PCI: tegra: Use physical range for I/O mapping

Commit 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO
resources") changed how I/O resources are parsed from DT.  Rather than
containing the physical address of the I/O region, the addresses will now
be in I/O address space.

On Tegra the union of all ranges is used to expose a top-level memory-
mapped resource for the PCI host bridge.  This helps to make /proc/iomem
more readable.

Combining both of the above, the union would now include the I/O space
region.  This causes a regression on Tegra20, where the physical base
address of the PCIe controller (and therefore of the union) is located at
physical address 0x80000000.  Since I/O space starts at 0, the union will
now include all of system RAM which starts at 0x00000000.

This commit fixes this by keeping two copies of the I/O range: one that
represents the range in the CPU's physical address space, the other for the
range in the I/O address space.  This allows the translation setup within
the driver to reuse the physical addresses.  The code registering the I/O
region with the PCI core uses both ranges to establish the mapping.

Fixes: 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources")
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 3d43874319bebb13999889522f8d85e61b7251a2..19bb19c7db4a77eb649ddc3c9fc77b95a1f7c479 100644 (file)
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -276,6 +276,7 @@ struct tegra_pcie {
 
        struct resource all;
        struct resource io;
+       struct resource pio;
        struct resource mem;
        struct resource prefetch;
        struct resource busn;
@@ -658,7 +659,6 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
 {
        struct tegra_pcie *pcie = sys_to_pcie(sys);
        int err;
-       phys_addr_t io_start;
 
        err = devm_request_resource(pcie->dev, &pcie->all, &pcie->mem);
        if (err < 0)
@@ -668,14 +668,12 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
        if (err)
                return err;
 
-       io_start = pci_pio_to_address(pcie->io.start);
-
        pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
        pci_add_resource_offset(&sys->resources, &pcie->prefetch,
                                sys->mem_offset);
        pci_add_resource(&sys->resources, &pcie->busn);
 
-       pci_ioremap_io(nr * SZ_64K, io_start);
+       pci_ioremap_io(pcie->pio.start, pcie->io.start);
 
        return 1;
 }
@@ -786,7 +784,6 @@ static irqreturn_t tegra_pcie_isr(int irq, void *arg)
 static void tegra_pcie_setup_translations(struct tegra_pcie *pcie)
 {
        u32 fpci_bar, size, axi_address;
-       phys_addr_t io_start = pci_pio_to_address(pcie->io.start);
 
        /* Bar 0: type 1 extended configuration space */
        fpci_bar = 0xfe100000;
@@ -799,7 +796,7 @@ static void tegra_pcie_setup_translations(struct tegra_pcie *pcie)
        /* Bar 1: downstream IO bar */
        fpci_bar = 0xfdfc0000;
        size = resource_size(&pcie->io);
-       axi_address = io_start;
+       axi_address = pcie->io.start;
        afi_writel(pcie, axi_address, AFI_AXI_BAR1_START);
        afi_writel(pcie, size >> 12, AFI_AXI_BAR1_SZ);
        afi_writel(pcie, fpci_bar, AFI_FPCI_BAR1);
@@ -1690,8 +1687,23 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 
                switch (res.flags & IORESOURCE_TYPE_BITS) {
                case IORESOURCE_IO:
-                       memcpy(&pcie->io, &res, sizeof(res));
-                       pcie->io.name = np->full_name;
+                       memcpy(&pcie->pio, &res, sizeof(res));
+                       pcie->pio.name = np->full_name;
+
+                       /*
+                        * The Tegra PCIe host bridge uses this to program the
+                        * mapping of the I/O space to the physical address,
+                        * so we override the .start and .end fields here that
+                        * of_pci_range_to_resource() converted to I/O space.
+                        * We also set the IORESOURCE_MEM type to clarify that
+                        * the resource is in the physical memory space.
+                        */
+                       pcie->io.start = range.cpu_addr;
+                       pcie->io.end = range.cpu_addr + range.size - 1;
+                       pcie->io.flags = IORESOURCE_MEM;
+                       pcie->io.name = "I/O";
+
+                       memcpy(&res, &pcie->io, sizeof(res));
                        break;
 
                case IORESOURCE_MEM: