CATEGORY:=Network
TITLE:=Lantiq DSL userland tool
URL:=http://www.lantiq.com/
- DEPENDS:=@(TARGET_lantiq_xway||TARGET_lantiq_xway_legacy||TARGET_lantiq_ase) +libpthread
+ DEPENDS:=@(TARGET_lantiq_xway||TARGET_lantiq_xway_legacy||TARGET_lantiq_ase) +libpthread +ltq-dsl-base
MENU:=1
endef
CATEGORY:=Network
TITLE:=Lantiq VDSL userland tool
URL:=http://www.lantiq.com/
- DEPENDS:=@TARGET_lantiq_xrx200 +libpthread +librt
+ DEPENDS:=@TARGET_lantiq_xrx200 +libpthread +librt +ltq-dsl-base
endef
define Package/ltq-vdsl-app/description
--- /dev/null
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ltq-dsl-base
+PKG_RELEASE:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ltq-dsl-base
+ SECTION:=net
+ CATEGORY:=Network
+ TITLE:=DSL related files for Intel/Lantiq DSL Chipsets
+ URL:=http://openwrt.org/
+ DEPENDS:=@TARGET_lantiq +jshn
+endef
+
+define Package/ltq-dsl-base/description
+ This package contains DSL related files for Intel/Lantiq DSL Chipsets.
+endef
+
+define Build/Compile
+endef
+
+define Package/ltq-dsl-base/install
+ $(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,ltq-dsl-base))
--- /dev/null
+#!/bin/sh
+
+[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0
+
+. /lib/functions.sh
+. /lib/functions/leds.sh
+
+led_dsl_up() {
+ case "$(config_get led_dsl trigger)" in
+ "netdev")
+ led_set_attr $1 "trigger" "netdev"
+ led_set_attr $1 "device_name" "$(config_get led_dsl dev)"
+ for m in $(config_get led_dsl mode); do
+ led_set_attr $1 "$m" "1"
+ done
+ ;;
+ *)
+ led_on $1
+ ;;
+ esac
+}
+
+config_load system
+config_get led led_dsl sysfs
+if [ -n "$led" ]; then
+ case "$DSL_INTERFACE_STATUS" in
+ "HANDSHAKE") led_timer $led 500 500;;
+ "TRAINING") led_timer $led 200 200;;
+ "UP") led_dsl_up $led;;
+ *) led_off $led
+ esac
+fi
--- /dev/null
+#!/bin/sh
+
+[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0
+
+. /usr/share/libubox/jshn.sh
+. /lib/functions.sh
+
+include /lib/network
+scan_interfaces
+
+interfaces=$(ubus list network.interface.\* | cut -d"." -f3)
+for ifc in $interfaces; do
+
+ json_load "$(ifstatus $ifc)"
+
+ json_get_var proto proto
+ if [ "$proto" != "pppoa" ]; then
+ continue
+ fi
+
+ json_get_var up up
+ config_get_bool auto "$ifc" auto 1
+ if [ "$DSL_INTERFACE_STATUS" = "UP" ]; then
+ if [ "$up" != 1 ] && [ "$auto" = 1 ]; then
+ ( sleep 1; ifup "$ifc" ) &
+ fi
+ else
+ if [ "$up" = 1 ] && [ "$auto" = 1 ]; then
+ ( sleep 1; ifdown "$ifc" ) &
+ else
+ json_get_var autostart autostart
+ if [ "$up" != 1 ] && [ "$autostart" = 1 ]; then
+ ( sleep 1; ifdown "$ifc" ) &
+ fi
+ fi
+ fi
+done
--- /dev/null
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2012-2014 OpenWrt.org
+
+if [ "$( which vdsl_cpe_control )" ]; then
+ XDSL_CTRL=vdsl_cpe_control
+else
+ XDSL_CTRL=dsl_cpe_control
+fi
+
+#
+# Basic functions to send CLI commands to the vdsl_cpe_control daemon
+#
+dsl_cmd() {
+ killall -q -0 ${XDSL_CTRL} && (
+ lock /var/lock/dsl_pipe
+ echo "$@" > /tmp/pipe/dsl_cpe0_cmd
+ cat /tmp/pipe/dsl_cpe0_ack
+ lock -u /var/lock/dsl_pipe
+ )
+}
+dsl_val() {
+ echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*')
+}
+dsl_string() {
+ echo $(expr "$1" : '.*'$2'=(\([A-Z0-9,]*\))')
+}
+
+#
+# Simple divide by 10 routine to cope with one decimal place
+#
+dbt() {
+ local a=$(expr $1 / 10)
+ local b=$(expr $1 % 10)
+ echo "${a}.${b#-}"
+}
+#
+# Take a number and convert to k or meg
+#
+scale() {
+ local val=$1
+ local a
+ local b
+
+ if [ "$val" -gt 1000000 ]; then
+ a=$(expr $val / 1000)
+ b=$(expr $a % 1000)
+ a=$(expr $a / 1000)
+ printf "%d.%03d Mb" ${a} ${b}
+ elif [ "$val" -gt 1000 ]; then
+ a=$(expr $val / 1000)
+ printf "%d Kb" ${a}
+ else
+ echo "${val} b"
+ fi
+}
+
+scale_latency() {
+ local val=$1
+ local a
+ local b
+
+ a=$(expr $val / 100)
+ b=$(expr $val % 100)
+ printf "%d.%d ms" ${a} ${b}
+}
+
+scale_latency_us() {
+ local val=$1
+
+ expr $val \* 10
+}
+
+#
+# convert vendorid into human readable form
+#
+parse_vendorid() {
+ local val=$1
+ local name
+ local version
+
+ case "$val" in
+ B5,00,41,4C,43,42*)
+ name="Alcatel"
+ version=${val##*B5,00,41,4C,43,42,}
+ ;;
+ B5,00,41,4E,44,56*)
+ name="Analog Devices"
+ version=${val##*B5,00,41,4E,44,56,}
+ ;;
+ B5,00,42,44,43,4D*)
+ name="Broadcom"
+ version=${val##*B5,00,42,44,43,4D,}
+ ;;
+ B5,00,43,45,4E,54*)
+ name="Centillium"
+ version=${val##*B5,00,43,45,4E,54,}
+ ;;
+ B5,00,47,53,50,4E*)
+ name="Globespan"
+ version=${val##*B5,00,47,53,50,4E,}
+ ;;
+ B5,00,49,4B,4E,53*)
+ name="Ikanos"
+ version=${val##*B5,00,49,4B,4E,53,}
+ ;;
+ B5,00,49,46,54,4E*)
+ name="Infineon"
+ version=${val##*B5,00,49,46,54,4E,}
+ ;;
+ B5,00,54,53,54,43*)
+ name="Texas Instruments"
+ version=${val##*B5,00,54,53,54,43,}
+ ;;
+ B5,00,54,4D,4D,42*)
+ name="Thomson MultiMedia Broadband"
+ version=${val##*B5,00,54,4D,4D,42,}
