/* Total length of frame header for dongle protocol */
#define SDPCM_HDRLEN (SDPCM_FRAMETAG_LEN + SDPCM_SWHEADER_LEN)
-#ifdef SDTEST
-#define SDPCM_RESERVE (SDPCM_HDRLEN + SDPCM_TEST_HDRLEN + BRCMF_SDALIGN)
-#else
#define SDPCM_RESERVE (SDPCM_HDRLEN + BRCMF_SDALIGN)
-#endif
/*
* Software allocation of To SB Mailbox resources
/* Field to decide if rx of control frames happen in rxbuf or lb-pool */
bool usebufpool;
-#ifdef SDTEST
- /* external loopback */
- bool ext_loop;
- u8 loopid;
-
- /* pktgen configuration */
- uint pktgen_freq; /* Ticks between bursts */
- uint pktgen_count; /* Packets to send each burst */
- uint pktgen_print; /* Bursts between count displays */
- uint pktgen_total; /* Stop after this many */
- uint pktgen_minlen; /* Minimum packet data len */
- uint pktgen_maxlen; /* Maximum packet data len */
- uint pktgen_mode; /* Configured mode: tx, rx, or echo */
- uint pktgen_stop; /* Number of tx failures causing stop */
-
- /* active pktgen fields */
- uint pktgen_tick; /* Tick counter for bursts */
- uint pktgen_ptick; /* Burst counter for printing */
- uint pktgen_sent; /* Number of test packets generated */
- uint pktgen_rcvd; /* Number of test packets received */
- uint pktgen_fail; /* Number of failed send attempts */
- u16 pktgen_len; /* Length of next packet to send */
-#endif /* SDTEST */
-
/* Some additional counters */
uint tx_sderrs; /* Count of tx attempts with sd errors */
uint fcqueued; /* Tx packets that got queued */
#define HOSTINTMASK (I_HMB_SW_MASK | I_CHIPACTIVE)
-#ifdef SDTEST
-static void brcmf_sdbrcm_checkdied(struct brcmf_bus *bus, void *pkt, uint seq);
-static void brcmf_sdbrcm_sdtest_set(struct brcmf_bus *bus, bool start);
-#endif
-
#ifdef BCMDBG
static int brcmf_sdbrcm_bus_console_in(struct brcmf_pub *drvr,
unsigned char *msg, uint msglen);
datalen = pkt->len;
-#ifdef SDTEST
- /* Push the test header if doing loopback */
- if (bus->ext_loop) {
- u8 *data;
- skb_push(pkt, SDPCM_TEST_HDRLEN);
- data = pkt->data;
- *data++ = SDPCM_TEST_ECHOREQ;
- *data++ = (u8) bus->loopid++;
- *data++ = (datalen >> 0);
- *data++ = (datalen >> 8);
- datalen += SDPCM_TEST_HDRLEN;
- }
-#endif /* SDTEST */
-
/* Add space for the header */
skb_push(pkt, SDPCM_HDRLEN);
/* precondition: IS_ALIGNED((unsigned long)(pkt->data), 2) */
/* Make sure back plane ht clk is on, no pending allowed */
brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, true);
-#ifndef SDTEST
BRCMF_TRACE(("%s: calling txpkt\n", __func__));
ret = brcmf_sdbrcm_txpkt(bus, pkt, SDPCM_DATA_CHANNEL, true);
-#else
- ret = brcmf_sdbrcm_txpkt(bus, pkt,
- (bus->ext_loop ? SDPCM_TEST_CHANNEL :
- SDPCM_DATA_CHANNEL), true);
-#endif
if (ret)
bus->drvr->tx_errors++;
else
spin_unlock_bh(&bus->txqlock);
datalen = pkt->len - SDPCM_HDRLEN;
-#ifndef SDTEST
ret = brcmf_sdbrcm_txpkt(bus, pkt, SDPCM_DATA_CHANNEL, true);
-#else
- ret = brcmf_sdbrcm_txpkt(bus, pkt,
- (bus->ext_loop ? SDPCM_TEST_CHANNEL :
- SDPCM_DATA_CHANNEL), true);
-#endif
if (ret)
