpumask *mask);
-extern void smp_set_affinity(unsigned int irq, const struct cpumask *dest);
-extern void arch_send_call_function_single_ipi(int cpu);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
-extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-
-/*
- * TODO: Once these are fully tested, we should turn them into
- * inline macros for performance.
- */
-extern unsigned long smp_get_affinity(unsigned int irq, int *all);
-extern void smp_reset_ipi(unsigned long mask);
-
-#endif /* !ASSEMBLY */
-#endif /* _ASM_UBICOM32_SMP_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/socket.h
- * Socket options definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SOCKET_H
-#define _ASM_UBICOM32_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET 1
-
-#define SO_DEBUG 1
-#define SO_REUSEADDR 2
-#define SO_TYPE 3
-#define SO_ERROR 4
-#define SO_DONTROUTE 5
-#define SO_BROADCAST 6
-#define SO_SNDBUF 7
-#define SO_RCVBUF 8
-#define SO_SNDBUFFORCE 32
-#define SO_RCVBUFFORCE 33
-#define SO_KEEPALIVE 9
-#define SO_OOBINLINE 10
-#define SO_NO_CHECK 11
-#define SO_PRIORITY 12
-#define SO_LINGER 13
-#define SO_BSDCOMPAT 14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED 16
-#define SO_PEERCRED 17
-#define SO_RCVLOWAT 18
-#define SO_SNDLOWAT 19
-#define SO_RCVTIMEO 20
-#define SO_SNDTIMEO 21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION 22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-#define SO_SECURITY_ENCRYPTION_NETWORK 24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER 26
-#define SO_DETACH_FILTER 27
-
-#define SO_PEERNAME 28
-#define SO_TIMESTAMP 29
-#define SCM_TIMESTAMP SO_TIMESTAMP
-
-#define SO_ACCEPTCONN 30
-
-#define SO_PEERSEC 31
-#define SO_PASSSEC 34
-#define SO_TIMESTAMPNS 35
-#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-
-#define SO_MARK 36
-
-#define SO_TIMESTAMPING 37
-#define SCM_TIMESTAMPING SO_TIMESTAMPING
-
-#define SO_PROTOCOL 38
-#define SO_DOMAIN 39
-
-#endif /* _ASM_UBICOM32_SOCKET_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/sockios.h
- * Socket-level ioctl definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SOCKIOS_H
-#define _ASM_UBICOM32_SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 0x8901
-#define SIOCSPGRP 0x8902
-#define FIOGETOWN 0x8903
-#define SIOCGPGRP 0x8904
-#define SIOCATMARK 0x8905
-#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
-#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
-
-#endif /* _ASM_UBICOM32_SOCKIOS_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/spinlock.h
- * Spinlock related definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SPINLOCK_H
-#define _ASM_UBICOM32_SPINLOCK_H
-
-#include <asm/system.h>
-#include <asm/processor.h>
-#include <asm/spinlock_types.h>
-
-/*
- * __raw_spin_lock()
- * Lock the lock.
- */
-static inline void __raw_spin_lock(raw_spinlock_t *x)
-{
- asm volatile (
- "1: bset %0, %0, #0 \n\t"
- " jmpne.f 1b \n\t"
- : "+U4" (x->lock)
- :
- : "memory", "cc"
- );
-}
-
-/*
- * __raw_spin_unlock()
- * Unlock the lock.
- */
-static inline void __raw_spin_unlock(raw_spinlock_t *x)
-{
- asm volatile (
- " bclr %0, %0, #0 \n\t"
- : "+U4" (x->lock)
- :
- : "memory", "cc"
- );
-}
-
-/*
- * __raw_spin_is_locked()
- * Test if the lock is locked.
- */
-static inline int __raw_spin_is_locked(raw_spinlock_t *x)
-{
- return x->lock;
-}
-
-/*
- * __raw_spin_unlock_wait()
- * Wait for the lock to be unlocked.
- *
- * Note: the caller has not guarantee that the lock will not
- * be acquired before they get to it.
- */
-static inline void __raw_spin_unlock_wait(raw_spinlock_t *x)
-{
- do {
- cpu_relax();
- } while (__raw_spin_is_locked(x));
-}
-
-/*
- * __raw_spin_trylock()
- * Try the lock, return 0 on failure, 1 on success.
- */
-static inline int __raw_spin_trylock(raw_spinlock_t *x)
-{
- int ret = 0;
-
- asm volatile (
- " bset %1, %1, #0 \n\t"
- " jmpne.f 1f \n\t"
- " move.4 %0, #1 \n\t"
- "1: \n\t"
- : "+r" (ret), "+U4" (x->lock)
- :
- : "memory", "cc"
- );
-
- return ret;
-}
-
-/*
- * __raw_spin_lock_flags()
- * Spin waiting for the lock (enabling IRQ(s))
- */
-static inline void __raw_spin_lock_flags(raw_spinlock_t *x, unsigned long flags)
-{
- mb();
- while (!__raw_spin_trylock(x)) {
- /*
- * If the flags from the IRQ are set, interrupts are disabled and we
- * need to re-enable them.
- */
- if (!flags) {
- cpu_relax();
- } else {
- raw_local_irq_enable();
- cpu_relax();
- raw_local_irq_disable();
- }
- }
- mb();
-}
-
-/*
- * Read-write spinlocks, allowing multiple readers but only one writer.
- * Linux rwlocks are unfair to writers; they can be starved for an indefinite
- * time by readers. With care, they can also be taken in interrupt context.
- *
- * In Ubicom32 architecture implementation, we have a spinlock and a counter.
- * Readers use the lock to serialise their access to the counter (which
- * records how many readers currently hold the lock).
- * Writers hold the spinlock, preventing any readers or other writers from
- * grabbing the rwlock.
- */
-
-/*
- * __raw_read_lock()
- * Increment the counter in the rwlock.
- *
- * Note that we have to ensure interrupts are disabled in case we're
- * interrupted by some other code that wants to grab the same read lock
- */
-static inline void __raw_read_lock(raw_rwlock_t *rw)
-{
- unsigned long flags;
- raw_local_irq_save(flags);
- __raw_spin_lock_flags(&rw->lock, flags);
- rw->counter++;
- __raw_spin_unlock(&rw->lock);
- raw_local_irq_restore(flags);
-}
-
-/*
- * __raw_read_unlock()
- * Decrement the counter.
- *
- * Note that we have to ensure interrupts are disabled in case we're
- * interrupted by some other code that wants to grab the same read lock
- */
-static inline void __raw_read_unlock(raw_rwlock_t *rw)
-{
- unsigned long flags;
- raw_local_irq_save(flags);
- __raw_spin_lock_flags(&rw->lock, flags);
- rw->counter--;
- __raw_spin_unlock(&rw->lock);
- raw_local_irq_restore(flags);
-}
-
-/*
- * __raw_read_trylock()
- * Increment the counter if we can.
- *
- * Note that we have to ensure interrupts are disabled in case we're
- * interrupted by some other code that wants to grab the same read lock
- */
-static inline int __raw_read_trylock(raw_rwlock_t *rw)
-{
- unsigned long flags;
- retry:
- raw_local_irq_save(flags);
- if (__raw_spin_trylock(&rw->lock)) {
- rw->counter++;
- __raw_spin_unlock(&rw->lock);
- raw_local_irq_restore(flags);
- return 1;
- }
-
- raw_local_irq_restore(flags);
-
- /*
- * If write-locked, we fail to acquire the lock
- */
- if (rw->counter < 0) {
- return 0;
- }
-
- /*
- * Wait until we have a realistic chance at the lock
- */
- while (__raw_spin_is_locked(&rw->lock) && rw->counter >= 0) {
- cpu_relax();
- }
-
- goto retry;
-}
-
-/*
- * __raw_write_lock()
- *
- * Note that we have to ensure interrupts are disabled in case we're
- * interrupted by some other code that wants to read_trylock() this lock
- */
-static inline void __raw_write_lock(raw_rwlock_t *rw)
-{
- unsigned long flags;
-retry:
- raw_local_irq_save(flags);
- __raw_spin_lock_flags(&rw->lock, flags);
-
- if (rw->counter != 0) {
- __raw_spin_unlock(&rw->lock);
- raw_local_irq_restore(flags);
-
- while (rw->counter != 0)
- cpu_relax();
-
- goto retry;
- }
-
- rw->counter = -1; /* mark as write-locked */
- mb();
- raw_local_irq_restore(flags);
-}
-
-static inline void __raw_write_unlock(raw_rwlock_t *rw)
-{
- rw->counter = 0;
- __raw_spin_unlock(&rw->lock);
-}
-
-/* Note that we have to ensure interrupts are disabled in case we're
- * interrupted by some other code that wants to read_trylock() this lock */
-static inline int __raw_write_trylock(raw_rwlock_t *rw)
-{
- unsigned long flags;
- int result = 0;
-
- raw_local_irq_save(flags);
- if (__raw_spin_trylock(&rw->lock)) {
- if (rw->counter == 0) {
- rw->counter = -1;
- result = 1;
- } else {
- /* Read-locked. Oh well. */
- __raw_spin_unlock(&rw->lock);
- }
- }
- raw_local_irq_restore(flags);
-
- return result;
-}
-
-/*
- * read_can_lock - would read_trylock() succeed?
- * @lock: the rwlock in question.
- */
-static inline int __raw_read_can_lock(raw_rwlock_t *rw)
-{
- return rw->counter >= 0;
-}
-
-/*
- * write_can_lock - would write_trylock() succeed?
- * @lock: the rwlock in question.
- */
-static inline int __raw_write_can_lock(raw_rwlock_t *rw)
-{
- return !rw->counter;
-}
-
-#define __raw_read_lock_flags(lock, flags) __raw_read_lock(lock)
-#define __raw_write_lock_flags(lock, flags) __raw_write_lock(lock)
-
-#define _raw_spin_relax(lock) cpu_relax()
-#define _raw_read_relax(lock) cpu_relax()
-#define _raw_write_relax(lock) cpu_relax()
-
-#endif /* _ASM_UBICOM32_SPINLOCK_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/spinlock_types.h
- * Spinlock related structure definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SPINLOCK_TYPES_H
-#define _ASM_UBICOM32_SPINLOCK_TYPES_H
-
-typedef struct {
- volatile unsigned int lock;
-} raw_spinlock_t;
-
-typedef struct {
- raw_spinlock_t lock;
- volatile int counter;
-} raw_rwlock_t;
-
-#define __RAW_SPIN_LOCK_UNLOCKED { 0 }
-#define __RAW_RW_LOCK_UNLOCKED { __RAW_SPIN_LOCK_UNLOCKED, 0 }
-
-#endif /* _ASM_UBICOM32_SPINLOCK_TYPES_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/stacktrace.h
- * Stacktrace functions for the Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_STACKTRACE_H
-#define _ASM_UBICOM32_STACKTRACE_H
-
-#define between(a, b, c) (( \
- ((unsigned long) a) >= ((unsigned long) b)) && \
- (((unsigned long)a) <= ((unsigned long)c)))
-
-/*
- * These symbols are filled in by the linker.
- */
-extern unsigned long _stext;
-extern unsigned long _etext;
-
-/* OCM text goes from __ocm_text_run_begin to __data_begin */
-extern unsigned long __ocm_text_run_begin;
-extern unsigned long __data_begin;
-
-/* Account for OCM case - see stacktrace.c maybe combine(also trap.c) */
-/*
- * ubicom32_is_kernel()
- *
- * Check to see if the given address belongs to the kernel.
- * NOMMU does not permit any other means.
- */
-static inline int ubicom32_is_kernel(unsigned long addr)
-{
- int is_kernel = between(addr, &_stext, &_etext) || \
- between(addr, &__ocm_text_run_begin, &__data_begin);
-
-#ifdef CONFIG_MODULES
- if (!is_kernel)
- is_kernel = is_module_address(addr);
-#endif
- return is_kernel;
-}
-
-extern unsigned long stacktrace_iterate(
- unsigned long **trace,
- unsigned long stext, unsigned long etext,
- unsigned long ocm_stext, unsigned long ocm_etext,
- unsigned long sstack, unsigned long estack);
-#ifdef CONFIG_STACKTRACE
-void stacktrace_save_entries(struct task_struct *tsk, struct stack_trace *trace, unsigned long sp);
-#endif
-#endif /* _ASM_UBICOM32_STACKTRACE_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/stat.h
- * File status definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_STAT_H
-#define _ASM_UBICOM32_STAT_H
-
-struct __old_kernel_stat {
- unsigned short st_dev;
- unsigned short st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned long st_size;
- unsigned long st_atime;
- unsigned long st_mtime;
- unsigned long st_ctime;
-};
-
-struct stat {
- unsigned short st_dev;
- unsigned short __pad1;
- unsigned long st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned short __pad2;
- unsigned long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
- unsigned long st_atime;
- unsigned long __unused1;
- unsigned long st_mtime;
- unsigned long __unused2;
- unsigned long st_ctime;
- unsigned long __unused3;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
- unsigned long long st_dev;
- unsigned char __pad1[2];
-
-#define STAT64_HAS_BROKEN_ST_INO 1
- unsigned long __st_ino;
-
- unsigned int st_mode;
- unsigned int st_nlink;
-
- unsigned long st_uid;
- unsigned long st_gid;
-
- unsigned long long st_rdev;
- unsigned char __pad3[2];
-
- long long st_size;
- unsigned long st_blksize;
-
- unsigned long long st_blocks; /* Number 512-byte blocks allocated. */
-
- unsigned long st_atime;
- unsigned long st_atime_nsec;
-
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
-
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
-
- unsigned long long st_ino;
-};
-
-#endif /* _ASM_UBICOM32_STAT_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/statfs.h
- * Generic statfs.h definitions
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_STATFS_H
-#define _ASM_UBICOM32_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* _ASM_UBICOM32_STATFS_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/string.h
- * String operation definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_STRING_H
-#define _ASM_UBICOM32_STRING_H
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *b, int c, size_t len);
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *to, const void *from, size_t len);
-
-#define __HAVE_ARCH_MEMMOVE
-extern void * memmove(void *to, const void *from, size_t len);
-
-#endif /* _ASM_UBICOM32_STRING_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/byteorder.h
- * Byte order swapping utility routines.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_BYTEORDER_H
-#define _ASM_UBICOM32_BYTEORDER_H
-
-#include <linux/types.h>
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-# define __SWAB_64_THRU_32__
-#endif
-
-#if defined(IP7000) || defined(IP7000_REV2)
-
-#define __arch__swab16 __builtin_ubicom32_swapb_2
-#define __arch__swab32 __builtin_ubicom32_swapb_4
-
-#endif /* IP7000 */
-
-#endif /* _ASM_UBICOM32_BYTEORDER_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/switch-dev.h
- * generic Ethernet switch platform data definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SWITCH_DEV_H
-#define _ASM_UBICOM32_SWITCH_DEV_H
-
-#define SWITCH_DEV_FLAG_HW_RESET 0x01
-#define SWITCH_DEV_FLAG_SW_RESET 0x02
-
-struct switch_core_platform_data {
- /*
- * See flags above
- */
- u32_t flags;
-
- /*
- * GPIO to use for nReset
- */
- int pin_reset;
-
- /*
- * Name of this switch
- */
- const char *name;
-};
-
-#endif /* _ASM_UBICOM32_SWITCH_DEV_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/system.h
- * Low level switching definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_SYSTEM_H
-#define _ASM_UBICOM32_SYSTEM_H
-
-#include <linux/irqflags.h>
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/entry.h>
-#include <asm/ldsr.h>
-#include <asm/irq.h>
-#include <asm/percpu.h>
-#include <asm/ubicom32-common.h>
-#include <asm/processor.h>
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing.
- */
-asmlinkage void resume(void);
-extern void *__switch_to(struct task_struct *prev,
- struct thread_struct *prev_switch,
- struct thread_struct *next_switch);
-
-/*
- * We will need a per linux thread sw_ksp for the switch_to macro to
- * track the kernel stack pointer for the current thread on that linux thread.
- */
-#define switch_to(prev,next,last) \
-({ \
- void *_last; \
- _last = (void *) \
- __switch_to(prev, &prev->thread, &next->thread); \
- (last) = _last; \
-})
-
-/*
- * Force strict CPU ordering.
- * Not really required on ubicom32...
- */
-#define nop() asm volatile ("nop"::)
-#define mb() asm volatile ("" : : :"memory")
-#define rmb() asm volatile ("" : : :"memory")
-#define wmb() asm volatile ("" : : :"memory")
-#define set_mb(var, value) ({ (var) = (value); wmb(); })
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define smp_read_barrier_depends() read_barrier_depends()
-#else
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define smp_read_barrier_depends() do { } while(0)
-#endif
-
-#define read_barrier_depends() ((void)0)
-
-/*
- * The following defines change how the scheduler calls the switch_to()
- * macro.
- *
- * 1) The first causes the runqueue to be unlocked on entry to
- * switch_to(). Since our ctx code does not play with the runqueue
- * we do not need it unlocked.
- *
- * 2) The later turns interrupts on during a ctxsw to reduce the latency of
- * interrupts during ctx. At this point in the port, we believe that this
- * latency is not a problem since we have very little code to perform a ctxsw.
- */
-// #define __ARCH_WANT_UNLOCKED_CTXSW
-// #define __ARCH_WANT_INTERRUPTS_ON_CTXSW
-
-#endif /* _ASM_UBICOM32_SYSTEM_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/termbits.h
- * Terminal/serial port definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_TERMBITS_H
-#define _ASM_UBICOM32_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct termios2 {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-struct ktermios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-
-/* c_iflag bits */
-#define IGNBRK 0000001
-#define BRKINT 0000002
-#define IGNPAR 0000004
-#define PARMRK 0000010
-#define INPCK 0000020
-#define ISTRIP 0000040
-#define INLCR 0000100
-#define IGNCR 0000200
-#define ICRNL 0000400
-#define IUCLC 0001000
-#define IXON 0002000
-#define IXANY 0004000
-#define IXOFF 0010000
-#define IMAXBEL 0020000
-#define IUTF8 0040000
-
-/* c_oflag bits */
-#define OPOST 0000001
-#define OLCUC 0000002
-#define ONLCR 0000004
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-
-/* c_cflag bit meaning */
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060
-#define CS5 0000000
-#define CS6 0000020
-#define CS7 0000040
-#define CS8 0000060
-#define CSTOPB 0000100
-#define CREAD 0000200
-#define PARENB 0000400
-#define PARODD 0001000
-#define HUPCL 0002000
-#define CLOCAL 0004000
-#define CBAUDEX 0010000
-#define BOTHER 0010000
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG 0000001
-#define ICANON 0000002
-#define XCASE 0000004
-#define ECHO 0000010
-#define ECHOE 0000020
-#define ECHOK 0000040
-#define ECHONL 0000100
-#define NOFLSH 0000200
-#define TOSTOP 0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE 0004000
-#define FLUSHO 0010000
-#define PENDIN 0040000
-#define IEXTEN 0100000
-
-
-/* tcflow() and TCXONC use these */
-#define TCOOFF 0
-#define TCOON 1
-#define TCIOFF 2
-#define TCION 3
-
-/* tcflush() and TCFLSH use these */
-#define TCIFLUSH 0
-#define TCOFLUSH 1
-#define TCIOFLUSH 2
-
-/* tcsetattr uses these */
-#define TCSANOW 0
-#define TCSADRAIN 1
-#define TCSAFLUSH 2
-
-#endif /* _ASM_UBICOM32_TERMBITS_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/termios.h
- * Ubicom32 termio definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_TERMIOS_H
-#define _ASM_UBICOM32_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-#ifdef __KERNEL__
-/* intr=^C quit=^| erase=del kill=^U
- eof=^D vtime=\0 vmin=\1 sxtc=\0
- start=^Q stop=^S susp=^Z eol=\0
- reprint=^R discard=^U werase=^W lnext=^V
- eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* modem lines */
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
- unsigned short tmp; \
- get_user(tmp, &(termio)->c_iflag); \
- (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
- get_user(tmp, &(termio)->c_oflag); \
- (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
- get_user(tmp, &(termio)->c_cflag); \
- (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
- get_user(tmp, &(termio)->c_lflag); \
- (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
- get_user((termios)->c_line, &(termio)->c_line); \
- copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
- put_user((termios)->c_iflag, &(termio)->c_iflag); \
- put_user((termios)->c_oflag, &(termio)->c_oflag); \
- put_user((termios)->c_cflag, &(termio)->c_cflag); \
- put_user((termios)->c_lflag, &(termio)->c_lflag); \
- put_user((termios)->c_line, &(termio)->c_line); \
- copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_UBICOM32_TERMIOS_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/thread-asm.h
- * Ubicom32 architecture specific thread definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_THREAD_ASM_H
-#define _ASM_UBICOM32_THREAD_ASM_H
-
-/*
- * thread_get_self
- * Read and shift the current thread into reg
- *
- * Note that we don't need to mask the result as bits 6 through 31 of the
- * ROSR are zeroes.
- */
-.macro thread_get_self reg
- lsr.4 \reg, ROSR, #2
-.endm
-
-/*
- * thread_get_self_mask
- * Read and shift the current thread mask into reg
- */
-.macro thread_get_self_mask reg
- lsr.4 \reg, ROSR, #2
- lsl.4 \reg, #1, \reg /* Thread bit */
-.endm
-
-#endif /* _ASM_UBICOM32_THREAD_ASM_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/thread.h
- * Ubicom32 architecture specific thread definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_THREAD_H
-#define _ASM_UBICOM32_THREAD_H
-
-#if !defined(__ASSEMBLY__)
-
-#include <asm/ptrace.h>
-#include <asm/ubicom32-common.h>
-
-typedef int thread_t;
-typedef unsigned char thread_type_t;
-typedef void (*thread_exec_fn_t)(void *arg);
-
-#define THREAD_NULL 0x40
-#define THREAD_TYPE_HRT (1 << 0)
-#define THREAD_TYPE_SPECIAL 0
-#define THREAD_TYPE_NORMAL 0
-#define THREAD_TYPE_BACKGROUND (1 << 1)
-
-/*
- * This is the upper bound on the maximum hardware threads that one will find
- * on a Ubicom processor. It is used to size per hardware thread data structures.
- */
-#define THREAD_ARCHITECTURAL_MAX 16
-
-/*
- * TODO: Rename this at some point to be thread_
- */
-extern unsigned int sw_ksp[THREAD_ARCHITECTURAL_MAX];
-
-
-/*
- * thread_get_self()
- */
-static inline thread_t thread_get_self(void)
-{
- thread_t result;
-
- /*
- * Note that ROSR has zeroes in bits 6 through 31 and so we don't need
- * to do any additional bit masking here.
- */
- asm (
- "lsr.4 %0, ROSR, #2 \n\t"
- : "=d" (result)
- :
- : "cc"
- );
-
- return result;
-}
-
-/*
- * thread_suspend()
- */
-static inline void thread_suspend(void)
-{
- asm volatile (
- "suspend\n\t"
- :
- :
- );
-}
-
-/*
- * thread_resume()
- */
-static inline void thread_resume(thread_t thread)
-{
- asm volatile (
- "move.4 MT_ACTIVE_SET, %0 \n\t"
- "pipe_flush 0 \n\t"
- "pipe_flush 0 \n\t"
- :
- : "d" (1 << thread)
- );
-}
-
-
-
-/*
- * thread_enable_mask()
- * Enable all threads in the mask.
- *
- * All writes to MT_EN must be protected by the MT_EN_LOCK bit
- */
-static inline void thread_enable_mask(unsigned int mask)
-{
- /*
- * must flush the pipeline twice.
- * first pipe_flush is to ensure write to MT_EN is completed
- * second one is to ensure any new instructions from
- * the targeted thread (the one being disabled), that
- * are issued while the write to MT_EN is being executed,
- * are completed.
- */
- UBICOM32_LOCK(MT_EN_LOCK_BIT);
- asm volatile (
- "or.4 MT_EN, MT_EN, %0 \n\t"
- "pipe_flush 0 \n\t"
- "pipe_flush 0 \n\t"
- :
- : "d" (mask)
- : "cc"
- );
- UBICOM32_UNLOCK(MT_EN_LOCK_BIT);
-}
-
-/*
- * thread_enable()
- */
-static inline void thread_enable(thread_t thread)
-{
- thread_enable_mask(1 << thread);
-}
-
-/*
- * thread_disable_mask()
- * Disable all threads in the mask.
- *
- * All writes to MT_EN must be protected by the MT_EN_LOCK bit
- */
-static inline void thread_disable_mask(unsigned int mask)
-{
- /*
- * must flush the pipeline twice.
- * first pipe_flush is to ensure write to MT_EN is completed
- * second one is to ensure any new instructions from
- * the targeted thread (the one being disabled), that
- * are issued while the write to MT_EN is being executed,
- * are completed.
- */
- UBICOM32_LOCK(MT_EN_LOCK_BIT);
- asm volatile (
- "and.4 MT_EN, MT_EN, %0 \n\t"
- "pipe_flush 0 \n\t"
- "pipe_flush 0 \n\t"
- :
- : "d" (~mask)
- : "cc"
- );
- UBICOM32_UNLOCK(MT_EN_LOCK_BIT);
-}
-
-/*
- * thread_disable()
- */
-static inline void thread_disable(thread_t thread)
-{
- thread_disable_mask(1 << thread);
-}
-
-/*
- * thread_disable_others()
- * Disable all other threads
- */
-static inline void thread_disable_others(void)
-{
- thread_t self = thread_get_self();
- thread_disable_mask(~(1 << self));
-}
-
-/*
- * thread_is_trapped()
- * Is the specified tid trapped?
- */
-static inline int thread_is_trapped(thread_t tid)
-{
- int thread_mask = (1 << tid);
- int trap_thread;
-
- asm (
- "move.4 %0, MT_TRAP \n\t"
- : "=d" (trap_thread)
- :
- );
- return (trap_thread & thread_mask);
-}
-
-/*
- * thread_is_enabled()
- * Is the specified tid enabled?
- */
-static inline int thread_is_enabled(thread_t tid)
-{
- int thread_mask = (1 << tid);
- int enabled_threads;
-
- asm (
- "move.4 %0, MT_EN \n\t"
- : "=d" (enabled_threads)
- :
- );
- return (enabled_threads & thread_mask);
-}
-
-/*
- * thread_get_instruction_count()
- */
-static inline unsigned int thread_get_instruction_count(void)
-{
- unsigned int result;
- asm (
- "move.4 %0, INST_CNT \n\t"
- : "=r" (result)
- );
- return result;
-}
-
-/*
- * thread_get_pc()
- * pc could point to a speculative and cancelled instruction unless thread is disabled
- */
-static inline void *thread_get_pc(thread_t thread)
-{
- void *result;
- asm (
- "move.4 csr, %1 \n\t"
- "setcsr_flush 0 \n\t"
- "move.4 %0, pc \n\t"
- "move.4 csr, #0 \n\t"
- "setcsr_flush 0 \n\t"
- : "=r" (result)
- : "r" ((thread << 9) | (1 << 8))
- );
- return result;
-}
-
-/*
- * thread_get_trap_cause()
- * This should be called only when the thread is not running
- */
-static inline unsigned int thread_get_trap_cause(thread_t thread)
-{
- unsigned int result;
- asm (
- "move.4 csr, %1 \n\t"
- "setcsr_flush 0 \n\t"
- "move.4 %0, trap_cause \n\t"
- "move.4 csr, #0 \n\t"
- "setcsr_flush 0 \n\t"
- : "=r" (result)
- : "r" ((thread << 9) | (1 << 8))
- );
- return result;
-}
-
-/*
- * THREAD_STALL macro.
- */
-#define THREAD_STALL \
- asm volatile ( \
- "move.4 mt_dbg_active_clr, #-1 \n\t" \
- "pipe_flush 0 \n\t" \
- : \
- : \
- )
-
-extern unsigned int thread_get_mainline(void);
-extern void thread_set_mainline(thread_t tid);
-extern thread_t thread_alloc(void);
-extern thread_t thread_start(thread_t thread, thread_exec_fn_t exec, void *arg, unsigned int *sp_high, thread_type_t type);
-
-/*
- * asm macros
- */
-asm (
-/*
- * thread_get_self
- * Read and shift the current thread into reg
- *
- * Note that we don't need to mask the result as bits 6 through 31 of the
- * ROSR are zeroes.
- */
-".macro thread_get_self reg \n\t"
-" lsr.4 \\reg, ROSR, #2 \n\t"
-".endm \n\t"
-
-/*
- * thread_get_self_mask
- * Read and shift the current thread mask into reg
- */
-".macro thread_get_self_mask reg \n\t"
-" lsr.4 \\reg, ROSR, #2 \n\t"
-" lsl.4 \\reg, #1, \\reg \n\t" /* Thread bit */
-".endm \n\t"
-);
-
-#else /* __ASSEMBLY__ */
-
-#include <asm/thread-asm.h>
-
-#endif /* __ASSEMBLY__ */
-#endif /* _ASM_UBICOM32_THREAD_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/thread_info.h
- * Ubicom32 architecture low-level thread information.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com)
- * Copyright (C) 2002 David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#ifndef _ASM_UBICOM32_THREAD_INFO_H
-#define _ASM_UBICOM32_THREAD_INFO_H
-
-#include <asm/page.h>
-
-/*
- * Size of kernel stack for each process. This must be a power of 2...
- */
-#ifdef CONFIG_4KSTACKS
-#define THREAD_SIZE_ORDER (0)
-#else
-#define THREAD_SIZE_ORDER (1)
-#endif
-
-/*
- * for asm files, THREAD_SIZE is now generated by asm-offsets.c
- */
-#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-/*
- * low level task data.
- */
-struct thread_info {
- struct task_struct *task; /* main task structure */
- struct exec_domain *exec_domain; /* execution domain */
- unsigned long flags; /* low level flags */
- int cpu; /* cpu we're on */
- int preempt_count; /* 0 => preemptable, <0 => BUG */
- int interrupt_nesting; /* Interrupt nesting level. */
- struct restart_block restart_block;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .exec_domain = &default_exec_domain, \
- .flags = 0, \
- .cpu = 0, \
- .interrupt_nesting = 0, \
- .restart_block = { \
- .fn = do_no_restart_syscall, \
- }, \
-}
-
-#define init_thread_info (init_thread_union.thread_info)
-#define init_stack (init_thread_union.stack)
-
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
- struct thread_info *ti;
-
- asm (
- "and.4 %0, sp, %1\n\t"
- : "=&r" (ti)
- : "d" (~(THREAD_SIZE-1))
- : "cc"
- );
-
- return ti;
-}
-
-#define STACK_WARN (THREAD_SIZE / 8)
-
-#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR 1
-
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) \
- __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER))
-#define free_thread_info(ti) free_pages((unsigned long) (ti), THREAD_SIZE_ORDER)
-#endif /* __ASSEMBLY__ */
-
-#define PREEMPT_ACTIVE 0x4000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 1 /* signal pending */
-#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
-#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling
- TIF_NEED_RESCHED */
-#define TIF_MEMDIE 4
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
-
-#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_UBICOM32_THREAD_INFO_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/timex.h
- * Ubicom32 architecture timex specifications.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_TIMEX_H
-#define _ASM_UBICOM32_TIMEX_H
-
-#define CLOCK_TICK_RATE 266000000
-
-// #define ARCH_HAS_READ_CURRENT_TIMER
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles(void)
-{
- return 0;
-}
-
-extern int timer_alloc(void);
-extern void timer_set(int timervector, unsigned int cycles);
-extern int timer_reset(int timervector, unsigned int cycles);
-extern void timer_tick_init(void);
-extern void timer_device_init(void);
-
-#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
-extern void local_timer_interrupt(void);
-#endif
-
-#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
-extern int local_timer_setup(unsigned int cpu);
-#endif
-
-#endif /* _ASM_UBICOM32_TIMEX_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/tlb.h
- * Ubicom32 architecture TLB operations.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_TLB_H
-#define _ASM_UBICOM32_TLB_H
-
-/*
- * ubicom32 doesn't need any special per-pte or
- * per-vma handling..
- */
-#define tlb_start_vma(tlb, vma) do { } while (0)
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
-
-/*
- * .. because we flush the whole mm when it
- * fills up.
- */
-#define tlb_flush(tlb)
-
-#include <asm-generic/tlb.h>
-
-#endif /* _ASM_UBICOM32_TLB_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/tlbflush.h
- * TLB operations for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
- * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_TLB_FLUSH_H
-#define _ASM_UBICOM32_TLB_FLUSH_H
-
-#include <asm/setup.h>
-
-/*
- * flush all user-space atc entries.
- */
-static inline void __flush_tlb(void)
-{
- BUG();
-}
-
-static inline void __flush_tlb_one(unsigned long addr)
-{
- BUG();
-}
-
-#define flush_tlb() __flush_tlb()
-
-/*
- * flush all atc entries (both kernel and user-space entries).
- */
-static inline void flush_tlb_all(void)
-{
- BUG();
-}
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
- BUG();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
- BUG();
-}
-
-static inline void flush_tlb_range(struct mm_struct *mm,
- unsigned long start, unsigned long end)
-{
- BUG();
-}
-
-static inline void flush_tlb_kernel_page(unsigned long addr)
-{
- BUG();
-}
-
-#endif /* _ASM_UBICOM32_TLB_FLUSH_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/topology.h
- * Generic topology.h definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_TOPOLOGY_H
-#define _ASM_UBICOM32_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_UBICOM32_TOPOLOGY_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/traps.h
- * Trap related definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#ifndef _ASM_UBICOM32_TRAPS_H
-#define _ASM_UBICOM32_TRAPS_H
-
-/*
- * Trap causes passed from ultra to Host OS
- */
-#define TRAP_CAUSE_TOTAL 13
-#define TRAP_CAUSE_DST_RANGE_ERR 12
-#define TRAP_CAUSE_SRC1_RANGE_ERR 11
-#define TRAP_CAUSE_I_RANGE_ERR 10
-#define TRAP_CAUSE_DCAPT 9
-#define TRAP_CAUSE_DST_SERROR 8
-#define TRAP_CAUSE_SRC1_SERROR 7
-#define TRAP_CAUSE_DST_MISALIGNED 6
-#define TRAP_CAUSE_SRC1_MISALIGNED 5
-#define TRAP_CAUSE_DST_DECODE_ERR 4
-#define TRAP_CAUSE_SRC1_DECODE_ERR 3
-#define TRAP_CAUSE_ILLEGAL_INST 2
-#define TRAP_CAUSE_I_SERROR 1
-#define TRAP_CAUSE_I_DECODE_ERR 0
-
-extern void trap_handler(int irq, struct pt_regs *regs);
-extern void trap_init_interrupt(void);
-extern void unaligned_emulate(unsigned int thread);
-extern int unaligned_only(unsigned int cause);
-
-#endif /* _ASM_UBICOM32_TRAPS_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/types.h
- * Date type definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_TYPES_H
-#define _ASM_UBICOM32_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue. However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#ifndef __ASSEMBLY__
-
-/* DMA addresses are always 32-bits wide */
-
-typedef u32 dma_addr_t;
-typedef u32 dma64_addr_t;
-
-/*
- * XXX These are "Ubicom style" typedefs. They should be removed in all files used by linux.
- */
-typedef u32 u32_t;
-typedef s32 s32_t;
-typedef u16 u16_t;
-typedef s16 s16_t;
-typedef u8 u8_t;
-typedef s8 s8_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_UBICOM32_TYPES_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/uaccess.h
- * User space memory access functions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- * arch/alpha
- */
-#ifndef _ASM_UBICOM32_UACCESS_H
-#define _ASM_UBICOM32_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-
-#include <asm/segment.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-struct exception_table_entry
-{
- unsigned long insn, fixup;
-};
-
-/*
- * Ubicom32 does not currently support the exception table handling.
- */
-extern unsigned long search_exception_table(unsigned long);
-
-
-#if defined(CONFIG_ACCESS_OK_CHECKS_ENABLED)
-extern int __access_ok(unsigned long addr, unsigned long size);
-#else
-static inline int __access_ok(unsigned long addr, unsigned long size)
-{
- return 1;
-}
-#endif
-#define access_ok(type, addr, size) \
- likely(__access_ok((unsigned long)(addr), (size)))
-
-/*
- * The following functions do not exist. They keep callers
- * of put_user and get_user from passing unsupported argument
- * types. They result in a link time error.
- */
-extern int __put_user_bad(void);
-extern int __get_user_bad(void);
-
-/*
- * __put_user_no_check()
- * Put the requested data into the user space verifying the address
- *
- * Careful to not
- * (a) re-use the arguments for side effects (sizeof/typeof is ok)
- * (b) require any knowledge of processes at this stage
- */
-#define __put_user_no_check(x, ptr, size) \
-({ \
- int __pu_err = 0; \
- __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
- switch (size) { \
- case 1: \
- case 2: \
- case 4: \
- case 8: \
- *__pu_addr = (__typeof__(*(ptr)))x; \
- break; \
- default: \
- __pu_err = __put_user_bad(); \
- break; \
- } \
- __pu_err; \
-})
-
-/*
- * __put_user_check()
- * Put the requested data into the user space verifying the address
- *
- * Careful to not
- * (a) re-use the arguments for side effects (sizeof/typeof is ok)
- * (b) require any knowledge of processes at this stage
- *
- * If requested, access_ok() will verify that ptr is a valid user
- * pointer.
- */
-#define __put_user_check(x, ptr, size) \
-({ \
- int __pu_err = -EFAULT; \
- __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
- if (access_ok(VERIFY_WRITE, __pu_addr, size)) { \
- __pu_err = 0; \
- switch (size) { \
- case 1: \
- case 2: \
- case 4: \
- case 8: \
- *__pu_addr = (__typeof__(*(ptr)))x; \
- break; \
- default: \
- __pu_err = __put_user_bad(); \
- break; \
- } \
- } \
- __pu_err; \
-})
-
-/*
- * __get_user_no_check()
- * Read the value at ptr into x.
- *
- * If requested, access_ok() will verify that ptr is a valid user
- * pointer. If the caller passes a modifying argument for ptr (e.g. x++)
- * this macro will not work.
- */
-#define __get_user_no_check(x, ptr, size) \
-({ \
- int __gu_err = 0; \
- __typeof__((x)) __gu_val = 0; \
- const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
- switch (size) { \
- case 1: \
- case 2: \
- case 4: \
- case 8: \
- __gu_val = (__typeof__((x)))*(__gu_addr); \
- break; \
- default: \
- __gu_err = __get_user_bad(); \
- (x) = 0; \
- break; \
- } \
- (x) = __gu_val; \
- __gu_err; \
-})
-
-/*
- * __get_user_check()
- * Read the value at ptr into x.
- *
- * If requested, access_ok() will verify that ptr is a valid user
- * pointer.
- */
-#define __get_user_check(x, ptr, size) \
-({ \
- int __gu_err = -EFAULT; \
- __typeof__(x) __gu_val = 0; \
- const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
- if (access_ok(VERIFY_READ, __gu_addr, size)) { \
- __gu_err = 0; \
- switch (size) { \
- case 1: \
- case 2: \
- case 4: \
- case 8: \
- __gu_val = (__typeof__((x)))*(__gu_addr); \
- break; \
- default: \
- __gu_err = __get_user_bad(); \
- (x) = 0; \
- break; \
- } \
- } \
- (x) = __gu_val; \
- __gu_err; \
-})
-
-/*
- * The "xxx" versions are allowed to perform some amount of address
- * space checking. See access_ok().
- */
-#define put_user(x,ptr) \
- __put_user_check((__typeof__(*(ptr)))(x),(ptr), sizeof(*(ptr)))
-#define get_user(x,ptr) \
- __get_user_check((x), (ptr), sizeof(*(ptr)))
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the programmer has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x,ptr) \
- __put_user_no_check((__typeof__(*(ptr)))(x),(ptr), sizeof(*(ptr)))
-#define __get_user(x,ptr) \
- __get_user_no_check((x), (ptr), sizeof(*(ptr)))
-
-/*
- * __copy_tofrom_user_no_check()
- * Copy the data either to or from user space.
- *
- * Return the number of bytes NOT copied.
- */
-static inline unsigned long
-__copy_tofrom_user_no_check(void *to, const void *from, unsigned long n)
-{
- memcpy(to, from, n);
- return 0;
-}
-
-/*
- * copy_to_user()
- * Copy the kernel data to user space.
- *
- * Return the number of bytes that were copied.
- */
-static inline unsigned long
-copy_to_user(void __user *to, const void *from, unsigned long n)
-{
- if (!access_ok(VERIFY_WRITE, to, n)) {
- return n;
- }
- return __copy_tofrom_user_no_check((__force void *)to, from, n);
-}
-
-/*
- * copy_from_user()
- * Copy the user data to kernel space.
- *
- * Return the number of bytes that were copied. On error, we zero
- * out the destination.
- */
-static inline unsigned long
-copy_from_user(void *to, const void __user *from, unsigned long n)
-{
- if (!access_ok(VERIFY_READ, from, n)) {
- return n;
- }
- return __copy_tofrom_user_no_check(to, (__force void *)from, n);
-}
-
-#define __copy_to_user(to, from, n) \
- __copy_tofrom_user_no_check((__force void *)to, from, n)
-#define __copy_from_user(to, from, n) \
- __copy_tofrom_user_no_check(to, (__force void *)from, n)
-#define __copy_to_user_inatomic(to, from, n) \
- __copy_tofrom_user_no_check((__force void *)to, from, n)
-#define __copy_from_user_inatomic(to, from, n) \
- __copy_tofrom_user_no_check(to, (__force void *)from, n)
-
-#define copy_to_user_ret(to, from, n, retval) \
- ({ if (copy_to_user(to, from, n)) return retval; })
-
-#define copy_from_user_ret(to, from, n, retval) \
- ({ if (copy_from_user(to, from, n)) return retval; })
-
-/*
- * strncpy_from_user()
- * Copy a null terminated string from userspace.
- *
- * dst - Destination in kernel space. The buffer must be at least count.
- * src - Address of string in user space.
- * count - Maximum number of bytes to copy (including the trailing NULL).
- *
- * Returns the length of the string (not including the trailing NULL. If
- * count is smaller than the length of the string, we copy count bytes
- * and return count.
- *
- */
-static inline long strncpy_from_user(char *dst, const __user char *src, long count)
-{
- char *tmp;
- if (!access_ok(VERIFY_READ, src, 1)) {
- return -EFAULT;
- }
-
- strncpy(dst, src, count);
- for (tmp = dst; *tmp && count > 0; tmp++, count--) {
- ;
- }
- return(tmp - dst);
-}
-
-/*
- * strnlen_user()
- * Return the size of a string (including the ending 0)
- *
- * Return -EFAULT on exception, a value greater than <n> if too long
- */
-static inline long strnlen_user(const __user char *src, long n)
-{
- if (!access_ok(VERIFY_READ, src, 1)) {
- return -EFAULT;
- }
- return(strlen(src) + 1);
-}
-
-#define strlen_user(str) strnlen_user(str, 32767)
-
-/*
- * __clear_user()
- * Zero Userspace
- */
-static inline unsigned long __clear_user(__user void *to, unsigned long n)
-{
- memset(to, 0, n);
- return 0;
-}
-
-/*
- * clear_user()
- * Zero user space (check for valid addresses)
- */
-static inline unsigned long clear_user(__user void *to, unsigned long n)
-{
- if (!access_ok(VERIFY_WRITE, to, n)) {
- return -EFAULT;
- }
- return __clear_user(to, n);
-}
-
-#endif /* _ASM_UBICOM32_UACCESS_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/uart_tio.h
- * Ubicom32 architecture UART TIO definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-#ifndef _ASM_UBICOM32_UART_TIO_H
-#define _ASM_UBICOM32_UART_TIO_H
-
-#include <asm/devtree.h>
-
-#define UARTTIO_RX_FIFO_SIZE 16
-#define UARTTIO_TX_FIFO_SIZE 16
-
-/*
- * Interrupt flags
- */
-#define UARTTIO_UART_INT_RX 0x00000001 // set when a character has been recevied (TODO: add watermark)
-#define UARTTIO_UART_INT_RXOVF 0x00000002 // set when the receive buffer has overflowed
-#define UARTTIO_UART_INT_RXFRAME 0x00000004 // set when there has been a framing error
-
-#define UARTTIO_UART_INT_TX 0x00000100 // set every time a character is transmitted
-#define UARTTIO_UART_INT_TXBE 0x00000200 // set when the transmit buffer is empty (TODO: add watermark)
-
-#define UARTTIO_UART_FLAG_ENABLED 0x80000000
-#define UARTTIO_UART_FLAG_SET_RATE 0x00000001 // set to update baud rate
-#define UARTTIO_UART_FLAG_RESET 0x00000002 // set to reset the port
-struct uarttio_uart {
- volatile u32_t flags;
-
- volatile u32_t baud_rate;
- volatile u32_t current_baud_rate;
- u32_t bit_time;
-
- /*
- * Modem status register
- */
- volatile u32_t status;
-
- /*
- * Interrupt registers
- */
- volatile u32_t int_mask;
- volatile u32_t int_flags;
-
- /*
- * Ports and pins
- */
- u32_t rx_port;
- u32_t tx_port;
-
- u8_t rx_pin;
- u8_t tx_pin;
-
- /*
- * Configuration Data
- */
- u8_t rx_bits;
- u8_t rx_stop_bits;
- u8_t tx_bits;
- u8_t tx_stop_bits;
-
- /*
- * RX state machine data
- */
- u32_t rx_timer;
- u32_t rx_bit_pos;
- u32_t rx_byte;
- u32_t rx_fifo_head;
- u32_t rx_fifo_tail;
- u32_t rx_fifo_size;
-
- /*
- * TX state machine data
- */
- u32_t tx_timer;
- u32_t tx_bit_pos;
- u32_t tx_byte;
- u32_t tx_fifo_head;
- u32_t tx_fifo_tail;
- u32_t tx_fifo_size;
-
- /*
- * FIFOs
- */
- u8_t rx_fifo[UARTTIO_RX_FIFO_SIZE];
- u8_t tx_fifo[UARTTIO_TX_FIFO_SIZE];
-};
-
-#define UARTTIO_VP_VERSION 1
-struct uarttio_regs {
- u32_t version;
-
- u32_t thread;
-
- u32_t max_uarts;
-
- struct uarttio_uart uarts[0];
-};
-
-#define UARTTIO_NODE_VERSION 1
-struct uarttio_node {
- struct devtree_node dn;
-
- u32_t version;
- struct uarttio_regs *regs;
- u32_t regs_sz;
-};
-
-#endif /* _ASM_UBICOM32_UART_TIO_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ubi32-cs4384.h
- * Ubicom32 architecture CS4384 driver platform data definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-#ifndef _ASM_UBICOM32_UBI32_CS4384_H
-#define _ASM_UBICOM32_UBI32_CS4384_H
-
-enum ubi32_cs4384_mclk_source {
- UBI32_CS4384_MCLK_PWM_0,
- UBI32_CS4384_MCLK_PWM_1,
- UBI32_CS4384_MCLK_PWM_2,
- UBI32_CS4384_MCLK_CLKDIV_1,
- UBI32_CS4384_MCLK_OTHER,
-};
-
-struct ubi32_cs4384_mclk_entry {
- /*
- * Rate, in Hz, of this entry
- */
- int rate;
-
- /*
- * The divider to program to get the rate
- */
- int div;
-};
-
-struct ubi32_cs4384_platform_data {
- enum ubi32_cs4384_mclk_source mclk_src;
-
- int n_mclk;
- struct ubi32_cs4384_mclk_entry *mclk_entries;
-};
-#endif /* _ASM_UBICOM32_UBI32_CS4384_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ubi32-pcm.h
- * Ubicom32 architecture PCM driver platform data definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-#ifndef _ASM_UBICOM32_UBI32_PCM_H
-#define _ASM_UBICOM32_UBI32_PCM_H
-
-/*
- * This function is called when the sample rate has changed
- */
-typedef int (*ubi32_pcm_set_rate_fn_t)(void *appdata, int rate);
-
-struct ubi32pcm_platform_data {
- /*
- * Name of the audio node/inst
- */
- const char *node_name;
- const char *inst_name;
- int inst_num;
-
- /*
- * Application specific data provided when calling functions
- */
- void *appdata;
-
- /*
- * Functions called when various things happen
- */
- ubi32_pcm_set_rate_fn_t set_rate;
-
- /*
- * Pointer to optional upper layer data (i.e. DAC config, etc)
- */
- void *priv_data;
-};
-#endif /* _ASM_UBICOM32_UBI32_PCM_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ubicom32-common-asm.h
- * Ubicom32 atomic lock operations.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#ifndef _ASM_UBICOM32_UBICOM32_COMMON_ASM_H
-#define _ASM_UBICOM32_UBICOM32_COMMON_ASM_H
-
-/*
- * atomic_lock_acquire macro
- * Equivalent to __atomic_lock_acquire()
- */
-.macro atomic_lock_acquire
- bset scratchpad1, scratchpad1, #ATOMIC_LOCK_BIT
- jmpne.f .-4
-.endm
-
-/*
- * atomic_lock_release macro
- * Equivalent to __atomic_lock_release()
- */
-.macro atomic_lock_release
- bclr scratchpad1, scratchpad1, #ATOMIC_LOCK_BIT
-.endm
-
-#endif /* _ASM_UBICOM32_UBICOM32_COMMON_ASM_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ubicom32-common.h
- * Ubicom32 atomic lock operations.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#ifndef _ASM_UBICOM32_UBICOM32_COMMON_H
-#define _ASM_UBICOM32_UBICOM32_COMMON_H
-
-#define S(arg) #arg
-#define D(arg) S(arg)
-/*
- * scratchpad1 is owned by the LDSR.
- *
- * The upper bits provide 16 global spinlocks. Acquiring one of these
- * global spinlocks synchornizes across multiple threads and prevents
- * the LDSR from delivering any interrupts while the lock is held.
- * Use these locks only when absolutely required.
- *
- * The lower 16 bits of scratchpad1 are used as per thread interrupt
- * enable/disable bits. These bits will prevent a thread from receiving
- * any interrupts.
- *
- * Bit Usage:
- * - MT_EN_LOCK_BIT - Protects writes to MT_EN, so code can read current value
- * then write a new value atomically (profiler for example)
- * - ATOMIC_LOCK_BIT - Used to provide general purpose atomic handling.
- * - LDSR_LOCK_BIT - Used by the LDSR exclusively to provide protection.
- * - DCCR_LOCK_BIT - Used to limit access to the DCCR cache control peripheral
- * - ICCR_LOCK_BIT - Used to limit access to the ICCR cache control peripheral
- * - LSB 16 bits - Used by the LDSR to represent thread enable/disable bits.
- */
-#define MT_EN_LOCK_BIT 31
-#define ATOMIC_LOCK_BIT 30
-#define LDSR_LOCK_BIT 29
-#define PCI_LOCK_BIT 28
-#define ICCR_LOCK_BIT 27
-#define DCCR_LOCK_BIT 26
-
-#if !defined(__ASSEMBLY__)
-
-#define UBICOM32_TRYLOCK(bit) \
- asm volatile ( \
- " move.4 %0, #0 \n\t" \
- " bset scratchpad1, scratchpad1, #"D(bit)" \n\t" \
- " jmpne.f 1f \n\t" \
- " move.4 %0, #1 \n\t" \
- "1: \n\t" \
- : "=r" (ret) \
- : \
- : "cc", "memory" \
- ) \
-
-#define UBICOM32_UNLOCK(bit) \
- asm volatile ( \
- " bclr scratchpad1, scratchpad1, #"D(bit)" \n\t" \
- : \
- : \
- : "cc", "memory" \
- ) \
-
-#define UBICOM32_LOCK(bit) \
- asm volatile ( \
- "1: bset scratchpad1, scratchpad1, #"D(bit)" \n\t" \
- " jmpne.f 1b \n\t" \
- : \
- : \
- : "cc", "memory" \
- ) \
-
-/*
- * __atomic_lock_trylock()
- * Attempt to acquire the lock, return TRUE if acquired.
- */
-static inline int __atomic_lock_trylock(void)
-{
- int ret;
- UBICOM32_TRYLOCK(ATOMIC_LOCK_BIT);
- return ret;
-}
-
-/*
- * __atomic_lock_release()
- * Release the global atomic lock.
- *
- * Note: no one is suspended waiting since this lock is a spinning lock.
- */
-static inline void __atomic_lock_release(void)
-{
- UBICOM32_UNLOCK(ATOMIC_LOCK_BIT);
-}
-
-/*
- * __atomic_lock_acquire()
- * Acquire the global atomic lock, spin if not available.
- */
-static inline void __atomic_lock_acquire(void)
-{
- UBICOM32_LOCK(ATOMIC_LOCK_BIT);
-}
-#else /* __ASSEMBLY__ */
-
-#include <asm/ubicom32-common-asm.h>
-
-#endif /* __ASSEMBLY__ */
-#endif /* _ASM_UBICOM32_UBICOM32_COMMON_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ubicom32-spi-gpio.h
- * Platform driver data definitions for GPIO based SPI driver.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_UBICOM32_SPI_GPIO_H
-#define _ASM_UBICOM32_UBICOM32_SPI_GPIO_H
-
-struct ubicom32_spi_gpio_platform_data {
- /*
- * GPIO to use for MOSI, MISO, CLK
- */
- int pin_mosi;
- int pin_miso;
- int pin_clk;
-
- /*
- * Default state of CLK line
- */
- int clk_default;
-
- /*
- * Number of chip selects on this bus
- */
- int num_chipselect;
-
- /*
- * The bus number of this chip
- */
- int bus_num;
-};
-
-struct ubicom32_spi_gpio_controller_data {
- /*
- * GPIO to use for chip select
- */
- int pin_cs;
-};
-
-#endif /* _ASM_UBICOM32_UBICOM32_SPI_GPIO_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ubicom32-tio.h
- * Threaded I/O interface definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_UBICOM32_TIO_H
-#define _ASM_UBICOM32_UBICOM32_TIO_H
-
-extern u8_t usb_tio_read_u16(u32_t address, u16_t *data);
-extern u8_t usb_tio_read_u8(u32_t address, u8_t *data);
-
-extern u8_t usb_tio_write_u16(u32_t address, u16_t data);
-extern u8_t usb_tio_write_u8(u32_t address, u8_t data);
-
-extern u8_t usb_tio_read_fifo(u32_t address, u32_t buffer, u32_t bytes);
-extern u8_t usb_tio_write_fifo(u32_t address, u32_t buffer, u32_t bytes);
-extern u8_t usb_tio_write_fifo_sync(u32_t address, u32_t buffer, u32_t bytes);
-extern void usb_tio_read_int_status(u8_t *int_usb, u16_t *int_tx, u16_t *int_rx);
-
-#endif /* _ASM_UBICOM32_UBICOM32_TIO_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ubicom32bl.h
- * Ubicom32 architecture backlight driver platform data definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_UBICOM32_BL_H
-#define _ASM_UBICOM32_UBICOM32_BL_H
-
-/*
- * Different backlight control mechanisms
- */
-enum ubicom32bl_pwm_types {
- /*
- * PWM controlled backlight
- */
- UBICOM32BL_TYPE_PWM,
-
- /*
- * HRT based PWM backlight
- */
- UBICOM32BL_TYPE_PWM_HRT,
-
- /*
- * No dimming, just on or off
- */
- UBICOM32BL_TYPE_BINARY,
-};
-
-struct ubicom32bl_platform_data {
- /*
- * Default intensity of the backlight 0-255
- */
- u8_t default_intensity;
-
- /*
- * TRUE if the backlight sense is active low. (inverted)
- * FALSE if the backlight sense is active high.
- */
- bool invert;
-
- /*
- * Type of the backlight
- */
- enum ubicom32bl_pwm_types type;
-
- /*
- * GPIO of the backlight if UBICOM32BL_TYPE_PWM_HRT, UBICOM32BL_TYPE_BINARY
- */
- unsigned gpio;
-
- /*
- * PWM channel and parameters of the backlight if UBICOM32BL_TYPE_PWM
- * pre_scaler: sets the rate at which the PWM timer is clocked. (clk_core / 2^pre_scaler)
- * period: sets the period of the timer in timer cycles
- * The duty cycle will be directly proportional to the brightness setting.
- */
- u32_t pwm_channel;
- u8_t pwm_prescale;
- u16_t pwm_period;
-};
-
-#endif /* _ASM_UBICOM32_UBICOM32_BL_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ubicom32fb.h
- * Ubicom32 architecture video frame buffer definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-#ifndef _ASM_UBICOM32_UBICOM32FB_H
-#define _ASM_UBICOM32_UBICOM32FB_H
-
-#include <linux/ioctl.h>
-
-/*
- * Set next frame
- */
-#define UBICOM32FB_IOCTL_SET_NEXT_FRAME _IOW('r', 1, void *)
-#define UBICOM32FB_IOCTL_SET_NEXT_FRAME_SYNC _IOW('r', 2, void *)
-
-/*
- * Set Mode
- */
-#define UBICOM32FB_IOCTL_SET_MODE _IOW('r', 3, void *)
-struct ubicom32fb_mode {
- unsigned long width;
- unsigned long height;
- unsigned long flags;
- void *next_frame;
-};
-#define UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV_SCAN_ORDER (1 << 8)
-
-#define UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV_BLOCK_ORDER (1 << 7)
-#define UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV (1 << 6)
-#define UBICOM32FB_IOCTL_SET_MODE_FLAG_VSUB (1 << 5)
-#define UBICOM32FB_IOCTL_SET_MODE_FLAG_VRANGE_16_255 (1 << 4)
-
-#define UBICOM32FB_IOCTL_SET_MODE_FLAG_VRANGE_0_255 (1 << 3)
-#define UBICOM32FB_IOCTL_SET_MODE_FLAG_HSUB_2_1 (1 << 2)
-#define UBICOM32FB_IOCTL_SET_MODE_FLAG_HSUB_1_1 (1 << 1)
-#define UBICOM32FB_IOCTL_SET_MODE_FLAG_SCALE_ENABLE (1 << 0)
-
-#endif /* _ASM_UBICOM32_UBICOM32FB_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ubicom32hid.h
- * Ubicom32 architecture HID driver platform data definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_UBICOM32_HID_H
-#define _ASM_UBICOM32_UBICOM32_HID_H
-
-enum ubicom32hid_bl_types {
- /*
- * On or off, using command SET_BL_EN, PB4
- */
- UBICOM32HID_BL_TYPE_BINARY,
-
- /*
- * Dimmable, using command SET_PWM, PB3
- */
- UBICOM32HID_BL_TYPE_PWM,
-};
-
-/*
- * IR code mapping to event code.
- * If there are no button mappings and no ir mappings
- * then no input driver will be registered.
- */
-struct ubicom32hid_ir {
- /*
- * Input event code (KEY_*, SW_*, etc)
- */
- int code;
-
- /*
- * Input event type (EV_KEY, EV_SW, etc)
- */
- int type;
-
- /*
- * The IR code of this button.
- */
- uint32_t ir_code;
-};
-
-/*
- * Button mapping to event code.
- * If there are no button mappings and no ir mappings
- * then no input driver will be registered.
- */
-struct ubicom32hid_button {
- /*
- * Input event code (KEY_*, SW_*, etc)
- */
- int code;
-
- /*
- * Input event type (EV_KEY, EV_SW, etc)
- */
- int type;
-
- /*
- * Bit number of this button.
- */
- uint8_t bit;
-};
-
-struct ubicom32hid_platform_data {
- /*
- * Default intensity of the backlight 0-255
- */
- u8_t default_intensity;
-
- /*
- * GPIO number of the reset line and its polarity.
- */
- unsigned gpio_reset;
- int gpio_reset_polarity;
-
- /*
- * TRUE if the backlight sense is active low. (inverted)
- * FALSE if the backlight sense is active high.
- */
- bool invert;
-
- /*
- * Type of the backlight we are controlling
- */
- enum ubicom32hid_bl_types type;
-
- /*
- * Optional polling rate for input, in ms, defaults to 100ms
- */
- int poll_interval;
-
- /*
- * Optional name to register as input device
- */
- const char *input_name;
-
- /*
- * Button mapping array
- */
- const struct ubicom32hid_button *buttons;
- int nbuttons;
-
- /*
- * IR mapping array
- */
- const struct ubicom32hid_ir *ircodes;
- int nircodes;
-};
-
-#endif /* _ASM_UBICOM32_UBICOM32_HID_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ubicom32input.h
- * Ubicom32 Input driver, based on gpio-keys
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- *
- * TODO: add groups for inputs which can be sampled together
- */
-
-#ifndef _ASM_UBICOM32_UBICOM32_INPUT_H
-#define _ASM_UBICOM32_UBICOM32_INPUT_H
-
-struct ubicom32input_button {
- /*
- * Input event code (KEY_*, SW_*, etc)
- */
- int code;
-
- /*
- * Input event type (EV_KEY, EV_SW, etc)
- */
- int type;
-
- /*
- * GPIO to poll
- */
- int gpio;
-
- /*
- * 1 for active low, 0 for active high
- */
- int active_low;
-
- /*
- * Description, used for reserving GPIOs
- */
- const char *desc;
-};
-
-struct ubicom32input_platform_data {
- struct ubicom32input_button *buttons;
- int nbuttons;
-
- /*
- * Optional poll interval, in ms, defaults to 50ms
- */
- int poll_interval;
-
- /*
- * Option Name of this driver
- */
- const char *name;
-};
-
-#endif /* _ASM_UBICOM32_UBICOM32_INPUT_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ubicom32input_i2c.h
- * Ubicom32 architecture Input driver over I2C platform data definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- *
- * TODO: add groups for inputs which can be sampled together
- */
-
-#ifndef _ASM_UBICOM32_UBICOM32_INPUT_I2C_H
-#define _ASM_UBICOM32_UBICOM32_INPUT_I2C_H
-
-struct ubicom32input_i2c_button {
- /*
- * Input event code (KEY_*, SW_*, etc)
- */
- int code;
-
- /*
- * Input event type (EV_KEY, EV_SW, etc)
- */
- int type;
-
- /*
- * Bit number of this button. (0 - ngpio)
- */
- int bit;
-
- /*
- * 1 for active low, 0 for active high
- */
- int active_low;
-};
-
-struct ubicom32input_i2c_platform_data {
- struct ubicom32input_i2c_button *buttons;
- int nbuttons;
-
- /*
- * Optional poll interval, in ms, defaults to 100ms
- */
- int poll_interval;
-
- /*
- * Option Name of this driver
- */
- const char *name;
-};
-
-#endif /* _ASM_UBICOM32_UBICOM32_INPUT_I2C_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ubicom32lcd.h
- * Ubicom32 architecture LCD driver platform data definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-#ifndef _ASM_UBICOM32_UBICOM32_LCD_H
-#define _ASM_UBICOM32_UBICOM32_LCD_H
-
-#include <asm/ip5000.h>
-
-struct ubicom32lcd_platform_data {
- int pin_cs;
- int pin_rs;
- int pin_rd;
- int pin_wr;
- int pin_reset;
- int data_shift;
- struct ubicom32_io_port *port_data;
-};
-
-#endif /* _ASM_UBICOM32_UBICOM32_LCD_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ubicom32lcdpower.h
- * Ubicom32 architecture LCD driver platform data definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_UBICOM32_LCDPOWER_H
-#define _ASM_UBICOM32_UBICOM32_LCDPOWER_H
-
-struct ubicom32lcdpower_platform_data {
- /*
- * GPIO and polarity for VGH signal. A FALSE polarity is active low, TRUE is active high.
- */
- int vgh_gpio;
- bool vgh_polarity;
-};
-
-#endif /* _ASM_UBICOM32_UBICOM32_LCDPOWER_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ubicom32ring.h
- * Userspace I/O platform driver for Ubicom32 ring buffers
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef _ASM_UBICOM32_UBICOM32RING_H
-#define _ASM_UBICOM32_UBICOM32RING_H
-
-#define UIO_UBICOM32RING_REG_VERSION 2
-
-struct uio_ubicom32ring_desc {
- volatile unsigned int head;
- volatile unsigned int tail;
- unsigned int entries;
- volatile unsigned int ring[0];
-};
-
-struct uio_ubicom32ring_regs {
- unsigned int version;
-
- /*
- * Magic type used to identify the ring set. Each driver will
- * have a different magic value.
- */
- unsigned int magic;
-
- /*
- * Registers defined by the driver
- */
- unsigned int regs_size;
- void *regs;
-
- /*
- * The locations of the rings
- *
- * DO NOT ADD ANYTHING BELOW THIS LINE
- */
- unsigned int num_rings;
- struct uio_ubicom32ring_desc *rings[0];
-};
-
-/*
- * ringtio_ring_flush
- */
-static inline void ringtio_ring_flush(struct uio_ubicom32ring_desc *rd)
-{
- rd->head = rd->tail = 0;
-}
-
-/*
- * ringtio_ring_get
- */
-static inline int ringtio_ring_get(struct uio_ubicom32ring_desc *rd, void **val)
-{
- if (rd->head == rd->tail) {
- return 0;
- }
-
- *val = (void *)rd->ring[rd->head++];
- if (rd->head == rd->entries) {
- rd->head = 0;
- }
- return 1;
-}
-
-/*
- * ringtio_ring_put
- */
-static inline int ringtio_ring_put(struct uio_ubicom32ring_desc *rd, void *val)
-{
- unsigned int newtail = rd->tail + 1;
- if (newtail == rd->entries) {
- newtail = 0;
- }
-
- if (newtail == rd->head) {
- return 0;
- }
-
- rd->ring[rd->tail] = (unsigned int)val;
- rd->tail = newtail;
- return 1;
-}
-
-#endif /* _ASM_UBICOM32_UBICOM32RING_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ubicom32sd.h
- * Ubicom32SD public include file
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-#ifndef _ASM_UBICOM32_UBICOM32_SD_H
-#define _ASM_UBICOM32_UBICOM32_SD_H
-
-struct ubicom32sd_card {
- /*
- * GPIOs of PWR, WP and CD lines.
- * Polarity is 1 for active high and 0 for active low
- */
- int pin_pwr;
- bool pwr_polarity;
- int pin_wp;
- bool wp_polarity;
- int pin_cd;
- bool cd_polarity;
-};
-
-struct ubicom32sd_platform_data {
- int ncards;
-
- struct ubicom32sd_card *cards;
-};
-
-#endif /* _ASM_UBICOM32_UBICOM32_SD_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ubicom32suart.h
- * <TODO: Replace with short file description>
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_UBICOM32_SUART_H
-#define _ASM_UBICOM32_UBICOM32_SUART_H
-
-/*
- * Platform resource id for serdes uart clock parameter
- */
-#define UBICOM32_SUART_IORESOURCE_CLOCK (1)
-
-#endif /* _ASM_UBICOM32_UBICOM32_SUART_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/ucontext.h
- * Definition of ucontext structure for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_UCONTEXT_H
-#define _ASM_UBICOM32_UCONTEXT_H
-
-struct ucontext {
- unsigned long uc_flags;
- struct ucontext *uc_link;
- stack_t uc_stack;
- struct sigcontext uc_mcontext;
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
-
-#endif /* _ASM_UBICOM32_UCONTEXT_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/unaligned.h
- * Ubicom32 architecture unaligned memory access definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- *
- * TODO: This is a copy of arm unaligned handling that probably needs
- * to be optimized for UBICOM32, but it works for now.
- */
-
-#ifndef _ASM_UBICOM32_UNALIGNED_H
-#define _ASM_UBICOM32_UNALIGNED_H
-
-#include <asm/types.h>
-
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/be_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned __get_unaligned_be
-#define put_unaligned __put_unaligned_be
-
-#endif /* _ASM_UBICOM32_UNALIGNED_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/unistd.h
- * Ubicom32 architecture syscall definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_UNISTD_H
-#define _ASM_UBICOM32_UNISTD_H
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall 0
-#define __NR_exit 1
-#define __NR_fork 2
-#define __NR_read 3
-#define __NR_write 4
-#define __NR_open 5
-#define __NR_close 6
-#define __NR_waitpid 7
-#define __NR_creat 8
-#define __NR_link 9
-#define __NR_unlink 10
-#define __NR_execve 11
-#define __NR_chdir 12
-#define __NR_time 13
-#define __NR_mknod 14
-#define __NR_chmod 15
-#define __NR_chown 16
-#define __NR_break 17
-#define __NR_oldstat 18
-#define __NR_lseek 19
-#define __NR_getpid 20
-#define __NR_mount 21
-#define __NR_umount 22
-#define __NR_setuid 23
-#define __NR_getuid 24
-#define __NR_stime 25
-#define __NR_ptrace 26
-#define __NR_alarm 27
-#define __NR_oldfstat 28
-#define __NR_pause 29
-#define __NR_utime 30
-#define __NR_stty 31
-#define __NR_gtty 32
-#define __NR_access 33
-#define __NR_nice 34
-#define __NR_ftime 35
-#define __NR_sync 36
-#define __NR_kill 37
-#define __NR_rename 38
-#define __NR_mkdir 39
-#define __NR_rmdir 40
-#define __NR_dup 41
-#define __NR_pipe 42
-#define __NR_times 43
-#define __NR_prof 44
-#define __NR_brk 45
-#define __NR_setgid 46
-#define __NR_getgid 47
-#define __NR_signal 48
-#define __NR_geteuid 49
-#define __NR_getegid 50
-#define __NR_acct 51
-#define __NR_umount2 52
-#define __NR_lock 53
-#define __NR_ioctl 54
-#define __NR_fcntl 55
-#define __NR_mpx 56
-#define __NR_setpgid 57
-#define __NR_ulimit 58
-#define __NR_oldolduname 59
-#define __NR_umask 60
-#define __NR_chroot 61
-#define __NR_ustat 62
-#define __NR_dup2 63
-#define __NR_getppid 64
-#define __NR_getpgrp 65
-#define __NR_setsid 66
-#define __NR_sigaction 67
-#define __NR_sgetmask 68
-#define __NR_ssetmask 69
-#define __NR_setreuid 70
-#define __NR_setregid 71
-#define __NR_sigsuspend 72
-#define __NR_sigpending 73
-#define __NR_sethostname 74
-#define __NR_setrlimit 75
-#define __NR_getrlimit 76
-#define __NR_getrusage 77
-#define __NR_gettimeofday 78
-#define __NR_settimeofday 79
-#define __NR_getgroups 80
-#define __NR_setgroups 81
-#define __NR_select 82
-#define __NR_symlink 83
-#define __NR_oldlstat 84
-#define __NR_readlink 85
-#define __NR_uselib 86
-#define __NR_swapon 87
-#define __NR_reboot 88
-#define __NR_readdir 89
-#define __NR_mmap 90
-#define __NR_munmap 91
-#define __NR_truncate 92
-#define __NR_ftruncate 93
-#define __NR_fchmod 94
-#define __NR_fchown 95
-#define __NR_getpriority 96
-#define __NR_setpriority 97
-#define __NR_profil 98
-#define __NR_statfs 99
-#define __NR_fstatfs 100
-#define __NR_ioperm 101
-#define __NR_socketcall 102
-#define __NR_syslog 103
-#define __NR_setitimer 104
-#define __NR_getitimer 105
-#define __NR_stat 106
-#define __NR_lstat 107
-#define __NR_fstat 108
-#define __NR_olduname 109
-#define __NR_iopl /* 110 */ not supported
-#define __NR_vhangup 111
-#define __NR_idle /* 112 */ Obsolete
-#define __NR_vm86 /* 113 */ not supported
-#define __NR_wait4 114
-#define __NR_swapoff 115
-#define __NR_sysinfo 116
-#define __NR_ipc 117
-#define __NR_fsync 118
-#define __NR_sigreturn 119
-#define __NR_clone 120
-#define __NR_setdomainname 121
-#define __NR_uname 122
-#define __NR_cacheflush 123
-#define __NR_adjtimex 124
-#define __NR_mprotect 125
-#define __NR_sigprocmask 126
-#define __NR_create_module 127
-#define __NR_init_module 128
-#define __NR_delete_module 129
-#define __NR_get_kernel_syms 130
-#define __NR_quotactl 131
-#define __NR_getpgid 132
-#define __NR_fchdir 133
-#define __NR_bdflush 134
-#define __NR_sysfs 135
-#define __NR_personality 136
-#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
-#define __NR_setfsuid 138
-#define __NR_setfsgid 139
-#define __NR__llseek 140
-#define __NR_getdents 141
-#define __NR__newselect 142
-#define __NR_flock 143
-#define __NR_msync 144
-#define __NR_readv 145
-#define __NR_writev 146
-#define __NR_getsid 147
-#define __NR_fdatasync 148
-#define __NR__sysctl 149
-#define __NR_mlock 150
-#define __NR_munlock 151
-#define __NR_mlockall 152
-#define __NR_munlockall 153
-#define __NR_sched_setparam 154
-#define __NR_sched_getparam 155
-#define __NR_sched_setscheduler 156
-#define __NR_sched_getscheduler 157
-#define __NR_sched_yield 158
-#define __NR_sched_get_priority_max 159
-#define __NR_sched_get_priority_min 160
-#define __NR_sched_rr_get_interval 161
-#define __NR_nanosleep 162
-#define __NR_mremap 163
-#define __NR_setresuid 164
-#define __NR_getresuid 165
-#define __NR_getpagesize 166
-#define __NR_query_module 167
-#define __NR_poll 168
-#define __NR_nfsservctl 169
-#define __NR_setresgid 170
-#define __NR_getresgid 171
-#define __NR_prctl 172
-#define __NR_rt_sigreturn 173
-#define __NR_rt_sigaction 174
-#define __NR_rt_sigprocmask 175
-#define __NR_rt_sigpending 176
-#define __NR_rt_sigtimedwait 177
-#define __NR_rt_sigqueueinfo 178
-#define __NR_rt_sigsuspend 179
-#define __NR_pread64 180
-#define __NR_pwrite64 181
-#define __NR_lchown 182
-#define __NR_getcwd 183
-#define __NR_capget 184
-#define __NR_capset 185
-#define __NR_sigaltstack 186
-#define __NR_sendfile 187
-#define __NR_getpmsg 188 /* some people actually want streams */
-#define __NR_putpmsg 189 /* some people actually want streams */
-#define __NR_vfork 190
-#define __NR_ugetrlimit 191
-#define __NR_mmap2 192
-#define __NR_truncate64 193
-#define __NR_ftruncate64 194
-#define __NR_stat64 195
-#define __NR_lstat64 196
-#define __NR_fstat64 197
-#define __NR_chown32 198
-#define __NR_getuid32 199
-#define __NR_getgid32 200
-#define __NR_geteuid32 201
-#define __NR_getegid32 202
-#define __NR_setreuid32 203
-#define __NR_setregid32 204
-#define __NR_getgroups32 205
-#define __NR_setgroups32 206
-#define __NR_fchown32 207
-#define __NR_setresuid32 208
-#define __NR_getresuid32 209
-#define __NR_setresgid32 210
-#define __NR_getresgid32 211
-#define __NR_lchown32 212
-#define __NR_setuid32 213
-#define __NR_setgid32 214
-#define __NR_setfsuid32 215
-#define __NR_setfsgid32 216
-#define __NR_pivot_root 217
-#define __NR_getdents64 220
-#define __NR_gettid 221
-#define __NR_tkill 222
-#define __NR_setxattr 223
-#define __NR_lsetxattr 224
-#define __NR_fsetxattr 225
-#define __NR_getxattr 226
-#define __NR_lgetxattr 227
-#define __NR_fgetxattr 228
-#define __NR_listxattr 229
-#define __NR_llistxattr 230
-#define __NR_flistxattr 231
-#define __NR_removexattr 232
-#define __NR_lremovexattr 233
-#define __NR_fremovexattr 234
-#define __NR_futex 235
-#define __NR_sendfile64 236
-#define __NR_mincore 237
-#define __NR_madvise 238
-#define __NR_fcntl64 239
-#define __NR_readahead 240
-#define __NR_io_setup 241
-#define __NR_io_destroy 242
-#define __NR_io_getevents 243
-#define __NR_io_submit 244
-#define __NR_io_cancel 245
-#define __NR_fadvise64 246
-#define __NR_exit_group 247
-#define __NR_lookup_dcookie 248
-#define __NR_epoll_create 249
-#define __NR_epoll_ctl 250
-#define __NR_epoll_wait 251
-#define __NR_remap_file_pages 252
-#define __NR_set_tid_address 253
-#define __NR_timer_create 254
-#define __NR_timer_settime 255
-#define __NR_timer_gettime 256
-#define __NR_timer_getoverrun 257
-#define __NR_timer_delete 258
-#define __NR_clock_settime 259
-#define __NR_clock_gettime 260
-#define __NR_clock_getres 261
-#define __NR_clock_nanosleep 262
-#define __NR_statfs64 263
-#define __NR_fstatfs64 264
-#define __NR_tgkill 265
-#define __NR_utimes 266
-#define __NR_fadvise64_64 267
-#define __NR_mbind 268
-#define __NR_get_mempolicy 269
-#define __NR_set_mempolicy 270
-#define __NR_mq_open 271
-#define __NR_mq_unlink 272
-#define __NR_mq_timedsend 273
-#define __NR_mq_timedreceive 274
-#define __NR_mq_notify 275
-#define __NR_mq_getsetattr 276
-#define __NR_waitid 277
-#define __NR_vserver 278
-#define __NR_add_key 279
-#define __NR_request_key 280
-#define __NR_keyctl 281
-#define __NR_ioprio_set 282
-#define __NR_ioprio_get 283
-#define __NR_inotify_init 284
-#define __NR_inotify_add_watch 285
-#define __NR_inotify_rm_watch 286
-#define __NR_migrate_pages 287
-#define __NR_openat 288
-#define __NR_mkdirat 289
-#define __NR_mknodat 290
-#define __NR_fchownat 291
-#define __NR_futimesat 292
-#define __NR_fstatat64 293
-#define __NR_unlinkat 294
-#define __NR_renameat 295
-#define __NR_linkat 296
-#define __NR_symlinkat 297
-#define __NR_readlinkat 298
-#define __NR_fchmodat 299
-#define __NR_faccessat 300
-#define __NR_pselect6 301
-#define __NR_ppoll 302
-#define __NR_unshare 303
-#define __NR_set_robust_list 304
-#define __NR_get_robust_list 305
-#define __NR_splice 306
-#define __NR_sync_file_range 307
-#define __NR_tee 308
-#define __NR_vmsplice 309
-#define __NR_move_pages 310
-#define __NR_sched_setaffinity 311
-#define __NR_sched_getaffinity 312
-#define __NR_kexec_load 313
-#define __NR_getcpu 314
-#define __NR_epoll_pwait 315
-#define __NR_utimensat 316
-#define __NR_signalfd 317
-#define __NR_timerfd_create 318
-#define __NR_eventfd 319
-#define __NR_fallocate 320
-#define __NR_timerfd_settime 321
-#define __NR_timerfd_gettime 322
-#define __NR_signalfd4 323
-#define __NR_eventfd2 324
-#define __NR_epoll_create1 325
-#define __NR_dup3 326
-#define __NR_pipe2 327
-#define __NR_inotify_init1 328
-
-#ifdef __KERNEL__
-
-#define NR_syscalls 329
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-//#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-#define cond_syscall(x) long x(void) __attribute__((weak,alias("sys_ni_syscall")))
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_UBICOM32_UNISTD_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/user.h
- * Ubicom32 architecture core file definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_USER_H
-#define _ASM_UBICOM32_USER_H
-
-#include <asm/ptrace.h>
-#include <asm/page.h>
-/*
- * Adapted from <asm-powerpc/user.h>
- *
- * Core file format: The core file is written in such a way that gdb
- * can understand it and provide useful information to the user (under
- * linux we use the `trad-core' bfd, NOT the osf-core). The file contents
- * are as follows:
- *
- * upage: 1 page consisting of a user struct that tells gdb
- * what is present in the file. Directly after this is a
- * copy of the task_struct, which is currently not used by gdb,
- * but it may come in handy at some point. All of the registers
- * are stored as part of the upage. The upage should always be
- * only one page long.
- * data: The data segment follows next. We use current->end_text to
- * current->brk to pick up all of the user variables, plus any memory
- * that may have been sbrk'ed. No attempt is made to determine if a
- * page is demand-zero or if a page is totally unused, we just cover
- * the entire range. All of the addresses are rounded in such a way
- * that an integral number of pages is written.
- * stack: We need the stack information in order to get a meaningful
- * backtrace. We need to write the data from usp to
- * current->start_stack, so we round each of these in order to be able
- * to write an integer number of pages.
- */
-
-struct user_ubicom32fp_struct {
-};
-
-struct user {
- struct pt_regs regs; /* entire machine state */
- size_t u_tsize; /* text size (pages) */
- size_t u_dsize; /* data size (pages) */
- size_t u_ssize; /* stack size (pages) */
- unsigned long start_code; /* text starting address */
- unsigned long start_data; /* data starting address */
- unsigned long start_stack; /* stack starting address */
- long int signal; /* signal causing core dump */
- unsigned long u_ar0; /* help gdb find registers */
- unsigned long magic; /* identifies a core file */
- char u_comm[32]; /* user command name */
-};
-
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_DATA_START_ADDR (u.start_data)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif /* _ASM_UBICOM32_USER_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/vdc_tio.h
- * Ubicom32 architecture VDC TIO definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_VDC_TIO_H
-#define _ASM_UBICOM32_VDC_TIO_H
-
-#include <asm/devtree.h>
-
-#define VDCTIO_VP_VERSION 5
-
-#define VDCTIO_SCALE_FLAG_VSUB (1 << 9)
-#define VDCTIO_SCALE_FLAG_YUV_SCAN_ORDER (1 << 8)
-#define VDCTIO_SCALE_FLAG_YUV_BLOCK_ORDER (1 << 7)
-#define VDCTIO_SCALE_FLAG_YUV (1 << 6)
-#define VDCTIO_SCALE_FLAG_VRANGE_16_255 (1 << 5)
-#define VDCTIO_SCALE_FLAG_VRANGE_0_255 (1 << 4)
-#define VDCTIO_SCALE_FLAG_HSUB_2_1 (1 << 3)
-#define VDCTIO_SCALE_FLAG_HSUB_1_1 (1 << 2)
-#define VDCTIO_SCALE_FLAG_SET_FRAME_BUFFER (1 << 1)
-#define VDCTIO_SCALE_FLAG_ENABLE (1 << 0)
-
-#define VDCTIO_NEXT_FRAME_FLAG_YUV_BIT 0
-#define VDCTIO_NEXT_FRAME_FLAG_YUV (1 << (VDCTIO_NEXT_FRAME_FLAG_YUV_BIT))
-
-#define VDCTIO_CAPS_SUPPORTS_SCALING (1 << 0)
-
-#define VDCTIO_COMMAND_START (1 << 3)
-#define VDCTIO_COMMAND_SET_COEFF (1 << 2)
-#define VDCTIO_COMMAND_SET_LUT (1 << 1)
-#define VDCTIO_COMMAND_SET_SCALE_MODE (1 << 0)
-
-/*
- * Command / Data registers to access the VDC
- */
-struct vdc_tio_vp_regs {
- /*
- * Version of this TIO register map
- */
- u32_t version;
-
- volatile u32_t command;
-
- /*
- * Next frame pointer, when the command VDCTIO_COMMAND_SET_FRAME_BUFFER is set,
- * the vdc will take the pointer here and display it.
- */
- void *next_frame;
- u32_t next_frame_flags;
-
- /*
- * These map directly into the PIXP registers 0x20-0x80.
- * DO NOT change the order of these three variables.
- */
- u32_t red_lut[6];
- u32_t blue_lut[6];
- u32_t green_lut[13];
-
- /*
- * These map directly into the PIXP registers 0x04, 0x08
- */
- u32_t coeff0;
- u32_t coeff1;
-
- /*
- * There are used to set the scaling parameters
- */
- u32_t x_in;
- u32_t x_out;
- u32_t y_in;
- u32_t y_out;
- u32_t scale_flags;
-
- /*
- * Current frame number, monotonically increasing number
- */
- u32_t frame_number;
-
- /*
- * These variables tell the guest OS what the underlying hardware looks like
- */
- u32_t caps;
- u32_t xres;
- u32_t yres;
- u32_t fb_align;
- u8_t bpp;
- u8_t rbits;
- u8_t gbits;
- u8_t bbits;
- u8_t rshift;
- u8_t gshift;
- u8_t bshift;
-};
-
-/*
- * Devtree node for VDC
- */
-struct vdc_tio_node {
- struct devtree_node dn;
-
- struct vdc_tio_vp_regs *regs;
-};
-
-extern void vdc_tio_init(void);
-
-#endif /* _ASM_UBICOM32_VDC_TIO_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/vga.h
- * Ubicom32 low level VGA/frame buffer definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * (c) 1998 Martin Mares <mj@ucw.cz>
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#ifndef _ASM_UBICOM32_VGA_H
-#define _ASM_UBICOM32_VGA_H
-
-#include <asm/byteorder.h>
-
-/*
- * On the PC, we can just recalculate addresses and then
- * access the videoram directly without any black magic.
- */
-
-#define VGA_MAP_MEM(x, s) (0xb0000000L + (unsigned long)(x))
-
-#define vga_readb(x) (*(x))
-#define vga_writeb(x, y) (*(y) = (x))
-
-#define VT_BUF_HAVE_RW
-/*
- * These are only needed for supporting VGA or MDA text mode, which use little
- * endian byte ordering.
- * In other cases, we can optimize by using native byte ordering and
- * <linux/vt_buffer.h> has already done the right job for us.
- */
-
-#undef scr_writew
-#undef scr_readw
-
-static inline void scr_writew(u16 val, volatile u16 *addr)
-{
- *addr = cpu_to_le16(val);
-}
-
-static inline u16 scr_readw(volatile const u16 *addr)
-{
- return le16_to_cpu(*addr);
-}
-
-#define scr_memcpyw(d, s, c) memcpy(d, s, c)
-#define scr_memmovew(d, s, c) memmove(d, s, c)
-#define VT_BUF_HAVE_MEMCPYW
-#define VT_BUF_HAVE_MEMMOVEW
-
-#endif /* _ASM_UBICOM32_VGA_H */
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/xor.h
- * Generic xor.h definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _ASM_UBICOM32_XOR_H
-#define _ASM_UBICOM32_XOR_H
-
-#include <asm-generic/xor.h>
-
-#endif /* _ASM_UBICOM32_XOR_H */
+++ /dev/null
-#
-# arch/ubicom32/kernel/Makefile
-# Main Makefile for the Ubicom32 arch directory.
-#
-# (C) Copyright 2009, Ubicom, Inc.
-#
-# This file is part of the Ubicom32 Linux Kernel Port.
-#
-# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-# it and/or modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation, either version 2 of the
-# License, or (at your option) any later version.
-#
-# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with the Ubicom32 Linux Kernel Port. If not,
-# see <http://www.gnu.org/licenses/>.
-#
-# Ubicom32 implementation derived from (with many thanks):
-# arch/m68knommu
-# arch/blackfin
-# arch/parisc
-#
-
-extra-y := head.o vmlinux.lds
-
-obj-y += \
- devtree.o \
- dma.o \
- flat.o \
- init_task.o \
- irq.o \
- ldsr.o \
- os_node.o \
- process.o \
- processor.o \
- ptrace.o \
- setup.o \
- signal.o \
- stacktrace.o \
- sys_ubicom32.o \
- syscalltable.o \
- thread.o \
- time.o \
- traps.o \
- ubicom32_context_switch.o \
- ubicom32_ksyms.o \
- ubicom32_syscall.o \
- unaligned_trap.o
-
-obj-$(CONFIG_MODULES) += module.o
-obj-$(CONFIG_COMEMPCI) += comempci.o
-obj-$(CONFIG_SMP) += smp.o topology.o
-obj-$(CONFIG_ACCESS_OK_CHECKS_ENABLED) += uaccess.o
-obj-$(CONFIG_GENERIC_CLOCKEVENTS) += timer_device.o
-obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += timer_broadcast.o
-
-ifndef CONFIG_GENERIC_CLOCKEVENTS
-obj-y += timer_tick.o
-endif
+++ /dev/null
-/*
- * arch/ubicom32/kernel/asm-offsets.c
- * Ubicom32 architecture definitions needed by assembly language modules.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#include <linux/module.h>
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/ptrace.h>
-#include <linux/hardirq.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/thread_info.h>
-
-#define DEFINE(sym, val) \
- asm volatile("\n->" #sym " %0 " #val : : "i" (val))
-
-#define BLANK() asm volatile("\n->" : : )
-
-int main(void)
-{
- /* offsets into the task struct */
- DEFINE(TASK_STATE, offsetof(struct task_struct, state));
- DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
- DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
- DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
- DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
- DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack));
- DEFINE(TASK_MM, offsetof(struct task_struct, mm));
- DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
-
- /* offsets into the kernel_stat struct */
-// DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
-
- /* offsets into the irq_cpustat_t struct */
- DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
-
- /* offsets into the thread struct */
- DEFINE(THREAD_D10, offsetof(struct thread_struct, d10));
- DEFINE(THREAD_D11, offsetof(struct thread_struct, d11));
- DEFINE(THREAD_D12, offsetof(struct thread_struct, d12));
- DEFINE(THREAD_D13, offsetof(struct thread_struct, d13));
- DEFINE(THREAD_A1, offsetof(struct thread_struct, a1));
- DEFINE(THREAD_A2, offsetof(struct thread_struct, a2));
- DEFINE(THREAD_A5, offsetof(struct thread_struct, a5));
- DEFINE(THREAD_A6, offsetof(struct thread_struct, a6));
- DEFINE(THREAD_SP, offsetof(struct thread_struct, sp));
-
- /* offsets into the pt_regs */
- DEFINE(PT_D0, offsetof(struct pt_regs, dn[0]));
- DEFINE(PT_D1, offsetof(struct pt_regs, dn[1]));
- DEFINE(PT_D2, offsetof(struct pt_regs, dn[2]));
- DEFINE(PT_D3, offsetof(struct pt_regs, dn[3]));
- DEFINE(PT_D4, offsetof(struct pt_regs, dn[4]));
- DEFINE(PT_D5, offsetof(struct pt_regs, dn[5]));
- DEFINE(PT_D6, offsetof(struct pt_regs, dn[6]));
- DEFINE(PT_D7, offsetof(struct pt_regs, dn[7]));
- DEFINE(PT_D8, offsetof(struct pt_regs, dn[8]));
- DEFINE(PT_D9, offsetof(struct pt_regs, dn[9]));
- DEFINE(PT_D10, offsetof(struct pt_regs, dn[10]));
- DEFINE(PT_D11, offsetof(struct pt_regs, dn[11]));
- DEFINE(PT_D12, offsetof(struct pt_regs, dn[12]));
- DEFINE(PT_D13, offsetof(struct pt_regs, dn[13]));
- DEFINE(PT_D14, offsetof(struct pt_regs, dn[14]));
- DEFINE(PT_D15, offsetof(struct pt_regs, dn[15]));
- DEFINE(PT_A0, offsetof(struct pt_regs, an[0]));
- DEFINE(PT_A1, offsetof(struct pt_regs, an[1]));
- DEFINE(PT_A2, offsetof(struct pt_regs, an[2]));
- DEFINE(PT_A3, offsetof(struct pt_regs, an[3]));
- DEFINE(PT_A4, offsetof(struct pt_regs, an[4]));
- DEFINE(PT_A5, offsetof(struct pt_regs, an[5]));
- DEFINE(PT_A6, offsetof(struct pt_regs, an[6]));
- DEFINE(PT_A7, offsetof(struct pt_regs, an[7]));
- DEFINE(PT_SP, offsetof(struct pt_regs, an[7]));
-
- DEFINE(PT_ACC0HI, offsetof(struct pt_regs, acc0[0]));
- DEFINE(PT_ACC0LO, offsetof(struct pt_regs, acc0[1]));
- DEFINE(PT_MAC_RC16, offsetof(struct pt_regs, mac_rc16));
-
- DEFINE(PT_ACC1HI, offsetof(struct pt_regs, acc1[0]));
- DEFINE(PT_ACC1LO, offsetof(struct pt_regs, acc1[1]));
-
- DEFINE(PT_SOURCE3, offsetof(struct pt_regs, source3));
- DEFINE(PT_INST_CNT, offsetof(struct pt_regs, inst_cnt));
- DEFINE(PT_CSR, offsetof(struct pt_regs, csr));
- DEFINE(PT_DUMMY_UNUSED, offsetof(struct pt_regs, dummy_unused));
-
- DEFINE(PT_INT_MASK0, offsetof(struct pt_regs, int_mask0));
- DEFINE(PT_INT_MASK1, offsetof(struct pt_regs, int_mask1));
-
- DEFINE(PT_PC, offsetof(struct pt_regs, pc));
-
- DEFINE(PT_TRAP_CAUSE, offsetof(struct pt_regs, trap_cause));
-
- DEFINE(PT_SIZE, sizeof(struct pt_regs));
-
- DEFINE(PT_FRAME_TYPE, offsetof(struct pt_regs, frame_type));
-
- DEFINE(PT_ORIGINAL_D0, offsetof(struct pt_regs, original_dn_0));
- DEFINE(PT_PREVIOUS_PC, offsetof(struct pt_regs, previous_pc));
-
- /* offsets into the kernel_stat struct */
-// DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
-
- /* signal defines */
- DEFINE(SIGSEGV, SIGSEGV);
- //DEFINE(SEGV_MAPERR, SEGV_MAPERR);
- DEFINE(SIGTRAP, SIGTRAP);
- //DEFINE(TRAP_TRACE, TRAP_TRACE);
-
- DEFINE(PT_PTRACED, PT_PTRACED);
- DEFINE(PT_DTRACE, PT_DTRACE);
-
- DEFINE(ASM_THREAD_SIZE, THREAD_SIZE);
-
- /* Offsets in thread_info structure */
- DEFINE(TI_TASK, offsetof(struct thread_info, task));
- DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
- DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
- DEFINE(TI_PREEMPTCOUNT, offsetof(struct thread_info, preempt_count));
- DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
- DEFINE(TI_INTR_NESTING, offsetof(struct thread_info, interrupt_nesting));
- DEFINE(ASM_TIF_NEED_RESCHED, TIF_NEED_RESCHED);
- DEFINE(ASM_TIF_SYSCALL_TRACE, TIF_SYSCALL_TRACE);
- DEFINE(ASM_TIF_SIGPENDING, TIF_SIGPENDING);
-
- return 0;
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/devtree.c
- * Ubicom32 architecture device tree implementation.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <asm/devtree.h>
-
-/*
- * The device tree.
- */
-struct devtree_node *devtree;
-
-/*
- * devtree_print()
- * Print the device tree.
- */
-void devtree_print(void)
-{
- struct devtree_node *p = devtree;
- printk(KERN_INFO "Device Tree:\n");
- while (p) {
- if (p->magic != DEVTREE_NODE_MAGIC) {
- printk(KERN_EMERG
- "device tree has improper node: %p\n", p);
- return;
- }
- printk(KERN_INFO "\t%p: sendirq=%03d, recvirq=%03d, "
- " name=%s\n", p, p->sendirq, p->recvirq, p->name);
- p = p->next;
- }
-}
-EXPORT_SYMBOL(devtree_print);
-
-/*
- * devtree_irq()
- * Return the IRQ(s) associated with devtree node.
- */
-int devtree_irq(struct devtree_node *dn,
- unsigned char *sendirq,
- unsigned char *recvirq)
-{
- if (dn->magic != DEVTREE_NODE_MAGIC) {
- printk(KERN_EMERG "improper node: %p\n", dn);
- if (sendirq) {
- *sendirq = DEVTREE_IRQ_NONE;
- }
- if (recvirq) {
- *recvirq = DEVTREE_IRQ_NONE;
- }
- return -EFAULT;
- }
-
- /*
- * Copy the devtree irq(s) to the output parameters.
- */
- if (sendirq) {
- *sendirq = dn->sendirq;
- }
- if (recvirq) {
- *recvirq = dn->recvirq;
- }
- return 0;
-}
-EXPORT_SYMBOL(devtree_irq);
-
-/*
- * devtree_find_next()
- * Provide an iterator for walking the device tree.
- */
-struct devtree_node *devtree_find_next(struct devtree_node **cur)
-{
- struct devtree_node *p = *cur;
- if (!p) {
- *cur = devtree;
- return devtree;
- }
- p = p->next;
- *cur = p;
- return p;
-}
-
-/*
- * devtree_find_by_irq()
- * Return the node associated with a given irq.
- */
-struct devtree_node *devtree_find_by_irq(uint8_t sendirq, uint8_t recvirq)
-{
- struct devtree_node *p = devtree;
-
- if (sendirq == recvirq) {
- printk(KERN_EMERG "identical request makes no sense sendirq = "
- "%d, recvirq= %d\n", sendirq, recvirq);
- return NULL;
- }
-
- while (p) {
- if (p->magic != DEVTREE_NODE_MAGIC) {
- printk(KERN_EMERG
- "device tree has improper node: %p\n", p);
- return NULL;
- }
-
- /*
- * See if we can find a match on the IRQ(s) specified.
- */
- if ((sendirq == p->sendirq) && (recvirq == p->recvirq)) {
- return p;
- }
-
- if ((sendirq == DEVTREE_IRQ_DONTCARE) &&
- (p->recvirq == recvirq)) {
- return p;
- }
-
- if ((recvirq == DEVTREE_IRQ_DONTCARE) &&
- (p->sendirq == sendirq)) {
- return p;
- }
-
- p = p->next;
- }
- return NULL;
-}
-EXPORT_SYMBOL(devtree_find_by_irq);
-
-/*
- * devtree_find_node()
- * Find a node in the device tree by name.
- */
-struct devtree_node *devtree_find_node(const char *str)
-{
- struct devtree_node *p = devtree;
- while (p) {
- if (p->magic != DEVTREE_NODE_MAGIC) {
- printk(KERN_EMERG
- "device tree has improper node: %p\n", p);
- return NULL;
- }
- if (strcmp(p->name, str) == 0) {
- return p;
- }
- p = p->next;
- }
- return NULL;
-}
-EXPORT_SYMBOL(devtree_find_node);
+++ /dev/null
-/*
- * arch/ubicom32/kernel/dma.c
- * Ubicom32 architecture dynamic DMA mapping support.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- *
- * We never have any address translations to worry about, so this
- * is just alloc/free.
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int gfp)
-{
- void *ret;
- /* ignore region specifiers */
- gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
-
- if (dev == NULL || (*dev->dma_mask < 0xffffffff))
- gfp |= GFP_DMA;
- ret = (void *)__get_free_pages(gfp, get_order(size));
-
- if (ret != NULL) {
- memset(ret, 0, size);
- *dma_handle = virt_to_phys(ret);
- }
- return ret;
-}
-
-void dma_free_coherent(struct device *dev, size_t size,
- void *vaddr, dma_addr_t dma_handle)
-{
- free_pages((unsigned long)vaddr, get_order(size));
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/flat.c
- * Ubicom32 architecture flat executable format support.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/flat.h>
-
-unsigned long ubicom32_flat_get_addr_from_rp(unsigned long *rp,
- u32_t relval,
- u32_t flags,
- unsigned long *persistent)
-{
- u32_t relval_reloc_type = relval >> 27;
- u32_t insn = *rp;
-
- if (*persistent) {
- /*
- * relval holds the relocation that has to be adjusted.
- */
- if (relval == 0) {
- *persistent = 0;
- }
-
- return relval;
- }
-
- if (relval_reloc_type == R_UBICOM32_32) {
- /*
- * insn holds the relocation
- */
- return insn;
- }
-
- /*
- * We don't know this one.
- */
- return 0;
-}
-
-void ubicom32_flat_put_addr_at_rp(unsigned long *rp,
- u32_t val,
- u32_t relval,
- unsigned long *persistent)
-{
- u32_t reloc_type = (relval >> 27) & 0x1f;
- u32_t insn = *rp;
-
- /*
- * If persistent is set then it contains the relocation type.
- */
- if (*persistent) {
- /*
- * If persistent is set then it contains the relocation type.
- */
- reloc_type = (*persistent >> 27) & 0x1f;
- }
-
- switch (reloc_type) {
- case R_UBICOM32_32:
- /*
- * Store the 32 bits as is.
- */
- *rp = val;
- break;
- case R_UBICOM32_HI24:
- {
- /*
- * 24 bit relocation that is part of the MOVEAI
- * instruction. The 24 bits come from bits 7 - 30 of the
- * relocation. The 24 bits eventually get split into 2
- * fields in the instruction encoding.
- *
- * - Bits 7 - 27 of the relocation are encoded into bits
- * 0 - 20 of the instruction.
- *
- * - Bits 28 - 30 of the relocation are encoded into bit
- * 24 - 26 of the instruction.
- */
- u32_t mask = 0x1fffff | (0x7 << 24);
- u32_t valid24bits = (val >> 7) & 0xffffff;
- u32_t bot_21 = valid24bits & 0x1fffff;
- u32_t upper_3_bits = ((valid24bits & 0xe00000) << 3);
- insn &= ~mask;
-
- insn |= bot_21;
- insn |= upper_3_bits;
- *rp = insn;
- }
- break;
- case R_UBICOM32_LO7_S:
- case R_UBICOM32_LO7_2_S:
- case R_UBICOM32_LO7_4_S:
- {
- /*
- * Bits 0 - 6 of the relocation are encoded into the
- * 7bit unsigned immediate fields of the SOURCE-1 field
- * of the instruction. The immediate value is left
- * shifted by (0, 1, 2) based on the operand size.
- */
- u32_t mask = 0x1f | (0x3 << 8);
- u32_t bottom, top;
- val &= 0x7f;
- if (reloc_type == R_UBICOM32_LO7_2_S) {
- val >>= 1;
- } else if (reloc_type == R_UBICOM32_LO7_4_S) {
- val >>= 2;
- }
-
- bottom = val & 0x1f;
- top = val >> 5;
- insn &= ~mask;
- insn |= bottom;
- insn |= (top << 8);
- BUG_ON(*rp != insn);
- *rp = insn;
- break;
- }
- case R_UBICOM32_LO7_D:
- case R_UBICOM32_LO7_2_D:
- case R_UBICOM32_LO7_4_D:
- {
- /*
- * Bits 0 - 6 of the relocation are encoded into the
- * 7bit unsigned immediate fields of the DESTINATION
- * field of the instruction. The immediate value is
- * left shifted by (0, 1, 2) based on the operand size.
- */
- u32_t mask = (0x1f | (0x3 << 8)) << 16;
- u32_t bottom, top;
- val &= 0x7f;
- if (reloc_type == R_UBICOM32_LO7_2_D) {
- val >>= 1;
- } else if (reloc_type == R_UBICOM32_LO7_4_D) {
- val >>= 2;
- }
- bottom = (val & 0x1f) << 16;
- top = (val >> 5) << 16;
- insn &= ~mask;
- insn |= bottom;
- insn |= (top << 8);
- BUG_ON(*rp != insn);
- *rp = insn;
- break;
- }
- case R_UBICOM32_LO7_CALLI:
- case R_UBICOM32_LO16_CALLI:
- {
- /*
- * Extract the offset for a CALLI instruction. The
- * offsets can be either 7 bits or 18 bits. Since all
- * instructions in ubicom32 architecture are at work
- * aligned addresses the truncated offset is right
- * shifted by 2 before being encoded in the instruction.
- */
- if (reloc_type == R_UBICOM32_LO7_CALLI) {
- val &= 0x7f;
- } else {
- val &= 0x3ffff;
- }
-
- val >>= 2;
-
- insn &= ~0x071f071f;
- insn |= (val & 0x1f) << 0;
- val >>= 5;
- insn |= (val & 0x07) << 8;
- val >>= 3;
- insn |= (val & 0x1f) << 16;
- val >>= 5;
- insn |= (val & 0x07) << 24;
- if (reloc_type == R_UBICOM32_LO7_CALLI) {
- BUG_ON(*rp != insn);
- }
- *rp = insn;
- }
- break;
- }
-
- if (*persistent) {
- *persistent = 0;
- }
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/head.S
- * <TODO: Replace with short file description>
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/sys.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/page_offset.h>
-#define __ASM__
-#include <asm/ip5000.h>
-
-
-#define SRC_AN A3
-#define DST_AN A4
-
-#define PARAM_DN D0
-#define TMP_DN D15
-#define TMP2_DN D14
-
-/*
- * The following code is placed at the start of the Linux section of memory.
- * This is the primary entry point for Linux.
- *
- * However, we also want the syscall entry/exit code to be at a fixed address.
- * So we take the primary entry point and reserve 16 bytes. That address is
- * where the system_call entry point exists. This 16 bytes basically allows
- * us to jump around the system_call entry point code to the actual startup
- * code.
- *
- * Linux Memory Map (see vlinux.lds.S):
- * 0x40400000 - Primary Entry Point for Linux (jump around code below).
- * 0x40400010 - Old syscall Entry Point.
- */
-
- .sect .skip_syscall, "ax", @progbits
- .global __skip_syscall_section
-__skip_syscall_section:
- moveai A3, #%hi(_start)
- lea.1 A3, %lo(_start)(A3)
- ret A3
-/*
- * __os_node_offset contains the offset from KERNELBASE to the os_node, it is
- * not intended to be used by anything except the boot code.
- */
-__os_node_offset:
-.long (_os_node - KERNELSTART)
-
-.text
-.global _start
-
-/*
- * start()
- * This is the start of the Linux kernel.
- */
-_start:
- move.4 SCRATCHPAD1, #0
-
-
-/*
- * Setup the range registers... the loader has setup a few, but we will go ahead
- * and correct them for our own limits. Note that once set these are never
- * changed again. The ranges are as follows
- *
- * D_RANGE0 - io block (set up by loaded)
- *
- * I_RANGE0 and D_RANGE1 - kernel/ultra loader address space bottom of ocm-> top
- * of ram typically 0x3ffc0000 - 0x440000000
- * I_RANGE1 - kernel / userspace transition area (aka syscalls, context switches)
- * typically 0x3FFC0030 - ~0x3FFC0200
- * I_RANGE2 / D_RANGE2 - slab area
- * typically 0x40A00000 - ~0x44000000
- * I_RANGE3
- * old system call interface if enabled.
- *
- * D_RANGE3, D_RANGE4 - unused.
- */
- moveai SRC_AN, #%hi(PAGE_OFFSET_RAW)
- lea.4 SRC_AN, %lo(PAGE_OFFSET_RAW)(SRC_AN)
- move.4 D_RANGE1_LO, SRC_AN
- move.4 I_RANGE0_LO, SRC_AN
-
-; don't try to calculate I_RANGE_HI, see below
-; moveai SRC_AN, #%hi(___init_end-4)
-; lea.4 SRC_AN, %lo(___init_end-4)(SRC_AN)
-; move.4 I_RANGE0_HI, SRC_AN
-
- moveai SRC_AN, #%hi(SDRAMSTART + CONFIG_MIN_RAMSIZE-4)
- lea.4 SRC_AN, %lo(SDRAMSTART + CONFIG_MIN_RAMSIZE-4)(SRC_AN)
- move.4 D_RANGE1_HI, SRC_AN
-
-; for now allow the whole ram to be executable as well so we don't run into problems
-; once we load user more code.
- move.4 I_RANGE0_HI, SRC_AN
-
-#ifdef CONFIG_PROTECT_KERNEL
-; when kernel protection is enabled, we only open up syscall and non kernel text
-; for userspace apps, for now only irange registers registers 1 and 2 are used for userspace.
-
- ;; syscall range
- moveai SRC_AN, #%hi(__syscall_text_run_begin)
- lea.4 SRC_AN, %lo(__syscall_text_run_begin)(SRC_AN)
- move.4 I_RANGE1_LO, SRC_AN
- moveai SRC_AN, #%hi(__syscall_text_run_end)
- lea.4 SRC_AN, %lo(__syscall_text_run_end)(SRC_AN)
- move.4 I_RANGE1_HI, SRC_AN
-
- ;; slab instructions
- moveai SRC_AN, #%hi(_edata)
- lea.4 SRC_AN, %lo(_edata)(SRC_AN)
- move.4 I_RANGE2_LO, SRC_AN
- ;; End of DDR is already in range0 hi so just copy it.
- move.4 I_RANGE2_HI, I_RANGE0_HI
-
-#ifdef CONFIG_OLD_40400010_SYSTEM_CALL
- ;; create a small hole for old syscall location
- moveai SRC_AN, #%hi(0x40400000)
- lea.4 I_RANGE3_LO, 0x10(SRC_AN)
- lea.4 I_RANGE3_HI, 0x14(SRC_AN)
-#endif
- ;; slab data (same as slab instructions but starting a little earlier).
- moveai SRC_AN, #%hi(_data_protection_end)
- lea.4 SRC_AN, %lo(_data_protection_end)(SRC_AN)
- move.4 D_RANGE2_LO, SRC_AN
- move.4 D_RANGE2_HI, I_RANGE0_HI
-
-;; enable ranges
- ;; skip I_RANGE0_EN
- move.4 I_RANGE1_EN, #-1
- move.4 I_RANGE2_EN, #-1
-#ifdef CONFIG_OLD_40400010_SYSTEM_CALL
- move.4 I_RANGE3_EN, #-1
-#else
- move.4 I_RANGE3_EN, #0
-#endif
- ;; skip D_RANGE0_EN or D_RANGE1_EN
- move.4 D_RANGE2_EN, #-1
- move.4 D_RANGE3_EN, #0
- move.4 D_RANGE4_EN, #0
-#endif
-
-;
-; If __ocm_free_begin is smaller than __ocm_free_end the
-; setup OCM text and data ram banks properly
-;
- moveai DST_AN, #%hi(__ocm_free_begin)
- lea.4 TMP_DN, %lo(__ocm_free_begin)(DST_AN)
- moveai DST_AN, #%hi(__ocm_free_end)
- lea.4 TMP2_DN, %lo(__ocm_free_end)(DST_AN)
- sub.4 #0, TMP2_DN, TMP_DN
- jmple.f 2f
- moveai DST_AN, #%hi(__data_begin)
- lea.4 TMP_DN, %lo(__data_begin)(DST_AN)
- moveai DST_AN, #%hi(OCMSTART)
- lea.4 TMP2_DN, %lo(OCMSTART)(DST_AN)
- sub.4 TMP_DN, TMP_DN, TMP2_DN
- lsr.4 TMP_DN, TMP_DN, #15
- lsl.4 TMP_DN, #1, TMP_DN
- moveai DST_AN, #%hi(OCMC_BASE)
- add.4 OCMC_BANK_MASK(DST_AN), #-1, TMP_DN
- pipe_flush 0
-2:
-;
-; Load .ocm_text
-;
- moveai DST_AN, #%hi(__ocm_text_run_end)
- lea.4 TMP_DN, %lo(__ocm_text_run_end)(DST_AN)
- moveai DST_AN, #%hi(__ocm_text_run_begin)
- lea.4 DST_AN, %lo(__ocm_text_run_begin)(DST_AN)
- moveai SRC_AN, #%hi(__ocm_text_load_begin)
- lea.4 SRC_AN, %lo(__ocm_text_load_begin)(SRC_AN)
- jmpt.t 2f
-
-1: move.4 (DST_AN)4++, (SRC_AN)4++
-
-2: sub.4 #0, DST_AN, TMP_DN
- jmpne.t 1b
-;
-; Load .syscall_text
-;
- moveai DST_AN, #%hi(__syscall_text_run_end)
- lea.4 TMP_DN, %lo(__syscall_text_run_end)(DST_AN)
- moveai DST_AN, #%hi(__syscall_text_run_begin)
- lea.4 DST_AN, %lo(__syscall_text_run_begin)(DST_AN)
- moveai SRC_AN, #%hi(__syscall_text_load_begin)
- lea.4 SRC_AN, %lo(__syscall_text_load_begin)(SRC_AN)
- jmpt.t 2f
-
-1: move.4 (DST_AN)4++, (SRC_AN)4++
-
-2: sub.4 #0, DST_AN, TMP_DN
- jmpne.t 1b
-
-;
-; Load .ocm_data
-;
- moveai DST_AN, #%hi(__ocm_data_run_end)
- lea.4 TMP_DN, %lo(__ocm_data_run_end)(DST_AN)
- moveai DST_AN, #%hi(__ocm_data_run_begin)
- lea.4 DST_AN, %lo(__ocm_data_run_begin)(DST_AN)
- moveai SRC_AN, #%hi(__ocm_data_load_begin)
- lea.4 SRC_AN, %lo(__ocm_data_load_begin)(SRC_AN)
- jmpt.t 2f
-
-1: move.4 (DST_AN)4++, (SRC_AN)4++
-
-2: sub.4 #0, DST_AN, TMP_DN
- jmpne.t 1b
-
-; Clear .bss
-;
- moveai SRC_AN, #%hi(_ebss)
- lea.4 TMP_DN, %lo(_ebss)(SRC_AN)
- moveai DST_AN, #%hi(_sbss)
- lea.4 DST_AN, %lo(_sbss)(DST_AN)
- jmpt.t 2f
-
-1: move.4 (DST_AN)4++, #0
-
-2: sub.4 #0, DST_AN, TMP_DN
- jmpne.t 1b
-
-; save our parameter to devtree (after clearing .bss)
- moveai DST_AN, #%hi(devtree)
- lea.4 DST_AN, %lo(devtree)(DST_AN)
- move.4 (DST_AN), PARAM_DN
-
- moveai sp, #%hi(init_thread_union)
- lea.4 sp, %lo(init_thread_union)(sp)
- movei TMP_DN, #ASM_THREAD_SIZE
- add.4 sp, sp, TMP_DN
- move.4 -4(sp)++, #0 ; nesting level = 0
- move.4 -4(sp)++, #1 ; KERNEL_THREAD
-
-;; ip3k-elf-gdb backend now sets scratchpad3 to 1 when either continue
-;; or single step commands are issued. scratchpad3 is set to 0 when the
-;; debugger detaches from the board.
- move.4 TMP_DN, scratchpad3
- lsl.4 TMP_DN, TMP_DN, #0x0
- jmpeq.f _jump_to_start_kernel
-_ok_to_set_break_points_in_linux:
-;; THREAD_STALL
- move.4 mt_dbg_active_clr,#-1
-;; stalling the threads isn't instantaneous.. need to flush the pipe.
- pipe_flush 0
- pipe_flush 0
-
-_jump_to_start_kernel:
- moveai SRC_AN, #%hi(start_kernel)
- lea.4 SRC_AN, %lo(start_kernel)(SRC_AN)
- ret SRC_AN
+++ /dev/null
-/*
- * arch/ubicom32/kernel/init_task.c
- * Ubicom32 architecture task initialization implementation.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/init_task.h>
-#include <linux/fs.h>
-#include <linux/mqueue.h>
-#include <linux/uaccess.h>
-#include <asm/pgtable.h>
-#include <linux/version.h>
-
-///static struct fs_struct init_fs = INIT_FS;
-static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
-static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32)
-struct mm_struct init_mm = INIT_MM(init_mm);
-EXPORT_SYMBOL(init_mm);
-#endif
-
-/*
- * Initial task structure.
- *
- * All other task structs will be allocated on slabs in fork.c
- */
-struct task_struct init_task = INIT_TASK(init_task);
-
-EXPORT_SYMBOL(init_task);
-
-/*
- * Initial thread structure.
- *
- * We need to make sure that this is 8192-byte aligned due to the
- * way process stacks are handled. This is done by having a special
- * "init_task" linker map entry..
- */
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+++ /dev/null
-/*
- * arch/ubicom32/kernel/irq.c
- * Ubicom32 architecture IRQ support.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/types.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
-#include <asm/system.h>
-#include <asm/traps.h>
-#include <asm/ldsr.h>
-#include <asm/ip5000.h>
-#include <asm/machdep.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread.h>
-#include <asm/devtree.h>
-
-unsigned int irq_soft_avail;
-static struct irqaction ubicom32_reserve_action[NR_IRQS];
-
-#if !defined(CONFIG_DEBUG_IRQMEASURE)
-#define IRQ_DECLARE_MEASUREMENT
-#define IRQ_MEASUREMENT_START()
-#define IRQ_MEASUREMENT_END(irq)
-#else
-#define IRQ_DECLARE_MEASUREMENT \
- int __diff; \
- unsigned int __tstart;
-
-#define IRQ_MEASUREMENT_START() \
- __tstart = UBICOM32_IO_TIMER->sysval;
-
-#define IRQ_MEASUREMENT_END(irq) \
- __diff = (int)UBICOM32_IO_TIMER->sysval - (int)__tstart; \
- irq_measurement_update((irq), __diff);
-
-/*
- * We keep track of the time spent in both irq_enter()
- * and irq_exit().
- */
-#define IRQ_WEIGHT 32
-
-struct irq_measurement {
- volatile unsigned int min;
- volatile unsigned int avg;
- volatile unsigned int max;
-};
-
-static DEFINE_SPINLOCK(irq_measurement_lock);
-
-/*
- * Add 1 in for softirq (irq_exit());
- */
-static struct irq_measurement irq_measurements[NR_IRQS + 1];
-
-/*
- * irq_measurement_update()
- * Update an entry in the measurement array for this irq.
- */
-static void irq_measurement_update(int irq, int sample)
-{
- struct irq_measurement *im = &irq_measurements[irq];
- spin_lock(&irq_measurement_lock);
- if ((im->min == 0) || (im->min > sample)) {
- im->min = sample;
- }
- if (im->max < sample) {
- im->max = sample;
- }
- im->avg = ((im->avg * (IRQ_WEIGHT - 1)) + sample) / IRQ_WEIGHT;
- spin_unlock(&irq_measurement_lock);
-}
-#endif
-
-/*
- * irq_kernel_stack_check()
- * See if the kernel stack is within STACK_WARN of the end.
- */
-static void irq_kernel_stack_check(int irq, struct pt_regs *regs)
-{
-#ifdef CONFIG_DEBUG_STACKOVERFLOW
- unsigned long sp;
-
- /*
- * Make sure that we are not close to the top of the stack and thus
- * can not really service this interrupt.
- */
- asm volatile (
- "and.4 %0, SP, %1 \n\t"
- : "=d" (sp)
- : "d" (THREAD_SIZE - 1)
- : "cc"
- );
-
- if (sp < (sizeof(struct thread_info) + STACK_WARN)) {
- printk(KERN_WARNING
- "cpu[%d]: possible overflow detected sp remain: %p, "
- "irq: %d, regs: %p\n",
- thread_get_self(), (void *)sp, irq, regs);
- dump_stack();
- }
-
- if (sp < (sizeof(struct thread_info) + 16)) {
- THREAD_STALL;
- }
-#endif
-}
-
-/*
- * irq_get_lsb()
- * Get the LSB set in value
- */
-static int irq_get_lsb(unsigned int value)
-{
- static unsigned char irq_bits[8] = {
- 3, 0, 1, 0, 2, 0, 1, 0
- };
- u32_t nextbit = 0;
-
- value = (value >> nextbit) | (value << ((sizeof(value) * 8) - nextbit));
-
- /*
- * It's unlikely that we find that we execute the body of this while
- * loop. 50% of the time we won't take this at all and then of the
- * cases where we do about 50% of those we only execute once.
- */
- if (!(value & 0xffff)) {
- nextbit += 0x10;
- value >>= 16;
- }
-
- if (!(value & 0xff)) {
- nextbit += 0x08;
- value >>= 8;
- }
-
- if (!(value & 0xf)) {
- nextbit += 0x04;
- value >>= 4;
- }
-
- nextbit += irq_bits[value & 0x7];
- if (nextbit > 63) {
- panic("nextbit out of range: %d\n", nextbit);
- }
- return nextbit;
-}
-
-/*
- * ubicom32_reserve_handler()
- * Bogus handler associated with pre-reserved IRQ(s).
- */
-static irqreturn_t ubicom32_reserve_handler(int irq, void *dev_id)
-{
- BUG();
- return IRQ_HANDLED;
-}
-
-/*
- * __irq_disable_vector()
- * Disable the interrupt by clearing the appropriate bit in the
- * LDSR Mask Register.
- */
-static void __irq_disable_vector(unsigned int irq)
-{
- ldsr_disable_vector(irq);
-}
-
-/*
- * __irq_ack_vector()
- * Acknowledge the specific interrupt by clearing the associate bit in
- * hardware
- */
-static void __irq_ack_vector(unsigned int irq)
-{
- if (irq < 32) {
- asm volatile ("move.4 INT_CLR0, %0" : : "d" (1 << irq));
- } else {
- asm volatile ("move.4 INT_CLR1, %0" : : "d" (1 << (irq - 32)));
- }
-}
-
-/*
- * __irq_enable_vector()
- * Clean and then enable the interrupt by setting the appropriate bit in
- * the LDSR Mask Register.
- */
-static void __irq_enable_vector(unsigned int irq)
-{
- /*
- * Acknowledge, really clear the vector.
- */
- __irq_ack_vector(irq);
- ldsr_enable_vector(irq);
-}
-
-/*
- * __irq_mask_vector()
- */
-static void __irq_mask_vector(unsigned int irq)
-{
- ldsr_mask_vector(irq);
-}
-
-/*
- * __irq_unmask_vector()
- */
-static void __irq_unmask_vector(unsigned int irq)
-{
- ldsr_unmask_vector(irq);
-}
-
-/*
- * __irq_end_vector()
- * Called once an interrupt is completed (reset the LDSR mask).
- */
-static void __irq_end_vector(unsigned int irq)
-{
- ldsr_unmask_vector(irq);
-}
-
-#if defined(CONFIG_SMP)
-/*
- * __irq_set_affinity()
- * Set the cpu affinity for this interrupt.
- * affinity container allocated at boot
- */
-static void __irq_set_affinity(unsigned int irq, const struct cpumask *dest)
-{
- smp_set_affinity(irq, dest);
- cpumask_copy(irq_desc[irq].affinity, dest);
-}
-#endif
-
-/*
- * On-Chip Generic Interrupt function handling.
- */
-static struct irq_chip ubicom32_irq_chip = {
- .name = "Ubicom32",
- .startup = NULL,
- .shutdown = NULL,
- .enable = __irq_enable_vector,
- .disable = __irq_disable_vector,
- .ack = __irq_ack_vector,
- .mask = __irq_mask_vector,
- .unmask = __irq_unmask_vector,
- .end = __irq_end_vector,
-#if defined(CONFIG_SMP)
- .set_affinity = __irq_set_affinity,
-#endif
-};
-
-/*
- * do_IRQ()
- * Primary interface for handling IRQ() requests.
- */
-asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
-{
- struct pt_regs *oldregs;
- struct thread_info *ti = current_thread_info();
-
- IRQ_DECLARE_MEASUREMENT;
-
- /*
- * Mark that we are inside of an interrupt and
- * that interrupts are disabled.
- */
- oldregs = set_irq_regs(regs);
- ti->interrupt_nesting++;
- trace_hardirqs_off();
- irq_kernel_stack_check(irq, regs);
-
- /*
- * Start the interrupt sequence
- */
- irq_enter();
-
- /*
- * Execute the IRQ handler and any pending SoftIRQ requests.
- */
- BUG_ON(!irqs_disabled());
- IRQ_MEASUREMENT_START();
- __do_IRQ(irq);
- IRQ_MEASUREMENT_END(irq);
- BUG_ON(!irqs_disabled());
-
- /*
- * TODO: Since IRQ's are disabled when calling irq_exit()
- * modify Kconfig to set __ARCH_IRQ_EXIT_IRQS_DISABLED flag.
- * This will slightly improve performance by enabling
- * softirq handling to avoid disabling/disabled interrupts.
- */
- IRQ_MEASUREMENT_START();
- irq_exit();
- IRQ_MEASUREMENT_END(NR_IRQS);
- BUG_ON(!irqs_disabled());
-
- /*
- * Outside of an interrupt (or nested exit).
- */
- set_irq_regs(oldregs);
- trace_hardirqs_on();
- ti->interrupt_nesting--;
-}
-
-/*
- * irq_soft_alloc()
- * Allocate a soft IRQ.
- */
-int irq_soft_alloc(unsigned int *soft)
-{
- if (irq_soft_avail == 0) {
- printk(KERN_NOTICE "no soft irqs to allocate\n");
- return -EFAULT;
- }
-
- *soft = irq_get_lsb(irq_soft_avail);
- irq_soft_avail &= ~(1 << *soft);
- return 0;
-}
-
-/*
- * ack_bad_irq()
- * Called to handle an bad irq request.
- */
-void ack_bad_irq(unsigned int irq)
-{
- printk(KERN_ERR "IRQ: unexpected irq=%d\n", irq);
- __irq_end_vector(irq);
-}
-
-/*
- * show_interrupts()
- * Return a string that displays the state of each of the interrupts.
- */
-int show_interrupts(struct seq_file *p, void *v)
-{
- struct irqaction *ap;
- int irq = *((loff_t *) v);
- int j;
-
- if (irq >= NR_IRQS) {
- return 0;
- }
-
- if (irq == 0) {
- seq_puts(p, " ");
- for_each_online_cpu(j) {
- seq_printf(p, "CPU%d ", j);
- }
- seq_putc(p, '\n');
- }
-
- ap = irq_desc[irq].action;
- if (ap) {
- seq_printf(p, "%3d: ", irq);
- for_each_online_cpu(j) {
- seq_printf(p, "%10u ", kstat_irqs_cpu(irq, j));
- }
- seq_printf(p, "%14s ", irq_desc[irq].chip->name);
- seq_printf(p, "%s", ap->name);
- for (ap = ap->next; ap; ap = ap->next) {
- seq_printf(p, ", %s", ap->name);
- }
- seq_putc(p, '\n');
- }
- return 0;
-}
-
-#if defined(CONFIG_DEBUG_IRQMEASURE)
-static unsigned int irq_cycles_to_micro(unsigned int cycles, unsigned int frequency)
-{
- unsigned int micro = (cycles / (frequency / 1000000));
- return micro;
-}
-
-/*
- * irq_measurement_show()
- * Print out the min, avg, max values for each IRQ
- *
- * By request, the max value is reset after each dump.
- */
-static int irq_measurement_show(struct seq_file *p, void *v)
-{
- struct irqaction *ap;
- unsigned int freq = processor_frequency();
- int irq = *((loff_t *) v);
-
-
- if (irq == 0) {
- seq_puts(p, "\tmin\tavg\tmax\t(micro-seconds)\n");
- }
-
- if (irq > NR_IRQS) {
- return 0;
- }
-
- if (irq == NR_IRQS) {
- unsigned int min, avg, max;
- spin_lock(&irq_measurement_lock);
- min = irq_cycles_to_micro(irq_measurements[irq].min, freq);
- avg = irq_cycles_to_micro(irq_measurements[irq].avg, freq);
- max = irq_cycles_to_micro(irq_measurements[irq].max, freq);
- irq_measurements[irq].max = 0;
- spin_unlock(&irq_measurement_lock);
- seq_printf(p, " \t%u\t%u\t%u\tsoftirq\n", min, avg, max);
- return 0;
- }
-
- ap = irq_desc[irq].action;
- if (ap) {
- unsigned int min, avg, max;
- spin_lock(&irq_measurement_lock);
- min = irq_cycles_to_micro(irq_measurements[irq].min, freq);
- avg = irq_cycles_to_micro(irq_measurements[irq].avg, freq);
- max = irq_cycles_to_micro(irq_measurements[irq].max, freq);
- irq_measurements[irq].max = 0;
- spin_unlock(&irq_measurement_lock);
- seq_printf(p, "%2u:\t%u\t%u\t%u\t%s\n", irq, min, avg, max, ap->name);
- }
- return 0;
-}
-
-static void *irq_measurement_start(struct seq_file *f, loff_t *pos)
-{
- return (*pos <= NR_IRQS) ? pos : NULL;
-}
-
-static void *irq_measurement_next(struct seq_file *f, void *v, loff_t *pos)
-{
- (*pos)++;
- if (*pos > NR_IRQS)
- return NULL;
- return pos;
-}
-
-static void irq_measurement_stop(struct seq_file *f, void *v)
-{
- /* Nothing to do */
-}
-
-static const struct seq_operations irq_measurement_seq_ops = {
- .start = irq_measurement_start,
- .next = irq_measurement_next,
- .stop = irq_measurement_stop,
- .show = irq_measurement_show,
-};
-
-static int irq_measurement_open(struct inode *inode, struct file *filp)
-{
- return seq_open(filp, &irq_measurement_seq_ops);
-}
-
-static const struct file_operations irq_measurement_fops = {
- .open = irq_measurement_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-static int __init irq_measurement_init(void)
-{
- proc_create("irq_measurements", 0, NULL, &irq_measurement_fops);
- return 0;
-}
-module_init(irq_measurement_init);
-#endif
-
-/*
- * init_IRQ(void)
- * Initialize the on-chip IRQ subsystem.
- */
-void __init init_IRQ(void)
-{
- int irq;
- struct devtree_node *p = NULL;
- struct devtree_node *iter = NULL;
- unsigned int mask = 0;
- unsigned int reserved = 0;
-
- /*
- * Pull out the list of software interrupts that are avialable to
- * Linux and provide an allocation function for them. The first
- * 24 interrupts of INT0 are software interrupts.
- */
- irq_soft_avail = 0;
- if (processor_interrupts(&irq_soft_avail, NULL) < 0) {
- printk(KERN_WARNING "No Soft IRQ(s) available\n");
- }
- irq_soft_avail &= ((1 << 24) - 1);
-
- /*
- * Initialize all of the on-chip interrupt handling
- * to use a common set of interrupt functions.
- */
- for (irq = 0; irq < NR_IRQS; irq++) {
- irq_desc[irq].status = IRQ_DISABLED;
- irq_desc[irq].action = NULL;
- irq_desc[irq].depth = 1;
- set_irq_chip(irq, &ubicom32_irq_chip);
- }
-
- /*
- * The sendirq of a devnode is not registered within Linux but instead
- * is used by the software I/O thread. These interrupts are reserved.
- * The recvirq is used by Linux and registered by a device driver, these
- * are not reserved.
- *
- * recvirq(s) that are in the software interrupt range are not supposed
- * to be marked as reserved. We track this while we scan the device
- * nodes.
- */
- p = devtree_find_next(&iter);
- while (p) {
- unsigned char sendirq, recvirq;
- devtree_irq(p, &sendirq, &recvirq);
-
- /*
- * If the sendirq is valid, mark that irq as taken by the
- * devtree node.
- */
- if (sendirq < NR_IRQS) {
- ubicom32_reserve_action[sendirq].handler =
- ubicom32_reserve_handler;
- ubicom32_reserve_action[sendirq].name = p->name;
- irq_desc[sendirq].action =
- &ubicom32_reserve_action[sendirq];
- mask |= (1 << sendirq);
- }
-
- /*
- * Track the relevant recieve IRQ(s)
- */
- if (recvirq < 24) {
- mask |= (1 << recvirq);
- }
-
- /*
- * Move to the next node.
- */
- p = devtree_find_next(&iter);
- }
-
- /*
- * Remove these bits from the irq_soft_avail list and then use the
- * result as the list of pre-reserved IRQ(s).
- */
- reserved = ~irq_soft_avail & ~mask;
- for (irq = 0; irq < 24; irq++) {
- if ((reserved & (1 << irq))) {
- ubicom32_reserve_action[irq].handler =
- ubicom32_reserve_handler;
- ubicom32_reserve_action[irq].name = "reserved";
- irq_desc[irq].action = &ubicom32_reserve_action[irq];
- }
- }
-
- /*
- * Initialize the LDSR which is the Ubicom32 programmable
- * interrupt controller.
- */
- ldsr_init();
-
- /*
- * The Ubicom trap code needs a 2nd init after IRQ(s) are setup.
- */
- trap_init_interrupt();
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/ldsr.c
- * Ubicom32 architecture Linux Device Services Driver Interface
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- *
- * NOTES:
- *
- * The LDSR is a programmable interrupt controller that is written in software.
- * It emulates the behavior of an pic by fielding the interrupts, choosing a
- * victim thread to take the interrupt and forcing that thread to take a context
- * switch to the appropriate interrupt handler.
- *
- * Because traps are treated as just a special class of interrupts, the LDSR
- * also handles the processing of traps.
- *
- * Because we compile Linux both UP and SMP, we need the LDSR to use
- * architectural locking that is not "compiled out" when compiling UP. For now,
- * we use the single atomic bit lock.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/profile.h>
-#include <linux/clocksource.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/cpumask.h>
-#include <linux/bug.h>
-#include <linux/delay.h>
-#include <asm/ip5000.h>
-#include <asm/atomic.h>
-#include <asm/machdep.h>
-#include <asm/asm-offsets.h>
-#include <asm/traps.h>
-#include <asm/thread.h>
-#include <asm/range-protect.h>
-
-/*
- * One can not print from the LDSR so the best we can do is
- * check a condition and stall all of the threads.
- */
-
-// #define DEBUG_LDSR 1
-#if defined(DEBUG_LDSR)
-#define DEBUG_ASSERT(cond) \
- if (!(cond)) { \
- THREAD_STALL; \
- }
-#else
-#define DEBUG_ASSERT(cond)
-#endif
-
-/*
- * Make global so that we can use it in the RFI code in assembly.
- */
-unsigned int ldsr_soft_irq_mask;
-EXPORT_SYMBOL(ldsr_soft_irq_mask);
-
-static unsigned int ldsr_suspend_mask;
-static unsigned int ldsr_soft_irq;
-static unsigned int ldsr_stack_space[1024];
-
-static struct ldsr_register_bank {
- volatile unsigned int enabled0;
- volatile unsigned int enabled1;
- volatile unsigned int mask0;
- volatile unsigned int mask1;
- unsigned int total;
- unsigned int retry;
- unsigned int backout;
-} ldsr_interrupt;
-
-/*
- * Which thread/cpu are we?
- */
-static int ldsr_tid = -1;
-
-#if defined(CONFIG_IRQSTACKS)
-/*
- * per-CPU IRQ stacks (thread information and stack)
- *
- * NOTE: Do not use DEFINE_PER_CPU() as it makes it harder
- * to find the location of ctx from assembly language.
- */
-union irq_ctx {
- struct thread_info tinfo;
- u32 stack[THREAD_SIZE/sizeof(u32)];
-};
-static union irq_ctx *percpu_irq_ctxs[NR_CPUS];
-
-/*
- * Storage for the interrupt stack.
- */
-#if !defined(CONFIG_IRQSTACKS_USEOCM)
-static char percpu_irq_stacks[(NR_CPUS * THREAD_SIZE) + (THREAD_SIZE - 1)];
-#else
-/*
- * For OCM, the linker will ensure that space is allocated for the stack
- * see (vmlinux.lds.S)
- */
-static char percpu_irq_stacks[];
-#endif
-
-#endif
-
-/*
- * Save trap IRQ because we need to un-suspend if it gets set.
- */
-static unsigned int ldsr_trap_irq_mask;
-static unsigned int ldsr_trap_irq;
-
-/*
- * ret_from_interrupt_to_kernel
- * Just restore the context and do nothing else.
- */
-asmlinkage void ret_from_interrupt_to_kernel(void)__attribute__((naked));
-
-/*
- * ret_from_interrupt_to_user
- * Call scheduler if needed. Just restore the context.
- */
-asmlinkage void ret_from_interrupt_to_user(void)__attribute__((naked));
-
-#ifdef DEBUG_LDSR
-u32_t old_sp, old_pc, old_a0, old_a5, old_a3;
-struct pt_regs copy_regs, *copy_save_area;
-#endif
-
-int __user_mode(unsigned long sp)
-{
-
- u32_t saved_stack_base = sp & ~(ASM_THREAD_SIZE - 1);
-#if defined(CONFIG_IRQSTACKS_USEOCM)
- if ((union irq_ctx *)saved_stack_base == percpu_irq_ctxs[smp_processor_id()]) {
- /*
- * On the interrupt stack.
- */
- return 0;
- }
-#endif
-
- if (!(u32_t)current) {
- return 0;
- }
- return saved_stack_base != ((u32_t)current->stack);
-}
-
-/*
- * ldsr_lock_release()
- * Release the LDSR lock.
- */
-static void ldsr_lock_release(void)
-{
- UBICOM32_UNLOCK(LDSR_LOCK_BIT);
-}
-
-/*
- * ldsr_lock_acquire()
- * Acquire the LDSR lock, spin if not available.
- */
-static void ldsr_lock_acquire(void)
-{
- UBICOM32_LOCK(LDSR_LOCK_BIT);
-}
-
-/*
- * ldsr_thread_irq_disable()
- * Disable interrupts for the specified thread.
- */
-static void ldsr_thread_irq_disable(unsigned int tid)
-{
- unsigned int mask = (1 << tid);
-
- asm volatile (
- " or.4 scratchpad1, scratchpad1, %0 \n\t"
- :
- : "d"(mask)
- : "cc"
- );
-}
-
-/*
- * ldsr_thread_get_interrupts()
- * Get the interrupt state for all threads.
- */
-static unsigned long ldsr_thread_get_interrupts(void)
-{
- unsigned long ret = 0;
- asm volatile (
- " move.4 %0, scratchpad1 \n\t"
- : "=r" (ret)
- :
- );
- return ret;
-}
-
-/*
- * ldsr_emulate_and_run()
- * Emulate the instruction and then set the thread to run.
- */
-static void ldsr_emulate_and_run(unsigned int tid)
-{
- unsigned int thread_mask = (1 << tid);
- u32_t write_csr = (tid << 15) | (1 << 14);
-
- /*
- * Emulate the unaligned access.
- */
- unaligned_emulate(tid);
-
- /*
- * Get the thread back in a running state.
- */
- asm volatile (
- " setcsr %0 \n\t"
- " setcsr_flush 0 \n\t"
- " move.4 trap_cause, #0 \n\t" /* Clear the trap cause
- * register */
- " setcsr #0 \n\t"
- " setcsr_flush 0 \n\t"
- " move.4 mt_dbg_active_set, %1 \n\t" /* Activate thread even if
- * in dbg/fault state */
- " move.4 mt_active_set, %1 \n\t" /* Restart target
- * thread. */
- :
- : "r" (write_csr), "d" (thread_mask)
- : "cc"
- );
- thread_enable_mask(thread_mask);
-}
-
-/*
- * ldsr_preemptive_context_save()
- * save thread context from another hardware thread. The other thread must
- * be stalled.
- */
-static inline void ldsr_preemptive_context_save(u32_t thread,
- struct pt_regs *regs)
-{
- /*
- * Save the current state of the specified thread
- */
- asm volatile (
- " move.4 a3, %0 \n\t"
-
- /* set src1 from the target thread */
- " move.4 csr, %1 \n\t"
- " setcsr_flush 0 \n\t"
- " setcsr_flush 0 \n\t"
-
- /* copy state from the other thread */
- " move.4 "D(PT_D0)"(a3), d0 \n\t"
- " move.4 "D(PT_D1)"(a3), d1 \n\t"
- " move.4 "D(PT_D2)"(a3), d2 \n\t"
- " move.4 "D(PT_D3)"(a3), d3 \n\t"
- " move.4 "D(PT_D4)"(a3), d4 \n\t"
- " move.4 "D(PT_D5)"(a3), d5 \n\t"
- " move.4 "D(PT_D6)"(a3), d6 \n\t"
- " move.4 "D(PT_D7)"(a3), d7 \n\t"
- " move.4 "D(PT_D8)"(a3), d8 \n\t"
- " move.4 "D(PT_D9)"(a3), d9 \n\t"
- " move.4 "D(PT_D10)"(a3), d10 \n\t"
- " move.4 "D(PT_D11)"(a3), d11 \n\t"
- " move.4 "D(PT_D12)"(a3), d12 \n\t"
- " move.4 "D(PT_D13)"(a3), d13 \n\t"
- " move.4 "D(PT_D14)"(a3), d14 \n\t"
- " move.4 "D(PT_D15)"(a3), d15 \n\t"
- " move.4 "D(PT_A0)"(a3), a0 \n\t"
- " move.4 "D(PT_A1)"(a3), a1 \n\t"
- " move.4 "D(PT_A2)"(a3), a2 \n\t"
- " move.4 "D(PT_A3)"(a3), a3 \n\t"
- " move.4 "D(PT_A4)"(a3), a4 \n\t"
- " move.4 "D(PT_A5)"(a3), a5 \n\t"
- " move.4 "D(PT_A6)"(a3), a6 \n\t"
- " move.4 "D(PT_SP)"(a3), a7 \n\t"
- " move.4 "D(PT_ACC0HI)"(a3), acc0_hi \n\t"
- " move.4 "D(PT_ACC0LO)"(a3), acc0_lo \n\t"
- " move.4 "D(PT_MAC_RC16)"(a3), mac_rc16 \n\t"
- " move.4 "D(PT_ACC1HI)"(a3), acc1_hi \n\t"
- " move.4 "D(PT_ACC1LO)"(a3), acc1_lo \n\t"
- " move.4 "D(PT_SOURCE3)"(a3), source3 \n\t"
- " move.4 "D(PT_INST_CNT)"(a3), inst_cnt \n\t"
- " move.4 "D(PT_CSR)"(a3), csr \n\t"
- " move.4 "D(PT_DUMMY_UNUSED)"(a3), #0 \n\t"
- " move.4 "D(PT_INT_MASK0)"(a3), int_mask0 \n\t"
- " move.4 "D(PT_INT_MASK1)"(a3), int_mask1 \n\t"
- " move.4 "D(PT_TRAP_CAUSE)"(a3), trap_cause \n\t"
- " move.4 "D(PT_PC)"(a3), pc \n\t"
- " move.4 "D(PT_PREVIOUS_PC)"(a3), previous_pc \n\t"
- /* disable csr thread select */
- " movei csr, #0 \n\t"
- " setcsr_flush 0 \n\t"
- :
- : "r" (regs->dn), "d" ((thread << 9) | (1 << 8))
- : "a3"
- );
-}
-
-/*
- * ldsr_rotate_threads()
- * Simple round robin algorithm for choosing the next cpu
- */
-static int ldsr_rotate_threads(unsigned long cpus)
-{
- static unsigned char ldsr_bits[8] = {
- 3, 0, 1, 0, 2, 0, 1, 0
- };
-
- static int nextbit;
- int thisbit;
-
- /*
- * Move the interrupts down so that we consider interrupts from where
- * we left off, then take the interrupts we would lose and move them
- * to the top half of the interrupts value.
- */
- cpus = (cpus >> nextbit) | (cpus << ((sizeof(cpus) * 8) - nextbit));
-
- /*
- * 50% of the time we won't take this at all and then of the cases where
- * we do about 50% of those we only execute once.
- */
- if (!(cpus & 0xffff)) {
- nextbit += 16;
- cpus >>= 16;
- }
-
- if (!(cpus & 0xff)) {
- nextbit += 8;
- cpus >>= 8;
- }
-
- if (!(cpus & 0xf)) {
- nextbit += 4;
- cpus >>= 4;
- }
-
- nextbit += ldsr_bits[cpus & 0x7];
- thisbit = (nextbit & ((sizeof(cpus) * 8) - 1));
- nextbit = (thisbit + 1) & ((sizeof(cpus) * 8) - 1);
- DEBUG_ASSERT(thisbit < THREAD_ARCHITECTURAL_MAX);
- return thisbit;
-}
-
-/*
- * ldsr_rotate_interrupts()
- * Get rotating next set bit value.
- */
-static int ldsr_rotate_interrupts(unsigned long long interrupts)
-{
- static unsigned char ldsr_bits[8] = {
- 3, 0, 1, 0, 2, 0, 1, 0
- };
-
- static int nextbit;
- int thisbit;
-
- /*
- * Move the interrupts down so that we consider interrupts from where
- * we left off, then take the interrupts we would lose and move them
- * to the top half of the interrupts value.
- */
- interrupts = (interrupts >> nextbit) |
- (interrupts << ((sizeof(interrupts) * 8) - nextbit));
-
- /*
- * 50% of the time we won't take this at all and then of the cases where
- * we do about 50% of those we only execute once.
- */
- if (!(interrupts & 0xffffffff)) {
- nextbit += 32;
- interrupts >>= 32;
- }
-
- if (!(interrupts & 0xffff)) {
- nextbit += 16;
- interrupts >>= 16;
- }
-
- if (!(interrupts & 0xff)) {
- nextbit += 8;
- interrupts >>= 8;
- }
-
- if (!(interrupts & 0xf)) {
- nextbit += 4;
- interrupts >>= 4;
- }
-
- nextbit += ldsr_bits[interrupts & 0x7];
- thisbit = (nextbit & ((sizeof(interrupts) * 8) - 1));
- nextbit = (thisbit + 1) & ((sizeof(interrupts) * 8) - 1);
-
- DEBUG_ASSERT(thisbit < (sizeof(interrupts) * 8));
- return thisbit;
-}
-
-/*
- * ldsr_backout_or_irq()
- *
- * One way or the other this interrupt is not being
- * processed, make sure that it is reset. We are
- * not going to call irq_end_vector() so unmask the
- * interrupt.
- */
-static void ldsr_backout_of_irq(int vector, unsigned long tid_mask)
-{
-#if defined(CONFIG_SMP)
- if (unlikely(vector == smp_ipi_irq)) {
- smp_reset_ipi(tid_mask);
- }
-#endif
- ldsr_unmask_vector(vector);
- ldsr_interrupt.backout++;
-}
-
-#if defined(CONFIG_IRQSTACKS)
-/*
- * ldsr_choose_savearea_and_returnvec()
- * Test our current state (user, kernel, interrupt) and set things up.
- *
- * This version of the function uses 3 stacks and nests interrupts
- * on the interrupt stack.
- */
-static struct pt_regs *ldsr_choose_savearea_and_returnvec(thread_t tid, u32_t linux_sp, u32_t *pvec)
-{
- struct pt_regs *save_area;
- u32_t masked_linux_sp = linux_sp & ~(THREAD_SIZE - 1);
- struct thread_info * ti= (struct thread_info *)sw_ksp[tid];
-
-#if defined(CONFIG_SMP)
- union irq_ctx *icp = percpu_irq_ctxs[tid];
-#else
- union irq_ctx *icp = percpu_irq_ctxs[0];
-#endif
-
- if (masked_linux_sp == (u32_t)icp) {
- /*
- * Fault/Interrupt occurred while on the interrupt stack.
- */
- save_area = (struct pt_regs *)((char *)linux_sp - sizeof(struct pt_regs) - 8);
- *pvec = (u32_t)(&ret_from_interrupt_to_kernel);
- } else {
- /*
- * Fault/Interrupt occurred while on user/kernel stack. This is a new
- * first use of the interrupt stack.
- */
- save_area = (struct pt_regs *) ((char *)icp + sizeof(icp->stack) - sizeof(struct pt_regs) - 8);
- if (masked_linux_sp == (u32_t)ti) {
- *pvec = (u32_t)(&ret_from_interrupt_to_kernel);
- } else {
- *pvec = (u32_t)(&ret_from_interrupt_to_user);
- }
-
- /*
- * Because the softirq code will execute on the "interrupt" stack, we
- * need to maintain the knowledge of what "task" was executing on the
- * cpu. This is done by copying the thread_info->task from the cpu
- * we are about to context switch into the interrupt contexts thread_info
- * structure.
- */
- icp->tinfo.task = ti->task;
- icp->tinfo.preempt_count =
- (icp->tinfo.preempt_count & ~SOFTIRQ_MASK) |
- (ti->preempt_count & SOFTIRQ_MASK);
- icp->tinfo.interrupt_nesting = 0;
- }
- save_area->nesting_level = icp->tinfo.interrupt_nesting;
- return save_area;
-}
-
-#else
-/*
- * ldsr_choose_savearea_and_returnvec()
- * Test our current state (user, kernel, interrupt) and set things up.
- *
- * The version of the function uses just the user & kernel stack and
- * nests interrupts on the existing kernel stack.
- */
-static struct pt_regs *ldsr_choose_savearea_and_returnvec(thread_t tid, u32_t linux_sp, u32_t *pvec)
-{
- struct pt_regs *save_area;
- u32_t masked_linux_sp = linux_sp & ~(THREAD_SIZE - 1);
- struct thread_info *ti = (struct thread_info *)sw_ksp[tid];
-
- if (masked_linux_sp == (u32_t)ti) {
- /*
- * Fault/Interrupt occurred while on the kernel stack.
- */
- save_area = (struct pt_regs *)((char *)linux_sp - sizeof(struct pt_regs) - 8);
- *pvec = (u32_t) (&ret_from_interrupt_to_kernel);
- } else {
- /*
- * Fault/Interrupt occurred while on user stack.
- */
- ti->interrupt_nesting = 0;
- save_area = (struct pt_regs *)((u32_t)ti + THREAD_SIZE - sizeof(struct pt_regs) - 8);
- *pvec = (u32_t) (&ret_from_interrupt_to_user);
- }
- save_area->nesting_level = ti->interrupt_nesting;
- return save_area;
-}
-#endif
-
-/*
- * ldsr_ctxsw_thread()
- * Context switch a mainline thread to execute do_IRQ() for the specified
- * vector.
- */
-static void ldsr_ctxsw_thread(int vector, thread_t tid)
-{
- u32_t linux_sp;
- u32_t return_vector;
- struct pt_regs *save_area, *regs;
- u32_t thread_mask = (1 << tid);
- u32_t read_csr = ((tid << 9) | (1 << 8));
- u32_t write_csr = (tid << 15) | (1 << 14);
- u32_t interrupt_vector = (u32_t)(&do_IRQ);
-
- unsigned int frame_type = UBICOM32_FRAME_TYPE_INTERRUPT;
-
-
- DEBUG_ASSERT(!thread_is_enabled(tid));
-
- /*
- * Acquire the necessary global and per thread locks for tid.
- * As a side effect, we ensure that the thread has not trapped
- * and return true if it has.
- */
- if (unlikely(thread_is_trapped(tid))) {
- /*
- * Read the trap cause, the sp and clear the MT_TRAP bits.
- */
- unsigned int cause;
- asm volatile (
- " setcsr %3 \n\t"
- " setcsr_flush 0 \n\t"
- " setcsr_flush 0 \n\t"
- " move.4 %0, TRAP_CAUSE \n\t"
- " move.4 %1, SP \n\t"
- " setcsr #0 \n\t"
- " setcsr_flush 0 \n\t"
- " move.4 MT_BREAK_CLR, %2\n\t"
- " move.4 MT_TRAP_CLR, %2 \n\t"
- : "=&r" (cause), "=&r" (linux_sp)
- : "r" (thread_mask), "m" (read_csr)
- );
-
- ldsr_backout_of_irq(vector, (1 << tid));
-
-#if !defined(CONFIG_UNALIGNED_ACCESS_DISABLED)
- /*
- * See if the unaligned trap handler can deal with this.
- * If so, emulate the instruction and then just restart
- * the thread.
- */
- if (unaligned_only(cause)) {
-#if defined(CONFIG_UNALIGNED_ACCESS_USERSPACE_ONLY)
- /*
- * Check if this is a kernel stack if so we will not
- * handle the trap
- */
- u32_t masked_linux_sp = linux_sp & ~(THREAD_SIZE - 1);
- if ((masked_linux_sp != (u32_t)sw_ksp[tid]) &&
- unaligned_only(cause)) {
- ldsr_emulate_and_run(tid);
- return;
- }
-#else
- ldsr_emulate_and_run(tid);
- return;
-#endif
-
- }
-#endif
-
- interrupt_vector = (u32_t)(&trap_handler);
- frame_type = UBICOM32_FRAME_TYPE_TRAP;
- } else {
- /*
- * Read the target thread's SP
- */
- asm volatile (
- " setcsr %1 \n\t"
- " setcsr_flush 0 \n\t"
- " setcsr_flush 0 \n\t"
- " move.4 %0, SP \n\t"
- " setcsr #0 \n\t"
- " setcsr_flush 0 \n\t"
- : "=m" (linux_sp)
- : "m" (read_csr)
- );
- }
-
- /*
- * We are delivering an interrupt, count it.
- */
- ldsr_interrupt.total++;
-
- /*
- * At this point, we will definitely force this thread to
- * a new context, show its interrupts as disabled.
- */
- ldsr_thread_irq_disable(tid);
-
- /*
- * Test our current state (user, kernel, interrupt). Save the
- * appropriate data and setup for the return.
- */
- save_area = ldsr_choose_savearea_and_returnvec(tid, linux_sp, &return_vector);
-
- /*
- * The pt_regs (save_area) contains the type of thread that we are dealing
- * with (KERNEL/NORMAL) and is copied into each pt_regs area. We get this
- * from the current tasks kernel pt_regs area that always exists at the
- * top of the kernel stack.
- */
- regs = (struct pt_regs *)((u32_t)sw_ksp[tid] + THREAD_SIZE - sizeof(struct pt_regs) - 8);
- save_area->thread_type = regs->thread_type;
-
- /*
- * Preserve the context of the Linux thread.
- */
- ldsr_preemptive_context_save(tid, save_area);
-
- /*
- * Load the fram_type into the save_area.
- */
- save_area->frame_type = frame_type;
-
-#ifdef CONFIG_STOP_ON_TRAP
- /*
- * Before we get backtrace and showing stacks working well, it sometimes
- * helps to enter the debugger when a trap occurs before we change the
- * thread to handle the fault. This optional code causes all threads to
- * stop on every trap frame. One assumes that GDB connected via the
- * mailbox interface will be used to recover from this state.
- */
- if (frame_type == UBICOM32_FRAME_TYPE_TRAP) {
- THREAD_STALL;
- }
-#endif
-
-#ifdef DEBUG_LDSR
- copy_regs = *save_area;
- copy_save_area = save_area;
-
- old_a0 = save_area->an[0];
- old_a3 = save_area->an[3];
- old_sp = save_area->an[7];
- old_a5 = save_area->an[5];
- old_pc = save_area->pc;
-#endif
-
- /*
- * Now we have to switch the kernel thread to run do_IRQ function.
- * Set pc to do_IRQ
- * Set d0 to vector
- * Set d1 to save_area.
- * Set a5 to the proper return vector.
- */
- asm volatile (
- " setcsr %0 \n\t"
- " setcsr_flush 0 \n\t"
- " move.4 d0, %5 \n\t" /* d0 = 0 vector # */
- " move.4 d1, %1 \n\t" /* d1 = save_area */
- " move.4 sp, %1 \n\t" /* sp = save_area */
- " move.4 a5, %2 \n\t" /* a5 = return_vector */
- " move.4 pc, %3 \n\t" /* pc = do_IRQ routine. */
- " move.4 trap_cause, #0 \n\t" /* Clear the trap cause
- * register */
- " setcsr #0 \n\t"
- " setcsr_flush 0 \n\t"
- " enable_kernel_ranges %4 \n\t"
- " move.4 mt_dbg_active_set, %4 \n\t" /* Activate thread even if
- * in dbg/fault state */
- " move.4 mt_active_set, %4 \n\t" /* Restart target
- * thread. */
- :
- : "r" (write_csr), "r" (save_area),
- "r" (return_vector), "r" (interrupt_vector),
- "d" (thread_mask), "r" (vector)
- : "cc"
- );
- thread_enable_mask(thread_mask);
-}
-
-/*
- * ldsr_deliver_interrupt()
- * Deliver the interrupt to one of the threads or all of the threads.
- */
-static void ldsr_deliver_interrupt(int vector,
- unsigned long deliver_to,
- int all)
-{
- unsigned long disabled_threads;
- unsigned long possible_threads;
- unsigned long trapped_threads;
- unsigned long global_locks;
-
- /*
- * Disable all of the threads that we might want to send
- * this interrupt to.
- */
-retry:
- DEBUG_ASSERT(deliver_to);
- thread_disable_mask(deliver_to);
-
- /*
- * If any threads are in the trap state, we have to service the
- * trap for those threads first.
- */
- asm volatile (
- "move.4 %0, MT_TRAP \n\t"
- : "=r" (trapped_threads)
- :
- );
-
- trapped_threads &= deliver_to;
- if (unlikely(trapped_threads)) {
- /*
- * all traps will be handled, so clear the trap bit before restarting any threads
- */
- ubicom32_clear_interrupt(ldsr_trap_irq);
-
- /*
- * Let the remaining untrapped threads, continue.
- */
- deliver_to &= ~trapped_threads;
- if (deliver_to) {
- thread_enable_mask(deliver_to);
- }
-
- /*
- * For the trapped threads force them to handle
- * a trap.
- */
- while (trapped_threads) {
- unsigned long which = ffz(~trapped_threads);
- trapped_threads &= ~(1 << which);
- ldsr_ctxsw_thread(vector, which);
- }
- return;
- }
-
- /*
- * Can we deliver an interrupt to any of the threads?
- */
- disabled_threads = ldsr_thread_get_interrupts();
- possible_threads = deliver_to & ~disabled_threads;
- if (unlikely(!possible_threads)) {
-#if defined(CONFIG_SMP)
- /*
- * In the SMP case, we can not wait because 1 cpu might be
- * sending an IPI to another cpu which is currently blocked.
- * The only way to ensure IPI delivery is to backout and
- * keep trying. For SMP, we don't sleep until the interrupts
- * are delivered.
- */
- thread_enable_mask(deliver_to);
- ldsr_backout_of_irq(vector, deliver_to);
- return;
-#else
- /*
- * In the UP case, we have nothing to do so we should wait.
- *
- * Since the INT_MASK0 and INT_MASK1 are "re-loaded" before we
- * suspend in the outer loop, we do not need to save them here.
- *
- * We test that we were awakened for our specific interrupts
- * because the ldsr mask/unmask operations will force the ldsr
- * awake even if the interrupt on the mainline thread is not
- * completed.
- */
- unsigned int scratch = 0;
- thread_enable_mask(deliver_to);
- asm volatile (
- " move.4 INT_MASK0, %1 \n\t"
- " move.4 INT_MASK1, #0 \n\t"
-
- "1: suspend \n\t"
- " move.4 %0, INT_STAT0 \n\t"
- " and.4 %0, %0, %1 \n\t"
- " jmpeq.f 1b \n\t"
-
- " move.4 INT_CLR0, %2 \n\t"
- : "+r" (scratch)
- : "d" (ldsr_suspend_mask), "r" (ldsr_soft_irq_mask)
- : "cc"
- );
-
- /*
- * This delay is sized to coincide with the time it takes a
- * thread to complete the exit (see return_from_interrupt).
- */
- ldsr_interrupt.retry++;
- __delay(10);
- goto retry;
-#endif
- }
-
- /*
- * If any of the global locks are held, we can not deliver any
- * interrupts, we spin delay(10) and then try again. If our
- * spinning becomes a bottle neck, we will need to suspend but for
- * now lets just spin.
- */
- asm volatile (
- "move.4 %0, scratchpad1 \n\t"
- : "=r" (global_locks)
- :
- );
- if (unlikely(global_locks & 0xffff0000)) {
- thread_enable_mask(deliver_to);
-
- /*
- * This delay is sized to coincide with the average time it
- * takes a thread to release a global lock.
- */
- ldsr_interrupt.retry++;
- __delay(10);
- goto retry;
- }
-
- /*
- * Deliver to one cpu.
- */
- if (!all) {
- /*
- * Find our victim and then enable everyone else.
- */
- unsigned long victim = ldsr_rotate_threads(possible_threads);
- DEBUG_ASSERT((deliver_to & (1 << victim)));
- DEBUG_ASSERT((possible_threads & (1 << victim)));
-
- deliver_to &= ~(1 << victim);
- if (deliver_to) {
- thread_enable_mask(deliver_to);
- }
- ldsr_ctxsw_thread(vector, victim);
- return;
- }
-
- /*
- * If we can't deliver to some threads, wake them
- * back up and reset things to deliver to them.
- */
- deliver_to &= ~possible_threads;
- if (unlikely(deliver_to)) {
- thread_enable_mask(deliver_to);
- ldsr_backout_of_irq(vector, deliver_to);
- }
-
- /*
- * Deliver to all possible threads(s).
- */
- while (possible_threads) {
- unsigned long victim = ffz(~possible_threads);
- possible_threads &= ~(1 << victim);
- ldsr_ctxsw_thread(vector, victim);
- }
-}
-
-/*
- * ldsr_thread()
- * This thread acts as the interrupt controller for Linux.
- */
-static void ldsr_thread(void *arg)
-{
- int stat0;
- int stat1;
- int interrupt0;
- int interrupt1;
- long long interrupts;
- unsigned long cpus;
-
-#if !defined(CONFIG_SMP)
- /*
- * In a non-smp configuration, we can not use the cpu(s) arrays because
- * there is not a 1-1 correspondence between cpus(s) and our threads.
- * Thus we must get a local idea of the mainline threads and use the
- * one and only 1 set as the victim. We do this once before the ldsr
- * loop.
- *
- * In the SMP case, we will use the cpu(s) map to determine which cpu(s)
- * are valid to send interrupts to.
- */
- int victim = 0;
- unsigned int mainline = thread_get_mainline();
- if (mainline == 0) {
- panic("no mainline Linux threads to interrupt");
- return;
- }
- victim = ffz(~mainline);
- cpus = (1 << victim);
-#endif
-
- while (1) {
- /*
- * If one changes this code not to reload the INT_MASK(s), you
- * need to know that code in the lock waiting above does not
- * reset the MASK registers back; so that code will need to be
- * changed.
- */
- ldsr_lock_acquire();
- asm volatile (
- " move.4 INT_MASK0, %0 \n\t"
- " move.4 INT_MASK1, %1 \n\t"
- :
- : "U4" (ldsr_interrupt.mask0), "U4" (ldsr_interrupt.mask1)
- );
- ldsr_lock_release();
- thread_suspend();
-
- /*
- * Read the interrupt status registers
- */
- asm volatile (
- "move.4 %0, INT_STAT0 \n\t"
- "move.4 %1, INT_STAT1 \n\t"
- : "=r" (stat0), "=r" (stat1)
- :
- );
-
- /*
- * We only care about interrupts that we have been told to care
- * about. The interrupt must be enabled, unmasked, and have
- * occurred in the hardware.
- */
- ldsr_lock_acquire();
- interrupt0 = ldsr_interrupt.enabled0 &
- ldsr_interrupt.mask0 & stat0;
- interrupt1 = ldsr_interrupt.enabled1 &
- ldsr_interrupt.mask1 & stat1;
- ldsr_lock_release();
-
- /*
- * For each interrupt in the "snapshot" we will mask the
- * interrupt handle the interrupt (typically calling do_IRQ()).
- *
- * The interrupt is unmasked by desc->chip->end() function in
- * the per chip generic interrupt handling code
- * (arch/ubicom32/kernel/irq.c).8
- */
- interrupts = ((unsigned long long)interrupt1 << 32) |
- interrupt0;
- while (interrupts) {
- int all = 0;
- int vector = ldsr_rotate_interrupts(interrupts);
- interrupts &= ~((unsigned long long)1 << vector);
-
- /*
- * Now mask off this vector so that the LDSR ignores
- * it until it is acknowledged.
- */
- ldsr_mask_vector(vector);
-#if !defined(CONFIG_SMP)
- ldsr_deliver_interrupt(vector, cpus, all);
-#else
- cpus = smp_get_affinity(vector, &all);
- if (!cpus) {
- /*
- * No CPU to deliver to so just leave
- * the interrupt unmasked and increase
- * the backout count. We will eventually
- * return and deliver it again.
- */
- ldsr_unmask_vector(vector);
- ldsr_interrupt.backout++;
- continue;
- }
- ldsr_deliver_interrupt(vector, cpus, all);
-#endif
- }
- }
-
- /* NOTREACHED */
-}
-
-/*
- * ldsr_mask_vector()
- * Temporarily mask the interrupt vector, turn off the bit in the mask
- * register.
- */
-void ldsr_mask_vector(unsigned int vector)
-{
- unsigned int mask;
- if (vector < 32) {
- mask = ~(1 << vector);
- ldsr_lock_acquire();
- ldsr_interrupt.mask0 &= mask;
- ldsr_lock_release();
- thread_resume(ldsr_tid);
- return;
- }
-
- mask = ~(1 << (vector - 32));
- ldsr_lock_acquire();
- ldsr_interrupt.mask1 &= mask;
- ldsr_lock_release();
- thread_resume(ldsr_tid);
-}
-
-/*
- * ldsr_unmask_vector()
- * Unmask the interrupt vector so that it can be used, turn on the bit in
- * the mask register.
- *
- * Because it is legal for the interrupt path to disable an interrupt,
- * the unmasking code must ensure that disabled interrupts are not
- * unmasked.
- */
-void ldsr_unmask_vector(unsigned int vector)
-{
- unsigned int mask;
- if (vector < 32) {
- mask = (1 << vector);
- ldsr_lock_acquire();
- ldsr_interrupt.mask0 |= (mask & ldsr_interrupt.enabled0);
- ldsr_lock_release();
- thread_resume(ldsr_tid);
- return;
- }
-
- mask = (1 << (vector - 32));
- ldsr_lock_acquire();
- ldsr_interrupt.mask1 |= (mask & ldsr_interrupt.enabled1);
- ldsr_lock_release();
- thread_resume(ldsr_tid);
-}
-
-/*
- * ldsr_enable_vector()
- * The LDSR implements an interrupt controller and has a local (to the
- * LDSR) copy of its interrupt mask.
- */
-void ldsr_enable_vector(unsigned int vector)
-{
- unsigned int mask;
- if (vector < 32) {
- mask = (1 << vector);
- ldsr_lock_acquire();
- ldsr_interrupt.enabled0 |= mask;
- ldsr_interrupt.mask0 |= mask;
- ldsr_lock_release();
- thread_resume(ldsr_tid);
- return;
- }
-
- mask = (1 << (vector - 32));
- ldsr_lock_acquire();
- ldsr_interrupt.enabled1 |= mask;
- ldsr_interrupt.mask1 |= mask;
- ldsr_lock_release();
- thread_resume(ldsr_tid);
-}
-
-/*
- * ldsr_disable_vector()
- * The LDSR implements an interrupt controller and has a local (to the
- * LDSR) copy of its interrupt mask.
- */
-void ldsr_disable_vector(unsigned int vector)
-{
- unsigned int mask;
-
- if (vector < 32) {
- mask = ~(1 << vector);
- ldsr_lock_acquire();
- ldsr_interrupt.enabled0 &= mask;
- ldsr_interrupt.mask0 &= mask;
- ldsr_lock_release();
- thread_resume(ldsr_tid);
- return;
- }
-
- mask = ~(1 << (vector - 32));
- ldsr_lock_acquire();
- ldsr_interrupt.enabled1 &= mask;
- ldsr_interrupt.mask1 &= mask;
- ldsr_lock_release();
- thread_resume(ldsr_tid);
-}
-
-/*
- * ldsr_get_threadid()
- * Return the threadid of the LDSR thread.
- */
-thread_t ldsr_get_threadid(void)
-{
- return ldsr_tid;
-}
-
-/*
- * ldsr_set_trap_irq()
- * Save away the trap Soft IRQ
- *
- * See the per thread lock suspend code above for an explination.
- */
-void ldsr_set_trap_irq(unsigned int irq)
-{
- ldsr_trap_irq = irq;
- ldsr_trap_irq_mask = (1 << irq);
- ldsr_suspend_mask |= ldsr_trap_irq_mask;
-}
-
-/*
- * ldsr_init()
- * Initialize the LDSR (Interrupt Controller)
- */
-void ldsr_init(void)
-{
-#if defined(CONFIG_IRQSTACKS)
- int i;
- union irq_ctx *icp;
-#endif
-
- void *stack_high = (void *)ldsr_stack_space;
- stack_high += sizeof(ldsr_stack_space);
- stack_high -= 8;
-
-
- /*
- * Obtain a soft IRQ to use
- */
- if (irq_soft_alloc(&ldsr_soft_irq) < 0) {
- panic("no software IRQ is available\n");
- return;
- }
- ldsr_soft_irq_mask |= (1 << ldsr_soft_irq);
- ldsr_suspend_mask |= ldsr_soft_irq_mask;
-
- /*
- * Now allocate and start the LDSR thread.
- */
- ldsr_tid = thread_alloc();
- if (ldsr_tid < 0) {
- panic("no thread available to run LDSR");
- return;
- }
-
-#if defined(CONFIG_IRQSTACKS)
- /*
- * Initialize the per-cpu irq thread_info structure that
- * is at the top of each per-cpu irq stack.
- */
- icp = (union irq_ctx *)
- (((unsigned long)percpu_irq_stacks + (THREAD_SIZE - 1)) & ~(THREAD_SIZE - 1));
- for (i = 0; i < NR_CPUS; i++) {
- struct thread_info *ti = &(icp->tinfo);
- ti->task = NULL;
- ti->exec_domain = NULL;
- ti->cpu = i;
- ti->preempt_count = 0;
- ti->interrupt_nesting = 0;
- percpu_irq_ctxs[i] = icp++;
- }
-#endif
- thread_start(ldsr_tid, ldsr_thread, NULL,
- stack_high, THREAD_TYPE_NORMAL);
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/module.c
- * Ubicom32 architecture loadable module support.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/moduleloader.h>
-#include <linux/bug.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <asm/ocm-alloc.h>
-
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt...)
-#endif
-
-static void _module_free_ocm(struct module *mod)
-{
- printk(KERN_INFO "module arch cleanup %s: OCM instruction memory free "
- " of %d @%p\n", mod->name, mod->arch.ocm_inst_size,
- mod->arch.ocm_inst);
-
- if (mod->arch.ocm_inst) {
- ocm_inst_free(mod->arch.ocm_inst);
- mod->arch.ocm_inst = 0;
- mod->arch.ocm_inst_size = 0;
- }
-}
-
-void *module_alloc(unsigned long size)
-{
- if (size == 0)
- return NULL;
- return vmalloc(size);
-}
-
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
- vfree(module_region);
- /* FIXME: If module_region == mod->init_region, trim exception
- table entries. */
-
- /*
- * This is expected to be final module free, use this to prune the
- * ocm
- */
- if (module_region && module_region == mod->module_core)
- _module_free_ocm(mod);
-
-}
-
-/*
- * module_frob_arch_sections()
- * Called from kernel/module.c allowing arch specific handling of
- * sections/headers.
- */
-int module_frob_arch_sections(Elf_Ehdr *hdr,
- Elf_Shdr *sechdrs,
- char *secstrings,
- struct module *mod)
-{
- Elf_Shdr *s, *sechdrs_end;
- void *ocm_inst = NULL;
- int ocm_inst_size = 0;
-
- /*
- * Ubicom32 v3 and v4 are almost binary compatible but not completely.
- * To be safe check that the module was compiled with the correct -march
- * which is flags.
- */
-#ifdef CONFIG_UBICOM32_V4
- if ((hdr->e_flags & 0xFFFF) != EF_UBICOM32_V4) {
- printk(KERN_WARNING "Module %s was not compiled for "
- "ubicom32v4, elf_flags:%x,\n",
- mod->name, hdr->e_flags);
- return -ENOEXEC;
- }
-#elif defined CONFIG_UBICOM32_V3
- if ((hdr->e_flags & 0xFFFF) != EF_UBICOM32_V3) {
- printk(KERN_WARNING "Module %s was not compiled for "
- "ubicom32v3, elf_flags:%x\n",
- mod->name, hdr->e_flags);
- return -ENOEXEC;
- }
-#else
-#error Unknown/Unsupported ubicom32 architecture.
-#endif
-
- /*
- * XXX: sechdrs are vmalloced in kernel/module.c
- * and would be vfreed just after module is loaded,
- * so we hack to keep the only information we needed
- * in mod->arch to correctly free L1 I/D sram later.
- * NOTE: this breaks the semantic of mod->arch structure.
- */
- sechdrs_end = sechdrs + hdr->e_shnum;
- for (s = sechdrs; s < sechdrs_end; ++s) {
- if (strncmp(".ocm_text", secstrings + s->sh_name, 9) == 0)
- ocm_inst_size += s->sh_size;
- }
-
- if (!ocm_inst_size)
- return 0;
-
- ocm_inst = ocm_inst_alloc(ocm_inst_size, 0 /* internal */);
- if (ocm_inst == NULL) {
-#ifdef CONFIG_OCM_MODULES_FALLBACK_TO_DDR
- printk(KERN_WARNING
- "module %s: OCM instruction memory allocation of %d"
- "failed, fallback to DDR\n", mod->name, ocm_inst_size);
- return 0;
-#else
- printk(KERN_ERR
- "module %s: OCM instruction memory allocation of %d"
- "failed.\n", mod->name, ocm_inst_size);
- return -ENOMEM;
-#endif
- }
-
- mod->arch.ocm_inst = ocm_inst;
- mod->arch.ocm_inst_size = ocm_inst_size;
-
- printk(KERN_INFO
- "module %s: OCM instruction memory allocation of %d @%p\n",
- mod->name, mod->arch.ocm_inst_size, mod->arch.ocm_inst);
-
- for (s = sechdrs; s < sechdrs_end; ++s) {
- if (strncmp(".ocm_text", secstrings + s->sh_name, 9) == 0) {
- memcpy(ocm_inst, (void *)s->sh_addr, s->sh_size);
- s->sh_flags &= ~SHF_ALLOC;
- s->sh_addr = (unsigned long)ocm_inst;
- ocm_inst += s->sh_size;
- }
- }
-
- return 0;
-}
-
-int apply_relocate(Elf32_Shdr *sechdrs,
- const char *strtab,
- unsigned int symindex,
- unsigned int relsec,
- struct module *me)
-{
- DEBUGP("Invalid Applying relocate section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
- return -EINVAL;
-}
-
-int apply_relocate_add(Elf32_Shdr *sechdrs,
- const char *strtab,
- unsigned int symindex,
- unsigned int relsec,
- struct module *me)
-{
- unsigned int i;
- Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
- Elf32_Sym *sym;
- uint32_t *location;
- uint32_t insn;
-
- DEBUGP("Applying relocate_add section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
- for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
- uint32_t v;
- const int elf32_rtype = ELF32_R_TYPE(rel[i].r_info);
-
- /* This is where to make the change */
- location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
- + rel[i].r_offset;
- /* This is the symbol it is referring to. Note that all
- undefined symbols have been resolved. */
- sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
- + ELF32_R_SYM(rel[i].r_info);
-
- v = rel[i].r_addend + sym->st_value;
-
-
- switch (elf32_rtype) {
- case R_UBICOM32_32:
- {
- /*
- * Store the 32 bit relocation as is.
- */
- *location = v;
- break;
- }
- case R_UBICOM32_HI24:
- {
- /*
- * 24 bit relocation that is part of the MOVEAI
- * instruction. The 24 bits come from bits 7 - 30 of the
- * relocation. Theses bits eventually get split into 2
- * fields in the instruction encoding.
- *
- * - Bits 7 - 27 of the relocation are encoded into bits
- * 0 - 20 of the instruction.
- *
- * - Bits 28 - 30 of the relocation are encoded into
- * bit 24 - 26 of the instruction.
- */
- uint32_t valid24 = (v >> 7) & 0xffffff;
- insn = *location;
-
- insn &= ~(0x1fffff | (0x7 << 24));
- insn |= (valid24 & 0x1fffff);
- insn |= ((valid24 & 0xe00000) << 3);
- *location = insn;
- }
- break;
- case R_UBICOM32_LO7_S:
- case R_UBICOM32_LO7_2_S:
- case R_UBICOM32_LO7_4_S:
- {
- /*
- * Bits 0 - 6 of the relocation are encoded into the
- * 7bit unsigned immediate fields of the SOURCE-1 field
- * of the instruction. The immediate value is left
- * shifted by (0, 1, 2) based on the operand size.
- */
- uint32_t valid7 = v & 0x7f;
- insn = *location;
-
- if (elf32_rtype == R_UBICOM32_LO7_2_S) {
- valid7 >>= 1;
- } else if (elf32_rtype == R_UBICOM32_LO7_4_S) {
- valid7 >>= 2;
- }
-
- insn &= ~(0x1f | (0x3 << 8));
- insn |= (valid7 & 0x1f);
- insn |= ((valid7 & 0x60) << 3);
- *location = insn;
- }
- break;
- case R_UBICOM32_LO7_D:
- case R_UBICOM32_LO7_2_D:
- case R_UBICOM32_LO7_4_D:
- {
- /*
- * Bits 0 - 6 of the relocation are encoded into the
- * 7bit unsigned immediate fields of the DESTINATION
- * field of the instruction. The immediate value is
- * left shifted by (0, 1, 2) based on the operand size.
- */
- uint32_t valid7 = v & 0x7f;
- insn = *location;
-
- if (elf32_rtype == R_UBICOM32_LO7_2_D) {
- valid7 >>= 1;
- } else if (elf32_rtype == R_UBICOM32_LO7_4_D) {
- valid7 >>= 2;
- }
-
- insn &= ~((0x1f | (0x3 << 8)) << 16);
- insn |= ((valid7 & 0x1f) << 16);
- insn |= ((valid7 & 0x60) << 19);
- *location = insn;
- }
- break;
- case R_UBICOM32_LO7_CALLI:
- case R_UBICOM32_LO16_CALLI:
- {
- /*
- * Extract the offset for a CALLI instruction. The
- * offsets can be either 7 bits or 18 bits. Since all
- * instructions in ubicom32 architecture are at work
- * aligned addresses the truncated offset is right
- * shifted by 2 before being encoded in the instruction.
- */
- uint32_t val;
- if (elf32_rtype == R_UBICOM32_LO7_CALLI) {
- val = v & 0x7f;
- } else {
- val = v & 0x3ffff;
- }
-
- val >>= 2;
-
- insn = *location;
-
- insn &= ~0x071f071f;
- insn |= (val & 0x1f) << 0;
- val >>= 5;
- insn |= (val & 0x07) << 8;
- val >>= 3;
- insn |= (val & 0x1f) << 16;
- val >>= 5;
- insn |= (val & 0x07) << 24;
- *location = insn;
- }
- break;
- case R_UBICOM32_24_PCREL:
- {
- /*
- * Extract 26 bit signed PC relative offset for CALL
- * instructions. Since instruction addresses are word
- * aligned the offset is right shited by 2 before
- * encoding into instruction.
- */
- int32_t val = v - (int32_t)location;
-
- /*
- * Check that the top 7 bits are all equal to the sign
- * bit (26), i.e all 0's or all 1's. If they are not then
- * the absolute difference is greater than 25 bits.
- */
- if (((uint32_t)val & 0xFE000000) != 0xFE000000 &&
- ((uint32_t)val & 0xFE000000) != 0x0) {
- /*
- * The relocation is beyond our addressable
- * range with a 26 bit call.
- */
- printk(KERN_ERR "module %s: PC Relative "
- "relocation out of range: "
- "%u (%x->%x, %x)\n",
- me->name, elf32_rtype,
- v, (uint32_t) location, val);
- return -ENOEXEC;
- }
-
- val = (val & 0x3ffffff) >> 2;
- insn = *location;
- insn = insn & 0xf8e00000;
-
- insn |= (val >> 21) << 24;
- insn |= (val & 0x1fffff);
- *location = insn;
- }
- break;
- case R_UBICOM32_LO16:
- case R_UBICOM32_HI16:
- {
- /*
- * 16 bit immediate value that is encoded into bit 0 -
- * 15 of the instruction.
- */
- uint32_t val;
-
- if (elf32_rtype == R_UBICOM32_LO16) {
- val = v & 0xffff;
- } else {
- val = (v >> 16) & 0xffff;
- }
-
- insn = *location;
- insn &= 0xffff0000;
-
- insn |= val;
- *location = insn;
- }
- break;
- case R_UBICOM32_21_PCREL:
- {
- /*
- * Extract 23 bit signed PC relative offset for JMP<cc>
- * instructions. Since instruction addresses are word
- * aligned the offset is right shited by 2 before
- * encoding into instruction.
- */
- int32_t val = v - (int32_t)location;
-
- val = (val & 0x7fffff) >> 2;
- insn = *location;
- insn = insn & 0xffe00000;
-
- insn |= (val >> 21) << 24;
- insn |= val;
- *location = insn;
- }
- break;
- default:
- BUG();
- printk(KERN_ERR "module %s: Unknown relocation: %u\n",
- me->name, elf32_rtype);
- return -ENOEXEC;
- }
- }
- return 0;
-}
-
-int module_finalize(const Elf_Ehdr *hdr,
- const Elf_Shdr *sechdrs,
- struct module *mod)
-{
- unsigned int i, strindex = 0, symindex = 0;
- char *secstrings;
- int err;
-
- err = module_bug_finalize(hdr, sechdrs, mod);
- if (err)
- return err;
-
- if (!mod->arch.ocm_inst) {
- /*
- * No OCM code, so nothing more to do.
- */
- return 0;
- }
-
- secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-
- for (i = 1; i < hdr->e_shnum; i++) {
- /* Internal symbols and strings. */
- if (sechdrs[i].sh_type == SHT_SYMTAB) {
- symindex = i;
- strindex = sechdrs[i].sh_link;
- }
- }
-
- for (i = 1; i < hdr->e_shnum; i++) {
- const char *strtab = (char *)sechdrs[strindex].sh_addr;
- unsigned int info = sechdrs[i].sh_info;
-
- /* Not a valid relocation section? */
- if (info >= hdr->e_shnum)
- continue;
-
- if ((sechdrs[i].sh_type == SHT_RELA) &&
- (strncmp(".rela.ocm_text",
- secstrings + sechdrs[i].sh_name, 5 + 9) == 0)) {
- err = apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
- symindex, i, mod);
- if (err)
- return err;
- }
- }
-
- return 0;
-}
-
-void module_arch_cleanup(struct module *mod)
-{
- module_bug_cleanup(mod);
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/os_node.c
- * <TODO: Replace with short file description>
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- */
-#include "linux/types.h"
-#include "linux/linkage.h"
-#include "linux/uts.h"
-#include "linux/utsrelease.h"
-#include "linux/version.h"
-#include <asm/ocm_size.h>
-#include <asm/devtree.h>
-#include <asm/ip5000.h>
-
-extern asmlinkage void *_start;
-
-/*
- * This file provides static information to the boot code allowing it to decide
- * if the os is compatible. Thus hopefully enabling the boot code to prevent
- * accidentally booting a kernel that has no hope of running.
- */
-struct os_node {
- struct devtree_node node;
- unsigned long version; /* Always 1 */
- unsigned long entry_point;
- const char os_name[32]; /* For diagnostic purposes only */
- const char os_version_str[32];
- unsigned long os_version_num;
- unsigned long expected_ocm_code_start;/* OS Code */
- unsigned long expected_ocm_data_end; /* OS Data */
- unsigned long expected_ram_start;
- unsigned long expected_ram_end;
- unsigned long arch_version;
- unsigned long expected_os_syscall_begin;
- unsigned long expected_os_syscall_end;
-};
-
-
-extern void __os_syscall_begin;
-extern void __os_syscall_end;
-/*
- * The os_node is only referenced by head.S and should never be modified at
- * run-time.
- */
-asmlinkage const struct os_node _os_node = {
- .node = {
- .next = NULL,
- .name = { "OS" },
- .magic = 0x10203040,
- },
- .version = 0x10002,
- .entry_point = (unsigned long)&_start,
-#if APP_OCM_CODE_SIZE || APP_OCM_DATA_SIZE
- .expected_ocm_code_start = OCMSTART + APP_OCM_CODE_SIZE,
- .expected_ocm_data_end = OCMEND - APP_OCM_DATA_SIZE,
-#else
- .expected_ocm_code_start = OCMEND,
- .expected_ocm_data_end = OCMEND,
-#endif
- .os_name = { UTS_SYSNAME },
- .os_version_str = { UTS_RELEASE },
- .os_version_num = LINUX_VERSION_CODE,
- .expected_ram_start = KERNELSTART,
- .expected_ram_end = SDRAMSTART + CONFIG_MIN_RAMSIZE,
- .arch_version = UBICOM32_ARCH_VERSION,
- .expected_os_syscall_begin = (unsigned long)&__os_syscall_begin,
- .expected_os_syscall_end = (unsigned long)&__os_syscall_end,
-
-
-};
+++ /dev/null
-/*
- * arch/ubicom32/kernel/process.c
- * Ubicom32 architecture-dependent process handling.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 1995 Hamish Macdonald
- *
- * 68060 fixes by Jesper Skov
- *
- * uClinux changes
- * Copyright (C) 2000-2002, David McCullough <davidm@snapgear.com>
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-/*
- * This file handles the architecture-dependent parts of process handling..
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/fs.h>
-#include <linux/pm.h>
-
-#include <linux/uaccess.h>
-#include <asm/system.h>
-#include <asm/traps.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/ip5000.h>
-#include <asm/range-protect.h>
-
-#define DUMP_RANGE_REGISTER(REG, IDX) asm volatile ( \
- " move.4 %0, "REG"_RANGE"IDX"_EN \n\t" \
- " move.4 %1, "REG"_RANGE"IDX"_LO \n\t" \
- " move.4 %2, "REG"_RANGE"IDX"_HI \n\t" \
- : "=d"(en), "=d"(lo), "=d"(hi) \
- ); \
- printk(KERN_NOTICE REG"Range"IDX": en:%08x, range: %08x-%08x\n", \
- (unsigned int)en, \
- (unsigned int)lo, \
- (unsigned int)hi)
-
-asmlinkage void ret_from_fork(void);
-
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL(pm_power_off);
-
-/* machine-dependent / hardware-specific power functions */
-void (*mach_reset)(void);
-void (*mach_halt)(void);
-void (*mach_power_off)(void);
-
-/*
- * cpu_idle()
- * The idle thread.
- *
- * Our idle loop suspends and is woken up by a timer interrupt.
- */
-void cpu_idle(void)
-{
- while (1) {
- local_irq_disable();
- while (!need_resched()) {
- local_irq_enable();
- thread_suspend();
- local_irq_disable();
- }
- local_irq_enable();
- preempt_enable_no_resched();
- schedule();
- preempt_disable();
- }
-}
-
-/*
- * dump_fpu()
- *
- * Fill in the fpu structure for a core dump. (just a stub as we don't have
- * an fpu)
- */
-int dump_fpu(struct pt_regs *regs, elf_fpregset_t * fpregs)
-{
- return 1;
-}
-
-/*
- * machine_restart()
- * Resets the system.
- */
-void machine_restart(char *__unused)
-{
- /*
- * Disable all threads except myself. We can do this
- * directly without needing to call smp_send_stop
- * because we have a unique architecture where
- * one thread can disable one or more other threads.
- */
- thread_disable_others();
-
- /*
- * Call the hardware-specific machine reset function.
- */
- if (mach_reset) {
- mach_reset();
- }
-
- printk(KERN_EMERG "System Restarting\n");
-
- /*
- * Set watchdog to trigger (after 1ms delay) (12 Mhz is the fixed OSC)
- */
- UBICOM32_IO_TIMER->tkey = TIMER_TKEYVAL;
- UBICOM32_IO_TIMER->wdcom = UBICOM32_IO_TIMER->mptval +
- (12000000 / 1000);
- UBICOM32_IO_TIMER->wdcfg = 0;
- UBICOM32_IO_TIMER->tkey = 0;
-
- /*
- * Wait for watchdog
- */
- asm volatile (
- " move.4 MT_EN, #0 \n\t"
- " pipe_flush 0 \n\t"
- );
-
- local_irq_disable();
- for (;;) {
- thread_suspend();
- }
-}
-
-/*
- * machine_halt()
- * Halt the machine.
- *
- * Similar to machine_power_off, but don't shut off power. Add code
- * here to freeze the system for e.g. post-mortem debug purpose when
- * possible. This halt has nothing to do with the idle halt.
- */
-void machine_halt(void)
-{
- /*
- * Disable all threads except myself. We can do this
- * directly without needing to call smp_send_stop
- * because we have a unique architecture where
- * one thread can disable one or more other threads.
- */
- thread_disable_others();
-
- /*
- * Call the hardware-specific machine halt function.
- */
- if (mach_halt) {
- mach_halt();
- }
-
- printk(KERN_EMERG "System Halted, OK to turn off power\n");
- local_irq_disable();
- for (;;) {
- thread_suspend();
- }
-}
-
-/*
- * machine_power_off()
- * Turn the power off, if a power off handler is defined, otherwise, spin
- * endlessly.
- */
-void machine_power_off(void)
-{
- /*
- * Disable all threads except myself. We can do this
- * directly without needing to call smp_send_stop
- * because we have a unique architecture where
- * one thread can disable one or more other threads.
- */
- thread_disable_others();
-
- /*
- * Call the hardware-specific machine power off function.
- */
- if (mach_power_off) {
- mach_power_off();
- }
-
- printk(KERN_EMERG "System Halted, OK to turn off power\n");
- local_irq_disable();
- for (;;) {
- thread_suspend();
- }
-}
-
-/*
- * address_is_valid()
- * check if an address is valid -- (for read access)
- */
-static bool address_is_valid(const void *address)
-{
- int addr = (int)address;
- unsigned long socm, eocm, sdram, edram;
-
- if (addr & 3)
- return false;
-
- processor_ocm(&socm, &eocm);
- processor_dram(&sdram, &edram);
- if (addr >= socm && addr < eocm)
- return true;
-
- if (addr >= sdram && addr < edram)
- return true;
-
- return false;
-}
-
-/*
- * vma_path_name_is_valid()
- * check if path_name of a vma is a valid string
- */
-static bool vma_path_name_is_valid(const char *str)
-{
-#define MAX_NAME_LEN 256
- int i = 0;
- if (!address_is_valid(str))
- return false;
-
- for (; i < MAX_NAME_LEN; i++, str++) {
- if (*str == '\0')
- return true;
- }
-
- return false;
-}
-
-/*
- * show_vmas()
- * show vma info of a process
- */
-void show_vmas(struct task_struct *task)
-{
-#ifdef CONFIG_DEBUG_VERBOSE
-#define UBICOM32_MAX_VMA_COUNT 1024
-
- struct vm_area_struct *vma;
- struct file *file;
- char *name = "";
- int flags, loop = 0;
-
- printk(KERN_NOTICE "Start of vma list\n");
-
- if (!address_is_valid(task) || !address_is_valid(task->mm))
- goto error;
-
- vma = task->mm->mmap;
- while (vma) {
- if (!address_is_valid(vma))
- goto error;
-
- flags = vma->vm_flags;
- file = vma->vm_file;
-
- if (file) {
- /* seems better to use dentry op here, but sanity check is easier this way */
- if (!address_is_valid(file) || !address_is_valid(file->f_path.dentry) || !vma_path_name_is_valid(file->f_path.dentry->d_name.name))
- goto error;
-
- name = (char *)file->f_path.dentry->d_name.name;
- }
-
- /* Similar to /proc/pid/maps format */
- printk(KERN_NOTICE "%08lx-%08lx %c%c%c%c %08lx %s\n",
- vma->vm_start,
- vma->vm_end,
- flags & VM_READ ? 'r' : '-',
- flags & VM_WRITE ? 'w' : '-',
- flags & VM_EXEC ? 'x' : '-',
- flags & VM_MAYSHARE ? flags & VM_SHARED ? 'S' : 's' : 'p',
- vma->vm_pgoff << PAGE_SHIFT,
- name);
-
- vma = vma->vm_next;
-
- if (loop++ > UBICOM32_MAX_VMA_COUNT)
- goto error;
- }
-
- printk(KERN_NOTICE "End of vma list\n");
- return;
-
-error:
- printk(KERN_NOTICE "\nCorrupted vma list, abort!\n");
-#endif
-}
-
-/*
- * show_regs()
- * Print out all of the registers.
- */
-void show_regs(struct pt_regs *regs)
-{
- unsigned int i;
- unsigned int en, lo, hi;
-
- printk(KERN_NOTICE "regs: %p, tid: %d\n",
- (void *)regs,
- thread_get_self());
-
- printk(KERN_NOTICE "pc: %08x, previous_pc: %08x\n\n",
- (unsigned int)regs->pc,
- (unsigned int)regs->previous_pc);
-
- printk(KERN_NOTICE "Data registers\n");
- for (i = 0; i < 16; i++) {
- printk("D%02d: %08x, ", i, (unsigned int)regs->dn[i]);
- if ((i % 4) == 3) {
- printk("\n");
- }
- }
- printk("\n");
-
- printk(KERN_NOTICE "Address registers\n");
- for (i = 0; i < 8; i++) {
- printk("A%02d: %08x, ", i, (unsigned int)regs->an[i]);
- if ((i % 4) == 3) {
- printk("\n");
- }
- }
- printk("\n");
-
- printk(KERN_NOTICE "acc0: %08x-%08x, acc1: %08x-%08x\n",
- (unsigned int)regs->acc0[1],
- (unsigned int)regs->acc0[0],
- (unsigned int)regs->acc1[1],
- (unsigned int)regs->acc1[0]);
-
- printk(KERN_NOTICE "mac_rc16: %08x, source3: %08x\n",
- (unsigned int)regs->mac_rc16,
- (unsigned int)regs->source3);
-
- printk(KERN_NOTICE "inst_cnt: %08x, csr: %08x\n",
- (unsigned int)regs->inst_cnt,
- (unsigned int)regs->csr);
-
- printk(KERN_NOTICE "int_mask0: %08x, int_mask1: %08x\n",
- (unsigned int)regs->int_mask0,
- (unsigned int)regs->int_mask1);
-
- /*
- * Dump range registers
- */
- DUMP_RANGE_REGISTER("I", "0");
- DUMP_RANGE_REGISTER("I", "1");
- DUMP_RANGE_REGISTER("I", "2");
- DUMP_RANGE_REGISTER("I", "3");
- DUMP_RANGE_REGISTER("D", "0");
- DUMP_RANGE_REGISTER("D", "1");
- DUMP_RANGE_REGISTER("D", "2");
- DUMP_RANGE_REGISTER("D", "3");
- DUMP_RANGE_REGISTER("D", "4");
-
- printk(KERN_NOTICE "frame_type: %d, nesting_level: %d, thread_type %d\n\n",
- (int)regs->frame_type,
- (int)regs->nesting_level,
- (int)regs->thread_type);
-}
-
-/*
- * kernel_thread_helper()
- * On execution d0 will be 0, d1 will be the argument to be passed to the
- * kernel function. d2 contains the kernel function that needs to get
- * called. d3 will contain address to do_exit which need to get moved
- * into a5. On return from fork the child thread d0 will be 0. We call
- * this dummy function which in turn loads the argument
- */
-asmlinkage void kernel_thread_helper(void);
-
-/*
- * kernel_thread()
- * Create a kernel thread
- */
-int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
-{
- struct pt_regs regs;
-
- memset(®s, 0, sizeof(regs));
-
- regs.dn[1] = (unsigned long)arg;
- regs.dn[2] = (unsigned long)fn;
- regs.dn[3] = (unsigned long)do_exit;
- regs.an[5] = (unsigned long)kernel_thread_helper;
- regs.pc = (unsigned long)kernel_thread_helper;
- regs.nesting_level = 0;
- regs.thread_type = KERNEL_THREAD;
-
- return do_fork(flags | CLONE_VM | CLONE_UNTRACED,
- 0, ®s, 0, NULL, NULL);
-}
-EXPORT_SYMBOL(kernel_thread);
-
-/*
- * flush_thread()
- * XXX todo
- */
-void flush_thread(void)
-{
- /* XXX todo */
-}
-
-/*
- * sys_fork()
- * Not implemented on no-mmu.
- */
-asmlinkage int sys_fork(struct pt_regs *regs)
-{
- /* fork almost works, enough to trick you into looking elsewhere :-( */
- return -EINVAL;
-}
-
-/*
- * sys_vfork()
- * By the time we get here, the non-volatile registers have also been saved
- * on the stack. We do some ugly pointer stuff here.. (see also copy_thread
- * which does context copy).
- */
-asmlinkage int sys_vfork(struct pt_regs *regs)
-{
- unsigned long old_sp = regs->an[7];
- unsigned long old_a5 = regs->an[5];
- unsigned long old_return_address;
- long do_fork_return;
-
- /*
- * Read the old retrun address from the stack.
- */
- if (copy_from_user(&old_return_address,
- (void *)old_sp, sizeof(unsigned long))) {
- force_sig(SIGSEGV, current);
- return 0;
- }
-
- /*
- * Pop the vfork call frame by setting a5 and pc to the old_return
- * address and incrementing the stack pointer by 4.
- */
- regs->an[5] = old_return_address;
- regs->pc = old_return_address;
- regs->an[7] += 4;
-
- do_fork_return = do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD,
- regs->an[7], regs, 0, NULL, NULL);
-
- /*
- * Now we have to test if the return code is an error. If it is an error
- * then restore the frame and we will execute error processing in user
- * space. Other wise the child and the parent will return to the correct
- * places.
- */
- if ((unsigned long)(do_fork_return) >= (unsigned long)(-125)) {
- /*
- * Error case. We need to restore the frame.
- */
- regs->an[5] = old_a5;
- regs->pc = old_a5;
- regs->an[7] = old_sp;
- }
-
- return do_fork_return;
-}
-
-/*
- * sys_clone()
- * creates a child thread.
- */
-asmlinkage int sys_clone(unsigned long clone_flags,
- unsigned long newsp,
- struct pt_regs *regs)
-{
- if (!newsp)
- newsp = regs->an[7];
- return do_fork(clone_flags, newsp, regs, 0,
- NULL, NULL);
-}
-
-/*
- * copy_thread()
- * low level thread copy, only used by do_fork in kernel/fork.c
- */
-int copy_thread(unsigned long clone_flags,
- unsigned long usp, unsigned long topstk,
- struct task_struct *p, struct pt_regs *regs)
-
-{
- struct pt_regs *childregs;
-
- childregs = (struct pt_regs *)
- (task_stack_page(p) + THREAD_SIZE - 8) - 1;
-
- *childregs = *regs;
-
- /*
- * Set return value for child to be 0.
- */
- childregs->dn[0] = 0;
-
- if (usp)
- childregs->an[7] = usp;
- else
- childregs->an[7] = (unsigned long)task_stack_page(p) +
- THREAD_SIZE - 8;
-
- /*
- * Set up the switch_to frame to return to "ret_from_fork"
- */
- p->thread.a5 = (unsigned long)ret_from_fork;
- p->thread.sp = (unsigned long)childregs;
-
- return 0;
-}
-
-/*
- * sys_execve()
- * executes a new program.
- */
-asmlinkage int sys_execve(char *name, char **argv,
- char **envp, struct pt_regs *regs)
-{
- int error;
- char *filename;
-
- lock_kernel();
- filename = getname(name);
- error = PTR_ERR(filename);
- if (IS_ERR(filename))
- goto out;
- error = do_execve(filename, argv, envp, regs);
- putname(filename);
- asm (" .global sys_execve_complete\n"
- " sys_execve_complete:");
-out:
- unlock_kernel();
- return error;
-}
-
-/*
- * Return saved PC of a blocked thread.
- */
-unsigned long thread_saved_pc(struct task_struct *tsk)
-{
- return tsk->thread.a5;
-}
-
-
-unsigned long get_wchan(struct task_struct *p)
-{
- unsigned long pc;
-
- /*
- * If we don't have a process, or it is not the current
- * one or not RUNNING, it makes no sense to ask for a
- * wchan.
- */
- if (!p || p == current || p->state == TASK_RUNNING)
- return 0;
-
- /*
- * TODO: If the process is in the middle of schedule, we
- * are supposed to do something different but for now we
- * will return the same thing in both situations.
- */
- pc = thread_saved_pc(p);
- if (in_sched_functions(pc))
- return pc;
- return pc;
-}
-
-
-/*
- * Infrequently used interface to dump task registers to core files.
- */
-int dump_task_regs(struct task_struct *task, elf_gregset_t *elfregs)
-{
- struct pt_regs *regs = task_pt_regs(task);
- *(struct pt_regs *)elfregs = *regs;
-
- return 1;
-}
-
-/*
- * __switch_to is the function that implements the contex save and
- * switch within the kernel. Since this is a function call very few
- * registers have to be saved to pull this off. d0 holds prev and we
- * want to preserve it. prev_switch is a pointer to task->thread
- * structure. This is where we will save the register state. next_switch
- * is pointer to the next task's thread structure that holds the
- * registers.
- */
-asmlinkage void *__switch_to(struct task_struct *prev,
- struct thread_struct *prev_switch,
- struct thread_struct *next_switch)
- __attribute__((naked));
+++ /dev/null
-/*
- * arch/ubicom32/kernel/processor.c
- * Ubicom32 architecture processor info implementation.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/profile.h>
-#include <linux/clocksource.h>
-#include <linux/types.h>
-#include <linux/seq_file.h>
-#include <linux/delay.h>
-#include <linux/cpu.h>
-#include <asm/devtree.h>
-#include <asm/processor.h>
-#include <asm/cpu.h>
-#include <asm/ocm_size.h>
-
-struct procnode {
- struct devtree_node dn;
- unsigned int threads;
- unsigned int timers;
- unsigned int frequency;
- unsigned int ddr_frequency;
- unsigned int interrupt0;
- unsigned int interrupt1;
- void *socm;
- void *eocm;
- void *sdram;
- void *edram;
- unsigned int arch_version;
- void *os_syscall_begin;
- void *os_syscall_end;
-};
-
-struct procnode *pn;
-
-/*
- * show_processorinfo()
- * Print the actual processor information.
- */
-static void show_processorinfo(struct seq_file *m)
-{
- char *cpu, *mmu, *fpu;
- unsigned int clockfreq;
- unsigned int chipid;
-
- cpu = CPU;
- mmu = "none";
- fpu = "none";
-
- asm volatile (
- "move.4 %0, CHIP_ID \n\t"
- : "=r" (chipid)
- );
-
- /*
- * General Processor Information.
- */
- seq_printf(m, "Vendor:\t\t%s\n", "Ubicom");
- seq_printf(m, "CPU:\t\t%s\n", cpu);
- seq_printf(m, "MMU:\t\t%s\n", mmu);
- seq_printf(m, "FPU:\t\t%s\n", fpu);
- seq_printf(m, "Arch:\t\t%hx\n", chipid >> 16);
- seq_printf(m, "Rev:\t\t%hx\n", (chipid & 0xffff));
-
- /*
- * Now compute the clock frequency in Mhz.
- */
- clockfreq = processor_frequency();
- seq_printf(m, "Clock Freq:\t%u.0 MHz\n",
- clockfreq / 1000000);
- seq_printf(m, "DDR Freq:\t%u.0 MHz\n",
- pn ? pn->ddr_frequency / 1000000 : 0);
- seq_printf(m, "BogoMips:\t%lu.%02lu\n",
- (loops_per_jiffy * HZ) / 500000,
- ((loops_per_jiffy * HZ) / 5000) % 100);
- seq_printf(m, "Calibration:\t%lu loops\n", (loops_per_jiffy * HZ));
-}
-
-/*
- * show_cpuinfo()
- * Get CPU information for use by the procfs.
- */
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
- unsigned long n = (unsigned long)v - 1;
-
-#if defined(CONFIG_SMP)
- struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, n);
-#endif
-
- /*
- * Print the general processor information on the first
- * call.
- */
- if (n == 0) {
- show_processorinfo(m);
- }
-
-#if defined(CONFIG_SMP)
- /*
- * For each hwthread, print if this hwthread is running Linux
- * or is an I/O thread.
- */
- if (cpu_isset(n, cpu_online_map)) {
- seq_printf(m, "cpu[%02lu]:\tthread id - %lu\n", n, p->tid);
- } else {
- seq_printf(m, "cpu[%02lu]:\toff-line\n", n);
- }
-#endif
- return 0;
-
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
- unsigned long i = *pos;
-
- return i < NR_CPUS ? (void *)(i + 1) : NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
- ++*pos;
- return c_start(m, pos);
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
- .start = c_start,
- .next = c_next,
- .stop = c_stop,
- .show = show_cpuinfo,
-};
-
-/*
- * processor_timers()
- * Returns the timers available to Linux.
- */
-unsigned int processor_timers(void)
-{
- if (!pn) {
- return 0;
- }
- return pn->timers;
-}
-
-/*
- * processor_threads()
- * Returns the threads available to Linux.
- */
-unsigned int processor_threads(void)
-{
- if (!pn) {
- return 0;
- }
- return pn->threads;
-}
-
-/*
- * processor_frequency()
- * Returns the frequency of the system clock.
- */
-unsigned int processor_frequency(void)
-{
- if (!pn) {
- return 0;
- }
- return pn->frequency;
-}
-EXPORT_SYMBOL(processor_frequency);
-
-/*
- * processor_interrupts()
- * Return the interrupts that are setup at boot time.
- */
-int processor_interrupts(unsigned int *int0, unsigned int *int1)
-{
- if (!pn) {
- return -EFAULT;
- }
-
- if (int0) {
- *int0 = pn->interrupt0;
- }
-
- if (int1) {
- *int1 = pn->interrupt1;
- }
- return 0;
-}
-
-/*
- * processor_ocm()
- * Returns the start and end of OCM available to Linux.
- */
-void processor_ocm(unsigned long *socm, unsigned long *eocm)
-{
- *socm = (unsigned long)pn->socm;
- *eocm = (unsigned long)pn->eocm;
-}
-
-/*
- * processor_dram()
- * Returns the start and end of dram available to Linux.
- */
-void processor_dram(unsigned long *sdram, unsigned long *edram)
-{
- *sdram = (unsigned long)pn->sdram;
- *edram = (unsigned long)pn->edram;
-}
-
-/*
- * processor_validate_failed()
- * Returns the dram available to Linux.
- */
-static noinline void processor_validate_failed(void)
-{
- while (1)
- THREAD_STALL;
-}
-
-/*
- * processor_validate()
- * Validates the procnode against limitations of this link/built.
- */
-static void processor_validate(void)
-{
- void *dram_start = (void *)(KERNELSTART);
- void *dram_end = (void *)(SDRAMSTART + CONFIG_MIN_RAMSIZE);
-#if APP_OCM_CODE_SIZE || APP_OCM_DATA_SIZE
- void *ocm_code_start = (void *)(OCMSTART + APP_OCM_CODE_SIZE);
- void *ocm_data_end = (void *)(OCMEND - APP_OCM_DATA_SIZE);
-#endif
- extern void __os_syscall_begin;
- extern void __os_syscall_end;
- int proc_node_valid = 1;
-
- if (!pn) {
- printk(KERN_ERR "ERROR: processor node not found\n");
- goto error;
- }
-
-
- if (dram_start < pn->sdram || dram_end > pn->edram) {
- printk(KERN_ERR "ERROR: processor dram mismatch %p-%p "
- "available but we are expecting %p-%p\n",
- pn->sdram, pn->edram, dram_start, dram_end);
- proc_node_valid = 0;
- } else {
- printk(KERN_ERR "processor dram %p-%p, expecting %p-%p\n",
- pn->sdram, pn->edram, dram_start, dram_end);
- }
- if (&__os_syscall_begin < pn->os_syscall_begin ||
- &__os_syscall_end > pn->os_syscall_end) {
- printk(KERN_ERR "ERROR: processor syscall area mismatch "
- "%p-%p available but we are expecting %p-%p\n",
- pn->os_syscall_begin, pn->os_syscall_end,
- &__os_syscall_begin, &__os_syscall_end);
- proc_node_valid = 0;
- } else {
- printk(KERN_ERR "processor dram %p-%p, expecting %p-%p\n",
- pn->sdram, pn->edram, dram_start, dram_end);
- }
-#if APP_OCM_CODE_SIZE || APP_OCM_DATA_SIZE
- if (ocm_code_start < pn->socm || ocm_data_end > pn->eocm) {
- printk(KERN_ERR "ERROR: processor ocm mismatch %p-%p "
- "available but we are expecting %p-%p\n",
- pn->socm, pn->eocm, ocm_code_start, ocm_data_end);
- proc_node_valid = 0;
- } else {
- printk(KERN_INFO "processor ocm %p-%p, expecting %p-%p\n",
- pn->socm, pn->eocm, ocm_code_start, ocm_data_end);
-
- }
-#endif
-
- if (UBICOM32_ARCH_VERSION != pn->arch_version) {
- printk(KERN_ERR "ERROR: processor arch mismatch, kernel"
- "compiled for %d found %d\n",
- UBICOM32_ARCH_VERSION, pn->arch_version);
- proc_node_valid = 0;
- }
-
- if (proc_node_valid)
- return;
-error:
- processor_validate_failed();
-}
-
-void __init processor_init(void)
-{
- /*
- * If we do not have a trap node in the device tree, we leave the fault
- * handling to the underlying hardware.
- */
- pn = (struct procnode *)devtree_find_node("processor");
-
- processor_validate();
-
- /*
- * If necessary correct the initial range registers to cover the
- * complete physical space
- */
- if (pn->edram > (void *)(SDRAMSTART + CONFIG_MIN_RAMSIZE)) {
- printk(KERN_INFO "updating range registers for expanded dram\n");
- asm volatile (
- " move.4 D_RANGE1_HI, %0 \t\n"
- " move.4 I_RANGE0_HI, %0 \t\n"
-#ifdef CONFIG_PROTECT_KERNEL
- " move.4 D_RANGE2_HI, %0 \t\n"
- " move.4 I_RANGE2_HI, %0 \t\n"
-#endif
- : : "a"((unsigned long)pn->edram - 4)
- );
- }
-
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/ptrace.c
- * Ubicom32 architecture ptrace implementation.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * (C) 1994 by Hamish Macdonald
- * Taken from linux/kernel/ptrace.c and modified for M680x0.
- * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/signal.h>
-#include <linux/uaccess.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/cacheflush.h>
-#include <asm/processor.h>
-
-/*
- * ptrace_getregs()
- *
- * Get all user integer registers.
- */
-static inline int ptrace_getregs(struct task_struct *task, void __user *uregs)
-{
- struct pt_regs *regs = task_pt_regs(task);
- return copy_to_user(uregs, regs, sizeof(struct pt_regs)) ? -EFAULT : 0;
-}
-
-/*
- * ptrace_get_reg()
- *
- * Get contents of register REGNO in task TASK.
- */
-static unsigned long ptrace_get_reg(struct task_struct *task, int regno)
-{
- if (regno < sizeof(struct pt_regs)) {
- struct pt_regs *pt_regs = task_pt_regs(task);
- return *(unsigned long *)((long) pt_regs + regno);
- }
-
- return -EIO;
-}
-
-/*
- * ptrace_put_reg()
- * Write contents of register REGNO in task TASK.
- */
-static int ptrace_put_reg(struct task_struct *task, int regno,
- unsigned long data)
-{
- if (regno <= sizeof(struct pt_regs) && regno != PT_FRAME_TYPE) {
- struct pt_regs *pt_regs = task_pt_regs(task);
- *(unsigned long *)((long) pt_regs + regno) = data;
- return 0;
- }
- return -EIO;
-}
-
-/*
- * ptrace_disable_single_step()
- * Disable Single Step
- */
-static int ptrace_disable_single_step(struct task_struct *task)
-{
- /*
- * Single Step not yet implemented, so must always be disabled
- */
- return 0;
-}
-
-/*
- * ptrace_disable()
- * Make sure the single step bit is not set.
- * Called by kernel/ptrace.c when detaching..
- */
-void ptrace_disable(struct task_struct *child)
-{
- ptrace_disable_single_step(child);
-}
-
-/*
- * arch_ptrace()
- * architecture specific ptrace routine.
- */
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
-{
- int ret;
- switch (request) {
- /* when I and D space are separate, these will need to be fixed. */
- case PTRACE_PEEKTEXT: /* read word at location addr. */
- case PTRACE_PEEKDATA:
- ret = generic_ptrace_peekdata(child, addr, data);
- break;
-
- /* read the word at location addr in the USER area. */
- case PTRACE_PEEKUSR: {
- unsigned long tmp;
-
- ret = -EIO;
- if (((unsigned long) addr > PT_INTERP_FDPIC_LOADMAP)
- || (addr & 3))
- break;
-
- tmp = 0; /* Default return condition */
-
- ret = -EIO;
- if (addr < sizeof(struct pt_regs)) {
- tmp = ptrace_get_reg(child, addr);
- } else if (addr == PT_TEXT_ADDR) {
- tmp = child->mm->start_code;
- } else if (addr == PT_TEXT_END_ADDR) {
- tmp = child->mm->end_code;
- } else if (addr == PT_DATA_ADDR) {
- tmp = child->mm->start_data;
- } else if (addr == PT_EXEC_FDPIC_LOADMAP) {
-#ifdef CONFIG_BINFMT_ELF_FDPIC
- tmp = child->mm->context.exec_fdpic_loadmap;
-#endif
- } else if (addr == PT_INTERP_FDPIC_LOADMAP) {
-#ifdef CONFIG_BINFMT_ELF_FDPIC
- tmp = child->mm->context.interp_fdpic_loadmap;
-#endif
- } else {
- break;
- }
-
- ret = put_user(tmp, (unsigned long *)data);
- break;
- }
-
- case PTRACE_POKETEXT: /* write the word at location addr. */
- case PTRACE_POKEDATA:
- ret = generic_ptrace_pokedata(child, addr, data);
-
- /*
- * If we just changed some code so we need to
- * correct the caches
- */
- if (request == PTRACE_POKETEXT && ret == 0) {
- flush_icache_range(addr, addr + 4);
- }
- break;
-
- case PTRACE_POKEUSR: /* write the word at location addr
- * in the USER area */
- ret = -EIO;
-
- if (((unsigned long) addr > PT_DATA_ADDR) || (addr & 3))
- break;
-
- if (addr < sizeof(struct pt_regs)) {
- ret = ptrace_put_reg(child, addr, data);
- }
- break;
-
- case PTRACE_SYSCALL: /* continue and stop at next (return from)
- * syscall */
- case PTRACE_CONT: { /* restart after signal. */
-
- ret = -EIO;
- if (!valid_signal(data))
- break;
- if (request == PTRACE_SYSCALL)
- set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- else
- clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- child->exit_code = data;
- /* make sure the single step bit is not set. */
- ptrace_disable_single_step(child);
- wake_up_process(child);
- ret = 0;
- break;
- }
-
- /*
- * make the child exit. Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to exit.
- */
- case PTRACE_KILL: {
- ret = 0;
- if (child->exit_state == EXIT_ZOMBIE) /* already dead */
- break;
- child->exit_code = SIGKILL;
- /* make sure the single step bit is not set. */
- ptrace_disable_single_step(child);
- wake_up_process(child);
- break;
- }
-
- case PTRACE_DETACH: /* detach a process that was attached. */
- ret = ptrace_detach(child, data);
- break;
-
- case PTRACE_GETREGS: /* Get all gp regs from the child. */
- ptrace_getregs(child, (unsigned long *)data);
- ret = 0;
- break;
-
- case PTRACE_SETREGS: { /* Set all gp regs in the child. */
- int i;
- unsigned long tmp;
- int count = sizeof(struct pt_regs) / sizeof(unsigned long);
- for (i = 0; i < count; i++) {
- if (get_user(tmp, (unsigned long *) data)) {
- ret = -EFAULT;
- break;
- }
- ptrace_put_reg(child, sizeof(unsigned long) * i, tmp);
- data += sizeof(long);
- }
- ret = 0;
- break;
- }
-
- default:
- return ptrace_request(child, request, addr, data);
- break;
- }
- return ret;
-}
-/*
- * syscall_trace
- *
- * called by syscall enter/exit when the TIF_SYSCALL_TRACE bit is set.
- */
-asmlinkage void syscall_trace(void)
-{
- struct task_struct *cur = current;
- if (!test_thread_flag(TIF_SYSCALL_TRACE))
- return;
- if (!(cur->ptrace & PT_PTRACED))
- return;
- ptrace_notify(SIGTRAP | ((cur->ptrace & PT_TRACESYSGOOD)
- ? 0x80 : 0));
- /*
- * this isn't the same as continuing with a signal, but it will do
- * for normal use. strace only continues with a signal if the
- * stopping signal is not SIGTRAP. -brl
- */
- if (cur->exit_code) {
- send_sig(cur->exit_code, current, 1);
- current->exit_code = 0;
- }
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/semaphore.c
- * Ubicom32 architecture semaphore implementation.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-/*
- * Generic semaphore code. Buyer beware. Do your own
- * specific changes in <asm/semaphore-helper.h>
- */
-
-#include <linux/sched.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <asm/semaphore-helper.h>
-
-#ifndef CONFIG_RMW_INSNS
-spinlock_t semaphore_wake_lock;
-#endif
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to sleep, while the "waking" variable is
- * incremented when the "up()" code goes to wake up waiting
- * processes.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * waking_non_zero() (from asm/semaphore.h) must execute
- * atomically.
- *
- * When __up() is called, the count was negative before
- * incrementing it, and we need to wake up somebody.
- *
- * This routine adds one to the count of processes that need to
- * wake up and exit. ALL waiting processes actually wake up but
- * only the one that gets to the "waking" field first will gate
- * through and acquire the semaphore. The others will go back
- * to sleep.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-void __up(struct semaphore *sem)
-{
- wake_one_more(sem);
- wake_up(&sem->wait);
-}
-
-/*
- * Perform the "down" function. Return zero for semaphore acquired,
- * return negative for signalled out of the function.
- *
- * If called from __down, the return is ignored and the wait loop is
- * not interruptible. This means that a task waiting on a semaphore
- * using "down()" cannot be killed until someone does an "up()" on
- * the semaphore.
- *
- * If called from __down_interruptible, the return value gets checked
- * upon return. If the return value is negative then the task continues
- * with the negative value in the return register (it can be tested by
- * the caller).
- *
- * Either form may be used in conjunction with "up()".
- *
- */
-
-
-#define DOWN_HEAD(task_state) \
- \
- \
- current->state = (task_state); \
- add_wait_queue(&sem->wait, &wait); \
- \
- /* \
- * Ok, we're set up. sem->count is known to be less than zero \
- * so we must wait. \
- * \
- * We can let go the lock for purposes of waiting. \
- * We re-acquire it after awaking so as to protect \
- * all semaphore operations. \
- * \
- * If "up()" is called before we call waking_non_zero() then \
- * we will catch it right away. If it is called later then \
- * we will have to go through a wakeup cycle to catch it. \
- * \
- * Multiple waiters contend for the semaphore lock to see \
- * who gets to gate through and who has to wait some more. \
- */ \
- for (;;) {
-
-#define DOWN_TAIL(task_state) \
- current->state = (task_state); \
- } \
- current->state = TASK_RUNNING; \
- remove_wait_queue(&sem->wait, &wait);
-
-void __sched __down(struct semaphore *sem)
-{
- DECLARE_WAITQUEUE(wait, current);
-
- DOWN_HEAD(TASK_UNINTERRUPTIBLE)
- if (waking_non_zero(sem))
- break;
- schedule();
- DOWN_TAIL(TASK_UNINTERRUPTIBLE)
-}
-
-int __sched __down_interruptible(struct semaphore *sem)
-{
- DECLARE_WAITQUEUE(wait, current);
- int ret = 0;
-
- DOWN_HEAD(TASK_INTERRUPTIBLE)
-
- ret = waking_non_zero_interruptible(sem, current);
- if (ret) {
- if (ret == 1)
- /* ret != 0 only if we get interrupted -arca */
- ret = 0;
- break;
- }
- schedule();
- DOWN_TAIL(TASK_INTERRUPTIBLE)
- return ret;
-}
-
-int __down_trylock(struct semaphore *sem)
-{
- return waking_non_zero_trylock(sem);
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/setup.c
- * Ubicom32 architecture-dependent parts of system setup.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 1999-2007 Greg Ungerer (gerg@snapgear.com)
- * Copyright (C) 1998,1999 D. Jeff Dionne <jeff@uClinux.org>
- * Copyleft ()) 2000 James D. Schettine {james@telos-systems.com}
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
- * Copyright (C) 1995 Hamish Macdonald
- * Copyright (C) 2000 Lineo Inc. (www.lineo.com)
- * Copyright (C) 2001 Lineo, Inc. <www.lineo.com>
- * 68VZ328 Fixes/support Evan Stawnyczy <e@lineo.ca>
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/module.h>
-#include <linux/console.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-
-#include <asm/devtree.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/ubicom32-common.h>
-#include <asm/processor.h>
-#include <asm/bootargs.h>
-#include <asm/thread.h>
-
-unsigned long memory_start;
-EXPORT_SYMBOL(memory_start);
-
-unsigned long memory_end;
-EXPORT_SYMBOL(memory_end);
-
-static char __initdata command_line[COMMAND_LINE_SIZE];
-#ifdef CONFIG_CMDLINE_BOOL
-static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
-#endif
-
-extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
-
-/*
- * setup_arch()
- * Setup the architecture dependent portions of the system.
- */
-void __init setup_arch(char **cmdline_p)
-{
- int bootmap_size;
- unsigned long ram_start;
-
- processor_init();
- bootargs_init();
-
- /*
- * Use the link for memory_start from the link and the processor
- * node for memory_end.
- */
- memory_start = PAGE_ALIGN(((unsigned long)&_end));
- processor_dram(&ram_start, &memory_end);
-
- init_mm.start_code = (unsigned long) &_stext;
- init_mm.end_code = (unsigned long) &_etext;
- init_mm.end_data = (unsigned long) &_edata;
- init_mm.brk = (unsigned long) 0;
-
- /*
- * bootexec copies the original default command line to end of memory.
- * u-boot can modify it there (i.e. to enable network boot) and the
- * kernel picks up the modified version.
- *
- * mainexec creates a `new default' command_line which is in the
- * bootargs devnode. It is updated on every firmware update but
- * not used at the moment.
- */
- strlcpy(boot_command_line, (char *)(memory_end - COMMAND_LINE_SIZE), COMMAND_LINE_SIZE);
-
-#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_OVERRIDE
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-#else
- if (builtin_cmdline[0]) {
- /* append boot loader cmdline to builtin */
- strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
- strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- }
-#endif
-#endif
-
- strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
-
- parse_early_param();
-
- printk(KERN_INFO "%s Processor, Ubicom, Inc. <www.ubicom.com>\n", CPU);
-
-#if defined(DEBUG)
- printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
- "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
- (int) &_sdata, (int) &_edata,
- (int) &_sbss, (int) &_ebss);
- printk(KERN_DEBUG "MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ",
- (int) &_ebss, (int) memory_start,
- (int) memory_start, (int) memory_end);
-#endif
-
-#ifdef DEBUG
- if (strlen(*cmdline_p))
- printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p);
-#endif
-
-#if defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_DUMMY_CONSOLE)
- conswitchp = &dummy_con;
-#endif
-
- /*
- * If we have a device tree, see if we have the nodes we need.
- */
- if (devtree) {
- devtree_print();
- }
-
- /*
- * From the arm initialization comment:
- *
- * This doesn't seem to be used by the Linux memory manager any
- * more, but is used by ll_rw_block. If we can get rid of it, we
- * also get rid of some of the stuff above as well.
- *
- * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
- * the system, not the maximum PFN.
- */
- max_pfn = max_low_pfn = (memory_end - PAGE_OFFSET) >> PAGE_SHIFT;
-
- /*
- * Give all the memory to the bootmap allocator, tell it to put the
- * boot mem_map at the start of memory.
- */
- bootmap_size = init_bootmem_node(
- NODE_DATA(0),
- memory_start >> PAGE_SHIFT, /* map goes here */
- PAGE_OFFSET >> PAGE_SHIFT, /* 0 on coldfire */
- memory_end >> PAGE_SHIFT);
- /*
- * Free the usable memory, we have to make sure we do not free
- * the bootmem bitmap so we then reserve it after freeing it :-)
- */
- free_bootmem(memory_start, memory_end - memory_start);
- reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
-
- /*
- * Get kmalloc into gear.
- */
- paging_init();
-
- /*
- * Fix up the thread_info structure, indicate this is a mainline Linux
- * thread and setup the sw_ksp().
- */
- sw_ksp[thread_get_self()] = (unsigned int) current_thread_info();
- thread_set_mainline(thread_get_self());
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/signal.c
- * Ubicom32 architecture signal handling implementation.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 1991, 1992 Linus Torvalds
- * Linux/m68k support by Hamish Macdonald
- * 68060 fixes by Jesper Skov
- * 1997-12-01 Modified for POSIX.1b signals by Andreas Schwab
- * mathemu support by Roman Zippel
- * ++roman (07/09/96): implemented signal stacks
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- *
- * mathemu support by Roman Zippel
- * (Note: fpstate in the signal context is completely ignored for the emulator
- * and the internal floating point format is put on stack)
- *
- * ++roman (07/09/96): implemented signal stacks (specially for tosemu on
- * Atari :-) Current limitation: Only one sigstack can be active at one time.
- * If a second signal with SA_ONSTACK set arrives while working on a sigstack,
- * SA_ONSTACK is ignored. This behaviour avoids lots of trouble with nested
- * signal handlers!
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/syscalls.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/highuid.h>
-#include <linux/tty.h>
-#include <linux/personality.h>
-#include <linux/binfmts.h>
-
-#include <asm/setup.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/traps.h>
-#include <asm/ucontext.h>
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-/*
- * asm signal return handlers.
- */
-void ret_from_user_signal(void);
-void ret_from_user_rt_signal(void);
-asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs);
-
-/*
- * Common signal suspend implementation
- */
-static int signal_suspend(sigset_t *saveset, struct pt_regs *regs)
-{
- regs->dn[0] = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (!do_signal(saveset, regs)) {
- continue;
- }
- /*
- * If the current frame type is a signal trampoline we are
- * actually going to call the signal handler so we return the
- * desired d0 as the return value.
- */
- if (regs->frame_type == UBICOM32_FRAME_TYPE_SIGTRAMP) {
- return regs->dn[0];
- }
- return -EINTR;
- }
- /*
- * Should never get here
- */
- BUG();
- return 0;
-}
-
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int do_sigsuspend(struct pt_regs *regs)
-{
- old_sigset_t mask = regs->dn[0];
- sigset_t saveset;
-
- mask &= _BLOCKABLE;
- spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
- siginitset(¤t->blocked, mask);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- /*
- * Call common handler
- */
- return signal_suspend(&saveset, regs);
-}
-
-asmlinkage int
-do_rt_sigsuspend(struct pt_regs *regs)
-{
- sigset_t *unewset = (sigset_t *)regs->dn[0];
- size_t sigsetsize = (size_t)regs->dn[1];
- sigset_t saveset, newset;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
-
- if (copy_from_user(&newset, unewset, sizeof(newset)))
- return -EFAULT;
- sigdelsetmask(&newset, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
- current->blocked = newset;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- /*
- * Call common handler
- */
- return signal_suspend(&saveset, regs);
-}
-
-asmlinkage int
-sys_sigaction(int sig, const struct old_sigaction *act,
- struct old_sigaction *oact)
-{
- struct k_sigaction new_ka, old_ka;
- int ret;
-
- if (act) {
- old_sigset_t mask;
- if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
- __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
- __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
- return -EFAULT;
- __get_user(new_ka.sa.sa_flags, &act->sa_flags);
- __get_user(mask, &act->sa_mask);
- siginitset(&new_ka.sa.sa_mask, mask);
- }
-
- ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
- if (!ret && oact) {
- if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
- __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
- __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
- return -EFAULT;
- __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
- __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
- }
-
- return ret;
-}
-
-asmlinkage int
-do_sys_sigaltstack(struct pt_regs *regs)
-{
- const stack_t *uss = (stack_t *) regs->dn[0];
- stack_t *uoss = (stack_t *)regs->dn[1];
- return do_sigaltstack(uss, uoss, regs->an[7]);
-}
-
-/*
- * fdpic_func_descriptor describes sa_handler when the application is FDPIC
- */
-struct fdpic_func_descriptor {
- unsigned long text;
- unsigned long GOT;
-};
-
-/*
- * rt_sigframe is stored on the user stack immediately before (above)
- * the signal handlers stack.
- */
-struct rt_sigframe
-{
- unsigned long syscall_number; /* This holds __NR_rt_sigreturn. */
- unsigned long restore_all_regs; /* This field gets set to 1 if the frame
- * type is TRAP or INTERRUPT. */
- siginfo_t *info;
- struct ucontext uc;
- int sig;
- void *pretcode;
-};
-
-/*
- * Do a signal return; undo the signal stack.
- */
-asmlinkage int do_sigreturn(unsigned long __unused)
-{
- BUG();
- return 0;
-}
-
-asmlinkage int do_rt_sigreturn(struct pt_regs *regs)
-{
- unsigned long usp = regs->an[7];
- struct rt_sigframe *frame = (struct rt_sigframe *)(usp);
- sigset_t set;
-
- if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
- goto badframe;
- if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
- goto badframe;
-
- sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- if (copy_from_user(regs, &frame->uc.uc_mcontext, sizeof(struct pt_regs)))
- goto badframe;
- return regs->dn[0];
-
-badframe:
- force_sig(SIGSEGV, current);
- return 0;
-}
-
-static inline void *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
-{
- unsigned long usp;
-
- /* Default to using normal stack. */
- usp = regs->an[7];
-
- /* This is the X/Open sanctioned signal stack switching. */
- if (ka->sa.sa_flags & SA_ONSTACK) {
- if (!sas_ss_flags(usp))
- usp = current->sas_ss_sp + current->sas_ss_size;
- }
- return (void *)((usp - frame_size) & ~0x3);
-}
-
-/*
- * signal_trampoline: Defined in ubicom32_syscall.S
- */
-asmlinkage void signal_trampoline(void)__attribute__((naked));
-
-static void setup_rt_frame (int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs *regs)
-{
- struct rt_sigframe *frame;
- int err = 0;
-
- frame = (struct rt_sigframe *) get_sigframe(ka, regs, sizeof(*frame));
-
- /*
- * The 'err |=' have been may criticized as bad code style, but I
- * strongly suspect that we want this code to be fast. So for
- * now it stays as is.
- */
- err |= __put_user( ( (current_thread_info()->exec_domain)
- && (current_thread_info()->exec_domain->signal_invmap)
- && (sig < 32) )
- ? current_thread_info()->exec_domain->signal_invmap[sig]
- : sig, &frame->sig);
- err |= __put_user(info, &frame->info);
-
- /* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
- err |= __put_user(0, &frame->uc.uc_link);
- err |= __put_user((void *)current->sas_ss_sp,
- &frame->uc.uc_stack.ss_sp);
- err |= __put_user(sas_ss_flags(regs->an[7]),
- &frame->uc.uc_stack.ss_flags);
- err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
- err |= __put_user(__NR_rt_sigreturn, &frame->syscall_number);
- if ((regs->frame_type == UBICOM32_FRAME_TYPE_TRAP) ||
- (regs->frame_type == UBICOM32_FRAME_TYPE_INTERRUPT)) {
- err |= __put_user(1, &frame->restore_all_regs);
- } else {
- err |= __put_user(0, &frame->restore_all_regs);
- }
- err |= copy_to_user (&frame->uc.uc_mcontext.sc_regs, regs, sizeof(struct pt_regs));
- err |= copy_to_user (&frame->uc.uc_sigmask, set, sizeof(*set));
-
- if (err)
- goto give_sigsegv;
-
- /*
- * Set up registers for signal handler NOTE: Do not modify dn[14], it
- * contains the userspace tls pointer, so it important that it carries
- * over to the signal handler.
- */
- regs->an[7] = (unsigned long)frame;
- regs->pc = (unsigned long) signal_trampoline;
- regs->an[5] = (unsigned long) signal_trampoline;
- regs->dn[0] = sig;
- regs->dn[1] = (unsigned long) frame->info;
- regs->dn[2] = (unsigned int) &frame->uc;
-
- /*
- * If this is FDPIC then the signal handler is actually a function
- * descriptor.
- */
- if (current->personality & FDPIC_FUNCPTRS) {
- struct fdpic_func_descriptor __user *funcptr =
- (struct fdpic_func_descriptor *) ka->sa.sa_handler;
- err |= __get_user(regs->dn[3], &funcptr->text);
- err |= __get_user(regs->an[0], &funcptr->GOT);
- if (err)
- goto give_sigsegv;
-
- /*
- * The funcdesc must be in a3 as this is required for the lazy
- * resolver in ld.so, if the application is not FDPIC a3 is not
- * used.
- */
- regs->an[3] = (unsigned long) funcptr;
-
- } else {
- regs->dn[3] = (unsigned long)ka->sa.sa_handler;
- regs->an[0] = 0;
- }
-
- regs->frame_type = UBICOM32_FRAME_TYPE_SIGTRAMP;
-
- return;
-
-give_sigsegv:
- /* user space exception */
- force_sigsegv(sig, current);
-}
-
-static inline void
-handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
-{
- switch (regs->dn[0]) {
- case -ERESTARTNOHAND:
- if (!has_handler)
- goto do_restart;
- regs->dn[0] = -EINTR;
- break;
-
- case -ERESTARTSYS:
- if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
- regs->dn[0] = -EINTR;
- break;
- }
- /* fallthrough */
- case -ERESTARTNOINTR:
- do_restart:
- regs->dn[0] = regs->original_dn_0;
- regs->pc -= 8;
- regs->an[5] -= 8;
- break;
- }
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void
-handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *oldset, struct pt_regs *regs)
-{
- /* are we from a system call? */
- if (regs->frame_type == -1)
- /* If so, check system call restarting.. */
- handle_restart(regs, ka, 1);
-
- /* set up the stack frame */
- setup_rt_frame(sig, ka, info, oldset, regs);
-
- if (ka->sa.sa_flags & SA_ONESHOT)
- ka->sa.sa_handler = SIG_DFL;
-
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
- if (!(ka->sa.sa_flags & SA_NODEFER))
- sigaddset(¤t->blocked,sig);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- */
-asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs)
-{
- struct k_sigaction ka;
- siginfo_t info;
- int signr;
-
- /*
- * We want the common case to go fast, which
- * is why we may in certain cases get here from
- * kernel mode. Just return without doing anything
- * if so.
- */
- if (!user_mode(regs))
- return 1;
-
- if (!oldset)
- oldset = ¤t->blocked;
-
- signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0) {
- /* Whee! Actually deliver the signal. */
- handle_signal(signr, &ka, &info, oldset, regs);
- return 1;
- }
-
- /* Did we come from a system call? */
- if (regs->frame_type == -1) {
- /* Restart the system call - no handlers present */
- handle_restart(regs, NULL, 0);
- }
-
- return 0;
-}
-
-/*
- * sys_sigreturn()
- * Return handler for signal clean-up.
- *
- * NOTE: Ubicom32 does not use this syscall. Instead we rely
- * on do_rt_sigreturn().
- */
-asmlinkage long sys_sigreturn(void)
-{
- return -ENOSYS;
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/smp.c
- * SMP implementation for Ubicom32 processors.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
- * Copyright (C) 1999 David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 2001,2004 Grant Grundler <grundler@parisc-linux.org>
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-
-#include <linux/kernel.h>
-#include <linux/bootmem.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-#include <linux/kernel_stat.h>
-#include <linux/mm.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-#include <linux/cpu.h>
-#include <linux/profile.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/irq.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <asm/current.h>
-#include <asm/tlbflush.h>
-#include <asm/timex.h>
-#include <asm/cpu.h>
-#include <asm/irq.h>
-#include <asm/processor.h>
-#include <asm/thread.h>
-#include <asm/sections.h>
-#include <asm/ip5000.h>
-
-/*
- * Mask the debug printout for IPI because they are too verbose
- * for regular debugging.
- */
-
-// #define DEBUG_SMP 1
-#if !defined(DEBUG_SMP)
-#define smp_debug(lvl, ...)
-#else
-static unsigned int smp_debug_lvl = 50;
-#define smp_debug(lvl, printargs...) \
- if (lvl >= smp_debug_lvl) { \
- printk(printargs); \
- }
-#endif
-
-#if !defined(DEBUG_SMP)
-#define DEBUG_ASSERT(cond)
-#else
-#define DEBUG_ASSERT(cond) \
- if (!(cond)) { \
- THREAD_STALL; \
- }
-#endif
-
-/*
- * List of IPI Commands (more than one can be set at a time).
- */
-enum ipi_message_type {
- IPI_NOP,
- IPI_RESCHEDULE,
- IPI_CALL_FUNC,
- IPI_CALL_FUNC_SINGLE,
- IPI_CPU_STOP,
- IPI_CPU_TIMER,
-};
-
-/*
- * We maintain a hardware thread oriented view of online threads
- * and those involved or needing IPI.
- */
-static volatile unsigned long smp_online_threads = 0;
-static volatile unsigned long smp_needs_ipi = 0;
-static volatile unsigned long smp_inside_ipi = 0;
-static unsigned long smp_irq_affinity[NR_IRQS];
-
-/*
- * What do we need to track on a per cpu/thread basis?
- */
-DEFINE_PER_CPU(struct cpuinfo_ubicom32, cpu_data);
-
-/*
- * Each thread cpuinfo IPI information is guarded by a lock
- * that is kept local to this file.
- */
-DEFINE_PER_CPU(spinlock_t, ipi_lock) = SPIN_LOCK_UNLOCKED;
-
-/*
- * The IPI(s) are based on a software IRQ through the LDSR.
- */
-unsigned int smp_ipi_irq;
-
-/*
- * Define a spinlock so that only one cpu is able to modify the
- * smp_needs_ipi and to set/clear the IRQ at a time.
- */
-DEFINE_SPINLOCK(smp_ipi_lock);
-
-/*
- * smp_halt_processor()
- * Halt this hardware thread.
- */
-static void smp_halt_processor(void)
-{
- int cpuid = thread_get_self();
- cpu_clear(smp_processor_id(), cpu_online_map);
- local_irq_disable();
- printk(KERN_EMERG "cpu[%d] has halted. It is not OK to turn off power \
- until all cpu's are off.\n", cpuid);
- for (;;) {
- thread_suspend();
- }
-}
-
-/*
- * ipi_interrupt()
- * Handle an Interprocessor Interrupt.
- */
-static irqreturn_t ipi_interrupt(int irq, void *dev_id)
-{
- int cpuid = smp_processor_id();
- struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpuid);
- unsigned long ops;
-
- /*
- * Count this now; we may make a call that never returns.
- */
- p->ipi_count++;
-
- /*
- * We are about to process all ops. If another cpu has stated
- * that we need an IPI, we will have already processed it. By
- * clearing our smp_needs_ipi, and processing all ops,
- * we reduce the number of IPI interrupts. However, this introduces
- * the possibility that smp_needs_ipi will be clear and the soft irq
- * will have gone off; so we need to make the get_affinity() path
- * tolerant of spurious interrupts.
- */
- spin_lock(&smp_ipi_lock);
- smp_needs_ipi &= ~(1 << p->tid);
- spin_unlock(&smp_ipi_lock);
-
- for (;;) {
- /*
- * Read the set of IPI commands we should handle.
- */
- spinlock_t *lock = &per_cpu(ipi_lock, cpuid);
- spin_lock(lock);
- ops = p->ipi_pending;
- p->ipi_pending = 0;
- spin_unlock(lock);
-
- /*
- * If we have no IPI commands to execute, break out.
- */
- if (!ops) {
- break;
- }
-
- /*
- * Execute the set of commands in the ops word, one command
- * at a time in no particular order. Strip of each command
- * as we execute it.
- */
- while (ops) {
- unsigned long which = ffz(~ops);
- ops &= ~(1 << which);
-
- BUG_ON(!irqs_disabled());
- switch (which) {
- case IPI_NOP:
- smp_debug(100, KERN_INFO "cpu[%d]: "
- "IPI_NOP\n", cpuid);
- break;
-
- case IPI_RESCHEDULE:
- /*
- * Reschedule callback. Everything to be
- * done is done by the interrupt return path.
- */
- smp_debug(200, KERN_INFO "cpu[%d]: "
- "IPI_RESCHEDULE\n", cpuid);
- break;
-
- case IPI_CALL_FUNC:
- smp_debug(100, KERN_INFO "cpu[%d]: "
- "IPI_CALL_FUNC\n", cpuid);
- generic_smp_call_function_interrupt();
- break;
-
- case IPI_CALL_FUNC_SINGLE:
- smp_debug(100, KERN_INFO "cpu[%d]: "
- "IPI_CALL_FUNC_SINGLE\n", cpuid);
- generic_smp_call_function_single_interrupt();
- break;
-
- case IPI_CPU_STOP:
- smp_debug(100, KERN_INFO "cpu[%d]: "
- "IPI_CPU_STOP\n", cpuid);
- smp_halt_processor();
- break;
-
-#if !defined(CONFIG_LOCAL_TIMERS)
- case IPI_CPU_TIMER:
- smp_debug(100, KERN_INFO "cpu[%d]: "
- "IPI_CPU_TIMER\n", cpuid);
-#if defined(CONFIG_GENERIC_CLOCKEVENTS)
- local_timer_interrupt();
-#else
- update_process_times(user_mode(get_irq_regs()));
- profile_tick(CPU_PROFILING);
-#endif
-#endif
- break;
-
- default:
- printk(KERN_CRIT "cpu[%d]: "
- "Unknown IPI: %lu\n", cpuid, which);
-
- return IRQ_NONE;
- }
-
- /*
- * Let in any pending interrupts
- */
- BUG_ON(!irqs_disabled());
- local_irq_enable();
- local_irq_disable();
- }
- }
- return IRQ_HANDLED;
-}
-
-/*
- * ipi_send()
- * Send an Interprocessor Interrupt.
- */
-static void ipi_send(int cpu, enum ipi_message_type op)
-{
- struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpu);
- spinlock_t *lock = &per_cpu(ipi_lock, cpu);
- unsigned long flags;
-
- /*
- * We protect the setting of the ipi_pending field and ensure
- * that the ipi delivery mechanism and interrupt are atomically
- * handled.
- */
- spin_lock_irqsave(lock, flags);
- p->ipi_pending |= 1 << op;
- spin_unlock_irqrestore(lock, flags);
-
- spin_lock_irqsave(&smp_ipi_lock, flags);
- smp_needs_ipi |= (1 << p->tid);
- ubicom32_set_interrupt(smp_ipi_irq);
- spin_unlock_irqrestore(&smp_ipi_lock, flags);
- smp_debug(100, KERN_INFO "cpu[%d]: send: %d\n", cpu, op);
-}
-
-/*
- * ipi_send_mask
- * Send an IPI to each cpu in mask.
- */
-static inline void ipi_send_mask(unsigned int op, const struct cpumask mask)
-{
- int cpu;
- for_each_cpu_mask(cpu, mask) {
- ipi_send(cpu, op);
- }
-}
-
-/*
- * ipi_send_allbutself()
- * Send an IPI to all threads but ourselves.
- */
-static inline void ipi_send_allbutself(unsigned int op)
-{
- int self = smp_processor_id();
- struct cpumask result;
- cpumask_copy(&result, &cpu_online_map);
- cpu_clear(self, result);
- ipi_send_mask(op, result);
-}
-
-/*
- * smp_enable_vector()
- */
-static void smp_enable_vector(unsigned int irq)
-{
- ubicom32_clear_interrupt(smp_ipi_irq);
- ldsr_enable_vector(irq);
-}
-
-/*
- * smp_disable_vector()
- * Disable the interrupt by clearing the appropriate bit in the
- * LDSR Mask Register.
- */
-static void smp_disable_vector(unsigned int irq)
-{
- ldsr_disable_vector(irq);
-}
-
-/*
- * smp_mask_vector()
- */
-static void smp_mask_vector(unsigned int irq)
-{
- ldsr_mask_vector(irq);
-}
-
-/*
- * smp_unmask_vector()
- */
-static void smp_unmask_vector(unsigned int irq)
-{
- ldsr_unmask_vector(irq);
-}
-
-/*
- * smp_end_vector()
- * Called once an interrupt is completed (reset the LDSR mask).
- */
-static void smp_end_vector(unsigned int irq)
-{
- struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, smp_processor_id());
- spin_lock(&smp_ipi_lock);
- smp_inside_ipi &= ~(1 << p->tid);
- if (smp_inside_ipi) {
- spin_unlock(&smp_ipi_lock);
- return;
- }
- spin_unlock(&smp_ipi_lock);
- ldsr_unmask_vector(irq);
- smp_debug(100, KERN_INFO "cpu[%d]: unamesk vector\n", smp_processor_id());
-}
-
-/*
- * Special hanlder functions for SMP.
- */
-static struct irq_chip ubicom32_smp_chip = {
- .name = "UbicoIPI",
- .startup = NULL,
- .shutdown = NULL,
- .enable = smp_enable_vector,
- .disable = smp_disable_vector,
- .ack = NULL,
- .mask = smp_mask_vector,
- .unmask = smp_unmask_vector,
- .end = smp_end_vector,
-};
-
-/*
- * smp_reset_ipi()
- * None of these cpu(s) got their IPI, turn it back on.
- *
- * Note: This is called by the LDSR which is not a full
- * Linux cpu. Thus you must use the raw form of locks
- * because lock debugging will not work on the partial
- * cpu nature of the LDSR.
- */
-void smp_reset_ipi(unsigned long mask)
-{
- __raw_spin_lock(&smp_ipi_lock.raw_lock);
- smp_needs_ipi |= mask;
- smp_inside_ipi &= ~mask;
- ubicom32_set_interrupt(smp_ipi_irq);
- __raw_spin_unlock(&smp_ipi_lock.raw_lock);
- smp_debug(100, KERN_INFO "smp: reset IPIs for: 0x%x\n", mask);
-}
-
-/*
- * smp_get_affinity()
- * Choose the thread affinity for this interrupt.
- *
- * Note: This is called by the LDSR which is not a full
- * Linux cpu. Thus you must use the raw form of locks
- * because lock debugging will not work on the partial
- * cpu nature of the LDSR.
- */
-unsigned long smp_get_affinity(unsigned int irq, int *all)
-{
- unsigned long mask = 0;
-
- /*
- * Most IRQ(s) are delivered in a round robin fashion.
- */
- if (irq != smp_ipi_irq) {
- unsigned long result = smp_irq_affinity[irq] & smp_online_threads;
- DEBUG_ASSERT(result);
- *all = 0;
- return result;
- }
-
- /*
- * This is an IPI request. Return all cpu(s) scheduled for an IPI.
- * We also track those cpu(s) that are going to be "receiving" IPI this
- * round. When all CPU(s) have called smp_end_vector(),
- * we will unmask the IPI interrupt.
- */
- __raw_spin_lock(&smp_ipi_lock.raw_lock);
- ubicom32_clear_interrupt(smp_ipi_irq);
- if (smp_needs_ipi) {
- mask = smp_needs_ipi;
- smp_inside_ipi |= smp_needs_ipi;
- smp_needs_ipi = 0;
- }
- __raw_spin_unlock(&smp_ipi_lock.raw_lock);
- *all = 1;
- return mask;
-}
-
-/*
- * smp_set_affinity()
- * Set the affinity for this irq but store the value in tid(s).
- */
-void smp_set_affinity(unsigned int irq, const struct cpumask *dest)
-{
- int cpuid;
- unsigned long *paffinity = &smp_irq_affinity[irq];
-
- /*
- * If none specified, all cpus are allowed.
- */
- if (cpus_empty(*dest)) {
- *paffinity = 0xffffffff;
- return;
- }
-
- /*
- * Make sure to clear the old value before setting up the
- * list.
- */
- *paffinity = 0;
- for_each_cpu_mask(cpuid, *dest) {
- struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpuid);
- *paffinity |= (1 << p->tid);
- }
-}
-
-/*
- * smp_send_stop()
- * Send a stop request to all CPU but this one.
- */
-void smp_send_stop(void)
-{
- ipi_send_allbutself(IPI_CPU_STOP);
-}
-
-/*
- * smp_send_timer_all()
- * Send all cpu(s) but this one, a request to update times.
- */
-void smp_send_timer_all(void)
-{
- ipi_send_allbutself(IPI_CPU_TIMER);
-}
-
-/*
- * smp_timer_broadcast()
- * Use an IPI to broadcast a timer message
- */
-void smp_timer_broadcast(const struct cpumask *mask)
-{
- ipi_send_mask(IPI_CPU_TIMER, *mask);
-}
-
-/*
- * smp_send_reschedule()
- * Send a reschedule request to the specified cpu.
- */
-void smp_send_reschedule(int cpu)
-{
- ipi_send(cpu, IPI_RESCHEDULE);
-}
-
-/*
- * arch_send_call_function_ipi()
- * Cause each cpu in the mask to call the generic function handler.
- */
-void arch_send_call_function_ipi_mask(const struct cpumask *mask)
-{
- int cpu;
- for_each_cpu_mask(cpu, *mask) {
- ipi_send(cpu, IPI_CALL_FUNC);
- }
-}
-
-/*
- * arch_send_call_function_single_ipi()
- * Cause the specified cpu to call the generic function handler.
- */
-void arch_send_call_function_single_ipi(int cpu)
-{
- ipi_send(cpu, IPI_CALL_FUNC_SINGLE);
-}
-
-/*
- * setup_profiling_timer()
- * Dummy function created to keep Oprofile happy in the SMP case.
- */
-int setup_profiling_timer(unsigned int multiplier)
-{
- return 0;
-}
-
-/*
- * smp_mainline_start()
- * Start a slave thread executing a mainline Linux context.
- */
-static void __init smp_mainline_start(void *arg)
-{
- int cpuid = smp_processor_id();
- struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpuid);
-
- BUG_ON(p->tid != thread_get_self());
-
- /*
- * Well, support 2.4 linux scheme as well.
- */
- if (cpu_test_and_set(cpuid, cpu_online_map)) {
- printk(KERN_CRIT "cpu[%d]: already initialized!\n", cpuid);
- smp_halt_processor();
- return;
- }
-
- /*
- * Initialise the idle task for this CPU
- */
- atomic_inc(&init_mm.mm_count);
- current->active_mm = &init_mm;
- if (current->mm) {
- printk(KERN_CRIT "cpu[%d]: idle task already has memory "
- "management\n", cpuid);
- smp_halt_processor();
- return;
- }
-
- /*
- * TODO: X86 does this prior to calling notify, try to understand why?
- */
- preempt_disable();
-
-#if defined(CONFIG_GENERIC_CLOCKEVENTS)
- /*
- * Setup a local timer event so that this cpu will get timer interrupts
- */
- if (local_timer_setup(cpuid) == -1) {
- printk(KERN_CRIT "cpu[%d]: timer alloc failed\n", cpuid);
- smp_halt_processor();
- return;
- }
-#endif
-
- /*
- * Notify those interested that we are up and alive. This must
- * be done before interrupts are enabled. It must also be completed
- * before the bootstrap cpu returns from __cpu_up() (see comment
- * above cpu_set() of the cpu_online_map).
- */
- notify_cpu_starting(cpuid);
-
- /*
- * Indicate that this thread is now online and present. Setting
- * cpu_online_map has the side effect of allowing the bootstrap
- * cpu to continue along; so anything that MUST be done prior to the
- * bootstrap cpu returning from __cpu_up() needs to go above here.
- */
- cpu_set(cpuid, cpu_online_map);
- cpu_set(cpuid, cpu_present_map);
-
- /*
- * Maintain a thread mapping in addition to the cpu mapping.
- */
- smp_online_threads |= (1 << p->tid);
-
- /*
- * Enable interrupts for this thread.
- */
- local_irq_enable();
-
- /*
- * Enter the idle loop and wait for a timer to schedule some work.
- */
- printk(KERN_INFO "cpu[%d]: entering cpu_idle()\n", cpuid);
- cpu_idle();
-
- /* Not Reached */
-}
-
-/*
- * smp_cpus_done()
- * Called once the kernel_init() has brought up all cpu(s).
- */
-void smp_cpus_done(unsigned int cpu_max)
-{
- /* Do Nothing */
-}
-
-/*
- * __cpu_up()
- * Called to startup a sepcific cpu.
- */
-int __cpuinit __cpu_up(unsigned int cpu)
-{
- struct task_struct *idle;
- unsigned int *stack;
- long timeout;
- struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpu);
-
- /*
- * Create an idle task for this CPU.
- */
- idle = fork_idle(cpu);
- if (IS_ERR(idle)) {
- panic("cpu[%d]: fork failed\n", cpu);
- return -ENOSYS;
- }
- task_thread_info(idle)->cpu = cpu;
-
- /*
- * Setup the sw_ksp[] to point to this new task.
- */
- sw_ksp[p->tid] = (unsigned int)idle->stack;
- stack = (unsigned int *)(sw_ksp[p->tid] + PAGE_SIZE - 8);
-
- /*
- * Cause the specified thread to execute our smp_mainline_start
- * function as a TYPE_NORMAL thread.
- */
- printk(KERN_INFO "cpu[%d]: launching mainline Linux thread\n", cpu);
- if (thread_start(p->tid, smp_mainline_start, (void *)NULL, stack,
- THREAD_TYPE_NORMAL) == -1) {
- printk(KERN_WARNING "cpu[%d]: failed thread_start\n", cpu);
- return -ENOSYS;
- }
-
- /*
- * Wait for the thread to start up. The thread will set
- * the online bit when it is running. Our caller execpts the
- * cpu to be online if we return 0.
- */
- for (timeout = 0; timeout < 10000; timeout++) {
- if (cpu_online(cpu)) {
- break;
- }
-
- udelay(100);
- barrier();
- continue;
- }
-
- if (!cpu_online(cpu)) {
- printk(KERN_CRIT "cpu[%d]: failed to live after %ld us\n",
- cpu, timeout * 100);
- return -ENOSYS;
- }
-
- printk(KERN_INFO "cpu[%d]: came alive after %ld us\n",
- cpu, timeout * 100);
- return 0;
-}
-
-/*
- * Data used by setup_irq for the IPI.
- */
-static struct irqaction ipi_irq = {
- .name = "ipi",
- .flags = IRQF_DISABLED | IRQF_PERCPU,
- .handler = ipi_interrupt,
-};
-
-/*
- * smp_prepare_cpus()
- * Mark threads that are available to Linux as possible cpus(s).
- */
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
- int i;
-
- /*
- * We will need a software IRQ to send IPI(s). We will use
- * a single software IRQ for all IPI(s).
- */
- if (irq_soft_alloc(&smp_ipi_irq) < 0) {
- panic("no software IRQ is available\n");
- return;
- }
-
- /*
- * For the IPI interrupt, we want to use our own chip definition.
- * This allows us to define what happens in SMP IPI without affecting
- * the performance of the other interrupts.
- *
- * Next, Register the IPI interrupt function against the soft IRQ.
- */
- set_irq_chip(smp_ipi_irq, &ubicom32_smp_chip);
- setup_irq(smp_ipi_irq, &ipi_irq);
-
- /*
- * We use the device tree node to determine how many
- * free cpus we will have (up to NR_CPUS) and we indicate
- * that those cpus are present.
- *
- * We need to do this very early in the SMP case
- * because the Linux init code uses the cpu_present_map.
- */
- for_each_possible_cpu(i) {
- thread_t tid;
- struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, i);
-
- /*
- * Skip the bootstrap cpu
- */
- if (i == 0) {
- continue;
- }
-
- /*
- * If we have a free thread left in the mask,
- * indicate that the cpu is present.
- */
- tid = thread_alloc();
- if (tid == (thread_t)-1) {
- break;
- }
-
- /*
- * Save the hardware thread id for this cpu.
- */
- p->tid = tid;
- cpu_set(i, cpu_present_map);
- printk(KERN_INFO "cpu[%d]: added to cpu_present_map - tid: %d\n", i, tid);
- }
-}
-
-/*
- * smp_prepare_boot_cpu()
- * Copy the per_cpu data into the appropriate spot for the bootstrap cpu.
- *
- * The code in boot_cpu_init() has already set the boot cpu's
- * state in the possible, present, and online maps.
- */
-void __devinit smp_prepare_boot_cpu(void)
-{
- struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, 0);
-
- smp_online_threads |= (1 << p->tid);
- printk(KERN_INFO "cpu[%d]: bootstrap CPU online - tid: %ld\n",
- current_thread_info()->cpu, p->tid);
-}
-
-/*
- * smp_setup_processor_id()
- * Set the current_thread_info() structure cpu value.
- *
- * We set the value to the true hardware thread value that we are running on.
- * NOTE: this function overrides the weak alias function in main.c
- */
-void __init smp_setup_processor_id(void)
-{
- struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, 0);
- int i;
- for_each_cpu_mask(i, CPU_MASK_ALL)
- set_cpu_possible(i, true);
-
- current_thread_info()->cpu = 0;
- p->tid = thread_get_self();
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/stacktrace.c
- * Ubicom32 architecture stack back trace implementation.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/sched.h>
-#include <linux/stacktrace.h>
-#include <linux/module.h>
-#include <asm/stacktrace.h>
-#include <asm/thread.h>
-#include <asm/ip5000.h>
-
-/*
- * These symbols are filled in by the linker.
- */
-extern unsigned long _stext;
-extern unsigned long _etext;
-
-extern unsigned long __ocm_text_run_begin;
-extern unsigned long __data_begin;
-
-/*
- * stacktrace_iterate()
- * Walk the stack looking for call and calli instructions on an aligned
- * boundary.
- *
- * Trace must point to the top of the current stack frame.
- */
-unsigned long stacktrace_iterate(unsigned long **trace,
- unsigned long stext,
- unsigned long etext,
- unsigned long ocm_stext,
- unsigned long ocm_etext,
- unsigned long sstack,
- unsigned long estack)
-{
- unsigned int thread_trap_en, instruction;
- unsigned long address;
- unsigned int limit = 0;
- unsigned long result = 0;
- unsigned long *sp = *trace;
-
- /*
- * Exclude the current thread from being monitored for traps.
- */
- asm volatile(
- " thread_get_self_mask d15 \n\t"
- /* save current trap status */
- " and.4 %0, MT_TRAP_EN, d15 \n\t"
- " not.4 d15, d15 \n\t"
- /* disable trap */
- " and.4 MT_TRAP_EN, MT_TRAP_EN, d15 \n\t"
- " pipe_flush 0 \n\t"
- : "=r" (thread_trap_en)
- :
- : "d15", "cc"
- );
-
- while (limit++ < 256) {
- /*
- * See if we have a valid stack.
- */
- if (!between((unsigned long)sp, sstack, estack)) {
-#ifdef TRAP_DEBUG_STACK_TRACE
- printk(KERN_EMERG "stack address is out of range - "
- "sp: %x, sstack: %x, estack: %x\n",
- (unsigned int)sp, (unsigned int)sstack,
- (unsigned int)estack);
-#endif
- result = 0;
- *trace = 0;
- break;
- }
-
- /*
- * Get the value off the stack and back up 4 bytes to what
- * should be the address of a call or calli.
- */
- address = (*sp++) - 4;
-
- /*
- * If the address is not within the text segment, skip this
- * value.
- */
- if (!between(address, stext, etext) &&
- !between(address, ocm_stext, ocm_etext)) {
-#ifdef TRAP_DEBUG_STACK_TRACE
- printk(KERN_EMERG "not a text address - "
- "address: %08x, stext: %08x, etext: %08x\n"
- "ocm_stext: %08x, ocm_etext: %08x\n",
- (unsigned int)address,
- (unsigned int)stext,
- (unsigned int)etext,
- (unsigned int)ocm_stext,
- (unsigned int)ocm_etext);
-#endif
- continue;
-
- }
-
- /*
- * If the address is not on an aligned boundary it can not be a
- * return address.
- */
- if (address & 0x3) {
- continue;
- }
-
- /*
- * Read the probable instruction.
- */
- instruction = *(unsigned int *)address;
-
- /*
- * Is this a call instruction?
- */
- if ((instruction & 0xF8000000) == (u32_t)(0x1B << 27)) {
-#ifdef TRAP_DEBUG_STACK_TRACE
- printk(KERN_EMERG "call inst. result: %x, "
- "test: %x\n", (unsigned int)address,
- (unsigned int)instruction);
-#endif
- *trace = sp;
- result = address;
- break;
- }
-
- /*
- * Is this a calli instruction?
- */
- if ((instruction & 0xF8000000) == (u32_t)(0x1E << 27)) {
-#ifdef TRAP_DEBUG_STACK_TRACE
- printk(KERN_EMERG "calli inst. result: %x, "
- "test: %x\n", (unsigned int)address,
- (unsigned int)instruction);
-#endif
- *trace = sp;
- result = address;
- break;
- }
- }
-
- /*
- * Restore the current thread to be monitored for traps.
- */
- if (thread_trap_en) {
- asm volatile(
- " thread_get_self_mask d15 \n\t"
- " or.4 MT_TRAP_EN, MT_TRAP_EN, d15 \n\t"
- :
- :
- : "d15", "cc"
- );
- }
- return result;
-}
-
-#ifdef CONFIG_STACKTRACE
-/*
- * stacktrace_save_entries()
- * Save stack back trace information into the provided trace structure.
- */
-void stacktrace_save_entries(struct task_struct *tsk,
- struct stack_trace *trace,
- unsigned long sp)
-{
- unsigned long code_start = (unsigned long)&_stext;
- unsigned long code_end = (unsigned long)&_etext;
- unsigned long ocm_code_start = (unsigned long)&__ocm_text_run_begin;
- unsigned long ocm_code_end = (unsigned long)&__data_begin;
- unsigned long stack_end = (unsigned long)(tsk->stack + THREAD_SIZE - 8);
- unsigned long stack = (unsigned long)sp;
- unsigned int idx = 0;
- unsigned long *handle;
- int skip = trace->skip;
-
- handle = (unsigned long *)stack;
- while (idx < trace->max_entries) {
- if (skip) {
- skip--;
- continue;
- }
- trace->entries[idx] = stacktrace_iterate(&handle,
- code_start, code_end,
- ocm_code_start, ocm_code_end,
- (unsigned long)stack, stack_end);
- if (trace->entries[idx] == 0) {
- break;
- }
- idx++;
- }
-}
-
-/*
- * save_stack_trace()
- * Save the specified amount of the kernel stack trace information
- * for the current task.
- */
-void save_stack_trace(struct stack_trace *trace)
-{
- unsigned long sp = 0;
- asm volatile (
- " move.4 %0, SP \n\t"
- : "=r" (sp)
- );
- stacktrace_save_entries(current, trace, sp);
-}
-EXPORT_SYMBOL_GPL(save_stack_trace);
-
-/*
- * save_stack_trace_tsk()
- * Save the specified amount of the kernel stack trace information
- * for the specified task.
- *
- * Note: We assume the specified task is not currently running.
- */
-void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
-{
- stacktrace_save_entries(tsk, trace, tsk->thread.sp);
-}
-EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
-#endif /* CONFIG_STACKTRACE */
+++ /dev/null
-/*
- * arch/ubicom32/kernel/sys_ubicom32.c
- * Ubicom32 architecture system call support implementation.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- *
- * This file contains various random system calls that
- * have a non-standard calling sequence on the Linux/ubicom32
- * platform.
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/utsname.h>
-#include <linux/ipc.h>
-#include <linux/fs.h>
-#include <linux/uaccess.h>
-#include <linux/unistd.h>
-
-#include <asm/setup.h>
-#include <asm/traps.h>
-#include <asm/cacheflush.h>
-
-/* common code for old and new mmaps */
-static inline long do_mmap2(
- unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff)
-{
- int error = -EBADF;
- struct file *file = NULL;
-
- flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
- if (!(flags & MAP_ANONYMOUS)) {
- file = fget(fd);
- if (!file)
- goto out;
- }
-
- down_write(¤t->mm->mmap_sem);
- error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
- up_write(¤t->mm->mmap_sem);
-
- if (file)
- fput(file);
-out:
- return error;
-}
-
-asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff)
-{
- return do_mmap2(addr, len, prot, flags, fd, pgoff);
-}
-
-/*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to
- * handle more than 4 system call parameters, so these system calls
- * used a memory block for parameter passing..
- */
-
-struct mmap_arg_struct {
- unsigned long addr;
- unsigned long len;
- unsigned long prot;
- unsigned long flags;
- unsigned long fd;
- unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct *arg)
-{
- struct mmap_arg_struct a;
- int error = -EFAULT;
-
- if (copy_from_user(&a, arg, sizeof(a)))
- goto out;
-
- error = -EINVAL;
- if (a.offset & ~PAGE_MASK)
- goto out;
-
- a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
- error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd,
- a.offset >> PAGE_SHIFT);
-out:
- return error;
-}
-
-struct sel_arg_struct {
- unsigned long n;
- fd_set *inp, *outp, *exp;
- struct timeval *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct *arg)
-{
- struct sel_arg_struct a;
-
- if (copy_from_user(&a, arg, sizeof(a)))
- return -EFAULT;
- /* sys_select() does the appropriate kernel locking */
- return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc(uint call, int first, int second,
- int third, void *ptr, long fifth)
-{
- int version, ret;
-
- version = call >> 16; /* hack for backward compatibility */
- call &= 0xffff;
-
- if (call <= SEMCTL)
- switch (call) {
- case SEMOP:
- return sys_semop(first, (struct sembuf *)ptr, second);
- case SEMGET:
- return sys_semget(first, second, third);
- case SEMCTL: {
- union semun fourth;
- if (!ptr)
- return -EINVAL;
- if (get_user(fourth.__pad, (void **) ptr))
- return -EFAULT;
- return sys_semctl(first, second, third, fourth);
- }
- default:
- return -EINVAL;
- }
- if (call <= MSGCTL)
- switch (call) {
- case MSGSND:
- return sys_msgsnd(first, (struct msgbuf *) ptr,
- second, third);
- case MSGRCV:
- switch (version) {
- case 0: {
- struct ipc_kludge tmp;
- if (!ptr)
- return -EINVAL;
- if (copy_from_user(&tmp,
- (struct ipc_kludge *)ptr,
- sizeof(tmp)))
- return -EFAULT;
- return sys_msgrcv(first, tmp.msgp, second,
- tmp.msgtyp, third);
- }
- default:
- return sys_msgrcv(first,
- (struct msgbuf *) ptr,
- second, fifth, third);
- }
- case MSGGET:
- return sys_msgget((key_t) first, second);
- case MSGCTL:
- return sys_msgctl(first, second,
- (struct msqid_ds *) ptr);
- default:
- return -EINVAL;
- }
- if (call <= SHMCTL)
- switch (call) {
- case SHMAT:
- switch (version) {
- default: {
- ulong raddr;
- ret = do_shmat(first, ptr, second, &raddr);
- if (ret)
- return ret;
- return put_user(raddr, (ulong __user *) third);
- }
- }
- case SHMDT:
- return sys_shmdt(ptr);
- case SHMGET:
- return sys_shmget(first, second, third);
- case SHMCTL:
- return sys_shmctl(first, second, ptr);
- default:
- return -ENOSYS;
- }
-
- return -EINVAL;
-}
-
-/* sys_cacheflush -- flush (part of) the processor cache. */
-asmlinkage int
-sys_cacheflush(unsigned long addr, int scope, int cache, unsigned long len)
-{
- flush_cache_all();
- return 0;
-}
-
-asmlinkage int sys_getpagesize(void)
-{
- return PAGE_SIZE;
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/syscalltable.S
- * <TODO: Replace with short file description>
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-/*
- *
- * Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
- * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, Kenneth Albanowski <kjahds@kjahds.com>,
- * Copyright (C) 2000 Lineo Inc. (www.lineo.com)
- * Copyright (C) 1991, 1992 Linus Torvalds
- */
-
-#include <linux/sys.h>
-#include <linux/linkage.h>
-#include <asm/unistd.h>
-
-.text
-ALIGN
- .global sys_call_table
-sys_call_table:
- .long sys_ni_syscall /* 0 - old "setup()" system call*/
- .long sys_exit
- .long sys_fork
- .long sys_read
- .long sys_write
- .long sys_open /* 5 */
- .long sys_close
- .long sys_waitpid
- .long sys_creat
- .long sys_link
- .long sys_unlink /* 10 */
- .long execve_intercept
- .long sys_chdir
- .long sys_time
- .long sys_mknod
- .long sys_chmod /* 15 */
- .long sys_chown16
- .long sys_ni_syscall /* old break syscall holder */
- .long sys_stat
- .long sys_lseek
- .long sys_getpid /* 20 */
- .long sys_mount
- .long sys_oldumount
- .long sys_setuid16
- .long sys_getuid16
- .long sys_stime /* 25 */
- .long sys_ptrace
- .long sys_alarm
- .long sys_fstat
- .long sys_pause
- .long sys_utime /* 30 */
- .long sys_ni_syscall /* old stty syscall holder */
- .long sys_ni_syscall /* old gtty syscall holder */
- .long sys_access
- .long sys_nice
- .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */
- .long sys_sync
- .long sys_kill
- .long sys_rename
- .long sys_mkdir
- .long sys_rmdir /* 40 */
- .long sys_dup
- .long sys_pipe
- .long sys_times
- .long sys_ni_syscall /* old prof syscall holder */
- .long sys_brk /* 45 */
- .long sys_setgid16
- .long sys_getgid16
- .long sys_signal
- .long sys_geteuid16
- .long sys_getegid16 /* 50 */
- .long sys_acct
- .long sys_umount /* recycled never used phys() */
- .long sys_ni_syscall /* old lock syscall holder */
- .long sys_ioctl
- .long sys_fcntl /* 55 */
- .long sys_ni_syscall /* old mpx syscall holder */
- .long sys_setpgid
- .long sys_ni_syscall /* old ulimit syscall holder */
- .long sys_ni_syscall
- .long sys_umask /* 60 */
- .long sys_chroot
- .long sys_ustat
- .long sys_dup2
- .long sys_getppid
- .long sys_getpgrp /* 65 */
- .long sys_setsid
- .long sys_sigaction
- .long sys_sgetmask
- .long sys_ssetmask
- .long sys_setreuid16 /* 70 */
- .long sys_setregid16
- .long sys_sigsuspend
- .long sys_sigpending
- .long sys_sethostname
- .long sys_setrlimit /* 75 */
- .long sys_old_getrlimit
- .long sys_getrusage
- .long sys_gettimeofday
- .long sys_settimeofday
- .long sys_getgroups16 /* 80 */
- .long sys_setgroups16
- .long old_select
- .long sys_symlink
- .long sys_lstat
- .long sys_readlink /* 85 */
- .long sys_uselib
- .long sys_ni_syscall /* _sys_swapon */
- .long sys_reboot
- .long sys_old_readdir
- .long old_mmap /* 90 */
- .long sys_munmap
- .long sys_truncate
- .long sys_ftruncate
- .long sys_fchmod
- .long sys_fchown16 /* 95 */
- .long sys_getpriority
- .long sys_setpriority
- .long sys_ni_syscall /* old profil syscall holder */
- .long sys_statfs
- .long sys_fstatfs /* 100 */
- .long sys_ni_syscall /* ioperm for i386 */
- .long sys_socketcall
- .long sys_syslog
- .long sys_setitimer
- .long sys_getitimer /* 105 */
- .long sys_newstat
- .long sys_newlstat
- .long sys_newfstat
- .long sys_ni_syscall
- .long sys_ni_syscall /* iopl for i386 */ /* 110 */
- .long sys_vhangup
- .long sys_ni_syscall /* obsolete idle() syscall */
- .long sys_ni_syscall /* vm86old for i386 */
- .long sys_wait4
- .long sys_ni_syscall /* 115 */ /* _sys_swapoff */
- .long sys_sysinfo
- .long sys_ipc
- .long sys_fsync
- .long sys_sigreturn
- .long clone_intercept /* 120 */
- .long sys_setdomainname
- .long sys_newuname
- .long sys_cacheflush /* modify_ldt for i386 */
- .long sys_adjtimex
- .long sys_ni_syscall /* 125 */ /* _sys_mprotect */
- .long sys_sigprocmask
- .long sys_ni_syscall /* old "creat_module" */
- .long sys_init_module
- .long sys_delete_module
- .long sys_ni_syscall /* 130: old "get_kernel_syms" */
- .long sys_quotactl
- .long sys_getpgid
- .long sys_fchdir
- .long sys_bdflush
- .long sys_sysfs /* 135 */
- .long sys_personality
- .long sys_ni_syscall /* for afs_syscall */
- .long sys_setfsuid16
- .long sys_setfsgid16
- .long sys_llseek /* 140 */
- .long sys_getdents
- .long sys_select
- .long sys_flock
- .long sys_ni_syscall /* _sys_msync */
- .long sys_readv /* 145 */
- .long sys_writev
- .long sys_getsid
- .long sys_fdatasync
- .long sys_sysctl
- .long sys_ni_syscall /* 150 */ /* _sys_mlock */
- .long sys_ni_syscall /* _sys_munlock */
- .long sys_ni_syscall /* _sys_mlockall */
- .long sys_ni_syscall /* _sys_munlockall */
- .long sys_sched_setparam
- .long sys_sched_getparam /* 155 */
- .long sys_sched_setscheduler
- .long sys_sched_getscheduler
- .long sys_sched_yield
- .long sys_sched_get_priority_max
- .long sys_sched_get_priority_min /* 160 */
- .long sys_sched_rr_get_interval
- .long sys_nanosleep
- .long sys_ni_syscall /* _sys_mremap */
- .long sys_setresuid16
- .long sys_getresuid16 /* 165 */
- .long sys_getpagesize /* _sys_getpagesize */
- .long sys_ni_syscall /* old "query_module" */
- .long sys_poll
- .long sys_ni_syscall /* _sys_nfsservctl */
- .long sys_setresgid16 /* 170 */
- .long sys_getresgid16
- .long sys_prctl
- .long sys_rt_sigreturn
- .long sys_rt_sigaction
- .long sys_rt_sigprocmask /* 175 */
- .long sys_rt_sigpending
- .long sys_rt_sigtimedwait
- .long sys_rt_sigqueueinfo
- .long sys_rt_sigsuspend
- .long sys_pread64 /* 180 */
- .long sys_pwrite64
- .long sys_lchown16
- .long sys_getcwd
- .long sys_capget
- .long sys_capset /* 185 */
- .long sys_sigaltstack
- .long sys_sendfile
- .long sys_ni_syscall /* streams1 */
- .long sys_ni_syscall /* streams2 */
- .long vfork_intercept /* 190 */
- .long sys_getrlimit
- .long sys_mmap2
- .long sys_truncate64
- .long sys_ftruncate64
- .long sys_stat64 /* 195 */
- .long sys_lstat64
- .long sys_fstat64
- .long sys_chown
- .long sys_getuid
- .long sys_getgid /* 200 */
- .long sys_geteuid
- .long sys_getegid
- .long sys_setreuid
- .long sys_setregid
- .long sys_getgroups /* 205 */
- .long sys_setgroups
- .long sys_fchown
- .long sys_setresuid
- .long sys_getresuid
- .long sys_setresgid /* 210 */
- .long sys_getresgid
- .long sys_lchown
- .long sys_setuid
- .long sys_setgid
- .long sys_setfsuid /* 215 */
- .long sys_setfsgid
- .long sys_pivot_root
- .long sys_ni_syscall
- .long sys_ni_syscall
- .long sys_getdents64 /* 220 */
- .long sys_gettid
- .long sys_tkill
- .long sys_setxattr
- .long sys_lsetxattr
- .long sys_fsetxattr /* 225 */
- .long sys_getxattr
- .long sys_lgetxattr
- .long sys_fgetxattr
- .long sys_listxattr
- .long sys_llistxattr /* 230 */
- .long sys_flistxattr
- .long sys_removexattr
- .long sys_lremovexattr
- .long sys_fremovexattr
- .long sys_futex /* 235 */
- .long sys_sendfile64
- .long sys_ni_syscall /* _sys_mincore */
- .long sys_ni_syscall /* _sys_madvise */
- .long sys_fcntl64
- .long sys_readahead /* 240 */
- .long sys_io_setup
- .long sys_io_destroy
- .long sys_io_getevents
- .long sys_io_submit
- .long sys_io_cancel /* 245 */
- .long sys_fadvise64
- .long sys_exit_group
- .long sys_lookup_dcookie
- .long sys_epoll_create
- .long sys_epoll_ctl /* 250 */
- .long sys_epoll_wait
- .long sys_ni_syscall /* _sys_remap_file_pages */
- .long sys_set_tid_address
- .long sys_timer_create
- .long sys_timer_settime /* 255 */
- .long sys_timer_gettime
- .long sys_timer_getoverrun
- .long sys_timer_delete
- .long sys_clock_settime
- .long sys_clock_gettime /* 260 */
- .long sys_clock_getres
- .long sys_clock_nanosleep
- .long sys_statfs64
- .long sys_fstatfs64
- .long sys_tgkill /* 265 */
- .long sys_utimes
- .long sys_fadvise64_64
- .long sys_mbind
- .long sys_get_mempolicy
- .long sys_set_mempolicy /* 270 */
- .long sys_mq_open
- .long sys_mq_unlink
- .long sys_mq_timedsend
- .long sys_mq_timedreceive
- .long sys_mq_notify /* 275 */
- .long sys_mq_getsetattr
- .long sys_waitid
- .long sys_ni_syscall /* for _sys_vserver */
- .long sys_add_key
- .long sys_request_key /* 280 */
- .long sys_keyctl
- .long sys_ioprio_set
- .long sys_ioprio_get
- .long sys_inotify_init
- .long sys_inotify_add_watch /* 285 */
- .long sys_inotify_rm_watch
- .long sys_migrate_pages
- .long sys_openat
- .long sys_mkdirat
- .long sys_mknodat /* 290 */
- .long sys_fchownat
- .long sys_futimesat
- .long sys_fstatat64
- .long sys_unlinkat
- .long sys_renameat /* 295 */
- .long sys_linkat
- .long sys_symlinkat
- .long sys_readlinkat
- .long sys_fchmodat
- .long sys_faccessat /* 300 */
- .long sys_ni_syscall /* Reserved for pselect6 */
- .long sys_ni_syscall /* Reserved for ppoll */
- .long sys_unshare
- .long sys_set_robust_list
- .long sys_get_robust_list /* 305 */
- .long sys_splice
- .long sys_sync_file_range
- .long sys_tee
- .long sys_vmsplice
- .long sys_move_pages /* 310 */
- .long sys_sched_setaffinity
- .long sys_sched_getaffinity
- .long sys_kexec_load
- .long sys_getcpu
- .long sys_epoll_pwait /* 315 */
- .long sys_utimensat
- .long sys_signalfd
- .long sys_timerfd_create
- .long sys_eventfd
- .long sys_fallocate /* 320 */
- .long sys_timerfd_settime
- .long sys_timerfd_gettime
- .long sys_ni_syscall /* sys_signalfd4 */
- .long sys_ni_syscall /* sys_eventfd2 */
- .long sys_ni_syscall /* sys_epoll_create1 */
- /* 325 */
- .long sys_ni_syscall /* sys_dup3 */
- .long sys_ni_syscall /* sys_pipe2 */
- .long sys_ni_syscall /* sys_inotify_init1 */
- .rept NR_syscalls-(.-sys_call_table)/4
- .long sys_ni_syscall
- .endr
+++ /dev/null
-/*
- * arch/ubicom32/kernel/thread.c
- * Ubicom32 architecture hardware thread support.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/profile.h>
-#include <linux/clocksource.h>
-#include <linux/types.h>
-#include <asm/ip5000.h>
-#include <asm/machdep.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread.h>
-
-/*
- * TODO: At some point change the name here to be thread_ksp
- */
-unsigned int sw_ksp[THREAD_ARCHITECTURAL_MAX];
-
-static unsigned int thread_mask = -1;
-static unsigned int thread_mainline_mask;
-
-/*
- * thread_entry()
- * Returning from the called function will disable the thread.
- *
- * This could be a naked call to allow for hwthreads that do not have stacks.
- * However, with -O0, the code still writes to thex stack, and this was
- * corrupting memory just after the callers stack.
- */
-static void thread_entry(void *arg, thread_exec_fn_t exec)
-{
- /*
- * Call thread function
- */
- exec(arg);
-
- /*
- * Complete => Disable self
- */
- thread_disable(thread_get_self());
-}
-
-/*
- * thread_start()
- * Start the specified function on the specified hardware thread.
- */
-thread_t thread_start(thread_t thread,
- thread_exec_fn_t exec,
- void *arg,
- unsigned int *sp_high,
- thread_type_t type)
-{
- /*
- * Sanity check
- */
- unsigned int enabled, mask, csr;
- asm volatile (
- "move.4 %0, MT_EN\n\t"
- : "=m" (enabled)
- );
-
- mask = 1 << thread;
- if (enabled & mask) {
- printk(KERN_WARNING "request to enable a previously enabled thread\n");
- return (thread_t)-1;
- }
-
- /*
- * Update thread state
- */
- csr = (thread << 15) | (1 << 14);
- asm volatile (
- "setcsr %0 \n\t"
- "setcsr_flush 0 \n\t"
-
- "move.4 A0, #0 \n\t"
- "move.4 A1, #0 \n\t"
- "move.4 A2, #0 \n\t"
- "move.4 A3, #0 \n\t"
- "move.4 A4, #0 \n\t"
- "move.4 A5, #0 \n\t"
- "move.4 A6, #0 \n\t"
- "move.4 SP, %4 \n\t" /* A7 is SP */
-
- "move.4 D0, %3 \n\t"
- "move.4 D1, %2 \n\t"
- "move.4 D2, #0 \n\t"
- "move.4 D3, #0 \n\t"
- "move.4 D4, #0 \n\t"
- "move.4 D5, #0 \n\t"
- "move.4 D6, #0 \n\t"
- "move.4 D7, #0 \n\t"
- "move.4 D8, #0 \n\t"
- "move.4 D9, #0 \n\t"
- "move.4 D10, #0 \n\t"
- "move.4 D11, #0 \n\t"
- "move.4 D12, #0 \n\t"
- "move.4 D13, #0 \n\t"
- "move.4 D14, #0 \n\t"
- "move.4 D15, #0 \n\t"
-
- "move.4 INT_MASK0, #0 \n\t"
- "move.4 INT_MASK1, #0 \n\t"
- "move.4 PC, %1 \n\t"
- "setcsr #0 \n\t"
- "setcsr_flush 0 \n\t"
- :
- : "r" (csr), "r" (thread_entry), "r" (exec),
- "r" (arg), "r" (sp_high)
- );
-
- /*
- * Apply HRT state
- */
- if (type & THREAD_TYPE_HRT) {
- asm volatile (
- "or.4 MT_HRT, MT_HRT, %0\n\t"
- :
- : "d" (mask)
- : "cc"
- );
- } else {
- asm volatile (
- "and.4 MT_HRT, MT_HRT, %0\n\t"
- :
- : "d" (~mask)
- : "cc"
- );
- }
-
- /*
- * Set priority
- */
- asm volatile (
- "or.4 MT_HPRI, MT_HPRI, %0\n\t"
- :
- : "d" (mask)
- : "cc"
- );
-
- /*
- * Enable thread
- */
- asm volatile (
- "move.4 MT_ACTIVE_SET, %0 \n\t"
- :
- : "d" (mask)
- );
- thread_enable_mask(mask);
- return thread;
-}
-
-/*
- * thread_get_mainline()
- * Return a mask of those threads that are Linux mainline threads.
- */
-unsigned int thread_get_mainline(void)
-{
- return thread_mainline_mask;
-}
-
-/*
- * thread_set_mainline()
- * Indicate that the specified thread is a Linux mainline thread.
- */
-void thread_set_mainline(thread_t tid)
-{
- thread_mainline_mask |= (1 << tid);
-}
-
-/*
- * thread_alloc()
- * Allocate an unused hardware thread.
- */
-thread_t thread_alloc(void)
-{
- thread_t tid;
-
- /*
- * If this is the first time we are here get the list of unused
- * threads from the processor device tree node.
- */
- if (thread_mask == -1) {
- thread_mask = processor_threads();
- }
-
- if (!thread_mask) {
- return (thread_t)-1;
- }
-
- tid = ffs(thread_mask);
- if (tid != 0) {
- tid--;
- thread_mask &= ~(1 << tid);
- return tid;
- }
-
- return (thread_t)-1;
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/time.c
- * Initialize the timer list and start the appropriate timers.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 1991, 1992, 1995 Linus Torvalds
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/profile.h>
-#include <linux/smp.h>
-#include <asm/ip5000.h>
-#include <asm/machdep.h>
-
-/*
- * A bitmap of the timers on the processor indicates
- * that the timer is free or in-use.
- */
-static unsigned int timers;
-
-/*
- * timer_set()
- * Init the specified compare register to go off <n> cycles from now.
- */
-void timer_set(int timervector, unsigned int cycles)
-{
- int idx = UBICOM32_VECTOR_TO_TIMER_INDEX(timervector);
- UBICOM32_IO_TIMER->syscom[idx] =
- UBICOM32_IO_TIMER->sysval + cycles;
- ldsr_enable_vector(timervector);
-}
-
-/*
- * timer_reset()
- * Set/reset the timer to go off again.
- *
- * Because sysval is a continuous timer, this function is able
- * to ensure that we do not have clock sku by using the previous
- * value in syscom to set the next value for syscom.
- *
- * Returns the number of ticks that transpired since the last event.
- */
-int timer_reset(int timervector, unsigned int cycles)
-{
- /*
- * Reset the timer in the LDSR thread to go off appropriately.
- *
- * Use the previous value of the timer to calculate the new stop
- * time. This allows us to account for it taking an
- * indeterminate amount of time to get here.
- */
- const int timer_index = UBICOM32_VECTOR_TO_TIMER_INDEX(timervector);
- unsigned int prev = UBICOM32_IO_TIMER->syscom[timer_index];
- unsigned int next = prev + cycles;
- int scratchpad3;
- int diff;
- int ticks = 1;
-
- /*
- * If the difference is negative, we have missed at least one
- * timer tick.
- *
- * TODO: Decide if we want to "ignore" time (as done below) or
- * if we want to process time (unevenly) by calling timer_tick()
- * lost_ticks times.
- */
- while (1) {
- /*
- * Set our future time first.
- */
- UBICOM32_IO_TIMER->syscom[timer_index] = next;
-
- /*
- * Then check if we are really set time in the futrue.
- */
- diff = (int)next - (int)UBICOM32_IO_TIMER->sysval;
- if (diff >= 0) {
- break;
- }
-
- /*
- * Oops, we are too slow. Playing catch up.
- *
- * If the debugger is connected the there is a good
- * chance that we lost time because we were in a
- * break-point, so in this case we do not print out
- * diagnostics.
- */
- asm volatile ("move.4 %0, scratchpad3"
- : "=r" (scratchpad3));
- if ((scratchpad3 & 0x1) == 0) {
- /*
- * No debugger attached, print to the console
- */
- printk(KERN_EMERG "diff: %d, timer has lost %u "
- "ticks [rounded up]\n",
- -diff,
- (unsigned int)((-diff + cycles - 1) / cycles));
- }
-
- do {
- next += cycles;
- diff = (int)next - (int)UBICOM32_IO_TIMER->sysval;
- ticks++;
- } while (diff < 0);
- }
- return ticks;
-}
-
-/*
- * sched_clock()
- * Returns current time in nano-second units.
- *
- * Notes:
- * 1) This is an override for the weak alias in
- * kernel/sched_clock.c.
- * 2) Do not use xtime_lock as this function is
- * sometimes called with xtime_lock held.
- * 3) We use a retry algorithm to ensure that
- * we get a consistent value.
- * 4) sched_clock must be overwritten if IRQ tracing
- * is enabled because the default implementation uses
- * the xtime_lock sequence while holding xtime_lock.
- */
-unsigned long long sched_clock(void)
-{
- unsigned long long my_jiffies;
- unsigned long jiffies_top;
- unsigned long jiffies_bottom;
-
- do {
- jiffies_top = jiffies_64 >> 32;
- jiffies_bottom = jiffies_64 & 0xffffffff;
- } while (unlikely(jiffies_top != (unsigned long)(jiffies_64 >> 32)));
-
- my_jiffies = ((unsigned long long)jiffies_top << 32) | (jiffies_bottom);
- return (my_jiffies - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ);
-}
-
-/*
- * timer_free()
- * Free a hardware timer.
- */
-void timer_free(int interrupt)
-{
- unsigned int bit = interrupt - TIMER_INT(0);
-
- /*
- * The timer had not been allocated.
- */
- BUG_ON(timers & (1 << bit));
- timers |= (1 << bit);
-}
-
-/*
- * timer_alloc()
- * Allocate a hardware timer.
- */
-int timer_alloc(void)
-{
- unsigned int bit = find_first_bit((unsigned long *)&timers, 32);
- if (!bit) {
- printk(KERN_WARNING "no more free timers\n");
- return -1;
- }
-
- timers &= ~(1 << bit);
- return bit + TIMER_INT(0);
-}
-
-/*
- * time_init()
- * Time init function.
- */
-void time_init(void)
-{
- /*
- * Find the processor node and determine what timers are
- * available for us.
- */
- timers = processor_timers();
- if (timers == 0) {
- printk(KERN_WARNING "no timers are available for Linux\n");
- return;
- }
-
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
- timer_device_init();
-#else
- timer_tick_init();
-#endif
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/timer_broadcast.c
- * Implements a dummy clock event for each cpu.
- *
- * Copyright (C) 2008 Paul Mundt
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- * arch/arm
- * arch/sh
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/smp.h>
-#include <linux/jiffies.h>
-#include <linux/percpu.h>
-#include <linux/clockchips.h>
-#include <linux/irq.h>
-
-static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
-
-/*
- * The broadcast trick only works when the timer will be used in a periodic mode.
- * If the user has configured either NO_HZ or HIGH_RES_TIMERS they must have
- * a per cpu timer.
- */
-#if defined(CONFIG_NO_HZ) || defined(CONFIG_HIGH_RES_TIMERS)
-#error "Tickless and High Resolution Timers require per-CPU local timers: CONFIG_LOCAL_TIMERS"
-#endif
-
-/*
- * local_timer_interrupt()
- * Used on SMP for local timer interrupt sent via an IPI.
- */
-void local_timer_interrupt(void)
-{
- struct clock_event_device *dev = &__get_cpu_var(local_clockevent);
-
- dev->event_handler(dev);
-}
-
-/*
- * dummy_timer_set_next_event()
- * Cause the timer to go off "cycles" from now.
- */
-static int dummy_timer_set_next_event(unsigned long cycles, struct clock_event_device *dev)
-{
- return 0;
-}
-
-/*
- * dummy_timer_set_mode()
- * Do Nothing.
- */
-static void dummy_timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *clk)
-{
-}
-
-/*
- * local_timer_setup()
- * Adds a clock event for the specified cpu.
- */
-int __cpuinit local_timer_setup(unsigned int cpu)
-{
- struct clock_event_device *dev = &per_cpu(local_clockevent, cpu);
-
- dev->name = "timer-dummy";
- dev->features = CLOCK_EVT_FEAT_DUMMY;
- dev->rating = 200;
- dev->mult = 1;
- dev->set_mode = dummy_timer_set_mode;
- dev->set_next_event = dummy_timer_set_next_event;
- dev->broadcast = smp_timer_broadcast;
- dev->cpumask = cpumask_of_cpu(cpu);
- dev->irq = -1;
- printk(KERN_NOTICE "timer[%d]: %s - created\n", dev->irq, dev->name);
-
- clockevents_register_device(dev);
- return 0;
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/timer_device.c
- * Implements a Ubicom32 clock device and event devices.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/types.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/spinlock.h>
-#include <asm/ip5000.h>
-#include <asm/machdep.h>
-
-#if defined(CONFIG_SMP)
-#include <asm/smp.h>
-#endif
-
-#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
-#define MAX_TIMERS (2 + CONFIG_TIMER_EXTRA_ALLOC)
-#else
-#define MAX_TIMERS (NR_CPUS + CONFIG_TIMER_EXTRA_ALLOC)
-#endif
-
-#if (MAX_TIMERS > 10)
-#error "Ubicom32 only has 10 timers"
-#endif
-
-static unsigned int frequency;
-static struct clock_event_device timer_device_devs[MAX_TIMERS];
-static struct irqaction timer_device_irqs[MAX_TIMERS];
-static int timer_device_next_timer = 0;
-
-DEFINE_SPINLOCK(timer_device_lock);
-
-/*
- * timer_device_set_next_event()
- * Cause the timer to go off "cycles" from now.
- */
-static int timer_device_set_next_event(unsigned long cycles, struct clock_event_device *dev)
-{
- timer_set(dev->irq, cycles);
- return 0;
-}
-
-/*
- * timer_device_set_mode()
- * Handle the mode switch for a clock event device.
- */
-static void timer_device_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
-{
- switch (mode) {
- case CLOCK_EVT_MODE_SHUTDOWN:
- /*
- * Make sure the vector is disabled
- * until the next event is set.
- */
- printk(KERN_NOTICE "timer[%d]: shutdown\n", dev->irq);
- ldsr_disable_vector(dev->irq);
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- /*
- * Make sure the vector is disabled
- * until the next event is set.
- */
- printk(KERN_NOTICE "timer[%d]: oneshot\n", dev->irq);
- ldsr_disable_vector(dev->irq);
- break;
-
- case CLOCK_EVT_MODE_PERIODIC:
- /*
- * The periodic request is 1 per jiffies
- */
- printk(KERN_NOTICE "timer[%d]: periodic: %d cycles\n",
- dev->irq, frequency / CONFIG_HZ);
- timer_set(dev->irq, frequency / CONFIG_HZ);
- break;
-
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_RESUME:
- printk(KERN_WARNING "timer[%d]: unimplemented mode: %d\n",
- dev->irq, mode);
- break;
- };
-}
-
-/*
- * timer_device_event()
- * Call the device's event handler.
- *
- * The pointer is initialized by the generic Linux code
- * to the function to be called.
- */
-static irqreturn_t timer_device_event(int irq, void *dev_id)
-{
- struct clock_event_device *dev = (struct clock_event_device *)dev_id;
-
- if (dev->mode == CLOCK_EVT_MODE_PERIODIC) {
- /*
- * The periodic request is 1 per jiffies
- */
- timer_reset(dev->irq, frequency / CONFIG_HZ);
- } else {
- /*
- * The timer will go off again at the rollover
- * point. We must disable the IRQ to prevent
- * getting a spurious interrupt.
- */
- ldsr_disable_vector(dev->irq);
- }
-
- if (!dev->event_handler) {
- printk(KERN_CRIT "no registered event handler\n");
- return IRQ_HANDLED;
- }
-
- dev->event_handler(dev);
- return IRQ_HANDLED;
-}
-
-/*
- * timer_device_clockbase_read()
- * Provide a primary clocksource around the sysval timer.
- */
-static cycle_t timer_device_clockbase_read(void)
-{
- return (cycle_t)UBICOM32_IO_TIMER->sysval;
-}
-
-/*
- * Primary Clock Source Description
- *
- * We use 24 for the shift factor because we want
- * to ensure there are less than 2^24 clocks
- * in a jiffie of 10 ms.
- */
-static struct clocksource timer_device_clockbase = {
- .name = "sysval",
- .rating = 400,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
- .mask = CLOCKSOURCE_MASK(32),
- .shift = 24,
- .mult = 0,
- .read = timer_device_clockbase_read,
-};
-
-/*
- * timer_device_alloc_event()
- * Allocate a timer device event.
- */
-static int timer_device_alloc_event(const char *name, int cpuid, const struct cpumask *cpumask)
-{
- struct clock_event_device *dev;
- struct irqaction *action;
-
- /*
- * Are we out of configured timers?
- */
- spin_lock(&timer_device_lock);
- if (timer_device_next_timer >= MAX_TIMERS) {
- spin_unlock(&timer_device_lock);
- printk(KERN_WARNING "out of timer event entries\n");
- return -1;
- }
- dev = &timer_device_devs[timer_device_next_timer];
- action = &timer_device_irqs[timer_device_next_timer];
- timer_device_next_timer++;
- spin_unlock(&timer_device_lock);
-
- /*
- * Now allocate a timer to ourselves.
- */
- dev->irq = timer_alloc();
- if (dev->irq == -1) {
- spin_lock(&timer_device_lock);
- timer_device_next_timer--;
- spin_unlock(&timer_device_lock);
- printk(KERN_WARNING "out of hardware timers\n");
- return -1;
- }
-
- /*
- * Init the IRQ action structure. Make sure
- * this in place before you register the clock
- * event device.
- */
- action->name = name;
- action->flags = IRQF_DISABLED | IRQF_TIMER;
- action->handler = timer_device_event;
- //cpumask_copy(&action->mask, mask);
- action->dev_id = dev;
- setup_irq(dev->irq, action);
- irq_set_affinity(dev->irq, cpumask);
- ldsr_disable_vector(dev->irq);
-
- /*
- * init clock dev structure.
- *
- * The min_delta_ns is chosen to ensure that setting next
- * event will never be requested with too small of value.
- */
- dev->name = name;
- dev->rating = timer_device_clockbase.rating;
- dev->shift = timer_device_clockbase.shift;
- dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
- dev->set_mode = timer_device_set_mode;
- dev->set_next_event = timer_device_set_next_event;
- dev->mult = div_sc(frequency, NSEC_PER_SEC, dev->shift);
- dev->max_delta_ns = clockevent_delta2ns(0xffffffff, dev);
- dev->min_delta_ns = clockevent_delta2ns(100, dev);
- //dev->cpumask = mask;
- printk(KERN_NOTICE "timer[%d]: %s - created\n", dev->irq, dev->name);
-
- /*
- * Now register the device.
- */
- clockevents_register_device(dev);
- return dev->irq;
-}
-
-#if defined(CONFIG_LOCAL_TIMERS)
-/*
- * local_timer_setup()
- * Allocation function for creating a per cpu local timer.
- */
-int __cpuinit local_timer_setup(unsigned int cpu)
-{
- return timer_device_alloc_event("timer-cpu", cpu);
-}
-#endif
-
-/*
- * timer_device_init()
- * Create and init a generic clock driver for Ubicom32.
- */
-void timer_device_init(void)
-{
- int i;
-
- /*
- * Get the frequency from the processor device tree node or use
- * the default if not available. We will store this as the frequency
- * of the timer to avoid future calculations.
- */
- frequency = processor_frequency();
- if (frequency == 0) {
- frequency = CLOCK_TICK_RATE;
- }
-
- /*
- * Setup the primary clock source around sysval. Linux does not
- * supply a Mhz multiplier so convert down to khz.
- */
- timer_device_clockbase.mult =
- clocksource_khz2mult(frequency / 1000,
- timer_device_clockbase.shift);
- if (clocksource_register(&timer_device_clockbase)) {
- printk(KERN_ERR "timer: clocksource failed to register\n");
- return;
- }
-
- /*
- * Always allocate a primary timer.
- */
- timer_device_alloc_event("timer-primary", -1, cpu_all_mask);
-
-#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
- /*
- * If BROADCAST is selected we need to add a broadcast timer.
- */
- timer_device_alloc_event("timer-broadcast", -1, cpu_all_mask);
-#endif
-
- /*
- * Allocate extra timers that are requested.
- */
- for (i = 0; i < CONFIG_TIMER_EXTRA_ALLOC; i++) {
- timer_device_alloc_event("timer-extra", -1, cpu_all_mask);
- }
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/timer_tick.c
- * Impelemets a perodic timer.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 1991, 1992, 1995 Linus Torvalds
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/profile.h>
-
-#include <asm/ip5000.h>
-#include <asm/machdep.h>
-#if defined(CONFIG_SMP)
-#include <asm/smp.h>
-#endif
-
-static unsigned int timervector;
-static unsigned int frequency;
-
-/*
- * timer_tick()
- * Kernel system timer support. Needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick.
- */
-static irqreturn_t timer_tick(int irq, void *dummy)
-{
- int ticks;
-
- BUG_ON(!irqs_disabled());
- ticks = timer_reset(timervector, frequency);
-
- write_seqlock(&xtime_lock);
- do_timer(ticks);
- write_sequnlock(&xtime_lock);
-
- update_process_times(user_mode(get_irq_regs()));
- profile_tick(CPU_PROFILING);
-
-#if defined(CONFIG_SMP)
- smp_send_timer_all();
-#endif
- return(IRQ_HANDLED);
-}
-
-/*
- * Data used by setup_irq for the timer.
- */
-static struct irqaction timer_irq = {
- .name = "timer",
- .flags = IRQF_DISABLED | IRQF_TIMER,
- .handler = timer_tick,
-};
-
-/*
- * timer_tick_init()
- * Implements a periodic timer
- *
- * This implementation directly calls the timer_tick() and move
- * the Linux kernel forward. This is used when the user has not
- * selected GENERIC_CLOCKEVENTS.
- */
-void timer_tick_init(void)
-{
- /*
- * Now allocate a timer to ourselves.
- */
- timervector = timer_alloc();
- if (timervector == -1) {
- printk(KERN_WARNING "where did the timer go?\n");
- return;
- }
-
- setup_irq(timervector, &timer_irq);
-
- /*
- * Get the frequency from the processor device tree node or use
- * the default if not available. We will store this as the frequency
- * of the timer to avoid future calculations.
- */
- frequency = processor_frequency();
- if (frequency == 0) {
- frequency = CLOCK_TICK_RATE;
- }
- frequency /= CONFIG_HZ;
-
- printk(KERN_NOTICE "timer will interrupt every: %d cycles\n", frequency);
- timer_set(timervector, frequency);
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/topology.c
- * Ubicom32 architecture sysfs topology information.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/cpu.h>
-#include <linux/cache.h>
-
-static struct cpu cpu_devices[NR_CPUS] __read_mostly;
-
-static int __init topology_init(void)
-{
- int num;
-
- for_each_present_cpu(num) {
- cpu_devices[num].hotpluggable = 0;
- register_cpu(&cpu_devices[num], num);
- }
- return 0;
-}
-
-subsys_initcall(topology_init);
+++ /dev/null
-/*
- * arch/ubicom32/kernel/traps.c
- * Ubicom32 architecture trap handling support.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-/*
- * Sets up all exception vectors
- */
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/a.out.h>
-#include <linux/user.h>
-#include <linux/string.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/kallsyms.h>
-#include <linux/compiler.h>
-#include <linux/stacktrace.h>
-#include <linux/personality.h>
-
-#include <asm/uaccess.h>
-#include <asm/stacktrace.h>
-#include <asm/devtree.h>
-#include <asm/setup.h>
-#include <asm/fpu.h>
-#include <asm/system.h>
-#include <asm/traps.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/machdep.h>
-#include <asm/siginfo.h>
-#include <asm/ip5000.h>
-#include <asm/thread.h>
-
-#define TRAP_MAX_STACK_DEPTH 20
-
-/*
- * These symbols are filled in by the linker.
- */
-extern unsigned long _stext;
-extern unsigned long _etext;
-
-extern unsigned long __ocm_text_run_begin;
-extern unsigned long __data_begin;
-
-extern void show_vmas(struct task_struct *task);
-
-const char *trap_cause_strings[] = {
- /*0*/ "inst address decode error",
- /*1*/ "inst sync error",
- /*2*/ "inst illegal",
- /*3*/ "src1 address decode error",
- /*4*/ "dst address decode error",
- /*5*/ "src1 alignment error",
- /*6*/ "dst alignment error",
- /*7*/ "src1 sync error",
- /*8*/ "dst sync error",
- /*9*/ "DCAPT error",
- /*10*/ "inst range error",
- /*11*/ "src1 range error",
- /*12*/ "dst range error",
-};
-
-/*
- * The device tree trap node definition.
- */
-struct trapnode {
- struct devtree_node dn;
- unsigned int intthread;
-};
-
-static struct trapnode *tn;;
-
-/*
- * trap_interrupt_handler()
- * Software Interrupt to ensure that a trap is serviced.
- */
-static irqreturn_t trap_interrupt_handler(int irq, void *dummy)
-{
- /* Do Nothing */
- return IRQ_HANDLED;
-}
-
-/*
- * Data used by setup_irq for the timer.
- */
-static struct irqaction trap_irq = {
- .name = "trap",
- .flags = IRQF_DISABLED,
- .handler = trap_interrupt_handler,
-};
-
-/*
- * trap_cause_to_str()
- * Convert a trap_cause into a series of printk
- */
-static void trap_cause_to_str(long status)
-{
- int bit;
-
- if ((status & ((1 << TRAP_CAUSE_TOTAL) - 1)) == 0) {
- printk(KERN_NOTICE "decode: UNKNOWN CAUSES\n");
- return;
- }
-
- for (bit = 0; bit < TRAP_CAUSE_TOTAL; bit++) {
- if (status & (1 << bit)) {
- printk(KERN_NOTICE "\tdecode: %08x %s\n",
- 1 << bit, trap_cause_strings[bit]);
- }
- }
-}
-
-/*
- * trap_print_information()
- * Print the cause of the trap and additional info.
- */
-static void trap_print_information(const char *str, struct pt_regs *regs)
-{
- printk(KERN_WARNING "\n");
-
- if (current) {
- printk(KERN_WARNING "Process %s (pid: %d)\n",
- current->comm, current->pid);
- }
-
- if (current && current->mm) {
- printk(KERN_NOTICE "text = 0x%p-0x%p data = 0x%p-0x%p\n"
- KERN_NOTICE "bss = 0x%p-0x%p user-stack = 0x%p\n"
- KERN_NOTICE "\n",
- (void *)current->mm->start_code,
- (void *)current->mm->end_code,
- (void *)current->mm->start_data,
- (void *)current->mm->end_data,
- (void *)current->mm->end_data,
- (void *)current->mm->brk,
- (void *)current->mm->start_stack);
- }
-
- printk(KERN_WARNING "%s: Causes: 0x%08x\n", str,
- (unsigned int)regs->trap_cause);
- trap_cause_to_str(regs->trap_cause);
- show_regs(regs);
- show_stack(NULL, (unsigned long *)regs->an[7]);
- printk(KERN_NOTICE "--- End Trap --- \n");
-}
-
-/*
- * dump_stack()
- * Dump the stack of the current task.
- */
-void dump_stack(void)
-{
- show_stack(NULL, NULL);
-}
-EXPORT_SYMBOL(dump_stack);
-
-/*
- * show_stack()
- * Print out information from the current stack.
- */
-void show_stack(struct task_struct *task, unsigned long *sp)
-{
- /*
- * Allocate just enough entries on the stack.
- */
- unsigned int calls[TRAP_MAX_STACK_DEPTH];
- unsigned long code_start;
- unsigned long code_end;
- unsigned long ocm_code_start = (unsigned long)&__ocm_text_run_begin;
- unsigned long ocm_code_end = (unsigned long)&__data_begin;
- unsigned long stack_end = (unsigned long)(current->stack + THREAD_SIZE - 8);
- unsigned long stack = (unsigned long)sp;
- int kernel_stack = 1;
-
- processor_dram(&code_start, &code_end);
-
- /*
- * Which task are we talking about.
- */
- if (!task) {
- task = current;
- }
-
- /*
- * Find the stack for the task if one was not specified. Otherwise
- * use the specified stack.
- */
- if (!stack) {
- if (task != current) {
- stack = task->thread.sp;
- stack_end = (unsigned long)task->stack + THREAD_SIZE - 8;
- } else {
- asm volatile (
- "move.4 %0, SP \n\t"
- : "=r" (stack)
- );
- }
- }
-
- printk(KERN_NOTICE "Starting backtrace: PID %d '%s'\n",
- task->pid, task->comm);
-
- /*
- * We do 2 passes the first pass is Kernel stack is the second
- * User stack.
- */
- while (kernel_stack) {
- unsigned long *handle;
- unsigned int i, idx = 0;
- struct pt_regs *pt = task_pt_regs(task);
-
- /*
- * If the task is in user mode, reset the start
- * and end values for text.
- */
- if (__user_mode(stack)) {
- if (!(task->personality & FDPIC_FUNCPTRS)) {
- printk(KERN_NOTICE " User Stack:\n");
- code_start = task->mm->start_code;
- code_end = task->mm->end_code;
- } else {
- printk(KERN_NOTICE " User Stack (fdpic):\n");
- show_vmas(task);
- }
- stack_end = task->mm->start_stack;
- ocm_code_end = ocm_code_start = 0;
- kernel_stack = 0;
- } else {
- printk(KERN_NOTICE " Kernel Stack:\n");
- }
-
- /*
- * Collect the stack back trace information.
- */
- printk(" code[0x%lx-0x%lx]", code_start, code_end);
- if (ocm_code_start) {
- printk(" ocm_code[0x%lx-0x%lx]",
- ocm_code_start, ocm_code_end);
- }
- printk("\n stack[0x%lx-0x%lx]\n", stack, stack_end);
-
- handle = (unsigned long*)stack;
- while (idx < TRAP_MAX_STACK_DEPTH) {
- calls[idx] = stacktrace_iterate(&handle,
- code_start, code_end,
- ocm_code_start, ocm_code_end,
- (unsigned long)stack, stack_end);
- if (calls[idx] == 0) {
- break;
- }
- idx++;
- }
-
- /*
- * Now print out the data.
- */
- printk(KERN_NOTICE " CALL && CALLI on stack:");
- for (i = 0; i < idx; i++) {
- printk("%s0x%x, ", (i & 0x3) == 0 ? "\n " : "",
- calls[i]);
- }
- printk(idx == TRAP_MAX_STACK_DEPTH ? "...\n" : "\n");
-
- /*
- * If we are doing user stack we are done
- */
- if (!kernel_stack) {
- break;
- }
-
- /*
- * Does this kernel stack have a mm (i.e. is it user)
- */
- if (!task->mm) {
- printk("No mm for userspace stack.\n");
- break;
- }
- /*
- * Get the user-mode stack (if any)
- */
- stack = pt->an[7];
- printk(KERN_NOTICE "Userspace stack at 0x%lx frame type %d\n",
- stack, (int)pt->frame_type);
- if (!__user_mode(stack)) {
- break;
- }
- }
-}
-
-/*
- * die_if_kernel()
- * Determine if we are in kernel mode and if so print stuff out and die.
- */
-void die_if_kernel(char *str, struct pt_regs *regs, long trap_cause)
-{
- unsigned int s3value;
-
- if (user_mode(regs)) {
- return;
- }
-
- console_verbose();
- trap_print_information(str, regs);
-
- /*
- * If the debugger is attached via the hardware mailbox protocol,
- * go into an infinite loop and the debugger will figure things out.
- */
- asm volatile (
- "move.4 %0, scratchpad3"
- : "=r" (s3value)
- );
- if (s3value) {
- asm volatile("1: jmpt.t 1b");
- }
-
- /*
- * Set the debug taint value.
- */
- add_taint(TAINT_DIE);
- do_exit(SIGSEGV);
-}
-
-/*
- * trap_handler()
- * Handle traps.
- *
- * Traps are treated as interrupts and registered with the LDSR. When
- * the LDSR takes the interrupt, it will determine if a trap has occurred
- * and service the trap prior to servicing the interrupt.
- *
- * This function is directly called by the LDSR.
- */
-void trap_handler(int irq, struct pt_regs *regs)
-{
- int sig = SIGSEGV;
- siginfo_t info;
- unsigned int trap_cause = regs->trap_cause;
-
- BUG_ON(!irqs_disabled());
-
- /*
- * test if in kernel and die.
- */
- die_if_kernel("Kernel Trap", regs, trap_cause);
-
- /*
- * User process problem, setup a signal for this process
- */
- if ((trap_cause & (1 << TRAP_CAUSE_DST_RANGE_ERR)) ||
- (trap_cause & (1 << TRAP_CAUSE_SRC1_RANGE_ERR)) ||
- (trap_cause & (1 << TRAP_CAUSE_I_RANGE_ERR))) {
- sig = SIGSEGV;
- info.si_code = SEGV_MAPERR;
- } else if ((trap_cause & (1 << TRAP_CAUSE_DST_MISALIGNED)) ||
- (trap_cause & (1 << TRAP_CAUSE_SRC1_MISALIGNED))) {
- sig = SIGBUS;
- info.si_code = BUS_ADRALN;
- } else if ((trap_cause & (1 << TRAP_CAUSE_DST_DECODE_ERR)) ||
- (trap_cause & (1 << TRAP_CAUSE_SRC1_DECODE_ERR))) {
- sig = SIGILL;
- info.si_code = ILL_ILLOPN;
- } else if ((trap_cause & (1 << TRAP_CAUSE_ILLEGAL_INST))) {
- /*
- * Check for software break point and if found signal trap
- * not illegal instruction.
- */
- unsigned long instruction;
- if (between(regs->pc, KERNELSTART, memory_end) &&
- (regs->pc & 3) == 0 &&
- get_user(instruction, (unsigned long *)regs->pc) == 0) {
-
- /*
- * This used to be 0xaabbccdd but it turns out
- * that is now valid in ubicom32v4 isa so we
- * have switched to 0xfabbccdd
- */
- if ((instruction == 0xfabbccdd) ||
- (instruction == 0xaabbccdd)) {
- sig = SIGTRAP;
- info.si_code = TRAP_BRKPT;
- goto send_signal;
- }
- }
- sig = SIGILL;
- info.si_code = ILL_ILLOPC;
- } else if ((trap_cause & (1 << TRAP_CAUSE_I_DECODE_ERR))) {
- sig = SIGILL;
- info.si_code = ILL_ILLOPC;
- } else if ((trap_cause & (1 << TRAP_CAUSE_DCAPT))) {
- sig = SIGTRAP;
- info.si_code = TRAP_TRACE;
- }
-
- /*
- * Print a trap information block to the console, do not
- * print this above the case because we don't want it
- * printed for software break points.
- */
- trap_print_information("User Trap", regs);
-
-send_signal:
-
- force_sig_info(sig, &info, current);
-
- /*
- * Interrupts are disabled, re-enable them now.
- */
- if (!irqs_disabled()) {
- printk(KERN_EMERG "interrupts enabled on exit, irq=%d, regs=%p",
- irq, regs);
- BUG();
- }
-}
-
-/*
- * trap_init_interrupt()
- * We need a 2nd trap handling init that will occur after init_IRQ().
- */
-void __init trap_init_interrupt(void)
-{
- int err;
- unsigned char tirq;
- struct devtree_node *dn = (struct devtree_node *)tn;
-
- /*
- * Now setup the Software IRQ so that if a trap occurs the LDSR
- * is started. The irq is there just to "force" the LDSR to run.
- */
- if (!tn) {
- printk(KERN_WARNING "trap_init_interrupt skipped.\n");
- return;
- }
-
- err = devtree_irq(dn, NULL, &tirq);
- if (err) {
- printk(KERN_WARNING "error obtaining trap irq value: %d\n",
- err);
- return;
- }
-
- if (tirq == DEVTREE_IRQ_NONE) {
- printk(KERN_WARNING "trap irq not available: %d\n", tirq);
- return;
- }
-
- err = setup_irq(tirq, &trap_irq);
- if (err) {
- printk(KERN_WARNING "trap irq setup failed: %d\n", err);
- return;
- }
-
- /*
- * Let ultra know which thread is handling the traps and
- * what the interrupt to use is.
- */
- tn->intthread = ldsr_get_threadid();
-
- /*
- * Tell the LDSR about our IRQ so that it will unsuspend
- * if one occurs while waiting for the per thread lock.
- */
- ldsr_set_trap_irq(tirq);
-}
-
-/*
- * trap_init()
- * init trap handling
- *
- * Trap handling is done through the ldsr. Every time an interrupt
- * occurs, the LDSR looks for threads that are listed in the TRAP
- * register and forces a call to the trap handler.
- */
-void __init trap_init(void)
-{
- /*
- * If we do not have a trap node in the device tree, we leave the fault
- * handling to the underlying hardware.
- */
- tn = (struct trapnode *)devtree_find_node("traps");
- if (!tn) {
- printk(KERN_WARNING "traps are not handled by linux\n");
- return;
- }
-}
+++ /dev/null
-/*
- * arch/ubicom32/include/asm/uaccess.c
- * User space memory access functions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/module.h>
-
-#include <asm/segment.h>
-#include <asm/uaccess.h>
-
-extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
-
-/*
- * __access_ok()
- * Check that the address is in the current processes.
- *
- * NOTE: The kernel uses "pretend" user addresses that wind
- * up calling access_ok() so this approach has only marginal
- * value because you wind up with lots of false positives.
- */
-int __access_ok(unsigned long addr, unsigned long size)
-{
- // struct vm_area_struct *vma;
-
- /*
- * Don't do anything if we are not a running system yet.
- */
- if (system_state != SYSTEM_RUNNING) {
- return 1;
- }
-
- /*
- * It appears that Linux will call this function even when we are not
- * in the context of a user space application that has a VM address
- * space. So we must check that current and mm are valid before
- * performing the check.
- */
- if ((!current) || (!current->mm)) {
- return 1;
- }
-
- /*
- * We perform some basic checks on the address to ensure that it
- * is at least within the range of DRAM.
- */
- if ((addr < (int)&_etext) || (addr > memory_end)) {
- printk(KERN_WARNING "pid=%d[%s]: range [%lx - %lx] not in memory area: [%lx - %lx]\n",
- current->pid, current->comm,
- addr, addr + size,
- memory_start, memory_end);
- return 0;
- }
-
- /*
- * For nommu Linux we can check this by looking at the allowed
- * memory map for the process.
- *
- * TODO: Since the kernel passes addresses in it's own space as though
- * they were user address, we can not validate the addresses this way.
- */
-#if 0
- if (!down_read_trylock(¤t->mm->mmap_sem)) {
- return 1;
- }
- vma = find_vma(current->mm, addr);
- if (!vma) {
- up_read(¤t->mm->mmap_sem);
- printk(KERN_WARNING "pid=%d[%s]: possible invalid acesss on range: [%lx - %lx]\n",
- current->pid, current->comm, addr, addr + size);
- return 1;
- }
- if ((addr + size) > vma->vm_end) {
- up_read(¤t->mm->mmap_sem);
- printk(KERN_WARNING "pid=%d[%s]: possible invalid length on range: [%lx - %lx]\n",
- current->pid, current->comm, addr, addr + size);
- return 1;
- }
- up_read(¤t->mm->mmap_sem);
-#endif
- return 1;
-}
-
-EXPORT_SYMBOL(__access_ok);
+++ /dev/null
-/*
- * arch/ubicom32/kernel/ubicom32_context_switch.S
- * Implements context switch and return functions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/sys.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/ubicom32-common.h>
-#include <asm/ip5000.h>
-#include <asm/range-protect.h>
-
-/*
- * begin_restore_context()
- * Restore most of the context from sp (struct pt_reg *)
- *
- * This *can* be called without the global atomic lock. (because sp is
- * not restored!) Only d15 and a3 are allowed to be used after this
- * before calling complete_restore_context
- */
-.macro begin_restore_context
- move.4 d0, PT_D0(sp)
- move.4 d1, PT_D1(sp)
- move.4 d2, PT_D2(sp)
- move.4 d3, PT_D3(sp)
- move.4 d4, PT_D4(sp)
- move.4 d5, PT_D5(sp)
- move.4 d6, PT_D6(sp)
- move.4 d7, PT_D7(sp)
- move.4 d8, PT_D8(sp)
- move.4 d9, PT_D9(sp)
- move.4 d10, PT_D10(sp)
- move.4 d11, PT_D11(sp)
- move.4 d12, PT_D12(sp)
- move.4 d13, PT_D13(sp)
- move.4 d14, PT_D14(sp)
-;; move.4 d15, PT_D15(sp)
- move.4 a0, PT_A0(sp)
- move.4 a1, PT_A1(sp)
- move.4 a2, PT_A2(sp)
-;; move.4 a3, PT_A3(sp)
- move.4 a4, PT_A4(sp)
- move.4 a5, PT_A5(sp)
- move.4 a6, PT_A6(sp)
- move.4 acc0_hi, PT_ACC0HI(sp)
- move.4 acc0_lo, PT_ACC0LO(sp)
- move.4 mac_rc16, PT_MAC_RC16(sp)
- move.4 acc1_hi, PT_ACC1HI(sp)
- move.4 acc1_lo, PT_ACC1LO(sp)
- move.4 source3, PT_SOURCE3(sp)
- move.4 int_mask0, PT_INT_MASK0(sp)
- move.4 int_mask1, PT_INT_MASK1(sp)
-.endm
-
-/*
- * complete_restore_context()
- * Completely restore the context from sp (struct pt_reg *)
- *
- * Note: Recovered PC and CSR are saved on the stack and are to be
- * popped off before returning.
- */
-.macro complete_restore_context
- move.4 a3, sp
- move.4 d15, PT_D15(sp)
- move.4 sp, PT_SP(a3) ; Recover Stack pointer from save area
- move.4 -4(sp)++, PT_PC(a3) ; Recover saved PC and save to stack
- move.4 -4(sp)++, PT_CSR(a3) ; Recover saved csr and save to stack
- move.4 a3, PT_A3(a3)
-.endm
-
-/*
- * old restore_context macro
- */
-.macro restore_context
- begin_restore_context
- complete_restore_context
-.endm
-
-/*
- * ldsr_thread_enable_interrupts()
- * An assembly version of the enable interrupts function.
- *
- * The stack is fair game but all registers MUST be preserved.
- *
- */
-.macro ldsr_thread_enable_interrupts
- move.4 -4(sp)++, d3 ; Push d3
- move.4 -4(sp)++, a3 ; Push a3
-
- /*
- * Read the ROSR and obtain ~(1 << tid)
- */
- lsr.4 d3, rosr, #0x2 ; Move the thread portion of ROSR into d3
- lsl.4 d3, #1, d3 ; perform a (1 << tid)
- not.4 d3, d3 ; Negate the value of d3 == ~(1 << threadid)
-
- /*
- * Get the value of the ldsr_soft_irq_mask
- */
- moveai a3, #%hi(ldsr_soft_irq_mask)
- move.4 a3, %lo(ldsr_soft_irq_mask)(a3)
-
- /*
- * Now re-enable interrupts for this thread and then
- * wakeup the LDSR.
- */
- and.4 scratchpad1, scratchpad1, d3
- move.4 int_set0, a3
-
- /*
- * Restore the registers.
- */
- move.4 a3, (sp)4++
- move.4 d3, (sp)4++
-.endm
-
-/*
- * ret_from_interrupt_to_kernel()
- * RFI function that is where do_IRQ() returns to if the thread was
- * in kernel space.
- */
- .section .text.ret_from_interrupt_to_kernel, "ax", @progbits
- .global ret_from_interrupt_to_kernel
-ret_from_interrupt_to_kernel:
- begin_restore_context ; Restore the thread context
- atomic_lock_acquire ; Enter critical section
- complete_restore_context ; Restore the thread context
- atomic_lock_release ; Leave critical section
- ldsr_thread_enable_interrupts ; enable the threads interrupts
- move.4 csr, (sp)4++ ; Restore csr from the stack
- ret (sp)4++
-
-/*
- * ret_from_interrupt_to_user()
- * RFI function that is where do_IRQ() returns to if the thread was
- * in user space.
- *
- * TODO: Do we really need the critical section handling in this code?
- *
- */
- .section .text.ret_from_interrupt_to_user, "ax", @progbits
- .global ret_from_interrupt_to_user
-ret_from_interrupt_to_user:
- ldsr_thread_enable_interrupts ; enable the threads interrupts
- /*
- * Set a1 to the thread info pointer, no need to save it as we are
- * restoring userspace and will never return
- */
- movei d0, #(~(ASM_THREAD_SIZE-1))
- and.4 a1, sp, d0
-
- /*
- * Test if the scheduler needs to be called.
- */
- btst TI_FLAGS(a1), #ASM_TIF_NEED_RESCHED
- jmpeq.t 2f
- call a5, schedule ; Call the scheduler. I will come back here.
-
- /*
- * See if we have pending signals and call do_signal
- * if needed.
- */
-2:
- btst TI_FLAGS(a1), #ASM_TIF_SIGPENDING ; Any signals needed?
- jmpeq.t 1f
-
- /*
- * Now call do_signal()
- */
- move.4 d0, #0 ; oldset pointer is NULL
- move.4 d1, sp ; d1 is the regs pointer
- call a5, do_signal ; Call do_signal()
-
- /*
- * Back from do_signal(), re-enter critical section.
- */
-1:
- begin_restore_context ; Restore the thread context
- atomic_lock_acquire ; Enter critical section
- call a3, __complete_and_return_to_userspace ; jump to unprotected section
-
-/*
- * restore_all_registers()
- *
- * restore_all_registers will be the alternate exit route for
- * preempted processes that have called a signal handler
- * and are returning back to user space.
- */
- .section .text.restore_all_registers, "ax", @progbits
- .global restore_all_registers
-restore_all_registers:
- begin_restore_context ; Restore the thread context
- atomic_lock_acquire ; Enter critical section
- call a3, __complete_and_return_to_userspace
-
-/*
- * __complete_and_return_to_userspace
- *
- * restores the second half of the context and returns
- * You must have the atomic lock when you call this function
- */
- .section .kernel_unprotected, "ax", @progbits
-__complete_and_return_to_userspace:
- disable_kernel_ranges_for_current d15 ; disable kernel ranges
- complete_restore_context ; restore previous context
- atomic_lock_release ; Leave critical section
- move.4 csr, (sp)4++ ; Restore csr from the stack
- ret (sp)4++
-
-/*
- * ret_from_fork()
- * Called on the child's return from fork system call.
- */
- .section .text.ret_from_fork, "ax", @progbits
- .global ret_from_fork
-ret_from_fork:
- ;;; d0 contains the arg for schedule_tail
- ;;; the others we don't care about as they are in PT_REGS (sp)
- call a5, schedule_tail
-
- atomic_lock_acquire ; Enter critical section
-
- move.4 a3, sp
- move.4 d0, PT_D0(a3) ; Restore D0
- move.4 d1, PT_D1(a3) ; Restore D1
- move.4 d2, PT_D2(a3) ; Restore D2
- move.4 d3, PT_D3(a3) ; Restore D3
- move.4 d10, PT_D10(a3) ; Restore D10
- move.4 d11, PT_D11(a3) ; Restore D11
- move.4 d12, PT_D12(a3) ; Restore D12
- move.4 d13, PT_D13(a3) ; Restore D13
- move.4 a1, PT_A1(a3) ; Restore A1
- move.4 a2, PT_A2(a3) ; Restore A2
- move.4 a5, PT_A5(a3) ; Restore A5
- move.4 a6, PT_A6(a3) ; Restore A6
- ;; I think atomic_lock_acquire could be moved here..
- move.4 sp, PT_SP(a3) ; Restore sp
- move.4 a4, PT_PC(a3) ; Restore pc in register a4
- move.4 PT_FRAME_TYPE(a3), #0 ; Clear frame_type to indicate it is invalid.
-
-#ifdef CONFIG_PROTECT_KERNEL
- call a3, __ret_from_fork_bottom_half
- .section .kernel_unprotected, "ax", @progbits
-__ret_from_fork_bottom_half:
- disable_kernel_ranges_for_current d15
-#endif
- atomic_lock_release ; Leave critical section
- calli a4, 0(a4) ; Return.
-
-/*
- * __switch_to()
- *
- * Call with:
- * void *__switch_to(struct task_struct *prev, struct thread_struct *prev_switch,
- * struct thread_struct *next_switch)
- */
- .section .text.__switch_to, "ax", @progbits
- .global __switch_to
-__switch_to:
-
- /*
- * Set up register a3 to point to save area.
- */
- movea a3, d1 ; a3 now holds prev_switch
- move.4 (a3)4++, d10
- move.4 (a3)4++, d11
- move.4 (a3)4++, d12
- move.4 (a3)4++, d13
- move.4 (a3)4++, a1
- move.4 (a3)4++, a2
- move.4 (a3)4++, a5
- move.4 (a3)4++, a6
- move.4 (a3)4++, a7
-
- /*
- * Set up register a3 to point to restore area.
- */
- movea a3, d2 ; a3 now holds next_switch
- move.4 d10 , (a3)4++
- move.4 d11 , (a3)4++
- move.4 d12 , (a3)4++
- move.4 d13 , (a3)4++
- move.4 a1 , (a3)4++
- move.4 a2 , (a3)4++
- move.4 a5 , (a3)4++
- move.4 a6 , (a3)4++
- move.4 a7 , (a3)4++
-
- /*
- * Load the sw_ksp with the proper thread_info pointer.
- */
- movei d15, #(~(ASM_THREAD_SIZE-1))
- and.4 a3, sp, d15 ; a3 now has the thread info pointer
- moveai a4, #%hi(sw_ksp)
- lea.1 a4, %lo(sw_ksp)(a4) ; a4 now has the base address of sw_ksp array
- lsr.4 d15, ROSR, #2 ; Thread number - bit's 6 through 31 are zeroes anyway.
- move.4 (a4, d15), a3 ; Load the thread info pointer into the hw_ksp array..
-
- /*
- * We are done with context switch. Time to return..
- */
- calli a5, 0(a5)
- .size __switch_to, . - __switch_to
-
-/*
- * ubicom32_emulate_insn()
- * Emulates the instruction.
- *
- * Call with:
- * unsigned int ubicom32_emulate_insn(int source1, int source2, int source3, int *save_acc, int *save_csr);
- */
- .section .text.ubicom32_emulate_insn, "ax", @progbits
- .global ubicom32_emulate_insn
- .global trap_emulate
-ubicom32_emulate_insn:
- movea a3, d3 ; a3 holds save_acc pointer
- movea a4, d4 ; a4 hods save_csr pointer
- move.4 source3, d2
- move.4 acc0_lo, (a3)
- move.4 acc0_hi, 4(a3)
- move.4 acc1_lo, 8(a3)
- move.4 acc1_hi, 12(a3)
- move.4 mac_rc16, 16(a3)
- move.4 CSR, (a4)
- setcsr_flush 0
-
-trap_emulate:
- move.4 d0, d1
- setcsr_flush 0
- move.4 (a4), CSR ; Save csr
- move.4 (a3), acc0_lo
- move.4 4(a3), acc0_hi
- move.4 8(a3), acc1_lo
- move.4 12(a3), acc1_hi
- move.4 16(a3), mac_rc16
- ret a5
- .size ubicom32_emulate_insn, . - ubicom32_emulate_insn
+++ /dev/null
-/*
- * arch/ubicom32/kernel/ubicom32_ksyms.c
- * Ubicom32 architecture compiler support and misc symbols.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/module.h>
-#include <linux/linkage.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/user.h>
-#include <linux/elfcore.h>
-#include <linux/in6.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/semaphore.h>
-
-#include <asm/setup.h>
-#include <asm/machdep.h>
-#include <asm/pgalloc.h>
-#include <asm/irq.h>
-#include <asm/checksum.h>
-#include <asm/current.h>
-
-/* platform dependent support */
-
-EXPORT_SYMBOL(__ioremap);
-EXPORT_SYMBOL(iounmap);
-
-EXPORT_SYMBOL(ip_fast_csum);
-
-
-/* Networking helper routines. */
-EXPORT_SYMBOL(csum_partial_copy_nocheck);
-
-/* The following are special because they're not called
- explicitly (the C compiler generates them). Fortunately,
- their interface isn't gonna change any time soon now, so
- it's OK to leave it out of version control. */
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memmove);
-
-#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 4) || __GNUC__ > 4
-/*
- * libgcc functions - functions that are used internally by the
- * compiler... (prototypes are not correct though, but that
- * doesn't really matter since they're not versioned).
- */
-extern void __ashldi3(void);
-extern void __ashrdi3(void);
-extern void __divsi3(void);
-extern void __divdi3(void);
-extern void __lshrdi3(void);
-extern void __modsi3(void);
-extern void __muldi3(void);
-extern void __udivsi3(void);
-extern void __umodsi3(void);
-
-/* gcc lib functions */
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__divsi3);
-EXPORT_SYMBOL(__divdi3);
-EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(__modsi3);
-EXPORT_SYMBOL(__muldi3);
-EXPORT_SYMBOL(__udivsi3);
-EXPORT_SYMBOL(__umodsi3);
-#else
-extern void __libgcc_udivmodsi(void);
-extern void __libgcc_divmodsi(void);
-
-EXPORT_SYMBOL(__libgcc_udivmodsi);
-EXPORT_SYMBOL(__libgcc_divmodsi);
-#endif
+++ /dev/null
-/*
- * arch/ubicom32/kernel/ubicom32_syscall.S
- * <TODO: Replace with short file description>
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/sys.h>
-#include <linux/linkage.h>
-#include <linux/unistd.h>
-
-#include <asm/ubicom32-common.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-#include <asm/range-protect.h>
-
-/*
- * __old_system_call()
- */
- .section .old_syscall_entry.text, "ax", @progbits
-#ifdef CONFIG_OLD_40400010_SYSTEM_CALL
-__old_system_call:
- call a3, system_call
- .size __old_system_call, . - __old_system_call ;
-#else
- /*
- * something that will crash the userspace application, but
- * should not take down the kernel, if protection is enabled
- * this will never even get executed.
- */
- .long 0xFABBCCDE ; illegal instruction
- bkpt #-1 ; we will never get here
-#endif
-
-/*
- * system_call()
- */
- .section .syscall_entry.text, "ax", @progbits
- .global system_call
-system_call:
- /*
- * Regular ABI rules for function calls apply for syscall. d8 holds
- * the syscall number. We will use that to index into the syscall table.
- * d0 - d5 hold the parameters.
- *
- * First we get the current thread_info and swap to the kernel stack.
- * This is done by reading the current thread and looking up the ksp
- * from the sw_ksp array and storing it in a3.
- *
- * Then we reserve space for the syscall context a struct pt_regs and
- * save it using a4 initially and later as sp.
- * Once sp is set to the kernel sp we can leave the critical section.
- *
- * For the user case the kernel stack will have the following layout.
- *
- * a3 ksp[0] +-----------------------+
- * | Thread info area |
- * | struct thread_info |
- * +-----------------------+
- * : :
- * | Kernel Stack Area |
- * | |
- * a4 / sp >>> +-----------------------+
- * | Context save area |
- * | struct pt_reg |
- * ksp[THREAD_SIZE-8] +-----------------------+
- * | 8 Byte Buffer Zone |
- * ksp[THREAD_SIZE] +-----------------------+
-
- *
- * For kernel syscalls the layout is as follows.
- *
- * a3 ksp[0] +-----------------------+
- * | Thread info area |
- * | struct thread_info |
- * +-----------------------+
- * : :
- * | Kernel Stack Area |
- * | |
- * a4 / sp >>> +-----------------------+
- * | Context save area |
- * | struct pt_reg |
- * sp at syscall entry +-----------------------+
- * | Callers Kernel Stack |
- * : :
- *
- * Once the context is saved we optionally call syscall_trace and setup
- * the exit routine and jump to the syscall.
- */
-
- /*
- * load the base address for sw_ksp into a3
- * Note.. we cannot access it just yet as protection is still on.
- */
- moveai a3, #%hi(sw_ksp)
- lea.1 a3, %lo(sw_ksp)(a3)
-
- /*
- * Enter critical section .
- *
- * The 'critical' aspects here are the switching the to the ksp and
- * changing the protection registers, these both use per thread
- * information so we need to protect from a context switch. For now this
- * is done using the global atomic lock.
- */
- atomic_lock_acquire
-
- thread_get_self d15 ; Load current thread number
-#ifdef CONFIG_PROTECT_KERNEL
- lsl.4 d9, #1, d15 ; Convert to thread bit
- enable_kernel_ranges d9
-#endif
- /*
- * in order to reduce the size of code in the syscall section we get
- * out of it right now
- */
- call a4, __system_call_bottom_half
- .size system_call, . - system_call
-
- .section .text.__system_call_bottom_half, "ax", @progbits
-__system_call_bottom_half:
-
- /*
- * We need to Determine if this is a kernel syscall or user syscall.
- * Start by loading the pointer for the thread_info structure for the
- * current process in to a3.
- */
- move.4 a3, (a3, d15) ; a3 = sw_ksp[d15]
-
- /*
- * Now if this is a kernel thread the same value can be a acheived by
- * masking off the lower bits on the current stack pointer.
- */
- movei d9, #(~(ASM_THREAD_SIZE-1)) ; load mask
- and.4 d9, sp, d9 ; apply mask
-
- /*
- * d9 now has the masked version of the sp. If this is identical to
- * what is in a3 then don't switch to ksp as we are already in the
- * kernel.
- */
- sub.4 #0, a3, d9
-
- /*
- * if d9 and a3 are not equal. We are usespace and have to shift to
- * ksp.
- */
- jmpne.t 1f
-
- /*
- * Kernel Syscall.
- *
- * The kernel has called this routine. We have to pdec space for pt_regs
- * from sp.
- */
- pdec a4, PT_SIZE(sp) ; a4 = ksp - PT_SIZE
- jmpt.t 2f
-
- /*
- * Userspace Syscall.
- *
- * Add THREAD_SIZE and subtract PT_SIZE to create the proper ksp
- */
-1: movei d15, #(ASM_THREAD_SIZE - 8 - PT_SIZE)
- lea.1 a4, (a3, d15) ; a4 = ksp + d15
-
- /*
- * Replace user stack pointer with kernel stack pointer (a4)
- * Load -1 into frame_type in save area to indicate this is system call
- * frame.
- */
-2: move.4 PT_A7(a4), a7 ; Save old sp/A7 on kernel stack
- move.4 PT_FRAME_TYPE(a4), #-1 ; Set the frame type.
- move.4 sp, a4 ; Change to ksp.
- /*
- * We are now officially back in the kernel!
- */
-
- /*
- * Now that we are on the ksp we can leave the critical section
- */
- atomic_lock_release
-
- /*
- * We need to save a0 because we need to be able to restore it in
- * the event that we need to handle a signal. It's not generally
- * a callee-saved register but is the GOT pointer.
- */
- move.4 PT_A0(sp), a0 ; Save A0 on kernel stack
-
- /*
- * We still need to save d10-d13, a1, a2, a5, a6 in the kernel frame
- * for this process, we also save the system call params in the case of
- * syscall restart. (note a7 was saved above)
- */
- move.4 PT_A1(sp), a1 ; Save A1 on kernel stack
- move.4 PT_A2(sp), a2 ; Save A2 on kernel stack
- move.4 PT_A5(sp), a5 ; Save A5 on kernel stack
- move.4 PT_A6(sp), a6 ; Save A6 on kernel stack
- move.4 PT_PC(sp), a5 ; Save A5 at the PC location
- move.4 PT_D10(sp), d10 ; Save D10 on kernel stack
- move.4 PT_D11(sp), d11 ; Save D11 on kernel stack
- move.4 PT_D12(sp), d12 ; Save D12 on kernel stack
- move.4 PT_D13(sp), d13 ; Save D13 on kernel stack
-
- /*
- * Now save the syscall parameters
- */
- move.4 PT_D0(sp), d0 ; Save d0 on kernel stack
- move.4 PT_ORIGINAL_D0(sp), d0 ; Save d0 on kernel stack
- move.4 PT_D1(sp), d1 ; Save d1 on kernel stack
- move.4 PT_D2(sp), d2 ; Save d2 on kernel stack
- move.4 PT_D3(sp), d3 ; Save d3 on kernel stack
- move.4 PT_D4(sp), d4 ; Save d4 on kernel stack
- move.4 PT_D5(sp), d5 ; Save d5 on kernel stack
- move.4 PT_D8(sp), d8 ; Save d8 on kernel stack
-
- /*
- * Test if syscalls are being traced and if they are jump to syscall
- * trace (it will comeback here)
- */
- btst TI_FLAGS(a3), #ASM_TIF_SYSCALL_TRACE
- jmpne.f .Lsystem_call__trace
-.Lsystem_call__trace_complete:
- /*
- * Check for a valid call number [ 0 <= syscall_number < NR_syscalls ]
- */
- cmpi d8, #0
- jmplt.f 3f
- cmpi d8, #NR_syscalls
- jmplt.t 4f
-
- /*
- * They have passed an invalid number. Call sys_ni_syscall staring by
- * load a4 with the base address of sys_ni_syscall
- */
-3: moveai a4, #%hi(sys_ni_syscall)
- lea.1 a4, %lo(sys_ni_syscall)(a4)
- jmpt.t 5f ; Jump to regular processing
-
- /*
- * Validated syscall, load the syscall table base address into a3 and
- * read the syscall ptr out.
- */
-4: moveai a3, #%hi(sys_call_table)
- lea.1 a3, %lo(sys_call_table)(a3) ; a3 = sys_call_table
- move.4 a4, (a3, d8) ; a4 = sys_call_table[d8]
-
- /*
- * Before calling the syscall, setup a5 so that syscall_exit is called
- * on return from syscall
- */
-5: moveai a5, #%hi(syscall_exit) ; Setup return address
- lea.1 a5, %lo(syscall_exit)(a5) ; from system call
-
- /*
- * If the syscall is __NR_rt_rigreturn then we have to test d1 to
- * figure out if we have to change change the return routine to restore
- * all registers.
- */
- cmpi d8, #__NR_rt_sigreturn
- jmpeq.f 6f
-
- /*
- * Launch system call (it will return through a5 - syscall_exit)
- */
- calli a3, 0(a4)
-
- /*
- * System call is rt_sigreturn. Test d1. If it is 1 we have to
- * change the return address to restore_all_registers
- */
-6: cmpi d1, #1
- jmpne.t 7f
-
- moveai a5, #%hi(restore_all_registers) ; Setup return address
- lea.1 a5, %lo(restore_all_registers)(a5) ; to restore_all_registers.
-
- /*
- * Launch system call (it will return through a5)
- */
-7: calli a3, 0(a4) ; Launch system call
-
-.Lsystem_call__trace:
- /*
- * Syscalls are being traced.
- * Call syscall_trace, (return here)
- */
- call a5, syscall_trace
-
- /*
- * Restore syscall state (it would have been discarded during the
- * syscall trace)
- */
- move.4 d0, PT_D0(sp) ; Restore d0 from kernel stack
- move.4 d1, PT_D1(sp) ; Restore d1 from kernel stack
- move.4 d2, PT_D2(sp) ; Restore d2 from kernel stack
- move.4 d3, PT_D3(sp) ; Restore d3 from kernel stack
- move.4 d4, PT_D4(sp) ; Restore d4 from kernel stack
- move.4 d5, PT_D5(sp) ; Restore d5 from kernel stack
- /* add this back if we ever have a syscall with 7 args */
- move.4 d8, PT_D8(sp) ; Restore d8 from kernel stack
-
- /*
- * return to syscall
- */
- jmpt.t .Lsystem_call__trace_complete
- .size __system_call_bottom_half, . - __system_call_bottom_half
-
-/*
- * syscall_exit()
- */
- .section .text.syscall_exit
- .global syscall_exit
-syscall_exit:
- /*
- * d0 contains the return value. We should move that into the kernel
- * stack d0 location. We will be transitioning from kernel to user
- * mode. Test the flags and see if we have to call schedule. If we are
- * going to truly exit then all that has to be done is that from the
- * kernel stack we have to restore d0, a0, a1, a2, a5, a6 and sp (a7)bb
- * and then return via a5.
- */
-
- /*
- * Save d0 to pt_regs
- */
- move.4 PT_D0(sp), d0 ; Save d0 into the kernel stack
-
- /*
- * load the thread_info structure by masking off the THREAD_SIZE
- * bits.
- *
- * Note: we used to push a1, but now we don't as we are going
- * to eventually restore it to the userspace a1.
- */
- movei d9, #(~(ASM_THREAD_SIZE-1))
- and.4 a1, sp, d9
-
- /*
- * Are any interesting bits set on TI flags, if there are jump
- * aside to post_processing.
