Changes since U-Boot 0.2.2:
======================================================================
+* Add PCI support for MPC8250 Boards (PM825 module)
+
* Patch by Stefan Roese, 25 Mar 2003:
- PCI405 update.
#include <common.h>
#include <ioports.h>
#include <mpc8260.h>
+#include <pci.h>
/*
* I/O Port configuration table
doc_probe (CFG_DOC_BASE);
}
#endif
+
+struct pci_controller hose;
+
+extern void pci_mpc8250_init(struct pci_controller *);
+
+void pci_init_board(void)
+{
+ pci_mpc8250_init(&hose);
+}
#ifndef CONFIG_ARM /* PowerPC and other */
+#ifdef CONFIG_PPC
static void print_str(const char *, const char *);
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 0;
}
+#else /* MIPS */
+
+int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ int i;
+ bd_t *bd = gd->bd;
+
+ print_num ("boot_params", (ulong)bd->bi_boot_params);
+ print_num ("memstart", (ulong)bd->bi_memstart);
+ print_num ("memsize", (ulong)bd->bi_memsize);
+ print_num ("flashstart", (ulong)bd->bi_flashstart);
+ print_num ("flashsize", (ulong)bd->bi_flashsize);
+ print_num ("flashoffset", (ulong)bd->bi_flashoffset);
+
+ printf ("ethaddr =");
+ for (i=0; i<6; ++i) {
+ printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]);
+ }
+ printf ("\nip_addr = ");
+ print_IPaddr (bd->bi_ip_addr);
+ printf ("\nbaudrate = %d bps\n", bd->bi_baudrate);
+
+ return 0;
+}
+#endif /* MIPS */
+
#else /* ARM */
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
printf ("%-12s= 0x%08lX\n", name, value);
}
-#ifndef CONFIG_ARM
+#ifdef CONFIG_PPC
static void print_str(const char *name, const char *str)
{
printf ("%-12s= %6s MHz\n", name, str);
}
-#endif /* CONFIG_ARM */
+#endif /* CONFIG_PPC */
#endif /* CFG_CMD_BDI */
START = start.o kgdb.o
OBJS = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \
interrupts.o ether_scc.o ether_fcc.o i2c.o commproc.o \
- bedbug_603e.o status_led.o
+ bedbug_603e.o status_led.o pci.o
all: .depend $(START) $(LIB)
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_PCI
+
+#include <pci.h>
+#include <asm/m8260_pci.h>
+
+/*
+ * Local->PCI map (from CPU) controlled by
+ * MPC826x master window
+ *
+ * 0x80000000 - 0xBFFFFFFF Total CPU2PCI space PCIBR0
+ *
+ * 0x80000000 - 0x8FFFFFFF PCI Mem with prefetch (Outbound ATU #1)
+ * 0x90000000 - 0x9FFFFFFF PCI Mem w/o prefetch (Outbound ATU #2)
+ * 0xA0000000 - 0xAFFFFFFF 32-bit PCI IO (Outbound ATU #3)
+ *
+ * PCI->Local map (from PCI)
+ * MPC826x slave window controlled by
+ *
+ * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1)
+ */
+
+/*
+ * Slave window that allows PCI masters to access MPC826x local memory.
+ * This window is set up using the first set of Inbound ATU registers
+ */
+
+#define PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */
+#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
+#define PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \
+ PICMR_PREFETCH_EN)
+
+/*
+ * This is the window that allows the CPU to access PCI address space.
+ * It will be setup with the SIU PCIBR0 register. All three PCI master
+ * windows, which allow the CPU to access PCI prefetch, non prefetch,
+ * and IO space (see below), must all fit within this window.
+ */
+
+#define PCI_MSTR_LOCAL 0x80000000 /* Local base */
+#define PCIMSK0_MASK PCIMSK_1GB /* Size of window */
+
+/*
+ * Master window that allows the CPU to access PCI Memory (prefetch).
+ * This window will be setup with the first set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
+#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
+#define CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
+#define PCI_MSTR_MEM_SIZE 0x10000000 /* 256MB */
+#define POCMR0_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
+
+/*
+ * Master window that allows the CPU to access PCI Memory (non-prefetch).
