#include "opal-fadump.h"
static const struct opal_fadump_mem_struct *opal_fdm_active;
+static const struct opal_mpipl_fadump *opal_cpu_metadata;
static struct opal_fadump_mem_struct *opal_fdm;
static int opal_fadump_unregister(struct fw_dump *fadump_conf);
pr_warn("Could not reset (%llu) kernel metadata tag!\n", ret);
}
+static inline void opal_fadump_set_regval_regnum(struct pt_regs *regs,
+ u32 reg_type, u32 reg_num,
+ u64 reg_val)
+{
+ if (reg_type == HDAT_FADUMP_REG_TYPE_GPR) {
+ if (reg_num < 32)
+ regs->gpr[reg_num] = reg_val;
+ return;
+ }
+
+ switch (reg_num) {
+ case SPRN_CTR:
+ regs->ctr = reg_val;
+ break;
+ case SPRN_LR:
+ regs->link = reg_val;
+ break;
+ case SPRN_XER:
+ regs->xer = reg_val;
+ break;
+ case SPRN_DAR:
+ regs->dar = reg_val;
+ break;
+ case SPRN_DSISR:
+ regs->dsisr = reg_val;
+ break;
+ case HDAT_FADUMP_REG_ID_NIP:
+ regs->nip = reg_val;
+ break;
+ case HDAT_FADUMP_REG_ID_MSR:
+ regs->msr = reg_val;
+ break;
+ case HDAT_FADUMP_REG_ID_CCR:
+ regs->ccr = reg_val;
+ break;
+ }
+}
+
+static inline void opal_fadump_read_regs(char *bufp, unsigned int regs_cnt,
+ unsigned int reg_entry_size,
+ struct pt_regs *regs)
+{
+ struct hdat_fadump_reg_entry *reg_entry;
+ int i;
+
+ memset(regs, 0, sizeof(struct pt_regs));
+
+ for (i = 0; i < regs_cnt; i++, bufp += reg_entry_size) {
+ reg_entry = (struct hdat_fadump_reg_entry *)bufp;
+ opal_fadump_set_regval_regnum(regs,
+ be32_to_cpu(reg_entry->reg_type),
+ be32_to_cpu(reg_entry->reg_num),
+ be64_to_cpu(reg_entry->reg_val));
+ }
+}
+
+/*
+ * Verify if CPU state data is available. If available, do a bit of sanity
+ * checking before processing this data.
+ */
+static bool __init is_opal_fadump_cpu_data_valid(struct fw_dump *fadump_conf)
+{
+ if (!opal_cpu_metadata)
+ return false;
+
+ fadump_conf->cpu_state_data_version =
+ be32_to_cpu(opal_cpu_metadata->cpu_data_version);
+ fadump_conf->cpu_state_entry_size =
+ be32_to_cpu(opal_cpu_metadata->cpu_data_size);
+ fadump_conf->cpu_state_dest_vaddr =
+ (u64)__va(be64_to_cpu(opal_cpu_metadata->region[0].dest));
+ fadump_conf->cpu_state_data_size =
+ be64_to_cpu(opal_cpu_metadata->region[0].size);
+
+ if (fadump_conf->cpu_state_data_version != HDAT_FADUMP_CPU_DATA_VER) {
+ pr_warn("Supported CPU state data version: %u, found: %d!\n",
+ HDAT_FADUMP_CPU_DATA_VER,
+ fadump_conf->cpu_state_data_version);
+ pr_warn("WARNING: F/W using newer CPU state data format!!\n");
+ }
+
+ if ((fadump_conf->cpu_state_dest_vaddr == 0) ||
+ (fadump_conf->cpu_state_entry_size == 0) ||
+ (fadump_conf->cpu_state_entry_size >
+ fadump_conf->cpu_state_data_size)) {
+ pr_err("CPU state data is invalid. Ignoring!\n");
+ return false;
+ }
+
+ return true;
+}
+
/*
* Convert CPU state data saved at the time of crash into ELF notes.
*
- * Append crashing CPU's register data saved by the kernel in the PT_NOTE.
+ * While the crashing CPU's register data is saved by the kernel, CPU state
+ * data for all CPUs is saved by f/w. In CPU state data provided by f/w,
+ * each register entry is of 16 bytes, a numerical identifier along with
+ * a GPR/SPR flag in the first 8 bytes and the register value in the next
+ * 8 bytes. For more details refer to F/W documentation. If this data is
+ * missing or in unsupported format, append crashing CPU's register data
+ * saved by the kernel in the PT_NOTE, to have something to work with in
+ * the vmcore file.
