environment area within the total memory of your DataFlash placed
at the specified address.
-- CFG_ENV_IS_IN_NAND:
+- CONFIG_ENV_IS_IN_NAND:
Define this if you have a NAND device which you want to use
for the environment.
!defined(CONFIG_ENV_IS_IN_EEPROM) && \
!defined(CFG_ENV_IS_IN_FLASH) && \
!defined(CONFIG_ENV_IS_IN_DATAFLASH) && \
- !defined(CFG_ENV_IS_IN_NAND) && \
+ !defined(CONFIG_ENV_IS_IN_NAND) && \
!defined(CFG_ENV_IS_IN_ONENAND) && \
!defined(CFG_ENV_IS_IN_SPI_FLASH) && \
!defined(CFG_ENV_IS_NOWHERE)
"\0"
};
-#if defined(CFG_ENV_IS_IN_NAND) /* Environment is in Nand Flash */ \
+#if defined(CONFIG_ENV_IS_IN_NAND) /* Environment is in Nand Flash */ \
|| defined(CFG_ENV_IS_IN_SPI_FLASH)
int default_environment_size = sizeof(default_environment);
#endif
#include <common.h>
-#if defined(CFG_ENV_IS_IN_NAND) /* Environment is in Nand Flash */
+#if defined(CONFIG_ENV_IS_IN_NAND) /* Environment is in Nand Flash */
#include <command.h>
#include <environment.h>
}
#endif
-#endif /* CFG_ENV_IS_IN_NAND */
+#endif /* CONFIG_ENV_IS_IN_NAND */
* Environment
*/
#if defined(CONFIG_NAND_U_BOOT)
- #define CFG_ENV_IS_IN_NAND 1
+ #define CONFIG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET (512 * 1024)
#define CFG_ENV_SECT_SIZE CFG_NAND_BLOCK_SIZE
#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CONFIG_ENV_IS_IN_EEPROM 1 /* use FLASH for environment vars */
#else
-#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
+#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
#endif
-#ifdef CFG_ENV_IS_IN_NAND
+#ifdef CONFIG_ENV_IS_IN_NAND
/*
* For NAND booting the environment is embedded in the U-Boot image. Please take
* look at the file board/amcc/sequoia/u-boot-nand.lds for details.
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#else
-#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
+#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
-#ifdef CFG_ENV_IS_IN_NAND
+#ifdef CONFIG_ENV_IS_IN_NAND
/*
* For NAND booting the environment is embedded in the U-Boot image. Please take
* look at the file board/amcc/sequoia/u-boot-nand.lds for details.
#else /* CFG_USE_NANDFLASH */
/* bootstrap + u-boot + env + linux in nandflash */
-#define CFG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x60000
#define CFG_ENV_OFFSET_REDUND 0x80000
#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
#else /* CFG_USE_NANDFLASH */
/* bootstrap + u-boot + env + linux in nandflash */
-#define CFG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x60000
#define CFG_ENV_OFFSET_REDUND 0x80000
#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
#else /* CFG_USE_NANDFLASH */
/* bootstrap + u-boot + env + linux in nandflash */
-#define CFG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x60000
#define CFG_ENV_OFFSET_REDUND 0x80000
#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
#else /* CFG_USE_NANDFLASH */
/* bootstrap + u-boot + env + linux in nandflash */
-#define CFG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x60000
#define CFG_ENV_OFFSET_REDUND 0x80000
#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#else
-#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
+#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
-#ifdef CFG_ENV_IS_IN_NAND
+#ifdef CONFIG_ENV_IS_IN_NAND
/*
* For NAND booting the environment is embedded in the U-Boot image. Please take
* look at the file board/amcc/sequoia/u-boot-nand.lds for details.
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#define CFG_NAND_CS 3 /* NAND chip connected to CSx */
#else
-#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
+#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
48, 49, 50, 51, 52, 53, 54, 55, \
56, 57, 58, 59, 60, 61, 62, 63}
-#ifdef CFG_ENV_IS_IN_NAND
+#ifdef CONFIG_ENV_IS_IN_NAND
/*
* For NAND booting the environment is embedded in the U-Boot image. Please take
* look at the file board/amcc/canyonlands/u-boot-nand.lds for details.
#ifdef CFG_USE_NAND
#undef CFG_ENV_IS_IN_FLASH
#define CFG_NO_FLASH
-#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#ifdef CFG_NAND_SMALLPAGE
#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */
#define CFG_ENV_SIZE SZ_16K
/*=====================*/
#undef CFG_ENV_IS_IN_FLASH
#define CFG_NO_FLASH
-#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */
#define CFG_ENV_SIZE SZ_128K
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
/* Flash & Environment */
#undef CFG_ENV_IS_IN_FLASH
#define CFG_NO_FLASH
-#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */
#define CFG_ENV_SIZE SZ_128K
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
#ifdef CFG_USE_NAND
#undef CFG_ENV_IS_IN_FLASH
#define CFG_NO_FLASH
-#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */
#define CFG_ENV_SIZE SZ_16K
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
#define CFG_NO_FLASH 1
-#define CFG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x40000
#define CFG_ENV_OFFSET_REDUND 0x44000
#define CFG_ENV_SIZE 0x4000
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#else
-#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
+#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
-#ifdef CFG_ENV_IS_IN_NAND
+#ifdef CONFIG_ENV_IS_IN_NAND
/*
* For NAND booting the environment is embedded in the U-Boot image. Please take
* look at the file board/amcc/sequoia/u-boot-nand.lds for details.
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE_1 }
#ifdef CFG_NAND_BOOT
-#define CFG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x80000 /* environment starts here */
#else
#define CFG_ENV_ADDR (CFG_FLASH_BASE + SZ_128K)
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environ vars */
#else
-#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environ vars */
+#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environ vars */
#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
-#ifdef CFG_ENV_IS_IN_NAND
+#ifdef CONFIG_ENV_IS_IN_NAND
/*
* For NAND booting the environment is embedded in the U-Boot image. Please take
* look at the file board/amcc/sequoia/u-boot-nand.lds for details.
*/
/* Settings as above boot configuration */
-#define CFG_ENV_IS_IN_NAND
+#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_BOOTARGS "console=ttySAC,115200"
#if !defined(CONFIG_ENABLE_MMU)
#define CFG_NO_FLASH 1
-#define CFG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x40000
#define CFG_ENV_OFFSET_REDUND 0x44000
#define CFG_ENV_SIZE 0x4000
# endif
#endif /* CFG_ENV_IS_IN_FLASH */
-#if defined(CFG_ENV_IS_IN_NAND)
+#if defined(CONFIG_ENV_IS_IN_NAND)
# ifndef CFG_ENV_OFFSET
-# error "Need to define CFG_ENV_OFFSET when using CFG_ENV_IS_IN_NAND"
+# error "Need to define CFG_ENV_OFFSET when using CONFIG_ENV_IS_IN_NAND"
# endif
# ifndef CFG_ENV_SIZE
-# error "Need to define CFG_ENV_SIZE when using CFG_ENV_IS_IN_NAND"
+# error "Need to define CFG_ENV_SIZE when using CONFIG_ENV_IS_IN_NAND"
# endif
# ifdef CFG_ENV_OFFSET_REDUND
# define CFG_REDUNDAND_ENVIRONMENT
# ifdef CFG_ENV_IS_EMBEDDED
# define ENV_IS_EMBEDDED 1
# endif
-#endif /* CFG_ENV_IS_IN_NAND */
+#endif /* CONFIG_ENV_IS_IN_NAND */
#ifdef USE_HOSTCC
# include <stdint.h>