--- /dev/null
+/*
+ * EW Balin board support
+ * (based on Atheros DB120 reference board support)
+ *
+ * Copyright (c) 2011 Qualcomm Atheros
+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2017 Embedded Wireless GmbH www.80211.de
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define BALIN_GPIO_LED_STATUS 14
+
+#define BALIN_GPIO_BTN_WPS 18
+
+#define BALIN_KEYS_POLL_INTERVAL 20 /* msecs */
+#define BALIN_KEYS_DEBOUNCE_INTERVAL (3 * BALIN_KEYS_POLL_INTERVAL)
+
+#define BALIN_CALDATA_OFFSET 0x1000
+#define BALIN_WMAC_MAC_OFFSET (BALIN_CALDATA_OFFSET + 0x02)
+
+static struct gpio_led balin_leds_gpio[] __initdata = {
+ {
+ .name = "balin:green:status",
+ .gpio = BALIN_GPIO_LED_STATUS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button balin_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = BALIN_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = BALIN_GPIO_BTN_WPS,
+ .active_low = 0,
+ },
+};
+
+
+static void __init balin_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ static u8 mac[6];
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(balin_leds_gpio),
+ balin_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, BALIN_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(balin_gpio_keys),
+ balin_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_wmac(art + BALIN_CALDATA_OFFSET, NULL);
+
+ ath79_register_pci();
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(1, 0x0);
+
+ /* GMAC1 is connected to the internal switch */
+ memcpy(mac, art + BALIN_WMAC_MAC_OFFSET, sizeof(mac));
+ mac[3] |= 0x40;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_EW_BALIN, "EW-BALIN", "EmbWir-Balin",
+ balin_setup);
projects / openwrt / staging / ansuel.git / commitdiff