--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ubnt,unifi-nanohd", "mediatek,mt7621-soc";
+ model = "Ubiquiti UniFi nanoHD";
+
+ aliases {
+ led-boot = &led_white;
+ led-failsafe = &led_white;
+ led-running = &led_blue;
+ led-upgrade = &led_blue;
+
+ label-mac-device = ðernet;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_blue: dome_blue {
+ label = "nanohd:blue:dome";
+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_white: dome_white {
+ label = "nanohd:white:dome";
+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "mx25l25635f", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x60000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "u-boot-env";
+ reg = <0x60000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@70000 {
+ label = "factory";
+ reg = <0x70000 0x10000>;
+ read-only;
+ };
+
+ eeprom: partition@80000 {
+ label = "eeprom";
+ reg = <0x80000 0x10000>;
+ read-only;
+ };
+
+ partition@90000 {
+ label = "bs";
+ reg = <0x90000 0x10000>;
+ };
+
+ partition@a0000 {
+ label = "cfg";
+ reg = <0xa0000 0x100000>;
+ read-only;
+ };
+
+ partition@1a0000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x1a0000 0xf30000>;
+ };
+
+ partition@10d0000 {
+ label = "kernel1";
+ reg = <0x10d0000 0xf30000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ };
+};
+
+&pcie1 {
+ wifi@0,0 {
+ reg = <0x0 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&eeprom 0x0>;
+};
+
+&state_default {
+ gpio {
+ ralink,group = "i2c", "uart2";
+ ralink,function = "gpio";
+ };
+};