if (mct_int_type == MCT_INT_SPI) {
if (cpu == 0) {
mct_tick0_event_irq.dev_id = mevt;
- evt->irq = IRQ_MCT_L0;
- setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+ evt->irq = EXYNOS4_IRQ_MCT_L0;
+ setup_irq(EXYNOS4_IRQ_MCT_L0, &mct_tick0_event_irq);
} else {
mct_tick1_event_irq.dev_id = mevt;
- evt->irq = IRQ_MCT_L1;
- setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
- irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+ evt->irq = EXYNOS4_IRQ_MCT_L1;
+ setup_irq(EXYNOS4_IRQ_MCT_L1, &mct_tick1_event_irq);
+ irq_set_affinity(EXYNOS4_IRQ_MCT_L1, cpumask_of(1));
}
} else {
- enable_percpu_irq(IRQ_MCT_LOCALTIMER, 0);
+ enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
}
-}
-
-/* Setup the local clock events for a CPU */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
- exynos4_mct_tick_init(evt);
return 0;
}
else
remove_irq(evt->irq, &mct_tick1_event_irq);
else
- disable_percpu_irq(IRQ_MCT_LOCALTIMER);
+ disable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER);
}
+
+static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = {
+ .setup = exynos4_local_timer_setup,
+ .stop = exynos4_local_timer_stop,
+};
#endif /* CONFIG_LOCAL_TIMERS */
static void __init exynos4_timer_resources(void)
exynos4_mct_tick_isr, "MCT",
&percpu_mct_tick);
WARN(err, "MCT: can't request IRQ %d (%d)\n",
- IRQ_MCT_LOCALTIMER, err);
+ EXYNOS_IRQ_MCT_LOCALTIMER, err);
}
+
+ local_timer_register(&exynos4_mct_tick_ops);
#endif /* CONFIG_LOCAL_TIMERS */
}
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pinmux-tegra30-tables.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o
-obj-$(CONFIG_SMP) += platsmp.o localtimer.o headsmp.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+ obj-$(CONFIG_SMP) += reset.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o apbio.o
obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o
menu "Ux500 target platform (boards)"
-config MACH_U8500
- bool "U8500 Development platform"
- depends on UX500_SOC_DB8500
- select TPS6105X
+config MACH_MOP500
+ bool "U8500 Development platform, MOP500 versions"
+ select UX500_SOC_DB8500
+ select I2C
+ select I2C_NOMADIK
+ select SOC_BUS
help
- Include support for the mop500 development platform.
+ Include support for the MOP500 development platform.
config MACH_HREFV60
- bool "U85000 Development platform, HREFv60 version"
- depends on UX500_SOC_DB8500
- help
- Include support for the HREFv60 new development platform.
+ bool "U8500 Development platform, HREFv60 version"
+ select MACH_MOP500
+ help
+ Include support for the HREFv60 new development platform.
+ Includes HREFv70, v71 etc.
config MACH_SNOWBALL
bool "U8500 Snowball platform"
extern void __init ux500_init_irq(void);
- extern void __init u5500_sdi_init(void);
+ extern void __init u5500_sdi_init(struct device *parent);
- extern void __init db5500_dma_init(void);
+ extern void __init db5500_dma_init(struct device *parent);
+
+ extern struct device *ux500_soc_device_init(const char *soc_id);
-/* We re-use nomadik_timer for this platform */
-extern void nmdk_timer_init(void);
-
struct amba_device;
extern void __init amba_add_devices(struct amba_device *devs[], int num);