x86: use specialized routine for setup per-cpu area

We use the same routing as x86_64, moved now to setup.c.
Just with a few ifdefs inside.
Note that this routing uses prefill_possible_map().
It has the very nice side effect of allowing hotplugging of
cpus that are marked as present but disabled by acpi bios.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index dbdd3142215ce148e2010f28e90ccc47c7836a97..fd27048087b838f7eab08b1cd941ccd8588a50b2 100644 (file)
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -117,7 +117,7 @@ config ARCH_HAS_CPU_RELAX
        def_bool y
 
 config HAVE_SETUP_PER_CPU_AREA
-       def_bool X86_64
+       def_bool X86_64 || (X86_SMP && !X86_VOYAGER)
 
 config ARCH_HIBERNATION_POSSIBLE
        def_bool y

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index c436e747f50277cf6784692a8e1523d4ec5105b3..5d33509fd1c1fc1d59058f53f2348fcdde3093ae 100644 (file)
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -18,7 +18,7 @@ CFLAGS_tsc_64.o               := $(nostackp)
 obj-y                  := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
 obj-y                  += traps_$(BITS).o irq_$(BITS).o
 obj-y                  += time_$(BITS).o ioport.o ldt.o
-obj-y                  += setup_$(BITS).o i8259_$(BITS).o
+obj-y                  += setup_$(BITS).o i8259_$(BITS).o setup.o
 obj-$(CONFIG_X86_32)   += sys_i386_32.o i386_ksyms_32.o
 obj-$(CONFIG_X86_64)   += sys_x86_64.o x8664_ksyms_64.o
 obj-$(CONFIG_X86_64)   += syscall_64.o vsyscall_64.o setup64.o

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
new file mode 100644 (file)
index 0000000..1179aa0
--- /dev/null
+++ b/arch/x86/kernel/setup.c
@@ -0,0 +1,103 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/percpu.h>
+#include <asm/smp.h>
+#include <asm/percpu.h>
+#include <asm/sections.h>
+#include <asm/processor.h>
+#include <asm/setup.h>
+#include <asm/topology.h>
+
+#ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
+/*
+ * Copy data used in early init routines from the initial arrays to the
+ * per cpu data areas.  These arrays then become expendable and the
+ * *_early_ptr's are zeroed indicating that the static arrays are gone.
+ */
+static void __init setup_per_cpu_maps(void)
+{
+       int cpu;
+
+       for_each_possible_cpu(cpu) {
+#ifdef CONFIG_SMP
+               if (per_cpu_offset(cpu)) {
+#endif
+                       per_cpu(x86_cpu_to_apicid, cpu) =
+                                               x86_cpu_to_apicid_init[cpu];
+                       per_cpu(x86_bios_cpu_apicid, cpu) =
+                                               x86_bios_cpu_apicid_init[cpu];
+#ifdef CONFIG_NUMA
+                       per_cpu(x86_cpu_to_node_map, cpu) =
+                                               x86_cpu_to_node_map_init[cpu];
+#endif
+#ifdef CONFIG_SMP
+               } else
+                       printk(KERN_NOTICE "per_cpu_offset zero for cpu %d\n",
+                                                                       cpu);
+#endif
+       }
+
+       /* indicate the early static arrays will soon be gone */
+       x86_cpu_to_apicid_early_ptr = NULL;
+       x86_bios_cpu_apicid_early_ptr = NULL;
+#ifdef CONFIG_NUMA
+       x86_cpu_to_node_map_early_ptr = NULL;
+#endif
+}
+
+#ifdef CONFIG_X86_32
+/*
+ * Great future not-so-futuristic plan: make i386 and x86_64 do it
+ * the same way
+ */
+unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(__per_cpu_offset);
+#endif
+
+/*
+ * Great future plan:
+ * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
+ * Always point %gs to its beginning
+ */
+void __init setup_per_cpu_areas(void)
+{
+       int i;
+       unsigned long size;
+
+#ifdef CONFIG_HOTPLUG_CPU
+       prefill_possible_map();
+#endif
+
+       /* Copy section for each CPU (we discard the original) */
+       size = PERCPU_ENOUGH_ROOM;
+
+       printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n",
+                         size);
+       for_each_cpu_mask(i, cpu_possible_map) {
+               char *ptr;
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+               ptr = alloc_bootmem_pages(size);
+#else
+               int node = early_cpu_to_node(i);
+               if (!node_online(node) || !NODE_DATA(node))
+                       ptr = alloc_bootmem_pages(size);
+               else
+                       ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
+#endif
+               if (!ptr)
+                       panic("Cannot allocate cpu data for CPU %d\n", i);
+#ifdef CONFIG_X86_64
+               cpu_pda(i)->data_offset = ptr - __per_cpu_start;
+#else
+               __per_cpu_offset[i] = ptr - __per_cpu_start;
+#endif
+               memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+       }
+
+       /* setup percpu data maps early */
+       setup_per_cpu_maps();
+}
+
+#endif

