FEATURES:=fpu usb pci pcie gpio nand squashfs ramdisk boot-part rootfs-part legacy-sdcard targz
SUBTARGETS:=cortexa9 cortexa53 cortexa72
-KERNEL_PATCHVER:=6.1
-KERNEL_TESTING_PATCHVER:=6.6
+KERNEL_PATCHVER:=6.6
include $(INCLUDE_DIR)/target.mk
+++ /dev/null
-CONFIG_AHCI_MVEBU=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARMADA_370_CLK=y
-CONFIG_ARMADA_370_XP_IRQ=y
-CONFIG_ARMADA_370_XP_TIMER=y
-# CONFIG_ARMADA_37XX_WATCHDOG is not set
-CONFIG_ARMADA_38X_CLK=y
-CONFIG_ARMADA_THERMAL=y
-CONFIG_ARMADA_XP_CLK=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set
-# CONFIG_ARM_ARMADA_8K_CPUFREQ is not set
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_GT_INITIAL_PRESCALER_VAL=1
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_MVEBU_V7_CPUIDLE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_ATA_LEDS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NVME=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_FEROCEON_L2 is not set
-CONFIG_CACHE_L2X0=y
-CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
-CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
-CONFIG_CC_NO_ARRAY_BOUNDS=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONTEXT_TRACKING=y
-CONFIG_CONTEXT_TRACKING_IDLE=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PJ4B=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AES_ARM=y
-CONFIG_CRYPTO_AES_ARM_BS=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_MARVELL=y
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRYPTO_ESSIV=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_LIB_SHA1=y
-CONFIG_CRYPTO_LIB_UTILS=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=y
-CONFIG_CRYPTO_SHA256_ARM=y
-CONFIG_CRYPTO_SHA512_ARM=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MVEBU_UART0=y
-# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set
-# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
-CONFIG_DEBUG_UART_8250=y
-CONFIG_DEBUG_UART_8250_SHIFT=2
-CONFIG_DEBUG_UART_PHYS=0xd0012000
-CONFIG_DEBUG_UART_VIRT=0xfec12000
-CONFIG_DEBUG_USER=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXCLUSIVE_SYSTEM_RAM=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_FW_LOADER_SYSFS=y
-CONFIG_GCC11_NO_ARRAY_BOUNDS=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GRO_CELLS=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWBM=y
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_PXA is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_IWMMXT is not set
-CONFIG_JBD2=y
-CONFIG_KMAP_LOCAL=y
-CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PCA963X=y
-CONFIG_LEDS_TLC591XX=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_ARMADA_370=y
-# CONFIG_MACH_ARMADA_375 is not set
-CONFIG_MACH_ARMADA_38X=y
-# CONFIG_MACH_ARMADA_39X is not set
-CONFIG_MACH_ARMADA_XP=y
-# CONFIG_MACH_DOVE is not set
-CONFIG_MACH_MVEBU_ANY=y
-CONFIG_MACH_MVEBU_V7=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MANGLE_BOOTARGS=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MDIO_I2C=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_MVSDIO=y
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_PXAV3=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_MARVELL=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_CLK_COREDIV=y
-CONFIG_MVEBU_CLK_CPU=y
-CONFIG_MVEBU_DEVBUS=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-CONFIG_MVNETA=y
-CONFIG_MVNETA_BM=y
-CONFIG_MVNETA_BM_ENABLE=y
-# CONFIG_MVPP2 is not set
-CONFIG_MV_XOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6XXX=y
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_DSA_COMMON=y
-CONFIG_NET_DSA_TAG_EDSA=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SELFTESTS=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_NVME_CORE=y
-# CONFIG_NVME_HWMON is not set
-# CONFIG_NVME_MULTIPATH is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_ORION_WATCHDOG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PAGE_POOL_STATS=y
-CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
-CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
-CONFIG_PCI=y
-CONFIG_PCI_BRIDGE_EMUL=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_MVEBU_A3700_COMPHY is not set
-# CONFIG_PHY_MVEBU_A3700_UTMI is not set
-# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
-# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_370=y
-CONFIG_PINCTRL_ARMADA_38X=y
-CONFIG_PINCTRL_ARMADA_XP=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PJ4B_ERRATA_4742=y
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_PLAT_ORION=y
-CONFIG_PM_OPP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_PREEMPT_NONE_BUILD=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_PWM=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RANDSTRUCT_NONE=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_ARMADA38X=y
-# CONFIG_RTC_DRV_MV is not set
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_HOST=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-CONFIG_SCSI_COMMON=y
-CONFIG_SENSORS_PWM_FAN=y
-CONFIG_SENSORS_TMP421=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_MVEBU_CONSOLE=y
-CONFIG_SERIAL_MVEBU_UART=y
-CONFIG_SFP=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOCK_RX_QUEUE_MAPPING=y
-CONFIG_SOC_BUS=y
-CONFIG_SOFTIRQ_ON_OWN_STACK=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-# CONFIG_SPI_ARMADA_3700 is not set
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_ORION=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_ORION=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_LEDS_TRIGGER_USBPORT=y
-CONFIG_USB_PHY=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MVEBU=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMMON=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
-CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_WANTS_NO_INSTR=y
-CONFIG_ARCH_WANTS_THP_SWAP=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARMADA_37XX_CLK=y
-CONFIG_ARMADA_37XX_RWTM_MBOX=y
-CONFIG_ARMADA_37XX_WATCHDOG=y
-CONFIG_ARMADA_AP806_SYSCON=y
-CONFIG_ARMADA_AP_CP_HELPER=y
-CONFIG_ARMADA_CP110_SYSCON=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-# CONFIG_ARM_ARCH_TIMER_EVTSTREAM is not set
-CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-# CONFIG_ARM_MHU_V2 is not set
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI_FW=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_IOREMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_MAILBOX=y
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MFD_SYSCON=y
-# CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY is not set
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MVEBU_GICP=y
-CONFIG_MVEBU_ICU=y
-CONFIG_MVEBU_ODMI=y
-CONFIG_MVEBU_PIC=y
-CONFIG_MVEBU_SEI=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI_AARDVARK=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_MVEBU_A3700_COMPHY=y
-CONFIG_PHY_MVEBU_A3700_UTMI=y
-CONFIG_PINCTRL_AC5=y
-CONFIG_PINCTRL_ARMADA_37XX=y
-CONFIG_PINCTRL_ARMADA_AP806=y
-CONFIG_PINCTRL_ARMADA_CP110=y
-CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPI_ARMADA_3700=y
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
-CONFIG_TURRIS_MOX_RWTM=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VMAP_STACK=y
-CONFIG_ZONE_DMA32=y
+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_AQUANTIA_PHY=y
-CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
-CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_WANTS_NO_INSTR=y
-CONFIG_ARCH_WANTS_THP_SWAP=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_SVE=y
-# CONFIG_ARM64_TAGGED_ADDR_ABI is not set
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARMADA_37XX_CLK=y
-CONFIG_ARMADA_AP806_SYSCON=y
-CONFIG_ARMADA_AP_CPU_CLK=y
-CONFIG_ARMADA_AP_CP_HELPER=y
-CONFIG_ARMADA_CP110_SYSCON=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-# CONFIG_ARM_ARCH_TIMER_EVTSTREAM is not set
-CONFIG_ARM_ARMADA_8K_CPUFREQ=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI_FW=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CRC_CCITT=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_EEPROM_AT24=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_IOREMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_HW_RANDOM_OMAP=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_LEDS_IEI_WT61P803_PUZZLE=y
-CONFIG_LEDS_IS31FL319X=y
-CONFIG_MARVELL_10G_PHY=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_IEI_WT61P803_PUZZLE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MVEBU_GICP=y
-CONFIG_MVEBU_ICU=y
-CONFIG_MVEBU_ODMI=y
-CONFIG_MVEBU_PIC=y
-CONFIG_MVEBU_SEI=y
-CONFIG_MVPP2=y
-CONFIG_MV_XOR_V2=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NVMEM_LAYOUTS=y
-CONFIG_NVMEM_LAYOUT_ONIE_TLV=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_ARMADA_8K=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_DW_HOST=y
-# CONFIG_PCI_AARDVARK is not set
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB_LEDS=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_MVEBU_CP110_COMPHY=y
-CONFIG_PHY_MVEBU_CP110_UTMI=y
-CONFIG_PINCTRL_AC5=y
-CONFIG_PINCTRL_ARMADA_37XX=y
-CONFIG_PINCTRL_ARMADA_AP806=y
-CONFIG_PINCTRL_ARMADA_CP110=y
-CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RAS=y
-# CONFIG_RAVE_SP_CORE is not set
-CONFIG_REGULATOR_GPIO=y
-# CONFIG_RODATA_FULL_DEFAULT_ENABLED is not set
-CONFIG_SENSORS_IEI_WT61P803_PUZZLE_HWMON=y
-CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VMAP_STACK=y
-CONFIG_ZONE_DMA32=y
+++ /dev/null
-CONFIG_ARM_HAS_GROUP_RELOCS=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CURRENT_POINTER_IN_TPIDRURO=y
-CONFIG_IRQSTACKS=y
-CONFIG_LED_TRIGGER_PHY=y
-CONFIG_MTD_SPLIT_SEIL_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_VIRT_CONCAT=y
-CONFIG_PHY_MVEBU_A38X_COMPHY=y
-CONFIG_POWER_RESET_QNAP=y
-CONFIG_RTC_DRV_MV=y
-CONFIG_THREAD_INFO_IN_TASK=y
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Buffalo LinkStation LS220DE
- *
- * Copyright (C) 2023 Daniel González Cabanelas <dgcbueu@gmail.com>
- */
-
-/dts-v1/;
-
-#include "armada-370.dtsi"
-#include "mvebu-linkstation-fan.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- model = "Buffalo LinkStation LS220DE";
- compatible = "buffalo,ls220de", "marvell,armada370", "marvell,armada-370-xp";
-
- aliases {
- led-boot = &led_boot;
- led-failsafe = &led_failsafe;
- led-running = &led_power;
- led-upgrade = &led_upgrade;
- };
-
- chosen {
- bootargs = "earlycon";
- stdout-path = "serial0:115200n8";
- append-rootblock = "nullparameter="; /* override the bootloader args */
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>; /* 256 MB */
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- };
-
- system_fan: gpio_fan {
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH
- &gpio0 14 GPIO_ACTIVE_HIGH>;
- alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-
- #cooling-cells = <2>;
- };
-
- thermal-zones {
- hdd-thermal {
- polling-delay = <20000>;
- polling-delay-passive = <2000>;
-
- thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */
-
- trips {
- hdd_alert1: trip1 {
- temperature = <34000>;
- hysteresis = <2000>;
- type = "active";
- };
- hdd_alert2: trip2 {
- temperature = <40000>;
- hysteresis = <2000>;
- type = "active";
- };
- hdd_alert3: trip3 {
- temperature = <45000>;
- hysteresis = <2000>;
- type = "passive";
- };
- hdd_hot {
- temperature = <50000>;
- hysteresis = <2000>;
- type = "hot";
- };
- hdd_crit {
- temperature = <60000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map1 {
- trip = <&hdd_alert1>;
- cooling-device = <&system_fan THERMAL_NO_LIMIT 1>;
- };
- map2 {
- trip = <&hdd_alert2>;
- cooling-device = <&system_fan 2 2>;
- };
- map3 {
- trip = <&hdd_alert3>;
- cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&pmx_buttons>;
- pinctrl-names = "default";
-
- power {
- label = "Power Switch";
- linux,code = <KEY_POWER>;
- linux,input-type = <EV_SW>;
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
- };
-
- function {
- label = "Function Button";
- linux,code = <KEY_CONFIG>;
- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
-
- indicator_red {
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- panic-indicator;
- };
-
- led_power: power_white {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- led_failsafe: power_red {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
- };
-
- led_upgrade: power_orange {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_AMBER>;
- gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
- };
-
- led_boot: indicator_white {
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
- };
-
- hdd1_red {
- function = LED_FUNCTION_DISK;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata1";
- function-enumerator = <1>;
- };
-
- hdd2_red {
- function = LED_FUNCTION_DISK;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata2";
- function-enumerator = <2>;
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_power_hdd1 &pmx_power_hdd2>;
- pinctrl-names = "default";
-
- sata1_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "HDD1";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- startup-delay-us = <2000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- };
-
- sata2_power: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "HDD2";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- startup-delay-us = <4000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&coherencyfab {
- broken-idle;
-};
-
-ð1 {
- pinctrl-0 = <&ge1_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-handle = <ðphy0>;
- phy-connection-type = "rgmii-id";
-};
-
-&mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-
- ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
- reg = <0>;
- marvell,reg-init = <0x3 0x10 0xf000 0x091A>, /* LED function */
- <0x3 0x11 0x0000 0x4401>, /* LED polarity */
- <0x3 0x12 0x0000 0x4905>; /* LED timer */
- #thermal-sensor-cells = <0>;
- };
-};
-
-&nand_controller {
- status = "okay";
-
- nand@0 {
- reg = <0>;
- label = "pxa3xx_nand-0";
- nand-rb = <0>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "ubi_kernel";
- reg = <0x00000000 0x02000000>; /* 32 MiB */
- };
-
- partition@2000000 {
- label = "ubi";
- reg = <0x02000000 0x1df00000>; /* 479 MiB */
- };
- };
- };
-};
-
-&sata {
- nr-ports = <2>;
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- hdd0_temp: sata-port@0 {
- reg = <0>;
- #thermal-sensor-cells = <0>;
- };
-
- hdd1_temp: sata-port@1 {
- reg = <1>;
- #thermal-sensor-cells = <0>;
- };
-};
-
-&spi0 {
- status = "okay";
- pinctrl-0 = <&spi0_pins2>;
- pinctrl-names = "default";
-
- spi-flash@0 {
- compatible = "mxicy,mx25l8005", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x00000 0xf0000>; /* 960 KiB*/
- label = "u-boot";
- read-only;
- };
- partition@f0000 {
- reg = <0xf0000 0x10000>; /* 64 KiB */
- label = "u-boot-env";
- };
- };
- };
-};
-
-&pmsu {
- pinctrl-0 = <&pmx_power_cpu>;
- pinctrl-names = "default";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&pinctrl {
- pmx_power_hdd2: pmx-power-hdd2 {
- marvell,pins = "mpp2";
- marvell,function = "gpio";
- };
-
- pmx_power_cpu: pmx-power-cpu {
- marvell,pins = "mpp4";
- marvell,function = "vdd";
- };
-
- pmx_power_hdd1: pmx-power-hdd1 {
- marvell,pins = "mpp8";
- marvell,function = "gpio";
- };
-
- pmx_fan_lock: pmx-fan-lock {
- marvell,pins = "mpp10";
- marvell,function = "gpio";
- };
-
- pmx_hdd_present: pmx-hdd-present {
- marvell,pins = "mpp11", "mpp12";
- marvell,function = "gpio";
- };
-
- pmx_fan_high: pmx-fan-high {
- marvell,pins = "mpp13";
- marvell,function = "gpio";
- };
-
- pmx_fan_low: pmx-fan-low {
- marvell,pins = "mpp14";
- marvell,function = "gpio";
- };
-
- pmx_buttons: pmx-buttons {
- marvell,pins = "mpp15", "mpp16";
- marvell,function = "gpio";
- };
-
- pmx_leds1: pmx-leds {
- marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61";
- marvell,function = "gpo";
- };
-
- pmx_leds2: pmx-leds {
- marvell,pins = "mpp55", "mpp57", "mpp62";
- marvell,function = "gpio";
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Buffalo LinkStation LS421DE
- *
- * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
- */
-
-/dts-v1/;
-
-#include "armada-370.dtsi"
-#include "mvebu-linkstation-fan.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- model = "Buffalo LinkStation LS421DE";
- compatible = "buffalo,ls421de", "marvell,armada370", "marvell,armada-370-xp";
-
- aliases {
- led-boot = &led_boot;
- led-failsafe = &led_failsafe;
- led-running = &led_power;
- led-upgrade = &led_upgrade;
- };
-
- chosen {
- bootargs = "earlycon";
- stdout-path = "serial0:115200n8";
- append-rootblock = "nullparameter="; /* override the bootloader args */
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>; /* 512 MB */
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- };
-
- system_fan: gpio_fan {
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH
- &gpio0 14 GPIO_ACTIVE_HIGH>;
- alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-
- #cooling-cells = <2>;
- };
-
- thermal-zones {
- hdd-thermal {
- polling-delay = <20000>;
- polling-delay-passive = <2000>;
-
- thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */
-
- trips {
- hdd_alert1: trip1 {
- temperature = <36000>;
- hysteresis = <2000>;
- type = "active";
- };
- hdd_alert2: trip2 {
- temperature = <44000>;
- hysteresis = <2000>;
- type = "active";
- };
- hdd_alert3: trip3 {
- temperature = <52000>;
- hysteresis = <2000>;
- type = "passive";
- };
- hdd_crit: trip4 {
- temperature = <60000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map1 {
- trip = <&hdd_alert1>;
- cooling-device = <&system_fan THERMAL_NO_LIMIT 1>;
- };
- map2 {
- trip = <&hdd_alert2>;
- cooling-device = <&system_fan 2 2>;
- };
- map3 {
- trip = <&hdd_alert3>;
- cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>;
- };
- };
- };
-
- ethphy-thermal {
- polling-delay = <20000>;
- polling-delay-passive = <2000>;
-
- thermal-sensors = <ðphy0>;
-
- trips {
- ethphy_alert1: trip1 {
- temperature = <65000>;
- hysteresis = <4000>;
- type = "passive";
- };
-
- ethphy_crit: trip2 {
- temperature = <100000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map1 {
- trip = <ðphy_alert1>;
- cooling-device = <&system_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
-
- };
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&pmx_buttons>;
- pinctrl-names = "default";
-
- power {
- label = "Power Switch";
- linux,code = <KEY_POWER>;
- linux,input-type = <EV_SW>;
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
- };
-
- function {
- label = "Function Button";
- linux,code = <KEY_CONFIG>;
- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
-
- system_red {
- label = "ls421de:red:system";
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- };
-
- led_power: power_white {
- label = "ls421de:white:power";
- gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- led_failsafe: power_red {
- label = "ls421de:red:power";
- gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
- };
-
- led_upgrade: power_orange {
- label = "ls421de:orange:power";
- gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
- };
-
- led_boot: system_white {
- label = "ls421de:white:system";
- gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
- };
-
- hdd1_red {
- label = "ls421de:red:hdd1";
- gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata1";
- };
-
- hdd2_red {
- label = "ls421de:red:hdd2";
- gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata2";
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>;
- pinctrl-names = "default";
-
- usb_power: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "USB";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
- };
-
- sata1_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "HDD1";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- startup-delay-us = <2000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- };
-
- sata2_power: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "HDD2";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- startup-delay-us = <4000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&coherencyfab {
- broken-idle;
-};
-
-ð1 {
- pinctrl-0 = <&ge1_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-handle = <ðphy0>;
- phy-connection-type = "rgmii-id";
-};
-
-&i2c0 {
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
- clock-frequency = <100000>;
- status = "okay";
-
- rs5c372a: rs5c372a@32 {
- compatible = "ricoh,rs5c372a";
- reg = <0x32>;
- wakeup-source;
- };
-};
-
-&mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-
- ethphy0: ethernet-phy@0 { /* Marvell 88E1518 */
- reg = <0>;
- marvell,reg-init = <0x2 0x10 0xffff 0x0006>, /* disable CLK125 */
- <0x3 0x10 0x0000 0x1991>, /* LED function */
- <0x3 0x11 0x0000 0x4401>, /* LED polarity */
- <0x3 0x12 0x0000 0x4905>; /* LED timer */
- #thermal-sensor-cells = <0>;
- };
-};
-
-&pciec {
- status = "okay";
- pinctrl-0 = <&pmx_pcie>;
- pinctrl-names = "default";
-
- /* Connected to uPD720202 USB 3.0 Host */
- pcie@1,0 {
- status = "okay";
- };
-};
-
-&pmsu {
- pinctrl-0 = <&pmx_power_cpu>;
- pinctrl-names = "default";
-};
-
-&rtc {
- status = "disabled";
-};
-
-&sata {
- nr-ports = <2>;
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- hdd0_temp: sata-port@0 {
- reg = <0>;
- #thermal-sensor-cells = <0>;
- };
-
- hdd1_temp: sata-port@1 {
- reg = <1>;
- #thermal-sensor-cells = <0>;
- };
-};
-
-&sdio {
- pinctrl-0 = <&sdio_pins2>;
- pinctrl-names = "default";
- status = "okay";
- /* No CD or WP GPIOs */
- broken-cd;
-};
-
-&uart0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&nand_controller {
- status = "okay";
-
- nand@0 {
- reg = <0>;
- label = "pxa3xx_nand-0";
- nand-rb = <0>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "kernel";
- reg = <0x00000000 0x02000000>; /* 32 MiB */
- };
-
- partition@2000000 {
- label = "ubi";
- reg = <0x02000000 0x1e000000>; /* 480 MiB */
- };
- };
- };
-};
-
-&spi0 {
- status = "okay";
- pinctrl-0 = <&spi0_pins2>;
- pinctrl-names = "default";
-
- spi-flash@0 {
- compatible = "mxicy,mx25l8005", "jedec,spi-nor";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <50000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x00000 0xf0000>; /* 960 KiB*/
- label = "u-boot";
- read-only;
- };
- partition@f0000 {
- reg = <0xf0000 0x10000>; /* 64 KiB */
- label = "u-boot-env";
- };
- };
- };
-};
-
-&pinctrl {
- pmx_power_cpu: pmx-power-cpu {
- marvell,pins = "mpp4";
- marvell,function = "vdd";
- };
-
- pmx_power_usb: pmx-power-usb {
- marvell,pins = "mpp5";
- marvell,function = "gpo";
- };
-
- pmx_power_hdd1: pmx-power-hdd1 {
- marvell,pins = "mpp8";
- marvell,function = "gpio";
- };
-
- pmx_power_hdd2: pmx-power-hdd2 {
- marvell,pins = "mpp9";
- marvell,function = "gpo";
- };
-
- pmx_fan_lock: pmx-fan-lock {
- marvell,pins = "mpp10";
- marvell,function = "gpio";
- };
-
- pmx_hdd_present: pmx-hdd-present {
- marvell,pins = "mpp11", "mpp12";
- marvell,function = "gpio";
- };
-
- pmx_fan_high: pmx-fan-high {
- marvell,pins = "mpp13";
- marvell,function = "gpio";
- };
-
- pmx_fan_low: pmx-fan-low {
- marvell,pins = "mpp14";
- marvell,function = "gpio";
- };
-
- pmx_buttons: pmx-buttons {
- marvell,pins = "mpp15", "mpp16";
- marvell,function = "gpio";
- };
-
- pmx_leds1: pmx-leds {
- marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61";
- marvell,function = "gpo";
- };
-
- pmx_leds2: pmx-leds {
- marvell,pins = "mpp55", "mpp57", "mpp62";
- marvell,function = "gpio";
- };
-
- pmx_pcie: pmx-pcie {
- marvell,pins = "mpp56", "mpp60";
- marvell,function = "pcie";
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Ctera C200-V2
- *
- * Copyright (C) 2021 Pawel Dembicki <paweldembicki@gmail.com>
- */
-
-/dts-v1/;
-
-#include "armada-370.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "Ctera C200 V2";
- compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
-
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_red;
- led-running = &led_status_green;
- led-upgrade = &led_status_red;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = "serial0:115200n8";
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x40000000>; /* 1024 MB */
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- };
-
- thermal-zones {
- ethphy-thermal {
- polling-delay = <20000>;
- polling-delay-passive = <2000>;
-
- thermal-sensors = <ðphy0>;
-
- trips {
- ethphy_alert1: trip1 {
- temperature = <65000>;
- hysteresis = <4000>;
- type = "passive";
- };
-
- ethphy_crit: trip2 {
- temperature = <100000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&pmx_buttons>;
- pinctrl-names = "default";
-
- power {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
- };
-
- reset {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- };
-
- usb1 {
- label = "USB1 Button";
- linux,code = <BTN_0>;
- gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
- };
-
- usb2 {
- label = "USB2 Button";
- linux,code = <BTN_1>;
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_poweroff>;
- pinctrl-names = "default";
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
- pinctrl-names = "default";
-
- led-0 {
- function = LED_FUNCTION_USB;
- function-enumerator = <2>;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- led-1 {
- function = LED_FUNCTION_USB;
- function-enumerator = <2>;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "usbport";
- trigger-sources = <&usb1_port 1>, <&usb2_port 1>;
- };
-
- led-2 {
- function = LED_FUNCTION_USB;
- function-enumerator = <1>;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
- };
-
- led-3 {
- function = LED_FUNCTION_USB;
- function-enumerator = <1>;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "usbport";
- trigger-sources = <&usb1_port 2>, <&usb2_port 2>;
- };
-
- led-4 {
- function = LED_FUNCTION_DISK;
- function-enumerator = <2>;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ata2";
- };
-
- led-5 {
- function = LED_FUNCTION_DISK;
- function-enumerator = <1>;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
- };
-
- led-6 {
- function = LED_FUNCTION_DISK;
- function-enumerator = <2>;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
- };
-
- led-7 {
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
- };
-
- led-8 {
- function = LED_FUNCTION_DISK_ERR;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
- };
-
- led-9 {
- function = LED_FUNCTION_DISK_ERR;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
- };
-
- led_status_red: led-10 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
- };
-
- led-11 {
- function = LED_FUNCTION_DISK;
- function-enumerator = <1>;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ata1";
- };
-
- led_status_green: led-12 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&coherencyfab {
- broken-idle;
-};
-
-ð1 {
- pinctrl-0 = <&ge1_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-handle = <ðphy0>;
- phy-connection-type = "rgmii-id";
-};
-
-&i2c0 {
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
- clock-frequency = <100000>;
- status = "okay";
-
- hwmon@2a {
- compatible = "nuvoton,nct7802";
- reg = <0x2a>;
- };
-
- rtc@30 {
- compatible = "sii,s35390a";
- reg = <0x30>;
- };
-};
-
-&mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-
- ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
- reg = <0>;
- #thermal-sensor-cells = <0>;
- };
-};
-
-&nand_controller {
- status = "okay";
-
- nand@0 {
- reg = <0>;
- label = "pxa3xx_nand-0";
- nand-rb = <0>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0000000 0x200000>;
- read-only;
- };
-
- partition@200000 {
- label = "certificate";
- reg = <0x0200000 0x100000>;
- read-only;
- };
-
- partition@300000 {
- label = "preset_cfg";
- reg = <0x0300000 0x100000>;
- read-only;
- };
-
- partition@400000 {
- label = "dev_params";
- reg = <0x0400000 0x100000>;
- read-only;
- };
- partition@500000 {
- label = "active_bank";
- reg = <0x0500000 0x0100000>;
- };
-