+ * This window will be setup with the second set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */
+#define PCI_MSTR_MEMIO_BUS 0x90000000 /* PCI base */
+#define CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
+#define PCI_MSTR_MEMIO_SIZE 0x10000000 /* 256MB */
+#define POCMR1_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE)
+
+/*
+ * Master window that allows the CPU to access PCI IO space.
+ * This window will be setup with the third set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */
+#define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */
+#define CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
+#define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */
+#define POCMR2_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PCI_IO)
+
+/* PCI bus configuration registers.
+ */
+
+#define PCI_CLASS_BRIDGE_CTLR 0x06
+
+
+static inline void pci_outl(u32 addr, u32 data)
+{
+ *(volatile u32 *) addr = cpu_to_le32(data);
+}
+
+void pci_mpc8250_init(struct pci_controller *hose)
+{
+ u16 tempShort;
+ u32 immr_addr = CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ pci_dev_t host_devno = PCI_BDF(0, 0, 0);
+
+ pci_setup_indirect(hose, CFG_IMMR + PCI_CFG_ADDR_REG,
+ CFG_IMMR + PCI_CFG_DATA_REG);
+
+ /*
+ * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
+ * and local bus for PCI (SIUMCR [LBPC]).
+ */
+ immap->im_siu_conf.sc_siumcr = 0x00640000;
+
+ /* Make PCI lowest priority */
+ /* Each 4 bits is a device bus request and the MS 4bits
+ is highest priority */
+ /* Bus 4bit value
+ --- ----------
+ CPM high 0b0000
+ CPM middle 0b0001
+ CPM low 0b0010
+ PCI reguest 0b0011
+ Reserved 0b0100
+ Reserved 0b0101
+ Internal Core 0b0110
+ External Master 1 0b0111
+ External Master 2 0b1000
+ External Master 3 0b1001
+ The rest are reserved */
+ immap->im_siu_conf.sc_ppc_alrh = 0x61207893;
+
+ /* Park bus on core while modifying PCI Bus accesses */
+ immap->im_siu_conf.sc_ppc_acr = 0x6;
+
+ /*
+ * Set up master window that allows the CPU to access PCI space. This
+ * window is set up using the first SIU PCIBR registers.
+ */
+ *(volatile unsigned long*)(immr_addr + M8265_PCIMSK0) = PCIMSK0_MASK;
+ *(volatile unsigned long*)(immr_addr + M8265_PCIBR0) =
+ PCI_MSTR_LOCAL | PCIBR_ENABLE;
+
+ /* Release PCI RST (by default the PCI RST signal is held low) */
+ pci_outl (immr_addr | PCI_GCR_REG, PCIGCR_PCI_BUS_EN);
+
+ /* give it some time */
+ udelay(1000);
+
+ /*
+ * Set up master window that allows the CPU to access PCI Memory (prefetch)
+ * space. This window is set up using the first set of Outbound ATU registers.
+ */
+ pci_outl (immr_addr | POTAR_REG0, PCI_MSTR_MEM_BUS >> 12); /* PCI base */
+ pci_outl (immr_addr | POBAR_REG0, PCI_MSTR_MEM_LOCAL >> 12); /* Local base */
+ pci_outl (immr_addr | POCMR_REG0, POCMR0_MASK_ATTRIB); /* Size & attribute */
+
+ /*
+ * Set up master window that allows the CPU to access PCI Memory (non-prefetch)
+ * space. This window is set up using the second set of Outbound ATU registers.
+ */
+ pci_outl (immr_addr | POTAR_REG1, PCI_MSTR_MEMIO_BUS >> 12); /* PCI base */
+ pci_outl (immr_addr | POBAR_REG1, PCI_MSTR_MEMIO_LOCAL >> 12); /* Local base */
+ pci_outl (immr_addr | POCMR_REG1, POCMR1_MASK_ATTRIB); /* Size & attribute */
+
+ /*
+ * Set up master window that allows the CPU to access PCI IO space. This window
+ * is set up using the third set of Outbound ATU registers.
