mlxsw_reg_mtpppc_egr_timestamp_message_type_set(payload, egr);
}
+/* MTPTPT - Monitoring Precision Time Protocol Trap Register
+ * ---------------------------------------------------------
+ * This register is used for configuring under which trap to deliver PTP
+ * packets depending on type of the packet.
+ */
+#define MLXSW_REG_MTPTPT_ID 0x9092
+#define MLXSW_REG_MTPTPT_LEN 0x08
+
+MLXSW_REG_DEFINE(mtptpt, MLXSW_REG_MTPTPT_ID, MLXSW_REG_MTPTPT_LEN);
+
+enum mlxsw_reg_mtptpt_trap_id {
+ MLXSW_REG_MTPTPT_TRAP_ID_PTP0,
+ MLXSW_REG_MTPTPT_TRAP_ID_PTP1,
+};
+
+/* reg_mtptpt_trap_id
+ * Trap id.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mtptpt, trap_id, 0x00, 0, 4);
+
+/* reg_mtptpt_message_type
+ * Bitwise vector of PTP message types to trap. This is a necessary but
+ * non-sufficient condition since need to enable also per port. See MTPPPC.
+ * Message types are defined by IEEE 1588 Each bit corresponds to a value (e.g.
+ * Bit0: Sync, Bit1: Delay_Req)
+ */
+MLXSW_ITEM32(reg, mtptpt, message_type, 0x04, 0, 16);
+
+static inline void mlxsw_reg_mtptptp_pack(char *payload,
+ enum mlxsw_reg_mtptpt_trap_id trap_id,
+ u16 message_type)
+{
+ MLXSW_REG_ZERO(mtptpt, payload);
+ mlxsw_reg_mtptpt_trap_id_set(payload, trap_id);
+ mlxsw_reg_mtptpt_message_type_set(payload, message_type);
+}
+
/* MGPIR - Management General Peripheral Information Register
* ----------------------------------------------------------
* MGPIR register allows software to query the hardware and
MLXSW_REG(mgpc),
MLXSW_REG(mprs),
MLXSW_REG(mtpppc),
+ MLXSW_REG(mtptpt),
MLXSW_REG(mgpir),
MLXSW_REG(tngcr),
MLXSW_REG(tnumt),