ARCH:=arm
BOARD:=orion
BOARDNAME:=Marvell Orion
-FEATURES:=squashfs
-SUBTARGETS=generic harddisk
+SUBTARGETS:=generic harddisk
CFLAGS=-Os -pipe -march=armv5t -mtune=xscale -funit-at-a-time
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
KERNELNAME:="uImage"
-DEFAULT_PACKAGES += kmod-ath9k wpad-mini
+DEFAULT_PACKAGES += kmod-crypto-mv-cesa
$(eval $(call BuildTarget))
+++ /dev/null
-#!/bin/sh
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-#
-# This script sets system defaults for the hardware on firstboot
-#
-
-local hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo`
-
-wrt350nv2_default() {
-# leds
- uci batch <<__EOF
-set system.power_led=led
-set system.power_led.name='Power LED (green)'
-set system.power_led.sysfs='wrt350nv2:green:power'
-set system.power_led.default='1'
-set system.wifi_led=led
-set system.wifi_led.name='Wireless LED (green)'
-set system.wifi_led.sysfs='wrt350nv2:green:wireless'
-set system.wifi_led.trigger='netdev'
-set system.wifi_led.dev='wlan0'
-set system.wifi_led.mode='link tx rx'
-set system.wifi_led.default='0'
-commit system
-__EOF
-
-# add mac address from U-Boot partition to lan and wan devices
- MTD=`grep -e 'u-boot' /proc/mtd`
- MTD=`echo ${MTD} | sed 's/[a-z]*\([0-9]*\):.*/\1/'`
- [ -n "${MTD}" ] && {
- MACADDR=`dd if=/dev/mtdblock${MTD} bs=1 skip=262048 count=6 2>/dev/null | hexdump -e '1/1 "%02x"'`
- MACADDR2=$(( 0x${MACADDR} + 1))
- MACADDR2=`printf "%012x" ${MACADDR2}`
-
- MACADDR=`echo ${MACADDR} | sed 's/\(..\)/\1:/g' | sed 's/:$//'`
- MACADDR2=`echo ${MACADDR2} | sed 's/\(..\)/\1:/g' | sed 's/:$//'`
-
- uci set network.eth0.macaddr=${MACADDR}
- uci set network.lan.macaddr=${MACADDR}
- uci set network.wan.macaddr=${MACADDR2}
- uci commit network
- }
-}
-
-case "${hardware}" in
- 'Linksys WRT350N v2')
- wrt350nv2_default
- ;;
-esac
+++ /dev/null
-# use default "image" for PART_NAME
-# use default for platform_do_upgrade()
-
-platform_check_image() {
- [ "${ARGC}" -gt 1 ] && { echo 'Too many arguments. Only flash file expected.'; return 1; }
-
- local hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo`
- local magic="$(get_magic_word "$1")"
-
- case "${hardware}" in
- # hardware with padded uImage + padded rootfs
- 'Linksys WRT350N v2')
- [ "${magic}" != '2705' ] && {
- echo "Invalid image type ${magic}."
- return 1
- }
- return 0
- ;;
- # Netgear WNR854T has extra header before uImage
- 'Netgear WNR854T')
- [ "${magic}" != '8519' ] && {
- echo "Invalid image type ${magic}."
- return 1
- }
- return 0
- ;;
- esac
-
- echo "Sysupgrade is not yet supported on ${hardware}."
