128 -> Beholder BeholdTV Columbus TVFM [0000:5201]
129 -> Beholder BeholdTV 607 / BeholdTV 609 [5ace:6070,5ace:6071,5ace:6072,5ace:6073,5ace:6090,5ace:6091,5ace:6092,5ace:6093]
130 -> Beholder BeholdTV M6 / BeholdTV M6 Extra [5ace:6190,5ace:6193]
+131 -> Twinhan Hybrid DTV-DVB 3056 PCI [1822:0022]
},
.mpeg = SAA7134_MPEG_EMPRESS,
},
+ [SAA7134_BOARD_TWINHAN_DTV_DVB_3056] = {
+ .name = "Twinhan Hybrid DTV-DVB 3056 PCI",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tuner_config = 2,
+ .mpeg = SAA7134_MPEG_DVB,
+ .gpiomask = 0x0200000,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ }, {
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE1,
+ }, {
+ .name = name_svideo,
+ .vmux = 8, /* untested */
+ .amux = LINE1,
+ } },
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x0200000,
+ },
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x4e42,
.subdevice = 0x3502,
- .driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS
+ .driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS,
+ }, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1822, /*Twinhan Technology Co. Ltd*/
+ .subdevice = 0x0022,
+ .driver_data = SAA7134_BOARD_TWINHAN_DTV_DVB_3056,
},{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
- case SAA7134_BOARD_AVERMEDIA_SUPER_007:
+ case SAA7134_BOARD_AVERMEDIA_SUPER_007:
+ case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
/* this is a hybrid board, initialize to analog mode
* and configure firmware eeprom address
*/
.request_firmware = philips_tda1004x_request_firmware
};
+static struct tda1004x_config twinhan_dtv_dvb_3056_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP01_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x42,
+ .tuner_address = 0x61,
+ .tuner_config = 2,
+ .antenna_switch = 1,
+ .request_firmware = philips_tda1004x_request_firmware
+};
+
/* ------------------------------------------------------------------
* special case: this card uses saa713x GPIO22 for the mode switch
*/
case SAA7134_BOARD_AVERMEDIA_SUPER_007:
configure_tda827x_fe(dev, &avermedia_super_007_config);
break;
+ case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
+ configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config);
+ break;
default:
wprintk("Huh? unknown DVB card?\n");
break;