powerpc: Add more Power7 specific definitions

This adds more SPR definitions used on newer processors when running
in hypervisor mode. Along with some other P7 specific bits and pieces

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 98210067c1ccbac17f449946a4a5b42023cea1f2..1b422381fc16f806568b2c185e57dd42a4939fb3 100644 (file)
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -170,6 +170,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 #define HMT_MEDIUM     or      2,2,2
 #define HMT_MEDIUM_HIGH or     5,5,5           # medium high priority
 #define HMT_HIGH       or      3,3,3
+#define HMT_EXTRA_HIGH or      7,7,7           # power7 only
 
 #ifdef __KERNEL__
 #ifdef CONFIG_PPC64

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 7e4abebe76c0c6d342f95addba8a88e74e6ab518..6eb1d77edb4b514ea1bde473ccdc4463972880b2 100644 (file)
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -210,8 +210,43 @@
 #define SPRN_TBWL      0x11C   /* Time Base Lower Register (super, R/W) */
 #define SPRN_TBWU      0x11D   /* Time Base Upper Register (super, R/W) */
 #define SPRN_SPURR     0x134   /* Scaled PURR */
+#define SPRN_HSPRG0    0x130   /* Hypervisor Scratch 0 */
+#define SPRN_HSPRG1    0x131   /* Hypervisor Scratch 1 */
+#define SPRN_HDSISR     0x132
+#define SPRN_HDAR       0x133
+#define SPRN_HDEC      0x136   /* Hypervisor Decrementer */
 #define SPRN_HIOR      0x137   /* 970 Hypervisor interrupt offset */
+#define SPRN_RMOR      0x138   /* Real mode offset register */
+#define SPRN_HRMOR     0x139   /* Real mode offset register */
+#define SPRN_HSRR0     0x13A   /* Hypervisor Save/Restore 0 */
+#define SPRN_HSRR1     0x13B   /* Hypervisor Save/Restore 1 */
 #define SPRN_LPCR      0x13E   /* LPAR Control Register */
+#define   LPCR_VPM0    (1ul << (63-0))
+#define   LPCR_VPM1    (1ul << (63-1))
+#define   LPCR_ISL     (1ul << (63-2))
+#define   LPCR_DPFD_SH (63-11)
+#define   LPCR_VRMA_L  (1ul << (63-12))
+#define   LPCR_VRMA_LP0        (1ul << (63-15))
+#define   LPCR_VRMA_LP1        (1ul << (63-16))
+#define   LPCR_RMLS    0x1C000000      /* impl dependent rmo limit sel */
+#define   LPCR_ILE     0x02000000      /* !HV irqs set MSR:LE */
+#define   LPCR_PECE    0x00007000      /* powersave exit cause enable */
+#define     LPCR_PECE0 0x00004000      /* ext. exceptions can cause exit */
+#define     LPCR_PECE1 0x00002000      /* decrementer can cause exit */
+#define     LPCR_PECE2 0x00001000      /* machine check etc can cause exit */
+#define   LPCR_MER     0x00000800      /* Mediated External Exception */
+#define   LPCR_LPES0   0x00000008      /* LPAR Env selector 0 */
+#define   LPCR_LPES1   0x00000004      /* LPAR Env selector 1 */
+#define   LPCR_RMI     0x00000002      /* real mode is cache inhibit */
+#define   LPCR_HDICE   0x00000001      /* Hyp Decr enable (HV,PR,EE) */
+#define SPRN_LPID      0x13F   /* Logical Partition Identifier */
+#define        SPRN_HMER       0x150   /* Hardware m? error recovery */
+#define        SPRN_HMEER      0x151   /* Hardware m? enable error recovery */
+#define        SPRN_HEIR       0x153   /* Hypervisor Emulated Instruction Register */
+#define SPRN_TLBINDEXR 0x154   /* P7 TLB control register */
+#define SPRN_TLBVPNR   0x155   /* P7 TLB control register */
+#define SPRN_TLBRPNR   0x156   /* P7 TLB control register */
+#define SPRN_TLBLPIDR  0x157   /* P7 TLB control register */
 #define SPRN_DBAT0L    0x219   /* Data BAT 0 Lower Register */
 #define SPRN_DBAT0U    0x218   /* Data BAT 0 Upper Register */
 #define SPRN_DBAT1L    0x21B   /* Data BAT 1 Lower Register */
@@ -434,16 +469,23 @@
 #define SPRN_SRR0      0x01A   /* Save/Restore Register 0 */
 #define SPRN_SRR1      0x01B   /* Save/Restore Register 1 */
 #define   SRR1_WAKEMASK                0x00380000 /* reason for wakeup */
-#define   SRR1_WAKERESET       0x00380000 /* System reset */
 #define   SRR1_WAKESYSERR      0x00300000 /* System error */
 #define   SRR1_WAKEEE          0x00200000 /* External interrupt */
 #define   SRR1_WAKEMT          0x00280000 /* mtctrl */
+#define          SRR1_WAKEHMI          0x00280000 /* Hypervisor maintenance */
 #define   SRR1_WAKEDEC         0x00180000 /* Decrementer interrupt */
 #define   SRR1_WAKETHERM       0x00100000 /* Thermal management interrupt */
+#define          SRR1_WAKERESET        0x00100000 /* System reset */
+#define          SRR1_WAKESTATE        0x00030000 /* Powersave exit mask [46:47] */
+#define          SRR1_WS_DEEPEST       0x00030000 /* Some resources not maintained,
+                                         * may not be recoverable */
+#define          SRR1_WS_DEEPER        0x00020000 /* Some resources not maintained */
+#define          SRR1_WS_DEEP          0x00010000 /* All resources maintained */
 #define   SRR1_PROGFPE         0x00100000 /* Floating Point Enabled */
 #define   SRR1_PROGPRIV                0x00040000 /* Privileged instruction */
 #define   SRR1_PROGTRAP                0x00020000 /* Trap */
 #define   SRR1_PROGADDR                0x00010000 /* SRR0 contains subsequent addr */
+
 #define SPRN_HSRR0     0x13A   /* Save/Restore Register 0 */
 #define SPRN_HSRR1     0x13B   /* Save/Restore Register 1 */
 
@@ -894,6 +936,8 @@
 #define PV_POWER5p     0x003B
 #define PV_POWER7      0x003F
 #define PV_970FX       0x003C
+#define PV_POWER6      0x003E
+#define PV_POWER7      0x003F
 #define PV_630         0x0040
 #define PV_630p        0x0041
 #define PV_970MP       0x0044