+ ;;
+ B5,00,54,43,54,4E*)
+ name="Trend Chip Technologies"
+ version=${val##*B5,00,54,43,54,4E,}
+ ;;
+ B5,00,53,54,4D,49*)
+ name="ST Micro"
+ version=${val##*B5,00,53,54,4D,49,}
+ ;;
+ esac
+
+ [ -n "$name" ] && {
+ val="$name"
+
+ [ "$version" != "00,00" ] && val="$(printf "%s %d.%d" "$val" 0x${version//,/ 0x})"
+ }
+
+ echo "$val"
+}
+
+#
+# Read the data rates for both directions
+#
+data_rates() {
+ local csg
+ local dru
+ local drd
+ local sdru
+ local sdrd
+
+ csg=$(dsl_cmd g997csg 0 1)
+ drd=$(dsl_val "$csg" ActualDataRate)
+
+ csg=$(dsl_cmd g997csg 0 0)
+ dru=$(dsl_val "$csg" ActualDataRate)
+
+ [ -z "$drd" ] && drd=0
+ [ -z "$dru" ] && dru=0
+
+ sdrd=$(scale $drd)
+ sdru=$(scale $dru)
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.data_rate_down=$drd"
+ echo "dsl.data_rate_up=$dru"
+ echo "dsl.data_rate_down_s=\"$sdrd\""
+ echo "dsl.data_rate_up_s=\"$sdru\""
+ else
+ echo "Data Rate: Down: ${sdrd}/s / Up: ${sdru}/s"
+ fi
+}
+
+#
+# Chipset
+#
+chipset() {
+ local vig
+ local cs
+
+ vig=$(dsl_cmd vig)
+ cs=$(dsl_val "$vig" DSL_ChipSetType)
+ csfw=$(dsl_val "$vig" DSL_ChipSetFWVersion)
+ csapi=$(dsl_val "$vig" DSL_DriverVersionApi)
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.chipset=\"${cs}\""
+ echo "dsl.firmware_version=\"${csfw}\""
+ echo "dsl.api_version=\"${csapi}\""
+ else
+ echo "Chipset: ${cs}"
+ echo "Firmware Version: ${csfw}"
+ echo "API Version: ${csapi}"
+ fi
+}
+
+#
+# Vendor information
+#
+vendor() {
+ local lig
+ local vid
+ local svid
+
+ lig=$(dsl_cmd g997lig 1)
+ vid=$(dsl_string "$lig" G994VendorID)
+ svid=$(dsl_string "$lig" SystemVendorID)
+
+ vid=$(parse_vendorid $vid)
+ svid=$(parse_vendorid $svid)
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.atuc_vendor_id=\"${vid}\""
+ echo "dsl.atuc_system_vendor_id=\"${svid}\""
+ else
+ echo "ATU-C Vendor ID: ${vid}"
+ echo "ATU-C System Vendor ID: ${svid}"
+ fi
+}
+
+#
+# XTSE capabilities
+#
+xtse() {
+ local xtusesg
+ local xtse1
+ local xtse2
+ local xtse3
+ local xtse4
+ local xtse5
+ local xtse6
+ local xtse7
+ local xtse8
+
+ local xtse_s=""
+
+ local annex_s=""
+ local line_mode_s=""
+ local vector_s=""
+
+ local dsmsg=""
+ local cmd=""
+
+ xtusesg=$(dsl_cmd g997xtusesg)
+ xtse1=$(dsl_val "$xtusesg" XTSE1)
+ xtse2=$(dsl_val "$xtusesg" XTSE2)
+ xtse3=$(dsl_val "$xtusesg" XTSE3)
+ xtse4=$(dsl_val "$xtusesg" XTSE4)
+ xtse5=$(dsl_val "$xtusesg" XTSE5)
+ xtse6=$(dsl_val "$xtusesg" XTSE6)
+ xtse7=$(dsl_val "$xtusesg" XTSE7)
+ xtse8=$(dsl_val "$xtusesg" XTSE8)
+
+ # Evaluate Annex (according to G.997.1, 7.3.1.1.1)
+ if [ $((xtse1 & 13)) != 0 \
+ -o $((xtse2 & 1)) != 0 \
+ -o $((xtse3 & 12)) != 0 \
+ -o $((xtse4 & 3)) != 0 \
+ -o $((xtse6 & 3)) != 0 \
+ -o $((xtse8 & 1)) != 0 ]; then
+ annex_s=" A,"
+ fi
+
+ if [ $((xtse1 & 48)) != 0 \
+ -o $((xtse2 & 2)) != 0 \
+ -o $((xtse3 & 48)) != 0 \
+ -o $((xtse6 & 12)) != 0 \
+ -o $((xtse8 & 2)) != 0 ]; then
+ annex_s="$annex_s B,"
+ fi
+
+ if [ $((xtse1 & 194)) != 0 \
+ -o $((xtse2 & 12)) != 0 \
+ -o $((xtse8 & 4)) != 0 ]; then
+ annex_s="$annex_s C,"
+ fi
+
+ if [ $((xtse4 & 48)) != 0 \
+ -o $((xtse5 & 3)) != 0 \
+ -o $((xtse6 & 192)) != 0 ]; then
+ annex_s="$annex_s I,"
+ fi
+
+ if [ $((xtse4 & 192)) != 0 \
+ -o $((xtse7 & 3)) != 0 ]; then
+ annex_s="$annex_s J,"
+ fi
+
+ if [ $((xtse5 & 60)) != 0 ]; then
+ annex_s="$annex_s L,"
+ fi
+
+ if [ $((xtse5 & 192)) != 0 \
+ -o $((xtse7 & 12)) != 0 ]; then
+ annex_s="$annex_s M,"
+ fi
+
+ annex_s=${annex_s:1}
+ annex_s=${annex_s%?}
+
+ # Evaluate Line Mode (according to G.997.1, 7.3.1.1.1)
+
+ # Regional standard: ANSI T1.413
+ if [ $((xtse1 & 1)) != 0 ]; then
+ line_mode_s=" T1.413,"
+ fi
+
+ # Regional standard: TS 101 388
+ if [ $((xtse1 & 1)) != 0 ]; then
+ line_mode_s="$line_mode_s TS 101 388,"
+ fi
+
+ if [ $((xtse1 & 252)) != 0 ]; then
+ line_mode_s="$line_mode_s G.992.1 (ADSL),"
+ fi
+
+ if [ $((xtse2 & 15)) != 0 ]; then
+ line_mode_s="$line_mode_s G.992.2 (ADSL lite),"
+ fi
+
+ if [ $((xtse3 & 60)) != 0 \
+ -o $((xtse4 & 240)) != 0 \
+ -o $((xtse5 & 252)) != 0 ]; then
+ line_mode_s="$line_mode_s G.992.3 (ADSL2),"
+ fi
+
+ if [ $((xtse4 & 3)) != 0 \
+ -o $((xtse5 & 3)) != 0 ]; then
+ line_mode_s="$line_mode_s G.992.4 (ADSL2 lite),"
+ fi
+
+ if [ $((xtse6 & 199)) != 0 \
+ -o $((xtse7 & 15)) != 0 ]; then
+ line_mode_s="$line_mode_s G.992.5 (ADSL2+),"
+ fi
+
+ if [ $((xtse8 & 7)) != 0 ]; then
+ dsmsg=$(dsl_cmd dsmsg)
+ vector_s=$(dsl_val "$dsmsg" eVectorStatus)
+
+ case "$vector_s" in
+ "0") line_mode_s="$line_mode_s G.993.2 (VDSL2)," ;;
+ "1") line_mode_s="$line_mode_s G.993.5 (VDSL2 with downstream vectoring)," ;;
+ "2") line_mode_s="$line_mode_s G.993.5 (VDSL2 with down- and upstream vectoring)," ;;
+ *) line_mode_s="$line_mode_s unknown," ;;
+ esac
+ fi
+
+ #!!! PROPRIETARY & INTERMEDIATE USE !!!
