ralink: sync mt7621 pcie driver with latest SDK

fixes newer ECO versions and a hang on reboot bug

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44008

diff --git a/target/linux/ramips/patches-3.14/0016-MIPS-ralink-add-MT7621-pcie-driver.patch b/target/linux/ramips/patches-3.14/0016-MIPS-ralink-add-MT7621-pcie-driver.patch
index 1ff4ed86688a6afd7d98ffb0fddb9d5b1eb727f8..0d0bd09f846aadc6629fbac118cbbcda1b25c81a 100644 (file)
--- a/target/linux/ramips/patches-3.14/0016-MIPS-ralink-add-MT7621-pcie-driver.patch
+++ b/target/linux/ramips/patches-3.14/0016-MIPS-ralink-add-MT7621-pcie-driver.patch
@@ -12,7 +12,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
-@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1
+@@ -41,6 +41,7 @@
  obj-$(CONFIG_SNI_RM)          += fixup-sni.o ops-sni.o
  obj-$(CONFIG_LANTIQ)          += fixup-lantiq.o
  obj-$(CONFIG_PCI_LANTIQ)      += pci-lantiq.o ops-lantiq.o
@@ -22,7 +22,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  obj-$(CONFIG_TANBAC_TB0226)   += fixup-tb0226.o
 --- /dev/null
 +++ b/arch/mips/pci/pci-mt7621.c
-@@ -0,0 +1,797 @@
+@@ -0,0 +1,791 @@
 +/**************************************************************************
 + *
 + *  BRIEF MODULE DESCRIPTION
@@ -597,11 +597,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#if defined (CONFIG_PCIE_PORT2)
 +      val |= RALINK_PCIE2_RST;
 +#endif
-+      DEASSERT_SYSRST_PCIE(val);
-+      printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
-+
-+      bypass_pipe_rst();
-+      set_phy_for_ssc();
 +      ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST);
 +      printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
 +#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
@@ -627,24 +622,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#endif
 +      DEASSERT_SYSRST_PCIE(val);
 +      printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
-+#if defined (CONFIG_PCIE_PORT0)
-+      read_config(0, 0, 0, 0x70c, &val);
-+      val &= ~(0xff)<<8;
-+      val |= 0x50<<8;
-+      write_config(0, 0, 0, 0x70c, val);
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+      read_config(0, 1, 0, 0x70c, &val);
-+      val &= ~(0xff)<<8;
-+      val |= 0x50<<8;
-+      write_config(0, 1, 0, 0x70c, val);
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+      read_config(0, 2, 0, 0x70c, &val);
-+      val &= ~(0xff)<<8;
-+      val |= 0x50<<8;
-+      write_config(0, 2, 0, 0x70c, val);
-+#endif
++
++      if ((*(unsigned int *)(0xbe00000c)&0xFFFF) == 0x0101) // MT7621 E2
++              bypass_pipe_rst();
++      set_phy_for_ssc();
++      printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
 +
 +#if defined (CONFIG_PCIE_PORT0)
 +      read_config(0, 0, 0, 0x70c, &val);
@@ -799,16 +781,28 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +              read_config(0, 2, 0, 0x4, &val);
 +              write_config(0, 2, 0, 0x4, val|0x4);
 +              // write_config(0, 1, 0, 0x4, val|0x7);
++              read_config(0, 2, 0, 0x70c, &val);
++              val &= ~(0xff)<<8;
++              val |= 0x50<<8;
++              write_config(0, 2, 0, 0x70c, val);
 +      case 3:
 +      case 5:
 +      case 6:
 +              read_config(0, 1, 0, 0x4, &val);
 +              write_config(0, 1, 0, 0x4, val|0x4);
 +              // write_config(0, 1, 0, 0x4, val|0x7);
++              read_config(0, 1, 0, 0x70c, &val);
++              val &= ~(0xff)<<8;
++              val |= 0x50<<8;
++              write_config(0, 1, 0, 0x70c, val);
 +      default:
 +              read_config(0, 0, 0, 0x4, &val);
 +              write_config(0, 0, 0, 0x4, val|0x4); //bus master enable
 +              // write_config(0, 0, 0, 0x4, val|0x7); //bus master enable
++              read_config(0, 0, 0, 0x70c, &val);
++              val &= ~(0xff)<<8;
++              val |= 0x50<<8;
++              write_config(0, 0, 0, 0x70c, val);
 +      }
 +      register_pci_controller(&rt2880_controller);
 +      return 0;