+ */
+ pci_outl (immr_addr | POTAR_REG2, PCI_MSTR_IO_BUS >> 12); /* PCI base */
+ pci_outl (immr_addr | POBAR_REG2, PCI_MSTR_IO_LOCAL >> 12); /* Local base */
+ pci_outl (immr_addr | POCMR_REG2, POCMR2_MASK_ATTRIB); /* Size & attribute */
+
+ /*
+ * Set up slave window that allows PCI masters to access MPC826x local memory.
+ * This window is set up using the first set of Inbound ATU registers
+ */
+ pci_outl (immr_addr | PITAR_REG0, PCI_SLV_MEM_LOCAL >> 12); /* Local base */
+ pci_outl (immr_addr | PIBAR_REG0, PCI_SLV_MEM_BUS >> 12); /* PCI base */
+ pci_outl (immr_addr | PICMR_REG0, PICMR0_MASK_ATTRIB); /* Size & attribute */
+
+ /* See above for description - puts PCI request as highest priority */
+ immap->im_siu_conf.sc_ppc_alrh = 0x03124567;
+
+ /* Park the bus on the PCI */
+ immap->im_siu_conf.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
+
+ /* Host mode - specify the bridge as a host-PCI bridge */
+
+ pci_hose_write_config_byte(hose, host_devno, PCI_CLASS_CODE,
+ PCI_CLASS_BRIDGE_CTLR);
+
+ /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
+ pci_hose_read_config_word(hose, host_devno, PCI_COMMAND, &tempShort);
+ pci_hose_write_config_word(hose, host_devno, PCI_COMMAND,
+ tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ /* System memory space */
+ pci_set_region(hose->regions + 0,
+ CFG_SDRAM_BASE,
+ CFG_SDRAM_BASE,
+ 0x4000000,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 1,
+ PCI_MSTR_MEM_BUS,
+ PCI_MSTR_MEM_LOCAL,
+ PCI_MSTR_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* PCI I/O space */
+ pci_set_region(hose->regions + 2,
+ PCI_MSTR_IO_BUS,
+ PCI_MSTR_IO_LOCAL,
+ PCI_MSTR_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ pci_register_hose(hose);
+
+ hose->last_busno = pci_hose_scan(hose);
+}
+
+#endif /* CONFIG_PCI */
#define cfg_read(val, addr, type, op) *val = op((type)(addr))
#define cfg_write(val, addr, type, op) op((type *)(addr), (val))
+#ifdef CONFIG_PM826
#define INDIRECT_PCI_OP(rw, size, type, op, mask) \
static int \
indirect_##rw##_config_##size(struct pci_controller *hose, \
pci_dev_t dev, int offset, type val) \
{ \
out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \
+ sync(); \
cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
return 0; \
}
+#else
+#define INDIRECT_PCI_OP(rw, size, type, op, mask) \
+static int \
+indirect_##rw##_config_##size(struct pci_controller *hose, \
+ pci_dev_t dev, int offset, type val) \
+{ \
+ out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \
+ cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
+ return 0; \
+}
+#endif
#define INDIRECT_PCI_OP_ERRATA6(rw, size, type, op, mask) \
static int \
#define _U_BOOT_H_ 1
typedef struct bd_info {
- int bi_baudrate; /* serial console baudrate */
- unsigned long bi_ip_addr; /* IP Address */
- unsigned char bi_enetaddr[6]; /* Ethernet adress */
- struct environment_s *bi_env;
- ulong bi_arch_number; /* unique id for this board */
- ulong bi_boot_params; /* where this board expects params */
- struct /* RAM configuration */
- {
- ulong start;
- ulong size;
- } bi_dram[CONFIG_NR_DRAM_BANKS];
+ int bi_baudrate; /* serial console baudrate */
+ unsigned long bi_ip_addr; /* IP Address */
