#include <asm/portmux.h>
#include <asm/bfin_sdh.h>
-#if defined(CONFIG_BF51x)
-#define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CTL
-#define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CTL
+#if defined(CONFIG_BF51x) || defined(__ADSPBF60x__)
#define bfin_read_SDH_CLK_CTL bfin_read_RSI_CLK_CTL
#define bfin_write_SDH_CLK_CTL bfin_write_RSI_CLK_CTL
#define bfin_write_SDH_ARGUMENT bfin_write_RSI_ARGUMENT
#define bfin_write_SDH_E_STATUS bfin_write_RSI_E_STATUS
#define bfin_read_SDH_STATUS bfin_read_RSI_STATUS
#define bfin_write_SDH_MASK0 bfin_write_RSI_MASK0
+#define bfin_write_SDH_E_MASK bfin_write_RSI_E_MASK
#define bfin_read_SDH_CFG bfin_read_RSI_CFG
#define bfin_write_SDH_CFG bfin_write_RSI_CFG
+# if defined(__ADSPBF60x__)
+# define bfin_read_SDH_BLK_SIZE bfin_read_RSI_BLKSZ
+# define bfin_write_SDH_BLK_SIZE bfin_write_RSI_BLKSZ
+# else
+# define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CTL
+# define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CTL
+# endif
#endif
struct sdh_host {
dma_addr_t sg_dma;
int dma_len;
+ unsigned long sclk;
unsigned int imask;
unsigned int power_mode;
unsigned int clk_div;
/* Only supports power-of-2 block size */
if (data->blksz & (data->blksz - 1))
return -EINVAL;
+#ifndef RSI_BLKSZ
data_ctl |= ((ffs(data->blksz) - 1) << 4);
+#else
+ bfin_write_SDH_BLK_SIZE(data->blksz);
+#endif
bfin_write_SDH_DATA_CTL(data_ctl);
/* the time of a host clock period in ns */
- cycle_ns = 1000000000 / (get_sclk() / (2 * (host->clk_div + 1)));
+ cycle_ns = 1000000000 / (host->sclk / (2 * (host->clk_div + 1)));
timeout = data->timeout_ns / cycle_ns;
timeout += data->timeout_clks;
bfin_write_SDH_DATA_TIMER(timeout);
sdh_enable_stat_irq(host, (DAT_CRC_FAIL | DAT_TIME_OUT | DAT_END));
host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma_dir);
-#if defined(CONFIG_BF54x)
- dma_cfg |= DMAFLOW_ARRAY | NDSIZE_5 | RESTART | WDSIZE_32 | DMAEN;
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
+ dma_cfg |= DMAFLOW_ARRAY | RESTART | WDSIZE_32 | DMAEN;
+# ifdef RSI_BLKSZ
+ dma_cfg |= PSIZE_32 | NDSIZE_3;
+# else
+ dma_cfg |= NDSIZE_5;
+# endif
{
struct scatterlist *sg;
int i;
host->sg_cpu[i].x_count = sg_dma_len(sg) / 4;
host->sg_cpu[i].x_modify = 4;
dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, "
- "cfg:0x%x, x_count:0x%x, x_modify:0x%x\n",
+ "cfg:0x%lx, x_count:0x%lx, x_modify:0x%lx\n",
i, host->sg_cpu[i].start_addr,
host->sg_cpu[i].cfg, host->sg_cpu[i].x_count,
host->sg_cpu[i].x_modify);
set_dma_curr_desc_addr(host->dma_ch, (unsigned long *)host->sg_dma);
set_dma_x_count(host->dma_ch, 0);
set_dma_x_modify(host->dma_ch, 0);
+ SSYNC();
set_dma_config(host->dma_ch, dma_cfg);
#elif defined(CONFIG_BF51x)
/* RSI DMA doesn't work in array mode */
set_dma_start_addr(host->dma_ch, sg_dma_address(&data->sg[0]));
set_dma_x_count(host->dma_ch, length / 4);
set_dma_x_modify(host->dma_ch, 4);
+ SSYNC();
set_dma_config(host->dma_ch, dma_cfg);
#endif
bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E);
else
data->bytes_xfered = 0;
- sdh_disable_stat_irq(host, DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN | TX_UNDERRUN);