- partition@600000 {
- label = "magic";
- reg = <0x0600000 0x0100000>;
- read-only;
- };
-
- partition@700000 {
- label = "bank1";
- reg = <0x0700000 0x2800000>;
- };
-
- partition@2f00000 {
- label = "bank2";
- reg = <0x2f00000 0x2800000>;
- };
-
- /* 0x5700000-0x5a00000 undefined in vendor firmware */
-
- partition@5a00000 {
- label = "reserved";
- reg = <0x5a00000 0x2000000>;
- };
-
- partition@7a00000 {
- label = "ubi";
- reg = <0x7a00000 0x8600000>;
- };
- };
- };
-};
-
-&pciec {
- status = "okay";
-
- pcie@1,0 {
- pinctrl-0 = <&pmx_pcie>;
- pinctrl-names = "default";
- status = "okay";
- reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-
- /* -[0000:00]---01.0-[01]----00.0 */
- /* usbport trigger won't work */
- bridge@0,1 {
- compatible = "pci11ab,6710";
- reg = <0x3800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- usb@1,0 {
- /* Renesas uPD720202 */
- compatible = "pci1912,0015";
- reg = <0x1000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- usb1_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <1>;
- };
-
- usb2_port: port@2 {
- reg = <2>;
- #trigger-source-cells = <1>;
- };
- };
- };
- };
-};
-
-&pinctrl {
- pmx_poweroff: pmx-poweroff {
- marvell,pins = "mpp7";
- marvell,function = "gpo";
- };
-
- pmx_power_cpu: pmx-power-cpu {
- marvell,pins = "mpp4";
- marvell,function = "vdd";
- };
-
- pmx_buttons: pmx-buttons {
- marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
- marvell,function = "gpio";
- };
-
- pmx_leds1: pmx-leds1 {
- marvell,pins = "mpp47";
- marvell,function = "gpo";
- };
-
- pmx_leds2: pmx-leds2 {
- marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
- "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
- marvell,function = "gpio";
- };
-
- pmx_pcie: pmx-pcie {
- marvell,pins = "mpp59";
- marvell,function = "gpio";
- };
-
- /* this gpio is connected to the pin of buzzer
- * leave it as is due lack of proper driver
- */
- pmx_buzzer: pmx-buzzer {
- marvell,pins = "mpp63";
- marvell,function = "gpio";
- };
-};
-
-&pmsu {
- pinctrl-0 = <&pmx_power_cpu>;
- pinctrl-names = "default";
-};
-
-&rtc {
- status = "disabled";
-};
-
-&sata {
- nr-ports = <2>;
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- hdd0_temp: sata-port@0 {
- reg = <0>;
- #thermal-sensor-cells = <0>;
- };
-
- hdd1_temp: sata-port@1 {
- reg = <1>;
- #thermal-sensor-cells = <0>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "armada-380.dtsi"
-
-/ {
- model = "IIJ SA-W2";
- compatible = "iij,sa-w2", "marvell,armada380";
-
- aliases {
- led-boot = &led_power_green;
- led-failsafe = &led_power_red;
- led-running = &led_power_green;
- led-upgrade = &led_power_green;
- label-mac-device = &ge0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x10000000>; /* 256MB */
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
- MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
- pcie {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
-
- pcie@3,0 {
- status = "okay";
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_keys_pins>;
-
- button-init {
- label = "init";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_leds_pins>;
-
- led-0 {
- gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_WLAN_5GHZ;
- linux,default-trigger = "phy0tpt";
- };
-
- led-1 {
- gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_WLAN_5GHZ;
- };
-
- led-2 {
- gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_STATUS;
- };
-
- led-3 {
- gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_STATUS;
- };
-
- led-4 {
- gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_MOBILE;
- };
-
- led-5 {
- gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_MOBILE;
- };
-
- led-6 {
- gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_WLAN_2GHZ;
- linux,default-trigger = "phy1tpt";
- };
-
- led-7 {
- gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_WLAN_2GHZ;
- };
-
- led_power_green: led-8 {
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_POWER;
- };
-
- led_power_red: led-9 {
- gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_POWER;
- };
-
- led-10 {
- gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_USB;
- function-enumerator = <1>;
- linux,default-trigger = "usbport";
- trigger-sources = <&hub_port2>;
- };
-
- led-11 {
- gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_USB;
- function-enumerator = <0>;
- linux,default-trigger = "usbport";
- trigger-sources = <&hub_port1>;
- };
- };
-
- regulator-vbus-usb0 {
- compatible = "regulator-fixed";
- regulator-name = "vbus-usb0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-
- regulator-vbus-usb1 {
- compatible = "regulator-fixed";
- regulator-name = "vbus-usb1";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 21 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&pinctrl {
- pmx_usb_pins: usb-pins {
- marvell,pins = "mpp2", /* smsc usb2514b reset */
- "mpp48", "mpp49", /* port over current */
- "mpp52", "mpp53"; /* port vbus */
- marvell,function = "gpio";
- };
-
- pmx_keys_pins: keys-pins {
- marvell,pins = "mpp18";
- marvell,function = "gpio";
- };
-
- pmx_leds_pins: leds-pins {
- marvell,pins = "mpp19", "mpp20", "mpp33", "mpp34", "mpp35",
- "mpp36", "mpp44", "mpp45", "mpp46", "mpp47",
- "mpp54", "mpp55";
- marvell,function = "gpio";
- };
-};
-
-&gpio0 {
- usb-hub-reset {
- gpio-hog;
- gpios = <2 GPIO_ACTIVE_HIGH>;
- output-high;
- };
-};
-
-&usb0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_usb_pins>;
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* SMSC USB2514B on PCB */
- hub@1 {
- compatible = "usb424,2514";
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- hub_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
-};
-
-&bm {
- status = "okay";
-};
-
-&bm_bppi {
- status = "okay";
-};
-
-ð1 {
- pinctrl-names = "default";
- pinctrl-0 = <&ge1_rgmii_pins>;
- status = "okay";
-
- phy-connection-type = "rgmii-id";
- buffer-manager = <&bm>;
- bm,pool-long = <2>;
- bm,pool-short = <3>;
-
- nvmem-cells = <&macaddr_bdinfo_6 1>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&mdio {
- pinctrl-names = "default";
- pinctrl-0 = <&mdio_pins>;
- status = "okay";
-
- /* Marvell 88E6172 */
- switch@0 {
- compatible = "marvell,mv88e6085";
- reg = <0x0>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gpio1>;
- interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "ge1_0";
- };
-
- port@1 {
- reg = <1>;
- label = "ge1_1";
- };
-
- port@2 {
- reg = <2>;
- label = "ge1_2";
- };
-
- port@3 {
- reg = <3>;
- label = "ge1_3";
- };
-
- ge0: port@4 {
- reg = <4>;
- label = "ge0";
- nvmem-cells = <&macaddr_bdinfo_6 0>;
- nvmem-cell-names = "mac-address";
- };
-
- /*
- * eth0 is connected to port5 for WAN connection
- * on port4 ("GE0")
- */
-
- port@6 {
- reg = <6>;
- label = "cpu";
- ethernet = <ð1>;
- phy-connection-type = "rgmii-id";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
-};
-
-&rtc {
- status = "disabled";
-};
-
-&spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins>;
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x100000>;
- label = "bootloader";
- read-only;
- };
-
- partition@100000 {
- reg = <0x100000 0x10000>;
- label = "bootloader-env";
- read-only;
- };
-
- partition@110000 {
- reg = <0x110000 0xf0000>;
- label = "board_info";
- read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_bdinfo_6: macaddr@6 {
- compatible = "mac-base";
- reg = <0x6 0x6>;
- #nvmem-cell-cells = <1>;
- };
- };
- };
-
- partition@200000 {
- compatible = "iij,seil-firmware";
- reg = <0x200000 0xf00000>;
- label = "firmware";
- iij,bootdev-name = "flash";
- iij,seil-id = <0x5345494c 0x32303135>;
- };
-
- partition@1100000 {
- compatible = "iij,seil-firmware";
- reg = <0x1100000 0xf00000>;
- label = "rescue";
- iij,bootdev-name = "rescue";
- iij,seil-id = <0x5345494c 0x32303135>;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "armada-385-fortinet-fg-x0e.dtsi"
-
-/ {
- model = "Fortinet FortiGate 30E";
- compatible = "fortinet,fg-30e", "marvell,armada385", "marvell,armada380";
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x40000000>; /* 1GB */
- };
-};
-
-&gpio_leds {
- led-14 {
- gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_AMBER>;
- function = LED_FUNCTION_SPEED_WAN;
- linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
- };
-
- led-15 {
- gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_SPEED_WAN;
- linux,default-trigger = "mv88e6xxx-1:00:1Gbps";
- };
-};
-
-&pinctrl {
- pmx_switch_pins: switch-pins {
- marvell,pins = "mpp19";
- marvell,function = "gpio";
- };
-};
-
-&mdio {
- pinctrl-names = "default";
- pinctrl-0 = <&mdio_pins>, <&pmx_switch_pins>;
-
- /* Marvell 88E6176 */
- switch@2 {
- compatible = "marvell,mv88e6085";
- reg = <0x2>;
- reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "wan";
- nvmem-cells = <&macaddr_bdinfo_d880 1>;
- nvmem-cell-names = "mac-address";
- };
-
- port@1 {
- reg = <1>;
- label = "lan4";
- nvmem-cells = <&macaddr_bdinfo_d880 5>;
- nvmem-cell-names = "mac-address";
- };
-
- port@2 {
- reg = <2>;
- label = "lan3";
- nvmem-cells = <&macaddr_bdinfo_d880 4>;
- nvmem-cell-names = "mac-address";
- };
-
- port@3 {
- reg = <3>;
- label = "lan2";
- nvmem-cells = <&macaddr_bdinfo_d880 3>;
- nvmem-cell-names = "mac-address";
- };
-
- port@4 {
- reg = <4>;
- label = "lan1";
- nvmem-cells = <&macaddr_bdinfo_d880 2>;
- nvmem-cell-names = "mac-address";
- };
-
- port@6 {
- reg = <6>;
- ethernet = <ð0>;
- phy-connection-type = "rgmii-id";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "armada-385-fortinet-fg-x0e.dtsi"
-
-/ {
- model = "Fortinet FortiGate 50E";
- compatible = "fortinet,fg-50e", "marvell,armada385", "marvell,armada380";
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x80000000>; /* 2GB */
- };
-};
-
-&gpio_leds {
- led-14 {
- gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_SPEED_WAN;
- function-enumerator = <1>;
- linux,default-trigger = "f1072004.mdio-mii:00:1Gbps";
- };
-
- led-15 {
- gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_SPEED_WAN;
- function-enumerator = <2>;
- linux,default-trigger = "f1072004.mdio-mii:01:1Gbps";
- };
-
- led-16 {
- gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_AMBER>;
- function = LED_FUNCTION_SPEED_LAN;
- function-enumerator = <5>;
- linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
- };
-
- led-17 {
- gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_SPEED_LAN;
- function-enumerator = <5>;
- linux,default-trigger = "mv88e6xxx-1:00:1Gbps";
- };
-};
-
-&pinctrl {
- pmx_phy_switch_pins: phy-switch-pins {
- marvell,pins = "mpp19", "mpp20", "mpp23", "mpp34", "mpp41";
- marvell,function = "gpio";
- };
-};
-
-ð1 {
- status = "okay";
-
- phy-handle = <ðphy0>;
- phy-connection-type = "sgmii";
- buffer-manager = <&bm>;
- bm,pool-long = <2>;
- nvmem-cells = <&macaddr_bdinfo_d880 1>;
- nvmem-cell-names = "mac-address";
-};
-
-ð2 {
- status = "okay";
-
- phy-handle = <ðphy1>;
- phy-connection-type = "sgmii";
- buffer-manager = <&bm>;
- bm,pool-long = <3>;
- nvmem-cells = <&macaddr_bdinfo_d880 2>;
- nvmem-cell-names = "mac-address";
-};
-
-&mdio {
- pinctrl-names = "default";
- pinctrl-0 = <&mdio_pins>, <&pmx_phy_switch_pins>;
-
- /* Marvell 88E1512 */
- ethphy0: ethernet-phy@0 {
- compatible = "ethernet-phy-id0141,0dd1",
- "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- interrupt-parent = <&gpio0>;
- interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
- reset-assert-us = <10000>;
- reset-deassert-us = <10000>;
- /*
- * LINK/ACT (Green): LED[0], Active Low
- * SPEED 100M (Amber): LED[1], Active High
- */
- marvell,reg-init = <3 16 0 0x71>,
- <3 17 0 0x4>;
- };
-
- /* Marvell 88E1512 */
- ethphy1: ethernet-phy@1 {
- compatible = "ethernet-phy-id0141,0dd1",
- "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- interrupt-parent = <&gpio1>;
- interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
- reset-assert-us = <10000>;
- reset-deassert-us = <10000>;
- /*
- * LINK/ACT (Green): LED[0], Active Low
- * SPEED 100M (Amber): LED[1], Active High
- */
- marvell,reg-init = <3 16 0 0x71>,
- <3 17 0 0x4>;
- };
-
- /* Marvell 88E6176 */
- switch@2 {
- compatible = "marvell,mv88e6085";
- reg = <0x2>;
- reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "lan5";
- nvmem-cells = <&macaddr_bdinfo_d880 7>;
- nvmem-cell-names = "mac-address";
- };
-
- port@1 {
- reg = <1>;
- label = "lan4";
- nvmem-cells = <&macaddr_bdinfo_d880 6>;
- nvmem-cell-names = "mac-address";
- };
-
- port@2 {
- reg = <2>;
- label = "lan3";
- nvmem-cells = <&macaddr_bdinfo_d880 5>;
- nvmem-cell-names = "mac-address";
- };
-
- port@3 {
- reg = <3>;
- label = "lan2";
- nvmem-cells = <&macaddr_bdinfo_d880 4>;
- nvmem-cell-names = "mac-address";
- };
-
- port@4 {
- reg = <4>;
- label = "lan1";
- nvmem-cells = <&macaddr_bdinfo_d880 3>;
- nvmem-cell-names = "mac-address";
- };
-
- port@6 {
- reg = <6>;
- ethernet = <ð0>;
- phy-connection-type = "rgmii-id";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "armada-385.dtsi"
-
-/ {
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_red;
- led-running = &led_status_green;
- led-upgrade = &led_status_green;
- label-mac-device = ð0;
- };
-
- chosen {
- stdout-path = "serial0:9600n8";
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
- MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_gpio_keys_pins>;
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_leds: gpio-leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_gpio_leds_pins>;
-
- led-0 {
- gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_ALARM;
- };
-
- led-1 {
- gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_RED>;
- function = "ha";
- };
-
- led_status_green: led-2 {
- gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_STATUS;
- };
-
- led-3 {
- gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- function = "ha";
- };
-
- led-4 {
- gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_AMBER>;
- function = LED_FUNCTION_ALARM;
- };
-
- led_status_red: led-5 {
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_STATUS;
- };
-
- led-6 {
- gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_SPEED_LAN;
- function-enumerator = <4>;
- linux,default-trigger = "mv88e6xxx-1:01:1Gbps";
- };
-
- led-7 {
- gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_AMBER>;
- function = LED_FUNCTION_SPEED_LAN;
- function-enumerator = <4>;
- linux,default-trigger = "mv88e6xxx-1:01:100Mbps";
- };
-
- led-8 {
- gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_AMBER>;
- function = LED_FUNCTION_SPEED_LAN;
- function-enumerator = <3>;
- linux,default-trigger = "mv88e6xxx-1:02:100Mbps";
- };
-
- led-9 {
- gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_SPEED_LAN;
- function-enumerator = <3>;
- linux,default-trigger = "mv88e6xxx-1:02:1Gbps";
- };
-
- led-10 {
- gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_SPEED_LAN;
- function-enumerator = <1>;
- linux,default-trigger = "mv88e6xxx-1:04:1Gbps";
- };
-
- led-11 {
- gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_AMBER>;
- function = LED_FUNCTION_SPEED_LAN;
- function-enumerator = <1>;
- linux,default-trigger = "mv88e6xxx-1:04:100Mbps";
- };
-
- led-12 {
- gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_SPEED_LAN;
- function-enumerator = <2>;
- linux,default-trigger = "mv88e6xxx-1:03:1Gbps";
- };
-
- led-13 {
- gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_AMBER>;
- function = LED_FUNCTION_SPEED_LAN;
- function-enumerator = <2>;
- linux,default-trigger = "mv88e6xxx-1:03:100Mbps";
- };
- };
-
- reg_usb_vbus: regulator-usb-vbus {
- compatible = "fixed-regulator";
- regulator-name = "usb-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 21 GPIO_ACTIVE_LOW>;
- regulator-always-on;
- };
-};
-
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "okay";
-
- gpio2: gpio@24 {
- compatible = "nxp,pca9555";
- reg = <0x24>;
- gpio-controller;
- #gpio-cells = <0x2>;
- };
-
- hwmon@28 {
- compatible = "nuvoton,nct7802";
- reg = <0x28>;
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&pinctrl {
- pmx_gpio_leds_pins: gpio-leds-pins {
- marvell,pins = "mpp30", "mpp32", "mpp33", "mpp35",
- "mpp45", "mpp47";
- marvell,function = "gpio";
- };
-
- pmx_usb_pins: usb-pins {
- marvell,pins = "mpp53";
- marvell,function = "gpio";
- };
-
- pmx_gpio_keys_pins: gpio-keys-pins {
- marvell,pins = "mpp54";
- marvell,function = "gpio";
- };
-};
-
-&bm {
- status = "okay";
-};
-
-&bm_bppi {
- status = "okay";
-};
-
-ð0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ge0_rgmii_pins>;
- status = "okay";
-
- phy-connection-type = "rgmii-id";
- buffer-manager = <&bm>;
- bm,pool-long = <0>;
- bm,pool-short = <1>;
- nvmem-cells = <&macaddr_bdinfo_d880 0>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&usb3_0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_usb_pins>;
- status = "okay";
-
- vbus-supply = <®_usb_vbus>;
-};
-
-&spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins>;
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x1c0000>;
- label = "u-boot";
- read-only;
- };
-
- partition@1c0000 {
- reg = <0x1c0000 0x10000>;
- label = "firmware-info";
-
- /*
- * 0x10 - 0x2f : image name (image1)
- * 0x30 - 0x4f : image name (image2)
- * 0x170 (1byte): active image (0x0/0x1)
- * 0x184 - 0x185: kernel block count (image1)
- * 0x18c - 0x18d: rootfs block count (image1)
- * 0x194 - 0x195: kernel block count (image2)
- * 0x19c - 0x19d: rootfs block count (image2)
- * 0x1be (1byte): bit7 -> active flag (image1)?
- * 0x1ce (1byte): bit7 -> active flag (image2)?
- *
- * Note: block size --> 0x200 (512 bytes)
- */
- };
-
- partition@1d0000 {
- reg = <0x1d0000 0x10000>;
- label = "dtb";
- read-only;
- };
-
- partition@1e0000 {
- reg = <0x1e0000 0x10000>;
- label = "u-boot-env";
- read-only;
- };
-
- partition@1f0000 {
- reg = <0x1f0000 0x10000>;
- label = "board-info";
- read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_bdinfo_d880: macaddr@d880 {
- compatible = "mac-base";
- reg = <0xd880 0x6>;
- #nvmem-cell-cells = <1>;
- };
- };
- };
-
- partition@200000 {
- reg = <0x200000 0x600000>;
- label = "kernel";
- };
-
- partition@800000 {
- reg = <0x800000 0x1800000>;
- label = "rootfs";
- };
-
- partition@2000000 {
- reg = <0x2000000 0x600000>;
- label = "kn2";
- read-only;
- };
-
- partition@2600000 {
- reg = <0x2600000 0x1800000>;
- label = "rfs2";
- read-only;
- };
-
- partition@3e00000 {
- reg = <0x3e00000 0x1200000>;
- label = "part1";
- read-only;
- };
-
- partition@5000000 {
- reg = <0x5000000 0x1200000>;
- label = "part2";
- read-only;
- };
-
- partition@6200000 {
- reg = <0x6200000 0x1e00000>;
- label = "config";
- read-only;
- };
- };
- };
-};
+++ /dev/null
-/*
- * Device Tree file for the Linksys WRT32X (Venom)
- *
- * Copyright (C) 2017 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-385-linksys.dtsi"
-
-/ {
- model = "Linksys WRT32X";
- compatible = "linksys,wrt32x", "linksys,venom", "linksys,armada385",
- "marvell,armada385", "marvell,armada380";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = "serial0:115200n8";
- append-rootblock = "root=/dev/mtdblock";
- };
-};
-
-&expander0 {
- wan_amber@0 {
- label = "venom:amber:wan";
- reg = <0x0>;
- };
-
- wan_blue@1 {
- label = "venom:blue:wan";
- reg = <0x1>;
- };
-
- usb2@5 {
- label = "venom:blue:usb2";
- reg = <0x5>;
- };
-
- usb3_1@6 {
- label = "venom:blue:usb3_1";
- reg = <0x6>;
- };
-
- usb3_2@7 {
- label = "venom:blue:usb3_2";
- reg = <0x7>;
- };
-
- wps_blue@8 {
- label = "venom:blue:wps";
- reg = <0x8>;
- };
-
- wps_amber@9 {
- label = "venom:amber:wps";
- reg = <0x9>;
- };
-};
-
-&gpio_leds {
- power {
- gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
- label = "venom:blue:power";
- };
-
- sata {
- gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
- label = "venom:blue:sata";
- };
-
- wlan_2g {
- gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- label = "venom:blue:wlan_2g";
- };
-
- wlan_5g {
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- label = "venom:blue:wlan_5g";
- };
-};
-
-&gpio_leds_pins {
- marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
-};
-
-&nand {
- /* Spansion S34ML02G2 256MiB, OEM Layout */
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x200000>; /* 2MB */
- read-only;
- };
-
- partition@200000 {
- label = "u_env";
- reg = <0x200000 0x20000>; /* 128KB */
- };
-
- partition@220000 {
- label = "s_env";
- reg = <0x220000 0x40000>; /* 256KB */
- };
-
- partition@180000 {
- label = "unused_area";
- reg = <0x260000 0x5c0000>; /* 5.75MB */
- };
-
- partition@7e0000 {
- label = "devinfo";
- reg = <0x7e0000 0x40000>; /* 256KB */
- read-only;
- };
-
- /* kernel1 overlaps with rootfs1 by design */
- partition@900000 {
- label = "kernel1";
- reg = <0x900000 0x7b00000>; /* 123MB */
- };
-
- partition@f00000 {
- label = "rootfs1";
- reg = <0xf00000 0x7500000>; /* 117MB */
- };
-
- /* kernel2 overlaps with rootfs2 by design */
- partition@8400000 {
- label = "kernel2";
- reg = <0x8400000 0x7b00000>; /* 123MB */
- };
-
- partition@8a00000 {
- label = "rootfs2";
- reg = <0x8a00000 0x7500000>; /* 117MB */
- };
-
- /* last MB is for the BBT, not writable */
- partition@ff00000 {
- label = "BBT";
- reg = <0xff00000 0x100000>;
- };
- };
-};
-
-
-&pcie1 {
- mwlwifi {
- marvell,chainmask = <4 4>;
- };
-};
-
-&pcie2 {
- mwlwifi {
- marvell,chainmask = <4 4>;
- };
-};
-
-&sdhci {
- pinctrl-names = "default";
- pinctrl-0 = <&sdhci_pins>;
- no-1-8-v;
- non-removable;
- wp-inverted;
- bus-width = <8>;
- status = "okay";
-};
-
-&usb3_1_vbus {
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_1_vbus_pins {
- marvell,pins = "mpp44";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
-/*
- * Device Tree file for ipTIME NAS1dual
- *
- * Copyright (C) 2020 Sungbo Eo <mans0n@gorani.run>
- *
- * Based on armada-385-linksys.dtsi
- * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "armada-385.dtsi"
-
-/ {
- model = "ipTIME NAS1dual";
- compatible = "iptime,nas1dual", "marvell,armada385", "marvell,armada380";
-
- aliases {
- led-boot = &led_ready;
- led-failsafe = &led_ready;
- led-running = &led_ready;
- led-upgrade = &led_ready;
- label-mac-device = ð0;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8";
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x80000000>; /* 2GB */
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
- MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pins>;
-
- power {
- label = "Power Button";
- linux,input-type = <EV_SW>;
- linux,code = <KEY_POWER>;
- gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
- };
-
- copy {
- label = "USB Copy Button";
- linux,code = <KEY_COPY>;
- gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_leds_pins>;
-
- led_ready: ready {
- label = "blue:ready";
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- };
-
- hdd {
- label = "blue:hdd";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "disk-activity";
- };
-
- usb {
- function = LED_FUNCTION_USB;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&usb3_0_port1 &usb3_0_port2>;
- linux,default-trigger = "usbport";
- };
- };
-
- gpio-fan {
- compatible = "gpio-fan";
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_fan_pins>;
- gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>,
- <&gpio1 18 GPIO_ACTIVE_HIGH>;
- /* We don't know the exact rpm, just use dummy values here. */
- gpio-fan,speed-map = <0 0>, <1 1>, <2 2>;
- #cooling-cells = <2>;
- };
-
- gpio-poweroff {
- compatible = "gpio-poweroff";
- gpios = <&pca9536 1 GPIO_ACTIVE_LOW>;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&sata_power_pins>;
-
- reg_sata_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "sata-power";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
- regulator-always-on;
- };
- };
-};
-
-&ahci0 {
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sata-port@0 {
- reg = <0>;
- target-supply = <®_sata_power>;
- #thermal-sensor-cells = <0>;
- };
-};
-
-&bm {
- status = "okay";
-};
-
-&bm_bppi {
- status = "okay";
-};
-
-ð0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ge0_rgmii_pins>;
- status = "okay";
- phy-handle = <ðphy1>;
- phy-connection-type = "rgmii-id";
- buffer-manager = <&bm>;
- bm,pool-long = <0>;
- bm,pool-short = <1>;
- nvmem-cells = <&macaddr_uboot_fffa8>;
- nvmem-cell-names = "mac-address";
-};
-
-ð1 {
- pinctrl-names = "default";
- pinctrl-0 = <&ge1_rgmii_pins>;
- status = "okay";
- phy-handle = <ðphy0>;
- phy-connection-type = "rgmii-id";
- buffer-manager = <&bm>;
- bm,pool-long = <2>;
- bm,pool-short = <3>;
- nvmem-cells = <&macaddr_uboot_fffa8>;
- nvmem-cell-names = "mac-address";
-};
-
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "okay";
-
- pca9536: gpio@41 {
- compatible = "nxp,pca9536";
- reg = <0x41>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names = "power-led", "power-board";
- };
-};
-
-&mdio {
- pinctrl-names = "default";
- pinctrl-0 = <&mdio_pins>;
-
- /* LED1: On - Link, Blink - Activity, Off - No Link */
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- marvell,reg-init = <3 16 0 0x1017>;
- };
-
- ethphy1: ethernet-phy@1 {
- reg = <1>;
- marvell,reg-init = <3 16 0 0x1017>;
- };
-};
-
-&pinctrl {
- gpio_keys_pins: gpio-keys-pins {
- marvell,pins = "mpp24", "mpp26", "mpp48";
- marvell,function = "gpio";
- };
-
- gpio_leds_pins: gpio-leds-pins {
- marvell,pins = "mpp18", "mpp20", "mpp51";
- marvell,function = "gpio";
- };
-
- gpio_fan_pins: gpio-fan-pins {
- marvell,pins = "mpp25", "mpp50";
- marvell,function = "gpio";
- };
-
- sata_power_pins: sata-power-pins {
- marvell,pins = "mpp52";
- marvell,function = "gpio";
- };
-
- uart1_pins_alt: uart-pins-1-alt {
- marvell,pins = "mpp45", "mpp46";
- marvell,function = "ua1";
- };
-};
-
-&spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins>;
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x00000000 0x00100000>;
- label = "u-boot";
- read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_uboot_fffa8: macaddr@fffa8 {
- reg = <0xfffa8 0x6>;
- };
- };
- };
-
- partition@100000 {
- reg = <0x00100000 0x03ec0000>;
- label = "firmware";
-
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x00000000 0x00600000>;
- label = "kernel";
- };
-
- partition@600000 {
- reg = <0x00600000 0x038c0000>;
- label = "rootfs";
- };
- };
-
- partition@3fc0000 {
- reg = <0x03fc0000 0x00040000>;
- label = "config";
- read-only;
- };
- };
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_alt>;
- status = "okay";
-};
-
-&usb3_0 {
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb3_0_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- usb3_0_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-
-#include "armada-3720-uDPU.dtsi"
-
-/ {
- model = "Methode eDPU Board";
- compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
-};
-
-/* PHY mode is set to 1000Base-X despite Maxlinear IC being capable of
- * 2500Base-X since until 5.15 support for mvebu is available trying to
- * use 2500Base-X will cause buffer overruns for which the fix is not
- * easily backportable.
- */
-ð0 {
- phy-mode = "1000base-x";
-};
-
-/*
- * External MV88E6361 switch is only available on v2 of the board.
- * U-Boot will enable the MDIO bus and switch nodes.
- */
-&mdio {
- status = "disabled";
- pinctrl-names = "default";
- pinctrl-0 = <&smi_pins>;
-
- /* Actual device is MV88E6361 */
- switch: switch@0 {
- compatible = "marvell,mv88e6190";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "cpu";
- phy-mode = "2500base-x";
- managed = "in-band-status";
- ethernet = <ð0>;
- };
-
- port@9 {
- reg = <9>;
- label = "downlink";
- phy-mode = "2500base-x";
- managed = "in-band-status";
- };
-
- port@a {
- reg = <10>;
- label = "uplink";
- phy-mode = "2500base-x";
- managed = "in-band-status";
- sfp = <&sfp_eth1>;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for ESPRESSObin-Ultra
- * Copyright (C) 2019 Globalscale technologies, Inc.
