--- a/nl80211.h
+++ b/nl80211.h
-@@ -1555,6 +1555,9 @@ enum nl80211_commands {
+@@ -303,8 +303,9 @@
+ * passed, all channels allowed for the current regulatory domain
+ * are used. Extra IEs can also be passed from the userspace by
+ * using the %NL80211_ATTR_IE attribute.
+- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT
+- * if scheduled scan is not running.
++ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
++ * scheduled scan is not running. The caller may assume that as soon
++ * as the call returns, it is safe to start a new scheduled scan again.
+ * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
+ * results available.
+ * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
+@@ -418,8 +419,18 @@
+ * %NL80211_ATTR_SSID attribute, and can optionally specify the association
+ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
+ * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+- * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
+- * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
++ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
++ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and
++ * %NL80211_ATTR_WIPHY_FREQ_HINT.
++ * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are
++ * restrictions on BSS selection, i.e., they effectively prevent roaming
++ * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT
++ * can be included to provide a recommendation of the initial BSS while
++ * allowing the driver to roam to other BSSes within the ESS and also to
++ * ignore this recommendation if the indicated BSS is not ideal. Only one
++ * set of BSSID,frequency parameters is used (i.e., either the enforcing
++ * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
++ * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
+ * Background scan period can optionally be
+ * specified in %NL80211_ATTR_BG_SCAN_PERIOD,
+ * if not specified default background scan configuration
+@@ -1555,6 +1566,22 @@ enum nl80211_commands {
* data is in the format defined for the payload of the QoS Map Set element
* in IEEE Std 802.11-2012, 8.4.2.97.
*
++ * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS
++ * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS
++ *
++ * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many
++ * associated stations are supported in AP mode (including P2P GO); u32.
++ * Since drivers may not have a fixed limit on the maximum number (e.g.,
++ * other concurrent operations may affect this), drivers are allowed to
++ * advertise values that cannot always be met. In such cases, an attempt
++ * to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
++ *
++ * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
++ * As specified in the &enum nl80211_tdls_peer_capability.
++ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ * transmit power to stay within regulatory limits. u32, dBi.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
-@@ -1883,6 +1886,8 @@ enum nl80211_attrs {
+@@ -1883,6 +1910,15 @@ enum nl80211_attrs {
NL80211_ATTR_QOS_MAP,
++ NL80211_ATTR_MAC_HINT,
++ NL80211_ATTR_WIPHY_FREQ_HINT,
++
++ NL80211_ATTR_MAX_AP_ASSOC_STA,
++
++ NL80211_ATTR_TDLS_PEER_CAPABILITY,
++
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
-@@ -2442,9 +2447,15 @@ enum nl80211_reg_rule_attr {
+@@ -2304,6 +2340,7 @@ enum nl80211_band_attr {
+ * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
+ * using this channel as the primary or any of the secondary channels
+ * isn't possible
++ * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
+ * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
+ * currently defined
+ * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
+@@ -2322,6 +2359,7 @@ enum nl80211_frequency_attr {
+ NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
+ NL80211_FREQUENCY_ATTR_NO_80MHZ,
+ NL80211_FREQUENCY_ATTR_NO_160MHZ,
++ NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
+
+ /* keep last */
+ __NL80211_FREQUENCY_ATTR_AFTER_LAST,
+@@ -2412,12 +2450,14 @@ enum nl80211_reg_type {
+ * in KHz. This is not a center a frequency but an actual regulatory
+ * band edge.
+ * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
+- * frequency range, in KHz.
++ * frequency range, in KHz.
+ * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
+ * for a given frequency range. The value is in mBi (100 * dBi).
+ * If you don't have one then don't send this.
+ * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
+ * a given frequency range. The value is in mBm (100 * dBm).
++ * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
++ * If not present or 0 default CAC time will be used.
+ * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
+ * currently defined
+ * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
+@@ -2433,6 +2473,8 @@ enum nl80211_reg_rule_attr {
+ NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
+ NL80211_ATTR_POWER_RULE_MAX_EIRP,
+
++ NL80211_ATTR_DFS_CAC_TIME,
++
+ /* keep last */
+ __NL80211_REG_RULE_ATTR_AFTER_LAST,
+ NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
+@@ -2442,9 +2484,15 @@ enum nl80211_reg_rule_attr {
* enum nl80211_sched_scan_match_attr - scheduled scan match attributes
* @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
* @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
* @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
* attribute number currently defined
* @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
+@@ -2477,6 +2525,9 @@ enum nl80211_sched_scan_match_attr {
+ * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
+ * this includes probe requests or modes of operation that require
+ * beaconing.
++ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
++ * base on contiguous rules and wider channels will be allowed to cross
++ * multiple contiguous/overlapping frequency ranges.
+ */
+ enum nl80211_reg_rule_flags {
+ NL80211_RRF_NO_OFDM = 1<<0,
+@@ -2488,6 +2539,7 @@ enum nl80211_reg_rule_flags {
+ NL80211_RRF_PTMP_ONLY = 1<<6,
+ NL80211_RRF_NO_IR = 1<<7,
+ __NL80211_RRF_NO_IBSS = 1<<8,
++ NL80211_RRF_AUTO_BW = 1<<11,
+ };
+
+ #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
+@@ -3131,6 +3183,7 @@ enum nl80211_key_attributes {
+ * in an array of MCS numbers.
+ * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
+ * see &struct nl80211_txrate_vht
++ * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi
+ * @__NL80211_TXRATE_AFTER_LAST: internal
+ * @NL80211_TXRATE_MAX: highest TX rate attribute
+ */
+@@ -3139,6 +3192,7 @@ enum nl80211_tx_rate_attributes {
+ NL80211_TXRATE_LEGACY,
+ NL80211_TXRATE_HT,
+ NL80211_TXRATE_VHT,
++ NL80211_TXRATE_GI,
+
+ /* keep last */
+ __NL80211_TXRATE_AFTER_LAST,
+@@ -3156,6 +3210,12 @@ struct nl80211_txrate_vht {
+ __u16 mcs[NL80211_VHT_NSS_MAX];
+ };
+
++enum nl80211_txrate_gi {
++ NL80211_TXRATE_DEFAULT_GI,
++ NL80211_TXRATE_FORCE_SGI,
++ NL80211_TXRATE_FORCE_LGI,
++};
++
+ /**
+ * enum nl80211_band - Frequency band
+ * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
+@@ -3801,11 +3861,6 @@ enum nl80211_ap_sme_features {
+ * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
+ * to work properly to suppport receiving regulatory hints from
+ * cellular base stations.
+- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
+- * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
+- * in the interface combinations, even when it's only used for scan
+- * and remain-on-channel. This could be due to, for example, the
+- * remain-on-channel implementation requiring a channel context.
+ * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
+ * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
+ * mode
+@@ -3847,7 +3902,7 @@ enum nl80211_feature_flags {
+ NL80211_FEATURE_HT_IBSS = 1 << 1,
+ NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
+ NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
+- NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4,
++ /* bit 4 is reserved - don't use */
+ NL80211_FEATURE_SAE = 1 << 5,
+ NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6,
+ NL80211_FEATURE_SCAN_FLUSH = 1 << 7,
+@@ -4037,4 +4092,20 @@ struct nl80211_vendor_cmd_info {
+ __u32 subcmd;
+ };
+
++/**
++ * enum nl80211_tdls_peer_capability - TDLS peer flags.
++ *
++ * Used by tdls_mgmt() to determine which conditional elements need
++ * to be added to TDLS Setup frames.
++ *
++ * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
++ * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
++ * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
++ */
++enum nl80211_tdls_peer_capability {
++ NL80211_TDLS_PEER_HT = 1<<0,
++ NL80211_TDLS_PEER_VHT = 1<<1,
++ NL80211_TDLS_PEER_WMM = 1<<2,
++};
++
+ #endif /* __LINUX_NL80211_H */
projects / openwrt / staging / chunkeey.git / commitdiff