struct ieee80211_sta *sta,
struct iwl_lq_sta *lq_sta, u32 rate_n_flags);
static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search);
-
+static const char *rs_pretty_lq_type(enum iwl_table_type type);
#ifdef CONFIG_MAC80211_DEBUGFS
static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
struct iwl_scale_tbl_info tbl_type;
struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl;
- IWL_DEBUG_RATE_LIMIT(mvm,
- "get frame ack response, update rate scale window\n");
-
/* Treat uninitialized rate scaling data same as non-existing. */
if (!lq_sta) {
IWL_DEBUG_RATE(mvm, "Station rate scaling not created yet.\n");
u8 update_search_tbl_counter = 0;
int ret;
- if (!iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta))
+ if (!iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta)) {
+ IWL_DEBUG_RATE(mvm, "BT COEX force switch to SISO A\n");
tbl->action = IWL_MIMO2_SWITCH_SISO_A;
+ }
start_action = tbl->action;
while (1) {
struct iwl_mvm_sta *sta_priv = (void *)sta->drv_priv;
struct iwl_mvm_tid_data *tid_data;
- IWL_DEBUG_RATE(mvm, "rate scale calculate new rate for skb\n");
-
/* Send management frames and NO_ACK data using lowest rate. */
/* TODO: this could probably be improved.. */
if (!ieee80211_is_data(hdr->frame_control) ||
/* current tx rate */
index = lq_sta->last_txrate_idx;
- IWL_DEBUG_RATE(mvm, "Rate scale index %d for type %d\n", index,
- tbl->lq_type);
-
/* rates available for this association, and for modulation mode */
rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
- IWL_DEBUG_RATE(mvm, "mask 0x%04X\n", rate_mask);
-
/* mask with station rate restriction */
if (is_legacy(tbl->lq_type)) {
if (lq_sta->band == IEEE80211_BAND_5GHZ)
index = lq_sta->max_rate_idx;
update_lq = 1;
window = &(tbl->win[index]);
+ IWL_DEBUG_RATE(mvm,
+ "Forcing user max rate %d\n",
+ index);
goto lq_update;
}
if ((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
(window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) {
IWL_DEBUG_RATE(mvm,
- "LQ: still below TH. succ=%d total=%d for index %d\n",
- window->success_counter, window->counter, index);
+ "(%s: %d): Test Window: succ %d total %d\n",
+ rs_pretty_lq_type(tbl->lq_type),
+ index, window->success_counter, window->counter);
/* Can't calculate this yet; not enough history */
window->average_tpt = IWL_INVALID_VALUE;
* continuing to use the setup that we've been trying. */
if (window->average_tpt > lq_sta->last_tpt) {
IWL_DEBUG_RATE(mvm,
- "LQ: SWITCHING TO NEW TABLE suc=%d cur-tpt=%d old-tpt=%d\n",
+ "SWITCHING TO NEW TABLE SR: %d "
+ "cur-tpt %d old-tpt %d\n",
window->success_ratio,
window->average_tpt,
lq_sta->last_tpt);
/* Else poor success; go back to mode in "active" table */
} else {
IWL_DEBUG_RATE(mvm,
- "LQ: GOING BACK TO THE OLD TABLE suc=%d cur-tpt=%d old-tpt=%d\n",
+ "GOING BACK TO THE OLD TABLE: SR %d "
+ "cur-tpt %d old-tpt %d\n",
window->success_ratio,
window->average_tpt,
lq_sta->last_tpt);
if (high != IWL_RATE_INVALID)
high_tpt = tbl->win[high].average_tpt;
+ IWL_DEBUG_RATE(mvm,
+ "(%s: %d): cur_tpt %d SR %d low %d high %d low_tpt %d high_tpt %d\n",
+ rs_pretty_lq_type(tbl->lq_type), index, current_tpt,
+ sr, low, high, low_tpt, high_tpt);
+
scale_action = 0;
/* Too many failures, decrease rate */
if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) {
IWL_DEBUG_RATE(mvm,
- "decrease rate because of low success_ratio\n");
+ "decrease rate because of low SR\n");
scale_action = -1;
/* No throughput measured yet for adjacent rates; try increase. */
} else if ((low_tpt == IWL_INVALID_VALUE) &&
(high_tpt == IWL_INVALID_VALUE)) {
- if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH)
+ if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH) {
+ IWL_DEBUG_RATE(mvm,
+ "Good SR and no high rate measurement. "
+ "Increase rate\n");
scale_action = 1;
- else if (low != IWL_RATE_INVALID)
+ } else if (low != IWL_RATE_INVALID) {
+ IWL_DEBUG_RATE(mvm,
+ "Remain in current rate\n");
scale_action = 0;
+ }
}
/* Both adjacent throughputs are measured, but neither one has better
else if ((low_tpt != IWL_INVALID_VALUE) &&
