--- /dev/null
+From 1ca5f2430c4f9d85b98b8d6e5d93f8d4802faf8e Mon Sep 17 00:00:00 2001
+From: Vivek Unune <npcomplete13@gmail.com>
+Date: Wed, 14 Oct 2020 15:27:27 -0400
+Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7
+
+Add ports 5 and 7 which are connected to gmac cores 1 & 2.
+These will be disabled for now.
+
+Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../boot/dts/bcm47094-linksys-panamera.dts | 24 +++++++++++++++++++
+ 1 file changed, 24 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
++++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+@@ -242,6 +242,30 @@
+ label = "wan";
+ };
+
++ port@5 {
++ reg = <5>;
++ ethernet = <&gmac0>;
++ label = "cpu";
++ status = "disabled";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++
++ port@7 {
++ reg = <7>;
++ ethernet = <&gmac1>;
++ label = "cpu";
++ status = "disabled";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++
+ port@8 {
+ reg = <8>;
+ ethernet = <&gmac2>;
--- /dev/null
+From bd9a01e28e5d1632528e531480b42d6e2c861d88 Mon Sep 17 00:00:00 2001
+From: Vivek Unune <npcomplete13@gmail.com>
+Date: Sun, 1 Nov 2020 15:08:03 -0500
+Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions
+
+This router has dual paritions to store trx firmware image and
+dual partitions for nvram. The second one in each of these cases acts
+as a backup store.
+
+When tested with OpenWrt, the default partition parser causes two issues:
+
+1. It labels both nvram partitions as nvram. In factory, second one is
+labeled devinfo.
+2. It parses second trx image and tries to create second 'linux' partition
+and fails with - cannot create duplicate 'linux' partition
+
+The following patch works around both of these issues.
+
+Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../boot/dts/bcm47094-linksys-panamera.dts | 41 +++++++++++++++++++
+ 1 file changed, 41 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
++++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+@@ -292,3 +292,44 @@
+ &usb3_phy {
+ status = "okay";
+ };
++
++&nandcs {
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ partition@0 {
++ label = "boot";
++ reg = <0x0000000 0x0080000>;
++ read-only;
++ };
++
++ partition@80000 {
++ label = "nvram";
++ reg = <0x080000 0x0100000>;
++ };
++
++ partition@180000{
++ label = "devinfo";
++ reg = <0x0180000 0x080000>;
++ };
++
++ partition@200000 {
++ label = "firmware";
++ reg = <0x0200000 0x01D00000>;
++ compatible = "brcm,trx";
++ };
++
++ partition@1F00000 {
++ label = "failsafe";
++ reg = <0x01F00000 0x01D00000>;
++ read-only;
++ };
++
++ partition@5200000 {
++ label = "system";
++ reg = <0x05200000 0x02E00000>;
++ };
++ };
++};
--- /dev/null
+From 2f34ae32f5e74096540cd7ce95bfd467cb74b21a Mon Sep 17 00:00:00 2001
+From: Vivek Unune <npcomplete13@gmail.com>
+Date: Wed, 4 Nov 2020 15:29:51 -0500
+Subject: [PATCH] ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709x
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+BCM47094 version of pinmux uses different compatible and supports MDIO
+pinmux pins. Hence, use the correct compatible string and defines the
+MDIO pins group.
+
+Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47094.dtsi | 9 +++++++++
+ arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
+ 2 files changed, 10 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/bcm47094.dtsi
++++ b/arch/arm/boot/dts/bcm47094.dtsi
+@@ -8,6 +8,15 @@
+ / {
+ };
+
++&pinctrl {
++ compatible = "brcm,bcm4709-pinmux";
++
++ pinmux_mdio: mdio {
++ groups = "mdio_grp";
++ function = "mdio";
++ };
++};
++
+ &usb3_phy {
+ compatible = "brcm,ns-bx-usb3-phy";
+ };
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -428,7 +428,7 @@
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+- pin-controller@1c0 {
++ pinctrl: pin-controller@1c0 {
+ compatible = "brcm,bcm4708-pinmux";
+ reg = <0x1c0 0x24>;
+ reg-names = "cru_gpio_control";
--- /dev/null
+From c862059875cffc013ee27bf9759ac288224e7a14 Mon Sep 17 00:00:00 2001
+From: Vivek Unune <npcomplete13@gmail.com>
+Date: Wed, 4 Nov 2020 15:29:52 -0500
+Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl
+
+Now that we have a pin controller, use that instead of manuplating the
+mdio/mdc pins directly. i.e. we no longer require the mdio-mii-mux
+
+Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../boot/dts/bcm47094-linksys-panamera.dts | 26 +++----------------
+ 1 file changed, 4 insertions(+), 22 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
++++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+@@ -123,33 +123,13 @@
+ };
+ };
+
+- mdio-bus-mux {
+- #address-cells = <1>;
+- #size-cells = <0>;
++ mdio-bus-mux@18003000 {
+
+ /* BIT(9) = 1 => external mdio */
+- mdio_ext: mdio@200 {
++ mdio@200 {
+ reg = <0x200>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+- };
+- };
+-
+- mdio-mii-mux {
+- compatible = "mdio-mux-mmioreg";
+- mdio-parent-bus = <&mdio_ext>;
+- #address-cells = <1>;
+- #size-cells = <0>;
+- reg = <0x1800c1c0 0x4>;
+-
+- /* BIT(6) = mdc, BIT(7) = mdio */
+- mux-mask = <0xc0>;
+-
+- mdio-mii@0 {
+- /* Enable MII function */
+- reg = <0x0>;
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+ switch@0 {
+ compatible = "brcm,bcm53125";
+@@ -159,6 +139,8 @@
+ reset-names = "robo_reset";
+ reg = <0>;
+ dsa,member = <1 0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinmux_mdio>;
+
+ ports {
+ #address-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
-- pin-controller@1c0 {
-+ pinctrl {
+- pinctrl: pin-controller@1c0 {
++ pinctrl: pinctrl {
compatible = "brcm,bcm4708-pinmux";
- reg = <0x1c0 0x24>;
- reg-names = "cru_gpio_control";
projects / openwrt / staging / zorun.git / commitdiff