Reorder kernel patches after recent backports.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
--- /dev/null
+--- a/drivers/watchdog/bcm7038_wdt.c
++++ b/drivers/watchdog/bcm7038_wdt.c
+@@ -34,6 +34,24 @@ struct bcm7038_watchdog {
+
+ static bool nowayout = WATCHDOG_NOWAYOUT;
+
++static inline void bcm7038_wdt_write(unsigned long data, void __iomem *reg)
++{
++#ifdef CONFIG_CPU_BIG_ENDIAN
++ iowrite32be(data, reg);
++#else
++ writel(data, reg);
++#endif
++}
++
++static inline unsigned long bcm7038_wdt_read(void __iomem *reg)
++{
++#ifdef CONFIG_CPU_BIG_ENDIAN
++ return ioread32be(reg);
++#else
++ return readl(reg);
++#endif
++}
++
+ static void bcm7038_wdt_set_timeout_reg(struct watchdog_device *wdog)
+ {
+ struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
+@@ -41,15 +59,15 @@ static void bcm7038_wdt_set_timeout_reg(
+
+ timeout = wdt->rate * wdog->timeout;
+
+- writel(timeout, wdt->base + WDT_TIMEOUT_REG);
++ bcm7038_wdt_write(timeout, wdt->base + WDT_TIMEOUT_REG);
+ }
+
+ static int bcm7038_wdt_ping(struct watchdog_device *wdog)
+ {
+ struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
+
+- writel(WDT_START_1, wdt->base + WDT_CMD_REG);
+- writel(WDT_START_2, wdt->base + WDT_CMD_REG);
++ bcm7038_wdt_write(WDT_START_1, wdt->base + WDT_CMD_REG);
++ bcm7038_wdt_write(WDT_START_2, wdt->base + WDT_CMD_REG);
+
+ return 0;
+ }
+@@ -66,8 +84,8 @@ static int bcm7038_wdt_stop(struct watch
+ {
+ struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
+
+- writel(WDT_STOP_1, wdt->base + WDT_CMD_REG);
+- writel(WDT_STOP_2, wdt->base + WDT_CMD_REG);
++ bcm7038_wdt_write(WDT_STOP_1, wdt->base + WDT_CMD_REG);
++ bcm7038_wdt_write(WDT_STOP_2, wdt->base + WDT_CMD_REG);
+
+ return 0;
+ }
+@@ -88,7 +106,7 @@ static unsigned int bcm7038_wdt_get_time
+ struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
+ u32 time_left;
+
+- time_left = readl(wdt->base + WDT_CMD_REG);
++ time_left = bcm7038_wdt_read(wdt->base + WDT_CMD_REG);
+
+ return time_left / wdt->rate;
+ }
--- /dev/null
+From 84c06b4a1dfa3e021fdbcafaff8cebfdec462402 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Tue, 23 Feb 2021 10:39:48 +0100
+Subject: [PATCH] mips: bmips: disable ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Enabling this option causes kernel panics on BCM6358 with EHCI/OHCI:
+[ 3.881739] usb 1-1: new high-speed USB device number 2 using ehci-platform
+[ 3.895011] Reserved instruction in kernel code[#1]:
+[ 3.900113] CPU: 0 PID: 1 Comm: init Not tainted 5.10.16 #0
+[ 3.905829] $ 0 : 00000000 10008700 00000000 77d94060
+[ 3.911238] $ 4 : 7fd1f088 00000000 81431cac 81431ca0
+[ 3.916641] $ 8 : 00000000 ffffefff 8075cd34 00000000
+[ 3.922043] $12 : 806f8d40 f3e812b7 00000000 000d9aaa
+[ 3.927446] $16 : 7fd1f068 7fd1f080 7ff559b8 81428470
+[ 3.932848] $20 : 00000000 00000000 55590000 77d70000
+[ 3.938251] $24 : 00000018 00000010
+[ 3.943655] $28 : 81430000 81431e60 81431f28 800157fc
+[ 3.949058] Hi : 00000000
+[ 3.952013] Lo : 00000000
+[ 3.955019] epc : 80015808 setup_sigcontext+0x54/0x24c
+[ 3.960464] ra : 800157fc setup_sigcontext+0x48/0x24c
+[ 3.965913] Status: 10008703 KERNEL EXL IE
+[ 3.970216] Cause : 00800028 (ExcCode 0a)
+[ 3.974340] PrId : 0002a010 (Broadcom BMIPS4350)
+[ 3.979170] Modules linked in: ohci_platform ohci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
+[ 3.992907] Process init (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=77e22ec8)
+[ 4.000776] Stack : 81431ef4 7fd1f080 81431f28 81428470 7fd1f068 81431edc 7ff559b8 81428470
+[ 4.009467] 81431f28 7fd1f080 55590000 77d70000 77d5498c 80015c70 806f0000 8063ae74
+[ 4.018149] 08100002 81431f28 0000000a 08100002 81431f28 0000000a 77d6b418 00000003
+[ 4.026831] ffffffff 80016414 80080734 81431ecc 81431ecc 00000001 00000000 04000000
+[ 4.035512] 77d54874 00000000 00000000 00000000 00000000 00000012 00000002 00000000
+[ 4.044196] ...