- return 1
-}
--- /dev/null
+#!/bin/sh
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+#
+# This script sets system defaults for the hardware on firstboot
+#
+
+local hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo`
+
+wrt350nv2_default() {
+# leds
+ uci batch <<__EOF
+set system.power_led=led
+set system.power_led.name='Power LED (green)'
+set system.power_led.sysfs='wrt350nv2:green:power'
+set system.power_led.default='1'
+set system.wifi_led=led
+set system.wifi_led.name='Wireless LED (green)'
+set system.wifi_led.sysfs='wrt350nv2:green:wireless'
+set system.wifi_led.trigger='netdev'
+set system.wifi_led.dev='wlan0'
+set system.wifi_led.mode='link tx rx'
+set system.wifi_led.default='0'
+commit system
+__EOF
+
+# add mac address from U-Boot partition to lan and wan devices
+ MTD=`grep -e 'u-boot' /proc/mtd`
+ MTD=`echo ${MTD} | sed 's/[a-z]*\([0-9]*\):.*/\1/'`
+ [ -n "${MTD}" ] && {
+ MACADDR=`dd if=/dev/mtdblock${MTD} bs=1 skip=262048 count=6 2>/dev/null | hexdump -e '1/1 "%02x"'`
+ MACADDR2=$(( 0x${MACADDR} + 1))
+ MACADDR2=`printf "%012x" ${MACADDR2}`
+
+ MACADDR=`echo ${MACADDR} | sed 's/\(..\)/\1:/g' | sed 's/:$//'`
+ MACADDR2=`echo ${MACADDR2} | sed 's/\(..\)/\1:/g' | sed 's/:$//'`
+
+ uci set network.eth0.macaddr=${MACADDR}
+ uci set network.lan.macaddr=${MACADDR}
+ uci set network.wan.macaddr=${MACADDR2}
+ uci commit network
+ }
+}
+
+case "${hardware}" in
+ 'Linksys WRT350N v2')
+ wrt350nv2_default
+ ;;
+esac
--- /dev/null
+# use default "image" for PART_NAME
+# use default for platform_do_upgrade()
+
+platform_check_image() {
+ [ "${ARGC}" -gt 1 ] && { echo 'Too many arguments. Only flash file expected.'; return 1; }
+
+ local hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo`
+ local magic="$(get_magic_word "$1")"
+
+ case "${hardware}" in
+ # hardware with padded uImage + padded rootfs
+ 'Linksys WRT350N v2')
+ [ "${magic}" != '2705' ] && {
+ echo "Invalid image type ${magic}."
+ return 1
+ }
+ return 0
+ ;;
+ # Netgear WNR854T has extra header before uImage
+ 'Netgear WNR854T')
+ [ "${magic}" != '8519' ] && {
+ echo "Invalid image type ${magic}."
+ return 1
+ }
+ return 0
+ ;;
+ esac
+
+ echo "Sysupgrade is not yet supported on ${hardware}."
+ return 1
+}
+#
+# Copyright (C) 2008-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
BOARDNAME:=Generic
+FEATURES:=squashfs jffs2
+
+DEFAULT_PACKAGES += kmod-ath9k wpad-mini
define Target/Description
- Build firmware images for orion based boards that boot from internal flash
+ Build firmware images for Marvell Orion based boards that boot from internal flash.
+ (e.g.: Linksys WRT350N v2, Netgear WNR854T, ...)
endef
-
+#
+# Copyright (C) 2008-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
BOARDNAME:=Internal Hard-Disk
+FEATURES:=targz
+
+DEFAULT_PACKAGES += kmod-ath9k wpad-mini
define Target/Description
- Build firmware images for orion based boards that boot directly from internal disk storage
- (e.g : Freecom DataTank 2, ...)
+ Build firmware images for Marvell Orion based boards that boot directly from internal disk storage.
+ (e.g.: Freecom DataTank 2, ...)