+ if [ $((xtse8 & 128)) != 0 ]; then
+ line_mode_s="$line_mode_s G.993.1 (VDSL),"
+ fi
+
+ line_mode_s=${line_mode_s:1}
+ line_mode_s=${line_mode_s%?}
+
+ xtse_s="${xtse1}, ${xtse2}, ${xtse3}, ${xtse4}, ${xtse5}, ${xtse6}, ${xtse7}, ${xtse8}"
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.xtse1=${xtse1:-nil}"
+ echo "dsl.xtse2=${xtse2:-nil}"
+ echo "dsl.xtse3=${xtse3:-nil}"
+ echo "dsl.xtse4=${xtse4:-nil}"
+ echo "dsl.xtse5=${xtse5:-nil}"
+ echo "dsl.xtse6=${xtse6:-nil}"
+ echo "dsl.xtse7=${xtse7:-nil}"
+ echo "dsl.xtse8=${xtse8:-nil}"
+ echo "dsl.xtse_s=\"$xtse_s\""
+ echo "dsl.annex_s=\"${annex_s}\""
+ echo "dsl.line_mode_s=\"${line_mode_s}\""
+ else
+ echo "XTSE Capabilities: ${xtse_s}"
+ echo "Annex: ${annex_s}"
+ echo "Line Mode: ${line_mode_s}"
+ fi
+}
+
+#
+# Power Management Mode
+#
+power_mode() {
+ local pmsg=$(dsl_cmd g997pmsg)
+ local pm=$(dsl_val "$pmsg" nPowerManagementStatus);
+ local s;
+
+ case "$pm" in
+ "-1") s="Power management state is not available" ;;
+ "0") s="L0 - Synchronized" ;;
+ "1") s="L1 - Power Down Data transmission (G.992.2)" ;;
+ "2") s="L2 - Power Down Data transmission (G.992.3 and G.992.4)" ;;
+ "3") s="L3 - No power" ;;
+ *) s="unknown" ;;
+ esac
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.power_mode_num=${pm:-nil}"
+ echo "dsl.power_mode_s=\"$s\""
+ else
+ echo "Power Management Mode: $s"
+ fi
+}
+
+#
+# Latency type (interleave delay)
+#
+latency_delay() {
+ local csg
+
+ local idu
+ local idu_s;
+ local sidu
+
+ local idd
+ local idd_s;
+ local sidd
+
+ csg=$(dsl_cmd g997csg 0 1)
+ idd=$(dsl_val "$csg" ActualInterleaveDelay)
+
+ csg=$(dsl_cmd g997csg 0 0)
+ idu=$(dsl_val "$csg" ActualInterleaveDelay)
+
+ [ -z "$idd" ] && idd=0
+ [ -z "$idu" ] && idu=0
+
+ if [ "$idd" -gt 100 ]; then
+ idd_s="Interleave"
+ else
+ idd_s="Fast"
+ fi
+
+ if [ "$idu" -gt 100 ]; then
+ idu_s="Interleave"
+ else
+ idu_s="Fast"
+ fi
+
+ sidu=$(scale_latency $idu)
+ sidd=$(scale_latency $idd)
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.latency_down=\"$(scale_latency_us $idd)\""
+ echo "dsl.latency_up=\"$(scale_latency_us $idu)\""
+ echo "dsl.latency_num_down=\"$sidd\""
+ echo "dsl.latency_num_up=\"$sidu\""
+ echo "dsl.latency_s_down=\"$idd_s\""
+ echo "dsl.latency_s_up=\"$idu_s\""
+ else
+ echo "Latency [Interleave Delay]: ${sidd} [${idd_s}] ${sidu} [${idu_s}]"
+ fi
+}
+
+#
+# Errors
+#
+errors() {
+ local lsctg
+ local dpctg
+ local fecsf
+ local fecsn
+ local esf
+ local esn
+ local sesf
+ local sesn
+ local lossf
+ local lossn
+ local uasf
+ local uasn
+
+ local crc_pf
+ local crc_pn
+ local crcp_pf
+ local crcp_pn
+ local hecf
+ local hecn
+
+ lsctg=$(dsl_cmd pmlsctg 1)
+ fecsf=$(dsl_val "$lsctg" nFECS)
+ esf=$(dsl_val "$lsctg" nES)
+ sesf=$(dsl_val "$lsctg" nSES)
+ lossf=$(dsl_val "$lsctg" nLOSS)
+ uasf=$(dsl_val "$lsctg" nUAS)
+
+ lsctg=$(dsl_cmd pmlsctg 0)
+ fecsn=$(dsl_val "$lsctg" nFECS)
+ esn=$(dsl_val "$lsctg" nES)
+ sesn=$(dsl_val "$lsctg" nSES)
+ lossn=$(dsl_val "$lsctg" nLOSS)
+ uasn=$(dsl_val "$lsctg" nUAS)
+
+ dpctg=$(dsl_cmd pmdpctg 0 1)
+ hecf=$(dsl_val "$dpctg" nHEC)
+ crc_pf=$(dsl_val "$dpctg" nCRC_P)
+ crcp_pf=$(dsl_val "$dpctg" nCRCP_P)
+
+ dpctg=$(dsl_cmd pmdpctg 0 0)
+ hecn=$(dsl_val "$dpctg" nHEC)
+ crc_pn=$(dsl_val "$dpctg" nCRC_P)
+ crcp_pn=$(dsl_val "$dpctg" nCRCP_P)
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.errors_fecs_near=${fecsn:-nil}"
+ echo "dsl.errors_fecs_far=${fecsf:-nil}"
+ echo "dsl.errors_es_near=${esn:-nil}"
+ echo "dsl.errors_es_far=${esf:-nil}"
+ echo "dsl.errors_ses_near=${sesn:-nil}"
+ echo "dsl.errors_ses_far=${sesf:-nil}"
+ echo "dsl.errors_loss_near=${lossn:-nil}"
+ echo "dsl.errors_loss_far=${lossf:-nil}"
+ echo "dsl.errors_uas_near=${uasn:-nil}"
+ echo "dsl.errors_uas_far=${uasf:-nil}"
+ echo "dsl.errors_hec_near=${hecn:-nil}"
+ echo "dsl.errors_hec_far=${hecf:-nil}"
+ echo "dsl.errors_crc_p_near=${crc_pn:-nil}"
+ echo "dsl.errors_crc_p_far=${crc_pf:-nil}"
+ echo "dsl.errors_crcp_p_near=${crcp_pn:-nil}"
+ echo "dsl.errors_crcp_p_far=${crcp_pf:-nil}"
+ else
+ echo "Forward Error Correction Seconds (FECS): Near: ${fecsn} / Far: ${fecsf}"
+ echo "Errored seconds (ES): Near: ${esn} / Far: ${esf}"
+ echo "Severely Errored Seconds (SES): Near: ${sesn} / Far: ${sesf}"
+ echo "Loss of Signal Seconds (LOSS): Near: ${lossn} / Far: ${lossf}"
+ echo "Unavailable Seconds (UAS): Near: ${uasn} / Far: ${uasf}"
+ echo "Header Error Code Errors (HEC): Near: ${hecn} / Far: ${hecf}"