+[ 4.046706] Call Trace:
+[ 4.049238] [<80015808>] setup_sigcontext+0x54/0x24c
+[ 4.054356] [<80015c70>] setup_frame+0xdc/0x124
+[ 4.059015] [<80016414>] do_notify_resume+0x1dc/0x288
+[ 4.064207] [<80011b50>] work_notifysig+0x10/0x18
+[ 4.069036]
+[ 4.070538] Code: 8fc300b4 00001025 26240008 <ac820000> ac830004 3c048063 0c0228aa 24846a00 26240010
+[ 4.080686]
+[ 4.082517] ---[ end trace 22a8edb41f5f983b ]---
+[ 4.087374] Kernel panic - not syncing: Fatal exception
+[ 4.092753] Rebooting in 1 seconds..
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+---
+ arch/mips/Kconfig | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -250,7 +250,6 @@ config ATH79
+ config BMIPS_GENERIC
+ bool "Broadcom Generic BMIPS kernel"
+ select ARCH_HAS_RESET_CONTROLLER
+- select ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
+ select ARCH_HAS_PHYS_TO_DMA
+ select BOOT_RAW
+ select NO_EXCEPT_FILL
+++ /dev/null
---- a/drivers/watchdog/bcm7038_wdt.c
-+++ b/drivers/watchdog/bcm7038_wdt.c
-@@ -34,6 +34,24 @@ struct bcm7038_watchdog {
-
- static bool nowayout = WATCHDOG_NOWAYOUT;
-
-+static inline void bcm7038_wdt_write(unsigned long data, void __iomem *reg)
-+{
-+#ifdef CONFIG_CPU_BIG_ENDIAN
-+ iowrite32be(data, reg);
-+#else
-+ writel(data, reg);
-+#endif
-+}
-+
-+static inline unsigned long bcm7038_wdt_read(void __iomem *reg)
-+{
-+#ifdef CONFIG_CPU_BIG_ENDIAN
-+ return ioread32be(reg);
-+#else
-+ return readl(reg);
-+#endif
-+}
-+
- static void bcm7038_wdt_set_timeout_reg(struct watchdog_device *wdog)
- {
- struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
-@@ -41,15 +59,15 @@ static void bcm7038_wdt_set_timeout_reg(
-
- timeout = wdt->rate * wdog->timeout;
-
-- writel(timeout, wdt->base + WDT_TIMEOUT_REG);
-+ bcm7038_wdt_write(timeout, wdt->base + WDT_TIMEOUT_REG);
- }
-
- static int bcm7038_wdt_ping(struct watchdog_device *wdog)
- {
- struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
-
-- writel(WDT_START_1, wdt->base + WDT_CMD_REG);
-- writel(WDT_START_2, wdt->base + WDT_CMD_REG);
-+ bcm7038_wdt_write(WDT_START_1, wdt->base + WDT_CMD_REG);
-+ bcm7038_wdt_write(WDT_START_2, wdt->base + WDT_CMD_REG);
-
- return 0;
- }
-@@ -66,8 +84,8 @@ static int bcm7038_wdt_stop(struct watch
- {
- struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
-
-- writel(WDT_STOP_1, wdt->base + WDT_CMD_REG);
-- writel(WDT_STOP_2, wdt->base + WDT_CMD_REG);
-+ bcm7038_wdt_write(WDT_STOP_1, wdt->base + WDT_CMD_REG);
-+ bcm7038_wdt_write(WDT_STOP_2, wdt->base + WDT_CMD_REG);
-
- return 0;
- }
-@@ -88,7 +106,7 @@ static unsigned int bcm7038_wdt_get_time
- struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
- u32 time_left;
-
-- time_left = readl(wdt->base + WDT_CMD_REG);
-+ time_left = bcm7038_wdt_read(wdt->base + WDT_CMD_REG);
-
- return time_left / wdt->rate;
- }
+++ /dev/null
-From 84c06b4a1dfa3e021fdbcafaff8cebfdec462402 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Tue, 23 Feb 2021 10:39:48 +0100
