FEATURES:=squashfs targz ext2 usb
SUBTARGETS:=legacy sama5d3
-KERNEL_PATCHVER:=3.14
+KERNEL_PATCHVER:=3.18
include $(INCLUDE_DIR)/target.mk
CONFIG_PINCTRL_AT91=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINMUX=y
+# CONFIG_PL310_ERRATA_588369 is not set
+# CONFIG_PL310_ERRATA_727915 is not set
+# CONFIG_PL310_ERRATA_753970 is not set
+# CONFIG_PL310_ERRATA_769419 is not set
# CONFIG_PREEMPT_RCU is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_XILINX is not set
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
+++ /dev/null
-/*
- * lmu5000.dst - Device Tree file for CalAmp LMU5000 board
- *
- * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
- *
- * Licensed under GPLv2.
- */
-/dts-v1/;
-#include "at91sam9g20.dtsi"
-
-/ {
- model = "CalAmp LMU5000";
- compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
-
- chosen {
- bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
- };
-
- memory {
- reg = <0x20000000 0x4000000>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <18432000>;
- };
- };
-
- ahb {
- apb {
- pinctrl@fffff400 {
- board {
- pinctrl_pck0_as_mck: pck0_as_mck {
- atmel,pins =
- <2 1 0x2 0x0>; /* PC1 periph B */
- };
-
- };
- };
-
- dbgu: serial@fffff200 {
- status = "okay";
- };
-
- usart0: serial@fffb0000 {
- pinctrl-0 =
- <&pinctrl_usart0
- &pinctrl_usart0_rts
- &pinctrl_usart0_cts
- &pinctrl_usart0_dtr_dsr
- &pinctrl_usart0_dcd
- &pinctrl_usart0_ri>;
- status = "okay";
- };
-
- usart2: serial@fffb8000 {
- status = "okay";
- };
-
- uart0: serial@fffd4000 {
- status = "okay";
- };
-
- uart1: serial@fffd8000 {
- status = "okay";
- };
-
- macb0: ethernet@fffc4000 {
- phy-mode = "mii";
- status = "okay";
- };
-
- usb1: gadget@fffa4000 {
- atmel,vbus-gpio = <&pioC 5 0>;
- status = "okay";
- };
-
- ssc0: ssc@fffbc000 {
- status = "okay";
- pinctrl-0 = <&pinctrl_ssc0_tx>;
- };
-
- watchdog@fffffd40 {
- status = "okay";
- };
- };
-
- nand0: nand@40000000 {
- nand-bus-width = <8>;
- nand-ecc-mode = "soft";
- nand-on-flash-bbt;
- status = "okay";
-
- kernel@0 {
- label = "kernel";
- reg = <0x0 0x400000>;
- };
-
- rootfs@400000 {
- label = "rootfs";
- reg = <0x400000 0x3C00000>;
- };
-
- user1@4000000 {
- label = "user1";
- reg = <0x4000000 0x2000000>;
- };
-
- user2@6000000 {
- label = "user2";
- reg = <0x6000000 0x2000000>;
- };
- };
-
- usb0: ohci@00500000 {
- num-ports = <2>;
- status = "okay";
- };
- };
-};
+++ /dev/null
-/*
- *
- * Copyright (C) 2007 OpenWrt.org
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Atmel AT91 flash partition table. (Modified by Hamish Guthrie).