+ echo "Non Pre-emtive CRC errors (CRC_P): Near: ${crc_pn} / Far: ${crc_pf}"
+ echo "Pre-emtive CRC errors (CRCP_P): Near: ${crcp_pn} / Far: ${crcp_pf}"
+ fi
+}
+
+#
+# Work out how long the line has been up
+#
+line_uptime() {
+ local ccsg
+ local et
+ local etr
+ local d
+ local h
+ local m
+ local s
+ local rc=""
+
+ ccsg=$(dsl_cmd pmccsg 0 0 0)
+ et=$(dsl_val "$ccsg" nElapsedTime)
+
+ [ -z "$et" ] && et=0
+
+ d=$(expr $et / 86400)
+ etr=$(expr $et % 86400)
+ h=$(expr $etr / 3600)
+ etr=$(expr $etr % 3600)
+ m=$(expr $etr / 60)
+ s=$(expr $etr % 60)
+
+
+ [ "${d}${h}${m}${s}" -ne 0 ] && rc="${s}s"
+ [ "${d}${h}${m}" -ne 0 ] && rc="${m}m ${rc}"
+ [ "${d}${h}" -ne 0 ] && rc="${h}h ${rc}"
+ [ "${d}" -ne 0 ] && rc="${d}d ${rc}"
+
+ [ -z "$rc" ] && rc="down"
+
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.line_uptime=${et}"
+ echo "dsl.line_uptime_s=\"${rc}\""
+ else
+
+ echo "Line Uptime Seconds: ${et}"
+ echo "Line Uptime: ${rc}"
+ fi
+}
+
+#
+# Get noise and attenuation figures
+#
+line_data() {
+ local lsg
+ local latnu
+ local latnd
+ local satnu
+ local satnd
+ local snru
+ local snrd
+ local attndru
+ local attndrd
+ local sattndru
+ local sattndrd
+ local actatpu
+ local actatpd
+
+ lsg=$(dsl_cmd g997lsg 1 1)
+ latnd=$(dsl_val "$lsg" LATN)
+ satnd=$(dsl_val "$lsg" SATN)
+ snrd=$(dsl_val "$lsg" SNR)
+ attndrd=$(dsl_val "$lsg" ATTNDR)
+ actatpd=$(dsl_val "$lsg" ACTATP)
+
+ lsg=$(dsl_cmd g997lsg 0 1)
+ latnu=$(dsl_val "$lsg" LATN)
+ satnu=$(dsl_val "$lsg" SATN)
+ snru=$(dsl_val "$lsg" SNR)
+ attndru=$(dsl_val "$lsg" ATTNDR)
+ actatpu=$(dsl_val "$lsg" ACTATP)
+
+ [ -z "$latnd" ] && latnd=0
+ [ -z "$latnu" ] && latnu=0
+ [ -z "$satnd" ] && satnd=0
+ [ -z "$satnu" ] && satnu=0
+ [ -z "$snrd" ] && snrd=0
+ [ -z "$snru" ] && snru=0
+ [ -z "$actatpd" ] && actatpd=0
+ [ -z "$actatpu" ] && actatpu=0
+
+ latnd=$(dbt $latnd)
+ latnu=$(dbt $latnu)
+ satnd=$(dbt $satnd)
+ satnu=$(dbt $satnu)
+ snrd=$(dbt $snrd)
+ snru=$(dbt $snru)
+ actatpd=$(dbt $actatpd)
+ actatpu=$(dbt $actatpu)
+
+ [ -z "$attndrd" ] && attndrd=0
+ [ -z "$attndru" ] && attndru=0
+
+ sattndrd=$(scale $attndrd)
+ sattndru=$(scale $attndru)
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.line_attenuation_down=\"$latnd\""
+ echo "dsl.line_attenuation_up=\"$latnu\""
+ echo "dsl.noise_margin_down=\"$snrd\""
+ echo "dsl.noise_margin_up=\"$snru\""
+ echo "dsl.signal_attenuation_down=\"$satnd\""
+ echo "dsl.signal_attenuation_up=\"$satnu\""
+ echo "dsl.actatp_down=\"$actatpd\""
+ echo "dsl.actatp_up=\"$actatpu\""
+ echo "dsl.max_data_rate_down=$attndrd"
+ echo "dsl.max_data_rate_up=$attndru"
+ echo "dsl.max_data_rate_down_s=\"$sattndrd\""
+ echo "dsl.max_data_rate_up_s=\"$sattndru\""
+ else
+ echo "Line Attenuation (LATN): Down: ${latnd} dB / Up: ${latnu} dB"
+ echo "Signal Attenuation (SATN): Down: ${satnd} dB / Up: ${satnu} dB"
+ echo "Noise Margin (SNR): Down: ${snrd} dB / Up: ${snru} dB"
+ echo "Aggregate Transmit Power (ACTATP): Down: ${actatpd} dB / Up: ${actatpu} dB"
+ echo "Max. Attainable Data Rate (ATTNDR): Down: ${sattndrd}/s / Up: ${sattndru}/s"
+ fi
+}
+
+#
+# Is the line up? Or what state is it in?
+#
+line_state() {
+ local lsg=$(dsl_cmd lsg)
+ local ls=$(dsl_val "$lsg" nLineState);
+ local s;
+
+ case "$ls" in
+ "0x0") s="not initialized" ;;
+ "0x1") s="exception" ;;
+ "0x10") s="not updated" ;;
+ "0xff") s="idle request" ;;
+ "0x100") s="idle" ;;
+ "0x1ff") s="silent request" ;;
+ "0x200") s="silent" ;;
+ "0x300") s="handshake" ;;
+ "0x380") s="full_init" ;;
+ "0x400") s="discovery" ;;
+ "0x500") s="training" ;;
+ "0x600") s="analysis" ;;
+ "0x700") s="exchange" ;;
+ "0x800") s="showtime_no_sync" ;;
+ "0x801") s="showtime_tc_sync" ;;
+ "0x900") s="fastretrain" ;;
+ "0xa00") s="lowpower_l2" ;;
+ "0xb00") s="loopdiagnostic active" ;;
+ "0xb10") s="loopdiagnostic data exchange" ;;
+ "0xb20") s="loopdiagnostic data request" ;;
+ "0xc00") s="loopdiagnostic complete" ;;
+ "0x1000000") s="test" ;;
+ "0xd00") s="resync" ;;
+ "0x3c0") s="short init entry" ;;
+ "") s="not running daemon"; ls="0xfff" ;;
+ *) s="unknown" ;;
+ esac
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.line_state_num=$ls"
+ echo "dsl.line_state_detail=\"$s\""
+ if [ "$ls" = "0x801" ]; then
+ echo "dsl.line_state=\"UP\""
+ else
+ echo "dsl.line_state=\"DOWN\""
+ fi
+ else
+ if [ "$ls" = "0x801" ]; then
+ echo "Line State: UP [$ls: $s]"
+ else
+ echo "Line State: DOWN [$ls: $s]"
+ fi
+ fi
+}
+
+#
+# Which profile is used?
