return 0;
}
-/* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */
-#define ACK_CNT_RATIO (50)
-#define BA_TIMEOUT_CNT (5)
-#define BA_TIMEOUT_MAX (16)
-
-/**
- * iwl_good_ack_health - checks for ACK count ratios, BA timeout retries.
- *
- * When the ACK count ratio is low and aggregated BA timeout retries exceeding
- * the BA_TIMEOUT_MAX, reload firmware and bring system back to normal
- * operation state.
- */
-static bool iwlagn_good_ack_health(struct iwl_priv *priv,
- struct statistics_tx *cur)
-{
- int actual_delta, expected_delta, ba_timeout_delta;
- struct statistics_tx *old;
-
- if (priv->agg_tids_count)
- return true;
-
- lockdep_assert_held(&priv->statistics.lock);
-
- old = &priv->statistics.tx;
-
- actual_delta = le32_to_cpu(cur->actual_ack_cnt) -
- le32_to_cpu(old->actual_ack_cnt);
- expected_delta = le32_to_cpu(cur->expected_ack_cnt) -
- le32_to_cpu(old->expected_ack_cnt);
-
- /* Values should not be negative, but we do not trust the firmware */
- if (actual_delta <= 0 || expected_delta <= 0)
- return true;
-
- ba_timeout_delta = le32_to_cpu(cur->agg.ba_timeout) -
- le32_to_cpu(old->agg.ba_timeout);
-
- if ((actual_delta * 100 / expected_delta) < ACK_CNT_RATIO &&
- ba_timeout_delta > BA_TIMEOUT_CNT) {
- IWL_DEBUG_RADIO(priv,
- "deltas: actual %d expected %d ba_timeout %d\n",
- actual_delta, expected_delta, ba_timeout_delta);
-
-#ifdef CONFIG_IWLWIFI_DEBUGFS
- /*
- * This is ifdef'ed on DEBUGFS because otherwise the
- * statistics aren't available. If DEBUGFS is set but
- * DEBUG is not, these will just compile out.
- */
- IWL_DEBUG_RADIO(priv, "rx_detected_cnt delta %d\n",
- priv->delta_stats.tx.rx_detected_cnt);
- IWL_DEBUG_RADIO(priv,
- "ack_or_ba_timeout_collision delta %d\n",
- priv->delta_stats.tx.ack_or_ba_timeout_collision);
-#endif
-
- if (ba_timeout_delta >= BA_TIMEOUT_MAX)
- return false;
- }
-
- return true;
-}
-
/**
* iwl_good_plcp_health - checks for plcp error.
*
if (msecs < 99)
return;
- if (iwlagn_mod_params.ack_check && !iwlagn_good_ack_health(priv, tx)) {
- IWL_ERR(priv, "low ack count detected, restart firmware\n");
- if (!iwl_force_reset(priv, IWL_FW_RESET, false))
- return;
- }
-
if (iwlagn_mod_params.plcp_check &&
!iwlagn_good_plcp_health(priv, cur_ofdm, cur_ofdm_ht, msecs))
iwl_force_reset(priv, IWL_RF_RESET, false);
module_param_named(plcp_check, iwlagn_mod_params.plcp_check, bool, S_IRUGO);
MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])");
-module_param_named(ack_check, iwlagn_mod_params.ack_check, bool, S_IRUGO);
-MODULE_PARM_DESC(ack_check, "Check ack health (default: 0 [disabled])");
-
module_param_named(wd_disable, iwlagn_mod_params.wd_disable, int, S_IRUGO);
MODULE_PARM_DESC(wd_disable,
"Disable stuck queue watchdog timer 0=system default, "