- */
- move.4 d9, #(_TIF_SYSCALL_TRACE | _TIF_NEED_RESCHED | _TIF_SIGPENDING)
- and.4 #0, TI_FLAGS(a1), d9
- jmpne.f .Lsyscall_exit__post_processing ; jump to handler
-.Lsyscall_exit__post_processing_complete:
-
- move.4 d0, PT_D0(sp) ; Restore D0 from kernel stack
- move.4 d1, PT_D1(sp) ; Restore d1 from kernel stack
- move.4 d2, PT_D2(sp) ; Restore d2 from kernel stack
- move.4 d3, PT_D3(sp) ; Restore d3 from kernel stack
- move.4 d4, PT_D4(sp) ; Restore d4 from kernel stack
- move.4 d5, PT_D5(sp) ; Restore d5 from kernel stack
- move.4 d8, PT_D8(sp) ; Restore d8 from kernel stack
- move.4 d10, PT_D10(sp) ; Restore d10 from kernel stack
- move.4 d11, PT_D11(sp) ; Restore d11 from kernel stack
- move.4 d12, PT_D12(sp) ; Restore d12 from kernel stack
- move.4 d13, PT_D13(sp) ; Restore d13 from kernel stack
- move.4 a1, PT_A1(sp) ; Restore A1 from kernel stack
- move.4 a2, PT_A2(sp) ; Restore A2 from kernel stack
- move.4 a5, PT_A5(sp) ; Restore A5 from kernel stack
- move.4 a6, PT_A6(sp) ; Restore A6 from kernel stack
- move.4 a0, PT_A0(sp) ; Restore A6 from kernel stack
-
- /*
- * this is only for debug, and could be removed for production builds
- */
- move.4 PT_FRAME_TYPE(sp), #0 ; invalidate frame_type
-
-#ifdef CONFIG_PROTECT_KERNEL
-
- call a4, __syscall_exit_bottom_half
-
- .section .kernel_unprotected, "ax", @progbits
-__syscall_exit_bottom_half:
- /*
- * Enter critical section
- */
- atomic_lock_acquire
- disable_kernel_ranges_for_current d15
-#endif
- /*
- * Lastly restore userspace stack ptr
- *
- * Note: that when protection is on we need to hold the lock around the
- * stack swap as well because otherwise the protection could get
- * inadvertently disabled again at the end of a context switch.
- */
- move.4 a7, PT_A7(sp) ; Restore A7 from kernel stack
-
- /*
- * We are now officially back in userspace!
- */
-
-#ifdef CONFIG_PROTECT_KERNEL
- /*
- * Leave critical section and return to user space.
- */
- atomic_lock_release
-#endif
- calli a5, 0(a5) ; Back to userspace code.
-
- bkpt #-1 ; we will never get here
-
- /*
- * Post syscall processing. (unlikely part of syscall_exit)
- *
- * Are we tracing syscalls. If TIF_SYSCALL_TRACE is set, call
- * syscall_trace routine and return here.
- */
- .section .text.syscall_exit, "ax", @progbits
-.Lsyscall_exit__post_processing:
- btst TI_FLAGS(a1), #ASM_TIF_SYSCALL_TRACE
- jmpeq.t 1f
- call a5, syscall_trace
-
- /*
- * Do we need to resched ie call schedule. If TIF_NEED_RESCHED is set,
- * call the scheduler, it will come back here.
- */
-1: btst TI_FLAGS(a1), #ASM_TIF_NEED_RESCHED
- jmpeq.t 2f
- call a5, schedule
-
- /*
- * Do we need to post a signal, if TIF_SIGPENDING is set call the
- * do_signal.
- */
-2: btst TI_FLAGS(a1), #ASM_TIF_SIGPENDING
- jmpeq.t .Lsyscall_exit__post_processing_complete
-
- /*
- * setup the do signal call
- */
- move.4 d0, #0 ; oldset pointer is NULL
- lea.1 d1, (sp) ; d1 is the regs pointer.
- call a5, do_signal
-
- jmpt.t .Lsyscall_exit__post_processing_complete
-
-/* .size syscall_exit, . - syscall_exit */
-
-/*
- * kernel_execve()
- * kernel_execv is called when we the kernel is starting a
- * userspace application.
- */
- .section .kernel_unprotected, "ax", @progbits
- .global kernel_execve
-kernel_execve:
- move.4 -4(sp)++, a5 ; Save return address
- /*
- * Call execve
- */
- movei d8, #__NR_execve ; call execve
- call a5, system_call
- move.4 a5, (sp)4++
-
- /*
- * protection was enabled again at syscall exit, but we want
- * to return to kernel so we enable it again.
- */
-#ifdef CONFIG_PROTECT_KERNEL
- /*
- * We are entering the kernel so we need to disable the protection.
- * Enter critical section, disable ranges and leave critical section.
- */
- call a3, __enable_kernel_ranges ; and jump back to kernel
-#else
- ret a5 ; jump back to the kernel
-#endif
-
- .size kernel_execve, . - kernel_execve
-
-/*
- * signal_trampoline()
- *
- * Deals with transitioning from to userspace signal handlers and returning
- * to userspace, only called from the kernel.
- *
- */
- .section .kernel_unprotected, "ax", @progbits
- .global signal_trampoline
-signal_trampoline:
- /*
- * signal_trampoline is called when we are jumping from the kernel to
- * the userspace signal handler.
- *
- * The following registers are relevant. (set setup_rt_frame)
- * sp is the user space stack not the kernel stack
- * d0 = signal number
- * d1 = siginfo_t *
- * d2 = ucontext *
- * d3 = the user space signal handler
- * a0 is set to the GOT if userspace application is FDPIC, otherwise 0
- * a3 is set to the FD for the signal if userspace application is FDPIC
- */
-#ifdef CONFIG_PROTECT_KERNEL
- /*
- * We are leaving the kernel so we need to enable the protection.
- * Enter critical section, disable ranges and leave critical section.
- */
- atomic_lock_acquire ; Enter critical section
- disable_kernel_ranges_for_current d15 ; disable kernel ranges
- atomic_lock_release ; Leave critical section
-#endif
- /*
- * The signal handler pointer is in register d3 so tranfer it to a4 and
- * call it
- */
- movea a4, d3 ; signal handler
- calli a5, 0(a4)
-
- /*
- * Return to userspace through rt_syscall which is stored on top of the
- * stack d1 contains ret_via_interrupt status.
- */
- move.4 d8, (sp) ; d8 (syscall #) = rt_syscall
- move.4 d1, 4(sp) ; d1 = ret_via_interrupt
- call a5, system_call ; as we are 'in' the kernel
- ; we can call kernel_syscall
-
- bkpt #-1 ; will never get here.
- .size signal_trampoline, . - signal_trampoline
-
-/*
- * kernel_thread_helper()
- *
- * Entry point for kernel threads (only referenced by kernel_thread()).
- *
- * On execution d0 will be 0, d1 will be the argument to be passed to the
- * kernel function.
- * d2 contains the kernel function that needs to get called.
- * d3 will contain address to do_exit which needs to get moved into a5.
- *
- * On return from fork the child thread d0 will be 0. We call this dummy
- * function which in turn loads the argument
- */
- .section .kernel_unprotected, "ax", @progbits
- .global kernel_thread_helper
-kernel_thread_helper:
- /*
- * Create a kernel thread. This is called from ret_from_vfork (a
- * userspace return routine) so we need to put it in an unprotected
- * section and re-enable protection before calling the vector in d2.
- */
-
-#ifdef CONFIG_PROTECT_KERNEL
- /*
- * We are entering the kernel so we need to disable the protection.
- * Enter critical section, disable ranges and leave critical section.
- */
- call a5, __enable_kernel_ranges
-#endif
- /*
- * Move argument for kernel function into d0, and set a5 return address
- * (a5) to do_exit and return through a2
- */
- move.4 d0, d1 ; d0 = arg
- move.4 a5, d3 ; a5 = do_exit
- ret d2 ; call function ptr in d2
- .size kernel_thread_helper, . - kernel_thread_helper
-
-#ifdef CONFIG_PROTECT_KERNEL
- .section .kernel_unprotected, "ax", @progbits
-__enable_kernel_ranges:
- atomic_lock_acquire ; Enter critical section
- enable_kernel_ranges_for_current d15
- atomic_lock_release ; Leave critical section
- calli a5, 0(a5)
- .size __enable_kernel_ranges, . - __enable_kernel_ranges
-
-#endif
-
-/*
- * The following system call intercept functions where we setup the
- * input to the real system call. In all cases these are just taking
- * the current sp which is pointing to pt_regs and pushing it into the
- * last arg of the system call.
- *
- * i.e. the public definition of sys_execv is
- * sys_execve( char *name,
- * char **argv,
- * char **envp )
- * but process.c defines it as
- * sys_execve( char *name,
- * char **argv,
- * char **envp,
- * struct pt_regs *regs )
- *
- * so execve_intercept needs to populate the 4th arg with pt_regs*,
- * which is the stack pointer as we know we must be coming out of
- * system_call
- *
- * The intercept vectors are referenced by syscalltable.S
- */
-
-/*
- * execve_intercept()
- */
- .section .text.execve_intercept, "ax", @progbits
- .global execve_intercept
-execve_intercept:
- move.4 d3, sp ; Save pt_regs address
- call a3, sys_execve
-
- .size execve_intercept, . - execve_intercept
-
-/*
- * vfork_intercept()
- */
- .section .text.vfork_intercept, "ax", @progbits
- .global vfork_intercept
-vfork_intercept:
- move.4 d0, sp ; Save pt_regs address
- call a3, sys_vfork
-
- .size vfork_intercept, . - vfork_intercept
-
-/*
- * clone_intercept()
- */
- .section .text.clone_intercept, "ax", @progbits
- .global clone_intercept
-clone_intercept:
- move.4 d2, sp ; Save pt_regs address
- call a3, sys_clone
-
- .size clone_intercept, . - clone_intercept
-
-/*
- * sys_sigsuspend()
- */
- .section .text.sigclone_intercept, "ax", @progbits
- .global sys_sigsuspend
-sys_sigsuspend:
- move.4 d0, sp ; Pass pointer to pt_regs in d0
- call a3, do_sigsuspend
-
- .size sys_sigsuspend, . - sys_sigsuspend
-
-/*
- * sys_rt_sigsuspend()
- */
- .section .text.sys_rt_sigsuspend, "ax", @progbits
- .global sys_rt_sigsuspend
-sys_rt_sigsuspend:
- move.4 d0, sp ; Pass pointer to pt_regs in d0
- call a3, do_rt_sigsuspend
-
- .size sys_rt_sigsuspend, . - sys_rt_sigsuspend
-
-/*
- * sys_rt_sigreturn()
- */
- .section .text.sys_rt_sigreturn, "ax", @progbits
- .global sys_rt_sigreturn
-sys_rt_sigreturn:
- move.4 d0, sp ; Pass pointer to pt_regs in d0
- call a3, do_rt_sigreturn
-
- .size sys_rt_sigreturn, . - sys_rt_sigreturn
-
-/*
- * sys_sigaltstack()
- */
- .section .text.sys_sigaltstack, "ax", @progbits
- .global sys_sigaltstack
-sys_sigaltstack:
- move.4 d0, sp ; Pass pointer to pt_regs in d0
- call a3, do_sys_sigaltstack
-
- .size sys_sigaltstack, . - sys_sigaltstack
+++ /dev/null
-/*
- * arch/ubicom32/kernel/unaligned_trap.c
- * Handle unaligned traps in both user or kernel space.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-
-#define FALSE 0
-#define TRUE 1
-
-/* no possible trap */
-#define UNUSED 0
-/* possible source operand trap */
-#define SRC 1
-#define SRC_2 2
-/* possible destination operand trap */
-#define DEST 3
-#define DEST_2 4
-/* can be either source or destination or both */
-#define TWO_OP 5
-#define TWO_OP_2 6
-
-/* TODO: What is the real value here, put something in to make it compile for
- * now */
-#define MOVE_2 0x0d
-#define LSL_2 0x11
-#define LSR_2 0x13
-#define MOVEI 0x19
-#define CMPI 0x18
-
-static int op_format[32] =
-{
- TWO_OP, /* 0x00 */
- UNUSED,
- SRC,
- UNUSED,
- TWO_OP, /* 0x04 */
- TWO_OP,
- SRC,
- UNUSED,
- TWO_OP_2, /* 0x08 */
- TWO_OP,
- TWO_OP_2,
- TWO_OP,
- TWO_OP_2, /* 0x0C */
- TWO_OP,
- TWO_OP_2,
- TWO_OP,
- TWO_OP, /* 0x10 */
- TWO_OP_2,
- TWO_OP,
- TWO_OP,
- UNUSED, /* 0x14 */
- UNUSED,
- UNUSED,
- UNUSED,
- SRC_2, /* 0x18 */
- DEST_2,
- UNUSED,
- UNUSED,
- UNUSED, /* 0x1C */
- UNUSED,
- UNUSED, /* unaligned CALLI will not be fixed. */
- UNUSED
-};
-
-static int op_0_format[32] =
-{
- UNUSED, /* 0x00 */
- UNUSED,
- UNUSED,
- UNUSED,
- UNUSED, /* 0x04 - ret don't fix - bad ret is always wrong */
- UNUSED,
- UNUSED,
- UNUSED,
- UNUSED, /* 0x08 */
- UNUSED,
- TWO_OP,
- TWO_OP_2,
- TWO_OP, /* 0x0c */
- TWO_OP_2,
- TWO_OP,
- UNUSED, /* .1 can't trap */
- UNUSED, /* 0x10 */
- UNUSED,
- SRC,
- UNUSED,
- UNUSED, /* 0x14 */
- TWO_OP_2,
- UNUSED,
- UNUSED,
- UNUSED, /* 0x18 */
- UNUSED,
- UNUSED,
- UNUSED,
- DEST, /* 0x1c */
- DEST,
- DEST,
- DEST, /* all lea have 32-bit destination */
-};
-
-static int op_2_format[32] =
-{
- UNUSED, /* 0x00 */
- UNUSED,
- UNUSED,
- UNUSED,
- UNUSED, /* 0x04 */
- UNUSED,
- SRC,
- UNUSED,
- UNUSED, /* 0x08 crcgen is .1 */
- UNUSED,
- UNUSED,
- UNUSED,
- UNUSED, /* 0x0c */
- UNUSED,
- UNUSED,
- UNUSED,
- SRC, /* 0x10 */
- SRC_2,
- SRC,
- SRC_2,
- SRC, /* 0x14 */
- SRC_2,
- SRC,
- UNUSED,
- UNUSED, /* 0x18 */
- UNUSED,
- SRC,
- UNUSED,
- SRC, /* 0x1c */
- UNUSED,
- SRC_2,
- UNUSED,
-};
-
-static int op_6_format[32] =
-{
- SRC_2, /* 0x00 */
- SRC_2,
- SRC_2,
- SRC_2,
- SRC_2, /* 0x04 */
- SRC_2,
- UNUSED,
- SRC_2,
- SRC, /* 0x08 MULS.4 */
- SRC_2,
- SRC,
- UNUSED,
- UNUSED, /* 0x0c */
- UNUSED,
- UNUSED,
- UNUSED,
- SRC, /* 0x10 */
- SRC_2,
- SRC,
- SRC_2,
- UNUSED, /* 0x14 */
- UNUSED,
- UNUSED,
- UNUSED,
- UNUSED, /* 0x18 */
- UNUSED,
- UNUSED,
- UNUSED,
- UNUSED, /* 0x1c */
- UNUSED,
- UNUSED,
- UNUSED,
-};
-
-/*
- * unaligned_get_address()
- * get an address using save_an and save_dn registers, and updates save_an
- * with side effects
- */
-unsigned char *unaligned_get_address(int thread, int specifier, int four_byte,
- unsigned int save_an[],
- unsigned int save_dn[], int *write_back_an)
-{
- unsigned char *address;
-
- int areg = (specifier >> 5) & 7;
- if ((specifier >> 8) == 2) {
- int offset = specifier & 0xf;
- offset = ((offset << 28) >> 28);
- if (likely(four_byte)) {
- offset <<= 2;
- } else {
- offset <<= 1;
- }
- if (specifier & 0x10) {
- address = (unsigned char *)(save_an[areg] + offset);
- } else {
- address = (unsigned char *)save_an[areg];
- }
- save_an[areg] = save_an[areg] + offset;
-
- /*
- * Let caller know An registers have been modified.
- */
- *write_back_an = 1;
- } else if ((specifier >> 8) == 3) {
- int dreg = specifier & 0xf;
- if (likely(four_byte)) {
- address = (unsigned char *)(save_an[areg] +
- (save_dn[dreg] << 2));
- } else {
- address = (unsigned char *)(save_an[areg] +
- (save_dn[dreg] << 1));
- }
- } else {
- int offset = ((specifier >> 3) & 0x60) | (specifier & 0x1f);
- if (likely(four_byte)) {
- address = (unsigned char *)(save_an[areg] +
- (offset << 2));
- } else {
- address = (unsigned char *)(save_an[areg] +
- (offset << 1));
- }
- }
-
- return address;
-}
-
-static int save_dn[16];
-static int save_an[8];
-static int save_acc[5];
-
-/*
- * unaligned_emulate()
- * emulate the instruction at thread's pc that has taken an unaligned data
- * trap.
- *
- * source or destination or both might be unaligned
- * the instruction must have a memory source or destination or both
- * the emulated instruction is copied and executed in this thread
- *
- * TODO: Protection is handled outside of this function
- * TODO: handling simultaneous unaligned and memory protection traps
- *
- * Get thread state
- * the PC and instruction (and local copy, emulate_inst), and An
- * and Dn registers
- * All implicit soruce state (source3, CSR, accumulators)
-
- * if the instruction has a memory source
- * Use the instruction, An and Dn registers to form src_address
- * get unaligned source data from src_address (usually sign
- * extended)
- * (2 bytes, with or without sign extension, or 4 bytes)
- * modify emulate_inst to use d0 as source
- * else
- * get the soure operand from one of thread's registers
- * if instruction has a memory destination
- * Use the instruction, An and Dn registers to form dest_address
- * modify emulate_inst to use d0 as destination
- * if there was a memory source
- * put the source data in thread's d0
- * get the source-2 Dn operand and source 3 operand from thread
- * execute modified inst
- * (save it, flush caches, set up local values for implicit
- * sources, execute, save explicit and implicit results)
- * if inst has destination address
- * copy result to dest_address, possibly unaligned, 1, 2, or 4
- * bytes
- * restore thread's implicit results (modified address registers, CSR,
- * accumulators) add 4 to thread's pc
- */
-void unaligned_emulate(unsigned int thread)
-{
- unsigned int pc;
- unsigned int inst;
- unsigned int op;
- unsigned int subop;
- int format;
- unsigned int emulate_inst;
- int four_byte;
- int src_operand, dest_operand;
- int save_csr;
- int source3;
- unsigned int source1;
- unsigned int source_data;
- unsigned char *dest_address = NULL;
- int source2 = 0;
- unsigned int result;
- unsigned int write_back_an = 0;
- unsigned int chip_id_copy;
-
- extern unsigned int trap_emulate;
- extern unsigned int ubicom32_emulate_insn(int source1, int source2,
- int source3, int *save_acc,
- int *save_csr);
-
- /*
- * get the chip_id
- */
- asm volatile (
- " move.4 %0, chip_id \n\t" /* get chip_id. */
- : "=r"(chip_id_copy)
- :
- );
-
- /*
- * get the pc
- */
- asm volatile (
- " move.4 CSR, %1 \n\t" /* set source thread in
- * CSR */
- " setcsr_flush 0 \n\t"
- " move.4 %0, pc \n\t"
- " move.4 CSR, #0 \n\t" /* restore CSR */
- " setcsr_flush 0 \n\t"
- : "=a"(pc)
- : "d" ((1 << 8) | (thread << 9))
- : "cc"
- );
-
- inst = *((unsigned int *)pc);
- op = inst >> 27;
- if (unlikely(op == 2 || op == 6)) {
- subop = (inst >> 21) & 0x1f;
- } else {
- subop = (inst >> 11) & 0x1f;
- }
- format = op_format[op];
- emulate_inst = inst;
-
- if (op == 0) {
- format = op_0_format[subop];
- } else if (op == 2) {
- format = op_2_format[subop];
- } else if (op == 6) {
- format = op_6_format[subop];
- }
-
- if (unlikely(format == UNUSED)) {
- /*
- * We are not going to emulate this. Bump PC by 4 and move on.
- */
- asm volatile (
- " move.4 CSR, %0 \n\t"
- " setcsr_flush 0 \n\t"
- " move.4 pc, %1 \n\t"
- " setcsr #0 \n\t"
- " setcsr_flush 0 \n\t"
- :
- : "d"((1 << 14) | (thread << 15)), "d"(pc + 4)
- : "cc"
- );
- return;
- }
-
- four_byte = (format == TWO_OP || format == DEST || format == SRC);
-
- /*
- * source or destination memory operand needs emulation
- */
- src_operand = (format == SRC ||
- format == SRC_2 ||
- format == TWO_OP ||
- format == TWO_OP_2) &&
- ((inst >> 8) & 7) > 1;
-
- dest_operand = (format == DEST ||
- format == DEST_2 ||
- format == TWO_OP ||
- format == TWO_OP_2) &&
- ((inst >> 24) & 7) > 1;
-
- /*
- * get thread's implicit sources (not covered by source context select).
- * data and address registers and CSR (for flag bits) and src3 and
- * accumulators
- */
- asm volatile (
- " move.4 CSR, %2 \n\t" /* set source thread in
- * CSR */
- " setcsr_flush 0 \n\t"
- " move.4 (%3), d0 \n\t" /* get dn registers */
- " move.4 4(%3), d1 \n\t"
- " move.4 8(%3), d2 \n\t"
- " move.4 12(%3), d3 \n\t"
- " move.4 16(%3), d4 \n\t"
- " move.4 20(%3), d5 \n\t"
- " move.4 24(%3), d6 \n\t"
- " move.4 28(%3), d7 \n\t"
- " move.4 32(%3), d8 \n\t"
- " move.4 36(%3), d9 \n\t"
- " move.4 40(%3), d10 \n\t"
- " move.4 44(%3), d11 \n\t"
- " move.4 48(%3), d12 \n\t"
- " move.4 52(%3), d13 \n\t"
- " move.4 56(%3), d14 \n\t"
- " move.4 60(%3), d15 \n\t"
- " move.4 (%4), a0 \n\t" /* get an registers */
- " move.4 4(%4), a1 \n\t"
- " move.4 8(%4), a2 \n\t"
- " move.4 12(%4), a3 \n\t"
- " move.4 16(%4), a4 \n\t"
- " move.4 20(%4), a5 \n\t"
- " move.4 24(%4), a6 \n\t"
- " move.4 28(%4), a7 \n\t"
- " move.4 %0, CSR \n\t" /* get csr and source3
- * implicit operands */
- " move.4 %1, source3 \n\t"
- " move.4 (%5), acc0_lo \n\t" /* get accumulators */
- " move.4 4(%5), acc0_hi \n\t"
- " move.4 8(%5), acc1_lo \n\t"
- " move.4 12(%5), acc1_hi \n\t"
- " move.4 16(%5), mac_rc16 \n\t"
- " move.4 CSR, #0 \n\t" /* restore CSR */
- " setcsr_flush 0 \n\t"
- : "=m"(save_csr), "=m"(source3)
- : "d"((1 << 8) | (thread << 9)),
- "a"(save_dn), "a"(save_an), "a"(save_acc)
- : "cc"
- );
-
- /*
- * turn off thread select bits if they were on
- */
- BUG_ON((save_csr & 0x04100) != 0);
- if (unlikely(save_csr & 0x04100)) {
- /*
- * Things are in funny state as thread select bits are on in
- * csr. PANIC.
- */
- panic("In unaligned trap handler. Trap thread CSR has thread "
- "select bits on.\n");
- }
-
- save_csr = save_csr & 0x1000ff;
-
- /*
- * get the source1 operand
- */
- source1 = 0;
- if (src_operand) {
- unsigned char *src_address;
-
- /*
- * source1 comes from memory
- */
- BUG_ON(!(format == TWO_OP || format == TWO_OP_2 ||
- format == SRC || format == SRC_2));
- src_address = unaligned_get_address(thread, inst & 0x7ff,
- four_byte, save_an,
- save_dn, &write_back_an);
-
- /*
- * get data (possibly unaligned)
- */
- if (likely(four_byte)) {
- source_data = (*src_address << 24) |
- (*(src_address + 1) << 16) |
- (*(src_address + 2) << 8) |
- *(src_address + 3);
- source1 = source_data;
- } else {
- source1 = *src_address << 8 |
- *(src_address + 1);
-
- /*
- * Source is not extended if the instrution is MOVE.2 or
- * if the cpu CHIP_ID >= 0x30000 and the instruction is
- * either LSL.2 or LSR.2. All other cases have to be
- * sign extended.
- */
- if ((!(op == 2 && subop == MOVE_2)) &&
- (!((chip_id_copy >= 0x30000) &&
- (subop == LSL_2 || subop == LSR_2)))) {
- /*
- * Have to sign extend the .2 entry.
- */
- source1 = ((unsigned int)
- ((signed int)
- ((signed short) source1)));
- }
- }
- } else if (likely(op != MOVEI)) {
- /*
- * source1 comes from a register, using move.4 d0, src1
- * unaligned_emulate_get_source is pointer to code to insert remulated instruction
- */
- extern unsigned int unaligned_emulate_get_src;
- *((int *)&unaligned_emulate_get_src) &= ~(0x7ff);
- *((int *)&unaligned_emulate_get_src) |= (inst & 0x7ff);
- flush_dcache_range((unsigned long)(&unaligned_emulate_get_src),
- (unsigned long)(&unaligned_emulate_get_src) + 4);
-
- asm volatile (
- /* source1 uses thread's registers */
- " move.4 CSR, %1 \n\t"
- " setcsr_flush 0 \n\t"
- "unaligned_emulate_get_src: \n\t"
- " move.4 %0, #0 \n\t"
- " setcsr #0 \n\t"
- " setcsr_flush 0 \n\t"
- : "=d" (source1)
- : "d" ((1 << 8) | (thread << 9))
- : "cc"
- );
- }
-
- /*
- * get the destination address
- */
- if (dest_operand) {
- BUG_ON(!(format == TWO_OP || format == TWO_OP_2 ||
- format == DEST || format == DEST_2));
- dest_address = unaligned_get_address(thread,
- ((inst >> 16) & 0x7ff),
- four_byte, save_an,
- save_dn, &write_back_an);
- }
-
- if (write_back_an) {
- /*
- * restore any modified An registers
- */
- asm volatile (
- " move.4 CSR, %0 \n\t"
- " setcsr_flush 0 \n\t"
- " move.4 a0, (%1) \n\t"
- " move.4 a1, 4(%1) \n\t"
- " move.4 a2, 8(%1) \n\t"
- " move.4 a3, 12(%1) \n\t"
- " move.4 a4, 16(%1) \n\t"
- " move.4 a5, 20(%1) \n\t"
- " move.4 a6, 24(%1) \n\t"
- " move.4 a7, 28(%1) \n\t"
- " setcsr #0 \n\t"
- " setcsr_flush 0 \n\t"
- :
- : "d" ((1 << 14) | (thread << 15)), "a" (save_an)
- : "cc"
- );
- }
-
- /*
- * get source 2 register if needed, and modify inst to use d1 for
- * source-2 source-2 will come from this thread, not the trapping thread
- */
- source2 = 0;
- if ((op >= 8 && op <= 0x17) ||
- ((op == 2 || op == 6) && (inst & 0x4000000))) {
- int src_dn = (inst >> 11) & 0xf;
- source2 = save_dn[src_dn];
- /*
- * force the emulated instruction to use d1 for source2 operand
- */
- emulate_inst = (emulate_inst & 0xffff07ff) | 0x800;
- }
-
- if (likely(op != MOVEI)) {
- /*
- * change emulated instruction source1 to d0
- */
- emulate_inst &= ~0x7ff;
- emulate_inst |= 1 << 8;
- }
-
- if (unlikely(op == 6 || op == 2)) {
- /*
- * Set destination to d0
- */
- emulate_inst &= ~(0xf << 16);
- } else if (likely(op != CMPI)) {
- /*
- * Set general destination field to d0.
- */
- emulate_inst &= ~(0x7ff << 16);
- emulate_inst |= 1 << 24;
- }
-
- /*
- * execute emulated instruction d0, to d0, no memory access
- * source2 if needed will be in d1
- * source3, CSR, and accumulators are set up before execution
- */
- *((unsigned int *)&trap_emulate) = emulate_inst;
- flush_dcache_range((unsigned long)(&trap_emulate),
- (unsigned long)(&trap_emulate) + 4);
-
- result = ubicom32_emulate_insn(source1, source2, source3,
- save_acc, &save_csr);
-
- /*
- * set the result value
- */
- if (dest_operand) {
- /*
- * copy result to memory
- */
- if (four_byte) {
- *dest_address++ =
- (unsigned char)((result >> 24) & 0xff);
- *dest_address++ =
- (unsigned char)((result >> 16) & 0xff);
- }
- *dest_address++ = (unsigned char)((result >> 8) & 0xff);
- *dest_address = (unsigned char)(result & 0xff);
- } else if (likely(op != CMPI)) {
- /*
- * copy result to a register, using move.4 dest, result
- */
- extern unsigned int unaligned_trap_set_result;
- *((unsigned int *)&unaligned_trap_set_result) &= ~0x7ff0000;
-
- if (op == 2 || op == 6) {
- *((unsigned int *)&unaligned_trap_set_result) |=
- ((inst & 0x000f0000) | 0x01000000);
- } else {
- *((unsigned int *)&unaligned_trap_set_result) |=
- (inst & 0x7ff0000);
- }
- flush_dcache_range((unsigned long)&unaligned_trap_set_result,
- ((unsigned long)(&unaligned_trap_set_result) + 4));
-
- asm volatile (
- /* result uses thread's registers */
- " move.4 CSR, %1 \n\t"
- " setcsr_flush 0 \n\t"
- "unaligned_trap_set_result: \n\t"
- " move.4 #0, %0 \n\t"
- " setcsr #0 \n\t"
- " setcsr_flush 0 \n\t"
- :
- : "d"(result), "d" ((1 << 14) | (thread << 15))
- : "cc"
- );
- }
-
- /*
- * bump PC in thread and restore implicit register changes
- */
- asm volatile (
- " move.4 CSR, %0 \n\t"
- " setcsr_flush 0 \n\t"
- " move.4 pc, %1 \n\t"
- " move.4 acc0_lo, (%3) \n\t"
- " move.4 acc0_hi, 4(%3) \n\t"
- " move.4 acc1_lo, 8(%3) \n\t"
- " move.4 acc1_hi, 12(%3) \n\t"
- " move.4 mac_rc16, 16(%3) \n\t"
- " move.4 CSR, %2 \n\t"
- " setcsr #0 \n\t"
- " setcsr_flush 0 \n\t"
- :
- : "d"((1 << 14) | (thread << 15)),
- "d"(pc + 4), "d"(save_csr), "a"(save_acc)
- : "cc"
- );
-}
-
-/*
- * unaligned_only()
- * Return true if either of the unaligned causes are set (and no others).
- */
-int unaligned_only(unsigned int cause)
-{
- unsigned int unaligned_cause_mask =
- (1 << TRAP_CAUSE_DST_MISALIGNED) |
- (1 << TRAP_CAUSE_SRC1_MISALIGNED);
-
- BUG_ON(cause == 0);
- return (cause & unaligned_cause_mask) == cause;
-}
+++ /dev/null
-/*
- * arch/ubicom32/kernel/vmlinux.lds.S
- * vmlinux primary linker script
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/ocm_size.h>
-#include <asm/memory_map.h>
-#include <asm/thread_info.h>
-#include <linux/threads.h>
-
-/*
- * Sanity checks to prevent errors later on that are much harder to understand
- */
-#if !defined APP_OCM_CODE_SIZE
-#error APP_OCM_CODE_SIZE has not been defined in ocm_size.h
-#endif
-
-#if !defined APP_OCM_DATA_SIZE
-#error APP_OCM_DATA_SIZE has not been defined in ocm_size.h
-#endif
-
-/*
- * The `free' ocm area that ultra does not use.
- */
-#if APP_OCM_CODE_SIZE || APP_OCM_DATA_SIZE
-#define OCM_FREE_START (OCMSTART + APP_OCM_CODE_SIZE)
-#define OCM_FREE_LENGTH (OCMSIZE - APP_OCM_CODE_SIZE - APP_OCM_DATA_SIZE)
-#else
-#define OCM_FREE_START OCMEND
-#define OCM_FREE_LENGTH 0
-#endif
-
-/*
- * If you want to limit OCM use for text/data or completely disable it
- * you can change these values.
- */
-#define OCM_TEXT_LENGTH OCM_FREE_LENGTH
-#define OCM_DATA_LENGTH OCM_FREE_LENGTH
-
-#define RAM_START KERNELSTART
-#define RAM_LENGTH ((SDRAMSTART + CONFIG_MIN_RAMSIZE) - RAM_START)
-#define TEXT ram
-#define DATA ram
-#define INIT ram
-#define BSS ram
-
-#ifndef DATA_ADDR
-#define DATA_ADDR
-#endif
-
-#include <asm-generic/vmlinux.lds.h>
-
-OUTPUT_ARCH(ubicom32)
-ENTRY(_start)
-
-MEMORY {
- ram : ORIGIN = RAM_START, LENGTH = RAM_LENGTH
- syscall : ORIGIN = OS_SYSCALL_BEGIN, LENGTH = (OS_SYSCALL_END - OS_SYSCALL_BEGIN)
- ocm : ORIGIN = OCM_FREE_START, LENGTH = OCM_FREE_LENGTH
-}
-
-jiffies = jiffies_64 + 4;
-
-/*
- * Fixed locations required by gdb coredumps.
- *
- * Note that the names are what gdb is expecting so renaming will break
- * the toolchain.
- */
-__ocm_begin = OCMSTART;
-__ocm_limit = __ocm_begin + OCMSIZE;
-__sdram_begin = SDRAMSTART;
-__sdram_limit = __sdram_begin + CONFIG_MIN_RAMSIZE;
-__filemedia_begin_addr = FLASHSTART;
-__filemedia_end_addr = __filemedia_begin_addr + 0x00800000;
-
-/*
- * For internal diagnostics
- */
-__os_syscall_begin = OS_SYSCALL_BEGIN;
-__os_syscall_end = OS_SYSCALL_END;
-
-SECTIONS {
-
- .fixed_text : {
- _begin = .;
- *(.skip_syscall)
- *(.old_syscall_entry.text)
- __fixed_text_end = .;
- } > TEXT
- . = _begin + SIZEOF(.fixed_text) ;
-
- /*
- * System call text in lower ocm (fixed location, can never change)
- */
- __syscall_text_load_begin = .;
- __syscall_text_run_begin = OS_SYSCALL_BEGIN;
-
- .syscall_text __syscall_text_run_begin : AT(__syscall_text_load_begin) {
- *(.syscall_entry.text) /* Must be at OS_SYSCALL_BEGIN 0x3ffc0040 */
- *(.kernel_unprotected)
- . = ALIGN(4);
- __syscall_text_run_end = .;
- } > syscall /* .syscall_text */
- . = __syscall_text_load_begin + __syscall_text_run_end - __syscall_text_run_begin ;
- __ocm_text_load_begin = .;
- __ocm_text_run_begin = OCM_FREE_START ;
- .ocm_text __ocm_text_run_begin : AT(__ocm_text_load_begin) {
-#if OCM_TEXT_LENGTH
- *(.ocm_text)
- *(.sched.text)
- *(.spinlock.text)
-#include <asm/ocm_text.lds.inc>
- . = ALIGN(4);
-#endif
- __ocm_text_run_end = .;
- __data_begin = ALIGN(OCM_SECTOR_SIZE);
- } > ocm /* .ocm_text */
-
- .ocm_module_text __ocm_text_run_end (NOLOAD) : AT(__ocm_text_run_end) {
- __ocm_inst_heap_begin = .;
- /* Reserve the min requested */
- . += (CONFIG_OCM_MODULES_RESERVATION) * 1024;
-#ifdef CONFIG_OCM_MODULES_MAY_CONSUME_REMAINING_CODESPACE
- /* Round up to OCM sector size (we cannot use it for data) */
- . = ALIGN(OCM_SECTOR_SIZE);
-#endif
- __ocm_inst_heap_end = .;
- /* update __data_begin */
- __data_begin = ALIGN(OCM_SECTOR_SIZE);
- } > ocm /* .ocm_module_text */
-
- . = __ocm_text_load_begin + __ocm_text_run_end - __ocm_text_run_begin ;
- __ocm_text_load_end = .;
-
- __ocm_data_load_begin = .;
- __ocm_data_run_begin = __data_begin ;
-#if OCM_DATA_LENGTH
- .ocm_data __ocm_data_run_begin : AT(__ocm_data_load_begin) {
-#if defined(CONFIG_IRQSTACKS_USEOCM)
- percpu_irq_stacks = .;
- . += NR_CPUS * THREAD_SIZE;
-#endif
- *(.ocm_data)
- . = ALIGN(4) ;
- __ocm_data_run_end = .;
- } > ocm
- . = __ocm_data_load_begin + __ocm_data_run_end - __ocm_data_run_begin ;
-#else
- __ocm_data_run_end = __ocm_data_run_begin;
-#endif
- __ocm_data_load_end = .;
-
- __ocm_free_begin = __ocm_data_run_end;
- __ocm_free_end = OCM_FREE_START + OCM_FREE_LENGTH;
-
- .text __ocm_data_load_end : AT(__ocm_data_load_end) {
- . = ALIGN(4);
- _stext = .;
- _text = .;
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- *(.text.lock)
- *(.text.__libgcc_udivmodsi)
- *(.text.__libgcc_divmodsi)
- *(.text.__libgcc_muldi3)
- *(.text.__libgcc_udivmoddi)
- *(.text.__libgcc_divmoddi)
- *(.text.*)
-#if OCM_TEXT_LENGTH == 0
- *(.ocm_text)
- *(.sched.text)
- *(.spinlock.text)
-#endif
- . = ALIGN(16); /* Exception table */
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
-
- *(.rodata) *(.rodata.*)
- *(__vermagic) /* Kernel version magic */
- *(__markers_strings)
- *(.rodata1)
- *(.rodata.str1.1)
- *(__tracepoints_strings)
-
- /* PCI quirks */
- __start_pci_fixups_early = . ;
- *(.pci_fixup_early)
- __end_pci_fixups_early = . ;
- __start_pci_fixups_header = . ;
- *(.pci_fixup_header)
- __end_pci_fixups_header = . ;
- __start_pci_fixups_final = . ;
- *(.pci_fixup_final)
- __end_pci_fixups_final = . ;
- __start_pci_fixups_enable = . ;
- *(.pci_fixup_enable)
- __end_pci_fixups_enable = . ;
- __start_pci_fixups_resume = . ;
- *(.pci_fixup_resume)
- __end_pci_fixups_resume = . ;
- __start_pci_fixups_resume_early = . ;
- *(.pci_fixup_resume_early)
- __end_pci_fixups_resume_early = . ;
- __start_pci_fixups_suspend = . ;
- *(.pci_fixup_suspend)
- __end_pci_fixups_suspend = . ;
-
- __start_builtin_fw = . ;
- *(.builtin_fw)
- __end_builtin_fw = . ;
-
-
- /* Kernel symbol table: Normal symbols */
- . = ALIGN(4);
- __start___ksymtab = .;
- *(__ksymtab)
- __stop___ksymtab = .;
-
- /* Kernel symbol table: GPL-only symbols */
- __start___ksymtab_gpl = .;
- *(__ksymtab_gpl)
- __stop___ksymtab_gpl = .;
-
- /* Kernel symbol table: Normal unused symbols */
- __start___ksymtab_unused = .;
- *(__ksymtab_unused)
- __stop___ksymtab_unused = .;
-
- /* Kernel symbol table: GPL-only unused symbols */
- __start___ksymtab_unused_gpl = .;
- *(__ksymtab_unused_gpl)
- __stop___ksymtab_unused_gpl = .;
-
- /* Kernel symbol table: GPL-future symbols */
- __start___ksymtab_gpl_future = .;
- *(__ksymtab_gpl_future)
- __stop___ksymtab_gpl_future = .;
-
- /* Kernel symbol table: Normal symbols */
- __start___kcrctab = .;
- *(__kcrctab)
- __stop___kcrctab = .;
-
- /* Kernel symbol table: GPL-only symbols */
- __start___kcrctab_gpl = .;
- *(__kcrctab_gpl)
- __stop___kcrctab_gpl = .;
-
- /* Kernel symbol table: GPL-future symbols */
- __start___kcrctab_gpl_future = .;
- *(__kcrctab_gpl_future)
- __stop___kcrctab_gpl_future = .;
-
- /* Kernel symbol table: strings */
- *(__ksymtab_strings)
-
- /* Built-in module parameters */
- . = ALIGN(4) ;
- __start___param = .;
- *(__param)
- __stop___param = .;
-
- . = ALIGN(4) ;
- _etext = . ;
- } > TEXT
-
- .data DATA_ADDR : {
- . = ALIGN(4);
- _sdata = . ;
- DATA_DATA
-#if OCM_DATA_LENGTH == 0
- *(.ocm_data)
-#endif
- . = ALIGN(8192) ;
- _data_protection_end = .;
- *(.data.init_task)
- . = ALIGN(4);
- _edata = . ;
- } > DATA
-
- .init : {
- . = ALIGN(4096);
- __init_begin = .;
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- *(.init.rodata)
- INIT_DATA
- . = ALIGN(16);
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- ___security_initcall_start = .;
- *(.security_initcall.init)
- ___security_initcall_end = .;
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(4);
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
-#endif
- . = ALIGN(4096);
- __per_cpu_start = .;
- *(.data.percpu)
- *(.data.percpu.shared_aligned)
- __per_cpu_end = .;
-
- . = ALIGN(4096);
- __init_end = .;
- } > INIT
-
- .eh_frame :
- {
- PROVIDE (___eh_frame_begin = .);
- *(.eh_frame)
- LONG (0);
- PROVIDE (___eh_frame_end = .);
- } > INIT
-
- /DISCARD/ : {
- EXIT_TEXT
- EXIT_DATA
- *(.exitcall.exit)
- }
-
- .bss : {
- . = ALIGN(4);
- _sbss = . ;
- *(.bss)
- *(COMMON)
- . = ALIGN(4) ;
- _ebss = . ;
- _end = . ;
- } > BSS
-
- NOTES > BSS
-
-}
+++ /dev/null
-#
-# arch/ubicom32/lib/Makefile
-# <TODO: Replace with short file description>
-#
-# (C) Copyright 2009, Ubicom, Inc.
-#
-# This file is part of the Ubicom32 Linux Kernel Port.
-#
-# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-# it and/or modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation, either version 2 of the
-# License, or (at your option) any later version.
-#
-# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with the Ubicom32 Linux Kernel Port. If not,
-# see <http://www.gnu.org/licenses/>.
-#
-# Ubicom32 implementation derived from (with many thanks):
-# arch/m68knommu
-# arch/blackfin
-# arch/parisc
-#
-#
-# Makefile for m68knommu specific library files..
-#
-
-lib-y := checksum.o delay.o mem_ubicom32.o
+++ /dev/null
-/*
- * arch/ubicom32/lib/checksum.c
- * Optimized checksum utilities for IP.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-/*
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * IP/TCP/UDP checksumming routines
- *
- * Authors: Jorge Cwik, <jorge@laser.satlink.net>
- * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- * Tom May, <ftom@netcom.com>
- * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
- * Lots of code moved from tcp.c and ip.c; see those files
- * for more names.
- *
- * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek:
- * Fixed some nasty bugs, causing some horrible crashes.
- * A: At some points, the sum (%0) was used as
- * length-counter instead of the length counter
- * (%1). Thanks to Roman Hodek for pointing this out.
- * B: GCC seems to mess up if one uses too many
- * data-registers to hold input values and one tries to
- * specify d0 and d1 as scratch registers. Letting gcc choose these
- * registers itself solves the problem.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access kills, so most
- of the assembly has to go. */
-
-#include <linux/module.h>
-#include <net/checksum.h>
-
-static unsigned long do_csum(const unsigned char * buff, int len)
-{
- int count;
- unsigned long result = 0;
-
- /*
- * The following optimized assembly code cannot handle data length less than 7 bytes!
- */
- if (likely(len >= 7)) {
- len -= (4 - (int)buff) & 3;
- count = len >> 2;
- asm (
- " sub.4 d15, #0, %2 \n\t" // set up for jump table
- " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1)
-
- " bfextu d14, %0, #2 \n\t" // test 2 LSB of buff
- " jmpne.w.f 100f \n\t"
- " add.4 %1, #0, %1 \n\t" // clear C
- " moveai a3, #%%hi(1f) \n\t" // table jump
- " lea.1 a3, %%lo(1f)(a3) \n\t"
- " lea.4 a3, (a3,d15) \n\t"
- " calli a3, 0(a3) \n\t"
-
- "100: sub.4 %0, %0, d14 \n\t"
- " sub.4 d14, #4, d14 \n\t"
- " lsl.4 d14, d14, #3 \n\t"
- " add.4 %1, #0, %1 \n\t" // clear C
- " moveai a3, #%%hi(1f) \n\t" // table jump
- " lea.1 a3, %%lo(1f)(a3) \n\t"
- " lea.4 a3, (a3,d15) \n\t"
- " bfextu %1, (%0)4++, d14 \n\t" // read first partial word
- " calli a3, 0(a3) \n\t"
-#if 1
- "200: lsl.4 %3, %3, #3 \n\t"
- " bfrvrs d15, (%0), #0 \n\t" // read last word (partial)
- " bfextu d15, d15, %3 \n\t"
- " bfrvrs d15, d15, #0 \n\t"
- " add.4 %1, d15, %1 \n\t"
- " addc %1, #0, %1 \n\t" // sample C again
- " jmpt.w.t 2f \n\t"
-#else
- "200: move.1 d15, 0(%0) \n\t"
- " lsl.4 d15, d15, #8 \n\t"
- " add.4 %1, d15, %1 \n\t"
- " addc %1, #0, %1 \n\t" // sample C again
- " add.4 %3, #-1, %3 \n\t"
- " jmpeq.w.t 2f \n\t"
-
- " move.1 d15, 1(%0) \n\t"
- " add.4 %1, d15, %1 \n\t"
- " addc %1, #0, %1 \n\t" // sample C again
- " add.4 %3, #-1, %3 \n\t"
- " jmpeq.w.t 2f \n\t"
-
- " move.1 d15, 2(%0) \n\t"
- " lsl.4 d15, d15, #8 \n\t"
- " add.4 %1, d15, %1 \n\t"
- " addc %1, #0, %1 \n\t" // sample C again
- " jmpt.w.t 2f \n\t"
-#endif
-#if defined(IP7000) || defined(IP7000_REV2)
- "300: swapb.2 %1, %1 \n\t"
-#else
- "300: shmrg.2 %1, %1, %1 \n\t"
- " lsr.4 %1, %1, #8 \n\t"
- " bfextu %1, %1, #16 \n\t"
-#endif
- " jmpt.w.t 3f \n\t"
-
- "1: add.4 %1, (%0)4++, %1 \n\t" // first add without C
- " .rept 31 \n\t"
- " addc %1, (%0)4++, %1 \n\t"
- " .endr \n\t"
- " addc %1, #0, %1 \n\t" // sample C again
- " add.4 %2, #-32, %2 \n\t"
- " jmpgt.w.t 1b \n\t"
-
- " and.4 %3, #3, %3 \n\t" // check n
- " jmpne.w.f 200b \n\t"
-
- "2: .rept 2 \n\t"
- " lsr.4 d15, %1, #16 \n\t"
- " bfextu %1, %1, #16 \n\t"
- " add.4 %1, d15, %1 \n\t"
- " .endr \n\t"
- " btst d14, #3 \n\t" // start from odd address (<< 3)?
- " jmpne.w.f 300b \n\t"
- "3: \n\t"
-
- : "+a"(buff), "+d"(result), "+d"(count), "+d"(len)
- :
- : "d15", "d14", "a3", "cc"
- );
-
- return result;
- }
-
- /*
- * handle a few bytes and fold result into 16-bit
- */
- while (len-- > 0) {
- result += (*buff++ << 8);
- if (len) {
- result += *buff++;
- len--;
- }
- }
- asm (
- " .rept 2 \n\t"
- " lsr.4 d15, %0, #16 \n\t"
- " bfextu %0, %0, #16 \n\t"
- " add.4 %0, d15, %0 \n\t"
- " .endr \n\t"
- : "+d" (result)
- :
- : "d15", "cc"
- );
-
- return result;
-}
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
- return (__force __sum16)~do_csum(iph,ihl*4);
-}
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
- unsigned int result = do_csum(buff, len);
-
- /* add in old sum, and carry.. */
- result += (__force u32)sum;
- if ((__force u32)sum > result)
- result += 1;
- return (__force __wsum)result;
-}
-
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
- return (__force __sum16)~do_csum(buff,len);
-}
-
-/*
- * copy from fs while checksumming, otherwise like csum_partial
- */
-
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum sum, int *csum_err)
-{
- if (csum_err) *csum_err = 0;
- memcpy(dst, (__force const void *)src, len);
- return csum_partial(dst, len, sum);
-}
-
-/*
- * copy from ds while checksumming, otherwise like csum_partial
- */
-
-__wsum
-csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
-{
- memcpy(dst, src, len);
- return csum_partial(dst, len, sum);
-}
+++ /dev/null
-/*
- * arch/ubicom32/lib/delay.c
- * Ubicom32 implementation of udelay()
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/module.h>
-#include <asm/param.h>
-#include <asm/delay.h>
-#include <asm/ip5000.h>
-
-/*
- * read_current_timer()
- * Return the current value of sysval.
- */
-int __devinit read_current_timer(unsigned long *timer_val)
-{
- *timer_val = (long)(UBICOM32_IO_TIMER->sysval);
- return 0;
-}
-
-
-void udelay(unsigned long usecs)
-{
- _udelay(usecs);
-}
-EXPORT_SYMBOL(udelay);
+++ /dev/null
-/*
- * arch/ubicom32/lib/mem_ubicom32.c
- * String functions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-#define LIKELY likely
-#define UNLIKELY unlikely
-
-typedef u32_t addr_t;
-
-/*
- * memcpy()
- */
-void *memcpy(void *dest, const void *src, size_t n)
-{
- void *dest_ret = dest;
-
- if (LIKELY((((addr_t)dest ^ (addr_t)src) & 3) == 0) && LIKELY(n > 6)) {
- size_t m;
- n -= (4 - (addr_t)dest) & 0x03;
- m = n >> 2;
- asm volatile (
- " sub.4 d15, #0, %2 \n\t" // set up for jump table
- " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1)
- " moveai a3, #%%hi(1f) \n\t"
- " lea.1 a3, %%lo(1f)(a3) \n\t"
- " lea.4 a3, (a3,d15) \n\t"
-
- " bfextu d15, %0, #2 \n\t" // d15 = (dest & 3)
- " jmpne.w.f 100f \n\t"
- " calli a3, 0(a3) \n\t" // 4-byte alignment
-
- "100: cmpi d15, #2 \n\t"
- " jmpne.s.f 101f \n\t"
- " move.2 (%0)2++, (%1)2++ \n\t"
- " calli a3, 0(a3) \n\t" // 2-byte alignment
-
- "101: move.1 (%0)1++, (%1)1++ \n\t"
- " jmpgt.s.f 102f \n\t" // 3-byte alignment
- " move.2 (%0)2++, (%1)2++ \n\t" // 1-byte alignment
- "102: calli a3, 0(a3) \n\t"
-
- "200: cmpi %3, #2 \n\t"
- " jmplt.s.f 201f \n\t"
- " move.2 (%0)2++, (%1)2++ \n\t"
- " jmpeq.s.t 2f \n\t"
- "201: move.1 (%0)1++, (%1)1++ \n\t"
- " jmpt.w.t 2f \n\t"
-
- "1: .rept 25 \n\t"
- " movea (%0)4++, (%1)4++ \n\t"
- " .endr \n\t"
- " .rept 7 \n\t"
- " move.4 (%0)4++, (%1)4++ \n\t"
- " .endr \n\t"
- " add.4 %2, #-32, %2 \n\t"
- " jmpgt.w.f 1b \n\t"
-
- " and.4 %3, #3, %3 \n\t" // check n
- " jmpne.w.f 200b \n\t"
- "2: \n\t"
- : "+a" (dest), "+a" (src), "+d" (m), "+d" (n)
- :
- : "d15", "a3", "memory", "cc"
- );
-
- return dest_ret;
- }
-
- if (LIKELY((((addr_t)dest ^ (addr_t)src) & 1) == 0) && LIKELY(n > 2)) {
- size_t m;
- n -= (addr_t)dest & 0x01;
- m = n >> 1;
- asm volatile (
- " sub.4 d15, #0, %2 \n\t" // set up for jump table
- " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1)
- " moveai a3, #%%hi(1f) \n\t"
- " lea.1 a3, %%lo(1f)(a3) \n\t"
- " lea.4 a3, (a3,d15) \n\t"
-
- " btst %0, #0 \n\t" // check bit 0
- " jmpne.w.f 100f \n\t"
- " calli a3, 0(a3) \n\t" // 4-byte alignment
-
- "100: move.1 (%0)1++, (%1)1++ \n\t"
- " calli a3, 0(a3) \n\t"
-
- "200: move.1 (%0)1++, (%1)1++ \n\t"
- " jmpt.w.t 2f \n\t"
-
- "1: .rept 32 \n\t"
- " move.2 (%0)2++, (%1)2++ \n\t"
- " .endr \n\t"
- " add.4 %2, #-32, %2 \n\t"
- " jmpgt.w.f 1b \n\t"
-
- " and.4 %3, #1, %3 \n\t" // check n
- " jmpne.w.f 200b \n\t"
- "2: \n\t"
-
- : "+a" (dest), "+a" (src), "+d" (m), "+d" (n)
- :
- : "d15", "a3", "memory", "cc"
- );
-
- return dest_ret;
- }
-
- asm volatile (
- " sub.4 d15, #0, %2 \n\t"
- " jmpeq.w.f 2f \n\t"
- " and.4 d15, #(16-1), d15 \n\t" // d15 = (-n) & (16 - 1)
- " moveai a3, #%%hi(1f) \n\t"
- " lea.1 a3, %%lo(1f)(a3) \n\t"
- " lea.4 a3, (a3,d15) \n\t"
- " calli a3, 0(a3) \n\t"
-
- "1: .rept 16 \n\t"
- " move.1 (%0)1++, (%1)1++ \n\t"
- " .endr \n\t"
- " add.4 %2, #-16, %2 \n\t"
- " jmpgt.w.f 1b \n\t"
- "2: \n\t"
-
- : "+a" (dest), "+a" (src), "+d" (n)
- :
- : "d15", "a3", "memory", "cc"
- );
-
- return dest_ret;
-}
-
-/*
- * memset()
- */
-void *memset(void *s, int c, size_t n)
-{
- void *s_ret = s;
-
- if (LIKELY(n > 6)) {
- size_t m;
- n -= (4 - (addr_t)s) & 0x03;
- m = n >> 2;
- asm volatile (
- " sub.4 d15, #0, %2 \n\t" // set up for jump table
- " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1)
- " shmrg.1 %1, %1, %1 \n\t"
- " shmrg.2 %1, %1, %1 \n\t" // %1 = (c<<24)|(c<<16)|(c<<8)|c
- " moveai a3, #%%hi(1f) \n\t"
- " lea.1 a3, %%lo(1f)(a3) \n\t"
- " lea.4 a3, (a3,d15) \n\t"
-
- " bfextu d15, %0, #2 \n\t" // d15 = (s & 3)
- " jmpne.w.f 100f \n\t"
- " calli a3, 0(a3) \n\t" // 4-byte alignment
-
- "100: cmpi d15, #2 \n\t"
- " jmpne.s.f 101f \n\t"
- " move.2 (%0)2++, %1 \n\t"
- " calli a3, 0(a3) \n\t" // 2-byte alignment
-
- "101: move.1 (%0)1++, %1 \n\t"
- " jmpgt.s.f 102f \n\t" // 3-byte alignment
- " move.2 (%0)2++, %1 \n\t" // 1-byte alignment
- "102: calli a3, 0(a3) \n\t"
-
- "200: cmpi %3, #2 \n\t"
- " jmplt.s.f 201f \n\t"
- " move.2 (%0)2++, %1 \n\t"
- " jmpeq.s.t 2f \n\t"
- "201: move.1 (%0)1++, %1 \n\t"
- " jmpt.w.t 2f \n\t"
-
- "1: .rept 25 \n\t"
- " movea (%0)4++, %1 \n\t"
- " .endr \n\t"
- " .rept 7 \n\t"
- " move.4 (%0)4++, %1 \n\t"
- " .endr \n\t"
- " add.4 %2, #-32, %2 \n\t"
- " jmpgt.w.f 1b \n\t"
-
- " and.4 %3, #3, %3 \n\t" // test bit 1 of n
- " jmpne.w.f 200b \n\t"
- "2: \n\t"
-
- : "+a" (s), "+d" (c), "+d" (m), "+d" (n)
- :
- : "d15", "a3", "memory", "cc"
- );
-
- return s_ret;
- }
-
- asm volatile (
- " sub.4 d15, #0, %2 \n\t"
- " jmpeq.w.f 2f \n\t"
- " and.4 d15, #(8-1), d15 \n\t" // d15 = (-%2) & (16 - 1)
- " moveai a3, #%%hi(1f) \n\t"
- " lea.1 a3, %%lo(1f)(a3) \n\t"
- " lea.4 a3, (a3,d15) \n\t"
- " calli a3, 0(a3) \n\t"
-
- "1: .rept 8 \n\t"
- " move.1 (%0)1++, %1 \n\t"
- " .endr \n\t"
- "2: \n\t"
-
- : "+a" (s), "+d" (c), "+d" (n)
- :
- : "d15", "a3", "memory", "cc"
- );
-
- return s_ret;
-}
-
-void *memmove(void *dest, const void *src, size_t n)
-{
- char *tmp;
- const char *s;
-
- if (n == 0)
- return dest;
-
- tmp = dest;
- s = src;
-
- /*
- * Will perform 16-bit move if possible
- */
- if (likely((((u32)dest | (u32)src | n) & 1) == 0)) {
- if (dest <= src) {
- asm volatile (
- " sub.4 d15, #0, %2 \n\t" // set up for jump table
- " and.4 d15, #(32-2), d15 \n\t" // d15 = (- count) & (32 - 2)
- " moveai a3, #%%hi(1f) \n\t"
- " lea.1 a3, %%lo(1f)(a3) \n\t"
- " lea.2 a3, (a3,d15) \n\t"
- " calli a3, 0(a3) \n\t"
-
- "1: .rept 16 \n\t"
- " move.2 (%0)2++, (%1)2++ \n\t"
- " .endr \n\t"
- " add.4 %2, #-32, %2 \n\t"
- " jmpgt.w.f 1b \n\t"
-
- : "+a" (tmp), "+a" (s), "+d" (n)
- :
- : "d15", "a3", "memory", "cc"
- );
- } else {
- tmp += n;
- s += n;
- asm volatile (
- " sub.4 d15, #0, %2 \n\t" // set up for jump table
- " and.4 d15, #(32-2), d15 \n\t" // d15 = (- count) & (32 - 2)
- " moveai a3, #%%hi(1f) \n\t"
- " lea.1 a3, %%lo(1f)(a3) \n\t"
- " lea.2 a3, (a3,d15) \n\t"
- " calli a3, 0(a3) \n\t"
-
- "1: .rept 16 \n\t"
- " move.2 -2(%0)++, -2(%1)++ \n\t"
- " .endr \n\t"
- " add.4 %2, #-32, %2 \n\t"
- " jmpgt.w.f 1b \n\t"
-
- : "+a" (tmp), "+a" (s), "+d" (n)
- :
- : "d15", "a3", "memory", "cc"
- );
- }
- return dest;
- }
-
- if (dest <= src) {
- asm volatile (
- " sub.4 d15, #0, %2 \n\t" // set up for jump table
- " and.4 d15, #(16-1), d15 \n\t" // d15 = (- count) & (16 - 1)
- " moveai a3, #%%hi(1f) \n\t"
- " lea.1 a3, %%lo(1f)(a3) \n\t"
- " lea.4 a3, (a3,d15) \n\t"
- " calli a3, 0(a3) \n\t"
-
- "1: .rept 16 \n\t"
- " move.1 (%0)1++, (%1)1++ \n\t"
- " .endr \n\t"
- " add.4 %2, #-16, %2 \n\t"
- " jmpgt.w.f 1b \n\t"
- : "+a" (tmp), "+a" (s), "+d" (n)
- :
- : "d15", "a3", "memory", "cc"
- );
- } else {
- tmp += n;
- s += n;
- asm volatile (
- " sub.4 d15, #0, %2 \n\t" // set up for jump table
- " and.4 d15, #(16-1), d15 \n\t" // d15 = (- count) & (16 - 1)
- " moveai a3, #%%hi(1f) \n\t"
- " lea.1 a3, %%lo(1f)(a3) \n\t"
- " lea.4 a3, (a3,d15) \n\t"
- " calli a3, 0(a3) \n\t"
-
- "1: .rept 16 \n\t"
- " move.1 -1(%0)++, -1(%1)++ \n\t"
- " .endr \n\t"
- " add.4 %2, #-16, %2 \n\t"
- " jmpgt.w.f 1b \n\t"
- : "+a" (tmp), "+a" (s), "+d" (n)
- :
- : "d15", "a3", "memory", "cc"
- );
- }
- return dest;
-}
+++ /dev/null
-menuconfig UBICOM_SWITCH
- tristate "Switch devices"
- help
- This option provides Ethernet switch management options via proc fs
-
-if UBICOM_SWITCH
-config UBICOM_SWITCH_BCM539X
- tristate "Broadcom BCM539X series (SPI)"
- depends on SPI_MASTER
- help
- Supports Broadcom BCM539X Gigabit Ethernet Switches over SPI
-endif
+++ /dev/null
-#
-# arch/ubicom32/mach-common/Makefile
-# Makefile for Ubicom32 generic drivers/code.
-#
-# (C) Copyright 2009, Ubicom, Inc.
-#
-# This file is part of the Ubicom32 Linux Kernel Port.
-#
-# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-# it and/or modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation, either version 2 of the
-# License, or (at your option) any later version.
-#
-# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with the Ubicom32 Linux Kernel Port. If not,
-# see <http://www.gnu.org/licenses/>.
-#
-# Ubicom32 implementation derived from (with many thanks):
-# arch/m68knommu
-# arch/blackfin
-# arch/parisc
-#
-
-obj-y += cachectl.o common.o usb_tio.o usb.o ubi32-gpio.o board.o bootargs.o profile.o
-obj-$(CONFIG_PCI) += pci.o io.o
-
-obj-$(CONFIG_FB_UBICOM32) += vdc_tio.o
-obj-$(CONFIG_UBICOM_HID) += ubicom32hid.o
-obj-$(CONFIG_UBICOM_INPUT) += ubicom32input.o
-obj-$(CONFIG_UBICOM_INPUT_I2C) += ubicom32input_i2c.o
-obj-$(CONFIG_UBICOM_SWITCH) += switch-core.o
-obj-$(CONFIG_UBICOM_SWITCH_BCM539X) += switch-bcm539x.o
-obj-$(CONFIG_UIO_UBICOM32RING) += ring_tio.o
-obj-$(CONFIG_SND_UBI32) += audio.o
-obj-$(CONFIG_UBICOM32_PLIO) += plio.o
-
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/audio.c
- * Generic initialization for Ubicom32 Audio
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/platform_device.h>
-#include <linux/types.h>
-
-#include <asm/devtree.h>
-#include <asm/audio.h>
-#include <asm/ubi32-pcm.h>
-
-/*
- * The number of audio devices currently allocated, used for .id
- */
-static int __initdata audio_device_count;
-
-/*
- * The maximum number of resources (cards) that the audio will have.
- * Currently 3, a register space, and up to 2 interrupts.
- */
-#define AUDIO_MAX_RESOURCES 3
-
-/*
- * audio_device_alloc
- * Checks the device tree and allocates a platform_device if found
- */
-struct platform_device * __init audio_device_alloc(const char *driver_name,
- const char *node_name, const char *inst_name, int priv_bytes)
-{
- struct platform_device *pdev;
- struct resource *res;
- struct audio_node *audio_node;
- struct ubi32pcm_platform_data *pdata;
- struct audio_dev_regs *adr;
- int idx;
-
- /*
- * Check the device tree for the audio node
- */
- audio_node = (struct audio_node *)devtree_find_node(node_name);
- if (!audio_node) {
- printk(KERN_WARNING "audio device '%s' not found\n", node_name);
- return NULL;
- }
-
- if (audio_node->version != AUDIONODE_VERSION) {
- printk(KERN_WARNING "audio node not compatible\n");
- return NULL;
- }
-
- /*
- * Find the instance in this node
- */
- adr = audio_node->regs->adr;
- for (idx = 0; idx < audio_node->regs->max_devs; idx++) {
- if ((adr->version == AUDIO_DEV_REGS_VERSION) &&
- (strcmp(adr->name, inst_name) == 0)) {
- break;
- }
- adr++;
- }
- if (idx == audio_node->regs->max_devs) {
- printk(KERN_WARNING "audio inst '%s' not found in device '%s'\n", inst_name, node_name);
- return NULL;
- }
-
- /*
- * Dynamically create the platform_device structure and resources
- */
- pdev = kzalloc(sizeof(struct platform_device) +
- sizeof(struct ubi32pcm_platform_data) +
- priv_bytes , GFP_KERNEL);
- if (!pdev) {
- printk(KERN_WARNING "audio could not alloc pdev\n");
- return NULL;
- }
-
- res = kzalloc(sizeof(struct resource) * AUDIO_MAX_RESOURCES,
- GFP_KERNEL);
- if (!res) {
- kfree(pdev);
- printk(KERN_WARNING "audio could not alloc res\n");
- return NULL;
- }
-
- pdev->name = driver_name;
- pdev->id = audio_device_count++;
- pdev->resource = res;
-
- /*
- * Fill in the resources and platform data from devtree information
- */
- res[0].start = (u32_t)(audio_node->regs);
- res[0].end = (u32_t)(audio_node->regs);
- res[0].flags = IORESOURCE_MEM;
- res[1 + AUDIO_TX_IRQ_RESOURCE].start = audio_node->dn.sendirq;
- res[1 + AUDIO_TX_IRQ_RESOURCE].flags = IORESOURCE_IRQ;
- res[1 + AUDIO_RX_IRQ_RESOURCE].start = audio_node->dn.recvirq;
- res[1 + AUDIO_RX_IRQ_RESOURCE].flags = IORESOURCE_IRQ;
- pdev->num_resources = 3;
-
- printk(KERN_INFO "Audio.%d '%s':'%s' found irq=%d/%d.%d regs=%p pdev=%p/%p\n",
- pdev->id, node_name, inst_name, audio_node->dn.sendirq,
- audio_node->dn.recvirq, idx, audio_node->regs, pdev, res);
- pdata = (struct ubi32pcm_platform_data *)(pdev + 1);
- pdev->dev.platform_data = pdata;
- pdata->node_name = node_name;
- pdata->inst_name = inst_name;
- pdata->inst_num = idx;
- if (priv_bytes) {
- pdata->priv_data = pdata + 1;
- }
-
- return pdev;
-}
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/board.c
- * Board init and support code.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/cpu.h>
-#include <asm/devtree.h>
-
-struct boardnode {
- struct devtree_node dn;
- const char *revision;
-};
-
-static const struct boardnode *bn;
-
-/*
- * board_get_revision()
- * Returns revision string of the board.
- */
-const char *board_get_revision(void)
-{
- if (!bn) {
- return "NULL";
- }
-
- return bn->revision;
-}
-
-/*
- * board_init
- */
-void __init board_init(void)
-{
- bn = (struct boardnode *)devtree_find_node("board");
- if (!bn) {
- printk(KERN_WARNING "board node not found\n");
- return;
- }
-}
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/bootargs.c
- * Board init and support code.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/cpu.h>
-#include <asm/devtree.h>
-
-struct bootargsnode {
- struct devtree_node dn;
- const char cmdline[512];
-};
-
-static const struct bootargsnode *ban;
-
-/*
- * bootargs_get_cmdline()
- * Returns kernel boot arguments set by the bootloader.
- */
-const char *bootargs_get_cmdline(void)
-{
- if (!ban) {
- return "";
- }
-
- return ban->cmdline;
-}
-
-/*
- * bootargs_init
- */
-void __init bootargs_init(void)
-{
- ban = (struct bootargsnode *)devtree_find_node("bootargs");
- if (!ban) {
- printk(KERN_WARNING "bootargs node not found\n");
- return;
- }
-}
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/cachectl.c
- * Architecture cache control support
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <asm/cachectl.h>
-
-/*
- * The write queue flush procedure in mem_cache_control needs to make
- * DCACHE_WRITE_QUEUE_LENGTH writes to DDR (not OCM). Here we reserve some
- * memory for this operation.
- * Allocate array of cache lines of least DCACHE_WRITE_QUEUE_LENGTH + 1 words in
- * length rounded up to the nearest cache line.
- */
-#define CACHE_WRITE_QUEUE_FLUSH_AREA_SIZE \
- ALIGN(sizeof(int) * (DCACHE_WRITE_QUEUE_LENGTH + 1), CACHE_LINE_SIZE)
-
-static char cache_write_queue_flush_area[CACHE_WRITE_QUEUE_FLUSH_AREA_SIZE]
- __attribute__((aligned(CACHE_LINE_SIZE)));
-
-/*
- * ONE_CCR_ADDR_OP is a helper macro that executes a single CCR operation.
- */
-#define ONE_CCR_ADDR_OP(cc, op_addr, op) \
- do { \
- asm volatile ( \
- " btst "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_VALID)" \n\t" \
- " jmpne.f .-4 \n\t" \
- " move.4 "D(CCR_ADDR)"(%0), %1 \n\t" \
- " move.1 "D(CCR_CTRL+3)"(%0), %2 \n\t" \
- " bset "D(CCR_CTRL)"(%0), "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_VALID)" \n\t" \
- " cycles 2 \n\t" \
- " btst "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_DONE)" \n\t" \
- " jmpeq.f .-4 \n\t" \
- : \
- : "a"(cc), "r"(op_addr), "r"(op & 0xff) \
- : "cc" \
- ); \
- } while (0)
-
-/*
- * mem_cache_control()
- * Special cache control operation
- */
-void mem_cache_control(unsigned long cc, unsigned long begin_addr,
- unsigned long end_addr, unsigned long op)
-{
- unsigned long op_addr;
- int dccr = cc == DCCR_BASE;
- if (dccr && op == CCR_CTRL_FLUSH_ADDR) {
- /*
- * We ensure all previous writes have left the data cache write
- * queue by sending DCACHE_WRITE_QUEUE_LENGTH writes (to
- * different words) down the queue. If this is not done it's
- * possible that the data we are trying to flush hasn't even
- * entered the data cache.
- * The +1 ensure that the final 'flush' is actually a flush.
- */
- int *flush_area = (int *)cache_write_queue_flush_area;
- asm volatile(
- " .rept "D(DCACHE_WRITE_QUEUE_LENGTH + 1)" \n\t"
- " move.4 (%0)4++, d0 \n\t"
- " .endr \n\t"
- : "+a"(flush_area)
- );
- }
-
- if (dccr)
- UBICOM32_LOCK(DCCR_LOCK_BIT);
- else
- UBICOM32_LOCK(ICCR_LOCK_BIT);
-
- /*
- * Calculate the cache lines we need to operate on that include
- * begin_addr though end_addr.
- */
- begin_addr = begin_addr & ~(CACHE_LINE_SIZE - 1);
- end_addr = (end_addr + CACHE_LINE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1);
- op_addr = begin_addr;
-
- do {
- ONE_CCR_ADDR_OP(cc, op_addr, op);
- op_addr += CACHE_LINE_SIZE;
- } while (likely(op_addr < end_addr));
-
- if (dccr && op == CCR_CTRL_FLUSH_ADDR) {
- /*
- * It turns out that when flushing the data cache the last flush
- * isn't actually complete at this point. This is because there
- * is another write buffer on the DDR side of the cache that is
- * arbitrated with the I-Cache.
- *
- * The only foolproof method that ensures that the last data
- * cache flush *actually* completed is to do another flush on a
- * dirty cache line. This flush will block until the DDR write
- * buffer is empty.
- *
- * Rather than creating a another dirty cache line, we use the
- * flush_area above as we know that it is dirty from previous
- * writes.
- */
- ONE_CCR_ADDR_OP(cc, cache_write_queue_flush_area, op);
- }
-
- if (dccr)
- UBICOM32_UNLOCK(DCCR_LOCK_BIT);
- else
- UBICOM32_UNLOCK(ICCR_LOCK_BIT);
-
-}
-EXPORT_SYMBOL(mem_cache_control);
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/common.c
- * Common platform support.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/version.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-
-
-/* Minimum CLK support */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/io.c
- * PCI I/O memory read/write support functions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#ifdef CONFIG_PCI
-unsigned char ioread8(void __iomem *addr)
-{
- if (IS_PCI_ADDRESS(addr))
- return ubi32_pci_read_u8(addr);
- else
- return (unsigned char)(*(volatile unsigned char *)addr);
-}
-EXPORT_SYMBOL(ioread8);
-
-unsigned short ioread16(void __iomem *addr)
-{
- if (IS_PCI_ADDRESS(addr))
- return ubi32_pci_read_u16(addr);
- else
- return (unsigned short)(*(volatile unsigned short *)addr);
-}
-EXPORT_SYMBOL(ioread16);
-
-unsigned int ioread32(void __iomem *addr)
-{
- if (IS_PCI_ADDRESS(addr))
- return ubi32_pci_read_u32(addr);
- else
- return (unsigned int)(*(volatile unsigned int *)addr);
-}
-EXPORT_SYMBOL(ioread32);
-
-void iowrite32(unsigned int val, void __iomem *addr)
-{
- if (IS_PCI_ADDRESS(addr))
- ubi32_pci_write_u32(val, addr);
- else
- *(volatile unsigned int *)addr = val;
-}
-EXPORT_SYMBOL(iowrite32);
-
-void iowrite16(unsigned short val, void __iomem *addr)
-{
- if (IS_PCI_ADDRESS(addr))
- ubi32_pci_write_u16(val, addr);
- else
- *(volatile unsigned short *)addr = val;
-}
-EXPORT_SYMBOL(iowrite16);
-
-void iowrite8(unsigned char val, void __iomem *addr)
-{
- if (IS_PCI_ADDRESS(addr))
- ubi32_pci_write_u8(val, addr);
- else
- *(volatile unsigned char *)addr = val;
-}
-EXPORT_SYMBOL(iowrite8);
-
-void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned len)
-{
- if (IS_PCI_ADDRESS(from)) {
- if ((((u32_t)from & 0x3) == 0) && (((u32_t)to & 0x3) == 0)) {
- while ((int)len >= 4) {
- *(u32_t *)to = ubi32_pci_read_u32(from);
- to += 4;
- from += 4;
- len -= 4;
- }
- } else if ((((u32_t)from & 0x1) == 0) &&
- (((u32_t)to & 0x1) == 0)) {
- while ((int)len >= 2) {
- *(u16_t *)to = ubi32_pci_read_u16(from);
- to += 2;
- from += 2;
- len -= 2;
- }
- }
-
- while (len) {
- *(u8_t *)to = ubi32_pci_read_u8(from);
- to++;
- from++;
- len--;
- }
- } else
- memcpy(to, (void *)from, len);
-}
-EXPORT_SYMBOL(memcpy_fromio);
-
-void memcpy_toio(volatile void __iomem *to, const void *from, unsigned len)
-{
- if (IS_PCI_ADDRESS(to)) {
- if ((((u32_t)from & 0x3) == 0) && (((u32_t)to & 0x3) == 0)) {
- while ((int)len >= 4) {
- ubi32_pci_write_u32(*(u32_t *)from, to);
- to += 4;
- from += 4;
- len -= 4;
- }
- } else if ((((u32_t)from & 0x1) == 0) &&
- (((u32_t)to & 0x1) == 0)) {
- while ((int)len >= 2) {
- ubi32_pci_write_u16(*(u16_t *)from, to);
- to += 2;
- from += 2;
- len -= 2;
- }
- }
-
- while (len) {
- ubi32_pci_write_u8(*(u8_t *)from, to);
- from++;
- to++;
- len--;
- }
- } else
- memcpy((void *)to, from, len);
-
-}
-EXPORT_SYMBOL(memcpy_toio);
-
-void memset_io(volatile void __iomem *addr, int val, size_t len)
-{
- if (IS_PCI_ADDRESS(addr)) {
- while (len) {
- ubi32_pci_write_u8((unsigned char)val, addr);
- addr++;
- len--;
- }
- } else
- memset((void *)addr, val, len);
-
-}
-EXPORT_SYMBOL(memset_io);
-
-void ioread8_rep(void __iomem *port, void *buf, unsigned long count)
-{
- if (IS_PCI_ADDRESS(port)) {
- while (count) {
- *(u8_t *)buf = ioread8(port);
- buf++;
- count--;
- }
- } else {
- insb((unsigned int)port, buf, count);
- }
-
-}
-EXPORT_SYMBOL(ioread8_rep);
-
-void ioread16_rep(void __iomem *port, void *buf, unsigned long count)
-{
- if (IS_PCI_ADDRESS(port)) {
- while (count) {
- *(u16_t *)buf = ioread16(port);
- buf += 2;
- count--;
- }
- } else {
- insw((unsigned int)port, buf, count);
- }
-}
-EXPORT_SYMBOL(ioread16_rep);
-
-void ioread32_rep(void __iomem *port, void *buf, unsigned long count)
-{
- if (IS_PCI_ADDRESS(port)) {
- while (count) {
- *(u32_t *)buf = ioread32(port);
- buf += 4;
- count--;
- }
- } else {
- insl((unsigned int)port, buf, count);
- }
-}
-EXPORT_SYMBOL(ioread32_rep);
-
-void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count)
-{
- if (IS_PCI_ADDRESS(port)) {
- while (count) {
- iowrite8(*(u8_t *)buf, port);
- buf++;
- count--;
- }
- } else {
- outsb((unsigned int)port, buf, count);
- }
-
-}
-EXPORT_SYMBOL(iowrite8_rep);
-
-void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count)
-{
- if (IS_PCI_ADDRESS(port)) {
- while (count) {
- iowrite16(*(u16_t *)buf, port);
- buf += 2;
- count--;
- }
- } else {
- outsw((unsigned int)port, buf, count);
- }
-}
-EXPORT_SYMBOL(iowrite16_rep);
-
-void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count)
-{
- if (IS_PCI_ADDRESS(port)) {
- while (count) {
- iowrite32(*(u32_t *)buf, port);
- buf += 4;
- count--;
- }
- } else {
- outsl((unsigned int)port, buf, count);
- }
-}
-EXPORT_SYMBOL(iowrite32_rep);
-
-#endif /* CONFIG_PCI */
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/pci.c
- * PCI interface management.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
-
-#include <asm/devtree.h>
-#include <asm/ip5000.h>
-#include <asm/ubicom32-common.h>
-
-static int debug_pci = 1 ;
-
-/* #define PCI_USE_INTERNAL_LOCK 1 */
-
-#ifdef PCI_USE_INTERNAL_LOCK
-#define PCI_LOCK(lock, irqflag) pci_lock_acquire(irqflag)
-#define PCI_UNLOCK(lock, irqflag) pci_lock_release(irqflag)
-#elif defined(CONFIG_SMP)
-static DEFINE_SPINLOCK(pci_master_lock);
-#define PCI_LOCK(lock, irqflag) spin_lock_irqsave(lock, irqflag)
-#define PCI_UNLOCK(lock, irqflag) spin_unlock_irqrestore(lock, irqflag)
-#else
-#define PCI_LOCK(lock, irqflag) local_irq_save(irqflag)
-#define PCI_UNLOCK(lock, irqflag) local_irq_restore(irqflag)
-#endif
-
-#define PCI_DEV0_IDSEL CONFIG_PCI_DEV0_IDSEL
-#define PCI_DEV1_IDSEL CONFIG_PCI_DEV1_IDSEL
-
-/*
- * PCI commands
- */
-#define PCI_CMD_INT_ACK 0x00 /* not supported */
-#define PCI_CMD_SPECIAL 0x01 /* not supported */
-#define PCI_CMD_IO_READ 0x02
-#define PCI_CMD_IO_WRITE 0x03
-#define PCI_CMD_MEM_READ 0x06
-#define PCI_CMD_MEM_WRITE 0x07
-#define PCI_CMD_CFG_READ 0x0a
-#define PCI_CMD_CFG_WRITE 0x0b
-#define PCI_CMD_MEM_READ_MULT 0x0c /* not supported */
-#define PCI_CMD_DUAL_ADDR 0x0d /* not supported */
-#define PCI_CMD_MEM_READ_LINE 0x0e /* not supported */
-#define PCI_CMD_MEM_WRITE_INVAL 0x0f /* not supported */
-/*
- * Status codes, returned by pci_read_u32() and pci_write_u32()
- */
-#define PCI_RESP_IN_PROGRESS 0xff /* request still in queue */
-#define PCI_RESP_OK 0
-/*
- * The following codes indicate that the request has completed
- */
-#define PCI_RESP_NO_DEVSEL 1 /* timeout before target asserted
- * DEVSEL! */
-#define PCI_RESP_LOST_DEVSEL 2 /* had DEVSEL, but went away before
- * transfer completed! */
-#define PCI_RESP_BAD_TRDY 3 /* target asserted TRDY without
- * DEVSEL! */
-#define PCI_RESP_NO_TRDY 4 /* timeout before target asserted
- * TRDY! */
-#define PCI_RESP_BAD_STOP 5 /* target asserted STOP and TRDY
- * without DEVSEL! */
-#define PCI_RESP_TARGET_ABORT 6
-#define PCI_RESP_TARGET_RETRY 7
-#define PCI_RESP_TARGET_DISCONNECT 8
-#define PCI_RESP_MISMATCH 9 /* data read back doesn't match data
- * written - debug only, the core PCI
- * routines never return this */
-#define PCI_RESP_DET_SERR 10
-#define PCI_RESP_DET_PERR 11
-#define PCI_RESP_MALFORMED_REQ 12 /* Could be due to misaligned
- * requests or invalid address */
-#define PCI_RESP_NO_RESOURCE 13 /* Could be memory or other resourse
- * like queue space */
-#define PCI_RESP_ERROR 14 /* All emcompassing error */
-
-/* registers in PCI config space */
-#define PCI_DEVICE_VENDOR_ID_REG 0x00
-#define PCI_STATUS_COMMAND_REG 0x04
-#define PCI_CLASS_REVISION_REG 0x08
-#define PCI_BHLC_REG 0x0c /* BIST, Header type, Latency
- * timer, Cache line size */
-#define PCI_BASE_ADDR_REG 0x10
-#define PCI_BASE_REG_COUNT 6
-#define CARDBUS_CIS_PTR_REG 0x28
-#define PCI_SUB_SYSTEM_ID_REG 0x2c
-#define PCI_EXP_ROM_ADDR_REG 0x30
-#define PCI_CAP_PTR_REG 0x34
-#define PCI_LGPL_REG 0x3C /* max Latency, min Gnt, interrupt
- * Pin, interrupt Line */
-
-struct pci_master_request {
- volatile u32_t pci_address; /* must be 4-byte aligned */
- volatile u32_t data; /* must be 4-byte aligned */
- volatile u8_t cmd;
- volatile u8_t byte_valid;
- volatile u8_t status;
-};
-
-struct pci_devnode {
- struct devtree_node dn;
- u32_t pci_idsel_0;
- u32_t pci_idsel_1;
- u32_t pci_cpu_address;
- struct pci_master_request volatile *volatile req;
-};
-
-static struct pci_master_request req; /* globally used for faster master write
- * (discarding result when possible) */
-static struct pci_devnode *pci_node;
-
-#if !defined(CONFIG_DEBUG_PCIMEASURE)
-#define PCI_DECLARE_MEASUREMENT
-#define PCI_MEASUREMENT_START()
-#define PCI_MEASUREMENT_END(idx)
-#else
-#define PCI_DECLARE_MEASUREMENT \
- int __diff; \
- unsigned int __tstart;
-
-#define PCI_MEASUREMENT_START() \
- __tstart = UBICOM32_IO_TIMER->sysval;
-
-#define PCI_MEASUREMENT_END(idx) \
- __diff = (int)UBICOM32_IO_TIMER->sysval - (int)__tstart; \
- pci_measurement_update((idx), __diff);
-
-#define PCI_WEIGHT 32
-
-struct pci_measurement {
- volatile unsigned int min;
- volatile unsigned int avg;
- volatile unsigned int max;
-};
-
-enum pci_measurement_list {
- PCI_MEASUREMENT_READ32,
- PCI_MEASUREMENT_WRITE32,
- PCI_MEASUREMENT_READ16,
- PCI_MEASUREMENT_WRITE16,
- PCI_MEASUREMENT_READ8,
- PCI_MEASUREMENT_WRITE8,
- PCI_MEASUREMENT_LAST,
-};
-
-static const char *pci_measurement_name_list[PCI_MEASUREMENT_LAST] = {
- "READ32",
- "WRITE32",
- "READ16",
- "WRITE16",
- "READ8",
- "WRITE8"
-};
-static struct pci_measurement pci_measurements[PCI_MEASUREMENT_LAST];
-
-/*
- * pci_measurement_update()
- * Update an entry in the measurement array for this idx.
- */
-static void pci_measurement_update(int idx, int sample)
-{
- struct pci_measurement *pm = &pci_measurements[idx];
- if ((pm->min == 0) || (pm->min > sample)) {
- pm->min = sample;
- }
- if (pm->max < sample) {
- pm->max = sample;
- }
- pm->avg = ((pm->avg * (PCI_WEIGHT - 1)) + sample) / PCI_WEIGHT;
-}
-#endif
-
-#if defined(PCI_USE_INTERNAL_LOCK)
-/*
- * pci_lock_release()
- * Release the PCI lock.
- */
-static void pci_lock_release(unsigned long irqflag)
-{
- UBICOM32_UNLOCK(PCI_LOCK_BIT);
-}
-
-/*
- * pci_lock_acquire()
- * Acquire the PCI lock, spin if not available.
- */
-static void pci_lock_acquire(unsigned long irqflag)
-{
- UBICOM32_LOCK(PCI_LOCK_BIT);
-}
-#endif
-
-/*
- * pci_set_hrt_interrupt()
- */
-static inline void pci_set_hrt_interrupt(struct pci_devnode *pci_node)
-{
- ubicom32_set_interrupt(pci_node->dn.sendirq);
-}
-
-/*
- * pci_read_u32()
- * Synchronously read 32 bits from PCI space.
- */
-u8 pci_read_u32(u8 pci_cmd, u32 address, u32 *data)
-{
- u8 status;
- unsigned long irqflag;
-
-
- /*
- * Fill in the request.
- */
- volatile struct pci_master_request lreq;
- PCI_DECLARE_MEASUREMENT;
-
- lreq.pci_address = address;
- lreq.cmd = pci_cmd;
- lreq.byte_valid = 0xf; /* enable all bytes */
-
- /*
- * Wait for any previous request to complete and then make this request.
- */
- PCI_MEASUREMENT_START();
- PCI_LOCK(&pci_master_lock, irqflag);
- while (unlikely(pci_node->req == &req))
- ;
- pci_node->req = &lreq;
- pci_set_hrt_interrupt(pci_node);
- PCI_UNLOCK(&pci_master_lock, irqflag);
-
- /*
- * Wait for the result to show up.
- */
- while (unlikely(pci_node->req == &lreq))
- ;
- status = lreq.status;
- if (likely(status == PCI_RESP_OK))
- *data = le32_to_cpu(lreq.data);
- else
- *data = 0;
- PCI_MEASUREMENT_END(PCI_MEASUREMENT_READ32);
- return status;
-}
-
-/*
- * pci_write_u32()
- * Asyncrhnously or synchronously write 32 bits to PCI master space.
- */
-u8 pci_write_u32(u8 pci_cmd, u32 address, u32 data)
-{
- unsigned long irqflag;
- PCI_DECLARE_MEASUREMENT;
-
- /*
- * Wait for any previous write or pending read to complete.
- *
- * We use a global data block because once we write the request
- * we do not wait for it to complete before exiting.
- */
- PCI_MEASUREMENT_START();
- PCI_LOCK(&pci_master_lock, irqflag);
- while (unlikely(pci_node->req == &req))
- ;
- req.pci_address = address;
- req.data = cpu_to_le32(data);
- req.cmd = pci_cmd;
- req.byte_valid = 0xf; /* enable all bytes */
- pci_node->req = &req;
- pci_set_hrt_interrupt(pci_node);
- PCI_UNLOCK(&pci_master_lock, irqflag);
- PCI_MEASUREMENT_END(PCI_MEASUREMENT_WRITE32);
- return PCI_RESP_OK;
-}
-
-/*
- * pci_read_u16()
- * Synchronously read 16 bits from PCI space.
- */
-u8 pci_read_u16(u8 pci_cmd, u32 address, u16 *data)
-{
- u8 status;
- unsigned long irqflag;
-
- /*
- * Fill in the request.
- */
- volatile struct pci_master_request lreq;
- PCI_DECLARE_MEASUREMENT;
-
- lreq.pci_address = address & ~2;
- lreq.cmd = pci_cmd;
- lreq.byte_valid = (address & 2) ? 0xc : 0x3;
-
- /*
- * Wait for any previous request to complete and then make this request.
- */
- PCI_MEASUREMENT_START();
- PCI_LOCK(&pci_master_lock, irqflag);
- while (unlikely(pci_node->req == &req))
- ;
- pci_node->req = &lreq;
- pci_set_hrt_interrupt(pci_node);
- PCI_UNLOCK(&pci_master_lock, irqflag);
-
- /*
- * Wait for the result to show up.
- */
- while (unlikely(pci_node->req == &lreq))
- ;
- status = lreq.status;
- if (likely(status == PCI_RESP_OK)) {
- lreq.data = le32_to_cpu(lreq.data);
- *data = (u16)((address & 2) ? (lreq.data >> 16) : lreq.data);
- } else
- *data = 0;
- PCI_MEASUREMENT_END(PCI_MEASUREMENT_READ16);
- return status;
-}
-
-/*
- * pci_write_u16()
- * Asyncrhnously or synchronously write 16 bits to PCI master space.
- */
-u8 pci_write_u16(u8 pci_cmd, u32 address, u16 data)
-{
- unsigned long irqflag;
- PCI_DECLARE_MEASUREMENT;
-
- /*
- * Wait for any previous write or pending read to complete.
- *
- * We use a global data block because once we write the request
- * we do not wait for it to complete before exiting.
- */
- PCI_MEASUREMENT_START();
- PCI_LOCK(&pci_master_lock, irqflag);
- while (unlikely(pci_node->req == &req))
- ;
- req.pci_address = address & ~2;
- req.data = (u32)data;
- req.data = cpu_to_le32((address & 2) ? (req.data << 16) : req.data);
- req.cmd = pci_cmd;
- req.byte_valid = (address & 2) ? 0xc : 0x3;
- pci_node->req = &req;
- pci_set_hrt_interrupt(pci_node);
- PCI_UNLOCK(&pci_master_lock, irqflag);
- PCI_MEASUREMENT_END(PCI_MEASUREMENT_WRITE16);
- return PCI_RESP_OK;
-}
-
-/*
- * pci_read_u8()
- * Synchronously read 8 bits from PCI space.
- */
-u8 pci_read_u8(u8 pci_cmd, u32 address, u8 *data)
-{
- u8 status;
- unsigned long irqflag;
-
- /*
- * Fill in the request.
- */
- volatile struct pci_master_request lreq;
- PCI_DECLARE_MEASUREMENT;
-
- lreq.pci_address = address & ~3;
- lreq.cmd = pci_cmd;
- lreq.byte_valid = 1 << (address & 0x3);
-
- /*
- * Wait for any previous request to complete and then make this request.
- */
- PCI_MEASUREMENT_START();
- PCI_LOCK(&pci_master_lock, irqflag);
- while (unlikely(pci_node->req == &req))
- ;
- pci_node->req = &lreq;
- pci_set_hrt_interrupt(pci_node);
- PCI_UNLOCK(&pci_master_lock, irqflag);
-
- /*
- * Wait for the result to show up.
- */
- while (unlikely(pci_node->req == &lreq))
- ;
- status = lreq.status;
- if (likely(status == PCI_RESP_OK)) {
- *data = (u8)(lreq.data >> (24 - ((address & 0x3) << 3)));
- } else
- *data = 0;
- PCI_MEASUREMENT_END(PCI_MEASUREMENT_READ8);
- return status;
-}
-
-/*
- * pci_write_u8()
- * Asyncrhnously or synchronously write 8 bits to PCI master space.
- */
-u8 pci_write_u8(u8 pci_cmd, u32 address, u8 data)
-{
- unsigned long irqflag;
- PCI_DECLARE_MEASUREMENT;
-
- /*
- * Wait for any previous write or pending read to complete.
- *
- * We use a global data block because once we write the request
- * we do not wait for it to complete before exiting.
- */
- PCI_MEASUREMENT_START();
- PCI_LOCK(&pci_master_lock, irqflag);
- while (unlikely(pci_node->req == &req))
- ;
- req.pci_address = address & ~3;
- req.data = ((u32)data << (24 - ((address & 0x3) << 3)));
- req.cmd = pci_cmd;
- req.byte_valid = 1 << (address & 0x3);
- pci_node->req = &req;
- pci_set_hrt_interrupt(pci_node);
- PCI_UNLOCK(&pci_master_lock, irqflag);
- PCI_MEASUREMENT_END(PCI_MEASUREMENT_WRITE8);
- return PCI_RESP_OK;
-}
-
-unsigned int ubi32_pci_read_u32(const volatile void __iomem *addr)
-{
- unsigned int data;
- pci_read_u32(PCI_CMD_MEM_READ, (u32)addr, &data);
- return data;
-}
-EXPORT_SYMBOL(ubi32_pci_read_u32);
-
-unsigned short ubi32_pci_read_u16(const volatile void __iomem *addr)
-{
- unsigned short data;
- pci_read_u16(PCI_CMD_MEM_READ, (u32)addr, &data);
- return data;
-}
-EXPORT_SYMBOL(ubi32_pci_read_u16);
-
-unsigned char ubi32_pci_read_u8(const volatile void __iomem *addr)
-{
- unsigned char data;
- pci_read_u8(PCI_CMD_MEM_READ, (u32)addr, &data);
- return data;
-}
-EXPORT_SYMBOL(ubi32_pci_read_u8);
-
-void ubi32_pci_write_u32(unsigned int val, const volatile void __iomem *addr)
-{
- pci_write_u32(PCI_CMD_MEM_WRITE, (u32)addr, val);
-}
-EXPORT_SYMBOL(ubi32_pci_write_u32);
-
-void ubi32_pci_write_u16(unsigned short val, const volatile void __iomem *addr)
-{
- pci_write_u16(PCI_CMD_MEM_WRITE, (u32)addr, val);
-}
-EXPORT_SYMBOL(ubi32_pci_write_u16);
-
-void ubi32_pci_write_u8(unsigned char val, const void volatile __iomem *addr)
-{
- pci_write_u8(PCI_CMD_MEM_WRITE, (u32)addr, val);
-}
-EXPORT_SYMBOL(ubi32_pci_write_u8);
-
-#if defined(CONFIG_DEBUG_PCIMEASURE)
-static unsigned int pci_cycles_to_nano(unsigned int cycles, unsigned int frequency)
-{
- unsigned int nano = ((cycles * 1000) / (frequency / 1000000));
- return nano;
-}
-
-/*
- * pci_measurement_show()
- * Print out the min, avg, max values for each PCI transaction type.
- *
- * By request, the max value is reset after each dump.
- */
-static int pci_measurement_show(struct seq_file *p, void *v)
-{
- unsigned int min, avg, max;
- unsigned int freq = processor_frequency();
- int trans = *((loff_t *) v);
-
- if (trans == 0) {
- seq_puts(p, "min\tavg\tmax\t(nano-seconds)\n");
- }
-
- if (trans >= PCI_MEASUREMENT_LAST) {
- return 0;
- }
-
- min = pci_cycles_to_nano(pci_measurements[trans].min, freq);
- avg = pci_cycles_to_nano(pci_measurements[trans].avg, freq);
- max = pci_cycles_to_nano(pci_measurements[trans].max, freq);
- pci_measurements[trans].max = 0;
- seq_printf(p, "%u\t%u\t%u\t%s\n", min, avg, max, pci_measurement_name_list[trans]);
- return 0;
-}
-
-static void *pci_measurement_start(struct seq_file *f, loff_t *pos)
-{
- return (*pos < PCI_MEASUREMENT_LAST) ? pos : NULL;
-}
-
-static void *pci_measurement_next(struct seq_file *f, void *v, loff_t *pos)
-{
- (*pos)++;
- if (*pos >= PCI_MEASUREMENT_LAST)
- return NULL;
- return pos;
-}
-
-static void pci_measurement_stop(struct seq_file *f, void *v)
-{
- /* Nothing to do */
-}
-
-static const struct seq_operations pci_measurement_seq_ops = {
- .start = pci_measurement_start,
- .next = pci_measurement_next,
- .stop = pci_measurement_stop,
- .show = pci_measurement_show,
-};
-
-static int pci_measurement_open(struct inode *inode, struct file *filp)
-{
- return seq_open(filp, &pci_measurement_seq_ops);
-}
-
-static const struct file_operations pci_measurement_fops = {
- .open = pci_measurement_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-static int __init pci_measurement_init(void)
-{
- proc_create("pci_measurements", 0, NULL, &pci_measurement_fops);
- return 0;
-}
-module_init(pci_measurement_init);
-#endif
-
-static int ubi32_pci_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *value)
-{
- u8 cmd;
- u32 addr;
- u8 data8;
- u16 data16;
-
- u8 slot = PCI_SLOT(devfn);
- u8 fn = PCI_FUNC(devfn);
-
- if (slot > 1) {
- return PCIBIOS_DEVICE_NOT_FOUND;
- } else if (slot == 0) {
- addr = PCI_DEV0_IDSEL + where;
- } else {
- addr = PCI_DEV1_IDSEL + where;
- }
-
- addr += (fn << 8);
-
- cmd = PCI_CMD_CFG_READ;
- if (size == 1) {
- pci_read_u8(cmd, addr, &data8);
- *value = (u32)data8;
- } else if (size == 2) {
- pci_read_u16(cmd, addr, &data16);
- *value = (u32)data16;
- } else {
- pci_read_u32(cmd, addr, value);
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int ubi32_pci_write_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 value)
-{
- u8 cmd;
- u32 addr;
- u8 slot = PCI_SLOT(devfn);
- u8 fn = PCI_FUNC(devfn);
-
- if (slot > 1) {
- return PCIBIOS_DEVICE_NOT_FOUND;
- } else if (slot == 0) {
- addr = PCI_DEV0_IDSEL + where;
- } else {
- addr = PCI_DEV1_IDSEL + where;
- }
-
- addr += (fn << 8);
-
- cmd = PCI_CMD_CFG_WRITE;
- if (size == 1) {
- pci_write_u8(cmd, addr, (u8)value);
- } else if (size == 2) {
- pci_write_u16(cmd, addr, (u16)value);
- } else {
- pci_write_u32(cmd, addr, value);
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
-{
- return -EIO;
-}
-EXPORT_SYMBOL(pci_set_dma_max_seg_size);
-
-int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask)
-{
- return -EIO;
-}
-EXPORT_SYMBOL(pci_set_dma_seg_boundary);
-
-void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
-{
- resource_size_t start = pci_resource_start(dev, bar);
- resource_size_t len = pci_resource_len(dev, bar);
- unsigned long flags = pci_resource_flags(dev, bar);
-
- if (!len || !start) {
- return NULL;
- }
-
- if (maxlen && len > maxlen) {
- len = maxlen;
- }
-
- if (flags & IORESOURCE_IO) {
- return ioport_map(start, len);
- }
-
- if (flags & IORESOURCE_MEM) {
- if (flags & IORESOURCE_CACHEABLE) {
- return ioremap(start, len);
- }
- return ioremap_nocache(start, len);
- }
- return NULL;
-}
-EXPORT_SYMBOL(pci_iomap);
-
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
-{
- if ((unsigned long)addr >= VMALLOC_START &&
- (unsigned long)addr < VMALLOC_END) {
- iounmap(addr);
- }
-}
-EXPORT_SYMBOL(pci_iounmap);
-
-/*
- * From arch/arm/kernel/bios32.c
- *
- * PCI bios-type initialisation for PCI machines
- *
- * Bits taken from various places.
- */
-static void __init pcibios_init_hw(struct hw_pci *hw)
-{
- struct pci_sys_data *sys = NULL;
- int ret;
- int nr, busnr;
-
- for (nr = busnr = 0; nr < hw->nr_controllers; nr++) {
- sys = kzalloc(sizeof(struct pci_sys_data), GFP_KERNEL);
- if (!sys)
- panic("PCI: unable to allocate sys data!");
-
- sys->hw = hw;
- sys->busnr = busnr;
- sys->map_irq = hw->map_irq;
- sys->resource[0] = &ioport_resource;
- sys->resource[1] = &iomem_resource;
-
- ret = hw->setup(nr, sys);
-
- if (ret > 0) {
- sys->bus = hw->scan(nr, sys);
-
- if (!sys->bus)
- panic("PCI: unable to scan bus!");
-
- busnr = sys->bus->subordinate + 1;
-
- list_add(&sys->node, &hw->buses);
- } else {
- kfree(sys);
- if (ret < 0)
- break;
- }
- }
-}
-
-/*
- * Swizzle the device pin each time we cross a bridge.
- * This might update pin and returns the slot number.
- */
-static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin)
-{
- struct pci_sys_data *sys = dev->sysdata;
- int slot = 0, oldpin = *pin;
-
- if (sys->swizzle)
- slot = sys->swizzle(dev, pin);
-
- if (debug_pci)
- printk("PCI: %s swizzling pin %d => pin %d slot %d\n",
- pci_name(dev), oldpin, *pin, slot);
- return slot;
-}
-
-/*
- * Map a slot/pin to an IRQ.
- */
-static int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- struct pci_sys_data *sys = dev->sysdata;
- int irq = -1;
-
- if (sys->map_irq)
- irq = sys->map_irq(dev, slot, pin);
-
- if (debug_pci)
- printk("PCI: %s mapping slot %d pin %d => irq %d\n",
- pci_name(dev), slot, pin, irq);
-
- return irq;
-}
-
-void __init pci_common_init(struct hw_pci *hw)
-{
- struct pci_sys_data *sys;
-
- INIT_LIST_HEAD(&hw->buses);
-
- if (hw->preinit)
- hw->preinit();
- pcibios_init_hw(hw);
- if (hw->postinit)
- hw->postinit();
-
- pci_fixup_irqs(pcibios_swizzle, pcibios_map_irq);
- list_for_each_entry(sys, &hw->buses, node) {
- struct pci_bus *bus = sys->bus;
- /*
- * Size the bridge windows.
- */
- pci_bus_size_bridges(bus);
- /*
- * Assign resources.
- */
- pci_bus_assign_resources(bus);
-
- /*
- * Tell drivers about devices found.
- */
- pci_bus_add_devices(bus);
- }
-}
-
-char * __init pcibios_setup(char *str)
-{
- if (!strcmp(str, "debug")) {
- debug_pci = 1;
- return NULL;
- }
- return str;
-}
-
-/*
- * From arch/i386/kernel/pci-i386.c:
- *
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might be mirrored at 0x0100-0x03ff..
- */
-void pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size, resource_size_t align)
-{
- resource_size_t start = res->start;
-
- if (res->flags & IORESOURCE_IO && start & 0x300)
- start = (start + 0x3ff) & ~0x3ff;
-
- res->start = (start + align - 1) & ~(align - 1);
-}
-
-
-void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
-{
- if (debug_pci)
- printk("PCI: Assigning IRQ %02d to %s\n", irq, pci_name(dev));
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
-/*
- * If the bus contains any of these devices, then we must not turn on
- * parity checking of any kind. Currently this is CyberPro 20x0 only.
- */
-static inline int pdev_bad_for_parity(struct pci_dev *dev)
-{
- return (dev->vendor == PCI_VENDOR_ID_INTERG &&
- (dev->device == PCI_DEVICE_ID_INTERG_2000 ||
- dev->device == PCI_DEVICE_ID_INTERG_2010)) ||
- (dev->vendor == PCI_VENDOR_ID_ITE &&
- dev->device == PCI_DEVICE_ID_ITE_8152);
-
-}
-
-/*
- * Adjust the device resources from bus-centric to Linux-centric.
- */
-static void __devinit
-pdev_fixup_device_resources(struct pci_sys_data *root, struct pci_dev *dev)
-{
- resource_size_t offset;
- int i;
-
- for (i = 0; i < PCI_NUM_RESOURCES; i++) {
- if (dev->resource[i].start == 0)
- continue;
- if (dev->resource[i].flags & IORESOURCE_MEM)
- offset = root->mem_offset;
- else
- offset = root->io_offset;
-
- dev->resource[i].start += offset;
- dev->resource[i].end += offset;
- }
-}
-
-static void __devinit
-pbus_assign_bus_resources(struct pci_bus *bus, struct pci_sys_data *root)
-{
- struct pci_dev *dev = bus->self;
- int i;
-
- if (!dev) {
- /*
- * Assign root bus resources.
- */
- for (i = 0; i < 3; i++)
- bus->resource[i] = root->resource[i];
- }
-}
-
-/*
- * pcibios_fixup_bus - Called after each bus is probed,
- * but before its children are examined.
- */
-void pcibios_fixup_bus(struct pci_bus *bus)
-{
- struct pci_sys_data *root = bus->sysdata;
- struct pci_dev *dev;
- u16 features = PCI_COMMAND_SERR | PCI_COMMAND_PARITY |
- PCI_COMMAND_FAST_BACK;
-
- pbus_assign_bus_resources(bus, root);
-
- /*
- * Walk the devices on this bus, working out what we can
- * and can't support.
- */
- list_for_each_entry(dev, &bus->devices, bus_list) {
- u16 status;
-
- pdev_fixup_device_resources(root, dev);
-
- pci_read_config_word(dev, PCI_STATUS, &status);
-
- /*
- * If any device on this bus does not support fast back
- * to back transfers, then the bus as a whole is not able
- * to support them. Having fast back to back transfers
- * on saves us one PCI cycle per transaction.
- */
- if (!(status & PCI_STATUS_FAST_BACK))
- features &= ~PCI_COMMAND_FAST_BACK;
-
- if (pdev_bad_for_parity(dev))
- features &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
-
- switch (dev->class >> 8) {
- case PCI_CLASS_BRIDGE_PCI:
- pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
- status |= PCI_BRIDGE_CTL_PARITY |
- PCI_BRIDGE_CTL_MASTER_ABORT;
- status &= ~(PCI_BRIDGE_CTL_BUS_RESET |
- PCI_BRIDGE_CTL_FAST_BACK);
- pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status);
- break;
-
- case PCI_CLASS_BRIDGE_CARDBUS:
- pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL,
- &status);
- status |= PCI_CB_BRIDGE_CTL_PARITY |
- PCI_CB_BRIDGE_CTL_MASTER_ABORT;
- pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL,
- status);
- break;
- }
- }
-
- /*
- * Now walk the devices again, this time setting them up.
- */
- list_for_each_entry(dev, &bus->devices, bus_list) {
- u16 cmd;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd |= features;
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
- L1_CACHE_BYTES >> 2);
- }
-
- /*
- * Propagate the flags to the PCI bridge.
- */
- if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- if (features & PCI_COMMAND_FAST_BACK)
- bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK;
- if (features & PCI_COMMAND_PARITY)
- bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY;
- }
-
- /*
- * Report what we did for this bus
- */
- printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
- bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
-}
-/*
- * Convert from Linux-centric to bus-centric addresses for bridge devices.
- */
-void
-pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
- struct resource *res)
-{
- struct pci_sys_data *root = dev->sysdata;
- unsigned long offset = 0;
-
- if (res->flags & IORESOURCE_IO)
- offset = root->io_offset;
- if (res->flags & IORESOURCE_MEM)
- offset = root->mem_offset;
-
- region->start = res->start - offset;
- region->end = res->end - offset;
-}
-
-void __devinit
-pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
- struct pci_bus_region *region)
-{
- struct pci_sys_data *root = dev->sysdata;
- unsigned long offset = 0;
-
- if (res->flags & IORESOURCE_IO)
- offset = root->io_offset;
- if (res->flags & IORESOURCE_MEM)
- offset = root->mem_offset;
-
- res->start = region->start + offset;
- res->end = region->end + offset;
-}
-
-#ifdef CONFIG_HOTPLUG
-EXPORT_SYMBOL(pcibios_fixup_bus);
-EXPORT_SYMBOL(pcibios_resource_to_bus);
-EXPORT_SYMBOL(pcibios_bus_to_resource);
-#endif
-
-/**
- * pcibios_enable_device - Enable I/O and memory.
- * @dev: PCI device to be enabled
- */
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
- u16 cmd, old_cmd;
- int idx;
- struct resource *r;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
- for (idx = 0; idx < 6; idx++) {
- /* Only set up the requested stuff */
- if (!(mask & (1 << idx)))
- continue;
-
- r = dev->resource + idx;
- if (!r->start && r->end) {
- printk(KERN_ERR "PCI: Device %s not available because"
- " of resource collisions\n", pci_name(dev));
- return -EINVAL;
- }
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
-
- /*
- * Bridges (eg, cardbus bridges) need to be fully enabled
- */
- if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
- cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-
- if (cmd != old_cmd) {
- printk("PCI: enabling device %s (%04x -> %04x)\n",
- pci_name(dev), old_cmd, cmd);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
- return 0;
-}
-
-
-struct pci_ops ubi32_pci_ops = {
- .read = ubi32_pci_read_config,
- .write = ubi32_pci_write_config,
-};
-
-static struct pci_bus *ubi32_pci_scan_bus(int nr, struct pci_sys_data *sys)
-{
- return pci_scan_bus(sys->busnr, &ubi32_pci_ops, sys);
-}
-
-#define UBI32_PCI_MEM_BASE PCI_DEV_REG_BASE
-#define UBI32_PCI_MEM_LEN 0x80000000
-
-#define UBI32_PCI_IO_BASE 0x0
-#define UBI32_PCI_IO_END 0x0
-
-static struct resource ubi32_pci_mem = {
- .name = "PCI memory space",
- .start = UBI32_PCI_MEM_BASE,
- .end = UBI32_PCI_MEM_BASE + UBI32_PCI_MEM_LEN - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct resource ubi32_pci_io = {
- .name = "PCI IO space",
- .start = UBI32_PCI_IO_BASE,
- .end = UBI32_PCI_IO_END,
- .flags = IORESOURCE_IO,
-};
-
-static int __init ubi32_pci_setup(int nr, struct pci_sys_data *sys)
-{
- if (nr > 0)
- return 0;
-
- request_resource(&iomem_resource, &ubi32_pci_mem);
- request_resource(&ioport_resource, &ubi32_pci_io);
-
- sys->resource[0] = &ubi32_pci_io;
- sys->resource[1] = &ubi32_pci_mem;
- sys->resource[2] = NULL;
-
- return 1;
-}
-
-static void __init ubi32_pci_preinit(void)
-{
-}
-
-static int __init ubi32_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- return pci_node->dn.recvirq;
-}
-
-struct hw_pci ubi32_pci __initdata = {
- .nr_controllers = 1,
- .preinit = ubi32_pci_preinit,
- .setup = ubi32_pci_setup,
- .scan = ubi32_pci_scan_bus,
- .map_irq = ubi32_pci_map_irq,
-};
-
-static int __init ubi32_pci_init(void)
-{
- pci_node = (struct pci_devnode *)devtree_find_node("pci");
- if (pci_node == NULL) {
- printk(KERN_WARNING "PCI init failed\n");
- return -ENOSYS;
- }
- pci_common_init(&ubi32_pci);
- return 0;
-}
-
-subsys_initcall(ubi32_pci_init);
-
-/*
- * workaround for dual PCI card interrupt
- */
-#define PCI_COMMON_INT_BIT (1 << 19)
-void ubi32_pci_int_wr(void)
-{
- volatile unsigned int pci_int_line;
- pci_int_line = UBICOM32_IO_PORT(RB)->gpio_in;
- if (!(pci_int_line & PCI_COMMON_INT_BIT))
- {
- ubicom32_set_interrupt(pci_node->dn.recvirq);
- }
-}
-EXPORT_SYMBOL(ubi32_pci_int_wr);
+++ /dev/null
-/*
- * plio.c
- * PLIO state machine support functions
- *
- * Copyright © 2009 Ubicom Inc. <www.ubicom.com>. All rights reserved.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can
- * redistribute it and/or modify it under the terms of the GNU General
- * Public License as published by the Free Software Foundation, either
- * version 2 of the License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <asm/plio.h>
-
-/*
- * plio_reset
- * Select and reset PLIO function
- */
-static void plio_reset(const plio_fctl_t *plio_fctl) {
- plio_io_function_t plio_function = {
- .fn_sel = PLIO_FN,
- .fn_reset = 1,
- };
-
- /*
- * enable extension port
- */
- PEXT_NBR->function = plio_function;
-
- /*
- * program clock dividers
- */
- PLIO_NBR->fctl2 = plio_fctl->fctl2;
-
- /*
- * select plio function and assert function reset
- */
- plio_function.br_thread = thread_get_self();
- plio_function.fn_reset = 1;
- PLIO_NBR->function = plio_function;
-
- /*
- * program plio controls
- */
- PLIO_NBR->fctl0 = plio_fctl->fctl0;
- PLIO_NBR->fctl1 = plio_fctl->fctl1;
-
- /*
- * deassert function reset
- */
- plio_function.fn_reset = 0;
- PLIO_NBR->function = plio_function;
-}
-
-/*
- * plio_init
- * configure and initialize PLIO.
- */
-void plio_init(const plio_fctl_t *plio_fctl, const plio_config_t *plio_config, const plio_sram_t plio_sram_cfg[], int sram_cfg_size){
- /*
- * first reset to start plio clock
- */
- plio_reset(plio_fctl);
-
- udelay(1);
-
- /*
- * configure pfsm
- */
- PLIO_NBR->fctl0.pfsm_prog = 1;
- memcpy(PLIO_BR->pfsm_sram, plio_sram_cfg, sram_cfg_size);
- PLIO_NBR->fctl0.pfsm_prog = 0;
-
- /*
- * program rest of plio
- */
- memcpy(&PLIO_BR->config, plio_config, sizeof(plio_config_t));
-}
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/profile.c
- * Implementation for Ubicom32 Profiler
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/platform_device.h>
-#include "profile.h"
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
-#include <linux/mm.h>
-#include <linux/mmzone.h>
-#include <linux/fs.h>
-#include <linux/page-flags.h>
-#include <asm/uaccess.h>
-#include <asm/devtree.h>
-#include <asm/profilesample.h>
-#include <asm/memory_map.h>
-#include <asm/page.h>
-#include <asm/ip5000.h>
-
-/*
- * spacs for all memory blocks so we can hold locks for short time when walking tables
- */
-#define PROFILE_NUM_MAPS 5000
-static struct profile_map profile_pm[PROFILE_NUM_MAPS];
-
-static struct profilenode *node = NULL;
-static int profile_first_packet = 1;
-
-static int profile_open(struct inode *inode, struct file *filp)
-{
- if (!node) {
- return -ENOENT;
- }
- node->busy = 1;
- if (!node->enabled) {
- node->enabled = 1;
- node->busy = 0;
- profile_first_packet = 1;
- return 0;
- }
- node->busy = 0;
- return -EBUSY;
-}
-
-static int profile_sequence_num;
-
-/*
- * make a packet full of sample data
- */
-static int profile_make_data_packet(char *buf, int count)
-{
- int samples; /* number of samples requested */
- int i;
- struct profile_header ph;
- char *ptr;
-
- if (count < sizeof(struct profile_header) + sizeof(struct profile_sample)) {
- return -EINVAL;
- }
-
- /*
- * fill in the packet header
- */
- memset(&ph, 0, sizeof(struct profile_header));
- ph.magic = PROF_MAGIC + PROFILE_VERSION;
- ph.header_size = sizeof(struct profile_header);
- ph.clocks = node->clocks;
- for (i = 0; i < PROFILE_MAX_THREADS; ++i) {
- ph.instruction_count[i] = node->inst_count[i];
- }
- ph.profile_instructions = 0;
- ph.enabled = node->enabled_threads;
- ph.hrt = node->hrt;
- ph.high = 0;
- ph.profiler_thread = node->profiler_thread;
- ph.clock_freq = node->clock_freq;
- ph.seq_num = profile_sequence_num++;
- ph.cpu_id = node->cpu_id;
- ph.perf_counters[0] = node->stats[0];
- ph.perf_counters[1] = node->stats[1];
- ph.perf_counters[2] = node->stats[2];
- ph.perf_counters[3] = node->stats[3];
- ph.ddr_freq = node->ddr_freq;
-
- ptr = buf + sizeof(struct profile_header);
-
- samples = (count - sizeof(struct profile_header)) / sizeof(struct profile_sample);
- for (i = 0; i < samples && node->count; ++i) {
- if (copy_to_user(ptr, &node->samples[node->tail], sizeof(struct profile_sample)) != 0) {
- return -EFAULT;
- }
- node->count--;
- node->tail++;
- if (node->tail >= node->max_samples) {
- node->tail = 0;
- }
- ptr += sizeof(struct profile_sample);
- }
- ph.sample_count = i;
- if (copy_to_user(buf, &ph, sizeof(struct profile_header)) != 0) {
- return -EFAULT;
- }
- if (ph.sample_count == 0)
- return 0;
- else
- return sizeof(struct profile_header) + ph.sample_count * sizeof(struct profile_sample);
-}
-
-static void profile_get_memory_stats(unsigned int *total_free, unsigned int *max_free)
-{
- struct list_head *p;
- struct zone *zone;
- unsigned int size;
-
- *total_free = 0;
- *max_free = 0;
-
- /*
- * get all the free regions. In each zone, the array of free_area lists contains the first page of each frame of size 1 << order
- */
- for_each_zone(zone) {
- unsigned long order, flags, i;
-
- if (!populated_zone(zone))
- continue;
-
- if (!is_normal(zone))
- continue;
-
- spin_lock_irqsave(&zone->lock, flags);
- for_each_migratetype_order(order, i) {
- size = ((1 << order) << PAGE_SHIFT) >> 10;
- list_for_each(p, &(zone->free_area[order].free_list[i])) {
- if (size > *max_free) {
- *max_free = size;
- }
- *total_free += size;
- }
- }
- spin_unlock_irqrestore(&zone->lock, flags);
- }
-}
-
-struct profile_counter_pkt profile_builtin_stats[] =
-{
- {
- "Free memory(KB)", 0
- },
- {
- "Max free Block(KB)", 0
- }
-};
-
-/*
- * make a packet full of performance counters
- */
-static char prof_pkt[PROFILE_MAX_PACKET_SIZE];
-static int profile_make_stats_packet(char *buf, int count)
-{
- char *ptr = prof_pkt;
- struct profile_header_counters hdr;
- int stat_count = 0;
- int i;
- unsigned int total_free, max_free;
- int builtin_count = sizeof(profile_builtin_stats) / sizeof(struct profile_counter_pkt);
-
- if (count > PROFILE_MAX_PACKET_SIZE) {
- count = PROFILE_MAX_PACKET_SIZE;
- }
- stat_count = (count - sizeof(struct profile_header_counters)) / sizeof (struct profile_counter_pkt);
- stat_count -= builtin_count;
-
- if (stat_count <= 0) {
- return 0;
- }
-
- if (stat_count > node->num_counters) {
- stat_count = node->num_counters;
- }
-
- hdr.magic = PROF_MAGIC_COUNTERS;
- hdr.ultra_sample_time = node->clocks;
- hdr.ultra_count = stat_count;
- hdr.linux_sample_time = UBICOM32_IO_TIMER->sysval;
- hdr.linux_count = builtin_count;
- memcpy(ptr, (void *)&hdr, sizeof(struct profile_header_counters));
- ptr += sizeof(struct profile_header_counters);
-
-
- for (i = 0; i < stat_count; ++i) {
- memcpy(ptr, (void *)(&(node->counters[i])), sizeof(struct profile_counter));
- ptr += sizeof(struct profile_counter);
- }
-
- /*
- * built in statistics
- */
- profile_get_memory_stats(&total_free, &max_free);
- profile_builtin_stats[0].value = total_free;
- profile_builtin_stats[1].value = max_free;
- memcpy(ptr, (void *)profile_builtin_stats, sizeof(profile_builtin_stats));
- ptr += sizeof(profile_builtin_stats);
-
- if (copy_to_user(buf, prof_pkt, ptr - prof_pkt) != 0) {
- return -EFAULT;
- }
- return ptr - prof_pkt;
-}
-
-/*
- * return a udp packet ready to send to the profiler tool
- * when there are no packets left to make, return 0
- */
-static int profile_read(struct file *filp, char *buf, size_t count, loff_t *f_pos)
-{
- int result = 0;
- if (!node) {
- return -ENOENT;
- }
- node->busy = 1;
- if (!node->enabled) {
- node->busy = 0;
- return -EPERM;
- }
- if (!node->samples) {
- node->busy = 0;
- return -ENOMEM;
- }
-
- if (profile_first_packet) {
- result = profile_make_stats_packet(buf, count);
- profile_first_packet = 0;
- }
- if (result == 0) {
- result = profile_make_data_packet(buf, count);
- if (result == 0) {
- profile_first_packet = 1;
- }
- }
- node->busy = 0;
- return result;
-
-}
-
-static int profile_release(struct inode *inode, struct file *filp)
-{
- if (!node) {
- return -ENOENT;
- }
- node->busy = 1;
- if (node->enabled) {
- node->enabled = 0;
- node->count = 0;
- node->tail = node->head;
- node->busy = 0;
- return 0;
- }
- node->busy = 0;
- profile_first_packet = 1;
- return -EBADF;
-}
-
-static const struct file_operations profile_fops = {
- .open = profile_open,
- .read = profile_read,
- .release = profile_release,
-};
-
-static int page_aligned(void *x)
-{
- return !((unsigned int)x & ((1 << PAGE_SHIFT) - 1));
-}
-
-static int profile_maps_open(struct inode *inode, struct file *filp)
-{
- struct rb_node *rb;
- int num = 0;
- int slab_start;
- struct vm_area_struct *vma;
- int type = PROFILE_MAP_TYPE_UNKNOWN;
- int flags, i;
- struct list_head *p;
- struct zone *zone;
-
- /*
- * get the slab data (first so dups will show up as vmas)
- */
- slab_start = num;
- num += kmem_cache_block_info("size-512", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
- num += kmem_cache_block_info("size-1024", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
- num += kmem_cache_block_info("size-2048", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
- num += kmem_cache_block_info("size-4096", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
- num += kmem_cache_block_info("size-8192", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
-
- for (i = slab_start; i < num; ++i) {
- profile_pm[i].type_size |= PROFILE_MAP_TYPE_SMALL << PROFILE_MAP_TYPE_SHIFT;
- }
-
- slab_start = num;
- num += kmem_cache_block_info("dentry", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
- num += kmem_cache_block_info("inode_cache", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
- num += kmem_cache_block_info("sysfs_dir_cache", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
- num += kmem_cache_block_info("proc_inode_cache", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
-
- for (i = slab_start; i < num; ++i) {
- profile_pm[i].type_size |= PROFILE_MAP_TYPE_FS << PROFILE_MAP_TYPE_SHIFT;
- }
-
- /*
- * get all the vma regions (allocated by mmap, most likely
- */
-#if 0
- down_read(&nommu_vma_sem);
- for (rb = rb_first(&nommu_vma_tree); rb && num < PROFILE_NUM_MAPS; rb = rb_next(rb)) {
- vma = rb_entry(rb, struct vm_area_struct, vm_rb);
- profile_pm[num].start = (vma->vm_start - SDRAMSTART) >> PAGE_SHIFT;
- profile_pm[num].type_size = (vma->vm_end - vma->vm_start + (1 << PAGE_SHIFT) - 1) >> PAGE_SHIFT;
- flags = vma->vm_flags & 0xf;
- if (flags == (VM_READ | VM_EXEC)) {
- type = PROFILE_MAP_TYPE_TEXT;
- } else if (flags == (VM_READ | VM_WRITE | VM_EXEC)) {
- type = PROFILE_MAP_TYPE_STACK;
- } else if (flags == (VM_READ | VM_WRITE)) {
- type = PROFILE_MAP_TYPE_APP_DATA;
- }
- profile_pm[num].type_size |= type << PROFILE_MAP_TYPE_SHIFT;
- num++;
- }
- up_read(&nommu_vma_sem);
- if (rb) {
- return -ENOMEM;
- }
-#endif
-
- /*
- * get all the free regions. In each zone, the array of free_area lists contains the first page of each frame of size 1 << order
- */
- for_each_zone(zone) {
- unsigned long order, flags, i;
- struct page *page;
-
- if (!populated_zone(zone))
- continue;
-
- if (!is_normal(zone))
- continue;
-
- spin_lock_irqsave(&zone->lock, flags);
- for_each_migratetype_order(order, i) {
- list_for_each(p, &(zone->free_area[order].free_list[i])) {
- page = list_entry(p, struct page, lru);
- profile_pm[num].start = ((page_to_phys(page) - SDRAMSTART) >> PAGE_SHIFT) - 0x40;
- profile_pm[num].type_size = (PROFILE_MAP_TYPE_FREE << PROFILE_MAP_TYPE_SHIFT) | order;
- num++;
- if (num >= PROFILE_NUM_MAPS) {
- spin_unlock_irqrestore(&zone->lock, flags);
- return -ENOMEM;
- }
- }
- }
- spin_unlock_irqrestore(&zone->lock, flags);
- }
-
- /*
- * get the filesystem inodes
- */
- list_for_each(p, &(super_blocks)) {
- struct super_block *sb;
- struct list_head *q;
- if (num >= PROFILE_NUM_MAPS)
- break;
- sb = list_entry(p, struct super_block, s_list);
- if (page_aligned(sb)) {
- profile_pm[num].start = ((unsigned int)sb - SDRAMSTART) >> PAGE_SHIFT;
- profile_pm[num].type_size = (PROFILE_MAP_TYPE_FS << PROFILE_MAP_TYPE_SHIFT);
- num++;
- }
- list_for_each(q, &(sb->s_inodes)) {
- struct inode *in;
- if (num >= PROFILE_NUM_MAPS)
- break;
- in = list_entry(q, struct inode, i_sb_list);
- if (page_aligned(in)) {
- profile_pm[num].start = ((unsigned int)in - SDRAMSTART) >> PAGE_SHIFT;
- profile_pm[num].type_size = (PROFILE_MAP_TYPE_FS << PROFILE_MAP_TYPE_SHIFT);
- num++;
- }
- }
- }
-
- /*
- * get the buffer cache pages
- */
- for (i = 0; i < num_physpages && num < PROFILE_NUM_MAPS; ++i) {
- if ((mem_map + i)->flags & (1 << PG_lru)) {
- int start = i;
- while ((mem_map + i)->flags & (1 << PG_lru) && i < num_physpages)
- i++;
- profile_pm[num].start = start;
- profile_pm[num].type_size = (i - start) | (PROFILE_MAP_TYPE_CACHE << PROFILE_MAP_TYPE_SHIFT);
- num++;
- }
- }
-
- filp->private_data = (void *)num;
- return 0;
-}
-
-/*
- * return one packet of map data, or 0 if all maps have been returned already
- */
-static int profile_maps_read(struct file *filp, char *buf, size_t count, loff_t *f_pos)
-{
- struct profile_header_maps header;
- char *p = buf + sizeof(header);
- int total = (int)filp->private_data;
-
- header.count = (count - sizeof(header)) / sizeof(struct profile_map);
- if (header.count > PROFILE_MAX_MAPS) {
- header.count = PROFILE_MAX_MAPS;;
- }
- if (header.count > total - *f_pos) {
- header.count = total - *f_pos;
- }
-
- if (header.count == 0) {
- return 0;
- }
-
- header.magic = PROF_MAGIC_MAPS;
- header.page_shift = PAGE_SHIFT;
-
- if (copy_to_user(buf, &header, sizeof(header)) != 0) {
- return -EFAULT;
- }
- if (copy_to_user(p, (void *)&profile_pm[*f_pos], sizeof(struct profile_map) * header.count) != 0) {
- return -EFAULT;
- }
- *f_pos += header.count;
-
- return sizeof(header) + sizeof(struct profile_map) * header.count;
-}
-
-static int profile_maps_release(struct inode *inode, struct file *filp)
-{
- return 0;
-}
-
-static const struct file_operations profile_maps_fops = {
- .open = profile_maps_open,
- .read = profile_maps_read,
- .release = profile_maps_release,
-};
-
-static int profile_rate_show(struct seq_file *m, void *v)
-{
- if (node) {
- seq_printf(m, "%d samples per second. %d virtual counters.\n", node->rate, node->num_counters);
- } else {
- seq_printf(m, "Profiler is not initialized.\n");
- }
- return 0;
-}
-
-static int profile_rate_open(struct inode *inode, struct file *filp)
-{
- return single_open(filp, profile_rate_show, NULL);
-}
-
-static int profile_rate_write(struct file *filp, const char *buf, size_t len, loff_t *off)
-{
- *off = 0;
- return 0;
-}
-
-static const struct file_operations profile_rate_fops = {
- .open = profile_rate_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = profile_rate_write,
-};
-
-int ubi32_profile_init_module(void)
-{
- struct proc_dir_entry *pdir;
-
- /*
- * find the device
- */
- node = (struct profilenode *)devtree_find_node("profiler");
- if (!node) {
- printk(KERN_INFO "Profiler does not exist.\n");
- return -ENODEV;
- }
-
- /*
- * allocate the sample buffer
- */
- node->max_samples = PROFILE_MAX_SAMPLES;
- node->samples = kmalloc(node->max_samples * sizeof(struct profile_sample), GFP_KERNEL);
- if (!node->samples) {
- printk(KERN_INFO "Profiler sample buffer kmalloc failed.\n");
- return -ENOMEM;
- }
-
- /*
- * connect to the file system
- */
- pdir = proc_mkdir("profile", NULL);
- if (!pdir) {
- return -ENOMEM;
- }
- if (!proc_create("data", 0, pdir, &profile_fops)) {
- return -ENOMEM;
- }
- if (!proc_create("rate", 0, pdir, &profile_rate_fops)) {
- return -ENOMEM;
- }
- if (!proc_create("maps", 0, pdir, &profile_maps_fops)) {
- return -ENOMEM;
- }
- return 0;
-}
-
-
-module_init(ubi32_profile_init_module);
-
-MODULE_AUTHOR("David Fotland");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/profile.h
- * Private data for the profile module
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/types.h>
-#include <asm/devtree.h>
-#include "profpkt.h"
-
-#ifndef _PROFILE_H_
-#define _PROFILE_H_
-
-#define PROFILE_MAX_THREADS 16
-#define PROFILE_MAX_SAMPLES 1024
-
-struct profile_sample;
-struct oprofile_sample;
-
-/*
- * values chosen so all counter values fit in a single UDP packet
- */
-#define PROFILE_NODE_MAX_COUNTERS 32
-
-struct profile_counter {
- char name[PROFILE_COUNTER_NAME_LENGTH];
- unsigned int value;
-};
-
-struct profilenode {
- struct devtree_node dn;
- volatile u32_t enabled; /* Is the profiler enabled to take samples? */
- volatile u32_t busy; /* set when the samples are being read by the driver */
- volatile u32_t rate; /* What is the sampling rate? */
- volatile u32_t enabled_threads; /* which threads were enabled at the last sample time */
- volatile u32_t hrt; /* HRT threads */
- volatile u32_t profiler_thread; /* thread running the profile sampler */
- volatile u32_t clocks; /* system clock timer at last sample */
- volatile u32_t clock_freq; /* clock frequency in Hz */
- volatile u32_t ddr_freq; /* memory frequency */
- volatile u32_t cpu_id; /* chip_id register */
- volatile u32_t inst_count[PROFILE_MAX_THREADS]; /* sampled instruction counts at most recent sample */
- volatile u32_t stats[4]; /* contents of the cache statistics counters */
- volatile u16_t head; /* sample taker puts samples here */
- volatile u16_t tail; /* packet filler takes samples here */
- volatile u16_t count; /* number of valid samples */
- volatile u16_t max_samples; /* how many samples can be in the samples array */
- struct profile_sample *samples; /* samples array allocated by the linux driver */
- volatile u32_t num_counters; /* how many registered performance counters */
- volatile struct profile_counter counters[PROFILE_NODE_MAX_COUNTERS];
-
- /* unimplemented interface for future oprofile work */
- volatile u16_t oprofile_head; /* sample taker puts samples here */
- volatile u16_t oprofile_tail; /* packet filler takes samples here */
- volatile u16_t oprofile_count; /* how many oprofile sampels are are in use */
- volatile u16_t oprofile_max_samples; /* samples array size for oprofile samples */
- struct oprofile_sample *oprofile_samples; /* oprofile sample buffer */
-};
-
-#endif
+++ /dev/null
-
-/*
- * arch/ubicom32/mach-common/profpkt.c
- * Ubicom32 Profiler packet formats for communication between the linux proc driver and the profiler display tool
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-#define PROFILE_PORT 51080
-#define PROFILE_POSIX_NAME_LENGTH 32
-
-/*
- * profile UDP packet format for communicating between ip3k and host
- *
- * every packet starts with a header, followed by samples.
- * samples are only taken for non-hrt threads that are
- * active
- */
-#define PROF_MAGIC 0x3ea0
-#define PROF_MAGIC_COUNTERS 0x9ea0
-#define PROF_MAGIC_MAPS 0xaea0
-
-/*
- * Versions (31 max):
- * 1 to 4 were before 6.0 release, development versions
- * 5 was forward compatible version, shipped with 6.0 and 6.1
- * 6 adds heap packets, and clock_freq to header, shipped with 6.2
- * 7 adds a sequence numbers to check for dropped packets, shipped with 6.3.5
- * 8 adds mqueue timing information, shipped with 6.3.5
- * 9 adds sdram heap size information, shipped with 6.4
- * 10 adds heapmem heap callers and long latency stack traces. shipped with 6.4
- * 11 adds support for Mars (IP5K). shipped with 6.10
- * 12 adds more support for Mars. Shipped with 7.0
- * 13 adds per sample latency measurement. Shipped with 7.2
- * 14 changes the heap format and adds a string packet. Shipped with 7.4
- * 15 adds dsr stats and posix. shipped with 7.6
- * 16 corrects maximum packet count for Ares. ships with 7.9
- * 17 adds a5 register value to sample
- */
-
-#define PROFILE_VERSION 17
-#define PROFILE_MAX_PACKET_SIZE 1440
-
-#define PROFILE_MAX_THREADS 16
-
-/*
- * each packet starts with a profile_header, then sample_count samples
- * samples are gprof samples of pc, the return address, condition codes, and
- * active threads
- */
-struct profile_header {
- u16_t magic; /* magic number and version */
- u8_t header_size; /* number of bytes in profile header */
- u8_t sample_count; /* number of samples in the packet */
- u32_t clocks; /* clock counter value */
- u32_t instruction_count[PROFILE_MAX_THREADS];
- /* instructions executed per thread */
- u32_t profile_instructions; /* instructions executed by profiler mainline */
- u16_t enabled; /* which threads are enabled */
- u16_t hrt; /* which threads are hrt */
- u16_t high; /* which threads are high priority */
- u16_t profiler_thread; /* which thread runs the profiler */
- u32_t heap_free; /* current free on-cihp heap space in bytes */
- u32_t heap_low_water; /* on-chip heap low water mark */
- u32_t netpage_free; /* number of free on-chip net pages */
- u32_t netpage_low_water; /* low water mark on free on-chip netpages */
- u32_t min_sp[PROFILE_MAX_THREADS];
- /* stack pointer values per thread */
- u32_t clock_freq; /* clock frequency (Hz) of system being analyzed */
- u32_t seq_num; /* to detect dropped profiler packets */
- u32_t timing_sequence; /* sample number since boot */
- u32_t timing_interval; /* second per sample timing interval */
- u32_t timing_worst_time; /* duration of longest finction called, in core clocks */
- u32_t timing_function; /* address of longest function */
- u32_t timing_average; /* average time of all functions in last interval */
- u32_t timing_count; /* number of functions called in last interval */
- u32_t extheap_free; /* current free extmem heap space in bytes */
- u32_t extheap_low_water; /* extmem heap low water mark */
- u32_t cpu_id; /* CHIP_ID register contents */
- u32_t perf_counters[4]; /* contents of the CPU performance counters */
- u8_t perf_config[4]; /* what is being counted */
- u32_t ddr_freq; /* DDR clock frequency */
- u32_t extnetpage_free; /* number of free off chip net pages */
- u32_t extnetpage_low_water; /* low water mark on off-chip free netpages */
- u32_t dsr_max_latency; /* max time to process a dsr interrupt, in clocks, since last packet */
- u32_t dsr_ave_latency; /* average dsr latency over last DSR_STATS_RECENT_COUNT interrupts */
- u32_t dsr_count; /* number of dsr interrupts since last packet */
-};
-
-struct profile_header_counters {
- u16_t magic;
- u16_t ultra_count; /* how many ultra counters follow this */
- u32_t ultra_sample_time; /* in chip clocks */
- u32_t linux_count; /* how many linux counters follow this */
- u32_t linux_sample_time;
-};
-
-/*
- * values chosen so all counter values fit in a single 1400 byte UDP packet
- */
-#define PROFILE_COUNTER_NAME_LENGTH 20
-#define PROFILE_MAX_COUNTERS ((PROFILE_MAX_PACKET_SIZE - sizeof(struct profile_header_counters)) / (PROFILE_COUNTER_NAME_LENGTH + 4))
-
-struct profile_counter_pkt {
- char name[PROFILE_COUNTER_NAME_LENGTH];
- unsigned int value;
-};
-
-/*
- * send memory maps from linux to profiler tool
- */
-
-struct profile_header_maps {
- u16_t magic;
- u16_t count;
- u32_t page_shift;
-};
-
-#define PROFILE_MAP_NUM_TYPES 32
-
-/* types 0-15: size field is order. True size is 2^order */
-#define PROFILE_MAP_TYPE_UNKNOWN 0
-#define PROFILE_MAP_TYPE_FREE 1
-#define PROFILE_MAP_TYPE_SMALL 2
-#define PROFILE_MAP_TYPE_FS 3
-/* types 16-31: size field is pages. True size is (1 << PAGE_SHIFT) * size */
-#define PROFILE_MAP_SIZE_TYPE 16
-#define PROFILE_MAP_TYPE_TEXT 16
-#define PROFILE_MAP_TYPE_STACK 17
-#define PROFILE_MAP_TYPE_APP_DATA 18
-#define PROFILE_MAP_TYPE_CACHE 19
-#define PROFILE_MAP_RESERVED 24
-
-#define PROFILE_MAP_TYPE_SHIFT 11
-#define PROFILE_MAP_SIZE_MASK 0x7ff
-
-struct profile_map {
- u16_t start; /* start page number of segment, relative to start of DRAM */
- u16_t type_size; /* type (4 bits) of the segment and size in pages (12 bits) */
-};
-
-#define PROFILE_MAX_MAPS (PROFILE_MAX_PACKET_SIZE - sizeof(struct profile_header_maps)) / sizeof(struct profile_map)
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/ring_tio.c
- * Generic initialization for UIO Ubicom32 Ring
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/platform_device.h>
-#include <linux/types.h>
-
-#include <asm/devtree.h>
-#include <asm/ring_tio.h>
-
-static const char *ring_tio_driver_name = "uio_ubicom32ring";
-
-/*
- * The number of ring_tio's currently allocated, used for .id
- */
-static int __initdata ring_tio_count;
-
-/*
- * The maximum number of resources that the ring_tio will have.
- * Currently 3, a register space, and up to 2 interrupts.
- */
-#define RING_TIO_MAX_RESOURCES 3
-
-/*
- * ring_tio_init
- * Checks the device tree and instantiates the driver if found
- */
-void __init ring_tio_init(const char *node_name)
-{
- struct platform_device *pdev;
- struct resource *res;
- int resource_idx = 0;
- struct ring_tio_node *ring_node;
-
- /*
- * Check the device tree for the ring_tio
- */
- ring_node = (struct ring_tio_node *)devtree_find_node(node_name);
- if (!ring_node) {
- printk(KERN_WARNING "Ring TIO '%s' not found\n", node_name);
- return;
- }
-
- if (ring_node->version != RING_TIO_NODE_VERSION) {
- printk(KERN_WARNING "ring_tio not compatible\n");
- return;
- }
-
- /*
- * Dynamically create the platform_device structure and resources
- */
- pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
- if (!pdev) {
- printk(KERN_WARNING "ring_tio could not alloc pdev\n");
- return;
- }
-
- res = kzalloc(sizeof(struct resource) * RING_TIO_MAX_RESOURCES,
- GFP_KERNEL);
- if (!res) {
- kfree(pdev);
- printk(KERN_WARNING "ring_tio could not alloc res\n");
- return;
- }
-
- pdev->name = ring_tio_driver_name;
- pdev->id = ring_tio_count++;
- pdev->resource = res;
-
- /*
- * Fill in the resources and platform data from devtree information
- */
- res[resource_idx].start = (u32_t)(ring_node->regs);
- res[resource_idx].end = (u32_t)(ring_node->regs);
- res[resource_idx].flags = IORESOURCE_MEM;
- resource_idx++;
-
- if (ring_node->dn.sendirq != 0xFF) {
- res[resource_idx].start = ring_node->dn.sendirq;
- res[resource_idx].flags = IORESOURCE_IRQ;
- resource_idx++;
- }
-
- if (ring_node->dn.recvirq != 0xFF) {
- res[resource_idx].start = ring_node->dn.recvirq;
- res[resource_idx].flags = IORESOURCE_IRQ;
- resource_idx++;
- }
- pdev->num_resources = resource_idx;
-
- printk(KERN_INFO "RingTIO.%d '%s' found irq=%d/%d regs=%p pdev=%p/%p\n",
- ring_tio_count - 1, node_name, ring_node->dn.sendirq,
- ring_node->dn.recvirq, ring_node->regs, pdev, res);
-
- /*
- * Try to get the device registered
- */
- pdev->dev.platform_data = (void *)node_name;
- if (platform_device_register(pdev) < 0) {
- printk(KERN_WARNING "Ring failed to register\n");
- kfree(pdev);
- kfree(res);
- }
-}
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/switch-bcm539x-reg.h
- * Broadcom switch definitions for Ubicom32 architecture.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-/*
- * Broadcom 53xx RoboSwitch device driver.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#ifndef _SWITCH_BCM539X_REG_H_
-#define _SWITCH_BCM539X_REG_H_
-
-#define BCM539X_CMD_READ 0x60
-#define BCM539X_CMD_WRITE 0x61
-
-#define BCM539X_GLOBAL_SPI_DATA0 0xf0
-
-#define BCM539X_GLOBAL_SPI_STATUS 0xfe
-#define BCM539X_GLOBAL_SPI_ST_SPIF (1<<7)
-#define BCM539X_GLOBAL_SPI_ST_RACK (1<<5)
-
-#define BCM539X_GLOBAL_PAGE 0xff
-
-#define PAGE_PORT_TC 0x00 // Port Traffic Control Register
-
-#define PAGE_QOS_CTL 0x30 // QoS Global Control Register
-#define PAGE_QOS_TAG 0x34 // Default IEEE 802.1Q TAG Register
-
-#define PAGE_MII_CTL_PORT0 0x10 // Internal PHY MII Register
-#define PAGE_MII_CTL_PORT1 0x11
-#define PAGE_MII_CTL_PORT2 0x12
-#define PAGE_MII_CTL_PORT3 0x13
-#define PAGE_MII_CTL_PORT4 0x14
-
-#define PAGE_STATUS 0x01 // Status Register Page
-#define PAGE_RATE_CONTROL 0x41 // Broadcast Storm Suppression Register
-
-#define REG_GRATE_CONTROL 0x00
-
-#define REG_LED_POWER 0x12
-
-// Ingress Rate Control
-#define REG_IRATE_CONTROLP0 0x10
-#define REG_IRATE_CONTROLP1 0x14
-#define REG_IRATE_CONTROLP2 0x18
-#define REG_IRATE_CONTROLP3 0x1C
-#define REG_IRATE_CONTROLP4 0x20
-#define REG_IRATE_CONTROLP7 0x2C
-#define REG_IRATE_CONTROLPI 0x30
-
-// Egress Rate Control
-#define REG_ERATE_CONTROLP0 0x80
-#define REG_ERATE_CONTROLP1 0x82
-#define REG_ERATE_CONTROLP2 0x84
-#define REG_ERATE_CONTROLP3 0x86
-#define REG_ERATE_CONTROLP4 0x88
-#define REG_ERATE_CONTROLP5 0x8A
-#define REG_ERATE_CONTROLP6 0x8C
-#define REG_ERATE_CONTROLP7 0x8E
-#define REG_ERATE_CONTROLPI 0x90
-
-#define REG_LINK_STATUS 0x00
-
-#define REG_TC_PORT0 0x00
-#define REG_TC_PORT1 0x01
-#define REG_TC_PORT2 0x02
-#define REG_TC_PORT3 0x03
-#define REG_TC_PORT4 0x04
-#define REG_TC_PORT5 0x05
-
-#define REG_SPEED_CTL 0x00
-#define REG_SPEED_ADV100 0x08
-#define REG_SPEED_ADV1000 0x12
-
-#define REG_QOS_EN 0x00
-#define REG_QOS_TAG_PORT1 0x12 // Default IEEE 802.1Q TAG, PORT 1
-#define REG_QOS_TAG_PORT2 0x14 // Default IEEE 802.1Q TAG, PORT 2
-#define REG_QOS_TAG_PORT3 0x16 // Default IEEE 802.1Q TAG, PORT 3
-#define REG_QOS_TAG_PORT4 0x18 // Default IEEE 802.1Q TAG, PORT 4
-#define REG_QOS_PID_PORT1 0x52 // Ingress Port Priority ID MAP, PORT 1
-#define REG_QOS_PID_PORT2 0x54 // Ingress Port Priority ID MAP, PORT 2
-#define REG_QOS_PID_PORT3 0x56 // Ingress Port Priority ID MAP, PORT 3
-#define REG_QOS_PID_PORT4 0x58 // Ingress Port Priority ID MAP, PORT 4
-#define REG_QOS_TXQ_CTL 0x80 // Tx Queue Control Register
-#define REG_QOS_TXQ_WHTQ0 0x81 // Tx Queue Weight Register Queue 0
-#define REG_QOS_TXQ_WHTQ1 0x82 // Tx Queue Weight Register Queue 1
-#define REG_QOS_TXQ_WHTQ2 0x83 // Tx Queue Weight Register Queue 2
-#define REG_QOS_TXQ_WHTQ3 0x84 // Tx Queue Weight Register Queue 3
-
-#define REG_CTRL_PPSEL 0x24 /* 5397: Protected port select register */
-
-#define RATE_CONTROL_ENABLED (1 << 22)
-#define RATE_CONTROL_BSIZE ((1 << 10) | (1 << 9) | (1 << 8))
-
-#define RATE_CONTROL_HIGH ((1 << 7) | (1 << 6) | (1 << 5) | (1 << 4))
-#define RATE_CONTROL_HIGH_N ~((1 << 3) | (1 << 2) | (1 << 1) | (1 << 0))
-
-#define RATE_CONTROL_MEDIUM ((1 << 6) | (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2) | (1 << 1) | (1 << 0))
-#define RATE_CONTROL_MEDIUM_N ~((1 << 7))
-
-#define RATE_CONTROL_NORMAL ((1 << 5) | (1 << 2) | (1 << 0))
-#define RATE_CONTROL_NORMAL_N ~((1 << 7) | (1 << 6) | (1 << 4) | (1 << 3) | (1 << 1))
-
-#define RATE_CONTROL_LOW ((1 << 4) | (1 << 3) | (1 << 0))
-#define RATE_CONTROL_LOW_N ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 2) | (1 << 1))
-
-// --- Gemtek, Configure the switch to support Ethernet Port QoS
-
-/* MII access registers */
-#define PSEUDO_PHYAD 0x1E /* MII Pseudo PHY address */
-#define REG_MII_PAGE 0x10 /* MII Page register */
-#define REG_MII_ADDR 0x11 /* MII Address register */
-#define REG_MII_DATA0 0x18 /* MII Data register 0 */
-#define REG_MII_DATA1 0x19 /* MII Data register 1 */
-#define REG_MII_DATA2 0x1a /* MII Data register 2 */
-#define REG_MII_DATA3 0x1b /* MII Data register 3 */
-
-/* Page numbers */
-#define PAGE_CTRL 0x00 /* Control page */
-#define PAGE_MMR 0x02 /* 5397 Management/Mirroring page */
-#define PAGE_VTBL 0x05 /* ARL/VLAN Table access page */
-#define PAGE_VLAN 0x34 /* VLAN page */
-
-/* Control page registers */
-#define REG_CTRL_PORT0 0x00 /* Port 0 traffic control register */
-#define REG_CTRL_PORT1 0x01 /* Port 1 traffic control register */
-#define REG_CTRL_PORT2 0x02 /* Port 2 traffic control register */
-#define REG_CTRL_PORT3 0x03 /* Port 3 traffic control register */
-#define REG_CTRL_PORT4 0x04 /* Port 4 traffic control register */
-#define REG_CTRL_PORT5 0x05 /* Port 5 traffic control register */
-#define REG_CTRL_PORT6 0x06 /* Port 6 traffic control register */
-#define REG_CTRL_PORT7 0x07 /* Port 7 traffic control register */
-#define REG_CTRL_MODE 0x0B /* Switch Mode register */
-#define REG_CTRL_MIIPO 0x0E /* 5325: MII Port Override register */
-#define REG_CTRL_SRST 0x79 /* Software reset control register */
-
-#define REG_DEVICE_ID 0x30 /* 539x Device id: */
-#define DEVID5395 0x95 /* 5395 */
-#define DEVID5397 0x97 /* 5397 */
-#define DEVID5398 0x98 /* 5398 */
-#define REG_REVISION_ID 0x40 /* 539x Revision id: */
-
-/* VLAN page registers */
-#define REG_VLAN_CTRL0 0x00 /* VLAN Control 0 register */
-#define REG_VLAN_CTRL1 0x01 /* VLAN Control 1 register */
-#define REG_VLAN_CTRL2 0x02 /* VLAN Control 2 register */
-#define REG_VLAN_CTRL3 0x03 /* VLAN Control 3 register */
-#define REG_VLAN_CTRL4 0x04 /* VLAN Control 4 register */
-#define REG_VLAN_CTRL5 0x05 /* VLAN Control 5 register */
-#define REG_VLAN_ACCESS 0x06 /* VLAN Table Access register */
-#define REG_VLAN_WRITE 0x08 /* VLAN Write register */
-#define REG_VLAN_READ 0x0C /* VLAN Read register */
-#define REG_VLAN_PTAG0 0x10 /* VLAN Default Port Tag register - port 0 */
-#define REG_VLAN_PTAG1 0x12 /* VLAN Default Port Tag register - port 1 */
-#define REG_VLAN_PTAG2 0x14 /* VLAN Default Port Tag register - port 2 */
-#define REG_VLAN_PTAG3 0x16 /* VLAN Default Port Tag register - port 3 */
-#define REG_VLAN_PTAG4 0x18 /* VLAN Default Port Tag register - port 4 */
-#define REG_VLAN_PTAG5 0x1a /* VLAN Default Port Tag register - port 5 */
-#define REG_VLAN_PTAG6 0x1c /* VLAN Default Port Tag register - port 6 */
-#define REG_VLAN_PTAG7 0x1e /* VLAN Default Port Tag register - port 7 */
-#define REG_VLAN_PTAG8 0x20 /* 539x: VLAN Default Port Tag register - IMP port */
-#define REG_VLAN_PMAP 0x20 /* 5325: VLAN Priority Re-map register */
-
-/* ARL/VLAN Table Access page registers */
-#define REG_VTBL_CTRL 0x00 /* ARL Read/Write Control */
-#define REG_VTBL_MINDX 0x02 /* MAC Address Index */
-#define REG_VTBL_VINDX 0x08 /* VID Table Index */
-#define REG_VTBL_ARL_E0 0x10 /* ARL Entry 0 */
-#define REG_VTBL_ARL_E1 0x18 /* ARL Entry 1 */
-#define REG_VTBL_DAT_E0 0x18 /* ARL Table Data Entry 0 */
-#define REG_VTBL_SCTRL 0x20 /* ARL Search Control */
-#define REG_VTBL_SADDR 0x22 /* ARL Search Address */
-#define REG_VTBL_SRES 0x24 /* ARL Search Result */
-#define REG_VTBL_SREXT 0x2c /* ARL Search Result */
-#define REG_VTBL_VID_E0 0x30 /* VID Entry 0 */
-#define REG_VTBL_VID_E1 0x32 /* VID Entry 1 */
-#define REG_VTBL_PREG 0xFF /* Page Register */
-#define REG_VTBL_ACCESS 0x60 /* VLAN table access register */
-#define REG_VTBL_INDX 0x61 /* VLAN table address index register */
-#define REG_VTBL_ENTRY 0x63 /* VLAN table entry register */
-#define REG_VTBL_ACCESS_5395 0x80 /* VLAN table access register */
-#define REG_VTBL_INDX_5395 0x81 /* VLAN table address index register */
-#define REG_VTBL_ENTRY_5395 0x83 /* VLAN table entry register */
-
-/* SPI registers */
-#define REG_SPI_PAGE 0xff /* SPI Page register */
-
-#endif
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/switch-bcm539x.c
- * BCM539X switch driver, SPI mode
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/mii.h>
-
-#include <asm/switch-dev.h>
-#include <asm/ubicom32-spi-gpio.h>
-#include "switch-core.h"
-#include "switch-bcm539x-reg.h"
-
-#define DRIVER_NAME "bcm539x-spi"
-#define DRIVER_VERSION "1.0"
-
-#undef BCM539X_DEBUG
-#define BCM539X_SPI_RETRIES 100
-
-struct bcm539x_data {
- struct switch_device *switch_dev;
-
- /*
- * Our private data
- */
- struct spi_device *spi;
- struct switch_core_platform_data *pdata;
-
- /*
- * Last page we accessed
- */
- u8_t last_page;
-
- /*
- * 539x Device ID
- */
- u8_t device_id;
-};
-
-/*
- * bcm539x_wait_status
- * Waits for the specified bit in the status register to be set/cleared.
