clk: versatile add DT bindings for the ICST CM variants

The Integrator/AP and Integrator/CP core modules have special
versions of the ICST525 interface hardcoding some bits. Create
special compatible strings to identify these variants, also
explain a bit what is going on.

Cc: devicetree@vger.kernel.org
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
index 8b7177cecb368f598234d7933b60d9da85bb8d73..27468119fd94c496ce5647361b6d20ef6ac0a4e6 100644 (file)
--- a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
+++ b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
@@ -5,20 +5,50 @@ Technology (IDT). ARM integrated these oscillators deeply into their
 reference designs by adding special control registers that manage such
 oscillators to their system controllers.
 
-The ARM system controller contains logic to serialize and initialize
+The various ARM system controllers contain logic to serialize and initialize
 an ICST clock request after a write to the 32 bit register at an offset
 into the system controller. Furthermore, to even be able to alter one of
 these frequencies, the system controller must first be unlocked by
 writing a special token to another offset in the system controller.
 
+Some ARM hardware contain special versions of the serial interface that only
+connects the low 8 bits of the VDW (missing one bit), hardwires RDW to
+different values and sometimes also hardwire the output divider. They
+therefore have special compatible strings as per this table (the OD value is
+the value on the pins, not the resulting output divider):
+
+Hardware variant:        RDW     OD          VDW
+
+Integrator/AP            22      1           Bit 8 0, rest variable
+integratorap-cm
+
+Integrator/AP            46      3           Bit 8 0, rest variable
+integratorap-sys
+
+Integrator/AP            22 or   1           17 or (33 or 25 MHz)
+integratorap-pci         14      1           14
+
+Integrator/CP            22      variable    Bit 8 0, rest variable
+integratorcp-cm-core
+
+Integrator/CP            22      variable    Bit 8 0, rest variable
+integratorcp-cm-mem
+
 The ICST oscillator must be provided inside a system controller node.
 
 Required properties:
+- compatible: must be one of
+  "arm,syscon-icst525"
+  "arm,syscon-icst307"
+  "arm,syscon-icst525-integratorap-cm"
+  "arm,syscon-icst525-integratorap-sys"
+  "arm,syscon-icst525-integratorap-pci"
+  "arm,syscon-icst525-integratorcp-cm-core"
+  "arm,syscon-icst525-integratorcp-cm-mem"
 - lock-offset: the offset address into the system controller where the
   unlocking register is located
 - vco-offset: the offset address into the system controller where the
   ICST control register is located (even 32 bit address)
-- compatible: must be one of "arm,syscon-icst525" or "arm,syscon-icst307"
 - #clock-cells: must be <0>
 - clocks: parent clock, since the ICST needs a parent clock to derive its
   frequency from, this attribute is compulsory.