This ports support for the TL-WA901ND v4 and v5 from ar71xx to ath79.
They are similar to the TP9343-based TL-WR940N v3/v4 and TL-WR941ND v6.
Specifications:
SoC: TP9343
Flash/RAM: 4/32 MiB
CPU: 750 MHz
WiFi: 2.4 GHz b/g/n
Ethernet: 1 port (100M)
Flashing instructions:
Upload the factory image via the vendor firmware upgrade option.
Flash instruction (TFTP):
1. Set PC to fixed ip address 192.168.0.66
2. Download *-factory.bin image and rename it to * (see below)
3. Start a tftp server with the image file in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.
* The image name for TFTP recovery is wa901ndv4_tp_recovery.bin for
both variants.
In ar71xx, a MAC address with offset 1 was used for ethernet port.
That's probably wrong, but this commit sticks to it until we know
the correct value.
Like in ar71xx, this builds the default factory.bin with EU country
code.
Thanks to Leonardo Weiss for testing on the v5.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "tp9343_tplink_tl-wa901nd.dtsi"
+
+/ {
+ compatible = "tplink,tl-wa901nd-v4", "qca,tp9343";
+ model = "TP-Link TL-WA901ND v4";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "tp9343_tplink_tl-wa901nd.dtsi"
+
+/ {
+ compatible = "tplink,tl-wa901nd-v5", "qca,tp9343";
+ model = "TP-Link TL-WA901ND v5";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "tp9343_tplink_tl-wx.dtsi"
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "tp-link:green:system";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ qss {
+ label = "tp-link:green:qss";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "tp-link:green:lan";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "tp-link:green:wlan";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca956x.dtsi"
+#include "tp9343_tplink_tl-wx.dtsi"
/ {
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
- aliases {
- label-mac-device = &wmac;
- };
-
keys {
compatible = "gpio-keys";
};
};
};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition@0 {
- label = "u-boot";
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- partition@20000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x020000 0x3d0000>;
- };
-
- art: partition@3f0000 {
- label = "art";
- reg = <0x3f0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-ð0 {
- status = "okay";
-
- phy-handle = <&swphy4>;
-
- mtd-mac-address = <&uboot 0x1fc00>;
- mtd-mac-address-increment = <1>;
-};
-
-ð1 {
- status = "okay";
-};
-
-&wmac {
- status = "okay";
-
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&uboot 0x1fc00>;
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+ aliases {
+ label-mac-device = &wmac;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x3d0000>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
endef
TARGET_DEVICES += tplink_tl-wa901nd-v2
+define Device/tplink_tl-wa901nd-v4
+ $(Device/tplink-4mlzma)
+ SOC := tp9343
+ DEVICE_MODEL := TL-WA901ND
+ DEVICE_VARIANT := v4
+ TPLINK_HWID := 0x09010004
+ SUPPORTED_DEVICES += tl-wa901nd-v4
+ IMAGE/factory.bin := tplink-v1-image factory -C EU
+endef
+TARGET_DEVICES += tplink_tl-wa901nd-v4
+
+define Device/tplink_tl-wa901nd-v5
+ $(Device/tplink-4mlzma)
+ SOC := tp9343
+ DEVICE_MODEL := TL-WA901ND
+ DEVICE_VARIANT := v5
+ TPLINK_HWID := 0x09010005
+ SUPPORTED_DEVICES += tl-wa901nd-v5
+ IMAGE/factory.bin := tplink-v1-image factory -C EU
+endef
+TARGET_DEVICES += tplink_tl-wa901nd-v5
+
define Device/tplink_tl-wr703n
$(Device/tplink-4mlzma)
SOC := ar9331
tplink,tl-wa801nd-v1|\
tplink,tl-wa830re-v1|\
tplink,tl-wa860re-v1|\
-tplink,tl-wa901nd-v1)
+tplink,tl-wa901nd-v1|\
+tplink,tl-wa901nd-v4|\
+tplink,tl-wa901nd-v5)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
;;
tplink,tl-mr3420-v2|\
tplink,tl-wa860re-v1|\
tplink,tl-wa901nd-v1|\
tplink,tl-wa901nd-v2|\
+ tplink,tl-wa901nd-v4|\
+ tplink,tl-wa901nd-v5|\
tplink,tl-wr703n)
ucidef_set_interface_lan "eth0"
;;