- */
-static int bcm539x_wait_status(struct bcm539x_data *bd, u8_t mask, int set)
-{
- u8_t txbuf[2];
- u8_t rxbuf;
- int i;
- int ret;
-
- txbuf[0] = BCM539X_CMD_READ;
- txbuf[1] = BCM539X_GLOBAL_SPI_STATUS;
- for (i = 0; i < BCM539X_SPI_RETRIES; i++) {
- ret = spi_write_then_read(bd->spi, txbuf, 2, &rxbuf, 1);
- rxbuf &= mask;
- if ((set && rxbuf) || (!set && !rxbuf)) {
- return 0;
- }
- udelay(1);
- }
-
- return -EIO;
-}
-
-/*
- * bcm539x_set_page
- * Sets the register page for access (only if necessary)
- */
-static int bcm539x_set_page(struct bcm539x_data *bd, u8_t page)
-{
- u8_t txbuf[3];
-
- if (page == bd->last_page) {
- return 0;
- }
-
- bd->last_page = page;
-
- txbuf[0] = BCM539X_CMD_WRITE;
- txbuf[1] = BCM539X_GLOBAL_PAGE;
- txbuf[2] = page;
-
- return spi_write(bd->spi, txbuf, 3);
-}
-
-/*
- * bcm539x_write_bytes
- * Writes a number of bytes to a given page and register
- */
-static int bcm539x_write_bytes(struct bcm539x_data *bd, u8_t page,
- u8_t reg, void *buf, u8_t len)
-{
- int ret;
- u8_t *txbuf;
-
- txbuf = kmalloc(2 + len, GFP_KERNEL);
- if (!txbuf) {
- return -ENOMEM;
- }
-
- /*
- * Make sure the chip has finished processing our previous request
- */
- ret = bcm539x_wait_status(bd, BCM539X_GLOBAL_SPI_ST_SPIF, 0);
- if (ret) {
- goto done;
- }
-
- /*
- * Set the page
- */
- ret = bcm539x_set_page(bd, page);
- if (ret) {
- goto done;
- }
-
- /*
- * Read the data
- */
- txbuf[0] = BCM539X_CMD_WRITE;
- txbuf[1] = reg;
- memcpy(&txbuf[2], buf, len);
-
-#ifdef BCM539X_DEBUG
- {
- int i;
- printk("write page %02x reg %02x len=%d buf=", page, reg, len);
- for (i = 0; i < len + 2; i++) {
- printk("%02x ", txbuf[i]);
- }
- printk("\n");
- }
-#endif
-
- ret = spi_write(bd->spi, txbuf, 2 + len);
-
-done:
- kfree(txbuf);
- return ret;
-}
-
-/*
- * bcm539x_write_32
- * Writes 32 bits of data to the given page and register
- */
-static inline int bcm539x_write_32(struct bcm539x_data *bd, u8_t page,
- u8_t reg, u32_t data)
-{
- data = cpu_to_le32(data);
- return bcm539x_write_bytes(bd, page, reg, &data, 4);
-}
-
-/*
- * bcm539x_write_16
- * Writes 16 bits of data to the given page and register
- */
-static inline int bcm539x_write_16(struct bcm539x_data *bd, u8_t page,
- u8_t reg, u16_t data)
-{
- data = cpu_to_le16(data);
- return bcm539x_write_bytes(bd, page, reg, &data, 2);
-}
-
-/*
- * bcm539x_write_8
- * Writes 8 bits of data to the given page and register
- */
-static inline int bcm539x_write_8(struct bcm539x_data *bd, u8_t page,
- u8_t reg, u8_t data)
-{
- return bcm539x_write_bytes(bd, page, reg, &data, 1);
-}
-
-/*
- * bcm539x_read_bytes
- * Reads a number of bytes from a given page and register
- */
-static int bcm539x_read_bytes(struct bcm539x_data *bd, u8_t page,
- u8_t reg, void *buf, u8_t len)
-{
- u8_t txbuf[2];
- int ret;
-
- /*
- * (1) Make sure the chip has finished processing our previous request
- */
- ret = bcm539x_wait_status(bd, BCM539X_GLOBAL_SPI_ST_SPIF, 0);
- if (ret) {
- return ret;
- }
-
- /*
- * (2) Set the page
- */
- ret = bcm539x_set_page(bd, page);
- if (ret) {
- return ret;
- }
-
- /*
- * (3) Kick off the register read
- */
- txbuf[0] = BCM539X_CMD_READ;
- txbuf[1] = reg;
- ret = spi_write_then_read(bd->spi, txbuf, 2, txbuf, 1);
- if (ret) {
- return ret;
- }
-
- /*
- * (4) Wait for RACK
- */
- ret = bcm539x_wait_status(bd, BCM539X_GLOBAL_SPI_ST_RACK, 1);
- if (ret) {
- return ret;
- }
-
- /*
- * (5) Read the data
- */
- txbuf[0] = BCM539X_CMD_READ;
- txbuf[1] = BCM539X_GLOBAL_SPI_DATA0;
-
- ret = spi_write_then_read(bd->spi, txbuf, 2, buf, len);
-
-#ifdef BCM539X_DEBUG
- {
- int i;
- printk("read page %02x reg %02x len=%d rxbuf=",
- page, reg, len);
- for (i = 0; i < len; i++) {
- printk("%02x ", ((u8_t *)buf)[i]);
- }
- printk("\n");
- }
-#endif
-
- return ret;
-}
-
-/*
- * bcm539x_read_32
- * Reads an 32 bit number from a given page and register
- */
-static int bcm539x_read_32(struct bcm539x_data *bd, u8_t page,
- u8_t reg, u32_t *buf)
-{
- int ret = bcm539x_read_bytes(bd, page, reg, buf, 4);
- *buf = le32_to_cpu(*buf);
- return ret;
-}
-
-/*
- * bcm539x_read_16
- * Reads an 16 bit number from a given page and register
- */
-static int bcm539x_read_16(struct bcm539x_data *bd, u8_t page,
- u8_t reg, u16_t *buf)
-{
- int ret = bcm539x_read_bytes(bd, page, reg, buf, 2);
- *buf = le16_to_cpu(*buf);
- return ret;
-}
-
-/*
- * bcm539x_read_8
- * Reads an 8 bit number from a given page and register
- */
-static int bcm539x_read_8(struct bcm539x_data *bd, u8_t page,
- u8_t reg, u8_t *buf)
-{
- return bcm539x_read_bytes(bd, page, reg, buf, 1);
-}
-
-/*
- * bcm539x_set_mode
- */
-static int bcm539x_set_mode(struct bcm539x_data *bd, int state)
-{
- u8_t buf;
- int ret;
-
- ret = bcm539x_read_8(bd, PAGE_PORT_TC, REG_CTRL_MODE, &buf);
- if (ret) {
- return ret;
- }
-
- buf &= ~(1 << 1);
- buf |= state ? (1 << 1) : 0;
-
- ret = bcm539x_write_8(bd, PAGE_PORT_TC, REG_CTRL_MODE, buf);
- return ret;
-}
-
-/*
- * bcm539x_handle_reset
- */
-static int bcm539x_handle_reset(struct switch_device *dev, char *buf, int inst)
-{
- struct bcm539x_data *bd =
- (struct bcm539x_data *)switch_get_drvdata(dev);
- int ret;
-
- ret = bcm539x_write_8(bd, PAGE_PORT_TC, REG_CTRL_SRST,
- (1 << 7) | (1 << 4));
- if (ret) {
- return ret;
- }
-
- udelay(20);
-
- ret = bcm539x_write_8(bd, PAGE_PORT_TC, REG_CTRL_SRST, 0);
- return ret;
-}
-
-/*
- * bcm539x_handle_vlan_ports_read
- */
-static int bcm539x_handle_vlan_ports_read(struct switch_device *dev,
- char *buf, int inst)
-{
- struct bcm539x_data *bd =
- (struct bcm539x_data *)switch_get_drvdata(dev);
- int j;
- int len = 0;
- u8_t rxbuf8;
- u32_t rxbuf32;
- int ret;
-
- ret = bcm539x_write_16(bd, PAGE_VTBL, REG_VTBL_INDX_5395, inst);
- if (ret) {
- return ret;
- }
-
- ret = bcm539x_write_8(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395,
- (1 << 7) | 1);
- if (ret) {
- return ret;
- }
-
- /*
- * Wait for completion
- */
- for (j = 0; j < BCM539X_SPI_RETRIES; j++) {
- ret = bcm539x_read_8(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395,
- &rxbuf8);
- if (ret) {
- return ret;
- }
- if (!(rxbuf8 & (1 << 7))) {
- break;
- }
- }
-
- if (j == BCM539X_SPI_RETRIES) {
- return -EIO;
- }
-
- /*
- * Read the table entry
- */
- ret = bcm539x_read_32(bd, PAGE_VTBL, REG_VTBL_ENTRY_5395, &rxbuf32);
- if (ret) {
- return ret;
- }
-
- for (j = 0; j < 9; j++) {
- if (rxbuf32 & (1 << j)) {
- u16_t rxbuf16;
- len += sprintf(buf + len, "%d", j);
- if (rxbuf32 & (1 << (j + 9))) {
- buf[len++] = 'u';
- } else {
- buf[len++] = 't';
- }
- ret = bcm539x_read_16(bd, PAGE_VLAN,
- REG_VLAN_PTAG0 + (j << 1),
- &rxbuf16);
- if (ret) {
- return ret;
- }
- if (rxbuf16 == inst) {
- buf[len++] = '*';
- }
- buf[len++] = '\t';
- }
- }
-
- len += sprintf(buf + len, "\n");
- buf[len] = '\0';
-
- return len;
-}
-
-/*
- * bcm539x_handle_vlan_ports_write
- */
-static int bcm539x_handle_vlan_ports_write(struct switch_device *dev,
- char *buf, int inst)
-{
- struct bcm539x_data *bd =
- (struct bcm539x_data *)switch_get_drvdata(dev);
- int j;
- u32_t untag;
- u32_t ports;
- u32_t def;
-
- u8_t rxbuf8;
- u16_t rxbuf16;
- int ret;
-
- switch_parse_vlan_ports(dev, buf, &untag, &ports, &def);
-
-#ifdef BCM539X_DEBUG
- printk(KERN_DEBUG "'%s' inst=%d untag=%08x ports=%08x def=%08x\n",
- buf, inst, untag, ports, def);
-#endif
-
- if (!ports) {
- return 0;
- }
-
- /*
- * Change default vlan tag
- */
- for (j = 0; j < 9; j++) {
- if ((untag | def) & (1 << j)) {
- ret = bcm539x_write_16(bd, PAGE_VLAN,
- REG_VLAN_PTAG0 + (j << 1),
- inst);
- if (ret) {
- return ret;
- }
- continue;
- }
-
- if (!(dev->port_mask[0] & (1 << j))) {
- continue;
- }
-
- /*
- * Remove any ports which are not listed anymore as members of
- * this vlan
- */
- ret = bcm539x_read_16(bd, PAGE_VLAN,
- REG_VLAN_PTAG0 + (j << 1), &rxbuf16);
- if (ret) {
- return ret;
- }
- if (rxbuf16 == inst) {
- ret = bcm539x_write_16(bd, PAGE_VLAN,
- REG_VLAN_PTAG0 + (j << 1), 0);
- if (ret) {
- return ret;
- }
- }
- }
-
- /*
- * Write the VLAN table
- */
- ret = bcm539x_write_16(bd, PAGE_VTBL, REG_VTBL_INDX_5395, inst);
- if (ret) {
- return ret;
- }
-
- ret = bcm539x_write_32(bd, PAGE_VTBL, REG_VTBL_ENTRY_5395,
- (untag << 9) | ports);
- if (ret) {
- return ret;
- }
-
- ret = bcm539x_write_8(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395,
- (1 << 7) | 0);
- if (ret) {
- return ret;
- }
-
- /*
- * Wait for completion
- */
- for (j = 0; j < BCM539X_SPI_RETRIES; j++) {
- ret = bcm539x_read_bytes(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395,
- &rxbuf8, 1);
- if (ret) {
- return ret;
- }
- if (!(rxbuf8 & (1 << 7))) {
- break;
- }
- }
-
- return (j < BCM539X_SPI_RETRIES) ? 0 : -EIO;
-}
-
-/*
- * Handlers for <this_driver>/vlan/<vlan_id>
- */
-static const struct switch_handler bcm539x_switch_handlers_vlan_dir[] = {
- {
- .name = "ports",
- .read = bcm539x_handle_vlan_ports_read,
- .write = bcm539x_handle_vlan_ports_write,
- },
- {
- },
-};
-
-/*
- * bcm539x_handle_vlan_delete_write
- */
-static int bcm539x_handle_vlan_delete_write(struct switch_device *dev,
- char *buf, int inst)
-{
- struct bcm539x_data *bd =
- (struct bcm539x_data *)switch_get_drvdata(dev);
- int vid;
- u8_t rxbuf8;
- u32_t txbuf;
- int j;
- int ret;
-
- vid = simple_strtoul(buf, NULL, 0);
- if (!vid) {
- return -EINVAL;
- }
-
- /*
- * Disable this VLAN
- *
- * Go through the port-based vlan registers and clear the appropriate
- * ones out
- */
- for (j = 0; j < 9; j++) {
- u16_t rxbuf16;
- ret = bcm539x_read_16(bd, PAGE_VLAN, REG_VLAN_PTAG0 + (j << 1),
- &rxbuf16);
- if (ret) {
- return ret;
- }
- if (rxbuf16 == vid) {
- txbuf = 0;
- ret = bcm539x_write_16(bd, PAGE_VLAN,
- REG_VLAN_PTAG0 + (j << 1),
- txbuf);
- if (ret) {
- return ret;
- }
- }
- }
-
- /*
- * Write the VLAN table
- */
- txbuf = vid;
- ret = bcm539x_write_16(bd, PAGE_VTBL, REG_VTBL_INDX_5395, txbuf);
- if (ret) {
- return ret;
- }
-
- txbuf = 0;
- ret = bcm539x_write_32(bd, PAGE_VTBL, REG_VTBL_ENTRY_5395, txbuf);
- if (ret) {
- return ret;
- }
-
- txbuf = (1 << 7) | (0);
- ret = bcm539x_write_8(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395, txbuf);
- if (ret) {
- return ret;
- }
-
- /*
- * Wait for completion
- */
- for (j = 0; j < BCM539X_SPI_RETRIES; j++) {
- ret = bcm539x_read_bytes(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395,
- &rxbuf8, 1);
- if (ret) {
- return ret;
- }
- if (!(rxbuf8 & (1 << 7))) {
- break;
- }
- }
-
- if (j == BCM539X_SPI_RETRIES) {
- return -EIO;
- }
-
- return switch_remove_vlan_dir(dev, vid);
-}
-
-/*
- * bcm539x_handle_vlan_create_write
- */
-static int bcm539x_handle_vlan_create_write(struct switch_device *dev,
- char *buf, int inst)
-{
- int vid;
-
- vid = simple_strtoul(buf, NULL, 0);
- if (!vid) {
- return -EINVAL;
- }
-
- return switch_create_vlan_dir(dev, vid,
- bcm539x_switch_handlers_vlan_dir);
-}
-
-/*
- * bcm539x_handle_enable_read
- */
-static int bcm539x_handle_enable_read(struct switch_device *dev,
- char *buf, int inst)
-{
- struct bcm539x_data *bd =
- (struct bcm539x_data *)switch_get_drvdata(dev);
- u8_t rxbuf;
- int ret;
-
- ret = bcm539x_read_8(bd, PAGE_PORT_TC, REG_CTRL_MODE, &rxbuf);
- if (ret) {
- return ret;
- }
- rxbuf = (rxbuf & (1 << 1)) ? 1 : 0;
-
- return sprintf(buf, "%d\n", rxbuf);
-}
-
-/*
- * bcm539x_handle_enable_write
- */
-static int bcm539x_handle_enable_write(struct switch_device *dev,
- char *buf, int inst)
-{
- struct bcm539x_data *bd =
- (struct bcm539x_data *)switch_get_drvdata(dev);
-
- return bcm539x_set_mode(bd, buf[0] == '1');
-}
-
-/*
- * bcm539x_handle_enable_vlan_read
- */
-static int bcm539x_handle_enable_vlan_read(struct switch_device *dev,
- char *buf, int inst)
-{
- struct bcm539x_data *bd =
- (struct bcm539x_data *)switch_get_drvdata(dev);
- u8_t rxbuf;
- int ret;
-
- ret = bcm539x_read_8(bd, PAGE_VLAN, REG_VLAN_CTRL0, &rxbuf);
- if (ret) {
- return ret;
- }
- rxbuf = (rxbuf & (1 << 7)) ? 1 : 0;
-
- return sprintf(buf, "%d\n", rxbuf);
-}
-
-/*
- * bcm539x_handle_enable_vlan_write
- */
-static int bcm539x_handle_enable_vlan_write(struct switch_device *dev,
- char *buf, int inst)
-{
- struct bcm539x_data *bd =
- (struct bcm539x_data *)switch_get_drvdata(dev);
- int ret;
-
- /*
- * disable 802.1Q VLANs
- */
- if (buf[0] != '1') {
- ret = bcm539x_write_8(bd, PAGE_VLAN, REG_VLAN_CTRL0, 0);
- return ret;
- }
-
- /*
- * enable 802.1Q VLANs
- *
- * Enable 802.1Q | IVL learning
- */
- ret = bcm539x_write_8(bd, PAGE_VLAN, REG_VLAN_CTRL0,
- (1 << 7) | (3 << 5));
- if (ret) {
- return ret;
- }
-
- /*
- * RSV multicast fwd | RSV multicast chk
- */
- ret = bcm539x_write_8(bd, PAGE_VLAN, REG_VLAN_CTRL1,
- (1 << 2) | (1 << 3));
- if (ret) {
- return ret;
- }
-#if 0
- /*
- * Drop invalid VID
- */
- ret = bcm539x_write_16(bd, PAGE_VLAN, REG_VLAN_CTRL3, 0x00FF);
- if (ret) {
- return ret;
- }
-#endif
- return 0;
-}
-
-/*
- * bcm539x_handle_port_enable_read
- */
-static int bcm539x_handle_port_enable_read(struct switch_device *dev,
- char *buf, int inst)
-{
- return sprintf(buf, "%d\n", 1);
-}
-
-/*
- * bcm539x_handle_port_enable_write
- */
-static int bcm539x_handle_port_enable_write(struct switch_device *dev,
- char *buf, int inst)
-{
- /*
- * validate port
- */
- if (!(dev->port_mask[0] & (1 << inst))) {
- return -EIO;
- }
-
- if (buf[0] != '1') {
- printk(KERN_WARNING "switch port[%d] disabling is not supported\n", inst);
- }
- return 0;
-}
-
-/*
- * bcm539x_handle_port_state_read
- */
-static int bcm539x_handle_port_state_read(struct switch_device *dev,
- char *buf, int inst)
-{
- struct bcm539x_data *bd =
- (struct bcm539x_data *)switch_get_drvdata(dev);
- int ret;
- u16_t link;
-
- /*
- * validate port
- */
- if (!(dev->port_mask[0] & (1 << inst))) {
- return -EIO;
- }
-
- /*
- * check PHY link state - CPU port (port 8) is always up
- */
- ret = bcm539x_read_16(bd, PAGE_STATUS, REG_LINK_STATUS, &link);
- if (ret) {
- return ret;
- }
- link |= (1 << 8);
-
- return sprintf(buf, "%d\n", (link & (1 << inst)) ? 1 : 0);
-}
-
-/*
- * bcm539x_handle_port_media_read
- */
-static int bcm539x_handle_port_media_read(struct switch_device *dev,
- char *buf, int inst)
-{
- struct bcm539x_data *bd =
- (struct bcm539x_data *)switch_get_drvdata(dev);
- int ret;
- u16_t link, duplex;
- u32_t speed;
-
- /*
- * validate port
- */
- if (!(dev->port_mask[0] & (1 << inst))) {
- return -EIO;
- }
-
- /*
- * check PHY link state first - CPU port (port 8) is always up
- */
- ret = bcm539x_read_16(bd, PAGE_STATUS, REG_LINK_STATUS, &link);
- if (ret) {
- return ret;
- }
- link |= (1 << 8);
-
- if (!(link & (1 << inst))) {
- return sprintf(buf, "UNKNOWN\n");
- }
-
- /*
- * get link speeda dn duplex - CPU port (port 8) is 1000/full
- */
- ret = bcm539x_read_32(bd, PAGE_STATUS, 4, &speed);
- if (ret) {
- return ret;
- }
- speed |= (2 << 16);
- speed = (speed >> (2 * inst)) & 3;
-
- ret = bcm539x_read_16(bd, PAGE_STATUS, 8, &duplex);
- if (ret) {
- return ret;
- }
- duplex |= (1 << 8);
- duplex = (duplex >> inst) & 1;
-
- return sprintf(buf, "%d%cD\n",
- (speed == 0) ? 10 : ((speed == 1) ? 100 : 1000),
- duplex ? 'F' : 'H');
-}
-
-/*
- * bcm539x_handle_port_meida_write
- */
-static int bcm539x_handle_port_meida_write(struct switch_device *dev,
- char *buf, int inst)
-{
- struct bcm539x_data *bd =
- (struct bcm539x_data *)switch_get_drvdata(dev);
- int ret;
- u16_t ctrl_word, local_cap, local_giga_cap;
-
- /*
- * validate port (not for CPU port)
- */
- if (!(dev->port_mask[0] & (1 << inst) & ~(1 << 8))) {
- return -EIO;
- }
-
- /*
- * Get the maximum capability from status
- * SPI reg[0x00] = PHY[0x0] --- MII control
- * SPI reg[0x08] = PHY[0x4] --- MII local capability
- * SPI reg[0x12] = PHY[0x9] --- GMII control
- */
- ret = bcm539x_read_16(bd, REG_MII_PAGE + inst, (MII_ADVERTISE << 1), &local_cap);
- if (ret) {
- return ret;
- }
- ret = bcm539x_read_16(bd, REG_MII_PAGE + inst, (MII_CTRL1000 << 1), &local_giga_cap);
- if (ret) {
- return ret;
- }
-
- /* Configure to the requested speed */
- if (strncmp(buf, "1000FD", 6) == 0) {
- /* speed */
- local_cap &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL);
- local_cap &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL);
- local_giga_cap |= (ADVERTISE_1000HALF | ADVERTISE_1000FULL);
- /* duplex */
- } else if (strncmp(buf, "100FD", 5) == 0) {
- /* speed */
- local_cap &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL);
- local_cap |= (ADVERTISE_100HALF | ADVERTISE_100FULL);
- local_giga_cap &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
- /* duplex */
- local_cap &= ~(ADVERTISE_100HALF);
- } else if (strncmp(buf, "100HD", 5) == 0) {
- /* speed */
- local_cap &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL);
- local_cap |= (ADVERTISE_100HALF | ADVERTISE_100FULL);
- local_giga_cap &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
- /* duplex */
- local_cap &= ~(ADVERTISE_100FULL);
- } else if (strncmp(buf, "10FD", 4) == 0) {
- /* speed */
- local_cap |= (ADVERTISE_10HALF | ADVERTISE_10FULL);
- local_cap &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL);
- local_giga_cap &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
- /* duplex */
- local_cap &= ~(ADVERTISE_10HALF);
- } else if (strncmp(buf, "10HD", 4) == 0) {
- /* speed */
- local_cap |= (ADVERTISE_10HALF | ADVERTISE_10FULL);
- local_cap &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL);
- local_giga_cap &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
- /* duplex */
- local_cap &= ~(ADVERTISE_10FULL);
- } else if (strncmp(buf, "AUTO", 4) == 0) {
- /* speed */
- local_cap |= (ADVERTISE_10HALF | ADVERTISE_10FULL);
- local_cap |= (ADVERTISE_100HALF | ADVERTISE_100FULL);
- local_giga_cap |= (ADVERTISE_1000HALF | ADVERTISE_1000FULL);
- } else {
- return -EINVAL;
- }
-
- /* Active PHY with the requested speed for auto-negotiation */
- ret = bcm539x_write_16(bd, REG_MII_PAGE + inst, (MII_ADVERTISE << 1), local_cap);
- if (ret) {
- return ret;
- }
- ret = bcm539x_write_16(bd, REG_MII_PAGE + inst, (MII_CTRL1000 << 1), local_giga_cap);
- if (ret) {
- return ret;
- }
-
- ret = bcm539x_read_16(bd, REG_MII_PAGE + inst, (MII_BMCR << 1), &ctrl_word);
- if (ret) {
- return ret;
- }
- ctrl_word |= (BMCR_ANENABLE | BMCR_ANRESTART);
- ret = bcm539x_write_16(bd, REG_MII_PAGE + inst, (MII_BMCR << 1), ctrl_word);
- if (ret) {
- return ret;
- }
-
- return 0;
-}
-
-/*
- * proc_fs entries for this switch
- */
-static const struct switch_handler bcm539x_switch_handlers[] = {
- {
- .name = "enable",
- .read = bcm539x_handle_enable_read,
- .write = bcm539x_handle_enable_write,
- },
- {
- .name = "enable_vlan",
- .read = bcm539x_handle_enable_vlan_read,
- .write = bcm539x_handle_enable_vlan_write,
- },
- {
- .name = "reset",
- .write = bcm539x_handle_reset,
- },
- {
- },
-};
-
-/*
- * Handlers for <this_driver>/vlan
- */
-static const struct switch_handler bcm539x_switch_handlers_vlan[] = {
- {
- .name = "delete",
- .write = bcm539x_handle_vlan_delete_write,
- },
- {
- .name = "create",
- .write = bcm539x_handle_vlan_create_write,
- },
- {
- },
-};
-
-/*
- * Handlers for <this_driver>/port/<port number>
- */
-static const struct switch_handler bcm539x_switch_handlers_port[] = {
- {
- .name = "enable",
- .read = bcm539x_handle_port_enable_read,
- .write = bcm539x_handle_port_enable_write,
- },
- {
- .name = "state",
- .read = bcm539x_handle_port_state_read,
- },
- {
- .name = "media",
- .read = bcm539x_handle_port_media_read,
- .write = bcm539x_handle_port_meida_write,
- },
- {
- },
-};
-
-/*
- * bcm539x_probe
- */
-static int __devinit bcm539x_probe(struct spi_device *spi)
-{
- struct bcm539x_data *bd;
- struct switch_core_platform_data *pdata;
- struct switch_device *switch_dev = NULL;
- int i, ret;
- u8_t txbuf[2];
-
- pdata = spi->dev.platform_data;
- if (!pdata) {
- return -EINVAL;
- }
-
- ret = spi_setup(spi);
- if (ret < 0) {
- return ret;
- }
-
- /*
- * Reset the chip if requested
- */
- if (pdata->flags & SWITCH_DEV_FLAG_HW_RESET) {
- ret = gpio_request(pdata->pin_reset, "switch-bcm539x-reset");
- if (ret) {
- printk(KERN_WARNING "Could not request reset\n");
- return -EINVAL;
- }
-
- gpio_direction_output(pdata->pin_reset, 0);
- udelay(10);
- gpio_set_value(pdata->pin_reset, 1);
- udelay(20);
- }
-
- /*
- * Allocate our private data structure
- */
- bd = kzalloc(sizeof(struct bcm539x_data), GFP_KERNEL);
- if (!bd) {
- return -ENOMEM;
- }
-
- dev_set_drvdata(&spi->dev, bd);
- bd->pdata = pdata;
- bd->spi = spi;
- bd->last_page = 0xFF;
-
- /*
- * First perform SW reset if needed
- */
- if (pdata->flags & SWITCH_DEV_FLAG_SW_RESET) {
- txbuf[0] = (1 << 7) | (1 << 4);
- ret = bcm539x_write_bytes(bd, PAGE_PORT_TC,
- REG_CTRL_SRST, txbuf, 1);
- if (ret) {
- goto fail;
- }
-
- udelay(20);
-
- txbuf[0] = 0;
- ret = bcm539x_write_bytes(bd, PAGE_PORT_TC,
- REG_CTRL_SRST, txbuf, 1);
- if (ret) {
- goto fail;
- }
- }
-
- /*
- * See if we can see the chip
- */
- for (i = 0; i < 10; i++) {
- ret = bcm539x_read_bytes(bd, PAGE_MMR, REG_DEVICE_ID,
- &bd->device_id, 1);
- if (!ret) {
- break;
- }
- }
- if (ret) {
- goto fail;
- }
-
- /*
- * We only support 5395, 5397, 5398
- */
- if ((bd->device_id != 0x95) && (bd->device_id != 0x97) &&
- (bd->device_id != 0x98)) {
- ret = -ENODEV;
- goto fail;
- }
-
- /*
- * Override CPU port config: fixed link @1000 with flow control
- */
- ret = bcm539x_read_8(bd, PAGE_PORT_TC, REG_CTRL_MIIPO, txbuf);
- bcm539x_write_8(bd, PAGE_PORT_TC, REG_CTRL_MIIPO, 0xbb); // Override IMP port config
- printk("Broadcom SW CPU port setting: 0x%x -> 0xbb\n", txbuf[0]);
-
- /*
- * Setup the switch driver structure
- */
- switch_dev = switch_alloc();
- if (!switch_dev) {
- ret = -ENOMEM;
- goto fail;
- }
- switch_dev->name = pdata->name;
-
- switch_dev->ports = (bd->device_id == 0x98) ? 9 : 6;
- switch_dev->port_mask[0] = (bd->device_id == 0x98) ? 0x1FF : 0x11F;
- switch_dev->driver_handlers = bcm539x_switch_handlers;
- switch_dev->reg_handlers = NULL;
- switch_dev->vlan_handlers = bcm539x_switch_handlers_vlan;
- switch_dev->port_handlers = bcm539x_switch_handlers_port;
-
- bd->switch_dev = switch_dev;
- switch_set_drvdata(switch_dev, (void *)bd);
-
- ret = switch_register(bd->switch_dev);
- if (ret < 0) {
- goto fail;
- }
-
- printk(KERN_INFO "bcm53%02x switch chip initialized\n", bd->device_id);
-
- return ret;
-
-fail:
- if (switch_dev) {
- switch_release(switch_dev);
- }
- dev_set_drvdata(&spi->dev, NULL);
- kfree(bd);
- return ret;
-}
-
-static int __attribute__((unused)) bcm539x_remove(struct spi_device *spi)
-{
- struct bcm539x_data *bd;
-
- bd = dev_get_drvdata(&spi->dev);
-
- if (bd->pdata->flags & SWITCH_DEV_FLAG_HW_RESET) {
- gpio_free(bd->pdata->pin_reset);
- }
-
- if (bd->switch_dev) {
- switch_unregister(bd->switch_dev);
- switch_release(bd->switch_dev);
- }
-
- dev_set_drvdata(&spi->dev, NULL);
-
- kfree(bd);
-
- return 0;
-}
-
-static struct spi_driver bcm539x_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
- .probe = bcm539x_probe,
- .remove = __devexit_p(bcm539x_remove),
-};
-
-static int __init bcm539x_init(void)
-{
- return spi_register_driver(&bcm539x_driver);
-}
-
-module_init(bcm539x_init);
-
-static void __exit bcm539x_exit(void)
-{
- spi_unregister_driver(&bcm539x_driver);
-}
-module_exit(bcm539x_exit);
-
-MODULE_AUTHOR("Pat Tjin");
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("bcm539x SPI switch chip driver");
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/switch-core.c
- * Ubicom32 architecture switch and /proc/switch/... implementation.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 2005 Felix Fietkau <openwrt@nbd.name>
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- *
- * Basic doc of driver's /proc interface:
- * /proc/switch/<interface>/
- * registers: read-only
- * counters: read-only
- * reset: write causes hardware reset
- * enable: "0", "1"
- * enable_vlan: "0", "1"
- * port/<port-number>/
- * enabled: "0", "1"
- * link state: read-only
- * media: "AUTO", "1000FD", "100FD", "100HD", "10FD", "10HD"
- * vlan/<port-number>/
- * ports: same syntax as for nvram's vlan*ports (eg. "1 2 3 4 5*")
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/uaccess.h>
-#include <linux/ctype.h>
-#include <linux/proc_fs.h>
-#include <linux/list.h>
-#include <linux/rwsem.h>
-#include <linux/device.h>
-
-#include "switch-core.h"
-
-/*
- * Pointer to the root of our filesystem
- */
-static struct proc_dir_entry *switch_root;
-
-/*
- * Lock used to manage access to the switch list
- */
-DECLARE_RWSEM(switch_list_lock);
-EXPORT_SYMBOL_GPL(switch_list_lock);
-
-/*
- * List of switches we are managing
- */
-LIST_HEAD(switch_list);
-EXPORT_SYMBOL_GPL(switch_list);
-
-/*
- * List of handlers we have
- */
-LIST_HEAD(switch_handler_list);
-EXPORT_SYMBOL_GPL(switch_handler_list);
-
-/*
- * Keep track of all the handlers we added
- */
-struct switch_handler_entry {
- struct list_head node;
- struct proc_dir_entry *parent;
- struct switch_device *dev;
- const struct switch_handler *handler;
- int inst;
-};
-
-/*
- * Keep track of all VLAN dirs we created
- */
-struct switch_vlan_entry {
- struct list_head node;
- struct proc_dir_entry *pde;
- int vlan_id;
- const struct switch_handler *handlers;
-};
-
-/*
- * switch_parse_vlan_ports
- * Parse the vlan properties written to <driver>/vlan/<vlan_id>/ports
- */
-void switch_parse_vlan_ports(struct switch_device *switch_dev,
- char *buf, u32_t *untag,
- u32_t *ports, u32_t *def)
-{
- u32_t tag = 0;
- *untag = 0;
- *ports = 0;
- *def = 0;
-
-
- /*
- * Skip any leading spaces
- */
- while (isspace(*buf)) {
- buf++;
- }
-
- /*
- * Parse out the string
- */
- while (*buf) {
- u32_t port = simple_strtoul(buf, &buf, 10);
- u32_t mask = (1 << port);
-
- /*
- * Parse out any flags
- */
- while (*buf && !isspace(*buf)) {
- switch (*buf++) {
- case 't':
- tag |= mask;
- break;
- case '*':
- *def |= mask;
- break;
- }
- }
- *ports |= mask;
-
- /*
- * Skip any spaces
- */
- while (isspace(*buf)) {
- buf++;
- }
- }
-
- *untag = ~tag & *ports;
-}
-
-/*
- * switch_proc_read
- * Handle reads from the procfs, dispatches the driver specific handler
- */
-static ssize_t switch_proc_read(struct file *file, char *buf, size_t count,
- loff_t *ppos)
-{
- struct proc_dir_entry *pde = PDE(file->f_dentry->d_inode);
- char *page;
- int len = 0;
-
- page = kmalloc(SWITCH_MAX_BUFSZ, GFP_KERNEL);
- if (!page) {
- return -ENOBUFS;
- }
-
- if (pde->data != NULL) {
- struct switch_handler_entry *she =
- (struct switch_handler_entry *)pde->data;
- if (she->handler->read) {
- len += she->handler->read(she->dev, page + len,
- she->inst);
- }
- }
- len += 1;
-
- if (*ppos < len) {
- len = min_t(int, len - *ppos, count);
- if (copy_to_user(buf, (page + *ppos), len)) {
- kfree(page);
- return -EFAULT;
- }
- *ppos += len;
- } else {
- len = 0;
- }
-
- kfree(page);
-
- return len;
-}
-
-/*
- * switch_proc_write
- * Handle writes from the procfs, dispatches the driver specific handler
- */
-static ssize_t switch_proc_write(struct file *file, const char *buf,
- size_t count, loff_t *data)
-{
- struct proc_dir_entry *pde = PDE(file->f_dentry->d_inode);
- char *page;
- int ret = -EINVAL;
-
- page = kmalloc(count + 1, GFP_KERNEL);
- if (page == NULL)
- return -ENOBUFS;
-
- if (copy_from_user(page, buf, count)) {
- kfree(page);
- return -EINVAL;
- }
- page[count] = 0;
-
- if (pde->data != NULL) {
- struct switch_handler_entry *she =
- (struct switch_handler_entry *)pde->data;
- if (she->handler->write) {
- ret = she->handler->write(she->dev, page, she->inst);
- if (ret >= 0) {
- ret = count;
- }
- }
- }
-
- kfree(page);
- return ret;
-}
-
-/*
- * File operations for the proc_fs, we must cast here since proc_fs' definitions
- * differ from file_operations definitions.
- */
-static struct file_operations switch_proc_fops = {
- .read = (ssize_t (*) (struct file *, char __user *,
- size_t, loff_t *))switch_proc_read,
- .write = (ssize_t (*) (struct file *, const char __user *,
- size_t, loff_t *))switch_proc_write,
-};
-
-/*
- * switch_add_handler
- */
-static int switch_add_handler(struct switch_device *switch_dev,
- struct proc_dir_entry *parent,
- const struct switch_handler *handler,
- int inst)
-{
- struct switch_handler_entry *she;
- struct proc_dir_entry *pde;
- int mode;
-
- she = (struct switch_handler_entry *)
- kzalloc(sizeof(struct switch_handler_entry), GFP_KERNEL);
- if (!she) {
- return -ENOMEM;
- }
-
- INIT_LIST_HEAD(&she->node);
- she->parent = parent;
- she->dev = switch_dev;
- she->inst = inst;
- she->handler = handler;
- list_add(&she->node, &switch_dev->handlers);
-
- mode = 0;
- if (handler->read != NULL) {
- mode |= S_IRUSR;
- }
- if (handler->write != NULL) {
- mode |= S_IWUSR;
- }
-
- pde = create_proc_entry(handler->name, mode, parent);
- if (!pde) {
- kfree(she);
- printk("Failed to create node '%s' in parent %p\n",
- handler->name, parent);
- return -ENOMEM;
- }
- pde->data = (void *)she;
- pde->proc_fops = &switch_proc_fops;
-
- return 0;
-}
-
-/*
- * switch_add_handlers
- */
-static int switch_add_handlers(struct switch_device *switch_dev,
- struct proc_dir_entry *parent,
- const struct switch_handler *handlers,
- int inst)
-{
- while (handlers->name) {
- int ret = switch_add_handler(switch_dev,
- parent, handlers, inst);
- if (ret) {
- return ret;
- }
- handlers++;
- }
-
- return 0;
-}
-
-/*
- * switch_remove_vlan_dirs
- * Removes all vlan directories
- *
- * Assumes all vlan directories are empty, should be called after
- * switch_remove_handlers
- */
-static void switch_remove_vlan_dirs(struct switch_device *switch_dev)
-{
- struct list_head *pos;
- struct list_head *tmp;
- struct switch_vlan_entry *sve;
-
- list_for_each_safe(pos, tmp, &switch_dev->vlan_dirs) {
- sve = list_entry(pos, struct switch_vlan_entry, node);
- list_del(pos);
- remove_proc_entry(sve->pde->name, switch_dev->vlan_dir);
- kfree(sve);
- }
-}
-
-/*
- * switch_remove_handlers
- * Removes all handlers registered to the given switch_device
- */
-static void switch_remove_handlers(struct switch_device *switch_dev)
-{
- struct list_head *pos;
- struct list_head *tmp;
- struct switch_handler_entry *she;
-
- list_for_each_safe(pos, tmp, &switch_dev->handlers) {
- she = list_entry(pos, struct switch_handler_entry, node);
- list_del(pos);
- remove_proc_entry(she->handler->name, she->parent);
- kfree(she);
- }
-}
-
-/*
- * switch_unregister_proc_nodes
- * Unregisters all proc nodes related to switch_dev
- */
-void switch_unregister_proc_nodes(struct switch_device *switch_dev)
-{
- switch_remove_handlers(switch_dev);
-
- if (switch_dev->port_dirs) {
- int i;
-
- for (i = 0; i < switch_dev->ports; i++) {
- if (switch_dev->port_dirs[i]) {
- remove_proc_entry(
- switch_dev->port_dirs[i]->name,
- switch_dev->port_dir);
- }
- }
- }
-
- if (switch_dev->port_dir) {
- remove_proc_entry("port", switch_dev->driver_dir);
- switch_dev->port_dir = NULL;
- }
-
- if (switch_dev->reg_dir) {
- remove_proc_entry("reg", switch_dev->reg_dir);
- switch_dev->reg_dir = NULL;
- }
-
- if (switch_dev->vlan_dir) {
- switch_remove_vlan_dirs(switch_dev);
- remove_proc_entry("vlan", switch_dev->driver_dir);
- switch_dev->vlan_dir = NULL;
- }
-
- if (switch_dev->driver_dir) {
- remove_proc_entry(switch_dev->name, switch_root);
- switch_dev->driver_dir = NULL;
- }
-}
-
-/*
- * switch_remove_vlan_dir
- * Removes vlan dir in switch/<switch_driver>/vlan/<vlan_id>
- */
-int switch_remove_vlan_dir(struct switch_device *switch_dev, int vlan_id)
-{
- struct list_head *pos;
- struct switch_vlan_entry *sve = NULL;
-
- list_for_each(pos, &switch_dev->vlan_dirs) {
- struct switch_vlan_entry *tmp =
- list_entry(pos, struct switch_vlan_entry, node);
- if (tmp->vlan_id == vlan_id) {
- sve = tmp;
- break;
- }
- }
-
- if (!sve) {
- return -ENOENT;
- }
-
- /*
- * Remove it from the list
- */
- list_del(pos);
-
- /*
- * Remove the handlers
- */
- while (sve->handlers->name) {
- remove_proc_entry(sve->handlers->name, sve->pde);
- sve->handlers++;
- }
-
- /*
- * Remove the proc entry for the <vlan_id> dir
- */
- remove_proc_entry(sve->pde->name, switch_dev->vlan_dir);
-
- kfree(sve);
-
- return 0;
-}
-
-/*
- * switch_create_vlan_dir
- * Creates vlan dir in switch/<switch_driver>/vlan/<vlan_id>
- */
-int switch_create_vlan_dir(struct switch_device *switch_dev,
- int vlan_id, const struct switch_handler *handlers)
-{
- char s[14];
- struct proc_dir_entry *pde = NULL;
- struct switch_vlan_entry *sve = NULL;
- int ret;
- struct list_head *pos;
-
- /*
- * Check to see if it exists already
- */
- list_for_each(pos, &switch_dev->vlan_dirs) {
- sve = list_entry(pos, struct switch_vlan_entry, node);
- if (sve->vlan_id == vlan_id) {
- return -EEXIST;
- }
- }
- sve = NULL;
-
- /*
- * Create the vlan directory if we didn't have it before
- */
- if (!switch_dev->vlan_dir) {
- switch_dev->vlan_dir = proc_mkdir("vlan",
- switch_dev->driver_dir);
- if (!switch_dev->vlan_dir) {
- goto fail;
- }
- if (switch_dev->vlan_handlers) {
- ret = switch_add_handlers(switch_dev,
- switch_dev->vlan_dir,
- switch_dev->vlan_handlers, 0);
- if (ret) {
- goto fail;
- }
- }
- }
-
- /*
- * Create the vlan_id directory
- */
- snprintf(s, 14, "%d", vlan_id);
- pde = proc_mkdir(s, switch_dev->vlan_dir);
- if (!pde) {
- goto fail;
- }
-
- /*
- * Create the handlers for this vlan
- */
- if (handlers) {
- ret = switch_add_handlers(switch_dev, pde, handlers, vlan_id);
- if (ret) {
- goto fail;
- }
- }
-
- /*
- * Keep track of all the switch vlan entries created
- */
- sve = (struct switch_vlan_entry *)
- kzalloc(sizeof(struct switch_vlan_entry), GFP_KERNEL);
- if (!sve) {
- goto fail;
- }
- INIT_LIST_HEAD(&sve->node);
- sve->handlers = handlers;
- sve->vlan_id = vlan_id;
- sve->pde = pde;
- list_add(&sve->node, &switch_dev->vlan_dirs);
-
- return 0;
-
-fail:
- if (sve) {
- kfree(sve);
- }
-
- if (pde) {
- /*
- * Remove any proc entries we might have created
- */
- while (handlers->name) {
- remove_proc_entry(handlers->name, pde);
- handlers++;
- }
-
- remove_proc_entry(s, switch_dev->driver_dir);
- }
-
- return -ENOMEM;
-}
-
-/*
- * switch_register_proc_nodes
- */
-int switch_register_proc_nodes(struct switch_device *switch_dev)
-{
- int i;
- int n;
-
- switch_dev->port_dirs = kzalloc(switch_dev->ports *
- sizeof(struct proc_dir_entry *),
- GFP_KERNEL);
- if (!switch_dev->port_dirs) {
- return -ENOMEM;
- }
-
- /*
- * Create a new proc entry for this switch
- */
- switch_dev->driver_dir = proc_mkdir(switch_dev->name, switch_root);
- if (!switch_dev->driver_dir) {
- goto fail;
- }
- if (switch_dev->driver_handlers) {
- switch_add_handlers(switch_dev,
- switch_dev->driver_dir,
- switch_dev->driver_handlers,
- 0);
- }
-
- /*
- * Create the ports
- */
- switch_dev->port_dir = proc_mkdir("port", switch_dev->driver_dir);
- if (!switch_dev->port_dir) {
- goto fail;
- }
- for (n = 0, i = 0; i < (SWITCH_PORT_MASK_SIZE * 32); i++) {
- if (switch_dev->port_mask[i / 32] & (1 << i % 32)) {
- char s[14];
-
- snprintf(s, 14, "%d", i);
- switch_dev->port_dirs[n] =
- proc_mkdir(s, switch_dev->port_dir);
- if (!switch_dev->port_dirs[n]) {
- goto fail;
- }
- if (switch_dev->port_handlers) {
- switch_add_handlers(switch_dev,
- switch_dev->port_dirs[n],
- switch_dev->port_handlers,
- i);
- }
- n++;
- }
- }
-
- /*
- * Create the register directory for switch register access.
- */
- if (switch_dev->reg_handlers) {
- switch_dev->reg_dir = proc_mkdir("reg", switch_dev->driver_dir);
- if (!switch_dev->reg_dir) {
- goto fail;
- }
-
- switch_add_handlers(switch_dev,
- switch_dev->reg_dir,
- switch_dev->reg_handlers,
- 0);
- }
-
- /*
- * Create the vlan directory
- */
- if (switch_dev->vlan_handlers) {
- switch_dev->vlan_dir = proc_mkdir("vlan",
- switch_dev->driver_dir);
- if (!switch_dev->vlan_dir) {
- goto fail;
- }
- if (switch_dev->vlan_handlers) {
- switch_add_handlers(switch_dev,
- switch_dev->vlan_dir,
- switch_dev->vlan_handlers,
- 0);
- }
- }
-
- return 0;
-
-fail:
- switch_unregister_proc_nodes(switch_dev);
- return -ENOMEM;
-}
-
-/*
- * switch_release
- */
-void switch_release(struct switch_device *switch_dev)
-{
- kfree(switch_dev);
-}
-
-/*
- * switch_alloc
- */
-struct switch_device *switch_alloc(void)
-{
- struct switch_device *switch_dev =
- kzalloc(sizeof(struct switch_device),
- GFP_KERNEL);
- INIT_LIST_HEAD(&switch_dev->node);
- INIT_LIST_HEAD(&switch_dev->vlan_dirs);
- INIT_LIST_HEAD(&switch_dev->handlers);
- return switch_dev;
-}
-
-/*
- * switch_register
- */
-int switch_register(struct switch_device *switch_dev)
-{
- int ret;
- int i;
-
- /*
- * Make sure that the number of ports and the port mask make sense
- */
- for (ret = 0, i = 0; i < (SWITCH_PORT_MASK_SIZE * 32); i++) {
- if (switch_dev->port_mask[i / 32] & (1 << i % 32)) {
- ret++;
- }
- }
- if (ret > switch_dev->ports) {
- return -EINVAL;
- }
-
- /*
- * Create the /proc entries
- */
- ret = switch_register_proc_nodes(switch_dev);
- if (ret) {
- return ret;
- }
-
- /*
- * Add it to the list of switches
- */
- down_write(&switch_list_lock);
- list_add_tail(&switch_dev->node, &switch_list);
- up_write(&switch_list_lock);
-
- printk(KERN_INFO "Registered switch device: %s\n", switch_dev->name);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(switch_register);
-
-/*
- * switch_unregister
- * Unregisters a previously registered switch_device object
- */
-void switch_unregister(struct switch_device *switch_dev)
-{
- /*
- * remove the proc entries
- */
- switch_unregister_proc_nodes(switch_dev);
-
- /*
- * Remove it from the list of switches
- */
- down_write(&switch_list_lock);
- list_del(&switch_dev->node);
- up_write(&switch_list_lock);
-
- printk(KERN_INFO "Unregistered switch device: %s\n", switch_dev->name);
-}
-EXPORT_SYMBOL_GPL(switch_unregister);
-
-/*
- * switch_init
- */
-static int __init switch_init(void)
-{
- switch_root = proc_mkdir("switch", NULL);
- if (!switch_root) {
- printk(KERN_WARNING "Failed to make root switch node\n");
- return -ENODEV;
- }
- return 0;
-}
-module_init(switch_init);
-
-/*
- * switch_exit
- */
-static void __exit switch_exit(void)
-{
- remove_proc_entry("switch", NULL);
-}
-module_exit(switch_exit);
-
-MODULE_AUTHOR("Patrick Tjin");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Ethernet Switch Class Interface");
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/switch-core.h
- * Private data for the switch module
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _SWITCH_CORE_H_
-#define _SWITCH_CORE_H_
-
-struct switch_handler_entry;
-struct switch_vlan_entry;
-
-#define SWITCH_PORT_MASK_SIZE 2
-
-struct switch_device {
- struct list_head node;
-
- const char *name;
- void *drvdata;
-
- u8_t ports;
-
- struct proc_dir_entry *driver_dir;
- const struct switch_handler *driver_handlers;
-
- struct proc_dir_entry *port_dir;
- struct proc_dir_entry **port_dirs;
- const struct switch_handler *port_handlers;
-
- struct proc_dir_entry *reg_dir;
- const struct switch_handler *reg_handlers;
-
- struct proc_dir_entry *vlan_dir;
- const struct switch_handler *vlan_handlers;
- struct list_head vlan_dirs;
-
- struct list_head handlers;
-
- u32_t port_mask[SWITCH_PORT_MASK_SIZE];
-};
-
-typedef int (*switch_handler_fn)(struct switch_device *, char *buf, int nr);
-struct switch_handler {
- const char *name;
-
- switch_handler_fn read;
- switch_handler_fn write;
-};
-
-#define SWITCH_MAX_BUFSZ 4096
-
-static inline void switch_set_drvdata(struct switch_device *switch_dev, void *drvdata)
-{
- switch_dev->drvdata = drvdata;
-}
-
-static inline void *switch_get_drvdata(struct switch_device *switch_dev)
-{
- return switch_dev->drvdata;
-}
-
-extern int switch_create_vlan_dir(struct switch_device *switch_dev, int vlan_id, const struct switch_handler *handlers);
-extern int switch_remove_vlan_dir(struct switch_device *switch_dev, int vlan_id);
-extern void switch_parse_vlan_ports(struct switch_device *switch_dev, char *buf, u32_t *untag, u32_t *ports, u32_t *def);
-
-extern void switch_release(struct switch_device *switch_dev);
-extern struct switch_device *switch_alloc(void);
-extern int switch_register(struct switch_device *switch_dev);
-extern void switch_unregister(struct switch_device *switch_dev);
-
-#endif
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/ubi32-gpio.c
- * Ubicom gpio driver
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/version.h>
-
-#if defined(CONFIG_PROC_FS)
-#include <linux/proc_fs.h>
-#endif
-
-#include <linux/io.h>
-#include <asm/ip5000.h>
-#include <linux/gpio.h>
-
-#define UBI_GPIO_CHECK_RANGE 0 /* !0 enables range checking */
-
-
-/*
- * Each I/O port can be configured to operate in one of several
- * functional modes. One of these modes is GPIO, which causes the
- * entire port to function as a GPIO port. Since the various port
- * registers serve the system with other important functions, such as
- * ethernet, serial, USB, etc., it isn't advantageous to set any of
- * the ports to be entirely dedicated for GPIO use. The processor
- * alternatively allows individual bits of a port to be assigned to be
- * used as GPIO independently from the overall port function. This
- * bit-by-bit assignment is selected by setting the corresponding bit
- * in the port's gpio_mask register. When set, the selected bit is
- * then enabled as a GPIO. If the corresponding bit is set in the
- * gpio_ctl register of the port, the bit is configured as a GPIO
- * output. Otherwise, it is an input.
- *
- * NOTE: This driver uses the bit-by-bit GPIO function assignment
- * exclusively and *never* sets the port function registers to the
- * GPIO function.
- *
- * GPIO is not the main function of any of the I/O ports. The port
- * bit widths are variable from one port to the next, determined by
- * the more common I/O functions of the ports. For simplicity, this
- * driver assumes all the ports are 32 bits wide regardless of the
- * real bit width of the port. GPIO bits are numbered from zero to
- * MAX_UBICOM_GPIOS. Within a port, the least significant bit is
- * numbered bit zero, the most significant is bit 31. Since the ports
- * are considered logically contiguous, GPIO #32 is the zeroth bit in
- * port #1, and so on. Due to the hardware definition, there are
- * large gaps in the GPIO numbers representing real pins.
- *
- * NOTE: It is up to the programmer to refer to the processor data
- * sheet to determine which bits in which ports can be accessed and
- * used for GPIO.
- *
- */
-
-
-/* There are 9 ports, A through I. Not all 32 bits in each
- * port can be a GPIO, but we pretend they are. Its up to the
- * programmer to refer to the processor data sheet.
- */
-#define MAX_UBICOM_GPIOS (9 * 32) /* ARCH_NR_GPIOS */
-#define NUM_GPIO_PORTS (gpio_bank(MAX_UBICOM_GPIOS))
-
-
-/* GPIO reservation bit map array */
-static int reserved_gpio_map[NUM_GPIO_PORTS];
-
-
-/* Array of hardware io_port addresses */
-static struct ubicom32_io_port *gpio_bank_addr[NUM_GPIO_PORTS] =
-{
- UBICOM32_IO_PORT(RA),
- UBICOM32_IO_PORT(RB),
- UBICOM32_IO_PORT(RC),
- UBICOM32_IO_PORT(RD),
- UBICOM32_IO_PORT(RE),
- UBICOM32_IO_PORT(RF),
- UBICOM32_IO_PORT(RG),
- UBICOM32_IO_PORT(RH),
- UBICOM32_IO_PORT(RI)
-};
-
-
-struct ubi_gpio_chip {
- /*
- * Right now, nothing else lives here.
- */
- struct gpio_chip gpio_chip;
-};
-
-
-#if UBI_GPIO_CHECK_RANGE
-inline int check_gpio(unsigned gpio)
-{
- if (gpio >= MAX_UBICOM_GPIOS)
- return -EINVAL;
- return 0;
-}
-#else
-#define check_gpio(n) (0)
-#endif
-
-/*
- * ubi_gpio_get_port
- * Get the IO port associated with a certain gpio
- */
-struct ubicom32_io_port *ubi_gpio_get_port(unsigned gpio)
-{
- if (gpio_bank(gpio) > NUM_GPIO_PORTS) {
- return NULL;
- }
- return gpio_bank_addr[gpio_bank(gpio)];
-}
-
-/*
- * ubi_gpio_error()
- */
-static void ubi_gpio_error(unsigned gpio)
-{
- printk(KERN_ERR "ubicom-gpio: GPIO %d wasn't requested!\n", gpio);
-}
-
-/*
- * ubi_port_setup()
- */
-static void ubi_port_setup(unsigned gpio, unsigned short usage)
-{
- if (!check_gpio(gpio)) {
- if (usage) {
- UBICOM32_GPIO_ENABLE(gpio);
- } else {
- UBICOM32_GPIO_DISABLE(gpio);
- }
- }
-}
-
-/*
- * ubi_gpio_request()
- */
-static int ubi_gpio_request(struct gpio_chip *chip, unsigned gpio)
-{
- unsigned long flags;
-
- if (check_gpio(gpio) < 0)
- return -EINVAL;
-
- local_irq_save(flags);
-
- if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- printk(KERN_ERR "ubi-gpio: GPIO %d is already reserved!\n",
- gpio);
- local_irq_restore(flags);
- return -EBUSY;
- }
-
- reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
-
- ubi_port_setup(gpio, 1);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-/*
- * ubi_gpio_free()
- */
-static void ubi_gpio_free(struct gpio_chip *chip, unsigned gpio)
-{
- unsigned long flags;
-
- if (check_gpio(gpio) < 0)
- return;
-
- local_irq_save(flags);
-
- if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
- ubi_gpio_error(gpio);
- local_irq_restore(flags);
- return;
- }
-
- /* Assert the pin is no longer claimed */
- reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
-
- /* Revert port bit to use specified by port->function */
- ubi_port_setup(gpio, 0);
-
- local_irq_restore(flags);
-}
-
-/*
- * ubi_gpio_direction_input()
- */
-static int ubi_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
- unsigned long flags;
-
- if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- ubi_gpio_error(gpio);
- return -EINVAL;
- }
-
- local_irq_save(flags);
-
- /* Configure pin as gpio */
- ubi_port_setup(gpio, 1);
-
- /* Assert pin is an input */
- UBICOM32_GPIO_SET_PIN_INPUT(gpio);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-
-/*
- * ubi_gpio_direction_output()
- */
-static int ubi_gpio_direction_output(struct gpio_chip *chip,
- unsigned gpio, int value)
-{
- unsigned long flags;
-
- if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- ubi_gpio_error(gpio);
- return -EINVAL;
- }
-
- local_irq_save(flags);
-
- /* Configure pin as gpio and set initial value in gpio_out register
- * so that when we enable it as an output, it will have the correct
- * initial value.
- */
- ubi_port_setup(gpio, 1);
- if (value) {
- UBICOM32_GPIO_SET_PIN_HIGH(gpio);
- } else {
- UBICOM32_GPIO_SET_PIN_LOW(gpio);
- }
-
- /* Enable the pin as an output */
- UBICOM32_GPIO_SET_PIN_OUTPUT(gpio);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-
-/*
- * ubi_gpio_get_value()
- */
-static int ubi_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
-{
- return 0 != (gpio_bank_addr[gpio_bank(gpio)]->gpio_in & gpio_bit(gpio));
-}
-
-
-/*
- * ubi_gpio_set_value()
- */
-static void ubi_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
- int arg)
-{
- unsigned long flags;
- local_irq_save(flags);
-
- if (arg) {
- UBICOM32_GPIO_SET_PIN_HIGH(gpio);
- } else {
- UBICOM32_GPIO_SET_PIN_LOW(gpio);
- }
-
- local_irq_restore(flags);
-}
-
-
-/*
- * ubi_gpio_to_irq()
- */
-static int ubi_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-{
- return gpio_to_irq(gpio);
-}
-
-
-/*
- * ubi_gpio_init()
- */
-int __init ubi_gpio_init(void)
-{
- int k;
- int status;
- struct ubi_gpio_chip *chip;
- struct gpio_chip *gc;
-
- printk(KERN_INFO "Ubicom GPIO Controller\n");
-
- chip = kzalloc(sizeof(struct ubi_gpio_chip), GFP_KERNEL);
- if (chip == NULL)
- return -ENOMEM;
-
- gc = &chip->gpio_chip;
- gc->request = ubi_gpio_request;
- gc->free = ubi_gpio_free;
- gc->to_irq = ubi_gpio_to_irq;
- gc->direction_input = ubi_gpio_direction_input;
- gc->direction_output = ubi_gpio_direction_output;
- gc->get = ubi_gpio_get_value;
- gc->set = ubi_gpio_set_value;
- gc->can_sleep = 0;
- gc->base = 0;
- gc->ngpio = MAX_UBICOM_GPIOS; /* ARCH_NR_GPIOS - 1 */
- gc->label = "ubi_gpio";
-
- status = gpiochip_add(gc);
- if (status != 0) {
- kfree(chip);
- return status;
- }
-
- /* Assert all pins are free */
- for (k = 0; k < NUM_GPIO_PORTS; k++) {
- reserved_gpio_map[k] = 0;
- }
-
- return 0;
-}
-
-#if defined(CONFIG_PROC_FS)
-/*
- * ubi_get_gpio_dir()
- */
-static int ubi_get_gpio_dir(unsigned gpio)
-{
- if (gpio_bank_addr[gpio_bank(gpio)]->gpio_ctl & gpio_bit(gpio))
- return 1;
- else
- return 0;
-}
-
-/*
- * gpio_proc_read()
- */
-static int ubi_gpio_proc_read(char *buf, char **start, off_t offset,
- int len, int *unused_i, void *unused_v)
-{
- int c, outlen = 0;
-
- for (c = 0; c < MAX_UBICOM_GPIOS; c++) {
- if (!check_gpio(c) &&
- (reserved_gpio_map[gpio_bank(c)] & gpio_bit(c))) {
- len = sprintf(buf, "GPIO_%d:\t\tGPIO %s\n", c,
- ubi_get_gpio_dir(c) ? "OUTPUT" : "INPUT");
- } else {
- continue;
- }
-
- buf += len;
- outlen += len;
- }
- return outlen;
-}
-
-/*
- * ubi_gpio_register_proc()
- */
-static __init int ubi_gpio_register_proc(void)
-{
- struct proc_dir_entry *proc_gpio;
-
- proc_gpio = create_proc_entry("gpio", S_IRUGO, NULL);
- if (proc_gpio)
- proc_gpio->read_proc = ubi_gpio_proc_read;
-
- return proc_gpio != NULL;
-}
-device_initcall(ubi_gpio_register_proc);
-#endif
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/ubicom32hid.c
- * I2C driver for HID coprocessor found on some DPF implementations.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/backlight.h>
-#include <linux/fb.h>
-#include <linux/input.h>
-#include <linux/input-polldev.h>
-
-#include <asm/ubicom32hid.h>
-
-#define DRIVER_NAME "ubicom32hid"
-
-#ifdef DEBUG
-static int ubicom32hid_debug;
-#endif
-
-static const struct i2c_device_id ubicom32hid_id[] = {
- { DRIVER_NAME, },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, ubicom32hid_id);
-
-/*
- * Define this to make IR checking strict, in general, it's not needed
- */
-#undef UBICOM32HID_STRICT_IR_CHECK
-
-#define UBICOM32HID_CMD_SET_PWM 0x01
-#define UBICOM32HID_CMD_SET_BL_EN 0x02
-#define UBICOM32HID_BL_EN_LOW 0x00
-#define UBICOM32HID_BL_EN_HIZ 0x01
-#define UBICOM32HID_BL_EN_HI 0x02
-#define UBICOM32HID_CMD_FLUSH 0x99
-#define UBICOM32HID_CMD_RESET 0x99
-#define UBICOM32HID_CMD_GET_IR_SWITCH 0xC0
-#define UBICOM32HID_CMD_GET_REVISION 0xfd
-#define UBICOM32HID_CMD_GET_DEVICE_ID 0xfe
-#define UBICOM32HID_CMD_GET_VERSION 0xff
-#define UBICOM32HID_DEVICE_ID 0x49
-
-#define UBICOM32HID_MAX_BRIGHTNESS_PWM 255
-
-/*
- * Data structure returned by the HID device
- */
-struct ubicom32hid_input_data {
- uint32_t ircmd;
- uint8_t sw_state;
- uint8_t sw_changed;
-};
-
-/*
- * Our private data
- */
-struct ubicom32hid_data {
- /*
- * Pointer to the platform data structure, we need the settings.
- */
- const struct ubicom32hid_platform_data *pdata;
-
- /*
- * Backlight device
- */
- struct backlight_device *bldev;
-
- /*
- * I2C client, for sending messages to the HID device
- */
- struct i2c_client *client;
-
- /*
- * Current intensity, used for get_intensity.
- */
- int cur_intensity;
-
- /*
- * Input subsystem
- * We won't register an input subsystem if there are no mappings.
- */
- struct input_polled_dev *poll_dev;
-};
-
-
-/*
- * ubicom32hid_set_intensity
- */
-static int ubicom32hid_set_intensity(struct backlight_device *bd)
-{
- struct ubicom32hid_data *ud =
- (struct ubicom32hid_data *)bl_get_data(bd);
- int intensity = bd->props.brightness;
- int reg;
- u8_t val;
- int ret;
-
- /*
- * If we're blanked the the intensity doesn't matter.
- */
- if ((bd->props.power != FB_BLANK_UNBLANK) ||
- (bd->props.fb_blank != FB_BLANK_UNBLANK)) {
- intensity = 0;
- }
-
- /*
- * Set the brightness based on the type of backlight
- */
- if (ud->pdata->type == UBICOM32HID_BL_TYPE_BINARY) {
- reg = UBICOM32HID_CMD_SET_BL_EN;
- if (intensity) {
- val = ud->pdata->invert
- ? UBICOM32HID_BL_EN_LOW : UBICOM32HID_BL_EN_HI;
- } else {
- val = ud->pdata->invert
- ? UBICOM32HID_BL_EN_HI : UBICOM32HID_BL_EN_LOW;
- }
- } else {
- reg = UBICOM32HID_CMD_SET_PWM;
- val = ud->pdata->invert
- ? (UBICOM32HID_MAX_BRIGHTNESS_PWM - intensity) :
- intensity;
- }
-
- /*
- * Send the command
- */
- ret = i2c_smbus_write_byte_data(ud->client, reg, val);
- if (ret < 0) {
- dev_warn(&ud->client->dev, "Unable to write backlight err=%d\n",
- ret);
- return ret;
- }
-
- ud->cur_intensity = intensity;
-
- return 0;
-}
-
-/*
- * ubicom32hid_get_intensity
- * Return the current intensity of the backlight.
- */
-static int ubicom32hid_get_intensity(struct backlight_device *bd)
-{
- struct ubicom32hid_data *ud =
- (struct ubicom32hid_data *)bl_get_data(bd);
-
- return ud->cur_intensity;
-}
-
-/*
- * ubicom32hid_verify_data
- * Verify the data to see if there is any action to be taken
- *
- * Returns 0 if no action is to be taken, non-zero otherwise
- */
-static int ubicom32hid_verify_data(struct ubicom32hid_data *ud,
- struct ubicom32hid_input_data *data)
-{
- uint8_t *ircmd = (uint8_t *)&(data->ircmd);
-
- /*
- * ircmd == DEADBEEF means ir queue is empty. Since this is a
- * meaningful code, that means the rest of the message is most likely
- * correct, so only process the data if the switch state has changed.
- */
- if (data->ircmd == 0xDEADBEEF) {
- return data->sw_changed != 0;
- }
-
- /*
- * We have an ircmd which is not empty:
- * Data[1] should be the complement of Data[0]
- */
- if (ircmd[0] != (u8_t)~ircmd[1]) {
- return 0;
- }
-
-#ifdef UBICOM32HID_STRICT_IR_CHECK
- /*
- * It seems that some remote controls don't follow the NEC protocol
- * properly, so only do this check if the remote does indeed follow the
- * spec. Data[3] should be the complement of Data[2]
- */
- if (ircmd[2] == (u8_t)~ircmd[3]) {
- return 1;
- }
-
- /*
- * For non-compliant remotes, check the system code according to what
- * they send.
- */
- if ((ircmd[2] != UBICOM32HID_IR_SYSTEM_CODE_CHECK) ||
- (ircmd[3] != UBICOM32HID_IR_SYSTEM_CODE)) {
- return 0;
- }
-#endif
-
- /*
- * Data checks out, process
- */
- return 1;
-}
-
-/*
- * ubicom32hid_poll_input
- * Poll the input from the HID device.
- */
-static void ubicom32hid_poll_input(struct input_polled_dev *dev)
-{
- struct ubicom32hid_data *ud = (struct ubicom32hid_data *)dev->private;
- const struct ubicom32hid_platform_data *pdata = ud->pdata;
- struct ubicom32hid_input_data data;
- struct input_dev *id = dev->input;
- int i;
- int sync_needed = 0;
- uint8_t cmd;
- int ret;
-
- /*
- * Flush the queue
- */
- cmd = UBICOM32HID_CMD_FLUSH;
- ret = i2c_master_send(ud->client, &cmd, 1);
- if (ret < 0) {
- return;
- }
-
- ret = i2c_smbus_read_i2c_block_data(
- ud->client, UBICOM32HID_CMD_GET_IR_SWITCH, 6, (void *)&data);
- if (ret < 0) {
- return;
- }
-
- /*
- * Verify the data to see if there is any action to be taken
- */
- if (!ubicom32hid_verify_data(ud, &data)) {
- return;
- }
-
-#ifdef DEBUG
- if (ubicom32hid_debug) {
- printk("Polled ircmd=%8x swstate=%2x swchanged=%2x\n",
- data.ircmd, data.sw_state, data.sw_changed);
- }
-#endif
-
- /*
- * Process changed switches
- */
- if (data.sw_changed) {
- const struct ubicom32hid_button *ub = pdata->buttons;
- for (i = 0; i < pdata->nbuttons; i++, ub++) {
- uint8_t mask = (1 << ub->bit);
- if (!(data.sw_changed & mask)) {
- continue;
- }
-
- sync_needed = 1;
- input_event(id, ub->type, ub->code,
- (data.sw_state & mask) ? 1 : 0);
- }
- }
- if (sync_needed) {
- input_sync(id);
- }
-
- /*
- * Process ir codes
- */
- if (data.ircmd != 0xDEADBEEF) {
- const struct ubicom32hid_ir *ui = pdata->ircodes;
- for (i = 0; i < pdata->nircodes; i++, ui++) {
- if (ui->ir_code == data.ircmd) {
- /*
- * Simulate a up/down event
- */
- input_event(id, ui->type, ui->code, 1);
- input_sync(id);
- input_event(id, ui->type, ui->code, 0);
- input_sync(id);
- }
- }
- }
-}
-
-
-/*
- * Backlight ops
- */
-static struct backlight_ops ubicom32hid_blops = {
- .get_brightness = ubicom32hid_get_intensity,
- .update_status = ubicom32hid_set_intensity,
-};
-
-/*
- * ubicom32hid_probe
- */
-static int ubicom32hid_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct ubicom32hid_platform_data *pdata;
- struct ubicom32hid_data *ud;
- int ret;
- int i;
- u8 version[2];
- char buf[1];
-
- pdata = client->dev.platform_data;
- if (pdata == NULL) {
- return -ENODEV;
- }
-
- /*
- * See if we even have a device available before allocating memory.
- *
- * Hard reset the device
- */
- ret = gpio_request(pdata->gpio_reset, "ubicom32hid-reset");
- if (ret < 0) {
- return ret;
- }
- gpio_direction_output(pdata->gpio_reset, pdata->gpio_reset_polarity);
- udelay(100);
- gpio_set_value(pdata->gpio_reset, !pdata->gpio_reset_polarity);
- udelay(100);
-
- /*
- * soft reset the device. It sometimes takes a while to do this.
- */
- for (i = 0; i < 50; i++) {
- buf[0] = UBICOM32HID_CMD_RESET;
- ret = i2c_master_send(client, buf, 1);
- if (ret > 0) {
- break;
- }
- udelay(10000);
- }
- if (i == 50) {
- dev_warn(&client->dev, "Unable to reset device\n");
- goto fail;
- }
-
- ret = i2c_smbus_read_byte_data(client, UBICOM32HID_CMD_GET_DEVICE_ID);
- if (ret != UBICOM32HID_DEVICE_ID) {
- dev_warn(&client->dev, "Incorrect device id %02x\n", buf[0]);
- ret = -ENODEV;
- goto fail;
- }
-
- ret = i2c_smbus_read_byte_data(client, UBICOM32HID_CMD_GET_VERSION);
- if (ret < 0) {
- dev_warn(&client->dev, "Unable to get version\n");
- goto fail;
- }
- version[0] = ret;
-
- ret = i2c_smbus_read_byte_data(client, UBICOM32HID_CMD_GET_REVISION);
- if (ret < 0) {
- dev_warn(&client->dev, "Unable to get revision\n");
- goto fail;
- }
- version[1] = ret;
-
- /*
- * Allocate our private data
- */
- ud = kzalloc(sizeof(struct ubicom32hid_data), GFP_KERNEL);
- if (!ud) {
- ret = -ENOMEM;
- goto fail;
- }
- ud->pdata = pdata;
- ud->client = client;
-
- /*
- * Register our backlight device
- */
- ud->bldev = backlight_device_register(DRIVER_NAME, &client->dev,
- ud, &ubicom32hid_blops);
- if (IS_ERR(ud->bldev)) {
- ret = PTR_ERR(ud->bldev);
- goto fail2;
- }
- platform_set_drvdata(client, ud);
-
- /*
- * Start up the backlight with the requested intensity
- */
- ud->bldev->props.power = FB_BLANK_UNBLANK;
- ud->bldev->props.max_brightness =
- (pdata->type == UBICOM32HID_BL_TYPE_PWM) ?
- UBICOM32HID_MAX_BRIGHTNESS_PWM : 1;
- if (pdata->default_intensity < ud->bldev->props.max_brightness) {
- ud->bldev->props.brightness = pdata->default_intensity;
- } else {
- dev_warn(&client->dev, "Default brightness out of range, "
- "setting to max\n");
- ud->bldev->props.brightness = ud->bldev->props.max_brightness;
- }
-
- ubicom32hid_set_intensity(ud->bldev);
-
- /*
- * Check to see if we have any inputs
- */
- if (!pdata->nbuttons && !pdata->nircodes) {
- goto done;
- }
-
- /*
- * We have buttons or codes, we must register an input device
- */
- ud->poll_dev = input_allocate_polled_device();
- if (!ud->poll_dev) {
- ret = -ENOMEM;
- goto fail3;
- }
-
- /*
- * Setup the polling to default to 100ms
- */
- ud->poll_dev->poll = ubicom32hid_poll_input;
- ud->poll_dev->poll_interval =
- pdata->poll_interval ? pdata->poll_interval : 100;
- ud->poll_dev->private = ud;
-
- ud->poll_dev->input->name =
- pdata->input_name ? pdata->input_name : "Ubicom32HID";
- ud->poll_dev->input->phys = "ubicom32hid/input0";
- ud->poll_dev->input->dev.parent = &client->dev;
- ud->poll_dev->input->id.bustype = BUS_I2C;
-
- /*
- * Set the capabilities by running through the buttons and ir codes
- */
- for (i = 0; i < pdata->nbuttons; i++) {
- const struct ubicom32hid_button *ub = &pdata->buttons[i];
-
- input_set_capability(ud->poll_dev->input,
- ub->type ? ub->type : EV_KEY, ub->code);
- }
-
- for (i = 0; i < pdata->nircodes; i++) {
- const struct ubicom32hid_ir *ui = &pdata->ircodes[i];
-
- input_set_capability(ud->poll_dev->input,
- ui->type ? ui->type : EV_KEY, ui->code);
- }
-
- ret = input_register_polled_device(ud->poll_dev);
- if (ret) {
- goto fail3;
- }
-
-done:
- printk(KERN_INFO DRIVER_NAME ": enabled, version=%02x.%02x\n",
- version[0], version[1]);
-
- return 0;
-
-fail3:
- gpio_free(ud->pdata->gpio_reset);
- backlight_device_unregister(ud->bldev);
-fail2:
- kfree(ud);
-fail:
- gpio_free(pdata->gpio_reset);
- return ret;
-}
-
-/*
- * ubicom32hid_remove
- */
-static int ubicom32hid_remove(struct i2c_client *client)
-{
- struct ubicom32hid_data *ud =
- (struct ubicom32hid_data *)platform_get_drvdata(client);
-
- gpio_free(ud->pdata->gpio_reset);
-
- backlight_device_unregister(ud->bldev);
-
- if (ud->poll_dev) {
- input_unregister_polled_device(ud->poll_dev);
- input_free_polled_device(ud->poll_dev);
- }
-
- platform_set_drvdata(client, NULL);
-
- kfree(ud);
-
- return 0;
-}
-
-static struct i2c_driver ubicom32hid_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
- .probe = ubicom32hid_probe,
- .remove = __exit_p(ubicom32hid_remove),
- .id_table = ubicom32hid_id,
-};
-
-/*
- * ubicom32hid_init
- */
-static int __init ubicom32hid_init(void)
-{
- return i2c_add_driver(&ubicom32hid_driver);
-}
-module_init(ubicom32hid_init);
-
-/*
- * ubicom32hid_exit
- */
-static void __exit ubicom32hid_exit(void)
-{
- i2c_del_driver(&ubicom32hid_driver);
-}
-module_exit(ubicom32hid_exit);
-
-MODULE_AUTHOR("Pat Tjin <@ubicom.com>")
-MODULE_DESCRIPTION("Ubicom HID driver");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/ubicom32input.c
- * Ubicom32 Input driver
- *
- * based on gpio-keys
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- *
- *
- * TODO: add groups for inputs which can be sampled together (i.e. I2C)
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input-polldev.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <asm/ubicom32input.h>
-
-struct ubicom32input_data {
- struct ubicom32input_platform_data *pdata;
-
- struct input_polled_dev *poll_dev;
-
- /*
- * collection of previous states for buttons
- */
- u8 prev_state[0];
-};
-
-/*
- * ubicom32input_poll
- */
-static void ubicom32input_poll(struct input_polled_dev *dev)
-{
- struct ubicom32input_data *ud =
- (struct ubicom32input_data *)dev->private;
- struct ubicom32input_platform_data *pdata = ud->pdata;
- struct input_dev *id = dev->input;
- int i;
- int sync_needed = 0;
-
- for (i = 0; i < pdata->nbuttons; i++) {
- const struct ubicom32input_button *ub = &pdata->buttons[i];
- int state = 0;
-
- int val = gpio_get_value(ub->gpio);
-
- /*
- * Check to see if the state changed from the last time we
- * looked
- */
- if (val == ud->prev_state[i]) {
- continue;
- }
-
- /*
- * The state has changed, determine if we are "up" or "down"
- */
- ud->prev_state[i] = val;
-
- if ((!val && ub->active_low) || (val && !ub->active_low)) {
- state = 1;
- }
-
- input_event(id, ub->type, ub->code, state);
- sync_needed = 1;
- }
-
- if (sync_needed) {
- input_sync(id);
- }
-}
-
-/*
- * ubicom32input_probe
- */
-static int __devinit ubicom32input_probe(struct platform_device *pdev)
-{
- int i;
- struct ubicom32input_data *ud;
- struct input_polled_dev *poll_dev;
- struct input_dev *input_dev;
- struct ubicom32input_platform_data *pdata;
- int ret;
-
- pdata = pdev->dev.platform_data;
- if (!pdata) {
- return -EINVAL;
- }
-
- ud = kzalloc(sizeof(struct ubicom32input_data) +
- pdata->nbuttons, GFP_KERNEL);
- if (!ud) {
- return -ENOMEM;
- }
- ud->pdata = pdata;
-
- poll_dev = input_allocate_polled_device();
- if (!poll_dev) {
- ret = -ENOMEM;
- goto fail;
- }
-
- platform_set_drvdata(pdev, ud);
-
- ud->poll_dev = poll_dev;
- poll_dev->private = ud;
- poll_dev->poll = ubicom32input_poll;
-
- /*
- * Set the poll interval requested, default to 50 msec
- */
- if (pdata->poll_interval) {
- poll_dev->poll_interval = pdata->poll_interval;
- } else {
- poll_dev->poll_interval = 50;
- }
-
- /*
- * Setup the input device
- */
- input_dev = poll_dev->input;
- input_dev->name = pdata->name ? pdata->name : "Ubicom32 Input";
- input_dev->phys = "ubicom32input/input0";
- input_dev->dev.parent = &pdev->dev;
- input_dev->id.bustype = BUS_HOST;
-
- /*
- * Reserve the GPIOs
- */
- for (i = 0; i < pdata->nbuttons; i++) {
- const struct ubicom32input_button *ub = &pdata->buttons[i];
-
- ret = gpio_request(ub->gpio,
- ub->desc ? ub->desc : "ubicom32input");
- if (ret < 0) {
- pr_err("ubicom32input: failed to request "
- "GPIO %d ret=%d\n", ub->gpio, ret);
- goto fail2;
- }
-
- ret = gpio_direction_input(ub->gpio);
- if (ret < 0) {
- pr_err("ubicom32input: failed to set "
- "GPIO %d to input ret=%d\n", ub->gpio, ret);
- goto fail2;
- }
-
- /*
- * Set the previous state to the non-active stae
- */
- ud->prev_state[i] = ub->active_low;
-
- input_set_capability(input_dev,
- ub->type ? ub->type : EV_KEY, ub->code);
- }
-
- /*
- * Register
- */
- ret = input_register_polled_device(ud->poll_dev);
- if (ret) {
- goto fail2;
- }
-
- return 0;
-
-fail2:
- /*
- * release the GPIOs we have already requested.
- */
- while (--i >= 0) {
- gpio_free(pdata->buttons[i].gpio);
- }
-
-fail:
- printk(KERN_ERR "Ubicom32Input: Failed to register driver %d", ret);
- platform_set_drvdata(pdev, NULL);
- input_free_polled_device(poll_dev);
- kfree(ud);
- return ret;
-}
-
-/*
- * ubicom32input_remove
- */
-static int __devexit ubicom32input_remove(struct platform_device *dev)
-{
- struct ubicom32input_data *ud =
- (struct ubicom32input_data *)platform_get_drvdata(dev);
- int i;
-
- /*
- * Free the GPIOs
- */
- for (i = 0; i < ud->pdata->nbuttons; i++) {
- gpio_free(ud->pdata->buttons[i].gpio);
- }
-
- platform_set_drvdata(dev, NULL);
- input_unregister_polled_device(ud->poll_dev);
- input_free_polled_device(ud->poll_dev);
-
- kfree(ud);
-
- return 0;
-}
-
-static struct platform_driver ubicom32input_driver = {
- .driver = {
- .name = "ubicom32input",
- .owner = THIS_MODULE,
- },
- .probe = ubicom32input_probe,
- .remove = __devexit_p(ubicom32input_remove),
-};
-
-/*
- * ubicom32input_init
- */
-static int __devinit ubicom32input_init(void)
-{
- return platform_driver_register(&ubicom32input_driver);
-}
-
-/*
- * ubicom32input_exit
- */
-static void __exit ubicom32input_exit(void)
-{
- platform_driver_unregister(&ubicom32input_driver);
-}
-
-module_init(ubicom32input_init);
-module_exit(ubicom32input_exit);
-
-MODULE_AUTHOR("Pat Tjin <pattjin@ubicom.com>");
-MODULE_DESCRIPTION("Ubicom32 Input Driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:ubicom32-input");
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/ubicom32input_i2c.c
- * Ubicom32 Input driver for I2C
- * Supports PCA953x and family
- *
- * We hog the I2C device, turning it all to input.
- *
- * Based on gpio-keys, pca953x
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input-polldev.h>
-#include <linux/i2c.h>
-
-#include <asm/ubicom32input_i2c.h>
-
-#define UBICOM32INPUT_I2C_REG_INPUT 0
-#define UBICOM32INPUT_I2C_REG_OUTPUT 1
-#define UBICOM32INPUT_I2C_REG_INVERT 2
-#define UBICOM32INPUT_I2C_REG_DIRECTION 3
-
-static const struct i2c_device_id ubicom32input_i2c_id[] = {
- { "ubicom32in_pca9534", 8, },
- { "ubicom32in_pca9535", 16, },
- { "ubicom32in_pca9536", 4, },
- { "ubicom32in_pca9537", 4, },
- { "ubicom32in_pca9538", 8, },
- { "ubicom32in_pca9539", 16, },
- { "ubicom32in_pca9554", 8, },
- { "ubicom32in_pca9555", 16, },
- { "ubicom32in_pca9557", 8, },
- { "ubicom32in_max7310", 8, },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, ubicom32input_i2c_id);
-
-struct ubicom32input_i2c_data {
- struct ubicom32input_i2c_platform_data *pdata;
-
- struct i2c_client *client;
-
- struct input_polled_dev *poll_dev;
-
- /*
- * collection of previous states for buttons
- */
- uint16_t prev_state;
-
- uint8_t ngpios;
-};
-
-/*
- * ubicom32input_i2c_write_reg
- * writes a register to the I2C device.
- */
-static int ubicom32input_i2c_write_reg(struct ubicom32input_i2c_data *ud,
- int reg, uint16_t val)
-{
- int ret;
-
- if (ud->ngpios <= 8) {
- ret = i2c_smbus_write_byte_data(ud->client, reg, val);
- } else {
- ret = i2c_smbus_write_word_data(ud->client, reg << 1, val);
- }
-
- if (ret < 0) {
- return ret;
- }
-
- return 0;
-}
-
-/*
- * ubicom32input_i2c_read_reg
- * reads a register from the I2C device.
- */
-static int ubicom32input_i2c_read_reg(struct ubicom32input_i2c_data *ud,
- int reg, uint16_t *val)
-{
- int ret;
-
- if (ud->ngpios <= 8) {
- ret = i2c_smbus_read_byte_data(ud->client, reg);
- } else {
- ret = i2c_smbus_read_word_data(ud->client, reg);
- }
-
- if (ret < 0) {
- return ret;
- }
-
- *val = (uint16_t)ret;
-
- return 0;
-}
-
-/*
- * ubicom32input_i2c_poll
- */
-static void ubicom32input_i2c_poll(struct input_polled_dev *dev)
-{
- struct ubicom32input_i2c_data *ud =
- (struct ubicom32input_i2c_data *)dev->private;
- struct ubicom32input_i2c_platform_data *pdata = ud->pdata;
- struct input_dev *id = dev->input;
- int i;
- int sync_needed = 0;
- uint16_t val;
- uint16_t change_mask;
-
- /*
- * Try to get the input status, if we fail, bail out, maybe we can do it
- * next time.
- */
- if (ubicom32input_i2c_read_reg(ud, UBICOM32INPUT_I2C_REG_INPUT, &val)) {
- return;
- }
-
- /*
- * see if anything changed by using XOR
- */
- change_mask = ud->prev_state ^ val;
- ud->prev_state = val;
-
- for (i = 0; i < pdata->nbuttons; i++) {
- const struct ubicom32input_i2c_button *ub = &pdata->buttons[i];
- uint16_t mask = 1 << ub->bit;
- int state = val & mask;
-
- /*
- * Check to see if the state changed from the last time we
- * looked
- */
- if (!(change_mask & mask)) {
- continue;
- }
- input_event(id, ub->type, ub->code, state);
- sync_needed = 1;
- }
-
- if (sync_needed) {
- input_sync(id);
- }
-}
-
-/*
- * ubicom32input_i2c_probe
- */
-static int __devinit ubicom32input_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- int i;
- struct ubicom32input_i2c_data *ud;
- struct input_polled_dev *poll_dev;
- struct input_dev *input_dev;
- struct ubicom32input_i2c_platform_data *pdata;
- int ret;
- uint16_t invert_mask = 0;
-
- pdata = client->dev.platform_data;
- if (!pdata) {
- return -EINVAL;
- }
-
- ud = kzalloc(sizeof(struct ubicom32input_i2c_data), GFP_KERNEL);
- if (!ud) {
- return -ENOMEM;
- }
- ud->pdata = pdata;
- ud->client = client;
- ud->ngpios = id->driver_data;
-
- poll_dev = input_allocate_polled_device();
- if (!poll_dev) {
- ret = -ENOMEM;
- goto fail;
- }
-
- ud->poll_dev = poll_dev;
- poll_dev->private = ud;
- poll_dev->poll = ubicom32input_i2c_poll;
-
- /*
- * Set the poll interval requested, default to 100 msec
- */
- if (pdata->poll_interval) {
- poll_dev->poll_interval = pdata->poll_interval;
- } else {
- poll_dev->poll_interval = 100;
- }
-
- /*
- * Setup the input device
- */
- input_dev = poll_dev->input;
- input_dev->name = pdata->name ? pdata->name : "Ubicom32 Input I2C";
- input_dev->phys = "ubicom32input_i2c/input0";
- input_dev->dev.parent = &client->dev;
- input_dev->id.bustype = BUS_I2C;
-
- /*
- * Set the capabilities
- */
- for (i = 0; i < pdata->nbuttons; i++) {
- const struct ubicom32input_i2c_button *ub = &pdata->buttons[i];
-
- if (ub->active_low) {
- invert_mask |= (1 << ub->bit);
- }
-
- input_set_capability(input_dev,
- ub->type ? ub->type : EV_KEY, ub->code);
- }
-
- /*
- * Setup the device (all inputs)
- */
- ret = ubicom32input_i2c_write_reg(ud, UBICOM32INPUT_I2C_REG_DIRECTION,
- 0xFFFF);
- if (ret < 0) {
- goto fail;
- }
-
- ret = ubicom32input_i2c_write_reg(ud, UBICOM32INPUT_I2C_REG_INVERT,
- invert_mask);
- if (ret < 0) {
- goto fail;
- }
-
- /*
- * Register
- */
- ret = input_register_polled_device(ud->poll_dev);
- if (ret) {
- goto fail;
- }
-
- i2c_set_clientdata(client, ud);
-
- return 0;
-
-fail:
- printk(KERN_ERR "ubicom32input_i2c: Failed to register driver %d\n",
- ret);
- input_free_polled_device(poll_dev);
- kfree(ud);
- return ret;
-}
-
-/*
- * ubicom32input_i2c_remove
- */
-static int __devexit ubicom32input_i2c_remove(struct i2c_client *client)
-{
- struct ubicom32input_i2c_data *ud =
- (struct ubicom32input_i2c_data *)i2c_get_clientdata(client);
-
- i2c_set_clientdata(client, NULL);
- input_unregister_polled_device(ud->poll_dev);
- input_free_polled_device(ud->poll_dev);
-
- kfree(ud);
-
- return 0;
-}
-
-static struct i2c_driver ubicom32input_i2c_driver = {
- .driver = {
- .name = "ubicom32input_i2c",
- .owner = THIS_MODULE,
- },
- .remove = __devexit_p(ubicom32input_i2c_remove),
- .id_table = ubicom32input_i2c_id,
- .probe = ubicom32input_i2c_probe,
-};
-
-/*
- * ubicom32input_i2c_init
- */
-static int __devinit ubicom32input_i2c_init(void)
-{
- return i2c_add_driver(&ubicom32input_i2c_driver);
-}
-
-/*
- * ubicom32input_i2c_exit
- */
-static void __exit ubicom32input_i2c_exit(void)
-{
- i2c_del_driver(&ubicom32input_i2c_driver);
-}
-
-module_init(ubicom32input_i2c_init);
-module_exit(ubicom32input_i2c_exit);
-
-MODULE_AUTHOR("Pat Tjin <pattjin@ubicom.com>");
-MODULE_DESCRIPTION("Ubicom32 Input Driver I2C");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:ubicom32-input");
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/ip5k_usb.c
- * Ubicom32 architecture usb support.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
- * Author: Kevin Hilman
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can
- * redistribute it and/or modify it under the terms of the GNU General
- * Public License as published by the Free Software Foundation, either
- * version 2 of the License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/usb/musb.h>
-#include <asm/devtree.h>
-#include <asm/ip5000.h>
-#include "usb_tio.h"
-
-struct usbtionode *unode = NULL;
-
-static struct resource usb_resources[] = {
- [0] = {
- .start = RJ + 0x800,
- .end = RJ + 0x1000,
- .flags = IORESOURCE_MEM,
- },
- [1] = { /* general IRQ */
- .start = 1, /* this is a dummy value, the real irq number is passed from kernel_setup_param */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-
-static struct musb_hdrc_eps_bits musb_eps[] = {
- { "ep1_tx", 4, },
- { "ep1_rx", 4, },
- { "ep2_tx", 10, },
- { "ep2_rx", 10, },
- { "ep3_tx", 9, },
- { "ep3_rx", 9, },
- { "ep4_tx", 9, },
- { "ep4_rx", 9, },
- { "ep5_tx", 6, },
- { "ep5_rx", 6, },
-};
-
-static struct musb_hdrc_config musb_config = {
- .multipoint = true,
- .dyn_fifo = false,
- .soft_con = true,
- .dma = false,
-
- .num_eps = 6,
- .dma_channels = 0,
- .ram_bits = 0,
- .eps_bits = musb_eps,
-};
-
-static struct musb_hdrc_platform_data usb_data = {
-#ifdef CONFIG_USB_MUSB_OTG
- .mode = MUSB_OTG,
-#else
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- .mode = MUSB_HOST,
-#else
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
- .mode = MUSB_PERIPHERAL,
-#endif
-#endif
-#endif
- .clock = NULL,
- .set_clock = NULL,
- .config = &musb_config,
-};
-
-static struct platform_device musb_device = {
- .name = "musb_hdrc",
- .id = 0,
- .dev = {
- .platform_data = &usb_data,
- .dma_mask = NULL,
- .coherent_dma_mask = 0,
- },
- .resource = usb_resources,
- .num_resources = ARRAY_SIZE(usb_resources),
-};
-
-struct usbtio_node *usb_node = NULL;
-void ubi32_usb_init(void)
-{
- /*
- * See if the usbtio is in the device tree.
- */
- usb_node = (struct usbtio_node *)devtree_find_node("usbtio");
- if (!usb_node) {
- printk(KERN_WARNING "usb init failed\n");
- return;
- }
-
- usb_resources[1].start = usb_node->dn.recvirq;
- if (platform_device_register(&musb_device) < 0) {
- printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
- return;
- }
-}
-
-void ubi32_usb_int_clr(void)
-{
- UBICOM32_IO_PORT(RJ)->int_clr = (1 << 3);
-}
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/usb_tio.c
- * Linux side Ubicom USB TIO driver
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <asm/devtree.h>
-#include "usb_tio.h"
-
-#ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(tio_lock);
-#define USB_TIO_LOCK(lock, flag) spin_lock_irqsave(lock, flag)
-#define USB_TIO_UNLOCK(lock, flag) spin_unlock_irqrestore(lock, flag)
-#define USB_TIO_LOCK_ISLOCKED(lock) spin_try_lock(lock)
-#else
-#define USB_TIO_LOCK(lock, flag) local_irq_save(flag)
-#define USB_TIO_UNLOCK(lock, flag) local_irq_restore(flag)
-#endif
-
-spinlock_t usb_tio_lock;
-
-/*
- * usb_tio_set_hrt_interrupt()
- */
-static inline void usb_tio_set_hrt_interrupt(void)
-{
- ubicom32_set_interrupt(usb_node->dn.sendirq);
-}
-
-static inline void usb_tio_wait_hrt(void)
-{
- while (unlikely(usb_node->pdesc));
-}
-
-#if defined(USB_TIO_DEBUG)
-static void usb_tio_request_verify_magic(volatile struct usb_tio_request *req)
-{
- BUG_ON(req->magic != USB_TIO_REQUEST_MAGIC2);
-}
-
-static void usb_tio_request_clear_magic(volatile struct usb_tio_request *req)
-{
- req->magic = 0;
-}
-#endif
-
-static void usb_tio_request_set_magic(volatile struct usb_tio_request *req)
-{
- req->magic = USB_TIO_REQUEST_MAGIC1;
-}
-
-/*
- * usb_tio_commit_request()
- */
-static inline void usb_tio_commit_request(volatile struct usb_tio_request *request)
-{
- wmb();
- usb_node->pdesc = request;
-
- /*
- * next thing to do is alway checking if (usb_node->pdesc == NULL)
- * to see if the request is done, so add a mb() here
- */
- mb();
- usb_tio_set_hrt_interrupt();
-}
-
-/*
- * usb_tio_read_u16()
- * Synchronously read 16 bits.
- */
-u8_t usb_tio_read_u16(u32_t address, u16_t *data)
-{
- volatile struct usb_tio_request *tio_req = &usb_node->request;
- unsigned long flag;
-
- /*
- * Wait for any previous request to complete and then make this request.
- */
- USB_TIO_LOCK(&tio_lock, flag);
- usb_tio_wait_hrt();
-
- /*
- * Fill in the request.
- */
- tio_req->address = address;
- tio_req->cmd = USB_TIO_READ16_SYNC;
- USB_TIO_REQUEST_SET_MAGIC(tio_req);
- usb_tio_commit_request(tio_req);
-
- /*
- * Wait for the result to show up.
- */
- usb_tio_wait_hrt();
- USB_TIO_REQUEST_VERIFY_MAGIC(tio_req);
- *data = (u16_t)tio_req->data;
- USB_TIO_REQUEST_CLEAR_MAGIC(tio_req);
- USB_TIO_UNLOCK(&tio_lock, flag);
- return USB_TIO_OK;
-}
-
-/*
- * usb_tio_read_u8()
- * Synchronously read 16 bits.
- */
-u8_t usb_tio_read_u8(u32_t address, u8_t *data)
-{
- volatile struct usb_tio_request *tio_req = &usb_node->request;
- unsigned long flag;
-
- /*
- * Wait for any previous request to complete and then make this request.
- */
- USB_TIO_LOCK(&tio_lock, flag);
- usb_tio_wait_hrt();
-
- /*
- * Fill in the request.
- */
- tio_req->address = address;
- tio_req->cmd = USB_TIO_READ8_SYNC;
- USB_TIO_REQUEST_SET_MAGIC(tio_req);
-
- /*
- * commit the request
- */
- usb_tio_commit_request(tio_req);
-
- /*
- * Wait for the result to show up.
- */
- usb_tio_wait_hrt();
- USB_TIO_REQUEST_VERIFY_MAGIC(tio_req);
- *data = (u8_t)tio_req->data;
- USB_TIO_REQUEST_CLEAR_MAGIC(tio_req);
- USB_TIO_UNLOCK(&tio_lock, flag);
- return USB_TIO_OK;
-}
-
-/*
- * usb_tio_write_u16()
- * Asynchronously write 16 bits.
- */
-u8_t usb_tio_write_u16(u32_t address, u16_t data)
-{
- volatile struct usb_tio_request *tio_req = &usb_node->request;
- unsigned long flag;
-
- /*
- * Wait for any previous write or pending read to complete.
- */
- USB_TIO_LOCK(&tio_lock, flag);
- usb_tio_wait_hrt();
-
- tio_req->address = address;
- tio_req->data = data;
- tio_req->cmd = USB_TIO_WRITE16_ASYNC;
- USB_TIO_REQUEST_SET_MAGIC(tio_req);
-
- /*
- * commit the request
- */
- usb_tio_commit_request(tio_req);
- USB_TIO_UNLOCK(&tio_lock, flag);
- return USB_TIO_OK;
-}
-
-/*
- * usb_tio_write_u8()
- * Asynchronously write 8 bits.
- */
-u8_t usb_tio_write_u8(u32_t address, u8_t data)
-{
- volatile struct usb_tio_request *tio_req = &usb_node->request;
- unsigned long flag;
-
- /*
- * Wait for any previous write or pending read to complete.
- */
- USB_TIO_LOCK(&tio_lock, flag);
- usb_tio_wait_hrt();
-
- tio_req->address = address;
- tio_req->data = data;
- tio_req->cmd = USB_TIO_WRITE8_ASYNC;
- USB_TIO_REQUEST_SET_MAGIC(tio_req);
-
- /*
- * commit the request
- */
- usb_tio_commit_request(tio_req);
- USB_TIO_UNLOCK(&tio_lock, flag);
- return USB_TIO_OK;
-}
-
-/*
- * usb_tio_read_fifo()
- * Synchronously read FIFO.
- */
-u8_t usb_tio_read_fifo(u32_t address, u32_t buffer, u32_t bytes)
-{
- volatile struct usb_tio_request *tio_req = &usb_node->request;
- unsigned long flag;
-
- /*
- * Wait for any previous request to complete and then make this request.
- */
- USB_TIO_LOCK(&tio_lock, flag);
- usb_tio_wait_hrt();
-
- /*
- * Fill in the request.
- */
- tio_req->address = address;
- tio_req->cmd = USB_TIO_READ_FIFO_SYNC;
- tio_req->buffer = buffer;
- tio_req->transfer_length = bytes;
- USB_TIO_REQUEST_SET_MAGIC(tio_req);
-
- /*
- * commit the request
- */
- usb_tio_commit_request(tio_req);
-
- /*
- * Wait for the result to show up.
- */
- usb_tio_wait_hrt();
- USB_TIO_REQUEST_VERIFY_MAGIC(tio_req);
- USB_TIO_REQUEST_CLEAR_MAGIC(tio_req);
- USB_TIO_UNLOCK(&tio_lock, flag);
- return USB_TIO_OK;
-}
-
-/*
- * usb_tio_write_fifo()
- * Synchronously write 32 bits.
- */
-u8_t usb_tio_write_fifo(u32_t address, u32_t buffer, u32_t bytes)
-{
- volatile struct usb_tio_request *tio_req = &usb_node->request;
- unsigned long flag;
-
- USB_TIO_LOCK(&tio_lock, flag);
- usb_tio_wait_hrt();
-
- tio_req->address = address;
- tio_req->buffer = buffer;
- tio_req->cmd = USB_TIO_WRITE_FIFO_SYNC;
- tio_req->transfer_length = bytes;
- USB_TIO_REQUEST_SET_MAGIC(tio_req);
- /*
- * commit the request
- */
- usb_tio_commit_request(tio_req);
-
- /*
- * Wait for the result to show up.
- */
- usb_tio_wait_hrt();
- USB_TIO_REQUEST_VERIFY_MAGIC(tio_req);
- USB_TIO_REQUEST_CLEAR_MAGIC(tio_req);
- USB_TIO_UNLOCK(&tio_lock, flag);
- return USB_TIO_OK;
-}
-
-/*
- * usb_tio_write_fifo_async()
- * Asynchronously write 32 bits.
- */
-u8_t usb_tio_write_fifo_async(u32_t address, u32_t buffer, u32_t bytes)
-{
- volatile struct usb_tio_request *tio_req = &usb_node->request;
- unsigned long flag;
-
- USB_TIO_LOCK(&tio_lock, flag);
- usb_tio_wait_hrt();
-
- tio_req->address = address;
-
- /*
- * Is it necessary to make a local copy of the buffer? Any chance the URB is aborted before TIO finished the FIFO write?
- */
- tio_req->buffer = buffer;
- tio_req->cmd = USB_TIO_WRITE_FIFO_SYNC;
- tio_req->transfer_length = bytes;
- USB_TIO_REQUEST_SET_MAGIC(tio_req);
- /*
- * commit the request
- */
- usb_tio_commit_request(tio_req);
- USB_TIO_UNLOCK(&tio_lock, flag);
- return USB_TIO_OK;
-}
-
-/*
- * usb_tio_read_int_status()
- * read and clear the interrupt status registers
- */
-void usb_tio_read_int_status(u8_t *int_usb, u16_t *int_tx, u16_t *int_rx)
-{
-
- /*
- * clear the interrupt must be syncronized with the TIO thread to prevent the racing condiiton
- * that TIO thread try to set it at same time
- */
- asm volatile (
- "1: bset (%0), (%0), #0 \n\t" \
- " jmpne.f 1b \n\t" \
- :
- : "a" (&usb_node->usb_vp_control)
- : "memory", "cc"
- );
-
- *int_usb = usb_node->usb_vp_hw_int_usb;
- *int_tx = cpu_to_le16(usb_node->usb_vp_hw_int_tx);
- *int_rx = cpu_to_le16(usb_node->usb_vp_hw_int_rx);
-
- //printk(KERN_INFO "int read %x, %x, %x\n", *int_usb, *int_tx, *int_rx);
-
- /*
- * The interrupt status register is read-clean, so clear it now
- */
- usb_node->usb_vp_hw_int_usb = 0;
- usb_node->usb_vp_hw_int_tx = 0;
- usb_node->usb_vp_hw_int_rx = 0;
-
- /*
- * release the lock bit
- */
- usb_node->usb_vp_control &= 0xfffe;
-}
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/usb_tio.h
- * Definitions for usb_tio.c
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/version.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <asm/devtree.h>
-#include <asm/ip5000.h>
-
-#ifndef _USB_TIO_H
-#define _USB_TIO_H
-
-#undef USB_TIO_DEBUG
-
-#define USB_TIO_REQUEST_MAGIC1 0x2307
-#define USB_TIO_REQUEST_MAGIC2 0x0789
-#if defined(USB_TIO_DEBUG)
-#define USB_TIO_REQUEST_VERIFY_MAGIC(req) usb_tio_request_verify_magic(req)
-#define USB_TIO_REQUEST_SET_MAGIC(req) usb_tio_request_set_magic(req)
-#define USB_TIO_REQUEST_CLEAR_MAGIC(req) usb_tio_request_clear_magic(req)
-#else
-#define USB_TIO_REQUEST_VERIFY_MAGIC(req)
-#define USB_TIO_REQUEST_SET_MAGIC(req) usb_tio_request_set_magic(req)
-#define USB_TIO_REQUEST_CLEAR_MAGIC(req)
-#endif
-
-enum USB_TIO_status {
- USB_TIO_OK,
- USB_TIO_ERROR,
- USB_TIO_ERROR_COMMIT,
-};
-
-enum USB_TIO_cmds {
- USB_TIO_READ16_SYNC,
- USB_TIO_READ8_SYNC,
- USB_TIO_READ_FIFO_SYNC,
-
- USB_TIO_WRITE16_ASYNC,
- USB_TIO_WRITE8_ASYNC,
- USB_TIO_WRITE_FIFO_ASYNC,
-
- USB_TIO_WRITE16_SYNC,
- USB_TIO_WRITE8_SYNC,
- USB_TIO_WRITE_FIFO_SYNC,
-
-};
-
-enum USB_TIO_state {
- USB_TIO_NORMAL,
- USB_TIO_DMA_SETUP,
-};
-
-struct usb_tio_request {
- volatile u32_t address;
- union {
- volatile u32_t data;
- volatile u32_t buffer;
- };
- volatile u16_t cmd;
- const volatile u16_t status;
- volatile u32_t transfer_length;
- volatile u32_t thread_mask;
- volatile u16_t magic;
-};
-
-struct usbtio_node {
- struct devtree_node dn;
- volatile struct usb_tio_request * volatile pdesc;
- struct usb_tio_request request;
- volatile u32_t usb_vp_config;
- volatile u32_t usb_vp_control;
- const volatile u32_t usb_vp_status;
- volatile u16_t usb_vp_hw_int_tx;
- volatile u16_t usb_vp_hw_int_rx;
- volatile u8_t usb_vp_hw_int_usb;
- volatile u8_t usb_vp_hw_int_mask_usb;
- volatile u16_t usb_vp_hw_int_mask_tx;
- volatile u16_t usb_vp_hw_int_mask_rx;
-
-};
-
-extern struct usbtio_node *usb_node;
-extern void ubi32_usb_init(void);
-#endif
+++ /dev/null
-/*
- * arch/ubicom32/mach-common/vdc_tio.c
- * Generic initialization for VDC
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/platform_device.h>
-#include <linux/types.h>
-
-#include <asm/devtree.h>
-#include <asm/vdc_tio.h>
-
-/*
- * Resources that this driver uses
- */
-static struct resource vdc_tio_resources[] = {
- /*
- * Send IRQ
- */
- [0] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_IRQ,
- },
-
- /*
- * Receive IRQ (optional)
- */
- [1] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_IRQ,
- },
-
- /*
- * Memory Mapped Registers
- */
- [2] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_MEM,
- },
-};
-
-/*
- * The platform_device structure which is passed to the driver
- */
-static struct platform_device vdc_tio_platform_device = {
- .name = "ubicom32fb",
- .id = -1,
- .resource = vdc_tio_resources,
- .num_resources = ARRAY_SIZE(vdc_tio_resources),
-};
-
-/*
- * vdc_tio_init
- * Checks the device tree and instantiates the driver if found
- */
-void __init vdc_tio_init(void)
-{
- /*
- * Check the device tree for the vdc_tio
- */
- struct vdc_tio_node *vdc_node =
- (struct vdc_tio_node *)devtree_find_node("vdctio");
- if (!vdc_node) {
- printk(KERN_WARNING "No vdc_tio found\n");
- return;
- }
-
- /*
- * Fill in the resources and platform data from devtree information
- */
- vdc_tio_resources[0].start = vdc_node->dn.sendirq;
- vdc_tio_resources[1].start = vdc_node->dn.recvirq;
- vdc_tio_resources[2].start = (u32_t)vdc_node->regs;
- vdc_tio_resources[2].end = (u32_t)vdc_node->regs +
- sizeof(struct vdc_tio_vp_regs);
-
- /*
- * Try to get the device registered
- */
- if (platform_device_register(&vdc_tio_platform_device) < 0) {
- printk(KERN_WARNING "VDC failed to register\n");
- }
-}
+++ /dev/null
-
-config IP5170DPF
- bool "IP5170DPF"
- select UBICOM32_V3
- select I2C
- select I2C_GPIO
- select FB
- select FB_UBICOM32
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
- select UBICOM_HID
- select NEW_LEDS
- select LEDS_CLASS
- select LEDS_GPIO
- help
- IP5170 Digital Picture Frame board, 8005-1113, IP5K-BEV-0011-13 v1.3
-
-config IP5160DEV
- bool "IP5160Dev_Ver1Dot1"
- select UBICOM32_V3
- help
- Ubicom StreamEngine 5000 Development Board, IP5K-BDV-0004-11 v1.1
-
-config IP5160EVAL
- bool "IP5160RGWEval_Ver2Rev2"
- select UBICOM32_V3
- help
- Ubicom StreamEngine 5000 RGW Evaluation Board, IP5K-RGW-0004-11 v2.2
+++ /dev/null
-#
-# arch/ubicom32/mach-ip5k/Makefile
-# Makefile for boards which have an ip5k on them.
-#
-# (C) Copyright 2009, Ubicom, Inc.
-#
-# This file is part of the Ubicom32 Linux Kernel Port.
-#
-# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-# it and/or modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation, either version 2 of the
-# License, or (at your option) any later version.
-#
-# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with the Ubicom32 Linux Kernel Port. If not,
-# see <http://www.gnu.org/licenses/>.
-#
-# Ubicom32 implementation derived from (with many thanks):
-# arch/m68knommu
-# arch/blackfin
-# arch/parisc
-#
-
-obj-$(CONFIG_IP5170DPF) += board-ip5170dpf.o
-obj-$(CONFIG_IP5160DEV) += board-ip5160dev.o
-obj-$(CONFIG_IP5160EVAL) += board-ip5160rgw.o
+++ /dev/null
-/*
- * arch/ubicom32/mach-ip5k/board-ip5160dev.c
- * Platform initialization for ip5160dev board.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/board.h>
-#include <asm/machdep.h>
-#ifdef CONFIG_SERIAL_UBI32_SERDES
-#include <asm/ubicom32suart.h>
-#endif
-
-/*
- * Factory Default Button on the board at PXn
- * TODO: This is just a placeholder and it needs to include proper header files
- */
-struct ubicom32fdb_platform_data {
- int fdb_gpio;
- bool fdb_polarity;
-};
-
-static struct ubicom32fdb_platform_data ip5160dev_fdb_data = {
- .fdb_gpio = 0,
- .fdb_polarity = true,
-};
-
-static struct platform_device ip5160dev_fdb_device = {
- .name = "ubicom32fdb",
- .id = -1,
- .dev = {
- .platform_data = &ip5160dev_fdb_data,
- },
-};
-
-#ifdef CONFIG_SERIAL_UBI32_SERDES
-static struct resource ip5160dev_ubicom32_suart_resources[] = {
- {
- .start = RD,
- .end = RD,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PORT_OTHER_INT(RD),
- .end = PORT_OTHER_INT(RD),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = 240000000,
- .end = 240000000,
- .flags = UBICOM32_SUART_IORESOURCE_CLOCK,
- },
-};
-
-static struct platform_device ip5160dev_ubicom32_suart_device = {
- .name = "ubicom32suart",
- .id = -1,
- .num_resources = ARRAY_SIZE(ip5160dev_ubicom32_suart_resources),
- .resource = ip5160dev_ubicom32_suart_resources,
-};
-#endif
-
-/*
- * List of all devices in our system
- */
-static struct platform_device *ip5160dev_devices[] __initdata = {
-#ifdef CONFIG_SERIAL_UBI32_SERDES
- &ip5160dev_ubicom32_suart_device,
-#endif
- &ip5160dev_fdb_device,
-};
-
-/*
- * ip5160dev_init
- * Called to add the devices which we have on this board
- */
-static int __init ip5160dev_init(void)
-{
- ubi_gpio_init();
- printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
- platform_add_devices(ip5160dev_devices, ARRAY_SIZE(ip5160dev_devices));
- return 0;
-}
-
-arch_initcall(ip5160dev_init);
+++ /dev/null
-/*
- * arch/ubicom32/mach-ip5k/board-ip5160rgw.c
- * Platform initialization for ip5160rgw board.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/board.h>
-#include <asm/machdep.h>
-
-/*
- * Factory Default Button on the board at PXn
- * TODO: This is just a placeholder and it needs to include proper header files
- */
-struct ubicom32fdb_platform_data {
- int fdb_gpio;
- bool fdb_polarity;
-};
-
-static struct ubicom32fdb_platform_data ip5160rgw_fdb_data = {
- .fdb_gpio = 0,
- .fdb_polarity = true,
-};
-
-static struct platform_device ip5160rgw_fdb_device = {
- .name = "ubicom32fdb",
- .id = -1,
- .dev = {
- .platform_data = &ip5160rgw_fdb_data,
- },
-};
-
-/*
- * List of all devices in our system
- */
-static struct platform_device *ip5160rgw_devices[] __initdata = {
- &ip5160rgw_fdb_device,
-};
-
-/*
- * ip5160rgw_init
- * Called to add the devices which we have on this board
- */
-static int __init ip5160rgw_init(void)
-{
- ubi_gpio_init();
- printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
- platform_add_devices(ip5160rgw_devices, ARRAY_SIZE(ip5160rgw_devices));
- return 0;
-}
-
-arch_initcall(ip5160rgw_init);
+++ /dev/null
-/*
- * arch/ubicom32/mach-ip5k/board-ip5170dpf.c
- * Platform initialization for ip5160dpf board.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-
-#include <linux/input.h>
-#include <asm/board.h>
-#include <asm/machdep.h>
-#include <asm/ubicom32hid.h>
-#include <asm/vdc_tio.h>
-
-/*
- * LEDs
- *
- * WLAN PD9 (Note this is shared with MISO, but we don't use it)
- * WPS PD8
- *
- * TODO: check triggers, are they generic?
- */
-static struct gpio_led ip5170dpf_gpio_leds[] = {
- {
- .name = "d31:green:WLAN1",
- .default_trigger = "WLAN1",
- .gpio = GPIO_RD_9,
- .active_low = 1,
- },
- {
- .name = "d30:green:WPS",
- .default_trigger = "WPS",
- .gpio = GPIO_RD_8,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data ip5170dpf_gpio_led_platform_data = {
- .num_leds = 2,
- .leds = ip5170dpf_gpio_leds,
-};
-
-static struct platform_device ip5170dpf_gpio_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &ip5170dpf_gpio_led_platform_data,
- },
-};
-
-/*
- * Backlight on the board PD0, hardware PWM
- */
-static const struct ubicom32hid_button ip5170dpf_ubicom32hid_buttons[] = {
- {
- .type = EV_KEY,
- .code = KEY_UP,
- .bit = 0,
- },
- {
- .type = EV_KEY,
- .code = KEY_LEFT,
- .bit = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_RIGHT,
- .bit = 2,
- },
- {
- .type = EV_KEY,
- .code = KEY_DOWN,
- .bit = 3,
- },
- {
- .type = EV_KEY,
- .code = KEY_ENTER,
- .bit = 4,
- },
- {
- .type = EV_KEY,
- .code = KEY_MENU,
- .bit = 5,
- },
- {
- .type = EV_KEY,
- .code = KEY_ESC,
- .bit = 7,
- },
-};
-
-static const struct ubicom32hid_ir ip5170dpf_ubicom32hid_ircodes[] = {
- {
- .type = EV_KEY,
- .code = KEY_UP,
- .ir_code = 0xF807916E
- },
- {
- .type = EV_KEY,
- .code = KEY_DOWN,
- .ir_code = 0xF20D916E
- },
- {
- .type = EV_KEY,
- .code = KEY_LEFT,
- .ir_code = 0xF609916E
- },
- {
- .type = EV_KEY,
- .code = KEY_RIGHT,
- .ir_code = 0xF40B916E
- },
- {
- .type = EV_KEY,
- .code = KEY_ENTER,
- .ir_code = 0xF50A916E
- },
- { /* rotate */
- .type = EV_KEY,
- .code = KEY_FN_F1,
- .ir_code = 0xF906916E
- },
- {
- .type = EV_KEY,
- .code = KEY_MENU,
- .ir_code = 0xF708916E
- },
- { /* font size */
- .type = EV_KEY,
- .code = KEY_FN_F2,
- .ir_code = 0xF30C916E
- },
- {
- .type = EV_KEY,
- .code = KEY_ESC,
- .ir_code = 0xF10E916E
- },
- {
- .type = EV_KEY,
- .code = KEY_VOLUMEUP,
- .ir_code = 0xF00F916E
- },
- {
- .type = EV_KEY,
- .code = KEY_VOLUMEDOWN,
- .ir_code = 0xED12916E
- },
- {
- .type = EV_KEY,
- .code = KEY_MUTE,
- .ir_code = 0xEA15916E
- },
- {
- .type = EV_KEY,
- .code = KEY_INFO,
- .ir_code = 0xEF10916E
- },
- { /* Like */
- .type = EV_KEY,
- .code = KEY_FN_F3,
- .ir_code = 0xEE11916E
- },
- { /* Dislike */
- .type = EV_KEY,
- .code = KEY_FN_F4,
- .ir_code = 0xEB14916E
- },
- {
- .type = EV_KEY,
- .code = KEY_POWER,
- .ir_code = 0xFD02916E
- },
-};
-
-static struct ubicom32hid_platform_data ip5170dpf_ubicom32hid_platform_data = {
- .gpio_reset = GPIO_RA_4,
- .gpio_reset_polarity = 0,
- .type = UBICOM32HID_BL_TYPE_BINARY,
- .invert = 0,
- .default_intensity = 1,
- .buttons = ip5170dpf_ubicom32hid_buttons,
- .nbuttons = ARRAY_SIZE(ip5170dpf_ubicom32hid_buttons),
- .ircodes = ip5170dpf_ubicom32hid_ircodes,
- .nircodes = ARRAY_SIZE(ip5170dpf_ubicom32hid_ircodes),
-};
-
-/*
- * Devices on the I2C bus
- */
-static struct i2c_board_info __initdata ip5170dpf_i2c_board_info[] = {
- /*
- * U24, ubicom32hid
- */
- {
- .type = "ubicom32hid",
- .addr = 0x08,
- .platform_data = &ip5170dpf_ubicom32hid_platform_data,
- },
-
- /*
- * U14, CS4350 DAC, address 0x4B
- */
-};
-
-/*
- * I2C bus on the board, SDA PF13, SCL PF14
- */
-static struct i2c_gpio_platform_data ip5170dpf_i2c_data = {
- .sda_pin = GPIO_RF_13,
- .scl_pin = GPIO_RF_14,
- .sda_is_open_drain = 0,
- .scl_is_open_drain = 0,
- .scl_is_output_only = 1,
- .udelay = 5,
-};
-
-static struct platform_device ip5170dpf_i2c_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &ip5170dpf_i2c_data,
- },
-};
-
-/*
- * List of all devices in our system
- */
-static struct platform_device *ip5170dpf_devices[] __initdata = {
- &ip5170dpf_i2c_device,
- &ip5170dpf_gpio_leds_device,
-};
-
-/*
- * ip5170dpf_init
- * Called to add the devices which we have on this board
- */
-static int __init ip5170dpf_init(void)
-{
- ubi_gpio_init();
-
- vdc_tio_init();
-
- printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
- platform_add_devices(ip5170dpf_devices, ARRAY_SIZE(ip5170dpf_devices));
-
- printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
- i2c_register_board_info(0, ip5170dpf_i2c_board_info, ARRAY_SIZE(ip5170dpf_i2c_board_info));
-
- return 0;
-}
-
-arch_initcall(ip5170dpf_init);
+++ /dev/null
-config IP7145DPF
- bool "IP7145DPF"
- select UBICOM32_V4
- select UBICOM_INPUT
- select UBICOM_INPUT_I2C
- select RTC_CLASS
- select RTC_DRV_S35390A
- select I2C
- select I2C_GPIO
- select GPIO_PCA953X
- select FB
- select FB_UBICOM32
- select LCD_CLASS_DEVICE
- select LCD_UBICOM32POWER
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
- select BACKLIGHT_UBICOM32
- select SND_UBI32
- select MMC_UBICOM32
- select MMC
- select MMC_BLOCK
- help
- IP7145 Digital Picture Frame reference design, supports:
- 8007-0410 v1.0
-
-config IP7160RGW
- bool "IP7160RGW"
- select UBICOM32_V4
- select UBICOM_INPUT
- select NEW_LEDS
- select LEDS_CLASS
- select LEDS_GPIO
- select SPI
- select SPI_UBICOM32_GPIO
- select VLAN_8021Q
- select UBICOM_SWITCH
- select UBICOM_SWITCH_BCM539X
- help
- Ubicom IP7160 RGW Eval, supports:
- 8007-0110 v1.0
- 8007-0111 v1.1
- 8007-0112 v1.2
-
-config IP7160RGWLCD
- bool "IP7160RGWLCD"
- select UBICOM32_V4
- select UBICOM_INPUT
- select NEW_LEDS
- select LEDS_CLASS
- select LEDS_GPIO
- select SPI
- select SPI_UBICOM32_GPIO
- select VLAN_8021Q
- select UBICOM_SWITCH
- select UBICOM_SWITCH_BCM539X
- select INPUT_TOUCHSCREEN
- select TOUCHSCREEN_TSC2007
- select FB
- select FB_UBICOM32_VIRTUAL
- select I2C
- select I2C_GPIO
- help
- Ubicom IP7160 RGW Eval, supports:
- 8007-0112 v1.2 + 8007-1410 v1.0
-
- With Ubicom LCD Adapter
- 8007-0920 v2.0
- 8007-0921 v2.1
-
-
-config IP7160BRINGUP
- bool "IP7160BRINGUP"
- select UBICOM32_V4
- select NEW_LEDS
- select LEDS_CLASS
- select LEDS_GPIO
- help
- Ubicom IP7160 Bringup, supports:
- 8007-0010 v1.0
-
-config IP7160DPF
- bool "IP7160DPF"
- select UBICOM32_V4
- select I2C
- select I2C_GPIO
- select FB
- select FB_UBICOM32
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
- select SND_UBI32
- select SND_UBI32_AUDIO_CS4350
- select UBICOM_HID
- help
- IP7160 Digital Picture Frame board, supports:
- 8007-0211 Rev 1.1
-
-config IP7500MODULE
- bool "IP7500MODULE"
- select UBICOM32_V4
- help
- Ubicom IP7500 CPU Module board, supports:
- 8007-0510 v1.0
- 8007-0510A v1.0
-
- Please see ip7500module.c for more details.
-
-config IP7500AV
- bool "IP7500AV"
- select UBICOM32_V4
- select I2C
- select I2C_GPIO
- select SND_UBI32
- select SND_UBI32_AUDIO_CS4384
- select FB
- select FB_UBICOM32
- help
- Ubicom IP7500 Audio Video board, supports:
- 8007-0810 v1.0
-
- With Ubicom IP7500 CPU Module board:
- 8007-0510 v1.0 -or-
- 8007-0510A v1.0
-
- Please see ip7500av.c for more details.
-
-config IP7500MEDIA
- bool "IP7500MEDIA"
- select UBICOM32_V4
- select UBICOM_INPUT_I2C
- select RTC_CLASS
- select RTC_DRV_S35390A
- select I2C
- select I2C_GPIO
- select GPIO_PCA953X
- select FB
- select FB_UBICOM32
- select FB_UBICOM32_VIRTUAL
- select FB_UBICOM32_VIRTUAL_NOAUTO
- select LCD_CLASS_DEVICE
- select LCD_UBICOM32POWER
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
- select BACKLIGHT_UBICOM32
- select INPUT_TOUCHSCREEN
- select TOUCHSCREEN_TSC2007
- select SOUND
- select SND
- select SND_UBI32
- select SND_UBI32_AUDIO_CS4350
- select MMC_UBICOM32
- select MMC
- select MMC_BLOCK
- help
- IP7500 Media Board w/ IP7500 CPU Module board, supports:
- 8007-0610 v1.0 w/ 8007-0510 v1.0
- 8007-0610 v1.0 w/ 8007-0510 v1.0 NOPHY
- 8007-0610 v1.0 w/ 8007-0511 v1.1 NOPHY
-
- Also supports optional LCD Adapter board:
- 8006-0920 v2.0
- 8006-0921 v2.1
-
- Please see ip7500media.c for more details.
-
-config IP7500WSPKR
- bool "IP7500WSPKR"
- select UBICOM32_V4
- select I2C
- select I2C_GPIO
- select SOUND
- select SND
- select SND_UBI32
- select SND_UBI32_AUDIO_CS4350
- help
- IP7500 Wireless Speaker Board, supports:
- 8007-1210 v1.0
-
- Please see ip7500wspkr.c for more details.
-
-config IP7500IAP
- bool "IP7500IAP"
- select UBICOM32_V4
- select I2C
- select I2C_GPIO
- select FB
- select FB_UBICOM32_VIRTUAL
- select SOUND
- select SND
- select SND_UBI32
- select SND_UBI32_AUDIO_CS4350
- select RTC_CLASS
- select RTC_DRV_S35390A
- select INPUT_TOUCHSCREEN
- select TOUCHSCREEN_TSC2007
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
- select BACKLIGHT_UBICOM32
- help
- IP7500 Internet Audio Player, supports:
- 8007-1110 v1.0
-
- Please see ip7500iap.c for more details.
-
-
- Please see ip7500media.c for more details.
+++ /dev/null
-#
-# arch/ubicom32/mach-ip7k/Makefile
-# Makefile for ip7k based boards.
-#
-# (C) Copyright 2009, Ubicom, Inc.
-#
-# This file is part of the Ubicom32 Linux Kernel Port.
-#
-# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-# it and/or modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation, either version 2 of the
-# License, or (at your option) any later version.
-#
-# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with the Ubicom32 Linux Kernel Port. If not,
-# see <http://www.gnu.org/licenses/>.
-#
-# Ubicom32 implementation derived from (with many thanks):
-# arch/m68knommu
-# arch/blackfin
-# arch/parisc
-#
-
-obj-$(CONFIG_IP7145DPF) += board-ip7145dpf.o
-obj-$(CONFIG_IP7160RGW) += board-ip7160rgw.o
-obj-$(CONFIG_IP7160RGWLCD) += board-ip7160rgw.o
-obj-$(CONFIG_IP7160BRINGUP) += board-ip7160bringup.o
-obj-$(CONFIG_IP7160DPF) += board-ip7160dpf.o
-obj-$(CONFIG_IP7500MODULE) += board-ip7500module.o
-obj-$(CONFIG_IP7500MEDIA) += board-ip7500media.o
-obj-$(CONFIG_IP7500AV) += board-ip7500av.o
-obj-$(CONFIG_IP7500WSPKR) += board-ip7500wspkr.o
-obj-$(CONFIG_IP7500IAP) += board-ip7500iap.o
+++ /dev/null
-/*
- * arch/ubicom32/mach-ip7k/board-ip7145dpf.c
- * Board file for IP7145DPF, rev 1.0, P/N 8007-0410
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <linux/input.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/i2c/pca953x.h>
-
-#include <asm/board.h>
-#include <asm/machdep.h>
-#include <asm/ubicom32input.h>
-#include <asm/ubicom32input_i2c.h>
-#include <asm/ubicom32bl.h>
-#include <asm/ubicom32lcdpower.h>
-#include <asm/vdc_tio.h>
-
-#include <asm/ubicom32sd.h>
-#include <asm/sd_tio.h>
-#include <asm/devtree.h>
-#include <asm/audio.h>
-
-#include <asm/ring_tio.h>
-
-/******************************************************************************
- * SD/IO Port F (Slot 1) platform data
- */
-static struct resource ip7145dpf_portf_sd_resources[] = {
- /*
- * Send IRQ
- */
- [0] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_IRQ,
- },
-
- /*
- * Receive IRQ
- */
- [1] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_IRQ,
- },
-
- /*
- * Memory Mapped Registers
- */
- [2] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct ubicom32sd_card ip7145dpf_portf_sd_cards[] = {
- [0] = {
- .pin_wp = IP7145DPF_IOB0,
- .wp_polarity = 1,
- .pin_pwr = IP7145DPF_IOB4,
- .pin_cd = GPIO_RA_4,
- },
- [1] = {
- .pin_wp = IP7145DPF_IOB1,
- .wp_polarity = 1,
- .pin_pwr = IP7145DPF_IOB5,
- .pin_cd = GPIO_RA_6,
- },
-};
-
-static struct ubicom32sd_platform_data ip7145dpf_portf_sd_platform_data = {
- .ncards = 2,
- .cards = ip7145dpf_portf_sd_cards,
-};
-
-static struct platform_device ip7145dpf_portf_sd_device = {
- .name = "ubicom32sd",
- .id = 0,
- .resource = ip7145dpf_portf_sd_resources,
- .num_resources = ARRAY_SIZE(ip7145dpf_portf_sd_resources),
- .dev = {
- .platform_data = &ip7145dpf_portf_sd_platform_data,
- },
-
-};
-
-/*
- * ip7145dpf_portf_sd_init
- */
-static void ip7145dpf_portf_sd_init(void)
-{
- /*
- * Check the device tree for the sd_tio
- */
- struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portf_sd");
- if (!sd_node) {
- printk(KERN_INFO "PortF SDTIO not found\n");
- return;
- }
-
- /*
- * Fill in the resources and platform data from devtree information
- */
- ip7145dpf_portf_sd_resources[0].start = sd_node->dn.sendirq;
- ip7145dpf_portf_sd_resources[1].start = sd_node->dn.recvirq;
- ip7145dpf_portf_sd_resources[2].start = (u32_t)&(sd_node->regs);
- ip7145dpf_portf_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs);
-
- platform_device_register(&ip7145dpf_portf_sd_device);
-}
-
-/******************************************************************************
- * SD/IO Port B (Slot 2) platform data
- */
-static struct resource ip7145dpf_portb_sd_resources[] = {
- /*
- * Send IRQ
- */
- [0] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_IRQ,
- },
-
- /*
- * Receive IRQ
- */
- [1] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_IRQ,
- },
-
- /*
- * Memory Mapped Registers
- */
- [2] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct ubicom32sd_card ip7145dpf_portb_sd_cards[] = {
- [0] = {
- .pin_wp = IP7145DPF_IOB2,
- .wp_polarity = 1,
- .pin_pwr = IP7145DPF_IOB6,
- .pin_cd = IP7145DPF_IOB3,
- },
-};
-
-static struct ubicom32sd_platform_data ip7145dpf_portb_sd_platform_data = {
- .ncards = 1,
- .cards = ip7145dpf_portb_sd_cards,
-};
-
-static struct platform_device ip7145dpf_portb_sd_device = {
- .name = "ubicom32sd",
- .id = 1,
- .resource = ip7145dpf_portb_sd_resources,
- .num_resources = ARRAY_SIZE(ip7145dpf_portb_sd_resources),
- .dev = {
- .platform_data = &ip7145dpf_portb_sd_platform_data,
- },
-
-};
-
-/*
- * ip7145dpf_portb_sd_init
- */
-static void ip7145dpf_portb_sd_init(void)
-{
- /*
- * Check the device tree for the sd_tio
- */
- struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portb_sd");
- if (!sd_node) {
- printk(KERN_INFO "PortB SDTIO not found\n");
- return;
- }
-
- /*
- * Fill in the resources and platform data from devtree information
- */
- ip7145dpf_portb_sd_resources[0].start = sd_node->dn.sendirq;
- ip7145dpf_portb_sd_resources[1].start = sd_node->dn.recvirq;
- ip7145dpf_portb_sd_resources[2].start = (u32_t)&(sd_node->regs);
- ip7145dpf_portb_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs);
-
- platform_device_register(&ip7145dpf_portb_sd_device);
-}
-
-
-#ifdef IP7145DPF_USE_MMC_SPI
-/******************************************************************************
- * SPI over GPIO (MMC_SPI)
- */
-#include <linux/spi/spi.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/mmc/host.h>
-#include <asm/ubicom32-spi-gpio.h>
-
-#define MMC_CS GPIO_RF_5 // PF5 D3
-#define MMC_CD GPIO_RA_4 // PA4 CD
-#define MMC_WP IP7145DPF_IOB0 // IOB0 WP
-#define MMC_PWR IP7145DPF_IOB4 // IOB4 PWR
-
-/*
- * SPI bus over GPIO (for SD card)
- */
-static struct ubicom32_spi_gpio_platform_data ip7145dpf_spi_gpio_data = {
- .pin_mosi = GPIO_RF_0, // PF0 CMD
- .pin_miso = GPIO_RF_2, // PF2 D0
- .pin_clk = GPIO_RF_1, // PF1 CLK
- .bus_num = 0, // We'll call this SPI bus 0
- .num_chipselect = 1, // only one device on this SPI bus
-};
-
-static struct platform_device ip7145dpf_spi_gpio_device = {
- .name = "ubicom32-spi-gpio",
- .id = 0,
- .dev = {
- .platform_data = &ip7145dpf_spi_gpio_data,
- },
-};
-
-/*
- * ip7145dpf_mmc_spi_setpower_slot_a
- * Set the power state for slot A
- */
-static void ip7145dpf_mmc_spi_setpower_slot_a(struct device *dev, unsigned int vdd)
-{
- struct mmc_spi_platform_data *pd = dev->platform_data;
-
- /*
- * Power is inverted, we could tell the IOB to do it, but it's cleaner this way.
- */
- if ((1 << vdd) & pd->ocr_mask) {
- gpio_set_value(MMC_PWR, 0);
- return;
- }
- gpio_set_value(MMC_PWR, 1);
-}
-
-/*
- * ip7145dpf_mmc_spi_get_cd_slot_a
- * Get the CD bit for slot A
- */
-static int ip7145dpf_mmc_spi_get_cd_slot_a(struct device *dev)
-{
- /*
- * Note that the sense of the GPIO is inverted
- */
- return !gpio_get_value(MMC_CD);
-}
-
-/*
- * ip7145dpf_mmc_spi_get_ro_slot_a
- * Get the WP bit for slot A
- */
-static int ip7145dpf_mmc_spi_get_ro_slot_a(struct device *dev)
-{
- /*
- * Note that the sense of the GPIO is inverted, we could tell the IOB to do it, but
- * it's clearer this way.
- */
- return !gpio_get_value(MMC_WP);
-}
-
-/*
- * ip7145dpf_mmc_spi_exit_slot_a
- * Free the appropriate GPIOs for slot A SD slot.
- */
-static void ip7145dpf_mmc_spi_exit_slot_a(struct device *dev, void *appdata)
-{
- gpio_free(MMC_CD);
- gpio_free(MMC_CS);
- gpio_free(MMC_WP);
- gpio_free(MMC_PWR);
- platform_device_unregister(&ip7145dpf_spi_gpio_device);
-}
-
-/*
- * ip7145dpf_mmc_spi_init_slot_a
- * Allocate the appropriate GPIOs for slot A SD slot.
- * WP is on IOB0, CD is PA4, CS is on PF5
- * TODO: make CD an interrupt
- */
-static int ip7145dpf_mmc_spi_init_slot_a(void)
-{
- int ret = gpio_request(MMC_CD, "mmc-a-cd");
- if (ret) {
- printk(KERN_ERR "%s: could not request mmc-a-cd pin\n", __FUNCTION__);
- return -ENOSYS;
- }
- gpio_direction_input(MMC_CD);
-
- ret = gpio_request(MMC_CS, "mmc-a-cs");
- if (ret) {
- printk(KERN_ERR "%s: could not request mmc-a-cs pin\n", __FUNCTION__);
- goto no_cs;
- }
- gpio_direction_output(MMC_CS, 0);
-
- ret = gpio_request(MMC_WP, "mmc-a-wp");
- if (ret) {
- printk(KERN_ERR "%s: could not request mmc-a-wp pin\n", __FUNCTION__);
- goto no_wp;
- }
- gpio_direction_input(MMC_WP);
-
- /*
- * Start off with power off
- */
- ret = gpio_request(MMC_PWR, "mmc-a-pwr");
- if (ret) {
- printk(KERN_ERR "%s: could not request mmc-a-pwr pin\n", __FUNCTION__);
- goto no_pwr;
- }
- ret = gpio_direction_output(MMC_PWR, 1);
-
- return 0;
-
-no_pwr:
- gpio_free(MMC_WP);
-
-no_wp:
- gpio_free(MMC_CS);
-
-no_cs:
- gpio_free(MMC_CD);
- return -ENOSYS;
-}
-
-/*
- * MMC_SPI driver (currently bitbang)
- */
-static struct mmc_spi_platform_data ip7145dpf_mmc_platform_data = {
- .ocr_mask = MMC_VDD_33_34,
- .exit = ip7145dpf_mmc_spi_exit_slot_a,
- .get_ro = ip7145dpf_mmc_spi_get_ro_slot_a,
- .get_cd = ip7145dpf_mmc_spi_get_cd_slot_a,
-
- .setpower = ip7145dpf_mmc_spi_setpower_slot_a,
- .powerup_msecs = 500,
-
- .detect_delay = 100,
-
- .caps = MMC_CAP_NEEDS_POLL,
-};
-
-static struct ubicom32_spi_gpio_controller_data ip7145dpf_mmc_controller_data = {
- .pin_cs = MMC_CS,
-};
-
-static struct spi_board_info ip7145dpf_spi_board_info[] = {
- {
- .modalias = "mmc_spi",
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 2000000,
- .platform_data = &ip7145dpf_mmc_platform_data,
- .controller_data = &ip7145dpf_mmc_controller_data,
- }
-};
-#endif /* IP7145DPF_USE_MMC_SPI */
-
-/*
- * ip7145dpf_u72_setup
- * Called by I2C to tell us that u72 is setup.
- *
- * This function is called by I2C to tell us that u72 has been setup. All
- * devices which rely on this chip being initialized (or even present) need to
- * be initialized in this function otherwise they may get initialized too early.
- *
- * Currently the only device depending on u72 is the SPI
- */
-static int __init ip7145dpf_u72_setup(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *context)
-{
-#ifdef IP7145DPF_USE_MMC_SPI
- if (ip7145dpf_mmc_spi_init_slot_a()) {
- printk(KERN_ERR "%s: could not request mmc resources\n", __FUNCTION__);
- } else {
- printk(KERN_INFO "%s: registering SPI resources\n", __FUNCTION__);
- spi_register_board_info(ip7145dpf_spi_board_info, ARRAY_SIZE(ip7145dpf_spi_board_info));
- platform_device_register(&ip7145dpf_spi_gpio_device);
- }
-#else
- /*
- * Initialize the Port F/Port B SD slots
- */
- ip7145dpf_portf_sd_init();
- ip7145dpf_portb_sd_init();
-#endif
- return 0;
-}
-
-/******************************************************************************
- * LCD VGH on the board at PE6
- */
-static struct ubicom32lcdpower_platform_data ip7145dpf_lcdpower_data = {
- .vgh_gpio = GPIO_RE_6,
- .vgh_polarity = true,
-};
-
-static struct platform_device ip7145dpf_lcdpower_device = {
- .name = "ubicom32lcdpower",
- .id = -1,
- .dev = {
- .platform_data = &ip7145dpf_lcdpower_data,
- },
-};
-
-/******************************************************************************
- * Backlight on the board PD0, hardware PWM
- */
-static struct ubicom32bl_platform_data ip7145dpf_backlight_data = {
- .type = UBICOM32BL_TYPE_PWM,
- .pwm_channel = 2,
- .pwm_prescale = 15,
- .pwm_period = 60,
- .default_intensity = 0x80,
-};
-
-static struct platform_device ip7145dpf_backlight_device = {
- .name = "ubicom32bl",
- .id = -1,
- .dev = {
- .platform_data = &ip7145dpf_backlight_data,
- },
-};
-
-/******************************************************************************
- * Ubicom32Input on I2C, U48 MAX7310, address 0x18, 8 bits
- */
-static struct ubicom32input_i2c_button ip7145dpf_ubicom32input_i2c_u48_buttons[] = {
- {
- .type = EV_KEY,
- .code = KEY_UP,
- .bit = 0,
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_LEFT,
- .bit = 1,
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_RIGHT,
- .bit = 2,
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_DOWN,
- .bit = 3,
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_ENTER,
- .bit = 4,
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_MENU,
- .bit = 5,
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_ESC,
- .bit = 6,
- .active_low = 1,
- },
-};
-
-static struct ubicom32input_i2c_platform_data ip7145dpf_ubicom32input_i2c_u48_platform_data = {
- .buttons = ip7145dpf_ubicom32input_i2c_u48_buttons,
- .nbuttons = ARRAY_SIZE(ip7145dpf_ubicom32input_i2c_u48_buttons),
- .name = "Ubicom32 Input I2C U48",
-};
-
-/******************************************************************************
- * Additional GPIO chips
- */
-static struct pca953x_platform_data ip7145dpf_gpio_u72_platform_data = {
- .gpio_base = IP7145DPF_U72_BASE,
- .setup = ip7145dpf_u72_setup,
-};
-
-/******************************************************************************
- * Devices on the I2C bus
- */
-static struct i2c_board_info __initdata ip7145dpf_i2c_board_info[] = {
- /*
- * U51, S35390A RTC, address 0x30
- */
- {
- .type = "s35390a",
- .addr = 0x30,
- },
-
- /*
- * U48, MAX7310 IO expander, 8 bits, address 0x18
- */
- {
- .type = "ubicom32in_max7310",
- .addr = 0x18,
- .platform_data = &ip7145dpf_ubicom32input_i2c_u48_platform_data,
- },
-
- /*
- * U72, MAX7310 IOB expander, 8 bits, address 0x19
- */
- {
- .type = "max7310",
- .addr = 0x19,
- .platform_data = &ip7145dpf_gpio_u72_platform_data,
- },
-};
-
-/*
- * I2C bus on the board, SDA PE1, SCL PE2
- */
-static struct i2c_gpio_platform_data ip7145dpf_i2c_data = {
- .sda_pin = GPIO_RE_1,
- .scl_pin = GPIO_RE_2,
- .sda_is_open_drain = 0,
- .scl_is_open_drain = 0,
-};
-
-static struct platform_device ip7145dpf_i2c_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &ip7145dpf_i2c_data,
- },
-};
-
-/******************************************************************************
- * Use ubicom32input driver to monitor the various pushbuttons on this board.
- *
- * WPS PF12
- * FACT_DEFAULT PF13
- * POWER PE4
- *
- * Not sutable for the keypad buttons since those run on I2C GPIO. The polling
- * of ubicom32input would seem to be excessive for this.
- *
- * TODO: pick some ubicom understood EV_xxx define for WPS and Fact Default
- */
-static struct ubicom32input_button ip7145dpf_ubicom32input_buttons[] = {
- {
- .type = EV_KEY,
- .code = KEY_FN_F1,
- .gpio = GPIO_RF_12,
- .desc = "WPS",
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_FN_F2,
- .gpio = GPIO_RF_13,
- .desc = "Factory Default",
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_POWER,
- .gpio = GPIO_RE_4,
- .desc = "Power",
- .active_low = 1,
- },
-};
-
-static struct ubicom32input_platform_data ip7145dpf_ubicom32input_data = {
- .buttons = ip7145dpf_ubicom32input_buttons,
- .nbuttons = ARRAY_SIZE(ip7145dpf_ubicom32input_buttons),
-};
-
-static struct platform_device ip7145dpf_ubicom32input_device = {
- .name = "ubicom32input",
- .id = -1,
- .dev = {
- .platform_data = &ip7145dpf_ubicom32input_data,
- },
-};
-
-/*
- * List of all devices in our system
- */
-static struct platform_device *ip7145dpf_devices[] __initdata = {
- &ip7145dpf_i2c_device,
- &ip7145dpf_lcdpower_device,
- &ip7145dpf_backlight_device,
- &ip7145dpf_ubicom32input_device,
-};
-
-/*
- * ip7145dpf_power_off
- * Called to turn the power off for this board
- */
-static void ip7145dpf_power_off(void)
-{
- gpio_set_value(GPIO_RE_5, 0);
-}
-
-/*
- * ip7145dpf_init
- * Called to add the devices which we have on this board
- */
-static int __init ip7145dpf_init(void)
-{
- int ret;
- struct platform_device *audio_dev;
-
- ubi_gpio_init();
-
-#ifdef CONFIG_UIO_UBICOM32RING
- ring_tio_init("decoder_ring");
-#endif
-
- /*
- * Start up the video driver first
- */
- vdc_tio_init();
-
- /*
- * Take over holding of the power from the system
- */
- ret = gpio_request(GPIO_RE_5, "power_hold");
- if (ret) {
- printk(KERN_ERR "%s: could not request power hold GPIO\n", __FUNCTION__);
- }
- gpio_direction_output(GPIO_RE_5, 1);
- mach_power_off = ip7145dpf_power_off;
-
- /*
- * USB SEL_HOST_USB line
- */
- ret = gpio_request(GPIO_RF_11, "SEL_HOST_USB");
- if (ret) {
- printk(KERN_ERR "%s: could not request SEL_HOST_USB GPIO\n", __FUNCTION__);
- }
- gpio_direction_output(GPIO_RF_11, 0);
-
- /*
- * Setup audio
- */
- audio_dev = audio_device_alloc("snd-ubi32-generic", "audio", "audio-i2sout", 0);
- if (audio_dev) {
- platform_device_register(audio_dev);
- }
-
- /*
- * Register all of the devices we have on this board
- */
- printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
- platform_add_devices(ip7145dpf_devices, ARRAY_SIZE(ip7145dpf_devices));
-
- /*
- * Register all of the devices which sit on the I2C bus
- */
- printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
- i2c_register_board_info(0, ip7145dpf_i2c_board_info, ARRAY_SIZE(ip7145dpf_i2c_board_info));
-
- /*
- * We have to initialize the SPI after the I2C IOB gets setup. SPI is initialized in
- * ip7145dpf_u72_setup
- */
-
- return 0;
-}
-
-arch_initcall(ip7145dpf_init);
+++ /dev/null
-/*
- * arch/ubicom32/mach-ip7k/board-ip7160bringup.c
- * Support for the IP7160 bringup board.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-
-#include <asm/board.h>
-#include <asm/machdep.h>
-#include <asm/ubicom32input.h>
-
-#ifdef CONFIG_SERIAL_UBI32_SERDES
-#include <asm/ubicom32suart.h>
-#endif
-
-/*
- * Use ubicom32input driver to monitor the various pushbuttons on this board.
- *
- * WPS PD5
- * FACT_DEFAULT PD6
- *
- * TODO: pick some ubicom understood EV_xxx define for WPS and Fact Default
- */
-static struct ubicom32input_button ip7160bringup_ubicom32input_buttons[] = {
- {
- .type = EV_KEY,
- .code = KEY_FN_F1,
- .gpio = GPIO_RD_5,
- .desc = "WPS",
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_FN_F2,
- .gpio = GPIO_RD_6,
- .desc = "Factory Default",
- .active_low = 1,
- },
-};
-
-static struct ubicom32input_platform_data ip7160bringup_ubicom32input_data = {
- .buttons = ip7160bringup_ubicom32input_buttons,
- .nbuttons = ARRAY_SIZE(ip7160bringup_ubicom32input_buttons),
-};
-
-static struct platform_device ip7160bringup_ubicom32input_device = {
- .name = "ubicom32input",
- .id = -1,
- .dev = {
- .platform_data = &ip7160bringup_ubicom32input_data,
- },
-};
-
-#ifdef CONFIG_SERIAL_UBI32_SERDES
-static struct resource ip7160bringup_ubicom32_suart_resources[] = {
- {
- .start = RE,
- .end = RE,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PORT_OTHER_INT(RE),
- .end = PORT_OTHER_INT(RE),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = 250000000,
- .end = 250000000,
- .flags = UBICOM32_SUART_IORESOURCE_CLOCK,
- },
-};
-
-static struct platform_device ip7160bringup_ubicom32_suart_device = {
- .name = "ubicom32suart",
- .id = -1,
- .num_resources = ARRAY_SIZE(ip7160bringup_ubicom32_suart_resources),
- .resource = ip7160bringup_ubicom32_suart_resources,
-};
-#endif
-
-/*
- * List of all devices in our system
- */
-static struct platform_device *ip7160bringup_devices[] __initdata = {
-#ifdef CONFIG_SERIAL_UBI32_SERDES
- &ip7160bringup_ubicom32_suart_device,
-#endif
- &ip7160bringup_ubicom32input_device,
-};
-
-/*
- * ip7160bringup_init
- * Called to add the devices which we have on this board
- */
-static int __init ip7160bringup_init(void)
-{
- board_init();
-
- ubi_gpio_init();
-
- printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
- platform_add_devices(ip7160bringup_devices, ARRAY_SIZE(ip7160bringup_devices));
-
- return 0;
-}
-
-arch_initcall(ip7160bringup_init);
+++ /dev/null
-/*
- * arch/ubicom32/mach-ip7k/board-ip7160dpf.c
- * Platform initialization for ip7160dpf board.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-
-#include <linux/input.h>
-
-#include <asm/board.h>
-#include <asm/machdep.h>
-#include <asm/ubicom32hid.h>
-#include <asm/vdc_tio.h>
-#include <asm/audio.h>
-
-/*
- * Backlight on the board PD0, hardware PWM
- */
-static const struct ubicom32hid_button ip7160dpf_ubicom32hid_buttons[] = {
- {
- .type = EV_KEY,
- .code = KEY_UP,
- .bit = 0,
- },
- {
- .type = EV_KEY,
- .code = KEY_LEFT,
- .bit = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_RIGHT,
- .bit = 2,
- },
- {
- .type = EV_KEY,
- .code = KEY_DOWN,
- .bit = 3,
- },
- {
- .type = EV_KEY,
- .code = KEY_ENTER,
- .bit = 4,
- },
- {
- .type = EV_KEY,
- .code = KEY_MENU,
- .bit = 5,
- },
- {
- .type = EV_KEY,
- .code = KEY_ESC,
- .bit = 7,
- },
-};
-
-static const struct ubicom32hid_ir ip7160dpf_ubicom32hid_ircodes[] = {
- {
- .type = EV_KEY,
- .code = KEY_UP,
- .ir_code = 0xF807916E
- },
- {
- .type = EV_KEY,
- .code = KEY_DOWN,
- .ir_code = 0xF20D916E
- },
- {
- .type = EV_KEY,
- .code = KEY_LEFT,
- .ir_code = 0xF609916E
- },
- {
- .type = EV_KEY,
- .code = KEY_RIGHT,
- .ir_code = 0xF40B916E
- },
- {
- .type = EV_KEY,
- .code = KEY_ENTER,
- .ir_code = 0xF50A916E
- },
- { /* rotate */
- .type = EV_KEY,
- .code = KEY_FN_F1,
- .ir_code = 0xF906916E
- },
- {
- .type = EV_KEY,
- .code = KEY_MENU,
- .ir_code = 0xF708916E
- },
- { /* font size */
- .type = EV_KEY,
- .code = KEY_FN_F2,
- .ir_code = 0xF30C916E
- },
- {
- .type = EV_KEY,
- .code = KEY_ESC,
- .ir_code = 0xF10E916E
- },
- {
- .type = EV_KEY,
- .code = KEY_VOLUMEUP,
- .ir_code = 0xF00F916E
- },
- {
- .type = EV_KEY,
- .code = KEY_VOLUMEDOWN,
- .ir_code = 0xED12916E
- },
- {
- .type = EV_KEY,
- .code = KEY_MUTE,
- .ir_code = 0xEA15916E
- },
- {
- .type = EV_KEY,
- .code = KEY_INFO,
- .ir_code = 0xEF10916E
- },
- { /* Like */
- .type = EV_KEY,
- .code = KEY_FN_F3,
- .ir_code = 0xEE11916E
- },
- { /* Dislike */
- .type = EV_KEY,
- .code = KEY_FN_F4,
- .ir_code = 0xEB14916E
- },
- {
- .type = EV_KEY,
- .code = KEY_POWER,
- .ir_code = 0xFD02916E
- },
-};
-
-static struct ubicom32hid_platform_data ip7160dpf_ubicom32hid_platform_data = {
- .gpio_reset = GPIO_RI_5,
- .gpio_reset_polarity = 0,
- .type = UBICOM32HID_BL_TYPE_PWM,
- .invert = 0,
- .default_intensity = 128,
- .buttons = ip7160dpf_ubicom32hid_buttons,
- .nbuttons = ARRAY_SIZE(ip7160dpf_ubicom32hid_buttons),
- .ircodes = ip7160dpf_ubicom32hid_ircodes,
- .nircodes = ARRAY_SIZE(ip7160dpf_ubicom32hid_ircodes),
-};
-
-/*
- * Devices on the I2C bus
- * This board has a "bus 2" which is isolated from the main bus by U47
- * and pin RI0. It should be safe to always enable bus 2 by setting
- * RI0 to low, however, it should be noted that on all existing configurations
- * of this board, U49 and U51 are not populated.
- */
-static struct i2c_board_info __initdata ip7160dpf_i2c_board_info[] = {
- /*
- * U37, CS4350 DAC, address 0x4B, bus 2
- * THIS ENTRY MUST BE FIRST
- */
- {
- .type = "cs4350",
- .addr = 0x4B,
- }
-
- /*
- * U24, ubicom32hid
- */
- {
- .type = "ubicom32hid",
- .addr = 0x08,
- .platform_data = &ip7160dpf_ubicom32hid_platform_data,
- },
-
- /*
- * U49, ISL29001 Ambient Light Sensor, address 0x44, bus 2 (may not be stuffed)
- */
-
- /*
- * U51, S35390A RTC, address 0x30, bus 2 (may not be stuffed)
- */
-#ifdef CONFIG_RTC_DRV_S35390A
- {
- .type = "s35390a",
- .addr = 0x30,
- },
-#endif
-};
-
-/*
- * I2C bus on the board, SDA PI1, SCL PI2
- */
-static struct i2c_gpio_platform_data ip7160dpf_i2c_data = {
- .sda_pin = GPIO_RI_1,
- .scl_pin = GPIO_RI_2,
- .sda_is_open_drain = 0,
- .scl_is_open_drain = 0,
- .scl_is_output_only = 1,
- .udelay = 6,
-};
-
-static struct platform_device ip7160dpf_i2c_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &ip7160dpf_i2c_data,
- },
-};
-
-/*
- * List of all devices in our system
- */
-static struct platform_device *ip7160dpf_devices[] __initdata = {
- &ip7160dpf_i2c_device,
-};
-
-/*
- * ip7160dpf_power_off
- * Called to turn the power off for this board
- */
-static void ip7160dpf_power_off(void)
-{
- gpio_set_value(GPIO_RF_14, 0);
-}
-
-/*
- * ip7160dpf_init
- * Called to add the devices which we have on this board
- */
-static int __init ip7160dpf_init(void)
-{
- int ret;
- struct platform_device *audio_dev;
-
- ubi_gpio_init();
-
- /*
- * Hold the POWER_HOLD line
- */
- ret = gpio_request(GPIO_RF_14, "POWER_HOLD");
- if (ret) {
- printk(KERN_ERR "%s: could not request POWER_HOLD GPIO\n", __FUNCTION__);
- }
- gpio_direction_output(GPIO_RF_14, 1);
- mach_power_off = ip7160dpf_power_off;
-
- /*
- * USB SEL_HOST_USB line
- */
- ret = gpio_request(GPIO_RI_13, "SEL_HOST_USB");
- if (ret) {
- printk(KERN_ERR "%s: could not request SEL_HOST_USB GPIO\n", __FUNCTION__);
- }
- gpio_direction_output(GPIO_RI_13, 0);
-
- /*
- * USB/DAC nRESET line
- */
- ret = gpio_request(GPIO_RI_3, "USB_DAC_nRESET");
- if (ret) {
- printk(KERN_ERR "%s: could not request USB_DAC_nRESET GPIO\n", __FUNCTION__);
- }
- gpio_direction_output(GPIO_RI_3, 0);
- udelay(1);
- gpio_direction_output(GPIO_RI_3, 1);
-
- /*
- * I2C BUS2 Disable line
- */
- ret = gpio_request(GPIO_RI_0, "DISABLE_BUS2");
- if (ret) {
- printk(KERN_ERR "%s: could not request DISABLE_BUS2 GPIO\n", __FUNCTION__);
- }
- gpio_direction_output(GPIO_RI_0, 0);
-
- vdc_tio_init();
-
- printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
- platform_add_devices(ip7160dpf_devices, ARRAY_SIZE(ip7160dpf_devices));
-
- /*
- * Allocate the audio driver if we can
- */
- audio_dev = audio_device_alloc("snd-ubi32-cs4350", "audio-i2sout", 0);
- if (audio_dev) {
- ip7160dpf_i2c_board_info[0].platform_data = audio_dev;
- }
-
- printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
- i2c_register_board_info(0, ip7160dpf_i2c_board_info, ARRAY_SIZE(ip7160dpf_i2c_board_info));
-
- return 0;
-}
-
-arch_initcall(ip7160dpf_init);
+++ /dev/null
-/*
- * arch/ubicom32/mach-ip7k/board-ip7160rgw.c
- * Platform initialization for ip7160rgw board.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/spi/spi.h>
-
-#include <asm/board.h>
-#include <asm/machdep.h>
-#include <asm/ubicom32input.h>
-
-#ifdef CONFIG_SERIAL_UBI32_SERDES
-#include <asm/ubicom32suart.h>
-#endif
-
-#include <asm/ubicom32-spi-gpio.h>
-#include <asm/switch-dev.h>
-
-#ifdef CONFIG_IP7160RGWLCD
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-/*
- * LCD Adapter board 8007-092x support
- *
- * Touch controller
- *
- * Connected via I2C bus, interrupt on PA6
- */
-#include <linux/i2c/tsc2007.h>
-
-/*
- * ip7160rgwlcd_tsc2007_exit_platform_hw
- */
-static void ip7160rgwlcd_tsc2007_exit_platform_hw(void)
-{
- UBICOM32_IO_PORT(RA)->ctl0 &= ~(0x03 << 17);
- gpio_free(GPIO_RA_5);
-}
-
-/*
- * ip7160rgwlcd_tsc2007_init_platform_hw
- */
-static int ip7160rgwlcd_tsc2007_init_platform_hw(void)
-{
- int res = gpio_request(GPIO_RA_5, "TSC2007_IRQ");
- if (res) {
- return res;
- }
-
- UBICOM32_IO_PORT(RA)->ctl0 &= ~(0x03 << 17);
- UBICOM32_IO_PORT(RA)->ctl0 |= (0x02 << 17);
- return 0;
-}
-
-/*
- * ip7160rgwlcd_tsc2007_get_pendown_state
- */
-static int ip7160rgwlcd_tsc2007_get_pendown_state(void)
-{
- return !gpio_get_value(GPIO_RA_5);
-}
-
-static struct tsc2007_platform_data ip7160rgwlcd_tsc2007_data = {
- .model = 2007,
- .x_plate_ohms = 350,
- .get_pendown_state = ip7160rgwlcd_tsc2007_get_pendown_state,
- .init_platform_hw = ip7160rgwlcd_tsc2007_init_platform_hw,
- .exit_platform_hw = ip7160rgwlcd_tsc2007_exit_platform_hw,
-};
-
-/******************************************************************************
- * I2C bus on the board, SDA PI14, SCL PI13
- */
-static struct i2c_gpio_platform_data ip7160rgwlcd_i2c_data = {
- .sda_pin = GPIO_RI_14,
- .scl_pin = GPIO_RI_13,
- .sda_is_open_drain = 0,
- .scl_is_open_drain = 0,
- .udelay = 50,
-};
-
-static struct platform_device ip7160rgwlcd_i2c_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &ip7160rgwlcd_i2c_data,
- },
-};
-
-static struct i2c_board_info __initdata ip7160rgwlcd_i2c_board_info[] = {
- {
- .type = "tsc2007",
- .addr = 0x48,
- .irq = 45, // RA5
- .platform_data = &ip7160rgwlcd_tsc2007_data,
- },
-};
-
-#endif
-
-/*
- * SPI bus over GPIO for Gigabit Ethernet Switch
- * U58:
- * MOSI PE0
- * MISO PE1
- * CLK PE3
- * CS PE2
- */
-static struct ubicom32_spi_gpio_platform_data ip7160rgw_spi_gpio_data = {
- .pin_mosi = GPIO_RE_0,
- .pin_miso = GPIO_RE_1,
- .pin_clk = GPIO_RE_3,
- .bus_num = 0, // We'll call this SPI bus 0
- .num_chipselect = 1, // only one device on this SPI bus
- .clk_default = 1,
-};
-
-static struct platform_device ip7160rgw_spi_gpio_device = {
- .name = "ubicom32-spi-gpio",
- .id = 0,
- .dev = {
- .platform_data = &ip7160rgw_spi_gpio_data,
- },
-};
-
-static struct ubicom32_spi_gpio_controller_data ip7160rgw_bcm539x_controller_data = {
- .pin_cs = GPIO_RE_2,
-};
-
-static struct switch_core_platform_data ip7160rgw_bcm539x_platform_data = {
- .flags = SWITCH_DEV_FLAG_HW_RESET,
- .pin_reset = GPIO_RE_4,
- .name = "bcm539x",
-};
-
-static struct spi_board_info ip7160rgw_spi_board_info[] = {
- {
- .modalias = "bcm539x-spi",
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 2000000,
- .platform_data = &ip7160rgw_bcm539x_platform_data,
- .controller_data = &ip7160rgw_bcm539x_controller_data,
- .mode = SPI_MODE_3,
- }
-};
-
-/*
- * LEDs
- *
- * WLAN1 PD0 (PWM capable)
- * WLAN2 PD1
- * USB2.0 PD2
- * Status PD3
- * WPS PD4
- *
- * TODO: check triggers, are they generic?
- */
-static struct gpio_led ip7160rgw_gpio_leds[] = {
- {
- .name = "d53:green:WLAN1",
- .default_trigger = "WLAN1",
- .gpio = GPIO_RD_0,
- .active_low = 1,
- },
- {
- .name = "d54:green:WLAN2",
- .default_trigger = "WLAN2",
- .gpio = GPIO_RD_1,
- .active_low = 1,
- },
- {
- .name = "d55:green:USB",
- .default_trigger = "USB",
- .gpio = GPIO_RD_2,
- .active_low = 1,
- },
- {
- .name = "d56:green:Status",
- .default_trigger = "Status",
- .gpio = GPIO_RD_3,
- .active_low = 1,
- },
- {
- .name = "d57:green:WPS",
- .default_trigger = "WPS",
- .gpio = GPIO_RD_4,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data ip7160rgw_gpio_led_platform_data = {
- .num_leds = 5,
- .leds = ip7160rgw_gpio_leds,
-};
-
-static struct platform_device ip7160rgw_gpio_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &ip7160rgw_gpio_led_platform_data,
- },
-};
-
-/*
- * Use ubicom32input driver to monitor the various pushbuttons on this board.
- *
- * WPS PD5
- * FACT_DEFAULT PD6
- *
- * TODO: pick some ubicom understood EV_xxx define for WPS and Fact Default
- */
-static struct ubicom32input_button ip7160rgw_ubicom32input_buttons[] = {
- {
- .type = EV_KEY,
- .code = KEY_FN_F1,
- .gpio = GPIO_RD_5,
- .desc = "WPS",
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_FN_F2,
- .gpio = GPIO_RD_6,
- .desc = "Factory Default",
- .active_low = 1,
- },
-};
-
-static struct ubicom32input_platform_data ip7160rgw_ubicom32input_data = {
- .buttons = ip7160rgw_ubicom32input_buttons,
- .nbuttons = ARRAY_SIZE(ip7160rgw_ubicom32input_buttons),
-};
-
-static struct platform_device ip7160rgw_ubicom32input_device = {
- .name = "ubicom32input",
- .id = -1,
- .dev = {
- .platform_data = &ip7160rgw_ubicom32input_data,
- },
-};
-
-#ifdef CONFIG_SERIAL_UBI32_SERDES
-static struct resource ip7160rgw_ubicom32_suart_resources[] = {
- {
- .start = RE,
- .end = RE,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PORT_OTHER_INT(RE),
- .end = PORT_OTHER_INT(RE),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = 250000000,
- .end = 250000000,
- .flags = UBICOM32_SUART_IORESOURCE_CLOCK,
- },
-};
-
-static struct platform_device ip7160rgw_ubicom32_suart_device = {
- .name = "ubicom32suart",
- .id = -1,
- .num_resources = ARRAY_SIZE(ip7160rgw_ubicom32_suart_resources),
- .resource = ip7160rgw_ubicom32_suart_resources,
-};
-#endif
-
-/*
- * List of all devices in our system
- */
-static struct platform_device *ip7160rgw_devices[] __initdata = {
-#ifdef CONFIG_SERIAL_UBI32_SERDES
- &ip7160rgw_ubicom32_suart_device,
-#endif
- &ip7160rgw_ubicom32input_device,
- &ip7160rgw_gpio_leds_device,
- &ip7160rgw_spi_gpio_device,
-#ifdef CONFIG_IP7160RGWLCD
- &ip7160rgwlcd_i2c_device,
-#endif
-};
-
-/*
- * ip7160rgw_init
- * Called to add the devices which we have on this board
- */
-static int __init ip7160rgw_init(void)
-{
- board_init();
-
- /*
- * Rev 1.2 boards have spi in a different place than 1.1/1.0
- */
- if (strcmp(board_get_revision(), "1.2") == 0) {
- ip7160rgw_spi_gpio_data.pin_mosi = GPIO_RD_7;
- }
-
- ubi_gpio_init();
-
- /*
- * Reserve switch SPI CS on behalf on switch driver
- */
- if (gpio_request(ip7160rgw_bcm539x_controller_data.pin_cs, "switch-bcm539x-cs")) {
- printk(KERN_WARNING "Could not request cs of switch SPI I/F\n");
- return -EIO;
- }
- gpio_direction_output(ip7160rgw_bcm539x_controller_data.pin_cs, 1);
-
- printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
- platform_add_devices(ip7160rgw_devices, ARRAY_SIZE(ip7160rgw_devices));
-
- printk(KERN_INFO "%s: registering SPI resources\n", __FUNCTION__);
- spi_register_board_info(ip7160rgw_spi_board_info, ARRAY_SIZE(ip7160rgw_spi_board_info));
-
-#ifdef CONFIG_IP7160RGWLCD
- printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
- i2c_register_board_info(0, ip7160rgwlcd_i2c_board_info, ARRAY_SIZE(ip7160rgwlcd_i2c_board_info));
- printk(KERN_INFO "IP7160 RGW + LCD\n");
-#else
- printk(KERN_INFO "IP7160 RGW\n");
-#endif
- return 0;
-}
-
-arch_initcall(ip7160rgw_init);
+++ /dev/null
-/*
- * arch/ubicom32/mach-ip7k/board-ip7500av.c
- * Support for IP7500 Audio Video Board + CPU module board.
- *
- * This file supports the IP7500 Audio Video Board:
- * 8007-0810 Rev 1.0
- * with one of the following CPU module boards:
- * 8007-0510 Rev 1.0
- * 8007-0510A Rev 1.0 (with ethernet)
- *
- * DIP Switch SW2 configuration: (*) default
- * POS 1: on(*) = PCI enabled, off = PCI disabled
- * POS 2: on(*) = TTYX => PA6, off = TTYX => PF12
- * POS 3: on(*) = TTYY => PA7, off = TTYY => PF15
- * POS 4: unused
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/delay.h>
-#include <asm/board.h>
-#include <asm/machdep.h>
-#include <asm/ring_tio.h>
-#include <asm/vdc_tio.h>
-#include <asm/audio.h>
-#include <asm/ubi32-pcm.h>
-#include <asm/ubi32-cs4384.h>
-
-/******************************************************************************
- * Devices on the I2C bus
- *
- * BEWARE of changing the order of things in this array as we depend on
- * certain things to be in certain places.
- */
-static struct i2c_board_info __initdata ip7500av_i2c_board_info[] = {
- /*
- * U6, CS4384 DAC, address 0x19
- */
- {
- .type = "cs4384",
- .addr = 0x19,
- },
-};
-
-/*
- * I2C bus on the board, SDA PD1, SCL PD2
- */
-static struct i2c_gpio_platform_data ip7500av_i2c_data = {
- .sda_pin = GPIO_RD_6,
- .scl_pin = GPIO_RD_3,
- .sda_is_open_drain = 0,
- .scl_is_open_drain = 0,
- .udelay = 50,
-};
-
-static struct platform_device ip7500av_i2c_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &ip7500av_i2c_data,
- },
-};
-
-/*
- * List of possible mclks we can generate. This depends on the CPU frequency.
- */
-static struct ubi32_cs4384_mclk_entry ip7500av_cs4384_mclk_entries[] = {
- {
- .rate = 12288000,
- .div = 44,
- },
- {
- .rate = 11289600,
- .div = 48,
- },
-};
-
-/*
- * List of all devices in our system
- */
-static struct platform_device *ip7500av_devices[] __initdata = {
- &ip7500av_i2c_device,
-};
-
-/*
- * ip7500av_vdac_write
- */
-static int __init ip7500av_vdac_write(int reg, int val)
-{
- struct i2c_adapter *adap;
- struct i2c_msg msg[1];
- unsigned char data[2];
- int err;
-
- adap = i2c_get_adapter(0);
- if (!adap) {
- printk(KERN_WARNING "%s: failed to get i2c adapter\n", __FUNCTION__);
- return -ENODEV;
- }
- msg->addr = 0x2B;
- msg->flags = 0;
- msg->len = 2;
- msg->buf = data;
- data[0] = reg;
- data[1] = val;
- err = i2c_transfer(adap, msg, 1);
- i2c_put_adapter(adap);
- if (err >= 0) {
- return 0;
- }
- return err;
-}
-
-/*
- * ip7500av_vdac_init
- * Initializes the video DAC via I2C
- *
- * Equivalent mode line: 720x480p = 27 Mhz, 720 736 800 858 480 484 492 525
- */
-static int __init ip7500av_vdac_init(void)
-{
- int err;
-
- printk(KERN_INFO "Initializing ADV7393 DAC\n");
-
- /*
- * Reset the VDAC
- */
- if (gpio_request(GPIO_RF_6, "VDAC Reset")) {
- printk(KERN_WARNING "%s: failed to allocate VDAC Reset\n", __FUNCTION__);
- return -EBUSY;
- }
- gpio_direction_output(GPIO_RF_6, 0);
- udelay(1);
- gpio_set_value(GPIO_RF_6, 1);
-
- /*
- * See table 100 of ADV7393 data sheet: 16-bit 525p YCrCb In, YPbPr Out
- */
- err = ip7500av_vdac_write(0x17, 0x02);
- if (err) {
- printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__);
- return err;
- }
- err = ip7500av_vdac_write(0x00, 0x1c);
- if (err) {
- printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__);
- return err;
- }
- err = ip7500av_vdac_write(0x01, 0x10);
- if (err) {
- printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__);
- return err;
- }
- err = ip7500av_vdac_write(0x31, 0x01);
- if (err) {
- printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__);
- return err;
- }
-#ifdef IP7500AV_VDAC_SWAP_PBPR
- err = ip7500av_vdac_write(0x35, 0x08);
- if (err) {
- printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__);
- return err;
- }
-#endif
-#ifdef IP7500AV_VDAC_FULL_RANGE
- err = ip7500av_vdac_write(0x30, 0x02);
- if (err) {
- printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__);
- return err;
- }
-#endif
- return 0;
-}
-late_initcall(ip7500av_vdac_init);
-
-/*
- * ip7500av_init
- * Called to add the devices which we have on this board
- */
-static int __init ip7500av_init(void)
-{
- struct platform_device *audio_dev;
- struct platform_device *audio_dev2;
- struct ubi32_cs4384_platform_data *cs4384_pd;
-
- board_init();
-
- ubi_gpio_init();
-
- vdc_tio_init();
-
- printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
- platform_add_devices(ip7500av_devices, ARRAY_SIZE(ip7500av_devices));
-
- /*
- * CS4384 DAC
- */
- audio_dev = audio_device_alloc("snd-ubi32-cs4384", "audio", "audio-i2sout",
- sizeof(struct ubi32_cs4384_platform_data));
- if (audio_dev) {
- /*
- * Attempt to figure out a good divisor. This will only work
- * assuming the core frequency is compatible.
- */
- int i;
- unsigned int freq = processor_frequency();
- for (i = 0; i < ARRAY_SIZE(ip7500av_cs4384_mclk_entries); i++) {
- unsigned int div;
- unsigned int rate = ip7500av_cs4384_mclk_entries[i].rate / 1000;
- div = ((freq / rate) + 500) / 1000;
- ip7500av_cs4384_mclk_entries[i].div = div;
- printk("CS4384 mclk %d rate %u000Hz div %u act %u\n", i, rate, div, freq / div);
- }
-
- cs4384_pd = audio_device_priv(audio_dev);
- cs4384_pd->mclk_src = UBI32_CS4384_MCLK_PWM_0;
- cs4384_pd->n_mclk = ARRAY_SIZE(ip7500av_cs4384_mclk_entries);
- cs4384_pd->mclk_entries = ip7500av_cs4384_mclk_entries;
- ip7500av_i2c_board_info[0].platform_data = audio_dev;
-
- /*
- * Reset the DAC
- */
- if (gpio_request(GPIO_RF_4, "DAC Reset") == 0) {
- gpio_direction_output(GPIO_RF_4, 0);
- udelay(1);
- gpio_direction_output(GPIO_RF_4, 1);
- } else {
- printk("Unable to request DAC reset GPIO\n");
- }
- }
-
- /*
- * SPDIF port
- */
- audio_dev2 = audio_device_alloc("snd-ubi32-generic", "audio", "audio-spdifout", 0);
- if (audio_dev2) {
- platform_device_register(audio_dev2);
- }
-
- /*
- * Register all of the devices which sit on the I2C bus
- */
- printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
- i2c_register_board_info(0, ip7500av_i2c_board_info, ARRAY_SIZE(ip7500av_i2c_board_info));
-
- printk(KERN_INFO "IP7500 Audio/Video Board\n");
- return 0;
-}
-arch_initcall(ip7500av_init);
+++ /dev/null
-/*
- * arch/ubicom32/mach-ip7k/board-ip7500iap.c
- * Support for IP7500 Internet Audio Player
- *
- * This file supports the IP7500 Internet Audio Player:
- * 8007-1110 Rev 1.0
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <asm/board.h>
-
-#include <linux/delay.h>
-
-#include <linux/platform_device.h>
-#include <asm/audio.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-
-#include <asm/ubicom32sd.h>
-#include <asm/sd_tio.h>
-
-#include <asm/ubicom32bl.h>
-
-#include <asm/machdep.h>
-
-/******************************************************************************
- * SD/IO Port F (Slot 1) platform data
- */
-static struct resource ip7500iap_portf_sd_resources[] = {
- /*
- * Send IRQ
- */
- [0] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_IRQ,
- },
-
- /*
- * Receive IRQ
- */
- [1] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_IRQ,
- },
-
- /*
- * Memory Mapped Registers
- */
- [2] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct ubicom32sd_card ip7500iap_portf_sd_cards[] = {
- [0] = {
- .pin_wp = GPIO_RF_7,
- .wp_polarity = 1,
- .pin_pwr = GPIO_RF_8,
- .pin_cd = GPIO_RF_6,
- },
-};
-
-static struct ubicom32sd_platform_data ip7500iap_portf_sd_platform_data = {
- .ncards = 1,
- .cards = ip7500iap_portf_sd_cards,
-};
-
-static struct platform_device ip7500iap_portf_sd_device = {
- .name = "ubicom32sd",
- .id = 0,
- .resource = ip7500iap_portf_sd_resources,
- .num_resources = ARRAY_SIZE(ip7500iap_portf_sd_resources),
- .dev = {
- .platform_data = &ip7500iap_portf_sd_platform_data,
- },
-
-};
-
-/*
- * ip7500iap_portf_sd_init
- */
-static void ip7500iap_portf_sd_init(void)
-{
- /*
- * Check the device tree for the sd_tio
- */
- struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portf_sd");
- if (!sd_node) {
- printk(KERN_INFO "PortF SDTIO not found\n");
- return;
- }
-
- /*
- * Fill in the resources and platform data from devtree information
- */
- ip7500iap_portf_sd_resources[0].start = sd_node->dn.sendirq;
- ip7500iap_portf_sd_resources[1].start = sd_node->dn.recvirq;
- ip7500iap_portf_sd_resources[2].start = (u32_t)&(sd_node->regs);
- ip7500iap_portf_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs);
-
- platform_device_register(&ip7500iap_portf_sd_device);
-}
-
-/******************************************************************************
- * SD/IO Port B (Slot 2) platform data
- */
-static struct resource ip7500iap_portb_sd_resources[] = {
- /*
- * Send IRQ
- */
- [0] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_IRQ,
- },
-
- /*
- * Receive IRQ
- */
- [1] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_IRQ,
- },
-
- /*
- * Memory Mapped Registers
- */
- [2] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct ubicom32sd_card ip7500iap_portb_sd_cards[] = {
- [0] = {
- .pin_wp = GPIO_RB_13,
- .wp_polarity = 1,
- .pin_pwr = GPIO_RB_11,
- .pin_cd = GPIO_RB_12,
- },
-};
-
-static struct ubicom32sd_platform_data ip7500iap_portb_sd_platform_data = {
- .ncards = 1,
- .cards = ip7500iap_portb_sd_cards,
-};
-
-static struct platform_device ip7500iap_portb_sd_device = {
- .name = "ubicom32sd",
- .id = 1,
- .resource = ip7500iap_portb_sd_resources,
- .num_resources = ARRAY_SIZE(ip7500iap_portb_sd_resources),
- .dev = {
- .platform_data = &ip7500iap_portb_sd_platform_data,
- },
-
-};
-
-/*
- * ip7500iap_portb_sd_init
- */
-static void ip7500iap_portb_sd_init(void)
-{
- /*
- * Check the device tree for the sd_tio
- */
- struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portb_sd");
- if (!sd_node) {
- printk(KERN_INFO "PortB SDTIO not found\n");
- return;
- }
-
- /*
- * Fill in the resources and platform data from devtree information
- */
- ip7500iap_portb_sd_resources[0].start = sd_node->dn.sendirq;
- ip7500iap_portb_sd_resources[1].start = sd_node->dn.recvirq;
- ip7500iap_portb_sd_resources[2].start = (u32_t)&(sd_node->regs);
- ip7500iap_portb_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs);
-
- platform_device_register(&ip7500iap_portb_sd_device);
-}
-
-/******************************************************************************
- * Touch controller
- *
- * Connected via I2C bus, interrupt on PA6
- */
-#include <linux/i2c/tsc2007.h>
-
-/*
- * ip7500iap_tsc2007_exit_platform_hw
- */
-static void ip7500iap_tsc2007_exit_platform_hw(void)
-{
- UBICOM32_IO_PORT(RA)->ctl0 &= ~(0x03 << 19);
- gpio_free(GPIO_RA_6);
-}
-
-/*
- * ip7500iap_tsc2007_init_platform_hw
- */
-static int ip7500iap_tsc2007_init_platform_hw(void)
-{
- int res = gpio_request(GPIO_RA_6, "TSC2007_IRQ");
- if (res) {
- return res;
- }
-
- UBICOM32_IO_PORT(RA)->ctl0 &= ~(0x03 << 19);
- UBICOM32_IO_PORT(RA)->ctl0 |= (0x02 << 19);
- return 0;
-}
-
-/*
- * ip7500iap_tsc2007_get_pendown_state
- */
-static int ip7500iap_tsc2007_get_pendown_state(void)
-{
- return !gpio_get_value(GPIO_RA_6);
-}
-
-static struct tsc2007_platform_data ip7500iap_tsc2007_data = {
- .model = 2007,
- .x_plate_ohms = 350,
- .get_pendown_state = ip7500iap_tsc2007_get_pendown_state,
- .init_platform_hw = ip7500iap_tsc2007_init_platform_hw,
- .exit_platform_hw = ip7500iap_tsc2007_exit_platform_hw,
-};
-
-/******************************************************************************
- * i2c devices
- *
- * DO NOT CHANGE THE ORDER HERE unless you know how this works. There
- * are hardcoded indicies which refer to the order of drivers listed here.
- */
-static struct i2c_board_info __initdata ip7500iap_i2c_board_info[] = {
- /*
- * U6, CS4350 DAC, address 0x4B
- */
- {
- .type = "cs4350",
- .addr = 0x4B,
- },
-
- /*
- * U20, S35390A RTC, address 0x30
- */
- {
- .type = "s35390a",
- .addr = 0x30,
- },
-
- /*
- * U9, TSC2007 Touch screen controller, address 0x49, irq RA6
- */
- {
- .type = "tsc2007",
- .addr = 0x49,
- .irq = 46,
- .platform_data = &ip7500iap_tsc2007_data,
- },
-};
-
-/*
- * I2C bus on the board, SDA PE4, SCL PE5
- */
-static struct i2c_gpio_platform_data ip7500iap_i2c_data = {
- .sda_pin = GPIO_RF_14,
- .scl_pin = GPIO_RF_13,
- .sda_is_open_drain = 0,
- .scl_is_open_drain = 0,
- .udelay = 50,
-};
-
-static struct platform_device ip7500iap_i2c_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &ip7500iap_i2c_data,
- },
-};
-
-/******************************************************************************
- * Backlight on the board PD0, hardware PWM
- */
-static struct ubicom32bl_platform_data ip7500iap_backlight_data = {
- .type = UBICOM32BL_TYPE_PWM,
- .pwm_channel = 2,
- .pwm_prescale = 15,
- .pwm_period = 60,
- .default_intensity = 0x80,
-};
-
-static struct platform_device ip7500iap_backlight_device = {
- .name = "ubicom32bl",
- .id = -1,
- .dev = {
- .platform_data = &ip7500iap_backlight_data,
- },
-};
-
-/******************************************************************************
- * Devices on this board
- */
-static struct platform_device *ip7500iap_devices[] __initdata = {
- &ip7500iap_i2c_device,
- &ip7500iap_backlight_device,
-};
-
-/*
- * ip7500iap_power_off
- * Called to turn the power off for this board
- */
-static void ip7500iap_power_off(void)
-{
- gpio_set_value(GPIO_RF_11, 0);
-}
-
-/*
- * ip7500iap_init
- * Called to add the devices which we have on this board
- */
-static int __init ip7500iap_init(void)
-{
- struct platform_device *audio_dev;
- struct platform_device *audio_dev2;
- int ret;
-
- board_init();
-
- ubi_gpio_init();
-
- /*
- * Hold the POWER_HOLD line
- */
- ret = gpio_request(GPIO_RF_11, "POWER_HOLD");
- if (ret) {
- printk(KERN_ERR "%s: could not request POWER_HOLD GPIO\n", __FUNCTION__);
- }
- gpio_direction_output(GPIO_RF_11, 1);
- mach_power_off = ip7500iap_power_off;
-
- /*
- * DAC nRESET line
- */
- ret = gpio_request(GPIO_RE_7, "DAC_nRESET");
- if (ret) {
- printk(KERN_ERR "%s: could not request DAC_nRESET GPIO\n", __FUNCTION__);
- }
- gpio_direction_output(GPIO_RE_7, 0);
- udelay(1);
- gpio_set_value(GPIO_RE_7, 1);
-
- /*
- * Bring up any SDIO slots
- */
- ip7500iap_portb_sd_init();
- ip7500iap_portf_sd_init();
-
- /*
- * Bring up audio devices
- */
- platform_add_devices(ip7500iap_devices, ARRAY_SIZE(ip7500iap_devices));
-
- audio_dev = audio_device_alloc("snd-ubi32-cs4350", "audio", "audio-i2sout", 0);
- if (audio_dev) {
- ip7500iap_i2c_board_info[0].platform_data = audio_dev;
- }
-
- audio_dev2 = audio_device_alloc("snd-ubi32-generic", "audio", "audio-spdifout", 0);
- if (audio_dev2) {
- platform_device_register(audio_dev2);
- }
-
- printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
- i2c_register_board_info(0, ip7500iap_i2c_board_info, ARRAY_SIZE(ip7500iap_i2c_board_info));
-
- printk(KERN_INFO "IP7500 Internet Audio Player\n");
-
- return 0;
-}
-
-arch_initcall(ip7500iap_init);
+++ /dev/null
-/*
- * arch/ubicom32/mach-ip7k/board-ip7500media.c
- * Board file for IP7500 media board.
- *
- * Supports the following configuration
- * CPU Module:
- * P/N 8007-0510 rev 1.0 NOPHY
- * P/N 8007-0511 rev 1.1 NOPHY
- * DIP Switch SW2 configuration:
- * POS 1: on = PCI enabled
- * POS 2: off = TTYX => PF12
- * POS 3: off = TTYY => PF15
- * POS 4: unused
- * Media Board:
- * P/N 8007-0610 rev 1.0
- *
- * LCD Adapter Board: (optional)
- * P/N 8007-0920 rev 2.0
- * P/N 8007-0921 rev 2.1
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <linux/input.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/i2c/pca953x.h>
-
-#include <asm/board.h>
-#include <asm/machdep.h>
-#include <asm/ubicom32input_i2c.h>
-#include <asm/ubicom32bl.h>
-#include <asm/ubicom32lcdpower.h>
-#include <asm/vdc_tio.h>
-
-#include <asm/ubicom32sd.h>
-#include <asm/sd_tio.h>
-#include <asm/devtree.h>
-#include <asm/audio.h>
-
-#include <asm/ring_tio.h>
-
-/******************************************************************************
- * SD/IO Port F (Slot 1) platform data
- */
-static struct resource ip7500media_portf_sd_resources[] = {
- /*
- * Send IRQ
- */
- [0] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_IRQ,
- },
-
- /*
- * Receive IRQ
- */
- [1] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_IRQ,
- },
-
- /*
- * Memory Mapped Registers
- */
- [2] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct ubicom32sd_card ip7500media_portf_sd_cards[] = {
- [0] = {
- .pin_wp = IP7500MEDIA_IO16,
- .wp_polarity = 1,
- .pin_pwr = IP7500MEDIA_IO20,
- .pin_cd = IP7500MEDIA_IO23,
- },
- [1] = {
- .pin_wp = IP7500MEDIA_IO17,
- .wp_polarity = 1,
- .pin_pwr = IP7500MEDIA_IO21,
- .pin_cd = IP7500MEDIA_IO24,
- },
-};
-
-static struct ubicom32sd_platform_data ip7500media_portf_sd_platform_data = {
- .ncards = 2,
- .cards = ip7500media_portf_sd_cards,
-};
-
-static struct platform_device ip7500media_portf_sd_device = {
- .name = "ubicom32sd",
- .id = 0,
- .resource = ip7500media_portf_sd_resources,
- .num_resources = ARRAY_SIZE(ip7500media_portf_sd_resources),
- .dev = {
- .platform_data = &ip7500media_portf_sd_platform_data,
- },
-
-};
-
-/*
- * ip7500media_portf_sd_init
- */
-static void ip7500media_portf_sd_init(void)
-{
- /*
- * Check the device tree for the sd_tio
- */
- struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portf_sd");
- if (!sd_node) {
- printk(KERN_INFO "PortF SDTIO not found\n");
- return;
- }
-
- /*
- * Fill in the resources and platform data from devtree information
- */
- ip7500media_portf_sd_resources[0].start = sd_node->dn.sendirq;
- ip7500media_portf_sd_resources[1].start = sd_node->dn.recvirq;
- ip7500media_portf_sd_resources[2].start = (u32_t)&(sd_node->regs);
- ip7500media_portf_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs);
-
- platform_device_register(&ip7500media_portf_sd_device);
-}
-
-/******************************************************************************
- * SD/IO Port B (Slot 2) platform data
- */
-static struct resource ip7500media_portb_sd_resources[] = {
- /*
- * Send IRQ
- */
- [0] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_IRQ,
- },
-
- /*
- * Receive IRQ
- */
- [1] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_IRQ,
- },
-
- /*
- * Memory Mapped Registers
- */
- [2] = {
- /*
- * The init routine will query the devtree and fill this in
- */
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct ubicom32sd_card ip7500media_portb_sd_cards[] = {
- [0] = {
- .pin_wp = IP7500MEDIA_IO19,
- .wp_polarity = 1,
- .pin_pwr = IP7500MEDIA_IO22,
- .pin_cd = IP7500MEDIA_IO18,
- },
-};
-
-static struct ubicom32sd_platform_data ip7500media_portb_sd_platform_data = {
- .ncards = 1,
- .cards = ip7500media_portb_sd_cards,
-};
-
-static struct platform_device ip7500media_portb_sd_device = {
- .name = "ubicom32sd",
- .id = 1,
- .resource = ip7500media_portb_sd_resources,
- .num_resources = ARRAY_SIZE(ip7500media_portb_sd_resources),
- .dev = {
- .platform_data = &ip7500media_portb_sd_platform_data,
- },
-
-};
-
-/*
- * ip7500media_portb_sd_init
- */
-static void ip7500media_portb_sd_init(void)
-{
- /*
- * Check the device tree for the sd_tio
- */
- struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portb_sd");
- if (!sd_node) {
- printk(KERN_INFO "PortB SDTIO not found\n");
- return;
- }
-
- /*
- * Fill in the resources and platform data from devtree information
- */
- ip7500media_portb_sd_resources[0].start = sd_node->dn.sendirq;
- ip7500media_portb_sd_resources[1].start = sd_node->dn.recvirq;
- ip7500media_portb_sd_resources[2].start = (u32_t)&(sd_node->regs);
- ip7500media_portb_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs);
-
- platform_device_register(&ip7500media_portb_sd_device);
-}
-
-/*
- * ip7500media_u17_setup
- * Called by I2C to tell us that u17 is setup.