bus->drvr->tx_errors++;
else
IOV_ALIGNCTL,
IOV_SDALIGN,
IOV_DEVRESET,
-#ifdef SDTEST
- IOV_PKTGEN,
- IOV_EXTLOOP,
-#endif /* SDTEST */
IOV_TXBOUND,
IOV_RXBOUND,
IOV_TXMINMAX,
{"checkdied", IOV_CHECKDIED, 0, IOVT_BUFFER, 0}
,
#endif /* BCMDBG */
-#ifdef SDTEST
- {"extloop", IOV_EXTLOOP, 0, IOVT_BOOL, 0}
- ,
- {"pktgen", IOV_PKTGEN, 0, IOVT_BUFFER, sizeof(struct brcmf_pktgen)}
- ,
-#endif /* SDTEST */
{NULL, 0, 0, 0, 0}
};
brcmu_bprintf(strbuf, "\n\n");
}
-#ifdef SDTEST
- if (bus->pktgen_count) {
- brcmu_bprintf(strbuf, "pktgen config and count:\n");
- brcmu_bprintf(strbuf,
- "freq %d count %d print %d total %d min %d len %d\n",
- bus->pktgen_freq, bus->pktgen_count,
- bus->pktgen_print, bus->pktgen_total,
- bus->pktgen_minlen, bus->pktgen_maxlen);
- brcmu_bprintf(strbuf, "send attempts %d rcvd %d fail %d\n",
- bus->pktgen_sent, bus->pktgen_rcvd,
- bus->pktgen_fail);
- }
-#endif /* SDTEST */
#ifdef BCMDBG
brcmu_bprintf(strbuf, "dpc_sched %d host interrupt%spending\n",
bus->dpc_sched, " not ");
bus->f2rxhdrs = bus->f2rxdata = bus->f2txdata = bus->f1regdata = 0;
}
-#ifdef SDTEST
-static int brcmf_sdbrcm_pktgen_get(struct brcmf_bus *bus, u8 *arg)
-{
- struct brcmf_pktgen pktgen;
-
- pktgen.version = BRCMF_PKTGEN_VERSION;
- pktgen.freq = bus->pktgen_freq;
- pktgen.count = bus->pktgen_count;
- pktgen.print = bus->pktgen_print;
- pktgen.total = bus->pktgen_total;
- pktgen.minlen = bus->pktgen_minlen;
- pktgen.maxlen = bus->pktgen_maxlen;
- pktgen.numsent = bus->pktgen_sent;
- pktgen.numrcvd = bus->pktgen_rcvd;
- pktgen.numfail = bus->pktgen_fail;
- pktgen.mode = bus->pktgen_mode;
- pktgen.stop = bus->pktgen_stop;
-
- memcpy(arg, &pktgen, sizeof(pktgen));
-
- return 0;
-}
-
-static int brcmf_sdbrcm_pktgen_set(struct brcmf_bus *bus, u8 *arg)
-{
- struct brcmf_pktgen pktgen;
- uint oldcnt, oldmode;
-
- memcpy(&pktgen, arg, sizeof(pktgen));
- if (pktgen.version != BRCMF_PKTGEN_VERSION)
- return -EINVAL;
-
- oldcnt = bus->pktgen_count;
- oldmode = bus->pktgen_mode;
-
- bus->pktgen_freq = pktgen.freq;
- bus->pktgen_count = pktgen.count;
- bus->pktgen_print = pktgen.print;
- bus->pktgen_total = pktgen.total;
- bus->pktgen_minlen = pktgen.minlen;
- bus->pktgen_maxlen = pktgen.maxlen;
- bus->pktgen_mode = pktgen.mode;
- bus->pktgen_stop = pktgen.stop;
-
- bus->pktgen_tick = bus->pktgen_ptick = 0;
- bus->pktgen_len = max(bus->pktgen_len, bus->pktgen_minlen);
- bus->pktgen_len = min(bus->pktgen_len, bus->pktgen_maxlen);
-
- /* Clear counts for a new pktgen (mode change, or was stopped) */
- if (bus->pktgen_count && (!oldcnt || oldmode != bus->pktgen_mode))
- bus->pktgen_sent = bus->pktgen_rcvd = bus->pktgen_fail = 0;
-
- return 0;
-}
-#endif /* SDTEST */
-
static int
brcmf_sdbrcm_membytes(struct brcmf_bus *bus, bool write, u32 address, u8 *data,
uint size)
break;
#endif /* BCMDBG */
-#ifdef SDTEST
- case IOV_GVAL(IOV_EXTLOOP):
- int_val = (s32) bus->ext_loop;
- memcpy(arg, &int_val, val_size);
- break;
-
- case IOV_SVAL(IOV_EXTLOOP):