+#
+profile() {
+ local bpstg=$(dsl_cmd bpstg)
+ local profile=$(dsl_val "$bpstg" nProfile);
+ local s;
+
+ case "$profile" in
+ "0") s="8a" ;;
+ "1") s="8b" ;;
+ "2") s="8c" ;;
+ "3") s="8d" ;;
+ "4") s="12a" ;;
+ "5") s="12b" ;;
+ "6") s="17a" ;;
+ "7") s="30a" ;;
+ "8") s="17b" ;;
+ "") s="";;
+ *) s="unknown" ;;
+ esac
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.profile=${profile:-nil}"
+ echo "dsl.profile_s=\"${s}\""
+ else
+ echo "Profile: $s"
+ fi
+}
+
+dslstat() {
+ vendor
+ chipset
+ xtse
+ profile
+ line_state
+ errors
+ power_mode
+ latency_delay
+ data_rates
+ line_data
+ line_uptime
+}
+
+lucistat() {
+ echo "local dsl={}"
+ dslstat
+ echo "return dsl"
+}
--- /dev/null
+#!/bin/sh
+#
+# This script is called by dsl_cpe_control whenever there is a DSL event
+# and calls any available hotplug script(s) in /etc/hotplug.d/dsl.
+
+exec /sbin/hotplug-call dsl
+++ /dev/null
-#!/bin/sh
-
-[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0
-
-. /lib/functions.sh
-. /lib/functions/leds.sh
-
-led_dsl_up() {
- case "$(config_get led_dsl trigger)" in
- "netdev")
- led_set_attr $1 "trigger" "netdev"
- led_set_attr $1 "device_name" "$(config_get led_dsl dev)"
- for m in $(config_get led_dsl mode); do
- led_set_attr $1 "$m" "1"
- done
- ;;
- *)
- led_on $1
- ;;
- esac
-}
-
-config_load system
-config_get led led_dsl sysfs
-if [ -n "$led" ]; then
- case "$DSL_INTERFACE_STATUS" in
- "HANDSHAKE") led_timer $led 500 500;;
- "TRAINING") led_timer $led 200 200;;
- "UP") led_dsl_up $led;;
- *) led_off $led
- esac
-fi
+++ /dev/null
-#!/bin/sh
-
-[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-include /lib/network
-scan_interfaces
-
-interfaces=$(ubus list network.interface.\* | cut -d"." -f3)
-for ifc in $interfaces; do
-
- json_load "$(ifstatus $ifc)"
-
- json_get_var proto proto
- if [ "$proto" != "pppoa" ]; then
- continue
- fi
-
- json_get_var up up
- config_get_bool auto "$ifc" auto 1
- if [ "$DSL_INTERFACE_STATUS" = "UP" ]; then
- if [ "$up" != 1 ] && [ "$auto" = 1 ]; then
- ( sleep 1; ifup "$ifc" ) &
- fi
- else
- if [ "$up" = 1 ] && [ "$auto" = 1 ]; then
- ( sleep 1; ifdown "$ifc" ) &
- else
- json_get_var autostart autostart
- if [ "$up" != 1 ] && [ "$autostart" = 1 ]; then
- ( sleep 1; ifdown "$ifc" ) &
- fi
- fi
- fi
-done
+++ /dev/null
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2012-2014 OpenWrt.org
-
-if [ "$( which vdsl_cpe_control )" ]; then
- XDSL_CTRL=vdsl_cpe_control
-else
- XDSL_CTRL=dsl_cpe_control
-fi
-
-#
-# Basic functions to send CLI commands to the vdsl_cpe_control daemon
-#
-dsl_cmd() {
- killall -q -0 ${XDSL_CTRL} && (
- lock /var/lock/dsl_pipe
- echo "$@" > /tmp/pipe/dsl_cpe0_cmd
- cat /tmp/pipe/dsl_cpe0_ack
- lock -u /var/lock/dsl_pipe
- )
-}
-dsl_val() {
- echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*')
-}
-dsl_string() {
- echo $(expr "$1" : '.*'$2'=(\([A-Z0-9,]*\))')
-}
-
-#
-# Simple divide by 10 routine to cope with one decimal place
-#
-dbt() {
- local a=$(expr $1 / 10)
- local b=$(expr $1 % 10)
- echo "${a}.${b#-}"
-}
-#
-# Take a number and convert to k or meg
-#
-scale() {
- local val=$1
- local a
- local b
-
- if [ "$val" -gt 1000000 ]; then
- a=$(expr $val / 1000)
- b=$(expr $a % 1000)
- a=$(expr $a / 1000)
- printf "%d.%03d Mb" ${a} ${b}
- elif [ "$val" -gt 1000 ]; then
- a=$(expr $val / 1000)
- printf "%d Kb" ${a}
- else
- echo "${val} b"
- fi
-}
-
-scale_latency() {
- local val=$1
- local a
- local b
-
- a=$(expr $val / 100)
- b=$(expr $val % 100)
- printf "%d.%d ms" ${a} ${b}
-}
-
-scale_latency_us() {
- local val=$1
-
- expr $val \* 10
-}
-
-#
-# convert vendorid into human readable form
-#
-parse_vendorid() {
- local val=$1
- local name
- local version
-
- case "$val" in
- B5,00,41,4C,43,42*)
- name="Alcatel"
- version=${val##*B5,00,41,4C,43,42,}
- ;;
- B5,00,41,4E,44,56*)
- name="Analog Devices"
- version=${val##*B5,00,41,4E,44,56,}
- ;;
- B5,00,42,44,43,4D*)
- name="Broadcom"
- version=${val##*B5,00,42,44,43,4D,}
- ;;
- B5,00,43,45,4E,54*)
- name="Centillium"
- version=${val##*B5,00,43,45,4E,54,}
- ;;
- B5,00,47,53,50,4E*)
- name="Globespan"
- version=${val##*B5,00,47,53,50,4E,}
- ;;
- B5,00,49,4B,4E,53*)
- name="Ikanos"
- version=${val##*B5,00,49,4B,4E,53,}
- ;;
- B5,00,49,46,54,4E*)
- name="Infineon"
- version=${val##*B5,00,49,46,54,4E,}
- ;;
- B5,00,54,53,54,43*)
- name="Texas Instruments"
- version=${val##*B5,00,54,53,54,43,}
- ;;
- B5,00,54,4D,4D,42*)
- name="Thomson MultiMedia Broadband"
- version=${val##*B5,00,54,4D,4D,42,}
- ;;
- B5,00,54,43,54,4E*)
- name="Trend Chip Technologies"
- version=${val##*B5,00,54,43,54,4E,}
- ;;
- B5,00,53,54,4D,49*)
- name="ST Micro"
