Revert "mtd: rawnand: sunxi: Add A23/A33 DMA support"

This reverts commit c49836f05aa15282f7280e06ede3f6f8a6324833.

The commit is wrong and its approach actually does not work. Let's
revert it in order to add the feature with a clean patch.

Fixes: c49836f05aa1 ("mtd: rawnand: sunxi: Add A23/A33 DMA support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index b021a5720b42b350d679cd43a55968796d9a8f73..e93f39bc2bc55dd215fc12882965b1a22d332917 100644 (file)
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -43,7 +43,6 @@
 #define NFC_REG_RCMD_SET       0x0028
 #define NFC_REG_WCMD_SET       0x002C
 #define NFC_REG_A10_IO_DATA    0x0030
-#define NFC_REG_A23_IO_DATA    0x0300
 #define NFC_REG_ECC_CTL                0x0034
 #define NFC_REG_ECC_ST         0x0038
 #define NFC_REG_DEBUG          0x003C
@@ -205,14 +204,10 @@ static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand)
  * NAND Controller capabilities structure: stores NAND controller capabilities
  * for distinction between compatible strings.
  *
- * @sram_through_ahb:  On A23, we choose to access the internal RAM through AHB
- *                      instead of MBUS (less configuration). A10, A10s, A13 and
- *                      A20 use the MBUS but no extra configuration is needed.
  * @reg_io_data:       I/O data register
  * @dma_maxburst:      DMA maxburst
  */
 struct sunxi_nfc_caps {
-       bool sram_through_ahb;
        unsigned int reg_io_data;
        unsigned int dma_maxburst;
 };
@@ -368,29 +363,10 @@ static int sunxi_nfc_dma_op_prepare(struct sunxi_nfc *nfc, const void *buf,
                goto err_unmap_buf;
        }
 
-       /*
-        * On A23, we suppose the "internal RAM" (p.12 of the NFC user manual)
-        * refers to the NAND controller's internal SRAM. This memory is mapped
-        * and so is accessible from the AHB. It seems that it can also be
-        * accessed by the MBUS. MBUS accesses are mandatory when using the
-        * internal DMA instead of the external DMA engine.
-        *
-        * During DMA I/O operation, either we access this memory from the AHB
-        * by clearing the NFC_RAM_METHOD bit, or we set the bit and use the
-        * MBUS. In this case, we should also configure the MBUS DMA length
-        * NFC_REG_MDMA_CNT(0xC4) to be chunksize * nchunks. NAND I/O over MBUS
-        * are also limited to 32kiB pages.
-        */
-       if (nfc->caps->sram_through_ahb)
-               writel(readl(nfc->regs + NFC_REG_CTL) & ~NFC_RAM_METHOD,
-                      nfc->regs + NFC_REG_CTL);
-       else
-               writel(readl(nfc->regs + NFC_REG_CTL) | NFC_RAM_METHOD,
-                      nfc->regs + NFC_REG_CTL);
-
+       writel(readl(nfc->regs + NFC_REG_CTL) | NFC_RAM_METHOD,
+              nfc->regs + NFC_REG_CTL);
        writel(nchunks, nfc->regs + NFC_REG_SECTOR_NUM);
        writel(chunksize, nfc->regs + NFC_REG_CNT);
-
        dmat = dmaengine_submit(dmad);
 
        ret = dma_submit_error(dmat);
@@ -2199,21 +2175,11 @@ static const struct sunxi_nfc_caps sunxi_nfc_a10_caps = {
        .dma_maxburst = 4,
 };
 
-static const struct sunxi_nfc_caps sunxi_nfc_a23_caps = {
-       .sram_through_ahb = true,
-       .reg_io_data = NFC_REG_A23_IO_DATA,
-       .dma_maxburst = 8,
-};
-
 static const struct of_device_id sunxi_nfc_ids[] = {
        {
                .compatible = "allwinner,sun4i-a10-nand",
                .data = &sunxi_nfc_a10_caps,
        },
-       {
-               .compatible = "allwinner,sun8i-a23-nand-controller",
-               .data = &sunxi_nfc_a23_caps,
-       },
        { /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sunxi_nfc_ids);