- bus->ext_loop = bool_val;
- break;
-
- case IOV_GVAL(IOV_PKTGEN):
- bcmerror = brcmf_sdbrcm_pktgen_get(bus, arg);
- break;
-
- case IOV_SVAL(IOV_PKTGEN):
- bcmerror = brcmf_sdbrcm_pktgen_set(bus, arg);
- break;
-#endif /* SDTEST */
-
case IOV_SVAL(IOV_DEVRESET):
BRCMF_TRACE(("%s: Called set IOV_DEVRESET=%d dongle_reset=%d "
"busstate=%d\n",
int ifidx = 0;
uint rxcount = 0; /* Total frames read */
-#if defined(BCMDBG) || defined(SDTEST)
- bool sdtest = false; /* To limit message spew from test mode */
-#endif
-
BRCMF_TRACE(("%s: Enter\n", __func__));
-#ifdef SDTEST
- /* Allow pktgen to override maxframes */
- if (bus->pktgen_count && (bus->pktgen_mode == BRCMF_PKTGEN_RECV)) {
- maxframes = bus->pktgen_count;
- sdtest = true;
- }
-#endif
-
/* Not finished unless we encounter no more frames indication */
*finished = false;
__skb_trim(pkt, len);
skb_pull(pkt, doff);
-#ifdef SDTEST
- /* Test channel packets are processed separately */
- if (chan == SDPCM_TEST_CHANNEL) {
- brcmf_sdbrcm_checkdied(bus, pkt, seq);
- continue;
- }
-#endif /* SDTEST */
-
if (pkt->len == 0) {
brcmu_pkt_buf_free_skb(pkt);
continue;
rxcount = maxframes - rxleft;
#ifdef BCMDBG
/* Message if we hit the limit */
- if (!rxleft && !sdtest)
+ if (!rxleft)
BRCMF_DATA(("%s: hit rx limit of %d frames\n", __func__,
maxframes));
else
}
-#ifdef SDTEST
-static void brcmf_sdbrcm_pktgen_init(struct brcmf_bus *bus)
-{
- /* Default to specified length, or full range */
- if (brcmf_pktgen_len) {
- bus->pktgen_maxlen = min(brcmf_pktgen_len,
- BRCMF_MAX_PKTGEN_LEN);
- bus->pktgen_minlen = bus->pktgen_maxlen;
- } else {
- bus->pktgen_maxlen = BRCMF_MAX_PKTGEN_LEN;
- bus->pktgen_minlen = 0;
- }
- bus->pktgen_len = (u16) bus->pktgen_minlen;
-
- /* Default to per-watchdog burst with 10s print time */
- bus->pktgen_freq = 1;
- bus->pktgen_print = 10000 / brcmf_watchdog_ms;
- bus->pktgen_count = (brcmf_pktgen * brcmf_watchdog_ms + 999) / 1000;
-
- /* Default to echo mode */
- bus->pktgen_mode = BRCMF_PKTGEN_ECHO;
- bus->pktgen_stop = 1;
-}
-
-static void brcmf_sdbrcm_pktgen(struct brcmf_bus *bus)
-{
- struct sk_buff *pkt;
- u8 *data;
- uint pktcount;
- uint fillbyte;
- u16 len;
-
- /* Display current count if appropriate */
- if (bus->pktgen_print && (++bus->pktgen_ptick >= bus->pktgen_print)) {
- bus->pktgen_ptick = 0;
- printk(KERN_DEBUG "%s: send attempts %d rcvd %d\n",
- __func__, bus->pktgen_sent, bus->pktgen_rcvd);
- }
-
- /* For recv mode, just make sure dongle has started sending */
- if (bus->pktgen_mode == BRCMF_PKTGEN_RECV) {
- if (!bus->pktgen_rcvd)
- brcmf_sdbrcm_sdtest_set(bus, true);
- return;
- }
-
- /* Otherwise, generate or request the specified number of packets */
- for (pktcount = 0; pktcount < bus->pktgen_count; pktcount++) {
- /* Stop if total has been reached */
- if (bus->pktgen_total
- && (bus->pktgen_sent >= bus->pktgen_total)) {
- bus->pktgen_count = 0;
- break;
- }
-
- /* Allocate an appropriate-sized packet */
- len = bus->pktgen_len;