*/
static int __init
opal_fadump_build_cpu_notes(struct fw_dump *fadump_conf,
struct fadump_crash_info_header *fdh)
{
+ u32 thread_pir, size_per_thread, regs_offset, regs_cnt, reg_esize;
+ struct hdat_fadump_thread_hdr *thdr;
+ bool is_cpu_data_valid = false;
u32 num_cpus = 1, *note_buf;
- int rc;
-
- if (fdh->crashing_cpu == FADUMP_CPU_UNKNOWN)
- return -ENODEV;
+ struct pt_regs regs;
+ char *bufp;
+ int rc, i;
+
+ if (is_opal_fadump_cpu_data_valid(fadump_conf)) {
+ size_per_thread = fadump_conf->cpu_state_entry_size;
+ num_cpus = (fadump_conf->cpu_state_data_size / size_per_thread);
+ bufp = __va(fadump_conf->cpu_state_dest_vaddr);
+ is_cpu_data_valid = true;
+ }
- /* Allocate CPU notes buffer to hold crashing cpu notes. */
rc = fadump_setup_cpu_notes_buf(num_cpus);
if (rc != 0)
return rc;
note_buf = (u32 *)fadump_conf->cpu_notes_buf_vaddr;
- note_buf = fadump_regs_to_elf_notes(note_buf, &(fdh->regs));
+ if (!is_cpu_data_valid)
+ goto out;
+
+ /*
+ * Offset for register entries, entry size and registers count is
+ * duplicated in every thread header in keeping with HDAT format.
+ * Use these values from the first thread header.
+ */
+ thdr = (struct hdat_fadump_thread_hdr *)bufp;
+ regs_offset = (offsetof(struct hdat_fadump_thread_hdr, offset) +
+ be32_to_cpu(thdr->offset));
+ reg_esize = be32_to_cpu(thdr->esize);
+ regs_cnt = be32_to_cpu(thdr->ecnt);
+
+ pr_debug("--------CPU State Data------------\n");
+ pr_debug("NumCpus : %u\n", num_cpus);
+ pr_debug("\tOffset: %u, Entry size: %u, Cnt: %u\n",
+ regs_offset, reg_esize, regs_cnt);
+
+ for (i = 0; i < num_cpus; i++, bufp += size_per_thread) {
+ thdr = (struct hdat_fadump_thread_hdr *)bufp;
+
+ thread_pir = be32_to_cpu(thdr->pir);
+ pr_debug("[%04d] PIR: 0x%x, core state: 0x%02x\n",
+ i, thread_pir, thdr->core_state);
+
+ /*
+ * If this is kernel initiated crash, crashing_cpu would be set
+ * appropriately and register data of the crashing CPU saved by
+ * crashing kernel. Add this saved register data of crashing CPU
+ * to elf notes and populate the pt_regs for the remaining CPUs
+ * from register state data provided by firmware.
+ */
+ if (fdh->crashing_cpu == thread_pir) {
+ note_buf = fadump_regs_to_elf_notes(note_buf,
+ &fdh->regs);
+ pr_debug("Crashing CPU PIR: 0x%x - R1 : 0x%lx, NIP : 0x%lx\n",
+ fdh->crashing_cpu, fdh->regs.gpr[1],
+ fdh->regs.nip);
+ continue;
+ }
+
+ /*
+ * Register state data of MAX cores is provided by firmware,
+ * but some of this cores may not be active. So, while
+ * processing register state data, check core state and
+ * skip threads that belong to inactive cores.
+ */
+ if (thdr->core_state == HDAT_FADUMP_CORE_INACTIVE)
+ continue;
+
+ opal_fadump_read_regs((bufp + regs_offset), regs_cnt,
+ reg_esize, ®s);
+ note_buf = fadump_regs_to_elf_notes(note_buf, ®s);
+ pr_debug("CPU PIR: 0x%x - R1 : 0x%lx, NIP : 0x%lx\n",
+ thread_pir, regs.gpr[1], regs.nip);
+ }
+
+out:
+ /*
+ * CPU state data is invalid/unsupported. Try appending crashing CPU's
+ * register data, if it is saved by the kernel.
+ */
+ if (fadump_conf->cpu_notes_buf_vaddr == (u64)note_buf) {
+ if (fdh->crashing_cpu == FADUMP_CPU_UNKNOWN) {
+ fadump_free_cpu_notes_buf();
+ return -ENODEV;
+ }
+
+ pr_warn("WARNING: appending only crashing CPU's register data\n");
+ note_buf = fadump_regs_to_elf_notes(note_buf, &(fdh->regs));
+ }
+
final_note(note_buf);
pr_debug("Updating elfcore header (%llx) with cpu notes\n",
{
int rc;
+ /*
+ * Unlike on pSeries platform, logical CPU number is not provided
+ * with architected register state data. So, store the crashing
+ * CPU's PIR instead to plug the appropriate register data for
+ * crashing CPU in the vmcore file.
+ */
+ fdh->crashing_cpu = (u32)mfspr(SPRN_PIR);
+
rc = opal_cec_reboot2(OPAL_REBOOT_MPIPL, msg);
if (rc == OPAL_UNSUPPORTED) {
pr_emerg("Reboot type %d not supported.\n",
return;
}
+ ret = opal_mpipl_query_tag(OPAL_MPIPL_TAG_CPU, &addr);
+ if (addr) {
+ addr = be64_to_cpu(addr);
+ pr_debug("CPU metadata addr: %llx\n", addr);
+ opal_cpu_metadata = __va(addr);
+ }
+
pr_info("Firmware-assisted dump is active.\n");
fadump_conf->dump_active = 1;
opal_fadump_get_config(fadump_conf, opal_fdm_active);
projects / openwrt / staging / blogic.git / commitdiff