diff --git a/arch/x86/kernel/setup64.c b/arch/x86/kernel/setup64.c
index e24c4567709456f89d52f1a49221395c4bd5c39c..6b4e3262e8cb88e068ce0636f075f176dd2b4dd9 100644 (file)
--- a/arch/x86/kernel/setup64.c
+++ b/arch/x86/kernel/setup64.c
@@ -85,83 +85,6 @@ static int __init nonx32_setup(char *str)
 }
 __setup("noexec32=", nonx32_setup);
 
-/*
- * Copy data used in early init routines from the initial arrays to the
- * per cpu data areas.  These arrays then become expendable and the
- * *_early_ptr's are zeroed indicating that the static arrays are gone.
- */
-static void __init setup_per_cpu_maps(void)
-{
-       int cpu;
-
-       for_each_possible_cpu(cpu) {
-#ifdef CONFIG_SMP
-               if (per_cpu_offset(cpu)) {
-#endif
-                       per_cpu(x86_cpu_to_apicid, cpu) =
-                                               x86_cpu_to_apicid_init[cpu];
-                       per_cpu(x86_bios_cpu_apicid, cpu) =
-                                               x86_bios_cpu_apicid_init[cpu];
-#ifdef CONFIG_NUMA
-                       per_cpu(x86_cpu_to_node_map, cpu) =
-                                               x86_cpu_to_node_map_init[cpu];
-#endif
-#ifdef CONFIG_SMP
-               }
-               else
-                       printk(KERN_NOTICE "per_cpu_offset zero for cpu %d\n",
-                                                                       cpu);
-#endif
-       }
-
-       /* indicate the early static arrays will soon be gone */
-       x86_cpu_to_apicid_early_ptr = NULL;
-       x86_bios_cpu_apicid_early_ptr = NULL;
-#ifdef CONFIG_NUMA
-       x86_cpu_to_node_map_early_ptr = NULL;
-#endif
-}
-
-/*
- * Great future plan:
- * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
- * Always point %gs to its beginning
- */
-void __init setup_per_cpu_areas(void)
-{ 
-       int i;
-       unsigned long size;
-
-#ifdef CONFIG_HOTPLUG_CPU
-       prefill_possible_map();
-#endif
-
-       /* Copy section for each CPU (we discard the original) */
-       size = PERCPU_ENOUGH_ROOM;
-
-       printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n", size);
-       for_each_cpu_mask (i, cpu_possible_map) {
-               char *ptr;
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-               ptr = alloc_bootmem_pages(size);
-#else
-               int node = early_cpu_to_node(i);
-
-               if (!node_online(node) || !NODE_DATA(node))
-                       ptr = alloc_bootmem_pages(size);
-               else
-                       ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
-#endif
-               if (!ptr)
-                       panic("Cannot allocate cpu data for CPU %d\n", i);
-               cpu_pda(i)->data_offset = ptr - __per_cpu_start;
-               memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
-       }
-
-       /* setup percpu data maps early */
-       setup_per_cpu_maps();
-} 
-
 void pda_init(int cpu)
 { 
        struct x8664_pda *pda = cpu_pda(cpu);

diff --git a/arch/x86/kernel/smpboot_32.c b/arch/x86/kernel/smpboot_32.c
index 92a5df6190b5df5a7fc9e074b64c6a4cfc8a351b..bf5c9e9f26c11299313cdf9d022cbb16f5797d0d 100644 (file)
--- a/arch/x86/kernel/smpboot_32.c
+++ b/arch/x86/kernel/smpboot_32.c
@@ -665,6 +665,7 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
                unmap_cpu_to_logical_apicid(cpu);
                cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */
                cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */
+               cpu_clear(cpu, cpu_possible_map);
                cpucount--;
        } else {
                per_cpu(x86_cpu_to_apicid, cpu) = apicid;
@@ -743,6 +744,7 @@ EXPORT_SYMBOL(xquad_portio);
 
 static void __init disable_smp(void)
 {
+       cpu_possible_map = cpumask_of_cpu(0);
        smpboot_clear_io_apic_irqs();
        phys_cpu_present_map = physid_mask_of_physid(0);
        map_cpu_to_logical_apicid();