- pkt = brcmu_pkt_buf_get_skb(
- len + SDPCM_HDRLEN + SDPCM_TEST_HDRLEN + BRCMF_SDALIGN,
- true);
- if (!pkt) {
- BRCMF_ERROR(("%s: brcmu_pkt_buf_get_skb failed!\n",
- __func__));
- break;
- }
- PKTALIGN(pkt, (len + SDPCM_HDRLEN + SDPCM_TEST_HDRLEN),
- BRCMF_SDALIGN);
- data = (u8 *) (pkt->data) + SDPCM_HDRLEN;
-
- /* Write test header cmd and extra based on mode */
- switch (bus->pktgen_mode) {
- case BRCMF_PKTGEN_ECHO:
- *data++ = SDPCM_TEST_ECHOREQ;
- *data++ = (u8) bus->pktgen_sent;
- break;
-
- case BRCMF_PKTGEN_SEND:
- *data++ = SDPCM_TEST_DISCARD;
- *data++ = (u8) bus->pktgen_sent;
- break;
-
- case BRCMF_PKTGEN_RXBURST:
- *data++ = SDPCM_TEST_BURST;
- *data++ = (u8) bus->pktgen_count;
- break;
-
- default:
- BRCMF_ERROR(("Unrecognized pktgen mode %d\n",
- bus->pktgen_mode));
- brcmu_pkt_buf_free_skb(pkt, true);
- bus->pktgen_count = 0;
- return;
- }
-
- /* Write test header length field */
- *data++ = (len >> 0);
- *data++ = (len >> 8);
-
- /* Then fill in the remainder -- N/A for burst,
- but who cares... */
- for (fillbyte = 0; fillbyte < len; fillbyte++)
- *data++ =
- SDPCM_TEST_FILL(fillbyte, (u8) bus->pktgen_sent);
-
-#ifdef BCMDBG
- if (BRCMF_BYTES_ON() && BRCMF_DATA_ON()) {
- data = (u8 *) (pkt->data) + SDPCM_HDRLEN;
- printk(KERN_DEBUG "brcmf_sdbrcm_pktgen: Tx Data:\n");
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, data,
- pkt->len - SDPCM_HDRLEN);
- }
-#endif
-
- /* Send it */
- if (brcmf_sdbrcm_txpkt(bus, pkt, SDPCM_TEST_CHANNEL, true)) {
- bus->pktgen_fail++;
- if (bus->pktgen_stop
- && bus->pktgen_stop == bus->pktgen_fail)
- bus->pktgen_count = 0;
- }
- bus->pktgen_sent++;
-
- /* Bump length if not fixed, wrap at max */
- if (++bus->pktgen_len > bus->pktgen_maxlen)
- bus->pktgen_len = (u16) bus->pktgen_minlen;
-
- /* Special case for burst mode: just send one request! */
- if (bus->pktgen_mode == BRCMF_PKTGEN_RXBURST)
- break;
- }
-}
-
-static void brcmf_sdbrcm_sdtest_set(struct brcmf_bus *bus, bool start)
-{
- struct sk_buff *pkt;
- u8 *data;
-
- /* Allocate the packet */
- pkt = brcmu_pkt_buf_get_skb(SDPCM_HDRLEN + SDPCM_TEST_HDRLEN +
- BRCMF_SDALIGN, true);
- if (!pkt) {
- BRCMF_ERROR(("%s: brcmu_pkt_buf_get_skb failed!\n", __func__));
- return;
- }
- PKTALIGN(pkt, (SDPCM_HDRLEN + SDPCM_TEST_HDRLEN), BRCMF_SDALIGN);
- data = (u8 *) (pkt->data) + SDPCM_HDRLEN;
-
- /* Fill in the test header */
- *data++ = SDPCM_TEST_SEND;
- *data++ = start;
- *data++ = (bus->pktgen_maxlen >> 0);
- *data++ = (bus->pktgen_maxlen >> 8);
-
- /* Send it */
- if (brcmf_sdbrcm_txpkt(bus, pkt, SDPCM_TEST_CHANNEL, true))
- bus->pktgen_fail++;
-}
-
-static void
-brcmf_sdbrcm_checkdied(struct brcmf_bus *bus, struct sk_buff *pkt, uint seq)
-{
- u8 *data;
- uint pktlen;
-
- u8 cmd;
- u8 extra;
- u16 len;
- u16 offset;
-
- /* Check for min length */
- pktlen = pkt->len;
- if (pktlen < SDPCM_TEST_HDRLEN) {
- BRCMF_ERROR(("brcmf_sdbrcm_checkdied: toss runt frame, pktlen "
- "%d\n", pktlen));
- brcmu_pkt_buf_free_skb(pkt, false);
