--- /dev/null
+From 5fcded5e857cf66c9592e4be28c4dab4520c9177 Mon Sep 17 00:00:00 2001
+From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Date: Thu, 9 Apr 2020 13:16:52 +0200
+Subject: [PATCH] staging: mt7621-pci: properly power off dual-ported pcie phy
+
+Pcie phy for pcie0 and pcie1 is shared using a dual ported
+one. Current code was assuming that if nothing is connected
+in pcie0 it won't be also nothing connected in pcie1. This
+assumtion is wrong for some devices such us 'Mikrotik rbm33g'
+and 'ZyXEL LTE3301-PLUS' where only connecting a card to the
+second bus on the phy is possible. For such devices kernel
+hangs in the same point because of the wrong poweroff of the
+phy getting the following trace:
+
+mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
+mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
+mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
+mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
+mt7621-pci 1e140000.pcie: pcie0 no card, disable it (RST & CLK)
+[hangs]
+
+The wrong assumption is located in the 'mt7621_pcie_init_ports'
+function where we are just making a power off of the phy for
+slots 0 and 2 if nothing is connected in them. Hence, only
+poweroff the phy if nothing is connected in both slot 0 and
+slot 1 avoiding the kernel to hang.
+
+Fixes: 5737cfe87a9c ("staging: mt7621-pci: avoid to poweroff the phy for slot one")
+Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Link: https://lore.kernel.org/r/20200409111652.30964-1-sergio.paracuellos@gmail.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/staging/mt7621-pci/pci-mt7621.c | 12 ++++++++++--
+ 1 file changed, 10 insertions(+), 2 deletions(-)
+
+--- a/drivers/staging/mt7621-pci/pci-mt7621.c
++++ b/drivers/staging/mt7621-pci/pci-mt7621.c
+@@ -502,17 +502,25 @@ static void mt7621_pcie_init_ports(struc
+
+ mt7621_pcie_reset_ep_deassert(pcie);
+
++ tmp = NULL;
+ list_for_each_entry(port, &pcie->ports, list) {
+ u32 slot = port->slot;
+
+ if (!mt7621_pcie_port_is_linkup(port)) {
+ dev_err(dev, "pcie%d no card, disable it (RST & CLK)\n",
+ slot);
+- if (slot != 1)
+- phy_power_off(port->phy);
+ mt7621_control_assert(port);
+ mt7621_pcie_port_clk_disable(port);
+ port->enabled = false;
++
++ if (slot == 0) {
++ tmp = port;
++ continue;
++ }
++
++ if (slot == 1 && tmp && !tmp->enabled)
++ phy_power_off(tmp->phy);
++
+ }
+ }
+ }
--- /dev/null
+From fab6710e4c51f4eb622f95a08322ab5fdbe3f295 Mon Sep 17 00:00:00 2001
+From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Date: Mon, 13 Apr 2020 07:59:42 +0200
+Subject: [PATCH] staging: mt7621-pci: fix PCIe interrupt mapping
+
+MT7621 has three assigned interrupts for the pcie. This
+interrupts should properly being mapped taking into account
+which devices are finally connected in which bus according
+to link status. So the irq mappings should be as follows
+according to link status (three bits indicating which devices
+are link up):
+
+* For PCIe Bus 1 slot 0:
+ - status = 0x2 || status = 0x6 => IRQ = pcie1_irq (24).
+ - status = 0x4 => IRQ = pcie2_irq (25).
+ - default => IRQ = pcie0_irq (23).
+* For PCIe Bus 2 slot 0:
+ - status = 0x5 || status = 0x6 => IRQ = pcie2_irq (25).
+ - default => IRQ = pcie1_irq (24).
+* For PCIe Bus 2 slot 1:
+ - status = 0x5 || status = 0x6 => IRQ = pcie2_irq (25).
+ - default => IRQ = pcie1_irq (24).
+* For PCIe Bus 3 any slot:
+ - default => IRQ = pcie2_irq (25).
+
+Because of this, the function 'of_irq_parse_and_map_pci' cannot
+be used and we need to change device tree information from using
+the 'interrupt-map' and 'interrupt-map-mask' properties into an
+'interrupts' property to be able to get irq information from the
+ports using the 'platform_get_irq' and storing an 'irq-map' into
+the pcie driver data node to properly map correct irq using a
+new 'mt7621_map_irq' function where this map will be read and the
+correct irq returned.