- *
- * Jason Hung <jhung@globalscaletechnologies.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-372x.dtsi"
-
-/ {
- model = "Globalscale Marvell ESPRESSOBin Ultra Board";
- compatible = "globalscale,espressobin-ultra", "marvell,armada3720",
- "marvell,armada3710";
-
- aliases {
- /* for dsa slave device */
- ethernet1 = &switch0port1;
- ethernet2 = &switch0port2;
- ethernet3 = &switch0port3;
- ethernet4 = &switch0port4;
- ethernet5 = &switch0port5;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
- };
-
- reg_usb3_vbus: usb3-vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb3-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>;
- };
-
- usb3_phy: usb3-phy {
- compatible = "usb-nop-xceiv";
- vcc-supply = <®_usb3_vbus>;
- };
-
- leds {
- pinctrl-names = "default";
- compatible = "gpio-leds";
- /* No assigned functions to the LEDs by default */
- led1 {
- label = "ebin-ultra:blue:led1";
- gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
- };
- led2 {
- label = "ebin-ultra:green:led2";
- gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
- };
- led3 {
- label = "ebin-ultra:red:led3";
- gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
- };
- led4 {
- label = "ebin-ultra:yellow:led4";
- gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&sata {
- status = "okay";
-};
-
-&sdhci0 {
- status = "okay";
- non-removable;
- bus-width = <8>;
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
- marvell,pad-type = "fixed-1-8v";
-};
-
-&spi0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&spi_quad_pins>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <108000000>;
- spi-rx-bus-width = <4>;
- spi-tx-bus-width = <4>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "firmware";
- reg = <0x0 0x3e0000>;
- };
- partition@3e0000 {
- label = "hw-info";
- reg = <0x3e0000 0x10000>;
- read-only;
- };
- partition@3f0000 {
- label = "u-boot-env";
- reg = <0x3f0000 0x10000>;
- };
- };
- };
-};
-
-&uart0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
-};
-
-&i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-
- clock-frequency = <100000>;
-
- rtc@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
-};
-
-&usb3 {
- status = "okay";
- usb-phy = <&usb3_phy>;
-};
-
-&usb2 {
- status = "okay";
-};
-
-ð0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii-id";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&mdio {
- status = "okay";
-
- extphy: ethernet-phy@0 {
- reg = <1>;
- };
-
- switch0: switch0@1 {
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- dsa,member = <0 0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch0port0: port@0 {
- reg = <0>;
- ethernet = <ð0>;
- };
-
- switch0port1: port@1 {
- reg = <1>;
- label = "lan0";
- phy-handle = <&switch0phy1>;
- };
-
- switch0port2: port@2 {
- reg = <2>;
- label = "lan1";
- phy-handle = <&switch0phy2>;
- };
-
- switch0port3: port@3 {
- reg = <3>;
- label = "lan2";
- phy-handle = <&switch0phy3>;
- };
-
- switch0port4: port@4 {
- reg = <4>;
- label = "lan3";
- phy-handle = <&switch0phy4>;
- };
-
- switch0port5: port@5 {
- reg = <5>;
- label = "wan";
- phy-handle = <&extphy>;
- phy-mode = "sgmii";
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch0phy1: switch0phy1@11 {
- reg = <0x11>;
- };
- switch0phy2: switch0phy2@12 {
- reg = <0x12>;
- };
- switch0phy3: switch0phy3@13 {
- reg = <0x13>;
- };
- switch0phy4: switch0phy4@14 {
- reg = <0x14>;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "armada-372x.dtsi"
-
-/ {
- model = "GL.iNet GL-MV1000";
- compatible = "glinet,gl-mv1000", "marvell,armada3720";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
- };
-
- vcc_sd_reg1: regulator {
- compatible = "regulator-gpio";
- regulator-name = "vcc_sd1";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
-
- gpios-states = <0>;
- states = <1800000 0x1
- 3300000 0x0>;
- enable-active-high;
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
- };
-
- switch {
- label = "switch";
- linux,code = <BTN_0>;
- gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- vpn {
- label = "green:vpn";
- gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- function = LED_FUNCTION_WAN;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- m25p,fast-read;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0 0xf0000>;
- read-only;
- };
-
- partition@f0000 {
- label = "u-boot-env";
- reg = <0xf0000 0x8000>;
- read-only;
- };
-
- factory: partition@f8000 {
- label = "factory";
- reg = <0xf8000 0x8000>;
- read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_factory_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_factory_6: macaddr@6 {
- reg = <0x6 0x6>;
- };
- };
- };
-
- partition@100000 {
- label = "gl-firmware-dtb";
- reg = <0x100000 0x10000>;
- read-only;
- };
-
- partition@110000 {
- label = "gl-firmware";
- reg = <0x110000 0xef0000>;
- read-only;
- };
-
- partition@ef0000 {
- label = "gl-firmware-jffs2";
- reg = <0xef0000 0x110000>;
- read-only;
- };
- };
- };
-};
-
-&sdhci1 {
- wp-inverted;
- bus-width = <4>;
- cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
- marvell,pad-type = "sd";
- no-1-8-v;
- vqmmc-supply = <&vcc_sd_reg1>;
- status = "okay";
-};
-
-&sdhci0 {
- bus-width = <8>;
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
- non-removable;
- no-sd;
- no-sdio;
- marvell,pad-type = "fixed-1-8v";
- status = "okay";
-};
-
-&usb3 {
- status = "okay";
-};
-
-&usb2 {
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&mdio {
- switch0: switch0@1 {
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- dsa,member = <0 0>;
-
- ports: ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- ethernet = <ð0>;
- };
-
- port@1 {
- reg = <1>;
- label = "wan";
- phy-handle = <&switch0phy0>;
- };
-
- port@2 {
- reg = <2>;
- label = "lan0";
- phy-handle = <&switch0phy1>;
-
- nvmem-cells = <&macaddr_factory_6>;
- nvmem-cell-names = "mac-address";
- };
-
- port@3 {
- reg = <3>;
- label = "lan1";
- phy-handle = <&switch0phy2>;
-
- nvmem-cells = <&macaddr_factory_6>;
- nvmem-cell-names = "mac-address";
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch0phy0: switch0phy0@11 {
- reg = <0x11>;
- };
- switch0phy1: switch0phy1@12 {
- reg = <0x12>;
- };
- switch0phy2: switch0phy2@13 {
- reg = <0x13>;
- };
- };
- };
-};
-
-ð0 {
- nvmem-cells = <&macaddr_factory_0>;
- nvmem-cell-names = "mac-address";
- phy-mode = "rgmii-id";
- status = "okay";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-
-#include "armada-3720-uDPU.dtsi"
-
-/ {
- model = "Methode uDPU Board";
- compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710";
-
- sfp_eth0: sfp-eth0 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c0>;
- los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
- maximum-power-milliwatt = <3000>;
- };
-};
-
-&pinctrl_nb {
- i2c1_recovery_pins: i2c1-recovery-pins {
- groups = "i2c1";
- function = "gpio";
- };
-};
-
-&i2c0 {
- status = "okay";
- pinctrl-names = "default", "recovery";
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-1 = <&i2c1_recovery_pins>;
- /delete-property/mrvl,i2c-fast-mode;
- scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-ð0 {
- phy-mode = "2500base-x";
- sfp = <&sfp_eth0>;
-};
-
-ð1 {
- phy-mode = "2500base-x";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device tree for the uDPU board.
- * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
- * Copyright (C) 2016 Marvell
- * Copyright (C) 2019 Methode Electronics
- * Copyright (C) 2019 Telus
- *
- * Vladimir Vid <vladimir.vid@sartura.hr>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-372x.dtsi"
-
-/ {
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
- };
-
- aliases {
- ethernet0 = ð0;
- ethernet1 = ð1;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-power1 {
- label = "udpu:green:power";
- gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
- };
-
- led-power2 {
- label = "udpu:red:power";
- gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
- };
-
- led-network1 {
- label = "udpu:green:network";
- gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
- };
-
- led-network2 {
- label = "udpu:red:network";
- gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
- };
-
- led-alarm1 {
- label = "udpu:green:alarm";
- gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
- };
-
- led-alarm2 {
- label = "udpu:red:alarm";
- gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- sfp_eth1: sfp-eth1 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c1>;
- los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
- maximum-power-milliwatt = <3000>;
- };
-};
-
-&sdhci0 {
- status = "okay";
- bus-width = <8>;
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
- marvell,pad-type = "fixed-1-8v";
- non-removable;
- no-sd;
- no-sdio;
-};
-
-&spi0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&spi_quad_pins>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <54000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "firmware";
- reg = <0x0 0x180000>;
- };
-
- partition@180000 {
- label = "u-boot-env";
- reg = <0x180000 0x10000>;
- };
- };
- };
-};
-
-&pinctrl_nb {
- i2c2_recovery_pins: i2c2-recovery-pins {
- groups = "i2c2";
- function = "gpio";
- };
-};
-
-&i2c1 {
- status = "okay";
- pinctrl-names = "default", "recovery";
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-1 = <&i2c2_recovery_pins>;
- /delete-property/mrvl,i2c-fast-mode;
- scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
- temp-sensor@48 {
- compatible = "ti,tmp75c";
- reg = <0x48>;
- };
-
- temp-sensor@49 {
- compatible = "ti,tmp75c";
- reg = <0x49>;
- };
-};
-
-ð0 {
- status = "okay";
- managed = "in-band-status";
- phys = <&comphy1 0>;
-};
-
-ð1 {
- phy-mode = "sgmii";
- status = "okay";
- managed = "in-band-status";
- phys = <&comphy0 1>;
- sfp = <&sfp_eth1>;
-};
-
-&usb3 {
- status = "okay";
- phys = <&usb2_utmi_otg_phy>;
- phy-names = "usb2-utmi-otg-phy";
-};
-
-&uart0 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Device Tree file for Globalscale MOCHAbin
- * Copyright (C) 2019 Globalscale technologies, Inc.
- * Copyright (C) 2021 Sartura Ltd.
- *
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-7040.dtsi"
-
-/ {
- model = "Globalscale MOCHAbin";
- compatible = "globalscale,mochabin", "marvell,armada7040",
- "marvell,armada-ap806-quad", "marvell,armada-ap806";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp0_eth1;
- ethernet2 = &cp0_eth2;
- ethernet3 = &swport1;
- ethernet4 = &swport2;
- ethernet5 = &swport3;
- ethernet6 = &swport4;
- };
-
- /* SFP+ 10G */
- sfp_eth0: sfp-eth0 {
- compatible = "sff,sfp";
- i2c-bus = <&cp0_i2c1>;
- los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
- };
-
- /* SFP 1G */
- sfp_eth2: sfp-eth2 {
- compatible = "sff,sfp";
- i2c-bus = <&cp0_i2c0>;
- los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
- };
-};
-
-/* microUSB UART console */
-&uart0 {
- status = "okay";
-
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-/* eMMC */
-&ap_sdhci0 {
- status = "okay";
-
- bus-width = <4>;
- non-removable;
- /delete-property/ marvell,xenon-phy-slow-mode;
- no-1-8-v;
-};
-
-&cp0_pinctrl {
- cp0_uart0_pins: cp0-uart0-pins {
- marvell,pins = "mpp6", "mpp7";
- marvell,function = "uart0";
- };
-
- cp0_spi0_pins: cp0-spi0-pins {
- marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
- marvell,function = "spi0";
- };
-
- cp0_spi1_pins: cp0-spi1-pins {
- marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
-
- cp0_i2c0_pins: cp0-i2c0-pins {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
-
- cp0_i2c1_pins: cp0-i2c1-pins {
- marvell,pins = "mpp2", "mpp3";
- marvell,function = "i2c1";
- };
-
- pca9554_int_pins: pca9554-int-pins {
- marvell,pins = "mpp27";
- marvell,function = "gpio";
- };
-
- cp0_rgmii1_pins: cp0-rgmii1-pins {
- marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49",
- "mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55";
- marvell,function = "ge1";
- };
-
- is31_sdb_pins: is31-sdb-pins {
- marvell,pins = "mpp30";
- marvell,function = "gpio";
- };
-
- cp0_pcie_reset_pins: cp0-pcie-reset-pins {
- marvell,pins = "mpp9";
- marvell,function = "gpio";
- };
-
- cp0_switch_pins: cp0-switch-pins {
- marvell,pins = "mpp0", "mpp1";
- marvell,function = "gpio";
- };
-
- cp0_phy_pins: cp0-phy-pins {
- marvell,pins = "mpp12";
- marvell,function = "gpio";
- };
-};
-
-/* mikroBUS UART */
-&cp0_uart0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_uart0_pins>;
-};
-
-/* mikroBUS SPI */
-&cp0_spi0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_spi0_pins>;
-};
-
-/* SPI-NOR */
-&cp0_spi1{
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_spi1_pins>;
-
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <20000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x3e0000>;
- read-only;
- };
-
- partition@3e0000 {
- label = "hw-info";
- reg = <0x3e0000 0x10000>;
- read-only;
- };
-
- partition@3f0000 {
- label = "u-boot-env";
- reg = <0x3f0000 0x10000>;
- };
- };
- };
-};
-
-/* mikroBUS, 1G SFP and GPIO expander */
-&cp0_i2c0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c0_pins>;
- clock-frequency = <100000>;
-
- sfp_gpio: pca9554@39 {
- compatible = "nxp,pca9554";
- pinctrl-names = "default";
- pinctrl-0 = <&pca9554_int_pins>;
- reg = <0x39>;
-
- interrupt-parent = <&cp0_gpio1>;
- interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- /*
- * IO0_0: SFP+_TX_FAULT
- * IO0_1: SFP+_TX_DISABLE
- * IO0_2: SFP+_PRSNT
- * IO0_3: SFP+_LOSS
- * IO0_4: SFP_TX_FAULT
- * IO0_5: SFP_TX_DISABLE
- * IO0_6: SFP_PRSNT
- * IO0_7: SFP_LOSS
- */
- };
-};
-
-/* IS31FL3199, mini-PCIe and 10G SFP+ */
-&cp0_i2c1 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c1_pins>;
- clock-frequency = <100000>;
-
- leds@64 {
- compatible = "issi,is31fl3199";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&is31_sdb_pins>;
- shutdown-gpios = <&cp0_gpio1 30 GPIO_ACTIVE_HIGH>;
- reg = <0x64>;
-
- led1_red: led@1 {
- label = "red:led1";
- reg = <1>;
- led-max-microamp = <20000>;
- };
-
- led1_green: led@2 {
- label = "green:led1";
- reg = <2>;
- };
-
- led1_blue: led@3 {
- label = "blue:led1";
- reg = <3>;
- };
-
- led2_red: led@4 {
- label = "red:led2";
- reg = <4>;
- };
-
- led2_green: led@5 {
- label = "green:led2";
- reg = <5>;
- };
-
- led2_blue: led@6 {
- label = "blue:led2";
- reg = <6>;
- };
-
- led3_red: led@7 {
- label = "red:led3";
- reg = <7>;
- };
-
- led3_green: led@8 {
- label = "green:led3";
- reg = <8>;
- };
-
- led3_blue: led@9 {
- label = "blue:led3";
- reg = <9>;
- };
- };
-};
-
-&cp0_mdio {
- status = "okay";
-
- /* 88E1512 PHY */
- eth2phy: ethernet-phy@1 {
- reg = <1>;
- sfp = <&sfp_eth2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_phy_pins>;
- reset-gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- /* 88E6141 Topaz switch */
- switch: switch@3 {
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_switch_pins>;
- reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>;
-
- interrupt-parent = <&cp0_gpio1>;
- interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- swport1: port@1 {
- reg = <1>;
- label = "lan0";
- phy-handle = <&swphy1>;
- };
-
- swport2: port@2 {
- reg = <2>;
- label = "lan1";
- phy-handle = <&swphy2>;
- };
-
- swport3: port@3 {
- reg = <3>;
- label = "lan2";
- phy-handle = <&swphy3>;
- };
-
- swport4: port@4 {
- reg = <4>;
- label = "lan3";
- phy-handle = <&swphy4>;
- };
-
- port@5 {
- reg = <5>;
- ethernet = <&cp0_eth1>;
- phy-mode = "2500base-x";
- managed = "in-band-status";
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- swphy1: swphy1@17 {
- reg = <17>;
- };
-
- swphy2: swphy2@18 {
- reg = <18>;
- };
-
- swphy3: swphy3@19 {
- reg = <19>;
- };
-
- swphy4: swphy4@20 {
- reg = <20>;
- };
- };
- };
-};
-
-&cp0_ethernet {
- status = "okay";
-};
-
-/* 10G SFP+ */
-&cp0_eth0 {
- status = "okay";
-
- phy-mode = "10gbase-r";
- phys = <&cp0_comphy4 0>;
- managed = "in-band-status";
- sfp = <&sfp_eth0>;
-};
-
-/* Topaz switch uplink */
-&cp0_eth1 {
- status = "okay";
-
- phy-mode = "2500base-x";
- phys = <&cp0_comphy0 1>;
-
- fixed-link {
- speed = <2500>;
- full-duplex;
- };
-};
-
-/* 1G SFP or 1G RJ45 */
-&cp0_eth2 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_rgmii1_pins>;
-
- phy = <ð2phy>;
- phy-mode = "rgmii-id";
-};
-
-/* SMSC USB5434B hub */
-&cp0_usb3_0 {
- status = "okay";
-
- phys = <&cp0_comphy1 0>;
- phy-names = "cp0-usb3h0-comphy";
-};
-
-/* miniPCI-E USB */
-&cp0_usb3_1 {
- status = "okay";
-};
-
-&cp0_sata0 {
- status = "okay";
-
- /* 7 + 12 SATA connector (J24) */
- sata-port@0 {
- phys = <&cp0_comphy2 0>;
- phy-names = "cp0-sata0-0-phy";
- };
-
- /* M.2-2250 B-key (J39) */
- sata-port@1 {
- phys = <&cp0_comphy3 1>;
- phy-names = "cp0-sata0-1-phy";
- };
-};
-
-/* miniPCI-E (J5) */
-&cp0_pcie2 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_pcie_reset_pins>;
- phys = <&cp0_comphy5 2>;
- phy-names = "cp0-pcie2-x1-phy";
- reset-gpio = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>;
- ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright SolidRun Ltd.
- * Copyright (C) 2024 Tobias Schramm <tobias@t-sys.eu>
- *
- * Device tree for the CN9130-based ClearFog Pro
- */
-
-#include "cn9130.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "SolidRun ClearFog Pro";
- compatible = "solidrun,clearfog-pro", "marvell,armada-ap807-quad",
- "marvell,armada-ap807";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- gpio1 = &cp0_gpio1;
- gpio2 = &cp0_gpio2;
- i2c0 = &cp0_i2c0;
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp0_eth1;
- ethernet2 = &cp0_eth2;
- spi1 = &cp0_spi1;
- };
-
- memory@00000000 {
- reg = <0x0 0x0 0x1 0x0>;
- device_type = "memory";
- };
-
- /* Virtual regulator, root of power tree */
- vin: regulator-vin {
- compatible = "regulator-fixed";
- regulator-name = "vin";
- regulator-always-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- /* Regulators supplied by vin */
- v_5v0: regulator-v_5v0 {
- compatible = "regulator-fixed";
- regulator-name = "v_5v0";
- regulator-always-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vin>;
- };
-
- v_3v3: regulator-v_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "v_3v3";
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vin>;
- };
-
- /* Regulators supplied by v_5v0 */
- v_1v8: regulator-v_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "v_1v8";
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&v_5v0>;
- };
-
- v_5v0_usb3_hst_vbus: regulator-v_5v0_usb3_hst_vbus {
- compatible = "regulator-fixed";
- regulator-name = "v_5v0_usb3_hst_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&expander0 6 GPIO_ACTIVE_LOW>;
- vin-supply = <&v_5v0>;
- };
-
- /* Regulators internal to SOM */
- vqmmc: regulator-vqmmc {
- compatible = "regulator-fixed";
- regulator-name = "vqmmc";
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&v_5v0>;
- };
-
- cp0_usb3_0_phy1: cp0_usb3_phy@1 {
- compatible = "usb-nop-xceiv";
- vbus-supply = <&v_5v0_usb3_hst_vbus>;
- };
-
- cp0_sfp_eth0: sfp-eth@0 {
- compatible = "sff,sfp";
- i2c-bus = <&cp0_i2c1>;
- los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
- maximum-power-milliwatt = <2000>;
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_button_pin>;
-
- reset {
- label = "Reset";
- linux,code = <KEY_RESTART>;
- gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&uart0 {
- status = "okay";
-};
-
-/* on-board eMMC */
-&ap_sdhci0 {
- bus-width = <8>;
- pinctrl-names = "default";
- vqmmc-supply = <&vqmmc>;
- status = "okay";
-};
-
-&cp0_crypto {
- status = "okay";
-};
-
-&cp0_ethernet {
- status = "okay";
-};
-
-&cp0_gpio1 {
- status = "okay";
-};
-
-&cp0_gpio2 {
- status = "okay";
-};
-
-&cp0_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c0_pins>;
- clock-frequency = <100000>;
-
- /*
- * PCA9655 GPIO expander, up to 1MHz clock.
- * 0-CON3 CLKREQ#
- * 1-CON3 PERST#
- * 2-CON2 PERST#
- * 3-CON3 W_DISABLE
- * 4-CON2 CLKREQ#
- * 5-USB3 overcurrent
- * 6-USB3 power
- * 7-CON2 W_DISABLE
- * 8-JP4 P1
- * 9-JP4 P4
- * 10-JP4 P5
- * 11-m.2 DEVSLP
- * 12-SFP_LOS
- * 13-SFP_TX_FAULT
- * 14-SFP_TX_DISABLE
- * 15-SFP_MOD_DEF0
- */
- expander0: gpio-expander@20 {
- compatible = "nxp,pca9555";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&cp0_gpio1>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_expander0_pins>;
- vcc-supply = <&v_3v3>;
-
- pcie1_0_clkreq {
- gpio-hog;
- gpios = <0 GPIO_ACTIVE_LOW>;
- input;
- line-name = "pcie1.0-clkreq";
- };
-
- pcie1_0_w_disable {
- gpio-hog;
- gpios = <3 GPIO_ACTIVE_LOW>;
- output-low;
- line-name = "pcie1.0-w-disable";
- };
-
- pcie2_0_clkreq {
- gpio-hog;
- gpios = <4 GPIO_ACTIVE_LOW>;
- input;
- line-name = "pcie2.0-clkreq";
- };
-
- pcie2_0_w_disable {
- gpio-hog;
- gpios = <7 GPIO_ACTIVE_LOW>;
- output-low;
- line-name = "pcie2.0-w-disable";
- };
-
- usb3_ilimit {
- gpio-hog;
- gpios = <5 GPIO_ACTIVE_LOW>;
- input;
- line-name = "usb3-current-limit";
- };
-
- m2_devslp {
- gpio-hog;
- gpios = <11 GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "m.2 devslp";
- };
- };
-
- /* ADC only for mikroBUS connector */
- mcp3021@4c {
- compatible = "microchip,mcp3021";
- reg = <0x4c>;
- };
-
- /* EEPROM on the SOM */
- eeprom@53 {
- compatible = "atmel,24c02";
- reg = <0x53>;
- pagesize = <16>;
- read-only;
-
- nvmem-layout {
- compatible = "onie,tlv-layout";
-
- onie_tlv_macaddr: mac-address {
- #nvmem-cell-cells = <1>;
- };
- };
- };
-};
-
-/* SMBUS on mini PCIe sockets */
-&cp0_i2c1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c1_pins>;
- clock-frequency = <100000>;
-};
-
-&cp0_mdio {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- /* Green led blinks on activity, orange LED on link */
- marvell,reg-init = <3 16 0 0x0064>;
- };
-
- switch@4 {
- compatible = "marvell,mv88e6085";
- reg = <4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&cp0_gpio1>;
- interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_dsa0_pins>;
- reset-gpios = <&cp0_gpio1 27 GPIO_ACTIVE_LOW>;
-
- mdio-external {
- compatible = "marvell,mv88e6xxx-mdio-external";
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* 88E1512 PHY */
- port6_phy: ethernet-phy@1 {
- reg = <1>;
- };
- };
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "lan5";
- };
-
- port@1 {
- reg = <1>;
- label = "lan4";
- };
-
- port@2 {
- reg = <2>;
- label = "lan3";
- };
-
- port@3 {
- reg = <3>;
- label = "lan2";
- };
-
- port@4 {
- reg = <4>;
- label = "lan1";
- };
-
- port@5 {
- reg = <5>;
- ethernet = <&cp0_eth1>;
- label = "cpu";
- phy-mode = "rgmii-id";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- port@6 {
- /* 88E1512 external phy */
- reg = <6>;
- label = "lan6";
- phy-handle = <&port6_phy>;
- phy-mode = "rgmii-id";
- };
- };
- };
-};
-
-/* SRDS #0 - SATA on bottom M.2 B-Key connector */
-&cp0_sata0 {
- status = "okay";
-
- sata-port@0 {
- status = "disabled";
- };
-
- sata-port@1 {
- phys = <&cp0_comphy0 1>;
- target-supply = <&v_3v3>;
- };
-};
-
-&cp0_utmi {
- status = "okay";
-};
-
-/* mini PCIe slot far from SOM, USB 2.0 only, SS lanes unused */
-&cp0_usb3_0 {
- status = "okay";
- phys = <&cp0_utmi0>;
- phy-names = "utmi";
- dr_mode = "host";
-};
-
-/* SRDS #1 - USB-A 3.0 host port */
-&cp0_usb3_1 {
- status = "okay";
- phys = <&cp0_utmi1>, <&cp0_comphy1 0>;
- phy-names = "utmi", "usb";
- usb-phy = <&cp0_usb3_0_phy1>;
- dr_mode = "host";
-};
-
-/* SRDS #2 - SFP+ 10GE */
-&cp0_eth0 {
- status = "okay";
- phy-mode = "10gbase-r";
- phys = <&cp0_comphy2 0>;
- managed = "in-band-status";
- nvmem-cells = <&onie_tlv_macaddr 0>;
- nvmem-cell-names = "mac-address";
- sfp = <&cp0_sfp_eth0>;
-};
-
-/* SRDS #3 - SGMII 1GE to L2 switch */
-&cp0_eth1 {
- status = "okay";
- phys = <&cp0_comphy3 1>;
- phy-mode = "sgmii";
- nvmem-cells = <&onie_tlv_macaddr 1>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-/* SRDS #4 - mini PCIe slot near SOM */
-&cp0_pcie1 {
- status = "okay";
- phys = <&cp0_comphy4 1>;
- num-lanes = <1>;
- reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
-};
-
-/* SRDS #5 - mini PCIe slot far from SOM */
-&cp0_pcie2 {
- status = "okay";
- phys = <&cp0_comphy5 2>;
- num-lanes = <1>;
- reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
-};
-
-/* GE PHY RGMII */
-&cp0_eth2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_ge2_rgmii_pins>;
- phy = <&phy0>;
- phy-mode = "rgmii-id";
- nvmem-cells = <&onie_tlv_macaddr 2>;
- nvmem-cell-names = "mac-address";
-};
-
-/* micro SD card slot */
-&cp0_sdhci0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_sdhci_pins &cp0_sdhci_cd_pins>;
- bus-width = <4>;
- cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
- no-1-8-v;
- vqmmc-supply = <&v_3v3>;
- vmmc-supply = <&v_3v3>;
-};
-
-&cp0_spi1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_spi1_pins>;
-
- spi-flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- spi-max-frequency = <10000000>;
- };
-};
-
-&cp0_syscon0 {
- cp0_pinctrl: pinctrl {
- compatible = "marvell,cp115-standalone-pinctrl";
-
- cp0_i2c0_pins: cp0-i2c0-pins {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
-
- cp0_i2c1_pins: cp0-i2c1-pins {
- marvell,pins = "mpp35", "mpp36";
- marvell,function = "i2c1";
- };
-
- cp0_ge2_rgmii_pins: cp0-ge2-rgmii-pins {
- marvell,pins = "mpp44", "mpp45", "mpp46",
- "mpp47", "mpp48", "mpp49",
- "mpp50", "mpp51", "mpp52",
- "mpp53", "mpp54", "mpp55";
- marvell,function = "ge1";
- };
-
- cp0_sdhci_cd_pins: cp0-sdhci-cd-pins {
- marvell,pins = "mpp43";
- marvell,function = "sdio";
- };
-
- cp0_sdhci_pins: cp0-sdhci-pins {
- marvell,pins = "mpp56", "mpp57", "mpp58",
- "mpp59", "mpp60", "mpp61";
- marvell,function = "sdio";
- };
-
- cp0_spi1_pins: cp0-spi1-pins {
- marvell,pins = "mpp12", "mpp13", "mpp14",
- "mpp15", "mpp16";
- marvell,function = "spi1";
- };
-
- cp0_dsa0_pins: cp0-dsa0-pins {
- marvell,pins = "mpp27", "mpp29";
- marvell,function = "gpio";
- };
-
- cp0_button_pin: cp0-button-pin {
- marvell,pins = "mpp32";
- marvell,function = "gpio";
- };
-
- cp0_expander0_pins: cp0-expander0-pins {
- marvell,pins = "mpp4";
- marvell,function = "gpio";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright (C) 2019 Marvell International Ltd.
- *
- * Device tree for the CN9131-DB board.