- version=${val##*B5,00,53,54,4D,49,}
- ;;
- esac
-
- [ -n "$name" ] && {
- val="$name"
-
- [ "$version" != "00,00" ] && val="$(printf "%s %d.%d" "$val" 0x${version//,/ 0x})"
- }
-
- echo "$val"
-}
-
-#
-# Read the data rates for both directions
-#
-data_rates() {
- local csg
- local dru
- local drd
- local sdru
- local sdrd
-
- csg=$(dsl_cmd g997csg 0 1)
- drd=$(dsl_val "$csg" ActualDataRate)
-
- csg=$(dsl_cmd g997csg 0 0)
- dru=$(dsl_val "$csg" ActualDataRate)
-
- [ -z "$drd" ] && drd=0
- [ -z "$dru" ] && dru=0
-
- sdrd=$(scale $drd)
- sdru=$(scale $dru)
-
- if [ "$action" = "lucistat" ]; then
- echo "dsl.data_rate_down=$drd"
- echo "dsl.data_rate_up=$dru"
- echo "dsl.data_rate_down_s=\"$sdrd\""
- echo "dsl.data_rate_up_s=\"$sdru\""
- else
- echo "Data Rate: Down: ${sdrd}/s / Up: ${sdru}/s"
- fi
-}
-
-#
-# Chipset
-#
-chipset() {
- local vig
- local cs
-
- vig=$(dsl_cmd vig)
- cs=$(dsl_val "$vig" DSL_ChipSetType)
- csfw=$(dsl_val "$vig" DSL_ChipSetFWVersion)
- csapi=$(dsl_val "$vig" DSL_DriverVersionApi)
-
- if [ "$action" = "lucistat" ]; then
- echo "dsl.chipset=\"${cs}\""
- echo "dsl.firmware_version=\"${csfw}\""
- echo "dsl.api_version=\"${csapi}\""
- else
- echo "Chipset: ${cs}"
- echo "Firmware Version: ${csfw}"
- echo "API Version: ${csapi}"
- fi
-}
-
-#
-# Vendor information
-#
-vendor() {
- local lig
- local vid
- local svid
-
- lig=$(dsl_cmd g997lig 1)
- vid=$(dsl_string "$lig" G994VendorID)
- svid=$(dsl_string "$lig" SystemVendorID)
-
- vid=$(parse_vendorid $vid)
- svid=$(parse_vendorid $svid)
-
- if [ "$action" = "lucistat" ]; then
- echo "dsl.atuc_vendor_id=\"${vid}\""
- echo "dsl.atuc_system_vendor_id=\"${svid}\""
- else
- echo "ATU-C Vendor ID: ${vid}"
- echo "ATU-C System Vendor ID: ${svid}"
- fi
-}
-
-#
-# XTSE capabilities
-#
-xtse() {
- local xtusesg
- local xtse1
- local xtse2
- local xtse3
- local xtse4
- local xtse5
- local xtse6
- local xtse7
- local xtse8
-
- local xtse_s=""
-
- local annex_s=""
- local line_mode_s=""
- local vector_s=""
-
- local dsmsg=""
- local cmd=""
-
- xtusesg=$(dsl_cmd g997xtusesg)
- xtse1=$(dsl_val "$xtusesg" XTSE1)
- xtse2=$(dsl_val "$xtusesg" XTSE2)
- xtse3=$(dsl_val "$xtusesg" XTSE3)
- xtse4=$(dsl_val "$xtusesg" XTSE4)
- xtse5=$(dsl_val "$xtusesg" XTSE5)
- xtse6=$(dsl_val "$xtusesg" XTSE6)
- xtse7=$(dsl_val "$xtusesg" XTSE7)
- xtse8=$(dsl_val "$xtusesg" XTSE8)
-
- # Evaluate Annex (according to G.997.1, 7.3.1.1.1)
- if [ $((xtse1 & 13)) != 0 \
- -o $((xtse2 & 1)) != 0 \
- -o $((xtse3 & 12)) != 0 \
- -o $((xtse4 & 3)) != 0 \
- -o $((xtse6 & 3)) != 0 \
- -o $((xtse8 & 1)) != 0 ]; then
- annex_s=" A,"
- fi
-
- if [ $((xtse1 & 48)) != 0 \
- -o $((xtse2 & 2)) != 0 \
- -o $((xtse3 & 48)) != 0 \
- -o $((xtse6 & 12)) != 0 \
- -o $((xtse8 & 2)) != 0 ]; then
- annex_s="$annex_s B,"
- fi
-
- if [ $((xtse1 & 194)) != 0 \
- -o $((xtse2 & 12)) != 0 \
- -o $((xtse8 & 4)) != 0 ]; then
- annex_s="$annex_s C,"
- fi
-
- if [ $((xtse4 & 48)) != 0 \
- -o $((xtse5 & 3)) != 0 \
- -o $((xtse6 & 192)) != 0 ]; then
- annex_s="$annex_s I,"
- fi
-
- if [ $((xtse4 & 192)) != 0 \
- -o $((xtse7 & 3)) != 0 ]; then
- annex_s="$annex_s J,"
- fi
-
- if [ $((xtse5 & 60)) != 0 ]; then
- annex_s="$annex_s L,"
- fi
-
- if [ $((xtse5 & 192)) != 0 \
- -o $((xtse7 & 12)) != 0 ]; then
- annex_s="$annex_s M,"
- fi
-
- annex_s=${annex_s:1}
- annex_s=${annex_s%?}
-
- # Evaluate Line Mode (according to G.997.1, 7.3.1.1.1)
-
- # Regional standard: ANSI T1.413
- if [ $((xtse1 & 1)) != 0 ]; then
- line_mode_s=" T1.413,"
- fi
-
- # Regional standard: TS 101 388
- if [ $((xtse1 & 1)) != 0 ]; then
- line_mode_s="$line_mode_s TS 101 388,"
- fi
-
- if [ $((xtse1 & 252)) != 0 ]; then
- line_mode_s="$line_mode_s G.992.1 (ADSL),"
- fi
-
- if [ $((xtse2 & 15)) != 0 ]; then
- line_mode_s="$line_mode_s G.992.2 (ADSL lite),"
- fi
-
- if [ $((xtse3 & 60)) != 0 \
- -o $((xtse4 & 240)) != 0 \
- -o $((xtse5 & 252)) != 0 ]; then
- line_mode_s="$line_mode_s G.992.3 (ADSL2),"
- fi
-
- if [ $((xtse4 & 3)) != 0 \
- -o $((xtse5 & 3)) != 0 ]; then
- line_mode_s="$line_mode_s G.992.4 (ADSL2 lite),"
- fi
-
- if [ $((xtse6 & 199)) != 0 \
- -o $((xtse7 & 15)) != 0 ]; then
- line_mode_s="$line_mode_s G.992.5 (ADSL2+),"
- fi
-
- if [ $((xtse8 & 7)) != 0 ]; then
- dsmsg=$(dsl_cmd dsmsg)
- vector_s=$(dsl_val "$dsmsg" eVectorStatus)
-
- case "$vector_s" in
- "0") line_mode_s="$line_mode_s G.993.2 (VDSL2)," ;;
- "1") line_mode_s="$line_mode_s G.993.5 (VDSL2 with downstream vectoring)," ;;
- "2") line_mode_s="$line_mode_s G.993.5 (VDSL2 with down- and upstream vectoring)," ;;
- *) line_mode_s="$line_mode_s unknown," ;;
- esac
- fi
-
- #!!! PROPRIETARY & INTERMEDIATE USE !!!