- return;
- }
-
- /* Extract header fields */
- data = pkt->data;
- cmd = *data++;
- extra = *data++;
- len = *data++;
- len += *data++ << 8;
-
- /* Check length for relevant commands */
- if (cmd == SDPCM_TEST_DISCARD || cmd == SDPCM_TEST_ECHOREQ
- || cmd == SDPCM_TEST_ECHORSP) {
- if (pktlen != len + SDPCM_TEST_HDRLEN) {
- BRCMF_ERROR(("brcmf_sdbrcm_checkdied: frame length "
- "mismatch, pktlen %d seq %d"
- " cmd %d extra %d len %d\n",
- pktlen, seq, cmd, extra, len));
- brcmu_pkt_buf_free_skb(pkt, false);
- return;
- }
- }
-
- /* Process as per command */
- switch (cmd) {
- case SDPCM_TEST_ECHOREQ:
- /* Rx->Tx turnaround ok (even on NDIS w/current
- implementation) */
- *(u8 *) (pkt->data) = SDPCM_TEST_ECHORSP;
- if (brcmf_sdbrcm_txpkt(bus, pkt, SDPCM_TEST_CHANNEL, true) == 0)
- bus->pktgen_sent++;
- else {
- bus->pktgen_fail++;
- brcmu_pkt_buf_free_skb(pkt, false);
- }
- bus->pktgen_rcvd++;
- break;
-
- case SDPCM_TEST_ECHORSP:
- if (bus->ext_loop) {
- brcmu_pkt_buf_free_skb(pkt, false);
- bus->pktgen_rcvd++;
- break;
- }
-
- for (offset = 0; offset < len; offset++, data++) {
- if (*data != SDPCM_TEST_FILL(offset, extra)) {
- BRCMF_ERROR(("brcmf_sdbrcm_checkdied: echo"
- " data mismatch: "
- "offset %d (len %d) "
- "expect 0x%02x rcvd 0x%02x\n",
- offset, len,
- SDPCM_TEST_FILL(offset, extra),
- *data));
- break;
- }
- }
- brcmu_pkt_buf_free_skb(pkt, false);
- bus->pktgen_rcvd++;
- break;
-
- case SDPCM_TEST_DISCARD:
- brcmu_pkt_buf_free_skb(pkt, false);
- bus->pktgen_rcvd++;
- break;
-
- case SDPCM_TEST_BURST:
- case SDPCM_TEST_SEND:
- default:
- BRCMF_INFO(("brcmf_sdbrcm_checkdied: unsupported or unknown "
- "command, pktlen %d seq %d" " cmd %d extra %d"
- " len %d\n", pktlen, seq, cmd, extra, len));
- brcmu_pkt_buf_free_skb(pkt, false);
- break;
- }
-
- /* For recv mode, stop at limie (and tell dongle to stop sending) */
- if (bus->pktgen_mode == BRCMF_PKTGEN_RECV) {
- if (bus->pktgen_total
- && (bus->pktgen_rcvd >= bus->pktgen_total)) {
- bus->pktgen_count = 0;
- brcmf_sdbrcm_sdtest_set(bus, false);
- }
- }
-}
-#endif /* SDTEST */
-
extern bool brcmf_sdbrcm_bus_watchdog(struct brcmf_pub *drvr)
{
struct brcmf_bus *bus;
}
#endif /* BCMDBG */
-#ifdef SDTEST
- /* Generate packets if configured */
- if (bus->pktgen_count && (++bus->pktgen_tick >= bus->pktgen_freq)) {
- /* Make sure backplane clock is on */
- brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
- bus->pktgen_tick = 0;
- brcmf_sdbrcm_pktgen(bus);
- }
-#endif
-
/* On idle timeout clear activity flag and/or turn off clock */
if ((bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) {
if (++bus->idlecount >= bus->idletime) {
{
BRCMF_TRACE(("%s: Enter\n", __func__));
-#ifdef SDTEST
- brcmf_sdbrcm_pktgen_init(bus);
-#endif /* SDTEST */
-
/* Disable F2 to clear any intermediate frame state on the dongle */
brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx,
SDIO_FUNC_ENABLE_1, NULL);
projects / openwrt / staging / blogic.git / commitdiff