- */
-
-#include "cn9130.dtsi"
-#include "puzzle-thermal.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "iEi Puzzle-M901";
- compatible = "iei,puzzle-m901",
- "marvell,armada-ap807-quad", "marvell,armada-ap807";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- i2c0 = &cp1_i2c0;
- i2c1 = &cp0_i2c0;
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp0_eth1;
- ethernet2 = &cp0_eth2;
- ethernet3 = &cp1_eth0;
- ethernet4 = &cp1_eth1;
- ethernet5 = &cp1_eth2;
- gpio1 = &cp0_gpio1;
- gpio2 = &cp0_gpio2;
- gpio3 = &cp1_gpio1;
- gpio4 = &cp1_gpio2;
- led-boot = &led_power;
- led-failsafe = &led_info;
- led-running = &led_power;
- led-upgrade = &led_info;
- };
-
- memory@00000000 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- gpio_keys {
- compatible = "gpio-keys";
-
- reset {
- label = "Reset";
- linux,code = <KEY_RESTART>;
- gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&uart0 {
- status = "okay";
-};
-
-&cp0_uart0 {
- status = "okay";
-
- puzzle-mcu {
- compatible = "iei,wt61p803-puzzle";
- #address-cells = <1>;
- #size-cells = <1>;
- current-speed = <115200>;
- enable-beep;
- status = "okay";
-
- leds {
- compatible = "iei,wt61p803-puzzle-leds";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- led@0 {
- reg = <0>;
- label = "white:network";
- active-low;
- };
-
- led@1 {
- reg = <1>;
- label = "green:cloud";
- active-low;
- };
-
- led_info: led@2 {
- reg = <2>;
- label = "orange:info";
- active-low;
- };
-
- led_power: led@3 {
- reg = <3>;
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_YELLOW>;
- active-low;
- default-state = "on";
- };
- };
-
- hwmon {
- compatible = "iei,wt61p803-puzzle-hwmon";
- #address-cells = <1>;
- #size-cells = <0>;
-
- chassis_fan_group0: fan-group@0 {
- #cooling-cells = <2>;
- reg = <0x00>;
- cooling-levels = <0 159 195 211 223 241 255>;
- };
- };
- };
-};
-
-&ap_thermal_ic {
- PUZZLE_FAN_THERMAL(ic, &chassis_fan_group0);
-};
-
-&cp0_thermal_ic {
- PUZZLE_FAN_THERMAL(cp0, &chassis_fan_group0);
-};
-
-/* on-board eMMC - U9 */
-&ap_sdhci0 {
- pinctrl-names = "default";
- bus-width = <8>;
- status = "okay";
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
-};
-
-&cp0_crypto {
- status = "okay";
-};
-
-&cp0_xmdio {
- status = "okay";
- cp0_nbaset_phy0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <2>;
- };
- cp0_nbaset_phy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0>;
- };
- cp0_nbaset_phy2: ethernet-phy@2 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <8>;
- };
-};
-
-&cp0_ethernet {
- status = "okay";
-};
-
-/* SLM-1521-V2, CON9 */
-&cp0_eth0 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp0_comphy2 0>;
- phy = <&cp0_nbaset_phy0>;
-};
-
-&cp0_eth1 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp0_comphy4 1>;
- phy = <&cp0_nbaset_phy1>;
-};
-
-&cp0_eth2 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp0_comphy5 2>;
- phy = <&cp0_nbaset_phy2>;
-};
-
-&cp0_gpio1 {
- status = "okay";
-};
-
-&cp0_gpio2 {
- status = "okay";
-};
-
-&cp0_i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c0_pins>;
- status = "okay";
- clock-frequency = <100000>;
- rtc@32 {
- compatible = "epson,rx8130";
- reg = <0x32>;
- wakeup-source;
- };
-};
-
-/* SLM-1521-V2, CON6 */
-&cp0_pcie0 {
- status = "okay";
- num-lanes = <2>;
- num-viewport = <8>;
- phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>;
-};
-
-/* U55 */
-&cp0_spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_spi0_pins>;
- reg = <0x700680 0x50>, /* control */
- <0x2000000 0x1000000>; /* CS0 */
- status = "okay";
- spi-flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- spi-max-frequency = <40000000>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x1f0000>;
- };
- partition@1f0000 {
- label = "U-Boot ENV Factory";
- reg = <0x1f0000 0x10000>;
- };
- partition@200000 {
- label = "Reserved";
- reg = <0x200000 0x1f0000>;
- };
- partition@3f0000 {
- label = "U-Boot ENV";
- reg = <0x3f0000 0x10000>;
- };
- };
- };
-};
-
-&cp0_rtc {
- status = "disabled";
-};
-
-&cp0_syscon0 {
- cp0_pinctrl: pinctrl {
- compatible = "marvell,cp115-standalone-pinctrl";
- cp0_i2c0_pins: cp0-i2c-pins-0 {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- cp0_i2c1_pins: cp0-i2c-pins-1 {
- marvell,pins = "mpp35", "mpp36";
- marvell,function = "i2c1";
- };
- cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
- marvell,pins = "mpp0", "mpp1", "mpp2",
- "mpp3", "mpp4", "mpp5",
- "mpp6", "mpp7", "mpp8",
- "mpp9", "mpp10", "mpp11";
- marvell,function = "ge0";
- };
- cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
- marvell,pins = "mpp44", "mpp45", "mpp46",
- "mpp47", "mpp48", "mpp49",
- "mpp50", "mpp51", "mpp52",
- "mpp53", "mpp54", "mpp55";
- marvell,function = "ge1";
- };
- cp0_spi0_pins: cp0-spi-pins-0 {
- marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
- };
-};
-
-/*
- * Instantiate the first connected CP115
- */
-
-#define CP11X_NAME cp1
-#define CP11X_BASE f6000000
-#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
-#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
-#define CP11X_PCIE0_BASE f6600000
-#define CP11X_PCIE1_BASE f6620000
-#define CP11X_PCIE2_BASE f6640000
-
-#include "armada-cp115.dtsi"
-
-#undef CP11X_NAME
-#undef CP11X_BASE
-#undef CP11X_PCIEx_MEM_BASE
-#undef CP11X_PCIEx_MEM_SIZE
-#undef CP11X_PCIE0_BASE
-#undef CP11X_PCIE1_BASE
-#undef CP11X_PCIE2_BASE
-
-&cp1_crypto {
- status = "okay";
-};
-
-&cp1_xmdio {
- status = "okay";
- cp1_nbaset_phy0: ethernet-phy@3 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <2>;
- };
- cp1_nbaset_phy1: ethernet-phy@4 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0>;
- };
- cp1_nbaset_phy2: ethernet-phy@5 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <8>;
- };
-};
-
-&cp1_ethernet {
- status = "okay";
-};
-
-/* CON50 */
-&cp1_eth0 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp1_comphy2 0>;
- phy = <&cp1_nbaset_phy0>;
-};
-
-&cp1_eth1 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp1_comphy4 1>;
- phy = <&cp1_nbaset_phy1>;
-};
-
-&cp1_eth2 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp1_comphy5 2>;
- phy = <&cp1_nbaset_phy2>;
-};
-
-&cp1_sata0 {
- status = "okay";
- sata-port@1 {
- status = "okay";
- phys = <&cp1_comphy0 1>;
- };
-};
-
-&cp1_gpio1 {
- status = "okay";
-};
-
-&cp1_gpio2 {
- status = "okay";
-};
-
-&cp1_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_i2c0_pins>;
- clock-frequency = <100000>;
-};
-
-&cp1_rtc {
- status = "disabled";
-};
-
-&cp1_syscon0 {
- cp1_pinctrl: pinctrl {
- compatible = "marvell,cp115-standalone-pinctrl";
- cp1_i2c0_pins: cp1-i2c-pins-0 {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- cp1_spi0_pins: cp1-spi-pins-0 {
- marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
- cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
- marvell,pins = "mpp3";
- marvell,function = "gpio";
- };
- cp1_sfp_pins: sfp-pins {
- marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11";
- marvell,function = "gpio";
- };
- };
-};
-
-&cp1_thermal_ic {
- PUZZLE_FAN_THERMAL(cp1, &chassis_fan_group0);
-};
-
-&cp1_usb3_1 {
- status = "okay";
- phys = <&cp1_comphy3 1>;
- phy-names = "usb";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright (C) 2019 Marvell International Ltd.
- *
- * Device tree for the CN9132-DB board.
- */
-
-#include "cn9130.dtsi"
-#include "puzzle-thermal.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "iEi Puzzle-M902";
- compatible = "iei,puzzle-m902",
- "marvell,armada-ap807-quad", "marvell,armada-ap807";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- i2c0 = &cp1_i2c0;
- i2c1 = &cp0_i2c0;
- gpio1 = &cp0_gpio1;
- gpio2 = &cp0_gpio2;
- gpio3 = &cp1_gpio1;
- gpio4 = &cp1_gpio2;
- gpio5 = &cp2_gpio1;
- gpio6 = &cp2_gpio2;
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp0_eth1;
- ethernet2 = &cp0_eth2;
- ethernet3 = &cp1_eth0;
- ethernet4 = &cp1_eth1;
- ethernet5 = &cp1_eth2;
- ethernet6 = &cp2_eth0;
- ethernet7 = &cp2_eth1;
- ethernet8 = &cp2_eth2;
- spi1 = &cp0_spi0;
- spi2 = &cp0_spi1;
- led-boot = &led_power;
- led-failsafe = &led_info;
- led-running = &led_power;
- led-upgrade = &led_info;
- };
-
- memory@00000000 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- gpio_keys {
- compatible = "gpio-keys";
-
- reset {
- label = "Reset";
- linux,code = <KEY_RESTART>;
- gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>;
- };
- };
-
- cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
- compatible = "regulator-fixed";
- regulator-name = "cp2-xhci0-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
- };
-
- cp2_usb3_0_phy0: cp2_usb3_phy0 {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp2_reg_usb3_vbus0>;
- };
-
- cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
- compatible = "regulator-fixed";
- regulator-name = "cp2-xhci1-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
- };
-
- cp2_usb3_0_phy1: cp2_usb3_phy1 {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp2_reg_usb3_vbus1>;
- };
-
- cp2_sfp_eth0: sfp-eth0 {
- compatible = "sff,sfp";
- i2c-bus = <&cp2_sfpp0_i2c>;
- los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
- status = "disabled";
- };
-};
-
-&uart0 {
- status = "okay";
-};
-
-&cp0_uart0 {
- status = "okay";
-
- puzzle-mcu {
- compatible = "iei,wt61p803-puzzle";
- #address-cells = <1>;
- #size-cells = <1>;
- current-speed = <115200>;
- enable-beep;
- status = "okay";
-
- leds {
- compatible = "iei,wt61p803-puzzle-leds";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- led@0 {
- reg = <0>;
- label = "white:network";
- active-low;
- };
-
- led@1 {
- reg = <1>;
- label = "green:cloud";
- active-low;
- };
-
- led_info: led@2 {
- reg = <2>;
- label = "orange:info";
- active-low;
- };
-
- led_power: led@3 {
- reg = <3>;
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_YELLOW>;
- active-low;
- default-state = "on";
- };
- };
-
- hwmon {
- compatible = "iei,wt61p803-puzzle-hwmon";
- #address-cells = <1>;
- #size-cells = <0>;
-
- chassis_fan_group0: fan-group@0 {
- #cooling-cells = <2>;
- reg = <0x00>;
- cooling-levels = <0 159 195 211 223 241 255>;
- };
- };
- };
-};
-
-&ap_thermal_ic {
- PUZZLE_FAN_THERMAL(ic, &chassis_fan_group0);
-};
-
-&cp0_thermal_ic {
- PUZZLE_FAN_THERMAL(cp0, &chassis_fan_group0);
-};
-
-
-/* on-board eMMC - U9 */
-&ap_sdhci0 {
- pinctrl-names = "default";
- bus-width = <8>;
- status = "okay";
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
-};
-
-&cp0_crypto {
- status = "okay";
-};
-
-&cp0_xmdio {
- status = "okay";
- cp0_nbaset_phy0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <2>;
- };
- cp0_nbaset_phy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0>;
- };
- cp0_nbaset_phy2: ethernet-phy@2 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <8>;
- };
-};
-
-&cp0_ethernet {
- status = "okay";
-};
-
-/* SLM-1521-V2, CON9 */
-&cp0_eth0 {
- status = "okay";
- phy-mode = "10gbase-kr";
- phys = <&cp0_comphy2 0>;
- phy = <&cp0_nbaset_phy0>;
-};
-
-&cp0_eth1 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp0_comphy4 1>;
- phy = <&cp0_nbaset_phy1>;
-};
-
-&cp0_eth2 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp0_comphy1 2>;
- phy = <&cp0_nbaset_phy2>;
-};
-
-&cp0_gpio1 {
- status = "okay";
-};
-
-&cp0_gpio2 {
- status = "okay";
-};
-
-&cp0_i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c0_pins>;
- status = "okay";
- clock-frequency = <100000>;
- rtc@32 {
- compatible = "epson,rx8130";
- reg = <0x32>;
- wakeup-source;
- };
-};
-
-&cp0_i2c1 {
- clock-frequency = <100000>;
-};
-
-/* SLM-1521-V2, CON6 */
-&cp0_sata0 {
- status = "okay";
- sata-port@1 {
- status = "okay";
- phys = <&cp0_comphy0 1>;
- };
-};
-
-&cp0_pcie2 {
- status = "okay";
- num-lanes = <1>;
- num-viewport = <8>;
- phys = <&cp0_comphy5 2>;
-};
-
-/* U55 */
-&cp0_spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_spi0_pins>;
- reg = <0x700680 0x50>, /* control */
- <0x2000000 0x1000000>; /* CS0 */
- status = "okay";
- spi-flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- spi-max-frequency = <40000000>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x1f0000>;
- };
- partition@1f0000 {
- label = "U-Boot ENV Factory";
- reg = <0x1f0000 0x10000>;
- };
- partition@200000 {
- label = "Reserved";
- reg = <0x200000 0x1f0000>;
- };
- partition@3f0000 {
- label = "U-Boot ENV";
- reg = <0x3f0000 0x10000>;
- };
- };
- };
-};
-
-&cp0_rtc {
- status = "disabled";
-};
-
-&cp0_syscon0 {
- cp0_pinctrl: pinctrl {
- compatible = "marvell,cp115-standalone-pinctrl";
- cp0_i2c0_pins: cp0-i2c-pins-0 {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- cp0_i2c1_pins: cp0-i2c-pins-1 {
- marvell,pins = "mpp35", "mpp36";
- marvell,function = "i2c1";
- };
- cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
- marvell,pins = "mpp0", "mpp1", "mpp2",
- "mpp3", "mpp4", "mpp5",
- "mpp6", "mpp7", "mpp8",
- "mpp9", "mpp10", "mpp11";
- marvell,function = "ge0";
- };
- cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
- marvell,pins = "mpp44", "mpp45", "mpp46",
- "mpp47", "mpp48", "mpp49",
- "mpp50", "mpp51", "mpp52",
- "mpp53", "mpp54", "mpp55";
- marvell,function = "ge1";
- };
- cp0_spi0_pins: cp0-spi-pins-0 {
- marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
- };
-};
-
-&cp0_usb3_1 {
- status = "okay";
- phys = <&cp0_comphy3 1>;
- phy-names = "usb";
-};
-
-/*
- * Instantiate the first connected CP115
- */
-
-#define CP11X_NAME cp1
-#define CP11X_BASE f4000000
-#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
-#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
-#define CP11X_PCIE0_BASE f4600000
-#define CP11X_PCIE1_BASE f4620000
-#define CP11X_PCIE2_BASE f4640000
-
-#include "armada-cp115.dtsi"
-
-#undef CP11X_NAME
-#undef CP11X_BASE
-#undef CP11X_PCIEx_MEM_BASE
-#undef CP11X_PCIEx_MEM_SIZE
-#undef CP11X_PCIE0_BASE
-#undef CP11X_PCIE1_BASE
-#undef CP11X_PCIE2_BASE
-
-&cp1_crypto {
- status = "okay";
-};
-
-&cp1_xmdio {
- status = "okay";
- cp1_nbaset_phy0: ethernet-phy@3 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <2>;
- };
- cp1_nbaset_phy1: ethernet-phy@4 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0>;
- };
- cp1_nbaset_phy2: ethernet-phy@5 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <8>;
- };
-};
-
-&cp1_ethernet {
- status = "okay";
-};
-
-/* CON50 */
-&cp1_eth0 {
- status = "okay";
- phy-mode = "10gbase-kr";
- phys = <&cp1_comphy2 0>;
- phy = <&cp1_nbaset_phy0>;
-};
-
-&cp1_eth1 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp1_comphy4 1>;
- phy = <&cp1_nbaset_phy1>;
-};
-
-&cp1_eth2 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp1_comphy1 2>;
- phy = <&cp1_nbaset_phy2>;
-};
-
-&cp1_gpio1 {
- status = "okay";
-};
-
-&cp1_gpio2 {
- status = "okay";
-};
-
-&cp1_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_i2c0_pins>;
- clock-frequency = <100000>;
-};
-
-&cp1_rtc {
- status = "disabled";
-};
-
-&cp1_syscon0 {
- cp1_pinctrl: pinctrl {
- compatible = "marvell,cp115-standalone-pinctrl";
- cp1_i2c0_pins: cp1-i2c-pins-0 {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- cp1_spi0_pins: cp1-spi-pins-0 {
- marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
- cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
- marvell,pins = "mpp3";
- marvell,function = "gpio";
- };
- };
-};
-
-&cp1_thermal_ic {
- PUZZLE_FAN_THERMAL(cp1, &chassis_fan_group0);
-};
-
-/*
- * Instantiate the second connected CP115
- */
-
-#define CP11X_NAME cp2
-#define CP11X_BASE f6000000
-#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
-#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
-#define CP11X_PCIE0_BASE f6600000
-#define CP11X_PCIE1_BASE f6620000
-#define CP11X_PCIE2_BASE f6640000
-
-#include "armada-cp115.dtsi"
-
-#undef CP11X_NAME
-#undef CP11X_BASE
-#undef CP11X_PCIEx_MEM_BASE
-#undef CP11X_PCIEx_MEM_SIZE
-#undef CP11X_PCIE0_BASE
-#undef CP11X_PCIE1_BASE
-#undef CP11X_PCIE2_BASE
-
-&cp2_crypto {
- status = "okay";
-};
-
-&cp2_ethernet {
- status = "okay";
-};
-
-&cp2_xmdio {
- status = "okay";
- cp2_nbaset_phy0: ethernet-phy@6 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <2>;
- };
- cp2_nbaset_phy1: ethernet-phy@7 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0>;
- };
- cp2_nbaset_phy2: ethernet-phy@8 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <8>;
- };
-};
-
-/* SLM-1521-V2, CON9 */
-&cp2_eth0 {
- status = "okay";
- phy-mode = "10gbase-kr";
- phys = <&cp2_comphy2 0>;
- phy = <&cp2_nbaset_phy0>;
-};
-
-&cp2_eth1 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp2_comphy4 1>;
- phy = <&cp2_nbaset_phy1>;
-};
-
-&cp2_eth2 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp2_comphy1 2>;
- phy = <&cp2_nbaset_phy2>;
-};
-
-&cp2_gpio1 {
- status = "okay";
-};
-
-&cp2_gpio2 {
- status = "okay";
-};
-
-&cp2_i2c0 {
- clock-frequency = <100000>;
- /* SLM-1521-V2 - U3 */
- i2c-mux@72 {
- compatible = "nxp,pca9544";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72>;
- cp2_sfpp0_i2c: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- /* U12 */
- cp2_module_expander1: pca9555@21 {
- compatible = "nxp,pca9555";
- pinctrl-names = "default";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x21>;
- };
- };
- };
-};
-
-&cp2_rtc {
- status = "disabled";
-};
-
-&cp2_syscon0 {
- cp2_pinctrl: pinctrl {
- compatible = "marvell,cp115-standalone-pinctrl";
- cp2_i2c0_pins: cp2-i2c-pins-0 {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- };
-};
-
-&cp2_thermal_ic {
- PUZZLE_FAN_THERMAL(cp2, &chassis_fan_group0);
-};
+++ /dev/null
-#define PUZZLE_FAN_THERMAL(_cname, _fan) \
- polling-delay-passive = <500>; \
- polling-delay = <1000>; \
- \
- trips { \
- cpu-hot { \
- temperature = <75000>; \
- hysteresis = <5000>; \
- type = "hot"; \
- }; \
- _cname##_active_full: cpu-active-full { \
- temperature = <70000>; \
- hysteresis = <5000>; \
- type = "active"; \
- }; \
- _cname##_active_high: cpu-active-high { \
- temperature = <65000>; \
- hysteresis = <5000>; \
- type = "active"; \
- }; \
- _cname##_active_med: cpu-active-med { \
- temperature = <62500>; \
- hysteresis = <3000>; \
- type = "active"; \
- }; \
- _cname##_active_low: cpu-active-low { \
- temperature = <60000>; \
- hysteresis = <3000>; \
- type = "active"; \
- }; \
- _cname##_active_min: cpu-active-min { \
- temperature = <55000>; \
- hysteresis = <5000>; \
- type = "active"; \
- }; \
- _cname##_active_idle: cpu-active-idle { \
- temperature = <50000>; \
- hysteresis = <5000>; \
- type = "active"; \
- }; \
- }; \
- cooling-maps { \
- cpu-active-full { \
- trip = <&_cname##_active_full>; \
- cooling-device = <_fan THERMAL_NO_LIMIT \
- THERMAL_NO_LIMIT>; \
- }; \
- cpu-active-high { \
- trip = <&_cname##_active_high>; \
- cooling-device = <_fan 4 5>; \
- }; \
- cpu-active-med { \
- trip = <&_cname##_active_med>; \
- cooling-device = <_fan 3 4>; \
- }; \
- cpu-active-low { \
- trip = <&_cname##_active_low>; \
- cooling-device = <_fan 2 3>; \
- }; \
- cpu-active-min { \
- trip = <&_cname##_active_min>; \
- cooling-device = <_fan 1 2>; \
- }; \
- cpu-active-idle { \
- trip = <&_cname##_active_idle>; \
- cooling-device = <_fan 0 0>; \
- }; \
- }
# Copyright (C) 2012-2016 OpenWrt.org
# Copyright (C) 2016 LEDE-project.org
-ifneq ($(KERNEL),6.1)
DTS_DIR := $(DTS_DIR)/marvell
-endif
define Build/fortigate-header
( \
+++ /dev/null
-From 8eec6e740b564ec5e1da59ab7070b89aa23c9973 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 16 Jun 2023 12:41:30 +0100
-Subject: [PATCH] cpufreq: armada-8k: add ap807 support
-
-Add support for the Armada AP807 die to armada-8k. This uses a
-different compatible for the CPU clock which needs to be added to
-the cpufreq driver.
-
-This commit takes a different approach to the WindRiver patch
-"cpufreq: armada: enable ap807-cpu-clk" in that rather than calling
-of_find_compatible_node() for each compatible, we use a table of
-IDs instead.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
----
- drivers/cpufreq/armada-8k-cpufreq.c | 16 +++++++++-------
- 1 file changed, 9 insertions(+), 7 deletions(-)
-
---- a/drivers/cpufreq/armada-8k-cpufreq.c
-+++ b/drivers/cpufreq/armada-8k-cpufreq.c
-@@ -21,6 +21,13 @@
- #include <linux/pm_opp.h>
- #include <linux/slab.h>
-
-+static const struct of_device_id __maybe_unused armada_8k_cpufreq_of_match[] = {
-+ { .compatible = "marvell,ap806-cpu-clock" },
-+ { .compatible = "marvell,ap807-cpu-clock" },
-+ { },
-+};
-+MODULE_DEVICE_TABLE(of, armada_8k_cpufreq_of_match);
-+
- /*
- * Setup the opps list with the divider for the max frequency, that
- * will be filled at runtime.
-@@ -127,7 +134,8 @@ static int __init armada_8k_cpufreq_init
- struct device_node *node;
- struct cpumask cpus;
-
-- node = of_find_compatible_node(NULL, NULL, "marvell,ap806-cpu-clock");
-+ node = of_find_matching_node_and_match(NULL, armada_8k_cpufreq_of_match,
-+ NULL);
- if (!node || !of_device_is_available(node)) {
- of_node_put(node);
- return -ENODEV;
-@@ -204,12 +212,6 @@ static void __exit armada_8k_cpufreq_exi
- }
- module_exit(armada_8k_cpufreq_exit);
-
--static const struct of_device_id __maybe_unused armada_8k_cpufreq_of_match[] = {
-- { .compatible = "marvell,ap806-cpu-clock" },
-- { },
--};
--MODULE_DEVICE_TABLE(of, armada_8k_cpufreq_of_match);
--
- MODULE_AUTHOR("Gregory Clement <gregory.clement@bootlin.com>");
- MODULE_DESCRIPTION("Armada 8K cpufreq driver");
- MODULE_LICENSE("GPL");
+++ /dev/null
-Subject: [PATCH v2] PCI: aardvark: Implement workaround for PCIe Completion Timeout
-Date: Tue, 2 Aug 2022 14:38:16 +0200
-Message-Id: <20220802123816.21817-1-pali@kernel.org>
-X-Mailer: git-send-email 2.20.1
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-Precedence: bulk
-List-ID: <linux-pci.vger.kernel.org>
-X-Mailing-List: linux-pci@vger.kernel.org
-
-Marvell Armada 3700 Functional Errata, Guidelines, and Restrictions
-document describes in erratum 3.12 PCIe Completion Timeout (Ref #: 251),
-that PCIe IP does not support a strong-ordered model for inbound posted vs.
-outbound completion.
-
-As a workaround for this erratum, DIS_ORD_CHK flag in Debug Mux Control
-register must be set. It disables the ordering check in the core between
-Completions and Posted requests received from the link.
-
-Marvell also suggests to do full memory barrier at the beginning of
-aardvark summary interrupt handler before calling interrupt handlers of
-endpoint drivers in order to minimize the risk for the race condition
-documented in the Erratum between the DMA done status reading and the
-completion of writing to the host memory.
-
-More details about this issue and suggested workarounds are in discussion:
-https://lore.kernel.org/linux-pci/BN9PR18MB425154FE5019DCAF2028A1D5DB8D9@BN9PR18MB4251.namprd18.prod.outlook.com/t/#u
-
-It was reported that enabling this workaround fixes instability issues and
-"Unhandled fault" errors when using 60 GHz WiFi 802.11ad card with Qualcomm
-QCA6335 chip under significant load which were caused by interrupt status
-stuck in the outbound CMPLT queue traced back to this erratum.
-
-This workaround fixes also kernel panic triggered after some minutes of
-usage 5 GHz WiFi 802.11ax card with Mediatek MT7915 chip:
-
- Internal error: synchronous external abort: 96000210 [#1] SMP
- Kernel panic - not syncing: Fatal exception in interrupt
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
-Cc: stable@vger.kernel.org
----
- drivers/pci/controller/pci-aardvark.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -212,6 +212,8 @@ enum {
- };
-
- #define VENDOR_ID_REG (LMI_BASE_ADDR + 0x44)
-+#define DEBUG_MUX_CTRL_REG (LMI_BASE_ADDR + 0x208)
-+#define DIS_ORD_CHK BIT(30)
-
- /* PCIe core controller registers */
- #define CTRL_CORE_BASE_ADDR 0x18000
-@@ -560,6 +562,11 @@ static void advk_pcie_setup_hw(struct ad
- PCIE_CORE_CTRL2_TD_ENABLE;
- advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
-
-+ /* Disable ordering checks, workaround for erratum 3.12 "PCIe completion timeout" */
-+ reg = advk_readl(pcie, DEBUG_MUX_CTRL_REG);
-+ reg |= DIS_ORD_CHK;
-+ advk_writel(pcie, reg, DEBUG_MUX_CTRL_REG);
-+
- /* Set lane X1 */
- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- reg &= ~LANE_CNT_MSK;
-@@ -1661,6 +1668,9 @@ static irqreturn_t advk_pcie_irq_handler
- struct advk_pcie *pcie = arg;
- u32 status;
-
-+ /* Full memory barrier (ARM dsb sy), workaround for erratum 3.12 "PCIe completion timeout" */
-+ mb();
-+
- status = advk_readl(pcie, HOST_CTRL_INT_STATUS_REG);
- if (!(status & PCIE_IRQ_CORE_INT))
- return IRQ_NONE;
+++ /dev/null
---- a/drivers/power/reset/linkstation-poweroff.c
-+++ b/drivers/power/reset/linkstation-poweroff.c
-@@ -142,6 +142,12 @@ static void linkstation_poweroff(void)
- }
-
- static const struct of_device_id ls_poweroff_of_match[] = {
-+ { .compatible = "buffalo,ls220d",
-+ .data = &linkstation_power_off_cfg,
-+ },
-+ { .compatible = "buffalo,ls220de",
-+ .data = &linkstation_power_off_cfg,
-+ },
- { .compatible = "buffalo,ls421d",
- .data = &linkstation_power_off_cfg,
- },
+++ /dev/null
-From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001
-From: Adrian Panella <ianchi74@outlook.com>
-Date: Thu, 9 Mar 2017 09:37:17 +0100
-Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments
-
-The command-line arguments provided by the boot loader will be
-appended to a new device tree property: bootloader-args.
-If there is a property "append-rootblock" in DT under /chosen
-and a root= option in bootloaders command line it will be parsed
-and added to DT bootargs with the form: <append-rootblock>XX.
-Only command line ATAG will be processed, the rest of the ATAGs
-sent by bootloader will be ignored.
-This is usefull in dual boot systems, to get the current root partition
-without afecting the rest of the system.
-
-Signed-off-by: Adrian Panella <ianchi74@outlook.com>
-
-This patch has been modified to be mvebu specific. The original patch
-did not pass the bootloader cmdline on if no append-rootblock stanza
-was found, resulting in blank cmdline and failure to boot.
-
-Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
----
- arch/arm/Kconfig | 11 ++++
- arch/arm/boot/compressed/atags_to_fdt.c | 85 ++++++++++++++++++++++++-
- init/main.c | 16 +++++
- 3 files changed, 111 insertions(+), 1 deletion(-)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -1587,6 +1587,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
- The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
-
-+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+ bool "Append rootblock parsing bootloader's kernel arguments"
-+ help
-+ The command-line arguments provided by the boot loader will be
-+ appended to a new device tree property: bootloader-args.
-+ If there is a property "append-rootblock" in DT under /chosen
-+ and a root= option in bootloaders command line it will be parsed
-+ and added to DT bootargs with the form: <append-rootblock>XX.
-+ Only command line ATAG will be processed, the rest of the ATAGs
-+ sent by bootloader will be ignored.
-+
- endchoice
-
- config CMDLINE
---- a/arch/arm/boot/compressed/atags_to_fdt.c
-+++ b/arch/arm/boot/compressed/atags_to_fdt.c
-@@ -5,6 +5,8 @@
-
- #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
- #define do_extend_cmdline 1
-+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#define do_extend_cmdline 1
- #else
- #define do_extend_cmdline 0
- #endif
-@@ -20,6 +22,7 @@ static int node_offset(void *fdt, const
- return offset;
- }
-
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
- static int setprop(void *fdt, const char *node_path, const char *property,
- void *val_array, int size)
- {
-@@ -28,6 +31,7 @@ static int setprop(void *fdt, const char
- return offset;
- return fdt_setprop(fdt, offset, property, val_array, size);
- }
-+#endif
-
- static int setprop_string(void *fdt, const char *node_path,
- const char *property, const char *string)
-@@ -38,6 +42,7 @@ static int setprop_string(void *fdt, con
- return fdt_setprop_string(fdt, offset, property, string);
- }
-
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
- static int setprop_cell(void *fdt, const char *node_path,
- const char *property, uint32_t val)
- {
-@@ -46,6 +51,7 @@ static int setprop_cell(void *fdt, const
- return offset;
- return fdt_setprop_cell(fdt, offset, property, val);
- }
-+#endif
-
- static const void *getprop(const void *fdt, const char *node_path,
- const char *property, int *len)
-@@ -58,6 +64,7 @@ static const void *getprop(const void *f
- return fdt_getprop(fdt, offset, property, len);
- }
-
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
- static uint32_t get_cell_size(const void *fdt)
- {
- int len;
-@@ -69,6 +76,74 @@ static uint32_t get_cell_size(const void
- return cell_size;
- }
-
-+#endif
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+
-+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
-+{
-+ const char *ptr, *end;
-+ const char *root="root=";
-+ int i, l;
-+ const char *rootblock;
-+
-+ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
-+ ptr = str - 1;
-+
-+ do {
-+ //first find an 'r' at the begining or after a space
-+ do {
-+ ptr++;
-+ ptr = strchr(ptr, 'r');
-+ if (!ptr)
-+ goto no_append;
-+
-+ } while (ptr != str && *(ptr-1) != ' ');
-+
-+ //then check for the rest
-+ for(i = 1; i <= 4; i++)
-+ if(*(ptr+i) != *(root+i)) break;
-+
-+ } while (i != 5);
-+
-+ end = strchr(ptr, ' ');
-+ end = end ? (end - 1) : (strchr(ptr, 0) - 1);
-+
-+ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX )
-+ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
-+ ptr = end + 1;
-+
-+ /* if append-rootblock property is set use it to append to command line */
-+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
-+ if (rootblock == NULL)
-+ goto no_append;
-+
-+ if (*dest != ' ') {
-+ *dest = ' ';
-+ dest++;
-+ len++;
-+ }
-+
-+ if (len + l + i <= COMMAND_LINE_SIZE) {
-+ memcpy(dest, rootblock, l);
-+ dest += l - 1;
-+ memcpy(dest, ptr, i);
-+ dest += i;
-+ }
-+
-+ return dest;
-+
-+no_append:
-+ len = strlen(str);
-+ if (len + 1 < COMMAND_LINE_SIZE) {
-+ memcpy(dest, str, len);
-+ dest += len;
-+ }
-+
-+ return dest;
-+}
-+#endif
-+
- static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
- {
- char cmdline[COMMAND_LINE_SIZE];
-@@ -88,18 +163,28 @@ static void merge_fdt_bootargs(void *fdt
-
- /* and append the ATAG_CMDLINE */
- if (fdt_cmdline) {
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+ //save original bootloader args
-+ //and append ubi.mtd with root partition number to current cmdline
-+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
-+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
-+
-+#else
- len = strlen(fdt_cmdline);
- if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
- *ptr++ = ' ';
- memcpy(ptr, fdt_cmdline, len);
- ptr += len;
- }
-+#endif
- }
- *ptr = '\0';
-
- setprop_string(fdt, "/chosen", "bootargs", cmdline);
- }
-
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
- static void hex_str(char *out, uint32_t value)
- {
- uint32_t digit;
-@@ -117,6 +202,7 @@ static void hex_str(char *out, uint32_t
- }
- *out = '\0';
- }
-+#endif
-
- /*
- * Convert and fold provided ATAGs into the provided FDT.