- if [ $((xtse8 & 128)) != 0 ]; then
- line_mode_s="$line_mode_s G.993.1 (VDSL),"
- fi
-
- line_mode_s=${line_mode_s:1}
- line_mode_s=${line_mode_s%?}
-
- xtse_s="${xtse1}, ${xtse2}, ${xtse3}, ${xtse4}, ${xtse5}, ${xtse6}, ${xtse7}, ${xtse8}"
-
- if [ "$action" = "lucistat" ]; then
- echo "dsl.xtse1=${xtse1:-nil}"
- echo "dsl.xtse2=${xtse2:-nil}"
- echo "dsl.xtse3=${xtse3:-nil}"
- echo "dsl.xtse4=${xtse4:-nil}"
- echo "dsl.xtse5=${xtse5:-nil}"
- echo "dsl.xtse6=${xtse6:-nil}"
- echo "dsl.xtse7=${xtse7:-nil}"
- echo "dsl.xtse8=${xtse8:-nil}"
- echo "dsl.xtse_s=\"$xtse_s\""
- echo "dsl.annex_s=\"${annex_s}\""
- echo "dsl.line_mode_s=\"${line_mode_s}\""
- else
- echo "XTSE Capabilities: ${xtse_s}"
- echo "Annex: ${annex_s}"
- echo "Line Mode: ${line_mode_s}"
- fi
-}
-
-#
-# Power Management Mode
-#
-power_mode() {
- local pmsg=$(dsl_cmd g997pmsg)
- local pm=$(dsl_val "$pmsg" nPowerManagementStatus);
- local s;
-
- case "$pm" in
- "-1") s="Power management state is not available" ;;
- "0") s="L0 - Synchronized" ;;
- "1") s="L1 - Power Down Data transmission (G.992.2)" ;;
- "2") s="L2 - Power Down Data transmission (G.992.3 and G.992.4)" ;;
- "3") s="L3 - No power" ;;
- *) s="unknown" ;;
- esac
-
- if [ "$action" = "lucistat" ]; then
- echo "dsl.power_mode_num=${pm:-nil}"
- echo "dsl.power_mode_s=\"$s\""
- else
- echo "Power Management Mode: $s"
- fi
-}
-
-#
-# Latency type (interleave delay)
-#
-latency_delay() {
- local csg
-
- local idu
- local idu_s;
- local sidu
-
- local idd
- local idd_s;
- local sidd
-
- csg=$(dsl_cmd g997csg 0 1)
- idd=$(dsl_val "$csg" ActualInterleaveDelay)
-
- csg=$(dsl_cmd g997csg 0 0)
- idu=$(dsl_val "$csg" ActualInterleaveDelay)
-
- [ -z "$idd" ] && idd=0
- [ -z "$idu" ] && idu=0
-
- if [ "$idd" -gt 100 ]; then
- idd_s="Interleave"
- else
- idd_s="Fast"
- fi
-
- if [ "$idu" -gt 100 ]; then
- idu_s="Interleave"
- else
- idu_s="Fast"
- fi
-
- sidu=$(scale_latency $idu)
- sidd=$(scale_latency $idd)
-
- if [ "$action" = "lucistat" ]; then
- echo "dsl.latency_down=\"$(scale_latency_us $idd)\""
- echo "dsl.latency_up=\"$(scale_latency_us $idu)\""
- echo "dsl.latency_num_down=\"$sidd\""
- echo "dsl.latency_num_up=\"$sidu\""
- echo "dsl.latency_s_down=\"$idd_s\""
- echo "dsl.latency_s_up=\"$idu_s\""
- else
- echo "Latency [Interleave Delay]: ${sidd} [${idd_s}] ${sidu} [${idu_s}]"
- fi
-}
-
-#
-# Errors
-#
-errors() {
- local lsctg
- local dpctg
- local fecsf
- local fecsn
- local esf
- local esn
- local sesf
- local sesn
- local lossf
- local lossn
- local uasf
- local uasn
-
- local crc_pf
- local crc_pn
- local crcp_pf
- local crcp_pn
- local hecf
- local hecn
-
- lsctg=$(dsl_cmd pmlsctg 1)
- fecsf=$(dsl_val "$lsctg" nFECS)
- esf=$(dsl_val "$lsctg" nES)
- sesf=$(dsl_val "$lsctg" nSES)
- lossf=$(dsl_val "$lsctg" nLOSS)
- uasf=$(dsl_val "$lsctg" nUAS)
-
- lsctg=$(dsl_cmd pmlsctg 0)
- fecsn=$(dsl_val "$lsctg" nFECS)
- esn=$(dsl_val "$lsctg" nES)
- sesn=$(dsl_val "$lsctg" nSES)
- lossn=$(dsl_val "$lsctg" nLOSS)
- uasn=$(dsl_val "$lsctg" nUAS)
-
- dpctg=$(dsl_cmd pmdpctg 0 1)
- hecf=$(dsl_val "$dpctg" nHEC)
- crc_pf=$(dsl_val "$dpctg" nCRC_P)
- crcp_pf=$(dsl_val "$dpctg" nCRCP_P)
-
- dpctg=$(dsl_cmd pmdpctg 0 0)
- hecn=$(dsl_val "$dpctg" nHEC)
- crc_pn=$(dsl_val "$dpctg" nCRC_P)
- crcp_pn=$(dsl_val "$dpctg" nCRCP_P)
-
- if [ "$action" = "lucistat" ]; then
- echo "dsl.errors_fecs_near=${fecsn:-nil}"
- echo "dsl.errors_fecs_far=${fecsf:-nil}"
- echo "dsl.errors_es_near=${esn:-nil}"
- echo "dsl.errors_es_far=${esf:-nil}"
- echo "dsl.errors_ses_near=${sesn:-nil}"
- echo "dsl.errors_ses_far=${sesf:-nil}"
- echo "dsl.errors_loss_near=${lossn:-nil}"
- echo "dsl.errors_loss_far=${lossf:-nil}"
- echo "dsl.errors_uas_near=${uasn:-nil}"
- echo "dsl.errors_uas_far=${uasf:-nil}"
- echo "dsl.errors_hec_near=${hecn:-nil}"
- echo "dsl.errors_hec_far=${hecf:-nil}"
- echo "dsl.errors_crc_p_near=${crc_pn:-nil}"
- echo "dsl.errors_crc_p_far=${crc_pf:-nil}"
- echo "dsl.errors_crcp_p_near=${crcp_pn:-nil}"
- echo "dsl.errors_crcp_p_far=${crcp_pf:-nil}"
- else
- echo "Forward Error Correction Seconds (FECS): Near: ${fecsn} / Far: ${fecsf}"
- echo "Errored seconds (ES): Near: ${esn} / Far: ${esf}"
- echo "Severely Errored Seconds (SES): Near: ${sesn} / Far: ${sesf}"
- echo "Loss of Signal Seconds (LOSS): Near: ${lossn} / Far: ${lossf}"
- echo "Unavailable Seconds (UAS): Near: ${uasn} / Far: ${uasf}"
- echo "Header Error Code Errors (HEC): Near: ${hecn} / Far: ${hecf}"
- echo "Non Pre-emtive CRC errors (CRC_P): Near: ${crc_pn} / Far: ${crc_pf}"
- echo "Pre-emtive CRC errors (CRCP_P): Near: ${crcp_pn} / Far: ${crcp_pf}"
- fi
-}
-
-#
-# Work out how long the line has been up
-#
-line_uptime() {
- local ccsg
- local et
- local etr
- local d
- local h
- local m
- local s
- local rc=""
-
- ccsg=$(dsl_cmd pmccsg 0 0 0)
- et=$(dsl_val "$ccsg" nElapsedTime)
-
- [ -z "$et" ] && et=0
-
- d=$(expr $et / 86400)
- etr=$(expr $et % 86400)