endef
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-define Image/Prepare
- cp $(LINUX_DIR)/arch/arm/boot/uImage $(KDIR)/uImage
-endef
-
-define Image/BuildKernel
- # Orion Kernel uImages
- # WRT350N v2: mach id 1633 (0x661)
- echo -en "\x06\x1c\xa0\xe3\x61\x10\x81\xe3" > $(KDIR)/wrt350nv2-zImage
- cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/wrt350nv2-zImage
- $(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
- -C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
- -d $(KDIR)/wrt350nv2-zImage $(KDIR)/wrt350nv2-uImage
- cp $(KDIR)/wrt350nv2-uImage $(BIN_DIR)/openwrt-wrt350nv2-uImage
- # WNR854T: mach id 1801 (0x709)
- echo -en "\x07\x1c\xa0\xe3\x09\x10\x81\xe3" > $(KDIR)/wnr854t-zImage
- cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/wnr854t-zImage
- $(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
- -C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
- -d $(KDIR)/wnr854t-zImage $(KDIR)/wnr854t-uImage
- cp $(KDIR)/wnr854t-uImage $(BIN_DIR)/openwrt-wnr854t-uImage
- # DT2: mach id 1514 (0x5EA)
- echo -en "\x05\x1c\xa0\xe3\xea\x10\x81\xe3" > $(KDIR)/dt2-zImage
- cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/dt2-zImage
- $(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
- -C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
- -d $(KDIR)/dt2-zImage $(KDIR)/dt2-uImage
- cp $(KDIR)/dt2-uImage $(BIN_DIR)/openwrt-dt2-uImage
-endef
-
-define Image/Build/Netgear
- # Orion Netgear Images
- mkdir $(KDIR)/netgear_image
- cp $(KDIR)/wnr854t-uImage $(KDIR)/netgear_image/uImage
- $(STAGING_DIR_HOST)/bin/mkfs.jffs2 -m none -p -l -q -e 128KiB -o $(KDIR)/wnr854t-uImage.jffs2 -d $(KDIR)/netgear_image
- rm -rf $(KDIR)/netgear_image
- ( \
- dd if=$(KDIR)/wnr854t-uImage.jffs2 bs=1024k conv=sync; \
- dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
- ) > $(BIN_DIR)/openwrt-$(2)-$(1).img
- $(STAGING_DIR_HOST)/bin/add_header $(3) $(BIN_DIR)/openwrt-$(2)-$(1).img $(BIN_DIR)/openwrt-$(2)-$(1)-webupgrade.img
-endef
-
-define Image/Build/Linksys
- # Orion Linksys Images
- # sysupgrade image
- ( \
- dd if="${KDIR}/$2-uImage" bs=$5 conv=sync; \
- dd if="${KDIR}/root.$1" bs=64k conv=sync; \
- ) > "${BIN_DIR}/openwrt-$2-$1.img"
- # recovery image and webupgrade image for stock firmware
- rm -rf "${TMP_DIR}/$2_webupgrade"
- mkdir "${TMP_DIR}/$2_webupgrade"
- # create parameter file
- echo ":kernel $5 ${BIN_DIR}/openwrt-$2-uImage" >"${TMP_DIR}/$2_webupgrade/$2.par"
- echo ":rootfs 0 ${KDIR}/root.$1" >>"${TMP_DIR}/$2_webupgrade/$2.par"
- [ ! -f "$(STAGING_DIR_HOST)/share/wrt350nv2-builder/u-boot.bin" ] || ( \
- echo ":u-boot 0 $(STAGING_DIR_HOST)/share/wrt350nv2-builder/u-boot.bin" >>"${TMP_DIR}/$2_webupgrade/$2.par"; )
- echo "#version 0x2020" >>"${TMP_DIR}/$2_webupgrade/$2.par"
- # create bin file for recovery and webupgrade image
- ( cd "${TMP_DIR}/$2_webupgrade"; \
- "${STAGING_DIR_HOST}/bin/$2-builder" \
- -v -b "${TMP_DIR}/$2_webupgrade/$2.par"; \
- )
- # copy bin file as recovery image
- $(CP) "${TMP_DIR}/$2_webupgrade/wrt350n.bin" "$(BIN_DIR)/openwrt-$2-$1-recovery.bin"
- # create webupgrade image for stock firmware update mechanism
- zip "${TMP_DIR}/$2_webupgrade/wrt350n.zip" "${TMP_DIR}/$2_webupgrade/wrt350n.bin"
- "${STAGING_DIR_HOST}/bin/$2-builder" -v -z "${TMP_DIR}/$2_webupgrade/wrt350n.zip" "${BIN_DIR}/openwrt-$2-$1-webupgrade.img"
- rm -rf "${TMP_DIR}/$2_webupgrade"
-endef
-
-define Image/Build/Freecom
- # Orion Freecom Images
- # backup unwanted files
- rm -rf ${TMP_DIR}/$2_backup
- mkdir ${TMP_DIR}/$2_backup
- -mv $(TARGET_DIR)/{var,jffs,rom} ${TMP_DIR}/$2_backup
- # add extra files
- $(INSTALL_DIR) $(TARGET_DIR)/boot
- # TODO: Add special CMDLINE shim for webupgrade image here
- $(CP) $(KDIR)/dt2-uImage $(TARGET_DIR)/boot/uImage
- $(INSTALL_DIR) $(TARGET_DIR)/var
- # create image
- $(TAR) cfj $(BIN_DIR)/openwrt-$(2)-$(1).img --numeric-owner --owner=0 --group=0 -C $(TARGET_DIR)/ .