+
+Fixes: 46d093124df4 ("staging: mt7621-pci: improve interrupt mapping")
+Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Link: https://lore.kernel.org/r/20200413055942.2714-1-sergio.paracuellos@gmail.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/staging/mt7621-dts/mt7621.dtsi | 9 +++----
+ drivers/staging/mt7621-pci/pci-mt7621.c | 36 +++++++++++++++++++++++--
+ 2 files changed, 38 insertions(+), 7 deletions(-)
+
+--- a/drivers/staging/mt7621-pci/pci-mt7621.c
++++ b/drivers/staging/mt7621-pci/pci-mt7621.c
+@@ -97,6 +97,7 @@
+ * @pcie_rst: pointer to port reset control
+ * @gpio_rst: gpio reset
+ * @slot: port slot
++ * @irq: GIC irq
+ * @enabled: indicates if port is enabled
+ */
+ struct mt7621_pcie_port {
+@@ -107,6 +108,7 @@ struct mt7621_pcie_port {
+ struct reset_control *pcie_rst;
+ struct gpio_desc *gpio_rst;
+ u32 slot;
++ int irq;
+ bool enabled;
+ };
+
+@@ -120,6 +122,7 @@ struct mt7621_pcie_port {
+ * @dev: Pointer to PCIe device
+ * @io_map_base: virtual memory base address for io
+ * @ports: pointer to PCIe port information
++ * @irq_map: irq mapping info according pcie link status
+ * @resets_inverted: depends on chip revision
+ * reset lines are inverted.
+ */
+@@ -135,6 +138,7 @@ struct mt7621_pcie {
+ } offset;
+ unsigned long io_map_base;
+ struct list_head ports;
++ int irq_map[PCIE_P2P_MAX];
+ bool resets_inverted;
+ };
+
+@@ -279,6 +283,16 @@ static void setup_cm_memory_region(struc
+ }
+ }
+
++static int mt7621_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
++{
++ struct mt7621_pcie *pcie = pdev->bus->sysdata;
++ struct device *dev = pcie->dev;
++ int irq = pcie->irq_map[slot];
++
++ dev_info(dev, "bus=%d slot=%d irq=%d\n", pdev->bus->number, slot, irq);
++ return irq;
++}
++
+ static int mt7621_pci_parse_request_of_pci_ranges(struct mt7621_pcie *pcie)
+ {
+ struct device *dev = pcie->dev;
+@@ -330,6 +344,7 @@ static int mt7621_pcie_parse_port(struct
+ {
+ struct mt7621_pcie_port *port;
+ struct device *dev = pcie->dev;
++ struct platform_device *pdev = to_platform_device(dev);
+ struct device_node *pnode = dev->of_node;
+ struct resource regs;
+ char name[10];
+@@ -371,6 +386,12 @@ static int mt7621_pcie_parse_port(struct
+ port->slot = slot;
+ port->pcie = pcie;
+
++ port->irq = platform_get_irq(pdev, slot);
++ if (port->irq < 0) {
++ dev_err(dev, "Failed to get IRQ for PCIe%d\n", slot);
++ return -ENXIO;
++ }
++
+ INIT_LIST_HEAD(&port->list);
+ list_add_tail(&port->list, &pcie->ports);
+
+@@ -585,13 +606,15 @@ static int mt7621_pcie_init_virtual_brid
+ {
+ u32 pcie_link_status = 0;
+ u32 n;
+- int i;
++ int i = 0;
+ u32 p2p_br_devnum[PCIE_P2P_MAX];
++ int irqs[PCIE_P2P_MAX];
+ struct mt7621_pcie_port *port;
+
+ list_for_each_entry(port, &pcie->ports, list) {
+ u32 slot = port->slot;
+
++ irqs[i++] = port->irq;
+ if (port->enabled)
+ pcie_link_status |= BIT(slot);
+ }
+@@ -614,6 +637,15 @@ static int mt7621_pcie_init_virtual_brid
+ (p2p_br_devnum[1] << PCIE_P2P_BR_DEVNUM1_SHIFT) |
+ (p2p_br_devnum[2] << PCIE_P2P_BR_DEVNUM2_SHIFT));
+
++ /* Assign IRQs */
++ n = 0;
++ for (i = 0; i < PCIE_P2P_MAX; i++)
++ if (pcie_link_status & BIT(i))
++ pcie->irq_map[n++] = irqs[i];
++
++ for (i = n; i < PCIE_P2P_MAX; i++)
++ pcie->irq_map[i] = -1;
++
+ return 0;
+ }
+
+@@ -638,7 +670,7 @@ static int mt7621_pcie_register_host(str
+ host->busnr = pcie->busn.start;
+ host->dev.parent = pcie->dev;
+ host->ops = &mt7621_pci_ops;
+- host->map_irq = of_irq_parse_and_map_pci;
++ host->map_irq = mt7621_map_irq;
+ host->swizzle_irq = pci_common_swizzle;
+ host->sysdata = pcie;
+
projects / openwrt / staging / luka.git / commitdiff