can: sja1000: Makefile/Kconfig: sort alphabetically

This patch sorts the drivers in the Makefile alphabetically and arranges
the Kconfig file accordingly.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index 6b72da2f18a6e6d27ba07cce6fe7815d909d8823..8bd6d7b88fcd0a315d475ec1d1be31dae41b2be9 100644 (file)
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -1,26 +1,18 @@
 # SPDX-License-Identifier: GPL-2.0-only
+
 menuconfig CAN_SJA1000
        tristate "Philips/NXP SJA1000 devices"
        depends on HAS_IOMEM
 
 if CAN_SJA1000
 
-config CAN_SJA1000_ISA
-       tristate "ISA Bus based legacy SJA1000 driver"
-       ---help---
-         This driver adds legacy support for SJA1000 chips connected to
-         the ISA bus using I/O port, memory mapped or indirect access.
-
-config CAN_SJA1000_PLATFORM
-       tristate "Generic Platform Bus based SJA1000 driver"
+config CAN_EMS_PCI
+       tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
+       depends on PCI
        ---help---
-         This driver adds support for the SJA1000 chips connected to
-         the "platform bus" (Linux abstraction for directly to the
-         processor attached devices).  Which can be found on various
-         boards from Phytec (http://www.phytec.de) like the PCM027,
-         PCM038. It also provides the OpenFirmware "platform bus" found
-         on embedded systems with OpenFirmware bindings, e.g. if you
-         have a PowerPC based system you may want to enable this option.
+         This driver is for the one, two or four channel CPC-PCI,
+         CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
+         (http://www.ems-wuensche.de).
 
 config CAN_EMS_PCMCIA
        tristate "EMS CPC-CARD Card"
@@ -29,23 +21,12 @@ config CAN_EMS_PCMCIA
          This driver is for the one or two channel CPC-CARD cards from
          EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
 
-config CAN_EMS_PCI
-       tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
+config CAN_KVASER_PCI
+       tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
        depends on PCI
        ---help---
-         This driver is for the one, two or four channel CPC-PCI,
-         CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
-         (http://www.ems-wuensche.de).
-
-config CAN_PEAK_PCMCIA
-       tristate "PEAK PCAN-PC Card"
-       depends on PCMCIA
-       depends on HAS_IOPORT_MAP
-       ---help---
-         This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
-         from PEAK-System (http://www.peak-system.com). To compile this
-         driver as a module, choose M here: the module will be called
-         peak_pcmcia.
+         This driver is for the PCIcanx and PCIcan cards (1, 2 or
+         4 channel) from Kvaser (http://www.kvaser.com).
 
 config CAN_PEAK_PCI
        tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
@@ -66,12 +47,15 @@ config CAN_PEAK_PCIEC
          Technik. This will also automatically select I2C and I2C_ALGO
          configuration options.
 
-config CAN_KVASER_PCI
-       tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
-       depends on PCI
+config CAN_PEAK_PCMCIA
+       tristate "PEAK PCAN-PC Card"
+       depends on PCMCIA
+       depends on HAS_IOPORT_MAP
        ---help---
-         This driver is for the PCIcanx and PCIcan cards (1, 2 or
-         4 channel) from Kvaser (http://www.kvaser.com).
+         This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
+         from PEAK-System (http://www.peak-system.com). To compile this
+         driver as a module, choose M here: the module will be called
+         peak_pcmcia.
 
 config CAN_PLX_PCI
        tristate "PLX90xx PCI-bridge based Cards"
@@ -91,6 +75,23 @@ config CAN_PLX_PCI
           - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com)
           - ASEM CAN raw - 2 isolated CAN channels (www.asem.it)
 
+config CAN_SJA1000_ISA
+       tristate "ISA Bus based legacy SJA1000 driver"
+       ---help---
+         This driver adds legacy support for SJA1000 chips connected to
+         the ISA bus using I/O port, memory mapped or indirect access.
+
+config CAN_SJA1000_PLATFORM
+       tristate "Generic Platform Bus based SJA1000 driver"
+       ---help---
+         This driver adds support for the SJA1000 chips connected to
+         the "platform bus" (Linux abstraction for directly to the
+         processor attached devices).  Which can be found on various
+         boards from Phytec (http://www.phytec.de) like the PCM027,
+         PCM038. It also provides the OpenFirmware "platform bus" found
+         on embedded systems with OpenFirmware bindings, e.g. if you
+         have a PowerPC based system you may want to enable this option.
+
 config CAN_TSCAN1
        tristate "TS-CAN1 PC104 boards"
        depends on ISA

diff --git a/drivers/net/can/sja1000/Makefile b/drivers/net/can/sja1000/Makefile
index 9253aaf9e739297d77e99625b518448682cb7327..62dad36b76afcad5df0d6647ad12bd5b8920f6c1 100644 (file)
--- a/drivers/net/can/sja1000/Makefile
+++ b/drivers/net/can/sja1000/Makefile
@@ -3,13 +3,13 @@
 #  Makefile for the SJA1000 CAN controller drivers.
 #
 
-obj-$(CONFIG_CAN_SJA1000) += sja1000.o
-obj-$(CONFIG_CAN_SJA1000_ISA) += sja1000_isa.o
-obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
-obj-$(CONFIG_CAN_EMS_PCMCIA) += ems_pcmcia.o
 obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
+obj-$(CONFIG_CAN_EMS_PCMCIA) += ems_pcmcia.o
 obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o
-obj-$(CONFIG_CAN_PEAK_PCMCIA) += peak_pcmcia.o
 obj-$(CONFIG_CAN_PEAK_PCI) += peak_pci.o
+obj-$(CONFIG_CAN_PEAK_PCMCIA) += peak_pcmcia.o
 obj-$(CONFIG_CAN_PLX_PCI) += plx_pci.o
+obj-$(CONFIG_CAN_SJA1000) += sja1000.o
+obj-$(CONFIG_CAN_SJA1000_ISA) += sja1000_isa.o
+obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
 obj-$(CONFIG_CAN_TSCAN1) += tscan1.o