ramips: TEW-692GR.dts fixes

* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36268

diff --git a/target/linux/ramips/dts/TEW-692GR.dts b/target/linux/ramips/dts/TEW-692GR.dts
index 8ead5fc03ffa3b974ca9992bfa81d5f5c321ab36..0e7b15df8ff0b1b0258d07b5caa8e847617d7200 100644 (file)
--- a/target/linux/ramips/dts/TEW-692GR.dts
+++ b/target/linux/ramips/dts/TEW-692GR.dts
@@ -12,9 +12,10 @@
 
        palmbus@10000000 {
                sysc@0 {
-                       ralink,pinmux = "uartlite", "spi";
-                       ralink,gpiomux = "i2c", "jtag";
+                       ralink,pinmux = "uartlite";
+                       ralink,gpiomux = "i2c", "jtag", "spi";
                        ralink,uartmux = "gpio";
+                       ralink,pcimux = "pci-fnc";
                        ralink,wdtmux = <1>;
                };
 
@@ -29,19 +30,6 @@
                gpio1: gpio@638 {
                        status = "okay";
                };
-
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "mx25l6405d";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80";
-                               spi-max-frequency = <25000000>;
-                       };
-               };
        };
 
        ethernet@10100000 {
@@ -50,11 +38,53 @@
                phy-mode = "rgmii";
        };
 
+       pci@10140000 {
+               status = "okay";
+
+               host-bridge {
+                       pci-bridge@1 {
+                               status = "okay";
+                       };
+               };
+       };
+
        wmac@10180000 {
                status = "okay";
                ralink,5ghz = <0>;
        };
 
+       nor-flash@1c000000 {
+               compatible = "cfi-flash";
+               reg = <0x1c000000 0x800000>;
+
+               bank-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partition@0 {
+                       reg = <0x0 0x0030000>;
+                       label = "u-boot";
+                       read-only;
+               };
+
+               partition@30000 {
+                       reg = <0x00030000 0x00010000>;
+                       label = "u-boot-env";
+                       read-only;
+               };
+
+               partition@40000 {
+                       reg = <0x00040000 0x00010000>;
+                       label = "factory";
+                       read-only;
+               };
+
+               partition@50000 {
+                       reg = <0x00050000 0x007b0000>;
+                       label = "firmware";
+               };
+       };
+
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;