- * Based on ar7 map by Felix Fietkau.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/bootmem.h>
-#include <linux/squashfs_fs.h>
-
-static struct mtd_partition at91_parts[6];
-
-static int create_mtd_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- unsigned long origin)
-{
- unsigned int offset, len;
- unsigned int pre_size = 0x42000, root_max = 0x362400;
- unsigned char buf[512];
- struct squashfs_super_block *sb = (struct squashfs_super_block *) buf;
-
- printk("Parsing AT91 partition map...\n");
-
- at91_parts[0].name = "loaders";
- at91_parts[0].offset = 0;
- at91_parts[0].size = 0x21000;
- at91_parts[0].mask_flags = MTD_WRITEABLE;
-
- at91_parts[1].name = "ubparams";
- at91_parts[1].offset = 0x21000;
- at91_parts[1].size = 0x8400;
- at91_parts[1].mask_flags = 0;
-
- at91_parts[2].name = "kernel";
- at91_parts[2].offset = pre_size;
- at91_parts[2].size = 0;
- at91_parts[2].mask_flags = 0;
-
- at91_parts[3].name = "rootfs";
- at91_parts[3].offset = 0;
- at91_parts[3].size = 0;
- at91_parts[3].mask_flags = 0;
-
- for(offset = pre_size; offset < root_max; offset += master->erasesize) {
-
- memset(&buf, 0xe5, sizeof(buf));
-
- if (master->read(master, offset, sizeof(buf), &len, buf) || len != sizeof(buf))
- break;
-
- if (*((__u32 *) buf) == SQUASHFS_MAGIC) {
- printk(KERN_INFO "%s: Filesystem type: squashfs, size=0x%x\n",
- master->name, (u32) sb->bytes_used);
-
- at91_parts[3].size = sb->bytes_used;
- at91_parts[3].offset = offset;
- len = at91_parts[3].offset + at91_parts[3].size;
- len = ((len / (master->erasesize * 8)) + 1) * master->erasesize * 8;
- at91_parts[3].size = len - at91_parts[3].offset;
- at91_parts[2].size = offset - at91_parts[2].offset;
- break;
- }
- }
-
- if (at91_parts[3].size == 0) {
- printk(KERN_NOTICE "%s: Couldn't find root filesystem\n", master->name);
- return -1;
- }
-
- at91_parts[4].name = "rootfs_data";
- at91_parts[4].offset = root_max;
- at91_parts[4].size = master->size - root_max;
- at91_parts[4].mask_flags = 0;
-
- at91_parts[5].name = "complete";
- at91_parts[5].offset = 0;
- at91_parts[5].size = master->size;
- at91_parts[5].mask_flags = 0;
-
- *pparts = at91_parts;
- return 6;
-}
-
-static struct mtd_part_parser at91_parser = {
- .owner = THIS_MODULE,
- .parse_fn = create_mtd_partitions,
- .name = "at91part",
-};
-
-static int __init at91_parser_init(void)
-{
- register_mtd_parser(&at91_parser);
-
- return 0;
-}
-
-module_init(at91_parser_init);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Felix Fietkau, Eugene Konev, Hamish Guthrie");
-MODULE_DESCRIPTION("MTD partitioning for Atmel at91");
--- /dev/null
+/*
+ * lmu5000.dst - Device Tree file for CalAmp LMU5000 board
+ *
+ * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+ model = "CalAmp LMU5000";
+ compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ pinctrl@fffff400 {
+ board {
+ pinctrl_pck0_as_mck: pck0_as_mck {
+ atmel,pins =
+ <2 1 0x2 0x0>; /* PC1 periph B */
+ };
+
+ };
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ usart0: serial@fffb0000 {
+ pinctrl-0 =
+ <&pinctrl_usart0
+ &pinctrl_usart0_rts
+ &pinctrl_usart0_cts
+ &pinctrl_usart0_dtr_dsr
+ &pinctrl_usart0_dcd
+ &pinctrl_usart0_ri>;
+ status = "okay";
+ };
+
+ usart2: serial@fffb8000 {
+ status = "okay";
+ };
+
+ uart0: serial@fffd4000 {
+ status = "okay";
+ };
+
+ uart1: serial@fffd8000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@fffc4000 {
+ phy-mode = "mii";
+ status = "okay";
+ };
+
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioC 5 0>;
+ status = "okay";
+ };
+
+ ssc0: ssc@fffbc000 {
+ status = "okay";
+ pinctrl-0 = <&pinctrl_ssc0_tx>;
+ };
+
+ watchdog@fffffd40 {
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ kernel@0 {
+ label = "kernel";
+ reg = <0x0 0x400000>;
+ };
+
+ rootfs@400000 {
+ label = "rootfs";
+ reg = <0x400000 0x3C00000>;
+ };
+
+ user1@4000000 {
+ label = "user1";
+ reg = <0x4000000 0x2000000>;
+ };
+
+ user2@6000000 {
+ label = "user2";
+ reg = <0x6000000 0x2000000>;
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+ };
+};
--- /dev/null
+/*
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Atmel AT91 flash partition table. (Modified by Hamish Guthrie).