- *
- * This function is called by I2C to tell us that u17 has been setup. All
- * devices which rely on this chip being initialized (or even present) need to
- * be initialized in this function otherwise they may get initialized too early.
- *
- * Currently the only device depending on u17 is the SDIO
- */
-static int __init ip7500media_u17_setup(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *context)
-{
- /*
- * Initialize the Port F/Port B SD slots (only the enabled ports will init)
- */
- ip7500media_portf_sd_init();
- ip7500media_portb_sd_init();
-
- return 0;
-}
-
-/******************************************************************************
- * LCD VGH on the board at PE6
- */
-static struct ubicom32lcdpower_platform_data ip7500media_lcdpower_data = {
- .vgh_gpio = GPIO_RE_7,
- .vgh_polarity = true,
-};
-
-static struct platform_device ip7500media_lcdpower_device = {
- .name = "ubicom32lcdpower",
- .id = -1,
- .dev = {
- .platform_data = &ip7500media_lcdpower_data,
- },
-};
-
-/******************************************************************************
- * Backlight on the board PD0, hardware PWM
- */
-static struct ubicom32bl_platform_data ip7500media_backlight_data = {
- .type = UBICOM32BL_TYPE_PWM,
- .pwm_channel = 2,
- .pwm_prescale = 15,
- .pwm_period = 60,
- .default_intensity = 0x80,
-};
-
-static struct platform_device ip7500media_backlight_device = {
- .name = "ubicom32bl",
- .id = -1,
- .dev = {
- .platform_data = &ip7500media_backlight_data,
- },
-};
-
-/******************************************************************************
- * Ubicom32Input on I2C, U15 MAX7310, address 0x18, 8 bits
- */
-static struct ubicom32input_i2c_button ip7500media_ubicom32input_i2c_u15_buttons[] = {
- {
- .type = EV_KEY,
- .code = KEY_LEFT,
- .bit = 0,
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_RIGHT,
- .bit = 1,
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_UP,
- .bit = 2,
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_DOWN,
- .bit = 3,
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_ENTER,
- .bit = 4,
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_MENU,
- .bit = 5,
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_ESC,
- .bit = 6,
- .active_low = 1,
- },
-};
-
-static struct ubicom32input_i2c_platform_data ip7500media_ubicom32input_i2c_u15_platform_data = {
- .buttons = ip7500media_ubicom32input_i2c_u15_buttons,
- .nbuttons = ARRAY_SIZE(ip7500media_ubicom32input_i2c_u15_buttons),
- .name = "Ubicom32 Input I2C U15",
-};
-
-/******************************************************************************
- * Additional GPIO chips
- */
-static struct pca953x_platform_data ip7500media_gpio_u16_platform_data = {
- .gpio_base = IP7500MEDIA_U16_BASE,
-};
-
-static struct pca953x_platform_data ip7500media_gpio_u17_platform_data = {
- .gpio_base = IP7500MEDIA_U17_BASE,
- .setup = ip7500media_u17_setup,
-};
-
-static struct pca953x_platform_data ip7500media_gpio_u18_platform_data = {
- .gpio_base = IP7500MEDIA_U18_BASE,
-};
-
-
-/******************************************************************************
- * Touch controller present on LCD Adapter board
- *
- * Connected via I2C bus, interrupt on PD1
- */
-#include <linux/i2c/tsc2007.h>
-
-/*
- * ip7500media_tsc2007_exit_platform_hw
- */
-static void ip7500media_tsc2007_exit_platform_hw(void)
-{
- UBICOM32_IO_PORT(RD)->int_mask &= ~(1 << 11);
- UBICOM32_IO_PORT(RD)->ctl2 &= ~(0x03 << 16);
- gpio_free(GPIO_RD_1);
-}
-
-/*
- * ip7500media_tsc2007_init_platform_hw
- */
-static int ip7500media_tsc2007_init_platform_hw(void)
-{
- int res = gpio_request(GPIO_RD_1, "TSC2007_IRQ");
- if (res) {
- return res;
- }
- UBICOM32_IO_PORT(RD)->function = 0;
- UBICOM32_IO_PORT(RD)->int_mask = (1 << 11);
- UBICOM32_IO_PORT(RD)->ctl2 &= ~(0x03 << 16);
- UBICOM32_IO_PORT(RD)->ctl2 |= (0x02 << 16);
-
- return 0;
-}
-
-/*
- * ip7500media_tsc2007_clear_penirq
- */
-static void ip7500media_tsc2007_clear_penirq(void)
-{
- UBICOM32_IO_PORT(RD)->int_clr = (1 << 11);
-}
-
-/*
- * ip7500media_tsc2007_get_pendown_state
- */
-static int ip7500media_tsc2007_get_pendown_state(void)
-{
- return !gpio_get_value(GPIO_RD_1);
-}
-
-static struct tsc2007_platform_data ip7500media_tsc2007_data = {
- .model = 2007,
- .x_plate_ohms = 350,
- .get_pendown_state = ip7500media_tsc2007_get_pendown_state,
- .init_platform_hw = ip7500media_tsc2007_init_platform_hw,
- .exit_platform_hw = ip7500media_tsc2007_exit_platform_hw,
- .clear_penirq = ip7500media_tsc2007_clear_penirq,
-};
-
-/******************************************************************************
- * Devices on the I2C bus
- *
- * BEWARE of changing the order of things in this array as we depend on
- * certain things to be in certain places.
- */
-static struct i2c_board_info __initdata ip7500media_i2c_board_info[] = {
- /*
- * U6, CS4350 DAC, address 0x4B
- */
- {
- .type = "cs4350",
- .addr = 0x4B,
- },
-
- /*
- * U14, S35390A RTC, address 0x30
- */
- {
- .type = "s35390a",
- .addr = 0x30,
- },
-
- /*
- * U15, MAX7310 IO expander, 8 bits, address 0x18
- * IO0: User I/O (J16-1) (Left) IO4: User I/O (J16-5) (Enter)
- * IO1: User I/O (J16-2) (Right) IO5: User I/O (J16-6) (Menu)
- * IO2: User I/O (J16-3) (Up) IO6: User I/O (J16-7) (Back)
- * IO3: User I/O (J16-4) (Down) IO7: User I/O (J16-8)
- */
- {
- .type = "ubicom32in_max7310",
- .addr = 0x18,
- .platform_data = &ip7500media_ubicom32input_i2c_u15_platform_data,
- },
-
- /*
- * U16, MAX7310 IO expander, 8 bits, address 0x1C
- * IO8 : User I/O (J16-9) IO12: User I/O (J16-17)
- * IO9 : User I/O (J16-10) IO13: User I/O (J16-18)
- * IO10: User I/O (J16-15) IO14: User I/O (J16-19)
- * IO11: User I/O (J16-16) IO15: User I/O (J16-20)
- */
- {
- .type = "max7310",
- .addr = 0x1C,
- .platform_data = &ip7500media_gpio_u16_platform_data,
- },
-
- /*
- * U17, MAX7310 IO expander, 8 bits, address 0x1A
- * IO16: SDIO1A_WP IO20: SD1A_PWREN
- * IO17: SDIO1B_WP IO21: SD1B_PWREN
- * IO18: SDIO2_CD IO22: SD2_PWREN
- * IO19: SDIO2_WP IO23: SDIO1A_CD
- *
- */
- {
- .type = "max7310",
- .addr = 0x1A,
- .platform_data = &ip7500media_gpio_u17_platform_data,
- },
-
- /*
- * U18, MAX7310 IOB expander, 8 bits, address 0x1E
- * IO24: SDIO1B_CD IO28: User I/O TP6
- * IO25: User I/O TP9 IO29: User I/O TP5
- * IO26: User I/O TP8 IO30: User I/O TP4
- * IO27: User I/O TP7 IO31: User I/O TP3
- */
- {
- .type = "max7310",
- .addr = 0x1E,
- .platform_data = &ip7500media_gpio_u18_platform_data,
- },
-};
-
-/*
- * Additional I2C devices to add when a LCD adapter board is present
- */
-static struct i2c_board_info __initdata ip7500media_lcd_adapter_i2c_board_info[] = {
- {
- I2C_BOARD_INFO("tsc2007", 0x48),
- .irq = PORT_OTHER_INT(RD),
- .platform_data = &ip7500media_tsc2007_data,
- },
-};
-
-/*
- * I2C bus on the board, SDA PE4, SCL PE5
- */
-static struct i2c_gpio_platform_data ip7500media_i2c_data = {
- .sda_pin = GPIO_RE_4,
- .scl_pin = GPIO_RE_5,
- .sda_is_open_drain = 0,
- .scl_is_open_drain = 0,
- .udelay = 50,
-};
-
-static struct platform_device ip7500media_i2c_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &ip7500media_i2c_data,
- },
-};
-
-/*
- * Virtual Frame Buffer device for use with LCD Adapter
- */
-static struct platform_device ip7500media_vfb_device = {
- .name = "ubicom32vfb",
- .id = -1,
-};
-
-/*
- * vdc_override:
- * 0: no override (auto-detect)
- * 1: force vdc usage
- * 2: force lcd adapter usage
- */
-static int __initdata vdc_override = 0;
-
-/*
- * ip7500media_set_forcevdc
- * Called when forcevdc is present on the kernel boot line
- */
-static int __init ip7500media_set_forcevdc(char *str)
-{
- if (str[0] == '1') {
- vdc_override = 1;
- } else {
- vdc_override = 2;
- }
- return 1;
-}
-
-/*
- * ip7500media_video_init
- * Called late to determine what kind of video we have on this board
- */
-static int __init ip7500media_video_init(void)
-{
- struct i2c_adapter *adap;
- struct i2c_msg msg[1];
- unsigned char *data;
- unsigned char checksum;
- int err;
- int i;
-
- if (vdc_override == 1) {
- printk(KERN_INFO "Force VDCTIO mode\n");
- goto no_adapter;
- }
- if (vdc_override == 2) {
- printk(KERN_INFO "Force LCD Adapter Board mode\n");
- return 0;
- }
-
- /*
- * Check to see if there is an EEPROM out there. If we see an
- * EEPROM then we will assume a LCD Adapter Board (8007-092x)
- * exists.
- */
- data = kmalloc(256, GFP_KERNEL);
- if (!data) {
- printk(KERN_WARNING "%s: Failed to allocate memory\n", __FUNCTION__);
- return -ENOMEM;
- }
-
- adap = i2c_get_adapter(0);
- if (!adap) {
- printk(KERN_WARNING "%s: Failed to get i2c adapter\n", __FUNCTION__);
- kfree(data);
- return -ENODEV;
- }
- data[0] = 0;
- msg->addr = 0x50;
- msg->flags = 0;
- msg->len = 1;
- msg->buf = data;
- err = i2c_transfer(adap, msg, 1);
- if (err < 0) {
- goto no_adapter;
- }
-
- msg->addr = 0x50;
- msg->flags = I2C_M_RD;
- msg->len = 256;
- msg->buf = data;
- err = i2c_transfer(adap, msg, 1);
- if (err < 0) {
- goto no_adapter;
- }
-
- i2c_put_adapter(adap);
-
- /*
- * Verify the checksum
- */
- checksum = 0xff;
- for (i = 0; i < 255; i++) {
- checksum ^= data[i];
- }
- if (checksum != data[255]) {
- printk(KERN_WARNING "%s: Checksum mismatch\n", __FUNCTION__);
- }
-
- kfree(data);
-
- /*
- * Bring up VFB
- */
- platform_device_register(&ip7500media_vfb_device);
-
- /*
- * Add the i2c devices on the LCD Adapter board. (We have to use i2c_new_device
- * since it's late in the boot process.)
- */
- printk(KERN_INFO "%s: registering LCD Adapter board i2c resources\n", __FUNCTION__);
- for (i = 0; i < ARRAY_SIZE(ip7500media_lcd_adapter_i2c_board_info); i++) {
- i2c_new_device(adap, &ip7500media_lcd_adapter_i2c_board_info[i]);
- }
-
- i2c_put_adapter(adap);
-
- return 0;
-
- /*
- * No LCD Adapter board, bring up VDC
- */
-no_adapter:
- vdc_tio_init();
- return 0;
-}
-late_initcall(ip7500media_video_init);
-__setup("forcevdc=", ip7500media_set_forcevdc);
-
-/*
- * ip7500media_init
- * Called to add the devices which we have on this board
- */
-static int __init ip7500media_init(void)
-{
- struct platform_device *audio_dev;
- int have_ethernet = (devtree_find_node("eth_lan") != 0);
-
- board_init();
-
- ubi_gpio_init();
-
-#ifdef CONFIG_UIO_UBICOM32RING
- ring_tio_init("decoder_ring");
-#endif
-
- /*
- * Register all of the devices we have on this board
- */
- printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
- platform_device_register(&ip7500media_i2c_device);
- platform_device_register(&ip7500media_backlight_device);
-
- /*
- * If ethernet doesn't exist then we can init the lcdpower
- */
- if (!have_ethernet) {
- platform_device_register(&ip7500media_lcdpower_device);
- }
-
- /*
- * Allocate the audio drivers. SPDIF not supported on boards with ethernet.
- */
- audio_dev = audio_device_alloc("snd-ubi32-cs4350", "audio", "audio-i2sout", 0);
- if (audio_dev) {
- ip7500media_i2c_board_info[0].platform_data = audio_dev;
- }
-
- if (!have_ethernet) {
- struct platform_device *audio_dev2;
-
- audio_dev2 = audio_device_alloc("snd-ubi32-generic", "audio", "audio-spdifout", 0);
- if (audio_dev2) {
- platform_device_register(audio_dev2);
- }
- }
-
- /*
- * Register all of the devices which sit on the I2C bus
- */
- printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
- i2c_register_board_info(0, ip7500media_i2c_board_info, ARRAY_SIZE(ip7500media_i2c_board_info));
-
- /*
- * We have to initialize the SDIO after the I2C IOB gets setup. SDIO is initialized in
- * ip7500media_u17_setup
- */
-
- printk("IP7500 Media Board\n");
-
- return 0;
-}
-
-arch_initcall(ip7500media_init);
+++ /dev/null
-/*
- * arch/ubicom32/mach-ip7k/board-ip7500module.c
- * Support for IP7500 CPU module board.
- *
- * This file supports the IP7500 CPU module board:
- * 8007-0510 Rev 1.0
- * 8007-0510A Rev 1.0 (with ethernet)
- *
- * DIP Switch SW2 configuration: (*) default
- * POS 1: on(*) = PCI enabled, off = PCI disabled
- * POS 2: on(*) = TTYX => PA6, off = TTYX => PF12
- * POS 3: on(*) = TTYY => PA7, off = TTYY => PF15
- * POS 4: unused
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <asm/board.h>
-
-/*
- * ip7500module_init
- * Called to add the devices which we have on this board
- */
-static int __init ip7500module_init(void)
-{
- board_init();
-
- ubi_gpio_init();
-
- return 0;
-}
-
-arch_initcall(ip7500module_init);
+++ /dev/null
-/*
- * arch/ubicom32/mach-ip7k/board-ip7500wspkr.c
- * Support for IP7500 Wireless Speaker board.
- *
- * This file supports the IP7500 Wireless Speaker board:
- * 8007-1210 Rev 1.0
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <asm/board.h>
-
-#include <linux/platform_device.h>
-#include <asm/audio.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-
-static struct i2c_board_info __initdata ip7500wspkr_i2c_board_info[] = {
- /*
- * U6, CS4350 DAC, address 0x4B
- */
- {
- .type = "cs4350",
- .addr = 0x4B,
- },
-};
-
-/*
- * I2C bus on the board, SDA PE4, SCL PE5
- */
-static struct i2c_gpio_platform_data ip7500wspkr_i2c_data = {
- .sda_pin = GPIO_RD_5,
- .scl_pin = GPIO_RD_6,
- .sda_is_open_drain = 0,
- .scl_is_open_drain = 0,
- .udelay = 50,
-};
-
-static struct platform_device ip7500wspkr_i2c_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &ip7500wspkr_i2c_data,
- },
-};
-
-static struct platform_device *ip7500wspkr_devices[] __initdata = {
- &ip7500wspkr_i2c_device,
-};
-
-/*
- * ip7500wspkr_init
- * Called to add the devices which we have on this board
- */
-static int __init ip7500wspkr_init(void)
-{
- struct platform_device *audio_dev;
- struct platform_device *audio_dev2;
-
- board_init();
-
- ubi_gpio_init();
-
- platform_add_devices(ip7500wspkr_devices, ARRAY_SIZE(ip7500wspkr_devices));
-
- audio_dev = audio_device_alloc("snd-ubi32-cs4350", "audio", "audio-i2sout", 0);
- if (audio_dev) {
- ip7500wspkr_i2c_board_info[0].platform_data = audio_dev;
- }
-
- audio_dev2 = audio_device_alloc("snd-ubi32-generic", "audio", "audio-spdifout", 0);
- if (audio_dev2) {
- platform_device_register(audio_dev2);
- }
-
- printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
- i2c_register_board_info(0, ip7500wspkr_i2c_board_info, ARRAY_SIZE(ip7500wspkr_i2c_board_info));
-
- printk(KERN_INFO "IP7500 Wireless Speaker Board\n");
-
- return 0;
-}
-
-arch_initcall(ip7500wspkr_init);
+++ /dev/null
-#
-# arch/ubicom32/mm/Makefile
-# <TODO: Replace with short file description>
-#
-# (C) Copyright 2009, Ubicom, Inc.
-#
-# This file is part of the Ubicom32 Linux Kernel Port.
-#
-# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-# it and/or modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation, either version 2 of the
-# License, or (at your option) any later version.
-#
-# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with the Ubicom32 Linux Kernel Port. If not,
-# see <http://www.gnu.org/licenses/>.
-#
-# Ubicom32 implementation derived from (with many thanks):
-# arch/m68knommu
-# arch/blackfin
-# arch/parisc
-#
-#
-# Makefile for the linux m68knommu specific parts of the memory manager.
-#
-
-obj-y += init.o fault.o memory.o kmap.o ocm-alloc.o
+++ /dev/null
-/*
- * arch/ubicom32/mm/fault.c
- * Ubicom32 architecture page fault implementation.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
- * Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
- *
- * Based on:
- *
- * linux/arch/m68k/mm/fault.c
- *
- * Copyright (C) 1995 Hamish Macdonald
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/module.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-
-extern void die_if_kernel(char *, struct pt_regs *, long);
-
-/*
- * This routine handles page faults. It determines the problem, and
- * then passes it off to one of the appropriate routines.
- *
- * error_code:
- * bit 0 == 0 means no page found, 1 means protection fault
- * bit 1 == 0 means read, 1 means write
- *
- * If this routine detects a bad access, it returns 1, otherwise it
- * returns 0.
- */
-asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
- unsigned long error_code)
-{
-#ifdef DEBUG
- printk (KERN_DEBUG "regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n",
- regs->sr, regs->pc, address, error_code);
-#endif
-
- /*
- * Oops. The kernel tried to access some bad page. We'll have to
- * terminate things with extreme prejudice.
- */
- if ((unsigned long) address < PAGE_SIZE) {
- printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
- } else
- printk(KERN_ALERT "Unable to handle kernel access");
- printk(KERN_ALERT " at virtual address %08lx\n",address);
- die_if_kernel("Oops", regs, error_code);
- do_exit(SIGKILL);
-
- return 1;
-}
+++ /dev/null
-/*
- * arch/ubicom32/mm/init.c
- * Ubicom32 architecture virtual memory initialization.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
- * Kenneth Albanowski <kjahds@kjahds.com>,
- * Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
- *
- * Based on:
- *
- * linux/arch/m68k/mm/init.c
- *
- * Copyright (C) 1995 Hamish Macdonald
- *
- * JAN/1999 -- hacked to support ColdFire (gerg@snapgear.com)
- * DEC/2000 -- linux 2.4 support <davidm@snapgear.com>
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-#include <linux/pagemap.h>
-#include <linux/bootmem.h>
-#include <linux/slab.h>
-
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/machdep.h>
-#include <asm/ocm-alloc.h>
-#include <asm/processor.h>
-
-#undef DEBUG
-
-extern void die_if_kernel(char *,struct pt_regs *,long);
-extern void free_initmem(void);
-
-/*
- * BAD_PAGE is the page that is used for page faults when linux
- * is out-of-memory. Older versions of linux just did a
- * do_exit(), but using this instead means there is less risk
- * for a process dying in kernel mode, possibly leaving a inode
- * unused etc..
- *
- * BAD_PAGETABLE is the accompanying page-table: it is initialized
- * to point to BAD_PAGE entries.
- *
- * ZERO_PAGE is a special page that is used for zero-initialized
- * data and COW.
- */
-static unsigned long empty_bad_page_table;
-
-static unsigned long empty_bad_page;
-
-unsigned long empty_zero_page;
-
-void show_mem(void)
-{
- unsigned long i;
- int free = 0, total = 0, reserved = 0, shared = 0;
- int cached = 0;
-
- printk(KERN_INFO "\nMem-info:\n");
- show_free_areas();
- i = max_mapnr;
- while (i-- > 0) {
- total++;
- if (PageReserved(mem_map+i))
- reserved++;
- else if (PageSwapCache(mem_map+i))
- cached++;
- else if (!page_count(mem_map+i))
- free++;
- else
- shared += page_count(mem_map+i) - 1;
- }
- printk(KERN_INFO "%d pages of RAM\n",total);
- printk(KERN_INFO "%d free pages\n",free);
- printk(KERN_INFO "%d reserved pages\n",reserved);
- printk(KERN_INFO "%d pages shared\n",shared);
- printk(KERN_INFO "%d pages swap cached\n",cached);
-}
-
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-extern char __ocm_free_begin;
-extern char __ocm_free_end;
-
-/*
- * paging_init() continues the virtual memory environment setup which
- * was begun by the code in arch/head.S.
- * The parameters are pointers to where to stick the starting and ending
- * addresses of available kernel virtual memory.
- */
-void __init paging_init(void)
-{
- /*
- * Make sure start_mem is page aligned, otherwise bootmem and
- * page_alloc get different views of the world.
- */
-#ifdef DEBUG
- unsigned long start_mem = PAGE_ALIGN(memory_start);
-#endif
- unsigned long end_mem = memory_end & PAGE_MASK;
-
-#ifdef DEBUG
- printk (KERN_DEBUG "start_mem is %#lx\nvirtual_end is %#lx\n",
- start_mem, end_mem);
-#endif
-
- /*
- * Initialize the bad page table and bad page to point
- * to a couple of allocated pages.
- */
- empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
- empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
- empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
- memset((void *)empty_zero_page, 0, PAGE_SIZE);
-
- /*
- * TODO: enable setting up for user memory management interface.
- */
-
-#ifdef DEBUG
- printk (KERN_DEBUG "before free_area_init\n");
-
- printk (KERN_DEBUG "free_area_init -> start_mem is %#lx\nvirtual_end is %#lx\n",
- start_mem, end_mem);
-#endif
-
- {
- unsigned long zones_size[MAX_NR_ZONES] = {0, };
-#ifdef CONFIG_ZONE_DMA
- zones_size[ZONE_DMA] = OCMSIZE >> PAGE_SHIFT;
-#endif
- zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
-#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = 0;
-#endif
- free_area_init(zones_size);
- }
-}
-
-void __init mem_init(void)
-{
- int codek = 0, datak = 0, initk = 0;
- unsigned long tmp, ram_start, ram_end, len;
- extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end;
-
- unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
- unsigned long end_mem = memory_end; /* DAVIDM - this must not include kernel stack at top */
- processor_dram(&ram_start, &ram_end);
- len = (ram_end - ram_start) + OCMSIZE;
-#ifdef DEBUG
- printk(KERN_DEBUG "Mem_init: start=%lx, end=%lx\n", start_mem, end_mem);
-#endif
-
- end_mem &= PAGE_MASK;
- high_memory = (void *) end_mem;
-
- start_mem = PAGE_ALIGN(start_mem);
- max_mapnr = num_physpages = (((unsigned long) high_memory) - PAGE_OFFSET) >> PAGE_SHIFT;
-
- /* this will put all memory onto the freelists */
-#ifdef CONFIG_ZONE_DMA
- {
- unsigned long ocm_free_begin = (unsigned long)&__ocm_free_begin;
- unsigned long ocm_free_end = (unsigned long)&__ocm_free_end;
- unsigned long zone_dma_begin = (ocm_free_begin + PAGE_SIZE - 1) & PAGE_MASK;
- unsigned long zone_dma_end = ocm_free_end & PAGE_MASK;
- if (zone_dma_end > zone_dma_begin)
- free_bootmem(zone_dma_begin, zone_dma_end-zone_dma_begin);
- }
-#endif
- totalram_pages = free_all_bootmem();
-
- codek = (&_etext - &_stext) >> 10;
- datak = (&_ebss - &_sdata) >> 10;
- initk = (&__init_begin - &__init_end) >> 10;
-
- tmp = nr_free_pages() << PAGE_SHIFT;
- printk(KERN_INFO "Memory available: %luk/%luk RAM, (%dk kernel code, %dk data)\n",
- tmp >> 10,
- len >> 10,
- codek,
- datak
- );
-
-}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
- int pages = 0;
- for (; start < end; start += PAGE_SIZE) {
- ClearPageReserved(virt_to_page(start));
- init_page_count(virt_to_page(start));
- free_page(start);
- totalram_pages++;
- pages++;
- }
- printk (KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages);
-}
-#endif
-
-void
-free_initmem()
-{
-#ifdef CONFIG_RAMKERNEL
- unsigned long addr;
- extern char __init_begin, __init_end;
- /*
- * The following code should be cool even if these sections
- * are not page aligned.
- */
- addr = PAGE_ALIGN((unsigned long)(&__init_begin));
- /* next to check that the page we free is not a partial page */
- for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) {
- ClearPageReserved(virt_to_page(addr));
- init_page_count(virt_to_page(addr));
- free_page(addr);
- totalram_pages++;
- }
- printk(KERN_NOTICE "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n",
- (addr - PAGE_ALIGN((long) &__init_begin)) >> 10,
- (int)(PAGE_ALIGN((unsigned long)(&__init_begin))),
- (int)(addr - PAGE_SIZE));
-#endif
-}
+++ /dev/null
-/*
- * arch/ubicom32/mm/kmap.c
- * Ubicom32 architecture non-mmu ioremap and friends implementation.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 2000 Lineo, <davidm@snapgear.com>
- * Copyright (C) 2000-2002 David McCullough <davidm@snapgear.com>
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/io.h>
-#include <asm/system.h>
-
-#undef DEBUG
-
-/*
- * Map some physical address range into the kernel address space.
- */
-void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag)
-{
- return (void *)physaddr;
-}
-
-/*
- * Unmap a ioremap()ed region again.
- */
-void iounmap(void *addr)
-{
-}
-
-/*
- * __iounmap unmaps nearly everything, so be careful
- * it doesn't free currently pointer/page tables anymore but it
- * wans't used anyway and might be added later.
- */
-void __iounmap(void *addr, unsigned long size)
-{
-}
-
-/*
- * Set new cache mode for some kernel address space.
- * The caller must push data for that range itself, if such data may already
- * be in the cache.
- */
-void kernel_set_cachemode(void *addr, unsigned long size, int cmode)
-{
-}
+++ /dev/null
-/*
- * arch/ubicom32/mm/memory.c
- * Ubicom32 architecture kernel_map() implementation.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
- * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *
- * Based on:
- *
- * linux/arch/m68k/mm/memory.c
- *
- * Copyright (C) 1995 Hamish Macdonald
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-
-/*
- * Map some physical address range into the kernel address space.
- * The code is copied and adapted from map_chunk().
- */
-
-unsigned long kernel_map(unsigned long paddr, unsigned long size,
- int nocacheflag, unsigned long *memavailp )
-{
- return paddr;
-}
+++ /dev/null
-/*
- * arch/ubicom32/mm/ocm-alloc.c
- * OCM allocator for Uibcom32 On-Chip memory
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Based on:
- *
- * arch/blackfin/mm/sram-alloc.c
- *
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/ioport.h>
-#include <linux/fcntl.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/mutex.h>
-#include <linux/rtc.h>
-#include <asm/ocm-alloc.h>
-
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt, a...)
-#endif
-/*
- * the data structure for OCM heap pieces
- */
-struct ocm_piece {
- void *paddr;
- int size;
- pid_t pid;
- struct ocm_piece *next;
-};
-
-/*
- * struct ocm_heap
- */
-struct ocm_heap {
- struct ocm_piece free_head;
- struct ocm_piece used_head;
- struct mutex lock;
-};
-
-static struct ocm_heap ocm_inst_heap;
-int ubi32_ocm_skbuf_max = 21, ubi32_ocm_skbuf, ubi32_ddr_skbuf;
-
-/*
- * OCM area for storing code
- */
-extern asmlinkage void *__ocm_free_begin;
-extern asmlinkage void *__ocm_free_end;
-extern asmlinkage void *__ocm_inst_heap_begin;
-extern asmlinkage void *__ocm_inst_heap_end;
-#define OCM_INST_HEAP_BEGIN ((unsigned int)&__ocm_inst_heap_begin)
-#define OCM_INST_HEAP_END ((unsigned int)&__ocm_inst_heap_end)
-#define OCM_INST_HEAP_LENGTH (OCM_INST_HEAP_END - OCM_INST_HEAP_BEGIN)
-
-static struct kmem_cache *ocm_piece_cache;
-
-/*
- * _ocm_heap_init()
- */
-static int __init _ocm_heap_init(struct ocm_heap *ocmh,
- unsigned int start,
- unsigned int size)
-{
- ocmh->free_head.next = kmem_cache_alloc(ocm_piece_cache, GFP_KERNEL);
-
- if (!ocmh->free_head.next)
- return -1;
-
- ocmh->free_head.next->paddr = (void *)start;
- ocmh->free_head.next->size = size;
- ocmh->free_head.next->pid = 0;
- ocmh->free_head.next->next = 0;
-
- ocmh->used_head.next = NULL;
-
- /* mutex initialize */
- mutex_init(&ocmh->lock);
-
- return 0;
-}
-
-/*
- * _ocm_alloc_init()
- *
- * starts the ocm heap(s)
- */
-static int __init _ocm_alloc_init(void)
-{
- if (OCM_INST_HEAP_LENGTH) {
- ocm_piece_cache = kmem_cache_create("ocm_piece_cache",
- sizeof(struct ocm_piece),
- 0, SLAB_PANIC, NULL);
-
- if (_ocm_heap_init(&ocm_inst_heap,
- OCM_INST_HEAP_BEGIN,
- OCM_INST_HEAP_LENGTH) == 0)
- printk(KERN_INFO "OCM Instruction Heap %d KB\n",
- OCM_INST_HEAP_LENGTH >> 10);
- else
- printk(KERN_INFO "Failed to initialize OCM "
- "Instruction Heap\n");
-
- } else
- printk(KERN_INFO "No space available for OCM "
- "Instruction Heap\n");
-
- return 0;
-}
-pure_initcall(_ocm_alloc_init);
-
-/*
- * _ocm_alloc()
- * generic alloc a block in the ocm heap, if successful
- * returns the pointer.
- */
-static void *_ocm_alloc(size_t size, pid_t pid, struct ocm_heap *ocmheap)
-{
- struct ocm_piece *pslot, *plast, *pavail;
- struct ocm_piece *pfree_head = &ocmheap->free_head;
- struct ocm_piece *pused_head = &ocmheap->used_head;
-
- if (size <= 0 || !pfree_head || !pused_head)
- return NULL;
-
- /* Align the size */
- size = (size + 3) & ~3;
-
- pslot = pfree_head->next;
- plast = pfree_head;
-
- /*
- * search an available piece slot
- */
- while (pslot != NULL && size > pslot->size) {
- plast = pslot;
- pslot = pslot->next;
- }
-
- if (!pslot)
- return NULL;
-
- if (pslot->size == size) {
- /*
- * Unlink this block from the list
- */
- plast->next = pslot->next;
- pavail = pslot;
- } else {
- /*
- * Split this block in two.
- */
- pavail = kmem_cache_alloc(ocm_piece_cache, GFP_KERNEL);
-
- if (!pavail)
- return NULL;
-
- pavail->paddr = pslot->paddr;
- pavail->size = size;
- pslot->paddr += size;
- pslot->size -= size;
- }
-
- pavail->pid = pid;
-
- pslot = pused_head->next;
- plast = pused_head;
-
- /*
- * insert new piece into used piece list !!!
- */
- while (pslot != NULL && pavail->paddr < pslot->paddr) {
- plast = pslot;
- pslot = pslot->next;
- }
-
- pavail->next = pslot;
- plast->next = pavail;
-
- DEBUGP("_ocm_alloc %d bytes at %p from in %p",
- size, pavail->paddr, ocmheap);
-
- return pavail->paddr;
-}
-
-#if 0
-/* Allocate the largest available block. */
-static void *_ocm_alloc_max(struct ocm_heap *ocmheap,
- unsigned long *psize)
-{
- struct ocm_piece *pfree_head = &ocmheap->free_head;
- struct ocm_piece *pslot, *pmax;
-
- pmax = pslot = pfree_head->next;
-
- /* search an available piece slot */
- while (pslot != NULL) {
- if (pslot->size > pmax->size)
- pmax = pslot;
- pslot = pslot->next;
- }
-
- if (!pmax)
- return NULL;
-
- *psize = pmax->size;
-
- return _ocm_alloc(*psize, ocmheap);
-}
-#endif
-
-/*
- * _ocm_free()
- * generic free a block in the ocm heap, if successful
- */
-static int _ocm_free(const void *addr,
- struct ocm_heap *ocmheap)
-{
- struct ocm_piece *pslot, *plast, *pavail;
- struct ocm_piece *pfree_head = &ocmheap->free_head;
- struct ocm_piece *pused_head = &ocmheap->used_head;
-
- /* search the relevant memory slot */
- pslot = pused_head->next;
- plast = pused_head;
-
- /* search an available piece slot */
- while (pslot != NULL && pslot->paddr != addr) {
- plast = pslot;
- pslot = pslot->next;
- }
-
- if (!pslot) {
- DEBUGP("_ocm_free %p not found in %p", addr, ocmheap);
- return -1;
- }
- DEBUGP("_ocm_free %p from in %p", addr, ocmheap);
-
- plast->next = pslot->next;
- pavail = pslot;
- pavail->pid = 0;
-
- /* insert free pieces back to the free list */
- pslot = pfree_head->next;
- plast = pfree_head;
-
- while (pslot != NULL && addr > pslot->paddr) {
- plast = pslot;
- pslot = pslot->next;
- }
-
- if (plast != pfree_head &&
- plast->paddr + plast->size == pavail->paddr) {
- plast->size += pavail->size;
- kmem_cache_free(ocm_piece_cache, pavail);
- } else {
- pavail->next = plast->next;
- plast->next = pavail;
- plast = pavail;
- }
-
- if (pslot && plast->paddr + plast->size == pslot->paddr) {
- plast->size += pslot->size;
- plast->next = pslot->next;
- kmem_cache_free(ocm_piece_cache, pslot);
- }
-
- return 0;
-}
-
-/*
- * ocm_inst_alloc()
- *
- * allocates a block of size in the ocm instrction heap, if
- * successful returns address allocated.
- */
-void *ocm_inst_alloc(size_t size, pid_t pid)
-{
- void *addr;
-
- if (!OCM_INST_HEAP_LENGTH)
- return NULL;
-
-
- mutex_lock(&ocm_inst_heap.lock);
-
- addr = _ocm_alloc(size, pid, &ocm_inst_heap);
-
- mutex_unlock(&ocm_inst_heap.lock);
-
- return addr;
-}
-EXPORT_SYMBOL(ocm_inst_alloc);
-
-/*
- * ocm_inst_free()
- * free a block in the ocm instrction heap, returns 0 if successful.
- */
-int ocm_inst_free(const void *addr)
-{
- int ret;
-
- if (!OCM_INST_HEAP_LENGTH)
- return -1;
-
- mutex_lock(&ocm_inst_heap.lock);
-
- ret = _ocm_free(addr, &ocm_inst_heap);
-
- mutex_unlock(&ocm_inst_heap.lock);
-
- return ret;
-}
-EXPORT_SYMBOL(ocm_inst_free);
-
-/*
- * ocm_free()
- * free a block in one of the ocm heaps, returns 0 if successful.
- */
-int ocm_free(const void *addr)
-{
- if (addr >= (void *)OCM_INST_HEAP_BEGIN
- && addr < (void *)(OCM_INST_HEAP_END))
- return ocm_inst_free(addr);
- else
- return -1;
-}
-EXPORT_SYMBOL(ocm_free);
-
-
-#ifdef CONFIG_PROC_FS
-/* Need to keep line of output the same. Currently, that is 46 bytes
- * (including newline).
- */
-static int _ocm_proc_read(char *buf, int *len, int count, const char *desc,
- struct ocm_heap *ocmheap)
-{
- struct ocm_piece *pslot;
- struct ocm_piece *pfree_head = &ocmheap->free_head;
- struct ocm_piece *pused_head = &ocmheap->used_head;
-
- /* The format is the following
- * --- OCM 123456789012345 Size PID State \n
- * 12345678-12345678 1234567890 12345 1234567890\n
- */
- int l;
- l = sprintf(&buf[*len], "--- OCM %-15s Size PID State \n",
- desc);
-
- *len += l;
- count -= l;
-
- mutex_lock(&ocm_inst_heap.lock);
-
- /*
- * search the relevant memory slot
- */
- pslot = pused_head->next;
-
- while (pslot != NULL && count > 46) {
- l = sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
- pslot->paddr, pslot->paddr + pslot->size,
- pslot->size, pslot->pid, "ALLOCATED");
-
- *len += l;
- count -= l;
- pslot = pslot->next;
- }
-
- pslot = pfree_head->next;
-
- while (pslot != NULL && count > 46) {
- l = sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
- pslot->paddr, pslot->paddr + pslot->size,
- pslot->size, pslot->pid, "FREE");
-
- *len += l;
- count -= l;
- pslot = pslot->next;
- }
-
- mutex_unlock(&ocm_inst_heap.lock);
-
- return 0;
-}
-
-static int ocm_proc_read(char *buf, char **start, off_t offset, int count,
- int *eof, void *data)
-{
- int len = 0;
-
- len = sprintf(&buf[len], "--- OCM SKB usage (max RX buf %d)\n"
- "(SKB in OCM) %d - (SKB in DDR) %d\n",
- ubi32_ocm_skbuf_max,
- ubi32_ocm_skbuf,
- ubi32_ddr_skbuf);
-
- len += sprintf(&buf[len], "--- OCM Data Heap Size\n"
- "%p-%p %10i\n",
- ((void *)&__ocm_free_begin),
- ((void *)&__ocm_free_end),
- ((unsigned int)&__ocm_free_end) -
- ((unsigned int)&__ocm_free_begin));
-
- if (_ocm_proc_read(buf, &len, count - len, "Inst Heap",
- &ocm_inst_heap))
- goto not_done;
- *eof = 1;
- not_done:
- return len;
-}
-
-static int ocm_proc_write(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- int n, v;
- char in[8];
-
- if (count > sizeof(in))
- return -EINVAL;
-
- if (copy_from_user(in, buffer, count))
- return -EFAULT;
- in[count-1] = 0;
-
- printk(KERN_INFO "OCM skb alloc max = %s\n", in);
-
- n = 0;
- v = 0;
- while ((in[n] >= '0') && (in[n] <= '9')) {
- v = v * 10 + (int)(in[n] - '0');
- n++;
- }
-
- if (v == 0)
- return -EINVAL;
-
- ubi32_ocm_skbuf_max = v;
- ubi32_ocm_skbuf = ubi32_ddr_skbuf = 0;
-
- return count;
-}
-
-static int __init sram_proc_init(void)
-{
- struct proc_dir_entry *ptr;
- ptr = create_proc_entry("ocm", S_IFREG | S_IRUGO, NULL);
- if (!ptr) {
- printk(KERN_WARNING "unable to create /proc/ocm\n");
- return -1;
- }
- ptr->read_proc = ocm_proc_read;
- ptr->write_proc = ocm_proc_write;
- return 0;
-}
-late_initcall(sram_proc_init);
-#endif
+++ /dev/null
-#
-# arch/ubicom32/Makefile
-# Makefile for Oprofile support on Ubicom32
-#
-# (C) Copyright 2009, Ubicom, Inc.
-#
-# This file is part of the Ubicom32 Linux Kernel Port.
-#
-# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-# it and/or modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation, either version 2 of the
-# License, or (at your option) any later version.
-#
-# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with the Ubicom32 Linux Kernel Port. If not,
-# see <http://www.gnu.org/licenses/>.
-#
-# Ubicom32 implementation derived from (with many thanks):
-# arch/m68knommu
-# arch/blackfin
-# arch/parisc
-#
-
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
- oprof.o cpu_buffer.o buffer_sync.o \
- event_buffer.o oprofile_files.o \
- oprofilefs.o oprofile_stats.o \
- timer_int.o )
-
-oprofile-y := $(DRIVER_OBJS) profile.o
+++ /dev/null
-#ifndef __IP_PROF_H__
-#define __IP_PROF_H__
-
-/* This number MUST match what is used in the ultra configuration! */
-#define IPPROFILETIO_MAX_SAMPLES 600
-
-/* Move to .h file used in both; avoid special types */
-struct profile_sample {
- unsigned int pc; /* PC value */
- unsigned int parent; /* a5 contents, to find the caller */
- unsigned char cond_codes; /* for branch prediction */
- unsigned char thread; /* I-blocked, D-blocked,
- 4-bit thread number */
- unsigned short active; /* which threads are active -
- for accurate counting */
- unsigned short blocked; /* which threads are blocked due to
- I or D cache misses */
- unsigned int latency; /* CPU clocks since the last message
- dispatch in this thread
- (thread 0 only for now) */
-};
-
-
-struct profilenode {
- struct devtree_node dn;
- volatile unsigned char enabled; /* Is the tio enabled to
- take samples? */
- volatile unsigned char busy; /* set when the samples
- are being read */
- volatile unsigned int mask; /* Threads that change the MT_EN flag */
- volatile unsigned short rate; /* What is the sampling rate? */
- volatile unsigned short head; /* sample taker puts samples here */
- volatile unsigned short tail; /* packet filler takes samples here */
- volatile unsigned short count; /* number of valid samples */
- volatile unsigned short total; /* Total samples */
- struct profile_sample samples[IPPROFILETIO_MAX_SAMPLES];
-};
-
-#endif
+++ /dev/null
-/*
- * arch/ubicom32/oprofile/profile.c
- * Oprofile support for arch Ubicom32
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option)
- * any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it will
- * be useful, but WITHOUT ANY WARRANTY; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not, see
- * <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-/**
- * @file profile.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Hunyue Yau <hy@hy-research.com>
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-#include <asm/devtree.h>
-#include <asm/thread.h>
-
-/* For identifying userland vs kernel address */
-#include <asm/stacktrace.h>
-#include "ipProf.h"
-
-/* For communications with the backend */
-static struct profilenode *profile_node;
-
-/* Bitmask containing all Linux threads - as seen by the ROSR reg */
-static unsigned long th_all_mask;
-
-/* Lookup table to translate a hardware thread into a CPU identifier
- * Table is indexed by the ROSR value which is assumed to be
- * relatively small (0...15).
- */
-unsigned int cpu_map[THREAD_ARCHITECTURAL_MAX];
-
-static struct pt_regs regs;
-
-/*
- * For each sample returned, checked to see if they are relevant to
- * us. This is necessary as the ubicom32 architecture has other software
- * running outside of Linux. Only then, put the sample into the relevant
- * cpu bins.
- *
- * To minimize overhead, a global mask with all possible threads of in
- * interest to us is used as a first check. Then a second mask identifying
- * the thread is used to obtain an identifier for that "CPU".
- */
-
-/*
- * ubicom32_build_cpu_th_mask()
- *
- * Build a lookup table for translation between hardware thread
- * "ROSR" values and Linux CPU ids
- *
- * *** This gets executed on all CPUs at once! ***
- */
-static void ubicom32_build_cpu_th_mask(void *mask)
-{
- thread_t self = thread_get_self();
- unsigned long *th_m = mask;
-
- BUG_ON(self <= 0 || self >= THREAD_ARCHITECTURAL_MAX);
- cpu_map[self] = smp_processor_id();
-
- set_bit(self, th_m);
-}
-
-/*
- * profile_interrupt()
- *
- * Process samples returned from the profiler backend. The backend
- * may return samples that are irrelevant to us or may even return
- * multiple samples for the same CPU. Note that the sames may be
- * for ANY cpu. At this time, this is unique and to support this requires
- * Oprofile to expose an interface to accept the CPU that the same came
- * frome.
- */
-static irqreturn_t profile_interrupt(int irq, void *arg)
-{
- int i, buf_entry;
- int is_kernel;
- unsigned int bit_th;
- unsigned int th;
-
- if (!(profile_node->enabled) || profile_node->count < 0) {
- printk(KERN_WARNING
- "Unexpected interrupt, no samples or not enabled!\n");
- return IRQ_HANDLED;
- }
-
- profile_node->busy = 1; /* Keep backend out */
-
- for (i = 0; i < profile_node->count; i++) {
- buf_entry = profile_node->tail;
- profile_node->tail++;
- profile_node->tail %= IPPROFILETIO_MAX_SAMPLES;
-
- /* Note - the "thread" ID is only the lower 4 bits */
- th = (0x0f & profile_node->samples[buf_entry].thread);
- bit_th = (1 << th);
-
- if ((bit_th & th_all_mask) == 0)
- continue;
-
- regs.pc = profile_node->samples[buf_entry].pc;
-
- is_kernel = ubicom32_is_kernel(regs.pc);
-
- oprofile_add_ext_sample_cpu(regs.pc, ®s, 0, is_kernel,
- cpu_map[th]);
- }
- profile_node->count = 0;
- profile_node->busy = 0;
-
- return IRQ_HANDLED;
-}
-
-/*
- * profile_start()
- *
- * Notification from oprofile to start the profiler
- */
-static int profile_start(void)
-{
- if (!profile_node)
- return -1;
-
- profile_node->enabled = 1;
-
- return 0;
-}
-
-/*
- * profile_stop()
- *
- * Notification from oprofile to stop the profiler
- */
-static void profile_stop(void)
-{
- if (profile_node)
- profile_node->enabled = 0;
-}
-
-/*
- * oprofile_arch_init()
- *
- * Attach to Oprofile after qualify the availability of the backend
- * profiler support.
- */
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
- int r = -ENODEV;
-
- profile_node = (struct profilenode *)devtree_find_node("profiler");
-
- if (profile_node == NULL) {
- printk(KERN_WARNING "Cannot find profiler node\n");
- return r;
- }
-
- r = request_irq(profile_node->dn.recvirq, profile_interrupt,
- IRQF_DISABLED, "profiler", NULL);
-
- if (r < 0) {
- profile_node = NULL;
- printk(KERN_WARNING "Cannot get profiler IRQ\n");
- return r;
- }
-
- ops->start = profile_start;
- ops->stop = profile_stop;
- ops->cpu_type = "timer";
-
- memset(cpu_map, 0, sizeof(cpu_map));
-
- on_each_cpu(ubicom32_build_cpu_th_mask, &th_all_mask, 1);
-
- memset(®s, 0, sizeof(regs));
-
- return r;
-}
-
-/*
- * oprofile_arch_exit()
- *
- * External call to take outselves out.
- * Make sure backend is not running.
- */
-void oprofile_arch_exit(void)
-{
- BUG_ON(profile_node->enabled);
-}
+++ /dev/null
-/*
- * drivers/net/ubi32-eth.c
- * Ubicom32 hardware random number generator driver.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/hw_random.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/ip5000.h>
-
-#define MODULE_NAME "ubicom32_rng"
-
-static int ubicom32_rng_data_present(struct hwrng *rng, int wait)
-{
- int data, i;
-
- for (i = 0; i < 20; i++) {
- data = *(int *)(TIMER_BASE + TIMER_TRN);
- if (data || !wait)
- break;
- udelay(10);
- }
- return data;
-}
-
-static int ubicom32_rng_data_read(struct hwrng *rng, u32 *data)
-{
- *data = *(int *)(TIMER_BASE + TIMER_TRN);
- return 4;
-}
-
-static int ubicom32_rng_init(struct hwrng *rng)
-{
- printk(KERN_INFO "ubicom32 rng init\n");
- *(int *)(TIMER_BASE + TIMER_TRN_CFG) = TIMER_TRN_CFG_ENABLE_OSC;
- return 0;
-}
-
-static void ubicom32_rng_cleanup(struct hwrng *rng)
-{
- printk(KERN_INFO "ubicom32 rng cleanup\n");
- *(int *)(TIMER_BASE + TIMER_TRN_CFG) = 0;
-}
-
-static struct hwrng ubicom32_rng = {
- .name = MODULE_NAME,
- .init = ubicom32_rng_init,
- .cleanup = ubicom32_rng_cleanup,
- .data_present = ubicom32_rng_data_present,
- .data_read = ubicom32_rng_data_read,
- .priv = 0,
-};
-
-static int __init mod_init(void)
-{
- int err;
-
- printk(KERN_INFO "ubicom32 rng started\n");
- err = hwrng_register(&ubicom32_rng);
- if (err) {
- printk(KERN_ERR "ubicom32 rng register failed (%d)\n",
- err);
- }
-
- return err;
-}
-
-static void __exit mod_exit(void)
-{
- printk(KERN_INFO "ubicom32 rng stopped\n");
- hwrng_unregister(&ubicom32_rng);
-}
-
-module_init(mod_init);
-module_exit(mod_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ubicom, Inc.");
-MODULE_DESCRIPTION("H/W rng driver for ubicom32 processor");
-MODULE_VERSION("1:1.0.a");
+++ /dev/null
-/*
- * drivers/mmc/host/ubicom32sd.c
- * Ubicom32 Secure Digital Host Controller Interface driver
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/scatterlist.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-
-#include <asm/ubicom32sd.h>
-
-#define DRIVER_NAME "ubicom32sd"
-
-#define sd_printk(...)
-//#define sd_printk printk
-
-#define SDTIO_VP_VERSION 3
-
-#define SDTIO_MAX_SG_BLOCKS 16
-
-enum sdtio_commands {
- SDTIO_COMMAND_NOP,
- SDTIO_COMMAND_SETUP,
- SDTIO_COMMAND_SETUP_SDIO,
- SDTIO_COMMAND_EXECUTE,
- SDTIO_COMMAND_RESET,
-};
-
-#define SDTIO_COMMAND_SHIFT 24
-#define SDTIO_COMMAND_FLAG_STOP_RSP_CRC (1 << 10)
-#define SDTIO_COMMAND_FLAG_STOP_RSP_136 (1 << 9)
-#define SDTIO_COMMAND_FLAG_STOP_RSP (1 << 8)
-#define SDTIO_COMMAND_FLAG_STOP_CMD (1 << 7)
-#define SDTIO_COMMAND_FLAG_DATA_STREAM (1 << 6)
-#define SDTIO_COMMAND_FLAG_DATA_RD (1 << 5)
-#define SDTIO_COMMAND_FLAG_DATA_WR (1 << 4)
-#define SDTIO_COMMAND_FLAG_CMD_RSP_CRC (1 << 3)
-#define SDTIO_COMMAND_FLAG_CMD_RSP_136 (1 << 2)
-#define SDTIO_COMMAND_FLAG_CMD_RSP (1 << 1)
-#define SDTIO_COMMAND_FLAG_CMD (1 << 0)
-
-/*
- * SDTIO_COMMAND_SETUP_SDIO
- */
-#define SDTIO_COMMAND_FLAG_SDIO_INT_EN (1 << 0)
-
-/*
- * SDTIO_COMMAND_SETUP
- * clock speed in arg
- */
-#define SDTIO_COMMAND_FLAG_4BIT (1 << 3)
-#define SDTIO_COMMAND_FLAG_1BIT (1 << 2)
-#define SDTIO_COMMAND_FLAG_SET_CLOCK (1 << 1)
-#define SDTIO_COMMAND_FLAG_SET_WIDTH (1 << 0)
-
-#define SDTIO_COMMAND_FLAG_CMD_RSP_MASK (SDTIO_COMMAND_FLAG_CMD_RSP | SDTIO_COMMAND_FLAG_CMD_RSP_136)
-#define SDTIO_COMMAND_FLAG_STOP_RSP_MASK (SDTIO_COMMAND_FLAG_STOP_RSP | SDTIO_COMMAND_FLAG_STOP_RSP_136)
-#define SDTIO_COMMAND_FLAG_RSP_MASK (SDTIO_COMMAND_FLAG_CMD_RSP_MASK | SDTIO_COMMAND_FLAG_STOP_RSP_MASK)
-
-struct sdtio_vp_sg {
- volatile void *addr;
- volatile u32_t len;
-};
-
-#define SDTIO_VP_INT_STATUS_DONE (1 << 31)
-#define SDTIO_VP_INT_STATUS_SDIO_INT (1 << 10)
-#define SDTIO_VP_INT_STATUS_DATA_CRC_ERR (1 << 9)
-#define SDTIO_VP_INT_STATUS_DATA_PROG_ERR (1 << 8)
-#define SDTIO_VP_INT_STATUS_DATA_TIMEOUT (1 << 7)
-#define SDTIO_VP_INT_STATUS_STOP_RSP_CRC (1 << 6)
-#define SDTIO_VP_INT_STATUS_STOP_RSP_TIMEOUT (1 << 5)
-#define SDTIO_VP_INT_STATUS_CMD_RSP_CRC (1 << 4)
-#define SDTIO_VP_INT_STATUS_CMD_RSP_TIMEOUT (1 << 3)
-#define SDTIO_VP_INT_STATUS_CMD_TIMEOUT (1 << 2)
-#define SDTIO_VP_INT_STATUS_CARD1_INSERT (1 << 1)
-#define SDTIO_VP_INT_STATUS_CARD0_INSERT (1 << 0)
-
-struct sdtio_vp_regs {
- u32_t version;
- u32_t f_max;
- u32_t f_min;
-
- volatile u32_t int_status;
-
- volatile u32_t command;
- volatile u32_t arg;
-
- volatile u32_t cmd_opcode;
- volatile u32_t cmd_arg;
- volatile u32_t cmd_rsp0;
- volatile u32_t cmd_rsp1;
- volatile u32_t cmd_rsp2;
- volatile u32_t cmd_rsp3;
-
- volatile u32_t stop_opcode;
- volatile u32_t stop_arg;
- volatile u32_t stop_rsp0;
- volatile u32_t stop_rsp1;
- volatile u32_t stop_rsp2;
- volatile u32_t stop_rsp3;
-
- volatile u32_t data_timeout_ns;
- volatile u16_t data_blksz;
- volatile u16_t data_blkct;
- volatile u32_t data_bytes_transferred;
- volatile u32_t sg_len;
- struct sdtio_vp_sg sg[SDTIO_MAX_SG_BLOCKS];
-};
-
-struct ubicom32sd_data {
- const struct ubicom32sd_platform_data *pdata;
-
- struct mmc_host *mmc;
-
- /*
- * Lock used to protect the data structure
- spinlock_t lock;
- */
- int int_en;
- int int_pend;
-
- /*
- * Receive and transmit interrupts used for communicating
- * with hardware
- */
- int irq_tx;
- int irq_rx;
-
- /*
- * Current outstanding mmc request
- */
- struct mmc_request *mrq;
-
- /*
- * Hardware registers
- */
- struct sdtio_vp_regs *regs;
-};
-
-/*****************************************************************************\
- * *
- * Suspend/resume *
- * *
-\*****************************************************************************/
-
-#if 0//def CONFIG_PM
-
-int ubicom32sd_suspend_host(struct ubicom32sd_host *host, pm_message_t state)
-{
- int ret;
-
- ret = mmc_suspend_host(host->mmc, state);
- if (ret)
- return ret;
-
- free_irq(host->irq, host);
-
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(ubicom32sd_suspend_host);
-
-int ubicom32sd_resume_host(struct ubicom32sd_host *host)
-{
- int ret;
-
- if (host->flags & UBICOM32SD_USE_DMA) {
- if (host->ops->enable_dma)
- host->ops->enable_dma(host);
- }
-
- ret = request_irq(host->irq, ubicom32sd_irq, IRQF_SHARED,
- mmc_hostname(host->mmc), host);
- if (ret)
- return ret;
-
- ubicom32sd_init(host);
- mmiowb();
-
- ret = mmc_resume_host(host->mmc);
- if (ret)
- return ret;
-
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(ubicom32sd_resume_host);
-
-#endif /* CONFIG_PM */
-
-/*
- * ubicom32sd_send_command_sync
- */
-static void ubicom32sd_send_command_sync(struct ubicom32sd_data *ud, u32_t command, u32_t arg)
-{
- ud->regs->command = command;
- ud->regs->arg = arg;
- ubicom32_set_interrupt(ud->irq_tx);
- while (ud->regs->command) {
- ndelay(100);
- }
-}
-
-/*
- * ubicom32sd_send_command
- */
-static void ubicom32sd_send_command(struct ubicom32sd_data *ud, u32_t command, u32_t arg)
-{
- ud->regs->command = command;
- ud->regs->arg = arg;
- ubicom32_set_interrupt(ud->irq_tx);
-}
-
-/*
- * ubicom32sd_reset
- */
-static void ubicom32sd_reset(struct ubicom32sd_data *ud)
-{
- ubicom32sd_send_command_sync(ud, SDTIO_COMMAND_RESET << SDTIO_COMMAND_SHIFT, 0);
- ud->regs->int_status = 0;
-}
-
-/*
- * ubicom32sd_mmc_request
- */
-static void ubicom32sd_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
-{
- struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
- u32_t command = SDTIO_COMMAND_EXECUTE << SDTIO_COMMAND_SHIFT;
- int ret = 0;
-
- WARN(ud->mrq != NULL, "ud->mrq still set to %p\n", ud->mrq);
- //pr_debug("send cmd %08x arg %08x flags %08x\n", cmd->opcode, cmd->arg, cmd->flags);
-
- if (mrq->cmd) {
- struct mmc_command *cmd = mrq->cmd;
-
- sd_printk("%s:\t\t\tsetup cmd %02d arg %08x flags %08x\n", mmc_hostname(mmc), cmd->opcode, cmd->arg, cmd->flags);
-
- ud->regs->cmd_opcode = cmd->opcode;
- ud->regs->cmd_arg = cmd->arg;
-
- command |= SDTIO_COMMAND_FLAG_CMD;
-
- if (cmd->flags & MMC_RSP_PRESENT) {
- command |= SDTIO_COMMAND_FLAG_CMD_RSP;
- }
-
- if (cmd->flags & MMC_RSP_136) {
- command |= SDTIO_COMMAND_FLAG_CMD_RSP_136;
- }
-
- if (cmd->flags & MMC_RSP_CRC) {
- command |= SDTIO_COMMAND_FLAG_CMD_RSP_CRC;
- }
- }
-
- if (mrq->data) {
- struct mmc_data *data = mrq->data;
- struct scatterlist *sg = data->sg;
- int i;
-
-printk("%s:\t\t\tsetup data blksz %d num %d sglen=%d fl=%08x Tns=%u\n", mmc_hostname(mmc), data->blksz, data->blocks, data->sg_len, data->flags, data->timeout_ns);
-
- sd_printk("%s:\t\t\tsetup data blksz %d num %d sglen=%d fl=%08x Tns=%u\n",
- mmc_hostname(mmc), data->blksz, data->blocks, data->sg_len,
- data->flags, data->timeout_ns);
-
- if (data->sg_len > SDTIO_MAX_SG_BLOCKS) {
- ret = -EINVAL;
- data->error = -EINVAL;
- goto fail;
- }
-
- ud->regs->data_timeout_ns = data->timeout_ns;
- ud->regs->data_blksz = data->blksz;
- ud->regs->data_blkct = data->blocks;
- ud->regs->sg_len = data->sg_len;
-
- /*
- * Load all of our sg list into the driver sg buffer
- */
- for (i = 0; i < data->sg_len; i++) {
- sd_printk("%s: sg %d = %p %d\n", mmc_hostname(mmc), i, sg_virt(sg), sg->length);
- ud->regs->sg[i].addr = sg_virt(sg);
- ud->regs->sg[i].len = sg->length;
- if (((u32_t)ud->regs->sg[i].addr & 0x03) || (sg->length & 0x03)) {
- sd_printk("%s: Need aligned buffers\n", mmc_hostname(mmc));
- ret = -EINVAL;
- data->error = -EINVAL;
- goto fail;
- }
- sg++;
- }
- if (data->flags & MMC_DATA_READ) {
- command |= SDTIO_COMMAND_FLAG_DATA_RD;
- } else if (data->flags & MMC_DATA_WRITE) {
- command |= SDTIO_COMMAND_FLAG_DATA_WR;
- } else if (data->flags & MMC_DATA_STREAM) {
- command |= SDTIO_COMMAND_FLAG_DATA_STREAM;
- }
- }
-
- if (mrq->stop) {
- struct mmc_command *stop = mrq->stop;
- sd_printk("%s: \t\t\tsetup stop %02d arg %08x flags %08x\n", mmc_hostname(mmc), stop->opcode, stop->arg, stop->flags);
-
- ud->regs->stop_opcode = stop->opcode;
- ud->regs->stop_arg = stop->arg;
-
- command |= SDTIO_COMMAND_FLAG_STOP_CMD;
-
- if (stop->flags & MMC_RSP_PRESENT) {
- command |= SDTIO_COMMAND_FLAG_STOP_RSP;
- }
-
- if (stop->flags & MMC_RSP_136) {
- command |= SDTIO_COMMAND_FLAG_STOP_RSP_136;
- }
-
- if (stop->flags & MMC_RSP_CRC) {
- command |= SDTIO_COMMAND_FLAG_STOP_RSP_CRC;
- }
- }
-
- ud->mrq = mrq;
-
- sd_printk("%s: Sending command %08x\n", mmc_hostname(mmc), command);
-
- ubicom32sd_send_command(ud, command, 0);
-
- return;
-fail:
- sd_printk("%s: mmcreq ret = %d\n", mmc_hostname(mmc), ret);
- mrq->cmd->error = ret;
- mmc_request_done(mmc, mrq);
-}
-
-/*
- * ubicom32sd_mmc_set_ios
- */
-static void ubicom32sd_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-{
- struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
- u32_t command = SDTIO_COMMAND_SETUP << SDTIO_COMMAND_SHIFT;
- u32_t arg = 0;
- sd_printk("%s: ios call bw:%u pm:%u clk:%u\n", mmc_hostname(mmc), 1 << ios->bus_width, ios->power_mode, ios->clock);
-
- switch (ios->bus_width) {
- case MMC_BUS_WIDTH_1:
- command |= SDTIO_COMMAND_FLAG_SET_WIDTH | SDTIO_COMMAND_FLAG_1BIT;
- break;
-
- case MMC_BUS_WIDTH_4:
- command |= SDTIO_COMMAND_FLAG_SET_WIDTH | SDTIO_COMMAND_FLAG_4BIT;
- break;
- }
-
- if (ios->clock) {
- arg = ios->clock;
- command |= SDTIO_COMMAND_FLAG_SET_CLOCK;
- }
-
- switch (ios->power_mode) {
-
- /*
- * Turn off the SD bus (power + clock)
- */
- case MMC_POWER_OFF:
- gpio_set_value(ud->pdata->cards[0].pin_pwr, !ud->pdata->cards[0].pwr_polarity);
- command |= SDTIO_COMMAND_FLAG_SET_CLOCK;
- break;
-
- /*
- * Turn on the power to the SD bus
- */
- case MMC_POWER_ON:
- gpio_set_value(ud->pdata->cards[0].pin_pwr, ud->pdata->cards[0].pwr_polarity);
- break;
-
- /*
- * Turn on the clock to the SD bus
- */
- case MMC_POWER_UP:
- /*
- * Done above
- */
- break;
- }
-
- ubicom32sd_send_command_sync(ud, command, arg);
-
- /*
- * Let the power settle down
- */
- udelay(500);
-}
-
-/*
- * ubicom32sd_mmc_get_cd
- */
-static int ubicom32sd_mmc_get_cd(struct mmc_host *mmc)
-{
- struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
- sd_printk("%s: get cd %u %u\n", mmc_hostname(mmc), ud->pdata->cards[0].pin_cd, gpio_get_value(ud->pdata->cards[0].pin_cd));
-
- return gpio_get_value(ud->pdata->cards[0].pin_cd) ?
- ud->pdata->cards[0].cd_polarity :
- !ud->pdata->cards[0].cd_polarity;
-}
-
-/*
- * ubicom32sd_mmc_get_ro
- */
-static int ubicom32sd_mmc_get_ro(struct mmc_host *mmc)
-{
- struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
- sd_printk("%s: get ro %u %u\n", mmc_hostname(mmc), ud->pdata->cards[0].pin_wp, gpio_get_value(ud->pdata->cards[0].pin_wp));
-
- return gpio_get_value(ud->pdata->cards[0].pin_wp) ?
- ud->pdata->cards[0].wp_polarity :
- !ud->pdata->cards[0].wp_polarity;
-}
-
-/*
- * ubicom32sd_mmc_enable_sdio_irq
- */
-static void ubicom32sd_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
-{
- struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
-
- ud->int_en = enable;
- if (enable && ud->int_pend) {
- ud->int_pend = 0;
- mmc_signal_sdio_irq(mmc);
- }
-}
-
-/*
- * ubicom32sd_interrupt
- */
-static irqreturn_t ubicom32sd_interrupt(int irq, void *dev)
-{
- struct mmc_host *mmc = (struct mmc_host *)dev;
- struct mmc_request *mrq;
- struct ubicom32sd_data *ud;
- u32_t int_status;
-
- if (!mmc) {
- return IRQ_HANDLED;
- }
-
- ud = (struct ubicom32sd_data *)mmc_priv(mmc);
- if (!ud) {
- return IRQ_HANDLED;
- }
-
- int_status = ud->regs->int_status;
- ud->regs->int_status &= ~int_status;
-
- if (int_status & SDTIO_VP_INT_STATUS_SDIO_INT) {
- if (ud->int_en) {
- ud->int_pend = 0;
- mmc_signal_sdio_irq(mmc);
- } else {
- ud->int_pend++;
- }
- }
-
- if (!(int_status & SDTIO_VP_INT_STATUS_DONE)) {
- return IRQ_HANDLED;
- }
-
- mrq = ud->mrq;
- if (!mrq) {
- sd_printk("%s: Spurious interrupt", mmc_hostname(mmc));
- return IRQ_HANDLED;
- }
- ud->mrq = NULL;
-
- /*
- * SDTIO_VP_INT_DONE
- */
- if (mrq->cmd->flags & MMC_RSP_PRESENT) {
- struct mmc_command *cmd = mrq->cmd;
- cmd->error = 0;
-
- if ((cmd->flags & MMC_RSP_CRC) && (int_status & SDTIO_VP_INT_STATUS_CMD_RSP_CRC)) {
- cmd->error = -EILSEQ;
- } else if (int_status & SDTIO_VP_INT_STATUS_CMD_RSP_TIMEOUT) {
- cmd->error = -ETIMEDOUT;
- goto done;
- } else if (cmd->flags & MMC_RSP_136) {
- cmd->resp[0] = ud->regs->cmd_rsp0;
- cmd->resp[1] = ud->regs->cmd_rsp1;
- cmd->resp[2] = ud->regs->cmd_rsp2;
- cmd->resp[3] = ud->regs->cmd_rsp3;
- } else {
- cmd->resp[0] = ud->regs->cmd_rsp0;
- }
- sd_printk("%s:\t\t\tResponse %08x %08x %08x %08x err=%d\n", mmc_hostname(mmc), cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3], cmd->error);
- }
-
- if (mrq->data) {
- struct mmc_data *data = mrq->data;
-
- if (int_status & SDTIO_VP_INT_STATUS_DATA_TIMEOUT) {
- data->error = -ETIMEDOUT;
- sd_printk("%s:\t\t\tData Timeout\n", mmc_hostname(mmc));
- goto done;
- } else if (int_status & SDTIO_VP_INT_STATUS_DATA_CRC_ERR) {
- data->error = -EILSEQ;
- sd_printk("%s:\t\t\tData CRC\n", mmc_hostname(mmc));
- goto done;
- } else if (int_status & SDTIO_VP_INT_STATUS_DATA_PROG_ERR) {
- data->error = -EILSEQ;
- sd_printk("%s:\t\t\tData Program Error\n", mmc_hostname(mmc));
- goto done;
- } else {
- data->error = 0;
- data->bytes_xfered = ud->regs->data_bytes_transferred;
- }
- }
-
- if (mrq->stop && (mrq->stop->flags & MMC_RSP_PRESENT)) {
- struct mmc_command *stop = mrq->stop;
- stop->error = 0;
-
- if ((stop->flags & MMC_RSP_CRC) && (int_status & SDTIO_VP_INT_STATUS_STOP_RSP_CRC)) {
- stop->error = -EILSEQ;
- } else if (int_status & SDTIO_VP_INT_STATUS_STOP_RSP_TIMEOUT) {
- stop->error = -ETIMEDOUT;
- goto done;
- } else if (stop->flags & MMC_RSP_136) {
- stop->resp[0] = ud->regs->stop_rsp0;
- stop->resp[1] = ud->regs->stop_rsp1;
- stop->resp[2] = ud->regs->stop_rsp2;
- stop->resp[3] = ud->regs->stop_rsp3;
- } else {
- stop->resp[0] = ud->regs->stop_rsp0;
- }
- sd_printk("%s:\t\t\tStop Response %08x %08x %08x %08x err=%d\n", mmc_hostname(mmc), stop->resp[0], stop->resp[1], stop->resp[2], stop->resp[3], stop->error);
- }
-
-done:
- mmc_request_done(mmc, mrq);
-
- return IRQ_HANDLED;
-}
-
-static struct mmc_host_ops ubicom32sd_ops = {
- .request = ubicom32sd_mmc_request,
- .set_ios = ubicom32sd_mmc_set_ios,
- .get_ro = ubicom32sd_mmc_get_ro,
- .get_cd = ubicom32sd_mmc_get_cd,
- .enable_sdio_irq = ubicom32sd_mmc_enable_sdio_irq,
-};
-
-/*
- * ubicom32sd_probe
- */
-static int __devinit ubicom32sd_probe(struct platform_device *pdev)
-{
- struct ubicom32sd_platform_data *pdata = (struct ubicom32sd_platform_data *)pdev->dev.platform_data;
- struct mmc_host *mmc;
- struct ubicom32sd_data *ud;
- struct resource *res_regs;
- struct resource *res_irq_tx;
- struct resource *res_irq_rx;
- int ret;
-
- /*
- * Get our resources, regs is the hardware driver base address
- * and the tx and rx irqs are used to communicate with the
- * hardware driver.
- */
- res_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- res_irq_tx = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- res_irq_rx = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
- if (!res_regs || !res_irq_tx || !res_irq_rx) {
- ret = -EINVAL;
- goto fail;
- }
-
- /*
- * Reserve any gpios we need
- */
- ret = gpio_request(pdata->cards[0].pin_wp, "sd-wp");
- if (ret) {
- goto fail;
- }
- gpio_direction_input(pdata->cards[0].pin_wp);
-
- ret = gpio_request(pdata->cards[0].pin_cd, "sd-cd");
- if (ret) {
- goto fail_cd;
- }
- gpio_direction_input(pdata->cards[0].pin_cd);
-
- /*
- * HACK: for the dual port controller on port F, we don't support the second port right now
- */
- if (pdata->ncards > 1) {
- ret = gpio_request(pdata->cards[1].pin_pwr, "sd-pwr");
- gpio_direction_output(pdata->cards[1].pin_pwr, !pdata->cards[1].pwr_polarity);
- gpio_direction_output(pdata->cards[1].pin_pwr, pdata->cards[1].pwr_polarity);
- }
-
- ret = gpio_request(pdata->cards[0].pin_pwr, "sd-pwr");
- if (ret) {
- goto fail_pwr;
- }
- gpio_direction_output(pdata->cards[0].pin_pwr, !pdata->cards[0].pwr_polarity);
-
- /*
- * Allocate the MMC driver, it includes memory for our data.
- */
- mmc = mmc_alloc_host(sizeof(struct ubicom32sd_data), &pdev->dev);
- if (!mmc) {
- ret = -ENOMEM;
- goto fail_mmc;
- }
- ud = (struct ubicom32sd_data *)mmc_priv(mmc);
- ud->mmc = mmc;
- ud->pdata = pdata;
- ud->regs = (struct sdtio_vp_regs *)res_regs->start;
- ud->irq_tx = res_irq_tx->start;
- ud->irq_rx = res_irq_rx->start;
- platform_set_drvdata(pdev, mmc);
-
- ret = request_irq(ud->irq_rx, ubicom32sd_interrupt, IRQF_DISABLED, mmc_hostname(mmc), mmc);
- if (ret) {
- goto fail_mmc;
- }
-
- /*
- * Fill in the mmc structure
- */
- mmc->ops = &ubicom32sd_ops;
- mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NEEDS_POLL | MMC_CAP_SDIO_IRQ |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
-
- mmc->f_min = ud->regs->f_min;
- mmc->f_max = ud->regs->f_max;
- mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-
- /*
- * Setup some restrictions on transfers
- *
- * We allow up to SDTIO_MAX_SG_BLOCKS of data to DMA into, there are
- * not really any "max_seg_size", "max_req_size", or "max_blk_count"
- * restrictions (must be less than U32_MAX though), pick
- * something large?!...
- *
- * The hardware can do up to 4095 bytes per block, since the spec
- * only requires 2048, we'll set it to that and not worry about
- * potential weird blk lengths.
- */
- mmc->max_hw_segs = SDTIO_MAX_SG_BLOCKS;
- mmc->max_phys_segs = SDTIO_MAX_SG_BLOCKS;
- mmc->max_seg_size = 1024 * 1024;
- mmc->max_req_size = 1024 * 1024;
- mmc->max_blk_count = 1024;
-
- mmc->max_blk_size = 2048;
-
- ubicom32sd_reset(ud);
-
- /*
- * enable interrupts
- */
- ud->int_en = 0;
- ubicom32sd_send_command_sync(ud, SDTIO_COMMAND_SETUP_SDIO << SDTIO_COMMAND_SHIFT | SDTIO_COMMAND_FLAG_SDIO_INT_EN, 0);
-
- mmc_add_host(mmc);
-
- printk(KERN_INFO "%s at %p, irq %d/%d\n", mmc_hostname(mmc),
- ud->regs, ud->irq_tx, ud->irq_rx);
- return 0;
-
-fail_mmc:
- gpio_free(pdata->cards[0].pin_pwr);
-fail_pwr:
- gpio_free(pdata->cards[0].pin_cd);
-fail_cd:
- gpio_free(pdata->cards[0].pin_wp);
-fail:
- return ret;
-}
-
-/*
- * ubicom32sd_remove
- */
-static int __devexit ubicom32sd_remove(struct platform_device *pdev)
-{
- struct mmc_host *mmc = platform_get_drvdata(pdev);
-
- platform_set_drvdata(pdev, NULL);
-
- if (mmc) {
- struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
-
- gpio_free(ud->pdata->cards[0].pin_pwr);
- gpio_free(ud->pdata->cards[0].pin_cd);
- gpio_free(ud->pdata->cards[0].pin_wp);
-
- mmc_remove_host(mmc);
- mmc_free_host(mmc);
- }
-
- /*
- * Note that our data is allocated as part of the mmc structure
- * so we don't need to free it.
- */
- return 0;
-}
-
-static struct platform_driver ubicom32sd_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
- .probe = ubicom32sd_probe,
- .remove = __devexit_p(ubicom32sd_remove),
-#if 0
- .suspend = ubicom32sd_suspend,
- .resume = ubicom32sd_resume,
-#endif
-};
-
-/*
- * ubicom32sd_init
- */
-static int __init ubicom32sd_init(void)
-{
- return platform_driver_register(&ubicom32sd_driver);
-}
-module_init(ubicom32sd_init);
-
-/*
- * ubicom32sd_exit
- */
-static void __exit ubicom32sd_exit(void)
-{
- platform_driver_unregister(&ubicom32sd_driver);
-}
-module_exit(ubicom32sd_exit);
-
-MODULE_AUTHOR("Patrick Tjin");
-MODULE_DESCRIPTION("Ubicom32 Secure Digital Host Controller Interface driver");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Micron SPI-ER NAND Flash Memory
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
-*/
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/err.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#define NAND_SPI_ER_BLOCK_FROM_ROW(row) (row >> 6)
-
-#define NAND_SPI_ER_STATUS_P_FAIL (1 << 3)
-#define NAND_SPI_ER_STATUS_E_FAIL (1 << 2)
-#define NAND_SPI_ER_STATUS_OIP (1 << 0)
-
-#define NAND_SPI_ER_LAST_ROW_INVALID 0xFFFFFFFF
-#define NAND_SPI_ER_BAD_BLOCK_MARK_OFFSET 0x08
-
-struct nand_spi_er_device {
- const char *name;
-
- uint8_t id0;
- uint8_t id1;
-
- unsigned int blocks;
- unsigned int pages_per_block;
- unsigned int page_size;
- unsigned int write_size;
- unsigned int erase_size;
-};
-
-struct nand_spi_er {
- char name[24];
-
- const struct nand_spi_er_device *device;
-
- struct mutex lock;
- struct spi_device *spi;
-
- struct mtd_info mtd;
-
- unsigned int last_row; /* the last row we fetched */
-
- /*
- * Bad block table (MUST be last in strcuture)
- */
- unsigned long nbb;
- unsigned long bbt[0];
-};
-
-const struct nand_spi_er_device nand_spi_er_devices[] = {
- {
- name: "MT29F1G01ZDC",
- id0: 0x2C,
- id1: 0x12,
- blocks: 1024,
- pages_per_block: 64,
- page_size: 2048,
- write_size: 512,
- erase_size: 64 * 2048,
- },
- {
- name: "MT29F1G01ZDC",
- id0: 0x2C,
- id1: 0x13,
- blocks: 1024,
- pages_per_block: 64,
- page_size: 2048,
- write_size: 512,
- erase_size: 64 * 2048,
- },
-};
-
-static int read_only = 0;
-module_param(read_only, int, 0);
-MODULE_PARM_DESC(read_only, "Leave device locked");
-
-/*
- * nand_spi_er_get_feature
- * Get Feature register
- */
-static int nand_spi_er_get_feature(struct nand_spi_er *chip, int reg, uint8_t *data)
-{
- uint8_t txbuf[2];
- uint8_t rxbuf[1];
- int res;
-
- txbuf[0] = 0x0F;
- txbuf[1] = reg;
- res = spi_write_then_read(chip->spi, txbuf, 2, rxbuf, 1);
- if (res) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: failed get feature res=%d\n", chip->name, res);
- return res;
- }
- *data = rxbuf[0];
- return 0;
-}
-
-/*
- * nand_spi_er_busywait
- * Wait until the chip is not busy
- */
-static int nand_spi_er_busywait(struct nand_spi_er *chip, uint8_t *data)
-{
- int i;
-
- for (i = 0; i < 100; i++) {
- int res = nand_spi_er_get_feature(chip, 0xC0, data);
- if (res) {
- return res;
- }
- if (!(*data & NAND_SPI_ER_STATUS_OIP)) {
- break;
- }
- }
-
- return 0;
-}
-
-/*
- * nand_spi_er_erase
- * Erase a block, parameters must be block aligned
- */
-static int nand_spi_er_erase(struct mtd_info *mtd, struct erase_info *instr)
-{
- struct nand_spi_er *chip = mtd->priv;
- struct spi_device *spi = chip->spi;
- uint8_t txbuf[4];
- int res;
-
- DEBUG(MTD_DEBUG_LEVEL3, "%s: erase addr:%x len:%x\n", chip->name, instr->addr, instr->len);
-
- if ((instr->addr + instr->len) > mtd->size) {
- return -EINVAL;
- }
-
- if (instr->addr & (chip->device->erase_size - 1)) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: erase address is not aligned %x\n", chip->name, instr->addr);
- return -EINVAL;
- }
-
- if (instr->len & (chip->device->erase_size - 1)) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: erase len is not aligned %x\n", chip->name, instr->len);
- return -EINVAL;
- }
-
- mutex_lock(&chip->lock);
- chip->last_row = NAND_SPI_ER_LAST_ROW_INVALID;
-
- while (instr->len) {
- uint32_t block = instr->addr >> 17;
- uint32_t row = block << 6;
- uint8_t stat;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: block erase row:%x block:%x addr:%x rem:%x\n", chip->name, row, block, instr->addr, instr->len);
-
- /*
- * Write enable
- */
- txbuf[0] = 0x06;
- res = spi_write(spi, txbuf, 1);
- if (res) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: failed write enable res=%d\n", chip->name, res);
- mutex_unlock(&chip->lock);
- return res;
- }
-
- /*
- * Test for bad block
- */
- if (test_bit(block, chip->bbt)) {
- instr->fail_addr = block << 17;
- instr->state = MTD_ERASE_FAILED;
- res = -EBADMSG;
- goto done;
- }
-
- /*
- * Block erase
- */
- txbuf[0] = 0xD8;
- txbuf[1] = 0x00;
- txbuf[2] = row >> 8;
- txbuf[3] = row & 0xFF;
- res = spi_write(spi, txbuf, 4);
- if (res) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: failed block erase res=%d\n", chip->name, res);
- instr->fail_addr = block << 17;
- instr->state = MTD_ERASE_FAILED;
- goto done;
- }
-
- /*
- * Wait
- */
- res = nand_spi_er_busywait(chip, &stat);
- if (res || (stat & NAND_SPI_ER_STATUS_OIP)) {
- instr->fail_addr = block << 17;
- instr->state = MTD_ERASE_FAILED;
- DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive res=%d stat=%02x\n", chip->name, res, stat);
- if (res) {
- goto done;
- }
-
- /*
- * Chip is stuck?
- */
- res = -EIO;
- goto done;
- }
-
- /*
- * Check the status register
- */
- if (stat & NAND_SPI_ER_STATUS_E_FAIL) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: E_FAIL signalled (%02x)\n", chip->name, stat);
- instr->fail_addr = block << 17;
- instr->state = MTD_ERASE_FAILED;
- goto done;
- }
-
- /*
- * Next
- */
- block++;
- instr->len -= chip->device->erase_size;
- instr->addr += chip->device->erase_size;
- }
-
- instr->state = MTD_ERASE_DONE;
-
- mutex_unlock(&chip->lock);
- return 0;
-
-done:
- /*
- * Write disable
- */
- txbuf[0] = 0x04;
- res = spi_write(spi, txbuf, 1);
- if (res) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: failed write disable res=%d\n", chip->name, res);
- }
-
- mutex_unlock(&chip->lock);
-
- mtd_erase_callback(instr);
- return 0;
-}
-
-/*
- * nand_spi_er_read
- *
- * return -EUCLEAN: ecc error recovered
- * return -EBADMSG: ecc error not recovered
-*/
-static int nand_spi_er_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
-{
- struct nand_spi_er *chip = mtd->priv;
- struct spi_device *spi = chip->spi;
-
- uint32_t row;
- uint32_t column;
- int retval = 0;
-
- *retlen = 0;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: read block from %llx len %d into %p\n", chip->name, from, len, buf);
-
- /*
- * Zero length reads, nothing to do
- */
- if (len == 0) {
- return 0;
- }
-
- /*
- * Reject reads which go over the end of the flash
- */
- if ((from + len) > mtd->size) {
- return -EINVAL;
- }
-
- /*
- * Get the row and column address to start at
- */
- row = from >> 11;
- column = from & 0x7FF;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: row=%x %d column=%x %d last_row=%x %d\n", chip->name, row, row, column, column, chip->last_row, chip->last_row);
-
- /*
- * Read the data from the chip
- */
- mutex_lock(&chip->lock);
- while (len) {
- uint8_t stat;
- uint8_t txbuf[4];
- struct spi_message message;
- struct spi_transfer x[2];
- int res;
- size_t toread;
-
- /*
- * Figure out how much to read
- *
- * If we are reading from the middle of a page then the most we
- * can read is to the end of the page
- */
- toread = len;
- if (toread > (chip->device->page_size - column)) {
- toread = chip->device->page_size - column;
- }
-
- DEBUG(MTD_DEBUG_LEVEL3, "%s: buf=%p toread=%x row=%x column=%x last_row=%x\n", chip->name, buf, toread, row, column, chip->last_row);
-
- if (chip->last_row != row) {
- /*
- * Check if the block is bad
- */
- if (test_bit(NAND_SPI_ER_BLOCK_FROM_ROW(row), chip->bbt)) {
- mutex_unlock(&chip->lock);
- return -EBADMSG;
- }
-
- /*
- * Load the appropriate page
- */
- txbuf[0] = 0x13;
- txbuf[1] = 0x00;
- txbuf[2] = row >> 8;
- txbuf[3] = row & 0xFF;
- res = spi_write(spi, txbuf, 4);
- if (res) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: failed page load res=%d\n", chip->name, res);
- mutex_unlock(&chip->lock);
- return res;
- }
-
- /*
- * Wait
- */
- res = nand_spi_er_busywait(chip, &stat);
- if (res || (stat & NAND_SPI_ER_STATUS_OIP)) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive res=%d stat=%02x\n", chip->name, res, stat);
- if (res) {
- mutex_unlock(&chip->lock);
- return res;
- }
-
- /*
- * Chip is stuck?
- */
- mutex_unlock(&chip->lock);
- return -EIO;
- }
-
- /*
- * Check the ECC bits
- */
- stat >>= 4;
- if (stat == 1) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: ECC recovered, row=%x\n", chip->name, row);
- retval = -EUCLEAN;
- }
- if (stat == 2) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: failed ECC, row=%x\n", chip->name, row);
- chip->last_row = NAND_SPI_ER_LAST_ROW_INVALID;
- mutex_unlock(&chip->lock);
- return -EBADMSG;
- }
-
- }
-
- chip->last_row = row;
-
- /*
- * Read out the data
- */
- spi_message_init(&message);
- memset(x, 0, sizeof(x));
-
- txbuf[0] = 0x03;
- txbuf[1] = column >> 8;
- txbuf[2] = column & 0xFF;
- txbuf[3] = 0;
- x[0].tx_buf = txbuf;
- x[0].len = 4;
- spi_message_add_tail(&x[0], &message);
-
- x[1].rx_buf = buf;
- x[1].len = toread;
- spi_message_add_tail(&x[1], &message);
-
- res = spi_sync(spi, &message);
- if (res) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: failed data read res=%d\n", chip->name, res);
- mutex_unlock(&chip->lock);
- return res;
- }
- buf += toread;
- len -= toread;
- *retlen += toread;
-
- /*
- * For the next page, increment the row and always start at column 0
- */
- column = 0;
- row++;
- }
-
- mutex_unlock(&chip->lock);
- return retval;
-}
-
-/*
- * nand_spi_er_write
- */
-#define NOT_ALIGNED(x) ((x & (device->write_size - 1)) != 0)
-static int nand_spi_er_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
-{
- struct nand_spi_er *chip = mtd->priv;
- struct spi_device *spi = chip->spi;
- const struct nand_spi_er_device *device = chip->device;
- uint32_t row;
- uint32_t col;
- uint8_t txbuf[4];
- int res;
- size_t towrite;
-
- DEBUG(MTD_DEBUG_LEVEL2, "%s: write block to %llx len %d from %p\n", chip->name, to, len, buf);
-
- *retlen = 0;
-
- /*
- * nothing to write
- */
- if (!len) {
- return 0;
- }
-
- /*
- * Reject writes which go over the end of the flash
- */
- if ((to + len) > mtd->size) {
- return -EINVAL;
- }
-
- /*
- * Check to see if everything is page aligned
- */
- if (NOT_ALIGNED(to) || NOT_ALIGNED(len)) {
- printk(KERN_NOTICE "nand_spi_er_write: Attempt to write non page aligned data\n");
- return -EINVAL;
- }
-
- mutex_lock(&chip->lock);
- chip->last_row = NAND_SPI_ER_LAST_ROW_INVALID;
-
- /*
- * If the first write is a partial write then write at most the number of
- * bytes to get us page aligned and then the remainder will be
- * page aligned. The last bit may be a partial page as well.
- */
- col = to & (device->page_size - 1);
- towrite = device->page_size - col;
- if (towrite > len) {
- towrite = len;
- }
-
- /*
- * Write the data
- */
- row = to >> 11;
- while (len) {
- struct spi_message message;
- struct spi_transfer x[2];
- uint8_t stat;
-
- DEBUG(MTD_DEBUG_LEVEL3, "%s: write %p to row:%x col:%x len:%x rem:%x\n", chip->name, buf, row, col, towrite, len);
-
- /*
- * Write enable
- */
- txbuf[0] = 0x06;
- res = spi_write(spi, txbuf, 1);
- if (res) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: failed write enable res=%d\n", chip->name, res);
- mutex_unlock(&chip->lock);
- return res;
- }
-
- /*
- * Write the data into the cache
- */
- spi_message_init(&message);
- memset(x, 0, sizeof(x));
- txbuf[0] = 0x02;
- txbuf[1] = col >> 8;
- txbuf[2] = col & 0xFF;
- x[0].tx_buf = txbuf;
- x[0].len = 3;
- spi_message_add_tail(&x[0], &message);
- x[1].tx_buf = buf;
- x[1].len = towrite;
- spi_message_add_tail(&x[1], &message);
- res = spi_sync(spi, &message);
- if (res) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: failed cache write res=%d\n", chip->name, res);
- goto done;
- }
-
- /*
- * Program execute
- */
- txbuf[0] = 0x10;
- txbuf[1] = 0x00;
- txbuf[2] = row >> 8;
- txbuf[3] = row & 0xFF;
- res = spi_write(spi, txbuf, 4);
- if (res) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: failed prog execute res=%d\n", chip->name, res);
- goto done;
- }
-
- /*
- * Wait
- */
- res = nand_spi_er_busywait(chip, &stat);
- if (res || (stat & NAND_SPI_ER_STATUS_OIP)) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive res=%d stat=%02x\n", chip->name, res, stat);
- if (res) {
- goto done;
- }
-
- /*
- * Chip is stuck?
- */
- res = -EIO;
- goto done;
- }
-
- if (stat & (1 << 3)) {
- res = -EBADMSG;
- goto done;
- }
-
- row++;
- buf += towrite;
- len -= towrite;
- *retlen += towrite;
-
- /*
- * At this point, we are always page aligned so start at column 0.
- * Note we may not have a full page to write at the end, hence the
- * check if towrite > len.
- */
- col = 0;
- towrite = device->page_size;
- if (towrite > len) {
- towrite = len;
- }
- }
-
- mutex_unlock(&chip->lock);
- return res;
-
-done:
- /*
- * Write disable
- */
- txbuf[0] = 0x04;
- res = spi_write(spi, txbuf, 1);
- if (res) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: failed write disable res=%d\n", chip->name, res);
- }
-
- mutex_unlock(&chip->lock);
-
- return res;
-}
-
-/*
- * nand_spi_er_isbad
- */
-static int nand_spi_er_isbad(struct mtd_info *mtd, loff_t ofs)
-{
- struct nand_spi_er *chip = mtd->priv;
- uint32_t block;
-
- if (ofs & (chip->device->erase_size - 1)) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: address not aligned %llx\n", chip->name, ofs);
- return -EINVAL;
- }
-
- block = ofs >> 17;
-
- return test_bit(block, chip->bbt);
-}
-
-/*
- * nand_spi_er_markbad
- */
-static int nand_spi_er_markbad(struct mtd_info *mtd, loff_t ofs)
-{
- struct nand_spi_er *chip = mtd->priv;
- struct spi_device *spi = chip->spi;
- uint32_t block;
- uint32_t row;
- uint8_t txbuf[7];
- int res;
- uint8_t stat;
-
- if (ofs & (chip->device->erase_size - 1)) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: address not aligned %llx\n", chip->name, ofs);
- return -EINVAL;
- }
-
- block = ofs >> 17;
-
- /*
- * If it's already marked bad, no need to mark it
- */
- if (test_bit(block, chip->bbt)) {
- return 0;
- }
-
- /*
- * Mark it in our cache
- */
- __set_bit(block, chip->bbt);
-
- /*
- * Write the user bad block mark. If it fails, then we really
- * can't do anything about it.
- */
- mutex_lock(&chip->lock);
- chip->last_row = NAND_SPI_ER_LAST_ROW_INVALID;
-
- /*
- * Write enable
- */
- txbuf[0] = 0x06;
- res = spi_write(spi, txbuf, 1);
- if (res) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: failed write enable res=%d\n", chip->name, res);
- mutex_unlock(&chip->lock);
- return res;
- }
-
- /*
- * Write the mark
- */
- txbuf[0] = 0x84;
- txbuf[1] = 0x08;
- txbuf[2] = NAND_SPI_ER_BAD_BLOCK_MARK_OFFSET;
- txbuf[3] = 0xde;
- txbuf[4] = 0xad;
- txbuf[5] = 0xbe;
- txbuf[6] = 0xef;
- res = spi_write(spi, txbuf, 7);
- if (res) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: failed write mark res=%d\n", chip->name, res);
- goto done;
- }
-
- /*
- * Program execute
- */
- row = ofs >> 11;
- txbuf[0] = 0x10;
- txbuf[1] = 0x00;
- txbuf[2] = row >> 8;
- txbuf[3] = row & 0xFF;
- res = spi_write(spi, txbuf, 4);
- if (res) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: failed program execute res=%d\n", chip->name, res);
- goto done;
- }
-
- /*
- * Wait
- */
- res = nand_spi_er_busywait(chip, &stat);
- if (res || (stat & NAND_SPI_ER_STATUS_OIP)) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive res=%d stat=%02x\n", chip->name, res, stat);
- if (res) {
- goto done;
- }
-
- /*
- * Chip is stuck?
- */
- res = -EIO;
- goto done;
- }
-
- if (stat & (1 << 3)) {
- res = -EBADMSG;
- }
-
-done:
- /*
- * Write disable
- */
- txbuf[0] = 0x04;
- res = spi_write(spi, txbuf, 1);
- if (res) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: failed write disable res=%d\n", chip->name, res);
- }
-
- mutex_unlock(&chip->lock);
-
- return res;
-}
-
-/*
- * nand_spi_er_read_bbt
- */
-static int nand_spi_er_read_bbt(struct nand_spi_er *chip)
-{
- int j;
- for (j = 0; j < chip->device->blocks; j++) {
- uint8_t txbuf[4];
- uint8_t rxbuf[16];
- uint32_t bbmark;
- int res;
- unsigned short row = j << 6;
- uint8_t stat;
-
- /*
- * Read Page
- */
- txbuf[0] = 0x13;
- txbuf[1] = 0x00;
- txbuf[2] = row >> 8;
- txbuf[3] = row & 0xFF;
- res = spi_write(chip->spi, txbuf, 4);
- if (res) {
- return res;
- }
-
- /*
- * Wait
- */
- res = nand_spi_er_busywait(chip, &stat);
- if (res || (stat & NAND_SPI_ER_STATUS_OIP)) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive res=%d stat=%02x\n", chip->name, res, stat);
- if (res) {
- return res;
- }
-
- /*
- * Chip is stuck?
- */
- return -EIO;
- }
-
- /*
- * Check factory bad block mark
- */
- txbuf[0] = 0x03;
- txbuf[1] = 0x08;
- txbuf[2] = 0x00;
- txbuf[3] = 0x00;
- res = spi_write_then_read(chip->spi, txbuf, 4, rxbuf, 16);
- if (res) {
- return res;
- }
- if (rxbuf[0] != 0xFF) {
- chip->nbb++;
- __set_bit(j, chip->bbt);
- continue;
- }
-
- memcpy(&bbmark, &rxbuf[8], 4);
- if (bbmark == 0xdeadbeef) {
- chip->nbb++;
- __set_bit(j, chip->bbt);
- }
- }
-
-#if defined(CONFIG_MTD_DEBUG) && (MTD_DEBUG_LEVEL3 <= CONFIG_MTD_DEBUG_VERBOSE)
- printk("%s: Bad Block Table:", chip->name);
- for (j = 0; j < chip->device->blocks; j++) {
- if ((j % 64) == 0) {
- printk("\n%s: block %03x: ", chip->name, j);
- }
- printk("%c", test_bit(j, chip->bbt) ? 'X' : '.');
- }
- printk("\n%s: Bad Block Numbers: ", chip->name);
- for (j = 0; j < chip->device->blocks; j++) {
- if (test_bit(j, chip->bbt)) {
- printk("%x ", j);
- }
- }
- printk("\n");
-#endif
-
- return 0;
-}
-
-#ifndef MODULE
-/*
- * Called at boot time:
- *
- * nand_spi_er=read_only
- * if read_only specified then do not unlock device
- */
-static int __init nand_spi_er_setup(char *str)
-{
- if (str && (strncasecmp(str, "read_only", 9) == 0)) {
- read_only = 1;
- }
- return 0;
-}
-
-__setup("nand_spi_er=", nand_spi_er_setup);
-#endif
-
-/*
- * nand_spi_er_probe
- * Detect and initialize nand_spi_er device.
- */
-static int __devinit nand_spi_er_probe(struct spi_device *spi)
-{
- uint8_t txbuf[3];
- uint8_t rxbuf[2];
- int i;
- int res;
- size_t bbt_bytes;
- struct nand_spi_er *chip;
- const struct nand_spi_er_device *device;
-
- res = spi_setup(spi);
- if (res) {
- return res;
- }
-
- /*
- * Reset
- */
- for (i = 0; i < 2; i++) {
- txbuf[0] = 0xFF;
- res = spi_write(spi, txbuf, 1);
- if (res) {
- return res;
- }
- udelay(250);
- }
- udelay(1000);
-
- /*
- * Read ID
- */
- txbuf[0] = 0x9F;
- txbuf[1] = 0x00;
- res = spi_write_then_read(spi, txbuf, 2, rxbuf, 2);
- if (res) {
- return res;
- }
-
- device = nand_spi_er_devices;
- for (i = 0; i < ARRAY_SIZE(nand_spi_er_devices); i++) {
- if ((device->id0 == rxbuf[0]) && (device->id1 == rxbuf[1])) {
- break;
- }
- device++;
- }
- if (i == ARRAY_SIZE(nand_spi_er_devices)) {
- return -ENODEV;
- }
-
- /*
- * Initialize our chip structure
- */
- bbt_bytes = DIV_ROUND_UP(device->blocks, BITS_PER_BYTE);
- chip = kzalloc(sizeof(struct nand_spi_er) + bbt_bytes, GFP_KERNEL);
- if (!chip) {
- return -ENOMEM;
- }
- snprintf(chip->name, sizeof(chip->name), "%s.%d.%d", device->name, spi->master->bus_num, spi->chip_select);
-
- chip->spi = spi;
- chip->device = device;
- chip->last_row = NAND_SPI_ER_LAST_ROW_INVALID;
-
- mutex_init(&chip->lock);
-
- chip->mtd.type = MTD_NANDFLASH;
- chip->mtd.flags = MTD_WRITEABLE;
-
- /*
- * #blocks * block size * n blocks
- */
- chip->mtd.size = device->blocks * device->pages_per_block * device->page_size;
- chip->mtd.erasesize = device->erase_size;
-
- /*
- * 1 page, optionally we can support partial write (512)
- */
- chip->mtd.writesize = device->write_size;
- chip->mtd.name = device->name;
- chip->mtd.erase = nand_spi_er_erase;
- chip->mtd.read = nand_spi_er_read;
- chip->mtd.write = nand_spi_er_write;
- chip->mtd.block_isbad = nand_spi_er_isbad;
- chip->mtd.block_markbad = nand_spi_er_markbad;
- chip->mtd.priv = chip;
-
- /*
- * Cache the bad block table
- */
- res = nand_spi_er_read_bbt(chip);
- if (res) {
- kfree(chip);
- return res;
- }
-
- /*
- * Un/lock the chip
- */
- txbuf[0] = 0x1F;
- txbuf[1] = 0xA0;
- if (read_only) {
- txbuf[2] = 0x38;
- } else {
- txbuf[2] = 0x00;
- }
- res = spi_write(spi, txbuf, 3);
- if (res) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: failed lock operation res=%d\n", chip->name, res);
- mutex_unlock(&chip->lock);
- return res;
- }
-
- spi_set_drvdata(spi, chip);
-
- printk(KERN_INFO "%s: added device %s size: %u KBytes %u bad blocks %s\n", spi->dev.bus_id, chip->mtd.name, DIV_ROUND_UP(chip->mtd.size, 1024), chip->nbb, read_only ? "[read only]" : "");
- return add_mtd_device(&chip->mtd);
-}
-
-/*
- * nand_spi_er_remove
- */
-static int __devexit nand_spi_er_remove(struct spi_device *spi)
-{
- struct nand_spi_er *chip = spi_get_drvdata(spi);
- int status = 0;
-
- DEBUG(MTD_DEBUG_LEVEL1, "%s: remove\n", spi->dev.bus_id);
- status = del_mtd_device(&chip->mtd);
- if (status == 0)
- kfree(chip);
- return status;
-}
-
-static struct spi_driver nand_spi_er_driver = {
- .driver = {
- .name = "nand-spi-er",
- .bus = &spi_bus_type,
- .owner = THIS_MODULE,
- },
-
- .probe = nand_spi_er_probe,
- .remove = __devexit_p(nand_spi_er_remove),
-
- /* FIXME: investigate suspend and resume... */
-};
-
-/*
- * nand_spi_er_init
- */
-static int __init nand_spi_er_init(void)
-{
- return spi_register_driver(&nand_spi_er_driver);
-}
-module_init(nand_spi_er_init);
-
-/*
- * nand_spi_er_exit
- */
-static void __exit nand_spi_er_exit(void)
-{
- spi_unregister_driver(&nand_spi_er_driver);
-}
-module_exit(nand_spi_er_exit);
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Patrick Tjin");
-MODULE_DESCRIPTION("MTD nand_spi_er driver");
+++ /dev/null
-/*
- * drivers/mtd/devices/ubi32-m25p80.c
- * NOR flash driver, Ubicom processor internal SPI flash interface.
- *
- * This code instantiates the serial flash that contains the
- * original bootcode. The serial flash start at address 0x60000000
- * in both Ubicom32V3 and Ubicom32V4 ISAs.
- *
- * This piece of flash is made to appear as a Memory Technology
- * Device (MTD) with this driver to allow Read/Write/Erase operations.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-
-#include <asm/ip5000.h>
-#include <asm/devtree.h>
-
-#define UBICOM32_FLASH_BASE 0x60000000
-#define UBICOM32_FLASH_MAX_SIZE 0x01000000
-#define UBICOM32_FLASH_START 0x00000000
-#define UBICOM32_KERNEL_OFFSET 0x00010000 /* The kernel starts after Ubicom
- * .protect section. */
-
-static struct mtd_partition ubicom32_flash_partitions[] = {
- {
- .name = "Bootloader", /* Protected Section
- * Partition */
- .size = 0x10000,
- .offset = UBICOM32_FLASH_START,
-// .mask_flags = MTD_WRITEABLE /* Mark Read-only */
- },
- {
- .name = "Kernel", /* Kernel Partition. */
- .size = 0, /* this will be set up during
- * probe stage. At that time we
- * will know end of linux image
- * in flash. */
- .offset = MTDPART_OFS_APPEND, /* Starts right after Protected
- * section. */
-// .mask_flags = MTD_WRITEABLE /* Mark Read-only */
- },
- {
- .name = "Rest", /* Rest of the flash. */
- .size = 0x200000, /* Use up what remains in the
- * flash. */
- .offset = MTDPART_OFS_NXTBLK, /* Starts right after Protected
- * section. */
- }
-};
-
-static struct flash_platform_data ubicom32_flash_data = {
- .name = "ubicom32_boot_flash",
- .parts = ubicom32_flash_partitions,
- .nr_parts = ARRAY_SIZE(ubicom32_flash_partitions),
-};
-
-static struct resource ubicom32_flash_resource[] = {
- {
- .start = UBICOM32_FLASH_BASE,
- .end = UBICOM32_FLASH_BASE +
- UBICOM32_FLASH_MAX_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device ubicom32_flash_device = {
- .name = "ubicom32flashdriver",
- .id = 0, /* Bus number */
- .num_resources = ARRAY_SIZE(ubicom32_flash_resource),
- .resource = ubicom32_flash_resource,
- .dev = {
- .platform_data = &ubicom32_flash_data,
- },
-};
-
-static struct platform_device *ubicom32_flash_devices[] = {
- &ubicom32_flash_device,
-};
-
-static int __init ubicom32_flash_init(void)
-{
- printk(KERN_INFO "%s(): registering device resources\n",
- __FUNCTION__);
- platform_add_devices(ubicom32_flash_devices,
- ARRAY_SIZE(ubicom32_flash_devices));
- return 0;
-}
-
-arch_initcall(ubicom32_flash_init);
-
-/*
- * MTD SPI driver for ST M25Pxx (and similar) serial flash chips through
- * Ubicom32 SPI controller.
- *
- * Author: Mike Lavender, mike@steroidmicros.com
- *
- * Copyright (c) 2005, Intec Automation Inc.
- *
- * Some parts are based on lart.c by Abraham Van Der Merwe
- *
- * Cleaned up and generalized based on mtd_dataflash.c
- *
- * This code is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#define FLASH_PAGESIZE 256
-
-/* Flash opcodes. */
-#define OPCODE_WREN 0x06 /* Write enable */
-#define OPCODE_RDSR 0x05 /* Read status register */
-#define OPCODE_READ 0x03 /* Read data bytes (low frequency) */
-#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */
-#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */
-#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
-#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */
-#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */
-#define OPCODE_RDID 0x9f /* Read JEDEC ID */
-
-/* Status Register bits. */
-#define SR_WIP 1 /* Write in progress */
-#define SR_WEL 2 /* Write enable latch */
-/* meaning of other SR_* bits may differ between vendors */
-#define SR_BP0 4 /* Block protect 0 */
-#define SR_BP1 8 /* Block protect 1 */
-#define SR_BP2 0x10 /* Block protect 2 */
-#define SR_SRWD 0x80 /* SR write protect */
-
-/* Define max times to check status register before we give up. */
-#define MAX_READY_WAIT_COUNT 100000
-
-
-#ifdef CONFIG_MTD_PARTITIONS
-#define mtd_has_partitions() (1)
-#else
-#define mtd_has_partitions() (0)
-#endif
-
-/*
- * Ubicom32 FLASH Command Set
- */
-#define FLASH_FC_INST_CMD 0x00 /* for SPI command only transaction */
-#define FLASH_FC_INST_WR 0x01 /* for SPI write transaction */
-#define FLASH_FC_INST_RD 0x02 /* for SPI read transaction */
-
-#define ALIGN_DOWN(v, a) ((v) & ~((a) - 1))
-#define ALIGN_UP(v, a) (((v) + ((a) - 1)) & ~((a) - 1))
-
-#define FLASH_COMMAND_KICK_OFF(io) \
- asm volatile( \
- " bset "D(IO_INT_CLR)"(%0), #0, #%%bit("D(IO_XFL_INT_DONE)") \n\t" \
- " jmpt.t .+4 \n\t" \
- " bset "D(IO_INT_SET)"(%0), #0, #%%bit("D(IO_XFL_INT_START)") \n\t" \
- : \
- : "a" (io) \
- : "memory", "cc" \
- );
-
-#define FLASH_COMMAND_WAIT_FOR_COMPLETION(io) \
- asm volatile( \
- " btst "D(IO_INT_STATUS)"(%0), #%%bit("D(IO_XFL_INT_DONE)") \n\t" \
- " jmpeq.f .-4 \n\t" \
- : \
- : "a" (io) \
- : "memory", "cc" \
- );
-
-#define FLASH_COMMAND_EXEC(io) \
- FLASH_COMMAND_KICK_OFF(io) \
- FLASH_COMMAND_WAIT_FOR_COMPLETION(io)
-
-
-#define OSC1_FREQ 12000000
-#define TEN_MICRO_SECONDS (OSC1_FREQ * 10 / 1000000)
-
-/*
- * We will have to eventually replace this null definition with the real thing.
- */
-#define WATCHDOG_RESET()
-
-#define EXTFLASH_WRITE_FIFO_SIZE 32
-#define EXTFLASH_WRITE_BLOCK_SIZE EXTFLASH_WRITE_FIFO_SIZE /* limit the size to
- * FIFO capacity, so
- * the thread can be
- * suspended. */
-
-#define JFFS2_FILESYSTEM_SIZE 0x100000
-
-/****************************************************************************/
-
-struct m25p {
- struct platform_device *plt_dev;
- struct mutex lock;
- struct mtd_info mtd;
- unsigned partitioned:1;
- u8 erase_opcode;
- u8 command[4];
-};
-
-static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
-{
- return container_of(mtd, struct m25p, mtd);
-}
-
-/****************************************************************************/
-
-/*
- * Internal helper functions
- */
-
-/*
- * Read the status register, returning its value in the location
- * Return the status register value.
- * Returns negative if error occurred.
- */
-static int read_sr(struct m25p *flash)
-{
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
-
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) |
- IO_XFL_CTL1_FC_DATA(1);
- io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_RDSR);
- FLASH_COMMAND_EXEC(io);
-
- return io->status1 & 0xff;
-}
-
-/*
- * mem_flash_io_read_u32()
- */
-static u32 mem_flash_io_read_u32(u32 addr)
-{
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) |
- IO_XFL_CTL1_FC_DATA(4) | IO_XFL_CTL1_FC_DUMMY(1) |
- IO_XFL_CTL1_FC_ADDR;
- io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_FAST_READ) |
- IO_XFL_CTL2_FC_ADDR(addr);
- FLASH_COMMAND_EXEC(io);
- return io->status1;
-}
-
-/*
- * mem_flash_read_u8()
- */
-static u8 mem_flash_read_u8(u32 addr)
-{
- u32 tmp_addr = ALIGN_DOWN(addr, 4);
- u32 tmp_data = mem_flash_io_read_u32(tmp_addr);
- u8 *ptr = (u8 *)&tmp_data;
- return ptr[addr & 0x3];
-}
-
-/*
- * mem_flash_read()
- * No need to lock as read is implemented with ireads (same as normal flash
- * execution).
- */
-static void mem_flash_read(u32 addr, void *dst, size_t length)
-{
- /*
- * Range check
- */
- /*
- * Fix source alignment.
- */
- while (addr & 0x03) {
- if (length == 0) {
- return;
- }
- *((u8 *)dst) = mem_flash_read_u8(addr++);
- dst++;
- length--;
- }
-
- while (length >= 4) {
- u32 tmp_data = mem_flash_io_read_u32(addr);
- addr += 4;
- length -= 4;
-
- /*
- * Send the data to the destination.
- */
- memcpy((void *)dst, (void *)&tmp_data, 4);
- dst += 4;
- }
-
- while (length--) {
- *((u8 *)dst) = mem_flash_read_u8(addr++);
- dst++;
- }
-}
-
-/*
- * mem_flash_wait_until_complete()
- */
-static void mem_flash_wait_until_complete(void)
-{
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
-
- do {
- /*
- * Put a delay here to deal with flash programming problem.
- */
- u32 mptval = UBICOM32_IO_TIMER->mptval + TEN_MICRO_SECONDS;
- while (UBICOM32_IO_TIMER->mptval < mptval)
- ;
-
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) |
- IO_XFL_CTL1_FC_DATA(1);
- io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_RDSR);
- FLASH_COMMAND_EXEC(io);
- } while (io->status1 & SR_WIP);
-}
-
-/*
- * mem_flash_write_next()
- */
-static size_t mem_flash_write_next(u32 addr, u8 *buf, size_t length)
-{
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
- u32 data_start = addr;
- u32 data_end = addr + length;
- size_t count;
- u32 i, j;
-
- /*
- * Top limit address.
- */
- u32 block_start = ALIGN_DOWN(data_start, 4);
- u32 block_end = block_start + EXTFLASH_WRITE_BLOCK_SIZE;
-
- union {
- u8 byte[EXTFLASH_WRITE_BLOCK_SIZE];
- u32 word[EXTFLASH_WRITE_BLOCK_SIZE / 4];
- } write_buf;
-
- u32 *flash_addr = (u32 *)block_start;
-
- /*
- * The write block must be limited by FLASH internal buffer.
- */
- u32 block_end_align = ALIGN_DOWN(block_end, 256);
- bool write_needed;
-
- block_end = (block_end_align > block_start)
- ? block_end_align : block_end;
- data_end = (data_end <= block_end) ? data_end : block_end;
- block_end = ALIGN_UP(data_end, 4);
- count = data_end - data_start;
-
- /*
- * Transfer data to a buffer.
- */
- for (i = 0; i < (block_end - block_start) / 4; i++) {
- /*
- * The FLASH read can hold D-cache for a long time.
- * Use I/O operation to read FLASH to avoid starving other
- * threads, especially HRT. (Do this for application only)
- */
- write_buf.word[i] = mem_flash_io_read_u32(
- (u32)(&flash_addr[i]));
- }
-
- write_needed = false;
- for (i = 0, j = (data_start - block_start);
- i < (data_end - data_start); i++, j++) {
- write_needed = write_needed || (write_buf.byte[j] != buf[i]);
- write_buf.byte[j] &= buf[i];
- }
-
-
- /*
- * If the data in FLASH is identical to what to be written. Then skip
- * it.
- */
- if (write_needed) {
- /*
- * Write to flash.
- */
- void *tmp __attribute__((unused));
- s32 extra_words;
-
- asm volatile(
- " move.4 %0, %2 \n\t"
- " bset "D(IO_INT_SET)"(%1), #0, #%%bit("D(IO_PORTX_INT_FIFO_TX_RESET)") \n\t"
- " pipe_flush 0 \n\t"
- " .rept "D(EXTFLASH_WRITE_FIFO_SIZE / 4)" \n\t"
- " move.4 "D(IO_TX_FIFO)"(%1), (%0)4++ \n\t"
- " .endr \n\t"
- : "=&a" (tmp)
- : "a" (io), "r" (&write_buf.word[0])
- : "memory", "cc"
- );
-
- /* Lock FLASH for write access. */
- io->ctl0 |= IO_XFL_CTL0_MCB_LOCK;
-
- /* Command: WREN */
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD);
- io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_WREN);
- FLASH_COMMAND_EXEC(io);
-
- /* Command: BYTE PROGRAM */
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_WR) |
- IO_XFL_CTL1_FC_DATA(block_end - block_start) |
- IO_XFL_CTL1_FC_ADDR;
- io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_PP) |
- IO_XFL_CTL2_FC_ADDR(block_start);
- FLASH_COMMAND_KICK_OFF(io);
-
- extra_words = (s32)(block_end - block_start -
- EXTFLASH_WRITE_FIFO_SIZE) / 4;
- if (extra_words > 0) {
- asm volatile(
- " move.4 %0, %3 \n\t"
- "1: cmpi "D(IO_FIFO_LEVEL)"(%1), #4 \n\t"
- " jmpgt.s.t 1b \n\t"
- " move.4 "D(IO_TX_FIFO)"(%1), (%0)4++ \n\t"
- " add.4 %2, #-1, %2 \n\t"
- " jmpgt.t 1b \n\t"
- : "=&a" (tmp)
- : "a" (io), "d" (extra_words),
- "r" (&write_buf.word[EXTFLASH_WRITE_FIFO_SIZE / 4])
- : "memory", "cc"
- );
- }
- FLASH_COMMAND_WAIT_FOR_COMPLETION(io);
-
- mem_flash_wait_until_complete();
-
-
- /* Unlock FLASH for cache access. */
- io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK;
- }
-
- /*
- * Complete.
- */
- return count;
-}
-
-/*
- * mem_flash_write()
- */
-static void mem_flash_write(u32 addr, const void *src, size_t length)
-{
- /*
- * Write data
- */
- u8_t *ptr = (u8_t *)src;
- while (length) {
- size_t count = mem_flash_write_next(addr, ptr, length);
- addr += count;
- ptr += count;
- length -= count;
- }
-}
-
-/*
- * Service routine to read status register until ready, or timeout occurs.
- * Returns non-zero if error.
- */
-static int wait_till_ready(struct m25p *flash)
-{
- int count;
- int sr;
-
- /* one chip guarantees max 5 msec wait here after page writes,
- * but potentially three seconds (!) after page erase.
- */
- for (count = 0; count < MAX_READY_WAIT_COUNT; count++) {
- u32 mptval;
- sr = read_sr(flash);
- if (sr < 0)
- break;
- else if (!(sr & SR_WIP))
- return 0;
-
- /*
- * Put a 10us delay here to deal with flash programming problem.
- */
- mptval = UBICOM32_IO_TIMER->mptval + TEN_MICRO_SECONDS;
- while ((s32)(mptval - UBICOM32_IO_TIMER->mptval) > 0) {
- WATCHDOG_RESET();
- }
- /* REVISIT sometimes sleeping would be best */
- }
-
- return 1;
-}
-
-/*
- * mem_flash_erase_page()
- */
-static void mem_flash_erase_page(u32 addr)
-{
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
-
- /* Lock FLASH for write access. */
- io->ctl0 |= IO_XFL_CTL0_MCB_LOCK;
-
- /* Command: WREN */
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD);
- io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_WREN);
- FLASH_COMMAND_EXEC(io);
-
- /* Command: ERASE */
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD) |
- IO_XFL_CTL1_FC_ADDR;
- io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_SE) |
- IO_XFL_CTL2_FC_ADDR(addr);
- FLASH_COMMAND_EXEC(io);
-
- mem_flash_wait_until_complete();
-
- /* Unlock FLASH for cache access. */
- io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK;
-}
-
-/*
- * mem_flash_erase()
- */
-static u32 mem_flash_erase(u32 addr, u32 length)
-{
- /*
- * Calculate the endaddress to be the first address of the page
- * just beyond this erase section of pages.
- */
- u32 endaddr = addr + length;
-
- /*
- * Erase.
- */
- while (addr < endaddr) {
- u32 test_addr = addr;
- mem_flash_erase_page(addr);
-
- /*
- * Test how much was erased as actual flash page at this address
- * may be smaller than the expected page size.
- */
- while (test_addr < endaddr) {
- /*
- * The FLASH read can hold D-cache for a long time. Use
- * I/O operation to read FLASH to avoid starving other
- * threads, especially HRT. (Do this for application
- * only)
- */
- if (mem_flash_io_read_u32(test_addr) != 0xFFFFFFFF) {
- break;
- }
- test_addr += 4;
- }
- if (test_addr == addr) {
- printk("erase failed at address 0x%x, skipping",
- test_addr);
- test_addr += 4;
- return 1;
- }
- addr = test_addr;
- }
- return 0;
-}
-
-
-/****************************************************************************/
-
-/*
- * MTD implementation
- */
-
-/*
- * Erase an address range on the flash chip. The address range may extend
- * one or more erase sectors. Return an error is there is a problem erasing.
- */
-static int ubicom32_flash_driver_erase(struct mtd_info *mtd,
- struct erase_info *instr)
-{
- struct m25p *flash = mtd_to_m25p(mtd);
- u32 addr, len;
-
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %lld\n",
- dev_name(&flash->plt_dev->dev), __FUNCTION__, "at",
- (u32)instr->addr, instr->len);
-
- /* sanity checks */
- if (instr->addr + instr->len > flash->mtd.size)
- return -EINVAL;
- if ((instr->addr % mtd->erasesize) != 0
- || (instr->len % mtd->erasesize) != 0) {
- return -EINVAL;
- }
-
- addr = instr->addr + UBICOM32_FLASH_BASE;
- len = instr->len;
-
- mutex_lock(&flash->lock);
-
- /* REVISIT in some cases we could speed up erasing large regions
- * by using OPCODE_SE instead of OPCODE_BE_4K
- */
-
- /* now erase those sectors */
- if (mem_flash_erase(addr, len)) {
- instr->state = MTD_ERASE_FAILED;
- mutex_unlock(&flash->lock);
- return -EIO;
- }
-
- mutex_unlock(&flash->lock);
- instr->state = MTD_ERASE_DONE;
- mtd_erase_callback(instr);
- return 0;
-}
-
-/*
- * Read an address range from the flash chip. The address range
- * may be any size provided it is within the physical boundaries.
- */
-static int ubicom32_flash_driver_read(struct mtd_info *mtd, loff_t from,
- size_t len, size_t *retlen, u_char *buf)
-{
- struct m25p *flash = mtd_to_m25p(mtd);
- u32 base_addr = UBICOM32_FLASH_BASE + from;
-
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %d\n",
- dev_name(&flash->plt_dev->dev), __FUNCTION__, "from",
- (u32)from, len);
-
- /* sanity checks */
- if (!len)
- return 0;
-
- if (from + len > flash->mtd.size)
- return -EINVAL;
-
- /* Byte count starts at zero. */
- if (retlen)
- *retlen = 0;
-
- mutex_lock(&flash->lock);
-
- /* Wait till previous write/erase is done. */
- if (wait_till_ready(flash)) {
- /* REVISIT status return?? */
- mutex_unlock(&flash->lock);
- return 1;
- }
-
- mem_flash_read(base_addr, (void *)buf, len);
-
- if (retlen)
- *retlen = len;
-
- mutex_unlock(&flash->lock);
-
- return 0;
-}
-
-/*
- * Write an address range to the flash chip. Data must be written in
- * FLASH_PAGESIZE chunks. The address range may be any size provided
- * it is within the physical boundaries.
- */
-static int ubicom32_flash_driver_write(struct mtd_info *mtd, loff_t to,
- size_t len, size_t *retlen,
- const u_char *buf)
-{
- struct m25p *flash = mtd_to_m25p(mtd);
- u32 base_addr = UBICOM32_FLASH_BASE + to;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %d\n",
- dev_name(&flash->plt_dev->dev), __FUNCTION__, "to",
- (u32)to, len);
-
- if (retlen)
- *retlen = 0;
-
- /* sanity checks */
- if (!len)
- return 0;
-
- if (to + len > flash->mtd.size)
- return -EINVAL;
-
- mutex_lock(&flash->lock);
-
- mem_flash_write(base_addr, (void *) buf, len);
-
- /* Wait until finished previous write command. */
- if (wait_till_ready(flash)) {
- mutex_unlock(&flash->lock);
- return 1;
- }
-
- if (retlen)
- *retlen = len;
-
- mutex_unlock(&flash->lock);
- return 0;
-}
-
-
-/****************************************************************************/
-
-/*
- * SPI device driver setup and teardown
- */
-
-struct flash_info {
- char *name;
-
- /* JEDEC id zero means "no ID" (most older chips); otherwise it has
- * a high byte of zero plus three data bytes: the manufacturer id,
- * then a two byte device id.
- */
- u32 jedec_id;
-
- /* The size listed here is what works with OPCODE_SE, which isn't
- * necessarily called a "sector" by the vendor.
- */
- unsigned sector_size;
- u16 n_sectors;
-
- u16 flags;
-#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */
-};
-
-
-/* NOTE: double check command sets and memory organization when you add
- * more flash chips. This current list focusses on newer chips, which
- * have been converging on command sets which including JEDEC ID.
- */
-static struct flash_info __devinitdata m25p_data[] = {
-
- /* Atmel -- some are (confusingly) marketed as "DataFlash" */
- { "at25fs010", 0x1f6601, 32 * 1024, 4, SECT_4K, },
- { "at25fs040", 0x1f6604, 64 * 1024, 8, SECT_4K, },
-
- { "at25df041a", 0x1f4401, 64 * 1024, 8, SECT_4K, },
-
- { "at26f004", 0x1f0400, 64 * 1024, 8, SECT_4K, },
- { "at26df081a", 0x1f4501, 64 * 1024, 16, SECT_4K, },
- { "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
- { "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, },
-
- /* Spansion -- single (large) sector size only, at least
- * for the chips listed here (without boot sectors).
- */
- { "s25sl004a", 0x010212, 64 * 1024, 8, },
- { "s25sl008a", 0x010213, 64 * 1024, 16, },
- { "s25sl016a", 0x010214, 64 * 1024, 32, },
- { "s25sl032a", 0x010215, 64 * 1024, 64, },
- { "s25sl064a", 0x010216, 64 * 1024, 128, },
-
- /* SST -- large erase sizes are "overlays", "sectors" are 4K */
- { "sst25vf040b", 0xbf258d, 64 * 1024, 8, SECT_4K, },
- { "sst25vf080b", 0xbf258e, 64 * 1024, 16, SECT_4K, },
- { "sst25vf016b", 0xbf2541, 64 * 1024, 32, SECT_4K, },
- { "sst25vf032b", 0xbf254a, 64 * 1024, 64, SECT_4K, },
-
- /* ST Microelectronics -- newer production may have feature updates */
- { "m25p05", 0x202010, 32 * 1024, 2, },
- { "m25p10", 0x202011, 32 * 1024, 4, },
- { "m25p20", 0x202012, 64 * 1024, 4, },
- { "m25p40", 0x202013, 64 * 1024, 8, },
- { "m25p80", 0, 64 * 1024, 16, },
- { "m25p16", 0x202015, 64 * 1024, 32, },
- { "m25p32", 0x202016, 64 * 1024, 64, },
- { "m25p64", 0x202017, 64 * 1024, 128, },
- { "m25p128", 0x202018, 256 * 1024, 64, },
-
- { "m45pe80", 0x204014, 64 * 1024, 16, },
- { "m45pe16", 0x204015, 64 * 1024, 32, },
-
- { "m25pe80", 0x208014, 64 * 1024, 16, },
- { "m25pe16", 0x208015, 64 * 1024, 32, SECT_4K, },
-
- /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
- { "w25x10", 0xef3011, 64 * 1024, 2, SECT_4K, },
- { "w25x20", 0xef3012, 64 * 1024, 4, SECT_4K, },
- { "w25x40", 0xef3013, 64 * 1024, 8, SECT_4K, },
- { "w25x80", 0xef3014, 64 * 1024, 16, SECT_4K, },
- { "w25x16", 0xef3015, 64 * 1024, 32, SECT_4K, },
- { "w25x32", 0xef3016, 64 * 1024, 64, SECT_4K, },
- { "w25x64", 0xef3017, 64 * 1024, 128, SECT_4K, },
-
- /* Macronix -- mx25lxxx */
- { "mx25l32", 0xc22016, 64 * 1024, 64, },
- { "mx25l64", 0xc22017, 64 * 1024, 128, },
- { "mx25l128", 0xc22018, 64 * 1024, 256, },
-
-};
-
-struct flash_info *__devinit jedec_probe(struct platform_device *spi)
-{
- int tmp;
- u32 jedec;
- struct flash_info *info;
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
-
- /*
- * Setup and run RDID command on the flash.
- */
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) |
- IO_XFL_CTL1_FC_DATA(3);
- io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_RDID);
- FLASH_COMMAND_EXEC(io);
-
- jedec = io->status1 & 0x00ffffff;
-
- for (tmp = 0, info = m25p_data;
- tmp < ARRAY_SIZE(m25p_data);
- tmp++, info++) {
- if (info->jedec_id == jedec)
- return info;
- }
- dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
- return NULL;
-}
-
-
-/*
- * board specific setup should have ensured the SPI clock used here
- * matches what the READ command supports, at least until this driver
- * understands FAST_READ (for clocks over 25 MHz).
- */
-static int __devinit ubicom32_flash_probe(struct platform_device *spi)
-{
- struct flash_platform_data *data;
- struct m25p *flash;
- struct flash_info *info;
- unsigned i;
-
- /* Platform data helps sort out which chip type we have, as
- * well as how this board partitions it. If we don't have
- * a chip ID, try the JEDEC id commands; they'll work for most
- * newer chips, even if we don't recognize the particular chip.
- */
- data = spi->dev.platform_data;
- if (data && data->type) {
- for (i = 0, info = m25p_data;
- i < ARRAY_SIZE(m25p_data);
- i++, info++) {
- if (strcmp(data->type, info->name) == 0)
- break;
- }
-
- /* unrecognized chip? */
- if (i == ARRAY_SIZE(m25p_data)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: unrecognized id %s\n",
- dev_name(&spi->dev), data->type);
- info = NULL;
-
- /* recognized; is that chip really what's there? */
- } else if (info->jedec_id) {
- struct flash_info *chip = jedec_probe(spi);
-
- if (!chip || chip != info) {
- dev_warn(&spi->dev, "found %s, expected %s\n",
- chip ? chip->name : "UNKNOWN",
- info->name);
- info = NULL;
- }
- }
- } else
- info = jedec_probe(spi);
-
- if (!info)
- return -ENODEV;
-
- flash = kzalloc(sizeof *flash, GFP_KERNEL);
- if (!flash)
- return -ENOMEM;
-
- flash->plt_dev = spi;
- mutex_init(&flash->lock);
- dev_set_drvdata(&spi->dev, flash);
-
- if (data && data->name)
- flash->mtd.name = data->name;
- else
- flash->mtd.name = dev_name(&spi->dev);
-
- flash->mtd.type = MTD_NORFLASH;
- flash->mtd.writesize = 1;
- flash->mtd.flags = MTD_CAP_NORFLASH;
- flash->mtd.size = info->sector_size * info->n_sectors;
- flash->mtd.erase = ubicom32_flash_driver_erase;
- flash->mtd.read = ubicom32_flash_driver_read;
- flash->mtd.write = ubicom32_flash_driver_write;
-
- /* prefer "small sector" erase if possible */
- /*
- * The Ubicom erase code does not use the opcode for smaller sectors,
- * so disable that functionality and keep erasesize == sector_size
- * so that the test in ubicom32_flash_driver_erase works properly.
- *
- * This was: `if (info->flags & SECT_4K) {' instead of `if (0) {'
- */
- if (0) {
- flash->erase_opcode = OPCODE_BE_4K;
- flash->mtd.erasesize = 4096;
- } else {
- flash->erase_opcode = OPCODE_SE;
- flash->mtd.erasesize = info->sector_size;
- }
-
- dev_info(&spi->dev, "%s (%lld Kbytes)\n", info->name,
- flash->mtd.size / 1024);
-
- DEBUG(MTD_DEBUG_LEVEL2,
- "mtd .name = %s, .size = 0x%.8llx (%lluMiB) "
- ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
- flash->mtd.name,
- flash->mtd.size, flash->mtd.size / (1024*1024),
- flash->mtd.erasesize, flash->mtd.erasesize / 1024,
- flash->mtd.numeraseregions);
-
- if (flash->mtd.numeraseregions)
- for (i = 0; i < flash->mtd.numeraseregions; i++)
- DEBUG(MTD_DEBUG_LEVEL2,
- "mtd.eraseregions[%d] = { .offset = 0x%.8llx, "
- ".erasesize = 0x%.8x (%uKiB), "
- ".numblocks = %d }\n",
- i, flash->mtd.eraseregions[i].offset,
- flash->mtd.eraseregions[i].erasesize,
- flash->mtd.eraseregions[i].erasesize / 1024,
- flash->mtd.eraseregions[i].numblocks);
-
-
- /* partitions should match sector boundaries; and it may be good to
- * use readonly partitions for writeprotected sectors (BP2..BP0).
- */
- if (mtd_has_partitions()) {
- struct mtd_partition *parts = NULL;
- int nr_parts = 0;
-
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- static const char *part_probes[] = { "cmdlinepart", NULL, };
-
- nr_parts = parse_mtd_partitions(&flash->mtd,
- part_probes, &parts, 0);
-#endif
-
- if (nr_parts <= 0 && data && data->parts) {
- parts = data->parts;
- nr_parts = data->nr_parts;
- if (nr_parts >= 2) {
- /*
- * Set last partition size to be 1M.
- */
- parts[1].size = flash->mtd.size -
- parts[0].size - JFFS2_FILESYSTEM_SIZE;
- parts[2].size = JFFS2_FILESYSTEM_SIZE;
- }
- }
-
- if (nr_parts > 0) {
- for (i = 0; i < nr_parts; i++) {
- DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
- "{.name = %s, .offset = 0x%.8llx, "
- ".size = 0x%.8llx (%lluKiB) }\n",
- i, parts[i].name,
- parts[i].offset,
- parts[i].size,
- parts[i].size / 1024);
- }
- flash->partitioned = 1;
- return add_mtd_partitions(&flash->mtd, parts, nr_parts);
- }
- } else if (data->nr_parts)
- dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
- data->nr_parts, data->name);
-
- return add_mtd_device(&flash->mtd) == 1 ? -ENODEV : 0;
-}
-
-
-static int __devexit ubicom32_flash_remove(struct spi_device *spi)
-{
- struct m25p *flash = dev_get_drvdata(&spi->dev);
- int status;
-
- /* Clean up MTD stuff. */
- if (mtd_has_partitions() && flash->partitioned)
- status = del_mtd_partitions(&flash->mtd);
- else
- status = del_mtd_device(&flash->mtd);
- if (status == 0)
- kfree(flash);
- return 0;
-}
-
-static struct platform_driver ubicom32_flash_driver = {
- .driver = {
- .name = "ubicom32flashdriver",
- .bus = &platform_bus_type,
- .owner = THIS_MODULE,
- },
- .probe = ubicom32_flash_probe,
- .remove = NULL,
-};
-
-static int ubicom32_flash_driver_init(void)
-{
- return platform_driver_register(&ubicom32_flash_driver);
-}
-
-
-static void ubicom32_flash_driver_exit(void)
-{
- platform_driver_unregister(&ubicom32_flash_driver);
-}
-
-
-module_init(ubicom32_flash_driver_init);
-module_exit(ubicom32_flash_driver_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mike Lavender");
-MODULE_DESCRIPTION("Ubicom32 MTD SPI driver for ST M25Pxx flash chips");
+++ /dev/null
-/*
- * Micron SPI-ER NAND Flash Memory
- * This code uses the built in Ubicom flash controller
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
-*/
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/err.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#define DRIVER_NAME "ubi32-nand-spi-er"
-#define UBI32_NAND_SPI_ER_BLOCK_FROM_ROW(row) (row >> 6)
-
-#define UBI32_NAND_SPI_ER_STATUS_P_FAIL (1 << 3)
-#define UBI32_NAND_SPI_ER_STATUS_E_FAIL (1 << 2)
-#define UBI32_NAND_SPI_ER_STATUS_OIP (1 << 0)
-
-#define UBI32_NAND_SPI_ER_LAST_ROW_INVALID 0xFFFFFFFF
-#define UBI32_NAND_SPI_ER_BAD_BLOCK_MARK_OFFSET 0x08
-
-struct ubi32_nand_spi_er_device {
- const char *name;
-
- uint16_t id;
-
- unsigned int blocks;
- unsigned int pages_per_block;
- unsigned int page_size;
- unsigned int write_size;
- unsigned int erase_size;
-};
-
-struct ubi32_nand_spi_er {
- char name[24];
-
- const struct ubi32_nand_spi_er_device *device;
-
- struct mutex lock;
- struct platform_device *pdev;
-
- struct mtd_info mtd;
-
- unsigned int last_row; /* the last row we fetched */
-
- /*
- * Bad block table (MUST be last in strcuture)
- */
- unsigned long nbb;
- unsigned long bbt[0];
-};
-
-/*
- * Chip supports a write_size of 512, but we cannot do partial
- * page with command 0x84.
- *
- * We need to use command 0x84 because we cannot fill the FIFO fast
- * enough to transfer the whole 512 bytes at a time. (maybe through
- * OCM?)
- */
-const struct ubi32_nand_spi_er_device ubi32_nand_spi_er_devices[] = {
- {
- name: "MT29F1G01ZDC",
- id: 0x2C12,
- blocks: 1024,
- pages_per_block: 64,
- page_size: 2048,
- write_size: 2048,
- erase_size: 64 * 2048,
- },
- {
- name: "MT29F1G01ZDC",
- id: 0x2C13,
- blocks: 1024,
- pages_per_block: 64,
- page_size: 2048,
- write_size: 2048,
- erase_size: 64 * 2048,
- },
-};
-
-static int read_only = 0;
-module_param(read_only, int, 0);
-MODULE_PARM_DESC(read_only, "Leave device locked");
-
-/*
- * Ubicom32 FLASH Command Set
- */
-#define FLASH_PORT RA
-
-#define FLASH_FC_INST_CMD 0x00 /* for SPI command only transaction */
-#define FLASH_FC_INST_WR 0x01 /* for SPI write transaction */
-#define FLASH_FC_INST_RD 0x02 /* for SPI read transaction */
-
-#define FLASH_COMMAND_KICK_OFF(io) \
- asm volatile( \
- " bset "D(IO_INT_CLR)"(%0), #0, #%%bit("D(IO_XFL_INT_DONE)") \n\t" \
- " jmpt.t .+4 \n\t" \
- " bset "D(IO_INT_SET)"(%0), #0, #%%bit("D(IO_XFL_INT_START)") \n\t" \
- : \
- : "a" (io) \
- : "cc" \
- );
-
-#define FLASH_COMMAND_WAIT_FOR_COMPLETION(io) \
- asm volatile( \
- " btst "D(IO_INT_STATUS)"(%0), #%%bit("D(IO_XFL_INT_DONE)") \n\t" \
- " jmpeq.f .-4 \n\t" \
- : \
- : "a" (io) \
- : "cc" \
- );
-
-#define FLASH_COMMAND_EXEC(io) \
- FLASH_COMMAND_KICK_OFF(io) \
- FLASH_COMMAND_WAIT_FOR_COMPLETION(io)
-
-/*
- * ubi32_nand_spi_er_get_feature
- * Get Feature register
- */
-static uint8_t ubi32_nand_spi_er_get_feature(uint32_t reg)
-{
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-
- /*
- * Note that this will produce the sequence:
- * SI [0F][REG][00][00]
- * SO ---------[SR][SR][SR]
- * Since the flash controller can only output 24 bits of address, this is
- * ok for this command since the data will just repeat as long as the CS
- * is asserted and the clock is running.
- */
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) | IO_XFL_CTL1_FC_DATA(1) |
- IO_XFL_CTL1_FC_ADDR;
- io->ctl2 = IO_XFL_CTL2_FC_CMD(0x0F) | IO_XFL_CTL2_FC_ADDR(reg << 16);
- FLASH_COMMAND_EXEC(io);
-
- return io->status1 & 0xFF;
-}
-
-/*
- * ubi32_nand_spi_er_write_buf
- * writes a buffer to the bus
- *
- * Writes 511 + 1 bytes to the bus, we have to stuff one data byte into the address.
- */
-static void ubi32_nand_spi_er_write_buf(const uint8_t *buf, uint32_t col)
-{
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
- uint32_t tmp;
-
- asm volatile (
- " bset "D(IO_INT_SET)"(%[port]), #0, #%%bit("D(IO_PORTX_INT_FIFO_TX_RESET)") \n\t"
- " pipe_flush 0 \n\t"
- :
- : [port] "a" (FLASH_PORT)
- : "cc"
- );
-
- /*
- * Write the data into the cache
- */
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
-#ifdef SUPPORT_512_FIFO
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_WR) | IO_XFL_CTL1_FC_DATA(511) |
-#endif
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_WR) | IO_XFL_CTL1_FC_DATA(31) |
- IO_XFL_CTL1_FC_ADDR;
-
- /*
- * Construct the address with the first byte of data
- */
- tmp = (col << 8) | *buf++;
- io->ctl2 = IO_XFL_CTL2_FC_CMD(0x84) | IO_XFL_CTL2_FC_ADDR(tmp);
-
- asm volatile (
-
- /*
- * Move 32 bytes
- *
- * The first word needs to be [11][22][33][33] to work around a flash
- * controller bug.
- */
- " move.2 %[tmp], (%[data])2++ \n\t"
- " shmrg.1 %[tmp], (%[data]), %[tmp] \n\t"
- " shmrg.1 %[tmp], (%[data])1++, %[tmp] \n\t"
- " move.4 "D(IO_TX_FIFO)"(%[port]), %[tmp] \n\t"
-
- /*
- * We're aligned again!
- */
- " .rept 7 \n\t"
- " move.4 "D(IO_TX_FIFO)"(%[port]), (%[data])4++ \n\t"
- " .endr \n\t"
-
- /*
- * Kick off the flash command
- */
- " bset "D(IO_INT_CLR)"(%[port]), #0, #%%bit("D(IO_XFL_INT_DONE)") \n\t"
- " jmpt.t .+4 \n\t"
- " bset "D(IO_INT_SET)"(%[port]), #0, #%%bit("D(IO_XFL_INT_START)") \n\t"
-
-#ifdef SUPPORT_512_FIFO
- /*
- * Fill the remaining 120 words as space becomes available
- */
- "1: \n\t"
- " cmpi "D(IO_FIFO_LEVEL)"(%[port]), #4 \n\t"
- " jmpgt.s.t 1b \n\t"
- " move.4 "D(IO_TX_FIFO)"(%[port]), (%[data])4++ \n\t"
- " move.4 "D(IO_TX_FIFO)"(%[port]), (%[data])4++ \n\t"
- " move.4 "D(IO_TX_FIFO)"(%[port]), (%[data])4++ \n\t"
- " move.4 "D(IO_TX_FIFO)"(%[port]), (%[data])4++ \n\t"
- " add.4 %[cnt], #-4, %[cnt] \n\t"
- " jmpgt.t 1b \n\t"
-#endif
- /*
- * Wait for the transaction to finish
- */
- " btst "D(IO_INT_STATUS)"(%[port]), #%%bit("D(IO_XFL_INT_DONE)") \n\t"
- " jmpeq.f .-4 \n\t"
-
- : [tmp] "=&d" (tmp),
- [data] "+&a" (buf)
- : [column] "d" (col),
- [port] "a" (FLASH_PORT),
- [cnt] "d" (120) // see above comment
- : "cc"
- );
-}
-
-/*
- * ubi32_nand_spi_er_send_rd_addr
- * perform FC_RD: CMD + address
- */
-static void ubi32_nand_spi_er_send_rd_addr(uint8_t command, uint32_t address)
-{
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) | IO_XFL_CTL1_FC_DATA(4) |
- IO_XFL_CTL1_FC_ADDR;
- io->ctl2 = IO_XFL_CTL2_FC_CMD(command) | IO_XFL_CTL2_FC_ADDR(address);
- FLASH_COMMAND_EXEC(io);
-}
-
-/*
- * ubi32_nand_spi_er_send_cmd_addr
- * perform FC_(xxx): CMD + address
- */
-static void ubi32_nand_spi_er_send_cmd_addr(uint8_t command, uint32_t address)
-{
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD) | IO_XFL_CTL1_FC_ADDR;
- io->ctl2 = IO_XFL_CTL2_FC_CMD(command) | IO_XFL_CTL2_FC_ADDR(address);
- FLASH_COMMAND_EXEC(io);
-}
-
-/*
- * ubi32_nand_spi_er_write_disable
- * clear the write enable bit
- */
-static void ubi32_nand_spi_er_write_disable(void)
-{
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD);
- io->ctl2 = IO_XFL_CTL2_FC_CMD(0x04);
- FLASH_COMMAND_EXEC(io);
-}
-
-/*
- * ubi32_nand_spi_er_write_enable
- * set the write enable bit
- */
-static void ubi32_nand_spi_er_write_enable(void)
-{
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD);
- io->ctl2 = IO_XFL_CTL2_FC_CMD(0x06);
- FLASH_COMMAND_EXEC(io);
-}
-
-/*
- * ubi32_nand_spi_er_busywait
- * Wait until the chip is not busy
- */
-static uint8_t ubi32_nand_spi_er_busywait(void)
-{
- int i;
- uint8_t data;
-
- /*
- * tRD is 100us, so don't delay too long, however, tERS is
- * 10ms so you'd better loop enough.
- */
- for (i = 0; i < 200; i++) {
- data = ubi32_nand_spi_er_get_feature(0xC0);
- if (!(data & UBI32_NAND_SPI_ER_STATUS_OIP)) {
- break;
- }
-
- udelay(50);
- }
-
- return data;
-}
-
-/*
- * ubi32_nand_spi_er_erase
- * Erase a block, parameters must be block aligned
- */
-static int ubi32_nand_spi_er_erase(struct mtd_info *mtd, struct erase_info *instr)
-{
- struct ubi32_nand_spi_er *chip = mtd->priv;
- int res;
-
- DEBUG(MTD_DEBUG_LEVEL3, "%s: erase addr:%x len:%x\n", chip->name, instr->addr, instr->len);
-
- if ((instr->addr + instr->len) > mtd->size) {
- return -EINVAL;
- }
-
- if (instr->addr & (chip->device->erase_size - 1)) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: erase address is not aligned %x\n", chip->name, instr->addr);
- return -EINVAL;
- }
-
- if (instr->len & (chip->device->erase_size - 1)) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: erase len is not aligned %x\n", chip->name, instr->len);
- return -EINVAL;
- }
-
- mutex_lock(&chip->lock);
- chip->last_row = UBI32_NAND_SPI_ER_LAST_ROW_INVALID;
-
- while (instr->len) {
- uint32_t block = instr->addr >> 17;
- uint32_t row = block << 6;
- uint8_t stat;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: block erase row:%x block:%x addr:%x rem:%x\n", chip->name, row, block, instr->addr, instr->len);
-
- /*
- * Test for bad block
- */
- if (test_bit(block, chip->bbt)) {
- instr->fail_addr = block << 17;
- instr->state = MTD_ERASE_FAILED;
- res = -EBADMSG;
- goto done;
- }
-
- ubi32_nand_spi_er_write_enable();
-
- /*
- * Block erase
- */
- ubi32_nand_spi_er_send_cmd_addr(0xD8, row);
-
- /*
- * Wait
- */
- stat = ubi32_nand_spi_er_busywait();
- if (stat & UBI32_NAND_SPI_ER_STATUS_OIP) {
- instr->fail_addr = block << 17;
- instr->state = MTD_ERASE_FAILED;
- DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive stat=%02x\n", chip->name, stat);
-
- /*
- * Chip is stuck?
- */
- res = -EIO;
- goto done;
- }
-
- /*
- * Check the status register
- */
- if (stat & UBI32_NAND_SPI_ER_STATUS_E_FAIL) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: E_FAIL signalled (%02x)\n", chip->name, stat);
- instr->fail_addr = block << 17;
- instr->state = MTD_ERASE_FAILED;
- goto done;
- }
-
- /*
- * Next
- */
- block++;
- instr->len -= chip->device->erase_size;
- instr->addr += chip->device->erase_size;
- }
-
- instr->state = MTD_ERASE_DONE;
-
- mutex_unlock(&chip->lock);
- return 0;
-
-done:
- ubi32_nand_spi_er_write_disable();
-
- mutex_unlock(&chip->lock);
-
- mtd_erase_callback(instr);
- return 0;
-}
-
-/*
- * ubi32_nand_spi_er_read
- *
- * return -EUCLEAN: ecc error recovered
- * return -EBADMSG: ecc error not recovered
-*/
-static int ubi32_nand_spi_er_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
-{
- struct ubi32_nand_spi_er *chip = mtd->priv;
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-
- uint32_t row;
- uint32_t column;
- int retval = 0;
- uint32_t *pbuf = (uint32_t *)buf;
-
- *retlen = 0;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: read block from %llx len %d into %p\n", chip->name, from, len, buf);
-
- /*
- * buf should be aligned
- */
- if ((uint32_t)buf & 0x03) {
- return -EINVAL;
- }
-
- /*
- * Zero length reads, nothing to do
- */
- if (len == 0) {
- return 0;
- }
-
- /*
- * Reject reads which go over the end of the flash
- */
- if ((from + len) > mtd->size) {
- return -EINVAL;
- }
-
- /*
- * Get the row and column address to start at
- */
- row = from >> 11;
- column = from & 0x7FF;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: row=%x %d column=%x %d last_row=%x %d\n", chip->name, row, row, column, column, chip->last_row, chip->last_row);
-
- /*
- * Read the data from the chip
- */
- mutex_lock(&chip->lock);
- while (len) {
- uint8_t stat;
- size_t toread;
- int i;
- int tmp;
-
- /*
- * Figure out how much to read
- *
- * If we are reading from the middle of a page then the most we
- * can read is to the end of the page
- */
- toread = len;
- if (toread > (chip->device->page_size - column)) {
- toread = chip->device->page_size - column;
- }
-
- DEBUG(MTD_DEBUG_LEVEL3, "%s: buf=%p toread=%x row=%x column=%x last_row=%x\n", chip->name, pbuf, toread, row, column, chip->last_row);
-
- if (chip->last_row != row) {
- /*
- * Check if the block is bad
- */
- if (test_bit(UBI32_NAND_SPI_ER_BLOCK_FROM_ROW(row), chip->bbt)) {
- mutex_unlock(&chip->lock);
- return -EBADMSG;
- }
-
- /*
- * Load the appropriate page
- */
- ubi32_nand_spi_er_send_cmd_addr(0x13, row);
-
- /*
- * Wait
- */
- stat = ubi32_nand_spi_er_busywait();
- if (stat & UBI32_NAND_SPI_ER_STATUS_OIP) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive stat=%02x\n", chip->name, stat);
-
- /*
- * Chip is stuck?
- */
- mutex_unlock(&chip->lock);
- return -EIO;
- }
-
- /*
- * Check the ECC bits
- */
- stat >>= 4;
- if (stat == 1) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: ECC recovered, row=%x\n", chip->name, row);
- retval = -EUCLEAN;
- }
- if (stat == 2) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: failed ECC, row=%x\n", chip->name, row);
- chip->last_row = UBI32_NAND_SPI_ER_LAST_ROW_INVALID;
- mutex_unlock(&chip->lock);
- return -EBADMSG;
- }
-
- }
-
- chip->last_row = row;
-
- /*
- * Read out the data:
- * We can always read a little too much since there is the
- * OOB after byte addr 2047. The most we'll overread is 3 bytes.
- */
- if (((uint32_t)pbuf & 0x03) == 0) {
- /*
- * Aligned read
- */
- tmp = toread & (~0x03);
- for (i = 0; i < tmp; i += 4) {
- ubi32_nand_spi_er_send_rd_addr(0x03, column << 8);
- *pbuf++ = io->status1;
- column += 4;
- }
- } else {
- /*
- * Unaligned read
- */
- tmp = toread & (~0x03);
- for (i = 0; i < tmp; i += 4) {
- ubi32_nand_spi_er_send_rd_addr(0x03, column << 8);
- memcpy(pbuf, &io->status1, 4);
- column += 4;
- }
- }
-
- /*
- * Fill in any single bytes
- */
- tmp = toread & 0x03;
- if (tmp) {
- uint8_t *bbuf = pbuf;
- uint32_t val;
- ubi32_nand_spi_er_send_rd_addr(0x03, column << 8);
- val = io->status1;
- for (i = 0; i < tmp; i++) {
- *bbuf++ = val >> 24;
- val <<= 8;
- }
- }
-
- len -= toread;
- *retlen += toread;
-
- /*
- * For the next page, increment the row and always start at column 0
- */
- column = 0;
- row++;
- }
-
- mutex_unlock(&chip->lock);
- return retval;
-}
-
-/*
- * ubi32_nand_spi_er_write
- */
-#define WRITE_NOT_ALIGNED(x) ((x & (device->write_size - 1)) != 0)
-static int ubi32_nand_spi_er_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
-{
- struct ubi32_nand_spi_er *chip = mtd->priv;
- const struct ubi32_nand_spi_er_device *device = chip->device;
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
- uint32_t row;
- uint32_t col;
- int res = 0;
- size_t towrite;
-
- DEBUG(MTD_DEBUG_LEVEL2, "%s: write block to %llx len %d from %p\n", chip->name, to, len, buf);
-
- *retlen = 0;
-
- /*
- * nothing to write
- */
- if (!len) {
- return 0;
- }
-
- /*
- * Reject writes which go over the end of the flash
- */
- if ((to + len) > mtd->size) {
- return -EINVAL;
- }
-
- /*
- * buf should be aligned to 16 bits
- */
- if ((uint32_t)buf & 0x01) {
- return -EINVAL;
- }
-
- /*
- * Check to see if everything is page aligned
- */
- if (WRITE_NOT_ALIGNED(to) || WRITE_NOT_ALIGNED(len)) {
- printk(KERN_NOTICE "ubi32_nand_spi_er_write: Attempt to write non page aligned data\n");
- return -EINVAL;
- }
-
- mutex_lock(&chip->lock);
-
- io->ctl0 |= IO_XFL_CTL0_MCB_LOCK;
-
- chip->last_row = UBI32_NAND_SPI_ER_LAST_ROW_INVALID;
-
- /*
- * If the first write is a partial write then write at most the number of
- * bytes to get us page aligned and then the remainder will be
- * page aligned. The last bit may be a partial page as well.
- */
- col = to & (device->page_size - 1);
- towrite = device->page_size - col;
- if (towrite > len) {
- towrite = len;
- }
-
- /*
- * Write the data
- */
- row = to >> 11;
- while (len) {
- uint8_t stat;
- uint32_t my_towrite;
-
- DEBUG(MTD_DEBUG_LEVEL3, "%s: write %p to row:%x col:%x len:%x rem:%x\n", chip->name, buf, row, col, towrite, len);
-
- ubi32_nand_spi_er_write_enable();
-
- /*
- * Move the data into the cache
- */
- my_towrite = towrite;
- while (my_towrite) {
- uint32_t len = my_towrite;
- if (len > 32) {
- len = 32;
- }
-
- ubi32_nand_spi_er_write_buf(buf, col);
- buf += len;
- col += len;
- my_towrite -= len;
- }
-
- /*
- * Program execute
- */
- ubi32_nand_spi_er_send_cmd_addr(0x10, row);
-
- /*
- * Wait
- */
- stat = ubi32_nand_spi_er_busywait();
- if (stat & UBI32_NAND_SPI_ER_STATUS_OIP) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive stat=%02x\n", chip->name, stat);
-
- /*
- * Chip is stuck?
- */
- res = -EIO;
- goto done;
- }
-
- if (stat & (1 << 3)) {
- res = -EBADMSG;
- goto done;
- }
-
- row++;
- len -= towrite;
- *retlen += towrite;
-
- /*
- * At this point, we are always page aligned so start at column 0.
- * Note we may not have a full page to write at the end, hence the
- * check if towrite > len.
- */
- col = 0;
- towrite = device->page_size;
- if (towrite > len) {
- towrite = len;
- }
- }
-
- io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK;
-
- mutex_unlock(&chip->lock);
- return res;
-
-done:
- ubi32_nand_spi_er_write_disable();
-
- io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK;
-
- mutex_unlock(&chip->lock);
-
- return res;
-}
-
-/*
- * ubi32_nand_spi_er_isbad
- */
-static int ubi32_nand_spi_er_isbad(struct mtd_info *mtd, loff_t ofs)
-{
- struct ubi32_nand_spi_er *chip = mtd->priv;
- uint32_t block;
-
- if (ofs & (chip->device->erase_size - 1)) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: address not aligned %llx\n", chip->name, ofs);
- return -EINVAL;
- }
-
- block = ofs >> 17;
-
- return test_bit(block, chip->bbt);
-}
-
-/*
- * ubi32_nand_spi_er_markbad
- */
-static int ubi32_nand_spi_er_markbad(struct mtd_info *mtd, loff_t ofs)
-{
- struct ubi32_nand_spi_er *chip = mtd->priv;
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
- uint32_t block;
- uint32_t row;
- int res = 0;
- uint8_t stat;
-
- if (ofs & (chip->device->erase_size - 1)) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: address not aligned %llx\n", chip->name, ofs);
- return -EINVAL;
- }
-
- block = ofs >> 17;
-
- /*
- * If it's already marked bad, no need to mark it
- */
- if (test_bit(block, chip->bbt)) {
- return 0;
- }
-
- /*
- * Mark it in our cache
- */
- __set_bit(block, chip->bbt);
-
- /*
- * Write the user bad block mark. If it fails, then we really
- * can't do anything about it.
- */
- mutex_lock(&chip->lock);
- chip->last_row = UBI32_NAND_SPI_ER_LAST_ROW_INVALID;
-
- ubi32_nand_spi_er_write_enable();
-
- /*
- * Write the mark
- */
- io->ctl0 |= IO_XFL_CTL0_MCB_LOCK;
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_WR) | IO_XFL_CTL1_FC_DATA(6);
- io->ctl2 = IO_XFL_CTL2_FC_CMD(0x84);
-
- asm volatile (
- " bset "D(IO_INT_SET)"(%[port]), #0, #%%bit("D(IO_PORTX_INT_FIFO_TX_RESET)") \n\t"
- " pipe_flush 0 \n\t"
-
- /*
- * Move the data into the FIFO
- */
- " move.4 "D(IO_TX_FIFO)"(%[port]), %[word1] \n\t"
- " move.4 "D(IO_TX_FIFO)"(%[port]), %[word2] \n\t"
-
- /*
- * Kick off the flash command
- */
- " bset "D(IO_INT_CLR)"(%[port]), #0, #%%bit("D(IO_XFL_INT_DONE)") \n\t"
- " jmpt.t .+4 \n\t"
- " bset "D(IO_INT_SET)"(%[port]), #0, #%%bit("D(IO_XFL_INT_START)") \n\t"
-
- /*
- * Wait for the transaction to finish
- */
- " btst "D(IO_INT_STATUS)"(%[port]), #%%bit("D(IO_XFL_INT_DONE)") \n\t"
- " jmpeq.f .-4 \n\t"
-
- :
- : [word1] "d" (0x0800dead | (UBI32_NAND_SPI_ER_BAD_BLOCK_MARK_OFFSET << 16)),
- [word2] "d" (0xbeef0000),
- [port] "a" (FLASH_PORT)
- : "cc"
- );
-
- io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK;
-
- /*
- * Program execute
- */
- row = block << 6;
- ubi32_nand_spi_er_send_cmd_addr(0x10, row);
-
- /*
- * Wait
- */
- stat = ubi32_nand_spi_er_busywait();
- if (stat & UBI32_NAND_SPI_ER_STATUS_OIP) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive stat=%02x\n", chip->name, stat);
-
- /*
- * Chip is stuck?
- */
- res = -EIO;
- goto done;
- }
-
- if (stat & (1 << 3)) {
- res = -EBADMSG;
- }
-
-done:
- ubi32_nand_spi_er_write_disable();
-
- mutex_unlock(&chip->lock);
-
- return res;
-}
-
-/*
- * ubi32_nand_spi_er_read_bbt
- */
-static int ubi32_nand_spi_er_read_bbt(struct ubi32_nand_spi_er *chip)
-{
- int j;
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-
- for (j = 0; j < chip->device->blocks; j++) {
- unsigned short row = j << 6;
- uint8_t stat;
-
- /*
- * Read Page
- */
- ubi32_nand_spi_er_send_cmd_addr(0x13, row);
-
- /*
- * Wait
- */
- stat = ubi32_nand_spi_er_busywait();
- if (stat & UBI32_NAND_SPI_ER_STATUS_OIP) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive stat=%02x\n", chip->name, stat);
-
- /*
- * Chip is stuck?
- */
- return -EIO;
- }
-
- /*
- * Check factory bad block mark
- */
- ubi32_nand_spi_er_send_rd_addr(0x03, 0x080000);
-
- if ((io->status1 >> 24) != 0xFF) {
- chip->nbb++;
- __set_bit(j, chip->bbt);
- continue;
- }
-
- ubi32_nand_spi_er_send_rd_addr(0x03, 0x080000 | (UBI32_NAND_SPI_ER_BAD_BLOCK_MARK_OFFSET << 8));
- if (io->status1 == 0xdeadbeef) {
- chip->nbb++;
- __set_bit(j, chip->bbt);
- }
- }
-
-#if defined(CONFIG_MTD_DEBUG) && (MTD_DEBUG_LEVEL3 <= CONFIG_MTD_DEBUG_VERBOSE)
- printk("%s: Bad Block Table:", chip->name);
- for (j = 0; j < chip->device->blocks; j++) {
- if ((j % 64) == 0) {
- printk("\n%s: block %03x: ", chip->name, j);
- }
- printk("%c", test_bit(j, chip->bbt) ? 'X' : '.');
- }
- printk("\n%s: Bad Block Numbers: ", chip->name);
- for (j = 0; j < chip->device->blocks; j++) {
- if (test_bit(j, chip->bbt)) {
- printk("%x ", j);
- }
- }
- printk("\n");
-#endif
-
- return 0;
-}
-
-#ifndef MODULE
-/*
- * Called at boot time:
- *
- * ubi32_nand_spi_er=read_only
- * if read_only specified then do not unlock device
- */
-static int __init ubi32_nand_spi_er_setup(char *str)
-{
- if (str && (strncasecmp(str, "read_only", 9) == 0)) {
- read_only = 1;
- }
- return 0;
-}
-
-__setup("ubi32_nand_spi_er=", ubi32_nand_spi_er_setup);
-#endif
-
-/*
- * ubi32_nand_spi_er_probe
- * Detect and initialize ubi32_nand_spi_er device.
- */
-static int __devinit ubi32_nand_spi_er_probe(struct platform_device *pdev)
-{
- uint32_t i;
- uint32_t id;
- int res;
- size_t bbt_bytes;
- struct ubi32_nand_spi_er *chip;
- const struct ubi32_nand_spi_er_device *device;
- struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-
- /*
- * Reset
- */
- for (i = 0; i < 2; i++) {
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD);
- io->ctl2 = IO_XFL_CTL2_FC_CMD(0xFF);
- FLASH_COMMAND_EXEC(io);
- udelay(250);
- }
- udelay(1000);
-
- /*
- * Read out ID
- */
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) | IO_XFL_CTL1_FC_DATA(2) |
- IO_XFL_CTL1_FC_ADDR;
- io->ctl2 = IO_XFL_CTL2_FC_CMD(0x9F);
- FLASH_COMMAND_EXEC(io);
-
- id = io->status1 >> 16;
- device = ubi32_nand_spi_er_devices;
- for (i = 0; i < ARRAY_SIZE(ubi32_nand_spi_er_devices); i++) {
- if (device->id == id) {
- break;
- }
- device++;
- }
- if (i == ARRAY_SIZE(ubi32_nand_spi_er_devices)) {
- return -ENODEV;
- }
-
- /*
- * Initialize our chip structure
- */
- bbt_bytes = DIV_ROUND_UP(device->blocks, BITS_PER_BYTE);
- chip = kzalloc(sizeof(struct ubi32_nand_spi_er) + bbt_bytes, GFP_KERNEL);
- if (!chip) {
- return -ENOMEM;
- }
- snprintf(chip->name, sizeof(chip->name), "%s", device->name);
-
- chip->device = device;
- chip->last_row = UBI32_NAND_SPI_ER_LAST_ROW_INVALID;
-
- mutex_init(&chip->lock);
-
- chip->mtd.type = MTD_NANDFLASH;
- chip->mtd.flags = MTD_WRITEABLE;
-
- /*
- * #blocks * block size * n blocks
- */
- chip->mtd.size = device->blocks * device->pages_per_block * device->page_size;
- chip->mtd.erasesize = device->erase_size;
-
- /*
- * 1 page, optionally we can support partial write (512)
- */
- chip->mtd.writesize = device->write_size;
- chip->mtd.name = device->name;
- chip->mtd.erase = ubi32_nand_spi_er_erase;
- chip->mtd.read = ubi32_nand_spi_er_read;
- chip->mtd.write = ubi32_nand_spi_er_write;
- chip->mtd.block_isbad = ubi32_nand_spi_er_isbad;
- chip->mtd.block_markbad = ubi32_nand_spi_er_markbad;
- chip->mtd.priv = chip;
-
- /*
- * Cache the bad block table
- */
- res = ubi32_nand_spi_er_read_bbt(chip);
- if (res) {
- kfree(chip);
- return res;
- }
-
- /*
- * Un/lock the chip
- */
- io->ctl0 |= IO_XFL_CTL0_MCB_LOCK;
- io->ctl1 &= ~IO_XFL_CTL1_MASK;
- io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_WR) | IO_XFL_CTL1_FC_DATA(2);
- io->ctl2 = IO_XFL_CTL2_FC_CMD(0x1F);
-
- if (read_only) {
- i = 0xa0380000;
- } else {
- i = 0xa0000000;
- }
- asm volatile (
- " bset "D(IO_INT_SET)"(%[port]), #0, #%%bit("D(IO_PORTX_INT_FIFO_TX_RESET)") \n\t"
- " pipe_flush 0 \n\t"
-
- /*
- * Move the data into the FIFO
- */
- " move.4 "D(IO_TX_FIFO)"(%[port]), %[word1] \n\t"
-
- /*
- * Kick off the flash command
- */
- " bset "D(IO_INT_CLR)"(%[port]), #0, #%%bit("D(IO_XFL_INT_DONE)") \n\t"
- " jmpt.t .+4 \n\t"
- " bset "D(IO_INT_SET)"(%[port]), #0, #%%bit("D(IO_XFL_INT_START)") \n\t"
-
- /*
- * Wait for the transaction to finish
- */
- " btst "D(IO_INT_STATUS)"(%[port]), #%%bit("D(IO_XFL_INT_DONE)") \n\t"
- " jmpeq.f .-4 \n\t"
-
- :
- : [word1] "d" (i),
- [port] "a" (FLASH_PORT)
- : "cc"
- );
- io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK;
-
- dev_set_drvdata(&pdev->dev, chip);
-
- printk(KERN_INFO "%s: added device size: %u KBytes %lu bad blocks %s\n", chip->mtd.name, DIV_ROUND_UP(chip->mtd.size, 1024), chip->nbb, read_only ? "[read only]" : "");
- return add_mtd_device(&chip->mtd);
-}
-
-/*
- * ubi32_nand_spi_er_remove
- */
-static int __devexit ubi32_nand_spi_er_remove(struct platform_device *pdev)
-{
- struct ubi32_nand_spi_er *chip = dev_get_drvdata(&pdev->dev);
- int status;
-
- DEBUG(MTD_DEBUG_LEVEL1, "%s: remove\n", chip->name);
-
- status = del_mtd_device(&chip->mtd);
- if (status == 0) {
- kfree(chip);
- }
-
- dev_set_drvdata(&pdev->dev, NULL);
- return status;
-}
-
-static struct platform_device *ubi32_nand_spi_er_device;
-
-static struct platform_driver ubi32_nand_spi_er_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-
- .probe = ubi32_nand_spi_er_probe,
- .remove = ubi32_nand_spi_er_remove,
-};
-
-/*
- * ubi32_nand_spi_er_init
- */
-static int __init ubi32_nand_spi_er_init(void)
-{
- int ret;
-
- ret = platform_driver_register(&ubi32_nand_spi_er_driver);
-
- if (ret) {
- return ret;
- }
-
- ubi32_nand_spi_er_device = platform_device_alloc(DRIVER_NAME, 0);
- if (!ubi32_nand_spi_er_device) {
- return -ENOMEM;
- }
-
- ret = platform_device_add(ubi32_nand_spi_er_device);
- if (ret) {
- platform_device_put(ubi32_nand_spi_er_device);
- platform_driver_unregister(&ubi32_nand_spi_er_driver);
- }
-
- return ret;
-}
-module_init(ubi32_nand_spi_er_init);
-
-/*
- * ubi32_nand_spi_er_exit
- */
-static void __exit ubi32_nand_spi_er_exit(void)
-{
- platform_device_unregister(ubi32_nand_spi_er_device);
- platform_driver_unregister(&ubi32_nand_spi_er_driver);
-}
-module_exit(ubi32_nand_spi_er_exit);
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Patrick Tjin");
-MODULE_DESCRIPTION("MTD ubi32_nand_spi_er driver for ubicom32 SPI flash controller.");
+++ /dev/null
-/*
- * drivers/net/ubi32-eth.c
- * Ubicom32 ethernet TIO interface driver.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-/*
- * ubi32_eth.c
- * Ethernet driver for Ip5k/Ip7K
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/moduleparam.h>
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-
-#include <linux/in.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/mii.h>
-#include <linux/if_vlan.h>
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/skbuff.h>
-#include <asm/checksum.h>
-#include <asm/ip5000.h>
-#include <asm/devtree.h>
-#include <asm/system.h>
-
-#define UBICOM32_USE_NAPI /* define this to use NAPI instead of tasklet */
-//#define UBICOM32_USE_POLLING /* define this to use polling instead of interrupt */
-#include "ubi32-eth.h"
-
-/*
- * TODO:
- * mac address from flash
- * multicast filter
- * ethtool support
- * sysfs support
- * skb->nrfrag support
- * ioctl
- * monitor phy status
- */
-
-extern int ubi32_ocm_skbuf_max, ubi32_ocm_skbuf, ubi32_ddr_skbuf;
-static const char *eth_if_name[UBI32_ETH_NUM_OF_DEVICES] =
- {"eth_lan", "eth_wan"};
-static struct net_device *ubi32_eth_devices[UBI32_ETH_NUM_OF_DEVICES] =
- {NULL, NULL};
-static u8_t mac_addr[UBI32_ETH_NUM_OF_DEVICES][ETH_ALEN] = {
- {0x00, 0x03, 0x64, 'l', 'a', 'n'},
- {0x00, 0x03, 0x64, 'w', 'a', 'n'}};
-
-#if (defined(CONFIG_ZONE_DMA) && defined(CONFIG_UBICOM32_OCM_FOR_SKB))
-static inline struct sk_buff *ubi32_alloc_skb_ocm(struct net_device *dev, unsigned int length)
-{
- return __dev_alloc_skb(length, GFP_ATOMIC | __GFP_NOWARN | __GFP_NORETRY | GFP_DMA);
-}
-#endif
-
-static inline struct sk_buff *ubi32_alloc_skb(struct net_device *dev, unsigned int length)
-{
- return __dev_alloc_skb(length, GFP_ATOMIC | __GFP_NOWARN);
-}
-
-static void ubi32_eth_vp_rxtx_enable(struct net_device *dev)
-{
- struct ubi32_eth_private *priv = netdev_priv(dev);
- priv->regs->command = UBI32_ETH_VP_CMD_RX_ENABLE | UBI32_ETH_VP_CMD_TX_ENABLE;
- priv->regs->int_mask = (UBI32_ETH_VP_INT_RX | UBI32_ETH_VP_INT_TX);
- ubicom32_set_interrupt(priv->vp_int_bit);
-}
-
-static void ubi32_eth_vp_rxtx_stop(struct net_device *dev)
-{
- struct ubi32_eth_private *priv = netdev_priv(dev);
- priv->regs->command = 0;
- priv->regs->int_mask = 0;
- ubicom32_set_interrupt(priv->vp_int_bit);
-
- /* Wait for graceful shutdown */
- while (priv->regs->status & (UBI32_ETH_VP_STATUS_RX_STATE | UBI32_ETH_VP_STATUS_TX_STATE));
-}
-
-/*
- * ubi32_eth_tx_done()
- */
-static int ubi32_eth_tx_done(struct net_device *dev)
-{
- struct ubi32_eth_private *priv;
- struct sk_buff *skb;
- volatile void *pdata;
- struct ubi32_eth_dma_desc *desc;
- u32_t count = 0;
-
- priv = netdev_priv(dev);
-
- priv->regs->int_status &= ~UBI32_ETH_VP_INT_TX;
- while (priv->tx_tail != priv->regs->tx_out) {
- pdata = priv->regs->tx_dma_ring[priv->tx_tail];
- BUG_ON(pdata == NULL);
-
- skb = container_of((void *)pdata, struct sk_buff, cb);
- desc = (struct ubi32_eth_dma_desc *)pdata;
- if (unlikely(!(desc->status & UBI32_ETH_VP_TX_OK))) {
- dev->stats.tx_errors++;
- } else {
- dev->stats.tx_packets++;
- dev->stats.tx_bytes += skb->len;
- }
- dev_kfree_skb_any(skb);
- priv->regs->tx_dma_ring[priv->tx_tail] = NULL;
- priv->tx_tail = (priv->tx_tail + 1) & TX_DMA_RING_MASK;
- count++;
- }
-
- if (unlikely(priv->regs->status & UBI32_ETH_VP_STATUS_TX_Q_FULL)) {
- spin_lock(&priv->lock);
- if (priv->regs->status & UBI32_ETH_VP_STATUS_TX_Q_FULL) {
- priv->regs->status &= ~UBI32_ETH_VP_STATUS_TX_Q_FULL;
- netif_wake_queue(dev);
- }
- spin_unlock(&priv->lock);
- }
- return count;
-}
-
-/*
- * ubi32_eth_receive()
- * To avoid locking overhead, this is called only
- * by tasklet when not using NAPI, or
- * by NAPI poll when using NAPI.
