mvebu: use PHY LED trigger for speed LEDs on FortiGate 50E

Use <mdio>:<addr>:<speed> trigger instead of netdev(link) trigger for
Fortinet FortiGate 50E, to indicate link speed on the each phys.

1000 Mbps: Green
100 Mbps : Amber
10 Mbps  : (turn off)

Fixes: 102dc5a62506 ("mvebu: add support for Fortinet FortiGate 50E")
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>

diff --git a/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds b/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds
index bfc589e6c01cbfc63e680b3bee9e19ce2ccf548b..2b045d094574420f292739d95c2fccdbf50eed06 100644 (file)
--- a/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds
+++ b/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds
@@ -15,15 +15,6 @@ ctera,c200-v2)
        ucidef_set_led_usbport "usb2" "USB2" "green:usb-2" "usb1-port1" "usb2-port1"
        ucidef_set_led_usbport "usb3" "USB3" "green:usb-1" "usb1-port2" "usb2-port2"
        ;;
-fortinet,fg-50e)
-       ucidef_set_led_netdev "wan1_link" "WAN1 Link" "green:speed_wan1" "eth1" "link"
-       ucidef_set_led_netdev "wan2_link" "WAN2 Link" "green:speed_wan2" "eth2" "link"
-       ucidef_set_led_netdev "lan1_link" "LAN1 Link" "green:speed_lan1" "lan1" "link"
-       ucidef_set_led_netdev "lan2_link" "LAN2 Link" "green:speed_lan2" "lan2" "link"
-       ucidef_set_led_netdev "lan3_link" "LAN3 Link" "green:speed_lan3" "lan3" "link"
-       ucidef_set_led_netdev "lan4_link" "LAN4 Link" "green:speed_lan4" "lan4" "link"
-       ucidef_set_led_netdev "lan5_link" "LAN5 Link" "green:speed_lan5" "lan5" "link"
-       ;;
 kobol,helios4)
        ucidef_set_led_usbport "USB" "USB" "helios4:green:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1" "usb5-port1"
        ;;

diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts
index 506e01f0ff1b00f206e7f58a871ff17226914b02..61d2da1755ceef2ceb43b6728538ed4259277996 100644 (file)
--- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts
+++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts
@@ -97,72 +97,84 @@
                        label = "green:speed_wan1";
                        gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
                        color = <LED_COLOR_ID_GREEN>;
+                       linux,default-trigger = "f1072004.mdio-mii:00:1Gbps";
                };
 
                led-7 {
                        label = "green:speed_wan2";
                        gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
                        color = <LED_COLOR_ID_GREEN>;
+                       linux,default-trigger = "f1072004.mdio-mii:01:1Gbps";
                };
 
                led-8 {
                        label = "amber:speed_lan5";
                        gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
                        color = <LED_COLOR_ID_AMBER>;
+                       linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
                };
 
                led-9 {
                        label = "green:speed_lan5";
                        gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
                        color = <LED_COLOR_ID_GREEN>;
+                       linux,default-trigger = "mv88e6xxx-1:00:1Gbps";
                };
 
                led-10 {
                        label = "green:speed_lan4";
                        gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
                        color = <LED_COLOR_ID_GREEN>;
+                       linux,default-trigger = "mv88e6xxx-1:01:1Gbps";
                };
 
                led-11 {
                        label = "amber:speed_lan4";
                        gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
                        color = <LED_COLOR_ID_AMBER>;
+                       linux,default-trigger = "mv88e6xxx-1:01:100Mbps";
                };
 
                led-12 {
                        label = "amber:speed_lan3";
                        gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
                        color = <LED_COLOR_ID_AMBER>;
+                       linux,default-trigger = "mv88e6xxx-1:02:100Mbps";
                };
 
                led-13 {
                        label = "green:speed_lan3";
                        gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
                        color = <LED_COLOR_ID_GREEN>;
+                       linux,default-trigger = "mv88e6xxx-1:02:1Gbps";
                };
 
                led-14 {
                        label = "green:speed_lan1";
                        gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
                        color = <LED_COLOR_ID_GREEN>;
+                       linux,default-trigger = "mv88e6xxx-1:04:1Gbps";
                };
 
                led-15 {
                        label = "amber:speed_lan1";
                        gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
                        color = <LED_COLOR_ID_AMBER>;
+                       linux,default-trigger = "mv88e6xxx-1:04:100Mbps";
                };
 
                led-16 {
                        label = "green:speed_lan2";
                        gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
                        color = <LED_COLOR_ID_GREEN>;
+                       linux,default-trigger = "mv88e6xxx-1:03:1Gbps";
                };
 
                led-17 {
                        label = "amber:speed_lan2";
                        gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
                        color = <LED_COLOR_ID_AMBER>;
+                       linux,default-trigger = "mv88e6xxx-1:03:100Mbps";
                };
        };