- h=$(expr $etr / 3600)
- etr=$(expr $etr % 3600)
- m=$(expr $etr / 60)
- s=$(expr $etr % 60)
-
-
- [ "${d}${h}${m}${s}" -ne 0 ] && rc="${s}s"
- [ "${d}${h}${m}" -ne 0 ] && rc="${m}m ${rc}"
- [ "${d}${h}" -ne 0 ] && rc="${h}h ${rc}"
- [ "${d}" -ne 0 ] && rc="${d}d ${rc}"
-
- [ -z "$rc" ] && rc="down"
-
-
- if [ "$action" = "lucistat" ]; then
- echo "dsl.line_uptime=${et}"
- echo "dsl.line_uptime_s=\"${rc}\""
- else
-
- echo "Line Uptime Seconds: ${et}"
- echo "Line Uptime: ${rc}"
- fi
-}
-
-#
-# Get noise and attenuation figures
-#
-line_data() {
- local lsg
- local latnu
- local latnd
- local satnu
- local satnd
- local snru
- local snrd
- local attndru
- local attndrd
- local sattndru
- local sattndrd
- local actatpu
- local actatpd
-
- lsg=$(dsl_cmd g997lsg 1 1)
- latnd=$(dsl_val "$lsg" LATN)
- satnd=$(dsl_val "$lsg" SATN)
- snrd=$(dsl_val "$lsg" SNR)
- attndrd=$(dsl_val "$lsg" ATTNDR)
- actatpd=$(dsl_val "$lsg" ACTATP)
-
- lsg=$(dsl_cmd g997lsg 0 1)
- latnu=$(dsl_val "$lsg" LATN)
- satnu=$(dsl_val "$lsg" SATN)
- snru=$(dsl_val "$lsg" SNR)
- attndru=$(dsl_val "$lsg" ATTNDR)
- actatpu=$(dsl_val "$lsg" ACTATP)
-
- [ -z "$latnd" ] && latnd=0
- [ -z "$latnu" ] && latnu=0
- [ -z "$satnd" ] && satnd=0
- [ -z "$satnu" ] && satnu=0
- [ -z "$snrd" ] && snrd=0
- [ -z "$snru" ] && snru=0
- [ -z "$actatpd" ] && actatpd=0
- [ -z "$actatpu" ] && actatpu=0
-
- latnd=$(dbt $latnd)
- latnu=$(dbt $latnu)
- satnd=$(dbt $satnd)
- satnu=$(dbt $satnu)
- snrd=$(dbt $snrd)
- snru=$(dbt $snru)
- actatpd=$(dbt $actatpd)
- actatpu=$(dbt $actatpu)
-
- [ -z "$attndrd" ] && attndrd=0
- [ -z "$attndru" ] && attndru=0
-
- sattndrd=$(scale $attndrd)
- sattndru=$(scale $attndru)
-
- if [ "$action" = "lucistat" ]; then
- echo "dsl.line_attenuation_down=\"$latnd\""
- echo "dsl.line_attenuation_up=\"$latnu\""
- echo "dsl.noise_margin_down=\"$snrd\""
- echo "dsl.noise_margin_up=\"$snru\""
- echo "dsl.signal_attenuation_down=\"$satnd\""
- echo "dsl.signal_attenuation_up=\"$satnu\""
- echo "dsl.actatp_down=\"$actatpd\""
- echo "dsl.actatp_up=\"$actatpu\""
- echo "dsl.max_data_rate_down=$attndrd"
- echo "dsl.max_data_rate_up=$attndru"
- echo "dsl.max_data_rate_down_s=\"$sattndrd\""
- echo "dsl.max_data_rate_up_s=\"$sattndru\""
- else
- echo "Line Attenuation (LATN): Down: ${latnd} dB / Up: ${latnu} dB"
- echo "Signal Attenuation (SATN): Down: ${satnd} dB / Up: ${satnu} dB"
- echo "Noise Margin (SNR): Down: ${snrd} dB / Up: ${snru} dB"
- echo "Aggregate Transmit Power (ACTATP): Down: ${actatpd} dB / Up: ${actatpu} dB"
- echo "Max. Attainable Data Rate (ATTNDR): Down: ${sattndrd}/s / Up: ${sattndru}/s"
- fi
-}
-
-#
-# Is the line up? Or what state is it in?
-#
-line_state() {
- local lsg=$(dsl_cmd lsg)
- local ls=$(dsl_val "$lsg" nLineState);
- local s;
-
- case "$ls" in
- "0x0") s="not initialized" ;;
- "0x1") s="exception" ;;
- "0x10") s="not updated" ;;
- "0xff") s="idle request" ;;
- "0x100") s="idle" ;;
- "0x1ff") s="silent request" ;;
- "0x200") s="silent" ;;
- "0x300") s="handshake" ;;
- "0x380") s="full_init" ;;
- "0x400") s="discovery" ;;
- "0x500") s="training" ;;
- "0x600") s="analysis" ;;
- "0x700") s="exchange" ;;
- "0x800") s="showtime_no_sync" ;;
- "0x801") s="showtime_tc_sync" ;;
- "0x900") s="fastretrain" ;;
- "0xa00") s="lowpower_l2" ;;
- "0xb00") s="loopdiagnostic active" ;;
- "0xb10") s="loopdiagnostic data exchange" ;;
- "0xb20") s="loopdiagnostic data request" ;;
- "0xc00") s="loopdiagnostic complete" ;;
- "0x1000000") s="test" ;;
- "0xd00") s="resync" ;;
- "0x3c0") s="short init entry" ;;
- "") s="not running daemon"; ls="0xfff" ;;
- *) s="unknown" ;;
- esac
-
- if [ "$action" = "lucistat" ]; then
- echo "dsl.line_state_num=$ls"
- echo "dsl.line_state_detail=\"$s\""
- if [ "$ls" = "0x801" ]; then
- echo "dsl.line_state=\"UP\""
- else
- echo "dsl.line_state=\"DOWN\""
- fi
- else
- if [ "$ls" = "0x801" ]; then
- echo "Line State: UP [$ls: $s]"
- else
- echo "Line State: DOWN [$ls: $s]"
- fi
- fi
-}
-
-#
-# Which profile is used?
-#
-profile() {
- local bpstg=$(dsl_cmd bpstg)
- local profile=$(dsl_val "$bpstg" nProfile);
- local s;
-
- case "$profile" in
- "0") s="8a" ;;
- "1") s="8b" ;;
- "2") s="8c" ;;
- "3") s="8d" ;;
- "4") s="12a" ;;
- "5") s="12b" ;;
- "6") s="17a" ;;
- "7") s="30a" ;;
- "8") s="17b" ;;
- "") s="";;
- *) s="unknown" ;;
- esac
-
- if [ "$action" = "lucistat" ]; then
- echo "dsl.profile=${profile:-nil}"
- echo "dsl.profile_s=\"${s}\""
- else
- echo "Profile: $s"
- fi
-}
-
-dslstat() {
- vendor
- chipset
- xtse
- profile
- line_state
- errors
- power_mode
- latency_delay
- data_rates
- line_data
- line_uptime
-}
-
-lucistat() {
- echo "local dsl={}"
- dslstat
- echo "return dsl"
-}
+++ /dev/null
-#!/bin/sh
-#
-# This script is called by dsl_cpe_control whenever there is a DSL event
-# and calls any available hotplug script(s) in /etc/hotplug.d/dsl.
-
-exec /sbin/hotplug-call dsl
projects / openwrt / staging / hauke.git / commitdiff