(high_tpt != IWL_INVALID_VALUE) &&
(low_tpt < current_tpt) &&
- (high_tpt < current_tpt))
+ (high_tpt < current_tpt)) {
+ IWL_DEBUG_RATE(mvm,
+ "Both high and low are worse. "
+ "Maintain rate\n");
scale_action = 0;
+ }
/* At least one adjacent rate's throughput is measured,
* and may have better performance. */
/* Higher rate has better throughput */
if (high_tpt > current_tpt &&
sr >= IWL_RATE_INCREASE_TH) {
+ IWL_DEBUG_RATE(mvm,
+ "Higher rate is better and good "
+ "SR. Increate rate\n");
scale_action = 1;
} else {
+ IWL_DEBUG_RATE(mvm,
+ "Higher rate isn't better OR "
+ "no good SR. Maintain rate\n");
scale_action = 0;
}
/* Lower rate has better throughput */
if (low_tpt > current_tpt) {
IWL_DEBUG_RATE(mvm,
- "decrease rate because of low tpt\n");
+ "Lower rate is better. "
+ "Decrease rate\n");
scale_action = -1;
} else if (sr >= IWL_RATE_INCREASE_TH) {
+ IWL_DEBUG_RATE(mvm,
+ "Lower rate isn't better and "
+ "good SR. Increase rate\n");
scale_action = 1;
}
}
* has been good at old rate. Don't change it. */
if ((scale_action == -1) && (low != IWL_RATE_INVALID) &&
((sr > IWL_RATE_HIGH_TH) ||
- (current_tpt > (100 * tbl->expected_tpt[low]))))
+ (current_tpt > (100 * tbl->expected_tpt[low])))) {
+ IWL_DEBUG_RATE(mvm,
+ "Sanity check failed. Maintain rate\n");
scale_action = 0;
+ }
/* Force a search in case BT doesn't like us being in MIMO */
if (is_mimo(tbl->lq_type) &&
!iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta)) {
+ IWL_DEBUG_RATE(mvm,
+ "BT Coex forbids MIMO. Search for new config\n");
rs_stay_in_table(lq_sta, true);
goto lq_update;
}
if (low != IWL_RATE_INVALID) {
update_lq = 1;
index = low;
+ } else {
+ IWL_DEBUG_RATE(mvm,
+ "At the bottom rate. Can't decrease\n");
}
break;
if (high != IWL_RATE_INVALID) {
update_lq = 1;
index = high;
+ } else {
+ IWL_DEBUG_RATE(mvm,
+ "At the top rate. Can't increase\n");
}
break;
break;
}
- IWL_DEBUG_RATE(mvm,
- "choose rate scale index %d action %d low %d high %d type %d\n",
- index, scale_action, low, high, tbl->lq_type);
-
lq_update:
/* Replace uCode's rate table for the destination station. */
if (update_lq)
/* Save current throughput to compare with "search" throughput*/
lq_sta->last_tpt = current_tpt;
+ IWL_DEBUG_RATE(mvm,
+ "Start Search: update_lq %d done_search %d stay_in_tbl %d win->counter %d\n",
+ update_lq, done_search, lq_sta->stay_in_tbl,
+ window->counter);
/* Select a new "search" modulation mode to try.
* If one is found, set up the new "search" table. */
if (is_legacy(tbl->lq_type))
index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
IWL_DEBUG_RATE(mvm,
- "Switch current mcs: %X index: %d\n",
- tbl->current_rate, index);
+ "Switch to SEARCH TABLE: "
+ "mcs %X (%s: %d)\n",
+ tbl->current_rate,
+ rs_pretty_lq_type(tbl->lq_type),
+ index);
rs_fill_link_cmd(mvm, sta, lq_sta, tbl->current_rate);
iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, false);
} else {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct iwl_lq_sta *lq_sta = mvm_sta;
- IWL_DEBUG_RATE_LIMIT(mvm, "rate scale calculate new rate for skb\n");
-
/* Get max rate if user set max rate */
if (lq_sta) {
lq_sta->max_rate_idx = txrc->max_rate_idx;
>> RATE_MCS_ANT_POS);
if ((valid_tx_ant & ant_sel_tx) == ant_sel_tx) {
*rate_n_flags = lq_sta->dbg_fixed_rate;
- IWL_DEBUG_RATE(mvm, "Fixed rate ON\n");
} else {
lq_sta->dbg_fixed_rate = 0;
IWL_ERR(mvm,
ant_sel_tx, valid_tx_ant);
IWL_DEBUG_RATE(mvm, "Fixed rate OFF\n");
}
- } else {
- IWL_DEBUG_RATE(mvm, "Fixed rate OFF\n");
}
}
return count;
}
+static const char *rs_pretty_lq_type(enum iwl_table_type type)
+{
+ static const char * const lq_type[] = {
+ [LQ_NONE] = "NONE",
+ [LQ_LEGACY_A] = "LEGACY_A",
+ [LQ_LEGACY_G] = "LEGACY_G",
+ [LQ_HT_SISO] = "HT SISO",
+ [LQ_HT_MIMO2] = "HT MIMO",
+ [LQ_VHT_SISO] = "VHT SISO",
+ [LQ_VHT_MIMO2] = "VHT MIMO",
+ };
+
+ if (type < LQ_NONE || type >= LQ_MAX)
+ return "UNKNOWN";
+
+ return lq_type[type];
+}
+
static int rs_pretty_print_rate(char *buf, const u32 rate)
{
static const char * const ant_name[] = {
projects / openwrt / staging / blogic.git / commitdiff