bfin_write_SDH_STATUS_CLR(DAT_END_STAT | DAT_TIMEOUT_STAT | \
DAT_CRC_FAIL_STAT | DAT_BLK_END_STAT | RX_OVERRUN | TX_UNDERRUN);
bfin_write_SDH_DATA_CTL(0);
dev_dbg(mmc_dev(host->mmc), "%s enter, mrp:%p, cmd:%p\n", __func__, mrq, mrq->cmd);
WARN_ON(host->mrq != NULL);
+ spin_lock(&host->lock);
host->mrq = mrq;
host->data = mrq->data;
if (mrq->data && mrq->data->flags & MMC_DATA_READ) {
ret = sdh_setup_data(host, mrq->data);
if (ret)
- return;
+ goto data_err;
}
sdh_start_cmd(host, mrq->cmd);
+data_err:
+ spin_unlock(&host->lock);
}
static void sdh_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct sdh_host *host;
- unsigned long flags;
u16 clk_ctl = 0;
+#ifndef RSI_BLKSZ
u16 pwr_ctl = 0;
+#endif
u16 cfg;
host = mmc_priv(mmc);
- spin_lock_irqsave(&host->lock, flags);
- if (ios->clock) {
- unsigned long sys_clk, ios_clk;
- unsigned char clk_div;
- ios_clk = 2 * ios->clock;
- sys_clk = get_sclk();
- clk_div = sys_clk / ios_clk;
- if (sys_clk % ios_clk == 0)
- clk_div -= 1;
- clk_div = min_t(unsigned char, clk_div, 0xFF);
- clk_ctl |= clk_div;
- clk_ctl |= CLK_E;
- host->clk_div = clk_div;
- } else
- sdh_stop_clock(host);
-
- if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
-#ifdef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
- pwr_ctl |= ROD_CTL;
-#else
- pwr_ctl |= SD_CMD_OD | ROD_CTL;
-#endif
+ spin_lock(&host->lock);
- if (ios->bus_width == MMC_BUS_WIDTH_4) {
- cfg = bfin_read_SDH_CFG();
+ cfg = bfin_read_SDH_CFG();
+ cfg |= MWE;
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_4:
+#ifndef RSI_BLKSZ
cfg &= ~PD_SDDAT3;
+#endif
cfg |= PUP_SDDAT3;
/* Enable 4 bit SDIO */
- cfg |= (SD4E | MWE);
- bfin_write_SDH_CFG(cfg);
- clk_ctl |= WIDE_BUS;
- } else {
- cfg = bfin_read_SDH_CFG();
- cfg |= MWE;
- bfin_write_SDH_CFG(cfg);
+ cfg |= SD4E;
+ clk_ctl |= WIDE_BUS_4;
+ break;
+ case MMC_BUS_WIDTH_8:
+#ifndef RSI_BLKSZ
+ cfg &= ~PD_SDDAT3;
+#endif
+ cfg |= PUP_SDDAT3;
+ /* Disable 4 bit SDIO */
+ cfg &= ~SD4E;
+ clk_ctl |= BYTE_BUS_8;
+ break;
+ default:
+ cfg &= ~PUP_SDDAT3;
+ /* Disable 4 bit SDIO */
+ cfg &= ~SD4E;
}
- bfin_write_SDH_CLK_CTL(clk_ctl);
-
host->power_mode = ios->power_mode;
- if (ios->power_mode == MMC_POWER_ON)
+#ifndef RSI_BLKSZ
+ if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
+ pwr_ctl |= ROD_CTL;
+# ifndef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
+ pwr_ctl |= SD_CMD_OD;
+# endif
+ }
+
+ if (ios->power_mode != MMC_POWER_OFF)
pwr_ctl |= PWR_ON;
+ else
+ pwr_ctl &= ~PWR_ON;
bfin_write_SDH_PWR_CTL(pwr_ctl);
+#else
+# ifndef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
+ if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
+ cfg |= SD_CMD_OD;
+ else
+ cfg &= ~SD_CMD_OD;
+# endif
+
+
+ if (ios->power_mode != MMC_POWER_OFF)
+ cfg |= PWR_ON;
+ else
+ cfg &= ~PWR_ON;
+
+ bfin_write_SDH_CFG(cfg);
+#endif
SSYNC();
- spin_unlock_irqrestore(&host->lock, flags);
+ if (ios->power_mode == MMC_POWER_ON && ios->clock) {
+ unsigned char clk_div;
+ clk_div = (get_sclk() / ios->clock - 1) / 2;
+ clk_div = min_t(unsigned char, clk_div, 0xFF);
+ clk_ctl |= clk_div;