- * return number of frames processed
- */
-static int ubi32_eth_receive(struct net_device *dev, int quota)
-{
- struct ubi32_eth_private *priv = netdev_priv(dev);
- unsigned short rx_in = priv->regs->rx_in;
- struct sk_buff *skb;
- struct ubi32_eth_dma_desc *desc = NULL;
- volatile void *pdata;
-
- int extra_reserve_adj;
- int extra_alloc = UBI32_ETH_RESERVE_SPACE + UBI32_ETH_TRASHED_MEMORY;
- int replenish_cnt, count = 0;
- int replenish_max = RX_DMA_MAX_QUEUE_SIZE;
-#if (defined(CONFIG_ZONE_DMA) && defined(CONFIG_UBICOM32_OCM_FOR_SKB))
- if (likely(dev == ubi32_eth_devices[0]))
- replenish_max = min(ubi32_ocm_skbuf_max, RX_DMA_MAX_QUEUE_SIZE);;
-#endif
-
- if (unlikely(rx_in == priv->regs->rx_out))
- priv->vp_stats.rx_q_full_cnt++;
-
- priv->regs->int_status &= ~UBI32_ETH_VP_INT_RX;
- while (priv->rx_tail != priv->regs->rx_out) {
- if (unlikely(count == quota)) {
- /* There is still frame pending to be processed */
- priv->vp_stats.rx_throttle++;
- break;
- }
-
- pdata = priv->regs->rx_dma_ring[priv->rx_tail];
- BUG_ON(pdata == NULL);
-
- desc = (struct ubi32_eth_dma_desc *)pdata;
- skb = container_of((void *)pdata, struct sk_buff, cb);
- count++;
- priv->regs->rx_dma_ring[priv->rx_tail] = NULL;
- priv->rx_tail = ((priv->rx_tail + 1) & RX_DMA_RING_MASK);
-
- /*
- * Check only RX_OK bit here.
- * The rest of status word is used as timestamp
- */
- if (unlikely(!(desc->status & UBI32_ETH_VP_RX_OK))) {
- dev->stats.rx_errors++;
- dev_kfree_skb_any(skb);
- continue;
- }
-
- skb_put(skb, desc->data_len);
- skb->dev = dev;
- skb->protocol = eth_type_trans(skb, dev);
- skb->ip_summed = CHECKSUM_NONE;
- dev->stats.rx_bytes += skb->len;
- dev->stats.rx_packets++;
-#ifndef UBICOM32_USE_NAPI
- netif_rx(skb);
-#else
- netif_receive_skb(skb);
-#endif
- }
-
- /* fill in more descripor for VP*/
- replenish_cnt = replenish_max -
- ((RX_DMA_RING_SIZE + rx_in - priv->rx_tail) & RX_DMA_RING_MASK);
- if (replenish_cnt > 0) {
-#if (defined(CONFIG_ZONE_DMA) && defined(CONFIG_UBICOM32_OCM_FOR_SKB))
- /*
- * black magic for perforamnce:
- * Try to allocate skb from OCM only for first Ethernet I/F.
- * Also limit number of RX buffers to 21 due to limited OCM.
- */
- if (likely(dev == ubi32_eth_devices[0])) {
- do {
- skb = ubi32_alloc_skb_ocm(dev, RX_BUF_SIZE + extra_alloc);
- if (!skb) {
- break;
- }
- /* set up dma descriptor */
- ubi32_ocm_skbuf++;
- desc = (struct ubi32_eth_dma_desc *)skb->cb;
- extra_reserve_adj =
- ((u32)skb->data + UBI32_ETH_RESERVE_SPACE + ETH_HLEN) &
- (CACHE_LINE_SIZE - 1);
- skb_reserve(skb, UBI32_ETH_RESERVE_SPACE - extra_reserve_adj);
- desc->data_pointer = skb->data;
- desc->buffer_len = RX_BUF_SIZE + UBI32_ETH_TRASHED_MEMORY;
- desc->data_len = 0;
- desc->status = 0;
- priv->regs->rx_dma_ring[rx_in] = desc;
- rx_in = (rx_in + 1) & RX_DMA_RING_MASK;
- } while (--replenish_cnt > 0);
- }
-#endif
-
- while (replenish_cnt-- > 0) {
- skb = ubi32_alloc_skb(dev, RX_BUF_SIZE + extra_alloc);
- if (!skb) {
- priv->vp_stats.rx_alloc_err++;
- break;
- }
- /* set up dma descriptor */
- ubi32_ddr_skbuf++;
- desc = (struct ubi32_eth_dma_desc *)skb->cb;
- extra_reserve_adj =
- ((u32)skb->data + UBI32_ETH_RESERVE_SPACE + ETH_HLEN) &
- (CACHE_LINE_SIZE - 1);
- skb_reserve(skb, UBI32_ETH_RESERVE_SPACE - extra_reserve_adj);
- desc->data_pointer = skb->data;
- desc->buffer_len = RX_BUF_SIZE + UBI32_ETH_TRASHED_MEMORY;
- desc->data_len = 0;
- desc->status = 0;
- priv->regs->rx_dma_ring[rx_in] = desc;
- rx_in = (rx_in + 1) & RX_DMA_RING_MASK;
- }
-
- wmb();
- priv->regs->rx_in = rx_in;
- ubicom32_set_interrupt(priv->vp_int_bit);
- }
-
- if (likely(count > 0)) {
- dev->last_rx = jiffies;
- }
- return count;
-}
-
-#ifdef UBICOM32_USE_NAPI
-static int ubi32_eth_napi_poll(struct napi_struct *napi, int budget)
-{
- struct ubi32_eth_private *priv = container_of(napi, struct ubi32_eth_private, napi);
- struct net_device *dev = priv->dev;
- u32_t count;
-
- if (priv->tx_tail != priv->regs->tx_out) {
- ubi32_eth_tx_done(dev);
- }
-
- count = ubi32_eth_receive(dev, budget);
-
- if (count < budget) {
- napi_complete(napi);
- priv->regs->int_mask |= (UBI32_ETH_VP_INT_RX | UBI32_ETH_VP_INT_TX);
- if ((priv->rx_tail != priv->regs->rx_out) || (priv->tx_tail != priv->regs->tx_out)) {
- if (napi_reschedule(napi)) {
- priv->regs->int_mask = 0;
- }
- }
- }
- return count;
-}
-
-#else
-static void ubi32_eth_do_tasklet(unsigned long arg)
-{
- struct net_device *dev = (struct net_device *)arg;
- struct ubi32_eth_private *priv = netdev_priv(dev);
-
- if (priv->tx_tail != priv->regs->tx_out) {
- ubi32_eth_tx_done(dev);
- }
-
- /* always call receive to process new RX frame as well as replenish RX buffers */
- ubi32_eth_receive(dev, UBI32_RX_BOUND);
-
- priv->regs->int_mask |= (UBI32_ETH_VP_INT_RX | UBI32_ETH_VP_INT_TX);
- if ((priv->rx_tail != priv->regs->rx_out) || (priv->tx_tail != priv->regs->tx_out)) {
- priv->regs->int_mask = 0;
- tasklet_schedule(&priv->tsk);
- }
-}
-#endif
-
-#if defined(UBICOM32_USE_POLLING)
-static struct timer_list eth_poll_timer;
-
-static void ubi32_eth_poll(unsigned long arg)
-{
- struct net_device *dev;
- struct ubi32_eth_private *priv;
- int i;
-
- for (i = 0; i < UBI32_ETH_NUM_OF_DEVICES; i++) {
- dev = ubi32_eth_devices[i];
- if (dev && (dev->flags & IFF_UP)) {
- priv = netdev_priv(dev);
-#ifdef UBICOM32_USE_NAPI
- napi_schedule(&priv->napi);
-#else
- tasklet_schedule(&priv->tsk);
-#endif
- }
- }
-
- eth_poll_timer.expires = jiffies + 2;
- add_timer(ð_poll_timer);
-}
-
-#else
-static irqreturn_t ubi32_eth_interrupt(int irq, void *dev_id)
-{
- struct ubi32_eth_private *priv;
-
- struct net_device *dev = (struct net_device *)dev_id;
- BUG_ON(irq != dev->irq);
-
- priv = netdev_priv(dev);
- if (unlikely(!(priv->regs->int_status & priv->regs->int_mask))) {
- return IRQ_NONE;
- }
-
- /*
- * Disable port interrupt
- */
-#ifdef UBICOM32_USE_NAPI
- if (napi_schedule_prep(&priv->napi)) {
- priv->regs->int_mask = 0;
- __napi_schedule(&priv->napi);
- }
-#else
- priv->regs->int_mask = 0;
- tasklet_schedule(&priv->tsk);
-#endif
- return IRQ_HANDLED;
-}
-#endif
-
-/*
- * ubi32_eth_open
- */
-static int ubi32_eth_open(struct net_device *dev)
-{
- struct ubi32_eth_private *priv = netdev_priv(dev);
- int err;
-
- printk(KERN_INFO "eth open %s\n",dev->name);
-#ifndef UBICOM32_USE_POLLING
- /* request_region() */
- err = request_irq(dev->irq, ubi32_eth_interrupt, IRQF_DISABLED, dev->name, dev);
- if (err) {
- printk(KERN_WARNING "fail to request_irq %d\n",err);
- return -ENODEV;
- }
-#endif
-#ifdef UBICOM32_USE_NAPI
- napi_enable(&priv->napi);
-#else
- tasklet_init(&priv->tsk, ubi32_eth_do_tasklet, (unsigned long)dev);
-#endif
-
- /* call receive to supply RX buffers */
- ubi32_eth_receive(dev, RX_DMA_MAX_QUEUE_SIZE);
-
- /* check phy status and call netif_carrier_on */
- ubi32_eth_vp_rxtx_enable(dev);
- netif_start_queue(dev);
- return 0;
-}
-
-static int ubi32_eth_close(struct net_device *dev)
-{
- struct ubi32_eth_private *priv = netdev_priv(dev);
- volatile void *pdata;
- struct sk_buff *skb;
-
-#ifndef UBICOM32_USE_POLLING
- free_irq(dev->irq, dev);
-#endif
- netif_stop_queue(dev); /* can't transmit any more */
-#ifdef UBICOM32_USE_NAPI
- napi_disable(&priv->napi);
-#else
- tasklet_kill(&priv->tsk);
-#endif
- ubi32_eth_vp_rxtx_stop(dev);
-
- /*
- * RX clean up
- */
- while (priv->rx_tail != priv->regs->rx_in) {
- pdata = priv->regs->rx_dma_ring[priv->rx_tail];
- skb = container_of((void *)pdata, struct sk_buff, cb);
- priv->regs->rx_dma_ring[priv->rx_tail] = NULL;
- dev_kfree_skb_any(skb);
- priv->rx_tail = ((priv->rx_tail + 1) & RX_DMA_RING_MASK);
- }
- priv->regs->rx_in = 0;
- priv->regs->rx_out = priv->regs->rx_in;
- priv->rx_tail = priv->regs->rx_in;
-
- /*
- * TX clean up
- */
- BUG_ON(priv->regs->tx_out != priv->regs->tx_in);
- ubi32_eth_tx_done(dev);
- BUG_ON(priv->tx_tail != priv->regs->tx_in);
- priv->regs->tx_in = 0;
- priv->regs->tx_out = priv->regs->tx_in;
- priv->tx_tail = priv->regs->tx_in;
-
- return 0;
-}
-
-/*
- * ubi32_eth_set_config
- */
-static int ubi32_eth_set_config(struct net_device *dev, struct ifmap *map)
-{
- /* if must to down to config it */
- printk(KERN_INFO "set_config %x\n", dev->flags);
- if (dev->flags & IFF_UP)
- return -EBUSY;
-
- /* I/O and IRQ can not be changed */
- if (map->base_addr != dev->base_addr) {
- printk(KERN_WARNING "%s: Can't change I/O address\n", dev->name);
- return -EOPNOTSUPP;
- }
-
-#ifndef UBICOM32_USE_POLLING
- if (map->irq != dev->irq) {
- printk(KERN_WARNING "%s: Can't change IRQ\n", dev->name);
- return -EOPNOTSUPP;
- }
-#endif
-
- /* ignore other fields */
- return 0;
-}
-
-static int ubi32_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct ubi32_eth_private *priv = netdev_priv(dev);
- struct ubi32_eth_dma_desc *desc = NULL;
- unsigned short space, tx_in;
-
- tx_in = priv->regs->tx_in;
-
- dev->trans_start = jiffies; /* save the timestamp */
- space = TX_DMA_RING_MASK - ((TX_DMA_RING_SIZE + tx_in - priv->tx_tail) & TX_DMA_RING_MASK);
-
- if (unlikely(space == 0)) {
- if (!(priv->regs->status & UBI32_ETH_VP_STATUS_TX_Q_FULL)) {
- spin_lock(&priv->lock);
- if (!(priv->regs->status & UBI32_ETH_VP_STATUS_TX_Q_FULL)) {
- priv->regs->status |= UBI32_ETH_VP_STATUS_TX_Q_FULL;
- priv->vp_stats.tx_q_full_cnt++;
- netif_stop_queue(dev);
- }
- spin_unlock(&priv->lock);
- }
-
- /* give both HW and this driver an extra trigger */
- priv->regs->int_mask |= UBI32_ETH_VP_INT_TX;
-#ifndef UBICOM32_USE_POLLING
- ubicom32_set_interrupt(dev->irq);
-#endif
- ubicom32_set_interrupt(priv->vp_int_bit);
-
- return NETDEV_TX_BUSY;
- }
-
- /*still have room */
- desc = (struct ubi32_eth_dma_desc *)skb->cb;
- desc->data_pointer = skb->data;
- desc->data_len = skb->len;
- priv->regs->tx_dma_ring[tx_in] = desc;
- tx_in = ((tx_in + 1) & TX_DMA_RING_MASK);
- wmb();
- priv->regs->tx_in = tx_in;
- /* kick the HRT */
- ubicom32_set_interrupt(priv->vp_int_bit);
-
- return NETDEV_TX_OK;
-}
-
-/*
- * Deal with a transmit timeout.
- */
-static void ubi32_eth_tx_timeout (struct net_device *dev)
-{
- struct ubi32_eth_private *priv = netdev_priv(dev);
- dev->stats.tx_errors++;
- priv->regs->int_mask |= UBI32_ETH_VP_INT_TX;
-#ifndef UBICOM32_USE_POLLING
- ubicom32_set_interrupt(dev->irq);
-#endif
- ubicom32_set_interrupt(priv->vp_int_bit);
-}
-
-static int ubi32_eth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- struct ubi32_eth_private *priv = netdev_priv(dev);
- struct mii_ioctl_data *data = if_mii(rq);
-
- printk(KERN_INFO "ioctl %s, %d\n", dev->name, cmd);
- switch (cmd) {
- case SIOCGMIIPHY:
- data->phy_id = 0;
- break;
-
- case SIOCGMIIREG:
- if ((data->reg_num & 0x1F) == MII_BMCR) {
- /* Make up MII control register value from what we know */
- data->val_out = 0x0000
- | ((priv->regs->status & UBI32_ETH_VP_STATUS_DUPLEX)
- ? BMCR_FULLDPLX : 0)
- | ((priv->regs->status & UBI32_ETH_VP_STATUS_SPEED100)
- ? BMCR_SPEED100 : 0)
- | ((priv->regs->status & UBI32_ETH_VP_STATUS_SPEED1000)
- ? BMCR_SPEED1000 : 0);
- } else if ((data->reg_num & 0x1F) == MII_BMSR) {
- /* Make up MII status register value from what we know */
- data->val_out =
- (BMSR_100FULL|BMSR_100HALF|BMSR_10FULL|BMSR_10HALF)
- | ((priv->regs->status & UBI32_ETH_VP_STATUS_LINK)
- ? BMSR_LSTATUS : 0);
- } else {
- return -EIO;
- }
- break;
-
- case SIOCSMIIREG:
- return -EOPNOTSUPP;
- break;
-
- default:
- return -EOPNOTSUPP;
- }
-
- return 0;
-}
-
-/*
- * Return statistics to the caller
- */
-static struct net_device_stats *ubi32_eth_get_stats(struct net_device *dev)
-{
- return &dev->stats;
-}
-
-
-static int ubi32_eth_change_mtu(struct net_device *dev, int new_mtu)
-{
- struct ubi32_eth_private *priv = netdev_priv(dev);
- unsigned long flags;
-
- if ((new_mtu < 68) || (new_mtu > 1500))
- return -EINVAL;
-
- spin_lock_irqsave(&priv->lock, flags);
- dev->mtu = new_mtu;
- spin_unlock_irqrestore(&priv->lock, flags);
- printk(KERN_INFO "set mtu to %d", new_mtu);
- return 0;
-}
-
-/*
- * ubi32_eth_cleanup: unload the module
- */
-void ubi32_eth_cleanup(void)
-{
- struct ubi32_eth_private *priv;
- struct net_device *dev;
- int i;
-
- for (i = 0; i < UBI32_ETH_NUM_OF_DEVICES; i++) {
- dev = ubi32_eth_devices[i];
- if (dev) {
- priv = netdev_priv(dev);
- kfree(priv->regs->tx_dma_ring);
- unregister_netdev(dev);
- free_netdev(dev);
- ubi32_eth_devices[i] = NULL;
- }
- }
-}
-
- static const struct net_device_ops ubi32_netdev_ops = {
- .ndo_open = ubi32_eth_open,
- .ndo_stop = ubi32_eth_close,
- .ndo_start_xmit = ubi32_eth_start_xmit,
- .ndo_tx_timeout = ubi32_eth_tx_timeout,
- .ndo_do_ioctl = ubi32_eth_ioctl,
- .ndo_change_mtu = ubi32_eth_change_mtu,
- .ndo_set_config = ubi32_eth_set_config,
- .ndo_get_stats = ubi32_eth_get_stats,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
- };
-
-int ubi32_eth_init_module(void)
-{
- struct ethtionode *eth_node;
- struct net_device *dev;
- struct ubi32_eth_private *priv;
- int i, err;
-
- /*
- * Device allocation.
- */
- err = 0;
- for (i = 0; i < UBI32_ETH_NUM_OF_DEVICES; i++) {
- /*
- * See if the eth_vp is in the device tree.
- */
- eth_node = (struct ethtionode *)devtree_find_node(eth_if_name[i]);
- if (!eth_node) {
- printk(KERN_INFO "%s does not exist\n", eth_if_name[i]);
- continue;
- }
-
- eth_node->tx_dma_ring = (struct ubi32_eth_dma_desc **)kmalloc(
- sizeof(struct ubi32_eth_dma_desc *) *
- (TX_DMA_RING_SIZE + RX_DMA_RING_SIZE),
- GFP_ATOMIC | __GFP_NOWARN | __GFP_NORETRY | GFP_DMA);
-
- if (eth_node->tx_dma_ring == NULL) {
- eth_node->tx_dma_ring = (struct ubi32_eth_dma_desc **)kmalloc(
- sizeof(struct ubi32_eth_dma_desc *) *
- (TX_DMA_RING_SIZE + RX_DMA_RING_SIZE), GFP_KERNEL);
- printk(KERN_INFO "fail to allocate from OCM\n");
- }
-
- if (!eth_node->tx_dma_ring) {
- err = -ENOMEM;
- break;
- }
- eth_node->rx_dma_ring = eth_node->tx_dma_ring + TX_DMA_RING_SIZE;
- eth_node->tx_sz = TX_DMA_RING_SIZE - 1;
- eth_node->rx_sz = RX_DMA_RING_SIZE - 1;
-
- dev = alloc_etherdev(sizeof(struct ubi32_eth_private));
- if (!dev) {
- kfree(eth_node->tx_dma_ring);
- err = -ENOMEM;
- break;
- }
- priv = netdev_priv(dev);
- priv->dev = dev;
-
- /*
- * This just fill in some default Ubicom MAC address
- */
- memcpy(dev->dev_addr, mac_addr[i], ETH_ALEN);
- memset(dev->broadcast, 0xff, ETH_ALEN);
-
- priv->regs = eth_node;
- priv->regs->command = 0;
- priv->regs->int_mask = 0;
- priv->regs->int_status = 0;
- priv->regs->tx_out = 0;
- priv->regs->rx_out = 0;
- priv->regs->tx_in = 0;
- priv->regs->rx_in = 0;
- priv->rx_tail = 0;
- priv->tx_tail = 0;
-
- priv->vp_int_bit = eth_node->dn.sendirq;
- dev->irq = eth_node->dn.recvirq;
-
- spin_lock_init(&priv->lock);
-
- dev->netdev_ops = &ubi32_netdev_ops;
-
- dev->watchdog_timeo = UBI32_ETH_VP_TX_TIMEOUT;
-#ifdef UBICOM32_USE_NAPI
- netif_napi_add(dev, &priv->napi, ubi32_eth_napi_poll, UBI32_ETH_NAPI_WEIGHT);
-#endif
- err = register_netdev(dev);
- if (err) {
- printk(KERN_WARNING "Failed to register netdev %s\n", eth_if_name[i]);
- //release_region();
- free_netdev(dev);
- kfree(eth_node->tx_dma_ring);
- break;
- }
-
- ubi32_eth_devices[i] = dev;
- printk(KERN_INFO "%s vp_base:0x%p, tio_int:%d irq:%d feature:0x%lx\n",
- dev->name, priv->regs, eth_node->dn.sendirq, dev->irq, dev->features);
- }
-
- if (err) {
- ubi32_eth_cleanup();
- return err;
- }
-
- if (!ubi32_eth_devices[0] && !ubi32_eth_devices[1]) {
- return -ENODEV;
- }
-
-#if defined(UBICOM32_USE_POLLING)
- init_timer(ð_poll_timer);
- eth_poll_timer.function = ubi32_eth_poll;
- eth_poll_timer.data = (unsigned long)0;
- eth_poll_timer.expires = jiffies + 2;
- add_timer(ð_poll_timer);
-#endif
-
- return 0;
-}
-
-module_init(ubi32_eth_init_module);
-module_exit(ubi32_eth_cleanup);
-
-MODULE_AUTHOR("Kan Yan, Greg Ren");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * drivers/net/ubi32-eth.h
- * Ubicom32 ethernet TIO interface driver definitions.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#ifndef _UBI32_ETH_H
-#define _UBI32_ETH_H
-
-#include <asm/devtree.h>
-
-#define UBI32_ETH_NUM_OF_DEVICES 2
-
-/*
- * Number of bytes trashed beyond the packet data.
- */
-#define UBI32_ETH_TRASHED_MEMORY (CACHE_LINE_SIZE + ETH_HLEN - 1)
-
-/*
- * Linux already reserves NET_SKB_PAD bytes of headroom in each sk_buff.
- * We want to be able to reserve at least one cache line to align Ethernet
- * and IP header to cache line.
- * Note that the TIO expects a CACHE_LINE_SIZE - ETH_HLEN aligned Ethernet
- * header, while satisfies NET_IP_ALIGN (= 2) automatically.
- * (NET_SKB_PAD is 16, NET_IP_ALIGN is 2, CACHE_LINE_SIZE is 32).
- * You can add more space by making UBI32_ETH_RESERVE_EXTRA != 0.
- */
-#define UBI32_ETH_RESERVE_EXTRA (1 * CACHE_LINE_SIZE)
-#define UBI32_ETH_RESERVE_SPACE (UBI32_ETH_RESERVE_EXTRA + CACHE_LINE_SIZE)
-
-struct ubi32_eth_dma_desc {
- volatile void *data_pointer; /* pointer to the buffer */
- volatile u16 buffer_len; /* the buffer size */
- volatile u16 data_len; /* actual frame length */
- volatile u32 status; /* bit0: status to be update by VP; bit[31:1] time stamp */
-};
-
-#define TX_DMA_RING_SIZE (1<<8)
-#define TX_DMA_RING_MASK (TX_DMA_RING_SIZE - 1)
-#define RX_DMA_RING_SIZE (1<<8)
-#define RX_DMA_RING_MASK (RX_DMA_RING_SIZE - 1)
-
-#define RX_DMA_MAX_QUEUE_SIZE (RX_DMA_RING_SIZE - 1) /* no more than (RX_DMA_RING_SIZE - 1) */
-#define RX_MAX_PKT_SIZE (ETH_DATA_LEN + ETH_HLEN + VLAN_HLEN)
-#define RX_MIN_PKT_SIZE ETH_ZLEN
-#define RX_BUF_SIZE (RX_MAX_PKT_SIZE + VLAN_HLEN) /* allow double VLAN tag */
-
-#define UBI32_ETH_VP_TX_TIMEOUT (10*HZ)
-
-struct ubi32_eth_vp_stats {
- u32 rx_alloc_err;
- u32 tx_q_full_cnt;
- u32 rx_q_full_cnt;
- u32 rx_throttle;
-};
-
-struct ubi32_eth_private {
- struct net_device *dev;
- struct ubi32_eth_vp_stats vp_stats;
- spinlock_t lock;
-#ifdef UBICOM32_USE_NAPI
- struct napi_struct napi;
-#else
- struct tasklet_struct tsk;
-#endif
- struct ethtionode *regs;
- u16 rx_tail;
- u16 tx_tail;
- u32 vp_int_bit;
-};
-
-struct ethtionode {
- struct devtree_node dn;
- volatile u16 command;
- volatile u16 status;
- volatile u16 int_mask; /* interrupt mask */
- volatile u16 int_status; /* interrupt mask */
- volatile u16 tx_in; /* owned by driver */
- volatile u16 tx_out; /* owned by vp */
- volatile u16 rx_in; /* owned by driver */
- volatile u16 rx_out; /* owned by vp */
- u16 tx_sz; /* owned by driver */
- u16 rx_sz; /* owned by driver */
- struct ubi32_eth_dma_desc **tx_dma_ring;
- struct ubi32_eth_dma_desc **rx_dma_ring;
-};
-
-#define UBI32_ETH_VP_STATUS_LINK (1<<0)
-#define UBI32_ETH_VP_STATUS_SPEED100 (0x1<<1)
-#define UBI32_ETH_VP_STATUS_SPEED1000 (0x1<<2)
-#define UBI32_ETH_VP_STATUS_DUPLEX (0x1<<3)
-#define UBI32_ETH_VP_STATUS_FLOW_CTRL (0x1<<4)
-
-#define UBI32_ETH_VP_STATUS_RX_STATE (0x1<<5)
-#define UBI32_ETH_VP_STATUS_TX_STATE (0x1<<6)
-
-#define UBI32_ETH_VP_STATUS_TX_Q_FULL (1<<8)
-
-#define UBI32_ETH_VP_INT_RX (1<<0)
-#define UBI32_ETH_VP_INT_TX (1<<1)
-
-#define UBI32_ETH_VP_CMD_RX_ENABLE (1<<0)
-#define UBI32_ETH_VP_CMD_TX_ENABLE (1<<1)
-
-#define UBI32_ETH_VP_RX_OK (1<<0)
-#define UBI32_ETH_VP_TX_OK (1<<1)
-
-#define UBI32_TX_BOUND TX_DMA_RING_SIZE
-#define UBI32_RX_BOUND 64
-#define UBI32_ETH_NAPI_WEIGHT 64 /* for GigE */
-#endif
+++ /dev/null
-/*
- * drivers/serial/ubi32_mailbox.c
- * Ubicom32 On-Chip Mailbox Driver
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/platform_device.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-#include <linux/version.h>
-
-#include <asm/ip5000.h>
-
-#define SERIAL_UBICOM_BAUDRATE 115200
-#define SERIAL_UBICOM_DATA_BIT 8 /* Fixed parameter - do not change */
-#define SERIAL_UBICOM_PAR_BIT 0 /* Fixed parameter - do not change */
-#define SERIAL_UBICOM_STOP_BIT 1 /* Fixed parameter - do not change */
-
-/* UART name and device definitions */
-#define UBI32_MAILBOX_NAME "ttyUM" // XXX
-#define UBI32_MAILBOX_MAJOR 207 // XXX
-#define UBI32_MAILBOX_MINOR 64
-
-#define PORT_UBI32_MAILBOX 1235
-#define NR_PORTS 1
-
-#define get_sclk() 0
-
-struct ubi32_mailbox_port {
- struct uart_port port;
- /*
- * NOTE (rkeller):
- * the uart port is wrapped in another structure in case we need to hold more state than
- * what we can hold in the uart_port.
- * Not sure if we need this, I took over the concept from the blackfin driver.
- */
-} ubi32_mailbox_ports[NR_PORTS];
-
-struct ubi32_mailbox_resource {
- int uart_base_addr;
- int uart_irq;
-} ubi32_mailbox_resource[NR_PORTS] = {
- /*
- * uart_base_addr has to be non-NULL because it is put in the uart_port membase.
- * If membase if null the kernel skips the configuration and our port_type never gets set.
- */
- {ISD_MAILBOX_BASE, ISD_MAILBOX_INT}
-};
-
-static volatile struct ubicom32_isd_mailbox {
- volatile u32_t in;
- volatile u32_t out;
- volatile u32_t status;
-} *ubi32_mailbox = (struct ubicom32_isd_mailbox *)ISD_MAILBOX_BASE;
-
-static void ubi32_mailbox_tx_chars(struct ubi32_mailbox_port *uart);
-
-static void ubi32_mailbox_mctrl_check(struct ubi32_mailbox_port *uart);
-
-#define TRUE 1
-#define FALSE 0
-
-static int mailbox_console_flg = TRUE;
-static int num_timeouts = 0;
-
-/*
- * dummy functions and defined to be able to compile the Blackfin code
- */
-#define UART_GET_LSR(port) (1)
-#define UART_PUT_LSR(port, bits)
-#define UART_CLEAR_LSR(port) (1)
-#define TEMT 1
-#define TFI 1
-#define BI 1
-#define PE 1
-#define OE 1
-#define FE 1
-#define THRE 1
-#define DR 1
-#define UART_GET_LCR(port) (1)
-#define UART_PUT_LCR(port, bits)
-#define SB 1
-#define STB 1
-#define PEN 1
-#define EPS 1
-#define STP 1
-#define WLS(n) 0
-#define UART_GET_IER(port) (1)
-#define UART_SET_IER(port, bits)
-#define UART_CLEAR_IER(port, bits)
-#define ETBEI 0
-#define ERBFI 0
-#define UART_GET_CHAR(port) ubi32_mailbox_get_char()
-#define UART_PUT_CHAR(port, ch) ubi32_mailbox_put_char(ch)
-#define SSYNC()
-#define UART_GET_DLL(port) 0
-#define UART_PUT_DLL(port, ch)
-#define UART_GET_DLH(port) 0
-#define UART_PUT_DLH(port, ch)
-#define UART_GET_GCTL(port) (0)
-#define UART_PUT_GCTL(port, ch)
-#define UCEN 1
-
-/*
- * ubi32_mailbox_get_char_avail()
- */
-static int ubi32_mailbox_get_char_avail(void)
-{
- return !(ubi32_mailbox->status & ISD_MAILBOX_STATUS_IN_EMPTY);
-}
-
-/*
- * ubi32_mailbox_get_char()
- */
-static u32_t ubi32_mailbox_get_char(void)
-{
- if (mailbox_console_flg == TRUE) {
- /*
- * Mailbox console is connected.
- */
- while (ubi32_mailbox->status & ISD_MAILBOX_STATUS_IN_EMPTY);
- return ubi32_mailbox->in & 0xff;
- }
-
- /*
- * Mailbox console was not connected.
- */
- if (ubi32_mailbox->status & ISD_MAILBOX_STATUS_IN_EMPTY) {
- return 0xff;
- }
-
- /*
- * Mailbox console is connecting.
- */
- mailbox_console_flg = TRUE;
- num_timeouts = 0;
- return ubi32_mailbox->in & 0xff;
-}
-
-#define MAILBOX_MAX_ATTEMPTS 1000000
-#define MAILBOX_MAX_TIMEOUTS 5
-/*
- * ubi32_mailbox_put_char()
- */
-static void ubi32_mailbox_put_char(u32_t v)
-{
- /*
- * Wait to be able to output.
- */
- u32_t num_attempts = 0;
-
- if(mailbox_console_flg == TRUE) {
- while(num_attempts++ < MAILBOX_MAX_ATTEMPTS) {
- if(ubi32_mailbox->status & ISD_MAILBOX_STATUS_OUT_EMPTY) {
- break;
- }
- }
-
- /*
- * If timed out more than 5 times on send, mailbox console is disconnected now.
- */
- if (num_attempts > MAILBOX_MAX_ATTEMPTS) {
- if (num_timeouts++ > MAILBOX_MAX_TIMEOUTS) {
- mailbox_console_flg = FALSE;
- }
- }
- }
-
- asm volatile(
- "pipe_flush 0 \n\t"
- "pipe_flush 0 \n\t"
- "pipe_flush 0 \n\t"
- "pipe_flush 0 \n\t"
- "pipe_flush 0 \n\t"
- "pipe_flush 0 \n\t"
- "pipe_flush 0 \n\t"
- );
-
- ubi32_mailbox->out = v & 0xff;
-}
-
-static void ubi32_mailbox_hw_init(struct ubi32_mailbox_port *uart)
-{
-// NOTE: It does not do any good to do these here because we are running on the linux hardware thread,
-// and these have to be called on the ldsr thread.
-// ubicom32_clear_interrupt(ISD_MAILBOX_INT);
-// ubicom32_enable_interrupt(ISD_MAILBOX_INT);
-}
-
-/*
- * interrupts are disabled on entry
- */
-static void ubi32_mailbox_stop_tx(struct uart_port *port)
-{
-// struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-// struct circ_buf *xmit = &uart->port.info->xmit;
-
- while (!(UART_GET_LSR(uart) & TEMT))
- cpu_relax();
-
- /* Clear TFI bit */
- UART_PUT_LSR(uart, TFI);
- UART_CLEAR_IER(uart, ETBEI);
-}
-
-/*
- * port is locked and interrupts are disabled
- */
-static void ubi32_mailbox_start_tx(struct uart_port *port)
-{
- struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-
- UART_SET_IER(uart, ETBEI);
-
- ubi32_mailbox_tx_chars(uart);
-}
-
-/*
- * Interrupts are enabled
- */
-static void ubi32_mailbox_stop_rx(struct uart_port *port)
-{
-// struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
- UART_CLEAR_IER(uart, ERBFI);
-}
-
-/*
- * Set the modem control timer to fire immediately.
- */
-static void ubi32_mailbox_enable_ms(struct uart_port *port)
-{
-}
-
-static void ubi32_mailbox_rx_chars(struct ubi32_mailbox_port *uart)
-{
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
- struct uart_state *state = uart->port.state;
- struct tty_struct *tty = state->port.tty;
-#else
- struct uart_info *info = uart->port.info;
- struct tty_struct *tty = info->port.tty;
-#endif
- unsigned int status, ch, flg;
-
- status = 0; // XXX? UART_GET_LSR(uart);
- UART_CLEAR_LSR(uart);
-
- ch = UART_GET_CHAR(uart);
-
- if(ch == 0xff)
- return;
-
- uart->port.icount.rx++;
-
- if (status & BI) {
- uart->port.icount.brk++;
- if (uart_handle_break(&uart->port))
- goto ignore_char;
- status &= ~(PE | FE);
- }
- if (status & PE)
- uart->port.icount.parity++;
- if (status & OE)
- uart->port.icount.overrun++;
- if (status & FE)
- uart->port.icount.frame++;
-
- status &= uart->port.read_status_mask;
-
- if (status & BI)
- flg = TTY_BREAK;
- else if (status & PE)
- flg = TTY_PARITY;
- else if (status & FE)
- flg = TTY_FRAME;
- else
- flg = TTY_NORMAL;
-
- if (uart_handle_sysrq_char(&uart->port, ch))
- goto ignore_char;
-
- uart_insert_char(&uart->port, status, OE, ch, flg);
-
- ignore_char:
- tty_flip_buffer_push(tty);
-}
-
-static void ubi32_mailbox_tx_chars(struct ubi32_mailbox_port *uart)
-{
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
- struct circ_buf *xmit = &uart->port.state->xmit;
-#else
- struct circ_buf *xmit = &uart->port.info->xmit;
-#endif
-
- if (uart->port.x_char) {
- UART_PUT_CHAR(uart, uart->port.x_char);
- uart->port.icount.tx++;
- uart->port.x_char = 0;
- }
- /*
- * Check the modem control lines before
- * transmitting anything.
- */
- ubi32_mailbox_mctrl_check(uart);
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
- ubi32_mailbox_stop_tx(&uart->port);
- return;
- }
-
- while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) {
- UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- uart->port.icount.tx++;
- SSYNC();
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&uart->port);
-
- if (uart_circ_empty(xmit))
- ubi32_mailbox_stop_tx(&uart->port);
-}
-
-static irqreturn_t ubi32_mailbox_isr(int irq, void *dev_id)
-{
- struct ubi32_mailbox_port *uart = dev_id;
-
- spin_lock(&uart->port.lock);
-
- //XXX?while (UART_GET_LSR(uart) & DR)
-
- /*
- * RX process
- */
- while (ubi32_mailbox_get_char_avail()) {
- ubi32_mailbox_rx_chars(uart);
- }
-
-#if 0
- /*
- * TX process
- */
- if (this_uart.tx_in == this_uart.tx_out) {
- UBICOM32_IO_PORT(SERIAL_UBICOM_PORT)->int_mask &= ~IO_PORTX_INT_SERDES_TXBE;
- } else if (UBICOM32_IO_PORT(SERIAL_UBICOM_PORT)->int_status & IO_PORTX_INT_SERDES_TXBE) {
- uart_ubicom32_send(this_uart.tx_buf[this_uart.tx_out & (SERIAL_UBICOM_BUF_SIZE - 1)]);
- this_uart.tx_out++;
- UBICOM32_IO_PORT(SERIAL_UBICOM_PORT)->int_mask |= IO_PORTX_INT_SERDES_TXBE;
- }
-#endif
-
- spin_unlock(&uart->port.lock);
-
- return IRQ_HANDLED;
-}
-#if 0
-static irqreturn_t ubi32_mailbox_tx_int(int irq, void *dev_id)
-{
- struct ubi32_mailbox_port *uart = dev_id;
-
- spin_lock(&uart->port.lock);
- if (UART_GET_LSR(uart) & THRE)
- ubi32_mailbox_tx_chars(uart);
- spin_unlock(&uart->port.lock);
-
- return IRQ_HANDLED;
-}
-#endif
-
-/*
- * Return TIOCSER_TEMT when transmitter is not busy.
- */
-static unsigned int ubi32_mailbox_tx_empty(struct uart_port *port)
-{
-// struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
- unsigned short lsr;
-
- lsr = UART_GET_LSR(uart);
- if (lsr & TEMT)
- return TIOCSER_TEMT;
- else
- return 0;
-}
-
-static unsigned int ubi32_mailbox_get_mctrl(struct uart_port *port)
-{
- return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-}
-
-static void ubi32_mailbox_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-}
-
-/*
- * Handle any change of modem status signal since we were last called.
- */
-static void ubi32_mailbox_mctrl_check(struct ubi32_mailbox_port *uart)
-{
-}
-
-/*
- * Interrupts are always disabled.
- */
-static void ubi32_mailbox_break_ctl(struct uart_port *port, int break_state)
-{
-// struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
- u16 lcr = UART_GET_LCR(uart);
- if (break_state)
- lcr |= SB;
- else
- lcr &= ~SB;
- UART_PUT_LCR(uart, lcr);
- SSYNC();
-}
-
-static int ubi32_mailbox_startup(struct uart_port *port)
-{
- struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-
- if (request_irq(uart->port.irq, ubi32_mailbox_isr, IRQF_DISABLED,
- "UBI32_MAILBOX", uart)) {
- printk(KERN_NOTICE "Unable to attach Ubicom32 SERDES interrupt\n");
- return -EBUSY;
- }
-
- UART_SET_IER(uart, ERBFI);
- return 0;
-}
-
-static void ubi32_mailbox_shutdown(struct uart_port *port)
-{
- struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-
- free_irq(uart->port.irq, uart);
-}
-
-static void
-ubi32_mailbox_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
-{
- struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
- unsigned long flags;
- unsigned int baud, quot;
- unsigned short val, ier, lsr, lcr = 0;
-
- switch (termios->c_cflag & CSIZE) {
- case CS8:
- lcr = WLS(8);
- break;
- case CS7:
- lcr = WLS(7);
- break;
- case CS6:
- lcr = WLS(6);
- break;
- case CS5:
- lcr = WLS(5);
- break;
- default:
- printk(KERN_ERR "%s: word lengh not supported\n",
- __FUNCTION__);
- }
-
- if (termios->c_cflag & CSTOPB)
- lcr |= STB;
- if (termios->c_cflag & PARENB)
- lcr |= PEN;
- if (!(termios->c_cflag & PARODD))
- lcr |= EPS;
- if (termios->c_cflag & CMSPAR)
- lcr |= STP;
-
- port->read_status_mask = OE;
- if (termios->c_iflag & INPCK)
- port->read_status_mask |= (FE | PE);
- if (termios->c_iflag & (BRKINT | PARMRK))
- port->read_status_mask |= BI;
-
- /*
- * Characters to ignore
- */
- port->ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= FE | PE;
- if (termios->c_iflag & IGNBRK) {
- port->ignore_status_mask |= BI;
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= OE;
- }
-
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- quot = uart_get_divisor(port, baud);
- spin_lock_irqsave(&uart->port.lock, flags);
-
- do {
- lsr = UART_GET_LSR(uart);
- } while (!(lsr & TEMT));
-
- /* Disable UART */
- ier = UART_GET_IER(uart);
- UART_CLEAR_IER(uart, 0xF);
-
- UART_PUT_DLL(uart, quot & 0xFF);
- SSYNC();
- UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
- SSYNC();
-
- UART_PUT_LCR(uart, lcr);
-
- /* Enable UART */
- UART_SET_IER(uart, ier);
-
- val = UART_GET_GCTL(uart);
- val |= UCEN;
- UART_PUT_GCTL(uart, val);
-
- spin_unlock_irqrestore(&uart->port.lock, flags);
-}
-
-static const char *ubi32_mailbox_type(struct uart_port *port)
-{
- struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-
- return uart->port.type == PORT_UBI32_MAILBOX ? "UBI32_MAILBOX" : NULL;
-}
-
-/*
- * Release the memory region(s) being used by 'port'.
- */
-static void ubi32_mailbox_release_port(struct uart_port *port)
-{
-}
-
-/*
- * Request the memory region(s) being used by 'port'.
- */
-static int ubi32_mailbox_request_port(struct uart_port *port)
-{
- return 0;
-}
-
-/*
- * Configure/autoconfigure the port.
- */
-static void ubi32_mailbox_config_port(struct uart_port *port, int flags)
-{
- struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-
- if (flags & UART_CONFIG_TYPE && ubi32_mailbox_request_port(&uart->port) == 0)
- uart->port.type = PORT_UBI32_MAILBOX;
-}
-
-/*
- * Verify the new serial_struct (for TIOCSSERIAL).
- * The only change we allow are to the flags and type, and
- * even then only between PORT_UBI32_MAILBOX and PORT_UNKNOWN
- */
-static int
-ubi32_mailbox_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- return 0;
-}
-
-static struct uart_ops ubi32_mailbox_pops = {
- .tx_empty = ubi32_mailbox_tx_empty,
- .set_mctrl = ubi32_mailbox_set_mctrl,
- .get_mctrl = ubi32_mailbox_get_mctrl,
- .stop_tx = ubi32_mailbox_stop_tx,
- .start_tx = ubi32_mailbox_start_tx,
- .stop_rx = ubi32_mailbox_stop_rx,
- .enable_ms = ubi32_mailbox_enable_ms,
- .break_ctl = ubi32_mailbox_break_ctl,
- .startup = ubi32_mailbox_startup,
- .shutdown = ubi32_mailbox_shutdown,
- .set_termios = ubi32_mailbox_set_termios,
- .type = ubi32_mailbox_type,
- .release_port = ubi32_mailbox_release_port,
- .request_port = ubi32_mailbox_request_port,
- .config_port = ubi32_mailbox_config_port,
- .verify_port = ubi32_mailbox_verify_port,
-};
-
-static void __init ubi32_mailbox_init_ports(void)
-{
- static int first = 1;
- int i;
-
- if (!first)
- return;
- first = 0;
-
- for (i = 0; i < NR_PORTS; i++) {
- ubi32_mailbox_ports[i].port.uartclk = get_sclk();
- ubi32_mailbox_ports[i].port.ops = &ubi32_mailbox_pops;
- ubi32_mailbox_ports[i].port.line = i;
- ubi32_mailbox_ports[i].port.iotype = UPIO_MEM;
- ubi32_mailbox_ports[i].port.membase =
- (void __iomem *)ubi32_mailbox_resource[i].uart_base_addr;
- ubi32_mailbox_ports[i].port.mapbase =
- ubi32_mailbox_resource[i].uart_base_addr;
- ubi32_mailbox_ports[i].port.irq =
- ubi32_mailbox_resource[i].uart_irq;
- ubi32_mailbox_ports[i].port.flags = UPF_BOOT_AUTOCONF;
- spin_lock_init(&ubi32_mailbox_ports[i].port.lock);
-
- ubi32_mailbox_hw_init(&ubi32_mailbox_ports[i]);
- }
-
-}
-
-#ifdef CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE
-/*
- * If the port was already initialised (eg, by a boot loader),
- * try to determine the current setup.
- */
-static void __init
-ubi32_mailbox_console_get_options(struct ubi32_mailbox_port *uart, int *baud,
- int *parity, int *bits)
-{
- unsigned short status;
-
- status = UART_GET_IER(uart) & (ERBFI | ETBEI);
- if (status == (ERBFI | ETBEI)) {
- /* ok, the port was enabled */
- unsigned short lcr;
- unsigned short dlh, dll;
-
- lcr = UART_GET_LCR(uart);
-
- *parity = 'n';
- if (lcr & PEN) {
- if (lcr & EPS)
- *parity = 'e';
- else
- *parity = 'o';
- }
- switch (lcr & 0x03) {
- case 0: *bits = 5; break;
- case 1: *bits = 6; break;
- case 2: *bits = 7; break;
- case 3: *bits = 8; break;
- }
-
- dll = UART_GET_DLL(uart);
- dlh = UART_GET_DLH(uart);
-
- *baud = get_sclk() / (16*(dll | dlh << 8));
- }
- pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __FUNCTION__, *baud, *parity, *bits);
-}
-#endif
-
-#if defined(CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
-static struct uart_driver ubi32_mailbox_reg;
-
-static int __init
-ubi32_mailbox_console_setup(struct console *co, char *options)
-{
- struct ubi32_mailbox_port *uart;
-# ifdef CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE
- int baud = SERIAL_UBICOM_BAUDRATE;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-# endif
-
- /*
- * Check whether an invalid uart number has been specified, and
- * if so, search for the first available port that does have
- * console support.
- */
- if (co->index == -1 || co->index >= NR_PORTS)
- co->index = 0;
- uart = &ubi32_mailbox_ports[co->index];
-
-# ifdef CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- else
- ubi32_mailbox_console_get_options(uart, &baud, &parity, &bits);
-
- //JB return uart_set_options(&uart->port, co, baud, parity, bits, flow);
- return 0;
-# else
- return 0;
-# endif
-}
-#endif /* defined (CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE) ||
- defined (CONFIG_EARLY_PRINTK) */
-
-#ifdef CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE
-static void ubi32_mailbox_console_putchar(struct uart_port *port, int ch)
-{
-// struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
- while (!(UART_GET_LSR(uart) & THRE))
- barrier();
- UART_PUT_CHAR(uart, ch);
- SSYNC();
-}
-
-/*
- * Interrupts are disabled on entering
- */
-static void
-ubi32_mailbox_console_write(struct console *co, const char *s, unsigned int count)
-{
- struct ubi32_mailbox_port *uart = &ubi32_mailbox_ports[co->index];
- unsigned long flags = 0;
-
- spin_lock_irqsave(&uart->port.lock, flags);
- uart_console_write(&uart->port, s, count, ubi32_mailbox_console_putchar);
- spin_unlock_irqrestore(&uart->port.lock, flags);
-
-}
-
-static struct console ubi32_mailbox_console = {
- .name = UBI32_MAILBOX_NAME,
- .write = ubi32_mailbox_console_write,
- .device = uart_console_device,
- .setup = ubi32_mailbox_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &ubi32_mailbox_reg,
-};
-
-static int __init ubi32_mailbox_console_init(void)
-{
- ubi32_mailbox_init_ports();
- register_console(&ubi32_mailbox_console);
- return 0;
-}
-console_initcall(ubi32_mailbox_console_init);
-
-#define UBI32_MAILBOX_CONSOLE &ubi32_mailbox_console
-#else
-#define UBI32_MAILBOX_CONSOLE NULL
-#endif /* CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE */
-
-
-#ifdef CONFIG_EARLY_PRINTK
-static __init void ubi32_mailbox_early_putc(struct uart_port *port, int ch)
-{
- UART_PUT_CHAR(uart, ch);
-}
-
-static __init void ubi32_mailbox_early_write(struct console *con, const char *s,
- unsigned int n)
-{
- struct ubi32_mailbox_port *uart = &ubi32_mailbox_ports[con->index];
- unsigned int i;
-
- for (i = 0; i < n; i++, s++) {
- if (*s == '\n')
- ubi32_mailbox_early_putc(&uart->port, '\r');
- ubi32_mailbox_early_putc(&uart->port, *s);
- }
-}
-
-static struct __init console ubi32_mailbox_early_console = {
- .name = "early_UM",
- .write = ubi32_mailbox_early_write,
- .device = uart_console_device,
- .flags = CON_PRINTBUFFER,
- .setup = ubi32_mailbox_console_setup,
- .index = -1,
- .data = &ubi32_mailbox_reg,
-};
-
-/*
- * XXX Unused in our driver. Need to find out what the termios initialization is good/needed for.
- */
-struct console __init *ubi32_mailbox_early_init(unsigned int port,
- unsigned int cflag)
-{
- struct ubi32_mailbox_port *uart;
- struct ktermios t;
-
- if (port == -1 || port >= NR_PORTS)
- port = 0;
- ubi32_mailbox_init_ports();
- ubi32_mailbox_early_console.index = port;
- uart = &ubi32_mailbox_ports[port];
- t.c_cflag = cflag;
- t.c_iflag = 0;
- t.c_oflag = 0;
- t.c_lflag = ICANON;
- t.c_line = port;
- ubi32_mailbox_set_termios(&uart->port, &t, &t);
- return &ubi32_mailbox_early_console;
-}
-
-#endif /* CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE */
-
-static struct uart_driver ubi32_mailbox_reg = {
- .owner = THIS_MODULE,
- .driver_name = "ubi32_mailbox",
- .dev_name = UBI32_MAILBOX_NAME,
- .major = UBI32_MAILBOX_MAJOR,
- .minor = UBI32_MAILBOX_MINOR,
- .nr = NR_PORTS,
- .cons = UBI32_MAILBOX_CONSOLE,
-};
-
-static int ubi32_mailbox_suspend(struct platform_device *dev, pm_message_t state)
-{
- struct ubi32_mailbox_port *uart = platform_get_drvdata(dev);
-
- if (uart)
- uart_suspend_port(&ubi32_mailbox_reg, &uart->port);
-
- return 0;
-}
-
-static int ubi32_mailbox_resume(struct platform_device *dev)
-{
- struct ubi32_mailbox_port *uart = platform_get_drvdata(dev);
-
- if (uart)
- uart_resume_port(&ubi32_mailbox_reg, &uart->port);
-
- return 0;
-}
-
-static int ubi32_mailbox_probe(struct platform_device *dev)
-{
- struct resource *res = dev->resource;
- int i;
-
- for (i = 0; i < dev->num_resources; i++, res++)
- if (res->flags & IORESOURCE_MEM)
- break;
-
- if (i < dev->num_resources) {
- for (i = 0; i < NR_PORTS; i++, res++) {
- if (ubi32_mailbox_ports[i].port.mapbase != res->start)
- continue;
- ubi32_mailbox_ports[i].port.dev = &dev->dev;
- uart_add_one_port(&ubi32_mailbox_reg, &ubi32_mailbox_ports[i].port);
- platform_set_drvdata(dev, &ubi32_mailbox_ports[i]);
- }
- }
-
- return 0;
-}
-
-static int ubi32_mailbox_remove(struct platform_device *pdev)
-{
- struct ubi32_mailbox_port *uart = platform_get_drvdata(pdev);
-
- platform_set_drvdata(pdev, NULL);
-
- if (uart)
- uart_remove_one_port(&ubi32_mailbox_reg, &uart->port);
-
- return 0;
-}
-
-static struct platform_driver ubi32_mailbox_driver = {
- .probe = ubi32_mailbox_probe,
- .remove = ubi32_mailbox_remove,
- .suspend = ubi32_mailbox_suspend,
- .resume = ubi32_mailbox_resume,
- .driver = {
- .name = "ubi32-mbox",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init ubi32_mailbox_init(void)
-{
- int ret;
-
- pr_info("Serial: Ubicom32 mailbox serial driver.\n");
-
- mailbox_console_flg = TRUE;
- num_timeouts = 0;
- ubi32_mailbox_init_ports();
-
- ret = uart_register_driver(&ubi32_mailbox_reg);
- if (ret == 0) {
- ret = platform_driver_register(&ubi32_mailbox_driver);
- if (ret) {
- pr_debug("uart register failed\n");
- uart_unregister_driver(&ubi32_mailbox_reg);
- }
- }
-
- /*
- * XXX HACK: currently probe does not get called, but the port needs to be added to work.
- */
- uart_add_one_port(&ubi32_mailbox_reg, &ubi32_mailbox_ports[0].port);
- return ret;
-}
-
-static void __exit ubi32_mailbox_exit(void)
-{
- platform_driver_unregister(&ubi32_mailbox_driver);
- uart_unregister_driver(&ubi32_mailbox_reg);
-}
-
-module_init(ubi32_mailbox_init);
-module_exit(ubi32_mailbox_exit);
-
-MODULE_ALIAS_CHARDEV_MAJOR(UBI32_MAILBOX_MAJOR);
-MODULE_ALIAS("platform:ubi32_mailbox");
+++ /dev/null
-/*
- * drivers/serial/ubi32_serdes.c
- * Ubicom32 On-Chip Serial Driver
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/platform_device.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-
-#include <asm/ip5000.h>
-#include <asm/ubicom32suart.h>
-
-
-#define SERIAL_UBICOM_PIN_RXD (1 << 0)
-#define SERIAL_UBICOM_PIN_TXD (1 << 6)
-#define SERIAL_UBICOM_CTL0 0x8b300000
-#define SERIAL_UBICOM_CTL1 0x00000009
-
-#define SERIAL_UBICOM_DATA_BIT 8 /* Fixed parameter - do not change */
-#define SERIAL_UBICOM_PAR_BIT 0 /* Fixed parameter - do not change */
-#define SERIAL_UBICOM_STOP_BIT 1 /* Fixed parameter - do not change */
-
-/* UART name and device definitions */
-#define UBI32_SERDES_NAME "ttyUS" // XXX
-#define UBI32_SERDES_MAJOR 206 // XXX
-#define UBI32_SERDES_MINOR 64 // XXX
-
-#define PORT_UBI32_SERDES 1234
-#define NR_PORTS 1
-
-struct uart_port ubi32_serdes_ports[NR_PORTS];
-
-struct ubi32_serdes_resource {
- void *uart_base_addr;
- int uart_irq;
- int uart_clock;
-} ubi32_serdes_resource[NR_PORTS] = {
- /*
- * Get params from kernel command line (required for early printk)
- * or from platform resources.
- */
- {0, 0, 0}
-};
-
-/*
- * Can get overridden by 'serdes=' kernel command line.
- */
-static int ubi32_serdes_default_baud_rate = 115200;
-
-
-#define IO_PORT(port) ((struct ubicom32_io_port *)port->membase)
-#define IO_PORT_INT_STATUS(port) (IO_PORT(port)->int_status)
-#define IO_PORT_INT_MASK(port) (IO_PORT(port)->int_mask)
-#define IO_PORT_INT_CLR(port) (IO_PORT(port)->int_clr)
-
-
-/*
- * ubi32_serdes_get_char()
- */
-static u8_t ubi32_serdes_get_char(struct ubicom32_io_port *io_port)
-{
- /*
- * Read from hardware (forced 32-bit atomic read).
- */
- u32_t data = 0;
-
- if ( io_port ) {
- io_port->int_clr = IO_PORTX_INT_SERDES_RXBF;
- asm volatile (
- "move.4 %0, %1 \n\t"
- : "=r" (data)
- : "m" (*(u32_t *)&(io_port->rx_fifo))
- );
- }
-
- return (u8_t)(data & 0x000000ff);
-}
-
-/*
- * ubi32_serdes_put_char()
- */
-static void ubi32_serdes_put_char(struct ubicom32_io_port *io_port, u8_t c)
-{
- u32_t data = 0x0000fe00 | (c << 1);
-
- if ( io_port ) {
- /*
- * Fixed data format:
- * [LSB]1 start bit - 8 data bits - no parity - 1 stop bit[MSB]
- */
- io_port->int_clr = IO_PORTX_INT_SERDES_TXBE;
- io_port->ctl2 = data;
- io_port->int_set = IO_PORTX_INT_SERDES_TXBUF_VALID;
- }
-}
-
-static void ubi32_serdes_hw_init(struct uart_port *port, int baud)
-{
- struct ubicom32_io_port *io_port = IO_PORT(port);
-
- if ( io_port ) {
- /*
- * Put port functions 1-4 into reset state.
- * Function 0 (GPIO) does not need or have a reset bit.
- *
- * Select SERDES function for restart below.
- */
- io_port->function =
- IO_FUNC_FUNCTION_RESET(1) | IO_FUNC_FUNCTION_RESET(2) |
- IO_FUNC_FUNCTION_RESET(3) | IO_FUNC_FUNCTION_RESET(4) |
- IO_PORTX_FUNC_SERDES;
-
- /*
- * Configure SERDES baudrate
- */
- if ( baud == 0 ) {
- baud = ubi32_serdes_default_baud_rate;
- }
-
- io_port->ctl0 =
- SERIAL_UBICOM_CTL0 |
- ((port->uartclk / (16 * baud)) - 1);
-
- io_port->ctl1 =
- SERIAL_UBICOM_CTL1;
-
- /*
- * don't interrupt until startup and start_tx
- */
- io_port->int_mask = 0;
-
- /*
- * Set TXD pin output, RXD input and prevent GPIO
- * override on the TXD & RXD pins
- */
- io_port->gpio_ctl &= ~SERIAL_UBICOM_PIN_RXD;
- io_port->gpio_ctl |= SERIAL_UBICOM_PIN_TXD;
- io_port->gpio_mask &= ~(SERIAL_UBICOM_PIN_RXD | SERIAL_UBICOM_PIN_TXD);
-
- /*
- * Restart (un-reset) the port's SERDES function.
- */
- io_port->function &= ~(IO_FUNC_FUNCTION_RESET(IO_PORTX_FUNC_SERDES));
- }
-}
-
-#define ULITE_STATUS_RXVALID IO_PORTX_INT_SERDES_RXBF
-#define ULITE_STATUS_OVERRUN 0
-#define ULITE_STATUS_FRAME 0
-#define ULITE_STATUS_PARITY 0
-#define ULITE_STATUS_TXEMPTY IO_PORTX_INT_SERDES_TXBE
-#define ULITE_STATUS_TXFULL 0
-
-static int ubi32_serdes_receive(struct uart_port *port, int stat)
-{
- struct tty_struct *tty = port->info->port.tty;
- unsigned char ch = 0;
- char flag = TTY_NORMAL;
-
- if ((stat & (ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
- | ULITE_STATUS_FRAME)) == 0)
- return 0;
-
- /* stats */
- if (stat & ULITE_STATUS_RXVALID) {
- port->icount.rx++;
- ch = ubi32_serdes_get_char((struct ubicom32_io_port *)port->membase);
-
- if (stat & ULITE_STATUS_PARITY)
- port->icount.parity++;
- }
-
- if (stat & ULITE_STATUS_OVERRUN)
- port->icount.overrun++;
-
- if (stat & ULITE_STATUS_FRAME)
- port->icount.frame++;
-
-
- /* drop byte with parity error if IGNPAR specificed */
- if (stat & port->ignore_status_mask & ULITE_STATUS_PARITY)
- stat &= ~ULITE_STATUS_RXVALID;
-
- stat &= port->read_status_mask;
-
- if (stat & ULITE_STATUS_PARITY)
- flag = TTY_PARITY;
-
- stat &= ~port->ignore_status_mask;
-
- if (stat & ULITE_STATUS_RXVALID)
- tty_insert_flip_char(tty, ch, flag);
-
- if (stat & ULITE_STATUS_FRAME)
- tty_insert_flip_char(tty, 0, TTY_FRAME);
-
- if (stat & ULITE_STATUS_OVERRUN)
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-
- return 1;
-}
-
-/*
- * interrupts are disabled on entry
- */
-static void ubi32_serdes_stop_tx(struct uart_port *port)
-{
- IO_PORT_INT_MASK(port) = IO_PORT_INT_MASK(port) & ~IO_PORTX_INT_SERDES_TXBE;
-}
-
-static int ubi32_serdes_transmit(struct uart_port *port, int stat)
-{
- struct circ_buf *xmit = &port->info->xmit;
-
- if (!(stat & IO_PORTX_INT_SERDES_TXBE))
- return 0;
-
- if (port->x_char) {
- ubi32_serdes_put_char(IO_PORT(port), port->x_char);
- port->x_char = 0;
- port->icount.tx++;
- return 1;
- }
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- ubi32_serdes_stop_tx(port);
- return 0;
- }
-
- ubi32_serdes_put_char(IO_PORT(port), xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
- port->icount.tx++;
-
- /* wake up */
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- ubi32_serdes_stop_tx(port);
-
- return 1;
-}
-
-/*
- * port is locked and interrupts are disabled
- */
-static void ubi32_serdes_start_tx(struct uart_port *port)
-{
- IO_PORT_INT_MASK(port) = IO_PORT_INT_MASK(port) | IO_PORTX_INT_SERDES_TXBE;
- ubi32_serdes_transmit(port, IO_PORT_INT_STATUS(port));
-}
-
-/*
- * Interrupts are enabled
- */
-static void ubi32_serdes_stop_rx(struct uart_port *port)
-{
- /* don't forward any more data (like !CREAD) */
- port->ignore_status_mask = IO_PORTX_INT_SERDES_RXBF;
-}
-
-/*
- * Set the modem control timer to fire immediately.
- */
-static void ubi32_serdes_enable_ms(struct uart_port *port)
-{
- /* N/A */
-}
-
-static irqreturn_t ubi32_serdes_isr(int irq, void *dev_id)
-{
- struct uart_port *port = dev_id;
- int busy;
-
- spin_lock(&port->lock);
-
- do {
- int stat = IO_PORT_INT_STATUS(port);
- busy = ubi32_serdes_receive(port, stat);
- busy |= ubi32_serdes_transmit(port, stat);
- } while (busy);
-
- tty_flip_buffer_push(port->info->port.tty);
-
- spin_unlock(&port->lock);
-
- return IRQ_HANDLED;
-}
-
-/*
- * Return TIOCSER_TEMT when transmitter is not busy.
- */
-static unsigned int ubi32_serdes_tx_empty(struct uart_port *port)
-{
- unsigned long flags;
- unsigned int ret;
-
- spin_lock_irqsave(&port->lock, flags);
- ret = IO_PORT_INT_STATUS(port);
- spin_unlock_irqrestore(&port->lock, flags);
-
- return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0;
-}
-
-static unsigned int ubi32_serdes_get_mctrl(struct uart_port *port)
-{
- return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-}
-
-static void ubi32_serdes_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
- /* N/A */
-}
-
-/*
- * Interrupts are always disabled.
- */
-static void ubi32_serdes_break_ctl(struct uart_port *port, int break_state)
-{
- /* N/A */
-}
-
-static int ubi32_serdes_startup(struct uart_port *port)
-{
- if (request_irq(port->irq, ubi32_serdes_isr, IRQF_DISABLED,
- "UBI32_SERDES", port)) {
- printk(KERN_NOTICE "Unable to attach port interrupt\n");
- return -EBUSY;
- }
-
- IO_PORT_INT_CLR(port) = IO_PORTX_INT_SERDES_RXBF;
- IO_PORT_INT_MASK(port) = IO_PORTX_INT_SERDES_RXBF;
- return 0;
-}
-
-static void ubi32_serdes_shutdown(struct uart_port *port)
-{
- struct ubi32_serdes_port *uart = (struct ubi32_serdes_port *)port;
-
- IO_PORT_INT_MASK(port) = 0;
- free_irq(port->irq, uart);
-}
-
-static void
-ubi32_serdes_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
-{
- unsigned long flags;
- unsigned int baud;
-
- spin_lock_irqsave(&port->lock, flags);
-
- port->read_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
- | ULITE_STATUS_TXFULL;
-
- if (termios->c_iflag & INPCK)
- port->read_status_mask |=
- ULITE_STATUS_PARITY | ULITE_STATUS_FRAME;
-
- port->ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= ULITE_STATUS_PARITY
- | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
-
- /* ignore all characters if CREAD is not set */
- if ((termios->c_cflag & CREAD) == 0)
- port->ignore_status_mask |=
- ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
- | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
-
- /* update timeout */
- baud = uart_get_baud_rate(port, termios, old, 0, 460800);
- uart_update_timeout(port, termios->c_cflag, baud);
-
- IO_PORT(port)->ctl0 = SERIAL_UBICOM_CTL0 |
- ((port->uartclk / (16 * baud)) - 1);
-
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static const char *ubi32_serdes_type(struct uart_port *port)
-{
- return port->type == PORT_UBI32_SERDES ? "UBI32_SERDES" : NULL;
-}
-
-/*
- * Release the memory region(s) being used by 'port'.
- */
-static void ubi32_serdes_release_port(struct uart_port *port)
-{
-}
-
-/*
- * Request the memory region(s) being used by 'port'.
- */
-static int ubi32_serdes_request_port(struct uart_port *port)
-{
- return 0;
-}
-
-/*
- * Configure/autoconfigure the port.
- */
-static void ubi32_serdes_config_port(struct uart_port *port, int flags)
-{
- if (flags & UART_CONFIG_TYPE &&
- ubi32_serdes_request_port(port) == 0)
- port->type = PORT_UBI32_SERDES;
-}
-
-/*
- * Verify the new serial_struct (for TIOCSSERIAL).
- * The only change we allow are to the flags and type, and
- * even then only between PORT_UBI32_SERDES and PORT_UNKNOWN
- */
-static int
-ubi32_serdes_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- return 0;
-}
-
-static struct uart_ops ubi32_serdes_pops = {
- .tx_empty = ubi32_serdes_tx_empty,
- .set_mctrl = ubi32_serdes_set_mctrl,
- .get_mctrl = ubi32_serdes_get_mctrl,
- .stop_tx = ubi32_serdes_stop_tx,
- .start_tx = ubi32_serdes_start_tx,
- .stop_rx = ubi32_serdes_stop_rx,
- .enable_ms = ubi32_serdes_enable_ms,
- .break_ctl = ubi32_serdes_break_ctl,
- .startup = ubi32_serdes_startup,
- .shutdown = ubi32_serdes_shutdown,
- .set_termios = ubi32_serdes_set_termios,
- .type = ubi32_serdes_type,
- .release_port = ubi32_serdes_release_port,
- .request_port = ubi32_serdes_request_port,
- .config_port = ubi32_serdes_config_port,
- .verify_port = ubi32_serdes_verify_port,
-};
-
-static void __init ubi32_serdes_init_ports(void)
-{
- int i;
-
- for (i = 0; i < NR_PORTS; i++) {
- ubi32_serdes_ports[i].uartclk = ubi32_serdes_resource[i].uart_clock;
- ubi32_serdes_ports[i].ops = &ubi32_serdes_pops;
- ubi32_serdes_ports[i].line = i;
- ubi32_serdes_ports[i].iotype = UPIO_MEM;
- ubi32_serdes_ports[i].membase =
- (void __iomem *)ubi32_serdes_resource[i].uart_base_addr;
- ubi32_serdes_ports[i].mapbase =
- (resource_size_t)ubi32_serdes_resource[i].uart_base_addr;
- ubi32_serdes_ports[i].irq =
- ubi32_serdes_resource[i].uart_irq;
- ubi32_serdes_ports[i].flags = UPF_BOOT_AUTOCONF;
-
- ubi32_serdes_hw_init(&ubi32_serdes_ports[i], 0);
- }
-
-}
-
-#ifdef CONFIG_SERIAL_UBI32_SERDES_CONSOLE
-/*
- * If the port was already initialised (eg, by a boot loader),
- * try to determine the current setup.
- */
-static void __init
-ubi32_serdes_console_get_options(struct uart_port *port, int *baud)
-{
- u32 round_to = 1200;
- u32 real_baud;
-
- /*
- * We might get called before platform init and with no
- * kernel command line options, so port might be NULL.
- */
- *baud = ubi32_serdes_default_baud_rate;;
- if ( IO_PORT(port) == 0 )
- return;
-
- real_baud = port->uartclk
- / (16 * ((IO_PORT(port)->ctl0 & ~SERIAL_UBICOM_CTL0) + 1));
-
- *baud = ((real_baud + round_to - 1) / round_to) * round_to;
-
- pr_debug("%s:baud = %d, real_baud = %d\n", __FUNCTION__, *baud, real_baud);
-}
-#endif
-
-#if defined(CONFIG_SERIAL_UBI32_SERDES_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
-static struct uart_driver ubi32_serdes_reg;
-
-static int __init
-ubi32_serdes_console_setup(struct console *co, char *options)
-{
- struct uart_port *port;
-#ifdef CONFIG_SERIAL_UBI32_SERDES_CONSOLE
- int baud = ubi32_serdes_default_baud_rate;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-#endif
-
- /*
- * Check whether an invalid uart number has been specified, and
- * if so, search for the first available port that does have
- * console support.
- */
- if (co->index == -1 || co->index >= NR_PORTS)
- co->index = 0;
- port = &ubi32_serdes_ports[co->index];
-
-#ifdef CONFIG_SERIAL_UBI32_SERDES_CONSOLE
- if (options) {
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- ubi32_serdes_hw_init(port, baud);
- }
- else
- ubi32_serdes_console_get_options(port, &baud);
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-#else
- return 0;
-#endif
-}
-#endif /* defined (CONFIG_SERIAL_UBI32_SERDES_CONSOLE) ||
- defined (CONFIG_EARLY_PRINTK) */
-
-#ifdef CONFIG_SERIAL_UBI32_SERDES_CONSOLE
-static void
-ubi32_serdes_console_putchar(struct uart_port *port, int ch)
-{
- if ( IO_PORT(port) ) {
- while (!(IO_PORT_INT_STATUS(port) & IO_PORTX_INT_SERDES_TXBE))
- barrier();
- ubi32_serdes_put_char(IO_PORT(port), ch);
- }
-}
-
-/*
- * Interrupts are disabled on entering
- */
-static void
-ubi32_serdes_console_write(struct console *co, const char *s, unsigned int count)
-{
- struct uart_port *port = &ubi32_serdes_ports[co->index];
- unsigned long flags = 0;
-
- spin_lock_irqsave(&port->lock, flags);
- uart_console_write(port, s, count, ubi32_serdes_console_putchar);
- spin_unlock_irqrestore(&port->lock, flags);
-
-}
-
-static struct console ubi32_serdes_console = {
- .name = UBI32_SERDES_NAME,
- .write = ubi32_serdes_console_write,
- .device = uart_console_device,
- .setup = ubi32_serdes_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &ubi32_serdes_reg,
-};
-
-static int __init ubi32_serdes_console_init(void)
-{
- ubi32_serdes_init_ports();
- register_console(&ubi32_serdes_console);
- return 0;
-}
-console_initcall(ubi32_serdes_console_init);
-
-#define UBI32_SERDES_CONSOLE &ubi32_serdes_console
-#else
-#define UBI32_SERDES_CONSOLE NULL
-#endif /* CONFIG_SERIAL_UBI32_SERDES_CONSOLE */
-
-
-#ifdef CONFIG_EARLY_PRINTK
-static __init void ubi32_serdes_early_putc(struct uart_port *port, int ch)
-{
- unsigned timeout = 0xffff;
-
- while ((!(IO_PORT_INT_STATUS(port) & IO_PORTX_INT_SERDES_TXBE)) && --timeout)
- cpu_relax();
- ubi32_serdes_put_char(IO_PORT(port), ch);
-}
-
-static __init void ubi32_serdes_early_write(struct console *con, const char *s,
- unsigned int n)
-{
- struct uart_port *port = &ubi32_serdes_ports[con->index];
- unsigned int i;
-
- for (i = 0; i < n; i++, s++) {
- if (*s == '\n')
- ubi32_serdes_early_putc(port, '\r');
- ubi32_serdes_early_putc(port, *s);
- }
-}
-
-static struct __init console ubi32_serdes_early_console = {
- .name = "early_US",
- .write = ubi32_serdes_early_write,
- .device = uart_console_device,
- .flags = CON_PRINTBUFFER,
- .setup = ubi32_serdes_console_setup,
- .index = -1,
- .data = &ubi32_serdes_reg,
-};
-
-/*
- * XXX Unused in our driver. Need to find out what the termios initialization is good/needed for.
- */
-struct console __init *ubi32_serdes_early_init(unsigned int port_index,
- unsigned int cflag)
-{
- struct uart_port *uart;
- struct ktermios t;
-
- if (port_index == -1 || port_index >= NR_PORTS)
- port_index = 0;
- ubi32_serdes_init_ports();
- ubi32_serdes_early_console.index = port_index;
- uart = &ubi32_serdes_ports[port_index];
- t.c_cflag = cflag;
- t.c_iflag = 0;
- t.c_oflag = 0;
- t.c_lflag = ICANON;
- t.c_line = port_index;
- ubi32_serdes_set_termios(uart, &t, &t);
- return &ubi32_serdes_early_console;
-}
-
-#endif /* CONFIG_SERIAL_UBI32_SERDES_CONSOLE */
-
-static struct uart_driver ubi32_serdes_reg = {
- .owner = THIS_MODULE,
- .driver_name = "ubi32_serdes",
- .dev_name = UBI32_SERDES_NAME,
- .major = UBI32_SERDES_MAJOR,
- .minor = UBI32_SERDES_MINOR,
- .nr = NR_PORTS,
- .cons = UBI32_SERDES_CONSOLE,
-};
-
-static int ubi32_serdes_suspend(struct platform_device *dev, pm_message_t state)
-{
- struct uart_port *port = platform_get_drvdata(dev);
-
- if (port)
- uart_suspend_port(&ubi32_serdes_reg, port);
-
- return 0;
-}
-
-static int ubi32_serdes_resume(struct platform_device *dev)
-{
- struct uart_port *port = platform_get_drvdata(dev);
-
- if (port)
- uart_resume_port(&ubi32_serdes_reg, port);
-
- return 0;
-}
-
-static int ubi32_serdes_probe(struct platform_device *dev)
-{
- struct resource *res = dev->resource;
- int i;
-
- for (i = 0; i < dev->num_resources; i++, res++) {
- if (res->flags & IORESOURCE_MEM) {
- ubi32_serdes_resource[0].uart_base_addr = (void *) res->start;
- }
- else if (res->flags & IORESOURCE_IRQ) {
- ubi32_serdes_resource[0].uart_irq = res->start;
- }
- else if (res->flags & UBICOM32_SUART_IORESOURCE_CLOCK) {
- ubi32_serdes_resource[0].uart_clock = res->start;
- }
- }
-
- ubi32_serdes_init_ports();
-
- return 0;
-}
-
-static int ubi32_serdes_remove(struct platform_device *pdev)
-{
- struct uart_port *port = platform_get_drvdata(pdev);
-
- platform_set_drvdata(pdev, NULL);
-
- if (port)
- uart_remove_one_port(&ubi32_serdes_reg, port);
-
- return 0;
-}
-
-static struct platform_driver ubi32_serdes_driver = {
- .remove = ubi32_serdes_remove,
- .suspend = ubi32_serdes_suspend,
- .resume = ubi32_serdes_resume,
- .driver = {
- .name = "ubicom32suart",
- .owner = THIS_MODULE,
- },
-};
-
-
-#ifndef MODULE
-/*
- * Called at boot time.
- *
- * You can specify IO base, IRQ, and clock for the serdes serial port
- * using kernel command line "serdes=0xiobase,irq,clock". Values
- * specified will be overwritten by platform device data, if present.
- */
-static int __init ubi32_serdes_setup(char *str)
-{
-#define N_PARMS (4+1)
- int ints[N_PARMS];
- int i;
-
- str = get_options(str, ARRAY_SIZE(ints), ints);
-
- for (i = 0; i < N_PARMS; i++) {
- if (i < ints[0]) {
- if (i == 0) {
- ubi32_serdes_resource[0].uart_base_addr = (void *) ints[i+1];
- }
- else if (i == 1) {
- ubi32_serdes_resource[0].uart_irq = ints[i+1];
- }
- else if (i == 2) {
- ubi32_serdes_resource[0].uart_clock = ints[i+1];
- }
- else if (i == 3) {
- ubi32_serdes_default_baud_rate = ints[i+1];
- }
- }
- }
- return 1;
-}
-
-__setup("serdes=", ubi32_serdes_setup);
-#endif
-
-static int __init ubi32_serdes_init(void)
-{
- int ret;
-
- pr_info("Serial: Ubicom32 serdes uart serial driver\n");
-
- ret = platform_driver_probe(&ubi32_serdes_driver, ubi32_serdes_probe);
- if (ret != 0) {
- printk(KERN_INFO "serdes platform_driver_probe() failed: %d\n", ret);
- return ret;
- }
-
- ubi32_serdes_init_ports();
-
- ret = uart_register_driver(&ubi32_serdes_reg);
- if ( ret == 0 ) {
- ret = uart_add_one_port(&ubi32_serdes_reg, &ubi32_serdes_ports[0]);
- if ( ret != 0 ) {
- uart_unregister_driver(&ubi32_serdes_reg);
- }
- }
-
- return ret;
-}
-
-static void __exit ubi32_serdes_exit(void)
-{
- platform_driver_unregister(&ubi32_serdes_driver);
- uart_unregister_driver(&ubi32_serdes_reg);
-}
-
-module_init(ubi32_serdes_init);
-module_exit(ubi32_serdes_exit);
-
-MODULE_AUTHOR("Rainer Keller <rkeller@ubicom.com>");
-MODULE_DESCRIPTION("Ubicom generic serial port driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV_MAJOR(UBI32_SERDES_MAJOR);
-MODULE_ALIAS("platform:ubi32_serdes");
+++ /dev/null
-/*
- * drivers/serial/ubi32_uarttio.c
- * Ubicom32 Serial Virtual Peripherial Driver
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/platform_device.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-
-#include <asm/ip5000.h>
-#include <asm/gpio.h>
-#include <asm/thread.h>
-#include <asm/uart_tio.h>
-
-#define DRIVER_NAME "ubi32_uarttio"
-
-/*
- * For storing the module parameters.
- */
-#define UBI32_UARTTIO_MAX_PARAM_LEN 80
-static char utio_ports_param[UBI32_UARTTIO_MAX_PARAM_LEN];
-
-/*
- * UART name and device definitions
- */
-#define UBI32_UARTTIO_NAME "ttyUV" // XXX
-#define UBI32_UARTTIO_MAJOR 206 // XXX
-#define UBI32_UARTTIO_MINOR 64 // XXX
-
-/*
- * The following structures are allocated statically because the
- * memory allocation subsystem is not initialized this early on
- */
-
-/*
- * Per port structure
- */
-struct ubi32_uarttio_port {
- struct uarttio_uart *uart;
- unsigned int tx_pin;
- unsigned int rx_pin;
-
- struct uart_port port;
-
- u8_t added;
-
- /*
- * If this value is set, the port has had its direction set already
- */
- u8_t port_init;
-};
-static struct ubi32_uarttio_port uarttio_ports[CONFIG_SERIAL_UBI32_UARTTIO_NR_UARTS];
-
-/*
- * Number of ports currently initialized
- */
-static int uarttio_nports;
-
-/*
- * Per device structure
- */
-struct ubi32_uarttio_instance {
- struct uarttio_regs *regs;
- struct ubi32_uarttio_port *ports;
-
- u8_t irq_requested;
- u8_t driver_registered;
- u8_t irq;
-};
-static struct ubi32_uarttio_instance uarttio_inst;
-
-#ifdef CONFIG_SERIAL_UBI32_UARTTIO_CONSOLE
-static struct console ubi32_uarttio_console;
-#define UBI32_UARTTIO_CONSOLE &ubi32_uarttio_console
-#else
-#define UBI32_UARTTIO_CONSOLE NULL
-#endif
-
-static struct uart_driver ubi32_uarttio_uart_driver = {
- .owner = THIS_MODULE,
- .driver_name = DRIVER_NAME,
- .dev_name = UBI32_UARTTIO_NAME,
- .major = UBI32_UARTTIO_MAJOR,
- .minor = UBI32_UARTTIO_MINOR,
- .cons = UBI32_UARTTIO_CONSOLE,
-};
-
-#ifdef UBI32_UARTTIO_UNUSED
-/*
- * ubi32_uarttio_get_send_space
- */
-static int ubi32_uarttio_get_send_space(struct uarttio_uart *uart)
-{
- int count = uart->tx_fifo_head - uart->tx_fifo_tail;
- if (count < 0) {
- count += uart->tx_fifo_size;
- }
- return uart->tx_fifo_size - count;
-}
-#endif
-
-/*
- * ubi32_uarttio_get_recv_ready
- */
-static int ubi32_uarttio_get_recv_ready(struct uarttio_uart *uart)
-{
- int count = uart->rx_fifo_head - uart->rx_fifo_tail;
- if (count < 0) {
- count += uart->rx_fifo_size;
- }
- return count;
-}
-
-/*
- * ubi32_uarttio_get_char()
- */
-static u8_t ubi32_uarttio_get_char(struct uarttio_uart *uart)
-{
- /*
- * Retrieve byte
- */
- u32_t tail = uart->rx_fifo_tail;
- u8_t data = uart->rx_fifo[tail];
-
- if (++tail == uart->rx_fifo_size) {
- tail = 0;
- }
- uart->rx_fifo_tail = tail;
-
- return data;
-}
-
-/*
- * ubi32_uarttio_put_char()
- */
-static int ubi32_uarttio_put_char(struct uarttio_uart *uart, u8_t c)
-{
- u32_t head = uart->tx_fifo_head;
- u32_t prev = head;
-
- /*
- * Wrap
- */
- if (++head == uart->tx_fifo_size) {
- head = 0;
- }
-
- /*
- * If there isn't any space, return EBUSY
- */
- if (head == uart->tx_fifo_tail) {
- return -EBUSY;
- }
-
- /*
- * Put the character in the queue
- */
- uart->tx_fifo[prev] = c;
- uart->tx_fifo_head = head;
-
- return 0;
-}
-
-/*
- * ubi32_uarttio_set_baud
- */
-static int ubi32_uarttio_set_baud(struct ubi32_uarttio_port *uup, unsigned int baud)
-{
- if (uup->uart->current_baud_rate == baud) {
- return 0;
- }
-
- uup->uart->baud_rate = baud;
- uup->uart->flags |= UARTTIO_UART_FLAG_SET_RATE;
- while (uup->uart->flags & UARTTIO_UART_FLAG_SET_RATE) {
- cpu_relax();
- }
-
- if (uup->uart->current_baud_rate != baud) {
- /*
- * Failed to set baud rate
- */
- printk(KERN_WARNING "Invalid baud rate %u, running at %u\n", baud, uup->uart->current_baud_rate);
- return -EINVAL;
- }
-
- return 0;
-}
-
-/*
- * ubi32_uarttio_handle_receive
- */
-static void ubi32_uarttio_handle_receive(struct ubi32_uarttio_port *uup, int stat)
-{
- struct uarttio_uart *uart = uup->uart;
- struct uart_port *port = &uup->port;
- struct tty_struct *tty = port->info->port.tty;
- unsigned char ch = 0;
- char flag = TTY_NORMAL;
- int count;
-
- if ((stat & (UARTTIO_UART_INT_RX | UARTTIO_UART_INT_RXFRAME | UARTTIO_UART_INT_RXOVF)) == 0) {
- return;
- }
-
- if (stat & UARTTIO_UART_INT_RX) {
- count = ubi32_uarttio_get_recv_ready(uart);
- port->icount.rx += count;
- }
-
- if (stat & UARTTIO_UART_INT_RXOVF) {
- port->icount.overrun++;
- }
-
- if (stat & UARTTIO_UART_INT_RXFRAME) {
- port->icount.frame++;
- }
-
- stat &= ~port->ignore_status_mask;
-
- if (stat & UARTTIO_UART_INT_RX) {
- int i;
- for (i = 0; i < count; i++) {
- ch = ubi32_uarttio_get_char(uart);
- tty_insert_flip_char(tty, ch, flag);
- }
- }
-
- if (stat & UARTTIO_UART_INT_RXFRAME) {
- tty_insert_flip_char(tty, 0, TTY_FRAME);
- }
-
- if (stat & UARTTIO_UART_INT_RXOVF) {
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
-}
-
-/*
- * ubi32_uarttio_stop_tx
- * interrupts are disabled on entry
- */
-static void ubi32_uarttio_stop_tx(struct uart_port *port)
-{
- struct ubi32_uarttio_port *uup = port->private_data;
-
- uup->uart->int_mask &= ~UARTTIO_UART_INT_TXBE;
-}
-
-/*
- * ubi32_uarttio_handle_transmit
- */
-static void ubi32_uarttio_handle_transmit(struct ubi32_uarttio_port *uup, int stat)
-{
- struct uarttio_uart *uart = uup->uart;
- struct uart_port *port = &uup->port;
- struct circ_buf *xmit = &port->info->xmit;
-
- if (!(stat & UARTTIO_UART_INT_TXBE)) {
- return;
- }
-
- if (port->x_char) {
- if (ubi32_uarttio_put_char(uart, port->x_char)) {
- return;
- }
- port->x_char = 0;
- port->icount.tx++;
- return;
- }
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- ubi32_uarttio_stop_tx(port);
- return;
- }
-
- /*
- * Send as many characters as we can
- */
- while (ubi32_uarttio_put_char(uart, xmit->buf[xmit->tail]) == 0) {
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit)) {
- break;
- }
- }
-
- /* wake up */
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
- uart_write_wakeup(port);
- }
-
- if (uart_circ_empty(xmit)) {
- ubi32_uarttio_stop_tx(port);
- }
-}
-
-/*
- * ubi32_uarttio_start_tx
- * port is locked and interrupts are disabled
- */
-static void ubi32_uarttio_start_tx(struct uart_port *port)
-{
- struct ubi32_uarttio_port *uup = port->private_data;
- struct uarttio_uart *uart = uup->uart;
-
- uart->int_mask |= UARTTIO_UART_INT_TXBE;
-}
-
-/*
- * ubi32_uarttio_stop_rx
- * Interrupts are enabled
- */
-static void ubi32_uarttio_stop_rx(struct uart_port *port)
-{
- struct ubi32_uarttio_port *uup = port->private_data;
- struct uarttio_uart *uart = uup->uart;
-
- /*
- * don't forward any more data (like !CREAD)
- */
- uart->int_mask &= ~UARTTIO_UART_INT_RX;
- port->ignore_status_mask = UARTTIO_UART_INT_RX;
-}
-
-/*
- * ubi32_uarttio_enable_ms
- * Set the modem control timer to fire immediately.
- */
-static void ubi32_uarttio_enable_ms(struct uart_port *port)
-{
- /* N/A */
-}
-
-/*
- * ubi32_uarttio_isr
- */
-static irqreturn_t ubi32_uarttio_isr(int irq, void *appdata)
-{
- struct ubi32_uarttio_port *uup = uarttio_ports;
- int i;
-
- /*
- * Service all of the ports
- */
- for (i = 0; i < uarttio_nports; i++) {
- unsigned int flags;
-
- if (!(uup->uart->flags & UARTTIO_UART_FLAG_ENABLED)) {
- uup++;
- continue;
- }
-
- spin_lock(&uup->port.lock);
-
- flags = uup->uart->int_flags;
-
- uup->uart->int_flags = 0;
-
- ubi32_uarttio_handle_receive(uup, flags);
- ubi32_uarttio_handle_transmit(uup, flags);
-
- tty_flip_buffer_push(uup->port.info->port.tty);
-
- spin_unlock(&uup->port.lock);
-
- uup++;
- }
-
- return IRQ_HANDLED;
-}
-
-/*
- * ubi32_uarttio_tx_empty
- * Return TIOCSER_TEMT when transmitter is not busy.
- */
-static unsigned int ubi32_uarttio_tx_empty(struct uart_port *port)
-{
- struct ubi32_uarttio_port *uup = port->private_data;
-
- if (uup->uart->tx_fifo_head == uup->uart->tx_fifo_tail) {
- return TIOCSER_TEMT;
- }
-
- return 0;
-}
-
-/*
- * ubi32_uarttio_get_mctrl
- */
-static unsigned int ubi32_uarttio_get_mctrl(struct uart_port *port)
-{
- return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-}
-
-/*
- * ubi32_uarttio_set_mctrl
- */
-static void ubi32_uarttio_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
- /* N/A */
-}
-
-/*
- * ubi32_uarttio_break_ctl
- */
-static void ubi32_uarttio_break_ctl(struct uart_port *port, int break_state)
-{
- /* N/A */
-}
-
-/*
- * ubi32_uarttio_startup
- */
-static int ubi32_uarttio_startup(struct uart_port *port)
-{
- struct ubi32_uarttio_port *uup = port->private_data;
- struct uarttio_uart *uart = uup->uart;
-
- uart->flags |= UARTTIO_UART_FLAG_ENABLED;
-
- uart->int_mask |= UARTTIO_UART_INT_TXBE | UARTTIO_UART_INT_RX;
-
- return 0;
-}
-
-/*
- * ubi32_uarttio_shutdown
- */
-static void ubi32_uarttio_shutdown(struct uart_port *port)
-{
- struct ubi32_uarttio_port *uup = port->private_data;
- struct uarttio_uart *uart = uup->uart;
-
- uart->int_mask = 0;
- uart->flags &= ~UARTTIO_UART_FLAG_ENABLED;
-}
-
-/*
- * ubi32_uarttio_set_termios
- */
-static void ubi32_uarttio_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old)
-{
- struct ubi32_uarttio_port *uup = port->private_data;
- unsigned long flags;
- unsigned int baud;
-
- spin_lock_irqsave(&port->lock, flags);
-
-#if 0
- port->read_status_mask = UBI32_UARTTIO_RX | UBI32_UARTTIO_RXOVF | UBI32_UARTTIO_TXOVF;
-
- if (termios->c_iflag & INPCK) {
- port->read_status_mask |= UBI32_UARTTIO_RXFRAME;
- }
-#endif
-
- port->ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR) {
- port->ignore_status_mask |= UARTTIO_UART_INT_RXFRAME |
- UARTTIO_UART_INT_RXOVF;
- }
-
- /*
- * ignore all characters if CREAD is not set
- */
- if ((termios->c_cflag & CREAD) == 0) {
- port->ignore_status_mask |= UARTTIO_UART_INT_RX |
- UARTTIO_UART_INT_RXFRAME |
- UARTTIO_UART_INT_RXOVF;
- }
-
- /* update timeout */
- baud = uart_get_baud_rate(port, termios, old, 0, 460800);
- uart_update_timeout(port, termios->c_cflag, baud);
-
- ubi32_uarttio_set_baud(uup, baud);
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-/*
- * ubi32_uarttio_type
- */
-static const char *ubi32_uarttio_type(struct uart_port *port)
-{
- return (port->type == PORT_UBI32_UARTTIO) ? "UBI32_UARTTIO" : NULL;
-}
-
-/*
- * ubi32_uarttio_release_port
- * Release the memory region(s) being used by 'port'.
- */
-static void ubi32_uarttio_release_port(struct uart_port *port)
-{
-}
-
-/*
- * ubi32_uarttio_request_port
- * Request the memory region(s) being used by 'port'.
- */
-static int ubi32_uarttio_request_port(struct uart_port *port)
-{
- return 0;
-}
-
-/*
- * ubi32_uarttio_config_port
- * Configure/autoconfigure the port.
- */
-static void ubi32_uarttio_config_port(struct uart_port *port, int flags)
-{
- if ((flags & UART_CONFIG_TYPE) && (ubi32_uarttio_request_port(port) == 0)) {
- port->type = PORT_UBI32_UARTTIO;
- }
-}
-
-/*
- * ubi32_uarttio_verify_port
- * Verify the new serial_struct (for TIOCSSERIAL).
- *
- * The only change we allow are to the flags and type, and
- * even then only between PORT_UBI32_UARTTIO and PORT_UNKNOWN
- */
-static int ubi32_uarttio_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- return 0;
-}
-
-static struct uart_ops ubi32_uarttio_pops = {
- .tx_empty = ubi32_uarttio_tx_empty,
- .set_mctrl = ubi32_uarttio_set_mctrl,
- .get_mctrl = ubi32_uarttio_get_mctrl,
- .stop_tx = ubi32_uarttio_stop_tx,
- .start_tx = ubi32_uarttio_start_tx,
- .stop_rx = ubi32_uarttio_stop_rx,
- .enable_ms = ubi32_uarttio_enable_ms,
- .break_ctl = ubi32_uarttio_break_ctl,
- .startup = ubi32_uarttio_startup,
- .shutdown = ubi32_uarttio_shutdown,
- .set_termios = ubi32_uarttio_set_termios,
- .type = ubi32_uarttio_type,
- .release_port = ubi32_uarttio_release_port,
- .request_port = ubi32_uarttio_request_port,
- .config_port = ubi32_uarttio_config_port,
- .verify_port = ubi32_uarttio_verify_port,
-};
-
-/*
- * ubi32_uarttio_add_ports
- */
-static int __init ubi32_uarttio_add_ports(void)
-{
- int res = 0;
- struct ubi32_uarttio_port *uup = uarttio_ports;
- int i = 0;
-
- for (i = 0; i < uarttio_nports; i++) {
- /*
- * Setup the GPIOs
- */
- res = gpio_request(uup->tx_pin, "ubi32_uarttio_tx");
- if (res) {
- printk(KERN_WARNING "Failed to request GPIO %d\n", uup->tx_pin);
- res = -EBUSY;
- goto next;
- }
-
- res = gpio_request(uup->rx_pin, "ubi32_uarttio_rx");
- if (res) {
- gpio_free(uup->tx_pin);
- printk(KERN_WARNING "Failed to request GPIO %d\n", uup->rx_pin);
- res = -EBUSY;
- goto next;
- }
-
- res = uart_add_one_port(&ubi32_uarttio_uart_driver, &uup->port);
- if (res) {
- gpio_free(uup->rx_pin);
- gpio_free(uup->tx_pin);
- res = -ENODEV;
- printk(KERN_WARNING "Failed to add port %d,%d\n", uup->tx_pin, uup->rx_pin);
- goto next;
- }
- uup->added = 1;
-
- /*
- * Set the direction of the ports now, after we're sure that everything is ok
- */
- if (!uup->port_init) {
- gpio_direction_output(uup->tx_pin, 1);
- gpio_direction_input(uup->rx_pin);
- }
-
-next:
- uup++;
- }
- return res;
-}
-
-/*
- * ubi32_uarttio_cleanup
- */
-static void ubi32_uarttio_cleanup(void)
-{
- struct ubi32_uarttio_port *uup;
- int i;
-
- /*
- * Stop the hardware thread
- */
- if (uarttio_inst.regs) {
- thread_disable(uarttio_inst.regs->thread);
- }
- if (uarttio_inst.irq_requested) {
- free_irq(uarttio_inst.irq, NULL);
- }
-
- /*
- * Get rid of the ports
- */
- uup = uarttio_inst.ports;
- for (i = 0; i < uarttio_nports; i++) {
- gpio_free(uup->tx_pin);
- gpio_free(uup->rx_pin);
- if (uup->added) {
- uart_remove_one_port(&ubi32_uarttio_uart_driver, &uup->port);
- }
- uup++;
- }
-
- if (uarttio_inst.driver_registered) {
- uart_unregister_driver(&ubi32_uarttio_uart_driver);
- }
-}
-
-/*
- * ubi32_uarttio_setup_port
- * Setup a port in the TIO registers
- */
-static int ubi32_uarttio_setup_port(int index,
- struct uarttio_uart *uart,
- unsigned int baud, unsigned int tx_pin,
- unsigned int rx_pin)
-{
- struct ubi32_uarttio_port *uup = &uarttio_ports[index];
- void *tx_port = ubi_gpio_get_port(tx_pin);
- void *rx_port = ubi_gpio_get_port(rx_pin);
-
- /*
- * Verify the ports are on chip
- */
- if (!tx_port || !rx_port) {
- printk(KERN_WARNING "Invalid port(s) specified: %u or %u\n", tx_pin, rx_pin);
- return -EINVAL;
- }
-
- uup->tx_pin = tx_pin;
- uup->rx_pin = rx_pin;
- uup->uart = uart;
-
- /*
- * Setup the port structure
- */
- uup->port.ops = &ubi32_uarttio_pops;
- uup->port.line = index;
- uup->port.iotype = UPIO_MEM;
- uup->port.flags = UPF_BOOT_AUTOCONF;
- uup->port.fifosize = uup->uart->tx_fifo_size;
- uup->port.private_data = uup;
-
- /*
- * We share this IRQ across all ports
- */
- uup->port.irq = uarttio_inst.irq;
-
- /*
- * We really don't have a mem/map base but without these variables
- * set, the serial_core won't startup.
- */
- uup->port.membase = (void __iomem *)uup;
- uup->port.mapbase = (resource_size_t)uup;
- spin_lock_init(&uup->port.lock);
-
- /*
- * Set up the hardware
- */
- uart->flags = UARTTIO_UART_FLAG_SET_RATE | UARTTIO_UART_FLAG_RESET;
-
- uart->tx_port = (unsigned int)tx_port;
- uart->tx_pin = gpio_pin_index(tx_pin);
- uart->tx_bits = 8;
- uart->tx_stop_bits = 1;
-
- uart->rx_port = (unsigned int)rx_port;
- uart->rx_pin = gpio_pin_index(rx_pin);
- uart->rx_bits = 8;
- uart->rx_stop_bits = 1;
-
- uart->baud_rate = baud;
-
- return 0;
-}
-
-enum ubi32_uarttio_parse_states {
- UBI32_UARTTIO_PARSE_STATE_BAUD,
- UBI32_UARTTIO_PARSE_STATE_TX_PIN,
- UBI32_UARTTIO_PARSE_STATE_RX_PIN,
- UBI32_UARTTIO_PARSE_STATE_HS,
- UBI32_UARTTIO_PARSE_STATE_CTS_PIN,
- UBI32_UARTTIO_PARSE_STATE_RTS_PIN,
-};
-
-/*
- * ubi32_uarttio_parse_param
- */
-static int ubi32_uarttio_parse_param(char *str)
-{
- int res;
- int i;
- int baud = 0;
- int tx_pin = 0;
- int rx_pin = 0;
- int hs = 0;
- int cts_pin = 0;
- int rts_pin = 0;
- int nfound = 0;
- enum ubi32_uarttio_parse_states state = UBI32_UARTTIO_PARSE_STATE_BAUD;
- struct uarttio_uart *uart = uarttio_inst.regs->uarts;
-
- /*
- * Run though the options and generate the proper structures
- */
- res = get_option(&str, &i);
- while ((res == 2) || (res == 1)) {
- switch (state) {
- case UBI32_UARTTIO_PARSE_STATE_BAUD:
- /*
- * If we are here and nfound > 0 then create the port
- * based on the previous input
- */
- if (nfound) {
- /*
- * Create the port
- */
- if (ubi32_uarttio_setup_port(nfound - 1, uart, baud, tx_pin, rx_pin)) {
- /*
- * Port was invalid
- */
- goto fail;
- } else {
- printk(KERN_INFO "Serial port %d: tx=%d:rx=%d @ %d\n", nfound, tx_pin, rx_pin, baud);
- uart++;
- }
- }
-
- /*
- * Reset the variables and go to the next state
- */
- hs = 0;
- baud = i;
- state = UBI32_UARTTIO_PARSE_STATE_TX_PIN;
- break;
-
- case UBI32_UARTTIO_PARSE_STATE_TX_PIN:
- tx_pin = i;
- state = UBI32_UARTTIO_PARSE_STATE_RX_PIN;
- break;
-
- case UBI32_UARTTIO_PARSE_STATE_RX_PIN:
- rx_pin = i;
- state = UBI32_UARTTIO_PARSE_STATE_HS;
- break;
-
- case UBI32_UARTTIO_PARSE_STATE_HS:
- hs = i;
- if (hs) {
- state = UBI32_UARTTIO_PARSE_STATE_CTS_PIN;
- break;
- }
-
- if (nfound == uarttio_inst.regs->max_uarts) {
- printk(KERN_WARNING "Maximum number of serial ports reached\n");
- goto done;
- }
- nfound++;
- state = UBI32_UARTTIO_PARSE_STATE_BAUD;
- break;
-
- case UBI32_UARTTIO_PARSE_STATE_CTS_PIN:
- cts_pin = i;
- state = UBI32_UARTTIO_PARSE_STATE_RTS_PIN;
- break;
-
- case UBI32_UARTTIO_PARSE_STATE_RTS_PIN:
- rts_pin = i;
-
- if (nfound == uarttio_inst.regs->max_uarts) {
- printk(KERN_WARNING "Maximum number of serial ports reached\n");
- goto done;
- }
- nfound++;
- state = UBI32_UARTTIO_PARSE_STATE_BAUD;
- break;
- }
- res = get_option(&str, &i);
- }
-
- if ((res > 2) || state != UBI32_UARTTIO_PARSE_STATE_BAUD) {
- printk(KERN_WARNING "Parameter syntax error.\n");
- res = -EINVAL;
- goto fail;
- }
-
- /*
- * Create the final port
- */
- if (ubi32_uarttio_setup_port(nfound - 1, uart, baud, tx_pin, rx_pin)) {
- goto fail;
- }
- printk(KERN_INFO "Serial port %d: tx=%d:rx=%d @ %d\n", nfound, tx_pin, rx_pin, baud);
-
-done:
- uarttio_nports = nfound;
-
- return nfound ? 0 : -ENODEV;
-
-fail:
- /*
- * Reset the ports
- */
- uart = uarttio_inst.regs->uarts;
- for (i = 0; i < uarttio_inst.regs->max_uarts; i++) {
- uart->flags = 0;
- uart++;
- }
-
- return res;
-}
-
-/*
- * ubi32_uarttio_probe
- */
-static int ubi32_uarttio_probe(void)
-{
- int ret;
- struct uarttio_node *uart_node;
- char *str = utio_ports_param;
- static int probed;
- static int probe_result;
-
- /*
- * We only want to be probed once, we could be probed twice
- * for example if we are used as a console
- */
- if (probed) {
- return probe_result;
- }
- probed = 1;
-
- /*
- * Extract the TIO name from the setup string
- */
- while (*str) {
- if (*str == ',') {
- *str++ = 0;
- break;
- }
- str++;
- }
-
- if (!*str) {
- probe_result = -EINVAL;
- return -EINVAL;
- }
-
- uart_node = (struct uarttio_node *)devtree_find_node(utio_ports_param);
- if (!uart_node) {
- probe_result = -ENODEV;
- return -ENODEV;
- }
-
- uarttio_inst.irq = uart_node->dn.recvirq;
- uarttio_inst.regs = uart_node->regs;
-
- /*
- * Parse module parameters.
- */
- ret = ubi32_uarttio_parse_param(str);
- if (ret != 0) {
- ubi32_uarttio_cleanup();
- probe_result = ret;
- return ret;
- }
-
- ubi32_uarttio_uart_driver.nr = uarttio_nports;
-
- return 0;
-}
-
-#if defined(CONFIG_SERIAL_UBI32_UARTTIO_CONSOLE)
-/*
- * ubi32_uarttio_console_setup
- */
-static int __init ubi32_uarttio_console_setup(struct console *co, char *options)
-{
- int baud;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
- struct ubi32_uarttio_port *uup;
-
- /*
- * Check whether an invalid uart number has been specified, and
- * if so, search for the first available port that does have
- * console support.
- */
- if (co->index == -1 || co->index >= uarttio_nports) {
- co->index = 0;
- }
- uup = &uarttio_ports[co->index];
- baud = uup->uart->baud_rate;
- uup->uart->flags |= UARTTIO_UART_FLAG_ENABLED;
-
- /*
- * Setup the GPIOs
- * We have to use the direct interface because the gpio
- * subsystem is not available at this point.
- */
- uup->port_init = 1;
- UBICOM32_GPIO_SET_PIN_HIGH(uup->tx_pin);
- UBICOM32_GPIO_SET_PIN_OUTPUT(uup->tx_pin);
- UBICOM32_GPIO_SET_PIN_INPUT(uup->rx_pin);
-
- /*
- * Start the thread
- */
- thread_enable(uarttio_inst.regs->thread);
-
- /*
- * Process options
- */
- if (options) {
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- if (ubi32_uarttio_set_baud(uup, baud)) {
- baud = uup->uart->current_baud_rate;
- }
- }
-
- return uart_set_options(&uup->port, co, baud, 'n', 8, 'n');
-}
-
-/*
- * ubi32_uarttio_console_putchar
- */
-static void ubi32_uarttio_console_putchar(struct uart_port *port, int ch)
-{
- struct ubi32_uarttio_port *uup = port->private_data;
-
- while (ubi32_uarttio_put_char(uup->uart, ch)) {
- cpu_relax();
- }
-}
-
-/*
- * ubi32_uarttio_console_write
- * Interrupts are disabled on entering
- */
-static void ubi32_uarttio_console_write(struct console *co, const char *s, unsigned int count)
-{
- struct uart_port *port = &(uarttio_ports[co->index].port);
- unsigned long flags = 0;
-
- spin_lock_irqsave(&port->lock, flags);
- uart_console_write(port, s, count, ubi32_uarttio_console_putchar);
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static struct console ubi32_uarttio_console = {
- .name = UBI32_UARTTIO_NAME,
- .write = ubi32_uarttio_console_write,
- .device = uart_console_device,
- .setup = ubi32_uarttio_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &ubi32_uarttio_uart_driver,
-};
-
-static int __init ubi32_uarttio_console_init(void)
-{
- int res;
-
- res = ubi32_uarttio_probe();
- if (res) {
- return res;
- }
-
- register_console(&ubi32_uarttio_console);
- return 0;
-}
-console_initcall(ubi32_uarttio_console_init);
-#endif /* CONFIG_SERIAL_UBI32_UARTTIO_CONSOLE */
-
-/*
- * ubi32_serial_suspend
- */
-static int ubi32_uarttio_suspend(struct platform_device *pdev, pm_message_t state)
-{
- int i;
- for (i = 0; i < uarttio_nports; i++) {
- uart_suspend_port(&ubi32_uarttio_uart_driver, &uarttio_ports[i].port);
- }
-
- return 0;
-}
-
-/*
- * ubi32_serial_resume
- */
-static int ubi32_uarttio_resume(struct platform_device *pdev)
-{
- int i;
- for (i = 0; i < uarttio_nports; i++) {
- uart_resume_port(&ubi32_uarttio_uart_driver, &uarttio_ports[i].port);
- }
-
- return 0;
-}
-
-/*
- * ubi32_uarttio_remove
- */
-static int __devexit ubi32_uarttio_remove(struct platform_device *pdev)
-{
- ubi32_uarttio_cleanup();
-
- uart_unregister_driver(&ubi32_uarttio_uart_driver);
-
- return 0;
-}
-
-static struct platform_driver ubi32_uarttio_platform_driver = {
- .remove = __devexit_p(ubi32_uarttio_remove),
- .suspend = ubi32_uarttio_suspend,
- .resume = ubi32_uarttio_resume,
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-#ifndef MODULE
-/*
- * Called at boot time.
- *
- * uarttio=TIONAME,(baud,tx_pin,rx_pin,handshake[,cts_pin,rts_pin],...)
- * TIONAME is the name of the devtree node which describes the UARTTIO
- * pin is the index of the pin, i.e. PA4 is 5 [(port * 32) + pin]
- * handshake = 1 to enable handshaking, provide cts_pin, rts_pin (UNSUPPORTED)
- * handshake = 0 to disable handshaking, do not provide cts_pin, rts_pin
- * Ex: uarttio=UARTTIO,57600,7,6,0,9600,8,9,0
- */
-static int __init ubi32_uarttio_setup(char *str)
-{
- strncpy(utio_ports_param, str, UBI32_UARTTIO_MAX_PARAM_LEN);
- utio_ports_param[UBI32_UARTTIO_MAX_PARAM_LEN - 1] = 0;
- return 1;
-}
-__setup("uarttio=", ubi32_uarttio_setup);
-#endif
-
-/*
- * ubi32_uarttio_init
- */
-static int __init ubi32_uarttio_init(void)
-{
- int ret;
- int i;
-
- ret = ubi32_uarttio_probe();
- if (ret) {
- return ret;
- }
-
- /*
- * Request the IRQ (do it here since many ports share the same IRQ)
- */
- ret = request_irq(uarttio_inst.irq, ubi32_uarttio_isr, IRQF_DISABLED, DRIVER_NAME, NULL);
- if (ret != 0) {
- printk(KERN_WARNING "Could not request IRQ %d\n", uarttio_inst.irq);
- goto fail;
- }
- uarttio_inst.irq_requested = 1;
-
- /*
- * Register the UART driver and add the ports
- */
- ret = uart_register_driver(&ubi32_uarttio_uart_driver);
- if (ret != 0) {
- goto fail;
- }
- uarttio_inst.driver_registered = 1;
-
- ret = ubi32_uarttio_add_ports();
- if (ret != 0) {
- ubi32_uarttio_cleanup();
- return ret;
- }
-
- /*
- * Start the thread
- */
- thread_enable(uarttio_inst.regs->thread);
-
- for (i = 0; i < uarttio_nports; i++) {
- pr_info("Serial: Ubicom32 uarttio #%d: tx:%d rx:%d baud:%d\n",
- i, uarttio_ports[i].tx_pin, uarttio_ports[i].rx_pin,
- uarttio_ports[i].uart->current_baud_rate);
- }
- pr_info("Serial: Ubicom32 uarttio started on thread:%d irq:%d\n", uarttio_inst.regs->thread, uarttio_inst.irq);
-
- return ret;
-
-fail:
- ubi32_uarttio_cleanup();
- return ret;
-}
-module_init(ubi32_uarttio_init);
-
-/*
- * ubi32_uarttio_exit
- */
-static void __exit ubi32_uarttio_exit(void)
-{
- platform_driver_unregister(&ubi32_uarttio_platform_driver);
-}
-module_exit(ubi32_uarttio_exit);
-
-module_param_string(ports, utio_ports_param, sizeof(utio_ports_param), 0444);
-MODULE_PARM_DESC(ports, "Sets the ports to allocate: ports=TIONAME,(baud,txpin,rxpin,handshake[,ctspin,rtspin],...)\n"
- " TIONAME is the name of the devtree node which describes the UARTTIO\n"
- " pin is the index of the pin, i.e. PA4 is 5 [(port * 32) + pin]\n"
- " handshake = 1 to enable handshaking, provide ctspin, rtspin (UNSUPPORTED)\n"
- " handshake = 0 to disable handshaking, do not provide ctspin, rtspin\n"
- " Ex: ports=UARTTIO,57600,7,6,0,9600,8,9,0\n");
-MODULE_AUTHOR("Patrick Tjin <pat.tjin@ubicom.com>");
-MODULE_DESCRIPTION("Ubicom serial virtual peripherial driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV_MAJOR(UBI32_UARTTIO_MAJOR);
-MODULE_ALIAS("platform:" DRIVER_NAME);
+++ /dev/null
-/*
- * drivers/spi_spi_ubicom32_gpio.c
- * Ubicom32 GPIO based SPI driver
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-
-#include <linux/gpio.h>
-
-#include <asm/ubicom32-spi-gpio.h>
-
-#define DRIVER_NAME "ubicom32-spi-gpio"
-
-struct ubicom32_spi_gpio {
- struct spi_bitbang bitbang;
-
- struct ubicom32_spi_gpio_platform_data *pdata;
-
- struct platform_device *dev;
-};
-
-/*
- * The following 4 functions are used by EXPAND_BITBANG_TXRX to bitbang the data out.
- */
-static inline void setsck(struct spi_device *dev, int on)
-{
- struct ubicom32_spi_gpio *usg = (struct ubicom32_spi_gpio *)spi_master_get_devdata(dev->master);
- gpio_set_value(usg->pdata->pin_clk, on ? 1 : 0);
-}
-
-static inline void setmosi(struct spi_device *dev, int on)
-{
- struct ubicom32_spi_gpio *usg = (struct ubicom32_spi_gpio *)spi_master_get_devdata(dev->master);
- gpio_set_value(usg->pdata->pin_mosi, on ? 1 : 0);
-}
-
-static inline u32 getmiso(struct spi_device *dev)
-{
- struct ubicom32_spi_gpio *usg = (struct ubicom32_spi_gpio *)spi_master_get_devdata(dev->master);
- return gpio_get_value(usg->pdata->pin_miso) ? 1 : 0;
-}
-
-#define spidelay(x) ndelay(x)
-
-#define EXPAND_BITBANG_TXRX
-#include <linux/spi/spi_bitbang.h>
-
-/*
- * ubicom32_spi_gpio_txrx_mode0
- */
-static u32 ubicom32_spi_gpio_txrx_mode0(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
-{
- return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
-}
-
-/*
- * ubicom32_spi_gpio_txrx_mode1
- */
-static u32 ubicom32_spi_gpio_txrx_mode1(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
-{
- return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
-}
-
-/*
- * ubicom32_spi_gpio_txrx_mode2
- */
-static u32 ubicom32_spi_gpio_txrx_mode2(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
-{
- return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
-}
-
-/*
- * ubicom32_spi_gpio_txrx_mode3
- */
-static u32 ubicom32_spi_gpio_txrx_mode3(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
-{
- return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
-}
-
-/*
- * ubicom32_spi_gpio_chipselect
- */
-static void ubicom32_spi_gpio_chipselect(struct spi_device *dev, int value)
-{
- struct ubicom32_spi_gpio_controller_data *cd = (struct ubicom32_spi_gpio_controller_data *)dev->controller_data;
- unsigned int cs_polarity = dev->mode & SPI_CS_HIGH ? 1 : 0;
-
- if (value == BITBANG_CS_ACTIVE) {
- gpio_set_value(cd->pin_cs, cs_polarity);
- return;
- }
- gpio_set_value(cd->pin_cs, !cs_polarity);
-}
-
-/*
- * ubicom32_spi_gpio_probe
- */
-static int ubicom32_spi_gpio_probe(struct platform_device *dev)
-{
- struct ubicom32_spi_gpio_platform_data *pdata;
- struct spi_master *master;
- struct ubicom32_spi_gpio *usg;
- int ret;
-
- master = spi_alloc_master(&dev->dev, sizeof(struct ubicom32_spi_gpio));
- if (master == NULL) {
- dev_err(&dev->dev, "failed to allocate spi master\n");
- ret = -ENOMEM;
- goto err;
- }
-
- usg = (struct ubicom32_spi_gpio *)spi_master_get_devdata(master);
-
- platform_set_drvdata(dev, usg);
-
- /*
- * Copy in the platform data
- */
- pdata = dev->dev.platform_data;
- usg->pdata = dev->dev.platform_data;
-
- /*
- * Request the GPIO lines
- */
- ret = gpio_request(pdata->pin_mosi, "spi-mosi");
- if (ret) {
- dev_err(&dev->dev, "Failed to allocate spi-mosi GPIO\n");
- goto err;
- }
-
- ret = gpio_request(pdata->pin_miso, "spi-miso");
- if (ret) {
- dev_err(&dev->dev, "Failed to allocate spi-miso GPIO\n");
- goto err_nomiso;
- }
-
- ret = gpio_request(pdata->pin_clk, "spi-clk");
- if (ret) {
- dev_err(&dev->dev, "Failed to allocate spi-clk GPIO\n");
- goto err_noclk;
- }
-
- /*
- * Setup spi-bitbang adaptor
- */
- usg->bitbang.flags |= SPI_CS_HIGH;
- usg->bitbang.master = spi_master_get(master);
- usg->bitbang.master->bus_num = pdata->bus_num;
- usg->bitbang.master->num_chipselect = pdata->num_chipselect;
- usg->bitbang.chipselect = ubicom32_spi_gpio_chipselect;
-
- usg->bitbang.txrx_word[SPI_MODE_0] = ubicom32_spi_gpio_txrx_mode0;
- usg->bitbang.txrx_word[SPI_MODE_1] = ubicom32_spi_gpio_txrx_mode1;
- usg->bitbang.txrx_word[SPI_MODE_2] = ubicom32_spi_gpio_txrx_mode2;
- usg->bitbang.txrx_word[SPI_MODE_3] = ubicom32_spi_gpio_txrx_mode3;
-
- /*
- * Setup the GPIO pins
- */
- gpio_direction_output(pdata->pin_clk, pdata->clk_default);
- gpio_direction_output(pdata->pin_mosi, 0);
- gpio_direction_input(pdata->pin_miso);
-
- /*
- * Ready to go
- */
- ret = spi_bitbang_start(&usg->bitbang);
- if (ret) {
- goto err_no_bitbang;
- }
-
- return 0;
-
-err_no_bitbang:
- spi_master_put(usg->bitbang.master);
-
- gpio_free(pdata->pin_clk);
-
-err_noclk:
- gpio_free(pdata->pin_miso);
-
-err_nomiso:
- gpio_free(pdata->pin_mosi);
-
-err:
- return ret;
-}
-
-/*
- * ubicom32_spi_gpio_remove
- */
-static int ubicom32_spi_gpio_remove(struct platform_device *dev)
-{
- struct ubicom32_spi_gpio *sp = platform_get_drvdata(dev);
-
- spi_bitbang_stop(&sp->bitbang);
- spi_master_put(sp->bitbang.master);
-
- return 0;
-}
-
-/*
- * Work with hotplug and coldplug
- */
-MODULE_ALIAS("platform:ubicom32_spi_gpio");
-
-static struct platform_driver ubicom32_spi_gpio_drv = {
- .probe = ubicom32_spi_gpio_probe,
- .remove = ubicom32_spi_gpio_remove,
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-/*
- * ubicom32_spi_gpio_init
- */
-static int __init ubicom32_spi_gpio_init(void)
-{
- return platform_driver_register(&ubicom32_spi_gpio_drv);
-}
-
-/*
- * ubicom32_spi_gpio_exit
- */
-static void __exit ubicom32_spi_gpio_exit(void)
-{
- platform_driver_unregister(&ubicom32_spi_gpio_drv);
-}
-
-module_init(ubicom32_spi_gpio_init);
-module_exit(ubicom32_spi_gpio_exit);
-
-MODULE_DESCRIPTION("Ubicom32 SPI-GPIO Driver");
-MODULE_AUTHOR("Pat Tjin, <@ubicom.com>");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * drivers/uio/uio_ubicom32ring.c
- *
- * Userspace I/O platform driver for Ubicom32 ring buffers
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * Based on uio_ubicom32ring.c by Magnus Damm
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/platform_device.h>
-#include <linux/uio_driver.h>
-#include <linux/spinlock.h>
-#include <linux/bitops.h>
-#include <linux/interrupt.h>
-#include <linux/stringify.h>
-
-#include <asm/ip5000.h>
-#include <asm/ubicom32ring.h>
-
-#define DRIVER_NAME "uio_ubicom32ring"
-
-struct uio_ubicom32ring_data {
- struct uio_info *uioinfo;
-
- struct uio_ubicom32ring_regs *regs;
-
- /*
- * IRQ used to kick the ring buffer
- */
- int irq_tx;
- int irq_rx;
-
- spinlock_t lock;
-
- unsigned long flags;
-
- char name[0];
-};
-
-static irqreturn_t uio_ubicom32ring_handler(int irq, struct uio_info *dev_info)
-{
- struct uio_ubicom32ring_data *priv = dev_info->priv;
-
- /* Just disable the interrupt in the interrupt controller, and
- * remember the state so we can allow user space to enable it later.
- */
-
- if (!test_and_set_bit(0, &priv->flags))
- disable_irq_nosync(irq);
-
- return IRQ_HANDLED;
-}
-
-static int uio_ubicom32ring_irqcontrol(struct uio_info *dev_info, s32 irq_on)
-{
- struct uio_ubicom32ring_data *priv = dev_info->priv;
- unsigned long flags;
-
- /* Allow user space to enable and disable the interrupt
- * in the interrupt controller, but keep track of the
- * state to prevent per-irq depth damage.
- *
- * Serialize this operation to support multiple tasks.
- */
-
- spin_lock_irqsave(&priv->lock, flags);
-
- if (irq_on & 2) {
- /*
- * Kick the ring buffer (if we can)
- */
- if (priv->irq_tx != 0xFF) {
- ubicom32_set_interrupt(priv->irq_tx);
- }
- }
-
- if (priv->irq_rx != 0xFF) {
- if (irq_on & 1) {
- if (test_and_clear_bit(0, &priv->flags))
- enable_irq(dev_info->irq);
- } else {
- if (!test_and_set_bit(0, &priv->flags))
- disable_irq(dev_info->irq);
- }
- }
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- return 0;
-}
-
-static int uio_ubicom32ring_probe(struct platform_device *pdev)
-{
- struct uio_info *uioinfo;
- struct uio_mem *uiomem;
- struct uio_ubicom32ring_data *priv;
- struct uio_ubicom32ring_regs *regs;
- struct resource *mem_resource;
- struct resource *irqtx_resource;
- struct resource *irqrx_resource;
- int ret = -EINVAL;
- int i;
-
- uioinfo = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
- if (!uioinfo) {
- dev_err(&pdev->dev, "unable to kmalloc\n");
- return -ENOMEM;
- }
-
- /*
- * Allocate private data with some string space after
- */
- i = sizeof(DRIVER_NAME) + 1;
- i += pdev->dev.platform_data ? strlen(pdev->dev.platform_data) : 0;
- priv = kzalloc(sizeof(struct uio_ubicom32ring_data) + i, GFP_KERNEL);
- if (!priv) {
- dev_err(&pdev->dev, "unable to kmalloc\n");
- kfree(uioinfo);
- return -ENOMEM;
- }
-
- strcpy(priv->name, DRIVER_NAME ":");
- if (pdev->dev.platform_data) {
- strcat(priv->name, pdev->dev.platform_data);
- }
- uioinfo->priv = priv;
- uioinfo->name = priv->name;
- uioinfo->version = "0.1";
-
- priv->uioinfo = uioinfo;
- spin_lock_init(&priv->lock);
- priv->flags = 0; /* interrupt is enabled to begin with */
-
- /*
- * Get our resources, the IRQ_TX and IRQ_RX are optional.
- */
- priv->irq_tx = 0xFF;
- irqtx_resource = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (irqtx_resource) {
- priv->irq_tx = irqtx_resource->start;
- }
-
- uioinfo->irq = -1;
- priv->irq_rx = 0xFF;
- irqrx_resource = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
- if (irqrx_resource) {
- priv->irq_rx = irqrx_resource->start;
- uioinfo->irq = priv->irq_rx;
- uioinfo->handler = uio_ubicom32ring_handler;
- }
-
- mem_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem_resource || !mem_resource->start) {
- dev_err(&pdev->dev, "No valid memory resource found\n");
- ret = -ENODEV;
- goto fail;
- }
- regs = (struct uio_ubicom32ring_regs *)mem_resource->start;
- priv->regs = regs;
-
- if (regs->version != UIO_UBICOM32RING_REG_VERSION) {
- dev_err(&pdev->dev, "version %d not supported\n", regs->version);
- ret = -ENODEV;
- goto fail;
- }
-
- /*
- * First range is the shared register space, if we have any
- */
- uiomem = &uioinfo->mem[0];
- if (regs->regs_size) {
- uiomem->memtype = UIO_MEM_PHYS;
- uiomem->addr = (u32_t)regs->regs;
- uiomem->size = regs->regs_size;
- ++uiomem;
- dev_info(&pdev->dev, "regs:%p (%u) / rings: %d found\n", regs->regs, regs->regs_size, regs->num_rings);
- } else {
- dev_info(&pdev->dev, "rings: %d found\n", regs->num_rings);
- }
-
- /*
- * The rest of the range correspond to the rings
- */
- for (i = 0; i < regs->num_rings; i++) {
- dev_info(&pdev->dev, "\t%d: entries:%d ring:%p\n",
- i, regs->rings[i]->entries, &(regs->rings[i]->ring));
- if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
- dev_warn(&pdev->dev, "device has more than "
- __stringify(MAX_UIO_MAPS)
- " I/O memory resources.\n");
- break;
- }
-
- uiomem->memtype = UIO_MEM_PHYS;
- uiomem->addr = (u32_t)&(regs->rings[i]->head);
- uiomem->size = (regs->rings[i]->entries * sizeof(u32_t)) +
- sizeof(struct uio_ubicom32ring_desc);
- ++uiomem;
- }
-
- while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
- uiomem->size = 0;
- ++uiomem;
- }
-
- /* This driver requires no hardware specific kernel code to handle
- * interrupts. Instead, the interrupt handler simply disables the
- * interrupt in the interrupt controller. User space is responsible
- * for performing hardware specific acknowledge and re-enabling of
- * the interrupt in the interrupt controller.
- *
- * Interrupt sharing is not supported.
- */
- uioinfo->irq_flags = IRQF_DISABLED;
- uioinfo->irqcontrol = uio_ubicom32ring_irqcontrol;
-
- ret = uio_register_device(&pdev->dev, priv->uioinfo);
- if (ret) {
- dev_err(&pdev->dev, "unable to register uio device\n");
- goto fail;
- }
-
- platform_set_drvdata(pdev, priv);
-
- dev_info(&pdev->dev, "'%s' using irq: rx %d tx %d, regs %p\n",
- priv->name, priv->irq_rx, priv->irq_tx, priv->regs);
-
- return 0;
-
-fail:
- kfree(uioinfo);
- kfree(priv);
- return ret;
-}
-
-static int uio_ubicom32ring_remove(struct platform_device *pdev)
-{
- struct uio_ubicom32ring_data *priv = platform_get_drvdata(pdev);
-
- uio_unregister_device(priv->uioinfo);
- kfree(priv->uioinfo);
- kfree(priv);
- return 0;
-}
-
-static struct platform_driver uio_ubicom32ring = {
- .probe = uio_ubicom32ring_probe,
- .remove = uio_ubicom32ring_remove,
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init uio_ubicom32ring_init(void)
-{
- return platform_driver_register(&uio_ubicom32ring);
-}
-
-static void __exit uio_ubicom32ring_exit(void)
-{
- platform_driver_unregister(&uio_ubicom32ring);
-}
-
-module_init(uio_ubicom32ring_init);
-module_exit(uio_ubicom32ring_exit);
-
-MODULE_AUTHOR("Patrick Tjin");
-MODULE_DESCRIPTION("Userspace I/O driver for Ubicom32 ring buffers");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" DRIVER_NAME);
+++ /dev/null
-/*
- * drivers/usb/musb/ubi32_usb.c
- * Ubicom32 usb controller driver.
- *
- * (C) Copyright 2009, Ubicom, Inc.
- * Copyright (C) 2005-2006 by Texas Instruments
- *
- * Derived from the Texas Instruments Inventra Controller Driver for Linux.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/io.h>
-#include <asm/ip5000.h>
-#include "musb_core.h"
-
-void musb_platform_enable(struct musb *musb)
-{
-}
-void musb_platform_disable(struct musb *musb)
-{
-}
-
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode) {
- return 0;
-}
-
-static void ip5k_usb_hcd_vbus_power(struct musb *musb, int is_on, int sleeping)
-{
-}
-
-static void ip5k_usb_hcd_set_vbus(struct musb *musb, int is_on)
-{
- u8 devctl;
- /* HDRC controls CPEN, but beware current surges during device
- * connect. They can trigger transient overcurrent conditions
- * that must be ignored.
- */
-
- devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-
- if (is_on) {
- musb->is_active = 1;
- musb->xceiv.default_a = 1;
- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
- devctl |= MUSB_DEVCTL_SESSION;
-
- MUSB_HST_MODE(musb);
- } else {
- musb->is_active = 0;
-
- /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and
- * jumping right to B_IDLE...
- */
-
- musb->xceiv.default_a = 0;
- musb->xceiv.state = OTG_STATE_B_IDLE;
- devctl &= ~MUSB_DEVCTL_SESSION;
-
- MUSB_DEV_MODE(musb);
- }
- musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
-
- DBG(1, "VBUS %s, devctl %02x "
- /* otg %3x conf %08x prcm %08x */ "\n",
- otg_state_string(musb),
- musb_readb(musb->mregs, MUSB_DEVCTL));
-}
-static int ip5k_usb_hcd_set_power(struct otg_transceiver *x, unsigned mA)
-{
- return 0;
-}
-
-static int musb_platform_resume(struct musb *musb);
-
-int __init musb_platform_init(struct musb *musb)
-{
-
-#ifdef CONFIG_UBICOM32_V4
- u32_t chip_id;
- asm volatile (
- "move.4 %0, CHIP_ID \n\t"
- : "=r" (chip_id)
- );
- if (chip_id == 0x30001) {
- *((u32_t *)(GENERAL_CFG_BASE + GEN_USB_PHY_TEST)) &= ~(1 << 30);
- udelay(1);
- *((u32_t *)(GENERAL_CFG_BASE + GEN_USB_PHY_TEST)) &= ~(1 << 31);
- } else {
- *((u32_t *)(GENERAL_CFG_BASE + GEN_USB_PHY_TEST)) &= ~(1 << 17);
- udelay(1);
- *((u32_t *)(GENERAL_CFG_BASE + GEN_USB_PHY_TEST)) &= ~(1 << 14);
- }
-#endif
-
- *((u32_t *)(GENERAL_CFG_BASE + GEN_USB_PHY_CFG)) |= ((1 << 14) | (1 <<15));
-
- /* The i-clk is AUTO gated. Hence there is no need
- * to disable it until the driver is shutdown */
-
- clk_enable(musb->clock);
- musb_platform_resume(musb);
-
- ip5k_usb_hcd_vbus_power(musb, musb->board_mode == MUSB_HOST, 1);
-
- if (is_host_enabled(musb))
- musb->board_set_vbus = ip5k_usb_hcd_set_vbus;
- if (is_peripheral_enabled(musb))
- musb->xceiv.set_power = ip5k_usb_hcd_set_power;
-
- return 0;
-}
-
-
-int musb_platform_suspend(struct musb *musb)
-{
- return 0;
-}
-int musb_platform_resume(struct musb *musb)
-{
- return 0;
-}
-
-int musb_platform_exit(struct musb *musb)
-{
- ip5k_usb_hcd_vbus_power(musb, 0 /*off*/, 1);
- musb_platform_suspend(musb);
- return 0;
-}
+++ /dev/null
-/*
- * drivers/video/backlight/ubicom32bl.c
- * Backlight driver for the Ubicom32 platform
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/backlight.h>
-#include <linux/fb.h>
-
-#include <asm/ubicom32bl.h>
-#include <asm/ip5000.h>
-
-#define DRIVER_NAME "ubicom32bl"
-#define UBICOM32BL_MAX_BRIGHTNESS 255
-
-struct ubicom32bl_data {
- /*
- * Pointer to the platform data structure. Keep this around since we need values
- * from it to set the backlight intensity.
- */
- const struct ubicom32bl_platform_data *pdata;
-
- /*
- * Backlight device, we have to save this for use when we remove ourselves.
- */
- struct backlight_device *bldev;
-
- /*
- * Current intensity, used for get_intensity.
- */
- int cur_intensity;
-
- /*
- * Init function for PWM
- */
- int (*init_fn)(struct ubicom32bl_data *);
-
- /*
- * Set intensity function depending on the backlight type
- */
- int (*set_intensity_fn)(struct ubicom32bl_data *, int);
-};
-
-/*
- * ubicom32bl_set_intensity_gpio
- */
-static int ubicom32bl_set_intensity_gpio(struct ubicom32bl_data *ud, int intensity)
-{
- ud->cur_intensity = intensity ? 255 : 0;
-
- if (intensity) {
- // set gpio
- return 0;
- }
-
- // clear gpio
- return 0;
-}
-
-/*
- * ubicom32bl_set_intensity_hw
- */
-static int ubicom32bl_set_intensity_hw(struct ubicom32bl_data *ud, int intensity)
-{
- u16_t period = ud->pdata->pwm_period;
- u16_t duty;
-
- /*
- * Calculate the new duty cycle
- */
- duty = (period * intensity) / (UBICOM32BL_MAX_BRIGHTNESS + 1);
-
- /*
- * Set the new duty cycle
- */
- switch (ud->pdata->pwm_channel) {
- case 0:
- /*
- * Channel 0 is in the lower half of PORT C ctl0 and ctl1
- */
- UBICOM32_IO_PORT(RC)->ctl1 = (ud->pdata->pwm_period << 16) | duty;
- break;
-
- case 1:
- /*
- * Channel 1 is in the upper half of PORT C ctl0 and ctl2
- */
- UBICOM32_IO_PORT(RC)->ctl2 = (ud->pdata->pwm_period << 16) | duty;
- break;
-
- case 2:
- /*
- * Channel 2 is in PORT H ctl0 and ctl1
- */
- UBICOM32_IO_PORT(RH)->ctl1 = (ud->pdata->pwm_period << 16) | duty;
- break;
- }
-
- ud->cur_intensity = intensity;
-
- return 0;
-}
-
-/*
- * ubicom32bl_set_intensity
- */
-static int ubicom32bl_set_intensity(struct backlight_device *bd)
-{
- struct ubicom32bl_data *ud = (struct ubicom32bl_data *)bl_get_data(bd);
- int intensity = bd->props.brightness;
-
- /*
- * If we're blanked the the intensity doesn't matter.
- */
- if ((bd->props.power != FB_BLANK_UNBLANK) || (bd->props.fb_blank != FB_BLANK_UNBLANK)) {
- intensity = 0;
- }
-
- /*
- * Check for inverted backlight.
- */
- if (ud->pdata->invert) {
- intensity = UBICOM32BL_MAX_BRIGHTNESS - intensity;
- }
-
- if (ud->set_intensity_fn) {
- return ud->set_intensity_fn(ud, intensity);
- }
-
- return -ENXIO;
-}
-
-/*
- * ubicom32bl_get_intensity
- * Return the current intensity of the backlight.
- */
-static int ubicom32bl_get_intensity(struct backlight_device *bd)
-{
- struct ubicom32bl_data *ud = (struct ubicom32bl_data *)bl_get_data(bd);
-
- return ud->cur_intensity;
-}
-
-/*
- * ubicom32bl_init_hw_pwm
- * Set the appropriate PWM registers
- */
-static int ubicom32bl_init_hw_pwm(struct ubicom32bl_data *ud)
-{
- /*
- * bit 13: enable
- */
- u16_t pwm_cfg = (1 << 13) | (ud->pdata->pwm_prescale << 8) ;
-
- switch (ud->pdata->pwm_channel) {
- case 0:
- /*
- * Channel 0 is in the lower half of PORT C ctl0 and ctl1 (PA5)
- */
- UBICOM32_IO_PORT(RC)->ctl0 &= ~0xFFFF;
- UBICOM32_IO_PORT(RC)->ctl0 |= pwm_cfg;
- UBICOM32_IO_PORT(RC)->ctl1 = ud->pdata->pwm_period << 16;
-
- /*
- * If the port function is not set, set it to GPIO/PWM
- */
- if (!UBICOM32_IO_PORT(RA)->function) {
- UBICOM32_IO_PORT(RA)->function = 3;
- }
- break;
-
- case 1:
- /*
- * Channel 1 is in the upper half of PORT C ctl0 and ctl2 (PE4)
- */
- UBICOM32_IO_PORT(RC)->ctl0 &= ~0xFFFF0000;
- UBICOM32_IO_PORT(RC)->ctl0 |= (pwm_cfg << 16);
- UBICOM32_IO_PORT(RC)->ctl2 = ud->pdata->pwm_period << 16;
-
- /*
- * If the port function is not set, set it to GPIO/ExtIOInt
- */
- if (!UBICOM32_IO_PORT(RE)->function) {
- UBICOM32_IO_PORT(RE)->function = 3;
- }
- break;
-
- case 2:
- /*
- * Channel 2 is in PORT H ctl0 and ctl1 (PD0)
- */
- UBICOM32_IO_PORT(RH)->ctl0 &= ~0xFFFF0000;
- UBICOM32_IO_PORT(RH)->ctl0 = pwm_cfg;
- UBICOM32_IO_PORT(RH)->ctl1 = ud->pdata->pwm_period << 16;
-
- /*
- * If the port function is not set, set it to GPIO
- */
- if (!UBICOM32_IO_PORT(RD)->function) {
- UBICOM32_IO_PORT(RD)->function = 3;
- }
- break;
- }
-
- return 0;
-}
-
-/*
- * ubicom32bl_init_gpio
- * Allocate the appropriate GPIO
- */
-static int ubicom32bl_init_gpio(struct ubicom32bl_data *ud)
-{
- return 0;
-}
-
-static struct backlight_ops ubicom32bl_ops = {
- .get_brightness = ubicom32bl_get_intensity,
- .update_status = ubicom32bl_set_intensity,
-};
-
-/*
- * ubicom32bl_probe
- */
-static int ubicom32bl_probe(struct platform_device *pdev)
-{
- const struct ubicom32bl_platform_data *pdata = pdev->dev.platform_data;
- struct ubicom32bl_data *ud;
- struct backlight_device *bldev;
- int retval;
-
- /*
- * Check to see if we have any platform data, if we don't then the backlight is not
- * configured on this device.
- */
- if (!pdata) {
- return -ENODEV;
- }
-
- /*
- * Allocate our private data
- */
- ud = kzalloc(sizeof(struct ubicom32bl_data), GFP_KERNEL);
- if (!ud) {
- return -ENOMEM;
- }
-
- ud->pdata = pdata;
-
- /*
- * Check to see that the platform data is valid for this driver
- */
- switch (pdata->type) {
- case UBICOM32BL_TYPE_PWM:
- {
- /*
- * Make sure we have a PWM peripheral
- */
- u32_t chipid;
- asm volatile (
- "move.4 %0, CHIP_ID \n\t"
- : "=r" (chipid)
- );
- if (chipid != 0x00030001) {
- retval = -ENODEV;
- goto fail;
- }
-
- if (pdata->pwm_channel > 3) {
- retval = -ENODEV;
- goto fail;
- }
- if (pdata->pwm_prescale > 16) {
- retval = -EINVAL;
- goto fail;
- }
-
- ud->init_fn = ubicom32bl_init_hw_pwm;
- ud->set_intensity_fn = ubicom32bl_set_intensity_hw;
- break;
- }
-
- case UBICOM32BL_TYPE_PWM_HRT:
- // For now, PWM HRT devices are treated as binary lights.
-
- case UBICOM32BL_TYPE_BINARY:
- ud->init_fn = ubicom32bl_init_gpio;
- ud->set_intensity_fn = ubicom32bl_set_intensity_gpio;
- break;
- }
-
- /*
- * Register our backlight device
- */
- bldev = backlight_device_register(DRIVER_NAME, &pdev->dev, ud, &ubicom32bl_ops);
- if (IS_ERR(bldev)) {
- retval = PTR_ERR(bldev);
- goto fail;
- }
-
- ud->bldev = bldev;
- ud->cur_intensity = pdata->default_intensity;
- platform_set_drvdata(pdev, ud);
-
- /*
- * Start up the backlight at the prescribed default intensity
- */
- bldev->props.power = FB_BLANK_UNBLANK;
- bldev->props.max_brightness = UBICOM32BL_MAX_BRIGHTNESS;
- bldev->props.brightness = pdata->default_intensity;
-
- if (ud->init_fn) {
- if (ud->init_fn(ud) != 0) {
- retval = -ENODEV;
- backlight_device_unregister(ud->bldev);
- goto fail;
- }
- }
- ubicom32bl_set_intensity(bldev);
-
- printk(KERN_INFO DRIVER_NAME ": Backlight driver started\n");
-
- return 0;
-
-fail:
- platform_set_drvdata(pdev, NULL);
- kfree(ud);
- return retval;
-}
-
-/*
- * ubicom32bl_remove
- */
-static int __exit ubicom32bl_remove(struct platform_device *pdev)
-{
- struct ubicom32bl_data *ud = platform_get_drvdata(pdev);
-
- backlight_device_unregister(ud->bldev);
- platform_set_drvdata(pdev, NULL);
- kfree(ud);
-
- return 0;
-}
-
-static struct platform_driver ubicom32bl_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-
- .remove = __exit_p(ubicom32bl_remove),
-};
-
-/*
- * ubicom32bl_init
- */
-static int __init ubicom32bl_init(void)
-{
- return platform_driver_probe(&ubicom32bl_driver, ubicom32bl_probe);
-}
-module_init(ubicom32bl_init);
-
-/*
- * ubicom32bl_exit
- */
-static void __exit ubicom32bl_exit(void)
-{
- platform_driver_unregister(&ubicom32bl_driver);
-}
-module_exit(ubicom32bl_exit);
-
-MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
-MODULE_DESCRIPTION("Ubicom32 backlight driver");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * drivers/video/ubicom32lcd.c
- * LCD initilization code
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-
-#include <asm/ip5000.h>
-#include <asm/gpio.h>
-#include <asm/ubicom32lcd.h>
-
-#include "ubicom32lcd.h"
-
-#define DRIVER_NAME "ubicom32lcd"
-
-struct ubicom32lcd_data {
- const struct ubicom32lcd_panel *panel;
-
- int pin_cs;
- int pin_rd;
- int pin_rs;
- int pin_wr;
- int pin_reset;
- struct ubicom32_io_port *port_data;
- int data_shift;
-};
-
-/*
- * ubicom32lcd_write
- * Performs a write cycle on the bus (assumes CS asserted, RD & WR set)
- */
-static void ubicom32lcd_write(struct ubicom32lcd_data *ud, int command, u16 data)
-{
- if (command) {
- UBICOM32_GPIO_SET_PIN_LOW(ud->pin_rs);
- } else {
- UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rs);
- }
-
- asm volatile (
- "or.4 4(%[port]), 4(%[port]), %[mask] \n\t"
- "not.4 %[mask], %[mask] \n\t"
- "and.4 8(%[port]), 8(%[port]), %[mask] \n\t"
- "or.4 8(%[port]), 8(%[port]), %[cmd] \n\t"
- :
- : [port] "a" (ud->port_data),
- [mask] "d" (0xFFFF << ud->data_shift),
- [cmd] "d" (data << ud->data_shift)
- : "cc"
- );
-
- UBICOM32_GPIO_SET_PIN_LOW(ud->pin_wr);
-
- //ndelay(50);
- udelay(1);
-
- UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_wr);
-
- udelay(1);
- //ndelay(50);
-}
-
-/*
- * ubicom32lcd_read_data
- * Performs a read cycle on the bus (assumes CS asserted, RD & WR set)
- */
-static u16 ubicom32lcd_read_data(struct ubicom32lcd_data *ud)
-{
- u32_t data;
-
- UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rs);
-
- asm volatile (
- "and.4 4(%[port]), 4(%[port]), %[mask]\n\t"
- :
- : [port] "a" (ud->port_data),
- [mask] "d" (~(0xFFFF << ud->data_shift))
- : "cc"
- );
-
- UBICOM32_GPIO_SET_PIN_LOW(ud->pin_rd);
-
- ndelay(300);
-
- asm volatile (
- "lsr.4 %[data], 12(%[port]), %[shamt] \n\t"
- "and.4 %[data], %[data], %[mask] \n\t"
- : [data] "=d" (data)
- : [port] "a" (ud->port_data),
- [mask] "d" (0xFFFF),
- [shamt] "d" (ud->data_shift)
- : "cc"
- );
-
- ndelay(200);
-
- UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rd);
-
- ndelay(500);
-
- return data;
-}
-
-/*
- * ubicom32lcd_execute
- * Executes a script for performing operations on the LCD (assumes CS set)
- */
-static void ubicom32lcd_execute(struct ubicom32lcd_data *ud, const struct ubicom32lcd_step *script)
-{
- while (1) {
- switch (script->op) {
- case LCD_STEP_CMD:
- ubicom32lcd_write(ud, 1, script->cmd);
- break;
-
- case LCD_STEP_DATA:
- ubicom32lcd_write(ud, 0, script->data);
- break;
-
- case LCD_STEP_CMD_DATA:
- ubicom32lcd_write(ud, 1, script->cmd);
- ubicom32lcd_write(ud, 0, script->data);
- break;
-
- case LCD_STEP_SLEEP:
- udelay(script->data);
- break;
-
- case LCD_STEP_DONE:
- return;
- }
- script++;
- }
-}
-
-/*
- * ubicom32lcd_goto
- * Places the gram pointer at a specific X, Y address
- */
-static void ubicom32lcd_goto(struct ubicom32lcd_data *ud, int x, int y)
-{
- ubicom32lcd_write(ud, 1, ud->panel->horz_reg);
- ubicom32lcd_write(ud, 0, x);
- ubicom32lcd_write(ud, 1, ud->panel->vert_reg);
- ubicom32lcd_write(ud, 0, y);
- ubicom32lcd_write(ud, 1, ud->panel->gram_reg);
-}
-
-/*
- * ubicom32lcd_panel_init
- * Initializes the lcd panel.
- */
-static int ubicom32lcd_panel_init(struct ubicom32lcd_data *ud)
-{
- u16 id;
-
- UBICOM32_GPIO_SET_PIN_LOW(ud->pin_reset);
- UBICOM32_GPIO_SET_PIN_OUTPUT(ud->pin_reset);
- UBICOM32_GPIO_ENABLE(ud->pin_reset);
-
- asm volatile (
- "or.4 0x50(%[port]), 0x50(%[port]), %[mask] \n\t"
- "not.4 %[mask], %[mask] \n\t"
- "and.4 0x04(%[port]), 0x04(%[port]), %[mask] \n\t"
- :
- : [port] "a" (ud->port_data),
- [mask] "d" (0xFFFF << ud->data_shift)
- : "cc"
- );
-
- UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rs);
- UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rd);
- UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_wr);
- UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_cs);
-
- UBICOM32_GPIO_SET_PIN_OUTPUT(ud->pin_rs);
- UBICOM32_GPIO_SET_PIN_OUTPUT(ud->pin_rd);
- UBICOM32_GPIO_SET_PIN_OUTPUT(ud->pin_wr);
- UBICOM32_GPIO_SET_PIN_OUTPUT(ud->pin_cs);
-
- UBICOM32_GPIO_ENABLE(ud->pin_rs);
- UBICOM32_GPIO_ENABLE(ud->pin_rd);
- UBICOM32_GPIO_ENABLE(ud->pin_wr);
- UBICOM32_GPIO_ENABLE(ud->pin_cs);
-
- udelay(20);
-
- UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_reset);
-
- udelay(20);
-
- UBICOM32_GPIO_SET_PIN_LOW(ud->pin_cs);
-
- id = ubicom32lcd_read_data(ud);
-
- /*
- * We will try to figure out what kind of panel we have if we were not told.
- */
- if (!ud->panel) {
- const struct ubicom32lcd_panel **p = ubicom32lcd_panels;
- while (*p) {
- if ((*p)->id && ((*p)->id == id)) {
- break;
- }
- p++;
- }
- if (!*p) {
- printk(KERN_WARNING DRIVER_NAME ":Could not find compatible panel, id=%x\n", id);
- return -ENODEV;
- }
- ud->panel = *p;
- }
-
- /*
- * Make sure panel ID matches if we were supplied a panel type
- */
- if (ud->panel->id && (ud->panel->id != id)) {
- UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_cs);
-
- return -ENODEV;
- }
-
- ubicom32lcd_execute(ud, ud->panel->init_seq);
-
- ubicom32lcd_goto(ud, 0, 0);
-
- UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_cs);
- UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rd);
- UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_wr);
- UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rs);
-
- printk(KERN_INFO DRIVER_NAME ": Initialized panel %s\n", ud->panel->desc);
-
- return 0;
-}
-
-/*
- * ubicom32lcd_probe
- */
-static int ubicom32lcd_probe(struct platform_device *pdev)
-{
- const struct ubicom32lcd_platform_data *pdata = pdev->dev.platform_data;
- struct ubicom32lcd_data *ud;
- int retval;
-
- /*
- * Allocate our private data
- */
- ud = kzalloc(sizeof(struct ubicom32lcd_data), GFP_KERNEL);
- if (!ud) {
- return -ENOMEM;
- }
-
- if (pdata) {
- ud->pin_cs = pdata->pin_cs;
- ud->pin_rd = pdata->pin_rd;
- ud->pin_wr = pdata->pin_wr;
- ud->pin_rs = pdata->pin_rs;
- ud->pin_reset = pdata->pin_reset;
- ud->port_data = pdata->port_data;
- ud->data_shift = pdata->data_shift;
- } else {
- /*
- * Defaults
- */
- ud->pin_cs = GPIO_RD_4;
- ud->pin_rd = GPIO_RD_5;
- ud->pin_rs = GPIO_RD_3;
- ud->pin_wr = GPIO_RD_2;
- ud->pin_reset = GPIO_RD_7;
- ud->port_data = (struct ubicom32_io_port *)RI;
- ud->data_shift = 0;
- }
-
- /*
- * Initialize the display
- */
- retval = ubicom32lcd_panel_init(ud);
- if (retval) {
- kfree(ud);
- return retval;
- }
-
- printk(KERN_INFO DRIVER_NAME ": LCD initialized\n");
-
- return 0;
-}
-
-/*
- * ubicom32lcd_remove
- */
-static int __exit ubicom32lcd_remove(struct platform_device *pdev)
-{
- struct ubicom32lcd_data *ud = platform_get_drvdata(pdev);
-
- kfree(ud);
-
- return 0;
-}
-
-static struct platform_driver ubicom32lcd_driver = {
- .probe = ubicom32lcd_probe,
- .remove = ubicom32lcd_remove,
-
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-
- .remove = __exit_p(ubicom32lcd_remove),
-};
-
-static struct platform_device *ubicom32lcd_device;
-
-/*
- * ubicom32lcd_init
- */
-static int __init ubicom32lcd_init(void)
-{
- int res;
-
- res = platform_driver_register(&ubicom32lcd_driver);
- if (res == 0) {
- ubicom32lcd_device = platform_device_alloc(DRIVER_NAME, 0);
- if (ubicom32lcd_device) {
- res = platform_device_add(ubicom32lcd_device);
- } else {
- res = -ENOMEM;
- }
- if (res) {
- platform_device_put(ubicom32lcd_device);
- platform_driver_unregister(&ubicom32lcd_driver);
- }
- }
- return res;
-}
-module_init(ubicom32lcd_init);
-
-/*
- * ubicom32lcd_exit
- */
-static void __exit ubicom32lcd_exit(void)
-{
- platform_device_unregister(ubicom32lcd_device);
- platform_driver_unregister(&ubicom32lcd_driver);
-}
-module_exit(ubicom32lcd_exit);
-
-MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
-MODULE_DESCRIPTION("Ubicom32 LCD driver");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * ubicom32lcd.h
- * Ubicom32 lcd panel drivers
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * This Ubicom32 library is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * This Ubicom32 library is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef _UBICOM32LCD_H_
-#define _UBICOM32LCD_H_
-
-enum ubicom32lcd_op {
- /*
- * Sleep for (data) ms
- */
- LCD_STEP_SLEEP,
-
- /*
- * Execute write of command
- */
- LCD_STEP_CMD,
-
- /*
- * Execute write of data
- */
- LCD_STEP_DATA,
-
- /*
- * Execute write of command/data
- */
- LCD_STEP_CMD_DATA,
-
- /*
- * Script done
- */
- LCD_STEP_DONE,
-};
-
-struct ubicom32lcd_step {
- enum ubicom32lcd_op op;
- u16 cmd;
- u16 data;
-};
-
-struct ubicom32lcd_panel {
- const struct ubicom32lcd_step *init_seq;
- const char *desc;
-
- u32 xres;
- u32 yres;
- u32 stride;
- u32 flags;
-
- u16 id;
- u16 horz_reg;
- u16 vert_reg;
- u16 gram_reg;
-};
-
-#ifdef CONFIG_LCD_UBICOM32_CFAF240320KTTS
-static const struct ubicom32lcd_step cfaf240320ktts_init_0[] = {
- {LCD_STEP_CMD_DATA, 0x0001, 0x0000,}, // Driver Output Control Register (R01h) Page 14, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0002, 0x0700,}, // LCD Driving Waveform Control (R02h) Page 15, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0003, 0x50A0,}, // Entry Mode (R03h) 0 degrees
- {LCD_STEP_CMD_DATA, 0x0004, 0x0000,}, // Scaling Control register (R04h) Page 16, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0008, 0x0207,}, // Display Control 2 (R08h) Page 17, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0009, 0x0000,}, // Display Control 3 (R09h) Page 18, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x000A, 0x0000,}, // Frame Cycle Control (R0Ah) Page 19, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x000C, 0x0000,}, // External Display Interface Control 1 (R0Ch) Page 20, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x000D, 0x0000,}, // Frame Maker Position (R0Dh) Page 21, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x000F, 0x0000,}, // External Display Interface Control 2 (R0Fh) Page 21, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0010, 0x0000,}, // Power Control 1 (R10h) Page 22, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0011, 0x0007,}, // Power Control 2 (R11h) Page 23, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0012, 0x0000,}, // Power Control 3 (R12h) Page 24, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0013, 0x0000,}, // Power Control 4 (R13h) Page 25, SPFD5408B Datasheet
- {LCD_STEP_SLEEP, 0, 200},
- {LCD_STEP_CMD_DATA, 0x0007, 0x0101,}, // Display Control (R07h) Page 16, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0010, 0x12B0,}, // Power Control 1 (R10h) Page 22, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0011, 0x0007,}, // Power Control 2 (R11h) Page 23, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0012, 0x01BB,}, // Power Control 3 (R12h) Page 24, SPFD5408B Datasheet
- {LCD_STEP_SLEEP, 0, 50},
- {LCD_STEP_CMD_DATA, 0x0013, 0x1300,}, // Power Control 4 (R13h) Page 25, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0029, 0x0010,}, // NVM read data 2 (R29h) Page 30, SPFD5408B Datasheet
- {LCD_STEP_SLEEP, 0, 50},
- {LCD_STEP_CMD_DATA, 0x0030, 0x000A,}, // Gamma Control 1 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0031, 0x1326,}, // Gamma Control 2 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0032, 0x0A29,}, // Gamma Control 3 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0033, 0x290A,}, // Gamma Control 4 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0034, 0x2613,}, // Gamma Control 5 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0035, 0x0A0A,}, // Gamma Control 6 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0036, 0x1E03,}, // Gamma Control 7 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0037, 0x031E,}, // Gamma Control 8 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0038, 0x0706,}, // Gamma Control 9 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0039, 0x0303,}, // Gamma Control 10 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x003A, 0x0E04,}, // Gamma Control 11 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x003B, 0x0E01,}, // Gamma Control 12 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x003C, 0x010E,}, // Gamma Control 13 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x003D, 0x040E,}, // Gamma Control 14 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x003E, 0x0303,}, // Gamma Control 15 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x003F, 0x0607,}, // Gamma Control 16 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0050, 0x0000,}, // Window Horizontal RAM Address Start (R50h) Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0051, 0x00EF,}, // Window Horizontal RAM Address End (R51h) Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0052, 0x0000,}, // Window Vertical RAM Address Start (R52h) Page 33, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0053, 0x013F,}, // Window Vertical RAM Address End (R53h) Page 33, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0060, 0x2700,}, // Driver Output Control (R60h) Page 33, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0061, 0x0001,}, // Driver Output Control (R61h) Page 35, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x006A, 0x0000,}, // Vertical Scroll Control (R6Ah) Page 35, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0080, 0x0000,}, // Display Position - Partial Display 1 (R80h) Page 35, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0081, 0x0000,}, // RAM Address Start - Partial Display 1 (R81h) Page 35, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0082, 0x0000,}, // RAM Address End - Partial Display 1 (R82h) Page 36, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0083, 0x0000,}, // Display Position - Partial Display 2 (R83h) Page 36, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0084, 0x0000,}, // RAM Address Start - Partial Display 2 (R84h) Page 36, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0085, 0x0000,}, // RAM Address End - Partial Display 2 (R85h) Page 36, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0090, 0x0010,}, // Panel Interface Control 1 (R90h) Page 36, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0092, 0x0000,}, // Panel Interface Control 2 (R92h) Page 37, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0093, 0x0103,}, // Panel Interface control 3 (R93h) Page 38, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0095, 0x0210,}, // Panel Interface control 4 (R95h) Page 38, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0097, 0x0000,}, // Panel Interface Control 5 (R97h) Page 40, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0098, 0x0000,}, // Panel Interface Control 6 (R98h) Page 41, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0007, 0x0173,}, // Display Control (R07h) Page 16, SPFD5408B Datasheet
- {LCD_STEP_DONE, 0, 0},
-};
-
-const struct ubicom32lcd_panel cfaf240320ktts_0 = {
- .desc = "CFAF240320KTTS",
- .init_seq = cfaf240320ktts_init_0,
- .horz_reg = 0x20,
- .vert_reg = 0x21,
- .gram_reg = 0x22,
- .xres = 240,
- .yres = 320,
- .stride = 240,
- .id = 0x5408,
-};
-#endif
-
-#ifdef CONFIG_LCD_UBICOM32_CFAF240320KTTS_180
-static const struct ubicom32lcd_step cfaf240320ktts_init_180[] = {
- {LCD_STEP_CMD_DATA, 0x0001, 0x0000,}, // Driver Output Control Register (R01h) Page 14, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0002, 0x0700,}, // LCD Driving Waveform Control (R02h) Page 15, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0003, 0x5000,}, // Entry Mode (R03h) 180 degrees
- {LCD_STEP_CMD_DATA, 0x0004, 0x0000,}, // Scaling Control register (R04h) Page 16, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0008, 0x0207,}, // Display Control 2 (R08h) Page 17, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0009, 0x0000,}, // Display Control 3 (R09h) Page 18, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x000A, 0x0000,}, // Frame Cycle Control (R0Ah) Page 19, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x000C, 0x0000,}, // External Display Interface Control 1 (R0Ch) Page 20, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x000D, 0x0000,}, // Frame Maker Position (R0Dh) Page 21, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x000F, 0x0000,}, // External Display Interface Control 2 (R0Fh) Page 21, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0010, 0x0000,}, // Power Control 1 (R10h) Page 22, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0011, 0x0007,}, // Power Control 2 (R11h) Page 23, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0012, 0x0000,}, // Power Control 3 (R12h) Page 24, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0013, 0x0000,}, // Power Control 4 (R13h) Page 25, SPFD5408B Datasheet
- {LCD_STEP_SLEEP, 0, 200},
- {LCD_STEP_CMD_DATA, 0x0007, 0x0101,}, // Display Control (R07h) Page 16, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0010, 0x12B0,}, // Power Control 1 (R10h) Page 22, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0011, 0x0007,}, // Power Control 2 (R11h) Page 23, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0012, 0x01BB,}, // Power Control 3 (R12h) Page 24, SPFD5408B Datasheet
- {LCD_STEP_SLEEP, 0, 50},
- {LCD_STEP_CMD_DATA, 0x0013, 0x1300,}, // Power Control 4 (R13h) Page 25, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0029, 0x0010,}, // NVM read data 2 (R29h) Page 30, SPFD5408B Datasheet
- {LCD_STEP_SLEEP, 0, 50},
- {LCD_STEP_CMD_DATA, 0x0030, 0x000A,}, // Gamma Control 1 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0031, 0x1326,}, // Gamma Control 2 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0032, 0x0A29,}, // Gamma Control 3 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0033, 0x290A,}, // Gamma Control 4 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0034, 0x2613,}, // Gamma Control 5 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0035, 0x0A0A,}, // Gamma Control 6 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0036, 0x1E03,}, // Gamma Control 7 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0037, 0x031E,}, // Gamma Control 8 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0038, 0x0706,}, // Gamma Control 9 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0039, 0x0303,}, // Gamma Control 10 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x003A, 0x0E04,}, // Gamma Control 11 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x003B, 0x0E01,}, // Gamma Control 12 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x003C, 0x010E,}, // Gamma Control 13 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x003D, 0x040E,}, // Gamma Control 14 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x003E, 0x0303,}, // Gamma Control 15 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x003F, 0x0607,}, // Gamma Control 16 Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0050, 0x0000,}, // Window Horizontal RAM Address Start (R50h) Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0051, 0x00EF,}, // Window Horizontal RAM Address End (R51h) Page 32, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0052, 0x0000,}, // Window Vertical RAM Address Start (R52h) Page 33, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0053, 0x013F,}, // Window Vertical RAM Address End (R53h) Page 33, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0060, 0x2700,}, // Driver Output Control (R60h) Page 33, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0061, 0x0001,}, // Driver Output Control (R61h) Page 35, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x006A, 0x0000,}, // Vertical Scroll Control (R6Ah) Page 35, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0080, 0x0000,}, // Display Position - Partial Display 1 (R80h) Page 35, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0081, 0x0000,}, // RAM Address Start - Partial Display 1 (R81h) Page 35, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0082, 0x0000,}, // RAM Address End - Partial Display 1 (R82h) Page 36, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0083, 0x0000,}, // Display Position - Partial Display 2 (R83h) Page 36, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0084, 0x0000,}, // RAM Address Start - Partial Display 2 (R84h) Page 36, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0085, 0x0000,}, // RAM Address End - Partial Display 2 (R85h) Page 36, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0090, 0x0010,}, // Panel Interface Control 1 (R90h) Page 36, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0092, 0x0000,}, // Panel Interface Control 2 (R92h) Page 37, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0093, 0x0103,}, // Panel Interface control 3 (R93h) Page 38, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0095, 0x0210,}, // Panel Interface control 4 (R95h) Page 38, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0097, 0x0000,}, // Panel Interface Control 5 (R97h) Page 40, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0098, 0x0000,}, // Panel Interface Control 6 (R98h) Page 41, SPFD5408B Datasheet
- {LCD_STEP_CMD_DATA, 0x0007, 0x0173,}, // Display Control (R07h) Page 16, SPFD5408B Datasheet
- {LCD_STEP_DONE, 0, 0},
-};
-
-const struct ubicom32lcd_panel cfaf240320ktts_180 = {
- .desc = "CFAF240320KTTS 180",
- .init_seq = cfaf240320ktts_init_180,
- .horz_reg = 0x20,
- .vert_reg = 0x21,
- .gram_reg = 0x22,
- .xres = 240,
- .yres = 320,
- .stride = 240,
- .id = 0x5408,
-};
-#endif
-
-#ifdef CONFIG_LCD_UBICOM32_TFT2N0369E_P
-static const struct ubicom32lcd_step tft2n0369ep_init[] = {
- {LCD_STEP_CMD_DATA, 0x0028, 0x0006},
- {LCD_STEP_CMD_DATA, 0x0000, 0x0001},
- {LCD_STEP_SLEEP, 0, 15},
- {LCD_STEP_CMD_DATA, 0x002B, 0x9532},
- {LCD_STEP_CMD_DATA, 0x0003, 0xAAAC},
- {LCD_STEP_CMD_DATA, 0x000C, 0x0002},
- {LCD_STEP_CMD_DATA, 0x000D, 0x000A},
- {LCD_STEP_CMD_DATA, 0x000E, 0x2C00},
- {LCD_STEP_CMD_DATA, 0x001E, 0x00AA},
- {LCD_STEP_CMD_DATA, 0x0025, 0x8000},
- {LCD_STEP_SLEEP, 0, 15},
- {LCD_STEP_CMD_DATA, 0x0001, 0x2B3F},
- {LCD_STEP_CMD_DATA, 0x0002, 0x0600},
- {LCD_STEP_CMD_DATA, 0x0010, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0011, 0x6030},
- {LCD_STEP_SLEEP, 0, 20},
- {LCD_STEP_CMD_DATA, 0x0005, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0006, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0016, 0xEF1C},
- {LCD_STEP_CMD_DATA, 0x0017, 0x0003},
- {LCD_STEP_CMD_DATA, 0x0007, 0x0233},
- {LCD_STEP_CMD_DATA, 0x000B, 0x5312},
- {LCD_STEP_CMD_DATA, 0x000F, 0x0000},
- {LCD_STEP_SLEEP, 0, 20},
- {LCD_STEP_CMD_DATA, 0x0041, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0042, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0048, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0049, 0x013F},
- {LCD_STEP_CMD_DATA, 0x0044, 0xEF00},
- {LCD_STEP_CMD_DATA, 0x0045, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0046, 0x013F},
- {LCD_STEP_CMD_DATA, 0x004A, 0x0000},
- {LCD_STEP_CMD_DATA, 0x004B, 0x0000},
- {LCD_STEP_SLEEP, 0, 20},
- {LCD_STEP_CMD_DATA, 0x0030, 0x0707},
- {LCD_STEP_CMD_DATA, 0x0031, 0x0704},
- {LCD_STEP_CMD_DATA, 0x0032, 0x0204},
- {LCD_STEP_CMD_DATA, 0x0033, 0x0201},
- {LCD_STEP_CMD_DATA, 0x0034, 0x0203},
- {LCD_STEP_CMD_DATA, 0x0035, 0x0204},
- {LCD_STEP_CMD_DATA, 0x0036, 0x0204},
- {LCD_STEP_CMD_DATA, 0x0037, 0x0502},
- {LCD_STEP_CMD_DATA, 0x003A, 0x0302},
- {LCD_STEP_CMD_DATA, 0x003B, 0x0500},
- {LCD_STEP_SLEEP, 0, 20},
- {LCD_STEP_CMD_DATA, 0x0044, 239 << 8 | 0},
- {LCD_STEP_CMD_DATA, 0x0045, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0046, 319},
- {LCD_STEP_DONE, 0, 0},
-};
-
-const struct ubicom32lcd_panel tft2n0369ep = {
- .desc = "TFT2N0369E-Portrait",
- .init_seq = tft2n0369ep_init,
- .horz_reg = 0x4e,
- .vert_reg = 0x4f,
- .gram_reg = 0x22,
- .xres = 240,
- .yres = 320,
- .stride = 240,
- .id = 0x8989,
-};
-#endif
-
-#ifdef CONFIG_LCD_UBICOM32_TFT2N0369E_L
-static const struct ubicom32lcd_step tft2n0369e_init[] = {
- {LCD_STEP_CMD_DATA, 0x0028, 0x0006},
- {LCD_STEP_CMD_DATA, 0x0000, 0x0001},
- {LCD_STEP_SLEEP, 0, 15},
- {LCD_STEP_CMD_DATA, 0x002B, 0x9532},
- {LCD_STEP_CMD_DATA, 0x0003, 0xAAAC},
- {LCD_STEP_CMD_DATA, 0x000C, 0x0002},
- {LCD_STEP_CMD_DATA, 0x000D, 0x000A},
- {LCD_STEP_CMD_DATA, 0x000E, 0x2C00},
- {LCD_STEP_CMD_DATA, 0x001E, 0x00AA},
- {LCD_STEP_CMD_DATA, 0x0025, 0x8000},
- {LCD_STEP_SLEEP, 0, 15},
- {LCD_STEP_CMD_DATA, 0x0001, 0x2B3F},
- {LCD_STEP_CMD_DATA, 0x0002, 0x0600},
- {LCD_STEP_CMD_DATA, 0x0010, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0011, 0x60A8},
- {LCD_STEP_SLEEP, 0, 20},
- {LCD_STEP_CMD_DATA, 0x0005, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0006, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0016, 0xEF1C},
- {LCD_STEP_CMD_DATA, 0x0017, 0x0003},
- {LCD_STEP_CMD_DATA, 0x0007, 0x0233},
- {LCD_STEP_CMD_DATA, 0x000B, 0x5312},
- {LCD_STEP_CMD_DATA, 0x000F, 0x0000},
- {LCD_STEP_SLEEP, 0, 20},
- {LCD_STEP_CMD_DATA, 0x0041, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0042, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0048, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0049, 0x013F},
- {LCD_STEP_CMD_DATA, 0x0044, 0xEF00},
- {LCD_STEP_CMD_DATA, 0x0045, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0046, 0x013F},
- {LCD_STEP_CMD_DATA, 0x004A, 0x0000},
- {LCD_STEP_CMD_DATA, 0x004B, 0x0000},
- {LCD_STEP_SLEEP, 0, 20},
- {LCD_STEP_CMD_DATA, 0x0030, 0x0707},
- {LCD_STEP_CMD_DATA, 0x0031, 0x0704},
- {LCD_STEP_CMD_DATA, 0x0032, 0x0204},
- {LCD_STEP_CMD_DATA, 0x0033, 0x0201},
- {LCD_STEP_CMD_DATA, 0x0034, 0x0203},
- {LCD_STEP_CMD_DATA, 0x0035, 0x0204},
- {LCD_STEP_CMD_DATA, 0x0036, 0x0204},
- {LCD_STEP_CMD_DATA, 0x0037, 0x0502},
- {LCD_STEP_CMD_DATA, 0x003A, 0x0302},
- {LCD_STEP_CMD_DATA, 0x003B, 0x0500},
- {LCD_STEP_SLEEP, 0, 20},
- {LCD_STEP_CMD_DATA, 0x0044, 239 << 8 | 0},
- {LCD_STEP_CMD_DATA, 0x0045, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0046, 319},
- {LCD_STEP_DONE, 0, 0},
-};
-
-const struct ubicom32lcd_panel tft2n0369e = {
- .desc = "TFT2N0369E-Landscape",
- .init_seq = tft2n0369e_init,
- .horz_reg = 0x4e,
- .vert_reg = 0x4f,
- .gram_reg = 0x22,
- .xres = 320,
- .yres = 240,
- .stride = 320,
- .id = 0x8989,
-};
-#endif
-
-#ifdef CONFIG_LCD_UBICOM32_CFAF240400D
-static const struct ubicom32lcd_step cfaf240400d_init[] = {
- {LCD_STEP_CMD_DATA, 0x0606, 0x0000}, // Pin Control (R606h) // Page 41 of SPFD5420A Datasheet
- {LCD_STEP_SLEEP, 0, 50},
- {LCD_STEP_CMD_DATA, 0x0007, 0x0001}, // Display Control 1 (R007h) // Page 16 of SPFD5420A Datasheet
- {LCD_STEP_SLEEP, 0, 50},
- {LCD_STEP_CMD_DATA, 0x0110, 0x0001}, // Power Control 6(R110h) // Page 30 of SPFD5420A Datasheet
- {LCD_STEP_SLEEP, 0, 50},
- {LCD_STEP_CMD_DATA, 0x0100, 0x17B0}, // Power Control 1 (R100h) // Page 26 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0101, 0x0147}, // Power Control 2 (R101h) // Page 27 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0102, 0x019D}, // Power Control 3 (R102h) // Page 28 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0103, 0x3600}, // Power Control 4 (R103h) // Page 29 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0281, 0x0010}, // NVM read data 2 (R281h) // Page 34 of SPFD5420A Datasheet
- {LCD_STEP_SLEEP, 0, 50},
- {LCD_STEP_CMD_DATA, 0x0102, 0x01BD}, // Power Control 3 (R102h) // Page 28 of SPFD5420A Datasheet
- {LCD_STEP_SLEEP, 0, 50},
-
- //--------------- Power control 1~6 ---------------//
- {LCD_STEP_CMD_DATA, 0x0100, 0x16B0}, // Power Control 1 (R100h) // Page 26 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0101, 0x0147}, // Power Control 2 (R101h) // Page 27 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0102, 0x01BD}, // Power Control 3 (R102h) // Page 28 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0103, 0x2d00}, // Power Control 4 (R103h) // Page 29 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0107, 0x0000}, // Power Control 5 (R107h) // Page 30 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0110, 0x0001}, // Power Control 6(R110h) // Page 30 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0280, 0x0000}, // NVM read data 1 (R280h) // Page 33 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0281, 0x0006}, // NVM read data 2 (R281h) // Page 34 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0282, 0x0000}, // NVM read data 3 (R282h) // Page 34 of SPFD5420A Datasheet
-
- //------- Gamma 2.2 control (R300h to R30Fh) ------//
- {LCD_STEP_CMD_DATA, 0x0300, 0x0101},
- {LCD_STEP_CMD_DATA, 0x0301, 0x0b27},
- {LCD_STEP_CMD_DATA, 0x0302, 0x132a},
- {LCD_STEP_CMD_DATA, 0x0303, 0x2a13},
- {LCD_STEP_CMD_DATA, 0x0304, 0x270b},
- {LCD_STEP_CMD_DATA, 0x0305, 0x0101},
- {LCD_STEP_CMD_DATA, 0x0306, 0x1205},
- {LCD_STEP_CMD_DATA, 0x0307, 0x0512},
- {LCD_STEP_CMD_DATA, 0x0308, 0x0005},
- {LCD_STEP_CMD_DATA, 0x0309, 0x0003},
- {LCD_STEP_CMD_DATA, 0x030A, 0x0f04},
- {LCD_STEP_CMD_DATA, 0x030B, 0x0f00},
- {LCD_STEP_CMD_DATA, 0x030C, 0x000f},
- {LCD_STEP_CMD_DATA, 0x030D, 0x040f},
- {LCD_STEP_CMD_DATA, 0x030E, 0x0300},
- {LCD_STEP_CMD_DATA, 0x030F, 0x0500},
-
- {LCD_STEP_CMD_DATA, 0x0400, 0x3500}, // Base Image Number of Line (R400h) // Page 36 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0401, 0x0001}, // Base Image Display Control (R401h) // Page 39 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0404, 0x0000}, // Based Image Vertical Scroll Control (R404h) // Page 40 of SPFD5420A Datasheet
-
- //--------------- Normal set ---------------//
- {LCD_STEP_CMD_DATA, 0x0000, 0x0000}, // ID Read Register (R000h) // Page 13 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0001, 0x0100}, // Driver Output Control Register (R001h) // Page 14 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0002, 0x0100}, // LCD Driving Waveform Control (R002h) // Page 14 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0003, 0x1030}, // Entry Mode (R003h) // Page 15 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0006, 0x0000}, // Display Control 1 (R007h) // Page 16 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0008, 0x0808}, // Display Control 2 (R008h) // Page 17 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0009, 0x0001}, // Display Control 3 (R009h) // Page 18 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x000B, 0x0010}, // Low Power Control (R00Bh) // Page 19 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x000C, 0x0000}, // External Display Interface Control 1 (R00Ch) // Page 19 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x000F, 0x0000}, // External Display Interface Control 2 (R00Fh) // Page 20 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0007, 0x0001}, // Display Control 1 (R007h) // Page 16 of SPFD5420A Datasheet
-
- //--------------- Panel interface control 1~6 ---------------//
- {LCD_STEP_CMD_DATA, 0x0010, 0x0012}, // Panel Interface Control 1 (R010h) // Page 20 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0011, 0x0202}, // Panel Interface Control 2 (R011h) // Page 21 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0012, 0x0300}, // Panel Interface control 3 (R012h) // Page 22 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0020, 0x021E}, // Panel Interface control 4 (R020h) // Page 22 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0021, 0x0202}, // Panel Interface Control 5 (021Rh) // Page 24 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0022, 0x0100}, // Panel Interface Control 6 (R022h) // Page 25 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0090, 0x8000}, // Frame Marker Control (R090h) // Page 25 of SPFD5420A Datasheet
-
- //--------------- Partial display ---------------//
- {LCD_STEP_CMD_DATA, 0x0210, 0x0000}, // Window Horizontal RAM Address Start (R210h) // Page 35 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0211, 0x00EF}, // Window Horziontal RAM Address End (R211h) // Page 35 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0212, 0x0000}, // Window Vertical RAM Address Start (R212h) // Page 35 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0213, 0x018F}, // Window Vertical RAM Address End (R213h) // Page 35 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0500, 0x0000}, // Display Position - Partial Display 1 (R500h) // Page 40 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0501, 0x0000}, // RAM Address Start - Partial Display 1 (R501h)// Page 40 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0502, 0x0000}, // RAM Address End - Partail Display 1 (R502h) // Page 40 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0503, 0x0000}, // Display Position - Partial Display 2 (R503h) // Page 40 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0504, 0x0000}, // RAM Address Start . Partial Display 2 (R504h)// Page 41 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0505, 0x0000}, // RAM Address End . Partial Display 2 (R505h) // Page 41 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0606, 0x0000}, // Pin Control (R606h) // Page 41 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x06F0, 0x0000}, // NVM Access Control (R6F0h) // Page 41 of SPFD5420A Datasheet
- {LCD_STEP_CMD_DATA, 0x0007, 0x0173}, // Display Control 1 (R007h) // Page 16 of SPFD5420A Datasheet
- {LCD_STEP_SLEEP, 0, 50},
- {LCD_STEP_CMD_DATA, 0x0007, 0x0171}, // Display Control 1 (R007h) // Page 16 of SPFD5420A Datasheet
- {LCD_STEP_SLEEP, 0, 10},
- {LCD_STEP_CMD_DATA, 0x0007, 0x0173}, // Display Control 1 (R007h) // Page 16 of SPFD5420A Datasheet
- {LCD_STEP_DONE, 0, 0},
-};
-
-const struct ubicom32lcd_panel cfaf240400d = {
- .desc = "CFAF240400D",
- .init_seq = cfaf240400d_init,
- .horz_reg = 0x0200,
- .vert_reg = 0x0201,
- .gram_reg = 0x0202,
- .xres = 240,
- .yres = 400,
- .stride = 240,
- .id = 0x5420,
-};
-#endif
-
-#ifdef CONFIG_LCD_UBICOM32_CFAF240400F
-static const struct ubicom32lcd_step cfaf320240f_init[] = {
- {LCD_STEP_CMD_DATA, 0x0028, 0x0006}, // VCOM OTP Page 55-56 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x0000, 0x0001}, // start Oscillator Page 36 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x0010, 0x0000}, // Sleep mode Page 49 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x0001, 0x32EF}, // Driver Output Control Page 36-39 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x0002, 0x0600}, // LCD Driving Waveform Control Page 40-42 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x0003, 0x6A38}, // Power Control 1 Page 43-44 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x0011, 0x6870}, // Entry Mode Page 50-52 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0X000F, 0x0000}, // Gate Scan Position Page 49 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0X000B, 0x5308}, // Frame Cycle Control Page 45 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x000C, 0x0003}, // Power Control 2 Page 47 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x000D, 0x000A}, // Power Control 3 Page 48 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x000E, 0x2E00}, // Power Control 4 Page 48 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x001E, 0x00BE}, // Power Control 5 Page 53 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x0025, 0x8000}, // Frame Frequency Control Page 53 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x0026, 0x7800}, // Analog setting Page 54 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x004E, 0x0000}, // Ram Address Set Page 58 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x004F, 0x0000}, // Ram Address Set Page 58 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x0012, 0x08D9}, // Sleep mode Page 49 of SSD2119 datasheet
-
- // Gamma Control (R30h to R3Bh) -- Page 56 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x0030, 0x0000},
- {LCD_STEP_CMD_DATA, 0x0031, 0x0104},
- {LCD_STEP_CMD_DATA, 0x0032, 0x0100},
- {LCD_STEP_CMD_DATA, 0x0033, 0x0305},
- {LCD_STEP_CMD_DATA, 0x0034, 0x0505},
- {LCD_STEP_CMD_DATA, 0x0035, 0x0305},
- {LCD_STEP_CMD_DATA, 0x0036, 0x0707},
- {LCD_STEP_CMD_DATA, 0x0037, 0x0300},
- {LCD_STEP_CMD_DATA, 0x003A, 0x1200},
- {LCD_STEP_CMD_DATA, 0x003B, 0x0800},
-
- {LCD_STEP_CMD_DATA, 0x0007, 0x0033}, // Display Control Page 45 of SSD2119 datasheet
-
- {LCD_STEP_CMD_DATA, 0x0044, 0xEF00}, // Vertical RAM address position Page 57 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x0045, 0x0000}, // Horizontal RAM address position Page 57 of SSD2119 datasheet
- {LCD_STEP_CMD_DATA, 0x0046, 0x013F}, // Horizontal RAM address position Page 57 of SSD2119 datasheet
-
- {LCD_STEP_SLEEP, 0, 150},
-
- {LCD_STEP_DONE, 0, 0},
-};
-
-const struct ubicom32lcd_panel cfaf320240f = {
- .desc = "CFAF320240F",
- .init_seq = cfaf320240f_init,
- .horz_reg = 0x4e,
- .vert_reg = 0x4f,
- .gram_reg = 0x22,
- .xres = 320,
- .yres = 240,
- .stride = 320,
- .id = 0x9919,
-};
-#endif
-
-const struct ubicom32lcd_panel *ubicom32lcd_panels[] = {
-#ifdef CONFIG_LCD_UBICOM32_CFAF240400KTTS_180
- &cfaf240320ktts_180,
-#endif
-#ifdef CONFIG_LCD_UBICOM32_CFAF240400KTTS
- &cfaf240320ktts_0,
-#endif
-#ifdef CONFIG_LCD_UBICOM32_CFAF240400D
- &cfaf240400d,
-#endif
-#ifdef CONFIG_LCD_UBICOM32_TFT2N0369E_P
- &tft2n0369ep,
-#endif
-#ifdef CONFIG_LCD_UBICOM32_TFT2N0369E_L
- &tft2n0369e,
-#endif
-#ifdef CONFIG_LCD_UBICOM32_CFAF240400F
- &cfaf320240f,
-#endif
- NULL,
-};
-
-#endif
+++ /dev/null
-/*
- * drivers/video/backlight/ubicom32lcdpowerpower.c
- * LCD power driver for the Ubicom32 platform
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/lcd.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <asm/ubicom32lcdpower.h>
-#include <asm/ip5000.h>
-
-#define DRIVER_NAME "ubicom32lcdpower"
-
-struct ubicom32lcdpower_data {
- /*
- * Pointer to the platform data structure. Keep this around since we need values
- * from it to set the backlight intensity.
