DEPENDS:=+comgt +kmod-usb-serial +kmod-usb-serial-sierrawireless +kmod-usb-net +kmod-usb-net-sierrawireless
endef
+define Package/comgt-ncm
+$(call Package/comgt/Default)
+ TITLE+=NCM 3G/4G Support
+ DEPENDS:=+comgt +kmod-usb-serial +kmod-usb-serial-option +kmod-usb-net +kmod-usb-net-cdc-ncm +kmod-usb-net-huawei-cdc-ncm
+endef
+
define Package/comgt/description
comgt is a scripting language interpreter useful for establishing
communications on serial lines and through PCMCIA modems as well as GPRS
$(INSTALL_BIN) ./files/directip.sh $(1)/lib/netifd/proto/directip.sh
endef
+define Package/comgt-ncm/install
+ $(INSTALL_DIR) $(1)/etc/gcom
+ $(INSTALL_DATA) ./files/ncm.json $(1)/etc/gcom/ncm.json
+ $(INSTALL_DATA) ./files/runcommand.gcom $(1)/etc/gcom/runcommand.gcom
+ $(INSTALL_DIR) $(1)/lib/netifd/proto
+ $(INSTALL_BIN) ./files/ncm.sh $(1)/lib/netifd/proto/ncm.sh
+endef
+
$(eval $(call BuildPackage,comgt))
$(eval $(call BuildPackage,comgt-directip))
+$(eval $(call BuildPackage,comgt-ncm))
--- /dev/null
+{
+ "huawei": {
+ "initialize": [
+ "AT",
+ "ATZ",
+ "ATQ0",
+ "ATV1",
+ "ATE1",
+ "ATS0=0"
+ ],
+ "modes": {
+ "preferlte": "AT^SYSCFGEX=\\\"030201\\\",3fffffff,2,4,7fffffffffffffff,,",
+ "preferumts": "AT^SYSCFGEX=\\\"0201\\\",3fffffff,2,4,7fffffffffffffff,,",
+ "lte": "AT^SYSCFGEX=\\\"03\\\",3fffffff,2,4,7fffffffffffffff,,",
+ "umts": "AT^SYSCFGEX=\\\"02\\\",3fffffff,2,4,7fffffffffffffff,,",
+ "gsm": "AT^SYSCFGEX=\\\"01\\\",3fffffff,2,4,7fffffffffffffff,,",
+ "auto": "AT^SYSCFGEX=\\\"00\\\",3fffffff,2,4,7fffffffffffffff,,"
+ },
+ "connect": "AT^NDISDUP=1,1,\\\"${apn}\\\"${username:+,\\\"$username\\\"}${password:+,\\\"$password\\\"}${auth:+,$auth}",
+ "disconnect": "AT^NDISDUP=1,0"
+ },
+ "SAMSUNG": {
+ "initialize": [
+ "AT",
+ "AT+CGREG=2",
+ "AT+CFUN=5",
+ "AT+MODESELECT=3",
+ "AT+CGDCONT=1,\\\"IP\\\",\\\"${apn}\\\""
+ ],
+ "modes": {
+ "umts": "AT+CHANGEALLPATH=1"
+ },
+ "connect": "AT+CGATT=1",
+ "disconnect": "AT+CGATT=0"
+ },
+ "Sony": {
+ "initialize": [
+ "AT+CFUN=1",
+ "AT+CGDCONT=1,\\\"IP\\\",\\\"${apn}\\\"",
+ "AT*EIAAUW=1,1,\\\"${username}\\\",\\\"${password}\\\",${auth:-00111}"
+ ],
+ "modes": {
+ "umts": "AT+CFUN=6",
+ "gsm": "AT+CFUN=5"
+ },
+ "connect": "AT*ENAP=1,1",
+ "disconnect": "AT*ENAP=0"
+ }
+}
--- /dev/null
+#!/bin/sh
+
+. /lib/functions.sh
+. ../netifd-proto.sh
+init_proto "$@"
+
+proto_ncm_init_config() {
+ no_device=1
+ available=1
+ proto_config_add_string "device:device"
+ proto_config_add_string apn
+ proto_config_add_string auth
+ proto_config_add_string username
+ proto_config_add_string password
+ proto_config_add_string pincode
+ proto_config_add_string delay
+ proto_config_add_string mode
+}
+
+proto_ncm_setup() {
+ local interface="$1"
+
+ local manufacturer initialize setmode connect
+
+ local device apn auth username password pincode delay mode
+ json_get_vars device apn auth username password pincode delay mode
+
+ [ -n "$device" ] || {
+ echo "ncm[$$]" "No control device specified"
+ proto_notify_error "$interface" NO_DEVICE
+ proto_set_available "$interface" 0
+ return 1
+ }
+ [ -e "$device" ] || {
+ echo "ncm[$$]" "Control device not valid"
+ proto_set_available "$interface" 0
