AM3517: Add SPL support

The only change of note is that we move from 0x80008000 to 0x80100000
for CONFIG_SYS_TEXT_BASE

Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>

diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
index c0a006a7b341b8b26706c7f6737e5fff72490274..0a105bf2818314f6584ddbf8408884f6eb13ae7d 100644 (file)
--- a/board/logicpd/am3517evm/am3517evm.c
+++ b/board/logicpd/am3517evm/am3517evm.c
@@ -76,7 +76,7 @@ void set_muxconf_regs(void)
        MUX_AM3517EVM();
 }
 
-#ifdef CONFIG_GENERIC_MMC
+#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
 int board_mmc_init(bd_t *bis)
 {
        omap_mmc_init(0);

diff --git a/board/logicpd/am3517evm/config.mk b/board/logicpd/am3517evm/config.mk
deleted file mode 100644 (file)
index 71ec5d0..0000000
--- a/board/logicpd/am3517evm/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# Author: Vaibhav Hiremath <hvaibhav@ti.com>
-#
-# Based on ti/evm/config.mk
-#
-# Copyright (C) 2010
-# Texas Instruments Incorporated - http://www.ti.com/
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80008000

diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index dfe186caf949cab3c69d8835c99d478c8afcc25c..d44eeec5b68b98956ac946cb162c5e1919fbd8b1 100644 (file)
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -63,7 +63,6 @@
 /*
  * DDR related
  */
-#define CONFIG_OMAP3_MICRON_DDR                1       /* Micron DDR */
 #define CONFIG_SYS_CS0_SIZE            (256 * 1024 * 1024)
 
 /*
@@ -269,7 +268,6 @@
  */
 #define CONFIG_NR_DRAM_BANKS   2       /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1           OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE      (32 << 20)      /* at least 32 MiB */
 #define PHYS_SDRAM_2           OMAP34XX_SDRC_CS1
 
 /*-----------------------------------------------------------------------
@@ -324,4 +322,59 @@
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + \
                                         CONFIG_SYS_INIT_RAM_SIZE - \
                                         GENERATED_GBL_DATA_SIZE)
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_TEXT_BASE           0x40200800
+#define CONFIG_SPL_MAX_SIZE            (45 * 1024)
+#define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
+
+#define CONFIG_SPL_BSS_START_ADDR      0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE                0x80000         /* 512 KB */
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION   1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME       "u-boot.img"
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+/* NAND boot config */
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT     64
+#define CONFIG_SYS_NAND_PAGE_SIZE      2048
+#define CONFIG_SYS_NAND_OOBSIZE                64
+#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS         {2, 3, 4, 5, 6, 7, 8, 9,\
+                                               10, 11, 12, 13}
+#define CONFIG_SYS_NAND_ECCSIZE                512
+#define CONFIG_SYS_NAND_ECCBYTES       3
+#define CONFIG_SYS_NAND_ECCSTEPS       (CONFIG_SYS_NAND_PAGE_SIZE / \
+                                               CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_ECCTOTAL       (CONFIG_SYS_NAND_ECCBYTES * \
+                                               CONFIG_SYS_NAND_ECCSTEPS)
+#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
+
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE           0x80100000
+#define CONFIG_SYS_SPL_MALLOC_START    0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
+
 #endif /* __CONFIG_H */