#include <common.h>
#include <nand.h>
+#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/emif_defs.h>
#include <asm/arch/nand_defs.h>
+#include <asm/arch/gpio_defs.h>
+#include <netdev.h>
#include "../common/misc.h"
DECLARE_GLOBAL_DATA_PTR;
return 0;
}
+#ifdef CONFIG_DRIVER_TI_EMAC
+int board_eth_init(bd_t *bis)
+{
+ uint8_t eeprom_enetaddr[6];
+ int i;
+ struct davinci_gpio *gpio1_base =
+ (struct davinci_gpio *)DAVINCI_GPIO_BANK01;
+
+ /* Configure PINMUX 3 to enable EMAC pins */
+ writel((readl(PINMUX3) | 0x1affff), PINMUX3);
+
+ /* Configure GPIO20 as output */
+ writel((readl(&gpio1_base->dir) & ~(1 << 20)), &gpio1_base->dir);
+
+ /* Toggle GPIO 20 */
+ for (i = 0; i < 20; i++) {
+ /* GPIO 20 low */
+ writel((readl(&gpio1_base->out_data) & ~(1 << 20)),
+ &gpio1_base->out_data);
+
+ udelay(1000);
+
+ /* GPIO 20 high */
+ writel((readl(&gpio1_base->out_data) | (1 << 20)),
+ &gpio1_base->out_data);
+ }
+
+ /* Configure I2C pins so that EEPROM can be read */
+ writel((readl(PINMUX3) | 0x01400000), PINMUX3);
+
+ /* Read Ethernet MAC address from EEPROM */
+ if (dvevm_read_mac_address(eeprom_enetaddr))
+ dv_configure_mac_address(eeprom_enetaddr);
+
+ davinci_emac_initialize();
+
+ return 0;
+}
+#endif
+
#ifdef CONFIG_NAND_DAVINCI
static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip)
{