- */
- const struct ubicom32lcdpower_platform_data *pdata;
-
- /*
- * LCD device, we have to save this for use when we remove ourselves.
- */
- struct lcd_device *lcddev;
-};
-
-/*
- * ubicom32lcdpower_set_power
- */
-static int ubicom32lcdpower_set_power(struct lcd_device *ld, int power)
-{
- struct ubicom32lcdpower_data *ud = (struct ubicom32lcdpower_data *)lcd_get_data(ld);
- if (power == FB_BLANK_UNBLANK) {
- gpio_direction_output(ud->pdata->vgh_gpio, ud->pdata->vgh_polarity);
- return 0;
- }
-
- gpio_direction_output(ud->pdata->vgh_gpio, !ud->pdata->vgh_polarity);
- return 0;
-}
-
-/*
- * ubicom32lcdpower_get_power
- */
-static int ubicom32lcdpower_get_power(struct lcd_device *ld)
-{
- struct ubicom32lcdpower_data *ud = (struct ubicom32lcdpower_data *)lcd_get_data(ld);
- int vgh = gpio_get_value(ud->pdata->vgh_gpio);
- if ((vgh && ud->pdata->vgh_polarity) || (!vgh && !ud->pdata->vgh_polarity)) {
- return 1;
- }
-
- return 0;
-}
-
-static struct lcd_ops ubicom32lcdpower_ops = {
- .get_power = ubicom32lcdpower_get_power,
- .set_power = ubicom32lcdpower_set_power,
-};
-
-/*
- * ubicom32lcdpower_probe
- */
-static int ubicom32lcdpower_probe(struct platform_device *pdev)
-{
- const struct ubicom32lcdpower_platform_data *pdata = pdev->dev.platform_data;
- struct ubicom32lcdpower_data *ud;
- struct lcd_device *lcddev;
- int retval;
-
- /*
- * Check to see if we have any platform data, if we don't have a LCD to control
- */
- if (!pdata) {
- return -ENODEV;
- }
-
- /*
- * Allocate our private data
- */
- ud = kzalloc(sizeof(struct ubicom32lcdpower_data), GFP_KERNEL);
- if (!ud) {
- return -ENOMEM;
- }
-
- ud->pdata = pdata;
-
- /*
- * Request our GPIOs
- */
- retval = gpio_request(pdata->vgh_gpio, "vgh");
- if (retval) {
- dev_err(&pdev->dev, "Failed to allocate vgh GPIO\n");
- goto fail_gpio;
- }
-
- /*
- * Register our lcd device
- */
- lcddev = lcd_device_register(DRIVER_NAME, &pdev->dev, ud, &ubicom32lcdpower_ops);
- if (IS_ERR(lcddev)) {
- retval = PTR_ERR(lcddev);
- goto fail;
- }
-
- ud->lcddev = lcddev;
- platform_set_drvdata(pdev, ud);
-
- ubicom32lcdpower_set_power(lcddev, FB_BLANK_UNBLANK);
-
- printk(KERN_INFO DRIVER_NAME ": LCD driver started\n");
-
- return 0;
-
-fail:
- gpio_free(pdata->vgh_gpio);
-
-fail_gpio:
- platform_set_drvdata(pdev, NULL);
- kfree(ud);
- return retval;
-}
-
-/*
- * ubicom32lcdpower_remove
- */
-static int __exit ubicom32lcdpower_remove(struct platform_device *pdev)
-{
- struct ubicom32lcdpower_data *ud = platform_get_drvdata(pdev);
-
- lcd_device_unregister(ud->lcddev);
- platform_set_drvdata(pdev, NULL);
- kfree(ud);
-
- return 0;
-}
-
-static struct platform_driver ubicom32lcdpower_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-
- .remove = __exit_p(ubicom32lcdpower_remove),
-};
-
-/*
- * ubicom32lcdpower_init
- */
-static int __init ubicom32lcdpower_init(void)
-{
- return platform_driver_probe(&ubicom32lcdpower_driver, ubicom32lcdpower_probe);
-}
-module_init(ubicom32lcdpower_init);
-
-/*
- * ubicom32lcdpower_exit
- */
-static void __exit ubicom32lcdpower_exit(void)
-{
- platform_driver_unregister(&ubicom32lcdpower_driver);
-}
-module_exit(ubicom32lcdpower_exit);
-
-MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
-MODULE_DESCRIPTION("Ubicom32 lcd power driver");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * drivers/video/ubicom32fb.c
- * Ubicom32 frame buffer driver
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-/*
- * This driver was based on skeletonfb.c, Skeleton for a frame buffer device by
- * Geert Uytterhoeven.
- */
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/uaccess.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/ip5000.h>
-#include <asm/vdc_tio.h>
-#include <asm/ubicom32fb.h>
-
-#define DRIVER_NAME "ubicom32fb"
-#define DRIVER_DESCRIPTION "Ubicom32 frame buffer driver"
-
-#define PALETTE_ENTRIES_NO 16
-
-/*
- * Option variables
- *
- * vram_size: VRAM size in kilobytes, subject to alignment
- */
-static int vram_size = 0;
-module_param(vram_size, int, 0);
-MODULE_PARM_DESC(vram, "VRAM size, in kilobytes to allocate, should be at least the size of one screen, subject to alignment");
-static int init_value = 0;
-module_param(init_value, int, 0);
-MODULE_PARM_DESC(init, "Initial value of the framebuffer (16-bit number).");
-
-/*
- * fb_fix_screeninfo defines the non-changeable properties of the VDC, depending on what mode it is in.
- */
-static struct fb_fix_screeninfo ubicom32fb_fix = {
- .id = "Ubicom32",
- .type = FB_TYPE_PACKED_PIXELS,
- .visual = FB_VISUAL_TRUECOLOR,
- .accel = FB_ACCEL_UBICOM32,
-};
-
-/*
- * Filled in at probe time when we find out what the hardware supports
- */
-static struct fb_var_screeninfo ubicom32fb_var;
-
-/*
- * Private data structure
- */
-struct ubicom32fb_drvdata {
- struct fb_info *fbinfo;
- bool cmap_alloc;
-
- /*
- * The address of the framebuffer in memory
- */
- void *fb;
- void *fb_aligned;
-
- /*
- * Total size of vram including alignment allowance
- */
- u32 total_vram_size;
-
- /*
- * Interrupt to set when changing registers
- */
- u32 vp_int;
-
- /*
- * Optional: Interrupt used by TIO to signal us
- */
- u32 rx_int;
-
- /*
- * Base address of the regs for VDC_TIO
- */
- volatile struct vdc_tio_vp_regs *regs;
-
- /*
- * non-zero if we are in yuv mode
- */
- u8_t is_yuv;
-
- /*
- * Fake palette of 16 colors
- */
- u32 pseudo_palette[PALETTE_ENTRIES_NO];
-
- /*
- * Wait queue and lock used to block when we need to wait
- * for something to happen.
- */
- wait_queue_head_t waitq;
- struct mutex lock;
-
-};
-
-/*
- * ubicom32fb_set_next_frame
- * Sets the next frame buffer to display
- *
- * if sync is TRUE then this function will block until the hardware
- * acknowledges the change
- */
-static inline void ubicom32fb_set_next_frame(struct ubicom32fb_drvdata *ud, void *fb, u8_t sync)
-{
- ud->regs->next_frame_flags = ud->is_yuv ? VDCTIO_NEXT_FRAME_FLAG_YUV : 0;
- ud->regs->next_frame = (void *)((u32_t)fb | 1);
-
- /*
- * If we have interrupts, then we can wait on it
- */
- if (ud->rx_int != -1) {
- DEFINE_WAIT(wait);
- unsigned long flags;
-
- spin_lock_irqsave(&ud->lock, flags);
- prepare_to_wait(&ud->waitq, &wait, TASK_INTERRUPTIBLE);
- spin_unlock_irqrestore(&ud->lock, flags);
- schedule();
- finish_wait(&ud->waitq, &wait);
- return;
- }
-
- /*
- * No interrupt, we will just spin here
- */
- while (sync && ((u32_t)ud->regs->next_frame & 1));
-}
-
-/*
- * ubicom32fb_send_command
- * Sends a command/data pair to the VDC
- */
-static inline void ubicom32fb_send_command(struct ubicom32fb_drvdata *ud, u16 command, u8_t block)
-{
- ud->regs->command = command;
- ubicom32_set_interrupt(ud->vp_int);
- while (block && ud->regs->command);
-}
-
-/*
- * ubicom32fb_ioctl
- * Handles any ioctls sent to us
- */
-static int ubicom32fb_ioctl(struct fb_info *fbi, unsigned int cmd,
- unsigned long arg)
-{
- struct ubicom32fb_drvdata *ud = (struct ubicom32fb_drvdata *)fbi->par;
- void __user *argp = (void __user *)arg;
- int retval = -EFAULT;
-
- switch (cmd) {
- case UBICOM32FB_IOCTL_SET_NEXT_FRAME_SYNC:
- // check alignment, return -EINVAL if necessary
- ubicom32fb_set_next_frame(ud, argp, 1);
- retval = 0;
- break;
-
- case UBICOM32FB_IOCTL_SET_NEXT_FRAME:
- // check alignment, return -EINVAL if necessary
- ubicom32fb_set_next_frame(ud, argp, 0);
- retval = 0;
- break;
-
- case UBICOM32FB_IOCTL_SET_MODE:
- if (!(ud->regs->caps & VDCTIO_CAPS_SUPPORTS_SCALING)) {
- break;
- } else {
- struct ubicom32fb_mode mode;
- volatile struct vdc_tio_vp_regs *regs = ud->regs;
- u32_t flags = 0;
-
- if (copy_from_user(&mode, argp, sizeof(mode))) {
- break;
- }
-
- regs->x_in = mode.width;
- regs->y_in = mode.height;
- regs->x_out = regs->xres;
- regs->y_out = regs->yres;
- if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV_SCAN_ORDER) {
- flags |= VDCTIO_SCALE_FLAG_YUV_SCAN_ORDER;
- }
- if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV_BLOCK_ORDER) {
- flags |= VDCTIO_SCALE_FLAG_YUV_BLOCK_ORDER;
- }
- ud->is_yuv = mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV;
- if (ud->is_yuv) {
- flags |= VDCTIO_SCALE_FLAG_YUV;
- }
- if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_VRANGE_16_255) {
- flags |= VDCTIO_SCALE_FLAG_VRANGE_16_255;
- }
- if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_VRANGE_0_255) {
- flags |= VDCTIO_SCALE_FLAG_VRANGE_0_255;
- }
- if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_VSUB) {
- flags |= VDCTIO_SCALE_FLAG_VSUB;
- }
- if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_HSUB_2_1) {
- flags |= VDCTIO_SCALE_FLAG_HSUB_2_1;
- }
- if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_HSUB_1_1) {
- flags |= VDCTIO_SCALE_FLAG_HSUB_1_1;
- }
- if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_SCALE_ENABLE) {
- flags |= VDCTIO_SCALE_FLAG_ENABLE;
- }
- if (mode.next_frame) {
- flags |= VDCTIO_SCALE_FLAG_SET_FRAME_BUFFER;
- regs->next_frame = mode.next_frame;
- }
-
- regs->scale_flags = flags;
- ubicom32fb_send_command(ud, VDCTIO_COMMAND_SET_SCALE_MODE, 1);
- retval = 0;
- break;
- }
-
- default:
- retval = -ENOIOCTLCMD;
- break;
- }
-
- return retval;
-}
-
-/*
- * ubicom32fb_interrupt
- * Called by the OS when the TIO has set the rx_int
- */
-static irqreturn_t ubicom32fb_interrupt(int vec, void *appdata)
-{
- struct ubicom32fb_drvdata *ud = (struct ubicom32fb_drvdata *)appdata;
-
- spin_lock(&ud->lock);
- if (waitqueue_active(&ud->waitq)) {
- wake_up(&ud->waitq);
- }
- spin_unlock(&ud->lock);
-
- return IRQ_HANDLED;
-}
-
-/*
- * ubicom32fb_pan_display
- * Pans the display to a given location. Supports only y direction panning.
- */
-static int ubicom32fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
-{
- struct ubicom32fb_drvdata *ud = (struct ubicom32fb_drvdata *)fbi->par;
- void *new_addr;
-
- /*
- * Get the last y line that would be displayed. Since we don't support YWRAP,
- * it must be less than our virtual y size.
- */
- u32 lasty = var->yoffset + var->yres;
- if (lasty > fbi->var.yres_virtual) {
- /*
- * We would fall off the end of our frame buffer if we panned here.
- */
- return -EINVAL;
- }
-
- if (var->xoffset) {
- /*
- * We don't support panning in the x direction
- */
- return -EINVAL;
- }
-
- /*
- * Everything looks sane, go ahead and pan
- *
- * We have to calculate a new address for the VDC to look at
- */
- new_addr = ud->fb_aligned + (var->yoffset * fbi->fix.line_length);
-
- /*
- * Send down the command. The buffer will switch at the next vertical blank
- */
- ubicom32fb_set_next_frame(ud, (void *)new_addr, 0);
-
- return 0;
-}
-
-/*
- * ubicom32fb_setcolreg
- * Sets a color in our virtual palette
- */
-static int ubicom32fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
-{
- u32 *palette = fbi->pseudo_palette;
-
- if (regno >= PALETTE_ENTRIES_NO) {
- return -EINVAL;
- }
-
- /*
- * We only use 8 bits from each color
- */
- red >>= 8;
- green >>= 8;
- blue >>= 8;
-
- /*
- * Convert any grayscale values
- */
- if (fbi->var.grayscale) {
- u16 gray = red + green + blue;
- gray += (gray >> 2) + (gray >> 3) - (gray >> 7);
- gray >>= 2;
- if (gray > 255) {
- gray = 255;
- }
- red = gray;
- blue = gray;
- green = gray;
- }
-
- palette[regno] = (red << fbi->var.red.offset) | (green << fbi->var.green.offset) |
- (blue << fbi->var.blue.offset);
-
- return 0;
-}
-
-/*
- * ubicom32fb_mmap
- */
-static int ubicom32fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-{
- struct ubicom32fb_drvdata *drvdata = (struct ubicom32fb_drvdata *)info->par;
-
- vma->vm_start = (unsigned long)(drvdata->fb_aligned);
-
- vma->vm_end = vma->vm_start + info->fix.smem_len;
-
- /* For those who don't understand how mmap works, go read
- * Documentation/nommu-mmap.txt.
- * For those that do, you will know that the VM_MAYSHARE flag
- * must be set in the vma->vm_flags structure on noMMU
- * Other flags can be set, and are documented in
- * include/linux/mm.h
- */
-
- vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
-
- return 0;
-}
-
-/*
- * ubicom32fb_blank
- */
-static int ubicom32fb_blank(int blank_mode, struct fb_info *fbi)
-{
- return 0;
-#if 0
- struct ubicom32fb_drvdata *drvdata = to_ubicom32fb_drvdata(fbi);
-
- switch (blank_mode) {
- case FB_BLANK_UNBLANK:
- /* turn on panel */
- ubicom32fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
- break;
-
- case FB_BLANK_NORMAL:
- case FB_BLANK_VSYNC_SUSPEND:
- case FB_BLANK_HSYNC_SUSPEND:
- case FB_BLANK_POWERDOWN:
- /* turn off panel */
- ubicom32fb_out_be32(drvdata, REG_CTRL, 0);
- default:
- break;
-
- }
- return 0; /* success */
-#endif
-}
-
-static struct fb_ops ubicom32fb_ops =
-{
- .owner = THIS_MODULE,
- .fb_pan_display = ubicom32fb_pan_display,
- .fb_setcolreg = ubicom32fb_setcolreg,
- .fb_blank = ubicom32fb_blank,
- .fb_mmap = ubicom32fb_mmap,
- .fb_ioctl = ubicom32fb_ioctl,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
-};
-
-/*
- * ubicom32fb_release
- */
-static int ubicom32fb_release(struct device *dev)
-{
- struct ubicom32fb_drvdata *ud = dev_get_drvdata(dev);
-
-#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
- //ubicom32fb_blank(VESA_POWERDOWN, &drvdata->info);
-#endif
-
- unregister_framebuffer(ud->fbinfo);
-
- if (ud->cmap_alloc) {
- fb_dealloc_cmap(&ud->fbinfo->cmap);
- }
-
- if (ud->fb) {
- kfree(ud->fb);
- }
-
- if (ud->rx_int != -1) {
- free_irq(ud->rx_int, ud);
- }
-
- /*
- * Turn off the display
- */
- //ubicom32fb_out_be32(drvdata, REG_CTRL, 0);
- //iounmap(drvdata->regs);
-
- framebuffer_release(ud->fbinfo);
- dev_set_drvdata(dev, NULL);
-
- return 0;
-}
-
-/*
- * ubicom32fb_platform_probe
- */
-static int __init ubicom32fb_platform_probe(struct platform_device *pdev)
-{
- struct ubicom32fb_drvdata *ud;
- struct resource *irq_resource_rx;
- struct resource *irq_resource_tx;
- struct resource *mem_resource;
- struct fb_info *fbinfo;
- int rc;
- size_t fbsize;
- struct device *dev = &pdev->dev;
- int offset;
- struct vdc_tio_vp_regs *regs;
-
- /*
- * Get our resources
- */
- irq_resource_tx = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!irq_resource_tx) {
- dev_err(dev, "No tx IRQ resource assigned\n");
- return -ENODEV;
- }
-
- irq_resource_rx = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
- if (!irq_resource_rx) {
- dev_err(dev, "No rx IRQ resource assigned\n");
- return -ENODEV;
- }
-
- mem_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem_resource || !mem_resource->start) {
- dev_err(dev, "No mem resource assigned\n");
- return -ENODEV;
- }
- regs = (struct vdc_tio_vp_regs *)mem_resource->start;
- if (regs->version != VDCTIO_VP_VERSION) {
- dev_err(dev, "VDCTIO is not compatible with this driver tio:%x drv:%x\n",
- regs->version, VDCTIO_VP_VERSION);
- return -ENODEV;
- }
-
- /*
- * This is the minimum VRAM size
- */
- fbsize = regs->xres * regs->yres * (regs->bpp / 8);
- if (!vram_size) {
- vram_size = (fbsize + 1023) / 1024;
- } else {
- if (fbsize > (vram_size * 1024)) {
- dev_err(dev, "Not enough VRAM for display, need >= %u bytes\n", fbsize);
- return -ENOMEM; // should be ebadparam?
- }
- }
-
- /*
- * Allocate the framebuffer instance + our private data
- */
- fbinfo = framebuffer_alloc(sizeof(struct ubicom32fb_drvdata), &pdev->dev);
- if (!fbinfo) {
- dev_err(dev, "Not enough memory to allocate instance.\n");
- return -ENOMEM;
- }
-
- /*
- * Fill in our private data.
- */
- ud = (struct ubicom32fb_drvdata *)fbinfo->par;
- ud->fbinfo = fbinfo;
- ud->regs = (struct vdc_tio_vp_regs *)(mem_resource->start);
- dev_set_drvdata(dev, ud);
-
- ud->vp_int = irq_resource_tx->start;
-
- /*
- * If we were provided an rx_irq then we need to init the appropriate
- * queues, locks, and functions.
- */
- ud->rx_int = -1;
- if (irq_resource_rx->start != DEVTREE_IRQ_NONE) {
- init_waitqueue_head(&ud->waitq);
- mutex_init(&ud->lock);
- if (request_irq(ud->rx_int, ubicom32fb_interrupt, IRQF_SHARED, "ubicom32fb_rx", ud)) {
- dev_err(dev, "Couldn't request rx IRQ\n");
- rc = -ENOMEM;
- goto fail;
- }
- ud->rx_int = irq_resource_rx->start;
- }
-
- /*
- * Allocate and align the requested amount of VRAM
- */
- ud->total_vram_size = (vram_size * 1024) + regs->fb_align;
- ud->fb = kmalloc(ud->total_vram_size, GFP_KERNEL);
- if (ud->fb == NULL) {
- dev_err(dev, "Couldn't allocate VRAM\n");
- rc = -ENOMEM;
- goto fail;
- }
-
- offset = (u32_t)ud->fb & (regs->fb_align - 1);
- if (!offset) {
- ud->fb_aligned = ud->fb;
- } else {
- offset = regs->fb_align - offset;
- ud->fb_aligned = ud->fb + offset;
- }
-
- /*
- * Clear the entire frame buffer
- */
- if (!init_value) {
- memset(ud->fb_aligned, 0, vram_size * 1024);
- } else {
- unsigned short *p = ud->fb_aligned;
- int i;
- for (i = 0; i < ((vram_size * 1024) / sizeof(u16_t)); i++) {
- *p++ = init_value;
- }
- }
-
- /*
- * Fill in the fb_var_screeninfo structure
- */
- memset(&ubicom32fb_var, 0, sizeof(ubicom32fb_var));
- ubicom32fb_var.bits_per_pixel = regs->bpp;
- ubicom32fb_var.red.offset = regs->rshift;
- ubicom32fb_var.green.offset = regs->gshift;
- ubicom32fb_var.blue.offset = regs->bshift;
- ubicom32fb_var.red.length = regs->rbits;
- ubicom32fb_var.green.length = regs->gbits;
- ubicom32fb_var.blue.length = regs->bbits;
- ubicom32fb_var.activate = FB_ACTIVATE_NOW;
-
-#if 0
- /*
- * Turn on the display
- */
- ud->reg_ctrl_default = REG_CTRL_ENABLE;
- if (regs->rotate_screen)
- ud->reg_ctrl_default |= REG_CTRL_ROTATE;
- ubicom32fb_out_be32(ud, REG_CTRL, ud->reg_ctrl_default);
-#endif
-
- /*
- * Fill in the fb_info structure
- */
- ud->fbinfo->device = dev;
- ud->fbinfo->screen_base = (void *)ud->fb_aligned;
- ud->fbinfo->fbops = &ubicom32fb_ops;
- ud->fbinfo->fix = ubicom32fb_fix;
- ud->fbinfo->fix.smem_start = (u32)ud->fb_aligned;
- ud->fbinfo->fix.smem_len = vram_size * 1024;
- ud->fbinfo->fix.line_length = regs->xres * (regs->bpp / 8);
- ud->fbinfo->fix.mmio_start = (u32)regs;
- ud->fbinfo->fix.mmio_len = sizeof(struct vdc_tio_vp_regs);
-
- /*
- * We support panning in the y direction only
- */
- ud->fbinfo->fix.xpanstep = 0;
- ud->fbinfo->fix.ypanstep = 1;
-
- ud->fbinfo->pseudo_palette = ud->pseudo_palette;
- ud->fbinfo->flags = FBINFO_DEFAULT;
- ud->fbinfo->var = ubicom32fb_var;
- ud->fbinfo->var.xres = regs->xres;
- ud->fbinfo->var.yres = regs->yres;
-
- /*
- * We cannot pan in the X direction, so xres_virtual is regs->xres
- * We can pan in the Y direction, so yres_virtual is vram_size / ud->fbinfo->fix.line_length
- */
- ud->fbinfo->var.xres_virtual = regs->xres;
- ud->fbinfo->var.yres_virtual = (vram_size * 1024) / ud->fbinfo->fix.line_length;
-
- //ud->fbinfo->var.height = regs->height_mm;
- //ud->fbinfo->var.width = regs->width_mm;
-
- /*
- * Allocate a color map
- */
- rc = fb_alloc_cmap(&ud->fbinfo->cmap, PALETTE_ENTRIES_NO, 0);
- if (rc) {
- dev_err(dev, "Fail to allocate colormap (%d entries)\n",
- PALETTE_ENTRIES_NO);
- goto fail;
- }
- ud->cmap_alloc = true;
-
- /*
- * Register new frame buffer
- */
- rc = register_framebuffer(ud->fbinfo);
- if (rc) {
- dev_err(dev, "Could not register frame buffer\n");
- goto fail;
- }
-
- /*
- * Start up the VDC
- */
- ud->regs->next_frame = ud->fb;
- ubicom32fb_send_command(ud, VDCTIO_COMMAND_START, 0);
-
- /*
- * Tell the log we are here
- */
- dev_info(dev, "fbaddr=%p align=%p, size=%uKB screen(%ux%u) virt(%ux%u), regs=%p irqtx=%u irqrx=%u\n",
- ud->fb, ud->fb_aligned, vram_size, ud->fbinfo->var.xres, ud->fbinfo->var.yres,
- ud->fbinfo->var.xres_virtual, ud->fbinfo->var.yres_virtual, ud->regs,
- irq_resource_tx->start, irq_resource_rx->start);
-
- /*
- * Success
- */
- return 0;
-
-fail:
- ubicom32fb_release(dev);
- return rc;
-}
-
-/*
- * ubicom32fb_platform_remove
- */
-static int ubicom32fb_platform_remove(struct platform_device *pdev)
-{
- dev_info(&(pdev->dev), "Ubicom32 FB Driver Remove\n");
- return ubicom32fb_release(&pdev->dev);
-}
-
-static struct platform_driver ubicom32fb_platform_driver = {
- .probe = ubicom32fb_platform_probe,
- .remove = ubicom32fb_platform_remove,
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-#ifndef MODULE
-/*
- * ubicom32fb_setup
- * Process kernel boot options
- */
-static int __init ubicom32fb_setup(char *options)
-{
- char *this_opt;
-
- if (!options || !*options) {
- return 0;
- }
-
- while ((this_opt = strsep(&options, ",")) != NULL) {
- if (!*this_opt) {
- continue;
- }
-
- if (!strncmp(this_opt, "init_value=", 10)) {
- init_value = simple_strtoul(this_opt + 11, NULL, 0);
- continue;
- }
-
- if (!strncmp(this_opt, "vram_size=", 10)) {
- vram_size = simple_strtoul(this_opt + 10, NULL, 0);
- continue;
- }
- }
- return 0;
-}
-#endif /* MODULE */
-
-/*
- * ubicom32fb_init
- */
-static int __devinit ubicom32fb_init(void)
-{
-#ifndef MODULE
- /*
- * Get kernel boot options (in 'video=ubicom32fb:<options>')
- */
- char *option = NULL;
-
- if (fb_get_options(DRIVER_NAME, &option)) {
- return -ENODEV;
- }
- ubicom32fb_setup(option);
-#endif /* MODULE */
-
- return platform_driver_register(&ubicom32fb_platform_driver);
-}
-module_init(ubicom32fb_init);
-
-/*
- * ubicom32fb_exit
- */
-static void __exit ubicom32fb_exit(void)
-{
- platform_driver_unregister(&ubicom32fb_platform_driver);
-}
-module_exit(ubicom32fb_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
-MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
+++ /dev/null
-/*
- * drivers/video/ubicom32plio80.c
- * Ubicom32 80 bus PLIO buffer driver
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-/*
- * This driver was based on skeletonfb.c, Skeleton for a frame buffer device by
- * Geert Uytterhoeven.
- */
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/uaccess.h>
-#include <asm/plio.h>
-
-#define DRIVER_NAME "ubicom32plio80"
-#define DRIVER_DESCRIPTION "Ubicom32 80 bus PLIO frame buffer driver"
-
-#define PALETTE_ENTRIES_NO 16
-
-/*
- * Option variables
- *
- * vram_size: VRAM size in kilobytes, subject to alignment
- */
-static int vram_size = 0;
-module_param(vram_size, int, 0);
-MODULE_PARM_DESC(vram_size, "VRAM size, in kilobytes to allocate, should be at least the size of one screen, subject to alignment");
-
-static int xres = 240;
-module_param(xres, int, 0);
-MODULE_PARM_DESC(xres, "x (horizontal) resolution");
-
-static int yres = 320;
-module_param(yres, int, 0);
-MODULE_PARM_DESC(yres, "y (vertical) resolution");
-
-static int bgr = 0;
-module_param(bgr, int, 0);
-MODULE_PARM_DESC(bgr, "display is BGR (Blue is MSB)");
-
-#define BITS_PER_PIXEL 16
-
-/*
- * Buffer alignment, must not be 0
- */
-#define UBICOM32PLIO80_ALIGNMENT 4
-
-/*
- * PLIO FSM
- * 16-bit data bus on port I
- * CS on EXTCTL[6]
- * WR on EXTCTL[4]
- */
-static const plio_fctl_t plio_fctl = {
- .fctl0 = {
- .ptif_port_mode = PLIO_PORT_MODE_DI,
- .ptif_portd_cfg = 0,
- .ptif_porti_cfg = 3,
- .edif_ds = 6,
- .edif_cmp_mode = 1,
- .ecif_extclk_ena = 0, // enable clock output on PD7 table 2.65/p111 says extctl[0]?
- .icif_clk_src_sel = PLIO_CLK_IO,
- },
- .fctl2 = {
- .icif_eclk_div = 10,
- .icif_iclk_div = 10,
- },
-
- };
-
- static const plio_config_t plio_config = {
- .pfsm = {
- /*
- * Table 12.63
- */
- .grpsel[0] = {1,1,1,1,1,1,1,1,1,1},
-
- /*
- * Table 12.66 Counter load value
- */
- .cs_lut[0] = {0,0,0,0,0,0,0,0},
-
- /*
- * Table 2.75 PLIO PFSM Configuration Registers
- */
- // 3 2 1 0
- .extctl_o_lut[0] = {0x3f, 0x2f, 0x3f, 0x3f},
- // 7 6 5 4
- .extctl_o_lut[1] = {0x3f, 0x3f, 0x3f, 0x2f},
- },
- .edif = {
- .odr_oe = 0xffff,
- },
- .ecif = {
- .output_ena = (1 << 6) | (1 << 4),
- },
-};
-
-static const u32_t ubicom32plio80_plio_fsm[] = {
- // 0-F
- 0x00070007, 0x00070007,
- 0x00070007, 0x00070007,
- 0x00070007, 0x00070007,
- 0x00070007, 0x00070007,
-
- 0x16260806, 0x16260806,
- 0x16260806, 0x16260806,
- 0x16260806, 0x16260806,
- 0x16260806, 0x16260806,
-
- // 10 - 1f
- 0x22061806, 0x22061806,
- 0x22061806, 0x22061806,
- 0x22061806, 0x22061806,
- 0x22061806, 0x22061806,
-
- 0x22061806, 0x22061806,
- 0x22061806, 0x22061806,
- 0x22061806, 0x22061806,
- 0x22061806, 0x22061806,
-
- // 20 - 2f
- 0x00070806, 0x00070806,
- 0x00070806, 0x00070806,
- 0x00070806, 0x00070806,
- 0x00070806, 0x00070806,
-
- 0x00070806, 0x00070806,
- 0x00070806, 0x00070806,
- 0x00070806, 0x00070806,
- 0x00070806, 0x00070806,
-};
-
-/*
- * fb_fix_screeninfo defines the non-changeable properties of the VDC, depending on what mode it is in.
- */
-static struct fb_fix_screeninfo ubicom32plio80_fix = {
- .id = "Ubicom32",
- .type = FB_TYPE_PACKED_PIXELS,
- .visual = FB_VISUAL_TRUECOLOR,
- .accel = FB_ACCEL_UBICOM32_PLIO80,
-};
-
-/*
- * Filled in at probe time when we find out what the hardware supports
- */
-static struct fb_var_screeninfo ubicom32plio80_var;
-
-/*
- * Private data structure
- */
-struct ubicom32plio80_drvdata {
- struct fb_info *fbinfo;
- bool cmap_alloc;
-
- /*
- * The address of the framebuffer in memory
- */
- void *fb;
- void *fb_aligned;
-
- /*
- * Total size of vram including alignment allowance
- */
- u32 total_vram_size;
-
- /*
- * Fake palette of 16 colors
- */
- u32 pseudo_palette[PALETTE_ENTRIES_NO];
-
- int irq_req;
-
- /*
- * Current pointer and bytes left to transfer with the PLIO
- */
- void *xfer_ptr;
- u32 bytes_to_xfer;
- u32 busy;
-};
-
-static struct platform_device *ubicom32plio80_platform_device;
-
-/*
- * ubicom32plio80_isr
- */
-static int ubicom32plio80_isr(int irq, void *appdata)
-{
- struct ubicom32plio80_drvdata *ud = (struct ubicom32plio80_drvdata *)appdata;
-
- if (!ud->bytes_to_xfer) {
- ubicom32_disable_interrupt(TX_FIFO_INT(PLIO_PORT));
- PLIO_NBR->intmask.txfifo_wm = 0;
- ud->busy = 0;
- return IRQ_HANDLED;
- }
-
- asm volatile (
- ".rept 8 \n\t"
- "move.4 (%[fifo]), (%[data])4++ \n\t"
- ".endr \n\t"
- : [data] "+a" (ud->xfer_ptr)
- : [fifo] "a" (&PLIO_NBR->tx_lo)
- );
-
- ud->bytes_to_xfer -= 32;
-
- return IRQ_HANDLED;
-}
-
-/*
- * ubicom32plio80_update
- */
-static void ubicom32plio80_update(struct ubicom32plio80_drvdata *ud, u32 *fb)
-{
- struct ubicom32_io_port *ri = (struct ubicom32_io_port *)RI;
- struct ubicom32_io_port *rd = (struct ubicom32_io_port *)RD;
-
- ud->xfer_ptr = fb;
- ud->bytes_to_xfer = (xres * yres * 2) - 64;
- ud->busy = 1;
-
- ri->gpio_mask = 0;
- rd->gpio_mask &= ~((1 << 4) | (1 << 2));
-
- *(u32 *)(&PLIO_NBR->intclr) = ~0;
- PLIO_NBR->intmask.txfifo_wm = 1;
- PLIO_NBR->fifo_wm.tx = 8;
- ubicom32_enable_interrupt(TX_FIFO_INT(PLIO_PORT));
-
- asm volatile (
- ".rept 16 \n\t"
- "move.4 (%[fifo]), (%[data])4++ \n\t"
- ".endr \n\t"
- : [data] "+a" (ud->xfer_ptr)
- : [fifo] "a" (&PLIO_NBR->tx_lo)
- );
-}
-
-/*
- * ubicom32plio80_pan_display
- * Pans the display to a given location. Supports only y direction panning.
- */
-static int ubicom32plio80_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
-{
- struct ubicom32plio80_drvdata *ud = (struct ubicom32plio80_drvdata *)fbi->par;
- void *new_addr;
-
- /*
- * Get the last y line that would be displayed. Since we don't support YWRAP,
- * it must be less than our virtual y size.
- */
- u32 lasty = var->yoffset + var->yres;
- if (lasty > fbi->var.yres_virtual) {
- /*
- * We would fall off the end of our frame buffer if we panned here.
- */
- return -EINVAL;
- }
-
- if (var->xoffset) {
- /*
- * We don't support panning in the x direction
- */
- return -EINVAL;
- }
-
- /*
- * Everything looks sane, go ahead and pan
- *
- * We have to calculate a new address for the VDC to look at
- */
- new_addr = ud->fb_aligned + (var->yoffset * fbi->fix.line_length);
-
- return 0;
-}
-
-/*
- * ubicom32plio80_setcolreg
- * Sets a color in our virtual palette
- */
-static int ubicom32plio80_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
-{
- u32 *palette = fbi->pseudo_palette;
-
- if (regno >= PALETTE_ENTRIES_NO) {
- return -EINVAL;
- }
-
- /*
- * We only use 8 bits from each color
- */
- red >>= 8;
- green >>= 8;
- blue >>= 8;
-
- /*
- * Convert any grayscale values
- */
- if (fbi->var.grayscale) {
- u16 gray = red + green + blue;
- gray += (gray >> 2) + (gray >> 3) - (gray >> 7);
- gray >>= 2;
- if (gray > 255) {
- gray = 255;
- }
- red = gray;
- blue = gray;
- green = gray;
- }
-
- palette[regno] = (red << fbi->var.red.offset) | (green << fbi->var.green.offset) |
- (blue << fbi->var.blue.offset);
-
- return 0;
-}
-
-/*
- * ubicom32plio80_mmap
- */
-static int ubicom32plio80_mmap(struct fb_info *info, struct vm_area_struct *vma)
-{
- struct ubicom32plio80_drvdata *ud = (struct ubicom32plio80_drvdata *)info->par;
-
- vma->vm_start = (unsigned long)(ud->fb_aligned);
-
- vma->vm_end = vma->vm_start + info->fix.smem_len;
-
- /* For those who don't understand how mmap works, go read
- * Documentation/nommu-mmap.txt.
- * For those that do, you will know that the VM_MAYSHARE flag
- * must be set in the vma->vm_flags structure on noMMU
- * Other flags can be set, and are documented in
- * include/linux/mm.h
- */
-
- vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
-
- return 0;
-}
-
-/*
- * ubicom32plio80_check_var
- * Check the var, tweak it but don't change operational parameters.
- */
-static int ubicom32plio80_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
-{
- struct ubicom32plio80_drvdata *ud = (struct ubicom32plio80_drvdata *)info->par;
- u32 line_size = var->xres * (BITS_PER_PIXEL / 8);
-
- /*
- * See if we can handle this bpp
- */
- if (var->bits_per_pixel > BITS_PER_PIXEL) {
- return -EINVAL;
- }
- var->bits_per_pixel = BITS_PER_PIXEL;
-
- /*
- * See if we have enough memory to handle this resolution
- */
- if ((line_size * var->yres * BITS_PER_PIXEL / 8) > ud->total_vram_size) {
- return -EINVAL;
- }
-
- var->xres_virtual = var->xres;
- var->yres_virtual = ud->total_vram_size / line_size;
-
- var->red.length = 5;
- var->green.length = 6;
- var->green.offset = 5;
- var->blue.length = 5;
- var->transp.offset = var->transp.length = 0;
-
- if (bgr) {
- var->red.offset = 0;
- var->blue.offset = 11;
- } else {
- var->red.offset = 11;
- var->blue.offset = 0;
- }
-
- var->nonstd = 0;
- var->height = -1;
- var->width = -1;
- var->vmode = FB_VMODE_NONINTERLACED;
- var->sync = 0;
-
- return 0;
-}
-
-/*
- * ubicom32plio80_set_par
- * Set the video mode according to info->var
- */
-static int ubicom32plio80_set_par(struct fb_info *info)
-{
- /*
- * Anything changed?
- */
- if ((xres == info->var.xres) && (yres == info->var.yres)) {
- return 0;
- }
-
- /*
- * Implement changes
- */
- xres = info->var.xres;
- yres = info->var.yres;
- info->fix.visual = FB_VISUAL_TRUECOLOR;
- info->fix.xpanstep = 0;
- info->fix.ypanstep = 1;
- info->fix.line_length = xres * (BITS_PER_PIXEL / 8);
-
- return 0;
-}
-
-/*
- * ubicom32plio80_ops
- * List of supported operations
- */
-static struct fb_ops ubicom32plio80_ops =
-{
- .owner = THIS_MODULE,
- .fb_pan_display = ubicom32plio80_pan_display,
- .fb_setcolreg = ubicom32plio80_setcolreg,
- .fb_mmap = ubicom32plio80_mmap,
- .fb_check_var = ubicom32plio80_check_var,
- .fb_set_par = ubicom32plio80_set_par,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
-};
-
-/*
- * ubicom32plio80_release
- */
-static int ubicom32plio80_release(struct device *dev)
-{
- struct ubicom32plio80_drvdata *ud = dev_get_drvdata(dev);
-
- unregister_framebuffer(ud->fbinfo);
-
- if (ud->irq_req) {
- free_irq(TX_FIFO_INT(PLIO_PORT), ud);
- }
- if (ud->cmap_alloc) {
- fb_dealloc_cmap(&ud->fbinfo->cmap);
- }
-
- if (ud->fb) {
- kfree(ud->fb);
- }
-
- framebuffer_release(ud->fbinfo);
- dev_set_drvdata(dev, NULL);
-
- return 0;
-}
-
-/*
- * ubicom32plio80_platform_probe
- */
-static int __init ubicom32plio80_platform_probe(struct platform_device *pdev)
-{
- struct ubicom32plio80_drvdata *ud;
- struct fb_info *fbinfo;
- int rc;
- size_t fbsize;
- struct device *dev = &pdev->dev;
- int offset;
-
- /*
- * This is the minimum VRAM size
- */
- fbsize = xres * yres * 2;
- if (!vram_size) {
- vram_size = (fbsize + 1023) / 1024;
- } else {
- if (fbsize > (vram_size * 1024)) {
- dev_err(dev, "Not enough VRAM for display, need >= %u bytes\n", fbsize);
- return -ENOMEM; // should be ebadparam?
- }
- }
-
- /*
- * Allocate the framebuffer instance + our private data
- */
- fbinfo = framebuffer_alloc(sizeof(struct ubicom32plio80_drvdata), &pdev->dev);
- if (!fbinfo) {
- dev_err(dev, "Not enough memory to allocate instance.\n");
- return -ENOMEM;
- }
-
- /*
- * Fill in our private data.
- */
- ud = (struct ubicom32plio80_drvdata *)fbinfo->par;
- ud->fbinfo = fbinfo;
- dev_set_drvdata(dev, ud);
-
- /*
- * Allocate and align the requested amount of VRAM
- */
- ud->total_vram_size = (vram_size * 1024) + UBICOM32PLIO80_ALIGNMENT;
- ud->fb = kmalloc(ud->total_vram_size, GFP_KERNEL);
- if (ud->fb == NULL) {
- dev_err(dev, "Couldn't allocate VRAM\n");
- rc = -ENOMEM;
- goto fail;
- }
-
- offset = (u32_t)ud->fb & (UBICOM32PLIO80_ALIGNMENT - 1);
- if (!offset) {
- ud->fb_aligned = ud->fb;
- } else {
- offset = UBICOM32PLIO80_ALIGNMENT - offset;
- ud->fb_aligned = ud->fb + offset;
- }
-
- /*
- * Clear the entire frame buffer
- */
- memset(ud->fb_aligned, 0, vram_size * 1024);
-
- /*
- * Fill in the fb_var_screeninfo structure
- */
- memset(&ubicom32plio80_var, 0, sizeof(ubicom32plio80_var));
- ubicom32plio80_var.bits_per_pixel = BITS_PER_PIXEL;
- ubicom32plio80_var.red.length = 5;
- ubicom32plio80_var.green.length = 6;
- ubicom32plio80_var.green.offset = 5;
- ubicom32plio80_var.blue.length = 5;
- ubicom32plio80_var.activate = FB_ACTIVATE_NOW;
-
- if (bgr) {
- ubicom32plio80_var.red.offset = 0;
- ubicom32plio80_var.blue.offset = 11;
- } else {
- ubicom32plio80_var.red.offset = 11;
- ubicom32plio80_var.blue.offset = 0;
- }
-
- /*
- * Fill in the fb_info structure
- */
- ud->fbinfo->device = dev;
- ud->fbinfo->screen_base = (void *)ud->fb_aligned;
- ud->fbinfo->fbops = &ubicom32plio80_ops;
- ud->fbinfo->fix = ubicom32plio80_fix;
- ud->fbinfo->fix.smem_start = (u32)ud->fb_aligned;
- ud->fbinfo->fix.smem_len = vram_size * 1024;
- ud->fbinfo->fix.line_length = xres * 2;
- ud->fbinfo->fix.mmio_start = (u32)ud;
- ud->fbinfo->fix.mmio_len = sizeof(struct ubicom32plio80_drvdata);
-
- /*
- * We support panning in the y direction only
- */
- ud->fbinfo->fix.xpanstep = 0;
- ud->fbinfo->fix.ypanstep = 1;
-
- ud->fbinfo->pseudo_palette = ud->pseudo_palette;
- ud->fbinfo->flags = FBINFO_DEFAULT;
- ud->fbinfo->var = ubicom32plio80_var;
- ud->fbinfo->var.xres = xres;
- ud->fbinfo->var.yres = yres;
-
- /*
- * We cannot pan in the X direction, so xres_virtual is xres
- * We can pan in the Y direction, so yres_virtual is vram_size / ud->fbinfo->fix.line_length
- */
- ud->fbinfo->var.xres_virtual = xres;
- ud->fbinfo->var.yres_virtual = (vram_size * 1024) / ud->fbinfo->fix.line_length;
-
- /*
- * Allocate a color map
- */
- rc = fb_alloc_cmap(&ud->fbinfo->cmap, PALETTE_ENTRIES_NO, 0);
- if (rc) {
- dev_err(dev, "Fail to allocate colormap (%d entries)\n",
- PALETTE_ENTRIES_NO);
- goto fail;
- }
- ud->cmap_alloc = true;
-
- /*
- * Register new frame buffer
- */
- rc = register_framebuffer(ud->fbinfo);
- if (rc) {
- dev_err(dev, "Could not register frame buffer\n");
- goto fail;
- }
-
- /*
- * request the PLIO IRQ
- */
- rc = request_irq(TX_FIFO_INT(PLIO_PORT), ubicom32plio80_isr, IRQF_DISABLED, "ubicom32plio80", ud);
- if (rc) {
- dev_err(dev, "Could not request IRQ\n");
- goto fail;
- }
- ud->irq_req = 1;
-
- /*
- * Clear any garbage out of the TX FIFOs (idif_txfifo_flush)
- *
- * cast through ubicom32_io_port to make sure the compiler does a word write
- */
- ((struct ubicom32_io_port *)PLIO_NBR)->int_set = (1 << 18);
-
- /*
- * Start up the state machine
- */
- plio_init(&plio_fctl, &plio_config, (plio_sram_t *)ubicom32plio80_plio_fsm, sizeof(ubicom32plio80_plio_fsm));
- PLIO_NBR->fctl0.pfsm_cmd = 0;
-
- ubicom32plio80_update(ud, ud->fb_aligned);
-
- /*
- * Tell the log we are here
- */
- dev_info(dev, "fbaddr=%p align=%p, size=%uKB screen(%ux%u) virt(%ux%u)\n",
- ud->fb, ud->fb_aligned, vram_size, ud->fbinfo->var.xres, ud->fbinfo->var.yres,
- ud->fbinfo->var.xres_virtual, ud->fbinfo->var.yres_virtual);
-
- /*
- * Success
- */
- return 0;
-
-fail:
- ubicom32plio80_release(dev);
- return rc;
-}
-
-/*
- * ubicom32plio80_platform_remove
- */
-static int ubicom32plio80_platform_remove(struct platform_device *pdev)
-{
- dev_info(&(pdev->dev), "Ubicom32 FB Driver Remove\n");
- return ubicom32plio80_release(&pdev->dev);
-}
-
-static struct platform_driver ubicom32plio80_platform_driver = {
- .probe = ubicom32plio80_platform_probe,
- .remove = ubicom32plio80_platform_remove,
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-#ifndef MODULE
-/*
- * ubicom32plio80_setup
- * Process kernel boot options
- */
-static int __init ubicom32plio80_setup(char *options)
-{
- char *this_opt;
-
- if (!options || !*options) {
- return 0;
- }
-
- while ((this_opt = strsep(&options, ",")) != NULL) {
- if (!*this_opt) {
- continue;
- }
-
- if (!strncmp(this_opt, "vram_size=", 10)) {
- vram_size = simple_strtoul(this_opt + 10, NULL, 0);
- continue;
- }
-
- if (!strncmp(this_opt, "bgr=", 4)) {
- bgr = simple_strtoul(this_opt + 4, NULL, 0);
- continue;
- }
-
- if (!strncmp(this_opt, "xres=", 5)) {
- xres = simple_strtoul(this_opt + 5, NULL, 0);
- continue;
- }
-
- if (!strncmp(this_opt, "yres=", 5)) {
- yres = simple_strtoul(this_opt + 5, NULL, 0);
- continue;
- }
- }
- return 0;
-}
-#endif /* MODULE */
-
-/*
- * ubicom32plio80_init
- */
-static int __devinit ubicom32plio80_init(void)
-{
- int ret;
-
-#ifndef MODULE
- /*
- * Get kernel boot options (in 'video=ubicom32plio80:<options>')
- */
- char *option = NULL;
-
- if (fb_get_options(DRIVER_NAME, &option)) {
- return -ENODEV;
- }
- ubicom32plio80_setup(option);
-#endif /* MODULE */
-
- ret = platform_driver_register(&ubicom32plio80_platform_driver);
-
- if (!ret) {
- ubicom32plio80_platform_device = platform_device_alloc(DRIVER_NAME, 0);
-
- if (ubicom32plio80_platform_device)
- ret = platform_device_add(ubicom32plio80_platform_device);
- else
- ret = -ENOMEM;
-
- if (ret) {
- platform_device_put(ubicom32plio80_platform_device);
- platform_driver_unregister(&ubicom32plio80_platform_driver);
- }
- }
-
- return ret;
-}
-module_init(ubicom32plio80_init);
-
-/*
- * ubicom32plio80_exit
- */
-static void __exit ubicom32plio80_exit(void)
-{
- platform_device_unregister(ubicom32plio80_platform_device);
- platform_driver_unregister(&ubicom32plio80_platform_driver);
-}
-module_exit(ubicom32plio80_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
-MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
+++ /dev/null
-/*
- * drivers/video/ubicom32vfb.c
- * Ubicom32 virtual frame buffer driver
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-/*
- * This driver was based on skeletonfb.c, Skeleton for a frame buffer device by
- * Geert Uytterhoeven.
- */
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/uaccess.h>
-
-#define DRIVER_NAME "ubicom32vfb"
-#define DRIVER_DESCRIPTION "Ubicom32 virtual frame buffer driver"
-
-#define PALETTE_ENTRIES_NO 16
-
-/*
- * Option variables
- *
- * vram_size: VRAM size in kilobytes, subject to alignment
- */
-static int vram_size = 0;
-module_param(vram_size, int, 0);
-MODULE_PARM_DESC(vram_size, "VRAM size, in kilobytes to allocate, should be at least the size of one screen, subject to alignment");
-
-static int xres = 320;
-module_param(xres, int, 0);
-MODULE_PARM_DESC(xres, "x (horizontal) resolution");
-
-static int yres = 240;
-module_param(yres, int, 0);
-MODULE_PARM_DESC(yres, "y (vertical) resolution");
-
-static int bgr = 0;
-module_param(bgr, int, 0);
-MODULE_PARM_DESC(bgr, "display is BGR (Blue is MSB)");
-
-#define BITS_PER_PIXEL 16
-
-/*
- * Buffer alignment, must not be 0
- */
-#define UBICOM32VFB_ALIGNMENT 4
-
-/*
- * fb_fix_screeninfo defines the non-changeable properties of the VDC, depending on what mode it is in.
- */
-static struct fb_fix_screeninfo ubicom32vfb_fix = {
- .id = "Ubicom32",
- .type = FB_TYPE_PACKED_PIXELS,
- .visual = FB_VISUAL_TRUECOLOR,
- .accel = FB_ACCEL_UBICOM32_VFB,
-};
-
-/*
- * Filled in at probe time when we find out what the hardware supports
- */
-static struct fb_var_screeninfo ubicom32vfb_var;
-
-/*
- * Private data structure
- */
-struct ubicom32vfb_drvdata {
- struct fb_info *fbinfo;
- bool cmap_alloc;
-
- /*
- * The address of the framebuffer in memory
- */
- void *fb;
- void *fb_aligned;
-
- /*
- * Total size of vram including alignment allowance
- */
- u32 total_vram_size;
-
- /*
- * Fake palette of 16 colors
- */
- u32 pseudo_palette[PALETTE_ENTRIES_NO];
-};
-
-static struct platform_device *ubicom32vfb_platform_device;
-
-/*
- * ubicom32vfb_pan_display
- * Pans the display to a given location. Supports only y direction panning.
- */
-static int ubicom32vfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
-{
- struct ubicom32vfb_drvdata *ud = (struct ubicom32vfb_drvdata *)fbi->par;
- void *new_addr;
-
- /*
- * Get the last y line that would be displayed. Since we don't support YWRAP,
- * it must be less than our virtual y size.
- */
- u32 lasty = var->yoffset + var->yres;
- if (lasty > fbi->var.yres_virtual) {
- /*
- * We would fall off the end of our frame buffer if we panned here.
- */
- return -EINVAL;
- }
-
- if (var->xoffset) {
- /*
- * We don't support panning in the x direction
- */
- return -EINVAL;
- }
-
- /*
- * Everything looks sane, go ahead and pan
- *
- * We have to calculate a new address for the VDC to look at
- */
- new_addr = ud->fb_aligned + (var->yoffset * fbi->fix.line_length);
-
- return 0;
-}
-
-/*
- * ubicom32vfb_setcolreg
- * Sets a color in our virtual palette
- */
-static int ubicom32vfb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
-{
- u32 *palette = fbi->pseudo_palette;
-
- if (regno >= PALETTE_ENTRIES_NO) {
- return -EINVAL;
- }
-
- /*
- * We only use 8 bits from each color
- */
- red >>= 8;
- green >>= 8;
- blue >>= 8;
-
- /*
- * Convert any grayscale values
- */
- if (fbi->var.grayscale) {
- u16 gray = red + green + blue;
- gray += (gray >> 2) + (gray >> 3) - (gray >> 7);
- gray >>= 2;
- if (gray > 255) {
- gray = 255;
- }
- red = gray;
- blue = gray;
- green = gray;
- }
-
- palette[regno] = (red << fbi->var.red.offset) | (green << fbi->var.green.offset) |
- (blue << fbi->var.blue.offset);
-
- return 0;
-}
-
-/*
- * ubicom32vfb_mmap
- */
-static int ubicom32vfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-{
- struct ubicom32vfb_drvdata *ud = (struct ubicom32vfb_drvdata *)info->par;
-
- vma->vm_start = (unsigned long)(ud->fb_aligned);
-
- vma->vm_end = vma->vm_start + info->fix.smem_len;
-
- /* For those who don't understand how mmap works, go read
- * Documentation/nommu-mmap.txt.
- * For those that do, you will know that the VM_MAYSHARE flag
- * must be set in the vma->vm_flags structure on noMMU
- * Other flags can be set, and are documented in
- * include/linux/mm.h
- */
-
- vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
-
- return 0;
-}
-
-/*
- * ubicom32vfb_check_var
- * Check the var, tweak it but don't change operational parameters.
- */
-static int ubicom32vfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
-{
- struct ubicom32vfb_drvdata *ud = (struct ubicom32vfb_drvdata *)info->par;
- u32 line_size = var->xres * (BITS_PER_PIXEL / 8);
-
- /*
- * See if we can handle this bpp
- */
- if (var->bits_per_pixel > BITS_PER_PIXEL) {
- return -EINVAL;
- }
- var->bits_per_pixel = BITS_PER_PIXEL;
-
- /*
- * See if we have enough memory to handle this resolution
- */
- if ((line_size * var->yres * BITS_PER_PIXEL / 8) > ud->total_vram_size) {
- return -EINVAL;
- }
-
- var->xres_virtual = var->xres;
- var->yres_virtual = ud->total_vram_size / line_size;
-
- var->red.length = 5;
- var->green.length = 6;
- var->green.offset = 5;
- var->blue.length = 5;
- var->transp.offset = var->transp.length = 0;
-
- if (bgr) {
- var->red.offset = 0;
- var->blue.offset = 11;
- } else {
- var->red.offset = 11;
- var->blue.offset = 0;
- }
-
- var->nonstd = 0;
- var->height = -1;
- var->width = -1;
- var->vmode = FB_VMODE_NONINTERLACED;
- var->sync = 0;
-
- return 0;
-}
-
-/*
- * ubicom32vfb_set_par
- * Set the video mode according to info->var
- */
-static int ubicom32vfb_set_par(struct fb_info *info)
-{
- /*
- * Anything changed?
- */
- if ((xres == info->var.xres) && (yres == info->var.yres)) {
- return 0;
- }
-
- /*
- * Implement changes
- */
- xres = info->var.xres;
- yres = info->var.yres;
- info->fix.visual = FB_VISUAL_TRUECOLOR;
- info->fix.xpanstep = 0;
- info->fix.ypanstep = 1;
- info->fix.line_length = xres * (BITS_PER_PIXEL / 8);
-
- return 0;
-}
-
-/*
- * ubicom32vfb_ops
- * List of supported operations
- */
-static struct fb_ops ubicom32vfb_ops =
-{
- .owner = THIS_MODULE,
- .fb_pan_display = ubicom32vfb_pan_display,
- .fb_setcolreg = ubicom32vfb_setcolreg,
- .fb_mmap = ubicom32vfb_mmap,
- .fb_check_var = ubicom32vfb_check_var,
- .fb_set_par = ubicom32vfb_set_par,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
-};
-
-/*
- * ubicom32vfb_release
- */
-static int ubicom32vfb_release(struct device *dev)
-{
- struct ubicom32vfb_drvdata *ud = dev_get_drvdata(dev);
-
- unregister_framebuffer(ud->fbinfo);
-
- if (ud->cmap_alloc) {
- fb_dealloc_cmap(&ud->fbinfo->cmap);
- }
-
- if (ud->fb) {
- kfree(ud->fb);
- }
-
- framebuffer_release(ud->fbinfo);
- dev_set_drvdata(dev, NULL);
-
- return 0;
-}
-
-/*
- * ubicom32vfb_platform_probe
- */
-static int __init ubicom32vfb_platform_probe(struct platform_device *pdev)
-{
- struct ubicom32vfb_drvdata *ud;
- struct fb_info *fbinfo;
- int rc;
- size_t fbsize;
- struct device *dev = &pdev->dev;
- int offset;
-
- /*
- * This is the minimum VRAM size
- */
- fbsize = xres * yres * 2;
- if (!vram_size) {
- vram_size = (fbsize + 1023) / 1024;
- } else {
- if (fbsize > (vram_size * 1024)) {
- dev_err(dev, "Not enough VRAM for display, need >= %u bytes\n", fbsize);
- return -ENOMEM; // should be ebadparam?
- }
- }
-
- /*
- * Allocate the framebuffer instance + our private data
- */
- fbinfo = framebuffer_alloc(sizeof(struct ubicom32vfb_drvdata), &pdev->dev);
- if (!fbinfo) {
- dev_err(dev, "Not enough memory to allocate instance.\n");
- return -ENOMEM;
- }
-
- /*
- * Fill in our private data.
- */
- ud = (struct ubicom32vfb_drvdata *)fbinfo->par;
- ud->fbinfo = fbinfo;
- dev_set_drvdata(dev, ud);
-
- /*
- * Allocate and align the requested amount of VRAM
- */
- ud->total_vram_size = (vram_size * 1024) + UBICOM32VFB_ALIGNMENT;
- ud->fb = kmalloc(ud->total_vram_size, GFP_KERNEL);
- if (ud->fb == NULL) {
- dev_err(dev, "Couldn't allocate VRAM\n");
- rc = -ENOMEM;
- goto fail;
- }
-
- offset = (u32_t)ud->fb & (UBICOM32VFB_ALIGNMENT - 1);
- if (!offset) {
- ud->fb_aligned = ud->fb;
- } else {
- offset = UBICOM32VFB_ALIGNMENT - offset;
- ud->fb_aligned = ud->fb + offset;
- }
-
- /*
- * Clear the entire frame buffer
- */
- memset(ud->fb_aligned, 0, vram_size * 1024);
-
- /*
- * Fill in the fb_var_screeninfo structure
- */
- memset(&ubicom32vfb_var, 0, sizeof(ubicom32vfb_var));
- ubicom32vfb_var.bits_per_pixel = BITS_PER_PIXEL;
- ubicom32vfb_var.red.length = 5;
- ubicom32vfb_var.green.length = 6;
- ubicom32vfb_var.green.offset = 5;
- ubicom32vfb_var.blue.length = 5;
- ubicom32vfb_var.activate = FB_ACTIVATE_NOW;
-
- if (bgr) {
- ubicom32vfb_var.red.offset = 0;
- ubicom32vfb_var.blue.offset = 11;
- } else {
- ubicom32vfb_var.red.offset = 11;
- ubicom32vfb_var.blue.offset = 0;
- }
-
- /*
- * Fill in the fb_info structure
- */
- ud->fbinfo->device = dev;
- ud->fbinfo->screen_base = (void *)ud->fb_aligned;
- ud->fbinfo->fbops = &ubicom32vfb_ops;
- ud->fbinfo->fix = ubicom32vfb_fix;
- ud->fbinfo->fix.smem_start = (u32)ud->fb_aligned;
- ud->fbinfo->fix.smem_len = vram_size * 1024;
- ud->fbinfo->fix.line_length = xres * 2;
- ud->fbinfo->fix.mmio_start = (u32)ud;
- ud->fbinfo->fix.mmio_len = sizeof(struct ubicom32vfb_drvdata);
-
- /*
- * We support panning in the y direction only
- */
- ud->fbinfo->fix.xpanstep = 0;
- ud->fbinfo->fix.ypanstep = 1;
-
- ud->fbinfo->pseudo_palette = ud->pseudo_palette;
- ud->fbinfo->flags = FBINFO_DEFAULT;
- ud->fbinfo->var = ubicom32vfb_var;
- ud->fbinfo->var.xres = xres;
- ud->fbinfo->var.yres = yres;
-
- /*
- * We cannot pan in the X direction, so xres_virtual is xres
- * We can pan in the Y direction, so yres_virtual is vram_size / ud->fbinfo->fix.line_length
- */
- ud->fbinfo->var.xres_virtual = xres;
- ud->fbinfo->var.yres_virtual = (vram_size * 1024) / ud->fbinfo->fix.line_length;
-
- /*
- * Allocate a color map
- */
- rc = fb_alloc_cmap(&ud->fbinfo->cmap, PALETTE_ENTRIES_NO, 0);
- if (rc) {
- dev_err(dev, "Fail to allocate colormap (%d entries)\n",
- PALETTE_ENTRIES_NO);
- goto fail;
- }
- ud->cmap_alloc = true;
-
- /*
- * Register new frame buffer
- */
- rc = register_framebuffer(ud->fbinfo);
- if (rc) {
- dev_err(dev, "Could not register frame buffer\n");
- goto fail;
- }
-
- /*
- * Tell the log we are here
- */
- dev_info(dev, "fbaddr=%p align=%p, size=%uKB screen(%ux%u) virt(%ux%u)\n",
- ud->fb, ud->fb_aligned, vram_size, ud->fbinfo->var.xres, ud->fbinfo->var.yres,
- ud->fbinfo->var.xres_virtual, ud->fbinfo->var.yres_virtual);
-
- /*
- * Success
- */
- return 0;
-
-fail:
- ubicom32vfb_release(dev);
- return rc;
-}
-
-/*
- * ubicom32vfb_platform_remove
- */
-static int ubicom32vfb_platform_remove(struct platform_device *pdev)
-{
- dev_info(&(pdev->dev), "Ubicom32 FB Driver Remove\n");
- return ubicom32vfb_release(&pdev->dev);
-}
-
-static struct platform_driver ubicom32vfb_platform_driver = {
- .probe = ubicom32vfb_platform_probe,
- .remove = ubicom32vfb_platform_remove,
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-#ifndef MODULE
-/*
- * ubicom32vfb_setup
- * Process kernel boot options
- */
-static int __init ubicom32vfb_setup(char *options)
-{
- char *this_opt;
-
- if (!options || !*options) {
- return 0;
- }
-
- while ((this_opt = strsep(&options, ",")) != NULL) {
- if (!*this_opt) {
- continue;
- }
-
- if (!strncmp(this_opt, "vram_size=", 10)) {
- vram_size = simple_strtoul(this_opt + 10, NULL, 0);
- continue;
- }
-
- if (!strncmp(this_opt, "bgr=", 4)) {
- bgr = simple_strtoul(this_opt + 4, NULL, 0);
- continue;
- }
-
- if (!strncmp(this_opt, "xres=", 5)) {
- xres = simple_strtoul(this_opt + 5, NULL, 0);
- continue;
- }
-
- if (!strncmp(this_opt, "yres=", 5)) {
- yres = simple_strtoul(this_opt + 5, NULL, 0);
- continue;
- }
- }
- return 0;
-}
-#endif /* MODULE */
-
-/*
- * ubicom32vfb_init
- */
-static int __devinit ubicom32vfb_init(void)
-{
- int ret;
-
-#ifndef MODULE
- /*
- * Get kernel boot options (in 'video=ubicom32vfb:<options>')
- */
- char *option = NULL;
-
- if (fb_get_options(DRIVER_NAME, &option)) {
- return -ENODEV;
- }
- ubicom32vfb_setup(option);
-#endif /* MODULE */
-
- ret = platform_driver_register(&ubicom32vfb_platform_driver);
-
-#ifdef CONFIG_FB_UBICOM32_VIRTUAL_NOAUTO
- return ret;
-#else
- if (!ret) {
- ubicom32vfb_platform_device = platform_device_alloc(DRIVER_NAME, 0);
-
- if (ubicom32vfb_platform_device)
- ret = platform_device_add(ubicom32vfb_platform_device);
- else
- ret = -ENOMEM;
-
- if (ret) {
- platform_device_put(ubicom32vfb_platform_device);
- platform_driver_unregister(&ubicom32vfb_platform_driver);
- }
- }
-
- return ret;
-#endif
-}
-module_init(ubicom32vfb_init);
-
-/*
- * ubicom32vfb_exit
- */
-static void __exit ubicom32vfb_exit(void)
-{
- platform_device_unregister(ubicom32vfb_platform_device);
- platform_driver_unregister(&ubicom32vfb_platform_driver);
-}
-module_exit(ubicom32vfb_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
-MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
+++ /dev/null
-/*
- * drivers/watchdog/ubi32_wdt.c
- * Ubicom32 Watchdog Driver
- *
- * Originally based on softdog.c
- * Copyright 2006-2007 Analog Devices Inc.
- * Copyright 2006-2007 Michele d'Amico
- * Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/timer.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/fs.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/uaccess.h>
-#include <asm/ip5000.h>
-
-#define WATCHDOG_NAME "ubi32-wdt"
-#define PFX WATCHDOG_NAME ": "
-
-#define OSC1_FREQ 12000000
-#define WATCHDOG_SEC_TO_CYC(x) (OSC1_FREQ * (x))
-#define WATCHDOG_MAX_SEC (0xffffffff / OSC1_FREQ)
-
-#define MIN_PROCESSOR_ADDRESS 0x03000000
-
-static DEFINE_SPINLOCK(ubi32_wdt_spinlock);
-
-#define WATCHDOG_TIMEOUT 20
-
-#if defined(CONFIG_WATCHDOG_NOWAYOUT)
-#define WATCHDOG_NOWAYOUT 1
-#else
-#define WATCHDOG_NOWAYOUT 0
-#endif
-
-static unsigned int timeout = WATCHDOG_TIMEOUT;
-static int nowayout = WATCHDOG_NOWAYOUT;
-static struct watchdog_info ubi32_wdt_info;
-static unsigned long open_check;
-static char expect_close;
-
-#if !defined(CONFIG_SMP)
-#define UBI32_WDT_LOCK(lock, flags) local_irq_save(flags)
-#define UBI32_WDT_UNLOCK(lock, flags) local_irq_restore(flags)
-#define UBI32_WDT_LOCK_CHECK()
-#else
-#define UBI32_WDT_LOCK(lock, flags) spin_lock_irqsave((lock), (flags));
-#define UBI32_WDT_UNLOCK(lock, flags) spin_unlock_irqrestore((lock), (flags));
-#define UBI32_WDT_LOCK_CHECK() BUG_ON(!spin_is_locked(&ubi32_wdt_spinlock));
-#endif
-
-/*
- * ubi32_wdt_remaining()
- * Return the approximate number of seconds remaining
- */
-static int ubi32_wdt_remaining(void)
-{
- int compare;
- int curr;
-
- UBI32_WDT_LOCK_CHECK();
-
- ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, TIMER_TKEYVAL);
- compare = ubicom32_read_reg(&UBICOM32_IO_TIMER->wdcom);
- curr = ubicom32_read_reg(&UBICOM32_IO_TIMER->mptval);
- ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, 0);
- return (compare - curr) / OSC1_FREQ;
-
-}
-
-/*
- * ubi32_wdt_keepalive()
- * Keep the Userspace Watchdog Alive
- *
- * The Userspace watchdog got a KeepAlive: schedule the next timeout.
- */
-static int ubi32_wdt_keepalive(void)
-{
- UBI32_WDT_LOCK_CHECK();
- ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, TIMER_TKEYVAL);
- ubicom32_write_reg(&UBICOM32_IO_TIMER->wdcom,
- ubicom32_read_reg(&UBICOM32_IO_TIMER->mptval)
- + WATCHDOG_SEC_TO_CYC(timeout));
- ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, 0);
- return 0;
-}
-
-/*
- * ubi32_wdt_stop()
- * Stop the on-chip Watchdog
- */
-static int ubi32_wdt_stop(void)
-{
- UBI32_WDT_LOCK_CHECK();
- ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, TIMER_TKEYVAL);
- ubicom32_write_reg(&UBICOM32_IO_TIMER->wdcfg, TIMER_WATCHDOG_DISABLE);
- ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, 0);
- return 0;
-}
-
-/*
- * ubi32_wdt_start()
- * Start the on-chip Watchdog
- */
-static int ubi32_wdt_start(void)
-{
- UBI32_WDT_LOCK_CHECK();
- ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, TIMER_TKEYVAL);
- ubicom32_write_reg(&UBICOM32_IO_TIMER->wdcom,
- ubicom32_read_reg(&UBICOM32_IO_TIMER->mptval)
- + WATCHDOG_SEC_TO_CYC(timeout));
- ubicom32_write_reg(&UBICOM32_IO_TIMER->wdcfg, ~TIMER_WATCHDOG_DISABLE);
- ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, 0);
- return 0;
-}
-
-/*
- * ubi32_wdt_running()
- * Return true if the watchdog is configured
- */
-static int ubi32_wdt_running(void)
-{
- int enabled;
-
- UBI32_WDT_LOCK_CHECK();
- ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, TIMER_TKEYVAL);
- enabled = ubicom32_read_reg(&UBICOM32_IO_TIMER->wdcfg) == ~TIMER_WATCHDOG_DISABLE;
- ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, 0);
- return enabled;
-}
-
-/*
- * ubi32_wdt_set_timeout()
- * Set the Userspace Watchdog timeout
- *
- * - @t: new timeout value (in seconds)
- */
-static int ubi32_wdt_set_timeout(unsigned long t)
-{
- UBI32_WDT_LOCK_CHECK();
-
- if (t > WATCHDOG_MAX_SEC) {
- printk(KERN_WARNING PFX "request to large: %ld [1-%d] sec)\n", t, WATCHDOG_MAX_SEC);
- return -EINVAL;
- }
-
- /*
- * If we are running, then reset the time value so
- * that the new value has an immediate effect.
- */
- timeout = t;
- if (ubi32_wdt_running()) {
- ubi32_wdt_keepalive();
- }
- return 0;
-}
-
-/*
- * ubi32_wdt_open()
- * Open the Device
- */
-static int ubi32_wdt_open(struct inode *inode, struct file *file)
-{
- unsigned long flags;
-
- if (test_and_set_bit(0, &open_check))
- return -EBUSY;
-
- if (nowayout)
- __module_get(THIS_MODULE);
-
- spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
- ubi32_wdt_start();
- spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
-
- return nonseekable_open(inode, file);
-}
-
-/*
- * ubi32_wdt_close()
- * Close the Device
- */
-static int ubi32_wdt_release(struct inode *inode, struct file *file)
-{
- unsigned long flags;
-
- /*
- * If we don't expect a close, then the watchdog continues
- * even though the device is closed. The caller will have
- * a full timeout value to reopen the device and continue
- * stroking it.
- */
- if (expect_close != 42) {
- printk(KERN_CRIT PFX
- "Unexpected close, not stopping watchdog!\n");
- spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
- ubi32_wdt_keepalive();
- spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
- } else {
- spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
- ubi32_wdt_stop();
- spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
- }
-
- expect_close = 0;
- clear_bit(0, &open_check);
- return 0;
-}
-
-/*
- * ubi32_wdt_write()
- * Write to Device
- *
- * If the user writes nothing, nothing happens.
- * If the user writes a V, then we expect a close and allow a release.
- * If the user writes anything else, it is ignored.
- */
-static ssize_t ubi32_wdt_write(struct file *file, const char __user *data,
- size_t len, loff_t *ppos)
-{
- size_t i;
- unsigned long flags;
-
- /*
- * Every write resets the expect_close. The last write
- * must be a V to allow shutdown on close.
- */
- expect_close = 0;
-
- /*
- * Empty writes still ping.
- */
- if (!len) {
- goto ping;
- }
-
- /*
- * If nowayout is set, it does not matter if the caller
- * is trying to send the magic 'V' we will not allow a
- * close to stop us.
- */
- if (nowayout) {
- goto ping;
- }
-
- /*
- * See if the program wrote a 'V' and if so disable
- * the watchdog on release.
- */
- for (i = 0; i < len; i++) {
- char c;
- if (get_user(c, data + i)) {
- return -EFAULT;
- }
-
- if (c == 'V') {
- expect_close = 42;
- }
- }
-
-ping:
- spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
- ubi32_wdt_keepalive();
- spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
- return len;
-}
-
-/*
- * ubi32_wdt_ioctl()
- * Query the watchdog device.
- *
- * Query basic information from the device or ping it, as outlined by the
- * watchdog API.
- */
-static long ubi32_wdt_ioctl(struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- void __user *argp = (void __user *)arg;
- int __user *p = argp;
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- if (copy_to_user(argp, &ubi32_wdt_info, sizeof(ubi32_wdt_info))) {
- return -EFAULT;
- }
- return 0;
-
- case WDIOC_GETSTATUS: {
- unsigned long flags;
- int running;
-
- spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
- running = ubi32_wdt_running();
- spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
- return running;
- }
-
- case WDIOC_GETBOOTSTATUS:
- return ubicom32_get_reset_reason();
-
- case WDIOC_SETOPTIONS: {
- unsigned long flags;
- int options, ret = -EINVAL;
-
- /*
- * The sample application does not pass a pointer
- * but directly passes a value of 1 or 2; however
- * all of the implementations (and thus probably
- * the real applications) pass a pointer to a value.
- *
- * It should be noted that WDIOC_SETOPTIONS is defined as
- * _IOR(WATCHDOG_IOCTL_BASE, 4, int), which means
- * that it should be an int and NOT a pointer.
- *
- * TODO: Examine this code for future chips.
- * TODO: Report the sample code defect.
- */
- if ((int)p < MIN_PROCESSOR_ADDRESS) {
- options = (int)p;
- } else {
- if (get_user(options, p))
- return -EFAULT;
- }
-
- spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
- if (options & WDIOS_DISABLECARD) {
- ubi32_wdt_stop();
- ret = 0;
- }
- if (options & WDIOS_ENABLECARD) {
- ubi32_wdt_start();
- ret = 0;
- }
- spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
- return ret;
- }
-
- case WDIOC_KEEPALIVE: {
- unsigned long flags;
-
- spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
- ubi32_wdt_keepalive();
- spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
- return 0;
- }
-
- case WDIOC_SETTIMEOUT: {
- int new_timeout;
- unsigned long flags;
- int ret = 0;
-
- if (get_user(new_timeout, p))
- return -EFAULT;
-
- spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
- ret = ubi32_wdt_set_timeout(new_timeout);
- spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
- return ret;
-
- }
-
- case WDIOC_GETTIMEOUT:
- return put_user(timeout, p);
-
- case WDIOC_GETTIMELEFT: {
- unsigned long flags;
- int remaining = 0;
-
- spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
- remaining = ubi32_wdt_remaining();
- spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
- return put_user(remaining, p);
- }
-
- default:
- return -ENOTTY;
- }
-}
-
-/*
- * ubi32_wdt_notify_sys()
- * Notification callback function for system events.
- *
- * Turn off the watchdog during a SYS_DOWN or SYS_HALT.
- */
-static int ubi32_wdt_notify_sys(struct notifier_block *this,
- unsigned long code, void *unused)
-{
- if (code == SYS_DOWN || code == SYS_HALT) {
- unsigned long flags;
-
- spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
- ubi32_wdt_stop();
- spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
- }
-
- return NOTIFY_DONE;
-}
-
-#ifdef CONFIG_PM
-static int state_before_suspend;
-
-/*
- * ubi32_wdt_suspend()
- * suspend the watchdog
- *
- * Remember if the watchdog was running and stop it.
- */
-static int ubi32_wdt_suspend(struct platform_device *pdev, pm_message_t state)
-{
- unsigned long flags;
- spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
- state_before_suspend = ubi32_wdt_running();
- ubi32_wdt_stop();
- spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
-
- return 0;
-}
-
-/*
- * ubi32_wdt_resume()
- * Resume the watchdog
- *
- * If the watchdog was running, turn it back on.
- */
-static int ubi32_wdt_resume(struct platform_device *pdev)
-{
- if (state_before_suspend) {
- unsigned long flags;
- spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
- ubi32_wdt_set_timeout(timeout);
- ubi32_wdt_start();
- spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
- }
-
- return 0;
-}
-#else
-# define ubi32_wdt_suspend NULL
-# define ubi32_wdt_resume NULL
-#endif
-
-static const struct file_operations ubi32_wdt_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = ubi32_wdt_write,
- .unlocked_ioctl = ubi32_wdt_ioctl,
- .open = ubi32_wdt_open,
- .release = ubi32_wdt_release,
-};
-
-static struct miscdevice ubi32_wdt_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &ubi32_wdt_fops,
-};
-
-static struct watchdog_info ubi32_wdt_info = {
- .identity = "Ubicom32 Watchdog",
- .options = WDIOF_SETTIMEOUT |
- WDIOF_KEEPALIVEPING |
- WDIOF_MAGICCLOSE,
-};
-
-static struct notifier_block ubi32_wdt_notifier = {
- .notifier_call = ubi32_wdt_notify_sys,
-};
-
-/*
- * ubi32_wdt_probe()
- * Probe/register the watchdog module
- *
- * Registers the misc device and notifier handler. Actual device
- * initialization is handled by ubi32_wdt_open().
- */
-static int __devinit ubi32_wdt_probe(struct platform_device *pdev)
-{
- int ret;
-
- ret = register_reboot_notifier(&ubi32_wdt_notifier);
- if (ret) {
- printk(KERN_ERR PFX
- "cannot register reboot notifier (err=%d)\n", ret);
- return ret;
- }
-
- ret = misc_register(&ubi32_wdt_miscdev);
- if (ret) {
- printk(KERN_ERR PFX
- "cannot register miscdev on minor=%d (err=%d)\n",
- WATCHDOG_MINOR, ret);
- unregister_reboot_notifier(&ubi32_wdt_notifier);
- return ret;
- }
-
- printk(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n",
- timeout, nowayout);
-
- return 0;
-}
-
-/*
- * ubi32_wdt_remove()
- * Uninstall the module
- *
- * Unregisters the misc device and notifier handler. Actual device
- * deinitialization is handled by ubi32_wdt_close().
- */
-static int __devexit ubi32_wdt_remove(struct platform_device *pdev)
-{
- misc_deregister(&ubi32_wdt_miscdev);
- unregister_reboot_notifier(&ubi32_wdt_notifier);
- return 0;
-}
-
-static struct platform_device *ubi32_wdt_device;
-
-static struct platform_driver ubi32_wdt_driver = {
- .probe = ubi32_wdt_probe,
- .remove = __devexit_p(ubi32_wdt_remove),
- .suspend = ubi32_wdt_suspend,
- .resume = ubi32_wdt_resume,
- .driver = {
- .name = WATCHDOG_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-/*
- * ubi32_wdt_init()
- * Initialize the watchdog.
- *
- * Checks the module params and registers the platform device & driver.
- * Real work is in the platform probe function.
- */
-static int __init ubi32_wdt_init(void)
-{
- unsigned long flags;
- int ret;
-
- /*
- * Check that the timeout value is within range
- */
- spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
- ret = ubi32_wdt_set_timeout(timeout);
- spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
- if (ret) {
- return ret;
- }
-
- /*
- * Since this is an on-chip device and needs no board-specific
- * resources, we'll handle all the platform device stuff here.
- */
- ret = platform_driver_register(&ubi32_wdt_driver);
- if (ret) {
- printk(KERN_ERR PFX "unable to register driver\n");
- return ret;
- }
-
- ubi32_wdt_device = platform_device_register_simple(WATCHDOG_NAME, -1, NULL, 0);
- if (IS_ERR(ubi32_wdt_device)) {
- printk(KERN_ERR PFX "unable to register device\n");
- platform_driver_unregister(&ubi32_wdt_driver);
- return PTR_ERR(ubi32_wdt_device);
- }
-
- return 0;
-}
-
-/*
- * ubi32_wdt_exit()
- * Deinitialize module
- *
- * Back out the platform device & driver steps. Real work is in the
- * platform remove function.
- */
-static void __exit ubi32_wdt_exit(void)
-{
- platform_device_unregister(ubi32_wdt_device);
- platform_driver_unregister(&ubi32_wdt_driver);
-}
-
-module_init(ubi32_wdt_init);
-module_exit(ubi32_wdt_exit);
-
-MODULE_AUTHOR("Sol Kavy<sol@ubicom.com>");
-MODULE_DESCRIPTION("Ubicom32 Watchdog Device Driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-
-module_param(timeout, uint, 0);
-MODULE_PARM_DESC(timeout,
- "Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default="
- __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
-
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout,
- "Watchdog cannot be stopped once started (default="
- __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+++ /dev/null
-# ALSA Ubicom32 drivers
-
-menuconfig SND_UBI32
- tristate "Ubicom32 sound devices"
- select SND_PCM
- default n
- help
- Say Y here to include support for audio on the Ubicom32 platform.
- To compile this driver as a module, say M here: the module will be
- called snd_ubi32.
-
-if SND_UBI32
-
-config SND_UBI32_AUDIO_GENERIC_CAPTURE
- bool "Generic Capture Support"
- default n
- help
- Use this option to support ADCs which don't require special drivers.
-
-config SND_UBI32_AUDIO_GENERIC
- bool "Generic Playback Support"
- default n
- help
- Use this option to support DACs which don't require special drivers.
-
-comment "I2C Based Codecs"
-
-config SND_UBI32_AUDIO_CS4350
- bool "Cirrus Logic CS4350 DAC"
- depends on I2C
- default n
- help
- Support for the Cirrus Logic CS4350 DAC.
-
-config SND_UBI32_AUDIO_CS4384
- bool "Cirrus Logic CS4384 DAC"
- depends on I2C
- default n
- help
- Support for the Cirrus Logic CS4384 DAC.
-
-endif #SND_UBI32
+++ /dev/null
-#
-# sound/ubicom32/Makefile
-# Makefile for ALSA
-#
-# (C) Copyright 2009, Ubicom, Inc.
-#
-# This file is part of the Ubicom32 Linux Kernel Port.
-#
-# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-# it and/or modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation, either version 2 of the
-# License, or (at your option) any later version.
-#
-# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with the Ubicom32 Linux Kernel Port. If not,
-# see <http://www.gnu.org/licenses/>.
-#
-# Ubicom32 implementation derived from (with many thanks):
-# arch/m68knommu
-# arch/blackfin
-# arch/parisc
-#
-
-CFLAGS_ubi32.o += -O2
-snd-ubi32-pcm-objs := ubi32-pcm.o
-snd-ubi32-generic-objs := ubi32-generic.o
-snd-ubi32-generic-capture-objs := ubi32-generic-capture.o
-snd-ubi32-cs4350-objs := ubi32-cs4350.o
-snd-ubi32-cs4384-objs := ubi32-cs4384.o
-
-# Toplevel Module Dependency
-obj-$(CONFIG_SND_UBI32) += snd-ubi32-pcm.o
-obj-$(CONFIG_SND_UBI32_AUDIO_GENERIC) += snd-ubi32-generic.o
-obj-$(CONFIG_SND_UBI32_AUDIO_GENERIC_CAPTURE) += snd-ubi32-generic-capture.o
-obj-$(CONFIG_SND_UBI32_AUDIO_CS4350) += snd-ubi32-cs4350.o
-obj-$(CONFIG_SND_UBI32_AUDIO_CS4384) += snd-ubi32-cs4384.o
+++ /dev/null
-/*
- * sound/ubicom32/ubi32-cs4350.c
- * Interface to ubicom32 virtual audio peripheral - using CS4350 DAC
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/i2c.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <sound/core.h>
-#include <sound/tlv.h>
-#include <sound/control.h>
-#include <sound/pcm.h>
-#include <sound/initval.h>
-#include "ubi32.h"
-
-#define DRIVER_NAME "snd-ubi32-cs4350"
-
-/*
- * Module properties
- */
-static const struct i2c_device_id snd_ubi32_cs4350_id[] = {
- {"cs4350", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, ubicom32audio_id);
-
-static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
-
-/*
- * The dB scale for the Cirrus Logic cs4350. The output range is from
- * -127.5 dB to 0 dB.
- */
-static const DECLARE_TLV_DB_SCALE(snd_ubi32_cs4350_db, -12750, 50, 0);
-
-#define ubi32_cs4350_mute_info snd_ctl_boolean_stereo_info
-
-/*
- * Private data for cs4350 chip
- */
-struct ubi32_cs4350_priv {
- /*
- * The current volume settings
- */
- uint8_t volume[2];
-
- /*
- * Bitmask of mutes MSB (unused, ..., unused, right_ch, left_ch) LSB
- */
- uint8_t mute;
-
- /*
- * Lock to protect this struct because callbacks are not atomic.
- */
- spinlock_t lock;
-};
-
-/*
- * The info for the cs4350. The volume currently has one channel,
- * and 255 possible settings.
- */
-static int ubi32_cs4350_volume_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- uinfo->count = 2;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 255; // 8 bits in cirrus logic cs4350 volume register
- return 0;
-}
-
-static int ubi32_cs4350_volume_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct ubi32_snd_priv *ubi32_priv = snd_kcontrol_chip(kcontrol);
- struct ubi32_cs4350_priv *cs4350_priv;
- unsigned long flags;
-
- cs4350_priv = snd_ubi32_priv_get_drv(ubi32_priv);
-
- spin_lock_irqsave(&cs4350_priv->lock, flags);
-
- ucontrol->value.integer.value[0] = cs4350_priv->volume[0];
- ucontrol->value.integer.value[1] = cs4350_priv->volume[1];
-
- spin_unlock_irqrestore(&cs4350_priv->lock, flags);
-
- return 0;
-}
-
-static int ubi32_cs4350_volume_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct ubi32_snd_priv *ubi32_priv = snd_kcontrol_chip(kcontrol);
- struct i2c_client *client = (struct i2c_client *)ubi32_priv->client;
- struct ubi32_cs4350_priv *cs4350_priv;
- unsigned long flags;
- int ret, changed;
- char send[2];
- uint8_t volume_reg_value_left, volume_reg_value_right;
-
- changed = 0;
-
- cs4350_priv = snd_ubi32_priv_get_drv(ubi32_priv);
- volume_reg_value_left = 255 - (ucontrol->value.integer.value[0] & 0xFF);
- volume_reg_value_right = 255 - (ucontrol->value.integer.value[1] & 0xFF);
-
-#if SND_UBI32_DEBUG
- snd_printk(KERN_INFO "Setting volume: writing %d,%d to CS4350 volume registers\n", volume_reg_value_left, volume_reg_value_right);
-#endif
- spin_lock_irqsave(&cs4350_priv->lock, flags);
-
- if (cs4350_priv->volume[0] != ucontrol->value.integer.value[0]) {
- send[0] = 0x05; // left channel
- send[1] = volume_reg_value_left;
- ret = i2c_master_send(client, send, 2);
- if (ret != 2) {
- snd_printk(KERN_ERR "Failed to set channel A volume on CS4350\n");
- return changed;
- }
- cs4350_priv->volume[0] = ucontrol->value.integer.value[0];
- changed = 1;
- }
-
- if (cs4350_priv->volume[1] != ucontrol->value.integer.value[1]) {
- send[0] = 0x06; // right channel
- send[1] = volume_reg_value_right;
- ret = i2c_master_send(client, send, 2);
- if (ret != 2) {
- snd_printk(KERN_ERR "Failed to set channel B volume on CS4350\n");
- return changed;
- }
- cs4350_priv->volume[1] = ucontrol->value.integer.value[1];
- changed = 1;
- }
-
- spin_unlock_irqrestore(&cs4350_priv->lock, flags);
-
- return changed;
-}
-
-static struct snd_kcontrol_new ubi32_cs4350_volume __devinitdata = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
- SNDRV_CTL_ELEM_ACCESS_TLV_READ,
- .name = "PCM Playback Volume",
- .info = ubi32_cs4350_volume_info,
- .get = ubi32_cs4350_volume_get,
- .put = ubi32_cs4350_volume_put,
- .tlv.p = snd_ubi32_cs4350_db,
-};
-
-static int ubi32_cs4350_mute_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct ubi32_snd_priv *ubi32_priv = snd_kcontrol_chip(kcontrol);
- struct ubi32_cs4350_priv *cs4350_priv;
- unsigned long flags;
-
- cs4350_priv = snd_ubi32_priv_get_drv(ubi32_priv);
-
- spin_lock_irqsave(&cs4350_priv->lock, flags);
-
- ucontrol->value.integer.value[0] = cs4350_priv->mute & 1;
- ucontrol->value.integer.value[1] = (cs4350_priv->mute & (1 << 1)) ? 1 : 0;
-
- spin_unlock_irqrestore(&cs4350_priv->lock, flags);
-
- return 0;
-}
-
-static int ubi32_cs4350_mute_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct ubi32_snd_priv *ubi32_priv = snd_kcontrol_chip(kcontrol);
- struct i2c_client *client = (struct i2c_client *)ubi32_priv->client;
- struct ubi32_cs4350_priv *cs4350_priv;
- unsigned long flags;
- int ret, changed;
- char send[2];
- char recv[1];
- uint8_t mute;
-
- changed = 0;
-
- cs4350_priv = snd_ubi32_priv_get_drv(ubi32_priv);
-
- spin_lock_irqsave(&cs4350_priv->lock, flags);
-
- if ((cs4350_priv->mute & 1) != ucontrol->value.integer.value[0]) {
- send[0] = 0x04;
- ret = i2c_master_send(client, send, 1);
- if (ret != 1) {
- snd_printk(KERN_ERR "Failed to write to mute register: channel 0\n");
- return changed;
- }
-
- ret = i2c_master_recv(client, recv, 1);
- if (ret != 1) {
- snd_printk(KERN_ERR "Failed to read mute register: channel 0\n");
- return changed;
- }
-
- mute = recv[0];
-
- if (ucontrol->value.integer.value[0]) {
- cs4350_priv->mute |= 1;
- mute &= ~(1 << 4);
-#if SND_UBI32_DEBUG
- snd_printk(KERN_INFO "Unmuted channel A\n");
-#endif
- } else {
- cs4350_priv->mute &= ~1;
- mute |= (1 << 4);
-#if SND_UBI32_DEBUG
- snd_printk(KERN_INFO "Muted channel A\n");
-#endif
- }
-
- send[0] = 0x04;
- send[1] = mute;
- ret = i2c_master_send(client, send, 2);
- if (ret != 2) {
- snd_printk(KERN_ERR "Failed to set channel A mute on CS4350\n");
- return changed;
- }
- changed = 1;
- }
-
- if (((cs4350_priv->mute & 2) >> 1) != ucontrol->value.integer.value[1]) {
- send[0] = 0x04;
- ret = i2c_master_send(client, send, 1);
- if (ret != 1) {
- snd_printk(KERN_ERR "Failed to write to mute register: channel 1\n");
- return changed;
- }
-
- ret = i2c_master_recv(client, recv, 1);
- if (ret != 1) {
- snd_printk(KERN_ERR "Failed to read mute register: channel 1\n");
- return changed;
- }
-
- mute = recv[0];
-
- if (ucontrol->value.integer.value[1]) {
- cs4350_priv->mute |= (1 << 1);
- mute &= ~(1 << 3);
-#if SND_UBI32_DEBUG
- snd_printk(KERN_INFO "Unmuted channel B\n");
-#endif
- } else {
- cs4350_priv->mute &= ~(1 << 1);
- mute |= (1 << 3);
-#if SND_UBI32_DEBUG
- snd_printk(KERN_INFO "Muted channel B\n");
-#endif
- }
-
- send[0] = 0x04;
- send[1] = mute;
- ret = i2c_master_send(client, send, 2);
- if (ret != 2) {
- snd_printk(KERN_ERR "Failed to set channel A mute on CS4350\n");
- return changed;
- }
- changed = 1;
- }
-
- spin_unlock_irqrestore(&cs4350_priv->lock, flags);
-
- return changed;
-}
-
-static struct snd_kcontrol_new ubi32_cs4350_mute __devinitdata = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
- .name = "PCM Playback Switch",
- .info = ubi32_cs4350_mute_info,
- .get = ubi32_cs4350_mute_get,
- .put = ubi32_cs4350_mute_put,
-};
-
-/*
- * snd_ubi32_cs4350_free
- * Card private data free function
- */
-void snd_ubi32_cs4350_free(struct snd_card *card)
-{
- struct ubi32_snd_priv *ubi32_priv;
- struct ubi32_cs4350_priv *cs4350_priv;
-
- ubi32_priv = card->private_data;
- cs4350_priv = snd_ubi32_priv_get_drv(ubi32_priv);
- if (cs4350_priv) {
- kfree(cs4350_priv);
- }
-}
-
-/*
- * snd_ubi32_cs4350_dac_init
- */
-static int snd_ubi32_cs4350_dac_init(struct i2c_client *client, const struct i2c_device_id *id)
-{
- int ret;
- char send[2];
- char recv[8];
-
- /*
- * Initialize the CS4350 DAC over the I2C interface
- */
- snd_printk(KERN_INFO "Initializing CS4350 DAC\n");
-
- /*
- * Register 0x01: device/revid
- */
- send[0] = 0x01;
- ret = i2c_master_send(client, send, 1);
- if (ret != 1) {
- snd_printk(KERN_ERR "Failed 1st attempt to write to CS4350 register 0x01\n");
- goto fail;
- }
- ret = i2c_master_recv(client, recv, 1);
- if (ret != 1) {
- snd_printk(KERN_ERR "Failed initial read of CS4350 registers\n");
- goto fail;
- }
- snd_printk(KERN_INFO "CS4350 DAC Device/Rev: %08x\n", recv[0]);
-
- /*
- * Register 0x02: Mode control
- * I2S DIF[2:0] = 001, no De-Emphasis, Auto speed mode
- */
- send[0] = 0x02;
- send[1] = 0x10;
- ret = i2c_master_send(client, send, 2);
- if (ret != 2) {
- snd_printk(KERN_ERR "Failed to set CS4350 to I2S mode\n");
- goto fail;
- }
-
- /*
- * Register 0x05/0x06: Volume control
- * Channel A volume set to 0 dB
- * Channel B volume set to 0 dB
- */
- send[0] = 0x05;
- send[1] = 0x00;
- ret = i2c_master_send(client, send, 2);
- if (ret != 2) {
- snd_printk(KERN_ERR "Failed to set channel A volume on CS4350\n");
- goto fail;
- }
-
- send[0] = 0x06;
- send[1] = 0x00;
- ret = i2c_master_send(client, send, 2);
- if (ret != 2) {
- snd_printk(KERN_ERR "Failed to set channel A volume on CS4350\n");
- goto fail;
- }
-
- /*
- * Make sure the changes took place, this helps verify we are talking to
- * the correct chip.
- */
- send[0] = 0x81;
- ret = i2c_master_send(client, send, 1);
- if (ret != 1) {
- snd_printk(KERN_ERR "Failed to initiate readback\n");
- goto fail;
- }
-
- ret = i2c_master_recv(client, recv, 8);
- if (ret != 8) {
- snd_printk(KERN_ERR "Failed second read of CS4350 registers\n");
- goto fail;
- }
-
- if ((recv[1] != 0x10) || (recv[4] != 0x00) || (recv[5] != 0x00)) {
- snd_printk(KERN_ERR "Failed to initialize CS4350 DAC\n");
- goto fail;
- }
-
- snd_printk(KERN_INFO "CS4350 DAC Initialized\n");
- return 0;
-
-fail:
- return -ENODEV;
-}
-
-/*
- * snd_ubi32_cs4350_i2c_probe
- */
-static int snd_ubi32_cs4350_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id)
-{
- struct snd_card *card;
- struct ubi32_snd_priv *ubi32_priv;
- struct ubi32_cs4350_priv *cs4350_priv;
- int err, ret;
- struct platform_device *pdev;
-
- pdev = client->dev.platform_data;
- if (!pdev) {
- return -ENODEV;
- }
-
- /*
- * Initialize the CS4350 DAC
- */
- ret = snd_ubi32_cs4350_dac_init(client, id);
- if (ret < 0) {
- /*
- * Initialization failed. Propagate the error.
- */
- return ret;
- }
-
- /*
- * Create a snd_card structure
- */
- card = snd_card_new(index, "Ubi32-CS4350", THIS_MODULE, sizeof(struct ubi32_snd_priv));
- if (card == NULL) {
- return -ENOMEM;
- }
-
- card->private_free = snd_ubi32_cs4350_free; /* Not sure if correct */
- ubi32_priv = card->private_data;
-
- /*
- * CS4350 DAC has a minimum sample rate of 30khz and an
- * upper limit of 216khz for it's auto-detect.
- */
- ubi32_priv->min_sample_rate = 30000;
- ubi32_priv->max_sample_rate = 216000;
-
- /*
- * Initialize the snd_card's private data structure
- */
- ubi32_priv->card = card;
- ubi32_priv->client = client;
-
- /*
- * Create our private data structure
- */
- cs4350_priv = kzalloc(sizeof(struct ubi32_cs4350_priv), GFP_KERNEL);
- if (!cs4350_priv) {
- snd_card_free(card);
- return -ENOMEM;
- }
- snd_ubi32_priv_set_drv(ubi32_priv, cs4350_priv);
- spin_lock_init(&cs4350_priv->lock);
-
- /*
- * Initial volume is set to max by probe function
- */
- cs4350_priv->volume[0] = 0xFF;
- cs4350_priv->volume[1] = 0xFF;
-
- /*
- * The CS4350 starts off unmuted (bit set = not muted)
- */
- cs4350_priv->mute = 3;
-
- /*
- * Create the new PCM instance
- */
- err = snd_ubi32_pcm_probe(ubi32_priv, pdev);
- if (err < 0) {
- snd_card_free(card);
- return err; /* What is err? Need to include correct file */
- }
-
- strcpy(card->driver, "Ubi32-CS4350");
- strcpy(card->shortname, "Ubi32-CS4350");
- snprintf(card->longname, sizeof(card->longname),
- "%s at sendirq=%d.%d recvirq=%d.%d regs=%p",
- card->shortname, ubi32_priv->tx_irq, ubi32_priv->irq_idx,
- ubi32_priv->rx_irq, ubi32_priv->irq_idx, ubi32_priv->adr);
-
- snd_card_set_dev(card, &client->dev);
-
- /*
- * Set up the mixer components
- */
- err = snd_ctl_add(card, snd_ctl_new1(&ubi32_cs4350_volume, ubi32_priv));
- if (err) {
- snd_printk(KERN_WARNING "Failed to add volume mixer control\n");
- }
- err = snd_ctl_add(card, snd_ctl_new1(&ubi32_cs4350_mute, ubi32_priv));
- if (err) {
- snd_printk(KERN_WARNING "Failed to add mute mixer control\n");
- }
-
- /*
- * Register the sound card
- */
- if ((err = snd_card_register(card)) != 0) {
- snd_printk(KERN_WARNING "snd_card_register error\n");
- }
-
- /*
- * Store card for access from other methods
- */
- i2c_set_clientdata(client, card);
-
- return 0;
-}
-
-/*
- * snd_ubi32_cs4350_i2c_remove
- */
-static int __devexit snd_ubi32_cs4350_i2c_remove(struct i2c_client *client)
-{
- struct snd_card *card;
- struct ubi32_snd_priv *ubi32_priv;
-
- card = i2c_get_clientdata(client);
-
- ubi32_priv = card->private_data;
- snd_ubi32_pcm_remove(ubi32_priv);
-
- snd_card_free(i2c_get_clientdata(client));
- i2c_set_clientdata(client, NULL);
-
- return 0;
-}
-
-/*
- * I2C driver description
- */
-static struct i2c_driver snd_ubi32_cs4350_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
- .id_table = snd_ubi32_cs4350_id,
- .probe = snd_ubi32_cs4350_i2c_probe,
- .remove = __devexit_p(snd_ubi32_cs4350_i2c_remove),
-};
-
-/*
- * Driver init
- */
-static int __init snd_ubi32_cs4350_init(void)
-{
- return i2c_add_driver(&snd_ubi32_cs4350_driver);
-}
-module_init(snd_ubi32_cs4350_init);
-
-/*
- * snd_ubi32_cs4350_exit
- */
-static void __exit snd_ubi32_cs4350_exit(void)
-{
- i2c_del_driver(&snd_ubi32_cs4350_driver);
-}
-module_exit(snd_ubi32_cs4350_exit);
-
-/*
- * Module properties
- */
-MODULE_ALIAS("i2c:" DRIVER_NAME);
-MODULE_AUTHOR("Patrick Tjin");
-MODULE_DESCRIPTION("Driver for Ubicom32 audio devices CS4350");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * sound/ubicom32/ubi32-cs4384.c
- * Interface to ubicom32 virtual audio peripheral - using CS4384 DAC
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/i2c.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/delay.h>
-#include <sound/core.h>
-#include <sound/tlv.h>
-#include <sound/control.h>
-#include <sound/pcm.h>
-#include <sound/initval.h>
-#include <asm/ip5000.h>
-#include <asm/gpio.h>
-#include <asm/audio.h>
-#include <asm/ubi32-cs4384.h>
-#include "ubi32.h"
-
-#define DRIVER_NAME "snd-ubi32-cs4384"
-
-/*
- * Module properties
- */
-static const struct i2c_device_id snd_ubi32_cs4384_id[] = {
- {"cs4384", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, ubicom32audio_id);
-
-static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
-
-/*
- * Mixer properties
- */
-enum {
- /*
- * Be careful of changing the order of these IDs, they
- * are used to index the volume array.
- */
- SND_UBI32_CS4384_FRONT_ID,
- SND_UBI32_CS4384_SURROUND_ID,
- SND_UBI32_CS4384_CENTER_ID,
- SND_UBI32_CS4384_LFE_ID,
- SND_UBI32_CS4384_REAR_ID,
-
- /*
- * This should be the last ID
- */
- SND_UBI32_CS4384_LAST_ID,
-};
-static const u8_t snd_ubi32_cs4384_ch_ofs[] = {0, 2, 4, 5, 6};
-
-static const DECLARE_TLV_DB_SCALE(snd_ubi32_cs4384_db, -12750, 50, 0);
-
-#define snd_ubi32_cs4384_info_mute snd_ctl_boolean_stereo_info
-#define snd_ubi32_cs4384_info_mute_mono snd_ctl_boolean_mono_info
-
-/*
- * Mixer controls
- */
-static int snd_ubi32_cs4384_info_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo);
-static int snd_ubi32_cs4384_get_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);
-static int snd_ubi32_cs4384_put_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);
-static int snd_ubi32_cs4384_get_mute(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);
-static int snd_ubi32_cs4384_put_mute(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);
-
-/*
- * Make sure to update these if the structure below is changed
- */
-#define SND_UBI32_MUTE_CTL_START 5
-#define SND_UBI32_MUTE_CTL_END 9
-static struct snd_kcontrol_new snd_ubi32_cs4384_controls[] __devinitdata = {
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
- SNDRV_CTL_ELEM_ACCESS_TLV_READ,
- .name = "Front Playback Volume",
- .info = snd_ubi32_cs4384_info_volume,
- .get = snd_ubi32_cs4384_get_volume,
- .put = snd_ubi32_cs4384_put_volume,
- .private_value = SND_UBI32_CS4384_FRONT_ID,
- .tlv = {
- .p = snd_ubi32_cs4384_db,
- },
- },
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
- SNDRV_CTL_ELEM_ACCESS_TLV_READ,
- .name = "Surround Playback Volume",
- .info = snd_ubi32_cs4384_info_volume,
- .get = snd_ubi32_cs4384_get_volume,
- .put = snd_ubi32_cs4384_put_volume,
- .private_value = SND_UBI32_CS4384_SURROUND_ID,
- .tlv = {
- .p = snd_ubi32_cs4384_db,
- },
- },
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
- SNDRV_CTL_ELEM_ACCESS_TLV_READ,
- .name = "Center Playback Volume",
- .info = snd_ubi32_cs4384_info_volume,
- .get = snd_ubi32_cs4384_get_volume,
- .put = snd_ubi32_cs4384_put_volume,
- .private_value = SND_UBI32_CS4384_CENTER_ID,
- .tlv = {
- .p = snd_ubi32_cs4384_db,
- },
- },
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
- SNDRV_CTL_ELEM_ACCESS_TLV_READ,
- .name = "LFE Playback Volume",
- .info = snd_ubi32_cs4384_info_volume,
- .get = snd_ubi32_cs4384_get_volume,
- .put = snd_ubi32_cs4384_put_volume,
- .private_value = SND_UBI32_CS4384_LFE_ID,
- .tlv = {
- .p = snd_ubi32_cs4384_db,
- },
- },
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
- SNDRV_CTL_ELEM_ACCESS_TLV_READ,
- .name = "Rear Playback Volume",
- .info = snd_ubi32_cs4384_info_volume,
- .get = snd_ubi32_cs4384_get_volume,
- .put = snd_ubi32_cs4384_put_volume,
- .private_value = SND_UBI32_CS4384_REAR_ID,
- .tlv = {
- .p = snd_ubi32_cs4384_db,
- },
- },
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
- SNDRV_CTL_ELEM_ACCESS_TLV_READ,
- .name = "Front Playback Switch",
- .info = snd_ubi32_cs4384_info_mute,
- .get = snd_ubi32_cs4384_get_mute,
- .put = snd_ubi32_cs4384_put_mute,
- .private_value = SND_UBI32_CS4384_FRONT_ID,
- },
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
- SNDRV_CTL_ELEM_ACCESS_TLV_READ,
- .name = "Surround Playback Switch",
- .info = snd_ubi32_cs4384_info_mute,
- .get = snd_ubi32_cs4384_get_mute,
- .put = snd_ubi32_cs4384_put_mute,
- .private_value = SND_UBI32_CS4384_SURROUND_ID,
- },
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
- SNDRV_CTL_ELEM_ACCESS_TLV_READ,
- .name = "Center Playback Switch",
- .info = snd_ubi32_cs4384_info_mute_mono,
- .get = snd_ubi32_cs4384_get_mute,
- .put = snd_ubi32_cs4384_put_mute,
- .private_value = SND_UBI32_CS4384_CENTER_ID,
- },
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
- SNDRV_CTL_ELEM_ACCESS_TLV_READ,
- .name = "LFE Playback Switch",
- .info = snd_ubi32_cs4384_info_mute_mono,
- .get = snd_ubi32_cs4384_get_mute,
- .put = snd_ubi32_cs4384_put_mute,
- .private_value = SND_UBI32_CS4384_LFE_ID,
- },
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
- SNDRV_CTL_ELEM_ACCESS_TLV_READ,
- .name = "Rear Playback Switch",
- .info = snd_ubi32_cs4384_info_mute,
- .get = snd_ubi32_cs4384_get_mute,
- .put = snd_ubi32_cs4384_put_mute,
- .private_value = SND_UBI32_CS4384_REAR_ID,
- },
-};
-
-/*
- * Our private data
- */
-struct snd_ubi32_cs4384_priv {
- /*
- * Array of current volumes
- * (L, R, SL, SR, C, LFE, RL, RR)
- */
- uint8_t volume[8];
-
- /*
- * Bitmask of mutes
- * MSB (RR, RL, LFE, C, SR, SL, R, L) LSB
- */
- uint8_t mute;
-
- /*
- * Array of controls
- */
- struct snd_kcontrol *kctls[ARRAY_SIZE(snd_ubi32_cs4384_controls)];
-
- /*
- * Lock to protect our card
- */
- spinlock_t lock;
-};
-
-/*
- * snd_ubi32_cs4384_info_volume
- */
-static int snd_ubi32_cs4384_info_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
-{
- unsigned int id = (unsigned int)kcontrol->private_value;
-
- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- uinfo->count = 1;
- if ((id != SND_UBI32_CS4384_LFE_ID) &&
- (id != SND_UBI32_CS4384_CENTER_ID)) {
- uinfo->count = 2;
- }
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 255;
- return 0;
-}
-
-/*
- * snd_ubi32_cs4384_get_volume
- */
-static int snd_ubi32_cs4384_get_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
-{
- struct ubi32_snd_priv *priv = snd_kcontrol_chip(kcontrol);
- struct snd_ubi32_cs4384_priv *cs4384_priv;
- unsigned int id = (unsigned int)kcontrol->private_value;
- int ch = snd_ubi32_cs4384_ch_ofs[id];
- unsigned long flags;
-
- if (id >= SND_UBI32_CS4384_LAST_ID) {
- return -EINVAL;
- }
-
- cs4384_priv = snd_ubi32_priv_get_drv(priv);
-
- spin_lock_irqsave(&cs4384_priv->lock, flags);
-
- ucontrol->value.integer.value[0] = cs4384_priv->volume[ch];
- if ((id != SND_UBI32_CS4384_LFE_ID) &&
- (id != SND_UBI32_CS4384_CENTER_ID)) {
- ch++;
- ucontrol->value.integer.value[1] = cs4384_priv->volume[ch];
- }
-
- spin_unlock_irqrestore(&cs4384_priv->lock, flags);
-
- return 0;
-}
-
-/*
- * snd_ubi32_cs4384_put_volume
- */
-static int snd_ubi32_cs4384_put_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
-{
- struct ubi32_snd_priv *priv = snd_kcontrol_chip(kcontrol);
- struct i2c_client *client = (struct i2c_client *)priv->client;
- struct snd_ubi32_cs4384_priv *cs4384_priv;
- unsigned int id = (unsigned int)kcontrol->private_value;
- int ch = snd_ubi32_cs4384_ch_ofs[id];
- unsigned long flags;
- unsigned char send[3];
- int nch;
- int ret = -EINVAL;
-
- if (id >= SND_UBI32_CS4384_LAST_ID) {
- return -EINVAL;
- }
-
- cs4384_priv = snd_ubi32_priv_get_drv(priv);
-
- spin_lock_irqsave(&cs4384_priv->lock, flags);
-
- send[0] = 0;
- switch (id) {
- case SND_UBI32_CS4384_REAR_ID:
- send[0] = 0x06;
-
- /*
- * Fall through
- */
-
- case SND_UBI32_CS4384_SURROUND_ID:
- send[0] += 0x03;
-
- /*
- * Fall through
- */
-
- case SND_UBI32_CS4384_FRONT_ID:
- send[0] += 0x8B;
- nch = 2;
- send[1] = 255 - (ucontrol->value.integer.value[0] & 0xFF);
- send[2] = 255 - (ucontrol->value.integer.value[1] & 0xFF);
- cs4384_priv->volume[ch++] = send[1];
- cs4384_priv->volume[ch] = send[2];
- break;
-
- case SND_UBI32_CS4384_LFE_ID:
- send[0] = 0x81;
-
- /*
- * Fall through
- */
-
- case SND_UBI32_CS4384_CENTER_ID:
- send[0] += 0x11;
- nch = 1;
- send[1] = 255 - (ucontrol->value.integer.value[0] & 0xFF);
- cs4384_priv->volume[ch] = send[1];
- break;
-
- default:
- spin_unlock_irqrestore(&cs4384_priv->lock, flags);
- goto done;
-
- }
-
- /*
- * Send the volume to the chip
- */
- nch++;
- ret = i2c_master_send(client, send, nch);
- if (ret != nch) {
- snd_printk(KERN_ERR "Failed to set volume on CS4384\n");
- }
-
-done:
- spin_unlock_irqrestore(&cs4384_priv->lock, flags);
-
- return ret;
-}
-
-/*
- * snd_ubi32_cs4384_get_mute
- */
-static int snd_ubi32_cs4384_get_mute(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
-{
- struct ubi32_snd_priv *priv = snd_kcontrol_chip(kcontrol);
- struct snd_ubi32_cs4384_priv *cs4384_priv;
- unsigned int id = (unsigned int)kcontrol->private_value;
- int ch = snd_ubi32_cs4384_ch_ofs[id];
- unsigned long flags;
-
- if (id >= SND_UBI32_CS4384_LAST_ID) {
- return -EINVAL;
- }
-
- cs4384_priv = snd_ubi32_priv_get_drv(priv);
-
- spin_lock_irqsave(&cs4384_priv->lock, flags);
-
- ucontrol->value.integer.value[0] = !(cs4384_priv->mute & (1 << ch));
-
- if ((id != SND_UBI32_CS4384_LFE_ID) &&
- (id != SND_UBI32_CS4384_CENTER_ID)) {
- ch++;
- ucontrol->value.integer.value[1] = !(cs4384_priv->mute & (1 << ch));
- }
-
- spin_unlock_irqrestore(&cs4384_priv->lock, flags);
-
- return 0;
-}
-
-/*
- * snd_ubi32_cs4384_put_mute
- */
-static int snd_ubi32_cs4384_put_mute(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
-{
- struct ubi32_snd_priv *priv = snd_kcontrol_chip(kcontrol);
- struct i2c_client *client = (struct i2c_client *)priv->client;
- struct snd_ubi32_cs4384_priv *cs4384_priv;
- unsigned int id = (unsigned int)kcontrol->private_value;
- int ch = snd_ubi32_cs4384_ch_ofs[id];
- unsigned long flags;
- unsigned char send[2];
- int ret = -EINVAL;
-
- if (id >= SND_UBI32_CS4384_LAST_ID) {
- return -EINVAL;
- }
-
- cs4384_priv = snd_ubi32_priv_get_drv(priv);
-
- spin_lock_irqsave(&cs4384_priv->lock, flags);
-
- if (ucontrol->value.integer.value[0]) {
- cs4384_priv->mute &= ~(1 << ch);
- } else {
- cs4384_priv->mute |= (1 << ch);
- }
-
- if ((id != SND_UBI32_CS4384_LFE_ID) && (id != SND_UBI32_CS4384_CENTER_ID)) {
- ch++;
- if (ucontrol->value.integer.value[1]) {
- cs4384_priv->mute &= ~(1 << ch);
- } else {
- cs4384_priv->mute |= (1 << ch);
- }
- }
-
- /*
- * Update the chip's mute reigster
- */
- send[0] = 0x09;
- send[1] = cs4384_priv->mute;
- ret = i2c_master_send(client, send, 2);
- if (ret != 2) {
- snd_printk(KERN_ERR "Failed to set mute on CS4384\n");
- }
-
- spin_unlock_irqrestore(&cs4384_priv->lock, flags);
-
- return ret;
-}
-
-/*
- * snd_ubi32_cs4384_mixer
- * Setup the mixer controls
- */
-static int __devinit snd_ubi32_cs4384_mixer(struct ubi32_snd_priv *priv)
-{
- struct snd_card *card = priv->card;
- struct snd_ubi32_cs4384_priv *cs4384_priv;
- int i;
-
- cs4384_priv = snd_ubi32_priv_get_drv(priv);
- for (i = 0; i < ARRAY_SIZE(snd_ubi32_cs4384_controls); i++) {
- int err;
-
- cs4384_priv->kctls[i] = snd_ctl_new1(&snd_ubi32_cs4384_controls[i], priv);
- err = snd_ctl_add(card, cs4384_priv->kctls[i]);
- if (err) {
- snd_printk(KERN_WARNING "Failed to add control %d\n", i);
- return err;
- }
- }
- return 0;
-}
-
-/*
- * snd_ubi32_cs4384_free
- * Card private data free function
- */
-void snd_ubi32_cs4384_free(struct snd_card *card)
-{
- struct snd_ubi32_cs4384_priv *cs4384_priv;
- struct ubi32_snd_priv *ubi32_priv;
-
- ubi32_priv = card->private_data;
- cs4384_priv = snd_ubi32_priv_get_drv(ubi32_priv);
- if (cs4384_priv) {
- kfree(cs4384_priv);
- }
-}
-
-/*
- * snd_ubi32_cs4384_setup_mclk
- */
-static int snd_ubi32_cs4384_setup_mclk(struct ubi32_cs4384_platform_data *pdata)
-{
- struct ubicom32_io_port *ioa = (struct ubicom32_io_port *)RA;
- struct ubicom32_io_port *ioc = (struct ubicom32_io_port *)RC;
- struct ubicom32_io_port *iod = (struct ubicom32_io_port *)RD;
- struct ubicom32_io_port *ioe = (struct ubicom32_io_port *)RE;
- struct ubicom32_io_port *ioh = (struct ubicom32_io_port *)RH;
- unsigned int ctl0;
- unsigned int ctlx;
- unsigned int div;
-
- div = pdata->mclk_entries[0].div;
-
- ctl0 = (1 << 13);
- ctlx = ((div - 1) << 16) | (div / 2);
-
- switch (pdata->mclk_src) {
- case UBI32_CS4384_MCLK_PWM_0:
- ioc->function |= 2;
- ioc->ctl0 |= ctl0;
- ioc->ctl1 = ctlx;
- if (!ioa->function) {
- ioa->function = 3;
- }
- return 0;
-
- case UBI32_CS4384_MCLK_PWM_1:
- ioc->function |= 2;
- ioc->ctl0 |= ctl0 << 16;
- ioc->ctl2 = ctlx;
- if (!ioe->function) {
- ioe->function = 3;
- }
- return 0;
-
- case UBI32_CS4384_MCLK_PWM_2:
- ioh->ctl0 |= ctl0;
- ioh->ctl1 = ctlx;
- if (!iod->function) {
- iod->function = 3;
- }
- return 0;
-
- case UBI32_CS4384_MCLK_CLKDIV_1:
- ioa->gpio_mask &= (1 << 7);
- ioa->ctl1 &= ~(0x7F << 14);
- ioa->ctl1 |= ((div - 1) << 14);
- return 0;
-
- case UBI32_CS4384_MCLK_OTHER:
- return 0;
- }
-
- return 1;
-}
-
-/*
- * snd_ubi32_cs4384_set_rate
- */
-static int snd_ubi32_cs4384_set_rate(struct ubi32_snd_priv *priv, int rate)
-{
- struct ubi32_cs4384_platform_data *cpd = priv->pdata->priv_data;
- struct ubicom32_io_port *ioa = (struct ubicom32_io_port *)RA;
- struct ubicom32_io_port *ioc = (struct ubicom32_io_port *)RC;
- struct ubicom32_io_port *ioh = (struct ubicom32_io_port *)RH;
- unsigned int ctl;
- unsigned int div = 0;
- const u16_t mult[] = {64, 96, 128, 192, 256, 384, 512, 768, 1024};
- int i;
- int j;
-
-
- for (i = 0; i < sizeof(mult) / sizeof(u16_t); i++) {
- for (j = 0; j < cpd->n_mclk; j++) {
- if (((unsigned int)rate * (unsigned int)mult[i]) ==
- cpd->mclk_entries[j].rate) {
- div = cpd->mclk_entries[j].div;
- break;
- }
- }
- }
-
- ctl = ((div - 1) << 16) | (div / 2);
-
- switch (cpd->mclk_src) {
- case UBI32_CS4384_MCLK_PWM_0:
- ioc->ctl1 = ctl;
- return 0;
-
- case UBI32_CS4384_MCLK_PWM_1:
- ioc->ctl2 = ctl;
- return 0;
-
- case UBI32_CS4384_MCLK_PWM_2:
- ioh->ctl1 = ctl;
- return 0;
-
- case UBI32_CS4384_MCLK_CLKDIV_1:
- ioa->ctl1 &= ~(0x7F << 14);
- ioa->ctl1 |= ((div - 1) << 14);
- return 0;
-
- case UBI32_CS4384_MCLK_OTHER:
- return 0;
- }
-
- return 1;
-}
-
-/*
- * snd_ubi32_cs4384_set_channels
- * Mute unused channels
- */
-static int snd_ubi32_cs4384_set_channels(struct ubi32_snd_priv *priv, int channels)
-{
- struct i2c_client *client = (struct i2c_client *)priv->client;
- struct snd_ubi32_cs4384_priv *cs4384_priv;
- unsigned char send[2];
- int ret;
- int i;
- unsigned long flags;
-
- /*
- * Only support 0, 2, 4, 6, 8 channels
- */
- if ((channels > 8) || (channels & 1)) {
- return -EINVAL;
- }
-
- cs4384_priv = snd_ubi32_priv_get_drv(priv);
- spin_lock_irqsave(&cs4384_priv->lock, flags);
-
- /*
- * Address 09h, Mute control
- */
- send[0] = 0x09;
- send[1] = (unsigned char)(0xFF << channels);
-
- ret = i2c_master_send(client, send, 2);
-
- spin_unlock_irqrestore(&cs4384_priv->lock, flags);
-
- /*
- * Notify the system that we changed the mutes
- */
- cs4384_priv->mute = (unsigned char)(0xFF << channels);
-
- for (i = SND_UBI32_MUTE_CTL_START; i < SND_UBI32_MUTE_CTL_END; i++) {
- snd_ctl_notify(priv->card, SNDRV_CTL_EVENT_MASK_VALUE,
- &cs4384_priv->kctls[i]->id);
- }
-
- if (ret != 2) {
- return -ENXIO;
- }
-
- return 0;
-}
-
-/*
- * snd_ubi32_cs4384_dac_init
- */
-static int snd_ubi32_cs4384_dac_init(struct i2c_client *client, const struct i2c_device_id *id)
-{
- int ret;
- unsigned char send[2];
- unsigned char recv[2];
-
- /*
- * Initialize the CS4384 DAC over the I2C interface
- */
- snd_printk(KERN_INFO "Initializing CS4384 DAC\n");
-
- /*
- * Register 0x01: device/revid
- */
- send[0] = 0x01;
- ret = i2c_master_send(client, send, 1);
- if (ret != 1) {
- snd_printk(KERN_ERR "Failed 1st attempt to write to CS4384 register 0x01\n");
- goto fail;
- }
- ret = i2c_master_recv(client, recv, 1);
- if (ret != 1) {
- snd_printk(KERN_ERR "Failed initial read of CS4384 registers\n");
- goto fail;
- }
- snd_printk(KERN_INFO "CS4384 DAC Device/Rev: %08x\n", recv[0]);
-
- /*
- * Register 0x02: Mode Control 1
- * Control Port Enable, PCM, All DACs enabled, Power Down
- */
- send[0] = 0x02;
- send[1] = 0x81;
- ret = i2c_master_send(client, send, 2);
- if (ret != 2) {
- snd_printk(KERN_ERR "Failed to set CPEN CS4384\n");
- goto fail;
- }
-
- /*
- * Register 0x08: Ramp and Mute
- * RMP_UP, RMP_DN, PAMUTE, DAMUTE
- */
- send[0] = 0x08;
- send[1] = 0xBC;
- ret = i2c_master_send(client, send, 2);
- if (ret != 2) {
- snd_printk(KERN_ERR "Failed to set CPEN CS4384\n");
- goto fail;
- }
-
- /*
- * Register 0x03: PCM Control
- * I2S DIF[3:0] = 0001, no De-Emphasis, Auto speed mode
- */
- send[0] = 0x03;
- send[1] = 0x13;
- ret = i2c_master_send(client, send, 2);
- if (ret != 2) {
- snd_printk(KERN_ERR "Failed to set CS4384 to I2S mode\n");
- goto fail;
- }
-
- /*
- * Register 0x0B/0x0C: Volume control A1/B1
- * Register 0x0E/0x0F: Volume control A2/B2
- * Register 0x11/0x12: Volume control A3/B3
- * Register 0x14/0x15: Volume control A4/B4
- */
- send[0] = 0x80 | 0x0B;
- send[1] = 0x00;
- send[2] = 0x00;
- ret = i2c_master_send(client, send, 3);
- if (ret != 3) {
- snd_printk(KERN_ERR "Failed to set ch1 volume on CS4384\n");
- goto fail;
- }
-
- send[0] = 0x80 | 0x0E;
- send[1] = 0x00;
- send[2] = 0x00;
- ret = i2c_master_send(client, send, 3);
- if (ret != 3) {
- snd_printk(KERN_ERR "Failed to set ch2 volume on CS4384\n");
- goto fail;
- }
-
- send[0] = 0x80 | 0x11;
- send[1] = 0x00;
- send[2] = 0x00;
- ret = i2c_master_send(client, send, 3);
- if (ret != 3) {
- snd_printk(KERN_ERR "Failed to set ch3 volume on CS4384\n");
- goto fail;
- }
-
- send[0] = 0x80 | 0x14;
- send[1] = 0x00;
- send[2] = 0x00;
- ret = i2c_master_send(client, send, 3);
- if (ret != 3) {
- snd_printk(KERN_ERR "Failed to set ch4 volume on CS4384\n");
- goto fail;
- }
-
- /*
- * Register 09h: Mute control
- * Mute all (we will unmute channels as needed)
- */
- send[0] = 0x09;
- send[1] = 0xFF;
- ret = i2c_master_send(client, send, 2);
- if (ret != 2) {
- snd_printk(KERN_ERR "Failed to power up CS4384\n");
- goto fail;
- }
-
- /*
- * Register 0x02: Mode Control 1
- * Control Port Enable, PCM, All DACs enabled, Power Up
- */
- send[0] = 0x02;
- send[1] = 0x80;
- ret = i2c_master_send(client, send, 2);
- if (ret != 2) {
- snd_printk(KERN_ERR "Failed to power up CS4384\n");
- goto fail;
- }
-
- /*
- * Make sure the changes took place, this helps verify we are talking to
- * the correct chip.
- */
- send[0] = 0x80 | 0x03;
- ret = i2c_master_send(client, send, 1);
- if (ret != 1) {
- snd_printk(KERN_ERR "Failed to initiate readback\n");
- goto fail;
- }
-
- ret = i2c_master_recv(client, recv, 1);
- if (ret != 1) {
- snd_printk(KERN_ERR "Failed second read of CS4384 registers\n");
- goto fail;
- }
-
- if (recv[0] != 0x13) {
- snd_printk(KERN_ERR "Failed to initialize CS4384 DAC\n");
- goto fail;
- }
-
- snd_printk(KERN_INFO "CS4384 DAC Initialized\n");
- return 0;
-
-fail:
- return -ENODEV;
-}
-
-/*
- * snd_ubi32_cs4384_i2c_probe
- */
-static int snd_ubi32_cs4384_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id)
-{
- struct snd_card *card;
- struct ubi32_snd_priv *ubi32_priv;
- int err, ret;
- struct platform_device *pdev;
- struct ubi32_cs4384_platform_data *pdata;
- struct snd_ubi32_cs4384_priv *cs4384_priv;
-
- /*
- * pdev is audio device
- */
- pdev = client->dev.platform_data;
- if (!pdev) {
- return -ENODEV;
- }
-
- /*
- * pdev->dev.platform_data is ubi32-pcm platform_data
- */
- pdata = audio_device_priv(pdev);
- if (!pdata) {
- return -ENODEV;
- }
-
- /*
- * Initialize the CS4384 DAC
- */
- ret = snd_ubi32_cs4384_dac_init(client, id);
- if (ret < 0) {
- /*
- * Initialization failed. Propagate the error.
- */
- return ret;
- }
-
- if (snd_ubi32_cs4384_setup_mclk(pdata)) {
- return -EINVAL;
- }
-
- /*
- * Create a snd_card structure
- */
- card = snd_card_new(index, "Ubi32-CS4384", THIS_MODULE, sizeof(struct ubi32_snd_priv));
- if (card == NULL) {
- return -ENOMEM;
- }
-
- card->private_free = snd_ubi32_cs4384_free;
- ubi32_priv = card->private_data;
-
- /*
- * Initialize the snd_card's private data structure
- */
- ubi32_priv->card = card;
- ubi32_priv->client = client;
- ubi32_priv->set_channels = snd_ubi32_cs4384_set_channels;
- ubi32_priv->set_rate = snd_ubi32_cs4384_set_rate;
-
- /*
- * CS4384 DAC has a minimum sample rate of 4khz and an
- * upper limit of 216khz for it's auto-detect.
- */
- ubi32_priv->min_sample_rate = 4000;
- ubi32_priv->max_sample_rate = 216000;
-
- /*
- * Create our private data (to manage volume, etc)
- */
- cs4384_priv = kzalloc(sizeof(struct snd_ubi32_cs4384_priv), GFP_KERNEL);
- if (!cs4384_priv) {
- snd_card_free(card);
- return -ENOMEM;
- }
- snd_ubi32_priv_set_drv(ubi32_priv, cs4384_priv);
- spin_lock_init(&cs4384_priv->lock);
-
- /*
- * We start off all muted and max volume
- */
- cs4384_priv->mute = 0xFF;
- memset(cs4384_priv->volume, 0xFF, 8);
-
- /*
- * Create the new PCM instance
- */
- err = snd_ubi32_pcm_probe(ubi32_priv, pdev);
- if (err < 0) {
- snd_card_free(card);
- return err; /* What is err? Need to include correct file */
- }
-
- strcpy(card->driver, "Ubi32-CS4384");
- strcpy(card->shortname, "Ubi32-CS4384");
- snprintf(card->longname, sizeof(card->longname),
- "%s at sendirq=%d.%d recvirq=%d.%d regs=%p",
- card->shortname, ubi32_priv->tx_irq, ubi32_priv->irq_idx,
- ubi32_priv->rx_irq, ubi32_priv->irq_idx, ubi32_priv->adr);
-
- snd_card_set_dev(card, &client->dev);
-
- /*
- * Set up the mixer
- */
- snd_ubi32_cs4384_mixer(ubi32_priv);
-
- /*
- * Register the sound card
- */
- if ((err = snd_card_register(card)) != 0) {
- snd_printk(KERN_INFO "snd_card_register error\n");
- }
-
- /*
- * Store card for access from other methods
- */
- i2c_set_clientdata(client, card);
-
- return 0;
-}
-
-/*
- * snd_ubi32_cs4384_i2c_remove
- */
-static int __devexit snd_ubi32_cs4384_i2c_remove(struct i2c_client *client)
-{
- struct snd_card *card;
- struct ubi32_snd_priv *ubi32_priv;
-
- card = i2c_get_clientdata(client);
-
- ubi32_priv = card->private_data;
- snd_ubi32_pcm_remove(ubi32_priv);
-
- snd_card_free(i2c_get_clientdata(client));
- i2c_set_clientdata(client, NULL);
-
- return 0;
-}
-
-/*
- * I2C driver description
- */
-static struct i2c_driver snd_ubi32_cs4384_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
- .id_table = snd_ubi32_cs4384_id,
- .probe = snd_ubi32_cs4384_i2c_probe,
- .remove = __devexit_p(snd_ubi32_cs4384_i2c_remove),
-};
-
-/*
- * Driver init
- */
-static int __init snd_ubi32_cs4384_init(void)
-{
- return i2c_add_driver(&snd_ubi32_cs4384_driver);
-}
-module_init(snd_ubi32_cs4384_init);
-
-/*
- * snd_ubi32_cs4384_exit
- */
-static void __exit snd_ubi32_cs4384_exit(void)
-{
- i2c_del_driver(&snd_ubi32_cs4384_driver);
-}
-module_exit(snd_ubi32_cs4384_exit);
-
-/*
- * Module properties
- */
-MODULE_ALIAS("i2c:" DRIVER_NAME);
-MODULE_AUTHOR("Patrick Tjin");
-MODULE_DESCRIPTION("Driver for Ubicom32 audio devices CS4384");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * sound/ubicom32/ubi32-generic-capture.c
- * Interface to ubicom32 virtual audio peripheral
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/initval.h>
-#include "ubi32.h"
-
-#define DRIVER_NAME "snd-ubi32-generic-capture"
-
-/*
- * Module properties
- */
-static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
-
-/*
- * Card private data free function
- */
-void snd_ubi32_generic_capture_free(struct snd_card *card)
-{
- /*
- * Free all the fields in the snd_ubi32_priv struct
- */
- // Nothing to free at this time because ubi32_priv just maintains pointers
-}
-
-/*
- * Ubicom audio driver probe() method. Args change depending on whether we use
- * platform_device or i2c_device.
- */
-static int snd_ubi32_generic_capture_probe(struct platform_device *dev)
-{
- struct snd_card *card;
- struct ubi32_snd_priv *ubi32_priv;
- int err;
-
- /*
- * Create a snd_card structure
- */
- card = snd_card_new(index, "Ubi32-Generic-C", THIS_MODULE, sizeof(struct ubi32_snd_priv));
-
- if (card == NULL) {
- return -ENOMEM;
- }
-
- card->private_free = snd_ubi32_generic_capture_free; /* Not sure if correct */
- ubi32_priv = card->private_data;
-
- /*
- * Initialize the snd_card's private data structure
- */
- ubi32_priv->card = card;
- ubi32_priv->is_capture = 1;
-
- /*
- * Create the new PCM instance
- */
- err = snd_ubi32_pcm_probe(ubi32_priv, dev);
- if (err < 0) {
- snd_card_free(card);
- return err;
- }
-
- strcpy(card->driver, "Ubi32-Generic-C");
- strcpy(card->shortname, "Ubi32-Generic-C");
- snprintf(card->longname, sizeof(card->longname),
- "%s at sendirq=%d.%d recvirq=%d.%d regs=%p",
- card->shortname, ubi32_priv->tx_irq, ubi32_priv->irq_idx,
- ubi32_priv->rx_irq, ubi32_priv->irq_idx, ubi32_priv->adr);
-
- snd_card_set_dev(card, &dev->dev);
-
- /* Register the sound card */
- if ((err = snd_card_register(card)) != 0) {
- snd_printk(KERN_INFO "snd_card_register error\n");
- }
-
- /* Store card for access from other methods */
- platform_set_drvdata(dev, card);
-
- return 0;
-}
-
-/*
- * Ubicom audio driver remove() method
- */
-static int __devexit snd_ubi32_generic_capture_remove(struct platform_device *dev)
-{
- struct snd_card *card;
- struct ubi32_snd_priv *ubi32_priv;
-
- card = platform_get_drvdata(dev);
- ubi32_priv = card->private_data;
- snd_ubi32_pcm_remove(ubi32_priv);
-
- snd_card_free(platform_get_drvdata(dev));
- platform_set_drvdata(dev, NULL);
- return 0;
-}
-
-/*
- * Platform driver definition
- */
-static struct platform_driver snd_ubi32_generic_capture_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
- .probe = snd_ubi32_generic_capture_probe,
- .remove = __devexit_p(snd_ubi32_generic_capture_remove),
-};
-
-/*
- * snd_ubi32_generic_capture_init
- */
-static int __init snd_ubi32_generic_capture_init(void)
-{
- return platform_driver_register(&snd_ubi32_generic_capture_driver);
-}
-module_init(snd_ubi32_generic_capture_init);
-
-/*
- * snd_ubi32_generic_capture_exit
- */
-static void __exit snd_ubi32_generic_capture_exit(void)
-{
- platform_driver_unregister(&snd_ubi32_generic_capture_driver);
-}
-module_exit(snd_ubi32_generic_capture_exit);
-
-/*
- * Module properties
- */
-//#if defined(CONFIG_SND_UBI32_AUDIO_I2C)
-//MODULE_ALIAS("i2c:snd-ubi32");
-//#endif
-MODULE_AUTHOR("Patrick Tjin");
-MODULE_DESCRIPTION("Driver for Ubicom32 audio devices");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * sound/ubicom32/ubi32-generic.c
- * Interface to ubicom32 virtual audio peripheral
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/initval.h>
-#include "ubi32.h"
-
-#define DRIVER_NAME "snd-ubi32-generic"
-
-/*
- * Module properties
- */
-static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
-
-/*
- * Card private data free function
- */
-void snd_ubi32_generic_free(struct snd_card *card)
-{
- /*
- * Free all the fields in the snd_ubi32_priv struct
- */
- // Nothing to free at this time because ubi32_priv just maintains pointers
-}
-
-/*
- * Ubicom audio driver probe() method. Args change depending on whether we use
- * platform_device or i2c_device.
- */
-static int snd_ubi32_generic_probe(struct platform_device *dev)
-{
- struct snd_card *card;
- struct ubi32_snd_priv *ubi32_priv;
- int err;
-
- /*
- * Create a snd_card structure
- */
- card = snd_card_new(index, "Ubi32-Generic", THIS_MODULE, sizeof(struct ubi32_snd_priv));
-
- if (card == NULL) {
- return -ENOMEM;
- }
-
- card->private_free = snd_ubi32_generic_free; /* Not sure if correct */
- ubi32_priv = card->private_data;
-
- /*
- * Initialize the snd_card's private data structure
- */
- ubi32_priv->card = card;
-
- /*
- * Create the new PCM instance
- */
- err = snd_ubi32_pcm_probe(ubi32_priv, dev);
- if (err < 0) {
- snd_card_free(card);
- return err;
- }
-
- strcpy(card->driver, "Ubi32-Generic");
- strcpy(card->shortname, "Ubi32-Generic");
- snprintf(card->longname, sizeof(card->longname),
- "%s at sendirq=%d.%d recvirq=%d.%d regs=%p",
- card->shortname, ubi32_priv->tx_irq, ubi32_priv->irq_idx,
- ubi32_priv->rx_irq, ubi32_priv->irq_idx, ubi32_priv->adr);
-
- snd_card_set_dev(card, &dev->dev);
-
- /* Register the sound card */
- if ((err = snd_card_register(card)) != 0) {
- snd_printk(KERN_INFO "snd_card_register error\n");
- }
-
- /* Store card for access from other methods */
- platform_set_drvdata(dev, card);
-
- return 0;
-}
-
-/*
- * Ubicom audio driver remove() method
- */
-static int __devexit snd_ubi32_generic_remove(struct platform_device *dev)
-{
- struct snd_card *card;
- struct ubi32_snd_priv *ubi32_priv;
-
- card = platform_get_drvdata(dev);
- ubi32_priv = card->private_data;
- snd_ubi32_pcm_remove(ubi32_priv);
-
- snd_card_free(platform_get_drvdata(dev));
- platform_set_drvdata(dev, NULL);
- return 0;
-}
-
-/*
- * Platform driver definition
- */
-static struct platform_driver snd_ubi32_generic_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
- .probe = snd_ubi32_generic_probe,
- .remove = __devexit_p(snd_ubi32_generic_remove),
-};
-
-/*
- * snd_ubi32_generic_init
- */
-static int __init snd_ubi32_generic_init(void)
-{
- return platform_driver_register(&snd_ubi32_generic_driver);
-}
-module_init(snd_ubi32_generic_init);
-
-/*
- * snd_ubi32_generic_exit
- */
-static void __exit snd_ubi32_generic_exit(void)
-{
- platform_driver_unregister(&snd_ubi32_generic_driver);
-}
-module_exit(snd_ubi32_generic_exit);
-
-/*
- * Module properties
- */
-//#if defined(CONFIG_SND_UBI32_AUDIO_I2C)
-//MODULE_ALIAS("i2c:snd-ubi32");
-//#endif
-MODULE_AUTHOR("Aaron Jow, Patrick Tjin");
-MODULE_DESCRIPTION("Driver for Ubicom32 audio devices");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * sound/ubicom32/ubi32-pcm.c
- * Interface to ubicom32 virtual audio peripheral
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- * arch/m68knommu
- * arch/blackfin
- * arch/parisc
- */
-
-#include <linux/interrupt.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <asm/ip5000.h>
-#include <asm/ubi32-pcm.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include "ubi32.h"
-
-struct ubi32_snd_runtime_data {
- dma_addr_t dma_buffer; /* Physical address of DMA buffer */
- dma_addr_t dma_buffer_end; /* First address beyond end of DMA buffer */
- size_t period_size;
- dma_addr_t period_ptr; /* Physical address of next period */
- unsigned int flags;
-};
-
-static void snd_ubi32_vp_int_set(struct snd_pcm *pcm)
-{
- struct ubi32_snd_priv *ubi32_priv = pcm->private_data;
- ubi32_priv->ar->int_req |= (1 << ubi32_priv->irq_idx);
- ubicom32_set_interrupt(ubi32_priv->tx_irq);
-}
-
-static snd_pcm_uframes_t snd_ubi32_pcm_pointer(struct snd_pcm_substream *substream)
-{
-
- struct ubi32_snd_priv *ubi32_priv = snd_pcm_substream_chip(substream);
- struct audio_dev_regs *adr = ubi32_priv->adr;
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct ubi32_snd_runtime_data *ubi32_rd = substream->runtime->private_data;
-
- dma_addr_t read_pos;
-
- snd_pcm_uframes_t frames;
- if (!adr->primary_os_buffer_ptr) {
- /*
- * If primary_os_buffer_ptr is NULL (e.g. right after the HW is started or
- * when the HW is stopped), then handle this case separately.
- */
- return 0;
- }
-
- read_pos = (dma_addr_t)adr->primary_os_buffer_ptr;
- frames = bytes_to_frames(runtime, read_pos - ubi32_rd->dma_buffer);
- if (frames == runtime->buffer_size) {
- frames = 0;
- }
- return frames;
-}
-
-/*
- * Audio trigger
- */
-static int snd_ubi32_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct ubi32_snd_priv *ubi32_priv = substream->pcm->private_data;
- struct audio_dev_regs *adr = ubi32_priv->adr;
- struct ubi32_snd_runtime_data *ubi32_rd = substream->runtime->private_data;
- int ret = 0;
-
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "snd_ubi32_pcm_trigger cmd=%d=", cmd);
-#endif
-
- if (adr->command != AUDIO_CMD_NONE) {
- snd_printk(KERN_WARNING "Can't send command to audio device at this time\n");
- // Set a timer to call this function back later. How to do this?
- return 0;
- }
-
- /*
- * Set interrupt flag to indicate that we interrupted audio device
- * to send a command
- */
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
-
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "START\n");
-#endif
- /*
- * Ready the DMA transfer
- */
- ubi32_rd->period_ptr = ubi32_rd->dma_buffer;
-
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "trigger period_ptr=%lx\n", (unsigned long)ubi32_rd->period_ptr);
-#endif
- adr->dma_xfer_requests[0].ptr = (void *)ubi32_rd->period_ptr;
- adr->dma_xfer_requests[0].ctr = ubi32_rd->period_size;
- adr->dma_xfer_requests[0].active = 1;
-
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "xfer_request 0 ptr=0x%x ctr=%u\n", ubi32_rd->period_ptr, ubi32_rd->period_size);
-#endif
-
- ubi32_rd->period_ptr += ubi32_rd->period_size;
- adr->dma_xfer_requests[1].ptr = (void *)ubi32_rd->period_ptr;
- adr->dma_xfer_requests[1].ctr = ubi32_rd->period_size;
- adr->dma_xfer_requests[1].active = 1;
-
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "xfer_request 1 ptr=0x%x ctr=%u\n", ubi32_rd->period_ptr, ubi32_rd->period_size);
-#endif
-
- /*
- * Tell the VP that we want to begin playback by filling in the
- * command field and then interrupting the audio VP
- */
- adr->int_flags |= AUDIO_INT_FLAG_COMMAND;
- adr->command = AUDIO_CMD_START;
- snd_ubi32_vp_int_set(substream->pcm);
- break;
-
- case SNDRV_PCM_TRIGGER_STOP:
-
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "STOP\n");
-#endif
-
- /*
- * Tell the VP that we want to stop playback by filling in the
- * command field and then interrupting the audio VP
- */
- adr->int_flags |= AUDIO_INT_FLAG_COMMAND;
- adr->command = AUDIO_CMD_STOP;
- snd_ubi32_vp_int_set(substream->pcm);
- break;
-
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "PAUSE_PUSH\n");
-#endif
-
- /*
- * Tell the VP that we want to pause playback by filling in the
- * command field and then interrupting the audio VP
- */
- adr->int_flags |= AUDIO_INT_FLAG_COMMAND;
- adr->command = AUDIO_CMD_PAUSE;
- snd_ubi32_vp_int_set(substream->pcm);
- break;
-
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "PAUSE_RELEASE\n");
-#endif
- /*
- * Tell the VP that we want to resume paused playback by filling
- * in the command field and then interrupting the audio VP
- */
- adr->int_flags |= AUDIO_INT_FLAG_COMMAND;
- adr->command = AUDIO_CMD_RESUME;
- snd_ubi32_vp_int_set(substream->pcm);
- break;
-
- default:
- snd_printk(KERN_WARNING "Unhandled trigger\n");
- ret = -EINVAL;
- break;
- }
-
- return ret;
-}
-
-/*
- * Prepare to transfer an audio stream to the codec
- */
-static int snd_ubi32_pcm_prepare(struct snd_pcm_substream *substream)
-{
- /*
- * Configure registers and setup the runtime instance for DMA transfers
- */
- struct ubi32_snd_priv *ubi32_priv = substream->pcm->private_data;
- struct audio_dev_regs *adr = ubi32_priv->adr;
-
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "snd_ubi32_pcm_prepare: sending STOP command to audio device\n");
-#endif
-
- /*
- * Make sure the audio device is stopped
- */
-
- /*
- * Set interrupt flag to indicate that we interrupted audio device
- * to send a command
- */
- adr->int_flags |= AUDIO_INT_FLAG_COMMAND;
- adr->command = AUDIO_CMD_STOP;
- snd_ubi32_vp_int_set(substream->pcm);
-
- return 0;
-}
-
-/*
- * Allocate DMA buffers from preallocated memory.
- * Preallocation was done in snd_ubi32_pcm_new()
- */
-static int snd_ubi32_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *hw_params)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct ubi32_snd_priv *ubi32_priv = substream->pcm->private_data;
- struct audio_dev_regs *adr = ubi32_priv->adr;
- struct ubi32_snd_runtime_data *ubi32_rd = substream->runtime->private_data;
-
- /*
- * Use pre-allocated memory from ubi32_snd_pcm_new() to satisfy
- * this memory request.
- */
- int ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
- if (ret < 0) {
- return ret;
- }
-
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "snd_ubi32_pcm_hw_params\n");
-#endif
-
- if (!(adr->channel_mask & (1 << params_channels(hw_params)))) {
- snd_printk(KERN_INFO "snd_ubi32_pcm_hw_params unsupported number of channels %d mask %08x\n", params_channels(hw_params), adr->channel_mask);
- return -EINVAL;
- }
-
- if (ubi32_priv->set_channels) {
- int ret = ubi32_priv->set_channels(ubi32_priv, params_channels(hw_params));
- if (ret) {
- snd_printk(KERN_WARNING "Unable to set channels to %d, ret=%d\n", params_channels(hw_params), ret);
- return ret;
- }
- }
-
- if (ubi32_priv->set_rate) {
- int ret = ubi32_priv->set_rate(ubi32_priv, params_rate(hw_params));
- if (ret) {
- snd_printk(KERN_WARNING "Unable to set rate to %d, ret=%d\n", params_rate(hw_params), ret);
- return ret;
- }
- }
-
- if (ubi32_priv->pdata->set_rate) {
- int ret = ubi32_priv->pdata->set_rate(ubi32_priv->pdata->appdata, params_rate(hw_params));
- if (ret) {
- snd_printk(KERN_WARNING "Unable to set rate to %d, ret=%d\n", params_rate(hw_params), ret);
- return ret;
- }
- }
-
- if (adr->command != AUDIO_CMD_NONE) {
- snd_printk(KERN_WARNING "snd_ubi32_pcm_hw_params: tio busy\n");
- return -EAGAIN;
- }
-
- if (params_format(hw_params) == SNDRV_PCM_FORMAT_S16_LE) {
- adr->flags |= CMD_START_FLAG_LE;
- } else {
- adr->flags &= ~CMD_START_FLAG_LE;
- }
- adr->channels = params_channels(hw_params);
- adr->sample_rate = params_rate(hw_params);
- adr->command = AUDIO_CMD_SETUP;
- adr->int_flags |= AUDIO_INT_FLAG_COMMAND;
- snd_ubi32_vp_int_set(substream->pcm);
-
- /*
- * Wait for the command to complete
- */
- while (adr->command != AUDIO_CMD_NONE) {
- udelay(1);
- }
-
- /*
- * Put the DMA info into the DMA descriptor that we will
- * use to do transfers to our audio VP "hardware"
- */
-
- /*
- * Mark both DMA transfers as not ready/inactive
- */
- adr->dma_xfer_requests[0].active = 0;
- adr->dma_xfer_requests[1].active = 0;
-
- /*
- * Put the location of the buffer into the runtime data instance
- */
- ubi32_rd->dma_buffer = (dma_addr_t)runtime->dma_area;
- ubi32_rd->dma_buffer_end = (dma_addr_t)(runtime->dma_area + runtime->dma_bytes);
-
- /*
- * Get the period size
- */
- ubi32_rd->period_size = params_period_bytes(hw_params);
-
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "DMA for ubi32 audio initialized dma_area=0x%x dma_bytes=%d, period_size=%d\n", (unsigned int)runtime->dma_area, (unsigned int)runtime->dma_bytes, ubi32_rd->period_size);
- snd_printk(KERN_INFO "Private buffer ubi32_rd: dma_buffer=0x%x dma_buffer_end=0x%x ret=%d\n", ubi32_rd->dma_buffer, ubi32_rd->dma_buffer_end, ret);
-#endif
-
- return ret;
-}
-
-/*
- * This is the reverse of snd_ubi32_pcm_hw_params
- */
-static int snd_ubi32_pcm_hw_free(struct snd_pcm_substream *substream)
-{
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "snd_ubi32_pcm_hw_free\n");
-#endif
- return snd_pcm_lib_free_pages(substream);
-}
-
-/*
- * Audio virtual peripheral capabilities (capture and playback are identical)
- */
-static struct snd_pcm_hardware snd_ubi32_pcm_hw =
-{
- .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME),
- .buffer_bytes_max = (64*1024),
- .period_bytes_min = 64,
- .period_bytes_max = 8184,//8184,//8176,
- .periods_min = 2,
- .periods_max = 255,
- .fifo_size = 0, // THIS IS IGNORED BY ALSA
-};
-
-/*
- * We fill this in later
- */
-static struct snd_pcm_hw_constraint_list ubi32_pcm_rates;
-
-/*
- * snd_ubi32_pcm_close
- */
-static int snd_ubi32_pcm_close(struct snd_pcm_substream *substream)
-{
- /* Disable codec, stop DMA, free private data structures */
- //struct ubi32_snd_priv *ubi32_priv = snd_pcm_substream_chip(substream);
- struct ubi32_snd_runtime_data *ubi32_rd = substream->runtime->private_data;
-
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "snd_ubi32_pcm_close\n");
-#endif
-
- substream->runtime->private_data = NULL;
-
- kfree(ubi32_rd);
-
- return 0;
-}
-
-/*
- * snd_ubi32_pcm_open
- */
-static int snd_ubi32_pcm_open(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct ubi32_snd_runtime_data *ubi32_rd;
- int ret = 0;
-
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "ubi32 pcm open\n");
-#endif
-
- /* Associate capabilities with component */
- runtime->hw = snd_ubi32_pcm_hw;
-
- /*
- * Inform ALSA about constraints of the audio device
- */
- ret = snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &ubi32_pcm_rates);
- if (ret < 0) {
- snd_printk(KERN_INFO "invalid rate\n");
- goto out;
- }
-
- /* Force the buffer size to be an integer multiple of period size */
- ret = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
- if (ret < 0) {
- snd_printk(KERN_INFO "invalid period\n");
- goto out;
- }
- /* Initialize structures/registers */
- ubi32_rd = kzalloc(sizeof(struct ubi32_snd_runtime_data), GFP_KERNEL);
- if (ubi32_rd == NULL) {
- ret = -ENOMEM;
- goto out;
- }
-
- runtime->private_data = ubi32_rd;
-
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "snd_ubi32_pcm_open returned 0\n");
-#endif
-
- return 0;
-out:
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "snd_ubi32_pcm_open returned %d\n", ret);
-#endif
-
- return ret;
-}
-
-static struct snd_pcm_ops snd_ubi32_pcm_ops = {
- .open = snd_ubi32_pcm_open, /* Open */
- .close = snd_ubi32_pcm_close, /* Close */
- .ioctl = snd_pcm_lib_ioctl, /* Generic IOCTL handler */
- .hw_params = snd_ubi32_pcm_hw_params, /* Hardware parameters/capabilities */
- .hw_free = snd_ubi32_pcm_hw_free, /* Free function for hw_params */
- .prepare = snd_ubi32_pcm_prepare,
- .trigger = snd_ubi32_pcm_trigger,
- .pointer = snd_ubi32_pcm_pointer,
-};
-
-/*
- * Interrupt handler that gets called when the audio device
- * interrupts Linux
- */
-static irqreturn_t snd_ubi32_pcm_interrupt(int irq, void *appdata)
-{
- struct snd_pcm *pcm = (struct snd_pcm *)appdata;
- struct ubi32_snd_priv *ubi32_priv = pcm->private_data;
- struct audio_dev_regs *adr = ubi32_priv->adr;
- struct snd_pcm_substream *substream;
- struct ubi32_snd_runtime_data *ubi32_rd;
- int dma_to_fill = 0;
-
- /*
- * Check to see if the interrupt is for us
- */
- if (!(ubi32_priv->ar->int_status & (1 << ubi32_priv->irq_idx))) {
- return IRQ_NONE;
- }
-
- /*
- * Clear the interrupt
- */
- ubi32_priv->ar->int_status &= ~(1 << ubi32_priv->irq_idx);
-
- /*
- * We only have one stream since we don't mix. Therefore
- * we don't need to search through substreams.
- */
- if (ubi32_priv->is_capture) {
- substream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream;
- } else {
- substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
- }
-
- if (!substream->runtime) {
- snd_printk(KERN_WARNING "No runtime data\n");
- return IRQ_NONE;
- }
-
- ubi32_rd = substream->runtime->private_data;
-
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "Ubi32 ALSA interrupt\n");
-#endif
-
- if (ubi32_rd == NULL) {
- snd_printk(KERN_WARNING "No private data\n");
- return IRQ_NONE;
- }
-
- // Check interrupt cause
- if (0) {
- // Handle the underflow case
- } else if ((adr->status & AUDIO_STATUS_PLAY_DMA0_REQUEST) ||
- (adr->status & AUDIO_STATUS_PLAY_DMA1_REQUEST)) {
- if (adr->status & AUDIO_STATUS_PLAY_DMA0_REQUEST) {
- dma_to_fill = 0;
- adr->status &= ~AUDIO_STATUS_PLAY_DMA0_REQUEST;
- } else if (adr->status & AUDIO_STATUS_PLAY_DMA1_REQUEST) {
- dma_to_fill = 1;
- adr->status &= ~AUDIO_STATUS_PLAY_DMA1_REQUEST;
- }
- ubi32_rd->period_ptr += ubi32_rd->period_size;
- if (ubi32_rd->period_ptr >= ubi32_rd->dma_buffer_end) {
- ubi32_rd->period_ptr = ubi32_rd->dma_buffer;
- }
- adr->dma_xfer_requests[dma_to_fill].ptr = (void *)ubi32_rd->period_ptr;
- adr->dma_xfer_requests[dma_to_fill].ctr = ubi32_rd->period_size;
- adr->dma_xfer_requests[dma_to_fill].active = 1;
-#ifdef CONFIG_SND_DEBUG
- snd_printk(KERN_INFO "xfer_request %d ptr=0x%x ctr=%u\n", dma_to_fill, ubi32_rd->period_ptr, ubi32_rd->period_size);
-#endif
- adr->int_flags |= AUDIO_INT_FLAG_MORE_SAMPLES;
- snd_ubi32_vp_int_set(substream->pcm);
- }
- // If we are interrupted by the VP, that means we completed
- // processing one period of audio. We need to inform the upper
- // layers of ALSA of this.
- snd_pcm_period_elapsed(substream);
-
- return IRQ_HANDLED;
-}
-
-void __devexit snd_ubi32_pcm_remove(struct ubi32_snd_priv *ubi32_priv)
-{
- struct snd_pcm *pcm = ubi32_priv->pcm;
- free_irq(ubi32_priv->rx_irq, pcm);
-}
-
-#if SNDRV_PCM_RATE_5512 != 1 << 0 || SNDRV_PCM_RATE_192000 != 1 << 12
-#error "Change this table to match pcm.h"
-#endif
-static unsigned int rates[] __initdata = {5512, 8000, 11025, 16000, 22050,
- 32000, 44100, 48000, 64000, 88200,
- 96000, 176400, 192000};
-
-/*
- * snd_ubi32_pcm_probe
- */
-int __devinit snd_ubi32_pcm_probe(struct ubi32_snd_priv *ubi32_priv, struct platform_device *pdev)
-{
- struct snd_pcm *pcm;
- int ret, err;
- int i;
- int j;
- int nrates;
- unsigned int rate_max = 0;
- unsigned int rate_min = 0xFFFFFFFF;
- unsigned int rate_mask = 0;
- struct audio_dev_regs *adr;
- struct resource *res_adr;
- struct resource *res_irq_tx;
- struct resource *res_irq_rx;
- struct ubi32pcm_platform_data *pdata;
-
- pdata = pdev->dev.platform_data;
- if (!pdata) {
- return -ENODEV;
- }
-
- /*
- * Get our resources, adr is the hardware driver base address
- * and the tx and rx irqs are used to communicate with the
- * hardware driver.