+ * Based on ar7 map by Felix Fietkau.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/bootmem.h>
+#include <linux/squashfs_fs.h>
+
+static struct mtd_partition at91_parts[6];
+
+static int create_mtd_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ unsigned long origin)
+{
+ unsigned int offset, len;
+ unsigned int pre_size = 0x42000, root_max = 0x362400;
+ unsigned char buf[512];
+ struct squashfs_super_block *sb = (struct squashfs_super_block *) buf;
+
+ printk("Parsing AT91 partition map...\n");
+
+ at91_parts[0].name = "loaders";
+ at91_parts[0].offset = 0;
+ at91_parts[0].size = 0x21000;
+ at91_parts[0].mask_flags = MTD_WRITEABLE;
+
+ at91_parts[1].name = "ubparams";
+ at91_parts[1].offset = 0x21000;
+ at91_parts[1].size = 0x8400;
+ at91_parts[1].mask_flags = 0;
+
+ at91_parts[2].name = "kernel";
+ at91_parts[2].offset = pre_size;
+ at91_parts[2].size = 0;
+ at91_parts[2].mask_flags = 0;
+
+ at91_parts[3].name = "rootfs";
+ at91_parts[3].offset = 0;
+ at91_parts[3].size = 0;
+ at91_parts[3].mask_flags = 0;
+
+ for(offset = pre_size; offset < root_max; offset += master->erasesize) {
+
+ memset(&buf, 0xe5, sizeof(buf));
+
+ if (master->read(master, offset, sizeof(buf), &len, buf) || len != sizeof(buf))
+ break;
+
+ if (*((__u32 *) buf) == SQUASHFS_MAGIC) {
+ printk(KERN_INFO "%s: Filesystem type: squashfs, size=0x%x\n",
+ master->name, (u32) sb->bytes_used);
+
+ at91_parts[3].size = sb->bytes_used;
+ at91_parts[3].offset = offset;
+ len = at91_parts[3].offset + at91_parts[3].size;
+ len = ((len / (master->erasesize * 8)) + 1) * master->erasesize * 8;
+ at91_parts[3].size = len - at91_parts[3].offset;
+ at91_parts[2].size = offset - at91_parts[2].offset;
+ break;
+ }
+ }
+
+ if (at91_parts[3].size == 0) {
+ printk(KERN_NOTICE "%s: Couldn't find root filesystem\n", master->name);
+ return -1;
+ }
+
+ at91_parts[4].name = "rootfs_data";
+ at91_parts[4].offset = root_max;
+ at91_parts[4].size = master->size - root_max;
+ at91_parts[4].mask_flags = 0;
+
+ at91_parts[5].name = "complete";
+ at91_parts[5].offset = 0;
+ at91_parts[5].size = master->size;
+ at91_parts[5].mask_flags = 0;
+
+ *pparts = at91_parts;
+ return 6;
+}
+
+static struct mtd_part_parser at91_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = create_mtd_partitions,
+ .name = "at91part",
+};
+
+static int __init at91_parser_init(void)
+{
+ register_mtd_parser(&at91_parser);
+
+ return 0;
+}
+
+module_init(at91_parser_init);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Felix Fietkau, Eugene Konev, Hamish Guthrie");
+MODULE_DESCRIPTION("MTD partitioning for Atmel at91");
+++ /dev/null
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -26,6 +26,7 @@ dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
- dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb
- # sam9g45
- dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
-+dtb-$(CONFIG_ARCH_AT91) += lmu5000.dtb
- dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
- # sam9n12
- dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
+++ /dev/null
---- a/arch/arm/mach-at91/at91sam9260_devices.c
-+++ b/arch/arm/mach-at91/at91sam9260_devices.c
-@@ -507,7 +507,7 @@ static struct platform_device at91sam926
- .num_resources = ARRAY_SIZE(spi1_resources),
- };
-
--static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
-+static const unsigned spi1_standard_cs[2] = { AT91_PIN_PB3, AT91_PIN_PC5 };
-
- void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
- {
+++ /dev/null
---- a/arch/arm/mach-at91/board-flexibity.c
-+++ b/arch/arm/mach-at91/board-flexibity.c
-@@ -89,49 +89,49 @@ static struct gpio_led flexibity_leds[]
- .name = "usb1:green",
- .gpio = AT91_PIN_PA12,
- .active_low = 1,
-- .default_trigger = "default-on",
-+ .default_trigger = "heartbeat",
- },
- {
- .name = "usb1:red",
- .gpio = AT91_PIN_PA13,
- .active_low = 1,
-- .default_trigger = "default-on",
-+ .default_trigger = "heartbeat",
- },
- {
- .name = "usb2:green",
- .gpio = AT91_PIN_PB26,
- .active_low = 1,
-- .default_trigger = "default-on",
-+ .default_trigger = "heartbeat",
- },
- {
- .name = "usb2:red",
- .gpio = AT91_PIN_PB27,
- .active_low = 1,
-- .default_trigger = "default-on",
-+ .default_trigger = "heartbeat",
- },
- {
- .name = "usb3:green",
- .gpio = AT91_PIN_PC8,
- .active_low = 1,
-- .default_trigger = "default-on",
-+ .default_trigger = "heartbeat",
- },
- {
- .name = "usb3:red",
- .gpio = AT91_PIN_PC6,
- .active_low = 1,
-- .default_trigger = "default-on",
-+ .default_trigger = "heartbeat",
- },
- {
- .name = "usb4:green",
- .gpio = AT91_PIN_PB4,
- .active_low = 1,
-- .default_trigger = "default-on",
-+ .default_trigger = "heartbeat",
- },
- {
- .name = "usb4:red",
- .gpio = AT91_PIN_PB5,
- .active_low = 1,
-- .default_trigger = "default-on",
-+ .default_trigger = "heartbeat",
- }
- };
-
--- /dev/null
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -26,6 +26,7 @@ dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
+ dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb
+ # sam9g45
+ dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
++dtb-$(CONFIG_ARCH_AT91) += lmu5000.dtb
+ dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
+ # sam9n12
+ dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
--- /dev/null
+--- a/arch/arm/mach-at91/at91sam9260_devices.c
++++ b/arch/arm/mach-at91/at91sam9260_devices.c
+@@ -507,7 +507,7 @@ static struct platform_device at91sam926
+ .num_resources = ARRAY_SIZE(spi1_resources),
+ };
+
+-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
++static const unsigned spi1_standard_cs[2] = { AT91_PIN_PB3, AT91_PIN_PC5 };
+
+ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+ {
--- /dev/null
+--- a/arch/arm/mach-at91/board-flexibity.c
++++ b/arch/arm/mach-at91/board-flexibity.c
+@@ -89,49 +89,49 @@ static struct gpio_led flexibity_leds[]
+ .name = "usb1:green",
+ .gpio = AT91_PIN_PA12,
+ .active_low = 1,
+- .default_trigger = "default-on",
++ .default_trigger = "heartbeat",
+ },
+ {
+ .name = "usb1:red",
+ .gpio = AT91_PIN_PA13,
+ .active_low = 1,
+- .default_trigger = "default-on",
++ .default_trigger = "heartbeat",
+ },
+ {
+ .name = "usb2:green",
+ .gpio = AT91_PIN_PB26,
+ .active_low = 1,
+- .default_trigger = "default-on",
++ .default_trigger = "heartbeat",
+ },
+ {
+ .name = "usb2:red",
+ .gpio = AT91_PIN_PB27,
+ .active_low = 1,
+- .default_trigger = "default-on",
++ .default_trigger = "heartbeat",
+ },
+ {
+ .name = "usb3:green",
+ .gpio = AT91_PIN_PC8,
+ .active_low = 1,
+- .default_trigger = "default-on",
++ .default_trigger = "heartbeat",
+ },
+ {
+ .name = "usb3:red",
+ .gpio = AT91_PIN_PC6,
+ .active_low = 1,
+- .default_trigger = "default-on",
++ .default_trigger = "heartbeat",
+ },
+ {
+ .name = "usb4:green",
+ .gpio = AT91_PIN_PB4,
+ .active_low = 1,
+- .default_trigger = "default-on",
++ .default_trigger = "heartbeat",
+ },
+ {
+ .name = "usb4:red",
+ .gpio = AT91_PIN_PB5,
+ .active_low = 1,
+- .default_trigger = "default-on",
++ .default_trigger = "heartbeat",
+ }
+ };
+
# CONFIG_SOC_SAM_V4_V5 is not set
CONFIG_SOC_SAM_V7=y
CONFIG_SOC_SAMA5D3=y
+CONFIG_SOC_SAMA5D4=y
CONFIG_MACH_SAMA5_DT=y
# CONFIG_ARM_LPAE is not set
# CONFIG_ARM_THUMBEE is not set
projects / openwrt / staging / zorun.git / commitdiff