regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio 11 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
startup-delay-us = <300000>;
enable-active-high;
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 6 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
gpio-export {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
};
};
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
};
®_usb_vbus {
- gpio = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
};
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
};
®_usb_vbus {
- gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
};
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
compatible = "mikrotik,gpio-rb91x-key";
gpio-controller;
#gpio-cells = <2>;
- gpio = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
gpio_latch: gpio_latch {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
- gpio = <&gpio 18 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
usb_vbus: reg_usb_vbus {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
};
};
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
status = "disabled";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};