- */
- res_adr = platform_get_resource(pdev, IORESOURCE_MEM, AUDIO_MEM_RESOURCE);
- res_irq_tx = platform_get_resource(pdev, IORESOURCE_IRQ, AUDIO_TX_IRQ_RESOURCE);
- res_irq_rx = platform_get_resource(pdev, IORESOURCE_IRQ, AUDIO_RX_IRQ_RESOURCE);
- if (!res_adr || !res_irq_tx || !res_irq_rx) {
- snd_printk(KERN_WARNING "Could not get resources");
- return -ENODEV;
- }
-
- ubi32_priv->ar = (struct audio_regs *)res_adr->start;
- ubi32_priv->tx_irq = res_irq_tx->start;
- ubi32_priv->rx_irq = res_irq_rx->start;
- ubi32_priv->irq_idx = pdata->inst_num;
- ubi32_priv->adr = &(ubi32_priv->ar->adr[pdata->inst_num]);
-
- /*
- * Check the version
- */
- adr = ubi32_priv->adr;
- if (adr->version != AUDIO_DEV_REGS_VERSION) {
- snd_printk(KERN_WARNING "This audio_dev_reg is not compatible with this driver\n");
- return -ENODEV;
- }
-
- /*
- * Find out the standard rates, also find max and min rates
- */
- for (i = 0; i < ARRAY_SIZE(rates); i++) {
- int found = 0;
- for (j = 0; j < adr->n_sample_rates; j++) {
- if (rates[i] == adr->sample_rates[j]) {
- /*
- * Check to see if it is supported by the dac
- */
- if ((rates[i] >= ubi32_priv->min_sample_rate) &&
- (!ubi32_priv->max_sample_rate ||
- (ubi32_priv->max_sample_rate && (rates[i] <= ubi32_priv->max_sample_rate)))) {
- found = 1;
- rate_mask |= (1 << i);
- nrates++;
- if (rates[i] < rate_min) {
- rate_min = rates[i];
- }
- if (rates[i] > rate_max) {
- rate_max = rates[i];
- }
- break;
- }
- }
- }
- if (!found) {
- rate_mask |= SNDRV_PCM_RATE_KNOT;
- }
- }
-
- snd_ubi32_pcm_hw.rates = rate_mask;
- snd_ubi32_pcm_hw.rate_min = rate_min;
- snd_ubi32_pcm_hw.rate_max = rate_max;
- ubi32_pcm_rates.count = adr->n_sample_rates;
- ubi32_pcm_rates.list = (unsigned int *)adr->sample_rates;
- ubi32_pcm_rates.mask = 0;
-
- for (i = 0; i < 32; i++) {
- if (adr->channel_mask & (1 << i)) {
- if (!snd_ubi32_pcm_hw.channels_min) {
- snd_ubi32_pcm_hw.channels_min = i;
- }
- snd_ubi32_pcm_hw.channels_max = i;
- }
- }
- snd_printk(KERN_INFO "Ubi32PCM: channels_min:%u channels_max:%u\n",
- snd_ubi32_pcm_hw.channels_min,
- snd_ubi32_pcm_hw.channels_max);
-
- if (adr->caps & AUDIONODE_CAP_BE) {
- snd_ubi32_pcm_hw.formats |= SNDRV_PCM_FMTBIT_S16_BE;
- }
- if (adr->caps & AUDIONODE_CAP_LE) {
- snd_ubi32_pcm_hw.formats |= SNDRV_PCM_FMTBIT_S16_LE;
- }
-
- snd_printk(KERN_INFO "Ubi32PCM: rates:%08x min:%u max:%u count:%d fmts:%016llx (%s)\n",
- snd_ubi32_pcm_hw.rates,
- snd_ubi32_pcm_hw.rate_min,
- snd_ubi32_pcm_hw.rate_max,
- ubi32_pcm_rates.count,
- snd_ubi32_pcm_hw.formats,
- ubi32_priv->is_capture ? "capture" : "playback");
-
- if (ubi32_priv->is_capture) {
- ret = snd_pcm_new(ubi32_priv->card, "Ubi32 PCM", 0, 0, 1, &pcm);
- } else {
- ret = snd_pcm_new(ubi32_priv->card, "Ubi32 PCM", 0, 1, 0, &pcm);
- }
-
- if (ret < 0) {
- return ret;
- }
-
- pcm->private_data = ubi32_priv;
- ubi32_priv->pcm = pcm;
- ubi32_priv->pdata = pdata;
-
- pcm->info_flags = 0;
-
- strcpy(pcm->name, "Ubi32-PCM");
-
- snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
- snd_dma_continuous_data(GFP_KERNEL),
- 45*1024, 64*1024);
-
- if (ubi32_priv->is_capture) {
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_ubi32_pcm_ops);
- } else {
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_ubi32_pcm_ops);
- }
-
- /*
- * Start up the audio device
- */
- adr->int_flags |= AUDIO_INT_FLAG_COMMAND;
- adr->command = AUDIO_CMD_ENABLE;
- snd_ubi32_vp_int_set(pcm);
-
- /*
- * Request IRQ
- */
- err = request_irq(ubi32_priv->rx_irq, snd_ubi32_pcm_interrupt, IRQF_SHARED | IRQF_DISABLED, pcm->name, pcm);
- if (err) {
- snd_printk(KERN_WARNING "request_irq failed: irq=%d err=%d\n", ubi32_priv->rx_irq, err);
- return -ENODEV;
- }
-
- return ret;
-
-}
+++ /dev/null
-/*
- * sound/ubicom32/ubi32.h
- * Common header file for all ubi32- sound drivers
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port. If not,
- * see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef _UBI32_H
-#define _UBI32_H
-
-#define SND_UBI32_DEBUG 0 // Debug flag
-
-#include <linux/platform_device.h>
-#include <asm/devtree.h>
-#include <asm/audio.h>
-#include <asm/ubi32-pcm.h>
-
-struct ubi32_snd_priv;
-
-typedef int (*set_channels_t)(struct ubi32_snd_priv *priv, int channels);
-typedef int (*set_rate_t)(struct ubi32_snd_priv *priv, int rate);
-
-struct ubi32_snd_priv {
- /*
- * Any variables that are needed locally here but NOT in
- * the VP itself should go in here.
- */
- struct snd_card *card;
- struct snd_pcm *pcm;
-
- /*
- * capture (1) or playback (0)
- */
- int is_capture;
- /*
- * DAC parameters. These are the parameters for the specific
- * DAC we are driving. The I2S component can run at a range
- * of frequencies, but the DAC may be limited. We may want
- * to make this an array of some sort in the future?
- *
- * min/max_sample_rate if set to 0 are ignored.
- */
- int max_sample_rate;
- int min_sample_rate;
-
- /*
- * The size a period (group) of audio samples. The VP does
- * not need to know this; each DMA transfer is made to be
- * one period.
- */
- u32_t period_size;
-
- spinlock_t ubi32_lock;
-
- struct audio_regs *ar;
- struct audio_dev_regs *adr;
- u32 irq_idx;
- u8 tx_irq;
- u8 rx_irq;
-
- void *client;
-
- /*
- * Operations which the base DAC driver can implement
- */
- set_channels_t set_channels;
- set_rate_t set_rate;
-
- /*
- * platform data
- */
- struct ubi32pcm_platform_data *pdata;
-
- /*
- * Private driver data (used for DAC driver control, etc)
- */
- void *drvdata;
-};
-
-#define snd_ubi32_priv_get_drv(priv) ((priv)->drvdata)
-#define snd_ubi32_priv_set_drv(priv, data) (((priv)->drvdata) = (void *)(data))
-
-extern int snd_ubi32_pcm_probe(struct ubi32_snd_priv *ubi32_priv, struct platform_device *pdev);
-extern void snd_ubi32_pcm_remove(struct ubi32_snd_priv *ubi32_priv);
-
-#endif
+++ /dev/null
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-# use default targets for everything
-
-$(eval $(call BuildImage))
+++ /dev/null
---- a/drivers/char/hw_random/Kconfig
-+++ b/drivers/char/hw_random/Kconfig
-@@ -148,3 +148,16 @@ config HW_RANDOM_VIRTIO
-
- To compile this driver as a module, choose M here: the
- module will be called virtio-rng. If unsure, say N.
-+
-+config HW_RANDOM_UBICOM32
-+ tristate "Ubicom32 HW Random Number Generator support"
-+ depends on HW_RANDOM && UBICOM32
-+ default HW_RANDOM
-+ ---help---
-+ This driver provides kernel-side support for the Random Number
-+ Generator hardware found on Ubicom32 processors.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called pasemi-rng.
-+
-+ If unsure, say Y.
---- a/drivers/char/hw_random/Makefile
-+++ b/drivers/char/hw_random/Makefile
-@@ -15,3 +15,4 @@ obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx
- obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
- obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
- obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
-+obj-$(CONFIG_HW_RANDOM_UBICOM32) += ubicom32-rng.o
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -61,6 +61,40 @@ config CRYPTO_DEV_GEODE
- To compile this driver as a module, choose M here: the module
- will be called geode-aes.
-
-+config CRYPTO_UBICOM32
-+ bool "Ubicom32 Security Module"
-+ depends on UBICOM32
-+ help
-+ This is the ubicom32 hardware acceleration common code.
-+
-+config CRYPTO_AES_UBICOM32
-+ tristate "Ubicom32 AES implementation"
-+ depends on CRYPTO_UBICOM32
-+ select CRYPTO_ALGAPI
-+ help
-+ This is the ubicom32 hardware AES implementation.
-+
-+config CRYPTO_DES_UBICOM32
-+ tristate "Ubicom32 DES implementation"
-+ depends on CRYPTO_UBICOM32
-+ select CRYPTO_ALGAPI
-+ help
-+ This is the ubicom32 hardware DES and 3DES implementation.
-+
-+config CRYPTO_SHA1_UBICOM32
-+ tristate "Ubicom32 SHA1 implementation"
-+ depends on CRYPTO_UBICOM32
-+ select CRYPTO_ALGAPI
-+ help
-+ This is the ubicom32 hardware SHA1 implementation.
-+
-+config CRYPTO_MD5_UBICOM32
-+ tristate "Ubicom32 MD5 implementation"
-+ depends on CRYPTO_UBICOM32
-+ select CRYPTO_ALGAPI
-+ help
-+ This is the ubicom32 hardware MD5 implementation.
-+
- config ZCRYPT
- tristate "Support for PCI-attached cryptographic adapters"
- depends on S390
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -266,3 +266,10 @@ config GPIOMMC_CONFIGFS
- help
- This option automatically enables configfs support for gpiommc
- if configfs is available.
-+
-+config MMC_UBICOM32
-+ tristate "Ubicom32 MMC/SD host controller"
-+ depends on UBICOM32
-+ help
-+ This provides support for the SD/MMC hardware found on Ubicom32
-+ IP7K processors
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -30,4 +30,5 @@ obj-$(CONFIG_MMC_S3C) += s3cmci.o
- obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
- obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
- obj-$(CONFIG_GPIOMMC) += gpiommc.o
-+obj-$(CONFIG_MMC_UBICOM32) += ubicom32sd.o
-
---- a/drivers/mtd/devices/Kconfig
-+++ b/drivers/mtd/devices/Kconfig
-@@ -104,6 +104,31 @@ config M25PXX_USE_FAST_READ
- help
- This option enables FAST_READ access supported by ST M25Pxx.
-
-+config MTD_UBI32_NAND_SPI_ER
-+ tristate "UBI32_NAND SPI-ER support"
-+ help
-+ This driver supports the Micron MT29F1G01 SPI-ER NAND flash chip
-+ using the built in flash controller on the Ubicom32 architecture.
-+ Partial page writes are not supported by this driver.
-+
-+config MTD_NAND_SPI_ER
-+ tristate "NAND SPI-ER support"
-+ help
-+ This driver supports the Micron MT29F1G01 SPI-ER NAND flash chip
-+ using a generic SPI bus. Partial page writes are supported
-+ by this driver.
-+
-+config MTD_UBI32_M25P80
-+ tristate "Ubicom processor support for most SPI Flash chips (AT26DF, M25P, W25X, ...)"
-+ depends on UBICOM32
-+ default y
-+ help
-+ This enables access to most modern SPI flash chips, used for
-+ program and data storage. Series supported include Atmel AT26DF,
-+ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
-+ are supported as well. See the driver source for the current list,
-+ or to add other chips.
-+
- config MTD_SLRAM
- tristate "Uncached system RAM"
- help
---- a/drivers/mtd/devices/Makefile
-+++ b/drivers/mtd/devices/Makefile
-@@ -16,3 +16,6 @@ obj-$(CONFIG_MTD_LART) += lart.o
- obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
- obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
- obj-$(CONFIG_MTD_M25P80) += m25p80.o
-+obj-$(CONFIG_MTD_UBI32_M25P80) += ubi32-m25p80.o
-+obj-$(CONFIG_MTD_NAND_SPI_ER) += nand-spi-er.o
-+obj-$(CONFIG_MTD_UBI32_NAND_SPI_ER) += ubi32-nand-spi-er.o
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -2540,6 +2540,19 @@ config JME
- To compile this driver as a module, choose M here. The module
- will be called jme.
-
-+config UBICOM32_GMAC
-+ tristate "Ubicom Gigabit Ethernet support"
-+ depends on UBICOM32
-+ help
-+ Gigabit Ethernet support for ubicom32 processors
-+
-+config UBICOM32_OCM_FOR_SKB
-+ bool "USE OCM for SKB (EXPERIMENTAL)"
-+ depends on UBICOM32_GMAC
-+ default n
-+ help
-+ Allocate skb from OCM for Ethernet Receive when possible
-+
- endif # NETDEV_1000
-
- #
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -272,3 +272,5 @@ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
- obj-$(CONFIG_SFC) += sfc/
-
- obj-$(CONFIG_WIMAX) += wimax/
-+
-+obj-$(CONFIG_UBICOM32_GMAC) += ubi32-eth.o
---- a/drivers/net/usb/asix.c
-+++ b/drivers/net/usb/asix.c
-@@ -319,14 +319,33 @@ static int asix_rx_fixup(struct usbnet *
- /* get the packet length */
- size = (u16) (header & 0x0000ffff);
-
-- if ((skb->len) - ((size + 1) & 0xfffe) == 0)
-+ if ((skb->len) - ((size + 1) & 0xfffe) == 0) {
-+#ifndef HAVE_EFFICIENT_UNALIGNED_ACCESS
-+ if (((u32)packet & 0x02) == 0) {
-+ memmove(packet - 2, packet, size);
-+ skb->data -= 2;
-+ skb->tail -= 2;
-+ }
-+#endif
- return 2;
-+ }
-+
- if (size > ETH_FRAME_LEN) {
- deverr(dev,"asix_rx_fixup() Bad RX Length %d", size);
- return 0;
- }
- ax_skb = skb_clone(skb, GFP_ATOMIC);
- if (ax_skb) {
-+#ifndef HAVE_EFFICIENT_UNALIGNED_ACCESS
-+ if (((u32)packet & 0x02) == 0) {
-+ memmove(packet - 2, packet, size);
-+ ax_skb->data = packet - 2;
-+ } else {
-+ ax_skb->data = packet;
-+ }
-+#else
-+ ax_skb->data = packet;
-+#endif
- ax_skb->len = size;
- ax_skb->data = packet;
- skb_set_tail_pointer(ax_skb, size);
-@@ -1125,13 +1144,19 @@ static int ax88178_link_reset(struct usb
- mode = AX88178_MEDIUM_DEFAULT;
-
- if (ecmd.speed == SPEED_1000)
-+#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
- mode |= AX_MEDIUM_GM;
-+#else
-+ mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK;
-+#endif
- else if (ecmd.speed == SPEED_100)
- mode |= AX_MEDIUM_PS;
- else
- mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
-
-+#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
- mode |= AX_MEDIUM_ENCK;
-+#endif
-
- if (ecmd.duplex == DUPLEX_FULL)
- mode |= AX_MEDIUM_FD;
---- a/drivers/oprofile/cpu_buffer.c
-+++ b/drivers/oprofile/cpu_buffer.c
-@@ -328,10 +328,10 @@ static inline void oprofile_end_trace(st
- }
-
- static inline void
--__oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
-- unsigned long event, int is_kernel)
-+__oprofile_add_ext_sample_cpu(unsigned long pc, struct pt_regs * const regs,
-+ unsigned long event, int is_kernel, int cpu)
- {
-- struct oprofile_cpu_buffer *cpu_buf = &__get_cpu_var(cpu_buffer);
-+ struct oprofile_cpu_buffer *cpu_buf = &per_cpu(cpu_buffer, cpu);
- unsigned long backtrace = oprofile_backtrace_depth;
-
- /*
-@@ -353,7 +353,8 @@ __oprofile_add_ext_sample(unsigned long
- void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
- unsigned long event, int is_kernel)
- {
-- __oprofile_add_ext_sample(pc, regs, event, is_kernel);
-+ __oprofile_add_ext_sample_cpu(pc, regs, event,
-+ is_kernel, smp_processor_id());
- }
-
- void oprofile_add_sample(struct pt_regs * const regs, unsigned long event)
-@@ -361,7 +362,8 @@ void oprofile_add_sample(struct pt_regs
- int is_kernel = !user_mode(regs);
- unsigned long pc = profile_pc(regs);
-
-- __oprofile_add_ext_sample(pc, regs, event, is_kernel);
-+ __oprofile_add_ext_sample_cpu(pc, regs, event,
-+ is_kernel, smp_processor_id());
- }
-
- /*
---- a/drivers/pci/Makefile
-+++ b/drivers/pci/Makefile
-@@ -44,8 +44,8 @@ obj-$(CONFIG_PPC) += setup-bus.o
- obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
- obj-$(CONFIG_X86_VISWS) += setup-irq.o
- obj-$(CONFIG_MN10300) += setup-bus.o
-+obj-$(CONFIG_UBICOM32) += setup-bus.o setup-irq.o
-
--#
- # ACPI Related PCI FW Functions
- #
- obj-$(CONFIG_ACPI) += pci-acpi.o
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -871,6 +871,57 @@ config SERIAL_UARTLITE_CONSOLE
- console (the system console is the device which receives all kernel
- messages and warnings and which allows logins in single user mode).
-
-+config SERIAL_UBI32_UARTTIO
-+ tristate "Ubicom UARTTIO support"
-+ depends on UBICOM32=y
-+ select SERIAL_CORE
-+ default y
-+ help
-+ Add support for the Ubicom virtual peripherial serial interface.
-+
-+config SERIAL_UBI32_UARTTIO_NR_UARTS
-+ int "Maximum number of UARTTIO virtual serial ports"
-+ depends on SERIAL_UBI32_UARTTIO
-+ default "4"
-+ help
-+ Set this to the maximum number of serial ports you want the driver to support.
-+
-+config SERIAL_UBI32_UARTTIO_CONSOLE
-+ tristate "Ubicom UARTTIO console support"
-+ depends on SERIAL_UBI32_UARTTIO=y
-+ select SERIAL_CORE_CONSOLE
-+ default y
-+ help
-+ Add support for console on the Ubicom virtual peripherial serial interface.
-+
-+config SERIAL_UBI32_SERDES
-+ bool "Ubicom serial port support"
-+ depends on UBICOM32=y
-+ select SERIAL_CORE
-+ default y
-+ help
-+ Add support for the Ubicom serial interface.
-+
-+config SERIAL_UBI32_SERDES_CONSOLE
-+ bool "Ubicom serial console support"
-+ depends on SERIAL_UBI32_SERDES=y
-+ select SERIAL_CORE_CONSOLE
-+ default y
-+
-+config SERIAL_UBI32_MAILBOX
-+ bool "Ubicom mailbox support"
-+ depends on UBICOM32=y
-+ select SERIAL_CORE
-+ default n
-+ help
-+ Add support for the Ubicom mailbox interface.
-+
-+config SERIAL_UBI32_MAILBOX_CONSOLE
-+ bool "Ubicom mailbox console support"
-+ depends on SERIAL_UBI32_MAILBOX=y
-+ select SERIAL_CORE_CONSOLE
-+ default y
-+
- config SERIAL_SUNCORE
- bool
- depends on SPARC
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -77,3 +77,6 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIA
- obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
- obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
- obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
-+obj-$(CONFIG_SERIAL_UBI32_SERDES) += ubi32_serdes.o
-+obj-$(CONFIG_SERIAL_UBI32_UARTTIO) += ubi32_uarttio.o
-+obj-$(CONFIG_SERIAL_UBI32_MAILBOX) += ubi32_mailbox.o
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -196,6 +196,15 @@ config SPI_S3C24XX
- help
- SPI driver for Samsung S3C24XX series ARM SoCs
-
-+config SPI_UBICOM32_GPIO
-+ tristate "Ubicom32 SPI over GPIO"
-+ depends on SPI_MASTER && UBICOM32 && EXPERIMENTAL
-+ select SPI_BITBANG
-+ select HAS_DMA
-+ help
-+ SPI driver for the Ubicom32 architecture using
-+ GPIO lines to provide the SPI bus.
-+
- config SPI_S3C24XX_GPIO
- tristate "Samsung S3C24XX series SPI by GPIO"
- depends on ARCH_S3C2410 && EXPERIMENTAL
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_SPI_ORION) += orion_spi.o
- obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o
- obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
- obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
-+obj-$(CONFIG_SPI_UBICOM32_GPIO) += spi_ubicom32_gpio.o
- obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
- obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
- obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
---- a/drivers/uio/Kconfig
-+++ b/drivers/uio/Kconfig
-@@ -89,4 +89,12 @@ config UIO_SERCOS3
-
- If you compile this as a module, it will be called uio_sercos3.
-
-+config UIO_UBICOM32RING
-+ tristate "Ubicom32 Ring Buffer driver"
-+ default n
-+ help
-+ Userspace I/O interface for a Ubicom32 Ring Buffer.
-+
-+ If you compile this as a module, it will be called uio_ubicom32ring
-+
- endif
---- a/drivers/uio/Makefile
-+++ b/drivers/uio/Makefile
-@@ -5,3 +5,4 @@ obj-$(CONFIG_UIO_PDRV_GENIRQ) += uio_pdr
- obj-$(CONFIG_UIO_SMX) += uio_smx.o
- obj-$(CONFIG_UIO_AEC) += uio_aec.o
- obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o
-+obj-$(CONFIG_UIO_UBICOM32RING) += uio_ubicom32ring.o
---- a/drivers/usb/gadget/epautoconf.c
-+++ b/drivers/usb/gadget/epautoconf.c
-@@ -154,6 +154,10 @@ ep_matches (
- /* configure your hardware with enough buffering!! */
- }
- break;
-+
-+ case USB_ENDPOINT_XFER_BULK:
-+ if ((gadget->is_dualspeed) && (ep->maxpacket < 512))
-+ return 0;
- }
-
- /* MATCH!! */
---- a/drivers/usb/Kconfig
-+++ b/drivers/usb/Kconfig
-@@ -22,6 +22,7 @@ config USB_ARCH_HAS_HCD
- default y if PCMCIA && !M32R # sl811_cs
- default y if ARM # SL-811
- default y if SUPERH # r8a66597-hcd
-+ default y if UBICOM32 # Ubicom's onchip USB Duial role controller
- default PCI
-
- # many non-PCI SOC chips embed OHCI
---- a/drivers/usb/musb/Kconfig
-+++ b/drivers/usb/musb/Kconfig
-@@ -12,7 +12,7 @@ config USB_MUSB_HDRC
- depends on !SUPERH
- select TWL4030_USB if MACH_OMAP_3430SDP
- select USB_OTG_UTILS
-- tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
-+ tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, Ubicom, ...)'
- help
- Say Y here if your system has a dual role high speed USB
- controller based on the Mentor Graphics silicon IP. Then
---- a/drivers/usb/musb/Makefile
-+++ b/drivers/usb/musb/Makefile
-@@ -30,6 +30,10 @@ ifeq ($(CONFIG_BF52x),y)
- musb_hdrc-objs += blackfin.o
- endif
-
-+ifeq ($(CONFIG_UBICOM32), y)
-+ musb_hdrc-objs += ubi32_usb.o
-+endif
-+
- ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
- musb_hdrc-objs += musb_gadget_ep0.o musb_gadget.o
- endif
---- a/drivers/usb/musb/musb_core.c
-+++ b/drivers/usb/musb/musb_core.c
-@@ -105,6 +105,13 @@
- #include <asm/mach-types.h>
- #endif
-
-+#ifdef CONFIG_UBICOM32
-+#include <asm/ip5000.h>
-+#include <asm/ubicom32-tio.h>
-+extern void ubi32_usb_init(void);
-+extern void ubi32_usb_int_clr(void);
-+#endif
-+
- #include "musb_core.h"
-
-
-@@ -147,8 +154,37 @@ static inline struct musb *dev_to_musb(s
- }
-
- /*-------------------------------------------------------------------------*/
-+#if defined(CONFIG_UBICOM32)
-+
-+/*
-+ * Load an endpoint's FIFO
-+ */
-+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 wCount, const u8 *pSource)
-+{
-+ void __iomem *fifo = hw_ep->fifo;
-+
-+ prefetch((u8 *)pSource);
-+
-+ DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
-+ 'T', hw_ep->epnum, fifo, wCount, pSource);
-+
-+ usb_tio_write_fifo((u32)fifo, (u32)pSource, wCount);
-+
-+}
-+
-+/*
-+ * Unload an endpoint's FIFO
-+ */
-+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 wCount, u8 *pDest)
-+{
-+
-+ void __iomem *fifo = hw_ep->fifo;
-+ DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
-+ 'R', hw_ep->epnum, fifo, wCount, pDest);
-+ usb_tio_read_fifo((u32)fifo, (u32)pDest, wCount);
-+}
-
--#if !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
-+#elif !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
-
- /*
- * Load an endpoint's FIFO
-@@ -227,8 +263,7 @@ void musb_read_fifo(struct musb_hw_ep *h
- readsb(fifo, dst, len);
- }
- }
--
--#endif /* normal PIO */
-+#endif /* !T6010 && !BLACKFIN */
-
-
- /*-------------------------------------------------------------------------*/
-@@ -874,12 +909,19 @@ void musb_start(struct musb *musb)
- musb_writeb(regs, MUSB_TESTMODE, 0);
-
- /* put into basic highspeed mode and start session */
-+#ifndef CONFIG_UBICOM32
- musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
- | MUSB_POWER_SOFTCONN
- | MUSB_POWER_HSENAB
- /* ENSUSPEND wedges tusb */
- /* | MUSB_POWER_ENSUSPEND */
- );
-+#else
-+ musb_writeb(regs, MUSB_POWER, MUSB_POWER_HSENAB
-+ /* ENSUSPEND wedges tusb */
-+ /* | MUSB_POWER_ENSUSPEND */
-+ );
-+#endif
-
- musb->is_active = 0;
- devctl = musb_readb(regs, MUSB_DEVCTL);
-@@ -1081,6 +1123,7 @@ static struct fifo_cfg __initdata mode_4
- };
-
-
-+#ifndef CONFIG_UBICOM32
- /*
- * configure a fifo; for non-shared endpoints, this may be called
- * once for a tx fifo and once for an rx fifo.
-@@ -1240,7 +1283,7 @@ static int __init ep_config_from_table(s
-
- return 0;
- }
--
-+#endif /* CONFIG_UBICOM32 */
-
- /*
- * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
-@@ -1256,6 +1299,11 @@ static int __init ep_config_from_hw(stru
- DBG(2, "<== static silicon ep config\n");
-
- /* FIXME pick up ep0 maxpacket size */
-+#ifdef CONFIG_UBICOM32
-+ /* set ep0 to shared_fifo, otherwise urb will be put to out_qh but ep0_irq try to get the urb from in_qh*/
-+ hw_ep = musb->endpoints;
-+ hw_ep->is_shared_fifo = true;
-+#endif
-
- for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
- musb_ep_select(mbase, epnum);
-@@ -1276,14 +1324,27 @@ static int __init ep_config_from_hw(stru
- /* REVISIT: this algorithm is lazy, we should at least
- * try to pick a double buffered endpoint.
- */
-+#ifndef CONFIG_UBICOM32
- if (musb->bulk_ep)
- continue;
- musb->bulk_ep = hw_ep;
-+#else
-+ if ((musb->bulk_ep_in) && (musb->bulk_ep_out))
-+ continue;
-+ /* Save theEP with 1024 Bytes FIFO for ISO */
-+ if(hw_ep->max_packet_sz_tx == 512) {
-+ if (!musb->bulk_ep_in) {
-+ musb->bulk_ep_in = hw_ep;
-+ } else if (!musb->bulk_ep_out) {
-+ musb->bulk_ep_out = hw_ep;
-+ }
-+ }
-+#endif /* CONFIG_UBICOM32 */
- #endif
- }
-
- #ifdef CONFIG_USB_MUSB_HDRC_HCD
-- if (!musb->bulk_ep) {
-+ if ((!musb->bulk_ep_in) || (!musb->bulk_ep_out)) {
- pr_debug("%s: missing bulk\n", musb_driver_name);
- return -EINVAL;
- }
-@@ -1393,12 +1454,16 @@ static int __init musb_core_init(u16 mus
- musb->epmask = 1;
-
- if (reg & MUSB_CONFIGDATA_DYNFIFO) {
-+#ifndef CONFIG_UBICOM32
- if (musb->config->dyn_fifo)
- status = ep_config_from_table(musb);
-- else {
-+ else
-+#endif
-+ {
- ERR("reconfigure software for Dynamic FIFOs\n");
- status = -ENODEV;
- }
-+
- } else {
- if (!musb->config->dyn_fifo)
- status = ep_config_from_hw(musb);
-@@ -1462,8 +1527,8 @@ static int __init musb_core_init(u16 mus
-
- /*-------------------------------------------------------------------------*/
-
--#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
--
-+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_UBICOM32)
-+static u32_t musb_int_count = 0;
- static irqreturn_t generic_interrupt(int irq, void *__hci)
- {
- unsigned long flags;
-@@ -1472,10 +1537,17 @@ static irqreturn_t generic_interrupt(int
-
- spin_lock_irqsave(&musb->lock, flags);
-
-+#ifndef CONFIG_UBICOM32
- musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
- musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
- musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
-+#else
-+ musb_read_int_status(&musb->int_usb, &musb->int_tx, &musb->int_rx);
-+ //ubi32_usb_int_clr();
-+ musb_int_count++;
-+#endif
-
-+ DBG(4, "usb %x, tx %x, rx %x", musb->int_usb, musb->int_tx, musb->int_rx);
- if (musb->int_usb || musb->int_tx || musb->int_rx)
- retval = musb_interrupt(musb);
-
-@@ -2210,6 +2282,10 @@ static struct platform_driver musb_drive
-
- static int __init musb_init(void)
- {
-+#ifdef CONFIG_UBICOM32
-+ ubi32_usb_init();
-+#endif
-+
- #ifdef CONFIG_USB_MUSB_HDRC_HCD
- if (usb_disabled())
- return 0;
---- a/drivers/usb/musb/musb_core.h
-+++ b/drivers/usb/musb/musb_core.h
-@@ -326,7 +326,12 @@ struct musb {
- * queue until it completes or NAKs too much; then we try the next
- * endpoint.
- */
-+#ifdef CONFIG_UBICOM32
-+ struct musb_hw_ep *bulk_ep_in;
-+ struct musb_hw_ep *bulk_ep_out;
-+#else
- struct musb_hw_ep *bulk_ep;
-+#endif
-
- struct list_head control; /* of musb_qh */
- struct list_head in_bulk; /* of musb_qh */
---- a/drivers/usb/musb/musb_gadget.c
-+++ b/drivers/usb/musb/musb_gadget.c
-@@ -432,7 +432,7 @@ void musb_g_tx(struct musb *musb, u8 epn
- * probably rates reporting as a host error
- */
- if (csr & MUSB_TXCSR_P_SENTSTALL) {
-- csr |= MUSB_TXCSR_P_WZC_BITS;
-+ csr &= ~(MUSB_TXCSR_P_WZC_BITS);
- csr &= ~MUSB_TXCSR_P_SENTSTALL;
- musb_writew(epio, MUSB_TXCSR, csr);
- if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
-@@ -448,7 +448,7 @@ void musb_g_tx(struct musb *musb, u8 epn
-
- if (csr & MUSB_TXCSR_P_UNDERRUN) {
- /* we NAKed, no big deal ... little reason to care */
-- csr |= MUSB_TXCSR_P_WZC_BITS;
-+ csr &= ~(MUSB_TXCSR_P_WZC_BITS);
- csr &= ~(MUSB_TXCSR_P_UNDERRUN
- | MUSB_TXCSR_TXPKTRDY);
- musb_writew(epio, MUSB_TXCSR, csr);
-@@ -584,10 +584,16 @@ static void rxstate(struct musb *musb, s
- u16 csr = 0;
- const u8 epnum = req->epnum;
- struct usb_request *request = &req->request;
-- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
-+ struct musb_ep *musb_ep = NULL;
- void __iomem *epio = musb->endpoints[epnum].regs;
-- unsigned fifo_count = 0;
-- u16 len = musb_ep->packet_sz;
-+ u16 fifo_count = 0;
-+ u16 len = 0;
-+
-+ if (musb->endpoints[epnum].is_shared_fifo)
-+ musb_ep = &musb->endpoints[epnum].ep_in;
-+ else
-+ musb_ep = &musb->endpoints[epnum].ep_out;
-+ len = musb_ep->packet_sz;
-
- csr = musb_readw(epio, MUSB_RXCSR);
-
-@@ -726,7 +732,7 @@ static void rxstate(struct musb *musb, s
- */
-
- /* ack the read! */
-- csr |= MUSB_RXCSR_P_WZC_BITS;
-+ csr &= ~MUSB_RXCSR_P_WZC_BITS;
- csr &= ~MUSB_RXCSR_RXPKTRDY;
- musb_writew(epio, MUSB_RXCSR, csr);
- }
-@@ -745,10 +751,15 @@ void musb_g_rx(struct musb *musb, u8 epn
- u16 csr;
- struct usb_request *request;
- void __iomem *mbase = musb->mregs;
-- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
-+ struct musb_ep *musb_ep = NULL;
- void __iomem *epio = musb->endpoints[epnum].regs;
- struct dma_channel *dma;
-
-+ if (musb->endpoints[epnum].is_shared_fifo)
-+ musb_ep = &musb->endpoints[epnum].ep_in;
-+ else
-+ musb_ep = &musb->endpoints[epnum].ep_out;
-+
- musb_ep_select(mbase, epnum);
-
- request = next_request(musb_ep);
-@@ -1769,7 +1780,9 @@ int usb_gadget_register_driver(struct us
- }
- }
- }
--
-+#ifndef CONFIG_USB_MUSB_OTG
-+ musb_pullup(musb, 1);
-+#endif
- return retval;
- }
- EXPORT_SYMBOL(usb_gadget_register_driver);
---- a/drivers/usb/musb/musb_gadget_ep0.c
-+++ b/drivers/usb/musb/musb_gadget_ep0.c
-@@ -240,14 +240,14 @@ __acquires(musb->lock)
- case USB_REQ_SET_ADDRESS:
- /* change it after the status stage */
- musb->set_address = true;
-- musb->address = (u8) (ctrlrequest->wValue & 0x7f);
-+ musb->address = (u8) (le16_to_cpu(ctrlrequest->wValue) & 0x7f);
- handled = 1;
- break;
-
- case USB_REQ_CLEAR_FEATURE:
- switch (recip) {
- case USB_RECIP_DEVICE:
-- if (ctrlrequest->wValue
-+ if (le16_to_cpu(ctrlrequest->wValue)
- != USB_DEVICE_REMOTE_WAKEUP)
- break;
- musb->may_wakeup = 0;
-@@ -261,8 +261,8 @@ __acquires(musb->lock)
-
- if (num == 0
- || num >= MUSB_C_NUM_EPS
-- || ctrlrequest->wValue
-- != USB_ENDPOINT_HALT)
-+ || le16_to_cpu(ctrlrequest->wValue
-+ != USB_ENDPOINT_HALT))
- break;
-
- if (ctrlrequest->wIndex & USB_DIR_IN)
-@@ -292,7 +292,7 @@ __acquires(musb->lock)
- switch (recip) {
- case USB_RECIP_DEVICE:
- handled = 1;
-- switch (ctrlrequest->wValue) {
-+ switch (le16_to_cpu(ctrlrequest->wValue)) {
- case USB_DEVICE_REMOTE_WAKEUP:
- musb->may_wakeup = 1;
- break;
-@@ -374,8 +374,8 @@ stall:
-
- if (epnum == 0
- || epnum >= MUSB_C_NUM_EPS
-- || ctrlrequest->wValue
-- != USB_ENDPOINT_HALT)
-+ || le16_to_cpu(ctrlrequest->wValue
-+ != USB_ENDPOINT_HALT))
- break;
-
- ep = musb->endpoints + epnum;
---- a/drivers/usb/musb/musb_host.c
-+++ b/drivers/usb/musb/musb_host.c
-@@ -160,7 +160,11 @@ static inline void musb_h_tx_start(struc
- /* NOTE: no locks here; caller should lock and select EP */
- if (ep->epnum) {
- txcsr = musb_readw(ep->regs, MUSB_TXCSR);
-+#ifndef CONFIG_UBICOM32
- txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
-+#else
-+ txcsr |= (MUSB_TXCSR_TXPKTRDY & (~MUSB_TXCSR_H_WZC_BITS));
-+#endif
- musb_writew(ep->regs, MUSB_TXCSR, txcsr);
- } else {
- txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY;
-@@ -223,6 +227,8 @@ musb_start_urb(struct musb *musb, int is
- break;
- default: /* bulk, interrupt */
- /* actual_length may be nonzero on retry paths */
-+ if (urb->actual_length)
-+ DBG(3 ,"musb_start_urb: URB %p retried, len: %d\n", urb, urb->actual_length);
- buf = urb->transfer_buffer + urb->actual_length;
- len = urb->transfer_buffer_length - urb->actual_length;
- }
-@@ -342,13 +348,13 @@ musb_save_toggle(struct musb_hw_ep *ep,
- if (!is_in) {
- csr = musb_readw(epio, MUSB_TXCSR);
- usb_settoggle(udev, qh->epnum, 1,
-- (csr & MUSB_TXCSR_H_DATATOGGLE)
-- ? 1 : 0);
-+ ((csr & MUSB_TXCSR_H_DATATOGGLE)
-+ ? 1 : 0));
- } else {
- csr = musb_readw(epio, MUSB_RXCSR);
- usb_settoggle(udev, qh->epnum, 0,
-- (csr & MUSB_RXCSR_H_DATATOGGLE)
-- ? 1 : 0);
-+ ((csr & MUSB_RXCSR_H_DATATOGGLE)
-+ ? 1 : 0));
- }
- }
-
-@@ -556,7 +562,11 @@ musb_host_packet_rx(struct musb *musb, s
- musb_read_fifo(hw_ep, length, buf);
-
- csr = musb_readw(epio, MUSB_RXCSR);
-+#ifndef CONFIG_UBICOM32
- csr |= MUSB_RXCSR_H_WZC_BITS;
-+#else
-+ csr &= ~MUSB_RXCSR_H_WZC_BITS;
-+#endif
- if (unlikely(do_flush))
- musb_h_flush_rxfifo(hw_ep, csr);
- else {
-@@ -590,6 +600,7 @@ musb_rx_reinit(struct musb *musb, struct
-
- /* if programmed for Tx, put it in RX mode */
- if (ep->is_shared_fifo) {
-+#ifndef CONFIG_UBICOM32
- csr = musb_readw(ep->regs, MUSB_TXCSR);
- if (csr & MUSB_TXCSR_MODE) {
- musb_h_tx_flush_fifo(ep);
-@@ -604,7 +615,18 @@ musb_rx_reinit(struct musb *musb, struct
- */
- if (csr & MUSB_TXCSR_DMAMODE)
- musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE);
-+
-+#else
-+ /* clear mode (and everything else) to enable Rx */
- musb_writew(ep->regs, MUSB_TXCSR, 0);
-+ /* scrub all previous state, clearing toggle */
-+ csr = musb_readw(ep->regs, MUSB_RXCSR);
-+ if (csr & MUSB_RXCSR_RXPKTRDY)
-+ WARNING("rx%d, packet/%d ready?\n", ep->epnum,
-+ musb_readw(ep->regs, MUSB_RXCOUNT));
-+
-+ musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
-+#endif
-
- /* scrub all previous state, clearing toggle */
- } else {
-@@ -1138,8 +1160,18 @@ void musb_host_tx(struct musb *musb, u8
- void __iomem *mbase = musb->mregs;
- struct dma_channel *dma;
-
-+#ifdef CONFIG_UBICOM32
-+ if (hw_ep->is_shared_fifo) {
-+ qh = hw_ep->in_qh;
-+ }
-+#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS
-+ printk(KERN_DEBUG "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
-+ dma ? ", dma" : "");
-+#endif
-+#endif
- urb = next_urb(qh);
-
-+
- musb_ep_select(mbase, epnum);
- tx_csr = musb_readw(epio, MUSB_TXCSR);
-
-@@ -1180,9 +1212,14 @@ void musb_host_tx(struct musb *musb, u8
- * we have a candidate... NAKing is *NOT* an error
- */
- musb_ep_select(mbase, epnum);
-+#ifndef CONFIG_UBICOM32
- musb_writew(epio, MUSB_TXCSR,
- MUSB_TXCSR_H_WZC_BITS
- | MUSB_TXCSR_TXPKTRDY);
-+#else
-+ musb_writew(epio, MUSB_TXCSR,
-+ MUSB_TXCSR_TXPKTRDY);
-+#endif
- return;
- }
-
-@@ -1353,8 +1390,14 @@ void musb_host_tx(struct musb *musb, u8
- qh->segsize = length;
-
- musb_ep_select(mbase, epnum);
-+#ifndef CONFIG_UBICOM32
-+ musb_writew(epio, MUSB_TXCSR,
-+ MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
-+#else
- musb_writew(epio, MUSB_TXCSR,
-- MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
-+ MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY);
-+#endif
-+
- }
-
-
-@@ -1414,7 +1457,11 @@ static void musb_bulk_rx_nak_timeout(str
-
- /* clear nak timeout bit */
- rx_csr = musb_readw(epio, MUSB_RXCSR);
-+#ifndef CONFIG_UBICOM32
- rx_csr |= MUSB_RXCSR_H_WZC_BITS;
-+#else
-+ rx_csr &= ~MUSB_RXCSR_H_WZC_BITS;
-+#endif
- rx_csr &= ~MUSB_RXCSR_DATAERROR;
- musb_writew(epio, MUSB_RXCSR, rx_csr);
-
-@@ -1483,6 +1530,13 @@ void musb_host_rx(struct musb *musb, u8
-
- pipe = urb->pipe;
-
-+#ifdef CONFIG_UBICOM32
-+#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS
-+ printk(KERN_DEBUG "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
-+ xfer_len, dma ? ", dma" : "");
-+#endif
-+#endif
-+
- DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
- epnum, rx_csr, urb->actual_length,
- dma ? dma->actual_len : 0);
-@@ -1521,8 +1575,15 @@ void musb_host_rx(struct musb *musb, u8
- return;
- }
- musb_ep_select(mbase, epnum);
-+#ifndef CONFIG_UBICOM32
- rx_csr |= MUSB_RXCSR_H_WZC_BITS;
- rx_csr &= ~MUSB_RXCSR_DATAERROR;
-+#else
-+ /* NEED TO EVALUATE CHANGE */
-+ rx_csr &= ~MUSB_RXCSR_H_WZC_BITS;
-+ rx_csr &= ~MUSB_RXCSR_DATAERROR;
-+// musb_writew(epio, MUSB_RXCSR, (~(MUSB_RXCSR_H_WZC_BITS))| MUSB_RXCSR_H_REQPKT);
-+#endif
- musb_writew(epio, MUSB_RXCSR, rx_csr);
-
- goto finish;
-@@ -1579,8 +1640,13 @@ void musb_host_rx(struct musb *musb, u8
- rx_csr &= ~MUSB_RXCSR_H_REQPKT;
-
- musb_ep_select(mbase, epnum);
-+#ifndef CONFIG_UBICOM32
- musb_writew(epio, MUSB_RXCSR,
- MUSB_RXCSR_H_WZC_BITS | rx_csr);
-+#else
-+ musb_writew(epio, MUSB_RXCSR,
-+ (~MUSB_RXCSR_H_WZC_BITS) & rx_csr);
-+#endif
- }
- #endif
- if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) {
-@@ -1610,7 +1676,7 @@ void musb_host_rx(struct musb *musb, u8
- else
- done = false;
-
-- } else {
-+ } else {
- /* done if urb buffer is full or short packet is recd */
- done = (urb->actual_length + xfer_len >=
- urb->transfer_buffer_length
-@@ -1823,7 +1889,11 @@ static int musb_schedule(
- } else if (hw_ep->out_qh != NULL)
- continue;
-
-+#ifndef CONFIG_UBICOM32
- if (hw_ep == musb->bulk_ep)
-+#else
-+ if ((hw_ep == musb->bulk_ep_in) || (hw_ep == musb->bulk_ep_out)) /* Ubicom */
-+#endif
- continue;
-
- if (is_in)
-@@ -1836,7 +1906,14 @@ static int musb_schedule(
- best_end = epnum;
- }
- }
-+
-+#ifdef CONFIG_UBICOM32
-+ if (((best_diff >= qh->maxpacket)) && ((qh->type == USB_ENDPOINT_XFER_BULK) && (!is_in)))
-+ best_end = -1;
-+#endif
-+
- /* use bulk reserved ep1 if no other ep is free */
-+#ifndef CONFIG_UBICOM32
- if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
- hw_ep = musb->bulk_ep;
- if (is_in)
-@@ -1858,6 +1935,22 @@ static int musb_schedule(
- } else if (best_end < 0) {
- return -ENOSPC;
- }
-+#else
-+ if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
-+ /* hw_ep = musb->bulk_ep; */
-+ if (is_in) {
-+ head = &musb->in_bulk;
-+ hw_ep = musb->bulk_ep_in; /* UBICOM */
-+ }
-+ else {
-+ head = &musb->out_bulk;
-+ hw_ep = musb->bulk_ep_out; /* UBICOM */
-+ }
-+ goto success;
-+ } else if (best_end < 0) {
-+ return -ENOSPC;
-+ }
-+#endif
-
- idle = 1;
- qh->mux = 0;
-@@ -1869,6 +1962,13 @@ success:
- list_add_tail(&qh->ring, head);
- qh->mux = 1;
- }
-+ /*
-+ * It's not make sense to set NAK timeout when qh->mux = 0,
-+ * There is nothing else to schedule
-+ */
-+ if ((qh->type == USB_ENDPOINT_XFER_BULK) && (qh->mux == 0))
-+ qh->intv_reg = 0;
-+
- qh->hw_ep = hw_ep;
- qh->hep->hcpriv = qh;
- if (idle)
-@@ -1975,6 +2075,15 @@ static int musb_urb_enqueue(
- /* ISO always uses logarithmic encoding */
- interval = min_t(u8, epd->bInterval, 16);
- break;
-+#ifdef COMFIG_UBICOM32
-+ case USB_ENDPOINT_XFER_BULK:
-+ if (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
-+ interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16: 2;
-+ else
-+ interval = 0;
-+ break;
-+#endif
-+
- default:
- /* REVISIT we actually want to use NAK limits, hinting to the
- * transfer scheduling logic to try some other qh, e.g. try
---- a/drivers/usb/musb/musb_io.h
-+++ b/drivers/usb/musb/musb_io.h
-@@ -58,6 +58,7 @@ static inline void writesb(const void __
-
- #ifndef CONFIG_BLACKFIN
-
-+#ifndef CONFIG_UBICOM32
- /* NOTE: these offsets are all in bytes */
-
- static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
-@@ -72,7 +73,37 @@ static inline void musb_writew(void __io
-
- static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
- { __raw_writel(data, addr + offset); }
-+#else
-+#include <asm/ubicom32-tio.h>
-+static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
-+{
-+ u16 data;
-+ usb_tio_read_u16((u32)(addr + offset), &data);
-+ return data;
-+}
-
-+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
-+{
-+ u8 data;
-+ usb_tio_read_u8((u32)(addr + offset), &data);
-+ return data;
-+}
-+
-+static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
-+{
-+ usb_tio_write_u16((u32)(addr + offset), data);
-+}
-+
-+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
-+{
-+ usb_tio_write_u8((u32)(addr + offset), data);
-+}
-+
-+static inline void musb_read_int_status(u8_t *int_usb, u16_t *int_tx, u16_t *int_rx)
-+{
-+ return usb_tio_read_int_status(int_usb, int_tx, int_rx);
-+}
-+#endif /* CONFIG_UBICOM32 */
-
- #ifdef CONFIG_USB_TUSB6010
-
-@@ -106,7 +137,7 @@ static inline void musb_writeb(void __io
- __raw_writew(tmp, addr + (offset & ~1));
- }
-
--#else
-+#elif !defined(CONFIG_UBICOM32)
-
- static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
- { return __raw_readb(addr + offset); }
---- a/drivers/usb/musb/musb_regs.h
-+++ b/drivers/usb/musb/musb_regs.h
-@@ -167,6 +167,7 @@
- (MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
- | MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
-
-+
- /* RXCSR in Peripheral and Host mode */
- #define MUSB_RXCSR_AUTOCLEAR 0x8000
- #define MUSB_RXCSR_DMAENAB 0x2000
---- a/drivers/video/backlight/Kconfig
-+++ b/drivers/video/backlight/Kconfig
-@@ -93,6 +93,63 @@ config LCD_HP700
- If you have an HP Jornada 700 series handheld (710/720/728)
- say Y to enable LCD control driver.
-
-+config LCD_UBICOM32POWER
-+ tristate "Ubicom LCD power Driver"
-+ depends on LCD_CLASS_DEVICE && UBICOM32
-+ default n
-+ help
-+ If you have a Ubicom32 based system with an LCD panel that requires
-+ power control, say Y to enable the power control driver for it.
-+
-+config LCD_UBICOM32
-+ tristate "Ubicom Backlight Driver"
-+ depends on LCD_CLASS_DEVICE && UBICOM32
-+ default n
-+ help
-+ This driver takes care of initialization of LCD panels with
-+ built in controllers.
-+
-+menu "Ubicom32 LCD Panel Support"
-+ depends on UBICOM32 && LCD_UBICOM32
-+
-+config LCD_UBICOM32_TFT2N0369E_P
-+ bool "TFT2N0369E (Portrait)"
-+ default n
-+ help
-+ Support for TFT2N0369 in portrait mode
-+
-+config LCD_UBICOM32_TFT2N0369E_L
-+ bool "TFT2N0369E (Landscape)"
-+ default n
-+ help
-+ Support for TFT2N0369 in landscape mode
-+
-+config LCD_UBICOM32_CFAF240320KTTS
-+ bool "CFAF240320KTTS"
-+ default n
-+ help
-+ Support for CFAF240320KTTS
-+
-+config LCD_UBICOM32_CFAF240320KTTS_180
-+ bool "CFAF240320KTTS (180 rotation)"
-+ default n
-+ help
-+ Support for CFAF240320KTTS rotated 180 degrees
-+
-+config LCD_UBICOM32_CFAF240320D
-+ bool "CFAF240320D"
-+ default n
-+ help
-+ Support for CFAF240320D
-+
-+config LCD_UBICOM32_CFAF320240F
-+ bool "CFAF320240F"
-+ default n
-+ help
-+ Support for CFAF320240F
-+
-+endmenu
-+
- #
- # Backlight
- #
-@@ -229,3 +286,11 @@ config BACKLIGHT_SAHARA
- help
- If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
- backlight driver.
-+
-+config BACKLIGHT_UBICOM32
-+ tristate "Ubicom Backlight Driver"
-+ depends on BACKLIGHT_CLASS_DEVICE && UBICOM32
-+ default n
-+ help
-+ If you have a Ubicom32 based system with a backlight say Y to enable the
-+ backlight driver.
---- a/drivers/video/backlight/Makefile
-+++ b/drivers/video/backlight/Makefile
-@@ -9,6 +9,9 @@ obj-$(CONFIG_LCD_PLATFORM) += platfor
- obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
- obj-$(CONFIG_LCD_TDO24M) += tdo24m.o
- obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
-+obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
-+obj-$(CONFIG_LCD_UBICOM32POWER) += ubicom32lcdpower.o
-+obj-$(CONFIG_LCD_UBICOM32) += ubicom32lcd.o
-
- obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
- obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
-@@ -24,4 +27,4 @@ obj-$(CONFIG_BACKLIGHT_DA903X) += da903x
- obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
- obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
- obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
--
-+obj-$(CONFIG_BACKLIGHT_UBICOM32) += ubicom32bl.o
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -609,6 +609,50 @@ config FB_BFIN_T350MCQB
- This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
- It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
-
-+config FB_UBICOM32
-+ tristate "Ubicom32 Frame Buffer driver"
-+ depends on FB && UBICOM32
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ select FONT_6x11 if FRAMEBUFFER_CONSOLE
-+ help
-+ This is the framebuffer device driver for the Ubicom32 architecture.
-+ You can configure video memory by using kernel command line parameters, for example:
-+ video=ubicomfb:vram_size=512,init_value=0xffff
-+
-+config FB_UBICOM32_PLIO80
-+ tristate "Ubicom32 80 Bus PLIO Frame Buffer driver"
-+ depends on FB && UBICOM32
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ select FONT_6x11 if FRAMEBUFFER_CONSOLE
-+ select UBICOM32_PLIO
-+ help
-+ This is a framebuffer device driver for the Ubicom32 architecture.
-+ You can configure the xres, yres and vram size (in kilobytes) by using
-+ kernel command line parameters, for example:
-+ video=ubicom32vfb:xres=320,yres=240,vram_size=512
-+
-+config FB_UBICOM32_VIRTUAL
-+ tristate "Ubicom32 Virtual Frame Buffer driver"
-+ depends on FB && UBICOM32
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ select FONT_6x11 if FRAMEBUFFER_CONSOLE
-+ help
-+ This is a virtual framebuffer device driver for the Ubicom32 architecture.
-+ You can configure the xres, yres and vram size (in kilobytes) by using
-+ kernel command line parameters, for example:
-+ video=ubicom32vfb:xres=320,yres=240,vram_size=512
-+
-+config FB_UBICOM32_VIRTUAL_NOAUTO
-+ bool "Do not automatically load"
-+ depends on FB_UBICOM32_VIRTUAL
-+ help
-+ Select this option to prevent the VFB from automatically loading at boot.
-
- config FB_STI
- tristate "HP STI frame buffer device support"
---- a/drivers/video/Makefile
-+++ b/drivers/video/Makefile
-@@ -136,6 +136,10 @@ obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-
- obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
- obj-$(CONFIG_FB_MX3) += mx3fb.o
-
-+obj-$(CONFIG_FB_UBICOM32) += ubicom32fb.o
-+obj-$(CONFIG_FB_UBICOM32_PLIO80) += ubicom32plio80.o
-+obj-$(CONFIG_FB_UBICOM32_VIRTUAL) += ubicom32vfb.o
-+
- # the test framebuffer is last
- obj-$(CONFIG_FB_VIRTUAL) += vfb.o
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -887,6 +887,19 @@ config WATCHDOG_RIO
- machines. The watchdog timeout period is normally one minute but
- can be changed with a boot-time parameter.
-
-+# Ubicom32
-+
-+config UBI32_WDT
-+ tristate "Ubicom32 Hardware Watchdog support"
-+ depends on UBICOM32
-+ ---help---
-+ If you say yes here you will get support for the Ubicom32 On-Chip
-+ Watchdog Timer. If you have one of these processors and wish to
-+ have watchdog support enabled, say Y, otherwise say N.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called ubi32_wdt.
-+
- # XTENSA Architecture
-
- #
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -131,6 +131,9 @@ obj-$(CONFIG_SH_WDT) += shwdt.o
- obj-$(CONFIG_WATCHDOG_RIO) += riowd.o
- obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o
-
-+# Ubicom32 Architecture
-+obj-$(CONFIG_UBI32_WDT) += ubi32_wdt.o
-+
- # XTENSA Architecture
-
- # Architecture Independant
---- a/fs/binfmt_flat.c
-+++ b/fs/binfmt_flat.c
-@@ -67,6 +67,11 @@
- #define FLAT_DATA_ALIGN (sizeof(void *))
- #endif
-
-+#ifndef ARCH_FLAT_ALIGN
-+#undef FLAT_DATA_ALIGN
-+#define FLAT_DATA_ALIGN ARCH_FLAT_ALIGN
-+#endif
-+
- #define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
- #define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */
-
-@@ -436,6 +441,7 @@ static int load_flat_file(struct linux_b
- loff_t fpos;
- unsigned long start_code, end_code;
- int ret;
-+ int flush_happened = 0;
-
- hdr = ((struct flat_hdr *) bprm->buf); /* exec-header */
- inode = bprm->file->f_path.dentry->d_inode;
-@@ -521,6 +527,7 @@ static int load_flat_file(struct linux_b
-
- /* OK, This is the point of no return */
- set_personality(PER_LINUX_32BIT);
-+ flush_happened = 1;
- }
-
- /*
-@@ -535,6 +542,12 @@ static int load_flat_file(struct linux_b
- * it all together.
- */
- if ((flags & (FLAT_FLAG_RAM|FLAT_FLAG_GZIP)) == 0) {
-+
-+#ifdef ARCH_FLAT_ALIGN_TEXT
-+ printk("Unable to mmap rom with ARCH alignment requirements\n");
-+ ret = -ENOEXEC;
-+ goto err;
-+#endif
- /*
- * this should give us a ROM ptr, but if it doesn't we don't
- * really care
-@@ -553,7 +566,7 @@ static int load_flat_file(struct linux_b
- goto err;
- }
-
-- len = data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
-+ len = data_len + extra + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), FLAT_DATA_ALIGN);
- len = PAGE_ALIGN(len);
- down_write(¤t->mm->mmap_sem);
- realdatastart = do_mmap(0, 0, len,
-@@ -572,6 +585,7 @@ static int load_flat_file(struct linux_b
- datapos = ALIGN(realdatastart +
- MAX_SHARED_LIBS * sizeof(unsigned long),
- FLAT_DATA_ALIGN);
-+ //datapos = realdatastart + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN);
-
- DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n",
- (int)(data_len + bss_len + stack_len), (int)datapos);
-@@ -600,7 +614,11 @@ static int load_flat_file(struct linux_b
- memp_size = len;
- } else {
-
-- len = text_len + data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
-+ len = text_len + data_len + extra + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), FLAT_DATA_ALIGN);
-+#ifdef ARCH_FLAT_ALIGN_TEXT
-+ /* Reserve space for the text alignment. */
-+ len += FLAT_DATA_ALIGN;
-+#endif
- len = PAGE_ALIGN(len);
- down_write(¤t->mm->mmap_sem);
- textpos = do_mmap(0, 0, len,
-@@ -616,10 +634,17 @@ static int load_flat_file(struct linux_b
- goto err;
- }
-
-+ memp = textpos;
-+#ifdef ARCH_FLAT_ALIGN_TEXT
-+ textpos = ALIGN(textpos + sizeof(struct flat_hdr), FLAT_DATA_ALIGN) - sizeof(struct flat_hdr);
-+#endif
- realdatastart = textpos + ntohl(hdr->data_start);
- datapos = ALIGN(realdatastart +
- MAX_SHARED_LIBS * sizeof(unsigned long),
- FLAT_DATA_ALIGN);
-+// datapos = realdatastart + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN);
-+// reloc = (unsigned long *) (textpos + ntohl(hdr->reloc_start) +
-+// ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN));
-
- reloc = (unsigned long *)
- (datapos + (ntohl(hdr->reloc_start) - text_len));
-@@ -659,7 +684,7 @@ static int load_flat_file(struct linux_b
- }
- if (result >= (unsigned long)-4096) {
- printk("Unable to read code+data+bss, errno %d\n",(int)-result);
-- do_munmap(current->mm, textpos, text_len + data_len + extra +
-+ do_munmap(current->mm, memp, text_len + data_len + extra +
- MAX_SHARED_LIBS * sizeof(unsigned long));
- ret = result;
- goto err;
-@@ -672,6 +697,9 @@ static int load_flat_file(struct linux_b
-
- /* The main program needs a little extra setup in the task structure */
- start_code = textpos + sizeof (struct flat_hdr);
-+#ifdef ARCH_FLAT_ALIGN_TEXT
-+ BUG_ON(ALIGN(start_code, FLAT_DATA_ALIGN) != start_code);
-+#endif
- end_code = textpos + text_len;
- if (id == 0) {
- current->mm->start_code = start_code;
-@@ -800,6 +828,13 @@ static int load_flat_file(struct linux_b
-
- return 0;
- err:
-+ if (flush_happened) {
-+ /*
-+ * The parent process has already started running. We cannot allow the child to return back to user space
-+ * as this child is still uning the parent stack and 2 will clobber each other. We are going to kill this child.
-+ */
-+ do_exit(SIGTERM);
-+ }
- return ret;
- }
-
---- a/fs/Kconfig.binfmt
-+++ b/fs/Kconfig.binfmt
-@@ -30,7 +30,7 @@ config COMPAT_BINFMT_ELF
- config BINFMT_ELF_FDPIC
- bool "Kernel support for FDPIC ELF binaries"
- default y
-- depends on (FRV || BLACKFIN || (SUPERH32 && !MMU))
-+ depends on (FRV || BLACKFIN || (SUPERH32 && !MMU) || UBICOM32)
- help
- ELF FDPIC binaries are based on ELF, but allow the individual load
- segments of a binary to be located in memory independently of each
---- a/include/asm-generic/resource.h
-+++ b/include/asm-generic/resource.h
-@@ -69,13 +69,16 @@
- /*
- * boot-time rlimit defaults for the init task:
- */
-+#ifndef CONFIG_ELF_CORE
-+#define CONFIG_USER_ELF_CORE_SIZE 0
-+#endif
- #define INIT_RLIMITS \
- { \
- [RLIMIT_CPU] = { RLIM_INFINITY, RLIM_INFINITY }, \
- [RLIMIT_FSIZE] = { RLIM_INFINITY, RLIM_INFINITY }, \
- [RLIMIT_DATA] = { RLIM_INFINITY, RLIM_INFINITY }, \
- [RLIMIT_STACK] = { _STK_LIM, _STK_LIM_MAX }, \
-- [RLIMIT_CORE] = { 0, RLIM_INFINITY }, \
-+ [RLIMIT_CORE] = { CONFIG_USER_ELF_CORE_SIZE, RLIM_INFINITY }, \
- [RLIMIT_RSS] = { RLIM_INFINITY, RLIM_INFINITY }, \
- [RLIMIT_NPROC] = { 0, 0 }, \
- [RLIMIT_NOFILE] = { INR_OPEN, INR_OPEN }, \
---- a/include/linux/elf-em.h
-+++ b/include/linux/elf-em.h
-@@ -41,6 +41,7 @@
- * up with a final number.
- */
- #define EM_ALPHA 0x9026
-+#define EM_UBICOM32 0xde3d /* Ubicom32; no ABI */
-
- /* Bogus old v850 magic number, used by old tools. */
- #define EM_CYGNUS_V850 0x9080
---- a/include/linux/fb.h
-+++ b/include/linux/fb.h
-@@ -151,6 +151,10 @@ struct dentry;
- #define FB_ACCEL_PROSAVAGE_DDR 0x8d /* S3 ProSavage DDR */
- #define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */
-
-+#define FB_ACCEL_UBICOM32 0x0100 /* Ubicom32 */
-+#define FB_ACCEL_UBICOM32_VFB 0x0101 /* Ubicom32 VFB */
-+#define FB_ACCEL_UBICOM32_PLIO80 0x0102 /* Ubicom32 PLIO80 */
-+
- struct fb_fix_screeninfo {
- char id[16]; /* identification string eg "TT Builtin" */
- unsigned long smem_start; /* Start of frame buffer mem */
---- a/include/linux/if_ppp.h
-+++ b/include/linux/if_ppp.h
-@@ -114,14 +114,14 @@ struct pppol2tp_ioc_stats {
- __u16 tunnel_id; /* redundant */
- __u16 session_id; /* if zero, get tunnel stats */
- __u32 using_ipsec:1; /* valid only for session_id == 0 */
-- aligned_u64 tx_packets;
-- aligned_u64 tx_bytes;
-- aligned_u64 tx_errors;
-- aligned_u64 rx_packets;
-- aligned_u64 rx_bytes;
-- aligned_u64 rx_seq_discards;
-- aligned_u64 rx_oos_packets;
-- aligned_u64 rx_errors;
-+ __u64 tx_packets;
-+ __u64 tx_bytes;
-+ __u64 tx_errors;
-+ __u64 rx_packets;
-+ __u64 rx_bytes;
-+ __u64 rx_seq_discards;
-+ __u64 rx_oos_packets;
-+ __u64 rx_errors;
- };
-
- #define ifr__name b.ifr_ifrn.ifrn_name
---- a/include/linux/oprofile.h
-+++ b/include/linux/oprofile.h
-@@ -99,6 +99,8 @@ void oprofile_add_sample(struct pt_regs
- */
- void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
- unsigned long event, int is_kernel);
-+void oprofile_add_ext_sample_cpu(unsigned long pc, struct pt_regs * const regs,
-+ unsigned long event, int is_kernel, int cpu);
-
- /* Use this instead when the PC value is not from the regs. Doesn't
- * backtrace. */
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -167,6 +167,9 @@
- /* MAX3100 */
- #define PORT_MAX3100 86
-
-+/* Ubicom32 */
-+#define PORT_UBI32_UARTTIO 87
-+
- #ifdef __KERNEL__
-
- #include <linux/compiler.h>
---- a/include/linux/slab.h
-+++ b/include/linux/slab.h
-@@ -317,4 +317,14 @@ static inline void *kzalloc_node(size_t
- return kmalloc_node(size, flags | __GFP_ZERO, node);
- }
-
-+struct kmem_cache_size_info {
-+ unsigned short page;
-+ unsigned short order;
-+};
-+
-+/*
-+ * get info on all the memory allocated by slab for this named cache
-+ */
-+extern int kmem_cache_block_info(char *name, struct kmem_cache_size_info *data, int max_data);
-+
- #endif /* _LINUX_SLAB_H */
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -865,6 +865,12 @@ config ELF_CORE
- help
- Enable support for generating core dumps. Disabling saves about 4k.
-
-+config USER_ELF_CORE_SIZE
-+ int "user core dump size (10MB to 32MB)"
-+ range 10485760 33554432
-+ default 16777216
-+ depends on ELF_CORE
-+
- config PCSPKR_PLATFORM
- bool "Enable PC-Speaker support" if EMBEDDED
- depends on ALPHA || X86 || MIPS || PPC_PREP || PPC_CHRP || PPC_PSERIES
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -2688,6 +2688,9 @@ static int m_show(struct seq_file *m, vo
- /* Used by oprofile and other similar tools. */
- seq_printf(m, " 0x%p", mod->module_core);
-
-+#ifdef ARCH_PROC_MODULES_EXTRA
-+ ARCH_PROC_MODULES_EXTRA(m, mod);
-+#endif
- /* Taints info */
- if (mod->taints)
- seq_printf(m, " %s", module_flags(mod, buf));
-@@ -2840,8 +2843,12 @@ void print_modules(void)
- printk("Modules linked in:");
- /* Most callers should already have preempt disabled, but make sure */
- preempt_disable();
-- list_for_each_entry_rcu(mod, &modules, list)
-+ list_for_each_entry_rcu(mod, &modules, list) {
- printk(" %s%s", mod->name, module_flags(mod, buf));
-+#ifdef ARCH_OOPS_MODULE_EXTRA
-+ ARCH_OOPS_MODULE_EXTRA(mod);
-+#endif
-+ }
- preempt_enable();
- if (last_unloaded_module[0])
- printk(" [last unloaded: %s]", last_unloaded_module);
---- a/kernel/sched_clock.c
-+++ b/kernel/sched_clock.c
-@@ -38,8 +38,7 @@
- */
- unsigned long long __attribute__((weak)) sched_clock(void)
- {
-- return (unsigned long long)(jiffies - INITIAL_JIFFIES)
-- * (NSEC_PER_SEC / HZ);
-+ return (get_jiffies_64() - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ);
- }
-
- static __read_mostly int sched_clock_running;
---- a/lib/Kconfig.debug
-+++ b/lib/Kconfig.debug
-@@ -621,7 +621,7 @@ config FRAME_POINTER
- bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && \
- (CRIS || M68K || M68KNOMMU || FRV || UML || \
-- AVR32 || SUPERH || BLACKFIN || MN10300) || \
-+ AVR32 || SUPERH || BLACKFIN || MN10300 || UBICOM32) || \
- ARCH_WANT_FRAME_POINTERS
- default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
- help
---- a/mm/Makefile
-+++ b/mm/Makefile
-@@ -38,3 +38,5 @@ obj-$(CONFIG_SMP) += allocpercpu.o
- endif
- obj-$(CONFIG_QUICKLIST) += quicklist.o
- obj-$(CONFIG_CGROUP_MEM_RES_CTLR) += memcontrol.o page_cgroup.o
-+
-+CFLAGS_slab.o := $(PROFILING) -O2
---- a/mm/slab.c
-+++ b/mm/slab.c
-@@ -4100,6 +4100,68 @@ out:
-
- #ifdef CONFIG_SLABINFO
-
-+
-+/*
-+ * get info on all the memory allocated by slab for this named cache
-+ */
-+int kmem_cache_block_info(char *name, struct kmem_cache_size_info *data, int max_data)
-+{
-+ int res = 0;
-+ int found = 0;
-+ int node;
-+ struct kmem_cache *cachep;
-+ struct kmem_list3 *l3;
-+ struct slab *slabp;
-+
-+ /* Find the cache in the chain of caches. */
-+ mutex_lock(&cache_chain_mutex);
-+ list_for_each_entry(cachep, &cache_chain, next) {
-+ if (strcmp(cachep->name, name) == 0) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+ mutex_unlock(&cache_chain_mutex);
-+ if (!found) {
-+ return 0;
-+ }
-+ for_each_online_node(node) {
-+ l3 = cachep->nodelists[node];
-+ if (!l3)
-+ continue;
-+ if (res >= max_data)
-+ break;
-+ check_irq_on();
-+ spin_lock_irq(&l3->list_lock);
-+
-+ list_for_each_entry(slabp, &l3->slabs_full, list) {
-+ if (res >= max_data)
-+ break;
-+ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
-+ data[res].order = cachep->gfporder;
-+ res++;
-+ }
-+ list_for_each_entry(slabp, &l3->slabs_partial, list) {
-+ if (res >= max_data)
-+ break;
-+ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
-+ data[res].order = cachep->gfporder;
-+ res++;
-+ }
-+ list_for_each_entry(slabp, &l3->slabs_free, list) {
-+ if (res >= max_data)
-+ break;
-+ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
-+ data[res].order = cachep->gfporder;
-+ res++;
-+ }
-+
-+ spin_unlock_irq(&l3->list_lock);
-+ }
-+
-+ return res;
-+}
-+
- static void print_slabinfo_header(struct seq_file *m)
- {
- /*
---- a/scripts/mod/file2alias.c
-+++ b/scripts/mod/file2alias.c
-@@ -774,6 +774,15 @@ void handle_moddevtable(struct module *m
- + sym->st_value;
- }
-
-+ /*
-+ * somehow our gcc is not generating st_size correctly and set 0 for some symbols.
-+ * and 0 size will break do_table since it adjust size to (size - id_size)
-+ * this is to make sure st_size fall in range.
-+ */
-+ if (sym->st_size == 0 || sym->st_size > info->sechdrs[sym->st_shndx].sh_size) {
-+ sym->st_size = info->sechdrs[sym->st_shndx].sh_size;
-+ }
-+
- if (sym_is(symname, "__mod_pci_device_table"))
- do_table(symval, sym->st_size,
- sizeof(struct pci_device_id), "pci",
---- a/sound/Kconfig
-+++ b/sound/Kconfig
-@@ -82,6 +82,8 @@ source "sound/parisc/Kconfig"
-
- source "sound/soc/Kconfig"
-
-+source "sound/ubicom32/Kconfig"
-+
- endif # SND
-
- menuconfig SOUND_PRIME
---- a/sound/Makefile
-+++ b/sound/Makefile
-@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmw
- obj-$(CONFIG_SOUND_PRIME) += oss/
- obj-$(CONFIG_DMASOUND) += oss/
- obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
-- sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/
-+ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ ubicom32/
- obj-$(CONFIG_SND_AOA) += aoa/
-
- # This one must be compilable even if sound is configured out
+++ /dev/null
---- a/arch/ubicom32/kernel/vmlinux.lds.S
-+++ b/arch/ubicom32/kernel/vmlinux.lds.S
-@@ -25,7 +25,6 @@
- * arch/blackfin
- * arch/parisc
- */
--#include <asm-generic/vmlinux.lds.h>
- #include <asm/ocm_size.h>
- #include <asm/memory_map.h>
- #include <asm/thread_info.h>
-@@ -201,94 +200,28 @@ SECTIONS {
- *(__ex_table)
- __stop___ex_table = .;
-
-- *(.rodata) *(.rodata.*)
-- *(__vermagic) /* Kernel version magic */
-- *(__markers_strings)
-- *(.rodata1)
-- *(.rodata.str1.1)
-- *(__tracepoints_strings)
--
-- /* PCI quirks */
-- __start_pci_fixups_early = . ;
-- *(.pci_fixup_early)
-- __end_pci_fixups_early = . ;
-- __start_pci_fixups_header = . ;
-- *(.pci_fixup_header)
-- __end_pci_fixups_header = . ;
-- __start_pci_fixups_final = . ;
-- *(.pci_fixup_final)
-- __end_pci_fixups_final = . ;
-- __start_pci_fixups_enable = . ;
-- *(.pci_fixup_enable)
-- __end_pci_fixups_enable = . ;
-- __start_pci_fixups_resume = . ;
-- *(.pci_fixup_resume)
-- __end_pci_fixups_resume = . ;
-- __start_pci_fixups_resume_early = . ;
-- *(.pci_fixup_resume_early)
-- __end_pci_fixups_resume_early = . ;
-- __start_pci_fixups_suspend = . ;
-- *(.pci_fixup_suspend)
-- __end_pci_fixups_suspend = . ;
--
-- __start_builtin_fw = . ;
-- *(.builtin_fw)
-- __end_builtin_fw = . ;
--
--
-- /* Kernel symbol table: Normal symbols */
-- . = ALIGN(4);
-- __start___ksymtab = .;
-- *(__ksymtab)
-- __stop___ksymtab = .;
--
-- /* Kernel symbol table: GPL-only symbols */
-- __start___ksymtab_gpl = .;
-- *(__ksymtab_gpl)
-- __stop___ksymtab_gpl = .;
--
-- /* Kernel symbol table: Normal unused symbols */
-- __start___ksymtab_unused = .;
-- *(__ksymtab_unused)
-- __stop___ksymtab_unused = .;
--
-- /* Kernel symbol table: GPL-only unused symbols */
-- __start___ksymtab_unused_gpl = .;
-- *(__ksymtab_unused_gpl)
-- __stop___ksymtab_unused_gpl = .;
--
-- /* Kernel symbol table: GPL-future symbols */
-- __start___ksymtab_gpl_future = .;
-- *(__ksymtab_gpl_future)
-- __stop___ksymtab_gpl_future = .;
--
-- /* Kernel symbol table: Normal symbols */
-- __start___kcrctab = .;
-- *(__kcrctab)
-- __stop___kcrctab = .;
--
-- /* Kernel symbol table: GPL-only symbols */
-- __start___kcrctab_gpl = .;
-- *(__kcrctab_gpl)
-- __stop___kcrctab_gpl = .;
--
-- /* Kernel symbol table: GPL-future symbols */
-- __start___kcrctab_gpl_future = .;
-- *(__kcrctab_gpl_future)
-- __stop___kcrctab_gpl_future = .;
-+ } > TEXT
-
-- /* Kernel symbol table: strings */
-- *(__ksymtab_strings)
-+ RO_DATA(16)
-
-- /* Built-in module parameters */
-- . = ALIGN(4) ;
-- __start___param = .;
-- *(__param)
-- __stop___param = .;
-+ .rodata : {} > TEXT
-+ .rodata1 : {} > TEXT
-+ .pci_fixup : {} > TEXT
-+ .builtin_fw : {} > TEXT
-+ .rio_route : {} > TEXT
-+ .tracedata : {} > TEXT
-+ __ksymtab : {} > TEXT
-+ __ksymtab_gpl : {} > TEXT
-+ __ksymtab_gpl_future : {} > TEXT
-+ __kcrctab_gpl : {} > TEXT
-+ __kcrctab_unused : {} > TEXT
-+ __kcrctab_unused_gpl : {} > TEXT
-+ __kcrctab_gpl_future : {} > TEXT
-+ __ksymtab_strings : {} > TEXT
-+ __init_rodata : {} > TEXT
-+ __param : {} > TEXT
-
-- . = ALIGN(4) ;
-- _etext = . ;
-- } > TEXT
-+ _etext = .;
-
- .data DATA_ADDR : {
- . = ALIGN(4);
-@@ -349,12 +282,6 @@ SECTIONS {
- PROVIDE (___eh_frame_end = .);
- } > INIT
-
-- /DISCARD/ : {
-- EXIT_TEXT
-- EXIT_DATA
-- *(.exitcall.exit)
-- }
--
- .bss : {
- . = ALIGN(4);
- _sbss = . ;
-@@ -365,6 +292,12 @@ SECTIONS {
- _end = . ;
- } > BSS
-
-+ /DISCARD/ : {
-+ EXIT_TEXT
-+ EXIT_DATA
-+ *(.exitcall.exit)
-+ }
-+
- NOTES > BSS
-
- }
+++ /dev/null
---- a/arch/ubicom32/Makefile
-+++ b/arch/ubicom32/Makefile
-@@ -60,9 +60,6 @@ cflags-$(CONFIG_UBICOM32_V4) := -march=
- ldflags-$(CONFIG_LINKER_RELAXATION) := --relax
- LDFLAGS_vmlinux := $(ldflags-y)
-
--GCCLIBDIR := $(dir $(shell $(CC) $(cflags-y) -print-libgcc-file-name))
--GCC_LIBS := $(GCCLIBDIR)/libgcc.a
--
- KBUILD_CFLAGS += $(cflags-y) -ffunction-sections
- KBUILD_AFLAGS += $(cflags-y)
-
-@@ -84,7 +81,6 @@ core-y += arch/$(ARCH)/kernel/ \
- drivers-$(CONFIG_OPROFILE) += arch/ubicom32/oprofile/
-
- libs-y += arch/$(ARCH)/lib/
--libs-y += $(GCC_LIBS)
-
- archclean:
-
---- a/arch/ubicom32/lib/Makefile
-+++ b/arch/ubicom32/lib/Makefile
-@@ -30,3 +30,4 @@
- #
-
- lib-y := checksum.o delay.o mem_ubicom32.o
-+lib-y += ashldi3.o ashrdi3.o divmod.o lshrdi3.o muldi3.o
---- /dev/null
-+++ b/arch/ubicom32/lib/ashldi3.c
-@@ -0,0 +1,62 @@
-+/* ashrdi3.c extracted from gcc-2.95.2/libgcc2.c which is: */
-+/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-+
-+This file is part of GNU CC.
-+
-+GNU CC is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2, or (at your option)
-+any later version.
-+
-+GNU CC is distributed in the hope that it will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with GNU CC; see the file COPYING. If not, write to
-+the Free Software Foundation, 59 Temple Place - Suite 330,
-+Boston, MA 02111-1307, USA. */
-+
-+#define BITS_PER_UNIT 8
-+
-+typedef int SItype __attribute__ ((mode (SI)));
-+typedef unsigned int USItype __attribute__ ((mode (SI)));
-+typedef int DItype __attribute__ ((mode (DI)));
-+typedef int word_type __attribute__ ((mode (__word__)));
-+
-+struct DIstruct {SItype high, low;};
-+
-+typedef union
-+{
-+ struct DIstruct s;
-+ DItype ll;
-+} DIunion;
-+
-+DItype
-+__ashldi3 (DItype u, word_type b)
-+{
-+ DIunion w;
-+ word_type bm;
-+ DIunion uu;
-+
-+ if (b == 0)
-+ return u;
-+
-+ uu.ll = u;
-+
-+ bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-+ if (bm <= 0)
-+ {
-+ w.s.low = 0;
-+ w.s.high = (USItype)uu.s.low << -bm;
-+ }
-+ else
-+ {
-+ USItype carries = (USItype)uu.s.low >> bm;
-+ w.s.low = (USItype)uu.s.low << b;
-+ w.s.high = ((USItype)uu.s.high << b) | carries;
-+ }
-+
-+ return w.ll;
-+}
---- /dev/null
-+++ b/arch/ubicom32/lib/ashrdi3.c
-@@ -0,0 +1,63 @@
-+/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-+
-+This file is part of GNU CC.
-+
-+GNU CC is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2, or (at your option)
-+any later version.
-+
-+GNU CC is distributed in the hope that it will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with GNU CC; see the file COPYING. If not, write to
-+the Free Software Foundation, 59 Temple Place - Suite 330,
-+Boston, MA 02111-1307, USA. */
-+
-+#define BITS_PER_UNIT 8
-+
-+typedef int SItype __attribute__ ((mode (SI)));
-+typedef unsigned int USItype __attribute__ ((mode (SI)));
-+typedef int DItype __attribute__ ((mode (DI)));
-+typedef int word_type __attribute__ ((mode (__word__)));
-+
-+struct DIstruct {SItype high, low;};
-+
-+typedef union
-+{
-+ struct DIstruct s;
-+ DItype ll;
-+} DIunion;
-+
-+DItype
-+__ashrdi3 (DItype u, word_type b)
-+{
-+ DIunion w;
-+ word_type bm;
-+ DIunion uu;
-+
-+ if (b == 0)
-+ return u;
-+
-+ uu.ll = u;
-+
-+ bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-+ if (bm <= 0)
-+ {
-+ /* w.s.high = 1..1 or 0..0 */
-+ w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1);
-+ w.s.low = uu.s.high >> -bm;
-+ }
-+ else
-+ {
-+ USItype carries = (USItype)uu.s.high << bm;
-+ w.s.high = uu.s.high >> b;
-+ w.s.low = ((USItype)uu.s.low >> b) | carries;
-+ }
-+
-+ return w.ll;
-+}
---- /dev/null
-+++ b/arch/ubicom32/lib/divmod.c
-@@ -0,0 +1,85 @@
-+unsigned long
-+udivmodsi4(unsigned long num, unsigned long den, int modwanted)
-+{
-+ unsigned long bit = 1;
-+ unsigned long res = 0;
-+
-+ while (den < num && bit && !(den & (1L<<31)))
-+ {
-+ den <<=1;
-+ bit <<=1;
-+ }
-+ while (bit)
-+ {
-+ if (num >= den)
-+ {
-+ num -= den;
-+ res |= bit;
-+ }
-+ bit >>=1;
-+ den >>=1;
-+ }
-+ if (modwanted) return num;
-+ return res;
-+}
-+
-+long
-+__udivsi3 (long a, long b)
-+{
-+ return udivmodsi4 (a, b, 0);
-+}
-+
-+long
-+__umodsi3 (long a, long b)
-+{
-+ return udivmodsi4 (a, b, 1);
-+}
-+
-+long
-+__divsi3 (long a, long b)
-+{
-+ int neg = 0;
-+ long res;
-+
-+ if (a < 0)
-+ {
-+ a = -a;
-+ neg = !neg;
-+ }
-+
-+ if (b < 0)
-+ {
-+ b = -b;
-+ neg = !neg;
-+ }
-+
-+ res = udivmodsi4 (a, b, 0);
-+
-+ if (neg)
-+ res = -res;
-+
-+ return res;
-+}
-+
-+long
-+__modsi3 (long a, long b)
-+{
-+ int neg = 0;
-+ long res;
-+
-+ if (a < 0)
-+ {
-+ a = -a;
-+ neg = 1;
-+ }
-+
-+ if (b < 0)
-+ b = -b;
-+
-+ res = udivmodsi4 (a, b, 1);
-+
-+ if (neg)
-+ res = -res;
-+
-+ return res;
-+}
---- /dev/null
-+++ b/arch/ubicom32/lib/lshrdi3.c
-@@ -0,0 +1,62 @@
-+/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-+
-+This file is part of GNU CC.
-+
-+GNU CC is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2, or (at your option)
-+any later version.
-+
-+GNU CC is distributed in the hope that it will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with GNU CC; see the file COPYING. If not, write to
-+the Free Software Foundation, 59 Temple Place - Suite 330,
-+Boston, MA 02111-1307, USA. */
-+
-+#define BITS_PER_UNIT 8
-+
-+typedef int SItype __attribute__ ((mode (SI)));
-+typedef unsigned int USItype __attribute__ ((mode (SI)));
-+typedef int DItype __attribute__ ((mode (DI)));
-+typedef int word_type __attribute__ ((mode (__word__)));
-+
-+struct DIstruct {SItype high, low;};
-+
-+typedef union
-+{
-+ struct DIstruct s;
-+ DItype ll;
-+} DIunion;
-+
-+DItype
-+__lshrdi3 (DItype u, word_type b)
-+{
-+ DIunion w;
-+ word_type bm;
-+ DIunion uu;
-+
-+ if (b == 0)
-+ return u;
-+
-+ uu.ll = u;
-+
-+ bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-+ if (bm <= 0)
-+ {
-+ w.s.high = 0;
-+ w.s.low = (USItype)uu.s.high >> -bm;
-+ }
-+ else
-+ {
-+ USItype carries = (USItype)uu.s.high << bm;
-+ w.s.high = (USItype)uu.s.high >> b;
-+ w.s.low = ((USItype)uu.s.low >> b) | carries;
-+ }
-+
-+ return w.ll;
-+}
---- /dev/null
-+++ b/arch/ubicom32/lib/muldi3.c
-@@ -0,0 +1,87 @@
-+/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and
-+ gcc-2.7.2.3/longlong.h which is: */
-+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-+
-+This file is part of GNU CC.
-+
-+GNU CC is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2, or (at your option)
-+any later version.
-+
-+GNU CC is distributed in the hope that it will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with GNU CC; see the file COPYING. If not, write to
-+the Free Software Foundation, 59 Temple Place - Suite 330,
-+Boston, MA 02111-1307, USA. */
-+
-+#define UWtype USItype
-+#define UHWtype USItype
-+#define W_TYPE_SIZE 32
-+#define __BITS4 (W_TYPE_SIZE / 4)
-+#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
-+#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
-+#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
-+
-+#define umul_ppmm(w1, w0, u, v) \
-+ do { \
-+ UWtype __x0, __x1, __x2, __x3; \
-+ UHWtype __ul, __vl, __uh, __vh; \
-+ \
-+ __ul = __ll_lowpart (u); \
-+ __uh = __ll_highpart (u); \
-+ __vl = __ll_lowpart (v); \
-+ __vh = __ll_highpart (v); \
-+ \
-+ __x0 = (UWtype) __ul * __vl; \
-+ __x1 = (UWtype) __ul * __vh; \
-+ __x2 = (UWtype) __uh * __vl; \
-+ __x3 = (UWtype) __uh * __vh; \
-+ \
-+ __x1 += __ll_highpart (__x0);/* this can't give carry */ \
-+ __x1 += __x2; /* but this indeed can */ \
-+ if (__x1 < __x2) /* did we get it? */ \
-+ __x3 += __ll_B; /* yes, add it in the proper pos. */ \
-+ \
-+ (w1) = __x3 + __ll_highpart (__x1); \
-+ (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \
-+ } while (0)
-+
-+
-+#define __umulsidi3(u, v) \
-+ ({DIunion __w; \
-+ umul_ppmm (__w.s.high, __w.s.low, u, v); \
-+ __w.ll; })
-+
-+typedef int SItype __attribute__ ((mode (SI)));
-+typedef unsigned int USItype __attribute__ ((mode (SI)));
-+typedef int DItype __attribute__ ((mode (DI)));
-+typedef int word_type __attribute__ ((mode (__word__)));
-+
-+struct DIstruct {SItype high, low;};
-+
-+typedef union
-+{
-+ struct DIstruct s;
-+ DItype ll;
-+} DIunion;
-+
-+DItype
-+__muldi3 (DItype u, DItype v)
-+{
-+ DIunion w;
-+ DIunion uu, vv;
-+
-+ uu.ll = u,
-+ vv.ll = v;
-+
-+ w.ll = __umulsidi3 (uu.s.low, vv.s.low);
-+ w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
-+ + (USItype) uu.s.high * (USItype) vv.s.low);
-+
-+ return w.ll;
-+}
---- a/arch/ubicom32/kernel/ubicom32_ksyms.c
-+++ b/arch/ubicom32/kernel/ubicom32_ksyms.c
-@@ -72,7 +72,6 @@ EXPORT_SYMBOL(memmove);
- extern void __ashldi3(void);
- extern void __ashrdi3(void);
- extern void __divsi3(void);
--extern void __divdi3(void);
- extern void __lshrdi3(void);
- extern void __modsi3(void);
- extern void __muldi3(void);
-@@ -83,7 +82,6 @@ extern void __umodsi3(void);
- EXPORT_SYMBOL(__ashldi3);
- EXPORT_SYMBOL(__ashrdi3);
- EXPORT_SYMBOL(__divsi3);
--EXPORT_SYMBOL(__divdi3);
- EXPORT_SYMBOL(__lshrdi3);
- EXPORT_SYMBOL(__modsi3);
- EXPORT_SYMBOL(__muldi3);
+++ /dev/null
---- a/drivers/mtd/devices/ubi32-m25p80.c
-+++ b/drivers/mtd/devices/ubi32-m25p80.c
-@@ -630,8 +630,8 @@ static int ubicom32_flash_driver_erase(s
- /* sanity checks */
- if (instr->addr + instr->len > flash->mtd.size)
- return -EINVAL;
-- if ((instr->addr % mtd->erasesize) != 0
-- || (instr->len % mtd->erasesize) != 0) {
-+ if (((u32) instr->addr % mtd->erasesize) != 0
-+ || ((u32) instr->len % mtd->erasesize) != 0) {
- return -EINVAL;
- }
-
+++ /dev/null
---- a/arch/ubicom32/Makefile
-+++ b/arch/ubicom32/Makefile
-@@ -54,8 +54,8 @@ CFLAGS_MODULE += -mno-fastcall
- #
- # Some CFLAG additions based on specific CPU type.
- #
--cflags-$(CONFIG_UBICOM32_V3) := -march=ubicom32v3 -DIP5000
--cflags-$(CONFIG_UBICOM32_V4) := -march=ubicom32v4 -DIP7000
-+cflags-$(CONFIG_UBICOM32_V3) := -march=ubicom32v3 -mno-fdpic -DIP5000
-+cflags-$(CONFIG_UBICOM32_V4) := -march=ubicom32v4 -mno-fdpic -DIP7000
-
- ldflags-$(CONFIG_LINKER_RELAXATION) := --relax
- LDFLAGS_vmlinux := $(ldflags-y)
+++ /dev/null
---- a/drivers/char/hw_random/Kconfig
-+++ b/drivers/char/hw_random/Kconfig
-@@ -186,3 +186,16 @@ config HW_RANDOM_MXC_RNGA
- module will be called mxc-rnga.
-
- If unsure, say Y.
-+
-+config HW_RANDOM_UBICOM32
-+ tristate "Ubicom32 HW Random Number Generator support"
-+ depends on HW_RANDOM && UBICOM32
-+ default HW_RANDOM
-+ ---help---
-+ This driver provides kernel-side support for the Random Number
-+ Generator hardware found on Ubicom32 processors.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called pasemi-rng.
-+
-+ If unsure, say Y.
---- a/drivers/char/hw_random/Makefile
-+++ b/drivers/char/hw_random/Makefile
-@@ -18,3 +18,4 @@ obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio
- obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o
- obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
- obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o
-+obj-$(CONFIG_HW_RANDOM_UBICOM32) += ubicom32-rng.o
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -61,6 +61,40 @@ config CRYPTO_DEV_GEODE
- To compile this driver as a module, choose M here: the module
- will be called geode-aes.
-
-+config CRYPTO_UBICOM32
-+ bool "Ubicom32 Security Module"
-+ depends on UBICOM32
-+ help
-+ This is the ubicom32 hardware acceleration common code.
-+
-+config CRYPTO_AES_UBICOM32
-+ tristate "Ubicom32 AES implementation"
-+ depends on CRYPTO_UBICOM32
-+ select CRYPTO_ALGAPI
-+ help
-+ This is the ubicom32 hardware AES implementation.
-+
-+config CRYPTO_DES_UBICOM32
-+ tristate "Ubicom32 DES implementation"
-+ depends on CRYPTO_UBICOM32
-+ select CRYPTO_ALGAPI
-+ help
-+ This is the ubicom32 hardware DES and 3DES implementation.
-+
-+config CRYPTO_SHA1_UBICOM32
-+ tristate "Ubicom32 SHA1 implementation"
-+ depends on CRYPTO_UBICOM32
-+ select CRYPTO_ALGAPI
-+ help
-+ This is the ubicom32 hardware SHA1 implementation.
-+
-+config CRYPTO_MD5_UBICOM32
-+ tristate "Ubicom32 MD5 implementation"
-+ depends on CRYPTO_UBICOM32
-+ select CRYPTO_ALGAPI
-+ help
-+ This is the ubicom32 hardware MD5 implementation.
-+
- config ZCRYPT
- tristate "Support for PCI-attached cryptographic adapters"
- depends on S390
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -382,3 +382,10 @@ config MMC_VIA_SDMMC
- If you have a controller with this interface, say Y or M here.
-
- If unsure, say N.
-+
-+config MMC_UBICOM32
-+ tristate "Ubicom32 MMC/SD host controller"
-+ depends on UBICOM32
-+ help
-+ This provides support for the SD/MMC hardware found on Ubicom32
-+ IP7K processors
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -35,6 +35,7 @@ obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
- obj-$(CONFIG_MMC_CB710) += cb710-mmc.o
- obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o
- obj-$(CONFIG_GPIOMMC) += gpiommc.o
-+obj-$(CONFIG_MMC_UBICOM32) += ubicom32sd.o
-
- ifeq ($(CONFIG_CB710_DEBUG),y)
- CFLAGS-cb710-mmc += -DDEBUG
---- a/drivers/mtd/devices/Kconfig
-+++ b/drivers/mtd/devices/Kconfig
-@@ -114,6 +114,31 @@ config MTD_SST25L
- Set up your spi devices with the right board-specific platform data,
- if you want to specify device partitioning.
-
-+config MTD_UBI32_NAND_SPI_ER
-+ tristate "UBI32_NAND SPI-ER support"
-+ help
-+ This driver supports the Micron MT29F1G01 SPI-ER NAND flash chip
-+ using the built in flash controller on the Ubicom32 architecture.
-+ Partial page writes are not supported by this driver.
-+
-+config MTD_NAND_SPI_ER
-+ tristate "NAND SPI-ER support"
-+ help
-+ This driver supports the Micron MT29F1G01 SPI-ER NAND flash chip
-+ using a generic SPI bus. Partial page writes are supported
-+ by this driver.
-+
-+config MTD_UBI32_M25P80
-+ tristate "Ubicom processor support for most SPI Flash chips (AT26DF, M25P, W25X, ...)"
-+ depends on UBICOM32
-+ default y
-+ help
-+ This enables access to most modern SPI flash chips, used for
-+ program and data storage. Series supported include Atmel AT26DF,
-+ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
-+ are supported as well. See the driver source for the current list,
-+ or to add other chips.
-+
- config MTD_SLRAM
- tristate "Uncached system RAM"
- help
---- a/drivers/mtd/devices/Makefile
-+++ b/drivers/mtd/devices/Makefile
-@@ -17,3 +17,6 @@ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd
- obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
- obj-$(CONFIG_MTD_M25P80) += m25p80.o
- obj-$(CONFIG_MTD_SST25L) += sst25l.o
-+obj-$(CONFIG_MTD_UBI32_M25P80) += ubi32-m25p80.o
-+obj-$(CONFIG_MTD_NAND_SPI_ER) += nand-spi-er.o
-+obj-$(CONFIG_MTD_UBI32_NAND_SPI_ER) += ubi32-nand-spi-er.o
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -2608,6 +2608,19 @@ config S6GMAC
-
- source "drivers/net/stmmac/Kconfig"
-
-+config UBICOM32_GMAC
-+ tristate "Ubicom Gigabit Ethernet support"
-+ depends on UBICOM32
-+ help
-+ Gigabit Ethernet support for ubicom32 processors
-+
-+config UBICOM32_OCM_FOR_SKB
-+ bool "USE OCM for SKB (EXPERIMENTAL)"
-+ depends on UBICOM32_GMAC
-+ default n
-+ help
-+ Allocate skb from OCM for Ethernet Receive when possible
-+
- endif # NETDEV_1000
-
- #
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -286,3 +286,5 @@ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
- obj-$(CONFIG_SFC) += sfc/
-
- obj-$(CONFIG_WIMAX) += wimax/
-+
-+obj-$(CONFIG_UBICOM32_GMAC) += ubi32-eth.o
---- a/drivers/net/usb/asix.c
-+++ b/drivers/net/usb/asix.c
-@@ -319,14 +319,33 @@ static int asix_rx_fixup(struct usbnet *
- /* get the packet length */
- size = (u16) (header & 0x0000ffff);
-
-- if ((skb->len) - ((size + 1) & 0xfffe) == 0)
-+ if ((skb->len) - ((size + 1) & 0xfffe) == 0) {
-+#ifndef HAVE_EFFICIENT_UNALIGNED_ACCESS
-+ if (((u32)packet & 0x02) == 0) {
-+ memmove(packet - 2, packet, size);
-+ skb->data -= 2;
-+ skb->tail -= 2;
-+ }
-+#endif
- return 2;
-+ }
-+
- if (size > ETH_FRAME_LEN) {
- deverr(dev,"asix_rx_fixup() Bad RX Length %d", size);
- return 0;
- }
- ax_skb = skb_clone(skb, GFP_ATOMIC);
- if (ax_skb) {
-+#ifndef HAVE_EFFICIENT_UNALIGNED_ACCESS
-+ if (((u32)packet & 0x02) == 0) {
-+ memmove(packet - 2, packet, size);
-+ ax_skb->data = packet - 2;
-+ } else {
-+ ax_skb->data = packet;
-+ }
-+#else
-+ ax_skb->data = packet;
-+#endif
- ax_skb->len = size;
- ax_skb->data = packet;
- skb_set_tail_pointer(ax_skb, size);
-@@ -1125,13 +1144,19 @@ static int ax88178_link_reset(struct usb
- mode = AX88178_MEDIUM_DEFAULT;
-
- if (ecmd.speed == SPEED_1000)
-+#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
- mode |= AX_MEDIUM_GM;
-+#else
-+ mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK;
-+#endif
- else if (ecmd.speed == SPEED_100)
- mode |= AX_MEDIUM_PS;
- else
- mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
-
-+#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
- mode |= AX_MEDIUM_ENCK;
-+#endif
-
- if (ecmd.duplex == DUPLEX_FULL)
- mode |= AX_MEDIUM_FD;
---- a/drivers/oprofile/cpu_buffer.c
-+++ b/drivers/oprofile/cpu_buffer.c
-@@ -327,10 +327,10 @@ static inline void oprofile_end_trace(st
- }
-
- static inline void
--__oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
-- unsigned long event, int is_kernel)
-+__oprofile_add_ext_sample_cpu(unsigned long pc, struct pt_regs * const regs,
-+ unsigned long event, int is_kernel, int cpu)
- {
-- struct oprofile_cpu_buffer *cpu_buf = &__get_cpu_var(cpu_buffer);
-+ struct oprofile_cpu_buffer *cpu_buf = &per_cpu(cpu_buffer, cpu);
- unsigned long backtrace = oprofile_backtrace_depth;
-
- /*
-@@ -352,7 +352,8 @@ __oprofile_add_ext_sample(unsigned long
- void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
- unsigned long event, int is_kernel)
- {
-- __oprofile_add_ext_sample(pc, regs, event, is_kernel);
-+ __oprofile_add_ext_sample_cpu(pc, regs, event,
-+ is_kernel, smp_processor_id());
- }
-
- void oprofile_add_sample(struct pt_regs * const regs, unsigned long event)
-@@ -360,7 +361,8 @@ void oprofile_add_sample(struct pt_regs
- int is_kernel = !user_mode(regs);
- unsigned long pc = profile_pc(regs);
-
-- __oprofile_add_ext_sample(pc, regs, event, is_kernel);
-+ __oprofile_add_ext_sample_cpu(pc, regs, event,
-+ is_kernel, smp_processor_id());
- }
-
- /*
---- a/drivers/pci/Makefile
-+++ b/drivers/pci/Makefile
-@@ -47,8 +47,8 @@ obj-$(CONFIG_PPC) += setup-bus.o
- obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
- obj-$(CONFIG_X86_VISWS) += setup-irq.o
- obj-$(CONFIG_MN10300) += setup-bus.o
-+obj-$(CONFIG_UBICOM32) += setup-bus.o setup-irq.o
-
--#
- # ACPI Related PCI FW Functions
- #
- obj-$(CONFIG_ACPI) += pci-acpi.o
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -879,6 +879,57 @@ config SERIAL_UARTLITE_CONSOLE
- console (the system console is the device which receives all kernel
- messages and warnings and which allows logins in single user mode).
-
-+config SERIAL_UBI32_UARTTIO
-+ tristate "Ubicom UARTTIO support"
-+ depends on UBICOM32=y
-+ select SERIAL_CORE
-+ default y
-+ help
-+ Add support for the Ubicom virtual peripherial serial interface.
-+
-+config SERIAL_UBI32_UARTTIO_NR_UARTS
-+ int "Maximum number of UARTTIO virtual serial ports"
-+ depends on SERIAL_UBI32_UARTTIO
-+ default "4"
-+ help
-+ Set this to the maximum number of serial ports you want the driver to support.
-+
-+config SERIAL_UBI32_UARTTIO_CONSOLE
-+ tristate "Ubicom UARTTIO console support"
-+ depends on SERIAL_UBI32_UARTTIO=y
-+ select SERIAL_CORE_CONSOLE
-+ default y
-+ help
-+ Add support for console on the Ubicom virtual peripherial serial interface.
-+
-+config SERIAL_UBI32_SERDES
-+ bool "Ubicom serial port support"
-+ depends on UBICOM32=y
-+ select SERIAL_CORE
-+ default y
-+ help
-+ Add support for the Ubicom serial interface.
-+
-+config SERIAL_UBI32_SERDES_CONSOLE
-+ bool "Ubicom serial console support"
-+ depends on SERIAL_UBI32_SERDES=y
-+ select SERIAL_CORE_CONSOLE
-+ default y
-+
-+config SERIAL_UBI32_MAILBOX
-+ bool "Ubicom mailbox support"
-+ depends on UBICOM32=y
-+ select SERIAL_CORE
-+ default n
-+ help
-+ Add support for the Ubicom mailbox interface.
-+
-+config SERIAL_UBI32_MAILBOX_CONSOLE
-+ bool "Ubicom mailbox console support"
-+ depends on SERIAL_UBI32_MAILBOX=y
-+ select SERIAL_CORE_CONSOLE
-+ default y
-+
- config SERIAL_SUNCORE
- bool
- depends on SPARC
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -81,3 +81,6 @@ obj-$(CONFIG_SERIAL_KS8695) += serial_ks
- obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
- obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
- obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
-+obj-$(CONFIG_SERIAL_UBI32_SERDES) += ubi32_serdes.o
-+obj-$(CONFIG_SERIAL_UBI32_UARTTIO) += ubi32_uarttio.o
-+obj-$(CONFIG_SERIAL_UBI32_MAILBOX) += ubi32_mailbox.o
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -214,6 +214,15 @@ config SPI_S3C24XX
- help
- SPI driver for Samsung S3C24XX series ARM SoCs
-
-+config SPI_UBICOM32_GPIO
-+ tristate "Ubicom32 SPI over GPIO"
-+ depends on SPI_MASTER && UBICOM32 && EXPERIMENTAL
-+ select SPI_BITBANG
-+ select HAS_DMA
-+ help
-+ SPI driver for the Ubicom32 architecture using
-+ GPIO lines to provide the SPI bus.
-+
- config SPI_S3C24XX_GPIO
- tristate "Samsung S3C24XX series SPI by GPIO"
- depends on ARCH_S3C2410 && EXPERIMENTAL
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52x
- obj-$(CONFIG_SPI_MPC8xxx) += spi_mpc8xxx.o
- obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o
- obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
-+obj-$(CONFIG_SPI_UBICOM32_GPIO) += spi_ubicom32_gpio.o
- obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
- obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
- obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
---- a/drivers/uio/Kconfig
-+++ b/drivers/uio/Kconfig
-@@ -94,4 +94,12 @@ config UIO_PCI_GENERIC
- primarily, for virtualization scenarios.
- If you compile this as a module, it will be called uio_pci_generic.
-
-+config UIO_UBICOM32RING
-+ tristate "Ubicom32 Ring Buffer driver"
-+ default n
-+ help
-+ Userspace I/O interface for a Ubicom32 Ring Buffer.
-+
-+ If you compile this as a module, it will be called uio_ubicom32ring
-+
- endif
---- a/drivers/uio/Makefile
-+++ b/drivers/uio/Makefile
-@@ -6,3 +6,4 @@ obj-$(CONFIG_UIO_SMX) += uio_smx.o
- obj-$(CONFIG_UIO_AEC) += uio_aec.o
- obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o
- obj-$(CONFIG_UIO_PCI_GENERIC) += uio_pci_generic.o
-+obj-$(CONFIG_UIO_UBICOM32RING) += uio_ubicom32ring.o
---- a/drivers/usb/gadget/epautoconf.c
-+++ b/drivers/usb/gadget/epautoconf.c
-@@ -154,6 +154,10 @@ ep_matches (
- /* configure your hardware with enough buffering!! */
- }
- break;
-+
-+ case USB_ENDPOINT_XFER_BULK:
-+ if ((gadget->is_dualspeed) && (ep->maxpacket < 512))
-+ return 0;
- }
-
- /* MATCH!! */
---- a/drivers/usb/Kconfig
-+++ b/drivers/usb/Kconfig
-@@ -22,6 +22,7 @@ config USB_ARCH_HAS_HCD
- default y if PCMCIA && !M32R # sl811_cs
- default y if ARM # SL-811
- default y if SUPERH # r8a66597-hcd
-+ default y if UBICOM32 # Ubicom's onchip USB Duial role controller
- default PCI
-
- # many non-PCI SOC chips embed OHCI
---- a/drivers/usb/musb/Kconfig
-+++ b/drivers/usb/musb/Kconfig
-@@ -14,7 +14,7 @@ config USB_MUSB_HDRC
- select TWL4030_USB if MACH_OMAP_3430SDP
- select NOP_USB_XCEIV if MACH_OMAP3EVM
- select USB_OTG_UTILS
-- tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
-+ tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, Ubicom, ...)'
- help
- Say Y here if your system has a dual role high speed USB
- controller based on the Mentor Graphics silicon IP. Then
---- a/drivers/usb/musb/Makefile
-+++ b/drivers/usb/musb/Makefile
-@@ -30,6 +30,10 @@ ifeq ($(CONFIG_BF52x),y)
- musb_hdrc-objs += blackfin.o
- endif
-
-+ifeq ($(CONFIG_UBICOM32), y)
-+ musb_hdrc-objs += ubi32_usb.o
-+endif
-+
- ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
- musb_hdrc-objs += musb_gadget_ep0.o musb_gadget.o
- endif
---- a/drivers/usb/musb/musb_core.c
-+++ b/drivers/usb/musb/musb_core.c
-@@ -105,6 +105,13 @@
- #include <asm/mach-types.h>
- #endif
-
-+#ifdef CONFIG_UBICOM32
-+#include <asm/ip5000.h>
-+#include <asm/ubicom32-tio.h>
-+extern void ubi32_usb_init(void);
-+extern void ubi32_usb_int_clr(void);
-+#endif
-+
- #include "musb_core.h"
-
-
-@@ -148,8 +155,37 @@ static inline struct musb *dev_to_musb(s
- }
-
- /*-------------------------------------------------------------------------*/
-+#if defined(CONFIG_UBICOM32)
-+
-+/*
-+ * Load an endpoint's FIFO
-+ */
-+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 wCount, const u8 *pSource)
-+{
-+ void __iomem *fifo = hw_ep->fifo;
-+
-+ prefetch((u8 *)pSource);
-+
-+ DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
-+ 'T', hw_ep->epnum, fifo, wCount, pSource);
-+
-+ usb_tio_write_fifo((u32)fifo, (u32)pSource, wCount);
-+
-+}
-+
-+/*
-+ * Unload an endpoint's FIFO
-+ */
-+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 wCount, u8 *pDest)
-+{
-+
-+ void __iomem *fifo = hw_ep->fifo;
-+ DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
-+ 'R', hw_ep->epnum, fifo, wCount, pDest);
-+ usb_tio_read_fifo((u32)fifo, (u32)pDest, wCount);
-+}
-
--#if !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
-+#elif !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
-
- /*
- * Load an endpoint's FIFO
-@@ -228,8 +264,7 @@ void musb_read_fifo(struct musb_hw_ep *h
- readsb(fifo, dst, len);
- }
- }
--
--#endif /* normal PIO */
-+#endif /* !T6010 && !BLACKFIN */
-
-
- /*-------------------------------------------------------------------------*/
-@@ -890,12 +925,19 @@ void musb_start(struct musb *musb)
- musb_writeb(regs, MUSB_TESTMODE, 0);
-
- /* put into basic highspeed mode and start session */
-+#ifndef CONFIG_UBICOM32
- musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
- | MUSB_POWER_SOFTCONN
- | MUSB_POWER_HSENAB
- /* ENSUSPEND wedges tusb */
- /* | MUSB_POWER_ENSUSPEND */
- );
-+#else
-+ musb_writeb(regs, MUSB_POWER, MUSB_POWER_HSENAB
-+ /* ENSUSPEND wedges tusb */
-+ /* | MUSB_POWER_ENSUSPEND */
-+ );
-+#endif
-
- musb->is_active = 0;
- devctl = musb_readb(regs, MUSB_DEVCTL);
-@@ -1096,6 +1138,7 @@ static struct fifo_cfg __initdata mode_4
- };
-
-
-+#ifndef CONFIG_UBICOM32
- /*
- * configure a fifo; for non-shared endpoints, this may be called
- * once for a tx fifo and once for an rx fifo.
-@@ -1255,7 +1298,7 @@ static int __init ep_config_from_table(s
-
- return 0;
- }
--
-+#endif /* CONFIG_UBICOM32 */
-
- /*
- * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
-@@ -1271,6 +1314,11 @@ static int __init ep_config_from_hw(stru
- DBG(2, "<== static silicon ep config\n");
-
- /* FIXME pick up ep0 maxpacket size */
-+#ifdef CONFIG_UBICOM32
-+ /* set ep0 to shared_fifo, otherwise urb will be put to out_qh but ep0_irq try to get the urb from in_qh*/
-+ hw_ep = musb->endpoints;
-+ hw_ep->is_shared_fifo = true;
-+#endif
-
- for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
- musb_ep_select(mbase, epnum);
-@@ -1291,14 +1339,27 @@ static int __init ep_config_from_hw(stru
- /* REVISIT: this algorithm is lazy, we should at least
- * try to pick a double buffered endpoint.
- */
-+#ifndef CONFIG_UBICOM32
- if (musb->bulk_ep)
- continue;
- musb->bulk_ep = hw_ep;
-+#else
-+ if ((musb->bulk_ep_in) && (musb->bulk_ep_out))
-+ continue;
-+ /* Save theEP with 1024 Bytes FIFO for ISO */
-+ if(hw_ep->max_packet_sz_tx == 512) {
-+ if (!musb->bulk_ep_in) {
-+ musb->bulk_ep_in = hw_ep;
-+ } else if (!musb->bulk_ep_out) {
-+ musb->bulk_ep_out = hw_ep;
-+ }
-+ }
-+#endif /* CONFIG_UBICOM32 */
- #endif
- }
-
- #ifdef CONFIG_USB_MUSB_HDRC_HCD
-- if (!musb->bulk_ep) {
-+ if ((!musb->bulk_ep_in) || (!musb->bulk_ep_out)) {
- pr_debug("%s: missing bulk\n", musb_driver_name);
- return -EINVAL;
- }
-@@ -1407,12 +1468,16 @@ static int __init musb_core_init(u16 mus
- musb->epmask = 1;
-
- if (reg & MUSB_CONFIGDATA_DYNFIFO) {
-+#ifndef CONFIG_UBICOM32
- if (musb->config->dyn_fifo)
- status = ep_config_from_table(musb);
-- else {
-+ else
-+#endif
-+ {
- ERR("reconfigure software for Dynamic FIFOs\n");
- status = -ENODEV;
- }
-+
- } else {
- if (!musb->config->dyn_fifo)
- status = ep_config_from_hw(musb);
-@@ -1476,8 +1541,8 @@ static int __init musb_core_init(u16 mus
-
- /*-------------------------------------------------------------------------*/
-
--#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
--
-+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_UBICOM32)
-+static u32_t musb_int_count = 0;
- static irqreturn_t generic_interrupt(int irq, void *__hci)
- {
- unsigned long flags;
-@@ -1486,10 +1551,17 @@ static irqreturn_t generic_interrupt(int
-
- spin_lock_irqsave(&musb->lock, flags);
-
-+#ifndef CONFIG_UBICOM32
- musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
- musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
- musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
-+#else
-+ musb_read_int_status(&musb->int_usb, &musb->int_tx, &musb->int_rx);
-+ //ubi32_usb_int_clr();
-+ musb_int_count++;
-+#endif
-
-+ DBG(4, "usb %x, tx %x, rx %x", musb->int_usb, musb->int_tx, musb->int_rx);
- if (musb->int_usb || musb->int_tx || musb->int_rx)
- retval = musb_interrupt(musb);
-
-@@ -2241,6 +2313,10 @@ static struct platform_driver musb_drive
-
- static int __init musb_init(void)
- {
-+#ifdef CONFIG_UBICOM32
-+ ubi32_usb_init();
-+#endif
-+
- #ifdef CONFIG_USB_MUSB_HDRC_HCD
- if (usb_disabled())
- return 0;
---- a/drivers/usb/musb/musb_core.h
-+++ b/drivers/usb/musb/musb_core.h
-@@ -339,7 +339,12 @@ struct musb {
- * queue until it completes or NAKs too much; then we try the next
- * endpoint.
- */
-+#ifdef CONFIG_UBICOM32
-+ struct musb_hw_ep *bulk_ep_in;
-+ struct musb_hw_ep *bulk_ep_out;
-+#else
- struct musb_hw_ep *bulk_ep;
-+#endif
-
- struct list_head control; /* of musb_qh */
- struct list_head in_bulk; /* of musb_qh */
---- a/drivers/usb/musb/musb_gadget.c
-+++ b/drivers/usb/musb/musb_gadget.c
-@@ -434,7 +434,7 @@ void musb_g_tx(struct musb *musb, u8 epn
- * probably rates reporting as a host error
- */
- if (csr & MUSB_TXCSR_P_SENTSTALL) {
-- csr |= MUSB_TXCSR_P_WZC_BITS;
-+ csr &= ~(MUSB_TXCSR_P_WZC_BITS);
- csr &= ~MUSB_TXCSR_P_SENTSTALL;
- musb_writew(epio, MUSB_TXCSR, csr);
- break;
-@@ -442,7 +442,7 @@ void musb_g_tx(struct musb *musb, u8 epn
-
- if (csr & MUSB_TXCSR_P_UNDERRUN) {
- /* we NAKed, no big deal ... little reason to care */
-- csr |= MUSB_TXCSR_P_WZC_BITS;
-+ csr &= ~(MUSB_TXCSR_P_WZC_BITS);
- csr &= ~(MUSB_TXCSR_P_UNDERRUN
- | MUSB_TXCSR_TXPKTRDY);
- musb_writew(epio, MUSB_TXCSR, csr);
-@@ -577,12 +577,18 @@ static void rxstate(struct musb *musb, s
- {
- const u8 epnum = req->epnum;
- struct usb_request *request = &req->request;
-- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
-+ struct musb_ep *musb_ep = NULL;
- void __iomem *epio = musb->endpoints[epnum].regs;
-- unsigned fifo_count = 0;
-- u16 len = musb_ep->packet_sz;
-+ u16 fifo_count = 0;
-+ u16 len = 0;
- u16 csr = musb_readw(epio, MUSB_RXCSR);
-
-+ if (musb->endpoints[epnum].is_shared_fifo)
-+ musb_ep = &musb->endpoints[epnum].ep_in;
-+ else
-+ musb_ep = &musb->endpoints[epnum].ep_out;
-+ len = musb_ep->packet_sz;
-+
- /* We shouldn't get here while DMA is active, but we do... */
- if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
- DBG(4, "DMA pending...\n");
-@@ -730,7 +736,7 @@ static void rxstate(struct musb *musb, s
- */
-
- /* ack the read! */
-- csr |= MUSB_RXCSR_P_WZC_BITS;
-+ csr &= ~MUSB_RXCSR_P_WZC_BITS;
- csr &= ~MUSB_RXCSR_RXPKTRDY;
- musb_writew(epio, MUSB_RXCSR, csr);
- }
-@@ -749,10 +755,15 @@ void musb_g_rx(struct musb *musb, u8 epn
- u16 csr;
- struct usb_request *request;
- void __iomem *mbase = musb->mregs;
-- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
-+ struct musb_ep *musb_ep = NULL;
- void __iomem *epio = musb->endpoints[epnum].regs;
- struct dma_channel *dma;
-
-+ if (musb->endpoints[epnum].is_shared_fifo)
-+ musb_ep = &musb->endpoints[epnum].ep_in;
-+ else
-+ musb_ep = &musb->endpoints[epnum].ep_out;
-+
- musb_ep_select(mbase, epnum);
-
- request = next_request(musb_ep);
-@@ -1756,7 +1767,9 @@ int usb_gadget_register_driver(struct us
- }
- }
- }
--
-+#ifndef CONFIG_USB_MUSB_OTG
-+ musb_pullup(musb, 1);
-+#endif
- return retval;
- }
- EXPORT_SYMBOL(usb_gadget_register_driver);
---- a/drivers/usb/musb/musb_gadget_ep0.c
-+++ b/drivers/usb/musb/musb_gadget_ep0.c
-@@ -241,14 +241,14 @@ __acquires(musb->lock)
- case USB_REQ_SET_ADDRESS:
- /* change it after the status stage */
- musb->set_address = true;
-- musb->address = (u8) (ctrlrequest->wValue & 0x7f);
-+ musb->address = (u8) (le16_to_cpu(ctrlrequest->wValue) & 0x7f);
- handled = 1;
- break;
-
- case USB_REQ_CLEAR_FEATURE:
- switch (recip) {
- case USB_RECIP_DEVICE:
-- if (ctrlrequest->wValue
-+ if (le16_to_cpu(ctrlrequest->wValue)
- != USB_DEVICE_REMOTE_WAKEUP)
- break;
- musb->may_wakeup = 0;
-@@ -262,8 +262,8 @@ __acquires(musb->lock)
-
- if (num == 0
- || num >= MUSB_C_NUM_EPS
-- || ctrlrequest->wValue
-- != USB_ENDPOINT_HALT)
-+ || le16_to_cpu(ctrlrequest->wValue
-+ != USB_ENDPOINT_HALT))
- break;
-
- if (ctrlrequest->wIndex & USB_DIR_IN)
-@@ -293,7 +293,7 @@ __acquires(musb->lock)
- switch (recip) {
- case USB_RECIP_DEVICE:
- handled = 1;
-- switch (ctrlrequest->wValue) {
-+ switch (le16_to_cpu(ctrlrequest->wValue)) {
- case USB_DEVICE_REMOTE_WAKEUP:
- musb->may_wakeup = 1;
- break;
-@@ -375,8 +375,8 @@ stall:
-
- if (epnum == 0
- || epnum >= MUSB_C_NUM_EPS
-- || ctrlrequest->wValue
-- != USB_ENDPOINT_HALT)
-+ || le16_to_cpu(ctrlrequest->wValue
-+ != USB_ENDPOINT_HALT))
- break;
-
- ep = musb->endpoints + epnum;
---- a/drivers/usb/musb/musb_host.c
-+++ b/drivers/usb/musb/musb_host.c
-@@ -160,7 +160,11 @@ static inline void musb_h_tx_start(struc
- /* NOTE: no locks here; caller should lock and select EP */
- if (ep->epnum) {
- txcsr = musb_readw(ep->regs, MUSB_TXCSR);
-+#ifndef CONFIG_UBICOM32
- txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
-+#else
-+ txcsr |= (MUSB_TXCSR_TXPKTRDY & (~MUSB_TXCSR_H_WZC_BITS));
-+#endif
- musb_writew(ep->regs, MUSB_TXCSR, txcsr);
- } else {
- txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY;
-@@ -235,6 +239,8 @@ musb_start_urb(struct musb *musb, int is
- break;
- default: /* bulk, interrupt */
- /* actual_length may be nonzero on retry paths */
-+ if (urb->actual_length)
-+ DBG(3 ,"musb_start_urb: URB %p retried, len: %d\n", urb, urb->actual_length);
- buf = urb->transfer_buffer + urb->actual_length;
- len = urb->transfer_buffer_length - urb->actual_length;
- }
-@@ -532,7 +538,11 @@ musb_host_packet_rx(struct musb *musb, s
- musb_read_fifo(hw_ep, length, buf);
-
- csr = musb_readw(epio, MUSB_RXCSR);
-+#ifndef CONFIG_UBICOM32
- csr |= MUSB_RXCSR_H_WZC_BITS;
-+#else
-+ csr &= ~MUSB_RXCSR_H_WZC_BITS;
-+#endif
- if (unlikely(do_flush))
- musb_h_flush_rxfifo(hw_ep, csr);
- else {
-@@ -566,6 +576,7 @@ musb_rx_reinit(struct musb *musb, struct
-
- /* if programmed for Tx, put it in RX mode */
- if (ep->is_shared_fifo) {
-+#ifndef CONFIG_UBICOM32
- csr = musb_readw(ep->regs, MUSB_TXCSR);
- if (csr & MUSB_TXCSR_MODE) {
- musb_h_tx_flush_fifo(ep);
-@@ -580,7 +591,18 @@ musb_rx_reinit(struct musb *musb, struct
- */
- if (csr & MUSB_TXCSR_DMAMODE)
- musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE);
-+
-+#else
-+ /* clear mode (and everything else) to enable Rx */
- musb_writew(ep->regs, MUSB_TXCSR, 0);
-+ /* scrub all previous state, clearing toggle */
-+ csr = musb_readw(ep->regs, MUSB_RXCSR);
-+ if (csr & MUSB_RXCSR_RXPKTRDY)
-+ WARNING("rx%d, packet/%d ready?\n", ep->epnum,
-+ musb_readw(ep->regs, MUSB_RXCOUNT));
-+
-+ musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
-+#endif
-
- /* scrub all previous state, clearing toggle */
- } else {
-@@ -1108,6 +1130,16 @@ void musb_host_tx(struct musb *musb, u8
- void __iomem *mbase = musb->mregs;
- struct dma_channel *dma;
-
-+#ifdef CONFIG_UBICOM32
-+ if (hw_ep->is_shared_fifo) {
-+ qh = hw_ep->in_qh;
-+ }
-+#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS
-+ printk(KERN_DEBUG "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
-+ dma ? ", dma" : "");
-+#endif
-+#endif
-+
- musb_ep_select(mbase, epnum);
- tx_csr = musb_readw(epio, MUSB_TXCSR);
-
-@@ -1148,9 +1180,14 @@ void musb_host_tx(struct musb *musb, u8
- * we have a candidate... NAKing is *NOT* an error
- */
- musb_ep_select(mbase, epnum);
-+#ifndef CONFIG_UBICOM32
- musb_writew(epio, MUSB_TXCSR,
- MUSB_TXCSR_H_WZC_BITS
- | MUSB_TXCSR_TXPKTRDY);
-+#else
-+ musb_writew(epio, MUSB_TXCSR,
-+ MUSB_TXCSR_TXPKTRDY);
-+#endif
- return;
- }
-
-@@ -1324,8 +1361,14 @@ void musb_host_tx(struct musb *musb, u8
- qh->segsize = length;
-
- musb_ep_select(mbase, epnum);
-+#ifndef CONFIG_UBICOM32
-+ musb_writew(epio, MUSB_TXCSR,
-+ MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
-+#else
- musb_writew(epio, MUSB_TXCSR,
-- MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
-+ MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY);
-+#endif
-+
- }
-
-
-@@ -1385,7 +1428,11 @@ static void musb_bulk_rx_nak_timeout(str
-
- /* clear nak timeout bit */
- rx_csr = musb_readw(epio, MUSB_RXCSR);
-+#ifndef CONFIG_UBICOM32
- rx_csr |= MUSB_RXCSR_H_WZC_BITS;
-+#else
-+ rx_csr &= ~MUSB_RXCSR_H_WZC_BITS;
-+#endif
- rx_csr &= ~MUSB_RXCSR_DATAERROR;
- musb_writew(epio, MUSB_RXCSR, rx_csr);
-
-@@ -1454,6 +1501,13 @@ void musb_host_rx(struct musb *musb, u8
-
- pipe = urb->pipe;
-
-+#ifdef CONFIG_UBICOM32
-+#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS
-+ printk(KERN_DEBUG "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
-+ xfer_len, dma ? ", dma" : "");
-+#endif
-+#endif
-+
- DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
- epnum, rx_csr, urb->actual_length,
- dma ? dma->actual_len : 0);
-@@ -1492,8 +1546,15 @@ void musb_host_rx(struct musb *musb, u8
- return;
- }
- musb_ep_select(mbase, epnum);
-+#ifndef CONFIG_UBICOM32
- rx_csr |= MUSB_RXCSR_H_WZC_BITS;
- rx_csr &= ~MUSB_RXCSR_DATAERROR;
-+#else
-+ /* NEED TO EVALUATE CHANGE */
-+ rx_csr &= ~MUSB_RXCSR_H_WZC_BITS;
-+ rx_csr &= ~MUSB_RXCSR_DATAERROR;
-+// musb_writew(epio, MUSB_RXCSR, (~(MUSB_RXCSR_H_WZC_BITS))| MUSB_RXCSR_H_REQPKT);
-+#endif
- musb_writew(epio, MUSB_RXCSR, rx_csr);
-
- goto finish;
-@@ -1554,8 +1615,13 @@ void musb_host_rx(struct musb *musb, u8
- rx_csr &= ~MUSB_RXCSR_H_REQPKT;
-
- musb_ep_select(mbase, epnum);
-+#ifndef CONFIG_UBICOM32
- musb_writew(epio, MUSB_RXCSR,
- MUSB_RXCSR_H_WZC_BITS | rx_csr);
-+#else
-+ musb_writew(epio, MUSB_RXCSR,
-+ (~MUSB_RXCSR_H_WZC_BITS) & rx_csr);
-+#endif
- }
- #endif
- if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) {
-@@ -1585,7 +1651,7 @@ void musb_host_rx(struct musb *musb, u8
- else
- done = false;
-
-- } else {
-+ } else {
- /* done if urb buffer is full or short packet is recd */
- done = (urb->actual_length + xfer_len >=
- urb->transfer_buffer_length
-@@ -1799,7 +1865,11 @@ static int musb_schedule(
- if (musb_ep_get_qh(hw_ep, is_in) != NULL)
- continue;
-
-+#ifndef CONFIG_UBICOM32
- if (hw_ep == musb->bulk_ep)
-+#else
-+ if ((hw_ep == musb->bulk_ep_in) || (hw_ep == musb->bulk_ep_out)) /* Ubicom */
-+#endif
- continue;
-
- if (is_in)
-@@ -1813,7 +1883,14 @@ static int musb_schedule(
- best_end = epnum;
- }
- }
-+
-+#ifdef CONFIG_UBICOM32
-+ if (((best_diff >= qh->maxpacket)) && ((qh->type == USB_ENDPOINT_XFER_BULK) && (!is_in)))
-+ best_end = -1;
-+#endif
-+
- /* use bulk reserved ep1 if no other ep is free */
-+#ifndef CONFIG_UBICOM32
- if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
- hw_ep = musb->bulk_ep;
- if (is_in)
-@@ -1835,6 +1912,22 @@ static int musb_schedule(
- } else if (best_end < 0) {
- return -ENOSPC;
- }
-+#else
-+ if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
-+ /* hw_ep = musb->bulk_ep; */
-+ if (is_in) {
-+ head = &musb->in_bulk;
-+ hw_ep = musb->bulk_ep_in; /* UBICOM */
-+ }
-+ else {
-+ head = &musb->out_bulk;
-+ hw_ep = musb->bulk_ep_out; /* UBICOM */
-+ }
-+ goto success;
-+ } else if (best_end < 0) {
-+ return -ENOSPC;
-+ }
-+#endif
-
- idle = 1;
- qh->mux = 0;
-@@ -1846,6 +1939,13 @@ success:
- list_add_tail(&qh->ring, head);
- qh->mux = 1;
- }
-+ /*
-+ * It's not make sense to set NAK timeout when qh->mux = 0,
-+ * There is nothing else to schedule
-+ */
-+ if ((qh->type == USB_ENDPOINT_XFER_BULK) && (qh->mux == 0))
-+ qh->intv_reg = 0;
-+
- qh->hw_ep = hw_ep;
- qh->hep->hcpriv = qh;
- if (idle)
-@@ -1964,6 +2064,15 @@ static int musb_urb_enqueue(
- /* ISO always uses logarithmic encoding */
- interval = min_t(u8, epd->bInterval, 16);
- break;
-+#ifdef COMFIG_UBICOM32
-+ case USB_ENDPOINT_XFER_BULK:
-+ if (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
-+ interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16: 2;
-+ else
-+ interval = 0;
-+ break;
-+#endif
-+
- default:
- /* REVISIT we actually want to use NAK limits, hinting to the
- * transfer scheduling logic to try some other qh, e.g. try
---- a/drivers/usb/musb/musb_io.h
-+++ b/drivers/usb/musb/musb_io.h
-@@ -58,6 +58,7 @@ static inline void writesb(const void __
-
- #ifndef CONFIG_BLACKFIN
-
-+#ifndef CONFIG_UBICOM32
- /* NOTE: these offsets are all in bytes */
-
- static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
-@@ -72,7 +73,37 @@ static inline void musb_writew(void __io
-
- static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
- { __raw_writel(data, addr + offset); }
-+#else
-+#include <asm/ubicom32-tio.h>
-+static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
-+{
-+ u16 data;
-+ usb_tio_read_u16((u32)(addr + offset), &data);
-+ return data;
-+}
-
-+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
-+{
-+ u8 data;
-+ usb_tio_read_u8((u32)(addr + offset), &data);
-+ return data;
-+}
-+
-+static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
-+{
-+ usb_tio_write_u16((u32)(addr + offset), data);
-+}
-+
-+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
-+{
-+ usb_tio_write_u8((u32)(addr + offset), data);
-+}
-+
-+static inline void musb_read_int_status(u8_t *int_usb, u16_t *int_tx, u16_t *int_rx)
-+{
-+ return usb_tio_read_int_status(int_usb, int_tx, int_rx);
-+}
-+#endif /* CONFIG_UBICOM32 */
-
- #ifdef CONFIG_USB_TUSB6010
-
-@@ -106,7 +137,7 @@ static inline void musb_writeb(void __io
- __raw_writew(tmp, addr + (offset & ~1));
- }
-
--#else
-+#elif !defined(CONFIG_UBICOM32)
-
- static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
- { return __raw_readb(addr + offset); }
---- a/drivers/usb/musb/musb_regs.h
-+++ b/drivers/usb/musb/musb_regs.h
-@@ -167,6 +167,7 @@
- (MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
- | MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
-
-+
- /* RXCSR in Peripheral and Host mode */
- #define MUSB_RXCSR_AUTOCLEAR 0x8000
- #define MUSB_RXCSR_DMAENAB 0x2000
---- a/drivers/video/backlight/Kconfig
-+++ b/drivers/video/backlight/Kconfig
-@@ -100,6 +100,63 @@ config LCD_HP700
- If you have an HP Jornada 700 series handheld (710/720/728)
- say Y to enable LCD control driver.
-
-+config LCD_UBICOM32POWER
-+ tristate "Ubicom LCD power Driver"
-+ depends on LCD_CLASS_DEVICE && UBICOM32
-+ default n
-+ help
-+ If you have a Ubicom32 based system with an LCD panel that requires
-+ power control, say Y to enable the power control driver for it.
-+
-+config LCD_UBICOM32
-+ tristate "Ubicom Backlight Driver"
-+ depends on LCD_CLASS_DEVICE && UBICOM32
-+ default n
-+ help
-+ This driver takes care of initialization of LCD panels with
-+ built in controllers.
-+
-+menu "Ubicom32 LCD Panel Support"
-+ depends on UBICOM32 && LCD_UBICOM32
-+
-+config LCD_UBICOM32_TFT2N0369E_P
-+ bool "TFT2N0369E (Portrait)"
-+ default n
-+ help
-+ Support for TFT2N0369 in portrait mode
-+
-+config LCD_UBICOM32_TFT2N0369E_L
-+ bool "TFT2N0369E (Landscape)"
-+ default n
-+ help
-+ Support for TFT2N0369 in landscape mode
-+
-+config LCD_UBICOM32_CFAF240320KTTS
-+ bool "CFAF240320KTTS"
-+ default n
-+ help
-+ Support for CFAF240320KTTS
-+
-+config LCD_UBICOM32_CFAF240320KTTS_180
-+ bool "CFAF240320KTTS (180 rotation)"
-+ default n
-+ help
-+ Support for CFAF240320KTTS rotated 180 degrees
-+
-+config LCD_UBICOM32_CFAF240320D
-+ bool "CFAF240320D"
-+ default n
-+ help
-+ Support for CFAF240320D
-+
-+config LCD_UBICOM32_CFAF320240F
-+ bool "CFAF320240F"
-+ default n
-+ help
-+ Support for CFAF320240F
-+
-+endmenu
-+
- #
- # Backlight
- #
-@@ -262,3 +319,11 @@ config BACKLIGHT_ADP5520
- To compile this driver as a module, choose M here: the module will
- be called adp5520_bl.
-
-+config BACKLIGHT_UBICOM32
-+ tristate "Ubicom Backlight Driver"
-+ depends on BACKLIGHT_CLASS_DEVICE && UBICOM32
-+ default n
-+ help
-+ If you have a Ubicom32 based system with a backlight say Y to enable the
-+ backlight driver.
-+
---- a/drivers/video/backlight/Makefile
-+++ b/drivers/video/backlight/Makefile
-@@ -10,6 +10,9 @@ obj-$(CONFIG_LCD_PLATFORM) += platfor
- obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
- obj-$(CONFIG_LCD_TDO24M) += tdo24m.o
- obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
-+obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
-+obj-$(CONFIG_LCD_UBICOM32POWER) += ubicom32lcdpower.o
-+obj-$(CONFIG_LCD_UBICOM32) += ubicom32lcd.o
-
- obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
- obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
-@@ -28,4 +31,4 @@ obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886
- obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
- obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o
- obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o
--
-+obj-$(CONFIG_BACKLIGHT_UBICOM32) += ubicom32bl.o
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -611,6 +611,50 @@ config FB_BFIN_T350MCQB
- This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
- It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
-
-+config FB_UBICOM32
-+ tristate "Ubicom32 Frame Buffer driver"
-+ depends on FB && UBICOM32
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ select FONT_6x11 if FRAMEBUFFER_CONSOLE
-+ help
-+ This is the framebuffer device driver for the Ubicom32 architecture.
-+ You can configure video memory by using kernel command line parameters, for example:
-+ video=ubicomfb:vram_size=512,init_value=0xffff
-+
-+config FB_UBICOM32_PLIO80
-+ tristate "Ubicom32 80 Bus PLIO Frame Buffer driver"
-+ depends on FB && UBICOM32
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ select FONT_6x11 if FRAMEBUFFER_CONSOLE
-+ select UBICOM32_PLIO
-+ help
-+ This is a framebuffer device driver for the Ubicom32 architecture.
-+ You can configure the xres, yres and vram size (in kilobytes) by using
-+ kernel command line parameters, for example:
-+ video=ubicom32vfb:xres=320,yres=240,vram_size=512
-+
-+config FB_UBICOM32_VIRTUAL
-+ tristate "Ubicom32 Virtual Frame Buffer driver"
-+ depends on FB && UBICOM32
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ select FONT_6x11 if FRAMEBUFFER_CONSOLE
-+ help
-+ This is a virtual framebuffer device driver for the Ubicom32 architecture.
-+ You can configure the xres, yres and vram size (in kilobytes) by using
-+ kernel command line parameters, for example:
-+ video=ubicom32vfb:xres=320,yres=240,vram_size=512
-+
-+config FB_UBICOM32_VIRTUAL_NOAUTO
-+ bool "Do not automatically load"
-+ depends on FB_UBICOM32_VIRTUAL
-+ help
-+ Select this option to prevent the VFB from automatically loading at boot.
-
- config FB_STI
- tristate "HP STI frame buffer device support"
---- a/drivers/video/Makefile
-+++ b/drivers/video/Makefile
-@@ -140,6 +140,10 @@ obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin
- obj-$(CONFIG_FB_MX3) += mx3fb.o
- obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o
-
-+obj-$(CONFIG_FB_UBICOM32) += ubicom32fb.o
-+obj-$(CONFIG_FB_UBICOM32_PLIO80) += ubicom32plio80.o
-+obj-$(CONFIG_FB_UBICOM32_VIRTUAL) += ubicom32vfb.o
-+
- # the test framebuffer is last
- obj-$(CONFIG_FB_VIRTUAL) += vfb.o
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -973,6 +973,19 @@ config WATCHDOG_RIO
- machines. The watchdog timeout period is normally one minute but
- can be changed with a boot-time parameter.
-
-+# Ubicom32
-+
-+config UBI32_WDT
-+ tristate "Ubicom32 Hardware Watchdog support"
-+ depends on UBICOM32
-+ ---help---
-+ If you say yes here you will get support for the Ubicom32 On-Chip
-+ Watchdog Timer. If you have one of these processors and wish to
-+ have watchdog support enabled, say Y, otherwise say N.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called ubi32_wdt.
-+
- # XTENSA Architecture
-
- #
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -139,6 +139,9 @@ obj-$(CONFIG_SH_WDT) += shwdt.o
- obj-$(CONFIG_WATCHDOG_RIO) += riowd.o
- obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o
-
-+# Ubicom32 Architecture
-+obj-$(CONFIG_UBI32_WDT) += ubi32_wdt.o
-+
- # XTENSA Architecture
-
- # Architecture Independant
---- a/fs/binfmt_flat.c
-+++ b/fs/binfmt_flat.c
-@@ -67,6 +67,11 @@
- #define FLAT_DATA_ALIGN (sizeof(void *))
- #endif
-
-+#ifndef ARCH_FLAT_ALIGN
-+#undef FLAT_DATA_ALIGN
-+#define FLAT_DATA_ALIGN ARCH_FLAT_ALIGN
-+#endif
-+
- #define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
- #define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */
-
-@@ -434,6 +439,7 @@ static int load_flat_file(struct linux_b
- loff_t fpos;
- unsigned long start_code, end_code;
- int ret;
-+ int flush_happened = 0;
-
- hdr = ((struct flat_hdr *) bprm->buf); /* exec-header */
- inode = bprm->file->f_path.dentry->d_inode;
-@@ -520,6 +526,7 @@ static int load_flat_file(struct linux_b
- /* OK, This is the point of no return */
- set_personality(PER_LINUX_32BIT);
- setup_new_exec(bprm);
-+ flush_happened = 1;
- }
-
- /*
-@@ -534,6 +541,12 @@ static int load_flat_file(struct linux_b
- * it all together.
- */
- if ((flags & (FLAT_FLAG_RAM|FLAT_FLAG_GZIP)) == 0) {
-+
-+#ifdef ARCH_FLAT_ALIGN_TEXT
-+ printk("Unable to mmap rom with ARCH alignment requirements\n");
-+ ret = -ENOEXEC;
-+ goto err;
-+#endif
- /*
- * this should give us a ROM ptr, but if it doesn't we don't
- * really care
-@@ -552,7 +565,7 @@ static int load_flat_file(struct linux_b
- goto err;
- }
-
-- len = data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
-+ len = data_len + extra + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), FLAT_DATA_ALIGN);
- len = PAGE_ALIGN(len);
- down_write(¤t->mm->mmap_sem);
- realdatastart = do_mmap(0, 0, len,
-@@ -571,6 +584,7 @@ static int load_flat_file(struct linux_b
- datapos = ALIGN(realdatastart +
- MAX_SHARED_LIBS * sizeof(unsigned long),
- FLAT_DATA_ALIGN);
-+ //datapos = realdatastart + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN);
-
- DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n",
- (int)(data_len + bss_len + stack_len), (int)datapos);
-@@ -599,7 +613,11 @@ static int load_flat_file(struct linux_b
- memp_size = len;
- } else {
-
-- len = text_len + data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
-+ len = text_len + data_len + extra + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), FLAT_DATA_ALIGN);
-+#ifdef ARCH_FLAT_ALIGN_TEXT
-+ /* Reserve space for the text alignment. */
-+ len += FLAT_DATA_ALIGN;
-+#endif
- len = PAGE_ALIGN(len);
- down_write(¤t->mm->mmap_sem);
- textpos = do_mmap(0, 0, len,
-@@ -615,10 +633,17 @@ static int load_flat_file(struct linux_b
- goto err;
- }
-
-+ memp = textpos;
-+#ifdef ARCH_FLAT_ALIGN_TEXT
-+ textpos = ALIGN(textpos + sizeof(struct flat_hdr), FLAT_DATA_ALIGN) - sizeof(struct flat_hdr);
-+#endif
- realdatastart = textpos + ntohl(hdr->data_start);
- datapos = ALIGN(realdatastart +
- MAX_SHARED_LIBS * sizeof(unsigned long),
- FLAT_DATA_ALIGN);
-+// datapos = realdatastart + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN);
-+// reloc = (unsigned long *) (textpos + ntohl(hdr->reloc_start) +
-+// ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN));
-
- reloc = (unsigned long *)
- (datapos + (ntohl(hdr->reloc_start) - text_len));
-@@ -658,7 +683,7 @@ static int load_flat_file(struct linux_b
- }
- if (IS_ERR_VALUE(result)) {
- printk("Unable to read code+data+bss, errno %d\n",(int)-result);
-- do_munmap(current->mm, textpos, text_len + data_len + extra +
-+ do_munmap(current->mm, memp, text_len + data_len + extra +
- MAX_SHARED_LIBS * sizeof(unsigned long));
- ret = result;
- goto err;
-@@ -671,6 +696,9 @@ static int load_flat_file(struct linux_b
-
- /* The main program needs a little extra setup in the task structure */
- start_code = textpos + sizeof (struct flat_hdr);
-+#ifdef ARCH_FLAT_ALIGN_TEXT
-+ BUG_ON(ALIGN(start_code, FLAT_DATA_ALIGN) != start_code);
-+#endif
- end_code = textpos + text_len;
- if (id == 0) {
- current->mm->start_code = start_code;
-@@ -799,6 +827,13 @@ static int load_flat_file(struct linux_b
-
- return 0;
- err:
-+ if (flush_happened) {
-+ /*
-+ * The parent process has already started running. We cannot allow the child to return back to user space
-+ * as this child is still uning the parent stack and 2 will clobber each other. We are going to kill this child.
-+ */
-+ do_exit(SIGTERM);
-+ }
- return ret;
- }
-
---- a/fs/Kconfig.binfmt
-+++ b/fs/Kconfig.binfmt
-@@ -30,7 +30,7 @@ config COMPAT_BINFMT_ELF
- config BINFMT_ELF_FDPIC
- bool "Kernel support for FDPIC ELF binaries"
- default y
-- depends on (FRV || BLACKFIN || (SUPERH32 && !MMU))
-+ depends on (FRV || BLACKFIN || (SUPERH32 && !MMU) || UBICOM32)
- help
- ELF FDPIC binaries are based on ELF, but allow the individual load
- segments of a binary to be located in memory independently of each
---- a/include/asm-generic/resource.h
-+++ b/include/asm-generic/resource.h
-@@ -69,13 +69,16 @@
- /*
- * boot-time rlimit defaults for the init task:
- */
-+#ifndef CONFIG_ELF_CORE
-+#define CONFIG_USER_ELF_CORE_SIZE 0
-+#endif
- #define INIT_RLIMITS \
- { \
- [RLIMIT_CPU] = { RLIM_INFINITY, RLIM_INFINITY }, \
- [RLIMIT_FSIZE] = { RLIM_INFINITY, RLIM_INFINITY }, \
- [RLIMIT_DATA] = { RLIM_INFINITY, RLIM_INFINITY }, \
- [RLIMIT_STACK] = { _STK_LIM, _STK_LIM_MAX }, \
-- [RLIMIT_CORE] = { 0, RLIM_INFINITY }, \
-+ [RLIMIT_CORE] = { CONFIG_USER_ELF_CORE_SIZE, RLIM_INFINITY }, \
- [RLIMIT_RSS] = { RLIM_INFINITY, RLIM_INFINITY }, \
- [RLIMIT_NPROC] = { 0, 0 }, \
- [RLIMIT_NOFILE] = { INR_OPEN, INR_OPEN }, \
---- a/include/linux/elf-em.h
-+++ b/include/linux/elf-em.h
-@@ -41,6 +41,7 @@
- * up with a final number.
- */
- #define EM_ALPHA 0x9026
-+#define EM_UBICOM32 0xde3d /* Ubicom32; no ABI */
-
- /* Bogus old v850 magic number, used by old tools. */
- #define EM_CYGNUS_V850 0x9080
---- a/include/linux/fb.h
-+++ b/include/linux/fb.h
-@@ -152,6 +152,10 @@ struct dentry;
- #define FB_ACCEL_PROSAVAGE_DDR 0x8d /* S3 ProSavage DDR */
- #define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */
-
-+#define FB_ACCEL_UBICOM32 0x0100 /* Ubicom32 */
-+#define FB_ACCEL_UBICOM32_VFB 0x0101 /* Ubicom32 VFB */
-+#define FB_ACCEL_UBICOM32_PLIO80 0x0102 /* Ubicom32 PLIO80 */
-+
- struct fb_fix_screeninfo {
- char id[16]; /* identification string eg "TT Builtin" */
- unsigned long smem_start; /* Start of frame buffer mem */
---- a/include/linux/if_ppp.h
-+++ b/include/linux/if_ppp.h
-@@ -114,14 +114,14 @@ struct pppol2tp_ioc_stats {
- __u16 tunnel_id; /* redundant */
- __u16 session_id; /* if zero, get tunnel stats */
- __u32 using_ipsec:1; /* valid only for session_id == 0 */
-- aligned_u64 tx_packets;
-- aligned_u64 tx_bytes;
-- aligned_u64 tx_errors;
-- aligned_u64 rx_packets;
-- aligned_u64 rx_bytes;
-- aligned_u64 rx_seq_discards;
-- aligned_u64 rx_oos_packets;
-- aligned_u64 rx_errors;
-+ __u64 tx_packets;
-+ __u64 tx_bytes;
-+ __u64 tx_errors;
-+ __u64 rx_packets;
-+ __u64 rx_bytes;
-+ __u64 rx_seq_discards;
-+ __u64 rx_oos_packets;
-+ __u64 rx_errors;
- };
-
- #define ifr__name b.ifr_ifrn.ifrn_name
---- a/include/linux/oprofile.h
-+++ b/include/linux/oprofile.h
-@@ -102,6 +102,8 @@ void oprofile_add_sample(struct pt_regs
- */
- void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
- unsigned long event, int is_kernel);
-+void oprofile_add_ext_sample_cpu(unsigned long pc, struct pt_regs * const regs,
-+ unsigned long event, int is_kernel, int cpu);
-
- /* Use this instead when the PC value is not from the regs. Doesn't
- * backtrace. */
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -179,6 +179,9 @@
- /* BCM63xx family SoCs */
- #define PORT_BCM63XX 89
-
-+/* Ubicom32 */
-+#define PORT_UBI32_UARTTIO 87
-+
- #ifdef __KERNEL__
-
- #include <linux/compiler.h>
---- a/include/linux/slab.h
-+++ b/include/linux/slab.h
-@@ -328,4 +328,14 @@ static inline void *kzalloc_node(size_t
-
- void __init kmem_cache_init_late(void);
-
-+struct kmem_cache_size_info {
-+ unsigned short page;
-+ unsigned short order;
-+};
-+
-+/*
-+ * get info on all the memory allocated by slab for this named cache
-+ */
-+extern int kmem_cache_block_info(char *name, struct kmem_cache_size_info *data, int max_data);
-+
- #endif /* _LINUX_SLAB_H */
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -844,6 +844,12 @@ config ELF_CORE
- help
- Enable support for generating core dumps. Disabling saves about 4k.
-
-+config USER_ELF_CORE_SIZE
-+ int "user core dump size (10MB to 32MB)"
-+ range 10485760 33554432
-+ default 16777216
-+ depends on ELF_CORE
-+
- config PCSPKR_PLATFORM
- bool "Enable PC-Speaker support" if EMBEDDED
- depends on ALPHA || X86 || MIPS || PPC_PREP || PPC_CHRP || PPC_PSERIES
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -2945,6 +2945,9 @@ static int m_show(struct seq_file *m, vo
- /* Used by oprofile and other similar tools. */
- seq_printf(m, " 0x%p", mod->module_core);
-
-+#ifdef ARCH_PROC_MODULES_EXTRA
-+ ARCH_PROC_MODULES_EXTRA(m, mod);
-+#endif
- /* Taints info */
- if (mod->taints)
- seq_printf(m, " %s", module_flags(mod, buf));
-@@ -3097,8 +3100,12 @@ void print_modules(void)
- printk(KERN_DEFAULT "Modules linked in:");
- /* Most callers should already have preempt disabled, but make sure */
- preempt_disable();
-- list_for_each_entry_rcu(mod, &modules, list)
-+ list_for_each_entry_rcu(mod, &modules, list) {
- printk(" %s%s", mod->name, module_flags(mod, buf));
-+#ifdef ARCH_OOPS_MODULE_EXTRA
-+ ARCH_OOPS_MODULE_EXTRA(mod);
-+#endif
-+ }
- preempt_enable();
- if (last_unloaded_module[0])
- printk(" [last unloaded: %s]", last_unloaded_module);
---- a/kernel/sched_clock.c
-+++ b/kernel/sched_clock.c
-@@ -38,8 +38,7 @@
- */
- unsigned long long __attribute__((weak)) sched_clock(void)
- {
-- return (unsigned long long)(jiffies - INITIAL_JIFFIES)
-- * (NSEC_PER_SEC / HZ);
-+ return (get_jiffies_64() - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ);
- }
-
- static __read_mostly int sched_clock_running;
---- a/lib/Kconfig.debug
-+++ b/lib/Kconfig.debug
-@@ -690,7 +690,7 @@ config FRAME_POINTER
- bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && \
- (CRIS || M68K || M68KNOMMU || FRV || UML || \
-- AVR32 || SUPERH || BLACKFIN || MN10300) || \
-+ AVR32 || SUPERH || BLACKFIN || MN10300 || UBICOM32) || \
- ARCH_WANT_FRAME_POINTERS
- default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
- help
---- a/mm/Makefile
-+++ b/mm/Makefile
-@@ -45,3 +45,5 @@ obj-$(CONFIG_MEMORY_FAILURE) += memory-f
- obj-$(CONFIG_HWPOISON_INJECT) += hwpoison-inject.o
- obj-$(CONFIG_DEBUG_KMEMLEAK) += kmemleak.o
- obj-$(CONFIG_DEBUG_KMEMLEAK_TEST) += kmemleak-test.o
-+
-+CFLAGS_slab.o := $(PROFILING) -O2
---- a/mm/slab.c
-+++ b/mm/slab.c
-@@ -4086,6 +4086,68 @@ out:
-
- #ifdef CONFIG_SLABINFO
-
-+
-+/*
-+ * get info on all the memory allocated by slab for this named cache
-+ */
-+int kmem_cache_block_info(char *name, struct kmem_cache_size_info *data, int max_data)
-+{
-+ int res = 0;
-+ int found = 0;
-+ int node;
-+ struct kmem_cache *cachep;
-+ struct kmem_list3 *l3;
-+ struct slab *slabp;
-+
-+ /* Find the cache in the chain of caches. */
-+ mutex_lock(&cache_chain_mutex);
-+ list_for_each_entry(cachep, &cache_chain, next) {
-+ if (strcmp(cachep->name, name) == 0) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+ mutex_unlock(&cache_chain_mutex);
-+ if (!found) {
-+ return 0;
-+ }
-+ for_each_online_node(node) {
-+ l3 = cachep->nodelists[node];
-+ if (!l3)
-+ continue;
-+ if (res >= max_data)
-+ break;
-+ check_irq_on();
-+ spin_lock_irq(&l3->list_lock);
-+
-+ list_for_each_entry(slabp, &l3->slabs_full, list) {
-+ if (res >= max_data)
-+ break;
-+ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
-+ data[res].order = cachep->gfporder;
-+ res++;
-+ }
-+ list_for_each_entry(slabp, &l3->slabs_partial, list) {
-+ if (res >= max_data)
-+ break;
-+ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
-+ data[res].order = cachep->gfporder;
-+ res++;
-+ }
-+ list_for_each_entry(slabp, &l3->slabs_free, list) {
-+ if (res >= max_data)
-+ break;
-+ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
-+ data[res].order = cachep->gfporder;
-+ res++;
-+ }
-+
-+ spin_unlock_irq(&l3->list_lock);
-+ }
-+
-+ return res;
-+}
-+
- static void print_slabinfo_header(struct seq_file *m)
- {
- /*
---- a/scripts/mod/file2alias.c
-+++ b/scripts/mod/file2alias.c
-@@ -783,6 +783,15 @@ void handle_moddevtable(struct module *m
- + sym->st_value;
- }
-
-+ /*
-+ * somehow our gcc is not generating st_size correctly and set 0 for some symbols.
-+ * and 0 size will break do_table since it adjust size to (size - id_size)
-+ * this is to make sure st_size fall in range.
-+ */
-+ if (sym->st_size == 0 || sym->st_size > info->sechdrs[sym->st_shndx].sh_size) {
-+ sym->st_size = info->sechdrs[sym->st_shndx].sh_size;
-+ }
-+
- if (sym_is(symname, "__mod_pci_device_table"))
- do_table(symval, sym->st_size,
- sizeof(struct pci_device_id), "pci",
---- a/sound/Kconfig
-+++ b/sound/Kconfig
-@@ -110,6 +110,8 @@ source "sound/parisc/Kconfig"
-
- source "sound/soc/Kconfig"
-
-+source "sound/ubicom32/Kconfig"
-+
- endif # SND
-
- menuconfig SOUND_PRIME
---- a/sound/Makefile
-+++ b/sound/Makefile
-@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmw
- obj-$(CONFIG_SOUND_PRIME) += oss/
- obj-$(CONFIG_DMASOUND) += oss/
- obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
-- sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/
-+ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ ubicom32/
- obj-$(CONFIG_SND_AOA) += aoa/
-
- # This one must be compilable even if sound is configured out
+++ /dev/null
---- a/arch/ubicom32/kernel/vmlinux.lds.S
-+++ b/arch/ubicom32/kernel/vmlinux.lds.S
-@@ -25,7 +25,6 @@
- * arch/blackfin
- * arch/parisc
- */
--#include <asm-generic/vmlinux.lds.h>
- #include <asm/ocm_size.h>
- #include <asm/memory_map.h>
- #include <asm/thread_info.h>
-@@ -201,94 +200,28 @@ SECTIONS {
- *(__ex_table)
- __stop___ex_table = .;
-
-- *(.rodata) *(.rodata.*)
-- *(__vermagic) /* Kernel version magic */
-- *(__markers_strings)
-- *(.rodata1)
-- *(.rodata.str1.1)
-- *(__tracepoints_strings)
--
-- /* PCI quirks */
-- __start_pci_fixups_early = . ;
-- *(.pci_fixup_early)
-- __end_pci_fixups_early = . ;
-- __start_pci_fixups_header = . ;
-- *(.pci_fixup_header)
-- __end_pci_fixups_header = . ;
-- __start_pci_fixups_final = . ;
-- *(.pci_fixup_final)
-- __end_pci_fixups_final = . ;
-- __start_pci_fixups_enable = . ;
-- *(.pci_fixup_enable)
-- __end_pci_fixups_enable = . ;
-- __start_pci_fixups_resume = . ;
-- *(.pci_fixup_resume)
-- __end_pci_fixups_resume = . ;
-- __start_pci_fixups_resume_early = . ;
-- *(.pci_fixup_resume_early)
-- __end_pci_fixups_resume_early = . ;
-- __start_pci_fixups_suspend = . ;
-- *(.pci_fixup_suspend)
-- __end_pci_fixups_suspend = . ;
--
-- __start_builtin_fw = . ;
-- *(.builtin_fw)
-- __end_builtin_fw = . ;
--
--
-- /* Kernel symbol table: Normal symbols */
-- . = ALIGN(4);
-- __start___ksymtab = .;
-- *(__ksymtab)
-- __stop___ksymtab = .;
--
-- /* Kernel symbol table: GPL-only symbols */
-- __start___ksymtab_gpl = .;
-- *(__ksymtab_gpl)
-- __stop___ksymtab_gpl = .;
--
-- /* Kernel symbol table: Normal unused symbols */
-- __start___ksymtab_unused = .;
-- *(__ksymtab_unused)
-- __stop___ksymtab_unused = .;
--
-- /* Kernel symbol table: GPL-only unused symbols */
-- __start___ksymtab_unused_gpl = .;
-- *(__ksymtab_unused_gpl)
-- __stop___ksymtab_unused_gpl = .;
--
-- /* Kernel symbol table: GPL-future symbols */
-- __start___ksymtab_gpl_future = .;
-- *(__ksymtab_gpl_future)
-- __stop___ksymtab_gpl_future = .;
--
-- /* Kernel symbol table: Normal symbols */
-- __start___kcrctab = .;
-- *(__kcrctab)
-- __stop___kcrctab = .;
--
-- /* Kernel symbol table: GPL-only symbols */
-- __start___kcrctab_gpl = .;
-- *(__kcrctab_gpl)
-- __stop___kcrctab_gpl = .;
--
-- /* Kernel symbol table: GPL-future symbols */
-- __start___kcrctab_gpl_future = .;
-- *(__kcrctab_gpl_future)
-- __stop___kcrctab_gpl_future = .;
-+ } > TEXT
-
-- /* Kernel symbol table: strings */
-- *(__ksymtab_strings)
-+ RO_DATA(16)
-
-- /* Built-in module parameters */
-- . = ALIGN(4) ;
-- __start___param = .;
-- *(__param)
-- __stop___param = .;
-+ .rodata : {} > TEXT
-+ .rodata1 : {} > TEXT
-+ .pci_fixup : {} > TEXT
-+ .builtin_fw : {} > TEXT
-+ .rio_route : {} > TEXT
-+ .tracedata : {} > TEXT
-+ __ksymtab : {} > TEXT
-+ __ksymtab_gpl : {} > TEXT
-+ __ksymtab_gpl_future : {} > TEXT
-+ __kcrctab_gpl : {} > TEXT
-+ __kcrctab_unused : {} > TEXT
-+ __kcrctab_unused_gpl : {} > TEXT
-+ __kcrctab_gpl_future : {} > TEXT
-+ __ksymtab_strings : {} > TEXT
-+ __init_rodata : {} > TEXT
-+ __param : {} > TEXT
-
-- . = ALIGN(4) ;
-- _etext = . ;
-- } > TEXT
-+ _etext = .;
-
- .data DATA_ADDR : {
- . = ALIGN(4);
-@@ -349,12 +282,6 @@ SECTIONS {
- PROVIDE (___eh_frame_end = .);
- } > INIT
-
-- /DISCARD/ : {
-- EXIT_TEXT
-- EXIT_DATA
-- *(.exitcall.exit)
-- }
--
- .bss : {
- . = ALIGN(4);
- _sbss = . ;
-@@ -365,6 +292,12 @@ SECTIONS {
- _end = . ;
- } > BSS
-
-+ /DISCARD/ : {
-+ EXIT_TEXT
-+ EXIT_DATA
-+ *(.exitcall.exit)
-+ }
-+
- NOTES > BSS
-
- }
+++ /dev/null
---- a/arch/ubicom32/Makefile
-+++ b/arch/ubicom32/Makefile
-@@ -60,9 +60,6 @@ cflags-$(CONFIG_UBICOM32_V4) := -march=
- ldflags-$(CONFIG_LINKER_RELAXATION) := --relax
- LDFLAGS_vmlinux := $(ldflags-y)
-
--GCCLIBDIR := $(dir $(shell $(CC) $(cflags-y) -print-libgcc-file-name))
--GCC_LIBS := $(GCCLIBDIR)/libgcc.a
--
- KBUILD_CFLAGS += $(cflags-y) -ffunction-sections
- KBUILD_AFLAGS += $(cflags-y)
-
-@@ -84,7 +81,6 @@ core-y += arch/$(ARCH)/kernel/ \
- drivers-$(CONFIG_OPROFILE) += arch/ubicom32/oprofile/
-
- libs-y += arch/$(ARCH)/lib/
--libs-y += $(GCC_LIBS)
-
- archclean:
-
---- a/arch/ubicom32/lib/Makefile
-+++ b/arch/ubicom32/lib/Makefile
-@@ -30,3 +30,4 @@
- #
-
- lib-y := checksum.o delay.o mem_ubicom32.o
-+lib-y += ashldi3.o ashrdi3.o divmod.o lshrdi3.o muldi3.o
---- /dev/null
-+++ b/arch/ubicom32/lib/ashldi3.c
-@@ -0,0 +1,62 @@
-+/* ashrdi3.c extracted from gcc-2.95.2/libgcc2.c which is: */
-+/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-+
-+This file is part of GNU CC.
-+
-+GNU CC is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2, or (at your option)
-+any later version.
-+
-+GNU CC is distributed in the hope that it will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with GNU CC; see the file COPYING. If not, write to
-+the Free Software Foundation, 59 Temple Place - Suite 330,
-+Boston, MA 02111-1307, USA. */
-+
-+#define BITS_PER_UNIT 8
-+
-+typedef int SItype __attribute__ ((mode (SI)));
-+typedef unsigned int USItype __attribute__ ((mode (SI)));
-+typedef int DItype __attribute__ ((mode (DI)));
-+typedef int word_type __attribute__ ((mode (__word__)));
-+
-+struct DIstruct {SItype high, low;};
-+
-+typedef union
-+{
-+ struct DIstruct s;
-+ DItype ll;
-+} DIunion;
-+
-+DItype
-+__ashldi3 (DItype u, word_type b)
-+{
-+ DIunion w;
-+ word_type bm;
-+ DIunion uu;
-+
-+ if (b == 0)
-+ return u;
-+
-+ uu.ll = u;
-+
-+ bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-+ if (bm <= 0)
-+ {
-+ w.s.low = 0;
-+ w.s.high = (USItype)uu.s.low << -bm;
-+ }
-+ else
-+ {
-+ USItype carries = (USItype)uu.s.low >> bm;
-+ w.s.low = (USItype)uu.s.low << b;
-+ w.s.high = ((USItype)uu.s.high << b) | carries;
-+ }
-+
-+ return w.ll;
-+}
---- /dev/null
-+++ b/arch/ubicom32/lib/ashrdi3.c
-@@ -0,0 +1,63 @@
-+/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-+
-+This file is part of GNU CC.
-+
-+GNU CC is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2, or (at your option)
-+any later version.
-+
-+GNU CC is distributed in the hope that it will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with GNU CC; see the file COPYING. If not, write to
-+the Free Software Foundation, 59 Temple Place - Suite 330,
-+Boston, MA 02111-1307, USA. */
-+
-+#define BITS_PER_UNIT 8
-+
-+typedef int SItype __attribute__ ((mode (SI)));
-+typedef unsigned int USItype __attribute__ ((mode (SI)));
-+typedef int DItype __attribute__ ((mode (DI)));
-+typedef int word_type __attribute__ ((mode (__word__)));
-+
-+struct DIstruct {SItype high, low;};
-+
-+typedef union
-+{
-+ struct DIstruct s;
-+ DItype ll;
-+} DIunion;
-+
-+DItype
-+__ashrdi3 (DItype u, word_type b)
-+{
-+ DIunion w;
-+ word_type bm;
-+ DIunion uu;
-+
-+ if (b == 0)
-+ return u;
-+
-+ uu.ll = u;
-+
-+ bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-+ if (bm <= 0)
-+ {
-+ /* w.s.high = 1..1 or 0..0 */
-+ w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1);
-+ w.s.low = uu.s.high >> -bm;
-+ }
-+ else
-+ {
-+ USItype carries = (USItype)uu.s.high << bm;
-+ w.s.high = uu.s.high >> b;
-+ w.s.low = ((USItype)uu.s.low >> b) | carries;
-+ }
-+
-+ return w.ll;
-+}
---- /dev/null
-+++ b/arch/ubicom32/lib/divmod.c
-@@ -0,0 +1,85 @@
-+unsigned long
-+udivmodsi4(unsigned long num, unsigned long den, int modwanted)
-+{
-+ unsigned long bit = 1;
-+ unsigned long res = 0;
-+
-+ while (den < num && bit && !(den & (1L<<31)))
-+ {
-+ den <<=1;
-+ bit <<=1;
-+ }
-+ while (bit)
-+ {
-+ if (num >= den)
-+ {
-+ num -= den;
-+ res |= bit;
-+ }
-+ bit >>=1;
-+ den >>=1;
-+ }
-+ if (modwanted) return num;
-+ return res;
-+}
-+
-+long
-+__udivsi3 (long a, long b)
-+{
-+ return udivmodsi4 (a, b, 0);
-+}
-+
-+long
-+__umodsi3 (long a, long b)
-+{
-+ return udivmodsi4 (a, b, 1);
-+}
-+
-+long
-+__divsi3 (long a, long b)
-+{
-+ int neg = 0;
-+ long res;
-+
-+ if (a < 0)
-+ {
-+ a = -a;
-+ neg = !neg;
-+ }
-+
-+ if (b < 0)
-+ {
-+ b = -b;
-+ neg = !neg;
-+ }
-+
-+ res = udivmodsi4 (a, b, 0);
-+
-+ if (neg)
-+ res = -res;
-+
-+ return res;
-+}
-+
-+long
-+__modsi3 (long a, long b)
-+{
-+ int neg = 0;
-+ long res;
-+
-+ if (a < 0)
-+ {
-+ a = -a;
-+ neg = 1;
-+ }
-+
-+ if (b < 0)
-+ b = -b;
-+
-+ res = udivmodsi4 (a, b, 1);
-+
-+ if (neg)
-+ res = -res;
-+
-+ return res;
-+}
---- /dev/null
-+++ b/arch/ubicom32/lib/lshrdi3.c
-@@ -0,0 +1,62 @@
-+/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-+
-+This file is part of GNU CC.
-+
-+GNU CC is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2, or (at your option)
-+any later version.
-+
-+GNU CC is distributed in the hope that it will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with GNU CC; see the file COPYING. If not, write to
-+the Free Software Foundation, 59 Temple Place - Suite 330,
-+Boston, MA 02111-1307, USA. */
-+
-+#define BITS_PER_UNIT 8
-+
-+typedef int SItype __attribute__ ((mode (SI)));
-+typedef unsigned int USItype __attribute__ ((mode (SI)));
-+typedef int DItype __attribute__ ((mode (DI)));
-+typedef int word_type __attribute__ ((mode (__word__)));
-+
-+struct DIstruct {SItype high, low;};
-+
-+typedef union
-+{
-+ struct DIstruct s;
-+ DItype ll;
-+} DIunion;
-+
-+DItype
-+__lshrdi3 (DItype u, word_type b)
-+{
-+ DIunion w;
-+ word_type bm;
-+ DIunion uu;
-+
-+ if (b == 0)
-+ return u;
-+
-+ uu.ll = u;
-+
-+ bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-+ if (bm <= 0)
-+ {
-+ w.s.high = 0;
-+ w.s.low = (USItype)uu.s.high >> -bm;
-+ }
-+ else
-+ {
-+ USItype carries = (USItype)uu.s.high << bm;
-+ w.s.high = (USItype)uu.s.high >> b;
-+ w.s.low = ((USItype)uu.s.low >> b) | carries;
-+ }
-+
-+ return w.ll;
-+}
---- /dev/null
-+++ b/arch/ubicom32/lib/muldi3.c
-@@ -0,0 +1,87 @@
-+/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and
-+ gcc-2.7.2.3/longlong.h which is: */
-+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-+
-+This file is part of GNU CC.
-+
-+GNU CC is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2, or (at your option)
-+any later version.
-+
-+GNU CC is distributed in the hope that it will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with GNU CC; see the file COPYING. If not, write to
-+the Free Software Foundation, 59 Temple Place - Suite 330,
-+Boston, MA 02111-1307, USA. */
-+
-+#define UWtype USItype
-+#define UHWtype USItype
-+#define W_TYPE_SIZE 32
-+#define __BITS4 (W_TYPE_SIZE / 4)
-+#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
-+#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
-+#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
-+
-+#define umul_ppmm(w1, w0, u, v) \
-+ do { \
-+ UWtype __x0, __x1, __x2, __x3; \
-+ UHWtype __ul, __vl, __uh, __vh; \
-+ \
-+ __ul = __ll_lowpart (u); \
-+ __uh = __ll_highpart (u); \
-+ __vl = __ll_lowpart (v); \
-+ __vh = __ll_highpart (v); \
-+ \
-+ __x0 = (UWtype) __ul * __vl; \
-+ __x1 = (UWtype) __ul * __vh; \
-+ __x2 = (UWtype) __uh * __vl; \
-+ __x3 = (UWtype) __uh * __vh; \
-+ \
-+ __x1 += __ll_highpart (__x0);/* this can't give carry */ \
-+ __x1 += __x2; /* but this indeed can */ \
-+ if (__x1 < __x2) /* did we get it? */ \
-+ __x3 += __ll_B; /* yes, add it in the proper pos. */ \
-+ \
-+ (w1) = __x3 + __ll_highpart (__x1); \
-+ (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \
-+ } while (0)
-+
-+
-+#define __umulsidi3(u, v) \
-+ ({DIunion __w; \
-+ umul_ppmm (__w.s.high, __w.s.low, u, v); \
-+ __w.ll; })
-+
-+typedef int SItype __attribute__ ((mode (SI)));
-+typedef unsigned int USItype __attribute__ ((mode (SI)));
-+typedef int DItype __attribute__ ((mode (DI)));
-+typedef int word_type __attribute__ ((mode (__word__)));
-+
-+struct DIstruct {SItype high, low;};
-+
-+typedef union
-+{
-+ struct DIstruct s;
-+ DItype ll;
-+} DIunion;
-+
-+DItype
-+__muldi3 (DItype u, DItype v)
-+{
-+ DIunion w;
-+ DIunion uu, vv;
-+
-+ uu.ll = u,
-+ vv.ll = v;
-+
-+ w.ll = __umulsidi3 (uu.s.low, vv.s.low);
-+ w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
-+ + (USItype) uu.s.high * (USItype) vv.s.low);
-+
-+ return w.ll;
-+}
---- a/arch/ubicom32/kernel/ubicom32_ksyms.c
-+++ b/arch/ubicom32/kernel/ubicom32_ksyms.c
-@@ -72,7 +72,6 @@ EXPORT_SYMBOL(memmove);
- extern void __ashldi3(void);
- extern void __ashrdi3(void);
- extern void __divsi3(void);
--extern void __divdi3(void);
- extern void __lshrdi3(void);
- extern void __modsi3(void);
- extern void __muldi3(void);
-@@ -83,7 +82,6 @@ extern void __umodsi3(void);
- EXPORT_SYMBOL(__ashldi3);
- EXPORT_SYMBOL(__ashrdi3);
- EXPORT_SYMBOL(__divsi3);
--EXPORT_SYMBOL(__divdi3);
- EXPORT_SYMBOL(__lshrdi3);
- EXPORT_SYMBOL(__modsi3);
- EXPORT_SYMBOL(__muldi3);
+++ /dev/null
---- a/drivers/mtd/devices/ubi32-m25p80.c
-+++ b/drivers/mtd/devices/ubi32-m25p80.c
-@@ -630,8 +630,8 @@ static int ubicom32_flash_driver_erase(s
- /* sanity checks */
- if (instr->addr + instr->len > flash->mtd.size)
- return -EINVAL;
-- if ((instr->addr % mtd->erasesize) != 0
-- || (instr->len % mtd->erasesize) != 0) {
-+ if (((u32) instr->addr % mtd->erasesize) != 0
-+ || ((u32) instr->len % mtd->erasesize) != 0) {
- return -EINVAL;
- }
-
+++ /dev/null
---- a/arch/ubicom32/Makefile
-+++ b/arch/ubicom32/Makefile
-@@ -54,8 +54,8 @@ CFLAGS_MODULE += -mno-fastcall
- #
- # Some CFLAG additions based on specific CPU type.
- #
--cflags-$(CONFIG_UBICOM32_V3) := -march=ubicom32v3 -DIP5000
--cflags-$(CONFIG_UBICOM32_V4) := -march=ubicom32v4 -DIP7000
-+cflags-$(CONFIG_UBICOM32_V3) := -march=ubicom32v3 -mno-fdpic -DIP5000
-+cflags-$(CONFIG_UBICOM32_V4) := -march=ubicom32v4 -mno-fdpic -DIP7000
-
- ldflags-$(CONFIG_LINKER_RELAXATION) := --relax
- LDFLAGS_vmlinux := $(ldflags-y)
projects / openwrt / staging / adrian.git / commitdiff