+ unsigned char bi_enetaddr[6]; /* Ethernet adress */
+ unsigned long bi_arch_number; /* unique id for this board */
+ unsigned long bi_boot_params; /* where this board expects params */
+ unsigned long bi_memstart; /* start of DRAM memory */
+ unsigned long bi_memsize; /* size of DRAM memory in bytes */
+ unsigned long bi_flashstart; /* start of FLASH memory */
+ unsigned long bi_flashsize; /* size of FLASH memory */
+ unsigned long bi_flashoffset; /* reserved area for startup monitor */
} bd_t;
-
#define bi_env_data bi_env->data
#define bi_env_crc bi_env->crc
--- /dev/null
+
+#ifndef _PPC_KERNEL_M8260_PCI_H
+#define _PPC_KERNEL_M8260_PCI_H
+
+#define M8265_PCIBR0 0x101ac
+#define M8265_PCIBR1 0x101b0
+#define M8265_PCIMSK0 0x101c4
+#define M8265_PCIMSK1 0x101c8
+
+/* Bit definitions for PCIBR registers */
+
+#define PCIBR_ENABLE 0x00000001
+
+/* Bit definitions for PCIMSK registers */
+
+#define PCIMSK_32KB 0xFFFF8000 /* Size of window, smallest */
+#define PCIMSK_64KB 0xFFFF0000
+#define PCIMSK_128KB 0xFFFE0000
+#define PCIMSK_256KB 0xFFFC0000
+#define PCIMSK_512KB 0xFFF80000
+#define PCIMSK_1MB 0xFFF00000
+#define PCIMSK_2MB 0xFFE00000
+#define PCIMSK_4MB 0xFFC00000
+#define PCIMSK_8MB 0xFF800000
+#define PCIMSK_16MB 0xFF000000
+#define PCIMSK_32MB 0xFE000000
+#define PCIMSK_64MB 0xFC000000
+#define PCIMSK_128MB 0xF8000000
+#define PCIMSK_256MB 0xF0000000
+#define PCIMSK_512MB 0xE0000000
+#define PCIMSK_1GB 0xC0000000 /* Size of window, largest */
+
+
+#define M826X_SCCR_PCI_MODE_EN 0x100
+
+
+/*
+ * Outbound ATU registers (3 sets). These registers control how 60x bus (local)
+ * addresses are translated to PCI addresses when the MPC826x is a PCI bus
+ * master (initiator).
+ */
+
+#define POTAR_REG0 0x10800 /* PCI Outbound Translation Addr registers */
+#define POTAR_REG1 0x10818
+#define POTAR_REG2 0x10830
+
+#define POBAR_REG0 0x10808 /* PCI Outbound Base Addr registers */
+#define POBAR_REG1 0x10820
+#define POBAR_REG2 0x10838
+
+#define POCMR_REG0 0x10810 /* PCI Outbound Comparison Mask registers */
+#define POCMR_REG1 0x10828
+#define POCMR_REG2 0x10840
+
+/* Bit definitions for POMCR registers */
+
+#define POCMR_MASK_4KB 0x000FFFFF
+#define POCMR_MASK_8KB 0x000FFFFE
+#define POCMR_MASK_16KB 0x000FFFFC
+#define POCMR_MASK_32KB 0x000FFFF8
+#define POCMR_MASK_64KB 0x000FFFF0
+#define POCMR_MASK_128KB 0x000FFFE0
+#define POCMR_MASK_256KB 0x000FFFC0
+#define POCMR_MASK_512KB 0x000FFF80
+#define POCMR_MASK_1MB 0x000FFF00
+#define POCMR_MASK_2MB 0x000FFE00
+#define POCMR_MASK_4MB 0x000FFC00
+#define POCMR_MASK_8MB 0x000FF800
+#define POCMR_MASK_16MB 0x000FF000
+#define POCMR_MASK_32MB 0x000FE000
+#define POCMR_MASK_64MB 0x000FC000
+#define POCMR_MASK_128MB 0x000F8000
+#define POCMR_MASK_256MB 0x000F0000
+#define POCMR_MASK_512MB 0x000E0000
+#define POCMR_MASK_1GB 0x000C0000
+
+#define POCMR_ENABLE 0x80000000
+#define POCMR_PCI_IO 0x40000000
+#define POCMR_PREFETCH_EN 0x20000000
+
+/* Soft PCI reset */
+
+#define PCI_GCR_REG 0x10880
+
+/* Bit definitions for PCI_GCR registers */
+
+#define PCIGCR_PCI_BUS_EN 0x1
+
+/*
+ * Inbound ATU registers (2 sets). These registers control how PCI addresses
+ * are translated to 60x bus (local) addresses when the MPC826x is a PCI bus target.
