DEVICE_MODEL := ROCK Pi S
SOC := rk3308
BOOT_SCRIPT := rock-pi-s
- DEVICE_PACKAGES := kmod-usb-net-cdc-ncm kmod-usb-net-rndis
+ DEVICE_PACKAGES := kmod-rtw88-8723ds kmod-usb-net-cdc-ncm kmod-usb-net-rndis wpad-basic-mbedtls
endef
TARGET_DEVICES += radxa_rock-pi-s
--- /dev/null
+From 0536fa6e6fa3e48f4ca11855b586c277be524fbe Mon Sep 17 00:00:00 2001
+From: David Wu <david.wu@rock-chips.com>
+Date: Tue, 21 May 2024 21:10:13 +0000
+Subject: [PATCH] soc: rockchip: io-domain: Add RK3308 IO voltage domains
+
+Add IO voltage domains support for the RK3308 SoC.
+
+Signed-off-by: David Wu <david.wu@rock-chips.com>
+Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
+Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
+Link: https://lore.kernel.org/r/20240521211029.1236094-11-jonas@kwiboo.se
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ drivers/soc/rockchip/io-domain.c | 40 ++++++++++++++++++++++++++++++++
+ 1 file changed, 40 insertions(+)
+
+--- a/drivers/soc/rockchip/io-domain.c
++++ b/drivers/soc/rockchip/io-domain.c
+@@ -39,6 +39,10 @@
+ #define RK3288_SOC_CON2_FLASH0 BIT(7)
+ #define RK3288_SOC_FLASH_SUPPLY_NUM 2
+
++#define RK3308_SOC_CON0 0x300
++#define RK3308_SOC_CON0_VCCIO3 BIT(8)
++#define RK3308_SOC_VCCIO3_SUPPLY_NUM 3
++
+ #define RK3328_SOC_CON4 0x410
+ #define RK3328_SOC_CON4_VCCIO2 BIT(7)
+ #define RK3328_SOC_VCCIO2_SUPPLY_NUM 1
+@@ -229,6 +233,25 @@ static void rk3288_iodomain_init(struct
+ dev_warn(iod->dev, "couldn't update flash0 ctrl\n");
+ }
+
++static void rk3308_iodomain_init(struct rockchip_iodomain *iod)
++{
++ int ret;
++ u32 val;
++
++ /* if no vccio3 supply we should leave things alone */
++ if (!iod->supplies[RK3308_SOC_VCCIO3_SUPPLY_NUM].reg)
++ return;
++
++ /*
++ * set vccio3 iodomain to also use this framework
++ * instead of a special gpio.
++ */
++ val = RK3308_SOC_CON0_VCCIO3 | (RK3308_SOC_CON0_VCCIO3 << 16);
++ ret = regmap_write(iod->grf, RK3308_SOC_CON0, val);
++ if (ret < 0)
++ dev_warn(iod->dev, "couldn't update vccio3 vsel ctrl\n");
++}
++
+ static void rk3328_iodomain_init(struct rockchip_iodomain *iod)
+ {
+ int ret;
+@@ -376,6 +399,19 @@ static const struct rockchip_iodomain_so
+ .init = rk3288_iodomain_init,
+ };
+
++static const struct rockchip_iodomain_soc_data soc_data_rk3308 = {
++ .grf_offset = 0x300,
++ .supply_names = {
++ "vccio0",
++ "vccio1",
++ "vccio2",
++ "vccio3",
++ "vccio4",
++ "vccio5",
++ },
++ .init = rk3308_iodomain_init,
++};
++
+ static const struct rockchip_iodomain_soc_data soc_data_rk3328 = {
+ .grf_offset = 0x410,
+ .supply_names = {
+@@ -529,6 +565,10 @@ static const struct of_device_id rockchi
+ .data = &soc_data_rk3288
+ },
+ {
++ .compatible = "rockchip,rk3308-io-voltage-domain",
++ .data = &soc_data_rk3308
++ },
++ {
+ .compatible = "rockchip,rk3328-io-voltage-domain",
+ .data = &soc_data_rk3328
+ },
--- /dev/null
+From d1829ba469d5743734e37d59fece73e3668ab084 Mon Sep 17 00:00:00 2001
+From: Jonas Karlman <jonas@kwiboo.se>
+Date: Tue, 21 May 2024 21:10:14 +0000
+Subject: [PATCH] arm64: dts: rockchip: Add rk3308 IO voltage domains
+
+Add a disabled RK3308 IO voltage domains node to SoC DT.