-@@ -131,9 +217,11 @@ int atags_to_fdt(void *atag_list, void *
- struct tag *atag = atag_list;
- /* In the case of 64 bits memory size, need to reserve 2 cells for
- * address and size for each bank */
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
- __be32 mem_reg_property[2 * 2 * NR_BANKS];
-- int memcount = 0;
-- int ret, memsize;
-+ int memsize, memcount = 0;
-+#endif
-+ int ret;
-
- /* make sure we've got an aligned pointer */
- if ((u32)atag_list & 0x3)
-@@ -168,7 +256,9 @@ int atags_to_fdt(void *atag_list, void *
- else
- setprop_string(fdt, "/chosen", "bootargs",
- atag->u.cmdline.cmdline);
-- } else if (atag->hdr.tag == ATAG_MEM) {
-+ }
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+ else if (atag->hdr.tag == ATAG_MEM) {
- if (memcount >= sizeof(mem_reg_property)/4)
- continue;
- if (!atag->u.mem.size)
-@@ -212,6 +302,10 @@ int atags_to_fdt(void *atag_list, void *
- setprop(fdt, "/memory", "reg", mem_reg_property,
- 4 * memcount * memsize);
- }
-+#else
-+
-+ }
-+#endif
-
- return fdt_pack(fdt);
- }
---- a/init/main.c
-+++ b/init/main.c
-@@ -113,6 +113,10 @@
-
- #include <kunit/test.h>
-
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#include <linux/of.h>
-+#endif
-+
- static int kernel_init(void *);
-
- extern void init_IRQ(void);
-@@ -996,6 +1000,18 @@ asmlinkage __visible void __init __no_sa
- page_alloc_init();
-
- pr_notice("Kernel command line: %s\n", saved_command_line);
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+ //Show bootloader's original command line for reference
-+ if(of_chosen) {
-+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
-+ if(prop)
-+ pr_notice("Bootloader command line (ignored): %s\n", prop);
-+ else
-+ pr_notice("Bootloader command line not present\n");
-+ }
-+#endif
-+
- /* parameters may set static keys */
- jump_label_init();
- parse_early_param();
+++ /dev/null
---- a/arch/arm/mach-mvebu/Kconfig
-+++ b/arch/arm/mach-mvebu/Kconfig
-@@ -66,6 +66,7 @@ config MACH_ARMADA_38X
- select HAVE_ARM_TWD if SMP
- select MACH_MVEBU_V7
- select PINCTRL_ARMADA_38X
-+ select ARCH_WANT_LIBATA_LEDS
- help
- Say 'Y' here if you want your kernel to support boards based
- on the Marvell Armada 380/385 SoC with device tree.
+++ /dev/null
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -214,11 +214,19 @@
- &pcie1 {
- /* Marvell 88W8864, 5GHz-only */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,2ghz = <0>;
-+ };
- };
-
- &pcie2 {
- /* Marvell 88W8864, 2GHz-only */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,5ghz = <0>;
-+ };
- };
-
- &pinctrl {
---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-@@ -142,3 +142,205 @@
- };
- };
- };
-+
-+&pcie1 {
-+ mwlwifi {
-+ marvell,chainmask = <2 2>;
-+ marvell,powertable {
-+ AU =
-+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <100 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <104 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <108 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <112 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <116 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <120 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <124 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <128 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <132 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <136 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <140 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <149 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>;
-+ CA =
-+ <36 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+ <40 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+ <44 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+ <48 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
-+ CN =
-+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <149 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x16 0x16 0x16 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>;
-+ ETSI =
-+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <149 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>;
-+ FCC =
-+ <36 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <40 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <44 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <48 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
-+ };
-+ };
-+};
-+
-+&pcie2 {
-+ mwlwifi {
-+ marvell,chainmask = <2 2>;
-+ marvell,powertable {
-+ AU =
-+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+ CA =
-+ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x00 0x00 0x00 0x00 0 0xf>,
-+ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x00 0x00 0x00 0x00 0 0xf>;
-+ CN =
-+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <14 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+ ETSI =
-+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+ FCC =
-+ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-@@ -142,3 +142,205 @@
- };
- };
- };
-+
-+&pcie1 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ AU =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
-+ CA =
-+ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+ CN =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
-+ ETSI =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
-+ FCC =
-+ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
-+ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+ };
-+ };
-+};
-+
-+&pcie2 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ AU =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ CA =
-+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+ CN =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ ETSI =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ FCC =
-+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-@@ -142,3 +142,205 @@
- };
- };
- };
-+
-+&pcie1 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ AU =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
-+ CA =
-+ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+ CN =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
-+ ETSI =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
-+ FCC =
-+ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
-+ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+ };
-+ };
-+};
-+
-+&pcie2 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ AU =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ CA =
-+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+ CN =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ ETSI =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ FCC =
-+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
-@@ -157,6 +157,18 @@
- };
- };
-
-+&pcie1 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ };
-+};
-+
-+&pcie2 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ };
-+};
-+
- &sdhci {
- pinctrl-names = "default";
- pinctrl-0 = <&sdhci_pins>;
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -223,12 +223,100 @@
- pcie@2,0 {
- /* Port 0, Lane 1 */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,5ghz = <0>;
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ FCC =
-+ <1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>;
-+
-+ ETSI =
-+ <1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
- };
-
- /* Second mini-PCIe port */
- pcie@3,0 {
- /* Port 0, Lane 3 */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,2ghz = <0>;
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ FCC =
-+ <36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>;
-+
-+ ETSI =
-+ <36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>;
-+ };
-+ };
- };
- };
-
+++ /dev/null
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -237,12 +237,10 @@
- };
-
- &i2c0 {
-- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11000 0x100>;
- };
-
- &i2c1 {
-- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11100 0x100>;
- };
-
+++ /dev/null
---- a/arch/arm/boot/dts/armada-388-rd.dts
-+++ b/arch/arm/boot/dts/armada-388-rd.dts
-@@ -103,6 +103,16 @@
- compatible = "st,m25p128", "jedec,spi-nor";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <108000000>;
-+
-+ partition@0 {
-+ label = "uboot";
-+ reg = <0 0x400000>;
-+ };
-+
-+ partition@1 {
-+ label = "firmware";
-+ reg = <0x400000 0xc00000>;
-+ };
- };
- };
-
+++ /dev/null
-From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Tue, 13 Jan 2015 11:14:09 +0100
-Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/armada-385-db-ap.dts | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/armada-385-db-ap.dts
-+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
-@@ -218,19 +218,19 @@
- #size-cells = <1>;
-
- partition@0 {
-- label = "U-Boot";
-+ label = "u-boot";
- reg = <0x00000000 0x00800000>;
- read-only;
- };
-
- partition@800000 {
-- label = "uImage";
-+ label = "kernel";
- reg = <0x00800000 0x00400000>;
- read-only;
- };
-
- partition@c00000 {
-- label = "Root";
-+ label = "ubi";
- reg = <0x00c00000 0x3f400000>;
- };
- };
+++ /dev/null
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -483,3 +483,7 @@
- };
- };
- };
-+
-+&coherencyfab {
-+ broken-idle;
-+};
+++ /dev/null
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -385,7 +385,7 @@
-
- port@4 {
- reg = <4>;
-- label = "internet";
-+ label = "wan";
- };
-
- port@5 {
+++ /dev/null
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -14,6 +14,13 @@
- compatible = "linksys,armada385", "marvell,armada385",
- "marvell,armada380";
-
-+ aliases {
-+ led-boot = &led_power;
-+ led-failsafe = &led_power;
-+ led-running = &led_power;
-+ led-upgrade = &led_power;
-+ };
-+
- chosen {
- stdout-path = "serial0:115200n8";
- };
-@@ -71,7 +78,7 @@
- pinctrl-0 = <&gpio_leds_pins>;
- pinctrl-names = "default";
-
-- power {
-+ led_power: power {
- gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -26,6 +26,13 @@
- compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
- "marvell,armadaxp", "marvell,armada-370-xp";
-
-+ aliases {
-+ led-boot = &led_power;
-+ led-failsafe = &led_power;
-+ led-running = &led_power;
-+ led-upgrade = &led_power;
-+ };
-+
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &uart0;
-@@ -195,7 +202,7 @@
- pinctrl-0 = <&power_led_pin>;
- pinctrl-names = "default";
-
-- power {
-+ led_power: power {
- label = "mamba:white:power";
- gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- default-state = "on";
+++ /dev/null
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -116,7 +116,7 @@
- };
-
- ð2 {
-- status = "okay";
-+ status = "disabled";
- phy-mode = "sgmii";
- buffer-manager = <&bm>;
- bm,pool-long = <2>;
-@@ -200,10 +200,10 @@
- label = "wan";
- };
-
-- port@5 {
-- reg = <5>;
-+ port@6 {
-+ reg = <6>;
- label = "cpu";
-- ethernet = <ð2>;
-+ ethernet = <ð0>;
-
- fixed-link {
- speed = <1000>;
+++ /dev/null
---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
-@@ -12,8 +12,8 @@
-
- / {
- model = "Linksys WRT3200ACM";
-- compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
-- "marvell,armada380";
-+ compatible = "linksys,wrt3200acm", "linksys,rango", "linksys,armada385",
-+ "marvell,armada385", "marvell,armada380";
- };
-
- &expander0 {
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -22,9 +22,10 @@
- #include "armada-xp-mv78230.dtsi"
-
- / {
-- model = "Linksys WRT1900AC";
-- compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
-- "marvell,armadaxp", "marvell,armada-370-xp";
-+ model = "Linksys WRT1900AC v1";
-+ compatible = "linksys,wrt1900ac-v1", "linksys,mamba",
-+ "marvell,armadaxp-mv78230", "marvell,armadaxp",
-+ "marvell,armada-370-xp";
-
- aliases {
- led-boot = &led_power;
---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-@@ -9,8 +9,9 @@
- #include "armada-385-linksys.dtsi"
-
- / {
-- model = "Linksys WRT1900ACv2";
-- compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
-+ model = "Linksys WRT1900AC v2";
-+ compatible = "linksys,wrt1900ac-v2", "linksys,cobra",
-+ "linksys,armada385", "marvell,armada385",
- "marvell,armada380";
- };
-
---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-@@ -10,8 +10,8 @@
-
- / {
- model = "Linksys WRT1200AC";
-- compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
-- "marvell,armada380";
-+ compatible = "linksys,wrt1200ac", "linksys,caiman", "linksys,armada385",
-+ "marvell,armada385", "marvell,armada380";
- };
-
- &expander0 {
---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-@@ -10,7 +10,8 @@
-
- / {
- model = "Linksys WRT1900ACS";
-- compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
-+ compatible = "linksys,wrt1900acs", "linksys,shelby",
-+ "linksys,armada385", "marvell,armada385",
- "marvell,armada380";
- };
-
+++ /dev/null
-From 8137da20701c776ad3481115305a5e8e410871ba Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 29 Nov 2016 10:15:45 +0000
-Subject: ARM: dts: armada388-clearfog: emmc on clearfog base
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- .../arm/boot/dts/armada-388-clearfog-base.dts | 1 +
- .../armada-38x-solidrun-microsom-emmc.dtsi | 62 +++++++++++++++++++
- 2 files changed, 63 insertions(+)
- create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
-
---- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
-+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
-@@ -7,6 +7,7 @@
-
- /dts-v1/;
- #include "armada-388-clearfog.dtsi"
-+#include "armada-38x-solidrun-microsom-emmc.dtsi"
-
- / {
- model = "SolidRun Clearfog Base A1";
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
-@@ -0,0 +1,62 @@
-+/*
-+ * Device Tree file for SolidRun Armada 38x Microsom add-on for eMMC
-+ *
-+ * Copyright (C) 2015 Russell King
-+ *
-+ * This board is in development; the contents of this file work with
-+ * the A1 rev 2.0 of the board, which does not represent final
-+ * production board. Things will change, don't expect this file to
-+ * remain compatible info the future.
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+/ {
-+ soc {
-+ internal-regs {
-+ sdhci@d8000 {
-+ bus-width = <4>;
-+ no-1-8-v;
-+ non-removable;
-+ pinctrl-0 = <µsom_sdhci_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ wp-inverted;
-+ };
-+ };
-+ };
-+};
+++ /dev/null
---- a/arch/arm/boot/dts/armada-388-helios4.dts
-+++ b/arch/arm/boot/dts/armada-388-helios4.dts
-@@ -15,6 +15,13 @@
- model = "Helios4";
- compatible = "kobol,helios4", "marvell,armada388",
- "marvell,armada385", "marvell,armada380";
-+
-+ aliases {
-+ led-boot = &led_status;
-+ led-failsafe = &led_status;
-+ led-running = &led_status;
-+ led-upgrade = &led_status;
-+ };
-
- memory {
- device_type = "memory";
-@@ -73,10 +80,9 @@
- pinctrl-names = "default";
- pinctrl-0 = <&helios_system_led_pins>;
-
-- status-led {
-+ led_status: status-led {
- label = "helios4:green:status";
- gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "heartbeat";
- default-state = "on";
- };
-
+++ /dev/null
-From: Tomasz Maciej Nowak <tmn505@gmail.com>
-Date: Fri, 7 Jul 2023 19:06:05 +0200
-Subject: [PATCH] arm64: dts: marvell: enable heartbeat LED by default
-
-Some boards could be placed in an enclosure, so enable LED18 by default,
-since that'll be the only visible indicator that the board is operating.
-
-Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
----
- arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
-@@ -25,6 +25,7 @@
- function = LED_FUNCTION_HEARTBEAT;
- color = <LED_COLOR_ID_GREEN>;
- linux,default-trigger = "heartbeat";
-+ default-state = "on";
- };
- };
- };
+++ /dev/null
-From 258233f00bcd013050efee00c5d9128ef8cd62dd Mon Sep 17 00:00:00 2001
-From: Tad <tad@spotco.us>
-Date: Fri, 5 Feb 2021 22:32:11 -0500
-Subject: [PATCH] ARM: dts: armada-xp-linksys-mamba: Increase kernel
- partition to 4MB
-
-Signed-off-by: Tad Davanzo <tad@spotco.us>
----
- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -454,9 +454,9 @@
- reg = <0xa00000 0x2800000>; /* 40MB */
- };
-
-- partition@d00000 {
-+ partition@e00000 {
- label = "rootfs1";
-- reg = <0xd00000 0x2500000>; /* 37MB */
-+ reg = <0xe00000 0x2400000>; /* 36MB */
- };
-
- /* kernel2 overlaps with rootfs2 by design */
-@@ -465,9 +465,9 @@
- reg = <0x3200000 0x2800000>; /* 40MB */
- };
-
-- partition@3500000 {
-+ partition@3600000 {
- label = "rootfs2";
-- reg = <0x3500000 0x2500000>; /* 37MB */
-+ reg = <0x3600000 0x2400000>; /* 36MB */
- };
-
- /*
+++ /dev/null
---- a/arch/arm/boot/dts/armada-370.dtsi
-+++ b/arch/arm/boot/dts/armada-370.dtsi
-@@ -254,7 +254,7 @@
- clocks = <&gateclk 23>;
- clock-names = "cesa0";
- marvell,crypto-srams = <&crypto_sram>;
-- marvell,crypto-sram-size = <0x7e0>;
-+ marvell,crypto-sram-size = <0x800>;
- };
- };
-
-@@ -275,12 +275,17 @@
- * cpuidle workaround.
- */
- idle-sram@0 {
-+ status = "disabled";
- reg = <0x0 0x20>;
- };
- };
- };
- };
-
-+&coherencyfab {
-+ broken-idle;
-+};
-+
- /*
- * Default UART pinctrl setting without RTS/CTS, can be overwritten on
- * board level if a different configuration is used.
+++ /dev/null
---- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
-+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
-@@ -31,6 +31,7 @@
-
- chosen {
- stdout-path = "serial0:115200n8";
-+ append-rootblock = "nullparameter="; /* override the bootloader args */
- };
-
- memory@0 {
-@@ -94,6 +95,8 @@
- status = "okay";
- phy = <&phy1>;
- phy-mode = "sgmii";
-+ nvmem-cells = <&macaddr_vendor_0>;
-+ nvmem-cell-names = "mac-address";
- };
-
- sata@a0000 {
-@@ -175,6 +178,24 @@
- gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
- };
- };
-+
-+ virtual_flash {
-+ compatible = "mtd-concat";
-+
-+ devices = <&mtd_kernel &mtd_gap &mtd_gap2>;
-+
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ compatible = "openwrt,uimage", "denx,uimage";
-+ label = "firmware";
-+ reg = <0x0 0x0>;
-+ };
-+ };
-+ };
- };
-
- &mdio {
-@@ -265,48 +286,52 @@
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <20000000>;
-
-- /*
-- * Warning!
-- *
-- * Synology u-boot uses its compiled-in environment
-- * and it seems Synology did not care to change u-boot
-- * default configuration in order to allow saving a
-- * modified environment at a sensible location. So,
-- * if you do a 'saveenv' under u-boot, your modified
-- * environment will be saved at 1MB after the start
-- * of the flash, i.e. in the middle of the uImage.
-- * For that reason, it is strongly advised not to
-- * change the default environment, unless you know
-- * what you are doing.
-- */
-- partition@0 { /* u-boot */
-- label = "RedBoot";
-- reg = <0x00000000 0x000c0000>; /* 768KB */
-- };
-+ partitions {
-+ compatible = "fixed-partitions";
-
-- partition@c0000 { /* uImage */
-- label = "zImage";
-- reg = <0x000c0000 0x002d0000>; /* 2880KB */
-- };
-+ partition@0 { /* u-boot */
-+ label = "u-boot";
-+ reg = <0x00000000 0x000c0000>; /* 768KB */
-+ read-only;
-+ };
-
-- partition@390000 { /* uInitramfs */
-- label = "rd.gz";
-- reg = <0x00390000 0x00440000>; /* 4250KB */
-- };
-+ mtd_gap: partition@c0000 { /* gap */
-+ label = "gap";
-+ reg = <0x000c0000 0x00040000>; /* 256KB */
-+ };
-
-- partition@7d0000 { /* MAC address and serial number */
-- label = "vendor";
-- reg = <0x007d0000 0x00010000>; /* 64KB */
-- };
-+ partition@100000 { /* u-boot-env */
-+ label = "u-boot-env";
-+ reg = <0x00100000 0x00010000>; /* 64KB */
-+ };
-
-- partition@7e0000 {
-- label = "RedBoot config";
-- reg = <0x007e0000 0x00010000>; /* 64KB */
-- };
-+ mtd_kernel: partition@110000 {
-+ label = "kernel";
-+ reg = <0x00110000 0x006c0000>; /* 6912KB */
-+ };
-
-- partition@7f0000 {
-- label = "FIS directory";
-- reg = <0x007f0000 0x00010000>; /* 64KB */
-+ partition@7d0000 { /* MAC address and serial number */
-+ reg = <0x007d0000 0x00010000>; /* 64KB */
-+ label = "vendor";
-+ read-only;
-+
-+ compatible = "nvmem-cells";
-+
-+ nvmem-layout {
-+ compatible = "fixed-layout";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ macaddr_vendor_0: macaddr@0 {
-+ reg = <0x0 0x6>;
-+ };
-+ };
-+ };
-+
-+ mtd_gap2: partition@7e0000 {
-+ label = "gap2";
-+ reg = <0x007e0000 0x00020000>; /* 128KB */
-+ };
- };
- };
- };
+++ /dev/null
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/drivers/mtd/parsers/ofpart_core.c
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -38,6 +38,8 @@ static bool node_has_compatible(struct d
- return of_get_property(pp, "compatible", NULL);
- }
-
-+static int mangled_rootblock;
-+
- static int parse_fixed_partitions(struct mtd_info *master,
- const struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
-@@ -48,6 +50,7 @@ static int parse_fixed_partitions(struct
- struct device_node *mtd_node;
- struct device_node *ofpart_node;
- const char *partname;
-+ const char *owrtpart = "ubi";
- struct device_node *pp;
- int nr_parts, i, ret = 0;
- bool dedicated = true;
-@@ -152,9 +155,13 @@ static int parse_fixed_partitions(struct
- parts[i].size = of_read_number(reg + a_cells, s_cells);
- parts[i].of_node = pp;
-
-- partname = of_get_property(pp, "label", &len);
-- if (!partname)
-- partname = of_get_property(pp, "name", &len);
-+ if (mangled_rootblock && (i == mangled_rootblock)) {
-+ partname = owrtpart;
-+ } else {
-+ partname = of_get_property(pp, "label", &len);
-+ if (!partname)
-+ partname = of_get_property(pp, "name", &len);
-+ }
- parts[i].name = partname;
-
- if (of_get_property(pp, "read-only", &len))
-@@ -271,6 +278,18 @@ static int __init ofpart_parser_init(voi
- return 0;
- }
-
-+static int __init active_root(char *str)
-+{
-+ get_option(&str, &mangled_rootblock);
-+
-+ if (!mangled_rootblock)
-+ return 1;
-+
-+ return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- deregister_mtd_parser(&ofpart_parser);
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mvneta: tx queue workaround
-
-The hardware queue scheduling is apparently configured with fixed
-priorities, which creates a nasty fairness issue where traffic from one
-CPU can starve traffic from all other CPUs.
-
-Work around this issue by forcing all tx packets to go through one CPU,
-until this issue is fixed properly.
-
-Ref: https://github.com/openwrt/openwrt/issues/5411
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -5233,6 +5233,16 @@ static int mvneta_setup_tc(struct net_de
- }
- }
-
-+#ifndef CONFIG_ARM64
-+static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb,
-+ struct net_device *sb_dev)
-+{
-+ /* XXX: hardware queue scheduling is broken,
-+ * use only one queue until it is fixed */
-+ return 0;
-+}
-+#endif
-+
- static const struct net_device_ops mvneta_netdev_ops = {
- .ndo_open = mvneta_open,
- .ndo_stop = mvneta_stop,
-@@ -5243,6 +5253,9 @@ static const struct net_device_ops mvnet
- .ndo_fix_features = mvneta_fix_features,
- .ndo_get_stats64 = mvneta_get_stats64,
- .ndo_eth_ioctl = mvneta_ioctl,
-+#ifndef CONFIG_ARM64
-+ .ndo_select_queue = mvneta_select_queue,
-+#endif
- .ndo_bpf = mvneta_xdp,
- .ndo_xdp_xmit = mvneta_xdp_xmit,
- .ndo_setup_tc = mvneta_setup_tc,
+++ /dev/null
-From: Tobias Schramm <tobias@t-sys.eu>
-Subject: mvpp2: support fetching mac address from nvmem
-
-The mvpp2 driver did not query nvmem for hardware mac addresses. This
-patch adds querying of mac addresses stored in nvmem cells as a further
-fallback option before assigning a random address.
-Purposely added separately to fwnode_get_mac_address() above to maintain
-existing behaviour with builtin adapter mac address still taking
-precedence.
-
-Signed-off-by: Tobias Schramm <tobias@t-sys.eu>
----
---- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
-+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
-@@ -6134,6 +6134,12 @@ static void mvpp2_port_copy_mac_addr(str
- }
- }
-
-+ if (!of_get_mac_address(to_of_node(fwnode), hw_mac_addr)) {
-+ *mac_from = "nvmem cell";
-+ eth_hw_addr_set(dev, hw_mac_addr);
-+ return;
-+ }
-+
- *mac_from = "random";
- eth_hw_addr_random(dev);
- }
+++ /dev/null
-From c28b2d367da8a471482e6a4aa8337ab6369a80c2 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@arm.linux.org.uk>
-Date: Sat, 3 Oct 2015 09:13:05 +0100
-Subject: cpuidle: mvebu: indicate failure to enter deeper sleep states
-
-The cpuidle ->enter method expects the return value to be the sleep
-state we entered. Returning negative numbers or other codes is not
-permissible since coupled CPU idle was merged.
-
-At least some of the mvebu_v7_cpu_suspend() implementations return the
-value from cpu_suspend(), which returns zero if the CPU vectors back
-into the kernel via cpu_resume() (the success case), or the non-zero
-return value of the suspend actor, or one (failure cases).
-
-We do not want to be returning the failure case value back to CPU idle
-as that indicates that we successfully entered one of the deeper idle
-states. Always return zero instead, indicating that we slept for the
-shortest amount of time.
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- drivers/cpuidle/cpuidle-mvebu-v7.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/cpuidle/cpuidle-mvebu-v7.c
-+++ b/drivers/cpuidle/cpuidle-mvebu-v7.c
-@@ -39,8 +39,12 @@ static int mvebu_v7_enter_idle(struct cp
- ret = mvebu_v7_cpu_suspend(deepidle);
- cpu_pm_exit();
-
-+ /*
-+ * If we failed to enter the desired state, indicate that we
-+ * slept lightly.
-+ */
- if (ret)
-- return ret;
-+ return 0;
-
- return index;
- }
+++ /dev/null
-From 287b9df160b6159f8d385424904f8bac501280c1 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sat, 9 Jul 2016 10:58:16 +0100
-Subject: pci: mvebu: time out reset on link up
-
-If the port reports that the link is up while we are resetting, there's
-little point in waiting for the full duration.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/pci/controller/pci-mvebu.c | 20 ++++++++++++++------
- 1 file changed, 14 insertions(+), 6 deletions(-)
-
---- a/drivers/pci/controller/pci-mvebu.c
-+++ b/drivers/pci/controller/pci-mvebu.c
-@@ -1414,6 +1414,7 @@ static int mvebu_pcie_powerup(struct mve
-
- if (port->reset_gpio) {
- u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
-+ unsigned int i;
-
- of_property_read_u32(port->dn, "reset-delay-us",
- &reset_udelay);
-@@ -1421,7 +1422,13 @@ static int mvebu_pcie_powerup(struct mve
- udelay(100);
-
- gpiod_set_value_cansleep(port->reset_gpio, 0);
-- msleep(reset_udelay / 1000);
-+ for (i = 0; i < reset_udelay; i += 1000) {
-+ if (mvebu_pcie_link_up(port))
-+ break;
-+ msleep(1);
-+ }
-+
-+ printk("%s: reset completed in %dus\n", port->name, i);
- }
-
- return 0;
-@@ -1538,15 +1545,16 @@ static int mvebu_pcie_probe(struct platf
- if (!child)
- continue;
-
-- ret = mvebu_pcie_powerup(port);
-- if (ret < 0)
-- continue;
--
- port->base = mvebu_pcie_map_registers(pdev, child, port);
- if (IS_ERR(port->base)) {
- dev_err(dev, "%s: cannot map registers\n", port->name);
- port->base = NULL;
-- mvebu_pcie_powerdown(port);
-+ continue;
-+ }
-+
-+ ret = mvebu_pcie_powerup(port);
-+ if (ret < 0) {
-+ port->base = NULL;
- continue;
- }
-
+++ /dev/null
-From aa4a0ccc41997f2da172165c92803abace43bd1c Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:32 +0000
-Subject: [PATCH 1/7] dt-bindings: Add IEI vendor prefix and IEI WT61P803
- PUZZLE driver bindings
-
-Add the IEI WT61P803 PUZZLE Device Tree bindings for MFD, HWMON and LED
-drivers. A new vendor prefix is also added accordingly for
-IEI Integration Corp.
-
-Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
-Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Cc: Robert Marko <robert.marko@sartura.hr>
----
- .../hwmon/iei,wt61p803-puzzle-hwmon.yaml | 53 ++++++++++++
- .../leds/iei,wt61p803-puzzle-leds.yaml | 39 +++++++++
- .../bindings/mfd/iei,wt61p803-puzzle.yaml | 82 +++++++++++++++++++
- .../devicetree/bindings/vendor-prefixes.yaml | 2 +
- 4 files changed, 176 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
- create mode 100644 Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
- create mode 100644 Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
-@@ -0,0 +1,53 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/hwmon/iei,wt61p803-puzzle-hwmon.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: IEI WT61P803 PUZZLE MCU HWMON module from IEI Integration Corp.
-+
-+maintainers:
-+ - Luka Kovacic <luka.kovacic@sartura.hr>
-+
-+description: |
-+ This module is a part of the IEI WT61P803 PUZZLE MFD device. For more details
-+ see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
-+
-+ The HWMON module is a sub-node of the MCU node in the Device Tree.
