ar71xx: allow to override at803x sgmii aneg status

When checking the outcome of the PHY autonegotiation status, at803x
currently returns false in case the SGMII side is not established.

Due to a hardware-bug, ag71xx needs to fixup the SoCs SGMII side, which
it can't as it is not aware of the link-establishment.

This commit allows to ignore the SGMII side autonegotiation status to
allow ag71xx to do the fixup work.

Signed-off-by: David Bauer <mail@david-bauer.net>

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c
index e48ddd65e7c37d6955824a158aa03316b6b52108..4e99834d2757dcbed5038145aa5c0f023f3ad6f8 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c
@@ -122,6 +122,7 @@ static struct gpio_keys_button fritz450E_gpio_keys[] __initdata = {
 static struct at803x_platform_data fritz450E_at803x_data = {
        .disable_smarteee = 1,
        .has_reset_gpio = 1,
+       .override_sgmii_aneg = 1,
        .reset_gpio = FRITZ450E_GPIO_PHY_RESET,
 };
 

diff --git a/target/linux/ar71xx/patches-4.9/903-at803x-add-sgmii-aneg-override-pdata.patch b/target/linux/ar71xx/patches-4.9/903-at803x-add-sgmii-aneg-override-pdata.patch
new file mode 100644 (file)
index 0000000..9c922d1
--- /dev/null
+++ b/target/linux/ar71xx/patches-4.9/903-at803x-add-sgmii-aneg-override-pdata.patch
@@ -0,0 +1,42 @@
+Index: linux-4.9.111/drivers/net/phy/at803x.c
+===================================================================
+--- linux-4.9.111.orig/drivers/net/phy/at803x.c
++++ linux-4.9.111/drivers/net/phy/at803x.c
+@@ -461,12 +461,15 @@ static void at803x_link_change_notify(st
+ 
+ static int at803x_aneg_done(struct phy_device *phydev)
+ {
++      struct at803x_platform_data *pdata;
+       int ccr;
+ 
+       int aneg_done = genphy_aneg_done(phydev);
+       if (aneg_done != BMSR_ANEGCOMPLETE)
+               return aneg_done;
+ 
++      pdata = dev_get_platdata(&phydev->mdio.dev);
++
+       /*
+        * in SGMII mode, if copper side autoneg is successful,
+        * also check SGMII side autoneg result
+@@ -481,7 +484,8 @@ static int at803x_aneg_done(struct phy_d
+       /* check if the SGMII link is OK. */
+       if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
+               pr_warn("803x_aneg_done: SGMII link is not ok\n");
+-              aneg_done = 0;
++              if (!pdata || !pdata->override_sgmii_aneg)
++                      aneg_done = 0;
+       }
+       /* switch back to copper page */
+       phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
+Index: linux-4.9.111/include/linux/platform_data/phy-at803x.h
+===================================================================
+--- linux-4.9.111.orig/include/linux/platform_data/phy-at803x.h
++++ linux-4.9.111/include/linux/platform_data/phy-at803x.h
+@@ -7,6 +7,7 @@ struct at803x_platform_data {
+       int enable_rgmii_rx_delay:1;
+       int fixup_rgmii_tx_delay:1;
+       int has_reset_gpio:1;
++      int override_sgmii_aneg:1;
+       int reset_gpio;
+ };
+