- $(STAGING_DIR_HOST)/bin/encode_crc $(BIN_DIR)/openwrt-$(2)-$(1).img $(BIN_DIR)/openwrt-$(2)-$(1)-webupgrade.img $(3)
- # remove extra files
- rm -rf $(TARGET_DIR)/{boot,var}
- # recover unwanted files
- -mv ${TMP_DIR}/$2_backup/* $(TARGET_DIR)/
- rm -rf ${TMP_DIR}/$2_backup
-endef
-
-define Image/Build
-$(call Image/Build/$(1),$(1))
-$(call Image/Build/Netgear,$(1),wnr854t,NG_WNR854T,$(1))
-$(call Image/Build/Freecom,$(1),dt2,DT,$(1))
- # Leave WRT350Nv2 at last position due to webimage dependency for zip
- # 5th parameter is kernel mtd size, e.g. 0x00100000 = 1048576 or 0x001A0000 = 1703936
-$(call Image/Build/Linksys,$(1),wrt350nv2,WNR350Nv2,$(1),1048576)
-endef
-
-define Image/Build/squashfs
-$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
- ( \
- dd if=$(KDIR)/uImage bs=1024k conv=sync; \
- dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
- ) > $(BIN_DIR)/$(IMG_PREFIX)-$(1).img
-endef
+include $(SUBTARGET).mk
$(eval $(call BuildImage))
-
-# Dependency for WRT350N v2 webupgrade image
-$(eval $(call RequireCommand,zip, \
- Please install zip. \
-))
--- /dev/null
+#
+# Copyright (C) 2008-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Image/Prepare
+ cp $(LINUX_DIR)/arch/arm/boot/uImage $(KDIR)/uImage
+endef
+
+define Image/BuildKernel
+ # Orion Kernel uImages
+ # WRT350N v2: mach id 1633 (0x661)
+ echo -en "\x06\x1c\xa0\xe3\x61\x10\x81\xe3" > $(KDIR)/wrt350nv2-zImage
+ cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/wrt350nv2-zImage
+ $(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
+ -C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
+ -d $(KDIR)/wrt350nv2-zImage $(KDIR)/wrt350nv2-uImage
+ cp $(KDIR)/wrt350nv2-uImage $(BIN_DIR)/openwrt-wrt350nv2-uImage
+ # WNR854T: mach id 1801 (0x709)
+ echo -en "\x07\x1c\xa0\xe3\x09\x10\x81\xe3" > $(KDIR)/wnr854t-zImage
+ cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/wnr854t-zImage
+ $(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
+ -C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
+ -d $(KDIR)/wnr854t-zImage $(KDIR)/wnr854t-uImage
+ cp $(KDIR)/wnr854t-uImage $(BIN_DIR)/openwrt-wnr854t-uImage
+endef
+
+define Image/Build/Netgear
+ # Orion Netgear Images
+ mkdir $(KDIR)/netgear_image
+ cp $(KDIR)/wnr854t-uImage $(KDIR)/netgear_image/uImage
+ $(STAGING_DIR_HOST)/bin/mkfs.jffs2 -m none -p -l -q -e 128KiB -o $(KDIR)/wnr854t-uImage.jffs2 -d $(KDIR)/netgear_image
+ rm -rf $(KDIR)/netgear_image
+ ( \
+ dd if=$(KDIR)/wnr854t-uImage.jffs2 bs=1024k conv=sync; \
+ dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
+ ) > $(BIN_DIR)/openwrt-$(2)-$(1).img
+ $(STAGING_DIR_HOST)/bin/add_header $(3) $(BIN_DIR)/openwrt-$(2)-$(1).img $(BIN_DIR)/openwrt-$(2)-$(1)-webupgrade.img
+endef
+
+define Image/Build/Linksys
+ # Orion Linksys Images
+ # sysupgrade image
+ ( \
+ dd if="${KDIR}/$2-uImage" bs=$5 conv=sync; \
+ dd if="${KDIR}/root.$1" bs=64k conv=sync; \
+ ) > "${BIN_DIR}/openwrt-$2-$1.img"
+ # recovery image and webupgrade image for stock firmware
+ rm -rf "${TMP_DIR}/$2_webupgrade"
+ mkdir "${TMP_DIR}/$2_webupgrade"
+ # create parameter file
+ echo ":kernel $5 ${BIN_DIR}/openwrt-$2-uImage" >"${TMP_DIR}/$2_webupgrade/$2.par"
+ echo ":rootfs 0 ${KDIR}/root.$1" >>"${TMP_DIR}/$2_webupgrade/$2.par"
+ [ ! -f "$(STAGING_DIR_HOST)/share/wrt350nv2-builder/u-boot.bin" ] || ( \
+ echo ":u-boot 0 $(STAGING_DIR_HOST)/share/wrt350nv2-builder/u-boot.bin" >>"${TMP_DIR}/$2_webupgrade/$2.par"; )
+ echo "#version 0x2020" >>"${TMP_DIR}/$2_webupgrade/$2.par"
+ # create bin file for recovery and webupgrade image
+ ( cd "${TMP_DIR}/$2_webupgrade"; \
+ "${STAGING_DIR_HOST}/bin/$2-builder" \
+ -v -b "${TMP_DIR}/$2_webupgrade/$2.par"; \
+ )
+ # copy bin file as recovery image
+ $(CP) "${TMP_DIR}/$2_webupgrade/wrt350n.bin" "$(BIN_DIR)/openwrt-$2-$1-recovery.bin"
+ # create webupgrade image for stock firmware update mechanism
+ zip "${TMP_DIR}/$2_webupgrade/wrt350n.zip" "${TMP_DIR}/$2_webupgrade/wrt350n.bin"
+ "${STAGING_DIR_HOST}/bin/$2-builder" -v -z "${TMP_DIR}/$2_webupgrade/wrt350n.zip" "${BIN_DIR}/openwrt-$2-$1-webupgrade.img"
+ rm -rf "${TMP_DIR}/$2_webupgrade"
+endef
+
+define Image/Build
+$(call Image/Build/$(1),$(1))
+$(call Image/Build/Netgear,$(1),wnr854t,NG_WNR854T,$(1))
+ # Leave WRT350Nv2 at last position due to webimage dependency for zip
+ # 5th parameter is kernel mtd size, e.g. 0x00100000 = 1048576 or 0x001A0000 = 1703936
+$(call Image/Build/Linksys,$(1),wrt350nv2,WNR350Nv2,$(1),1048576)
+endef
+
+define Image/Build/squashfs
+$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+ ( \
+ dd if=$(KDIR)/uImage bs=1024k conv=sync; \
+ dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
+ ) > $(BIN_DIR)/$(IMG_PREFIX)-$(1).img
+endef
+
+# Dependency for WRT350N v2 webupgrade image
+$(eval $(call RequireCommand,zip, \
+ Please install zip. \
+))
--- /dev/null
+#
+# Copyright (C) 2008-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Image/Prepare
+ cp $(LINUX_DIR)/arch/arm/boot/uImage $(KDIR)/uImage