-+
-+properties:
-+ compatible:
-+ const: iei,wt61p803-puzzle-hwmon
-+
-+ "#address-cells":
-+ const: 1
-+
-+ "#size-cells":
-+ const: 0
-+
-+patternProperties:
-+ "^fan-group@[0-1]$":
-+ type: object
-+ properties:
-+ reg:
-+ minimum: 0
-+ maximum: 1
-+ description:
-+ Fan group ID
-+
-+ cooling-levels:
-+ minItems: 1
-+ maxItems: 255
-+ description:
-+ Cooling levels for the fans (PWM value mapping)
-+ description: |
-+ Properties for each fan group.
-+ required:
-+ - reg
-+
-+required:
-+ - compatible
-+ - "#address-cells"
-+ - "#size-cells"
-+
-+additionalProperties: false
---- /dev/null
-+++ b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
-@@ -0,0 +1,39 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/leds/iei,wt61p803-puzzle-leds.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: IEI WT61P803 PUZZLE MCU LED module from IEI Integration Corp.
-+
-+maintainers:
-+ - Luka Kovacic <luka.kovacic@sartura.hr>
-+
-+description: |
-+ This module is a part of the IEI WT61P803 PUZZLE MFD device. For more details
-+ see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
-+
-+ The LED module is a sub-node of the MCU node in the Device Tree.
-+
-+properties:
-+ compatible:
-+ const: iei,wt61p803-puzzle-leds
-+
-+ "#address-cells":
-+ const: 1
-+
-+ "#size-cells":
-+ const: 0
-+
-+ led@0:
-+ type: object
-+ $ref: common.yaml
-+ description: |
-+ Properties for a single LED.
-+
-+required:
-+ - compatible
-+ - "#address-cells"
-+ - "#size-cells"
-+
-+additionalProperties: false
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
-@@ -0,0 +1,82 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mfd/iei,wt61p803-puzzle.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: IEI WT61P803 PUZZLE MCU from IEI Integration Corp.
-+
-+maintainers:
-+ - Luka Kovacic <luka.kovacic@sartura.hr>
-+
-+description: |
-+ IEI WT61P803 PUZZLE MCU is embedded in some IEI Puzzle series boards.
-+ It's used for controlling system power states, fans, LEDs and temperature
-+ sensors.
-+
-+ For Device Tree bindings of other sub-modules (HWMON, LEDs) refer to the
-+ binding documents under the respective subsystem directories.
-+
-+properties:
-+ compatible:
-+ const: iei,wt61p803-puzzle
-+
-+ current-speed:
-+ description:
-+ Serial bus speed in bps
-+ maxItems: 1
-+
-+ enable-beep: true
-+
-+ hwmon:
-+ $ref: /schemas/hwmon/iei,wt61p803-puzzle-hwmon.yaml
-+
-+ leds:
-+ $ref: /schemas/leds/iei,wt61p803-puzzle-leds.yaml
-+
-+required:
-+ - compatible
-+ - current-speed
-+
-+additionalProperties: false
-+
-+examples:
-+ - |
-+ #include <dt-bindings/leds/common.h>
-+ serial {
-+ mcu {
-+ compatible = "iei,wt61p803-puzzle";
-+ current-speed = <115200>;
-+ enable-beep;
-+
-+ leds {
-+ compatible = "iei,wt61p803-puzzle-leds";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ led@0 {
-+ reg = <0>;
-+ function = LED_FUNCTION_POWER;
-+ color = <LED_COLOR_ID_BLUE>;
-+ };
-+ };
-+
-+ hwmon {
-+ compatible = "iei,wt61p803-puzzle-hwmon";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ fan-group@0 {
-+ #cooling-cells = <2>;
-+ reg = <0x00>;
-+ cooling-levels = <64 102 170 230 250>;
-+ };
-+
-+ fan-group@1 {
-+ #cooling-cells = <2>;
-+ reg = <0x01>;
-+ cooling-levels = <64 102 170 230 250>;
-+ };
-+ };
-+ };
-+ };
---- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
-+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
-@@ -579,6 +579,8 @@ patternProperties:
- description: IC Plus Corp.
- "^idt,.*":
- description: Integrated Device Technologies, Inc.
-+ "^iei,.*":
-+ description: IEI Integration Corp.
- "^ifi,.*":
- description: Ingenieurburo Fur Ic-Technologie (I/F/I)
- "^ilitek,.*":
+++ /dev/null
-From 692cfa85272dd12995b427c0a7a585ced5d54f32 Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:33 +0000
-Subject: [PATCH 2/7] drivers: mfd: Add a driver for IEI WT61P803 PUZZLE MCU
-
-Add a driver for the IEI WT61P803 PUZZLE microcontroller, used in some
-IEI Puzzle series devices. The microcontroller controls system power,
-temperature sensors, fans and LEDs.
-
-This driver implements the core functionality for device communication
-over the system serial (serdev bus). It handles MCU messages and the
-internal MCU properties. Some properties can be managed over sysfs.
-
-Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
-Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Cc: Robert Marko <robert.marko@sartura.hr>
----
- drivers/mfd/Kconfig | 9 +
- drivers/mfd/Makefile | 1 +
- drivers/mfd/iei-wt61p803-puzzle.c | 908 ++++++++++++++++++++++++
- include/linux/mfd/iei-wt61p803-puzzle.h | 66 ++
- 4 files changed, 984 insertions(+)
- create mode 100644 drivers/mfd/iei-wt61p803-puzzle.c
- create mode 100644 include/linux/mfd/iei-wt61p803-puzzle.h
-
---- a/drivers/mfd/Kconfig
-+++ b/drivers/mfd/Kconfig
-@@ -2222,6 +2222,15 @@ config SGI_MFD_IOC3
- If you have an SGI Origin, Octane, or a PCI IOC3 card,
- then say Y. Otherwise say N.
-
-+config MFD_IEI_WT61P803_PUZZLE
-+ tristate "IEI WT61P803 PUZZLE MCU driver"
-+ depends on SERIAL_DEV_BUS
-+ select MFD_CORE
-+ help
-+ IEI WT61P803 PUZZLE is a system power management microcontroller
-+ used for fan control, temperature sensor reading, LED control
-+ and system identification.
-+
- config MFD_INTEL_M10_BMC
- tristate "Intel MAX 10 Board Management Controller"
- depends on SPI_MASTER
---- a/drivers/mfd/Makefile
-+++ b/drivers/mfd/Makefile
-@@ -244,6 +244,7 @@ obj-$(CONFIG_MFD_RT4831) += rt4831.o
- obj-$(CONFIG_MFD_RT5033) += rt5033.o
- obj-$(CONFIG_MFD_RT5120) += rt5120.o
- obj-$(CONFIG_MFD_SKY81452) += sky81452.o
-+obj-$(CONFIG_MFD_IEI_WT61P803_PUZZLE) += iei-wt61p803-puzzle.o
-
- obj-$(CONFIG_INTEL_SOC_PMIC) += intel_soc_pmic_crc.o
- obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o
---- /dev/null
-+++ b/drivers/mfd/iei-wt61p803-puzzle.c
-@@ -0,0 +1,908 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* IEI WT61P803 PUZZLE MCU Driver
-+ * System management microcontroller for fan control, temperature sensor reading,
-+ * LED control and system identification on IEI Puzzle series ARM-based appliances.
-+ *
-+ * Copyright (C) 2020 Sartura Ltd.
-+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
-+ */
-+
-+#include <linux/atomic.h>
-+#include <linux/delay.h>
-+#include <linux/export.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/mfd/core.h>
-+#include <linux/mfd/iei-wt61p803-puzzle.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/property.h>
-+#include <linux/sched.h>
-+#include <linux/serdev.h>
-+#include <linux/slab.h>
-+#include <linux/sysfs.h>
-+#include <asm/unaligned.h>
-+
-+/* start, payload and XOR checksum at end */
-+#define IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH (1 + 20 + 1)
-+#define IEI_WT61P803_PUZZLE_RESP_BUF_SIZE 512
-+
-+#define IEI_WT61P803_PUZZLE_MAC_LENGTH 17
-+#define IEI_WT61P803_PUZZLE_SN_LENGTH 36
-+#define IEI_WT61P803_PUZZLE_VERSION_LENGTH 6
-+#define IEI_WT61P803_PUZZLE_BUILD_INFO_LENGTH 16
-+#define IEI_WT61P803_PUZZLE_PROTOCOL_VERSION_LENGTH 8
-+#define IEI_WT61P803_PUZZLE_NB_MAC 8
-+
-+/* Use HZ as a timeout value throughout the driver */
-+#define IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT HZ
-+
-+enum iei_wt61p803_puzzle_attribute_type {
-+ IEI_WT61P803_PUZZLE_VERSION,
-+ IEI_WT61P803_PUZZLE_BUILD_INFO,
-+ IEI_WT61P803_PUZZLE_BOOTLOADER_MODE,
-+ IEI_WT61P803_PUZZLE_PROTOCOL_VERSION,
-+ IEI_WT61P803_PUZZLE_SERIAL_NUMBER,
-+ IEI_WT61P803_PUZZLE_MAC_ADDRESS,
-+ IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS,
-+ IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY,
-+ IEI_WT61P803_PUZZLE_POWER_STATUS,
-+};
-+
-+struct iei_wt61p803_puzzle_device_attribute {
-+ struct device_attribute dev_attr;
-+ enum iei_wt61p803_puzzle_attribute_type type;
-+ u8 index;
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle_mcu_status - MCU flags state
-+ * @ac_recovery_status_flag: AC Recovery Status Flag
-+ * @power_loss_recovery: System recovery after power loss
-+ * @power_status: System Power-on Method
-+ */
-+struct iei_wt61p803_puzzle_mcu_status {
-+ u8 ac_recovery_status_flag;
-+ u8 power_loss_recovery;
-+ u8 power_status;
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle_reply - MCU reply
-+ * @size: Size of the MCU reply
-+ * @data: Full MCU reply buffer
-+ * @state: Current state of the packet
-+ * @received: Was the response fullfilled
-+ */
-+struct iei_wt61p803_puzzle_reply {
-+ size_t size;
-+ unsigned char data[IEI_WT61P803_PUZZLE_RESP_BUF_SIZE];
-+ struct completion received;
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle_mcu_version - MCU version status
-+ * @version: Primary firmware version
-+ * @build_info: Build date and time
-+ * @bootloader_mode: Status of the MCU operation
-+ * @protocol_version: MCU communication protocol version
-+ * @serial_number: Device factory serial number
-+ * @mac_address: Device factory MAC addresses
-+ *
-+ * Last element of arrays is reserved for '\0'.
-+ */
-+struct iei_wt61p803_puzzle_mcu_version {
-+ char version[IEI_WT61P803_PUZZLE_VERSION_LENGTH + 1];
-+ char build_info[IEI_WT61P803_PUZZLE_BUILD_INFO_LENGTH + 1];
-+ bool bootloader_mode;
-+ char protocol_version[IEI_WT61P803_PUZZLE_PROTOCOL_VERSION_LENGTH + 1];
-+ char serial_number[IEI_WT61P803_PUZZLE_SN_LENGTH + 1];
-+ char mac_address[IEI_WT61P803_PUZZLE_NB_MAC][IEI_WT61P803_PUZZLE_MAC_LENGTH + 1];
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle - IEI WT61P803 PUZZLE MCU Driver
-+ * @serdev: Pointer to underlying serdev device
-+ * @dev: Pointer to underlying dev device
-+ * @reply_lock: Reply mutex lock
-+ * @reply: Pointer to the iei_wt61p803_puzzle_reply struct
-+ * @version: MCU version related data
-+ * @status: MCU status related data
-+ * @response_buffer Command response buffer allocation
-+ * @lock General member mutex lock
-+ */
-+struct iei_wt61p803_puzzle {
-+ struct serdev_device *serdev;
-+ struct device *dev;
-+ struct mutex reply_lock; /* lock to prevent multiple firmware calls */
-+ struct iei_wt61p803_puzzle_reply *reply;
-+ struct iei_wt61p803_puzzle_mcu_version version;
-+ struct iei_wt61p803_puzzle_mcu_status status;
-+ unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
-+ struct mutex lock; /* lock to protect response buffer */
-+};
-+
-+static unsigned char iei_wt61p803_puzzle_checksum(unsigned char *buf, size_t len)
-+{
-+ unsigned char checksum = 0;
-+ size_t i;
-+
-+ for (i = 0; i < len; i++)
-+ checksum ^= buf[i];
-+ return checksum;
-+}
-+
-+static int iei_wt61p803_puzzle_process_resp(struct iei_wt61p803_puzzle *mcu,
-+ const unsigned char *raw_resp_data, size_t size)
-+{
-+ unsigned char checksum;
-+
-+ /* Check the incoming frame header */
-+ if (!(raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START ||
-+ raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER ||
-+ (raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM &&
-+ raw_resp_data[1] == IEI_WT61P803_PUZZLE_CMD_EEPROM_READ))) {
-+ if (mcu->reply->size + size >= sizeof(mcu->reply->data))
-+ return -EIO;
-+
-+ /* Append the frame to existing data */
-+ memcpy(mcu->reply->data + mcu->reply->size, raw_resp_data, size);
-+ mcu->reply->size += size;
-+ } else {
-+ if (size >= sizeof(mcu->reply->data))
-+ return -EIO;
-+
-+ /* Start processing a new frame */
-+ memcpy(mcu->reply->data, raw_resp_data, size);
-+ mcu->reply->size = size;
-+ }
-+
-+ checksum = iei_wt61p803_puzzle_checksum(mcu->reply->data, mcu->reply->size - 1);
-+ if (checksum != mcu->reply->data[mcu->reply->size - 1]) {
-+ /* The checksum isn't matched yet, wait for new frames */
-+ return size;
-+ }
-+
-+ /* Received all the data */
-+ complete(&mcu->reply->received);
-+
-+ return size;
-+}
-+
-+static int iei_wt61p803_puzzle_recv_buf(struct serdev_device *serdev,
-+ const unsigned char *data, size_t size)
-+{
-+ struct iei_wt61p803_puzzle *mcu = serdev_device_get_drvdata(serdev);
-+ int ret;
-+
-+ ret = iei_wt61p803_puzzle_process_resp(mcu, data, size);
-+ /* Return the number of processed bytes if function returns error,
-+ * discard the remaining incoming data, since the frame this data
-+ * belongs to is broken anyway
-+ */
-+ if (ret < 0)
-+ return size;
-+
-+ return ret;
-+}
-+
-+static const struct serdev_device_ops iei_wt61p803_puzzle_serdev_device_ops = {
-+ .receive_buf = iei_wt61p803_puzzle_recv_buf,
-+ .write_wakeup = serdev_device_write_wakeup,
-+};
-+
-+/**
-+ * iei_wt61p803_puzzle_write_command_watchdog() - Watchdog of the normal cmd
-+ * @mcu: Pointer to the iei_wt61p803_puzzle core MFD struct
-+ * @cmd: Pointer to the char array to send (size should be content + 1 (xor))
-+ * @size: Size of the cmd char array
-+ * @reply_data: Pointer to the reply/response data array (should be allocated)
-+ * @reply_size: Pointer to size_t (size of reply_data)
-+ * @retry_count: Number of times to retry sending the command to the MCU
-+ */
-+int iei_wt61p803_puzzle_write_command_watchdog(struct iei_wt61p803_puzzle *mcu,
-+ unsigned char *cmd, size_t size,
-+ unsigned char *reply_data,
-+ size_t *reply_size, int retry_count)
-+{
-+ struct device *dev = &mcu->serdev->dev;
-+ int ret, i;
-+
-+ for (i = 0; i < retry_count; i++) {
-+ ret = iei_wt61p803_puzzle_write_command(mcu, cmd, size,
-+ reply_data, reply_size);
-+ if (ret != -ETIMEDOUT)
-+ return ret;
-+ }
-+
-+ dev_err(dev, "Command response timed out. Retries: %d\n", retry_count);
-+
-+ return -ETIMEDOUT;
-+}
-+EXPORT_SYMBOL_GPL(iei_wt61p803_puzzle_write_command_watchdog);
-+
-+/**
-+ * iei_wt61p803_puzzle_write_command() - Send a structured command to the MCU
-+ * @mcu: Pointer to the iei_wt61p803_puzzle core MFD struct
-+ * @cmd: Pointer to the char array to send (size should be content + 1 (xor))
-+ * @size: Size of the cmd char array
-+ * @reply_data: Pointer to the reply/response data array (should be allocated)
-+ *
-+ * Sends a structured command to the MCU.
-+ */
-+int iei_wt61p803_puzzle_write_command(struct iei_wt61p803_puzzle *mcu,
-+ unsigned char *cmd, size_t size,
-+ unsigned char *reply_data,
-+ size_t *reply_size)
-+{
-+ struct device *dev = &mcu->serdev->dev;
-+ int ret;
-+
-+ if (size <= 1 || size > IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH)
-+ return -EINVAL;
-+
-+ mutex_lock(&mcu->reply_lock);
-+
-+ cmd[size - 1] = iei_wt61p803_puzzle_checksum(cmd, size - 1);
-+
-+ /* Initialize reply struct */
-+ reinit_completion(&mcu->reply->received);
-+ mcu->reply->size = 0;
-+ usleep_range(2000, 10000);
-+ serdev_device_write_flush(mcu->serdev);
-+ ret = serdev_device_write_buf(mcu->serdev, cmd, size);
-+ if (ret < 0)
-+ goto exit;
-+
-+ serdev_device_wait_until_sent(mcu->serdev, IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
-+ ret = wait_for_completion_timeout(&mcu->reply->received,
-+ IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
-+ if (ret == 0) {
-+ dev_err(dev, "Command reply receive timeout\n");
-+ ret = -ETIMEDOUT;
-+ goto exit;
-+ }
-+
-+ *reply_size = mcu->reply->size;
-+ /* Copy the received data, as it will not be available after a new frame is received */
-+ memcpy(reply_data, mcu->reply->data, mcu->reply->size);
-+ ret = 0;
-+exit:
-+ mutex_unlock(&mcu->reply_lock);
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(iei_wt61p803_puzzle_write_command);
-+
-+static int iei_wt61p803_puzzle_buzzer(struct iei_wt61p803_puzzle *mcu, bool long_beep)
-+{
-+ unsigned char *resp_buf = mcu->response_buffer;
-+ unsigned char buzzer_cmd[4] = {};
-+ size_t reply_size;
-+ int ret;
-+
-+ buzzer_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+ buzzer_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_SINGLE;
-+ buzzer_cmd[2] = long_beep ? '3' : '2'; /* Buzzer 1.5 / 0.5 second beep */
-+
-+ mutex_lock(&mcu->lock);
-+ ret = iei_wt61p803_puzzle_write_command(mcu, buzzer_cmd, sizeof(buzzer_cmd),
-+ resp_buf, &reply_size);
-+ if (ret)
-+ goto exit;
-+
-+ if (reply_size != 3) {
-+ ret = -EIO;
-+ goto exit;
-+ }
-+
-+ if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+ resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+ resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
-+ ret = -EPROTO;
-+ goto exit;
-+ }
-+exit:
-+ mutex_unlock(&mcu->lock);
-+ return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_get_version(struct iei_wt61p803_puzzle *mcu)
-+{
-+ unsigned char version_cmd[3] = {
-+ IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
-+ IEI_WT61P803_PUZZLE_CMD_OTHER_VERSION,
-+ };
-+ unsigned char build_info_cmd[3] = {
-+ IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
-+ IEI_WT61P803_PUZZLE_CMD_OTHER_BUILD,
-+ };
-+ unsigned char bootloader_mode_cmd[3] = {
-+ IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
-+ IEI_WT61P803_PUZZLE_CMD_OTHER_BOOTLOADER_MODE,
-+ };
-+ unsigned char protocol_version_cmd[3] = {
-+ IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
-+ IEI_WT61P803_PUZZLE_CMD_OTHER_PROTOCOL_VERSION,
-+ };
-+ unsigned char *rb = mcu->response_buffer;
-+ size_t reply_size;
-+ int ret;
-+
-+ mutex_lock(&mcu->lock);
-+
-+ ret = iei_wt61p803_puzzle_write_command(mcu, version_cmd, sizeof(version_cmd),
-+ rb, &reply_size);
-+ if (ret)
-+ goto err;
-+ if (reply_size < 7) {
-+ ret = -EIO;
-+ goto err;
-+ }
-+ sprintf(mcu->version.version, "v%c.%.3s", rb[2], &rb[3]);
-+
-+ ret = iei_wt61p803_puzzle_write_command(mcu, build_info_cmd,
-+ sizeof(build_info_cmd), rb,
-+ &reply_size);
-+ if (ret)
-+ goto err;
-+ if (reply_size < 15) {
-+ ret = -EIO;
-+ goto err;
-+ }
-+ sprintf(mcu->version.build_info, "%c%c/%c%c/%.4s %c%c:%c%c",
-+ rb[8], rb[9], rb[6], rb[7], &rb[2], rb[10], rb[11],
-+ rb[12], rb[13]);
-+
-+ ret = iei_wt61p803_puzzle_write_command(mcu, bootloader_mode_cmd,
-+ sizeof(bootloader_mode_cmd), rb,
-+ &reply_size);
-+ if (ret)
-+ goto err;
-+ if (reply_size < 4) {
-+ ret = -EIO;
-+ goto err;
-+ }
-+ if (rb[2] == IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_APPS)
-+ mcu->version.bootloader_mode = false;
-+ else if (rb[2] == IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_BOOTLOADER)
-+ mcu->version.bootloader_mode = true;
-+
-+ ret = iei_wt61p803_puzzle_write_command(mcu, protocol_version_cmd,
-+ sizeof(protocol_version_cmd), rb,
-+ &reply_size);
-+ if (ret)
-+ goto err;
-+ if (reply_size < 9) {
-+ ret = -EIO;
-+ goto err;
-+ }
-+ sprintf(mcu->version.protocol_version, "v%c.%c%c%c%c%c",
-+ rb[7], rb[6], rb[5], rb[4], rb[3], rb[2]);
-+err:
-+ mutex_unlock(&mcu->lock);
-+ return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_get_mcu_status(struct iei_wt61p803_puzzle *mcu)
-+{
-+ unsigned char mcu_status_cmd[5] = {
-+ IEI_WT61P803_PUZZLE_CMD_HEADER_START,
-+ IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER,
-+ IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS,
-+ IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS,
-+ };
-+ unsigned char *resp_buf = mcu->response_buffer;
-+ size_t reply_size;
-+ int ret;
-+
-+ mutex_lock(&mcu->lock);
-+ ret = iei_wt61p803_puzzle_write_command(mcu, mcu_status_cmd, sizeof(mcu_status_cmd),
-+ resp_buf, &reply_size);
-+ if (ret)
-+ goto exit;
-+ if (reply_size < 20) {
-+ ret = -EIO;
-+ goto exit;
-+ }
-+
-+ /* Response format:
-+ * (IDX RESPONSE)
-+ * 0 @
-+ * 1 O
-+ * 2 S
-+ * 3 S
-+ * ...
-+ * 5 AC Recovery Status Flag
-+ * ...
-+ * 10 Power Loss Recovery
-+ * ...