+ */
+
+#define PITAR_REG1 0x108D0
+#define PIBAR_REG1 0x108D8
+#define PICMR_REG1 0x108E0
+#define PITAR_REG0 0x108E8
+#define PIBAR_REG0 0x108F0
+#define PICMR_REG0 0x108F8
+
+/* Bit definitions for PCI Inbound Comparison Mask registers */
+
+#define PICMR_MASK_4KB 0x000FFFFF
+#define PICMR_MASK_8KB 0x000FFFFE
+#define PICMR_MASK_16KB 0x000FFFFC
+#define PICMR_MASK_32KB 0x000FFFF8
+#define PICMR_MASK_64KB 0x000FFFF0
+#define PICMR_MASK_128KB 0x000FFFE0
+#define PICMR_MASK_256KB 0x000FFFC0
+#define PICMR_MASK_512KB 0x000FFF80
+#define PICMR_MASK_1MB 0x000FFF00
+#define PICMR_MASK_2MB 0x000FFE00
+#define PICMR_MASK_4MB 0x000FFC00
+#define PICMR_MASK_8MB 0x000FF800
+#define PICMR_MASK_16MB 0x000FF000
+#define PICMR_MASK_32MB 0x000FE000
+#define PICMR_MASK_64MB 0x000FC000
+#define PICMR_MASK_128MB 0x000F8000
+#define PICMR_MASK_256MB 0x000F0000
+#define PICMR_MASK_512MB 0x000E0000
+#define PICMR_MASK_1GB 0x000C0000
+
+#define PICMR_ENABLE 0x80000000
+#define PICMR_NO_SNOOP_EN 0x40000000
+#define PICMR_PREFETCH_EN 0x20000000
+
+/* PCI error Registers */
+
+#define PCI_ERROR_STATUS_REG 0x10884
+#define PCI_ERROR_MASK_REG 0x10888
+#define PCI_ERROR_CONTROL_REG 0x1088C
+#define PCI_ERROR_ADRS_CAPTURE_REG 0x10890
+#define PCI_ERROR_DATA_CAPTURE_REG 0x10898
+#define PCI_ERROR_CTRL_CAPTURE_REG 0x108A0
+
+/* PCI error Register bit defines */
+
+#define PCI_ERROR_PCI_ADDR_PAR 0x00000001
+#define PCI_ERROR_PCI_DATA_PAR_WR 0x00000002
+#define PCI_ERROR_PCI_DATA_PAR_RD 0x00000004
+#define PCI_ERROR_PCI_NO_RSP 0x00000008
+#define PCI_ERROR_PCI_TAR_ABT 0x00000010
+#define PCI_ERROR_PCI_SERR 0x00000020
+#define PCI_ERROR_PCI_PERR_RD 0x00000040
+#define PCI_ERROR_PCI_PERR_WR 0x00000080
+#define PCI_ERROR_I2O_OFQO 0x00000100
+#define PCI_ERROR_I2O_IPQO 0x00000200
+#define PCI_ERROR_IRA 0x00000400
+#define PCI_ERROR_NMI 0x00000800
+#define PCI_ERROR_I2O_DBMC 0x00001000
+
+/*
+ * Register pair used to generate configuration cycles on the PCI bus
+ * and access the MPC826x's own PCI configuration registers.
+ */
+
+#define PCI_CFG_ADDR_REG 0x10900
+#define PCI_CFG_DATA_REG 0x10904
+
+/* Bus parking decides where the bus control sits when idle */
+/* If modifying memory controllers for PCI park on the core */
+
+#define PPC_ACR_BUS_PARK_CORE 0x6
+#define PPC_ACR_BUS_PARK_PCI 0x3
+
+#endif /* _PPC_KERNEL_M8260_PCI_H */
# define CFG_RAMBOOT
#endif
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_EEPRO100
+
/*
* Internal Definitions
*
projects / project / bcm63xx / u-boot.git / commitdiff