-Subject: [PATCH] mips: bmips: disable ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Enabling this option causes kernel panics on BCM6358 with EHCI/OHCI:
-[ 3.881739] usb 1-1: new high-speed USB device number 2 using ehci-platform
-[ 3.895011] Reserved instruction in kernel code[#1]:
-[ 3.900113] CPU: 0 PID: 1 Comm: init Not tainted 5.10.16 #0
-[ 3.905829] $ 0 : 00000000 10008700 00000000 77d94060
-[ 3.911238] $ 4 : 7fd1f088 00000000 81431cac 81431ca0
-[ 3.916641] $ 8 : 00000000 ffffefff 8075cd34 00000000
-[ 3.922043] $12 : 806f8d40 f3e812b7 00000000 000d9aaa
-[ 3.927446] $16 : 7fd1f068 7fd1f080 7ff559b8 81428470
-[ 3.932848] $20 : 00000000 00000000 55590000 77d70000
-[ 3.938251] $24 : 00000018 00000010
-[ 3.943655] $28 : 81430000 81431e60 81431f28 800157fc
-[ 3.949058] Hi : 00000000
-[ 3.952013] Lo : 00000000
-[ 3.955019] epc : 80015808 setup_sigcontext+0x54/0x24c
-[ 3.960464] ra : 800157fc setup_sigcontext+0x48/0x24c
-[ 3.965913] Status: 10008703 KERNEL EXL IE
-[ 3.970216] Cause : 00800028 (ExcCode 0a)
-[ 3.974340] PrId : 0002a010 (Broadcom BMIPS4350)
-[ 3.979170] Modules linked in: ohci_platform ohci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
-[ 3.992907] Process init (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=77e22ec8)
-[ 4.000776] Stack : 81431ef4 7fd1f080 81431f28 81428470 7fd1f068 81431edc 7ff559b8 81428470
-[ 4.009467] 81431f28 7fd1f080 55590000 77d70000 77d5498c 80015c70 806f0000 8063ae74
-[ 4.018149] 08100002 81431f28 0000000a 08100002 81431f28 0000000a 77d6b418 00000003
-[ 4.026831] ffffffff 80016414 80080734 81431ecc 81431ecc 00000001 00000000 04000000
-[ 4.035512] 77d54874 00000000 00000000 00000000 00000000 00000012 00000002 00000000
-[ 4.044196] ...
-[ 4.046706] Call Trace:
-[ 4.049238] [<80015808>] setup_sigcontext+0x54/0x24c
-[ 4.054356] [<80015c70>] setup_frame+0xdc/0x124
-[ 4.059015] [<80016414>] do_notify_resume+0x1dc/0x288
-[ 4.064207] [<80011b50>] work_notifysig+0x10/0x18
-[ 4.069036]
-[ 4.070538] Code: 8fc300b4 00001025 26240008 <ac820000> ac830004 3c048063 0c0228aa 24846a00 26240010
-[ 4.080686]
-[ 4.082517] ---[ end trace 22a8edb41f5f983b ]---
-[ 4.087374] Kernel panic - not syncing: Fatal exception
-[ 4.092753] Rebooting in 1 seconds..
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
----
- arch/mips/Kconfig | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -250,7 +250,6 @@ config ATH79
- config BMIPS_GENERIC
- bool "Broadcom Generic BMIPS kernel"
- select ARCH_HAS_RESET_CONTROLLER
-- select ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
- select ARCH_HAS_PHYS_TO_DMA
- select BOOT_RAW
- select NO_EXCEPT_FILL
--- /dev/null
+From 590b60fb08cb1e70fe02d3f407c6b3dbe9ad06ff Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Mon, 1 Mar 2021 07:34:39 +0100
+Subject: [PATCH 3/4] net: broadcom: add BCM6368 enetsw controller driver
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This controller is present on BCM6318, BCM6328, BCM6362, BCM6368 and BCM63268
+SoCs.