+
+Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
+Link: https://lore.kernel.org/r/20240521211029.1236094-12-jonas@kwiboo.se
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3308.dtsi | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+@@ -168,6 +168,11 @@
+ compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd";
+ reg = <0x0 0xff000000 0x0 0x08000>;
+
++ io_domains: io-domains {
++ compatible = "rockchip,rk3308-io-voltage-domain";
++ status = "disabled";
++ };
++
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x500>;
--- /dev/null
+From 100b3bdee6035192f6d4a1847970fe004bb505fb Mon Sep 17 00:00:00 2001
+From: Jonas Karlman <jonas@kwiboo.se>
+Date: Tue, 21 May 2024 21:10:15 +0000
+Subject: [PATCH] arm64: dts: rockchip: Add io-domains to rk3308-rock-pi-s
+
+The VCCIO4 io-domain used for WiFi/BT is using 1v8 IO signal voltage.
+
+Add io-domains node with the VCCIO supplies connected on the board.
+
+Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
+Link: https://lore.kernel.org/r/20240521211029.1236094-13-jonas@kwiboo.se
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+@@ -231,6 +231,16 @@
+ status = "okay";
+ };
+
++&io_domains {
++ vccio0-supply = <&vcc_io>;
++ vccio1-supply = <&vcc_io>;
++ vccio2-supply = <&vcc_io>;
++ vccio3-supply = <&vcc_io>;
++ vccio4-supply = <&vcc_1v8>;
++ vccio5-supply = <&vcc_io>;
++ status = "okay";
++};
++
+ &pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_32k>;
--- /dev/null
+From 12c3ec878cbe3709782e85b88124abecc3bb8617 Mon Sep 17 00:00:00 2001
+From: Jonas Karlman <jonas@kwiboo.se>
+Date: Tue, 21 May 2024 21:10:16 +0000
+Subject: [PATCH] arm64: dts: rockchip: Update WIFi/BT related nodes on
+ rk3308-rock-pi-s
+
+Update WiFi SDIO and BT UART related props to better reflect details
+about the optional onboard RTL8723DS WiFi/BT module.
+
+Also correct the compatible used for bluetooth to match the WiFi/BT
+module used on the board.
+
+Fixes: bc3753aed81f ("arm64: dts: rockchip: rock-pi-s add more peripherals")
+Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
+Link: https://lore.kernel.org/r/20240521211029.1236094-14-jonas@kwiboo.se
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3308-rock-pi-s.dts | 40 +++++++++++++++++--
+ 1 file changed, 36 insertions(+), 4 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+@@ -17,6 +17,7 @@
+ ethernet0 = &gmac;
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
++ mmc2 = &sdio;
+ };
+
+ chosen {
+@@ -245,6 +246,20 @@
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_32k>;
+
++ bluetooth {
++ bt_reg_on: bt-reg-on {
++ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ bt_wake_host: bt-wake-host {
++ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
++ };
++
++ host_wake_bt: host-wake-bt {
++ rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
+ gmac {
+ mac_rst: mac-rst {
+ rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+@@ -294,11 +309,24 @@
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+- max-frequency = <1000000>;
++ max-frequency = <100000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
++ no-mmc;
++ no-sd;
+ non-removable;
+- sd-uhs-sdr104;
++ sd-uhs-sdr50;
++ vmmc-supply = <&vcc_io>;
++ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
++
++ rtl8723ds: wifi@1 {
++ reg = <1>;
++ interrupt-parent = <&gpio0>;
++ interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "host-wake";
++ pinctrl-names = "default";
++ pinctrl-0 = <&wifi_host_wake>;
++ };
+ };
+
+ &sdmmc {
+@@ -330,12 +358,16 @@
+ };
+
+ &uart4 {
++ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+- compatible = "realtek,rtl8723bs-bt";
+- device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
++ compatible = "realtek,rtl8723ds-bt";
++ device-wake-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
++ enable-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+ host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
+ };
+ };
+
--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
-@@ -17,6 +17,10 @@
- ethernet0 = &gmac;
+@@ -18,6 +18,10 @@
mmc0 = &emmc;
mmc1 = &sdmmc;
+ mmc2 = &sdio;
+ led-boot = &blue_led;
+ led-failsafe = &blue_led;
+ led-running = &blue_led;
};
chosen {
-@@ -28,22 +32,19 @@
+@@ -29,22 +33,19 @@
pinctrl-names = "default";
pinctrl-0 = <&green_led>, <&heartbeat_led>;