+endef
+
+define Image/BuildKernel
+ # Orion Kernel uImages
+ # DT2: mach id 1514 (0x5EA)
+ echo -en "\x05\x1c\xa0\xe3\xea\x10\x81\xe3" > $(KDIR)/dt2-zImage
+ cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/dt2-zImage
+ $(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
+ -C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
+ -d $(KDIR)/dt2-zImage $(KDIR)/dt2-uImage
+ cp $(KDIR)/dt2-uImage $(BIN_DIR)/openwrt-dt2-uImage
+endef
+
+define Image/Build/Freecom
+ # Orion Freecom Images
+ # backup unwanted files
+ rm -rf ${TMP_DIR}/$2_backup
+ mkdir ${TMP_DIR}/$2_backup
+ -mv $(TARGET_DIR)/{var,jffs,rom} ${TMP_DIR}/$2_backup
+ # add extra files
+ $(INSTALL_DIR) $(TARGET_DIR)/boot
+ # TODO: Add special CMDLINE shim for webupgrade image here
+ $(CP) $(KDIR)/dt2-uImage $(TARGET_DIR)/boot/uImage
+ $(INSTALL_DIR) $(TARGET_DIR)/var
+ # create image
+ $(TAR) cfj $(BIN_DIR)/openwrt-$(2)-$(1).img --numeric-owner --owner=0 --group=0 -C $(TARGET_DIR)/ .
+ $(STAGING_DIR_HOST)/bin/encode_crc $(BIN_DIR)/openwrt-$(2)-$(1).img $(BIN_DIR)/openwrt-$(2)-$(1)-webupgrade.img $(3)
+ # remove extra files
+ rm -rf $(TARGET_DIR)/{boot,var}
+ # recover unwanted files
+ -mv ${TMP_DIR}/$2_backup/* $(TARGET_DIR)/
+ rm -rf ${TMP_DIR}/$2_backup
+endef
+
+define Image/Build
+$(call Image/Build/$(1),$(1))
+$(call Image/Build/Freecom,$(1),dt2,DT,$(1))
+endef
+
+define Image/Build/squashfs
+$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+ ( \
+ dd if=$(KDIR)/uImage bs=1024k conv=sync; \
+ dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
+ ) > $(BIN_DIR)/$(IMG_PREFIX)-$(1).img
+endef
tools-y += m4 autoconf automake bison pkg-config sed mklibs
tools-y += sstrip ipkg-utils genext2fs libuuid mtd-utils mkimage
tools-y += firmware-utils patch-cmdline quilt yaffs2 flock
-tools-$(CONFIG_TARGET_orion) += wrt350nv2-builder upslug2
+tools-$(CONFIG_TARGET_orion_generic) += wrt350nv2-builder upslug2
tools-$(CONFIG_TARGET_x86) += qemu
ifneq ($(CONFIG_LINUX_2_6_25)$(CONFIG_TARGET_ar71xx),)
tools-y += squashfs lzma-old
$(curdir)/ := .config prereq
$(curdir)//install = $(1)/compile
-$(eval $(call stampfile,$(curdir),tools,install,,CONFIG_CCACHE CONFIG_powerpc CONFIG_GCC_VERSION_4_3 CONFIG_GCC_USE_GRAPHITE CONFIG_TARGET_orion))
+$(eval $(call stampfile,$(curdir),tools,install,,CONFIG_CCACHE CONFIG_powerpc CONFIG_GCC_VERSION_4_3 CONFIG_GCC_USE_GRAPHITE CONFIG_TARGET_orion_generic))
$(eval $(call subdir,$(curdir)))
projects / openwrt / staging / chunkeey.git / commitdiff