-+ * 19 Power Status (system power on method)
-+ * 20 XOR checksum
-+ */
-+ if (resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+ resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER &&
-+ resp_buf[2] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS &&
-+ resp_buf[3] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS) {
-+ mcu->status.ac_recovery_status_flag = resp_buf[5];
-+ mcu->status.power_loss_recovery = resp_buf[10];
-+ mcu->status.power_status = resp_buf[19];
-+ }
-+exit:
-+ mutex_unlock(&mcu->lock);
-+ return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_get_serial_number(struct iei_wt61p803_puzzle *mcu)
-+{
-+ unsigned char *resp_buf = mcu->response_buffer;
-+ unsigned char serial_number_cmd[5] = {
-+ IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
-+ IEI_WT61P803_PUZZLE_CMD_EEPROM_READ,
-+ 0x00, /* EEPROM read address */
-+ 0x24, /* Data length */
-+ };
-+ size_t reply_size;
-+ int ret;
-+
-+ mutex_lock(&mcu->lock);
-+ ret = iei_wt61p803_puzzle_write_command(mcu, serial_number_cmd,
-+ sizeof(serial_number_cmd),
-+ resp_buf, &reply_size);
-+ if (ret)
-+ goto err;
-+
-+ if (reply_size < IEI_WT61P803_PUZZLE_SN_LENGTH + 4) {
-+ ret = -EIO;
-+ goto err;
-+ }
-+
-+ sprintf(mcu->version.serial_number, "%.*s",
-+ IEI_WT61P803_PUZZLE_SN_LENGTH, resp_buf + 4);
-+err:
-+ mutex_unlock(&mcu->lock);
-+ return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_write_serial_number(struct iei_wt61p803_puzzle *mcu,
-+ unsigned char serial_number[36])
-+{
-+ unsigned char *resp_buf = mcu->response_buffer;
-+ unsigned char serial_number_header[4] = {
-+ IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
-+ IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE,
-+ 0x00, /* EEPROM write address */
-+ 0xC, /* Data length */
-+ };
-+ unsigned char serial_number_cmd[4 + 12 + 1]; /* header, serial number, XOR checksum */
-+ int ret, sn_counter;
-+ size_t reply_size;
-+
-+ /* The MCU can only handle 22 byte messages, send the S/N in 12 byte chunks */
-+ mutex_lock(&mcu->lock);
-+ for (sn_counter = 0; sn_counter < 3; sn_counter++) {
-+ serial_number_header[2] = 0x0 + 0xC * sn_counter;
-+
-+ memcpy(serial_number_cmd, serial_number_header, sizeof(serial_number_header));
-+ memcpy(serial_number_cmd + sizeof(serial_number_header),
-+ serial_number + 0xC * sn_counter, 0xC);
-+
-+ ret = iei_wt61p803_puzzle_write_command(mcu, serial_number_cmd,
-+ sizeof(serial_number_cmd),
-+ resp_buf, &reply_size);
-+ if (ret)
-+ goto err;
-+ if (reply_size != 3) {
-+ ret = -EIO;
-+ goto err;
-+ }
-+ if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+ resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+ resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
-+ ret = -EPROTO;
-+ goto err;
-+ }
-+ }
-+
-+ sprintf(mcu->version.serial_number, "%.*s",
-+ IEI_WT61P803_PUZZLE_SN_LENGTH, serial_number);
-+err:
-+ mutex_unlock(&mcu->lock);
-+ return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_get_mac_address(struct iei_wt61p803_puzzle *mcu, int index)
-+{
-+ unsigned char *resp_buf = mcu->response_buffer;
-+ unsigned char mac_address_cmd[5] = {
-+ IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
-+ IEI_WT61P803_PUZZLE_CMD_EEPROM_READ,
-+ 0x00, /* EEPROM read address */
-+ 0x11, /* Data length */
-+ };
-+ size_t reply_size;
-+ int ret;
-+
-+ mutex_lock(&mcu->lock);
-+ mac_address_cmd[2] = 0x24 + 0x11 * index;
-+
-+ ret = iei_wt61p803_puzzle_write_command(mcu, mac_address_cmd,
-+ sizeof(mac_address_cmd),
-+ resp_buf, &reply_size);
-+ if (ret)
-+ goto err;
-+
-+ if (reply_size < 22) {
-+ ret = -EIO;
-+ goto err;
-+ }
-+
-+ sprintf(mcu->version.mac_address[index], "%.*s",
-+ IEI_WT61P803_PUZZLE_MAC_LENGTH, resp_buf + 4);
-+err:
-+ mutex_unlock(&mcu->lock);
-+ return ret;
-+}
-+
-+static int
-+iei_wt61p803_puzzle_write_mac_address(struct iei_wt61p803_puzzle *mcu,
-+ unsigned char mac_address[IEI_WT61P803_PUZZLE_MAC_LENGTH],
-+ int mac_address_idx)
-+{
-+ unsigned char mac_address_cmd[4 + IEI_WT61P803_PUZZLE_MAC_LENGTH + 1];
-+ unsigned char *resp_buf = mcu->response_buffer;
-+ unsigned char mac_address_header[4] = {
-+ IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
-+ IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE,
-+ 0x00, /* EEPROM write address */
-+ 0x11, /* Data length */
-+ };
-+ size_t reply_size;
-+ int ret;
-+
-+ if (mac_address_idx < 0 || mac_address_idx >= IEI_WT61P803_PUZZLE_NB_MAC)
-+ return -EINVAL;
-+
-+ mac_address_header[2] = 0x24 + 0x11 * mac_address_idx;
-+
-+ /* Concat mac_address_header, mac_address to mac_address_cmd */
-+ memcpy(mac_address_cmd, mac_address_header, sizeof(mac_address_header));
-+ memcpy(mac_address_cmd + sizeof(mac_address_header), mac_address,
-+ IEI_WT61P803_PUZZLE_MAC_LENGTH);
-+
-+ mutex_lock(&mcu->lock);
-+ ret = iei_wt61p803_puzzle_write_command(mcu, mac_address_cmd,
-+ sizeof(mac_address_cmd),
-+ resp_buf, &reply_size);
-+ if (ret)
-+ goto err;
-+ if (reply_size != 3) {
-+ ret = -EIO;
-+ goto err;
-+ }
-+ if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+ resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+ resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
-+ ret = -EPROTO;
-+ goto err;
-+ }
-+
-+ sprintf(mcu->version.mac_address[mac_address_idx], "%.*s",
-+ IEI_WT61P803_PUZZLE_MAC_LENGTH, mac_address);
-+err:
-+ mutex_unlock(&mcu->lock);
-+ return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_write_power_loss_recovery(struct iei_wt61p803_puzzle *mcu,
-+ int power_loss_recovery_action)
-+{
-+ unsigned char *resp_buf = mcu->response_buffer;
-+ unsigned char power_loss_recovery_cmd[5] = {};
-+ size_t reply_size;
-+ int ret;
-+
-+ if (power_loss_recovery_action < 0 || power_loss_recovery_action > 4)
-+ return -EINVAL;
-+
-+ power_loss_recovery_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+ power_loss_recovery_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER;
-+ power_loss_recovery_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS;
-+ power_loss_recovery_cmd[3] = hex_asc[power_loss_recovery_action];
-+
-+ mutex_lock(&mcu->lock);
-+ ret = iei_wt61p803_puzzle_write_command(mcu, power_loss_recovery_cmd,
-+ sizeof(power_loss_recovery_cmd),
-+ resp_buf, &reply_size);
-+ if (ret)
-+ goto exit;
-+ mcu->status.power_loss_recovery = power_loss_recovery_action;
-+exit:
-+ mutex_unlock(&mcu->lock);
-+ return ret;
-+}
-+
-+#define to_puzzle_dev_attr(_attr) \
-+ container_of(_attr, struct iei_wt61p803_puzzle_device_attribute, dev_attr)
-+
-+static ssize_t show_output(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev);
-+ struct iei_wt61p803_puzzle_device_attribute *pattr = to_puzzle_dev_attr(attr);
-+ int ret;
-+
-+ switch (pattr->type) {
-+ case IEI_WT61P803_PUZZLE_VERSION:
-+ return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.version);
-+ case IEI_WT61P803_PUZZLE_BUILD_INFO:
-+ return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.build_info);
-+ case IEI_WT61P803_PUZZLE_BOOTLOADER_MODE:
-+ return scnprintf(buf, PAGE_SIZE, "%d\n", mcu->version.bootloader_mode);
-+ case IEI_WT61P803_PUZZLE_PROTOCOL_VERSION:
-+ return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.protocol_version);
-+ case IEI_WT61P803_PUZZLE_SERIAL_NUMBER:
-+ ret = iei_wt61p803_puzzle_get_serial_number(mcu);
-+ if (!ret)
-+ ret = scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.serial_number);
-+ else
-+ ret = 0;
-+ return ret;
-+ case IEI_WT61P803_PUZZLE_MAC_ADDRESS:
-+ ret = iei_wt61p803_puzzle_get_mac_address(mcu, pattr->index);
-+ if (!ret)
-+ ret = scnprintf(buf, PAGE_SIZE, "%s\n",
-+ mcu->version.mac_address[pattr->index]);
-+ else
-+ ret = 0;
-+ return ret;
-+ case IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS:
-+ case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY:
-+ case IEI_WT61P803_PUZZLE_POWER_STATUS:
-+ ret = iei_wt61p803_puzzle_get_mcu_status(mcu);
-+ if (ret)
-+ return ret;
-+
-+ mutex_lock(&mcu->lock);
-+ switch (pattr->type) {
-+ case IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS:
-+ ret = scnprintf(buf, PAGE_SIZE, "%x\n",
-+ mcu->status.ac_recovery_status_flag);
-+ break;
-+ case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY:
-+ ret = scnprintf(buf, PAGE_SIZE, "%x\n", mcu->status.power_loss_recovery);
-+ break;
-+ case IEI_WT61P803_PUZZLE_POWER_STATUS:
-+ ret = scnprintf(buf, PAGE_SIZE, "%x\n", mcu->status.power_status);
-+ break;
-+ default:
-+ ret = 0;
-+ break;
-+ }
-+ mutex_unlock(&mcu->lock);
-+ return ret;
-+ default:
-+ return 0;
-+ }
-+
-+ return 0;
-+}
-+
-+static ssize_t store_output(struct device *dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t len)
-+{
-+ unsigned char serial_number[IEI_WT61P803_PUZZLE_SN_LENGTH];
-+ unsigned char mac_address[IEI_WT61P803_PUZZLE_MAC_LENGTH];
-+ struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev);
-+ struct iei_wt61p803_puzzle_device_attribute *pattr = to_puzzle_dev_attr(attr);
-+ int power_loss_recovery_action = 0;
-+ int ret;
-+
-+ switch (pattr->type) {
-+ case IEI_WT61P803_PUZZLE_SERIAL_NUMBER:
-+ if (len != (size_t)(IEI_WT61P803_PUZZLE_SN_LENGTH + 1))
-+ return -EINVAL;
-+ memcpy(serial_number, buf, sizeof(serial_number));
-+ ret = iei_wt61p803_puzzle_write_serial_number(mcu, serial_number);
-+ if (ret)
-+ return ret;
-+ return len;
-+ case IEI_WT61P803_PUZZLE_MAC_ADDRESS:
-+ if (len != (size_t)(IEI_WT61P803_PUZZLE_MAC_LENGTH + 1))
-+ return -EINVAL;
-+
-+ memcpy(mac_address, buf, sizeof(mac_address));
-+
-+ if (strlen(attr->attr.name) != 13)
-+ return -EIO;
-+
-+ ret = iei_wt61p803_puzzle_write_mac_address(mcu, mac_address, pattr->index);
-+ if (ret)
-+ return ret;
-+ return len;
-+ case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY:
-+ ret = kstrtoint(buf, 10, &power_loss_recovery_action);
-+ if (ret)
-+ return ret;
-+ ret = iei_wt61p803_puzzle_write_power_loss_recovery(mcu,
-+ power_loss_recovery_action);
-+ if (ret)
-+ return ret;
-+ return len;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+#define IEI_WT61P803_PUZZLE_ATTR(_name, _mode, _show, _store, _type, _index) \
-+ struct iei_wt61p803_puzzle_device_attribute dev_attr_##_name = \
-+ { .dev_attr = __ATTR(_name, _mode, _show, _store), \
-+ .type = _type, \
-+ .index = _index }
-+
-+#define IEI_WT61P803_PUZZLE_ATTR_RO(_name, _type, _id) \
-+ IEI_WT61P803_PUZZLE_ATTR(_name, 0444, show_output, NULL, _type, _id)
-+
-+#define IEI_WT61P803_PUZZLE_ATTR_RW(_name, _type, _id) \
-+ IEI_WT61P803_PUZZLE_ATTR(_name, 0644, show_output, store_output, _type, _id)
-+
-+static IEI_WT61P803_PUZZLE_ATTR_RO(version, IEI_WT61P803_PUZZLE_VERSION, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RO(build_info, IEI_WT61P803_PUZZLE_BUILD_INFO, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RO(bootloader_mode, IEI_WT61P803_PUZZLE_BOOTLOADER_MODE, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RO(protocol_version, IEI_WT61P803_PUZZLE_PROTOCOL_VERSION, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(serial_number, IEI_WT61P803_PUZZLE_SERIAL_NUMBER, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_0, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_1, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 1);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_2, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 2);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_3, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 3);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_4, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 4);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_5, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 5);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_6, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 6);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_7, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 7);
-+static IEI_WT61P803_PUZZLE_ATTR_RO(ac_recovery_status, IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(power_loss_recovery, IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RO(power_status, IEI_WT61P803_PUZZLE_POWER_STATUS, 0);
-+
-+static struct attribute *iei_wt61p803_puzzle_attrs[] = {
-+ &dev_attr_version.dev_attr.attr,
-+ &dev_attr_build_info.dev_attr.attr,
-+ &dev_attr_bootloader_mode.dev_attr.attr,
-+ &dev_attr_protocol_version.dev_attr.attr,
-+ &dev_attr_serial_number.dev_attr.attr,
-+ &dev_attr_mac_address_0.dev_attr.attr,
-+ &dev_attr_mac_address_1.dev_attr.attr,
-+ &dev_attr_mac_address_2.dev_attr.attr,
-+ &dev_attr_mac_address_3.dev_attr.attr,
-+ &dev_attr_mac_address_4.dev_attr.attr,
-+ &dev_attr_mac_address_5.dev_attr.attr,
-+ &dev_attr_mac_address_6.dev_attr.attr,
-+ &dev_attr_mac_address_7.dev_attr.attr,
-+ &dev_attr_ac_recovery_status.dev_attr.attr,
-+ &dev_attr_power_loss_recovery.dev_attr.attr,
-+ &dev_attr_power_status.dev_attr.attr,
-+ NULL
-+};
-+ATTRIBUTE_GROUPS(iei_wt61p803_puzzle);
-+
-+static int iei_wt61p803_puzzle_sysfs_create(struct device *dev,
-+ struct iei_wt61p803_puzzle *mcu)
-+{
-+ int ret;
-+
-+ ret = sysfs_create_groups(&mcu->dev->kobj, iei_wt61p803_puzzle_groups);
-+ if (ret)
-+ mfd_remove_devices(mcu->dev);
-+
-+ return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_sysfs_remove(struct device *dev,
-+ struct iei_wt61p803_puzzle *mcu)
-+{
-+ /* Remove sysfs groups */
-+ sysfs_remove_groups(&mcu->dev->kobj, iei_wt61p803_puzzle_groups);
-+ mfd_remove_devices(mcu->dev);
-+
-+ return 0;
-+}
-+
-+static int iei_wt61p803_puzzle_probe(struct serdev_device *serdev)
-+{
-+ struct device *dev = &serdev->dev;
-+ struct iei_wt61p803_puzzle *mcu;
-+ u32 baud;
-+ int ret;
-+
-+ /* Read the baud rate from 'current-speed', because the MCU supports different rates */
-+ if (device_property_read_u32(dev, "current-speed", &baud)) {
-+ dev_err(dev,
-+ "'current-speed' is not specified in device node\n");
-+ return -EINVAL;
-+ }
-+ dev_dbg(dev, "Driver baud rate: %d\n", baud);
-+
-+ /* Allocate the memory */
-+ mcu = devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL);
-+ if (!mcu)
-+ return -ENOMEM;
-+
-+ mcu->reply = devm_kzalloc(dev, sizeof(*mcu->reply), GFP_KERNEL);
-+ if (!mcu->reply)
-+ return -ENOMEM;
-+
-+ /* Initialize device struct data */
-+ mcu->serdev = serdev;
-+ mcu->dev = dev;
-+ init_completion(&mcu->reply->received);
-+ mutex_init(&mcu->reply_lock);
-+ mutex_init(&mcu->lock);
-+
-+ /* Setup UART interface */
-+ serdev_device_set_drvdata(serdev, mcu);
-+ serdev_device_set_client_ops(serdev, &iei_wt61p803_puzzle_serdev_device_ops);
-+ ret = devm_serdev_device_open(dev, serdev);
-+ if (ret)
-+ return ret;
-+ serdev_device_set_baudrate(serdev, baud);
-+ serdev_device_set_flow_control(serdev, false);
-+ ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
-+ if (ret) {
-+ dev_err(dev, "Failed to set parity\n");
-+ return ret;
-+ }
-+
-+ ret = iei_wt61p803_puzzle_get_version(mcu);
-+ if (ret)
-+ return ret;
-+
-+ dev_dbg(dev, "MCU version: %s\n", mcu->version.version);
-+ dev_dbg(dev, "MCU firmware build info: %s\n", mcu->version.build_info);
-+ dev_dbg(dev, "MCU in bootloader mode: %s\n",
-+ mcu->version.bootloader_mode ? "true" : "false");
-+ dev_dbg(dev, "MCU protocol version: %s\n", mcu->version.protocol_version);
-+
-+ if (device_property_read_bool(dev, "enable-beep")) {
-+ ret = iei_wt61p803_puzzle_buzzer(mcu, false);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ ret = iei_wt61p803_puzzle_sysfs_create(dev, mcu);
-+ if (ret)
-+ return ret;
-+
-+ return devm_of_platform_populate(dev);
-+}
-+
-+static void iei_wt61p803_puzzle_remove(struct serdev_device *serdev)
-+{
-+ struct device *dev = &serdev->dev;
-+ struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev);
-+
-+ iei_wt61p803_puzzle_sysfs_remove(dev, mcu);
-+}
-+
-+static const struct of_device_id iei_wt61p803_puzzle_dt_ids[] = {
-+ { .compatible = "iei,wt61p803-puzzle" },
-+ { }
-+};
-+
-+MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_dt_ids);
-+
-+static struct serdev_device_driver iei_wt61p803_puzzle_drv = {
-+ .probe = iei_wt61p803_puzzle_probe,
-+ .remove = iei_wt61p803_puzzle_remove,
-+ .driver = {
-+ .name = "iei-wt61p803-puzzle",
-+ .of_match_table = iei_wt61p803_puzzle_dt_ids,
-+ },
-+};
-+
-+module_serdev_device_driver(iei_wt61p803_puzzle_drv);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Luka Kovacic <luka.kovacic@sartura.hr>");
-+MODULE_DESCRIPTION("IEI WT61P803 PUZZLE MCU Driver");
---- /dev/null
-+++ b/include/linux/mfd/iei-wt61p803-puzzle.h
-@@ -0,0 +1,66 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+/* IEI WT61P803 PUZZLE MCU Driver
-+ * System management microcontroller for fan control, temperature sensor reading,
-+ * LED control and system identification on IEI Puzzle series ARM-based appliances.
-+ *
-+ * Copyright (C) 2020 Sartura Ltd.
-+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
-+ */
-+
-+#ifndef _MFD_IEI_WT61P803_PUZZLE_H_
-+#define _MFD_IEI_WT61P803_PUZZLE_H_
-+
-+#define IEI_WT61P803_PUZZLE_BUF_SIZE 512
-+
-+/* Command magic numbers */
-+#define IEI_WT61P803_PUZZLE_CMD_HEADER_START 0x40 /* @ */
-+#define IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER 0x25 /* % */
-+#define IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM 0xF7
-+
-+#define IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK 0x30 /* 0 */
-+#define IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK 0x70
-+
-+#define IEI_WT61P803_PUZZLE_CMD_EEPROM_READ 0xA1
-+#define IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE 0xA0
-+
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_VERSION 0x56 /* V */
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_BUILD 0x42 /* B */
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_BOOTLOADER_MODE 0x4D /* M */
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_BOOTLOADER 0x30
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_APPS 0x31
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_PROTOCOL_VERSION 0x50 /* P */
-+
-+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_SINGLE 0x43 /* C */
-+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER 0x4F /* O */
-+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS 0x53 /* S */
-+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS 0x41 /* A */
-+
-+#define IEI_WT61P803_PUZZLE_CMD_LED 0x52 /* R */
-+#define IEI_WT61P803_PUZZLE_CMD_LED_POWER 0x31 /* 1 */
-+
-+#define IEI_WT61P803_PUZZLE_CMD_TEMP 0x54 /* T */
-+#define IEI_WT61P803_PUZZLE_CMD_TEMP_ALL 0x41 /* A */
-+
-+#define IEI_WT61P803_PUZZLE_CMD_FAN 0x46 /* F */
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ 0x5A /* Z */
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_WRITE 0x57 /* W */
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_BASE 0x30
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_RPM_BASE 0x41 /* A */
-+
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM(x) (IEI_WT61P803_PUZZLE_CMD_FAN_PWM_BASE + (x)) /* 0 - 1 */
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_RPM(x) (IEI_WT61P803_PUZZLE_CMD_FAN_RPM_BASE + (x)) /* 0 - 5 */
-+
-+struct iei_wt61p803_puzzle_mcu_version;
-+struct iei_wt61p803_puzzle_reply;
-+struct iei_wt61p803_puzzle;
-+
-+int iei_wt61p803_puzzle_write_command_watchdog(struct iei_wt61p803_puzzle *mcu,
-+ unsigned char *cmd, size_t size,
-+ unsigned char *reply_data, size_t *reply_size,
-+ int retry_count);
-+
-+int iei_wt61p803_puzzle_write_command(struct iei_wt61p803_puzzle *mcu,
-+ unsigned char *cmd, size_t size,
-+ unsigned char *reply_data, size_t *reply_size);
-+
-+#endif /* _MFD_IEI_WT61P803_PUZZLE_H_ */
+++ /dev/null
-From e3310a638cd310bfd93dbbc6d2732ab6aea18dd2 Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:34 +0000
-Subject: [PATCH 3/7] drivers: hwmon: Add the IEI WT61P803 PUZZLE HWMON driver
-
-Add the IEI WT61P803 PUZZLE HWMON driver, that handles the fan speed
-control via PWM, reading fan speed and reading on-board temperature
-sensors.
-
-The driver registers a HWMON device and a simple thermal cooling device to
-enable in-kernel fan management.
-
-This driver depends on the IEI WT61P803 PUZZLE MFD driver.
-
-Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
-Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
-Acked-by: Guenter Roeck <linux@roeck-us.net>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Cc: Robert Marko <robert.marko@sartura.hr>
----
- drivers/hwmon/Kconfig | 8 +
- drivers/hwmon/Makefile | 1 +
- drivers/hwmon/iei-wt61p803-puzzle-hwmon.c | 445 ++++++++++++++++++++++
- 3 files changed, 454 insertions(+)
- create mode 100644 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
-
---- a/drivers/hwmon/Kconfig
-+++ b/drivers/hwmon/Kconfig
-@@ -755,6 +755,14 @@ config SENSORS_IBMPOWERNV
- This driver can also be built as a module. If so, the module
- will be called ibmpowernv.
-
-+config SENSORS_IEI_WT61P803_PUZZLE_HWMON
-+ tristate "IEI WT61P803 PUZZLE MFD HWMON Driver"
-+ depends on MFD_IEI_WT61P803_PUZZLE
-+ help
-+ The IEI WT61P803 PUZZLE MFD HWMON Driver handles reading fan speed
-+ and writing fan PWM values. It also supports reading on-board
-+ temperature sensors.
-+
- config SENSORS_IIO_HWMON
- tristate "Hwmon driver that uses channels specified via iio maps"
- depends on IIO
---- a/drivers/hwmon/Makefile
-+++ b/drivers/hwmon/Makefile
-@@ -87,6 +87,7 @@ obj-$(CONFIG_SENSORS_HIH6130) += hih6130
- obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o
- obj-$(CONFIG_SENSORS_I5500) += i5500_temp.o
- obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o
-+obj-$(CONFIG_SENSORS_IEI_WT61P803_PUZZLE_HWMON) += iei-wt61p803-puzzle-hwmon.o
- obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o
- obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
- obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o
---- /dev/null
-+++ b/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
-@@ -0,0 +1,445 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* IEI WT61P803 PUZZLE MCU HWMON Driver
-+ *
-+ * Copyright (C) 2020 Sartura Ltd.
-+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/hwmon.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/math64.h>
-+#include <linux/mfd/iei-wt61p803-puzzle.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/property.h>
-+#include <linux/slab.h>
-+#include <linux/thermal.h>
-+
-+#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM 2
-+#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL 255
-+
-+/**
-+ * struct iei_wt61p803_puzzle_thermal_cooling_device - Thermal cooling device instance
-+ * @mcu_hwmon: Parent driver struct pointer
-+ * @tcdev: Thermal cooling device pointer
-+ * @name: Thermal cooling device name
-+ * @pwm_channel: Controlled PWM channel (0 or 1)
-+ * @cooling_levels: Thermal cooling device cooling levels (DT)
-+ * @cur_level: Current cooling level
-+ * @num_levels: Number of cooling levels
-+ */
-+struct iei_wt61p803_puzzle_thermal_cooling_device {
-+ struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
-+ struct thermal_cooling_device *tcdev;
-+ char name[THERMAL_NAME_LENGTH];
-+ int pwm_channel;
-+ u32 *cooling_levels;
-+ int cur_level;
-+ u8 num_levels;
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle_hwmon - MCU HWMON Driver
-+ * @mcu: MCU struct pointer
-+ * @response_buffer Global MCU response buffer
-+ * @thermal_cooling_dev_present: Per-channel thermal cooling device control indicator
-+ * @cdev: Per-channel thermal cooling device private structure
-+ */
-+struct iei_wt61p803_puzzle_hwmon {
-+ struct iei_wt61p803_puzzle *mcu;
-+ unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
-+ bool thermal_cooling_dev_present[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM];
-+ struct iei_wt61p803_puzzle_thermal_cooling_device
-+ *cdev[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM];
-+ struct mutex lock; /* mutex to protect response_buffer array */
-+};
-+
-+#define raw_temp_to_milidegree_celsius(x) (((x) - 0x80) * 1000)
-+static int iei_wt61p803_puzzle_read_temp_sensor(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
-+ int channel, long *value)
-+{
-+ unsigned char *resp_buf = mcu_hwmon->response_buffer;
-+ unsigned char temp_sensor_ntc_cmd[4] = {
-+ IEI_WT61P803_PUZZLE_CMD_HEADER_START,
-+ IEI_WT61P803_PUZZLE_CMD_TEMP,
-+ IEI_WT61P803_PUZZLE_CMD_TEMP_ALL,
-+ };
-+ size_t reply_size;
-+ int ret;
-+
-+ mutex_lock(&mcu_hwmon->lock);
-+ ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, temp_sensor_ntc_cmd,
-+ sizeof(temp_sensor_ntc_cmd), resp_buf,
-+ &reply_size);
-+ if (ret)
-+ goto exit;
-+
-+ if (reply_size != 7) {
-+ ret = -EIO;
-+ goto exit;
-+ }
-+
-+ /* Check the number of NTC values */
-+ if (resp_buf[3] != '2') {
-+ ret = -EIO;
-+ goto exit;
-+ }
-+
-+ *value = raw_temp_to_milidegree_celsius(resp_buf[4 + channel]);
-+exit:
-+ mutex_unlock(&mcu_hwmon->lock);
-+ return ret;
-+}
-+
-+#define raw_fan_val_to_rpm(x, y) ((((x) << 8 | (y)) / 2) * 60)
-+static int iei_wt61p803_puzzle_read_fan_speed(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
-+ int channel, long *value)
-+{
-+ unsigned char *resp_buf = mcu_hwmon->response_buffer;
-+ unsigned char fan_speed_cmd[4] = {};
-+ size_t reply_size;
-+ int ret;
-+
-+ fan_speed_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+ fan_speed_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
-+ fan_speed_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_RPM(channel);
-+
-+ mutex_lock(&mcu_hwmon->lock);
-+ ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, fan_speed_cmd,
-+ sizeof(fan_speed_cmd), resp_buf,
-+ &reply_size);
-+ if (ret)
-+ goto exit;
-+
-+ if (reply_size != 7) {
-+ ret = -EIO;
-+ goto exit;
-+ }
-+
-+ *value = raw_fan_val_to_rpm(resp_buf[3], resp_buf[4]);
-+exit:
-+ mutex_unlock(&mcu_hwmon->lock);
-+ return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_write_pwm_channel(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
-+ int channel, long pwm_set_val)
-+{
-+ unsigned char *resp_buf = mcu_hwmon->response_buffer;
-+ unsigned char pwm_set_cmd[6] = {};
-+ size_t reply_size;
-+ int ret;
-+
-+ pwm_set_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+ pwm_set_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
-+ pwm_set_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM_WRITE;
-+ pwm_set_cmd[3] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM(channel);
-+ pwm_set_cmd[4] = pwm_set_val;
-+
-+ mutex_lock(&mcu_hwmon->lock);
-+ ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_set_cmd,
-+ sizeof(pwm_set_cmd), resp_buf,
-+ &reply_size);
-+ if (ret)
-+ goto exit;
-+
-+ if (reply_size != 3) {
-+ ret = -EIO;
-+ goto exit;
-+ }
-+
-+ if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+ resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+ resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
-+ ret = -EIO;
-+ goto exit;
-+ }
-+exit:
-+ mutex_unlock(&mcu_hwmon->lock);
-+ return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_read_pwm_channel(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
-+ int channel, long *value)
-+{
-+ unsigned char *resp_buf = mcu_hwmon->response_buffer;
-+ unsigned char pwm_get_cmd[5] = {};
-+ size_t reply_size;
-+ int ret;
-+
-+ pwm_get_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+ pwm_get_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
-+ pwm_get_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ;
-+ pwm_get_cmd[3] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM(channel);
-+
-+ ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_get_cmd,
-+ sizeof(pwm_get_cmd), resp_buf,
-+ &reply_size);
-+ if (ret)
-+ return ret;
-+
-+ if (reply_size != 5)
-+ return -EIO;
-+
-+ if (resp_buf[2] != IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ)
-+ return -EIO;
-+
-+ *value = resp_buf[3];
-+
-+ return 0;
-+}
-+
-+static int iei_wt61p803_puzzle_read(struct device *dev, enum hwmon_sensor_types type,
-+ u32 attr, int channel, long *val)
-+{
-+ struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = dev_get_drvdata(dev->parent);
-+
-+ switch (type) {
-+ case hwmon_pwm:
-+ return iei_wt61p803_puzzle_read_pwm_channel(mcu_hwmon, channel, val);
-+ case hwmon_fan:
-+ return iei_wt61p803_puzzle_read_fan_speed(mcu_hwmon, channel, val);
-+ case hwmon_temp:
-+ return iei_wt61p803_puzzle_read_temp_sensor(mcu_hwmon, channel, val);
-+ default:
-+ return -EINVAL;
-+ }
-+}
-+
-+static int iei_wt61p803_puzzle_write(struct device *dev, enum hwmon_sensor_types type,
-+ u32 attr, int channel, long val)
-+{
-+ struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = dev_get_drvdata(dev->parent);
-+
-+ return iei_wt61p803_puzzle_write_pwm_channel(mcu_hwmon, channel, val);
-+}
-+
-+static umode_t iei_wt61p803_puzzle_is_visible(const void *data, enum hwmon_sensor_types type,
-+ u32 attr, int channel)
-+{
-+ const struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = data;
-+
-+ switch (type) {
-+ case hwmon_pwm:
-+ if (mcu_hwmon->thermal_cooling_dev_present[channel])
-+ return 0444;
-+ if (attr == hwmon_pwm_input)
-+ return 0644;
-+ break;
-+ case hwmon_fan:
-+ if (attr == hwmon_fan_input)
-+ return 0444;
-+ break;
-+ case hwmon_temp:
-+ if (attr == hwmon_temp_input)
-+ return 0444;
-+ break;
-+ default:
-+ return 0;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct hwmon_ops iei_wt61p803_puzzle_hwmon_ops = {
-+ .is_visible = iei_wt61p803_puzzle_is_visible,
-+ .read = iei_wt61p803_puzzle_read,
-+ .write = iei_wt61p803_puzzle_write,
-+};
-+
-+static const struct hwmon_channel_info *iei_wt61p803_puzzle_info[] = {
-+ HWMON_CHANNEL_INFO(pwm,
-+ HWMON_PWM_INPUT,
-+ HWMON_PWM_INPUT),
-+ HWMON_CHANNEL_INFO(fan,
-+ HWMON_F_INPUT,
-+ HWMON_F_INPUT,
-+ HWMON_F_INPUT,
-+ HWMON_F_INPUT,
-+ HWMON_F_INPUT),
-+ HWMON_CHANNEL_INFO(temp,
-+ HWMON_T_INPUT,
-+ HWMON_T_INPUT),
-+ NULL
-+};
-+
-+static const struct hwmon_chip_info iei_wt61p803_puzzle_chip_info = {
-+ .ops = &iei_wt61p803_puzzle_hwmon_ops,
-+ .info = iei_wt61p803_puzzle_info,
-+};
-+
-+static int iei_wt61p803_puzzle_get_max_state(struct thermal_cooling_device *tcdev,
-+ unsigned long *state)
-+{
-+ struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
-+
-+ if (!cdev)
-+ return -EINVAL;
-+
-+ *state = cdev->num_levels - 1;
-+ return 0;
-+}
-+
-+static int iei_wt61p803_puzzle_get_cur_state(struct thermal_cooling_device *tcdev,
-+ unsigned long *state)
-+{
-+ struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
-+
-+ if (!cdev)
-+ return -EINVAL;
-+
-+ if (cdev->cur_level < 0)
-+ return -EAGAIN;
-+
-+ *state = cdev->cur_level;
-+ return 0;
-+}
-+
-+static int iei_wt61p803_puzzle_set_cur_state(struct thermal_cooling_device *tcdev,
-+ unsigned long state)
-+{
-+ struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
-+ u8 pwm_level;
-+
-+ if (!cdev)
-+ return -EINVAL;
-+
-+ if (state >= cdev->num_levels)
-+ return -EINVAL;
-+
-+ if (state == cdev->cur_level)
-+ return 0;
-+
-+ cdev->cur_level = state;
-+ pwm_level = cdev->cooling_levels[state];
-+
-+ return iei_wt61p803_puzzle_write_pwm_channel(cdev->mcu_hwmon, cdev->pwm_channel, pwm_level);
-+}
-+
-+static const struct thermal_cooling_device_ops iei_wt61p803_puzzle_cooling_ops = {
-+ .get_max_state = iei_wt61p803_puzzle_get_max_state,
-+ .get_cur_state = iei_wt61p803_puzzle_get_cur_state,
-+ .set_cur_state = iei_wt61p803_puzzle_set_cur_state,
-+};
-+
-+static int
-+iei_wt61p803_puzzle_enable_thermal_cooling_dev(struct device *dev,
-+ struct fwnode_handle *child,
-+ struct iei_wt61p803_puzzle_hwmon *mcu_hwmon)
-+{
-+ struct iei_wt61p803_puzzle_thermal_cooling_device *cdev;
-+ u32 pwm_channel;
-+ u8 num_levels;
-+ int i, ret;
-+
-+ ret = fwnode_property_read_u32(child, "reg", &pwm_channel);
-+ if (ret)
-+ return ret;
-+
-+ mcu_hwmon->thermal_cooling_dev_present[pwm_channel] = true;
-+
-+ num_levels = fwnode_property_count_u32(child, "cooling-levels");
-+ if (!num_levels)
-+ return -EINVAL;
-+
-+ cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL);
-+ if (!cdev)
-+ return -ENOMEM;
-+
-+ cdev->cooling_levels = devm_kmalloc_array(dev, num_levels, sizeof(u32), GFP_KERNEL);
-+ if (!cdev->cooling_levels)
-+ return -ENOMEM;
-+
-+ ret = fwnode_property_read_u32_array(child, "cooling-levels",
-+ cdev->cooling_levels,
-+ num_levels);
-+ if (ret) {
-+ dev_err(dev, "Couldn't read property 'cooling-levels'\n");
-+ return ret;
-+ }
-+
-+ for (i = 0; i < num_levels; i++) {
-+ if (cdev->cooling_levels[i] >
-+ IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL) {
-+ dev_err(dev, "iei_wt61p803_fan state[%d]:%d > %d\n", i,
-+ cdev->cooling_levels[i],
-+ IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL);
-+ return -EINVAL;
-+ }
-+ }
-+
-+ cdev->mcu_hwmon = mcu_hwmon;
-+ cdev->pwm_channel = pwm_channel;
-+ cdev->num_levels = num_levels;
-+ cdev->cur_level = -1;
-+ mcu_hwmon->cdev[pwm_channel] = cdev;
-+
-+ snprintf(cdev->name, THERMAL_NAME_LENGTH, "wt61p803_puzzle_%d", pwm_channel);
-+ cdev->tcdev = devm_thermal_of_cooling_device_register(dev, to_of_node(child), cdev->name,
-+ cdev, &iei_wt61p803_puzzle_cooling_ops);
-+ if (IS_ERR(cdev->tcdev))
-+ return PTR_ERR(cdev->tcdev);
-+
-+ return 0;
-+}
-+
-+static int iei_wt61p803_puzzle_hwmon_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
-+ struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
-+ struct fwnode_handle *child;
-+ struct device *hwmon_dev;
-+ int ret;
-+
-+ mcu_hwmon = devm_kzalloc(dev, sizeof(*mcu_hwmon), GFP_KERNEL);
-+ if (!mcu_hwmon)
-+ return -ENOMEM;
-+
-+ mcu_hwmon->mcu = mcu;
-+ platform_set_drvdata(pdev, mcu_hwmon);
-+ mutex_init(&mcu_hwmon->lock);
-+
-+ hwmon_dev = devm_hwmon_device_register_with_info(dev, "iei_wt61p803_puzzle",
-+ mcu_hwmon,
-+ &iei_wt61p803_puzzle_chip_info,
-+ NULL);
-+ if (IS_ERR(hwmon_dev))
-+ return PTR_ERR(hwmon_dev);
-+
-+ /* Control fans via PWM lines via Linux Kernel */
-+ if (IS_ENABLED(CONFIG_THERMAL)) {
-+ device_for_each_child_node(dev, child) {
-+ ret = iei_wt61p803_puzzle_enable_thermal_cooling_dev(dev, child, mcu_hwmon);
-+ if (ret) {
-+ dev_err(dev, "Enabling the PWM fan failed\n");
-+ fwnode_handle_put(child);
-+ return ret;
-+ }
-+ }
-+ }
-+ return 0;
-+}
-+
-+static const struct of_device_id iei_wt61p803_puzzle_hwmon_id_table[] = {
-+ { .compatible = "iei,wt61p803-puzzle-hwmon" },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_hwmon_id_table);
-+
-+static struct platform_driver iei_wt61p803_puzzle_hwmon_driver = {
-+ .driver = {
-+ .name = "iei-wt61p803-puzzle-hwmon",
-+ .of_match_table = iei_wt61p803_puzzle_hwmon_id_table,
-+ },
-+ .probe = iei_wt61p803_puzzle_hwmon_probe,
-+};
-+
-+module_platform_driver(iei_wt61p803_puzzle_hwmon_driver);
-+
-+MODULE_DESCRIPTION("IEI WT61P803 PUZZLE MCU HWMON Driver");
-+MODULE_AUTHOR("Luka Kovacic <luka.kovacic@sartura.hr>");
-+MODULE_LICENSE("GPL v2");
+++ /dev/null
-From f3b44eb69cc561cf05d00506dcec0dd9be003ed8 Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:35 +0000
-Subject: [PATCH 4/7] drivers: leds: Add the IEI WT61P803 PUZZLE LED driver
-
-Add support for the IEI WT61P803 PUZZLE LED driver.
-Currently only the front panel power LED is supported,
-since it is the only LED on this board wired through the
-MCU.
-
-The LED is wired directly to the on-board MCU controller
-and is toggled using an MCU command.
-
-Support for more LEDs is going to be added in case more
-boards implement this microcontroller, as LEDs use many
-different GPIOs.
-
-This driver depends on the IEI WT61P803 PUZZLE MFD driver.
-
-Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
-Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Cc: Robert Marko <robert.marko@sartura.hr>
----
- drivers/leds/Kconfig | 8 ++
- drivers/leds/Makefile | 1 +
- drivers/leds/leds-iei-wt61p803-puzzle.c | 147 ++++++++++++++++++++++++
- 3 files changed, 156 insertions(+)
- create mode 100644 drivers/leds/leds-iei-wt61p803-puzzle.c
-
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -300,6 +300,14 @@ config LEDS_IPAQ_MICRO
- Choose this option if you want to use the notification LED on
- Compaq/HP iPAQ h3100 and h3600.
-
-+config LEDS_IEI_WT61P803_PUZZLE
-+ tristate "LED Support for the IEI WT61P803 PUZZLE MCU"
-+ depends on LEDS_CLASS
-+ depends on MFD_IEI_WT61P803_PUZZLE
-+ help
-+ This option enables support for LEDs controlled by the IEI WT61P803
-+ M801 MCU.
-+
- config LEDS_HP6XX
- tristate "LED Support for the HP Jornada 6xx"
- depends on LEDS_CLASS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.
- obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
- obj-$(CONFIG_LEDS_IP30) += leds-ip30.o
- obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o
-+obj-$(CONFIG_LEDS_IEI_WT61P803_PUZZLE) += leds-iei-wt61p803-puzzle.o
- obj-$(CONFIG_LEDS_IS31FL319X) += leds-is31fl319x.o
- obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o
- obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o
---- /dev/null
-+++ b/drivers/leds/leds-iei-wt61p803-puzzle.c
-@@ -0,0 +1,147 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* IEI WT61P803 PUZZLE MCU LED Driver
-+ *
-+ * Copyright (C) 2020 Sartura Ltd.
-+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
-+ */
-+
-+#include <linux/leds.h>
-+#include <linux/mfd/iei-wt61p803-puzzle.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/property.h>
-+#include <linux/slab.h>
-+
-+enum iei_wt61p803_puzzle_led_state {
-+ IEI_LED_OFF = 0x30,
-+ IEI_LED_ON = 0x31,
-+ IEI_LED_BLINK_5HZ = 0x32,
-+ IEI_LED_BLINK_1HZ = 0x33,
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle_led - MCU LED Driver
-+ * @cdev: LED classdev
-+ * @mcu: MCU struct pointer
-+ * @response_buffer Global MCU response buffer
-+ * @lock: General mutex lock to protect simultaneous R/W access to led_power_state
-+ * @led_power_state: State of the front panel power LED
-+ */
-+struct iei_wt61p803_puzzle_led {
-+ struct led_classdev cdev;
-+ struct iei_wt61p803_puzzle *mcu;
-+ unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
-+ struct mutex lock; /* mutex to protect led_power_state */
-+ int led_power_state;
-+};
-+
-+static inline struct iei_wt61p803_puzzle_led *cdev_to_iei_wt61p803_puzzle_led
-+ (struct led_classdev *led_cdev)
-+{
-+ return container_of(led_cdev, struct iei_wt61p803_puzzle_led, cdev);
-+}
-+
-+static int iei_wt61p803_puzzle_led_brightness_set_blocking(struct led_classdev *cdev,
-+ enum led_brightness brightness)
-+{
-+ struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev);
-+ unsigned char *resp_buf = priv->response_buffer;
-+ unsigned char led_power_cmd[5] = {};
-+ size_t reply_size;
-+ int ret;
-+
-+ led_power_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+ led_power_cmd[1] = IEI_WT61P803_PUZZLE_CMD_LED;
-+ led_power_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_POWER;
-+ led_power_cmd[3] = brightness == LED_OFF ? IEI_LED_OFF : IEI_LED_ON;
-+
-+ ret = iei_wt61p803_puzzle_write_command(priv->mcu, led_power_cmd,
-+ sizeof(led_power_cmd),
-+ resp_buf,
-+ &reply_size);
-+ if (ret)
-+ return ret;
-+
-+ if (reply_size != 3)
-+ return -EIO;
-+
-+ if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+ resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+ resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK))
-+ return -EIO;
-+
-+ mutex_lock(&priv->lock);
-+ priv->led_power_state = brightness;
-+ mutex_unlock(&priv->lock);
-+
-+ return 0;
-+}
-+
-+static enum led_brightness iei_wt61p803_puzzle_led_brightness_get(struct led_classdev *cdev)
-+{
-+ struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev);
-+ int led_state;
-+
-+ mutex_lock(&priv->lock);
-+ led_state = priv->led_power_state;
-+ mutex_unlock(&priv->lock);
-+
-+ return led_state;
-+}
-+
-+static int iei_wt61p803_puzzle_led_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
-+ struct iei_wt61p803_puzzle_led *priv;
-+ struct led_init_data init_data = {};
-+ struct fwnode_handle *child;
-+ int ret;
-+
-+ if (device_get_child_node_count(dev) != 1)
-+ return -EINVAL;
-+
-+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ priv->mcu = mcu;
-+ priv->led_power_state = 1;
-+ mutex_init(&priv->lock);
-+ dev_set_drvdata(dev, priv);
-+
-+ child = device_get_next_child_node(dev, NULL);
-+ init_data.fwnode = child;
-+
-+ priv->cdev.brightness_set_blocking = iei_wt61p803_puzzle_led_brightness_set_blocking;
-+ priv->cdev.brightness_get = iei_wt61p803_puzzle_led_brightness_get;
-+ priv->cdev.max_brightness = 1;
-+
-+ ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
-+ if (ret)
-+ dev_err(dev, "Could not register LED\n");
-+
-+ fwnode_handle_put(child);
-+ return ret;
-+}
-+
-+static const struct of_device_id iei_wt61p803_puzzle_led_of_match[] = {
-+ { .compatible = "iei,wt61p803-puzzle-leds" },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_led_of_match);
-+
-+static struct platform_driver iei_wt61p803_puzzle_led_driver = {
-+ .driver = {
-+ .name = "iei-wt61p803-puzzle-led",
-+ .of_match_table = iei_wt61p803_puzzle_led_of_match,
-+ },
-+ .probe = iei_wt61p803_puzzle_led_probe,
-+};
-+module_platform_driver(iei_wt61p803_puzzle_led_driver);
-+
-+MODULE_DESCRIPTION("IEI WT61P803 PUZZLE front panel LED driver");
-+MODULE_AUTHOR("Luka Kovacic <luka.kovacic@sartura.hr>");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:leds-iei-wt61p803-puzzle");
+++ /dev/null
-From 2fab3b4956c5b2f83c1e1abffc1df39de2933d83 Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:36 +0000
-Subject: [PATCH 5/7] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs
- interface documentation
-
-Add the iei-wt61p803-puzzle driver sysfs interface documentation to allow
-monitoring and control of the microcontroller from user space.
-
-Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
-Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Cc: Robert Marko <robert.marko@sartura.hr>
----
- .../testing/sysfs-driver-iei-wt61p803-puzzle | 61 +++++++++++++++++++
- 1 file changed, 61 insertions(+)
- create mode 100644 Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle
-
---- /dev/null
-+++ b/Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle
-@@ -0,0 +1,61 @@
-+What: /sys/bus/serial/devices/.../mac_address_*
-+Date: September 2020
-+Contact: Luka Kovacic <luka.kovacic@sartura.hr>
-+Description: (RW) Internal factory assigned MAC address values
-+
-+What: /sys/bus/serial/devices/.../serial_number
-+Date: September 2020
-+Contact: Luka Kovacic <luka.kovacic@sartura.hr>
-+Description: (RW) Internal factory assigned serial number
-+
-+What: /sys/bus/serial/devices/.../version
-+Date: September 2020
-+Contact: Luka Kovacic <luka.kovacic@sartura.hr>
-+Description: (RO) Internal MCU firmware version
-+
-+What: /sys/bus/serial/devices/.../protocol_version
-+Date: September 2020
-+Contact: Luka Kovacic <luka.kovacic@sartura.hr>
-+Description: (RO) Internal MCU communication protocol version
-+
-+What: /sys/bus/serial/devices/.../power_loss_recovery
-+Date: September 2020
-+Contact: Luka Kovacic <luka.kovacic@sartura.hr>
-+Description: (RW) Host platform power loss recovery settings
-+ Value mapping: 0 - Always-On, 1 - Always-Off, 2 - Always-AC, 3 - Always-WA
-+
-+What: /sys/bus/serial/devices/.../bootloader_mode
-+Date: September 2020
-+Contact: Luka Kovacic <luka.kovacic@sartura.hr>
-+Description: (RO) Internal MCU bootloader mode status
-+ Value mapping:
-+ 0 - normal mode
-+ 1 - bootloader mode
-+
-+What: /sys/bus/serial/devices/.../power_status
-+Date: September 2020
-+Contact: Luka Kovacic <luka.kovacic@sartura.hr>
-+Description: (RO) Power status indicates the host platform power on method.
-+ Value mapping (bitwise list):
-+ 0x80 - Null
-+ 0x40 - Firmware flag
-+ 0x20 - Power loss detection flag (powered off)
-+ 0x10 - Power loss detection flag (AC mode)
-+ 0x08 - Button power on
-+ 0x04 - Wake-on-LAN power on
-+ 0x02 - RTC alarm power on
-+ 0x01 - AC recover power on
-+
-+What: /sys/bus/serial/devices/.../build_info
-+Date: September 2020
-+Contact: Luka Kovacic <luka.kovacic@sartura.hr>
-+Description: (RO) Internal MCU firmware build date
-+ Format: yyyy/mm/dd hh:mm
-+
-+What: /sys/bus/serial/devices/.../ac_recovery_status
-+Date: September 2020
-+Contact: Luka Kovacic <luka.kovacic@sartura.hr>
-+Description: (RO) Host platform AC recovery status value
-+ Value mapping:
-+ 0 - board has not been recovered from power down
-+ 1 - board has been recovered from power down
+++ /dev/null
-From 0aff3e5923fecc6842473ad07a688d6e2f2c2d55 Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:37 +0000
-Subject: [PATCH 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver
- documentation
-
-Add the iei-wt61p803-puzzle driver hwmon driver interface documentation.
-
-Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
-Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Cc: Robert Marko <robert.marko@sartura.hr>
----
- .../hwmon/iei-wt61p803-puzzle-hwmon.rst | 43 +++++++++++++++++++
- Documentation/hwmon/index.rst | 1 +
- 2 files changed, 44 insertions(+)
- create mode 100644 Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
-
---- /dev/null
-+++ b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
-@@ -0,0 +1,43 @@
-+.. SPDX-License-Identifier: GPL-2.0-only
-+
-+Kernel driver iei-wt61p803-puzzle-hwmon
-+=======================================
-+
-+Supported chips:
-+ * IEI WT61P803 PUZZLE for IEI Puzzle M801
-+
-+ Prefix: 'iei-wt61p803-puzzle-hwmon'
-+
-+Author: Luka Kovacic <luka.kovacic@sartura.hr>
-+
-+
-+Description
-+-----------
-+
-+This driver adds fan and temperature sensor reading for some IEI Puzzle
-+series boards.
-+
-+Sysfs attributes
-+----------------
-+
-+The following attributes are supported:
-+
-+- IEI WT61P803 PUZZLE for IEI Puzzle M801
-+
-+/sys files in hwmon subsystem
-+-----------------------------
-+
-+================= == =====================================================
-+fan[1-5]_input RO files for fan speed (in RPM)
-+pwm[1-2] RW files for fan[1-2] target duty cycle (0..255)
-+temp[1-2]_input RO files for temperature sensors, in millidegree Celsius
-+================= == =====================================================
-+
-+/sys files in thermal subsystem
-+-------------------------------
-+
-+================= == =====================================================
-+cur_state RW file for current cooling state of the cooling device
-+ (0..max_state)
-+max_state RO file for maximum cooling state of the cooling device
-+================= == =====================================================
---- a/Documentation/hwmon/index.rst
-+++ b/Documentation/hwmon/index.rst
-@@ -77,6 +77,7 @@ Hardware Monitoring Kernel Drivers
- ibmaem
- ibm-cffps
- ibmpowernv
-+ iei-wt61p803-puzzle-hwmon
- ina209
- ina2xx
- ina238
+++ /dev/null
-From 12479baad28d2a08c6cb9e83471057635fa1635c Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:38 +0000
-Subject: [PATCH 7/7] MAINTAINERS: Add an entry for the IEI WT61P803 PUZZLE
- driver
-
-Add an entry for the IEI WT61P803 PUZZLE driver (MFD, HWMON, LED drivers).
-
-Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
-Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Cc: Robert Marko <robert.marko@sartura.hr>
----
- MAINTAINERS | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -9900,6 +9900,22 @@ F: include/net/nl802154.h
- F: net/ieee802154/
- F: net/mac802154/
-
-+IEI WT61P803 M801 MFD DRIVER
-+M: Luka Kovacic <luka.kovacic@sartura.hr>
-+M: Luka Perkov <luka.perkov@sartura.hr>
-+M: Goran Medic <goran.medic@sartura.hr>
-+L: linux-kernel@vger.kernel.org
-+S: Maintained
-+F: Documentation/ABI/stable/sysfs-driver-iei-wt61p803-puzzle
-+F: Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
-+F: Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
-+F: Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
-+F: Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
-+F: drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
-+F: drivers/leds/leds-iei-wt61p803-puzzle.c
-+F: drivers/mfd/iei-wt61p803-puzzle.c
-+F: include/linux/mfd/iei-wt61p803-puzzle.h
-+
- IFE PROTOCOL
- M: Yotam Gigi <yotam.gi@gmail.com>
- M: Jamal Hadi Salim <jhs@mojatatu.com>
+++ /dev/null
---- a/drivers/leds/leds-iei-wt61p803-puzzle.c
-+++ b/drivers/leds/leds-iei-wt61p803-puzzle.c
-@@ -9,9 +9,13 @@
- #include <linux/mfd/iei-wt61p803-puzzle.h>
- #include <linux/mod_devicetable.h>
- #include <linux/module.h>
-+#include <linux/of.h>
- #include <linux/platform_device.h>
- #include <linux/property.h>
- #include <linux/slab.h>
-+#include <linux/workqueue.h>
-+
-+#define IEI_LEDS_MAX 4
-
- enum iei_wt61p803_puzzle_led_state {
- IEI_LED_OFF = 0x30,
-@@ -33,7 +37,11 @@ struct iei_wt61p803_puzzle_led {
- struct iei_wt61p803_puzzle *mcu;
- unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
- struct mutex lock; /* mutex to protect led_power_state */
-+ struct work_struct work;
- int led_power_state;
-+ int id;
-+ u8 blinking;
-+ bool active_low;
- };
-
- static inline struct iei_wt61p803_puzzle_led *cdev_to_iei_wt61p803_puzzle_led
-@@ -51,10 +59,18 @@ static int iei_wt61p803_puzzle_led_brigh
- size_t reply_size;
- int ret;
-
-+ if (priv->blinking) {
-+ if (brightness == LED_OFF)
-+ priv->blinking = 0;
-+ else
-+ return 0;
-+ }
-+
- led_power_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
- led_power_cmd[1] = IEI_WT61P803_PUZZLE_CMD_LED;
-- led_power_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_POWER;
-- led_power_cmd[3] = brightness == LED_OFF ? IEI_LED_OFF : IEI_LED_ON;
-+ led_power_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_SET(priv->id);
-+ led_power_cmd[3] = ((brightness == LED_OFF) ^ priv->active_low) ?
-+ IEI_LED_OFF : priv->blinking?priv->blinking:IEI_LED_ON;
-
- ret = iei_wt61p803_puzzle_write_command(priv->mcu, led_power_cmd,
- sizeof(led_power_cmd),
-@@ -90,39 +106,166 @@ static enum led_brightness iei_wt61p803_
- return led_state;
- }
-
-+static void iei_wt61p803_puzzle_led_apply_blink(struct work_struct *work)
-+{
-+ struct iei_wt61p803_puzzle_led *priv = container_of(work, struct iei_wt61p803_puzzle_led, work);
-+ unsigned char led_blink_cmd[5] = {};
-+ unsigned char resp_buf[IEI_WT61P803_PUZZLE_BUF_SIZE];
-+ size_t reply_size;
-+
-+ led_blink_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+ led_blink_cmd[1] = IEI_WT61P803_PUZZLE_CMD_LED;
-+ led_blink_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_SET(priv->id);
-+ led_blink_cmd[3] = priv->blinking;
-+
-+ iei_wt61p803_puzzle_write_command(priv->mcu, led_blink_cmd,
-+ sizeof(led_blink_cmd),
-+ resp_buf,
-+ &reply_size);
-+
-+ return;
-+}
-+
-+static int iei_wt61p803_puzzle_led_set_blink(struct led_classdev *cdev,
-+ unsigned long *delay_on,
-+ unsigned long *delay_off)
-+{
-+ struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev);
-+ u8 blink_mode = 0;
-+ int ret = 0;
-+
-+ /* set defaults */
-+ if (!*delay_on && !*delay_off) {
-+ *delay_on = 500;
-+ *delay_off = 500;
-+ }
-+
-+ /* minimum delay for soft-driven blinking is 100ms to keep load low */
-+ if (*delay_on < 100)
-+ *delay_on = 100;
-+
-+ if (*delay_off < 100)
-+ *delay_off = 100;
-+
-+ /* offload blinking to hardware, if possible */
-+ if (*delay_on != *delay_off) {
-+ ret = -EINVAL;
-+ } else if (*delay_on == 100) {
-+ blink_mode = IEI_LED_BLINK_5HZ;
-+ *delay_on = 100;
-+ *delay_off = 100;
-+ } else if (*delay_on <= 500) {
-+ blink_mode = IEI_LED_BLINK_1HZ;
-+ *delay_on = 500;
-+ *delay_off = 500;
-+ } else {
-+ ret = -EINVAL;
-+ }
-+
-+ mutex_lock(&priv->lock);
-+ priv->blinking = blink_mode;
-+ mutex_unlock(&priv->lock);
-+
-+ if (blink_mode)
-+ schedule_work(&priv->work);
-+
-+ return ret;
-+}
-+
-+
-+static int iei_wt61p803_puzzle_led_set_dt_default(struct led_classdev *cdev,
-+ struct device_node *np)
-+{
-+ const char *state;
-+ int ret = 0;
-+
-+ state = of_get_property(np, "default-state", NULL);
-+ if (state) {
-+ if (!strcmp(state, "on")) {
-+ ret =
-+ iei_wt61p803_puzzle_led_brightness_set_blocking(
-+ cdev, cdev->max_brightness);
-+ } else {
-+ ret = iei_wt61p803_puzzle_led_brightness_set_blocking(
-+ cdev, LED_OFF);
-+ }
-+ }
-+
-+ return ret;
-+}
-+
- static int iei_wt61p803_puzzle_led_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
-+ struct device_node *np = dev_of_node(dev);
-+ struct device_node *child;
- struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
- struct iei_wt61p803_puzzle_led *priv;
-- struct led_init_data init_data = {};
-- struct fwnode_handle *child;
- int ret;
-+ u32 reg;
-
-- if (device_get_child_node_count(dev) != 1)
-+ if (device_get_child_node_count(dev) > IEI_LEDS_MAX)
- return -EINVAL;
-
-- priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-- if (!priv)
-- return -ENOMEM;
--
-- priv->mcu = mcu;
-- priv->led_power_state = 1;
-- mutex_init(&priv->lock);
-- dev_set_drvdata(dev, priv);
--
-- child = device_get_next_child_node(dev, NULL);
-- init_data.fwnode = child;
--
-- priv->cdev.brightness_set_blocking = iei_wt61p803_puzzle_led_brightness_set_blocking;
-- priv->cdev.brightness_get = iei_wt61p803_puzzle_led_brightness_get;
-- priv->cdev.max_brightness = 1;
-+ for_each_available_child_of_node(np, child) {
-+ struct led_init_data init_data = {};
-
-- ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
-- if (ret)
-- dev_err(dev, "Could not register LED\n");
-+ ret = of_property_read_u32(child, "reg", ®);
-+ if (ret) {
-+ dev_err(dev, "Failed to read led 'reg' property\n");
-+ goto put_child_node;
-+ }
-+
-+ if (reg > IEI_LEDS_MAX) {
-+ dev_err(dev, "Invalid led reg %u\n", reg);
-+ ret = -EINVAL;
-+ goto put_child_node;
-+ }
-+
-+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv) {
-+ ret = -ENOMEM;
-+ goto put_child_node;
-+ }
-+
-+ mutex_init(&priv->lock);
-+
-+ dev_set_drvdata(dev, priv);
-+
-+ if (of_property_read_bool(child, "active-low"))
-+ priv->active_low = true;
-+
-+ priv->mcu = mcu;
-+ priv->id = reg;
-+ priv->led_power_state = 1;
-+ priv->blinking = 0;
-+ init_data.fwnode = of_fwnode_handle(child);
-+
-+ priv->cdev.brightness_set_blocking = iei_wt61p803_puzzle_led_brightness_set_blocking;
-+ priv->cdev.brightness_get = iei_wt61p803_puzzle_led_brightness_get;
-+ priv->cdev.blink_set = iei_wt61p803_puzzle_led_set_blink;
-+
-+ priv->cdev.max_brightness = 1;
-+
-+ INIT_WORK(&priv->work, iei_wt61p803_puzzle_led_apply_blink);
-+
-+ ret = iei_wt61p803_puzzle_led_set_dt_default(&priv->cdev, child);
-+ if (ret) {
-+ dev_err(dev, "Could apply default from DT\n");
-+ goto put_child_node;
-+ }
-+
-+ ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
-+ if (ret) {
-+ dev_err(dev, "Could not register LED\n");
-+ goto put_child_node;
-+ }
-+ }
-+
-+ return ret;
-
-- fwnode_handle_put(child);
-+put_child_node:
-+ of_node_put(child);
- return ret;
- }
-
---- a/include/linux/mfd/iei-wt61p803-puzzle.h
-+++ b/include/linux/mfd/iei-wt61p803-puzzle.h
-@@ -36,7 +36,7 @@
- #define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS 0x41 /* A */
-
- #define IEI_WT61P803_PUZZLE_CMD_LED 0x52 /* R */
--#define IEI_WT61P803_PUZZLE_CMD_LED_POWER 0x31 /* 1 */
-+#define IEI_WT61P803_PUZZLE_CMD_LED_SET(n) (0x30 | (n))
-
- #define IEI_WT61P803_PUZZLE_CMD_TEMP 0x54 /* T */
- #define IEI_WT61P803_PUZZLE_CMD_TEMP_ALL 0x41 /* A */
---- a/drivers/mfd/iei-wt61p803-puzzle.c
-+++ b/drivers/mfd/iei-wt61p803-puzzle.c
-@@ -176,6 +176,9 @@ static int iei_wt61p803_puzzle_recv_buf(
- struct iei_wt61p803_puzzle *mcu = serdev_device_get_drvdata(serdev);
- int ret;
-
-+ print_hex_dump_debug("puzzle-mcu rx: ", DUMP_PREFIX_NONE,
-+ 16, 1, data, size, false);
-+
- ret = iei_wt61p803_puzzle_process_resp(mcu, data, size);
- /* Return the number of processed bytes if function returns error,
- * discard the remaining incoming data, since the frame this data
-@@ -246,6 +249,9 @@ int iei_wt61p803_puzzle_write_command(st
-
- cmd[size - 1] = iei_wt61p803_puzzle_checksum(cmd, size - 1);
-
-+ print_hex_dump_debug("puzzle-mcu tx: ", DUMP_PREFIX_NONE,
-+ 16, 1, cmd, size, false);
-+
- /* Initialize reply struct */
- reinit_completion(&mcu->reply->received);
- mcu->reply->size = 0;
+++ /dev/null
---- a/drivers/mfd/iei-wt61p803-puzzle.c
-+++ b/drivers/mfd/iei-wt61p803-puzzle.c
-@@ -241,6 +241,7 @@ int iei_wt61p803_puzzle_write_command(st
- {
- struct device *dev = &mcu->serdev->dev;
- int ret;
-+ int retries;
-
- if (size <= 1 || size > IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH)
- return -EINVAL;
-@@ -252,24 +253,36 @@ int iei_wt61p803_puzzle_write_command(st
- print_hex_dump_debug("puzzle-mcu tx: ", DUMP_PREFIX_NONE,
- 16, 1, cmd, size, false);
-
-+ retries = 3;
- /* Initialize reply struct */
-- reinit_completion(&mcu->reply->received);
-- mcu->reply->size = 0;
-- usleep_range(2000, 10000);
-- serdev_device_write_flush(mcu->serdev);
-- ret = serdev_device_write_buf(mcu->serdev, cmd, size);
-- if (ret < 0)
-- goto exit;
--
-- serdev_device_wait_until_sent(mcu->serdev, IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
-- ret = wait_for_completion_timeout(&mcu->reply->received,
-- IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
-- if (ret == 0) {
-- dev_err(dev, "Command reply receive timeout\n");
-- ret = -ETIMEDOUT;
-- goto exit;
-+ while (retries) {
-+ reinit_completion(&mcu->reply->received);
-+ mcu->reply->size = 0;
-+ usleep_range(2000, 10000);
-+ serdev_device_write_flush(mcu->serdev);
-+ ret = serdev_device_write_buf(mcu->serdev, cmd, size);
-+ if (ret < 0)
-+ goto exit;
-+
-+ serdev_device_wait_until_sent(mcu->serdev, IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
-+ ret = wait_for_completion_timeout(&mcu->reply->received,
-+ IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
-+ retries--;
-+ if (ret == 0) {
-+ if (retries == 0) {
-+ dev_err(dev, "Command reply receive timeout\n");
-+ ret = -ETIMEDOUT;
-+ goto exit;
-+ }
-+ }
-+ else {
-+ if (mcu->reply->data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+ mcu->reply->data[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+ mcu->reply->data[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK) {
-+ break;
-+ }
-+ }
- }
--
- *reply_size = mcu->reply->size;
- /* Copy the received data, as it will not be available after a new frame is received */
- memcpy(reply_data, mcu->reply->data, mcu->reply->size);
projects / openwrt / staging / blocktrron.git / commitdiff