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+---
+ drivers/net/ethernet/broadcom/Kconfig | 8 +
+ drivers/net/ethernet/broadcom/Makefile | 1 +
+ .../net/ethernet/broadcom/bcm6368-enetsw.c | 1111 +++++++++++++++++
+ 3 files changed, 1120 insertions(+)
+ create mode 100644 drivers/net/ethernet/broadcom/bcm6368-enetsw.c
+
+--- a/drivers/net/ethernet/broadcom/Kconfig
++++ b/drivers/net/ethernet/broadcom/Kconfig
+@@ -60,6 +60,14 @@ config BCM63XX_ENET
+ This driver supports the ethernet MACs in the Broadcom 63xx
+ MIPS chipset family (BCM63XX).
+
++config BCM6368_ENETSW
++ tristate "Broadcom BCM6368 internal mac support"
++ depends on BMIPS_GENERIC || COMPILE_TEST
++ default y
++ help
++ This driver supports Ethernet controller integrated into Broadcom
++ BCM6368 family SoCs.
++
+ config BCMGENET
+ tristate "Broadcom GENET internal MAC support"
+ depends on HAS_IOMEM
+--- a/drivers/net/ethernet/broadcom/Makefile
++++ b/drivers/net/ethernet/broadcom/Makefile
+@@ -5,6 +5,7 @@
+
+ obj-$(CONFIG_B44) += b44.o
+ obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
++obj-$(CONFIG_BCM6368_ENETSW) += bcm6368-enetsw.o
+ obj-$(CONFIG_BCMGENET) += genet/
+ obj-$(CONFIG_BNX2) += bnx2.o
+ obj-$(CONFIG_CNIC) += cnic.o
+++ /dev/null
-From 590b60fb08cb1e70fe02d3f407c6b3dbe9ad06ff Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Mon, 1 Mar 2021 07:34:39 +0100
-Subject: [PATCH 3/4] net: broadcom: add BCM6368 enetsw controller driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This controller is present on BCM6318, BCM6328, BCM6362, BCM6368 and BCM63268
-SoCs.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
----
- drivers/net/ethernet/broadcom/Kconfig | 8 +
- drivers/net/ethernet/broadcom/Makefile | 1 +
- .../net/ethernet/broadcom/bcm6368-enetsw.c | 1111 +++++++++++++++++
- 3 files changed, 1120 insertions(+)
- create mode 100644 drivers/net/ethernet/broadcom/bcm6368-enetsw.c
-
---- a/drivers/net/ethernet/broadcom/Kconfig
-+++ b/drivers/net/ethernet/broadcom/Kconfig
-@@ -60,6 +60,14 @@ config BCM63XX_ENET
- This driver supports the ethernet MACs in the Broadcom 63xx
- MIPS chipset family (BCM63XX).
-
-+config BCM6368_ENETSW
-+ tristate "Broadcom BCM6368 internal mac support"
-+ depends on BMIPS_GENERIC || COMPILE_TEST
-+ default y
-+ help
-+ This driver supports Ethernet controller integrated into Broadcom
-+ BCM6368 family SoCs.
-+
- config BCMGENET
- tristate "Broadcom GENET internal MAC support"
- depends on HAS_IOMEM
---- a/drivers/net/ethernet/broadcom/Makefile
-+++ b/drivers/net/ethernet/broadcom/Makefile
-@@ -5,6 +5,7 @@
-
- obj-$(CONFIG_B44) += b44.o
- obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
-+obj-$(CONFIG_BCM6368_ENETSW) += bcm6368-enetsw.o
- obj-$(CONFIG_BCMGENET) += genet/
- obj-$(CONFIG_BNX2) += bnx2.o
- obj-$(CONFIG_CNIC) += cnic.o
+++ /dev/null
-From 32cf73d8c6485b7b97aca7e377a68436d09b7022 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Sun, 14 Mar 2021 20:03:44 +0100
-Subject: [PATCH] net: dsa: b53: add support for BCM63xx RGMIIs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
----
- drivers/net/dsa/b53/b53_common.c | 37 ++++++++++++++++++++++++++++++++
- 1 file changed, 37 insertions(+)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -1155,6 +1155,36 @@ static void b53_force_port_config(struct
- b53_write8(dev, B53_CTRL_PAGE, off, reg);
- }
-
-+static void b53_adjust_63xx_rgmii(struct dsa_switch *ds, int port,
-+ phy_interface_t interface)
-+{
-+ struct b53_device *dev = ds->priv;
-+ u8 rgmii_ctrl = 0, off;
-+
-+ if (port == 8)
-+ off = B53_RGMII_CTRL_IMP;
-+ else
-+ off = B53_RGMII_CTRL_P(port);
-+
-+ b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
-+
-+ rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
-+ if (interface == PHY_INTERFACE_MODE_RGMII_ID)
-+ rgmii_ctrl |= (RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
-+ else if (interface == PHY_INTERFACE_MODE_RGMII_RXID)
-+ rgmii_ctrl |= RGMII_CTRL_DLL_RXC;
-+ else if (interface == PHY_INTERFACE_MODE_RGMII_TXID)
-+ rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
-+
-+ if (port != B53_CPU_PORT)
-+ rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII;
-+
-+ b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
-+
-+ dev_info(ds->dev, "Configured port %d for %s\n", port,
-+ phy_modes(interface));
-+}
-+
- static void b53_adjust_link(struct dsa_switch *ds, int port,
- struct phy_device *phydev)
- {
-@@ -1181,6 +1211,9 @@ static void b53_adjust_link(struct dsa_s
- tx_pause, rx_pause);
- b53_force_link(dev, port, phydev->link);
-
-+ if (is63xx(dev))
-+ b53_adjust_63xx_rgmii(ds, port, phydev->interface);
-+
- if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
- if (port == 8)
- off = B53_RGMII_CTRL_IMP;
-@@ -1373,6 +1406,9 @@ void b53_phylink_mac_link_up(struct dsa_
- {
- struct b53_device *dev = ds->priv;
-
-+ if (is63xx(dev) && port >= 4)
-+ b53_adjust_63xx_rgmii(ds, port, interface);
-+
- if (mode == MLO_AN_PHY)
- return;
-
--- /dev/null
+From 32cf73d8c6485b7b97aca7e377a68436d09b7022 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Sun, 14 Mar 2021 20:03:44 +0100
+Subject: [PATCH] net: dsa: b53: add support for BCM63xx RGMIIs
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+---
+ drivers/net/dsa/b53/b53_common.c | 37 ++++++++++++++++++++++++++++++++
+ 1 file changed, 37 insertions(+)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -1155,6 +1155,36 @@ static void b53_force_port_config(struct
+ b53_write8(dev, B53_CTRL_PAGE, off, reg);
+ }
+
++static void b53_adjust_63xx_rgmii(struct dsa_switch *ds, int port,
++ phy_interface_t interface)
++{
++ struct b53_device *dev = ds->priv;
++ u8 rgmii_ctrl = 0, off;
++
++ if (port == 8)
++ off = B53_RGMII_CTRL_IMP;
++ else
++ off = B53_RGMII_CTRL_P(port);
++
++ b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
++
++ rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
++ if (interface == PHY_INTERFACE_MODE_RGMII_ID)
++ rgmii_ctrl |= (RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
++ else if (interface == PHY_INTERFACE_MODE_RGMII_RXID)
++ rgmii_ctrl |= RGMII_CTRL_DLL_RXC;
++ else if (interface == PHY_INTERFACE_MODE_RGMII_TXID)
++ rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
++
++ if (port != B53_CPU_PORT)
++ rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII;
++
++ b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
++
++ dev_info(ds->dev, "Configured port %d for %s\n", port,
++ phy_modes(interface));
++}
++
+ static void b53_adjust_link(struct dsa_switch *ds, int port,
+ struct phy_device *phydev)
+ {
+@@ -1181,6 +1211,9 @@ static void b53_adjust_link(struct dsa_s
+ tx_pause, rx_pause);
+ b53_force_link(dev, port, phydev->link);
+
++ if (is63xx(dev))
++ b53_adjust_63xx_rgmii(ds, port, phydev->interface);
++
+ if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
+ if (port == 8)
+ off = B53_RGMII_CTRL_IMP;
+@@ -1373,6 +1406,9 @@ void b53_phylink_mac_link_up(struct dsa_
+ {
+ struct b53_device *dev = ds->priv;
+
++ if (is63xx(dev) && port >= 4)
++ b53_adjust_63xx_rgmii(ds, port, interface);
++
+ if (mode == MLO_AN_PHY)
+ return;
+
projects / openwrt / staging / ynezz.git / commitdiff