+ clk_ctl |= CLK_E;
+ host->clk_div = clk_div;
+ bfin_write_SDH_CLK_CTL(clk_ctl);
+
+ } else
+ sdh_stop_clock(host);
+
+ /* set up sdh interrupt mask*/
+ if (ios->power_mode == MMC_POWER_ON)
+ bfin_write_SDH_MASK0(DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL |
+ RX_OVERRUN | TX_UNDERRUN | CMD_SENT | CMD_RESP_END |
+ CMD_TIME_OUT | CMD_CRC_FAIL);
+ else
+ bfin_write_SDH_MASK0(0);
+ SSYNC();
+
+ spin_unlock(&host->lock);
dev_dbg(mmc_dev(host->mmc), "SDH: clk_div = 0x%x actual clock:%ld expected clock:%d\n",
host->clk_div,
{
struct sdh_host *host = devid;
- dev_dbg(mmc_dev(host->mmc), "%s enter, irq_stat: 0x%04x\n", __func__,
+ dev_dbg(mmc_dev(host->mmc), "%s enter, irq_stat: 0x%04lx\n", __func__,
get_dma_curr_irqstat(host->dma_ch));
clear_dma_irqstat(host->dma_ch);
SSYNC();
int handled = 0;
dev_dbg(mmc_dev(host->mmc), "%s enter\n", __func__);
+
+ spin_lock(&host->lock);
+
status = bfin_read_SDH_E_STATUS();
if (status & SD_CARD_DET) {
mmc_detect_change(host->mmc, 0);
if (status & (DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN | TX_UNDERRUN))
handled |= sdh_data_done(host, status);
+ spin_unlock(&host->lock);
+
dev_dbg(mmc_dev(host->mmc), "%s exit\n\n", __func__);
return IRQ_RETVAL(handled);
}
mmc->ops = &sdh_ops;
-#if defined(CONFIG_BF54x)
- mmc->max_segs = 32;
-#elif defined(CONFIG_BF51x)
+#if defined(CONFIG_BF51x)
mmc->max_segs = 1;
+#else
+ mmc->max_segs = PAGE_SIZE / sizeof(struct dma_desc_array);
#endif
+#ifdef RSI_BLKSZ
+ mmc->max_seg_size = -1;
+#else
mmc->max_seg_size = 1 << 16;
+#endif
mmc->max_blk_size = 1 << 11;
mmc->max_blk_count = 1 << 11;
mmc->max_req_size = PAGE_SIZE;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NEEDS_POLL;
host = mmc_priv(mmc);
host->mmc = mmc;
+ host->sclk = get_sclk();
spin_lock_init(&host->lock);
host->irq = drv_data->irq_int0;
}
platform_set_drvdata(pdev, mmc);
- mmc_add_host(mmc);
ret = request_irq(host->irq, sdh_stat_irq, 0, "SDH Status IRQ", host);
if (ret) {
bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
SSYNC();
- /* Disable card inserting detection pin. set MMC_CAP_NEES_POLL, and
+ /* Disable card inserting detection pin. set MMC_CAP_NEEDS_POLL, and
* mmc stack will do the detection.
*/
bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3));
SSYNC();
+ mmc_add_host(mmc);
return 0;
out4:
if (mmc)
ret = mmc_suspend_host(mmc);
+#ifndef RSI_BLKSZ
bfin_write_SDH_PWR_CTL(bfin_read_SDH_PWR_CTL() & ~PWR_ON);
+#else
+ bfin_write_SDH_CFG(bfin_read_SDH_CFG() & ~PWR_ON);
+#endif
peripheral_free_list(drv_data->pin_req);
return ret;
return ret;
}
- bfin_write_SDH_PWR_CTL(bfin_read_SDH_PWR_CTL() | PWR_ON);
#if defined(CONFIG_BF54x)
/* Secure Digital Host shares DMA with Nand controller */
bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
#endif
+#ifndef RSI_BLKSZ
+ bfin_write_SDH_PWR_CTL(bfin_read_SDH_PWR_CTL() | PWR_ON);
bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
+#else
+ bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN | PWR_ON);
+#endif
SSYNC();
bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3));
projects / openwrt / staging / blogic.git / commitdiff