+ return 1
+ }
+ [ -n "$apn" ] || {
+ echo "ncm[$$]" "No APN specified"
+ proto_notify_error "$interface" NO_APN
+ proto_set_available "$interface" 0
+ return 1
+ }
+
+ [ -n "$delay" ] && sleep "$delay"
+
+ manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print $2 }'`
+ [ $? -ne 0 ] && {
+ echo "ncm[$$]" "Failed to get modem information"
+ proto_notify_error "$interface" GETINFO_FAILED
+ proto_set_available "$interface" 0
+ return 1
+ }
+
+ json_load "$(cat /etc/gcom/ncm.json)"
+ json_select "$manufacturer"
+ [ $? -ne 0 ] && {
+ echo "ncm[$$]" "Unsupported modem"
+ proto_notify_error "$interface" UNSUPPORTED_MODEM
+ proto_set_available "$interface" 0
+ return 1
+ }
+ json_get_values initialize initialize
+ for i in $initialize; do
+ eval COMMAND="$i" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+ echo "ncm[$$]" "Failed to initialize modem"
+ proto_notify_error "$interface" INITIALIZE_FAILED
+ proto_set_available "$interface" 0
+ return 1
+ }
+ done
+
+ [ -n "$pincode" ] && {
+ PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
+ echo "ncm[$$]" "Unable to verify PIN"
+ proto_notify_error "$interface" PIN_FAILED
+ proto_block_restart "$interface"
+ return 1
+ }
+ }
+ [ -n "$mode" ] && {
+ json_select modes
+ json_get_var setmode "$mode"
+ COMMAND="$setmode" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+ echo "ncm[$$]" "Failed to set operating mode"
+ proto_notify_error "$interface" SETMODE_FAILED
+ proto_set_available "$interface" 0
+ return 1
+ }
+ json_select ..
+ }
+
+ json_get_var connect connect
+ eval COMMAND="$connect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+ echo "ncm[$$]" "Failed to connect"
+ proto_notify_error "$interface" CONNECT_FAILED
+ proto_set_available "$interface" 0
+ return 1
+ }
+
+ echo "ncm[$$]" "Connected, starting DHCP"
+ proto_init_update "*" 1
+ proto_send_update "$interface"
+
+ json_init
+ json_add_string name "${interface}_dhcp"
+ json_add_string ifname "@$interface"
+ json_add_string proto "dhcp"
+ json_close_object
+ ubus call network add_dynamic "$(json_dump)"
+
+ json_init
+ json_add_string name "${interface}_dhcpv6"
+ json_add_string ifname "@$interface"
+ json_add_string proto "dhcpv6"
+ json_close_object
+ ubus call network add_dynamic "$(json_dump)"
+}
+
+proto_ncm_teardown() {
+ local interface="$1"
+
+ proto_init_update "*" 0
+ proto_send_update "$interface"
+
+ local manufacturer disconnect
+
+ local device
+ json_get_vars device
+
+ echo "ncm[$$]" "Stopping network"
+
+ manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print $2 }'`
+ [ $? -ne 0 ] && {
+ echo "ncm[$$]" "Failed to get modem information"
+ proto_notify_error "$interface" GETINFO_FAILED
+ return 1
+ }
+
+ json_load "$(cat /etc/gcom/ncm.json)"
+ json_select "$manufacturer" || {
+ echo "ncm[$$]" "Unsupported modem"
+ proto_notify_error "$interface" UNSUPPORTED_MODEM
+ return 1
+ }
+
+ json_get_var disconnect disconnect
+ COMMAND="$disconnect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+ echo "ncm[$$]" "Failed to disconnect"
+ proto_notify_error "$interface" DISCONNECT_FAILED
+ return 1
+ }
+}
+
+add_protocol ncm
projects / openwrt / staging / wigyori.git / commitdiff