With this we can eliminate some duplicate code in panel drivers.
Also lgphilips-lb035q02, nec-nl8048hl11-01b, picodlp and
tpo-td043mtea1 gain support of reading timings over sysfs.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
}
}
-static void acx_panel_get_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings)
-{
- *timings = dssdev->panel.timings;
-}
-
static int acx_panel_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
.resume = acx_panel_resume,
.set_timings = acx_panel_set_timings,
- .get_timings = acx_panel_get_timings,
.check_timings = acx_panel_check_timings,
.get_recommended_bpp = acx_get_recommended_bpp,
dpi_set_timings(dssdev, timings);
}
-static void generic_dpi_panel_get_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings)
-{
- *timings = dssdev->panel.timings;
-}
-
static int generic_dpi_panel_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
.resume = generic_dpi_panel_resume,
.set_timings = generic_dpi_panel_set_timings,
- .get_timings = generic_dpi_panel_get_timings,
.check_timings = generic_dpi_panel_check_timings,
.driver = {
return 0;
}
-static void n8x0_panel_get_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings)
-{
- *timings = dssdev->panel.timings;
-}
-
static void n8x0_panel_get_resolution(struct omap_dss_device *dssdev,
u16 *xres, u16 *yres)
{
.get_resolution = n8x0_panel_get_resolution,
.get_recommended_bpp = omapdss_default_get_recommended_bpp,
- .get_timings = n8x0_panel_get_timings,
-
.driver = {
.name = "n8x0_panel",
.owner = THIS_MODULE,
.update_status = taal_bl_update_status,
};
-static void taal_get_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings)
-{
- *timings = dssdev->panel.timings;
-}
-
static void taal_get_resolution(struct omap_dss_device *dssdev,
u16 *xres, u16 *yres)
{
.run_test = taal_run_test,
.memory_read = taal_memory_read,
- .get_timings = taal_get_timings,
-
.driver = {
.name = "taal",
.owner = THIS_MODULE,
if (dssdriver->get_recommended_bpp == NULL)
dssdriver->get_recommended_bpp =
omapdss_default_get_recommended_bpp;
+ if (dssdriver->get_timings == NULL)
+ dssdriver->get_timings = omapdss_default_get_timings;
return driver_register(&dssdriver->driver);
}
}
EXPORT_SYMBOL(omapdss_default_get_recommended_bpp);
+void omapdss_default_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ *timings = dssdev->panel.timings;
+}
+EXPORT_SYMBOL(omapdss_default_get_timings);
+
/* Checks if replication logic should be used. Only use for active matrix,
* when overlay is in RGB12U or RGB16 mode, and LCD interface is
* 18bpp or 24bpp */
return venc_panel_enable(dssdev);
}
-static void venc_get_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings)
-{
- *timings = dssdev->panel.timings;
-}
-
static void venc_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
.get_resolution = omapdss_default_get_resolution,
.get_recommended_bpp = omapdss_default_get_recommended_bpp,
- .get_timings = venc_get_timings,
.set_timings = venc_set_timings,
.check_timings = venc_check_timings,
void omapdss_default_get_resolution(struct omap_dss_device *dssdev,
u16 *xres, u16 *yres);
int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev);
+void omapdss_default_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
typedef void (*omap_dispc_isr_t) (void *arg, u32 mask);
int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask);